rev 3452 - kde-extras/rsibreak/trunk/debian/patches
Tom Albers
tomalbers-guest at costa.debian.org
Sat Apr 1 20:10:26 UTC 2006
Author: tomalbers-guest
Date: 2006-04-01 20:10:22 +0000 (Sat, 01 Apr 2006)
New Revision: 3452
Modified:
kde-extras/rsibreak/trunk/debian/patches/98_buildprep.diff
Log:
buildprep update for 0.6.0
Modified: kde-extras/rsibreak/trunk/debian/patches/98_buildprep.diff
===================================================================
--- kde-extras/rsibreak/trunk/debian/patches/98_buildprep.diff 2006-04-01 19:37:57 UTC (rev 3451)
+++ kde-extras/rsibreak/trunk/debian/patches/98_buildprep.diff 2006-04-01 20:10:22 UTC (rev 3452)
@@ -1,50 +1,5 @@
#DPATCHLEVEL=0
# vi: ft=diff
---- Makefile.in
-+++ Makefile.in
-@@ -210,6 +210,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -354,7 +357,7 @@
- .SUFFIXES:
- am--refresh:
- @:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/admin/deps.am $(srcdir)/admin/Doxyfile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/admin/deps.am $(srcdir)/admin/Doxyfile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -396,12 +399,12 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- #>- cd $(srcdir) && $(AUTOCONF)
- #>+ 2
- cd $(srcdir) && rm -f configure
- cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
- config.h: stamp-h1
-@@ -413,7 +416,7 @@
- stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
--$(srcdir)/config.h.in: $(am__configure_deps)
-+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f stamp-h1
- touch $@
--- acinclude.m4
+++ acinclude.m4
@@ -2144,9 +2144,6 @@
@@ -57,7 +12,7 @@
AC_TRY_COMPILE([
$2
],
-@@ -5970,30 +5967,15 @@
+@@ -5973,30 +5970,15 @@
fi
])
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
@@ -93,7 +48,7 @@
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-@@ -6053,7 +6035,7 @@
+@@ -6056,7 +6038,7 @@
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
# Always use our own libtool.
@@ -102,7 +57,7 @@
AC_SUBST(LIBTOOL)dnl
# Prevent multiple expansion
-@@ -6103,7 +6085,7 @@
+@@ -6106,7 +6088,7 @@
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
@@ -111,7 +66,7 @@
[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
# Same as above, but do not quote variable references.
-@@ -6123,7 +6105,7 @@
+@@ -6126,7 +6108,7 @@
default_ofile=libtool
can_build_shared=yes
@@ -120,7 +75,7 @@
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
-@@ -6171,6 +6153,8 @@
+@@ -6174,6 +6156,8 @@
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
@@ -129,7 +84,7 @@
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
-@@ -6216,6 +6200,48 @@
+@@ -6219,6 +6203,48 @@
])# _LT_AC_SYS_COMPILER
@@ -178,7 +133,7 @@
# _LT_AC_SYS_LIBPATH_AIX
# ----------------------
# Links a minimal program and checks the executable
-@@ -6288,15 +6314,15 @@
+@@ -6291,15 +6317,15 @@
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
@@ -197,7 +152,7 @@
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
-@@ -6465,14 +6491,13 @@
+@@ -6468,14 +6494,13 @@
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
@@ -214,7 +169,7 @@
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
-@@ -6484,7 +6509,6 @@
+@@ -6487,7 +6512,6 @@
esac
;;
*64-bit*)
@@ -222,7 +177,7 @@
case $host in
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
-@@ -6549,7 +6573,7 @@
+@@ -6552,7 +6576,7 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -231,7 +186,7 @@
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-@@ -6559,8 +6583,10 @@
+@@ -6562,8 +6586,10 @@
echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
@@ -244,7 +199,7 @@
$2=yes
fi
fi
-@@ -6586,11 +6612,16 @@
+@@ -6589,11 +6615,16 @@
LDFLAGS="$LDFLAGS $3"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -262,7 +217,7 @@
else
$2=yes
fi
-@@ -6614,7 +6645,7 @@
+@@ -6617,7 +6648,7 @@
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
@@ -271,7 +226,7 @@
case $build_os in
msdosdjgpp*)
-@@ -6643,20 +6674,53 @@
+@@ -6646,20 +6677,53 @@
lt_cv_sys_max_cmd_len=8192;
;;
@@ -331,7 +286,7 @@
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
-@@ -6752,7 +6816,7 @@
+@@ -6755,7 +6819,7 @@
}]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -340,7 +295,7 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
-@@ -6806,7 +6870,7 @@
+@@ -6809,7 +6873,7 @@
lt_cv_dlopen_self=yes
])
;;
@@ -349,7 +304,7 @@
*)
AC_CHECK_FUNC([shl_load],
[lt_cv_dlopen="shl_load"],
-@@ -6895,20 +6959,13 @@
+@@ -6898,20 +6962,13 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -371,7 +326,7 @@
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-@@ -6920,13 +6977,18 @@
+@@ -6923,13 +6980,18 @@
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
@@ -394,7 +349,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -6985,8 +7047,8 @@
+@@ -6988,8 +7050,8 @@
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_AC_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
@@ -405,7 +360,7 @@
# We can hardcode non-existant directories.
if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-@@ -7043,7 +7105,7 @@
+@@ -7046,7 +7108,7 @@
*)
AC_MSG_RESULT([no])
;;
@@ -414,7 +369,7 @@
fi
])# AC_LIBTOOL_SYS_LIB_STRIP
-@@ -7056,7 +7118,7 @@
+@@ -7059,7 +7121,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -423,7 +378,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -7066,7 +7128,20 @@
+@@ -7069,7 +7131,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -445,7 +400,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -7131,7 +7206,7 @@
+@@ -7134,7 +7209,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -454,7 +409,7 @@
;;
beos*)
-@@ -7140,7 +7215,7 @@
+@@ -7143,7 +7218,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -463,7 +418,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -7156,7 +7231,7 @@
+@@ -7159,7 +7234,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -472,7 +427,7 @@
need_version=no
need_lib_prefix=no
-@@ -7168,7 +7243,8 @@
+@@ -7171,7 +7246,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -482,7 +437,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -7198,7 +7274,7 @@
+@@ -7201,7 +7277,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -491,7 +446,7 @@
;;
esac
;;
-@@ -7221,7 +7297,7 @@
+@@ -7224,7 +7300,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -500,7 +455,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -7244,7 +7320,7 @@
+@@ -7247,7 +7323,7 @@
dynamic_linker=no
;;
@@ -509,7 +464,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -7256,8 +7332,17 @@
+@@ -7259,8 +7335,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -529,7 +484,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -7275,7 +7360,7 @@
+@@ -7278,7 +7363,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -538,7 +493,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -7302,9 +7387,9 @@
+@@ -7305,9 +7390,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -550,7 +505,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -7319,7 +7404,7 @@
+@@ -7322,7 +7407,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -559,7 +514,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -7330,7 +7415,7 @@
+@@ -7333,7 +7418,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -568,7 +523,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -7392,22 +7477,19 @@
+@@ -7395,22 +7480,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -597,7 +552,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -7417,6 +7499,30 @@
+@@ -7420,6 +7502,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -628,7 +583,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -7426,7 +7532,7 @@
+@@ -7429,7 +7535,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -637,7 +592,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -7455,7 +7561,11 @@
+@@ -7458,7 +7564,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -650,7 +605,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -7475,7 +7585,7 @@
+@@ -7478,7 +7588,7 @@
os2*)
libname_spec='$name'
@@ -659,7 +614,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -7621,7 +7731,9 @@
+@@ -7624,7 +7734,9 @@
case $tagname in
CXX)
@@ -670,7 +625,7 @@
AC_LIBTOOL_LANG_CXX_CONFIG
else
tagname=""
-@@ -7683,7 +7795,7 @@
+@@ -7686,7 +7798,7 @@
# AC_LIBTOOL_WIN32_DLL
# --------------------
@@ -679,7 +634,7 @@
AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
])# AC_LIBTOOL_WIN32_DLL
-@@ -7857,7 +7969,7 @@
+@@ -7860,7 +7972,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
@@ -688,7 +643,7 @@
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
-@@ -7967,7 +8079,7 @@
+@@ -7970,7 +8082,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
@@ -697,7 +652,7 @@
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
-@@ -7999,7 +8111,7 @@
+@@ -8002,7 +8114,7 @@
AC_DEFUN([AC_PROG_LD_GNU],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
@@ -706,7 +661,7 @@
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
-@@ -8026,6 +8138,15 @@
+@@ -8029,6 +8141,15 @@
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
@@ -722,7 +677,7 @@
])# AC_PROG_LD_RELOAD_FLAG
-@@ -8059,44 +8180,36 @@
+@@ -8062,44 +8183,36 @@
lt_cv_deplibs_check_method=pass_all
;;
@@ -778,7 +733,7 @@
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
-@@ -8112,7 +8225,7 @@
+@@ -8115,7 +8228,7 @@
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
@@ -787,7 +742,7 @@
ia64*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-@@ -8129,42 +8242,21 @@
+@@ -8132,42 +8245,21 @@
;;
irix5* | irix6* | nonstopux*)
@@ -837,7 +792,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
-@@ -8183,19 +8275,14 @@
+@@ -8186,19 +8278,14 @@
;;
openbsd*)
@@ -859,7 +814,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-@@ -8205,7 +8292,6 @@
+@@ -8208,7 +8295,6 @@
solaris*)
lt_cv_deplibs_check_method=pass_all
@@ -867,7 +822,7 @@
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-@@ -8313,13 +8399,13 @@
+@@ -8316,13 +8402,13 @@
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl convenience library and
# LTDLINCL to the include flags for the libltdl header and adds
@@ -888,7 +843,7 @@
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case $enable_ltdl_convenience in
-@@ -8338,13 +8424,13 @@
+@@ -8341,13 +8427,13 @@
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl installable library and
# LTDLINCL to the include flags for the libltdl header and adds
@@ -909,7 +864,7 @@
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-@@ -8382,10 +8468,21 @@
+@@ -8385,10 +8471,21 @@
# ---------------
AC_DEFUN([_LT_AC_LANG_CXX],
[AC_REQUIRE([AC_PROG_CXX])
@@ -932,7 +887,7 @@
# AC_LIBTOOL_F77
# --------------
-@@ -8458,6 +8555,10 @@
+@@ -8461,6 +8558,10 @@
_LT_AC_SYS_COMPILER
@@ -943,7 +898,7 @@
#
# Check for any special shared library compilation flags.
#
-@@ -8471,7 +8572,7 @@
+@@ -8474,7 +8575,7 @@
fi
if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
@@ -952,7 +907,7 @@
else
AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
_LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-@@ -8512,7 +8613,7 @@
+@@ -8515,7 +8616,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
@@ -961,7 +916,7 @@
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
-@@ -8521,48 +8622,11 @@
+@@ -8524,48 +8625,11 @@
fi
;;
@@ -1012,7 +967,7 @@
esac
AC_MSG_RESULT([$enable_shared])
-@@ -8587,7 +8651,7 @@
+@@ -8590,7 +8654,7 @@
AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
[AC_LANG_PUSH(C++)
AC_REQUIRE([AC_PROG_CXX])
@@ -1021,7 +976,7 @@
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-@@ -8616,7 +8680,7 @@
+@@ -8619,7 +8683,7 @@
_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
# Source file extension for C++ test sources.
@@ -1030,7 +985,7 @@
# Object file extension for compiled C++ test sources.
objext=o
-@@ -8631,6 +8695,10 @@
+@@ -8634,6 +8698,10 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -1041,7 +996,7 @@
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
-@@ -8652,7 +8720,7 @@
+@@ -8655,7 +8723,7 @@
CC=${CXX-"c++"}
compiler=$CC
_LT_AC_TAGVAR(compiler, $1)=$CC
@@ -1050,7 +1005,7 @@
# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
-@@ -8670,8 +8738,8 @@
+@@ -8673,8 +8741,8 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
@@ -1061,7 +1016,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-@@ -8697,7 +8765,7 @@
+@@ -8700,7 +8768,7 @@
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
@@ -1070,7 +1025,7 @@
fi
# Commands to make compiler produce verbose output that lists
-@@ -8727,8 +8795,22 @@
+@@ -8730,8 +8798,22 @@
exp_sym_flag='-Bexport'
no_entry_flag=""
else
@@ -1095,7 +1050,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -8745,7 +8827,7 @@
+@@ -8748,7 +8830,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
if test "$GXX" = yes; then
@@ -1104,7 +1059,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -8766,6 +8848,9 @@
+@@ -8769,6 +8851,9 @@
fi
esac
shared_flag='-shared'
@@ -1114,7 +1069,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -8774,15 +8859,16 @@
+@@ -8777,15 +8862,16 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -1135,7 +1090,7 @@
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
-@@ -8791,13 +8877,12 @@
+@@ -8794,13 +8880,12 @@
_LT_AC_SYS_LIBPATH_AIX
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -1151,7 +1106,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
_LT_AC_SYS_LIBPATH_AIX
-@@ -8811,8 +8896,8 @@
+@@ -8814,8 +8899,8 @@
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
@@ -1162,7 +1117,7 @@
fi
fi
;;
-@@ -8825,16 +8910,17 @@
+@@ -8828,16 +8913,17 @@
esac
;;
@@ -1182,7 +1137,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -8843,70 +8929,81 @@
+@@ -8846,70 +8932,81 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -1316,7 +1271,7 @@
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
-@@ -8917,14 +9014,14 @@
+@@ -8920,14 +9017,14 @@
;;
esac
;;
@@ -1333,7 +1288,7 @@
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-@@ -8941,12 +9038,12 @@
+@@ -8944,12 +9041,12 @@
# location of the library.
case $cc_basename in
@@ -1349,7 +1304,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
-@@ -8955,11 +9052,11 @@
+@@ -8958,11 +9055,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
@@ -1363,7 +1318,7 @@
else
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
-@@ -8969,7 +9066,7 @@
+@@ -8972,7 +9069,7 @@
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
@@ -1372,7 +1327,7 @@
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-@@ -8985,7 +9082,7 @@
+@@ -8988,7 +9085,7 @@
;;
esac
fi
@@ -1381,7 +1336,7 @@
hppa*64*)
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-@@ -9006,17 +9103,17 @@
+@@ -9009,17 +9106,17 @@
esac
case $cc_basename in
@@ -1403,7 +1358,7 @@
;;
esac
# Commands to make compiler produce verbose output that lists
-@@ -9032,12 +9129,12 @@
+@@ -9035,12 +9132,12 @@
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
@@ -1418,7 +1373,7 @@
;;
esac
fi
-@@ -9050,9 +9147,9 @@
+@@ -9053,9 +9150,9 @@
;;
irix5* | irix6*)
case $cc_basename in
@@ -1430,7 +1385,7 @@
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
-@@ -9063,9 +9160,9 @@
+@@ -9066,9 +9163,9 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
@@ -1442,7 +1397,7 @@
fi
fi
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-@@ -9076,14 +9173,14 @@
+@@ -9079,14 +9176,14 @@
;;
linux*)
case $cc_basename in
@@ -1460,7 +1415,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
-@@ -9101,20 +9198,44 @@
+@@ -9104,20 +9201,44 @@
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
@@ -1511,7 +1466,7 @@
runpath_var=LD_RUN_PATH
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-@@ -9142,7 +9263,7 @@
+@@ -9145,7 +9266,7 @@
;;
mvs*)
case $cc_basename in
@@ -1520,7 +1475,7 @@
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
-@@ -9152,7 +9273,7 @@
+@@ -9155,7 +9276,7 @@
;;
esac
;;
@@ -1529,7 +1484,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
-@@ -9163,15 +9284,31 @@
+@@ -9166,15 +9287,31 @@
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
@@ -1563,7 +1518,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9181,14 +9318,14 @@
+@@ -9184,14 +9321,14 @@
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
@@ -1581,7 +1536,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9206,7 +9343,7 @@
+@@ -9209,7 +9346,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
@@ -1590,7 +1545,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9225,13 +9362,13 @@
+@@ -9228,13 +9365,13 @@
;;
osf4* | osf5*)
case $cc_basename in
@@ -1606,7 +1561,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9240,17 +9377,17 @@
+@@ -9243,17 +9380,17 @@
# the KAI C++ compiler.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
;;
@@ -1628,7 +1583,7 @@
$rm $lib.exp'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-@@ -9269,7 +9406,7 @@
+@@ -9272,7 +9409,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
@@ -1637,7 +1592,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-@@ -9293,7 +9430,7 @@
+@@ -9296,7 +9433,7 @@
sco*)
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
case $cc_basename in
@@ -1646,7 +1601,7 @@
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
-@@ -9305,12 +9442,12 @@
+@@ -9308,12 +9445,12 @@
;;
sunos4*)
case $cc_basename in
@@ -1661,7 +1616,7 @@
# Lucid
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
-@@ -9323,36 +9460,33 @@
+@@ -9326,36 +9463,33 @@
;;
solaris*)
case $cc_basename in
@@ -1710,7 +1665,7 @@
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
-@@ -9360,9 +9494,9 @@
+@@ -9363,9 +9497,9 @@
# in the archive.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
@@ -1722,7 +1677,7 @@
# The C++ compiler must be used to create the archive.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-@@ -9372,9 +9506,9 @@
+@@ -9375,9 +9509,9 @@
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
if $CC --version | grep -v '^2\.7' > /dev/null; then
@@ -1734,7 +1689,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
-@@ -9383,9 +9517,9 @@
+@@ -9386,9 +9520,9 @@
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
@@ -1746,7 +1701,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
-@@ -9403,7 +9537,7 @@
+@@ -9406,7 +9540,7 @@
;;
tandem*)
case $cc_basename in
@@ -1755,7 +1710,7 @@
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
-@@ -9513,7 +9647,7 @@
+@@ -9516,7 +9650,7 @@
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
@@ -1764,7 +1719,7 @@
for p in `eval $output_verbose_link_cmd`; do
case $p in
-@@ -9553,7 +9687,7 @@
+@@ -9556,7 +9690,7 @@
fi
;;
@@ -1773,7 +1728,7 @@
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
-@@ -9589,6 +9723,21 @@
+@@ -9592,6 +9726,21 @@
$rm -f confest.$objext
@@ -1795,7 +1750,7 @@
case " $_LT_AC_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
-@@ -9639,12 +9788,16 @@
+@@ -9642,12 +9791,16 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -1813,7 +1768,7 @@
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
-@@ -9654,7 +9807,7 @@
+@@ -9657,7 +9810,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
@@ -1822,7 +1777,7 @@
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
-@@ -9662,8 +9815,10 @@
+@@ -9665,8 +9818,10 @@
postinstall_cmds='$RANLIB $lib'
fi
;;
@@ -1835,7 +1790,7 @@
;;
esac
AC_MSG_RESULT([$enable_shared])
-@@ -9714,20 +9869,27 @@
+@@ -9717,20 +9872,27 @@
lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
@@ -1864,7 +1819,7 @@
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
-@@ -9774,11 +9936,16 @@
+@@ -9777,11 +9939,16 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
@@ -1881,7 +1836,7 @@
_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
AC_LIBTOOL_CONFIG($1)
-@@ -9804,11 +9971,12 @@
+@@ -9807,11 +9974,12 @@
# without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
@@ -1896,7 +1851,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -9858,7 +10026,7 @@
+@@ -9861,7 +10029,7 @@
_LT_AC_TAGVAR(archive_cmds, $1) | \
_LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
_LT_AC_TAGVAR(module_cmds, $1) | \
@@ -1905,7 +1860,7 @@
_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
_LT_AC_TAGVAR(export_symbols_cmds, $1) | \
extract_expsyms_cmds | reload_cmds | finish_cmds | \
-@@ -9924,11 +10092,11 @@
+@@ -9927,11 +10095,11 @@
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
@@ -1919,7 +1874,7 @@
# The names of the tagged configurations supported by this script.
available_tags=
-@@ -9959,6 +10127,12 @@
+@@ -9962,6 +10130,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -1932,7 +1887,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -9989,7 +10163,7 @@
+@@ -9992,7 +10166,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -1941,7 +1896,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -10020,7 +10194,7 @@
+@@ -10023,7 +10197,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -1950,7 +1905,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -10035,7 +10209,7 @@
+@@ -10038,7 +10212,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
@@ -1959,7 +1914,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -10264,7 +10438,10 @@
+@@ -10267,7 +10441,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -1971,7 +1926,7 @@
fi
])# AC_LIBTOOL_CONFIG
-@@ -10306,9 +10483,6 @@
+@@ -10309,9 +10486,6 @@
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
@@ -1981,7 +1936,7 @@
# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-@@ -10330,6 +10504,13 @@
+@@ -10333,6 +10507,13 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
@@ -1995,7 +1950,7 @@
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
-@@ -10337,7 +10518,7 @@
+@@ -10340,7 +10521,7 @@
symcode='[[BCDEGQRST]]'
;;
solaris* | sysv5*)
@@ -2004,7 +1959,7 @@
;;
sysv4)
symcode='[[DFNSTU]]'
-@@ -10355,14 +10536,17 @@
+@@ -10358,14 +10539,17 @@
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
@@ -2024,7 +1979,7 @@
# Check to see that the pipe works correctly.
pipe_works=no
-@@ -10526,7 +10710,7 @@
+@@ -10529,7 +10713,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -2033,7 +1988,7 @@
hppa*64*|ia64*)
;;
*)
-@@ -10551,18 +10735,28 @@
+@@ -10554,18 +10738,28 @@
;;
chorus*)
case $cc_basename in
@@ -2065,7 +2020,7 @@
# Green Hills C++ Compiler
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
-@@ -10570,22 +10764,22 @@
+@@ -10573,22 +10767,22 @@
;;
esac
;;
@@ -2092,7 +2047,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -10600,7 +10794,7 @@
+@@ -10603,7 +10797,7 @@
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
@@ -2101,7 +2056,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
-@@ -10611,18 +10805,24 @@
+@@ -10614,18 +10808,24 @@
;;
linux*)
case $cc_basename in
@@ -2130,7 +2085,7 @@
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
-@@ -10639,25 +10839,25 @@
+@@ -10642,25 +10842,25 @@
;;
mvs*)
case $cc_basename in
@@ -2161,7 +2116,7 @@
# Digital/Compaq C++
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
-@@ -10673,7 +10873,7 @@
+@@ -10676,7 +10876,7 @@
;;
sco*)
case $cc_basename in
@@ -2170,7 +2125,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
*)
-@@ -10682,13 +10882,13 @@
+@@ -10685,13 +10885,13 @@
;;
solaris*)
case $cc_basename in
@@ -2186,7 +2141,7 @@
# Green Hills C++ Compiler
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
;;
-@@ -10698,12 +10898,12 @@
+@@ -10701,12 +10901,12 @@
;;
sunos4*)
case $cc_basename in
@@ -2201,7 +2156,7 @@
# Lucid
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
-@@ -10713,7 +10913,7 @@
+@@ -10716,7 +10916,7 @@
;;
tandem*)
case $cc_basename in
@@ -2210,7 +2165,7 @@
# NonStop-UX NCC 3.20
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
-@@ -10784,7 +10984,7 @@
+@@ -10787,7 +10987,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -2219,7 +2174,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -10810,6 +11010,16 @@
+@@ -10813,6 +11013,16 @@
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
@@ -2236,7 +2191,7 @@
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
-@@ -10821,7 +11031,7 @@
+@@ -10824,7 +11034,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -2245,7 +2200,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -10845,12 +11055,19 @@
+@@ -10848,12 +11058,19 @@
;;
linux*)
@@ -2266,7 +2221,7 @@
ccc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All Alpha code is PIC.
-@@ -10871,9 +11088,14 @@
+@@ -10874,9 +11091,14 @@
;;
solaris*)
@@ -2282,7 +2237,7 @@
;;
sunos4*)
-@@ -10895,6 +11117,11 @@
+@@ -10898,6 +11120,11 @@
fi
;;
@@ -2294,7 +2249,7 @@
uts4*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-@@ -10922,7 +11149,7 @@
+@@ -10925,7 +11152,7 @@
[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
@@ -2303,7 +2258,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-@@ -10955,7 +11182,10 @@
+@@ -10958,7 +11185,10 @@
_LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
;;
cygwin* | mingw*)
@@ -2315,7 +2270,7 @@
;;
*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-@@ -10981,7 +11211,7 @@
+@@ -10984,7 +11214,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
_LT_AC_TAGVAR(hardcode_automatic, $1)=no
_LT_AC_TAGVAR(module_cmds, $1)=
@@ -2324,7 +2279,7 @@
_LT_AC_TAGVAR(always_export_symbols, $1)=no
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
-@@ -10998,7 +11228,8 @@
+@@ -11001,7 +11231,8 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
@@ -2334,7 +2289,7 @@
case $host_os in
cygwin* | mingw* | pw32*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
-@@ -11018,6 +11249,27 @@
+@@ -11021,6 +11252,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -2362,7 +2317,7 @@
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
-@@ -11055,7 +11307,7 @@
+@@ -11058,7 +11310,7 @@
_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -2371,7 +2326,7 @@
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
-@@ -11065,13 +11317,13 @@
+@@ -11068,13 +11320,13 @@
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
@@ -2388,7 +2343,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -11080,19 +11332,51 @@
+@@ -11083,19 +11335,51 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -2445,7 +2400,7 @@
fi
;;
-@@ -11110,8 +11394,8 @@
+@@ -11113,8 +11397,8 @@
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -2456,7 +2411,7 @@
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
-@@ -11126,24 +11410,19 @@
+@@ -11129,24 +11413,19 @@
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -2488,7 +2443,7 @@
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
-@@ -11177,9 +11456,20 @@
+@@ -11180,9 +11459,20 @@
else
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
fi
@@ -2511,7 +2466,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -11196,7 +11486,7 @@
+@@ -11199,7 +11489,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
if test "$GCC" = yes; then
@@ -2520,7 +2475,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -11217,6 +11507,9 @@
+@@ -11220,6 +11510,9 @@
fi
esac
shared_flag='-shared'
@@ -2530,7 +2485,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -11225,29 +11518,29 @@
+@@ -11228,29 +11521,29 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -2569,7 +2524,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
_LT_AC_SYS_LIBPATH_AIX
-@@ -11261,8 +11554,8 @@
+@@ -11264,8 +11557,8 @@
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
@@ -2580,7 +2535,7 @@
fi
fi
;;
-@@ -11275,7 +11568,7 @@
+@@ -11278,7 +11571,7 @@
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
@@ -2589,7 +2544,7 @@
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
-@@ -11285,69 +11578,69 @@
+@@ -11288,69 +11581,69 @@
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
@@ -2705,7 +2660,7 @@
;;
dgux*)
-@@ -11380,8 +11673,8 @@
+@@ -11383,8 +11676,8 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
@@ -2716,7 +2671,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-@@ -11389,7 +11682,7 @@
+@@ -11392,7 +11685,7 @@
hpux9*)
if test "$GCC" = yes; then
@@ -2725,7 +2680,7 @@
else
_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -11405,16 +11698,16 @@
+@@ -11408,16 +11701,16 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
@@ -2746,7 +2701,7 @@
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
-@@ -11424,7 +11717,7 @@
+@@ -11427,7 +11720,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
@@ -2755,7 +2710,7 @@
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-@@ -11457,7 +11750,7 @@
+@@ -11460,7 +11753,7 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -2764,7 +2719,7 @@
else
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-@@ -11467,7 +11760,7 @@
+@@ -11470,7 +11763,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
@@ -2773,7 +2728,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -11490,7 +11783,8 @@
+@@ -11493,7 +11786,8 @@
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
@@ -2783,7 +2738,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
else
-@@ -11500,7 +11794,7 @@
+@@ -11503,7 +11797,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
;;
*)
@@ -2792,7 +2747,7 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
;;
esac
-@@ -11511,14 +11805,14 @@
+@@ -11514,14 +11808,14 @@
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
@@ -2809,7 +2764,7 @@
else
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-@@ -11530,13 +11824,13 @@
+@@ -11533,13 +11827,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
@@ -2825,7 +2780,7 @@
# Both c and cxx compiler support -rpath directly
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-@@ -11555,10 +11849,12 @@
+@@ -11558,10 +11852,12 @@
solaris*)
_LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
if test "$GCC" = yes; then
@@ -2840,7 +2795,7 @@
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-@@ -11567,8 +11863,18 @@
+@@ -11570,8 +11866,18 @@
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
@@ -2861,7 +2816,7 @@
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
-@@ -11577,7 +11883,7 @@
+@@ -11580,7 +11886,7 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
@@ -2870,7 +2825,7 @@
else
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -11637,9 +11943,9 @@
+@@ -11640,9 +11946,9 @@
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
_LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
if test "$GCC" = yes; then
@@ -2882,7 +2837,7 @@
fi
runpath_var='LD_RUN_PATH'
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-@@ -11697,7 +12003,7 @@
+@@ -11700,7 +12006,7 @@
AC_MSG_CHECKING([whether -lc should be explicitly linked in])
$rm conftest*
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -2891,7 +2846,7 @@
if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
soname=conftest
lib=conftest
-@@ -11831,7 +12137,7 @@
+@@ -11834,7 +12140,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
@@ -2971,7 +2926,7 @@
unset CDPATH
-@@ -7164,7 +7191,7 @@
+@@ -7167,7 +7194,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
@@ -2980,7 +2935,7 @@
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-@@ -7269,7 +7296,7 @@
+@@ -7272,7 +7299,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
@@ -2989,7 +2944,7 @@
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
-@@ -7303,7 +7330,7 @@
+@@ -7306,7 +7333,7 @@
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2998,7 +2953,7 @@
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
-@@ -7333,6 +7360,15 @@
+@@ -7336,6 +7363,15 @@
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
@@ -3014,7 +2969,7 @@
echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
-@@ -7419,44 +7455,36 @@
+@@ -7422,44 +7458,36 @@
lt_cv_deplibs_check_method=pass_all
;;
@@ -3069,7 +3024,7 @@
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
-@@ -7472,7 +7500,7 @@
+@@ -7475,7 +7503,7 @@
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
@@ -3078,7 +3033,7 @@
ia64*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-@@ -7489,42 +7517,21 @@
+@@ -7492,42 +7520,21 @@
;;
irix5* | irix6* | nonstopux*)
@@ -3128,7 +3083,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
-@@ -7543,19 +7550,14 @@
+@@ -7546,19 +7553,14 @@
;;
openbsd*)
@@ -3150,7 +3105,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-@@ -7565,7 +7567,6 @@
+@@ -7568,7 +7570,6 @@
solaris*)
lt_cv_deplibs_check_method=pass_all
@@ -3158,16 +3113,16 @@
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-@@ -7642,7 +7643,7 @@
+@@ -7645,7 +7646,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
-- echo '#line 7645 "configure"' > conftest.$ac_ext
-+ echo '#line 7646 "configure"' > conftest.$ac_ext
+- echo '#line 7648 "configure"' > conftest.$ac_ext
++ echo '#line 7649 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
-@@ -7685,14 +7686,13 @@
+@@ -7688,14 +7689,13 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
@@ -3184,7 +3139,7 @@
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
-@@ -7704,7 +7704,6 @@
+@@ -7707,7 +7707,6 @@
esac
;;
*64-bit*)
