[Pkg-hpijs-devel] Bug#598516: hplip: HP6110 not connecting when in standy-mode
Wolfgang Schnitker
wolfgang.schnitker at gmx.de
Wed Sep 29 16:13:51 UTC 2010
Package: hplip
Version: 3.10.6-1
Severity: normal
When my HP6110 Multifunction device is in Stand-By Mode, a connection for
scanning is not possible. I have to switch off and on again to make it work.
Device is connected through USB, but also attachable via NET Protocol.
Neither of them work.
-- Package-specific info:
warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.)
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
HP Linux Imaging and Printing System (ver. 3.10.6)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux rocket2 2.6.32-5-amd64 #1 SMP Fri Sep 17 21:50:19 UTC 2010 x86_64 GNU/Linux
Distribution:
debian testing
Checking Python version...
OK, version 2.6.6 installed
Checking PyQt 4.x version...
OK, version 4.7.3 installed.
Checking for CUPS...
Status: scheduler is running
error_log is set to level: debug
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.1
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS DDK - CUPS driver development kit...
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.10.6 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.10.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.6.15
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' fiwarning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
error: Unable to communicate with device (code=12): hp:/par/DESKJET_690C?device=/dev/parport0
error: Device not found
error: Communication status: Failed
error: User needs to be member of group 'lpadmin' to manage printers.
error: 3 errors and/or warnings.
le:
[last_used]
printer_name = OfficeJet_6100
working_dir = .
device_uri = "hp:/par/DESKJET_690C?device=/dev/parport0"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.10.6.15
date_time = 09/29/10 18:11:05
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address = Wolfgang.schnitker at gmx.de
voice_phone = +49 7389 90297
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ------------------------
hp:/usb/OfficeJet_6100_Series?se HP OfficeJet 6100 Series
rial=MY47SJ33W22R
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
C5750
-----
Type: Unknown
Device URI: socket://192.168.178.23
PPD: /etc/cups/ppd/C5750.ppd
PPD Description: Oki C5750 Foomatic/Postscript (recommended)
Printer status: printer C5750 is idle. enabled since Tue Sep 28 14:12:47 2010
HP_DESKJET_690C
---------------
Type: Printer
Device URI: hp:/par/DESKJET_690C?device=/dev/parport0
PPD: /etc/cups/ppd/HP_DESKJET_690C.ppd
PPD Description: HP DeskJet 694C Foomatic/pcl3
Printer status: printer HP_DESKJET_690C is idle. enabled since Sat Sep 12 18:42:44 2009
OfficeJet_6100
--------------
Type: Printer
Device URI: hp:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R
PPD: /etc/cups/ppd/OfficeJet_6100.ppd
PPD Description: HP Officejet 6100 Series, hpcups 3.10.6
Printer status: printer OfficeJet_6100 is idle. enabled since Mon Jul 26 11:25:02 2010
Communication status: Good
OfficeJet_6100_fax
------------------
Type: Fax
Device URI: hpfax:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R
PPD: /etc/cups/ppd/OfficeJet_6100_fax.ppd
PPD Description: HP Fax hpcups
Printer status: printer OfficeJet_6100_fax is idle. enabled since Mon Jul 26 11:11:19 2010
Communication status: Good
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `net:localhost:hpaio:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R' is a Hewlett-Packard OfficeJet_6100_Series all-in-one
device `hpaio:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R' is a Hewlett-Packard OfficeJet_6100_Series all-in-one
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x2d11 at 002:002:
Device URI: hp:/usb/OfficeJet_6100_Series?serial=MY47SJ33W22R
Device node: /dev/bus/usb/002/002
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/002/002
# owner: root
# group: lp
user::rw-
user:wolfgang:rw-
group::rw-
mask::rw-
other::r--
---------------
| USER GROUPS |
---------------
wolfgang lp dialout cdrom floppy audio video plugdev scanner netdev powerdev
User member of group 'lp'. Enables print/ scan/ fax.
-----------
| SUMMARY |
-----------
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages hplip depends on:
ii adduser 3.112 add and remove users and groups
ii coreutils 8.5-1 GNU core utilities
ii cups 1.4.4-3 Common UNIX Printing System(tm) -
ii cups-client 1.4.4-3 Common UNIX Printing System(tm) -
ii hplip-cups 3.10.6-1 HP Linux Printing and Imaging - CU
ii hplip-data 3.10.6-1 HP Linux Printing and Imaging - da
ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib
ii libcups2 1.4.4-3 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.2.24-3 simple interprocess messaging syst
ii libhpmud0 3.10.6-1 HP Multi-Point Transport Driver (h
ii libsane 1.0.21-4 API library for scanners
ii libsane-hpaio 3.10.6-1 HP SANE backend for multi-function
ii libssl0.9.8 0.9.8o-2 SSL shared libraries
ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip
ii policykit-1 0.96-3 framework for managing administrat
ii python 2.6.5-13 interactive high-level object-orie
ii python-dbus 0.83.1-1 simple interprocess messaging syst
ii python-imaging 1.1.7-2 Python Imaging Library
ii python-pexpect 2.3-1 Python module for automating inter
ii python-support 1.0.10 automated rebuilding support for P
Versions of packages hplip recommends:
ii avahi-daemon 0.6.27-2 Avahi mDNS/DNS-SD daemon
ii sane-utils 1.0.21-4 API library for scanners -- utilit
Versions of packages hplip suggests:
ii gtklp 1.2.7-2.1 printing tool for CUPS on the GNOM
pn hplip-doc <none> (no description available)
ii hplip-gui 3.10.6-1 HP Linux Printing and Imaging - GU
ii python-notify 0.1.1-2+b2 Python bindings for libnotify
-- no debconf information
More information about the Pkg-hpijs-devel
mailing list