[Pkg-hpijs-devel] Bug#500207: hpijs: Error 'unable to read device-id' in logs

[Frans Pop]

Package: hpijs
Version: 2.8.6.b-1
Severity: normal

With recent print jobs (I only seldomly use my printer) I'm seeing the
following error in the syslog:
Sep 26 08:56:39 faramir kernel: ppdev0: registered pardevice
Sep 26 08:56:41 faramir kernel: ppdev0: registered pardevice
Sep 26 08:56:41 faramir hpijs: io/hpmud/pp.c 627: unable to read device-id ret=-110
Sep 26 08:56:41 faramir hpijs: io/hpmud/pp.c 627: unable to read device-id ret=-110
Sep 26 08:57:48 faramir kernel: ppdev0: unregistered pardevice
Sep 26 08:57:54 faramir kernel: ppdev0: unregistered pardevice


-- Package-specific info:

HP Linux Imaging and Printing System (ver. 2.8.6b)
Dependency/Version Check Utility ver. 14.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP
supplied tarball (.tar.gz or .run) to determine if the proper dependencies are        
installed to successfully compile HPLIP.                                              
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied 
package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper   
dependencies installed to successfully run.                                           
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will     
check both of the above cases (both compile- warning: Invalid ppd_dir value: None
error: NOT FOUND OR FAILED TO LOAD!
error: SIP not installed or version not found.
error: Version: (Not available. CUPS may not be installed or not running.)
and run-time dependencies).              

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux faramir 2.6.27-rc7 #17 SMP Mon Sep 22 06:01:38 CEST 2008 x86_64 GNU/Linux

Distribution:
debian unstable

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.5.2 installed

Checking PyQt version...

Checking SIP version...

Checking for CUPS...
Status: scheduler is running

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0


------------------------
| RUNTIME DEPENDENCIES |
------------------------


Checking for dependency: cups - Common Unix Printing System...
OK, found.

Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning witherror: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
 hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt - Qt interface for Python...

Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.

Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 2.8.6b currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=2.8.6b

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=2.8.6.20b


-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


hpp1100
-------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/par/PHOTOSMART_P1100?device=/dev/parport0
PPD: /etc/cups
HP Linux Imaging and Printing System (ver. 2.8.6b)
System Tray Status Service ver. 0.1

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Traceback (most recent call last):
  File "/usr/bin/hp-systray", line 139, in <module>
    from ui import systemtray_qt3
  File "/usr/share/hplip/ui/systemtray_qt3.py", line 33, in <module>
    from ui_utils import load_pixmap
  File "/usr/share/hplip/ui/ui_utils.py", line 32, in <module>
    from qt import *
ImportError: No module named qt
warning: Unable to connect to dbus. Is hp-systray running?
error: Unable to communicate with device (code=12): hp:/par/PHOTOSMART_P1100?device=/dev/parport0
error: Device not found

HP Linux Imaging and Printing System (ver. 2.8.6b)
System Tray Status Service ver. 0.1

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Traceback (most recent call last):
  File "/usr/bin/hp-systray", line 139, in <module>
    from ui import systemtray_qt3
  File "/usr/share/hplip/ui/systemtray_qt3.py", line 33, in <module>
    from ui_utils import load_pixmap
  File "/usr/share/hplip/ui/ui_utils.py", line 32, in <module>
    from qt import *
ImportError: No module named qt
warning: Unable to connect to dbus. Is hp-systray running?
error: Unable to communicate with device (code=12): hp:/par/PHOTOSMART_P1100?device=/dev/parport0
error: Device not found
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
/ppd/hpp1100.ppd
PPD Description: HP PhotoSmart P1100 Foomatic/hpijs (recommended)
Printer status: printer hpp1100 is idle.  enabled since Fri 26 Sep 2008 08:57:54 AM CEST

hpp1100-remote
--------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/par/PHOTOSMART_P1100?device=/dev/parport0


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...

------error: 10 errors and/or warnings.
-----------
| USB I/O SETUP |
-----------------


Checking for permissions of USB attached printers...

-----------
| SUMMARY |
-----------


Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.27-rc7 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages hpijs depends on:
ii  cupsddk               1.2.3-4            CUPS Driver Development Kit
ii  foomatic-filters      3.0.2-20080211-3.1 OpenPrinting printer support - fil
ii  ghostscript           8.62.dfsg.1-3.1    The GPL Ghostscript PostScript/PDF
ii  hplip                 2.8.6.b-1          HP Linux Printing and Imaging Syst
ii  libc6                 2.7-13             GNU C Library: Shared libraries
ii  libgcc1               1:4.3.2-1          GCC support library
ii  libjpeg62             6b-14              The Independent JPEG Group's JPEG 
ii  libssl0.9.8           0.9.8g-13          SSL shared libraries
ii  libstdc++6            4.3.2-1            The GNU Standard C++ Library v3

hpijs recommends no packages.

Versions of packages hpijs suggests:
pn  hpijs-ppds                    <none>     (no description available)
pn  hplip-doc                     <none>     (no description available)

-- no debconf information