@@ -3192,7 +3147,7 @@
case $host in
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
-@@ -8191,6 +8190,243 @@
+@@ -8194,6 +8193,243 @@
done
@@ -3436,16 +3391,16 @@
ac_ext=f
ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-@@ -8283,7 +8519,7 @@
+@@ -8286,7 +8522,7 @@
# Provide some information about the compiler.
--echo "$as_me:8286:" \
-+echo "$as_me:8522:" \
+-echo "$as_me:8289:" \
++echo "$as_me:8525:" \
"checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-@@ -8436,7 +8672,7 @@
+@@ -8439,7 +8675,7 @@
echo $ECHO_N "(cached) $ECHO_C" >&6
else
i=0
@@ -3454,7 +3409,7 @@
case $build_os in
msdosdjgpp*)
-@@ -8465,20 +8701,53 @@
+@@ -8468,20 +8704,53 @@
lt_cv_sys_max_cmd_len=8192;
;;
@@ -3514,7 +3469,7 @@
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
-@@ -8515,9 +8784,6 @@
+@@ -8518,9 +8787,6 @@
# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
@@ -3524,7 +3479,7 @@
# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-@@ -8539,6 +8805,13 @@
+@@ -8542,6 +8808,13 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
@@ -3538,7 +3493,7 @@
irix* | nonstopux*)
symcode='[BCDEGRST]'
;;
-@@ -8546,7 +8819,7 @@
+@@ -8549,7 +8822,7 @@
symcode='[BCDEGQRST]'
;;
solaris* | sysv5*)
@@ -3547,7 +3502,7 @@
;;
sysv4)
symcode='[DFNSTU]'
-@@ -8564,14 +8837,17 @@
+@@ -8567,14 +8840,17 @@
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
@@ -3567,7 +3522,7 @@
# Check to see that the pipe works correctly.
pipe_works=no
-@@ -8733,7 +9009,7 @@
+@@ -8736,7 +9012,7 @@
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
@@ -3576,7 +3531,7 @@
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
-@@ -8753,7 +9029,7 @@
+@@ -8756,7 +9032,7 @@
default_ofile=libtool
can_build_shared=yes
@@ -3585,7 +3540,7 @@
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
-@@ -9038,6 +9314,17 @@
+@@ -9041,6 +9317,17 @@
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
@@ -3603,7 +3558,7 @@
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
-@@ -9063,7 +9350,7 @@
+@@ -9066,7 +9353,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
@@ -3612,7 +3567,7 @@
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
-@@ -9125,7 +9412,7 @@
+@@ -9128,7 +9415,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
@@ -3621,7 +3576,7 @@
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
-@@ -9224,6 +9511,20 @@
+@@ -9227,6 +9514,20 @@
compiler=$CC
@@ -3642,7 +3597,7 @@
#
# Check for any special shared library compilation flags.
#
-@@ -9260,11 +9561,16 @@
+@@ -9263,11 +9564,16 @@
LDFLAGS="$LDFLAGS $lt_prog_compiler_static"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -3660,7 +3615,7 @@
else
lt_prog_compiler_static_works=yes
fi
-@@ -9310,18 +9616,20 @@
+@@ -9313,18 +9619,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -3668,13 +3623,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:9316: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9622: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:9319: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9625: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:9320: \$? = $ac_status" >&5
-+ echo "$as_me:9626: \$? = $ac_status" >&5
+- echo "$as_me:9323: \$? = $ac_status" >&5
++ echo "$as_me:9629: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -3686,7 +3641,7 @@
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
-@@ -9398,7 +9706,7 @@
+@@ -9401,7 +9709,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -3695,7 +3650,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -9424,6 +9732,16 @@
+@@ -9427,6 +9735,16 @@
lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
@@ -3712,7 +3667,7 @@
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
-@@ -9435,7 +9753,7 @@
+@@ -9438,7 +9756,7 @@
lt_prog_compiler_wl='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -3721,7 +3676,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -9459,12 +9777,19 @@
+@@ -9462,12 +9780,19 @@
;;
linux*)
@@ -3742,7 +3697,7 @@
ccc*)
lt_prog_compiler_wl='-Wl,'
# All Alpha code is PIC.
-@@ -9485,9 +9810,14 @@
+@@ -9488,9 +9813,14 @@
;;
solaris*)
@@ -3758,7 +3713,7 @@
;;
sunos4*)
-@@ -9509,6 +9839,11 @@
+@@ -9512,6 +9842,11 @@
fi
;;
@@ -3770,7 +3725,7 @@
uts4*)
lt_prog_compiler_pic='-pic'
lt_prog_compiler_static='-Bstatic'
-@@ -9543,18 +9878,20 @@
+@@ -9546,18 +9881,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -3778,13 +3733,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:9549: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9884: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:9552: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9887: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:9553: \$? = $ac_status" >&5
-+ echo "$as_me:9888: \$? = $ac_status" >&5
+- echo "$as_me:9556: \$? = $ac_status" >&5
++ echo "$as_me:9891: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -3796,7 +3751,7 @@
lt_prog_compiler_pic_works=yes
fi
fi
-@@ -9575,7 +9912,7 @@
+@@ -9578,7 +9915,7 @@
fi
fi
@@ -3805,7 +3760,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
-@@ -9597,38 +9934,36 @@
+@@ -9600,38 +9937,36 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -3826,13 +3781,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:9616: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9946: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:9619: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9949: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:9620: \$? = $ac_status" >&5
-+ echo "$as_me:9950: \$? = $ac_status" >&5
+- echo "$as_me:9623: \$? = $ac_status" >&5
++ echo "$as_me:9953: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -3856,7 +3811,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -9699,6 +10034,16 @@
+@@ -9702,6 +10037,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
@@ -3873,7 +3828,7 @@
case $host_os in
cygwin* | mingw* | pw32*)
-@@ -9719,6 +10064,27 @@
+@@ -9722,6 +10067,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -3901,7 +3856,7 @@
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
-@@ -9756,7 +10122,7 @@
+@@ -9759,7 +10125,7 @@
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -3910,7 +3865,7 @@
else
ld_shlibs=no
fi
-@@ -9766,13 +10132,13 @@
+@@ -9769,13 +10135,13 @@
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
@@ -3927,7 +3882,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -9781,19 +10147,51 @@
+@@ -9784,19 +10150,51 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -3983,7 +3938,7 @@
fi
;;
-@@ -9811,8 +10209,8 @@
+@@ -9814,8 +10212,8 @@
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -3994,7 +3949,7 @@
else
ld_shlibs=no
fi
-@@ -9827,24 +10225,19 @@
+@@ -9830,24 +10228,19 @@
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -4026,7 +3981,7 @@
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
-@@ -9878,9 +10271,20 @@
+@@ -9881,9 +10274,20 @@
else
export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
@@ -4049,7 +4004,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -9897,7 +10301,7 @@
+@@ -9900,7 +10304,7 @@
link_all_deplibs=yes
if test "$GCC" = yes; then
@@ -4058,7 +4013,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -9918,6 +10322,9 @@
+@@ -9921,6 +10325,9 @@
fi
esac
shared_flag='-shared'
@@ -4068,7 +4023,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -9926,21 +10333,22 @@
+@@ -9929,21 +10336,22 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -4096,7 +4051,7 @@
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
-@@ -9991,14 +10399,13 @@
+@@ -9994,14 +10402,13 @@
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
@@ -4114,7 +4069,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
-@@ -10062,8 +10469,8 @@
+@@ -10065,8 +10472,8 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec=' '
archive_cmds_need_lc=yes
@@ -4125,7 +4080,7 @@
fi
fi
;;
-@@ -10076,7 +10483,7 @@
+@@ -10079,7 +10486,7 @@
ld_shlibs=no
;;
@@ -4134,7 +4089,7 @@
export_dynamic_flag_spec=-rdynamic
;;
-@@ -10086,13 +10493,13 @@
+@@ -10089,13 +10496,13 @@
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec=' '
@@ -4151,7 +4106,7 @@
# The linker will automatically build a .lib file if we build a DLL.
old_archive_From_new_cmds='true'
# FIXME: Should let the user specify the lib program.
-@@ -10102,52 +10509,52 @@
+@@ -10105,52 +10512,52 @@
;;
darwin* | rhapsody*)
@@ -4244,7 +4199,7 @@
fi
;;
-@@ -10181,8 +10588,8 @@
+@@ -10184,8 +10591,8 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
@@ -4255,7 +4210,7 @@
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
-@@ -10190,7 +10597,7 @@
+@@ -10193,7 +10600,7 @@
hpux9*)
if test "$GCC" = yes; then
@@ -4264,7 +4219,7 @@
else
archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -10206,16 +10613,16 @@
+@@ -10209,16 +10616,16 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
@@ -4285,7 +4240,7 @@
hppa*64*|ia64*)
archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
-@@ -10225,7 +10632,7 @@
+@@ -10228,7 +10635,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
@@ -4294,7 +4249,7 @@
hppa*64*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld='+b $libdir'
-@@ -10258,7 +10665,7 @@
+@@ -10261,7 +10668,7 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -4303,7 +4258,7 @@
else
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld='-rpath $libdir'
-@@ -10268,7 +10675,7 @@
+@@ -10271,7 +10678,7 @@
link_all_deplibs=yes
;;
@@ -4312,7 +4267,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -10291,7 +10698,8 @@
+@@ -10294,7 +10701,8 @@
hardcode_direct=yes
hardcode_shlibpath_var=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
@@ -4322,7 +4277,7 @@
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
export_dynamic_flag_spec='${wl}-E'
else
-@@ -10301,7 +10709,7 @@
+@@ -10304,7 +10712,7 @@
hardcode_libdir_flag_spec='-R$libdir'
;;
*)
@@ -4331,7 +4286,7 @@
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
esac
-@@ -10312,14 +10720,14 @@
+@@ -10315,14 +10723,14 @@
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
@@ -4348,7 +4303,7 @@
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-@@ -10331,13 +10739,13 @@
+@@ -10334,13 +10742,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
@@ -4364,7 +4319,7 @@
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
-@@ -10356,10 +10764,12 @@
+@@ -10359,10 +10767,12 @@
solaris*)
no_undefined_flag=' -z text'
if test "$GCC" = yes; then
@@ -4379,7 +4334,7 @@
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-@@ -10368,8 +10778,18 @@
+@@ -10371,8 +10781,18 @@
hardcode_shlibpath_var=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
@@ -4400,7 +4355,7 @@
esac
link_all_deplibs=yes
;;
-@@ -10378,7 +10798,7 @@
+@@ -10381,7 +10801,7 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
@@ -4409,7 +4364,7 @@
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -10438,9 +10858,9 @@
+@@ -10441,9 +10861,9 @@
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag='${wl}-z ${wl}text'
if test "$GCC" = yes; then
@@ -4421,7 +4376,7 @@
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
-@@ -10546,7 +10966,7 @@
+@@ -10549,7 +10969,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -4430,7 +4385,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -10556,7 +10976,20 @@
+@@ -10559,7 +10979,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -4452,7 +4407,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -10621,7 +11054,7 @@
+@@ -10624,7 +11057,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -4461,7 +4416,7 @@
;;
beos*)
-@@ -10630,7 +11063,7 @@
+@@ -10633,7 +11066,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -4470,7 +4425,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -10646,7 +11079,7 @@
+@@ -10649,7 +11082,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -4479,7 +4434,7 @@
need_version=no
need_lib_prefix=no
-@@ -10658,7 +11091,8 @@
+@@ -10661,7 +11094,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -4489,7 +4444,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -10688,7 +11122,7 @@
+@@ -10691,7 +11125,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -4498,7 +4453,7 @@
;;
esac
;;
-@@ -10711,7 +11145,7 @@
+@@ -10714,7 +11148,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -4507,7 +4462,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -10734,7 +11168,7 @@
+@@ -10737,7 +11171,7 @@
dynamic_linker=no
;;
@@ -4516,7 +4471,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -10746,8 +11180,17 @@
+@@ -10749,8 +11183,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -4536,7 +4491,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -10765,7 +11208,7 @@
+@@ -10768,7 +11211,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -4545,7 +4500,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -10792,9 +11235,9 @@
+@@ -10795,9 +11238,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -4557,7 +4512,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -10809,7 +11252,7 @@
+@@ -10812,7 +11255,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -4566,7 +4521,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -10820,7 +11263,7 @@
+@@ -10823,7 +11266,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -4575,7 +4530,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -10882,22 +11325,19 @@
+@@ -10885,22 +11328,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -4604,7 +4559,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -10907,6 +11347,30 @@
+@@ -10910,6 +11350,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -4635,7 +4590,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -10916,7 +11380,7 @@
+@@ -10919,7 +11383,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -4644,7 +4599,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -10945,7 +11409,11 @@
+@@ -10948,7 +11412,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -4657,7 +4612,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -10965,7 +11433,7 @@
+@@ -10968,7 +11436,7 @@
os2*)
libname_spec='$name'
@@ -4666,7 +4621,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -11067,8 +11535,8 @@
+@@ -11070,8 +11538,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
@@ -4677,16 +4632,16 @@
# We can hardcode non-existant directories.
if test "$hardcode_direct" != no &&
-@@ -11727,7 +12195,7 @@
+@@ -11730,7 +12198,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 11730 "configure"
-+#line 12198 "configure"
+-#line 11733 "configure"
++#line 12201 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -11793,7 +12261,7 @@
+@@ -11796,7 +12264,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -4695,16 +4650,16 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-@@ -11825,7 +12293,7 @@
+@@ -11828,7 +12296,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 11828 "configure"
-+#line 12296 "configure"
+-#line 11831 "configure"
++#line 12299 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -11891,7 +12359,7 @@
+@@ -11894,7 +12362,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -4713,7 +4668,7 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-@@ -11941,7 +12409,7 @@
+@@ -11944,7 +12412,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
@@ -4722,7 +4677,7 @@
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
-@@ -11950,47 +12418,10 @@
+@@ -11953,47 +12421,10 @@
fi
;;
@@ -4771,7 +4726,7 @@
;;
esac
echo "$as_me:$LINENO: result: $enable_shared" >&5
-@@ -12016,7 +12447,8 @@
+@@ -12019,7 +12450,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -4781,7 +4736,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -12130,11 +12562,11 @@
+@@ -12133,11 +12565,11 @@
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
@@ -4795,7 +4750,7 @@
# The names of the tagged configurations supported by this script.
available_tags=
-@@ -12164,6 +12596,12 @@
+@@ -12167,6 +12599,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -4808,7 +4763,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -12194,7 +12632,7 @@
+@@ -12197,7 +12635,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -4817,7 +4772,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -12225,7 +12663,7 @@
+@@ -12228,7 +12666,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -4826,7 +4781,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -12240,7 +12678,7 @@
+@@ -12243,7 +12681,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o
@@ -4835,7 +4790,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -12467,7 +12905,10 @@
+@@ -12470,7 +12908,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -4847,7 +4802,7 @@
fi
-@@ -12532,7 +12973,9 @@
+@@ -12535,7 +12976,9 @@
case $tagname in
CXX)
@@ -4858,7 +4813,7 @@
ac_ext=cc
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-@@ -12569,7 +13012,7 @@
+@@ -12572,7 +13015,7 @@
compiler_lib_search_path_CXX=
# Source file extension for C++ test sources.
@@ -4867,7 +4822,7 @@
# Object file extension for compiled C++ test sources.
objext=o
-@@ -12590,6 +13033,20 @@
+@@ -12593,6 +13036,20 @@
compiler=$CC
@@ -4888,7 +4843,7 @@
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
-@@ -12611,7 +13068,16 @@
+@@ -12614,7 +13071,16 @@
CC=${CXX-"c++"}
compiler=$CC
compiler_CXX=$CC
@@ -4906,7 +4861,7 @@
# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
-@@ -12682,7 +13148,7 @@
+@@ -12685,7 +13151,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
@@ -4915,7 +4870,7 @@
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
-@@ -12716,7 +13182,7 @@
+@@ -12719,7 +13185,7 @@
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4924,7 +4879,7 @@
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
-@@ -12735,8 +13201,8 @@
+@@ -12738,8 +13204,8 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
@@ -4935,7 +4890,7 @@
hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-@@ -12762,7 +13228,7 @@
+@@ -12765,7 +13231,7 @@
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
@@ -4944,7 +4899,7 @@
fi
# Commands to make compiler produce verbose output that lists
-@@ -12793,8 +13259,22 @@
+@@ -12796,8 +13262,22 @@
exp_sym_flag='-Bexport'
no_entry_flag=""
else
@@ -4969,7 +4924,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -12811,7 +13291,7 @@
+@@ -12814,7 +13294,7 @@
link_all_deplibs_CXX=yes
if test "$GXX" = yes; then
@@ -4978,7 +4933,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -12832,6 +13312,9 @@
+@@ -12835,6 +13315,9 @@
fi
esac
shared_flag='-shared'
@@ -4988,7 +4943,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -12840,15 +13323,16 @@
+@@ -12843,15 +13326,16 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -5009,7 +4964,7 @@
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
-@@ -12907,13 +13391,12 @@
+@@ -12910,13 +13394,12 @@
hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
@@ -5025,7 +4980,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
-@@ -12977,8 +13460,8 @@
+@@ -12980,8 +13463,8 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_CXX=' '
archive_cmds_need_lc_CXX=yes
@@ -5036,7 +4991,7 @@
fi
fi
;;
-@@ -12991,16 +13474,17 @@
+@@ -12994,16 +13477,17 @@
esac
;;
@@ -5056,7 +5011,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -13009,70 +13493,81 @@
+@@ -13012,70 +13496,81 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -5190,7 +5145,7 @@
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
-@@ -13083,14 +13578,14 @@
+@@ -13086,14 +13581,14 @@
;;
esac
;;
@@ -5207,7 +5162,7 @@
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
ld_shlibs_CXX=yes
-@@ -13107,12 +13602,12 @@
+@@ -13110,12 +13605,12 @@
# location of the library.
case $cc_basename in
@@ -5223,7 +5178,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
-@@ -13121,11 +13616,11 @@
+@@ -13124,11 +13619,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
@@ -5237,7 +5192,7 @@
else
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
-@@ -13135,7 +13630,7 @@
+@@ -13138,7 +13633,7 @@
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
@@ -5246,7 +5201,7 @@
hppa*64*)
hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
-@@ -13151,7 +13646,7 @@
+@@ -13154,7 +13649,7 @@
;;
esac
fi
@@ -5255,7 +5210,7 @@
hppa*64*)
hardcode_direct_CXX=no
hardcode_shlibpath_var_CXX=no
-@@ -13172,17 +13667,17 @@
+@@ -13175,17 +13670,17 @@
esac
case $cc_basename in
@@ -5277,7 +5232,7 @@
;;
esac
# Commands to make compiler produce verbose output that lists
-@@ -13198,12 +13693,12 @@
+@@ -13201,12 +13696,12 @@
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
@@ -5292,7 +5247,7 @@
;;
esac
fi
-@@ -13216,9 +13711,9 @@
+@@ -13219,9 +13714,9 @@
;;
irix5* | irix6*)
case $cc_basename in
@@ -5304,7 +5259,7 @@
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
-@@ -13229,9 +13724,9 @@
+@@ -13232,9 +13727,9 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
@@ -5316,7 +5271,7 @@
fi
fi
link_all_deplibs_CXX=yes
-@@ -13242,14 +13737,14 @@
+@@ -13245,14 +13740,14 @@
;;
linux*)
case $cc_basename in
@@ -5334,7 +5289,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
-@@ -13267,20 +13762,44 @@
+@@ -13270,20 +13765,44 @@
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
;;
@@ -5385,7 +5340,7 @@
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-@@ -13308,7 +13827,7 @@
+@@ -13311,7 +13830,7 @@
;;
mvs*)
case $cc_basename in
@@ -5394,7 +5349,7 @@
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
-@@ -13318,7 +13837,7 @@
+@@ -13321,7 +13840,7 @@
;;
esac
;;
@@ -5403,7 +5358,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
-@@ -13329,15 +13848,31 @@
+@@ -13332,15 +13851,31 @@
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
@@ -5437,7 +5392,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13347,14 +13882,14 @@
+@@ -13350,14 +13885,14 @@
old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
;;
@@ -5455,7 +5410,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13372,7 +13907,7 @@
+@@ -13375,7 +13910,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
@@ -5464,7 +5419,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13391,13 +13926,13 @@
+@@ -13394,13 +13929,13 @@
;;
osf4* | osf5*)
case $cc_basename in
@@ -5480,7 +5435,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13406,17 +13941,17 @@
+@@ -13409,17 +13944,17 @@
# the KAI C++ compiler.
old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
;;
@@ -5502,7 +5457,7 @@
$rm $lib.exp'
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-@@ -13435,7 +13970,7 @@
+@@ -13438,7 +13973,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
@@ -5511,7 +5466,7 @@
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
-@@ -13459,7 +13994,7 @@
+@@ -13462,7 +13997,7 @@
sco*)
archive_cmds_need_lc_CXX=no
case $cc_basename in
@@ -5520,7 +5475,7 @@
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
-@@ -13471,12 +14006,12 @@
+@@ -13474,12 +14009,12 @@
;;
sunos4*)
case $cc_basename in
@@ -5535,7 +5490,7 @@
# Lucid
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
-@@ -13489,36 +14024,33 @@
+@@ -13492,36 +14027,33 @@
;;
solaris*)
case $cc_basename in
@@ -5584,7 +5539,7 @@
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
-@@ -13526,9 +14058,9 @@
+@@ -13529,9 +14061,9 @@
# in the archive.
old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
;;
@@ -5596,7 +5551,7 @@
# The C++ compiler must be used to create the archive.
old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-@@ -13538,9 +14070,9 @@
+@@ -13541,9 +14073,9 @@
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
if $CC --version | grep -v '^2\.7' > /dev/null; then
@@ -5608,7 +5563,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
-@@ -13549,9 +14081,9 @@
+@@ -13552,9 +14084,9 @@
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
@@ -5620,7 +5575,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
-@@ -13569,7 +14101,7 @@
+@@ -13572,7 +14104,7 @@
;;
tandem*)
case $cc_basename in
@@ -5629,7 +5584,7 @@
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
-@@ -13626,7 +14158,7 @@
+@@ -13629,7 +14161,7 @@
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
@@ -5638,7 +5593,7 @@
for p in `eval $output_verbose_link_cmd`; do
case $p in
-@@ -13666,7 +14198,7 @@
+@@ -13669,7 +14201,7 @@
fi
;;
@@ -5647,7 +5602,7 @@
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
-@@ -13702,6 +14234,20 @@
+@@ -13705,6 +14237,20 @@
$rm -f confest.$objext
@@ -5668,7 +5623,7 @@
case " $postdeps_CXX " in
*" -lc "*) archive_cmds_need_lc_CXX=no ;;
esac
-@@ -13757,7 +14303,7 @@
+@@ -13760,7 +14306,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -5677,7 +5632,7 @@
hppa*64*|ia64*)
;;
*)
-@@ -13782,18 +14328,28 @@
+@@ -13785,18 +14331,28 @@
;;
chorus*)
case $cc_basename in
@@ -5709,7 +5664,7 @@
# Green Hills C++ Compiler
lt_prog_compiler_pic_CXX='-pic'
;;
-@@ -13801,22 +14357,22 @@
+@@ -13804,22 +14360,22 @@
;;
esac
;;
@@ -5736,7 +5691,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -13831,7 +14387,7 @@
+@@ -13834,7 +14390,7 @@
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
@@ -5745,7 +5700,7 @@
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX='-non_shared'
