[Pkg-hpijs-devel] Bug#522543: reportbug against hplip

Sun Oct 4 10:17:27 UTC 2009

Package: hplip
Severity: normal

As ask by Mark I make a reportbug against hplip.

I don't know if the bug still exists. I have always a file in /etc/udev/dev.d/
named z60_libsane.rules.dpkg-old which contains the rule mentioned in
my first mail about this bug.

Francois

-- Package-specific info:
error: Version: (Not available. CUPS may not be installed or not running.)

HP Linux Imaging and Printing System (ver. 3.9.4b)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball      
(.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.       
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm,   
etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.   
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above    
cases (both compile- and run-time dependencies).                                                             

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux mcfm4 2.6.30-1-686 #1 SMP Sat Aug 15 19:11:58 UTC 2009 i686 GNU/Linux

Distribution:
debian testing

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.5.4 installed

Checking PyQt 4.x version...
OK, version 4.4.4 installed.

Checking for CUPS...
Status: scheduler is running

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------
| RUNTIME DEPENDENCIES |
------------------------

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python ctypes - A foreign function library for Python...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.9.4b currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.9.4b

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
cups-ppd-install=no
cups-drv-install=yes
internal-tag=3.9.4b.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 10/04/09warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
error: 2 errors and/or warnings.
 12:07:27
version = 3.9.4b.10

-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                   Model                
  -------------------------------------------  ---------------------
  hp:/usb/PSC_1600_series?serial=MY562D2012L0  HP PSC 1600 series   

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP_PSC_1600_series_USB_1
------------------------
Type: Unknown
Device URI: usb://HP/PSC%201600%20series?serial=MY562D2012L0
PPD: /etc/cups/ppd/HP_PSC_1600_series_USB_1.ppd
PPD Description: HP PSC 1600 series Foomatic/hpijs, hpijs 2.8.6b
Printer status: printer HP_PSC_1600_series_USB_1 is idle.  enabled since Thu Oct  1 18:48:32 2009

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/PSC_1600_series?serial=MY562D2012L0' is a Hewlett-Packard PSC_1600_series all-in-one

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x4811 at 002:002: 
    Device URI: hp:/usb/PSC_1600_series?serial=MY562D2012L0
    Device node: /dev/bus/usb/002/002
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/002/002
# owner: root
# group: lp
user::rw-
user:fmescam:rw-
group::rw-
mask::rw-
other::r--

---------------
| USER GROUPS |
---------------

fmescam adm dialout fax cdrom floppy tape audio dip video plugdev lpadmin scanner netdev powerdev vboxusers fuse

-----------
| SUMMARY |
-----------

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (900, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages hplip depends on:
ii  adduser                    3.111         add and remove users and groups
ii  coreutils                  7.4-2         The GNU core utilities
ii  cups                       1.3.11-1+b1   Common UNIX Printing System(tm) - 
ii  hplip-data                 3.9.4b-1      HP Linux Printing and Imaging - da
ii  libc6                      2.9-25        GNU C Library: Shared libraries
ii  libcups2                   1.3.11-1+b1   Common UNIX Printing System(tm) - 
ii  libdbus-1-3                1.2.16-2      simple interprocess messaging syst
ii  libsane                    1.0.20-7      API library for scanners
ii  libsnmp15                  5.4.1~dfsg-12 SNMP (Simple Network Management Pr
ii  libssl0.9.8                0.9.8k-5      SSL shared libraries
ii  libusb-0.1-4               2:0.1.12-13   userspace USB programming library
ii  lsb-base                   3.2-23        Linux Standard Base 3.2 init scrip
ii  policykit                  0.9-4         framework for managing administrat
ii  python                     2.5.4-2       An interactive high-level object-o
ii  python-dbus                0.83.0-1      simple interprocess messaging syst
ii  python-imaging             1.1.6-3.1     Python Imaging Library

Versions of packages hplip recommends:
ii  cups-client                  1.3.11-1+b1 Common UNIX Printing System(tm) - 
ii  hpijs                        3.9.4b-1    HP Linux Printing and Imaging - gs
ii  sane-utils                   1.0.20-7    API library for scanners -- utilit

Versions of packages hplip suggests:
ii  hplip-doc                     3.9.4b-1   HP Linux Printing and Imaging - do
ii  hplip-gui                     3.9.4b-1   HP Linux Printing and Imaging - GU
pn  kdeprint | gtklp | xpp        <none>     (no description available)
ii  openprinting-ppds             20090616-1 OpenPrinting printer support - Pos

-- no debconf information