[Pkg-hpijs-devel] Bug#682694: libsane-hpaio: hp-scan : Unable to set option resolution with Photosmart C6300

[hugeanes]

Package: libsane-hpaio
Version: 3.12.6-3
Severity: normal

Dear Maintainer,

No scan resolution available on xsane application, and hp-scan shows "Unable to
set option resolution" and "Unable to set option source to value Flatbed".
Meanwhile scanning are performed, probably at 300dpi by default.

I encounter the same problem on my 3 PC Debian testing.
I suppose that the issue came with hplip 3.12.6.
I configured the printer (well, I hope) with hp-check + hp-setup.

Here is a hp-scan trace :

HP Linux Imaging and Printing System (ver. 3.12.6)
Scan Utility ver. 2.2

Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

hp-scan[4057]: debug: getDeviceUri(None, None, ['hpaio'], {'scan-type':
(<built-in function gt>, 0)}, , True)
hp-scan[4057]: debug: Mode=0
hp-scan[4057]: debug: hp:/net/Photosmart_C6300_series?zc=hpimp: back_end:hp
is_hp:True bus:net model:Photosmart_C6300_series serial: dev_file: host:hpimp
zc:hpimp port:1
hp-scan[4057]: debug: Cache miss: photosmart_c6300_series
hp-scan[4057]: debug: Reading file: /usr/share/hplip/data/models/models.dat
hp-scan[4057]: debug: Searching for section [photosmart_c6300_series] in file
/usr/share/hplip/data/models/models.dat
hp-scan[4057]: debug: Found section [photosmart_c6300_series] in file
/usr/share/hplip/data/models/models.dat
hp-scan[4057]: debug: {'hpaio:/net/Photosmart_C6300_series?zc=hpimp':
['Photosmart_C6300']}
Using device: hpaio:/net/Photosmart_C6300_series?zc=hpimp

warning: Output file '/tmp/img.png' exists. File will be overwritten.
Using device hpaio:/net/Photosmart_C6300_series?zc=hpimp
Opening connection to device...
hp-scan[4057]: debug: Device supported resolutions [75, 100, 150, 200, 300,
600, 1200, 2400, 4800]

Resolution: 600dpi
Mode: gray
Compression: JPEG
Scan area (mm):
  Top left (x,y): (0.000000mm, 0.000000mm)
  Bottom right (x,y): (215.899994mm, 296.925995mm)
  Width: 215.899994mm
  Height: 296.925995mm
Destination(s): file
Output file: /tmp/img.png
error: Unable to set option resolution to value 600
hp-scan[4057]: debug: Supported source Options: [] size=0
error: Unable to set option source to value Flatbed

Warming up...
Scanning...
.....

hp-scan[4057]: debug: Read 558888 bytes
hp-scan[4057]: debug: Read 559526 bytes
hp-scan[4057]: debug: Scan thread exiting...

Read 546.4 KB from scanner.
hp-scan[4057]: debug: PPL=638 lines=877 depth=8 BPL=638 pad=0 total=559526
Closing device.
Outputting to destination 'file':
Saving to file /tmp/img.png
Done.

Regards, Alain



-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/1 CPU core)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages libsane-hpaio depends on:
ii  libc6        2.13-33
ii  libcups2     1.5.3-1
ii  libdbus-1-3  1.6.0-1
ii  libhpmud0    3.12.6-3
ii  libssl1.0.0  1.0.1c-3

Versions of packages libsane-hpaio recommends:
ii  hplip       3.12.6-3
ii  sane-utils  1.0.22-7.1

libsane-hpaio suggests no packages.

-- no debconf information