# CC pic flag -KPIC is the default.
-@@ -13842,18 +14398,24 @@
+@@ -13845,18 +14401,24 @@
;;
linux*)
case $cc_basename in
@@ -5773,7 +5728,7 @@
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
-@@ -13870,25 +14432,25 @@
+@@ -13873,25 +14435,25 @@
;;
mvs*)
case $cc_basename in
@@ -5804,7 +5759,7 @@
# Digital/Compaq C++
lt_prog_compiler_wl_CXX='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
-@@ -13904,7 +14466,7 @@
+@@ -13907,7 +14469,7 @@
;;
sco*)
case $cc_basename in
@@ -5813,7 +5768,7 @@
lt_prog_compiler_pic_CXX='-fPIC'
;;
*)
-@@ -13913,13 +14475,13 @@
+@@ -13916,13 +14478,13 @@
;;
solaris*)
case $cc_basename in
@@ -5829,7 +5784,7 @@
# Green Hills C++ Compiler
lt_prog_compiler_pic_CXX='-PIC'
;;
-@@ -13929,12 +14491,12 @@
+@@ -13932,12 +14494,12 @@
;;
sunos4*)
case $cc_basename in
@@ -5844,7 +5799,7 @@
# Lucid
lt_prog_compiler_pic_CXX='-pic'
;;
-@@ -13944,7 +14506,7 @@
+@@ -13947,7 +14509,7 @@
;;
tandem*)
case $cc_basename in
@@ -5853,7 +5808,7 @@
# NonStop-UX NCC 3.20
lt_prog_compiler_pic_CXX='-KPIC'
;;
-@@ -13985,18 +14547,20 @@
+@@ -13988,18 +14550,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -5861,13 +5816,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:13991: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:14553: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:13994: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:14556: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:13995: \$? = $ac_status" >&5
-+ echo "$as_me:14557: \$? = $ac_status" >&5
+- echo "$as_me:13998: \$? = $ac_status" >&5
++ echo "$as_me:14560: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -5879,7 +5834,7 @@
lt_prog_compiler_pic_works_CXX=yes
fi
fi
-@@ -14017,7 +14581,7 @@
+@@ -14020,7 +14584,7 @@
fi
fi
@@ -5888,7 +5843,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_CXX=
-@@ -14039,38 +14603,36 @@
+@@ -14042,38 +14606,36 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -5909,13 +5864,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:14058: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:14615: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:14061: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:14618: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:14062: \$? = $ac_status" >&5
-+ echo "$as_me:14619: \$? = $ac_status" >&5
+- echo "$as_me:14065: \$? = $ac_status" >&5
++ echo "$as_me:14622: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -5939,7 +5894,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -14120,7 +14682,10 @@
+@@ -14123,7 +14685,10 @@
export_symbols_cmds_CXX="$ltdll_cmds"
;;
cygwin* | mingw*)
@@ -5951,7 +5906,7 @@
;;
*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-@@ -14203,7 +14768,7 @@
+@@ -14206,7 +14771,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -5960,7 +5915,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -14213,7 +14778,20 @@
+@@ -14216,7 +14781,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -5982,7 +5937,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -14278,7 +14856,7 @@
+@@ -14281,7 +14859,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -5991,7 +5946,7 @@
;;
beos*)
-@@ -14287,7 +14865,7 @@
+@@ -14290,7 +14868,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -6000,7 +5955,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -14303,7 +14881,7 @@
+@@ -14306,7 +14884,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -6009,7 +5964,7 @@
need_version=no
need_lib_prefix=no
-@@ -14315,7 +14893,8 @@
+@@ -14318,7 +14896,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -6019,7 +5974,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -14345,7 +14924,7 @@
+@@ -14348,7 +14927,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -6028,7 +5983,7 @@
;;
esac
;;
-@@ -14368,7 +14947,7 @@
+@@ -14371,7 +14950,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -6037,7 +5992,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -14391,7 +14970,7 @@
+@@ -14394,7 +14973,7 @@
dynamic_linker=no
;;
@@ -6046,7 +6001,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -14403,8 +14982,17 @@
+@@ -14406,8 +14985,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -6066,7 +6021,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -14422,7 +15010,7 @@
+@@ -14425,7 +15013,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -6075,7 +6030,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -14449,9 +15037,9 @@
+@@ -14452,9 +15040,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -6087,7 +6042,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -14466,7 +15054,7 @@
+@@ -14469,7 +15057,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -6096,7 +6051,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -14477,7 +15065,7 @@
+@@ -14480,7 +15068,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -6105,7 +6060,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -14539,22 +15127,19 @@
+@@ -14542,22 +15130,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -6134,7 +6089,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -14564,6 +15149,30 @@
+@@ -14567,6 +15152,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -6165,7 +6120,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -14573,7 +15182,7 @@
+@@ -14576,7 +15185,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -6174,7 +6129,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -14602,7 +15211,11 @@
+@@ -14605,7 +15214,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -6187,7 +6142,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -14622,7 +15235,7 @@
+@@ -14625,7 +15238,7 @@
os2*)
libname_spec='$name'
@@ -6196,7 +6151,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -14724,8 +15337,8 @@
+@@ -14727,8 +15340,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action_CXX=
if test -n "$hardcode_libdir_flag_spec_CXX" || \
@@ -6207,16 +6162,16 @@
# We can hardcode non-existant directories.
if test "$hardcode_direct_CXX" != no &&
-@@ -15384,7 +15997,7 @@
+@@ -15387,7 +16000,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 15387 "configure"
-+#line 16000 "configure"
+-#line 15390 "configure"
++#line 16003 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -15450,7 +16063,7 @@
+@@ -15453,7 +16066,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -6225,16 +6180,16 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-@@ -15482,7 +16095,7 @@
+@@ -15485,7 +16098,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 15485 "configure"
-+#line 16098 "configure"
+-#line 15488 "configure"
++#line 16101 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -15548,7 +16161,7 @@
+@@ -15551,7 +16164,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -6243,7 +6198,7 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-@@ -15599,7 +16212,8 @@
+@@ -15602,7 +16215,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -6253,7 +6208,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -15699,6 +16313,12 @@
+@@ -15702,6 +16316,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -6266,7 +6221,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -15729,7 +16349,7 @@
+@@ -15732,7 +16352,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -6275,7 +6230,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -15760,7 +16380,7 @@
+@@ -15763,7 +16383,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -6284,7 +6239,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -15775,7 +16395,7 @@
+@@ -15778,7 +16398,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
@@ -6293,7 +6248,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -15977,7 +16597,10 @@
+@@ -15980,7 +16600,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -6305,7 +6260,7 @@
fi
-@@ -16053,12 +16676,35 @@
+@@ -16056,12 +16679,35 @@
compiler=$CC
@@ -6342,7 +6297,7 @@
echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-@@ -16071,7 +16717,7 @@
+@@ -16074,7 +16720,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
@@ -6351,7 +6306,7 @@
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
-@@ -16079,8 +16725,10 @@
+@@ -16082,8 +16728,10 @@
postinstall_cmds='$RANLIB $lib'
fi
;;
@@ -6364,7 +6319,7 @@
;;
esac
echo "$as_me:$LINENO: result: $enable_shared" >&5
-@@ -16157,7 +16805,7 @@
+@@ -16160,7 +16808,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -6373,7 +6328,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -16183,6 +16831,16 @@
+@@ -16186,6 +16834,16 @@
lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
fi
;;
@@ -6390,7 +6345,7 @@
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
-@@ -16194,7 +16852,7 @@
+@@ -16197,7 +16855,7 @@
lt_prog_compiler_wl_F77='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -6399,7 +6354,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -16218,12 +16876,19 @@
+@@ -16221,12 +16879,19 @@
;;
linux*)
@@ -6420,7 +6375,7 @@
ccc*)
lt_prog_compiler_wl_F77='-Wl,'
# All Alpha code is PIC.
-@@ -16244,9 +16909,14 @@
+@@ -16247,9 +16912,14 @@
;;
solaris*)
@@ -6436,7 +6391,7 @@
;;
sunos4*)
-@@ -16268,6 +16938,11 @@
+@@ -16271,6 +16941,11 @@
fi
;;
@@ -6448,7 +6403,7 @@
uts4*)
lt_prog_compiler_pic_F77='-pic'
lt_prog_compiler_static_F77='-Bstatic'
-@@ -16302,18 +16977,20 @@
+@@ -16305,18 +16980,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -6456,13 +6411,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:16308: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:16983: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:16311: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:16986: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:16312: \$? = $ac_status" >&5
-+ echo "$as_me:16987: \$? = $ac_status" >&5
+- echo "$as_me:16315: \$? = $ac_status" >&5
++ echo "$as_me:16990: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -6474,7 +6429,7 @@
lt_prog_compiler_pic_works_F77=yes
fi
fi
-@@ -16334,7 +17011,7 @@
+@@ -16337,7 +17014,7 @@
fi
fi
@@ -6483,7 +6438,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_F77=
-@@ -16356,38 +17033,36 @@
+@@ -16359,38 +17036,36 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -6504,13 +6459,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:16375: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:17045: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:16378: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:17048: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:16379: \$? = $ac_status" >&5
-+ echo "$as_me:17049: \$? = $ac_status" >&5
+- echo "$as_me:16382: \$? = $ac_status" >&5
++ echo "$as_me:17052: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -6534,7 +6489,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -16458,6 +17133,16 @@
+@@ -16461,6 +17136,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
@@ -6551,7 +6506,7 @@
case $host_os in
cygwin* | mingw* | pw32*)
-@@ -16478,6 +17163,27 @@
+@@ -16481,6 +17166,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -6579,7 +6534,7 @@
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
-@@ -16515,7 +17221,7 @@
+@@ -16518,7 +17224,7 @@
allow_undefined_flag_F77=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -6588,7 +6543,7 @@
else
ld_shlibs_F77=no
fi
-@@ -16525,13 +17231,13 @@
+@@ -16528,13 +17234,13 @@
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec_F77='-L$libdir'
@@ -6605,7 +6560,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -16540,19 +17246,51 @@
+@@ -16543,19 +17249,51 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -6662,7 +6617,7 @@
fi
;;
-@@ -16570,8 +17308,8 @@
+@@ -16573,8 +17311,8 @@
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -6673,7 +6628,7 @@
else
ld_shlibs_F77=no
fi
-@@ -16586,24 +17324,19 @@
+@@ -16589,24 +17327,19 @@
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -6705,7 +6660,7 @@
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
-@@ -16637,9 +17370,20 @@
+@@ -16640,9 +17373,20 @@
else
export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
@@ -6728,7 +6683,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -16656,7 +17400,7 @@
+@@ -16659,7 +17403,7 @@
link_all_deplibs_F77=yes
if test "$GCC" = yes; then
@@ -6737,7 +6692,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -16677,6 +17421,9 @@
+@@ -16680,6 +17424,9 @@
fi
esac
shared_flag='-shared'
@@ -6747,7 +6702,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -16685,21 +17432,22 @@
+@@ -16688,21 +17435,22 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -6775,7 +6730,7 @@
program main
end
-@@ -16740,14 +17488,13 @@
+@@ -16743,14 +17491,13 @@
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
@@ -6793,7 +6748,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
-@@ -16801,8 +17548,8 @@
+@@ -16804,8 +17551,8 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_F77=' '
archive_cmds_need_lc_F77=yes
@@ -6804,7 +6759,7 @@
fi
fi
;;
-@@ -16815,7 +17562,7 @@
+@@ -16818,7 +17565,7 @@
ld_shlibs_F77=no
;;
@@ -6813,7 +6768,7 @@
export_dynamic_flag_spec_F77=-rdynamic
;;
-@@ -16825,68 +17572,68 @@
+@@ -16828,68 +17575,68 @@
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec_F77=' '
@@ -6926,7 +6881,7 @@
fi
;;
-@@ -16920,8 +17667,8 @@
+@@ -16923,8 +17670,8 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
@@ -6937,7 +6892,7 @@
hardcode_libdir_flag_spec_F77='-R$libdir'
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
-@@ -16929,7 +17676,7 @@
+@@ -16932,7 +17679,7 @@
hpux9*)
if test "$GCC" = yes; then
@@ -6946,7 +6901,7 @@
else
archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -16945,16 +17692,16 @@
+@@ -16948,16 +17695,16 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
@@ -6967,7 +6922,7 @@
hppa*64*|ia64*)
archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
-@@ -16964,7 +17711,7 @@
+@@ -16967,7 +17714,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
@@ -6976,7 +6931,7 @@
hppa*64*)
hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-@@ -16997,7 +17744,7 @@
+@@ -17000,7 +17747,7 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -6985,7 +6940,7 @@
else
archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-@@ -17007,7 +17754,7 @@
+@@ -17010,7 +17757,7 @@
link_all_deplibs_F77=yes
;;
@@ -6994,7 +6949,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -17030,7 +17777,8 @@
+@@ -17033,7 +17780,8 @@
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
@@ -7004,7 +6959,7 @@
hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
export_dynamic_flag_spec_F77='${wl}-E'
else
-@@ -17040,7 +17788,7 @@
+@@ -17043,7 +17791,7 @@
hardcode_libdir_flag_spec_F77='-R$libdir'
;;
*)
@@ -7013,7 +6968,7 @@
hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
;;
esac
-@@ -17051,14 +17799,14 @@
+@@ -17054,14 +17802,14 @@
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_minus_L_F77=yes
allow_undefined_flag_F77=unsupported
@@ -7030,7 +6985,7 @@
else
allow_undefined_flag_F77=' -expect_unresolved \*'
archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-@@ -17070,13 +17818,13 @@
+@@ -17073,13 +17821,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
@@ -7046,7 +7001,7 @@
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec_F77='-rpath $libdir'
-@@ -17095,10 +17843,12 @@
+@@ -17098,10 +17846,12 @@
solaris*)
no_undefined_flag_F77=' -z text'
if test "$GCC" = yes; then
@@ -7061,7 +7016,7 @@
archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-@@ -17107,8 +17857,18 @@
+@@ -17110,8 +17860,18 @@
hardcode_shlibpath_var_F77=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
@@ -7082,7 +7037,7 @@
esac
link_all_deplibs_F77=yes
;;
-@@ -17117,7 +17877,7 @@
+@@ -17120,7 +17880,7 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
@@ -7091,7 +7046,7 @@
else
archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -17177,9 +17937,9 @@
+@@ -17180,9 +17940,9 @@
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag_F77='${wl}-z ${wl}text'
if test "$GCC" = yes; then
@@ -7103,7 +7058,7 @@
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var_F77=no
-@@ -17285,7 +18045,7 @@
+@@ -17288,7 +18048,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -7112,7 +7067,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -17295,7 +18055,20 @@
+@@ -17298,7 +18058,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -7134,7 +7089,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -17360,7 +18133,7 @@
+@@ -17363,7 +18136,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -7143,7 +7098,7 @@
;;
beos*)
-@@ -17369,7 +18142,7 @@
+@@ -17372,7 +18145,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -7152,7 +7107,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -17385,7 +18158,7 @@
+@@ -17388,7 +18161,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -7161,7 +7116,7 @@
need_version=no
need_lib_prefix=no
-@@ -17397,7 +18170,8 @@
+@@ -17400,7 +18173,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -7171,7 +7126,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -17427,7 +18201,7 @@
+@@ -17430,7 +18204,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -7180,7 +7135,7 @@
;;
esac
;;
-@@ -17450,7 +18224,7 @@
+@@ -17453,7 +18227,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -7189,7 +7144,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -17473,7 +18247,7 @@
+@@ -17476,7 +18250,7 @@
dynamic_linker=no
;;
@@ -7198,7 +7153,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -17485,8 +18259,17 @@
+@@ -17488,8 +18262,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -7218,7 +7173,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -17504,7 +18287,7 @@
+@@ -17507,7 +18290,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -7227,7 +7182,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -17531,9 +18314,9 @@
+@@ -17534,9 +18317,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -7239,7 +7194,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -17548,7 +18331,7 @@
+@@ -17551,7 +18334,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -7248,7 +7203,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -17559,7 +18342,7 @@
+@@ -17562,7 +18345,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -7257,7 +7212,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -17621,22 +18404,19 @@
+@@ -17624,22 +18407,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -7286,7 +7241,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -17646,6 +18426,30 @@
+@@ -17649,6 +18429,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -7317,7 +7272,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -17655,7 +18459,7 @@
+@@ -17658,7 +18462,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -7326,7 +7281,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -17684,7 +18488,11 @@
+@@ -17687,7 +18491,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -7339,7 +7294,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -17704,7 +18512,7 @@
+@@ -17707,7 +18515,7 @@
os2*)
libname_spec='$name'
@@ -7348,7 +7303,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -17806,8 +18614,8 @@
+@@ -17809,8 +18617,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action_F77=
if test -n "$hardcode_libdir_flag_spec_F77" || \
@@ -7359,7 +7314,7 @@
# We can hardcode non-existant directories.
if test "$hardcode_direct_F77" != no &&
-@@ -17883,7 +18691,8 @@
+@@ -17886,7 +18694,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -7369,7 +7324,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -17983,6 +18792,12 @@
+@@ -17986,6 +18795,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -7382,7 +7337,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -18013,7 +18828,7 @@
+@@ -18016,7 +18831,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -7391,7 +7346,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -18044,7 +18859,7 @@
+@@ -18047,7 +18862,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -7400,7 +7355,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -18059,7 +18874,7 @@
+@@ -18062,7 +18877,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
@@ -7409,7 +7364,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -18261,7 +19076,10 @@
+@@ -18264,7 +19079,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -7421,7 +7376,7 @@
fi
-@@ -18294,7 +19112,7 @@
+@@ -18297,7 +19115,7 @@
lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
@@ -7430,7 +7385,7 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-@@ -18305,15 +19123,41 @@
+@@ -18308,15 +19126,41 @@
compiler=$CC
@@ -7472,7 +7427,7 @@
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
-@@ -18340,18 +19184,20 @@
+@@ -18343,18 +19187,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -7480,13 +7435,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:18346: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:19190: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:18349: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:19193: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:18350: \$? = $ac_status" >&5
-+ echo "$as_me:19194: \$? = $ac_status" >&5
+- echo "$as_me:18353: \$? = $ac_status" >&5
++ echo "$as_me:19197: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -7498,7 +7453,7 @@
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
-@@ -18428,7 +19274,7 @@
+@@ -18431,7 +19277,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -7507,7 +7462,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -18454,6 +19300,16 @@
+@@ -18457,6 +19303,16 @@
lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
fi
;;
@@ -7524,7 +7479,7 @@
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
-@@ -18465,7 +19321,7 @@
+@@ -18468,7 +19324,7 @@
lt_prog_compiler_wl_GCJ='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
@@ -7533,7 +7488,7 @@
hppa*64*|ia64*)
# +Z the default
;;
-@@ -18489,12 +19345,19 @@
+@@ -18492,12 +19348,19 @@
;;
linux*)
@@ -7554,7 +7509,7 @@
ccc*)
lt_prog_compiler_wl_GCJ='-Wl,'
# All Alpha code is PIC.
-@@ -18515,9 +19378,14 @@
+@@ -18518,9 +19381,14 @@
;;
solaris*)
@@ -7570,7 +7525,7 @@
;;
sunos4*)
-@@ -18539,6 +19407,11 @@
+@@ -18542,6 +19410,11 @@
fi
;;
@@ -7582,7 +7537,7 @@
uts4*)
lt_prog_compiler_pic_GCJ='-pic'
lt_prog_compiler_static_GCJ='-Bstatic'
-@@ -18573,18 +19446,20 @@
+@@ -18576,18 +19449,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
@@ -7590,13 +7545,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:18579: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:19452: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:18582: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:19455: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
-- echo "$as_me:18583: \$? = $ac_status" >&5
-+ echo "$as_me:19456: \$? = $ac_status" >&5
+- echo "$as_me:18586: \$? = $ac_status" >&5
++ echo "$as_me:19459: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
@@ -7608,7 +7563,7 @@
lt_prog_compiler_pic_works_GCJ=yes
fi
fi
-@@ -18605,7 +19480,7 @@
+@@ -18608,7 +19483,7 @@
fi
fi
@@ -7617,7 +7572,7 @@
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_GCJ=
-@@ -18627,38 +19502,36 @@
+@@ -18630,38 +19505,36 @@
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
@@ -7638,13 +7593,13 @@
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:18646: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:19514: $lt_compile\"" >&5)
+- (eval echo "\"\$as_me:18649: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:19517: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
-- echo "$as_me:18650: \$? = $ac_status" >&5
-+ echo "$as_me:19518: \$? = $ac_status" >&5
+- echo "$as_me:18653: \$? = $ac_status" >&5
++ echo "$as_me:19521: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -7668,7 +7623,7 @@
cd ..
rmdir conftest
$rm conftest*
-@@ -18729,6 +19602,16 @@
+@@ -18732,6 +19605,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
@@ -7685,7 +7640,7 @@
case $host_os in
cygwin* | mingw* | pw32*)
-@@ -18749,6 +19632,27 @@
+@@ -18752,6 +19635,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -7713,7 +7668,7 @@
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
-@@ -18786,7 +19690,7 @@
+@@ -18789,7 +19693,7 @@
allow_undefined_flag_GCJ=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
@@ -7722,7 +7677,7 @@
else
ld_shlibs_GCJ=no
fi
-@@ -18796,13 +19700,13 @@
+@@ -18799,13 +19703,13 @@
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec_GCJ='-L$libdir'
@@ -7739,7 +7694,7 @@
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-@@ -18811,19 +19715,51 @@
+@@ -18814,19 +19718,51 @@
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
@@ -7796,7 +7751,7 @@
fi
;;
-@@ -18841,8 +19777,8 @@
+@@ -18844,8 +19780,8 @@
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -7807,7 +7762,7 @@
else
ld_shlibs_GCJ=no
fi
-@@ -18857,24 +19793,19 @@
+@@ -18860,24 +19796,19 @@
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -7839,7 +7794,7 @@
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
-@@ -18908,9 +19839,20 @@
+@@ -18911,9 +19842,20 @@
else
export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
@@ -7862,7 +7817,7 @@
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
-@@ -18927,7 +19869,7 @@
+@@ -18930,7 +19872,7 @@
link_all_deplibs_GCJ=yes
if test "$GCC" = yes; then
@@ -7871,7 +7826,7 @@
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
-@@ -18948,6 +19890,9 @@
+@@ -18951,6 +19893,9 @@
fi
esac
shared_flag='-shared'
@@ -7881,7 +7836,7 @@
else
# not using gcc
if test "$host_cpu" = ia64; then
-@@ -18956,21 +19901,22 @@
+@@ -18959,21 +19904,22 @@
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
@@ -7909,7 +7864,7 @@
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
-@@ -19021,14 +19967,13 @@
+@@ -19024,14 +19970,13 @@
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
@@ -7927,7 +7882,7 @@
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
-@@ -19092,8 +20037,8 @@
+@@ -19095,8 +20040,8 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_GCJ=' '
archive_cmds_need_lc_GCJ=yes
@@ -7938,7 +7893,7 @@
fi
fi
;;
-@@ -19106,7 +20051,7 @@
+@@ -19109,7 +20054,7 @@
ld_shlibs_GCJ=no
;;
@@ -7947,7 +7902,7 @@
export_dynamic_flag_spec_GCJ=-rdynamic
;;
-@@ -19116,68 +20061,68 @@
+@@ -19119,68 +20064,68 @@
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec_GCJ=' '
@@ -8060,7 +8015,7 @@
fi
;;
-@@ -19211,8 +20156,8 @@
+@@ -19214,8 +20159,8 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
@@ -8071,7 +8026,7 @@
hardcode_libdir_flag_spec_GCJ='-R$libdir'
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
-@@ -19220,7 +20165,7 @@
+@@ -19223,7 +20168,7 @@
hpux9*)
if test "$GCC" = yes; then
@@ -8080,7 +8035,7 @@
else
archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -19236,16 +20181,16 @@
+@@ -19239,16 +20184,16 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
@@ -8101,7 +8056,7 @@
hppa*64*|ia64*)
archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
-@@ -19255,7 +20200,7 @@
+@@ -19258,7 +20203,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
@@ -8110,7 +8065,7 @@
hppa*64*)
hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-@@ -19288,7 +20233,7 @@
+@@ -19291,7 +20236,7 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -8119,7 +8074,7 @@
else
archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-@@ -19298,7 +20243,7 @@
+@@ -19301,7 +20246,7 @@
link_all_deplibs_GCJ=yes
;;
@@ -8128,7 +8083,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -19321,7 +20266,8 @@
+@@ -19324,7 +20269,8 @@
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
@@ -8138,7 +8093,7 @@
hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
export_dynamic_flag_spec_GCJ='${wl}-E'
else
-@@ -19331,7 +20277,7 @@
+@@ -19334,7 +20280,7 @@
hardcode_libdir_flag_spec_GCJ='-R$libdir'
;;
*)
@@ -8147,7 +8102,7 @@
hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
;;
esac
-@@ -19342,14 +20288,14 @@
+@@ -19345,14 +20291,14 @@
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_minus_L_GCJ=yes
allow_undefined_flag_GCJ=unsupported
@@ -8164,7 +8119,7 @@
else
allow_undefined_flag_GCJ=' -expect_unresolved \*'
archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-@@ -19361,13 +20307,13 @@
+@@ -19364,13 +20310,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
@@ -8180,7 +8135,7 @@
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-@@ -19386,10 +20332,12 @@
+@@ -19389,10 +20335,12 @@
solaris*)
no_undefined_flag_GCJ=' -z text'
if test "$GCC" = yes; then
@@ -8195,7 +8150,7 @@
archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-@@ -19398,8 +20346,18 @@
+@@ -19401,8 +20349,18 @@
hardcode_shlibpath_var_GCJ=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
@@ -8216,7 +8171,7 @@
esac
link_all_deplibs_GCJ=yes
;;
-@@ -19408,7 +20366,7 @@
+@@ -19411,7 +20369,7 @@
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
@@ -8225,7 +8180,7 @@
else
archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -19468,9 +20426,9 @@
+@@ -19471,9 +20429,9 @@
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag_GCJ='${wl}-z ${wl}text'
if test "$GCC" = yes; then
@@ -8237,7 +8192,7 @@
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var_GCJ=no
-@@ -19576,7 +20534,7 @@
+@@ -19579,7 +20537,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -8246,7 +8201,7 @@
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
-@@ -19586,7 +20544,20 @@
+@@ -19589,7 +20547,20 @@
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
@@ -8268,7 +8223,7 @@
need_lib_prefix=unknown
hardcode_into_libs=no
-@@ -19651,7 +20622,7 @@
+@@ -19654,7 +20625,7 @@
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
@@ -8277,7 +8232,7 @@
;;
beos*)
-@@ -19660,7 +20631,7 @@
+@@ -19663,7 +20634,7 @@
shlibpath_var=LIBRARY_PATH
;;
@@ -8286,7 +8241,7 @@
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-@@ -19676,7 +20647,7 @@
+@@ -19679,7 +20650,7 @@
cygwin* | mingw* | pw32*)
version_type=windows
@@ -8295,7 +8250,7 @@
need_version=no
need_lib_prefix=no
-@@ -19688,7 +20659,8 @@
+@@ -19691,7 +20662,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
@@ -8305,7 +8260,7 @@
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
-@@ -19718,7 +20690,7 @@
+@@ -19721,7 +20693,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -8314,7 +8269,7 @@
;;
esac
;;
-@@ -19741,7 +20713,7 @@
+@@ -19744,7 +20716,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
@@ -8323,7 +8278,7 @@
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-@@ -19764,7 +20736,7 @@
+@@ -19767,7 +20739,7 @@
dynamic_linker=no
;;
@@ -8332,7 +8287,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
-@@ -19776,8 +20748,17 @@
+@@ -19779,8 +20751,17 @@
dynamic_linker='GNU ld.so'
;;
@@ -8352,7 +8307,7 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
-@@ -19795,7 +20776,7 @@
+@@ -19798,7 +20779,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
@@ -8361,7 +8316,7 @@
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
-@@ -19822,9 +20803,9 @@
+@@ -19825,9 +20806,9 @@
version_type=sunos
need_lib_prefix=no
need_version=no
@@ -8373,7 +8328,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
-@@ -19839,7 +20820,7 @@
+@@ -19842,7 +20823,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
@@ -8382,7 +8337,7 @@
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-@@ -19850,7 +20831,7 @@
+@@ -19853,7 +20834,7 @@
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
@@ -8391,7 +8346,7 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-@@ -19912,22 +20893,19 @@
+@@ -19915,22 +20896,19 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
@@ -8420,7 +8375,7 @@
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
-@@ -19937,6 +20915,30 @@
+@@ -19940,6 +20918,30 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -8451,7 +8406,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -19946,7 +20948,7 @@
+@@ -19949,7 +20951,7 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
@@ -8460,7 +8415,7 @@
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
-@@ -19975,7 +20977,11 @@
+@@ -19978,7 +20980,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
@@ -8473,7 +8428,7 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
-@@ -19995,7 +21001,7 @@
+@@ -19998,7 +21004,7 @@
os2*)
libname_spec='$name'
@@ -8482,7 +8437,7 @@
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
-@@ -20097,8 +21103,8 @@
+@@ -20100,8 +21106,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action_GCJ=
if test -n "$hardcode_libdir_flag_spec_GCJ" || \
@@ -8493,16 +8448,16 @@
# We can hardcode non-existant directories.
if test "$hardcode_direct_GCJ" != no &&
-@@ -20757,7 +21763,7 @@
+@@ -20760,7 +21766,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 20760 "configure"
-+#line 21766 "configure"
+-#line 20763 "configure"
++#line 21769 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -20823,7 +21829,7 @@
+@@ -20826,7 +21832,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -8511,16 +8466,16 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-@@ -20855,7 +21861,7 @@
+@@ -20858,7 +21864,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
--#line 20858 "configure"
-+#line 21864 "configure"
+-#line 20861 "configure"
++#line 21867 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -20921,7 +21927,7 @@
+@@ -20924,7 +21930,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -8529,7 +8484,7 @@
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-@@ -20972,7 +21978,8 @@
+@@ -20975,7 +21981,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -8539,7 +8494,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -21072,6 +22079,12 @@
+@@ -21075,6 +22082,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -8552,7 +8507,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -21102,7 +22115,7 @@
+@@ -21105,7 +22118,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -8561,7 +8516,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -21133,7 +22146,7 @@
+@@ -21136,7 +22149,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -8570,7 +8525,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -21148,7 +22161,7 @@
+@@ -21151,7 +22164,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
@@ -8579,7 +8534,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -21350,7 +22363,10 @@
+@@ -21353,7 +22366,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -8591,7 +8546,7 @@
fi
-@@ -21393,11 +22409,35 @@
+@@ -21396,11 +22412,35 @@
compiler=$CC
@@ -8627,7 +8582,7 @@
lt_cv_prog_compiler_c_o_RC=yes
# The else clause should only fire when bootstrapping the
-@@ -21413,7 +22453,8 @@
+@@ -21416,7 +22456,8 @@
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
@@ -8637,7 +8592,7 @@
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
-@@ -21513,6 +22554,12 @@
+@@ -21516,6 +22557,12 @@
# The host system.
host_alias=$host_alias
host=$host
@@ -8650,7 +8605,7 @@
# An echo program that does not interpret backslashes.
echo=$lt_echo
-@@ -21543,7 +22590,7 @@
+@@ -21546,7 +22593,7 @@
NM=$lt_NM
# A symbol stripping program
@@ -8659,7 +8614,7 @@
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
-@@ -21574,7 +22621,7 @@
+@@ -21577,7 +22624,7 @@
libext="$libext"
