[Pkg-hpijs-devel] Bug#588015: Bug#588015: hplip: printing while unplugged/off says succeeds; hpcups filter response to run cupsenable should be automatic

Sun Jul 4 03:32:10 UTC 2010

On Sun, 4 Jul 2010, Mark Purcell wrote:
>
> Btw, could I ask you to use the reportbug(1) for future
> reports as that will also provide some further detail on
> your configuration which greatly assists with debug.
> (hp-check et al)

Uhh, I did use reportbug.  I guess it's not offering to run
hp-check anymore.  Should I file another bug?  ;-)

Here's the output of `hpcheck -r` as my user.  Thanks.  --mark--

hedges at maggie:~$ hp-check -r

HP Linux Imaging and Printing System (ver. 3.10.5)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied
tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully
compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb,
.rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the
above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux maggie.scriptdolphin.com 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686 GNU/Linux

Distribution:
debian testing

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.3 installed.

Checking for CUPS...
Status: scheduler is running
warning: Version: (Not available - cups-config. Unable to determine installed version of CUPS.)
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.1

------------------------
| RUNTIME DEPENDENCIES |
------------------------

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.10.5 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.10.5

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.4.16
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = Deskjet_D2600_series
working_dir = .
device_uri = "hp:/usb/Deskjet_D2600_series?serial=TH964241X505C9"

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.10.4.16
date_time = 07/03/2010 20:31:11

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                Model
  ----------------------------------------  -----------------------
  hp:/usb/Deskjet_D2600_series?serial=TH96  HP Deskjet D2600 series
  4241X505C9

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Deskjet_D2600_series
--------------------
Type: Printer
Device URI: hp:/usb/Deskjet_D2600_series?serial=TH964241X505C9
PPD: /etc/cups/ppd/Deskjet_D2600_series.ppd
PPD Description: HP Deskjet d2600 Series, hpcups 3.10.5
Printer ready to printr Deskjet_D2600_series is idle.  enabled since Sat 03 Jul 2010 08:16:32 PM PDT
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x8011 at 001:019:
    Device URI: hp:/usb/Deskjet_D2600_series?serial=TH964241X505C9
    Device node: /dev/bus/usb/001/019
    Mode: 0664

---------------
| USER GROUPS |
---------------

hedges lp dialout cdrom floppy sudo audio www-data video plugdev comtved netdev lpadmin powerdev comtvsys

User member of group 'lp'. Enables print/ scan/ fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 1 error or warning.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.