# Shared library suffix (normally ".so").
@@ -8668,7 +8623,7 @@
# Executable file suffix (normally "").
exeext="$exeext"
-@@ -21589,7 +22636,7 @@
+@@ -21592,7 +22639,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
@@ -8677,7 +8632,7 @@
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
-@@ -21791,7 +22838,10 @@
+@@ -21794,7 +22841,10 @@
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
@@ -8689,7 +8644,7 @@
fi
-@@ -21838,7 +22888,7 @@
+@@ -21841,7 +22891,7 @@
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
# Always use our own libtool.
@@ -8698,7 +8653,7 @@
# Prevent multiple expansion
-@@ -22237,9 +23287,6 @@
+@@ -22240,9 +23290,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8708,7 +8663,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -22456,9 +23503,6 @@
+@@ -22459,9 +23506,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8718,7 +8673,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -24639,9 +25683,6 @@
+@@ -24642,9 +25686,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8728,70 +8683,70 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -29531,7 +30572,7 @@
+@@ -29534,7 +30575,7 @@
do
for j in jpeglib.h;
do
-- echo "configure: 29534: $i/$j" >&5
-+ echo "configure: 30575: $i/$j" >&5
+- echo "configure: 29537: $i/$j" >&5
++ echo "configure: 30578: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
jpeg_incdir=$i
-@@ -29829,7 +30870,7 @@
+@@ -29832,7 +30873,7 @@
do
for j in $kde_qt_header;
do
-- echo "configure: 29832: $i/$j" >&5
-+ echo "configure: 30873: $i/$j" >&5
+- echo "configure: 29835: $i/$j" >&5
++ echo "configure: 30876: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
qt_incdir=$i
-@@ -30665,7 +31706,7 @@
+@@ -30668,7 +31709,7 @@
do
for j in $kde_check_header;
do
-- echo "configure: 30668: $i/$j" >&5
-+ echo "configure: 31709: $i/$j" >&5
+- echo "configure: 30671: $i/$j" >&5
++ echo "configure: 31712: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_incdir=$i
-@@ -30695,7 +31736,7 @@
+@@ -30698,7 +31739,7 @@
do
for j in $kde_check_lib;
do
-- echo "configure: 30698: $i/$j" >&5
-+ echo "configure: 31739: $i/$j" >&5
+- echo "configure: 30701: $i/$j" >&5
++ echo "configure: 31742: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_libdir=$i
-@@ -30713,7 +31754,7 @@
+@@ -30716,7 +31757,7 @@
do
for j in "kde3/plugins/designer/kdewidgets.la";
do
-- echo "configure: 30716: $i/$j" >&5
-+ echo "configure: 31757: $i/$j" >&5
+- echo "configure: 30719: $i/$j" >&5
++ echo "configure: 31760: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_widgetdir=$i
-@@ -32236,7 +33277,7 @@
+@@ -32239,7 +33280,7 @@
do
for j in apps/ksgmltools2/customization/kde-chunk.xsl;
do
-- echo "configure: 32239: $i/$j" >&5
-+ echo "configure: 33280: $i/$j" >&5
+- echo "configure: 32242: $i/$j" >&5
++ echo "configure: 33283: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
KDE_XSL_STYLESHEET=$i
-@@ -32420,7 +33461,7 @@
+@@ -32423,7 +33464,7 @@
do
for j in qsql.html;
do
-- echo "configure: 32423: $i/$j" >&5
-+ echo "configure: 33464: $i/$j" >&5
+- echo "configure: 32426: $i/$j" >&5
++ echo "configure: 33467: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
QTDOCDIR=$i
-@@ -34124,9 +35165,6 @@
+@@ -34127,9 +35168,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8801,7 +8756,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -34337,9 +35375,6 @@
+@@ -34340,9 +35378,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8811,7 +8766,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -34550,9 +35585,6 @@
+@@ -34553,9 +35588,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8821,7 +8776,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -34774,9 +35806,6 @@
+@@ -34777,9 +35809,6 @@
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
@@ -8831,7 +8786,7 @@
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
-@@ -35820,6 +36849,13 @@
+@@ -35827,6 +36856,13 @@
LTLIBOBJS=$ac_ltlibobjs
@@ -8845,7 +8800,7 @@
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
{ { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
-@@ -36476,6 +37512,9 @@
+@@ -36484,6 +37520,9 @@
s, at AMTAR@,$AMTAR,;t t
s, at am__tar@,$am__tar,;t t
s, at am__untar@,$am__untar,;t t
@@ -8859,238 +8814,37 @@
+++ configure.in
@@ -42,6 +42,8 @@
dnl Automake doc recommends to do this only here. (Janos)
- AM_INIT_AUTOMAKE(rsibreak-0.5.0, "3.5.1") dnl searches for some needed programs
+ AM_INIT_AUTOMAKE(rsibreak-0.6.0-rc1, "3.5.2") dnl searches for some needed programs
+AM_MAINTAINER_MODE
+
KDE_SET_PREFIX
dnl generate the config header
---- doc/Makefile.in
-+++ doc/Makefile.in
-@@ -192,6 +192,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -335,7 +338,7 @@
- all: docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -344,9 +347,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu doc/Makefile
-+#>- $(AUTOMAKE) --foreign doc/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -356,9 +359,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu doc/Makefile
-+ $(AUTOMAKE) --foreign doc/Makefile
- cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -373,9 +376,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -703,9 +706,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu doc/Makefile
-+ $(AUTOMAKE) --foreign doc/Makefile
- cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
-
-
---- po/Makefile.in
-+++ po/Makefile.in
-@@ -192,6 +192,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -333,7 +336,7 @@
- all: docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -342,9 +345,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/Makefile
-+#>- $(AUTOMAKE) --foreign po/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -354,9 +357,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/Makefile
-+ $(AUTOMAKE) --foreign po/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -371,9 +374,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -675,9 +678,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/Makefile
-+ $(AUTOMAKE) --foreign po/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/Makefile.in
-
-
---- po/bg/Makefile.in
-+++ po/bg/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/bg/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/bg/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/bg/Makefile
-+#>- $(AUTOMAKE) --foreign po/bg/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/bg/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/bg/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/bg/Makefile
-+ $(AUTOMAKE) --foreign po/bg/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/bg/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/bg/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/bg/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/bg/Makefile
-+ $(AUTOMAKE) --foreign po/bg/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/bg/Makefile.in
-
-
--- po/bg/rsibreak.gmo
+++ po/bg/rsibreak.gmo
-@@ -0,0 +1,71 @@
-+Þ• I d a ¬ 0 ( 1 Z
-+ n y › ®
-+ µ À
Ï Ý ç ö
-+ ý ! ÿ 6 c 6 š ° ¸ Ë Ó ä ê ü * @ & J q w
€ Ž ž ± , R
-+ 7
-+ – ·
-+ N S ] n ! x š ¢ ® D À ý
Ù
{ å
Õ a ^ 7 Ÿ – T 6 ^ ‹ _ ê # J p n q ß ! Q > s ² Ë ä þ 9 R Z K b T ® ' +
-+ > L I / – Æ Ó 6 å ( E
N \ c , ¬ ; È « Ô ° + …
-+ ± ¼ Ô Ý ù = > I & ˆ ¯ ¾ Ô & ë ! 4 ) = $ g # Œ ö ° . § b Ö E 9 ” ¦ à Q Ð " 9 # S « w # Ò 9 ³ " ð À# ‡ ±$ ¨ 9& , â& ¨ ( G ¸( : ) ;) M T) @ ¢) ã) ÿ) * * % !* ) G* e q* ×* ä* 4 , 1 B ! = 5 ? 3 I * & H > . # / +
-+ ' G $ % - C <
" @ A F 8 7 E ; : 0 2 D ) 6 9 ( &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Changes in RSIBreak 0.5.0
+@@ -0,0 +1,87 @@
++Þ• ~ ü °
++ ! ±
++ " Ó
++ ( ö
++
++ 3 > F ` s & z
++ ¡ ¬ È ×
á ï ù
++
++ + 6 > ÿ S c S
[ ·
) 1 D L ] c Z u + Ð , ü ) © + = L \ i x Ž ˜ # ¬ # Ð $ ô $ & > e k w Ž ”
« ± Æ Ö é , Š 7 · – ï † ‹ • ¦ ° f Ï ; 6 L r P ¿ 9 ' J G r @ º ' û Q # : u + ° ! Ü > þ = + B n v ‚ ” » × ë D ] n ý v Ù t { N Õ Ê ^ Ÿ ÿ T Ÿ ô Ý v [ T B ° D ó # 8 ! \ > ~ c ½ c ! … ž · Í ç 9 ! ;! N! h! ‚! K •! E á" C '# T k# ' À# è#
++ û# L $ / S$ ƒ$ X $ é$ K û$ 6 G% ~% ( % ¸%
Á% Ï% Ö% , ò% & ;& ; W& « “& Ô ?( Å ) + Ú)
++ * * )* 2* N* = `* ª ž* h I+ f ²+ ø , ÷ - >
++. , I. * v. & ¡. È. ×. í. + / N 0/ P / P Ð/ N !0 & p0
++ —0
++ ¢0 ! 0 ! Ï0 ñ0 ) ú0 $1 0 71 $ h1 # 1 ö ±1 . ¨2 b ×2 E :3 €4 •4 §4 Ä4 * Ñ4 › ü4 e ˜5 þ5 Œ ~6 h 7 @ t7 „ µ7 :8 = º8 Š ø8 f ƒ9 U ê9 Q @: R ’:
++ å: C ð: 4; K; # e; ‰; + £; 2 Ï; $ < * '< & R< « y< . %= T= Ò j= ³ =? ð ñ@ ‡ âA ¨ jC , D ¨ @E ø éE Ó âF ¶H WI `I iI ‚I žI ´I ÁI ÐI ÖI ÜI % øI ) J e HJ ®J % ÌJ ) òJ ! K ! D : 1 3 k n z w j N c . R o ] q 6 J 9 K ^ & d < F Q M - Z ' ) \ s y
++ $ A 4 x L H } f E l p b a % u 0 + [ " / ~ , _ 5 P X ? { Y U ` B @ S G ( i * 8 r | h e I ; = T 7 C > t g 2 O V W v m #
%1 remaining until next big break %1 remaining until next tiny break &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Reset timers after period of idleness &Shortcut: &Show when timers are reset &Use the popup 0 seconds Abort a break About KDE About RSIBreak Author Big Breaks Big break every: Big breaks C&ustom Change images every: Changes in RSIBreak 0.5.0
+
+In this version we have changed the way the timers work. Instead of indicating after how many tiny breaks you want a big break, you can now setup after how many minutes you want a bigbreak.
+Please review your current settings.
+
-+ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Here you can set how long one image should be shown before it is replaced by the next one. Here you can set how long the big break is. Here you can set how long the tiny break is. Here you can set how often you want a big break. One minute means 60 seconds of movement with the mouse or work on the keyboard Here you can set how often you want a tiny break. One minute means 60 seconds of movement with the mouse or work on the keyboard. Image Folder Path Last big break Last tiny break Lock desktop Logo and Icons Maintainer and Author Maximized Maximum idle period Number of skipped big breaks (idle) Number of skipped big breaks (user) Number of skipped tiny breaks (idle) Number of skipped tiny breaks (user) Packaging and help with related issues Pause Pause score Percentage of activity Popup RSIBreak Report Bug... Reset Reset the statistics Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended The timers have now been reset This is a percentage of activity, based on the seconds of activity vs. total time RSIBreak is running. This is an indication how well you bahaved with the brakes. This is the biggest period of inactivity measured while RSIBreak is running. This is the total amount of big breaks which are skipped because you where idle. This is the total amount of big breaks which you skipped. This is the total amount of big breaks. This is the total amount of time you did not use the keyboard or mouse. This is the total amount of time you used the keyboard or mouse. This is the total amount of tiny breaks This is the total amount of tiny breaks which are skipped because you where idle. This is the total amount of tiny breaks which you skipped. This is the total time RSIBreak is running. This way you can have a break now This will reset all statistics to zero. Is that what you want? Time Timer for the tiny break has now been reset Timings Tiny Breaks Tiny break every: Tiny breaks Total amount of big breaks Total amount of tiny breaks Total recorded time Total time being idle Total time of activity Try to prevent Repetitive Strain Injury by reminding a user to rest. Usage Statistics Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -9103,33 +8857,38 @@
+turn this function off. When the popup is shown, it can flash
+when there is activity detected. You
+can turn it off when you find it too
-+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. With this checkbox you indicate that you want to see when the timers are reset. This happens when you have been idle for a while. With this checkbox you indicate that you want to use idle detection. Unchecked RSIBreak will not reset the timers when you are idle for the duration of a break, but it will take into account the seconds you work/are idle. You are using KDE 3.3 or older, with this version of KDE, you can not change this shortcut. _: Arguments: hours, minutes both as you defined earlier
++%1 and %2 _: Arguments: minutes, seconds both as you defined earlier
++%1 and %2 _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
-+Take a break now _: minutes:seconds
++Take a break now _: Translate this as the longest plural form. This is used to calculate the width of window
++minutes _: Translate this as the longest plural form. This is used to calculate the width of window
++seconds _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: One minute
++%1:00 _n: One hour
++%n hours _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
-+PO-Revision-Date: 2006-02-20 09:26+0200
++Please relax for %n seconds _n: minute
++minutes _n: one minute
++%n minutes _n: one second
++%n seconds _n: second
++seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
++PO-Revision-Date: 2006-03-28 23:28+0300
+Last-Translator: Zlatko Popov <zlatkopopov at fsa-bg.org>
+Language-Team: Bulgarian <dict at linux.zonebg.com>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+X-Generator: KBabel 1.11.1
-+ &Ðвтоматично зареждане на RSIBreak при Ñтартиране &ПромÑна на прÑк път... &ПромÑна... &ЦвÑÑ‚: &Изключване на Ð¿Ñ€ÐµÐºÐ¸Ñ Ð¿ÑŠÑ‚ до пропуÑкането &Примигване при активноÑÑ‚ &Шрифт: &ПрÑк път: &Използване на изÑкачащ екран ПрекъÑване на почивка За KDE За RSIBreak Author Големи почивки ГолÑма почивка на вÑеки: П&отребителÑки СмÑна на изображениÑта на вÑеки: Промени в RSIBreak 0.5.0
++X-Generator: KBabel 1.11.2
++ ОÑтава %1 до Ñледващата голÑма почивка ОÑтава %1 до Ñледващата малка почивка &Ðвтоматично зареждане на RSIBreak при Ñтартиране &ПромÑна на прÑк път... &ПромÑна... &ЦвÑÑ‚: &Изключване на Ð¿Ñ€ÐµÐºÐ¸Ñ Ð¿ÑŠÑ‚ до пропуÑкането &Примигване при активноÑÑ‚ &Шрифт: &Ðнулиране на таймерите Ñлед период неактивноÑÑ‚ &ПрÑк път: &Показване когато таймерите Ñа анулирани &Използване на изÑкачащ екран 0 Ñекунди ПрекъÑване на почивка За KDE За RSIBreak Author Големи почивки ГолÑма почивка на вÑеки: Големи почивки П&отребителÑки СмÑна на изображениÑта на вÑеки: Промени в RSIBreak 0.5.0
+
+Ð’ тази верÑÐ¸Ñ Ð¿Ñ€Ð¾Ð¼ÐµÐ½Ð¸Ñ…Ð¼Ðµ начина на работа на таймерите. ВмеÑто Ð¸Ð½Ð´Ð¸ÐºÐ°Ñ†Ð¸Ñ Ñлед колко малки почивки иÑкате голÑма, Ñега вече директно можете да зададете Ñлед колко време иÑкате да Ñтане това.
+МолÑ, вижте наÑтройките.
+
-+ Включете тази Ð¾Ð¿Ñ†Ð¸Ñ Ð·Ð° да изключите и Ñкриете бутона за пропуÑкане. По този начин почивката нÑма да бъде пропуÑната. Конфигуриране на RSIBreak... БроÑч За период от: Общи Общи наÑтройки Скр&иване С&криване на бутона за пропуÑкане Път до директориÑта Ñ Ð¸Ð·Ð¾Ð±Ñ€Ð°Ð¶ÐµÐ½Ð¸Ñ Ð—Ð°ÐºÐ»ÑŽÑ‡Ð²Ð°Ð½Ðµ на екрана Logo and Icons Maintainer and Author Минимизиран Packaging and help with related issues ИзÑкачащ прозорец RSIBreak Съобщаване за грешка... Продължение на RSIBreak РекурÑивно Ñ‚ÑŠÑ€Ñене Избор на цвÑÑ‚ на броÑча. Тъй като ще Ñе поÑвÑва над изображениÑта, може би ще предпочетете цвÑÑ‚, който е видим при повечето изображениÑ. Изберете шрифт за броÑча. Изберете на прекиÑÑ‚ път за прекратÑване на почивката. Изберете Ð´Ð¸Ñ€ÐµÐºÑ‚Ð¾Ñ€Ð¸Ñ Ð¾Ñ‚ коÑто иÑкате да виждате изображениÑ. ИзображениÑта ще бъдат показвани в Ñлучаен ред по време на почивките. Ðко иÑкате, Ñ‚ÑŠÑ€Ñенето може да бъде рекурÑивно... ПропуÑкане Слайд шоу Спиране на RSIBreak СпрÑна По този начин ще можете да направите почивка ОтброÑÐ²Ð°Ð½Ð¸Ñ ÐœÐ°Ð»ÐºÐ¸ почивки Малка почивка Ñлед: Опит за предотвратÑване на хронична умора поÑредÑтвом напомнÑне на Ð¿Ð¾Ñ‚Ñ€ÐµÐ±Ð¸Ñ‚ÐµÐ»Ñ Ð´Ð° Ñи почива. Добре дошли Добре дошли в RSIBreak
++ Включете тази Ð¾Ð¿Ñ†Ð¸Ñ Ð·Ð° да изключите и Ñкриете бутона за пропуÑкане. По този начин почивката нÑма да бъде пропуÑната. Включването на тази Ð¾Ð¿Ñ†Ð¸Ñ Ð´ÐµÐ°ÐºÑ‚Ð¸Ð²Ð¸Ñ€Ð° бутона за пропуÑкане. По този начин почивката нÑма да бъде пропуÑната. Конфигуриране на RSIBreak... БроÑч За период от: Общи Общи наÑтройки Скр&иване С&криване на бутона за пропуÑкане Тук можете да зададете колко време да Ñе показва изображението преди да бъде Ñменено Ñ Ð´Ñ€ÑƒÐ³Ð¾. Тук можете да зададете колко да е дълга голÑмата почивка. Тук можете да зададете колко дълга да е малката почивка. Тук можете да зададете колко чеÑто иÑкате голÑма почивка. Една минута означава 60 Ñекунди движение на мишката или работа Ñ ÐºÐ»Ð°Ð²Ð¸Ð°Ñ‚ÑƒÑ€Ð°Ñ‚Ð°. Тук можете да зададете колко чеÑÑ‚ о иÑкате малка почивка. Една минута означава 60 Ñекунди движение на мишката или работа Ñ ÐºÐ»Ð°Ð²Ð¸Ð°Ñ‚ÑƒÑ€Ð°Ñ‚Ð°. Път до директориÑта Ñ Ð¸Ð·Ð¾Ð±Ñ€Ð°Ð¶ÐµÐ½Ð¸Ñ ÐŸÐ¾Ñледна голÑма почивка ПоÑледна малка почивка Заключване на екрана Logo and Icons Maintainer and Author Минимизиран МакÑимално неактивноÑÑ‚ Брой пропуÑнати големи почивки (неактивен) Брой пропуÑнати големи почивки (потребител) Брой пропуÑнати малки почивки (неактивноÑÑ‚) Брой пропуÑнати малки почивки (потребител) Packaging and help with related issues Пауза Пауза Процент активноÑÑ‚ ИзÑкачащ прозорец RSIBreak Съобщаване за грешка... Ðнулиране Ðнулиране на ÑтатиÑтиката Продължение на RSIBreak РекурÑивно Ñ‚ÑŠÑ€Ñене Избор на цвÑÑ‚ на броÑча. Тъй като ще Ñе поÑвÑва над изображениÑта, може би ще предпочетете цвÑÑ‚, който е видим при повечето изображениÑ. Изберете шрифт за броÑча. Изберете на прекиÑÑ‚ път за прекратÑване на почивката. Изберете Ð´Ð¸Ñ€ÐµÐºÑ‚Ð¾Ñ€Ð¸Ñ Ð¾Ñ‚ коÑто иÑкате да виждате изображениÑ. ИзображениÑта ще бъдат показвани в Ñлучаен ред по време на почивките. Ðко иÑкате, Ñ‚ÑŠÑ€Ñенето може да бъде рекурÑивно... ПропуÑкане Слайд шоу Спиране на RSIBreak СпрÑна Таймерите Ñа анулирани Това е процентът активноÑÑ‚ - Ñекунди активноÑÑ‚ ÑпрÑмо общото време на работа на RSIBreak. Това е индикатор колко добре Ñе отнаÑÑте към почивките. Това е най-дългиÑÑ‚ период на неактивноÑÑ‚ по време на работата на RSIBreak. Това е общото време големи почивки, които Ñте пропуÑнали поради неактивноÑÑ‚. Това е общото време големи почивки, които Ñте пропуÑнали. Това е общото време големи почивки. Това е общото време през което не Ñте използвали клавиатурата и мишката. Това е общото време през което Ñте използвали клавиатурата и мишката. Това е общото време малки почивки Това е общото време малки почивки, които Ñте пропуÑнали поради неактивноÑÑ‚. Това е общото време малки почивки, които Ñте пропуÑнали. Това е общото време през което е работила RSIBreak. По този начин ще можете да направите почивка Това ще анулира ÑтатиÑтиката. Това ли иÑкате? Време Таймерът за малка почивка е анулиран ОтброÑÐ²Ð°Ð½Ð¸Ñ ÐœÐ°Ð»ÐºÐ¸ почивки Малка почивка Ñлед: Малки почивки Общ брой големи почивки Общо време за малки почивки Общо запиÑано време Общо време неактивноÑÑ‚ Общо време активноÑÑ‚ Опит за предотвратÑване на хронична умора поÑредÑтвом напомнÑне на Ð¿Ð¾Ñ‚Ñ€ÐµÐ±Ð¸Ñ‚ÐµÐ»Ñ Ð´Ð° Ñи почива. СтатиÑтика на използване Добре дошли Добре дошли в RSIBreak
+
+Ð’ лентата можете да видите чаÑовник. При щракване Ñ Ð´ÐµÑен бутон върху него Ñе поÑвÑва меню от което Ñе влиза в конфигурациÑта.
+Ðко иÑкате да знаете кога ще бъде Ñледващата почивка, задръжте мишката върху иконата.
@@ -9143,201 +8902,93 @@
+изключете тази функциÑ. Когато Ñе показва изÑÐºÐ°Ñ‡Ð°Ñ‰Ð¸Ñ Ð¿Ñ€Ð¾Ð·Ð¾Ñ€ÐµÑ†,
+той може да примигва ако има активноÑÑ‚.
+Можете да го изключите, ако го намирате
-+за натрапчив. ПоÑредÑтвом тази отметка указвате дали броÑчът да Ñе вижда по време на почивките. Той ще отброÑва обратно до нула, така че ще знаете продължителноÑтта на почивката. БроÑчът ще Ñтои над изображениÑта при поÑвата им. ПоÑредÑтвом тази отметка указвате, че иÑкате прозореца да изкача при отчитане на активноÑÑ‚. ПоÑредÑтвом тази отметка указвате дали по време на почивките броÑчът да Ñе вижда. Той ще отброÑва обратно до нула, така че ще знаете продължителноÑтта на почивката. ПоÑредÑтвом тази отметка указвате, че иÑкате RSIBreak да бъде Ñтартирана при Ñтартирането на KDE. ОÑтават %1 до Ñледващата голÑма почивка ОÑтават %1 до Ñледващата почивка iglika_gardeva at yahoo.com ОÑтават %1 и %2 до Ñледващата голÑма почивка ОÑтават %1 и %2 до Ñледващата почивка Иглика Гърдева Починете Ñи %1:%2 %1:00 Една минута
++за натрапчив. ПоÑредÑтвом тази отметка указвате дали броÑчът да Ñе вижда по време на почивките. Той ще отброÑва обратно до нула, така че ще знаете продължителноÑтта на почивката. БроÑчът ще Ñтои над изображениÑта при поÑвата им. ПоÑредÑтвом тази отметка указвате, че иÑкате прозореца да изкача при отчитане на активноÑÑ‚. ПоÑредÑтвом тази отметка указвате дали по време на почивките броÑчът да Ñе вижда. Той ще отброÑва обратно до нула, така че ще знаете продължителноÑтта на почивката. ПоÑредÑтвом тази отметка указвате, че иÑкате RSIBreak да бъде Ñтартирана при Ñтартирането на KDE. ПоÑредÑтвом тази отметка показвате, че иÑкате да видите кога таймерите Ñа анулирани. Така Ñтава когато Ñте неактивни за извеÑтно време. ПоÑредÑтвом тази отметка показвате, че иÑкате да бъде използвано заÑичане на неактивноÑÑ‚. Ðко не е включена, RSIBreak нÑма да анулира таймерите когато Ñте неактивни по време на почивка, но ще отчете за ÑтатиÑтиката Ñекундите през които работите/Ñте неактивни. Вие използвате KDE 3.3 или по-Ñтара верÑиÑ. Ð’ тази верÑÐ¸Ñ Ð½Ðµ можете да променÑте Ð¿Ñ€ÐµÐºÐ¸Ñ Ð¿ÑŠÑ‚. %1 и %2 %1 и %2 iglika_gardeva at yahoo.com Иглика Гърдева Починете Ñи минути Ñекунди %1:%2 %1:00 Един чаÑ
++%n чаÑа Една минута
+%n минути Една Ñекунда
+%n Ñекунди МолÑ, починете Ñи за Ñекунда
-+МолÑ, починете Ñи %n Ñекунди минути Ñекунди
-\ Kein Zeilenumbruch am Dateiende.
---- po/br/Makefile.in
-+++ po/br/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/br/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/br/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/br/Makefile
-+#>- $(AUTOMAKE) --foreign po/br/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/br/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/br/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/br/Makefile
-+ $(AUTOMAKE) --foreign po/br/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/br/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/br/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/br/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/br/Makefile
-+ $(AUTOMAKE) --foreign po/br/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/br/Makefile.in
-
-
++МолÑ, починете Ñи %n Ñекунди минута
++%n минути една минута
++%n минути една Ñекунда
++%n Ñекунди Ñекунда
++%n Ñекунди
+\ No newline at end of file
--- po/br/rsibreak.gmo
+++ po/br/rsibreak.gmo
-@@ -0,0 +1,14 @@
-+Þ• Ü % œ 0 1
-+ E P X
-+ _ j t ƒ Š ’ š « ± Ã Í
Ö ä é ó # û ! A I U Q §
 РØ
ä ò ) 1 C K a i ! r
” ¢ » 0 Ã ! ô
-+ &Change Shortcut... &Change... &Color: &Font: &Shortcut: About KDE About RSIBreak Author C&ustom General General Settings H&ide Image Folder Path Maximized RSIBreak Report Bug... Skip Slideshow Welcome _: EMAIL OF TRANSLATORS
+@@ -0,0 +1,34 @@
++Þ• ( \ 5 œ p q
++ … ˜
++ Ÿ ª ´ ¾ Í Ô Ü ä õ û
2 < B
K Y _ t y ƒ ˆ B D Ó # ! < c ^ c  & < V p ƒ · U Ê
; I Q
] k t ƒ — Ÿ « ³ Å Í ã ö
++ ! B K
a o ˆ Œ ” 0 ¦ ! × ù
++
++
++
++ #
++ ,
++ 5
++ ?
++
++ % ! # ( " $ &
' &Change Shortcut... &Change... &Color: &Font: &Shortcut: 0 seconds About KDE About RSIBreak Author C&ustom General General Settings H&ide Image Folder Path Logo and Icons Maintainer and Author Maximized Pause RSIBreak Report Bug... Reset Reset the statistics Skip Slideshow Time Welcome _: Arguments: hours, minutes both as you defined earlier
++%1 and %2 _: Arguments: minutes, seconds both as you defined earlier
++%1 and %2 _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
-+Your names minutes seconds Project-Id-Version: ../../br/messages//playground-utils/rsibreak.po
-+POT-Creation-Date: 2006-02-20 11:19+0100
++Your names _: Translate this as the longest plural form. This is used to calculate the width of window
++minutes _: Translate this as the longest plural form. This is used to calculate the width of window
++seconds _n: One hour
++%n hours _n: One minute
++%n minutes _n: One second
++%n seconds _n: minute
++minutes _n: one minute
++%n minutes _n: one second
++%n seconds _n: second
++seconds Project-Id-Version: ../../br/messages//playground-utils/rsibreak.po
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2004-09-20 15:44+0200
+Last-Translator: Thierry Vignaud <tvignaud at mandrakesoft.com>
+Language-Team: br <kde-i18n-doc at kde.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+ &Kemmañ ar berradenn ... &Kemmañ ... &Liv : &Nodrezh : &Berradenn : Diwar-benn KDE Diwar-benn RSIBreak Oberour &Diouzhoc'h Pennañ Dibarzhoù hollek K&uzhat Hent renkell skeudenn Uhelaet RSIBreak Reiñ da c'houzout ur gudenn ... Tremen e-biou Diskouezadur skeudennoù Degemer tvignaud at mandriva.com, jdrapier at club-internet.fr Thierry Vignaud, Jañ-Mai Drapier munutoù eilennoù
-\ Kein Zeilenumbruch am Dateiende.
---- po/ca/Makefile.in
-+++ po/ca/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ca/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ca/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/ca/Makefile
-+#>- $(AUTOMAKE) --foreign po/ca/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ca/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ca/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/ca/Makefile
-+ $(AUTOMAKE) --foreign po/ca/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/ca/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ca/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ca/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/ca/Makefile
-+ $(AUTOMAKE) --foreign po/ca/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/ca/Makefile.in
-
-
++ &Kemmañ ar berradenn ... &Kemmañ ... &Liv : &Nodrezh : &Berradenn : 0 eilenn Diwar-benn KDE Diwar-benn RSIBreak Oberour &Diouzhoc'h Pennañ Dibarzhoù hollek K&uzhat Hent renkell skeudenn Logo hag arlunioù Ratreer hag oberour Uhelaet Ehan RSIBreak Reiñ da c'houzout ur gudenn ... Adkorañ Adkorañ ar stadegoù Tremen e-biou Diskouezadur skeudennoù Eur Degemer %1 ha %2 %1 ha %2 tvignaud at mandriva.com, jdrapier at club-internet.fr Thierry Vignaud, Jañ-Mai Drapier munutoù eilennoù %n eur %n munut %n eil munutoù %n munut %n eilenn eilennoù
+\ No newline at end of file
--- po/ca/rsibreak.gmo
+++ po/ca/rsibreak.gmo
-@@ -0,0 +1,47 @@
-+Þ• 3 ´ G L h ( i
-+ ’ ¥ ¬ ¶ Å
-+ Ì × è ð # 6 > O U b q ‡ & ‘ ¸ ¾
Ç Õ Ú ä õ ÿ D % j ý r T p ^ Å _ $ # „ p ¨ q ! ‹ > ì
-+
-+ 8
-+ 9 R
-+ Œ
-+ ”
-+ C œ
-+ à
-+ ' 8 > N d l … › ¥ µ Ê Ò è ù
-+
/
G
P
Y
m
s
‡
˜
¦
·
S Ï
# - Z H % £ & É
ð * þ + ) U g z € † ™ ; ¬ è ï , . 2 - 3 ) &
-+ " ( % $ ! / 1 '
# * 0 + &Automatically start RSIBreak at startup &Change... &Color: &Font: About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Skip Slideshow Suspend RSIBreak Suspended Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+@@ -0,0 +1,52 @@
++Þ• - „ = ì à ( á
++
++ $ . =
++ D O ` h } “ › ® ¶ Ç Í Ú é ÿ & 0 6
? M R \ m w ‹ D â ý ê T è # = ! a > ƒ Â Û ô 9 ( C b ¦
++ Ç Ò Ú á í þ
++
++ *
++ 2
++ K
++ a
++ k
++ s
++ {
++
++ ˜
++ ®
++ ¿
++
++ Ò
++ / Ý
++
3 9 M ^ f l } S • é ó Z
i
w
‰
œ
¢
¨
»
; Î
+ ) ! # *
++ , ( % - ' $ & " &Automatically start RSIBreak at startup &Change... &Color: &Font: About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Skip Slideshow Suspend RSIBreak Suspended Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
+
-+Use RSIBreak wisely. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
++Use RSIBreak wisely. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
+Take a break now _: minutes:seconds
+%1:%2 _: minutes:seconds
+%1:00 _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
++Please relax for %n seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2006-02-18 17:26+0100
+Last-Translator: Albert Astals Cid <aacid at kde.org>
+Language-Team: Catalan <kde-i18n-ca at kde.org>
@@ -9350,100 +9001,31 @@
+A la safata de sistema podeu veure ara un rellotge. Quan cliqueu amb el botó dret sobre ell veureu un menú des del quant podeu anar a la configuració.
+Quant vulgueu saber quan serà el proper descans poseu el cursor sobre la icona.
+
-+Useu RSIBreak sabiament. Amb aquesta opció podeu indicar que voleu iniciar RSIBreak cada cop que s'iniciï el KDE. Queden %1 fins al proper descans gran Queden %1 fins al proper descans petit aacid at kde.org Queden %1 i %2 fins al proper descans gran Queden %1 i %2 fins al proper descans petit Albert Astals Cid Vull descansar ara %1:%2 %1:00 Un minut
++Useu RSIBreak sabiament. Amb aquesta opció podeu indicar que voleu iniciar RSIBreak cada cop que s'iniciï el KDE. aacid at kde.org Albert Astals Cid Vull descansar ara %1:%2 %1:00 Un minut
+%n minuts Un segon
+%n segons Si us plau descanseu 1 segon
-+Si us plau descanseu %n segons minuts segons
-\ Kein Zeilenumbruch am Dateiende.
---- po/da/Makefile.in
-+++ po/da/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/da/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/da/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/da/Makefile
-+#>- $(AUTOMAKE) --foreign po/da/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/da/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/da/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/da/Makefile
-+ $(AUTOMAKE) --foreign po/da/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/da/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/da/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/da/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/da/Makefile
-+ $(AUTOMAKE) --foreign po/da/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/da/Makefile.in
-
-
++Si us plau descanseu %n segons
+\ No newline at end of file
--- po/da/rsibreak.gmo
+++ po/da/rsibreak.gmo
-@@ -0,0 +1,72 @@
-+Þ• J l e ¼ P ( Q z
-+ Ž ™ ¡ » Î
-+ Õ à
ï ý
-+ ( 9 A ÿ V c V [ º , 4 G O ` f x Š — ¦ ¼ & Æ í ó
ü
+@@ -0,0 +1,82 @@
++Þ• ~ ü °
++ ! ±
++ " Ó
++ ( ö
++
++ 3 > F ` s & z
++ ¡ ¬ È ×
á ï ù
++
++ + 6 > ÿ S c S
[ ·
) 1 D L ] c Z u + Ð , ü ) © + = L \ i x Ž ˜ # ¬ # Ð $ ô $ & > e k w Ž ”
« ± Æ Ö é , Š 7 · – ï † ‹ • ¦ ° f Ï ; 6 L r P ¿ 9 ' J G r @ º ' û Q # : u + ° ! Ü > þ = + B n v ‚ ” » × ë D ] n ý v Ù t { N Õ Ê ^ Ÿ ÿ T Ÿ ô Ý v [ T B ° D ó # 8 ! \ > ~ c ½ c ! … ž · Í ç 9 ! ;! N! h! ‚! D •! # Ú" # þ" # "# F# W# a# % i# # ¤# $ ±# Ö# ã# þ#
++ $ !$ 1$ 8$ D$ N$ [$ m$ z$ ‹$ ! $ r Â% g 5& & ±& ¹& É& Ò& ê& ñ& U ' 2 Y' 2 Œ' ˆ ¿' ‰ H( Ò( ë( þ( ) ) 1)
++ L) W) . p) - Ÿ) . Í) - ü) & ** Q* W* d* |* Ž* —* * µ* Ç* Ù* Ÿ è* ( ˆ+ 5 ±+ w ç+ _,
k, y, , ™, v ³, = *- Q h- U º- 6 . # G. B k. < ®. + ë. P / 6 h/ . Ÿ/ ( Î/ 8 ÷/ 00 , 40 a0 g0 t0 †0 “0 ²0 Ñ0 ç0 1 N 1 g1 v1 ö €1 ð w2 ‹ h3 À ô3 s µ4 )5 ` ·5 ƒ 6 œ6 X °7 8 8 8 /8 C8 T8 ]8 f8 l8 r8 ƒ8 ˜8 ( ®8 ×8 æ8 û8 9 ! D : 1 3 k n z w j N c . R o ] q 6 J 9 K ^ & d < F Q M - Z ' ) \ s y
++ $ A 4 x L H } f E l p b a % u 0 + [ " / ~ , _ 5 P X ? { Y U ` B @ S G ( i * 8 r | h e I ; = T 7 C > t g 2 O V W v m #
%1 remaining until next big break %1 remaining until next tiny break &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Reset timers after period of idleness &Shortcut: &Show when timers are reset &Use the popup 0 seconds Abort a break About KDE About RSIBreak Author Big Breaks Big break every: Big breaks C&ustom Change images every: Changes in RSIBreak 0.5.0
+
-+
-+ -
-+ , Î
-+ 7 û
-+ – 3 Ê Ï Ù ê ! ô * D < ý ‰ Ù ‡
{ a Õ Ý ^ ³ Ÿ T ² ^ _ f # Æ p ê q [ ! Í > ï . G ` z 9 ” Î Ö D Þ # # G X b % j ¥ ² ¿ × ç î ú # 4 ! I r k g Þ F Z b r { “ š ¬ Å Ò å
-+ & 2 D M c u Ÿ „ ( $ 5 M w ƒ û
) ( 5 ^ d q H ƒ Ì ö Ö ð Í ‹ ¾ À J s `
' n ' – ¾ - Ò - ! .! B! S! Y! _! t! ( Š! ³! ¼! 6 B & ) @ > C 1 E ? + 0 : 9 7 A . J 5 (
-+ " H G / I = < % - ! 2
D # ; F $ 4 * 8 , ' 3 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Changes in RSIBreak 0.5.0
-+
+In this version we have changed the way the timers work. Instead of indicating after how many tiny breaks you want a big break, you can now setup after how many minutes you want a bigbreak.
+Please review your current settings.
+
-+ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Here you can set how long one image should be shown before it is replaced by the next one. Here you can set how long the big break is. Here you can set how long the tiny break is. Here you can set how often you want a big break. One minute means 60 seconds of movement with the mouse or work on the keyboard Here you can set how often you want a tiny break. One minute means 60 seconds of movement with the mouse or work on the keyboard. Image Folder Path Last big break Last tiny break Lock desktop Logo and Icons Maintainer and Author Maximized Maximum idle period Number of skipped big breaks (idle) Number of skipped big breaks (user) Number of skipped tiny breaks (idle) Number of skipped tiny breaks (user) Packaging and help with related issues Pause Pause score Percentage of activity Popup RSIBreak Report Bug... Reset Reset the statistics Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended The timers have now been reset This is a percentage of activity, based on the seconds of activity vs. total time RSIBreak is running. This is an indication how well you bahaved with the brakes. This is the biggest period of inactivity measured while RSIBreak is running. This is the total amount of big breaks which are skipped because you where idle. This is the total amount of big breaks which you skipped. This is the total amount of big breaks. This is the total amount of time you did not use the keyboard or mouse. This is the total amount of time you used the keyboard or mouse. This is the total amount of tiny breaks This is the total amount of tiny breaks which are skipped because you where idle. This is the total amount of tiny breaks which you skipped. This is the total time RSIBreak is running. This way you can have a break now This will reset all statistics to zero. Is that what you want? Time Timer for the tiny break has now been reset Timings Tiny Breaks Tiny break every: Tiny breaks Total amount of big breaks Total amount of tiny breaks Total recorded time Total time being idle Total time of activity Try to prevent Repetitive Strain Injury by reminding a user to rest. Usage Statistics Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -9456,33 +9038,38 @@
+turn this function off. When the popup is shown, it can flash
+when there is activity detected. You
+can turn it off when you find it too
-+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. With this checkbox you indicate that you want to see when the timers are reset. This happens when you have been idle for a while. With this checkbox you indicate that you want to use idle detection. Unchecked RSIBreak will not reset the timers when you are idle for the duration of a break, but it will take into account the seconds you work/are idle. You are using KDE 3.3 or older, with this version of KDE, you can not change this shortcut. _: Arguments: hours, minutes both as you defined earlier
++%1 and %2 _: Arguments: minutes, seconds both as you defined earlier
++%1 and %2 _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
-+Take a break now _: minutes:seconds
++Take a break now _: Translate this as the longest plural form. This is used to calculate the width of window
++minutes _: Translate this as the longest plural form. This is used to calculate the width of window
++seconds _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: One minute
++%1:00 _n: One hour
++%n hours _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
-+PO-Revision-Date: 2006-02-20 21:24+0100
++Please relax for %n seconds _n: minute
++minutes _n: one minute
++%n minutes _n: one second
++%n seconds _n: second
++seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
++PO-Revision-Date: 2006-03-28 20:52-0500
+Last-Translator: Erik Kjær Pedersen <erik at binghamton.edu>
+Language-Team: Danish <dansk at klid.dk>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.11.1
-+ Kør &automatisk RSIbreak ved start Æ&ndr genvej... Æ&ndr... &Farve: &Deaktivér genvejstast for at skippe &Blink ved aktivitet &Skrifttype: &Hurtigtast: &Brug meddelelsesvindue Afbryd en pause Om KDE Om RSIbreak Forfatter Lange pauser Lang hvile efter: &Brugerdefineret Ændr billeder hver: Ændringer i RSIbreak 0.5.0
++ %1 tilbage inden næste lange pause %1 tilbage inden næste korte pause Kør &automatisk RSIbreak ved start Æ&ndr genvej... Æ&ndr... &Farve: &Deaktivér genvejstast for at skippe &Blink ved aktivitet &Skrifttype: &Nulstil tid efter periode i tomgang &Hurtigtast: Vi&s når tider nulstilles &Brug meddelelsesvindue 0 sekunder Afbryd en pause Om KDE Om RSIbreak Forfatter Lange pauser Lang pause efter: Lange pauser &Brugerdefineret Ændr billeder hver: Ændringer i RSIbreak 0.5.0
+
-+Måden som tidtagning virker er ændret i denne version. I stedet for at angive efter hvor mange korte hviler du vil have en lang hvile, kan du nu indstille efter hvor mange minutter du vil have en lang hvile.
++Måden som tidtagning virker er ændret i denne version. I stedet for at angive efter hvor mange korte pauser du vil have en lang pause, kan du nu indstille efter hvor mange minutter du vil have en lang pause.
+Gennemse venligst dine nuværende indstillinger.
+
-+ Markér dette for at deaktivere og skjule skippeknappen. På den måde kan du forhindre at en pause springes over. Markér dette for at deaktivere skippegenvejen. På den måde kan du forhindre at pausen springes over. Indstil RSIbreak... Tæller I så lang tid: Generelt Generelle indstillinger S&kjul Skjul skippe&knap Søgesti til billedmappe Lås desktop Logotype og ikoner Vedligeholder og forfatter Maksimeret Pakning og hjælp med beslægtede ting Meddelelsesvindue RSIbreak Rapportér problem... Genoptag RSIbreak Søg rekursivt Vælg farven at bruge for tælleren. Eftersom den bruges ovenpå billederne, kan du villa indstille den til en farve som er synlig med de fleste af billederne. Vælg skrifttype at bruge for tælleren. Vælg genvejstasten at bruge for at afbryde pauserne. Vælg mappen du vil se billeder fra. Billederne vises tilfældigt i pauserne. Den gennemsøges rekursivt hvis du vil... Spring over Lysbilledshow Suspendér RSIbreak Suspenderet På denne måde kan du holde en pause nu Tider Korte pauser Kort hvile efter: Forsøg at forhindre belastningsskader ved at minde brugere om at hvile. Velkommen Velkommen til RSIbreak
++ Markér dette for at deaktivere og skjule skippeknappen. På den måde kan du forhindre at en pause springes over. Markér dette for at deaktivere skippegenvejen. På den måde kan du forhindre at pausen springes over. Indstil RSIbreak... Tæller I så lang tid: Generelt Generelle indstillinger S&kjul Skjul skippe&knap Her kan du indstille hvor længe et billede skal vises inden det erstattes af næste. Her kan du indstille hvor lang den lange pause er. Her kan du indstille hvor lang den korte pause er. Her kan du indstille hvor ofte du vil have en lang pause. Et minut betyder 60 sekunders bevægelse af musen eller arbejde med tastaturet Her kan du indstille hvor ofte du vil have en kort pause. Et minut betyder 60 sekunders bevægelse af musen eller arbejde med tastaturet. Søgesti til billedmappe Seneste lange hvil Seneste korte hvil Lås desktop Logotype og ikoner Vedligeholder og forfatter Maksimeret Maksimal tomgangsperiode Antal oversprungne lange hvilepauser (tomgang) Antal oversprungne lange hvilepauser (bruger) Antal oversprungne korte hvilepauser (tomgang) Antal oversprungne korte hvilepauser (bruger) Pakning og hjælp med beslægtede ting Pause Pausescoring Aktivitetens procenttal Meddelelsesvindue RSIbreak Rapportér problem... Nulstil Nulstil statistik Genoptag RSIbreak Søg rekursivt Vælg farven at bruge for tælleren. Eftersom den bruges ovenpå billederne, kan du villa indstille den til en farve som er synlig med de fleste af billederne. Vælg skrifttype at bruge for tælleren. Vælg genvejstasten at bruge for at afbryde pauserne. Vælg mappen du vil se billeder fra. Billederne vises tilfældigt i pauserne. Den gennemsøges rekursivt hvis du vil... Spring over Lysbilledshow Suspendér RSIbreak Suspenderet Tiderne har nu nulstillet Dette er procentuel aktivitet, baseret på antal sekunders aktivitet i forhold til den totale tid som RSIbreak kørte. Dette er en indikation på hvor godt du håndterede pauserne. Dette er den længste periode uden aktivitet som måltes op mens RSIbreak kørte. Dette er det totale antal lange pauser som blev sprunget over fordi du var i tomgang. Dette er totalt antal lange pauser som du sprang over. Dette er totalt antal lange pauser. Dette er den totale tid som du ikke brugte tastaturet eller musen. Dette er den totale tid som du brugt tastaturet eller musen. Dette er det totale antal korte hvilepauser Dette er det totale antal korte pauser som sprunget over fordi du var i tomgang. Dette er totalt antal korte pauser som du sprang over. Dette er den totale tid som RSIbreak er kørt. På denne måde kan du holde en pause nu Dette nulstiller al statistik. Er det hvad du vil gøre? Tid Tiden for korte hvilepauser er nu nulstillet Tider Korte pauser Kort pause efter: Korte pauser Totalt antal lange hvilepauser Totalt antal korte hvilepauser Total registreret tid Total tid uden aktivitet Total tid med aktivitet Forsøg at forhindre belastningsskader ved at minde brugere om at holde pause. Brugsstatistik Velkommen Velkommen til RSIbreak
+
+Du ser nu et ur i statusfeltet. Når du højreklikker på det ser du en menu hvor du for eksempel kan vise indstillingerne.
+Hvis du vil vide hvornår næste pause er, så hold musen over ikonen.
@@ -9495,90 +9082,25 @@
+funktion. NÃ¥r meddelelsevinduet vises kan det
+blinke når aktivitet detekteres. Du kan
+lukke af for dette hvis du synes at det er
-+for påtrængende. Du kan angive om du vil se en tæller i pauserne med dette afkrydsningsfelt. Den tæller ned til nul, så du véd hvor lang pausen vil være. Den vises ovenpå billederne, når billeder vises. Du kan angive om du ønsker at meddelelsevinduet skal blinke når aktivitet indtræffer med dette afkrydsningsfelt. Du kan angive om du vil se et meddelelsevindue når det er tid til en pause. Den tæller ned til nul, så du véd hvor lang pausen vil blive. Du kan angive at du ønsker at RSIbreak skal køres når KDE startes med dette afkrydsningsfelt. %1 er tilbage indtil næste lange hvile %1 er tilbage indtil næste korte hvile erik at binghamton.edu %1 og %2 er tilbage indtil næste lange hvile %1 og %2 er tilbage indtil næste korte hvile Erik Kjær Pedersen Hold en pause nu %1:%2 %1:00 Et minut
++for påtrængende. Du kan angive om du vil se en tæller i pauserne med dette afkrydsningsfelt. Den tæller ned til nul, så du véd hvor lang pausen vil være. Den vises ovenpå billederne, når billeder vises. Du kan angive om du ønsker at meddelelsevinduet skal blinke når aktivitet indtræffer med dette afkrydsningsfelt. Du kan angive om du vil se et meddelelsevindue når det er tid til en pause. Den tæller ned til nul, så du véd hvor lang pausen vil blive. Du kan angive at du ønsker at RSIbreak skal køres når KDE startes med dette afkrydsningsfelt. Du kan angive om du vil se når tiderne nulstilles med dette afkrydsningsfelt. Det indtræffer når du har været inaktiv en stund. Du kan angive at du ønsker at RSIbreak skal bruge detektering af inaktivitet med dette afkrydsningsfelt. Hvis afkrydsningsfeltet ikke er markeret, nulstiller RSIbreak ikke tiden når du er i tomgang i en hel pause, men sekunderne du arbejder eller er ledig tages hensyn til. Du bruger KDE 3.3 eller tidligere. Med denne version af KDE kan du ikke ændre genvejen. %1 og %2 %1 og %2 erik at binghamton.edu Erik Kjær Pedersen Hold en pause nu minutter sekunder %1:%2 %1:00 En time
++%n timer Et minut
+%n minutter Et sekund
+%n sekunder Slap af i 1 sekund
-+Slap af i %n sekunder minutter sekunder
-\ Kein Zeilenumbruch am Dateiende.
---- po/el/Makefile.in
-+++ po/el/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/el/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/el/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/el/Makefile
-+#>- $(AUTOMAKE) --foreign po/el/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/el/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/el/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/el/Makefile
-+ $(AUTOMAKE) --foreign po/el/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/el/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/el/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/el/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/el/Makefile
-+ $(AUTOMAKE) --foreign po/el/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/el/Makefile.in
-
-
++Slap af i %n sekunder minut
++minutter et minut
++%n minutter et sekund
++%n sekunder sekund
++sekunder
+\ No newline at end of file
--- po/el/rsibreak.gmo
+++ po/el/rsibreak.gmo
-@@ -0,0 +1,15 @@
-+Þ• ” h
-+ i t | ƒ ‹ “ › ¬
² À # È ! ì K j { ˆ ¥ Á Ò ! ß $ 8 P f
-+ † ‘
-+ &Change... &Color: &Font: C&ustom Counter General General Settings H&ide Report Bug... Welcome _: EMAIL OF TRANSLATORS
+@@ -0,0 +1,14 @@
++Þ•
„ ì 0
++ 1 < D K S [ c t
z ˆ # ! ´ K Ö " 3 @ ] y Š ! — ¹ $ Ë ð
++
&Change... &Color: &Font: C&ustom Counter General General Settings H&ide Report Bug... Welcome _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
-+Your names minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
++Your names Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2005-10-03 13:16+0300
+Last-Translator: Spiros Georgaras <sngeorgaras at otenet.gr>
+Language-Team: Greek <i18ngr at lists.hellug.gr>
@@ -9586,90 +9108,20 @@
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.10.2
-+ Αλλα&γή... &ΧÏώμα: Γ&ÏαμματοσειÏά: &Î ÏοσαÏμοσμÎνο ΜετÏητής Γενικά ΓενικÎÏ‚ Ïυθμίσεις Α&πόκÏυψη ΑναφοÏά σφάλματος... Καλώς ήλθατε sngeorgaras at otenet.gr ΣπÏÏος ΓεωÏγαÏάς λεπτά δευτεÏόλεπτα
-\ Kein Zeilenumbruch am Dateiende.
---- po/en_GB/Makefile.in
-+++ po/en_GB/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/en_GB/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/en_GB/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/en_GB/Makefile
-+#>- $(AUTOMAKE) --foreign po/en_GB/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/en_GB/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/en_GB/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/en_GB/Makefile
-+ $(AUTOMAKE) --foreign po/en_GB/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/en_GB/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/en_GB/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/en_GB/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/en_GB/Makefile
-+ $(AUTOMAKE) --foreign po/en_GB/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/en_GB/Makefile.in
-
-
++ Αλλα&γή... &ΧÏώμα: Γ&ÏαμματοσειÏά: &Î ÏοσαÏμοσμÎνο ΜετÏητής Γενικά ΓενικÎÏ‚ Ïυθμίσεις Α&πόκÏυψη ΑναφοÏά σφάλματος... Καλώς ήλθατε sngeorgaras at otenet.gr ΣπÏÏος ΓεωÏγαÏάς
+\ No newline at end of file
--- po/en_GB/rsibreak.gmo
+++ po/en_GB/rsibreak.gmo
-@@ -0,0 +1,50 @@
-+Þ• 6 Ì I | ( ¡ Ê
-+ Þ é ñ
-+
% 3 =
-+ L W _ t Š ’ š « ± Ã Ð ß & é
- = P , ñ 7 V ` q ! { ¥ D ± ö ý þ Ù ü { Ö Õ R
-+ ^ ( Ÿ ‡ T ' # | ! > Â 9
;
C
S K
( Ÿ È
-+ Ü ç ð
-+
-+
$ 2 <
-+ K V ^ s ‰ ‘ ™ ª ° Â Ï Þ & è
, < ¢ O , ò 7 W a r ! | ž ¦ D ² ÷ ý ÿ Ù ý { × Ô S ] ( ž † S % y ’ ¡ 5 ² è ð ( $ / ' & 2 4 + % - 1
# 6 5 . "
-+ * 3 ! , 0 ) &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+@@ -0,0 +1,49 @@
++Þ• 4 ¼ G \ x ( y ¢
++ ¶ Á É Ü
++ ã î
ý
++ $ / 7 L b j r ƒ ‰ › ¨ · & Á è î
÷ ( , É 7 ö . 8 I ! S u } D ‰ Î ý Ö Ù Ô { ® Õ *
++ ^ Ÿ _ T ÿ # T ! x > š 9 Ù S
( g
++ ¤ ¯ ¸ Ë
++ Ò Ý
ì ú
++ & ; Q Y a r x Š — ¦ & ° × Ý
æ ô ¢ , º 7 ç ) : ! D f n D z ¿ ý Ç Ù Å { Ÿ Ô ] ð ž N S í A Z i 5 z / % $ , & . + # ) ( 1 0 * 4 3 " - ' !
++
2 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -9686,8 +9138,8 @@
+Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
+Take a break now _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
++Please relax for %n seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2005-12-11 22:48+0000
+Last-Translator: Malcolm Hunter <malcolm.hunter at gmx.co.uk>
+Language-Team: British English <kde-en-gb at kde.me.uk>
@@ -9709,90 +9161,32 @@
+when there is activity detected. You
+can turn it off when you find it too
+intrusive. With this tickbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this tickbox you can indicate if you want to see the popup flash when there is activity. With this tickbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this tickbox you can indicate that you want RSIBreak to start when KDE starts. malcolm.hunter at gmx.co.uk Malcolm Hunter Take a break now Please relax for 1 second
-+Please relax for %n seconds minutes seconds
-\ Kein Zeilenumbruch am Dateiende.
---- po/es/Makefile.in
-+++ po/es/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/es/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/es/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/es/Makefile
-+#>- $(AUTOMAKE) --foreign po/es/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/es/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/es/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/es/Makefile
-+ $(AUTOMAKE) --foreign po/es/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/es/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/es/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/es/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/es/Makefile
-+ $(AUTOMAKE) --foreign po/es/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/es/Makefile.in
-
-
++Please relax for %n seconds
+\ No newline at end of file
--- po/es/rsibreak.gmo
+++ po/es/rsibreak.gmo
-@@ -0,0 +1,54 @@
-+Þ• < ü S Ü ( ( ) R
-+ f q y Œ
-+ “ ž
» Å
-+ Ô ß ç ü - 5 F L ^ k z & „ « ±
º È Ø ë , Œ 7 ¹ – ñ ˆ ’ £ ! Ï × D ã ( ý 0 Ù .
-+ { Õ „ ^ Z Ÿ ¹ T Y
# ®
! Ò
> ô
3 L e 9 ™ Ó Û 8 ã . K f r z – ž ¯ Ã
Þ ì ÿ
7 N W n v – ¶ Ê
-+ Ü . ç ) > Q « g 7 G K ² “ F U
-+ h / s £ ° [ Ä
-+ ' + S ƒ b õ æ l Ü ¦ I í ð Þ ó ( . 4 I O ` ° ¸ 2 3 5 7 0 # $ 8 / ' ) . ( + 1 * 6 :
-+ ; 9 < ! " % & , - 4 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+@@ -0,0 +1,70 @@
++Þ• D < a \ à ( á
++
++ ) 1 K ^
++ e p
— ¦
++ ¸ É Ñ ÿ æ c æ [ J ¦ ¼ Ä × ß ð ö ' 6 L & V } ƒ
Œ š ª ½ , ^
++ 7 ‹
++ – Ã
++ Z _ i z ! „ ¦ ® º D Ì ý Ù
{ ñ
Õ m ^ C Ÿ ¢ T B # — ! » > Ý 5 N h 9 ‚ : ¼ . ÷ & A M ) U › £ ´ È
ã ñ
++
4 B % Z p € k ñ ] t } ” œ ³ ¼ Ö ö
++
++ / . : i s | ‘ ¤ « º 7 f G ž ² æ ™ ¯
++ Â / Í ý
++ [ 8
++ ” ' Ÿ Ç ƒ Ö õ Z l P ¦ ½ í d R g ‚ œ ¢ ¨ ½ O Ô 5 - 2 " 6 4 + ! ' = / $ 0 ,
++ ( D % & . @
# C > 9 8 B < ; 1 3 ? A * 7 : ) &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Changes in RSIBreak 0.5.0
+
++In this version we have changed the way the timers work. Instead of indicating after how many tiny breaks you want a big break, you can now setup after how many minutes you want a bigbreak.
++Please review your current settings.
++
++ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
+
@@ -9812,17 +9206,22 @@
+%1:00 _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
-+PO-Revision-Date: 2005-12-26 00:42+0100
++Please relax for %n seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
++PO-Revision-Date: 2006-02-22 23:43+0100
+Last-Translator: santi <santi at est.unileon.es>
+Language-Team: Español <kde-es at kybs.de>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+X-Generator: KBabel 1.11
-+ &Arrancar RSIBreak automáticamente al iniciar &Cambiar acceso rápido... &Cambiar... &Color: &Parpadear si hay actividad &Letra: Acce&so rápido: &Utilizar emergente Cancelar una interrupción Acerca de KDE Acerca de RSIBreak Descansos grandes &Personalizar Cambiar imágenes cada: Configurar RSIBreak... Contador Para una duración de: General Preferencias generales O&cultar Ruta de la carpeta de imágenes Bloquear escritorio Logotipo e iconos Maximizado Empaquetado y ayuda con los temas relacionados Emergente RSIBreak Informar de fallo... Reiniciar RSIBreak Buscar recursivamente Seleccione el color a utilizar en el contador. Como se usa en la parte superior de las imágenes, querrá seleccionar un color visible para la mayor parte de las imágenes Seleccione el tipo de letra a utilizar con el contador. Seleccione el acceso rápido a utilizar para cancelar la interrupción. Seleccione la carpeta de la que desee ver las imágenes. Estas imágenes se muestran de forma aleatoria durante el descanso. Realizará la búsqueda recursiva si asà lo desea... Presentaciones Suspender RSIBreak Suspendido De esta forma se podrá tomar un descanso ahora Cronometrado Descansos pequeños Intenta evitar las lesiones por movimientos repetitivos recordando al usuario que descanse. Bienvenido Bienvenido a RSIBreak
++X-Generator: KBabel 1.11.2
++ &Arrancar RSIBreak automáticamente al iniciar &Cambiar acceso rápido... &Cambiar... &Color: &Desactivar el acceso rápido para saltar &Parpadear si hay actividad &Letra: Acce&so rápido: &Utilizar emergente Cancelar una interrupción Acerca de KDE Acerca de RSIBreak Autor Descansos grandes Descansos grandes cada: &Personalizar Cambiar imágenes cada: Cambios en RSIBreak 0.5.0
+
++En esta versión hemos cambiado la forma en que funcionan los cronómetros. En lugar de indicar después de cuántos descansos pequeños hará uno grande, puede configurar el tiempo que restante hasta el descanso grande.
++Por favor revise sus preferencias actuales.
++
++ Marque esta opción para desactivar y ocultar el botón saltar. De esta forma puede evitar saltarse el descanso. Marque esta opción para desactivar el botón para saltar. De esta forma puede evitar saltarse el descanso. Configurar RSIBreak... Contador Para una duración de: General Preferencias generales O&cultar Ocultar el botón &saltar Ruta de la carpeta de imágenes Bloquear escritorio Logotipo e iconos Mantenedor y autor Maximizado Empaquetado y ayuda con los temas relacionados Emergente RSIBreak Informar de fallo... Reiniciar RSIBreak Buscar recursivamente Seleccione el color a utilizar en el contador. Como se usa en la parte superior de las imágenes, querrá seleccionar un color visible para la mayor parte de las imágenes Seleccione el tipo de letra a utilizar con el contador. Seleccione el acceso rápido a utilizar para cancelar la interrupción. Seleccione la carpeta de la que desee ver las imágenes. Estas imágenes se muestran de forma aleatoria durante el descanso. Realizará la búsqueda recursiva si asà lo desea... Saltar Presentaciones Suspender RSIBreak Suspendido De esta forma se podrá tomar un descanso ahora Cronometrado Descansos pequeños Descansos pequeños cada: Intenta evitar las lesiones por movimientos repetitivos recordando al usuario que descanse. Bienvenido Bienvenido a RSIBreak
++
+En su bandeja del sistema puede ver un reloj. Cuando pulse con el botón derecho podrá ver un menú, desde el que podrá ir a la configuración, por ejemplo.
+Cuando quiera saber cuándo toca el siguiente descanso, sitúese sobre el icono.
+
@@ -9836,107 +9235,62 @@
+cuando la encuentre demasiado intrusiva. Con esta casilla puede indicar si desea ver un contador durante las interrupciones. Contará hacia atrás hasta cero, de forma que sepa cuánto tiempo durará la pausa. Se mostrará en la parte superior de la imagen, cuando se muestran imágenes Con esta casilla puede indicar si desea que RSIBreak muestre un mensaje parpadeante cuando exista actividad. Con esta casilla puede indicar si desea ver un mensaje emergente durante los descansos. Comenzará a contar hasta cero, de forma que sabrá la duración del descanso. Con esta casilla puede indicar que desea que RSIBreak se inicie al iniciar KDE.Con esta casilla puede indicar que desea que RSIBreak se inicie al iniciar KDE.Con esta casilla puede indicar que desea que RSIBreak se inicie al iniciar KDE. santi at est.unileon.es Santiago Fernández Sancho Tomarse un descanso ahora %1:%2 %1:00 un minuto
+%n minutos un segundo
+%n segundos Por favor, relájese durante 1 segundo
-+Por favor, relájese durante %n segundos minutos segundos
-\ Kein Zeilenumbruch am Dateiende.
---- po/ga/Makefile.in
-+++ po/ga/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ga/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ga/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/ga/Makefile
-+#>- $(AUTOMAKE) --foreign po/ga/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ga/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ga/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/ga/Makefile
-+ $(AUTOMAKE) --foreign po/ga/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/ga/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/ga/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/ga/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/ga/Makefile
-+ $(AUTOMAKE) --foreign po/ga/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/ga/Makefile.in
-
-
++Por favor, relájese durante %n segundos
+\ No newline at end of file
--- po/ga/rsibreak.gmo
+++ po/ga/rsibreak.gmo
-@@ -0,0 +1,35 @@
-+Þ• * l ; ¼ ¨ ©
-+ ½ È Ð
-+ × â ì û
-+
& ; Q Y a r x Š — ¦ ¼ Æ Ì
Õ ã ó & 8 # @ ! d > † Å Þ ÷ + 3 U ; ‘ « ¸ ¿
-+ Æ
Ñ ß ò ø
& @ U a m „ ª Ã Û
ó 6 H ^ v ~ ¢ * ª % Õ û
-+
-+ @
-+ 8 \
-+ •
-+ Ÿ
-+ "
* %
-+ $ & # ! ) ' ( &Change Shortcut... &Change... &Color: &Font: &Shortcut: About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide H&ide skip button Lock desktop Logo and Icons Maintainer and Author Maximized Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Slideshow Suspended Tiny Breaks Tiny break every: Welcome _: EMAIL OF TRANSLATORS
+@@ -0,0 +1,75 @@
++Þ• 6 Ì I | ( ¡ Ê
++ Þ é ñ
++ ø & 5
++ < G X ` u ‹ “ › ¬ ² Ä Ñ à ö
# 3 F K U f p x „ – B ž D á # & ! J > l « Ä Ý ó
' : T n U 2 ×
++
++ $
++ 1
++ 8
++
++ ?
++ J
++ f
++
p
++ ~
++ ‘
++ —
++ ¤
++
·
++ Å
++ ß
++ ô
++ # , I b z ’ ¡ ¥ ´ ½ Ú ì ' A T \ k €
++ ˆ
++ “ * ž % É ï
,
@ <
8 }
1 ¶
@ è
8 ) ) b 4 3 *
++ % , 6 +
) 0 ' 5 " # - . 2 1 $ ( ! & / &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Font: &Shortcut: &Use the popup 0 seconds About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide H&ide skip button Lock desktop Logo and Icons Maintainer and Author Maximized Pause Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Skip Slideshow Suspend RSIBreak Suspended Timings Tiny Breaks Tiny break every: Welcome _: Arguments: hours, minutes both as you defined earlier
++%1 and %2 _: Arguments: minutes, seconds both as you defined earlier
++%1 and %2 _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
+Take a break now _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: One minute
++%1:00 _n: One hour
++%n hours _n: One minute
+%n minutes _n: One second
-+%n seconds minutes seconds Project-Id-Version: playground-utils/rsibreak.po
-+POT-Creation-Date: 2006-02-20 11:19+0100
++%n seconds _n: minute
++minutes _n: one minute
++%n minutes _n: one second
++%n seconds _n: second
++seconds Project-Id-Version: playground-utils/rsibreak.po
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2005-10-01 03:02-0500
+Last-Translator: Kevin Patrick Scannell <scannell at SLU.EDU>
+Language-Team: Irish <gaeilge-gnulinux at lists.sourceforge.net>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+ &Athraigh an tAicearra... &Athraigh... &Dath: &Cló: &Aicearra: Maidir le KDE Maidir le RSIBreak Údar ScÃth Fhada ScÃth fhada gach: Sain&cheaptha Athraigh Ãomhánna gach: Cumraigh RSIBreak... Ãiritheoir Ginearálta Socruithe Ghinearálta Fola&igh Fola&igh an cnaipe scipeála Cuir an deasc faoi ghlas Lógó agus DeilbhÃnà Cothaitheoir agus Údar Uaslaghdaithe Preabfhuinneog RSIBreak Seol tuairisc faoi fhabht... Atosaigh RSIBreak Cuardach athchúrsach Taispeántas Sleamhnán Crochta ScÃth Ghairid ScÃth ghairid gach: Fáilte seoc at iolfree.ie,scannell at slu dot edu Séamus Ó Ciardhuáin,Kevin Scannell Lig do scÃth anois %1:%2 %1:00 %n nóiméad
++ Tos&aigh RSIBreak go huathoibrÃoch ag am tosaithe &Athraigh an tAicearra... &Athraigh... &Dath: &Cló: &Aicearra: Ú&sáid an phreabfhuinneog 0 soicind Maidir le KDE Maidir le RSIBreak Údar ScÃth Fhada ScÃth fhada gach: Sain&cheaptha Athraigh Ãomhánna gach: Cumraigh RSIBreak... Ãiritheoir Ginearálta Socruithe Ghinearálta Fola&igh Fola&igh an cnaipe scipeála Cuir an deasc faoi ghlas Lógó agus DeilbhÃnà Cothaitheoir agus Údar Uasmhéadaithe Sos Preabfhuinneog RSIBreak Seol tuairisc faoi fhabht... Atosaigh RSIBreak Cuardach athchúrsach Ná bac leis Taispeántas Sleamhnán Cuir RSIBreak ar Fionraà Curtha ar fionraà Amuithe ScÃth Ghairid ScÃth ghairid gach: Fáilte %1 agus %2 %1 agus %2 seoc at iolfree.ie,scannell at slu dot edu Séamus Ó Ciardhuáin,Kevin Scannell Lig do scÃth anois %1:%2 %1:00 %n uair
++%n uair
++%n huaire
++%n n-uaire
++%n uair %n nóiméad
+%n nóiméad
+%n nóiméad
+%n nóiméad
@@ -9944,90 +9298,37 @@
+%n shoicind
+%n shoicind
+%n soicind
-+%n soicind nóiméad soicind
-\ Kein Zeilenumbruch am Dateiende.
---- po/gl/Makefile.in
-+++ po/gl/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/gl/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/gl/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/gl/Makefile
-+#>- $(AUTOMAKE) --foreign po/gl/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/gl/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/gl/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/gl/Makefile
-+ $(AUTOMAKE) --foreign po/gl/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/gl/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/gl/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/gl/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/gl/Makefile
-+ $(AUTOMAKE) --foreign po/gl/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/gl/Makefile.in
-
-
++%n soicind nóiméad
++nóiméad
++nóiméad
++nóiméad
++nóiméad %n nóiméad
++%n nóiméad
++%n nóiméad
++%n nóiméad
++%n nóiméad %n soicind
++%n shoicind
++%n shoicind
++%n soicind
++%n soicind soicind
++shoicind
++shoicind
++soicind
++soicind
+\ No newline at end of file
--- po/gl/rsibreak.gmo
+++ po/gl/rsibreak.gmo
@@ -0,0 +1,50 @@
-+Þ• 9 ä O ¬ è ( é
-+ & 1 9 L
-+ S ^
m { …
-+ ” Ÿ § ¼ Ò Ú í õ + : & D k q
z ˆ ˜ « , L 7 y – ± H R c ! m — D £ è ý ð Ù î { È
-+ Õ D ^ Ÿ y T
# n
! ’
> ´
ó
% - O 5 , … ²
Å Ó Ù ú
-+ $
; I \ m | ‘ ¨ ± º À Ô Ý ú
-+ ! . , [ e n ƒ – ™ ® 4 H . } — ¬
D R
-+ e + p œ £ X ¶ 1 è I v 2 Ê © W t Ì M m »
-+ Ü ç ÷ ý 7
8 ' % 3 1 $ * 5 2 . 6 " - &
-+ , 4 / ) ( 0 ! # 9 + &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++Þ• 7 Ô I Œ ° ( ± Ú
++ î ù
++ &
5 C M
++ \ g o „ š ¢ µ ½ Î Ô æ ó & 3 9
B P ` s , 7 A – y + ! 5 W _ D k ° ý ¸ Ù ¶ {
++ Õ ^ â Ÿ A T á # 6
! Z
> |
»
Ô
O í
, = j
} ‹ ‘ ² Â Ë Ü
ó % 4 I ` i r x Œ • ² Æ
++ Ù . ä & ; N ™ f 4 . 5 — d
ü
++
++ + ( T [ X n Ç 1 Ï è v ê Ê a W , „ M % s
++ ” Ÿ ¯ µ * & 1 ) ( 4 - ' / 3
% 0 # $
++ , 5 " . 6 2 ! + 7 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -10045,8 +9346,8 @@
+Your names _: This is where the user can request a break
+Take a break now _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
++%1:00 Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2006-01-15 11:22+0100
+Last-Translator: mvillarino <mvillarino at users.sourceforge.net>
+Language-Team: Galician <trasno at ceu.fi.udc.es>
@@ -10067,89 +9368,36 @@
+desabilite esta opzón. Cando se mostra o diálogo, pode destellar
+cando detecte actividade. Pode
+desabilitar esta opzón se a atopa
-+molesta. Con esta opzón pode indicar se quere ver un contador durante os descansos. Mostrará unha conta atrás, para que saiba canto durará o descanso. Mostrará-se por riba da imaxe, cando se mostren imaxes. Con esta opzón pode indicar se quer ver o diálogo destellar cando detecte actividade. Con esta opzón pode indicar se quer ver o diálogo cando chegue o descanso. Fará unha contra atrás até cero, polo que saberá canto tempo queda de descanso. Con esta caixa pode indicar que quere que RSIBreak se arrinque xunto con KDE. mvillarino at users.sourceforge.net mvillarino Descansar agora %1:%2 %1:00 minutos segundos
-\ Kein Zeilenumbruch am Dateiende.
---- po/it/Makefile.in
-+++ po/it/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/it/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/it/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/it/Makefile
-+#>- $(AUTOMAKE) --foreign po/it/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/it/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/it/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/it/Makefile
-+ $(AUTOMAKE) --foreign po/it/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/it/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/it/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/it/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/it/Makefile
-+ $(AUTOMAKE) --foreign po/it/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/it/Makefile.in
-
-
++molesta. Con esta opzón pode indicar se quere ver un contador durante os descansos. Mostrará unha conta atrás, para que saiba canto durará o descanso. Mostrará-se por riba da imaxe, cando se mostren imaxes. Con esta opzón pode indicar se quer ver o diálogo destellar cando detecte actividade. Con esta opzón pode indicar se quer ver o diálogo cando chegue o descanso. Fará unha contra atrás até cero, polo que saberá canto tempo queda de descanso. Con esta caixa pode indicar que quere que RSIBreak se arrinque xunto con KDE. mvillarino at users.sourceforge.net mvillarino Descansar agora %1:%2 %1:00
+\ No newline at end of file
--- po/it/rsibreak.gmo
+++ po/it/rsibreak.gmo
-@@ -0,0 +1,54 @@
-+Þ• < ü S Ü ( ( ) R
-+ f q y Œ
-+ “ ž
» Å
-+ Ô ß ç ü - 5 F L ^ k z & „ « ±
º È Ø ë , Œ 7 ¹ – ñ ˆ ’ £ ! Ï × D ã ( ý 0 Ù .
-+ { Õ „ ^ Z Ÿ ¹ T Y
# ®
! Ò
> ô
3 L e 9 ™ Ó Û J ã ) . X
-+ o z " ƒ ¦
² À
Ù ç û ! 1 G ] g z ƒ ™ £ ¾ Í
-+ Ú ' å
( : N § c 5 > A ¨ € ) < N % V | ‚ t Ž b
ô p e ö o û Ï k S ; § ¶ Ë Ñ × ë D F M 2 3 5 7 0 # $ 8 / ' ) . ( + 1 * 6 :
-+ ; 9 < ! " % & , - 4 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
+@@ -0,0 +1,77 @@
++Þ• O ” k ¸ ( ¹ â
++ ö # 6
++ = H d
s ‹ š
++ ¡ ¬ ½ Å ÿ Ú c Ú [ > š ° ¸ Ë Ó ä ê ü
++
++ *
++ @
++ & J
++ q
++ w
++
€
++ Ž
++ ž
++ ±
++ , R 7 – · N S ] n x ! — + ¹ å í ù
&
B
V
l
D ƒ
È
Ù
ý á
Ù ß { ¹ Õ 5 ^ Ÿ j T
++ _ # á ! > ' f ˜ ² 9 Ì J ) k •
++ ¬ · ! À " â
' G
` n ‚ › ¢ ¯ Á Ñ ç v p ~ ï " + A K d Ž ›
++ ± ' ¼ ä ö ÿ % § : 5 â > ¨ W + 3 % O - u £ © µ Ç Û î " t < ± É b Ó ô 6 + ¼ o Á! Ï 1" S # ƒ U# Ù# ñ# $ $ $ !$ 5$ D K$ $ -
' 5 H J M 2 $ 6
++ G C 8 , ( + I ) E 7 = O " 3 @ # A B 1 : / ! ? * % & K 4 > . < ; N D F 0 9 L &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Show when timers are reset &Use the popup Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Changes in RSIBreak 0.5.0
+
++In this version we have changed the way the timers work. Instead of indicating after how many tiny breaks you want a big break, you can now setup after how many minutes you want a bigbreak.
++Please review your current settings.
++
++ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended The timers have now been reset This way you can have a break now Timer for the tiny break has now been reset Timings Tiny Breaks Tiny break every: Total amount of big breaks Total amount of tiny breaks Total recorded time Total time being idle Total time of activity Try to prevent Repetitive Strain Injury by reminding a user to rest. Usage Statistics Welcome Welcome to RSIBreak
++
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
+
@@ -10161,7 +9409,7 @@
+turn this function off. When the popup is shown, it can flash
+when there is activity detected. You
+can turn it off when you find it too
-+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. With this checkbox you indicate that you want to see when the timers are reset. This happens when you have been idle for a while. _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
+Take a break now _: minutes:seconds
@@ -10169,17 +9417,23 @@
+%1:00 _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
-+PO-Revision-Date: 2005-12-28 14:18+0100
++Please relax for %n seconds _n: one second
++%n seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
++PO-Revision-Date: 2006-03-21 16:56+0100
+Last-Translator: Nicola Ruggero <nixprog.adsl at tiscali.it>
+Language-Team: Italian <kde-i18n-it at kde.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+X-Generator: KBabel 1.10.2
-+ Avvia &automaticamente RSIBreak all'avvio &Cambia scorciatoia... &Cambia... &Colore: &Lampeggia quando rileva attività &Carattere: &Scorciatoia: &Usa l'avviso a comparsa Annulla pausa Informazioni su KDE Informazioni su RSIBreak Pause lunghe Pe&rsonalizzato Cambia immagini ogni: Configura RSIBreak... Contatore Per una durata di: Generale Impostazioni generali Nascond&i Percorso cartella immagine Blocca desktop Logo e icone Massimizza Creazione pacchetti e relativi problemi Avviso a comparsa RSIBreak Segnala un bug... Ripristina RSIBreak Cerca ricorsivamente Seleziona qui il colore da usare per il contatore. Dato che è utilizzato sopra alle immagini, seleziona un colore che sia visibile nella maggior parte delle immagini. Seleziona qui il carattere da usare per il contatore. Seleziona qui la scorciatoia da usare per annullare una pausa. Seleziona la cartella dalla quale vuoi vedere le immagini. Queste immagini sono mostrate casualmente durante le pause. Se vuoi, puoi effettuare una ricerca ricorsiva... Mostra diapositive Sospendi RSIBreak Sospeso Con questo puoi fare una pausa adesso Tempi Pause brevi Prova a prevenire la sindrome da sforzo ripetuto (Repetitive Strain Injury) ricordando all'utente di fare una pausa. Benvenuto Benvenuto in RSIBreak
++X-Generator: KBabel 1.11.1
++ Avvia &automaticamente RSIBreak all'avvio &Cambia scorciatoia... &Cambia... &Colore: &Disabilita scorciatoia per salta &Lampeggia quando rileva attività &Carattere: &Scorciatoia: &Mostra quando vengono azzerati i tempi &Usa l'avviso a comparsa Annulla pausa Informazioni su KDE Informazioni su RSIBreak Autore Pause lunghe Pausa lunga ogni: Pe&rsonalizzato Cambia immagini ogni: Cambiamenti in RSIBreak 0.5.0
+
++In questa versione abbiamo cambiato il modo in cui funzionano i tempi. Al posto di scegliere dopo quante pause corte effettuare un pausa lunga, ora puoi impostare dopo quanti minuti desideri una pausa lunga.
++Per favore controlla le impostazioni correnti.
++
++ Marca questa opzione per disabilitare e nascondere il pulsante salta. In questo modo puoi evitare di saltare le pause. Marca questa opzione per disabilitare la scorciatoia per salta. In questo modo puoi evitare di saltare le pause. Configura RSIBreak... Contatore Per una durata di: Generale Impostazioni generali Nascond&i Nascond&i pulsante salta Percorso cartella immagine Blocca desktop Logo e icone Responsabile e autore Massimizza Creazione pacchetti e relativi problemi Avviso a comparsa RSIBreak Segnala un bug... Ripristina RSIBreak Cerca ricorsivamente Seleziona qui il colore da usare per il contatore. Dato che è utilizzato sopra alle immagini, seleziona un colore che sia visibile nella maggior parte delle immagini. Seleziona qui il carattere da usare per il contatore. Seleziona qui la scorciatoia da usare per annullare una pausa. Seleziona la cartella dalla quale vuoi vedere le immagini. Queste immagini sono mostrate casualmente durante le pause. Se vuoi, puoi effettuare una ricerca ricorsiva... Salta Mostra diapositive Sospendi RSIBreak Sospeso I tempi sono stati azzerati Con questo puoi fare una pausa adesso Il tempo per la pausa breve è stato azzerato Tempi Pause brevi Pausa breve ogni: Totale pause lunghe Totale pause brevi Tempo totale registrato Tempo totale di inattività Tempo totale di attività Prova a prevenire la sindrome da sforzo ripetuto (Repetitive Strain Injury) ricordando all'utente di fare una pausa. Statistiche di utilizzo Benvenuto Benvenuto in RSIBreak
++
+Nel vassoio di sistema puoi vedere che è apparso un orologio. Quando fai clic con il pulsante destro sopra di esso ti comparirà un menu dal quale, ad esempio, puoi andare nella finestra di configurazione.
+Per sapere quando avverrà la prossima pausa resta fermo con il cursore del mouse sopra l'icona.
+
@@ -10191,103 +9445,34 @@
+disabilita questa funzione. L'avviso può lampeggiare se viene rilevata
+dell'attività quando viene mostrato. Puoi
+disattivare quest'opzione se la ritieni troppo
-+invadente. Con questa casellina puoi decidere se vuoi vedere un contatore durante le pause. Questo contatore fa un conto alla rovescia fino a zero per indicarti quanto lunga è la pausa. Quando vengono mostrate le immagini il contatore verrà mostrato sopra all'immagine. Con questa casellina puoi decidere se vuoi vedere l'avviso a comparsa lampeggiare quando rileva dell'attività . Con questa casellina puoi decidere se vuoi vedere l'avviso a comparsa quando è ora di fare una pausa. Verrà mostrato anche un conto alla rovescia fino a zero, così puoi sapere quanto sarà lunga la pausa. Con questa casellina puoi decidere che RSIBreak venga eseguito quando si avvia KDE. nixprog.adsl at tiscali.it Nicola Ruggero Fai una pausa adesso %1:%2 %1:00 Un minuto
++invadente. Con questa casellina puoi decidere se vuoi vedere un contatore durante le pause. Questo contatore fa un conto alla rovescia fino a zero per indicarti quanto lunga è la pausa. Quando vengono mostrate le immagini il contatore verrà mostrato sopra all'immagine. Con questa casellina puoi decidere se vuoi vedere l'avviso a comparsa lampeggiare quando rileva dell'attività . Con questa casellina puoi decidere se vuoi vedere l'avviso a comparsa quando è ora di fare una pausa. Verrà mostrato anche un conto alla rovescia fino a zero, così puoi sapere quanto sarà lunga la pausa. Con questa casellina puoi decidere che RSIBreak venga eseguito quando si avvia KDE. Con questa casellina puoi decidere se vuoi vedere quando i tempi vengono azzerati. Questo accade quando rimani inattivo per un po'. nixprog.adsl at tiscali.it Nicola Ruggero Fai una pausa adesso %1:%2 %1:00 Un minuto
+%n minuti Un secondo
+%n secondi Per favore riposati per 1 secondo
-+Per favore riposati per %n secondi minuti secondi
-\ Kein Zeilenumbruch am Dateiende.
---- po/nl/Makefile.in
-+++ po/nl/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/nl/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/nl/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/nl/Makefile
-+#>- $(AUTOMAKE) --foreign po/nl/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/nl/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/nl/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/nl/Makefile
-+ $(AUTOMAKE) --foreign po/nl/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/nl/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/nl/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/nl/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/nl/Makefile
-+ $(AUTOMAKE) --foreign po/nl/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/nl/Makefile.in
-
-
++Per favore riposati per %n secondi un secondo
++%n secondi
+\ No newline at end of file
--- po/nl/rsibreak.gmo
+++ po/nl/rsibreak.gmo
-@@ -0,0 +1,79 @@
-+Þ• J l e ¼ P ( Q z
-+ Ž ™ ¡ » Î
-+ Õ à
ï ý
-+ ( 9 A ÿ V c V [ º , 4 G O ` f x Š — ¦ ¼ & Æ í ó
ü
+@@ -0,0 +1,88 @@
++Þ• ‚ , < ð
++ ! ñ
++ " ( 6 _
++ s ~ † ³ & º
++ á ì
! / 9 H
++ O Z
++ k v ~ ÿ “ c “
[ ÷
S i q „ — Ÿ ° ¶ Z È + # , O | ü ~ Ÿ ¯ ¼ Ë á ë # ÿ # # $ G $ l & ‘ ¸ ¾ Ê á ç
ð þ ) < , Ý 7
++ – B Ù Þ è ù f " ; ‰ L Å 0 1 1 b P ” 9 å ' G G @ ' Ð Q ø : J + … ! ± > Ó + C K W i u ¬ À Ö D í 2 C ý K Ù I { # Õ Ÿ ^ u Ÿ Ô T t É Ý K [ ) B … D È #
! 1 > S c ’ c ö Z! s! Œ! ¢! ¼! 9 Ö! " #" =" W" d j" ( Ï# ( ø# + !$ M$ d$ q$ * y$ ¤$ ¾$ 3 Ë$ ÿ$ # % /%
++ @% K%
^% l% % †% “% £%
++ °% »% Ó% ‡ î& | v' ó' ( (
++ (( 3( <(
++ R( ]( o }( ( í( ( ) ¤ ?) ¤ ä) ‰* ž* ²* Æ* Û* ð* + + . .+ , ]+ . Š+ , ¹+ 2 æ+ ,
++ , *, @, F, O, b, o, Ž, £, ª ·, ( b- 9 ‹- € Å-
F. T. d. y. : …. e À. O &/ 1 v/ 0 ¨/ / Ù/ / 0 @ 90 1 z0 ¬0 A Å0 < 1 D1 @ ]1 1 ž1 * Ð1 ' û1 ; #2 _2 : d2 Ÿ2 ¦2 ³2 Ã2 Ð2 ë2 3 3 3 H +3 t3 3 2 ˆ3 ÿ »4 ˜ »5 Ì T6 I !7 – k7 I 8 ” L8 4 á8 c : z: ƒ: $ Œ: ±: Ë: á: é: ò: ø: þ: ; &; 9 ?; y; ; ¨; Â; " E ; 2 4 o r ~ { n R g / M V s L u 7 K : O b ' h = G U Q . ^ ( * ` w }
++ % B 5 | P I j F p t f e & y 1 , _ # 0 ‚ - ! c 6 T \ @ a ] Y d C A W H ) m + 9 v € l i J < > X 8 D ? x k 3 S Z [ N z q $
%1 remaining until next big break %1 remaining until next tiny break &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Reset timers after period of idleness &Shortcut: &Show when timers are reset &Use the popup 0 seconds Abort a break About KDE About RSIBreak Author Big Breaks Big break every: Big breaks C&ustom Change images every: Changes in RSIBreak 0.5.0
+
-+
-+ -
-+ , Î
-+ 7 û
-+ – 3 Ê Ï Ù ê ! ô * D < ý ‰ Ù ‡
{ a Õ Ý ^ ³ Ÿ T ² ^ _ f # Æ p ê q [ ! Í > ï . G ` z 9 ” Î Ö d Þ + C o † “ * › Æ à í ù
-+
+ > E R
-+ b m … ‡ | ( ¥ »
-+ Â Í Ö
-+ ì ÷ , A V l 2 | ¯ µ ¾ Ñ æ ª ú ( ¥ 9 Î €
‰ — § ¼ ' È ð ÷ H ] 2 d ÿ — ˜ — Ì 0 I ý – G I Þ ( (! ( Q! $ z! . Ÿ! . Î! ý! " -" 3" 9" P" 9 i" £" «" 6 B & ) @ > C 1 E ? + 0 : 9 7 A . J 5 (
-+ " H G / I = < % - ! 2
D # ; F $ 4 * 8 , ' 3 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Changes in RSIBreak 0.5.0
-+
+In this version we have changed the way the timers work. Instead of indicating after how many tiny breaks you want a big break, you can now setup after how many minutes you want a bigbreak.
+Please review your current settings.
+
-+ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter Currently idle for For a duration of: General General Settings H&ide H&ide skip button Here you can set how long one image should be shown before it is replaced by the next one. Here you can set how long the big break is. Here you can set how long the tiny break is. Here you can set how often you want a big break. One minute means 60 seconds of movement with the mouse or work on the keyboard Here you can set how often you want a tiny break. One minute means 60 seconds of movement with the mouse or work on the keyboard. Image Folder Path Last big break Last tiny break Lock desktop Logo and Icons Maintainer and Author Maximized Maximum idle period Number of skipped big breaks (idle) Number of skipped big breaks (user) Number of skipped tiny breaks (idle) Number of skipped tiny breaks (user) Packaging and help with related issues Pause Pause score Percentage of activity Popup RSIBreak Report Bug... Reset Reset the statistics Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended The timers have now been reset This is a percentage of activity, based on the seconds of activity vs. total time RSIBreak is running. This is an indication how well you bahaved with the brakes. This is the biggest period of inactivity measured while RSIBreak is running. This is the current idle time. This is the time and date of the last big break. This is the time and date of the last tiny break. This is the total amount of big breaks which are skipped because you where idle. This is the total amount of big breaks which you skipped. This is the total amount of big breaks. This is the total amount of time you did not use the keyboard or mouse. This is the total amount of time you used the keyboard or mouse. This is the total amount of tiny breaks This is the total amount of tiny breaks which are skipped because you where idle. This is the total amount of tiny breaks which you skipped. This is the total time RSIBreak is running. This way you can have a break now This will reset all statistics to zero. Is that what you want? Time Timer for the tiny break has now been reset Timings Tiny Breaks Tiny break every: Tiny breaks Total amount of big breaks Total amount of tiny breaks Total recorded time Total time being idle Total time of activity Try to prevent Repetitive Strain Injury by reminding a user to rest. Usage Statistics Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -10300,21 +9485,26 @@
+turn this function off. When the popup is shown, it can flash
+when there is activity detected. You
+can turn it off when you find it too
-+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. With this checkbox you indicate that you want to see when the timers are reset. This happens when you have been idle for a while. With this checkbox you indicate that you want to use idle detection. Unchecked RSIBreak will not reset the timers when you are idle for the duration of a break, but it will take into account the seconds you work/are idle. You are using KDE 3.3 or older, with this version of KDE, you can not change this shortcut. _: Arguments: hours, minutes both as you defined earlier
++%1 and %2 _: Arguments: minutes, seconds both as you defined earlier
++%1 and %2 _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
-+Take a break now _: minutes:seconds
++Take a break now _: Translate this as the longest plural form. This is used to calculate the width of window
++minutes _: Translate this as the longest plural form. This is used to calculate the width of window
++seconds _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: One minute
++%1:00 _n: One hour
++%n hours _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
-+PO-Revision-Date: 2006-02-21 18:08+0100
++Please relax for %n seconds _n: minute
++minutes _n: one minute
++%n minutes _n: one second
++%n seconds _n: second
++seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
++PO-Revision-Date: 2006-04-01 19:00+0200
+Last-Translator: Tom Albers <tomalbers at kde.nl>
+Language-Team: <kde-i18n-nl at kde.org>
+MIME-Version: 1.0
@@ -10322,12 +9512,12 @@
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.11.1
+Plural-Forms: nplurals=2; plural=(n != 1);
-+ RSIBreak &automatisch starten bij start KDE Sneltoets &wijzigen... &Wijzigen... &Kleur: Sneltoets voor minimaliseren uits&chakelen &Knipperen bij activiteit &Lettertype: &Sneltoets: &Popup gebruiken Een pauze afbreken Info over KDE Info over RSIBreak Auteur Lange pauzes Lange pauze na: &Aangepast Wissel afbeelding elke: Wijzigingen in RSIBreak 0.5
++ %1 resterend tot de volgende lange pauze %1 resterend tot de volgende korte pauze RSIBreak &automatisch starten bij start KDE Sneltoets &wijzigen... &Wijzigen... &Kleur: Sneltoets voor minimaliseren uits&chakelen &Knipperen bij activiteit &Lettertype: Timers terugzetten naar beginwaarde bij passiviteit &Sneltoets: Toon wanneer timers teruggezet zijn &Popup gebruiken 0 seconden Een pauze afbreken Info over KDE Info over RSIBreak Auteur Lange pauzes Lange pauze na: Lange pauzes &Aangepast Wissel afbeelding elke: Wijzigingen in RSIBreak 0.5
+
+In deze versie is het systeem van de pauzetijden veranderd. In plaats van een lange pauze na een aantal kleine pauzes, geeft u nu aan na hoeveel minuten een lange pauze zou moeten plaatsvinden.
+Het is dus belangrijk dat u uw instellingen even nakijkt.
+
-+ Selecteer deze optie om de minimaliseerknop uit te schakelen en te verbergen. Zo kunt u voorkomen dat de pauze kan worden overgeslagen. Selecteer deze optie om de minimaliseersneltoets uit te schakelen. Zo kunt u voorkomen dat de pauze kan worden overgeslagen. RSIBreak instellen... Teller Gedurende: Algemeen Algemene instellingen &Verbergen Knop '&Minimaliseren' verbergen Map met afbeeldingen Desktop vergrendelen Logo en pictogrammen Onderhouder en Auteur Gemaximaliseerd Hulp bij het maken van een pakket voor distributie Popup RSIBreak Bug rapporteren... RSIBreak voortzetten Inclusief submappen Selecteer de kleur die gebruikt moet worden voor de teller. De teller wordt geplaatst over een foto heen, dus kies een kleur die leesbaar is voor de meeste van uw foto's. Selecteer het lettertype voor de teller. Selecteer de sneltoets voor het onderbreken van de pauze. Selecteer de map die afbeeldingen bevat die u wilt zien tijdens de pauze. Deze kan recursief doorzocht worden, indien gewenst... Minimaliseren Diavoorstelling RSIBreak onderbreken Onderbroken Op deze manier is een pauze te forceren Tijden Korte pauzes Korte pauze na: Probeert RSI te voorkomen door de gebruiker te herinneren aan een pauze. Welkom Welkom bij RSIBreak
++ Selecteer deze optie om de minimaliseerknop uit te schakelen en te verbergen. Zo kunt u voorkomen dat de pauze kan worden overgeslagen. Selecteer deze optie om de minimaliseersneltoets uit te schakelen. Zo kunt u voorkomen dat de pauze kan worden overgeslagen. RSIBreak instellen... Teller Huidige periode passief Gedurende: Algemeen Algemene instellingen &Verbergen Knop '&Minimaliseren' verbergen Hier kunt u instellen hoe lang een afbeelding getoond moet worden voordat het vervangen wordt door de volgende. Stel hier de duur van de lange pauze in. Stel hier de duur van de korte pauze in. Hier kunt u instellen wanneer u een lange pauze wilt. Eén minuut betekent dat een pauze getoond wordt na 60 seconden beweging met de muis of arbeid op de computer. Hier kunt u instellen wanneer u een korte pauze wilt. Eén minuut betekent dat een pauze getoond wordt na 60 seconden beweging met de muis of arbeid op de computer. Map met afbeeldingen Laatste lange pauze Laatste korte pauze Desktop vergrendelen Logo en pictogrammen Onderhouder en Auteur Gemaximaliseerd Langste periode passief Aantal overgeslagen lange pauzes (passiviteit) Aantal overgeslagen lange pauzes (gebruiker) Aantal overgeslagen korte pauzes (passiviteit) Aantal overgeslagen korte pauzes (gebruiker) Hulp bij het maken van een pakket voor distributie Pauze Pauzescore Activiteitspercentage Popup RSIBreak Bug rapporteren... Beginwaarden Statistieken naar beginwaarden RSIBreak voortzetten Inclusief submappen Selecteer de kleur die gebruikt moet worden voor de teller. De teller wordt geplaatst over een foto heen, dus kies een kleur die leesbaar is voor de meeste van uw foto's. Selecteer het lettertype voor de teller. Selecteer de sneltoets voor het onderbreken van de pauze. Selecteer de map die afbeeldingen bevat die u wilt zien tijdens de pauze. Deze kan recursief doorzocht worden, indien gewenst... Minimaliseren Diavoorstelling RSIBreak onderbreken Onderbroken De timer voor de lange pauze is nu terug op de beginwaarde Dit is het activiteitspercentage, gebaseerd op de activiteit ten opzichte van de totale gemeten tijd. Dit is een indicatie van hoe goed u geluisterd heeft naar het verzoek om pauze. Dit is de langst gemeten periode van passiviteit. Dit toont hoe lang u op dit moment passief bent. Dit is het tijdstip van de laatste lange pauze. Dit is het tijdstip van de laatste korte pauze. Het aantal lange pauzes dat is overgeslagen vanwege passiviteit. Het aantal lange pauzes dat u heeft overgeslagen. Het aantal lange pauzes. Dit is de tijd dat u het toetsenbord of muis niet heeft gebruikt. Dit is de tijd dat u het toetsenbord of muis heeft gebruikt. Het aantal korte pauzes. Het aantal korte pauzes dat is overgeslagen vanwege passiviteit. Het aantal korte pauzes dat u heeft overgeslagen. Dit is de totale tijd dat RSIBreak draait. Op deze manier is een pauze te forceren Dit zal alle statistieken op nul zetten, is dat wat u wilt? Tijd De timer voor de korte pauze is nu terug op de beginwaarde Tijden Korte pauzes Korte pauze na: Korte pauzes Totaal aantal lange pauzes Totaal aantal korte pauzes Totale tijd Tijd passief Tijd actief Probeert RSI te voorkomen door de gebruiker te herinneren aan een pauze. Statistieken Welkom Welkom bij RSIBreak
+
+In uw systeemvak ziet u nu een klok. Als u daar met de rechter muisknop op klikt, dan wordt er een contextmenu geopend waarin u onder andere het programma kunt instellen.
+Als u wilt weten wanneer de volgende pauze is, beweeg de muisaanwijzer over de klok.
@@ -10343,100 +9533,97 @@
+kan het knipperen wanneer er activiteit
+gedetecteerd wordt. U kunt het
+uitschakelen wanneer u dit te
-+overheersend vindt. Hier kunt u aangeven of u de teller wilt zien gedurende de pauzes. Het zal aftellen naar nul, zodat u kunt zien hoe lang de pauze duurt. De teller wordt bovenop de foto getoond, als foto's worden getoond. Hier kunt u aangeven of de popup moet knipperen wanneer er activiteit is. Hier kunt u aangeven of u de popup wilt zien wanneer het tijd is voor een pauze. Het zal aftellen naar nul, zodat u kunt zien hoe lang de pauze duurt. Hier kunt u aangeven of RSIBreak gestart moet worden wanneer u KDE start. %1 resterend tot de volgende lange pauze %1 resterend tot de volgende korte pauze tomalbers at kde.nl,rinsedevries at kde.nl %1 en %2 resterend tot de volgende lange pauze %1 en %2 resterend tot de volgende korte pauze Tom Albers,Rinse de Vries Nu een pauze inlassen %1:%2 %1:00 Eén minuut
++overheersend vindt. Hier kunt u aangeven of u de teller wilt zien gedurende de pauzes. Het zal aftellen naar nul, zodat u kunt zien hoe lang de pauze duurt. De teller wordt bovenop de foto getoond, als foto's worden getoond. Hier kunt u aangeven of de popup moet knipperen wanneer er activiteit is. Hier kunt u aangeven of u de popup wilt zien wanneer het tijd is voor een pauze. Het zal aftellen naar nul, zodat u kunt zien hoe lang de pauze duurt. Hier kunt u aangeven of RSIBreak gestart moet worden wanneer u KDE start. Hier kunt u aangeven dat u wilt zien wanneer de timers naar de beginwaarden zijn teruggezet. Dit gebeurt wanneer u een periode passief bent geweest. Hier kunt u aangeven dat u passiviteit wilt meten. Indien niet geactiveerd, zal RSIBreak de timers niet terugzetten naar de beginwaarden nadat u passief bent geweest gedurende de duur van de pauze. RSIBreak houdt echter wel rekening met passiviteit en activiteit voor het bepalen van het moment van pauzeren. U gebruikt KDE 3.3 of ouder. Met deze versie van KDE is het niet mogelijk de sneltoets te wijzigen. %1 en %2 %1 en %2 tomalbers at kde.nl,rinsedevries at kde.nl Tom Albers,Rinse de Vries Nu een pauze inlassen minuten seconden %1:%2 %1:00 Eén uur
++%n uren Eén minuut
+%n minuten Eén seconde
+%n seconden Pauzeer gedurende 1 seconde
-+Pauzeer gedurende %n seconden minuten seconden
-\ Kein Zeilenumbruch am Dateiende.
---- po/pt/Makefile.in
-+++ po/pt/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/pt/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/pt/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/pt/Makefile
-+#>- $(AUTOMAKE) --foreign po/pt/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/pt/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/pt/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/pt/Makefile
-+ $(AUTOMAKE) --foreign po/pt/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/pt/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/pt/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/pt/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/pt/Makefile
-+ $(AUTOMAKE) --foreign po/pt/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/pt/Makefile.in
-
-
++Pauzeer gedurende %n seconden Eén minuut
++%n minuten één minuut
++%n minuten één seconde
++%n seconden Eén seconde
++%n seconden
+\ No newline at end of file
+--- po/pl/rsibreak.gmo
++++ po/pl/rsibreak.gmo
+@@ -0,0 +1,57 @@
++Þ• : ì O ¼ ø ( ù "
++ 6 A I \
++ c n
} ‹ •
++ ¤ ¯ · Ì â ê ý . ; J & T {
Š ˜ ¨ » , \ 7 ‰ – Á X b s ! } Ÿ § D ³ ø ý Ù þ { Ø
++ Õ T ^ * Ÿ ‰ T )
# ~
! ¢
> Ä
5 O 9 i ? £ ? ã #
++ 5 @ H
++ e p y — ©
++ ¯
º È Ñ æ ý , ! 3 U e r @ ƒ Ä Ù â ô z š 7 º ® ò ¡ °
++ Ã 8 Î
r ' š 4 õ Õ ¯ Ë { k Î ë C º þ 0 E K Q n P Ž 7 :
' % 3 1 $ * 5 2 . 6 " - & 9
++ , 4 8 / ) ( 0 ! # + &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Big Breaks C&ustom Change images every: Configure RSIBreak... Counter For a duration of: General General Settings H&ide Image Folder Path Lock desktop Logo and Icons Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++
++In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
++When you want to know when the next break is, hover over the icon.
++
++Use RSIBreak wisely. When it is time to break, RSIBreak can
++show a popup near the systemtray, then
++you can take a break without the screen
++being replaced by a picture. If you
++want to see pictures and not the popup,
++turn this function off. When the popup is shown, it can flash
++when there is activity detected. You
++can turn it off when you find it too
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
++Your names _: This is where the user can request a break
++Take a break now _: minutes:seconds
++%1:%2 _: minutes:seconds
++%1:00 _n: One minute
++%n minutes _n: One second
++%n seconds _n: Please relax for 1 second
++Please relax for %n seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
++PO-Revision-Date: 2006-03-25 23:54+0100
++Last-Translator: Krzysztof Lichota <lichota at mimuw.edu.pl>
++Language-Team: Polish <pl at li.org>
++MIME-Version: 1.0
++Content-Type: text/plain; charset=UTF-8
++Content-Transfer-Encoding: 8bit
++X-Generator: KBabel 1.11.2
++ &Automatycznie uruchamiaj RSIBreak podczas uruchomienia systemu &Zmień skrót... &Zmień... &Kolor: &Miganie podczas aktywności &Czcionka: &Skrót: Uży&j wyskakującego okienka Przerwij przerwę O KDE O RSIBreak Duże przerwy &Własny Zmieniaj obrazki co: Konfiguruj RSIBreak... Licznik Przez czas: Ogólne Ustawienia ogólne &Ukryj Ścieżka do katalogu z obrazkami Zablokuj pulpit Logo i ikony Zmaksymalizowany Przygotowanie pakietów oraz pomoc w sprawach z nimi związanych Wyskakujące okienko RSIBreak Zgłoś błąd... Przywróć RSIBreak Przeszukaj podkatalogi Wybierz kolor dla licznika. Będzie on wyświetlany na obrazku, więc wybierz taki, który będzie na nim dobrze widoczny. Wybierz czcionkę dla licznika. Wybierz skrót, za pomocą którego odwołasz przerwę. Wybierz katalog, z którego chcesz oglądać obrazki. Obrazki te będą losowo wyświetlane podczas przerw. Jeśli chcesz, katalog może być przeszukiwany z podkatalogami... Pokaz slajdów Wstrzymaj RSIBreak Wstrzymany W ten sposób możesz zrobić sobie przerwę natychmiast Odmierzanie czasu Małe przerwy Próbuje zapobiec RSI (urazowi stawów spowodowanemu powtarzaniem czynności), poprzez przypominanie o odpoczynku. Witaj Witaj w RSIBreak
++
++Na swojej tacce systemowej znajdziesz zegarek. Kiedy klikniesz na nim prawym przyciskiem myszy zobaczysz menu przez które możesz między innymi skonfigurować RSIBreak.
++Kiedy chcesz się dowiedzieć, kiedy odbędzie się następna przerwa, najedź na ikonę.
++Korzystaj z RSIBreak mądrze. Kiedy zbliża się czas na przerwę RSIBreak może
++wyświetlić wyskakujące okienko w pobliżu tacki systemowej
++Wtedy możesz odpocząć bez pokazywania obrazka
++Jeśli chcesz ogladać obrazek, a nie wyskakujące okienko
++to wyłącz tę opcję. Kiedy wyskakujące okienko jest wyświetlane, może migać,
++kiedy zostanie wykryty jakiś ruch. Możesz
++wyłączyć tę opcję, jeśli uznasz, że jest ona
++zbyt nieprzyjemna. Zaznaczając tą opcję, możesz wskazać czy chcesz widzieć licznik podczas przerwy. Będzie on odliczał czas do zera, tak więc będziesz wiedzieć, ile jeszcze będzie trwała przerwa. Jeśli pokazywane są obrazki, licznik będzie pokazywany na obrazku. Zaznaczając tę opcję, możesz wybrać, czy chcesz, aby wyskakujące okienko migało podczas aktywności. Zaznaczając tę opcję, możesz określić, czy chcesz widzieć wyskakujące okienko, kiedy trwa przerwa. Czas będzie odliczany do zera, tak więc będziesz wiedzieć, ile jeszcze będzie trwała przerwa. Po zaznaczeniu tej opcji RSIBreak uruchomi się podczas startu KDE. marsjannno at gmail.com Michał Marsjannno Marcjanik Zrób przerwę teraz %1:%2 %1:00 %n minuta
++%n minuty
++%n minut %n sekunda
++%n sekundy
++%n sekund Odpocznij przez %n sekundÄ™
++Odpocznij przez %n sekundy
++Odpocznij przez %n sekund
+\ No newline at end of file
--- po/pt/rsibreak.gmo
+++ po/pt/rsibreak.gmo
-@@ -0,0 +1,71 @@
-+Þ• J l e ¼ P ( Q z
-+ Ž ™ ¡ » Î
-+ Õ à
ï ý
-+ ( 9 A ÿ V c V [ º , 4 G O ` f x Š — ¦ ¼ & Æ í ó
ü
+@@ -0,0 +1,81 @@
++Þ• ~ ü °
++ ! ±
++ " Ó
++ ( ö
++
++ 3 > F ` s & z
++ ¡ ¬ È ×
á ï ù
++
++ + 6 > ÿ S c S
[ ·
) 1 D L ] c Z u + Ð , ü ) © + = L \ i x Ž ˜ # ¬ # Ð $ ô $ & > e k w Ž ”
« ± Æ Ö é , Š 7 · – ï † ‹ • ¦ ° f Ï ; 6 L r P ¿ 9 ' J G r @ º ' û Q # : u + ° ! Ü > þ = + B n v ‚ ” » × ë D ] n ý v Ù t { N Õ Ê ^ Ÿ ÿ T Ÿ ô Ý v [ T B ° D ó # 8 ! \ > ~ c ½ c ! … ž · Í ç 9 ! ;! N! h! ‚! X •! & î" ' # / =# m#
„# ’# ! ˜# º# Ø# 9 è# "$ . +$ Z$
++ k$ v$
Œ$ š$ $ ³$ Â$ ×$ æ$ õ$ ! % s 0& h ¤&
' &' /' 8' >' S' ]' t }' 7 ò' 8 *( — c( ˜ û( ”) ®) Ã) Ù) ê) þ)
++ * * 2 A* 0 t* 3 ¥* 1 Ù* 5 + A+ G+ \+ v+ + ˆ+ + §+ ¿+ Ô+ µ ì+ 7 ¢, D Ú, ¦ - Æ- Î- Ý- ò- $ û- u . : –. Q Ñ. V #/ < z/ * ·/ J â/ D -0 * r0 Z 0 = ø0 7 61 * n1 F ™1 à1 7 æ1 2 %2 52 K2 [2 s2 Œ2 ¢2 ¾2 V Ø2 /3 M3 ; W3 ô “4 ’ ˆ5 Þ 6 c ú6 ó ^7 U R8 Ž ¨8 79 d =: ¢: ª: ²: Ñ: ï: ;
; ; ; "; 4; I; M `; ®; ¿; Ô; ë; ! D : 1 3 k n z w j N c . R o ] q 6 J 9 K ^ & d < F Q M - Z ' ) \ s y
++ $ A 4 x L H } f E l p b a % u 0 + [ " / ~ , _ 5 P X ? { Y U ` B @ S G ( i * 8 r | h e I ; = T 7 C > t g 2 O V W v m #
%1 remaining until next big break %1 remaining until next tiny break &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Reset timers after period of idleness &Shortcut: &Show when timers are reset &Use the popup 0 seconds Abort a break About KDE About RSIBreak Author Big Breaks Big break every: Big breaks C&ustom Change images every: Changes in RSIBreak 0.5.0
+
-+
-+ -
-+ , Î
-+ 7 û
-+ – 3 Ê Ï Ù ê ! ô * D < ý ‰ Ù ‡
{ a Õ Ý ^ ³ Ÿ T ² ^ _ f # Æ p ê q [ ! Í > ï . G ` z 9 ” Î Ö N Þ / - ]
t ‚ ! ˆ ª È Ø á ò
) / > S b ! { s h z “ œ ¥ « À Ê ê )
-+ @ 5 K Š “ ¨ ½ µ Õ 7 ‹ D Ã ¦ ¯ · Æ Û * ä & V < “ ; ô Ù ’ Î Þ a c @ ó ¤ U ˜! ' î! ( " ?" , ^" - ‹" ¹" ×" í" ó" ù" # M %# s# {# 6 B & ) @ > C 1 E ? + 0 : 9 7 A . J 5 (
-+ " H G / I = < % - ! 2
D # ; F $ 4 * 8 , ' 3 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Changes in RSIBreak 0.5.0
-+
+In this version we have changed the way the timers work. Instead of indicating after how many tiny breaks you want a big break, you can now setup after how many minutes you want a bigbreak.
+Please review your current settings.
+
-+ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Here you can set how long one image should be shown before it is replaced by the next one. Here you can set how long the big break is. Here you can set how long the tiny break is. Here you can set how often you want a big break. One minute means 60 seconds of movement with the mouse or work on the keyboard Here you can set how often you want a tiny break. One minute means 60 seconds of movement with the mouse or work on the keyboard. Image Folder Path Last big break Last tiny break Lock desktop Logo and Icons Maintainer and Author Maximized Maximum idle period Number of skipped big breaks (idle) Number of skipped big breaks (user) Number of skipped tiny breaks (idle) Number of skipped tiny breaks (user) Packaging and help with related issues Pause Pause score Percentage of activity Popup RSIBreak Report Bug... Reset Reset the statistics Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended The timers have now been reset This is a percentage of activity, based on the seconds of activity vs. total time RSIBreak is running. This is an indication how well you bahaved with the brakes. This is the biggest period of inactivity measured while RSIBreak is running. This is the total amount of big breaks which are skipped because you where idle. This is the total amount of big breaks which you skipped. This is the total amount of big breaks. This is the total amount of time you did not use the keyboard or mouse. This is the total amount of time you used the keyboard or mouse. This is the total amount of tiny breaks This is the total amount of tiny breaks which are skipped because you where idle. This is the total amount of tiny breaks which you skipped. This is the total time RSIBreak is running. This way you can have a break now This will reset all statistics to zero. Is that what you want? Time Timer for the tiny break has now been reset Timings Tiny Breaks Tiny break every: Tiny breaks Total amount of big breaks Total amount of tiny breaks Total recorded time Total time being idle Total time of activity Try to prevent Repetitive Strain Injury by reminding a user to rest. Usage Statistics Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -10449,33 +9636,38 @@
+turn this function off. When the popup is shown, it can flash
+when there is activity detected. You
+can turn it off when you find it too
-+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. With this checkbox you indicate that you want to see when the timers are reset. This happens when you have been idle for a while. With this checkbox you indicate that you want to use idle detection. Unchecked RSIBreak will not reset the timers when you are idle for the duration of a break, but it will take into account the seconds you work/are idle. You are using KDE 3.3 or older, with this version of KDE, you can not change this shortcut. _: Arguments: hours, minutes both as you defined earlier
++%1 and %2 _: Arguments: minutes, seconds both as you defined earlier
++%1 and %2 _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
-+Take a break now _: minutes:seconds
++Take a break now _: Translate this as the longest plural form. This is used to calculate the width of window
++minutes _: Translate this as the longest plural form. This is used to calculate the width of window
++seconds _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: One minute
++%1:00 _n: One hour
++%n hours _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
-+PO-Revision-Date: 2006-02-20 16:37+0000
++Please relax for %n seconds _n: minute
++minutes _n: one minute
++%n minutes _n: one second
++%n seconds _n: second
++seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
++PO-Revision-Date: 2006-03-28 17:38+0100
+Last-Translator: José Nuno Coelho Pires <jncp at netcabo.pt>
+Language-Team: pt <kde-i18n-doc at kde.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
-+X-POFile-SpellExtra: RSIBreak ESC
-+ Iniciar &automaticamente o RSIBreak no arranque Modifi&car o Atalho... Modifi&car... &Cor: &Desactivar o atalho para ignorar Piscar em caso de acti&vidade T&ipo de letra: A&talho: &Usar a mensagem Interromper uma pausa Acerca do KDE Acerca do RSIBreak Autor Grandes Pausas Pausa grande a cada: Personali&zado Mudar as imagens a cada: Mudanças no RSIBreak 0.5.0
++X-POFile-SpellExtra: RSIBreak ESC Personali
++ Falta %1 até à próxima pausa grande Falta %1 até à próxima pausa pequena Iniciar &automaticamente o RSIBreak no arranque Modifi&car o Atalho... Modifi&car... &Cor: &Desactivar o atalho para ignorar Piscar em caso de acti&vidade T&ipo de letra: &Repor os relógios ao fim de um perÃodo de inactividade A&talho: Mo&strar quando os relógios forem reiniciados &Usar a mensagem 0 segundos Interromper uma pausa Acerca do KDE Acerca do RSIBreak Autor Grandes Pausas Pausa grande a cada: Pausas grandes Personali&zado Mudar as imagens a cada: Mudanças no RSIBreak 0.5.0
+
+Nesta versão, mudou-se a forma como funcionam os relógios. Em vez de indicar ao fim de quantas pausas pequenas terá uma pausa grande, poderá configurar ao fim de quantos minutos deseja fazer uma pausa grande.
+Por favor reveja a sua configuração global.
+
-+ Assinale esta opção para desactivar e esconder o botão para ignorar. Desta forma, poderá evitar saltar a pausa. Assinale esta opção para desactivar o atalho para ignorar. Desta forma, poderá evitar saltar a pausa. Configurar o RSIBreak... Contador Durante: Geral Configuração Geral &Esconder Esconder o botão para &ignorar Local da Pasta de Imagens Bloquear o ecrã Logótipo e Ãcones Manutenção e Autoria Maximizada Gestão de pacotes e ajuda com problemas relacionados Mensagem RSIBreak Comunicar um Erro... Continuar o RSIBreak Procurar recursivamente Seleccione aqui a cor a usar para o contador. Dado que este será apresentado no cimo das imagens, poderá querer configurá-lo com uma cor que seja visÃvel na maioria das imagens. Seleccione aqui o tipo de letra a usar para o contador. Seleccione aqui o atalho de teclado a usar para interromper a pausa. Seleccione a pasta onde deseja ver as imagens. Estas serão mostradas de forma aleatória durante as pausas. Será percorrida de forma recursiva se você o desejar... Ignorar Apresentação Suspender o RSIBreak Suspenso Desta forma, poderá fazer agora uma pausa Tempos Pequenas Pausas Pausa pequena a cada: Tenta evitar a Lesão por Tensão Repetitiva, recordando um utilizador para descansar. Bem-vindo Bem-vindo ao RSIBreak
++ Assinale esta opção para desactivar e esconder o botão para ignorar. Desta forma, poderá evitar saltar a pausa. Assinale esta opção para desactivar o atalho para ignorar. Desta forma, poderá evitar saltar a pausa. Configurar o RSIBreak... Contador Durante: Geral Configuração Geral &Esconder Esconder o botão para &ignorar Aqui poderá configurar a duração em que uma imagem deverá ser mostrada, antes de ser substituÃda pela seguinte. Aqui poderá configurar a duração das pausas grandes. Aqui poderá configurar a duração das pausas pequenas. Aqui poderá configurar com que frequência deseja uma pausa grande. Um minuto significa 60 segundos de movimento com o rato ou de trabalho no teclado. Aqui poderá configurar com que frequência deseja uma pausa pequena. Um minuto significa 60 segundos de movimento com o rato ou de trabalho no teclado. Local da Pasta de Imagens Última pausa grande Última pausa pequena Bloquear o ecrã Logótipo e Ãcones Manutenção e Autoria Maximizada PerÃodo máximo de inactividade Número de pausas grandes ignoradas (inactividade) Número de pausas grandes ignoradas (utilizador) Número de pausas pequenas ignoradas (inactividade) Número de pausas pequenas ignoradas (utilizador) Gestão de pacotes e ajuda com problemas relacionados Pausa Pausar a pontuação Percentagem de actividade Mensagem RSIBreak Comunicar um Erro... Reiniciar Limpar as estatÃsticas Continuar o RSIBreak Procurar recursivamente Seleccione aqui a cor a usar para o contador. Dado que este será apresentado no cimo das imagens, poderá querer configurá-lo com uma cor que seja visÃvel na maioria das imagens. Seleccione aqui o tipo de letra a usar para o contador. Seleccione aqui o atalho de teclado a usar para interromper a pausa. Seleccione a pasta onde deseja ver as imagens. Estas serão mostradas de forma aleatória durante as pausas. Será percorrida de forma recursiva se você o desejar... Ignorar Apresentação Suspender o RSIBreak Suspenso Os relógios foram agora reiniciados Esta é uma percentagem da activada, com base nos segundos de actividade vs. o tempo total de execução do RSIBreak. Esta é uma indicação de quão bem-comportado você foi. Este é o maior perÃodo de inactividade medido durante a execução do RSIBreak. Este é o número total de pausas grandes que foram ignoradas por ter estado inactivo. Este é o número total de pausas grandes que você ignorou. Este é o número total de pausas grandes. Esta é a quantidade total de tempo em que não usou o rato nem o teclado. Esta é a quantidade total de tempo em que usou o rato ou o teclado. Este é o número total de pausas pequenas Esta é a quantidade total de pausas pequenas que foram ignoradas por ter estado inactivo. Este é o número total de pausas pequenas que você ignorou. Este é o tempo total em que o RSIBreak está a correr. Desta forma, poderá fazer agora uma pausa Isto irá repor todas as suas estatÃsticas a zero. É o que pretende? Tempo O relógio para as pausas pequenas foi agora reiniciado Tempos Pequenas Pausas Pausa pequena a cada: Pausas pequenas Total de pausas grandes Total de pausas pequenas Tempo total registado Tempo total de inactividade Tempo total de actividade Tenta evitar a Lesão por Tensão Repetitiva, recordando um utilizador para descansar. EstatÃsticas de Utilização Bem-vindo Bem-vindo ao RSIBreak
+
+Na sua bandeja do sistema, poderá ver um relógio. Quando carregar com o botão direito do rato nele, poderá ver um menu, no qual poderá ir à configuração, por exemplo.
+Quando quiser saber quando é a próxima pausa, passe o cursor do rato sobre o Ãcone.
@@ -10487,94 +9679,30 @@
+e não a janela, desligue esta função. Quando for mostrada a mensagem, esta
+poderá piscar quando for detectada actividade.
+Podê-la-á desligar quando achar que é
-+demasiado incómoda. Com esta opção, poderá indicar se deseja ver um contador durante as pausas. Irá contar até zero, para que possa saber quanto irá durar esta pausa. Será apresentada no cimo da imagem, quando estas forem apresentadas. Com esta opção, poderá indicar se quer ver a mensagem a piscar quando ocorrer alguma actividade. Com esta opção, poderá indicar se deseja ver a mensagem, quando for a altura de fazer uma pausa. Irá contar até zero, para que possa saber quanto irá durar esta pausa. Será apresentada no cimo da imagem, quando estas forem apresentadas. Com esta opção, poderá indicar se quer o RSIBreak a iniciar quando o KDE arrancar. Faltam %1 até à próxima pausa grande Faltam %1 até à próxima pausa pequena jncp at netcabo.pt,morais at kde.org Faltam %1 e %2 até à próxima pausa grande Faltam %1 e %2 até à próxima pausa pequena José Nuno Pires,Pedro Morais Fazer uma pausa agora %1:%2 %1:00 Um minuto
++demasiado incómoda. Com esta opção, poderá indicar se deseja ver um contador durante as pausas. Irá contar até zero, para que possa saber quanto irá durar esta pausa. Será apresentada no cimo da imagem, quando estas forem apresentadas. Com esta opção, poderá indicar se quer ver a mensagem a piscar quando ocorrer alguma actividade. Com esta opção, poderá indicar se deseja ver a mensagem, quando for a altura de fazer uma pausa. Irá contar até zero, para que possa saber quanto irá durar esta pausa. Será apresentada no cimo da imagem, quando estas forem apresentadas. Com esta opção, poderá indicar se quer o RSIBreak a iniciar quando o KDE arrancar. Com esta opção, poderá indicar se quer ver quando os relógios são reiniciados. Isto acontece quando estiver inactivo durante algum tempo. Com esta opção, poderá indicar se quer usar a detecção de inactividade. Se estiver desligada, o RSIBreak não irá repor os relógios quando estiver inactivo durante a duração de uma pausa, mas terá em conta os segundos em que trabalhou/esteve inactivo. Você está a usar o KDE 3.3 ou anterior; com esta versão do KDE, não poderá alterar este atalho. %1 e %2 %1 e %2 jncp at netcabo.pt,morais at kde.org José Nuno Pires,Pedro Morais Fazer uma pausa agora minutos segundos %1:%2 %1:00 Uma hora
++%n horas Um minuto
+%n minutos Um segundo
+%n segundos Por favor, descanse durante 1 segundo
-+Por favor, descanse durante %n segundos minutos segundos
-\ Kein Zeilenumbruch am Dateiende.
---- po/sr/Makefile.in
-+++ po/sr/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/sr/Makefile
-+#>- $(AUTOMAKE) --foreign po/sr/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sr/Makefile
-+ $(AUTOMAKE) --foreign po/sr/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sr/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sr/Makefile
-+ $(AUTOMAKE) --foreign po/sr/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sr/Makefile.in
-
-
++Por favor, descanse durante %n segundos minuto
++ minutos um minuto
++%n minutos um segundo
++%n segundos segundo
++ segundos
+\ No newline at end of file
--- po/sr/rsibreak.gmo
+++ po/sr/rsibreak.gmo
@@ -0,0 +1,21 @@
-+Þ• ì % ¼ P
-+ Q \ d
-+ k
v „ Œ ¡ · ¿ Ç Ø Þ ð
ù $ D , q # y ! 9 ¿ ù B L
-+ _
-+ j u † % ¶ Ü õ
-+
) ( 7 ` " i Œ ¬ ¾ Ÿ Ñ q † ˜ ´ b o
-+
&Change... &Color: &Font: &Shortcut: Abort a break C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path RSIBreak Report Bug... Search recursively Slideshow Timings Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome _: EMAIL OF TRANSLATORS
++Þ• Ü % œ 0
++ 1 < D
++ K
V d l — Ÿ § ¸ ¾ Ð
Ù ç ú D Q # Y ! } 9 Ÿ B Ù
++ /
++ : E V p % † ¬ Å
++ Ò Ý
ù ( 0 " 9 \ | Ž Ÿ ¡ A V h „
++
&Change... &Color: &Font: &Shortcut: Abort a break C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path RSIBreak Report Bug... Search recursively Slideshow Timings Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
++Please relax for %n seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2005-11-17 15:27+0100
+Last-Translator: Slobodan Simic <simicsl at verat.net>
+Language-Team: Serbian <kde-yu at kde-yu.org>
@@ -10584,91 +9712,22 @@
+X-Generator: KBabel 1.10.2
+ &Промени... &Боја: &Фонт: &Пречица: Прекини паузу Произ&вољно Измени Ñлике Ñваких: ПодеÑи RSIBreak... Бројач Опште Опште поÑтавке &Сакриј Путања фаÑцикле Ñлике RSIBreak Пријавите грешку... Тражи рекурзивно Слајд-шоу Темпирања Покушај превенције повреда од понављајућих покрета подÑећањем кориÑника да Ñе одмори. Добродошли simicsl at verat.net Слободан Симић Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунду
+Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунде
-+Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунди минута Ñекунди
-\ Kein Zeilenumbruch am Dateiende.
---- po/sr at Latn/Makefile.in
-+++ po/sr at Latn/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr at Latn/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr at Latn/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/sr at Latn/Makefile
-+#>- $(AUTOMAKE) --foreign po/sr at Latn/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr at Latn/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr at Latn/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sr at Latn/Makefile
-+ $(AUTOMAKE) --foreign po/sr at Latn/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sr at Latn/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sr at Latn/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sr at Latn/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sr at Latn/Makefile
-+ $(AUTOMAKE) --foreign po/sr at Latn/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sr at Latn/Makefile.in
-
-
++Молим Ð²Ð°Ñ Ð´Ð° одморите %n Ñекунди
+\ No newline at end of file
--- po/sr at Latn/rsibreak.gmo
+++ po/sr at Latn/rsibreak.gmo
@@ -0,0 +1,21 @@
-+Þ• ì % ¼ P
-+ Q \ d
-+ k
v „ Œ ¡ · ¿ Ç Ø Þ ð
ù $ D , q # y ! 9 ¿ ù B L X _
-+ f
q Œ ¡ ´ ¼ Ã Ó Û ò û
-+ "
-+ - Z 8 “ Ÿ ± b Á $ +
-+
&Change... &Color: &Font: &Shortcut: Abort a break C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path RSIBreak Report Bug... Search recursively Slideshow Timings Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome _: EMAIL OF TRANSLATORS
++Þ• Ü % œ 0
++ 1 < D
++ K
V d l — Ÿ § ¸ ¾ Ð
Ù ç ú D Q # Y ! } 9 Ÿ B Ù ( /
++ 6
A O \ q „ Œ “ £ « Â Ë à
++ ò
++ ý Z c o b ‘
++
&Change... &Color: &Font: &Shortcut: Abort a break C&ustom Change images every: Configure RSIBreak... Counter General General Settings H&ide Image Folder Path RSIBreak Report Bug... Search recursively Slideshow Timings Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome _: EMAIL OF TRANSLATORS
+Your emails _: NAME OF TRANSLATORS
+Your names _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
++Please relax for %n seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2005-11-17 15:27+0100
+Last-Translator: Slobodan Simic <simicsl at verat.net>
+Language-Team: Serbian <kde-yu at kde-yu.org>
@@ -10678,99 +9737,32 @@
+X-Generator: KBabel 1.10.2
+ &Promeni... &Boja: &Font: &PreÄica: Prekini pauzu Proiz&voljno Izmeni slike svakih: Podesi RSIBreak... BrojaÄ OpÅ¡te OpÅ¡te postavke &Sakrij Putanja fascikle slike RSIBreak Prijavite greÅ¡ku... Traži rekurzivno Slajd-Å¡ou Tempiranja PokuÅ¡aj prevencije povreda od ponavljajućih pokreta podsećanjem korisnika da se odmori. DobrodoÅ¡li simicsl at verat.net Slobodan Simić Molim vas da odmorite %n sekundu
+Molim vas da odmorite %n sekunde
-+Molim vas da odmorite %n sekundi minuta sekundi
-\ Kein Zeilenumbruch am Dateiende.
---- po/sv/Makefile.in
-+++ po/sv/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sv/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sv/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/sv/Makefile
-+#>- $(AUTOMAKE) --foreign po/sv/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sv/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sv/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sv/Makefile
-+ $(AUTOMAKE) --foreign po/sv/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sv/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/sv/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/sv/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/sv/Makefile
-+ $(AUTOMAKE) --foreign po/sv/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/sv/Makefile.in
-
-
++Molim vas da odmorite %n sekundi
+\ No newline at end of file
--- po/sv/rsibreak.gmo
+++ po/sv/rsibreak.gmo
-@@ -0,0 +1,74 @@
-+Þ• J l e ¼ P ( Q z
-+ Ž ™ ¡ » Î
-+ Õ à
ï ý
-+ ( 9 A ÿ V c V [ º , 4 G O ` f x Š — ¦ ¼ & Æ í ó
ü
+@@ -0,0 +1,86 @@
++Þ• ~ ü °
++ ! ±
++ " Ó
++ ( ö
++
++ 3 > F ` s & z
++ ¡ ¬ È ×
á ï ù
++
++ + 6 > ÿ S c S
[ ·
) 1 D L ] c Z u + Ð , ü ) © + = L \ i x Ž ˜ # ¬ # Ð $ ô $ & > e k w Ž ”
« ± Æ Ö é , Š 7 · – ï † ‹ • ¦ ° f Ï ; 6 L r P ¿ 9 ' J G r @ º ' û Q # : u + ° ! Ü > þ = + B n v ‚ ” » × ë D ] n ý v Ù t { N Õ Ê ^ Ÿ ÿ T Ÿ ô Ý v [ T B ° D ó # 8 ! \ > ~ c ½ c ! … ž · Í ç 9 ! ;! N! h! ‚! F •! & Ü" % # $ )# N#
++ f# q# + y# ¥#
»# % É# ï# þ# $
++ 7$ B$ Q$ X$
++ d$
o$ }$
$ $ £$ & ¶$ „ Ý% „ b& ç& û& ' ' ' 3' :' Q U' 7 §' 6 ß' ˆ ( ˆ Ÿ( () B) V) i) x) ‹) ¥) ¯) + Ç) - ó) * !* , L* + y* ¥* ª* ¬* Ä* ×* à*
++ ò* ý* + &+ ¯ 5+ 3 å+ ? , ~ Y, Ø, ä, í, -
++- ƒ &- = ª- V è- Z ?. = š. ( Ø. L / G N/ & –/ Y ½/ < 0 1 T0 $ †0 ? «0 ë0 + ï0 1 !1 .1 ?1 L1 g1 1 —1 °1 P È1 2
++ /2 ý :2 ñ 83 ‹ *4 Ç ¶4 l ~5 › ë5 Y ‡6 ~ á6 `7 ` l8 Í8 ×8 á8 ü8
9 9 #9 ,9 29 89 K9 _9 4 u9
ª9 ¸9 Ì9 â9 ! D : 1 3 k n z w j N c . R o ] q 6 J 9 K ^ & d < F Q M - Z ' ) \ s y
++ $ A 4 x L H } f E l p b a % u 0 + [ " / ~ , _ 5 P X ? { Y U ` B @ S G ( i * 8 r | h e I ; = T 7 C > t g 2 O V W v m #
%1 remaining until next big break %1 remaining until next tiny break &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Reset timers after period of idleness &Shortcut: &Show when timers are reset &Use the popup 0 seconds Abort a break About KDE About RSIBreak Author Big Breaks Big break every: Big breaks C&ustom Change images every: Changes in RSIBreak 0.5.0
+
-+
-+ -
-+ , Î
-+ 7 û
-+ – 3 Ê Ï Ù ê ! ô * D < ý ‰ Ù ‡
{ a Õ Ý ^ ³ Ÿ T ² ^ _ f # Æ p ê q [ ! Í > ï . G ` z 9 ” Î Ö F Þ $ % J
-+ b m + u ¡
· Å Ô ð ÿ
-+
+ = C & V „ } „ ‡ › ¤ ± º Ó Ú õ 1 K + U ” ¯ Ã ¯ Ò 3 ‚ ? ¶ ~ ö u Š $ § Ì Ò ß P ð
-+ A ý L ñ J ‹ < Ç È l › ý Y ™ & ó % ! @! - [! , ‰! ¶!
Ç! Õ! Û! á! õ! 4 " @" H" 6 B & ) @ > C 1 E ? + 0 : 9 7 A . J 5 (
-+ " H G / I = < % - ! 2
D # ; F $ 4 * 8 , ' 3 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Flash on activity &Font: &Shortcut: &Use the popup Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Changes in RSIBreak 0.5.0
-+
+In this version we have changed the way the timers work. Instead of indicating after how many tiny breaks you want a big break, you can now setup after how many minutes you want a bigbreak.
+Please review your current settings.
+
-+ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues Popup RSIBreak Report Bug... Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended This way you can have a break now Timings Tiny Breaks Tiny break every: Try to prevent Repetitive Strain Injury by reminding a user to rest. Welcome Welcome to RSIBreak
++ Check this option to disable and hide the skip button. This way you can prevent skipping the break. Check this option to disable the skip shortcut.This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Here you can set how long one image should be shown before it is replaced by the next one. Here you can set how long the big break is. Here you can set how long the tiny break is. Here you can set how often you want a big break. One minute means 60 seconds of movement with the mouse or work on the keyboard Here you can set how often you want a tiny break. One minute means 60 seconds of movement with the mouse or work on the keyboard. Image Folder Path Last big break Last tiny break Lock desktop Logo and Icons Maintainer and Author Maximized Maximum idle period Number of skipped big breaks (idle) Number of skipped big breaks (user) Number of skipped tiny breaks (idle) Number of skipped tiny breaks (user) Packaging and help with related issues Pause Pause score Percentage of activity Popup RSIBreak Report Bug... Reset Reset the statistics Resume RSIBreak Search recursively Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended The timers have now been reset This is a percentage of activity, based on the seconds of activity vs. total time RSIBreak is running. This is an indication how well you bahaved with the brakes. This is the biggest period of inactivity measured while RSIBreak is running. This is the total amount of big breaks which are skipped because you where idle. This is the total amount of big breaks which you skipped. This is the total amount of big breaks. This is the total amount of time you did not use the keyboard or mouse. This is the total amount of time you used the keyboard or mouse. This is the total amount of tiny breaks This is the total amount of tiny breaks which are skipped because you where idle. This is the total amount of tiny breaks which you skipped. This is the total time RSIBreak is running. This way you can have a break now This will reset all statistics to zero. Is that what you want? Time Timer for the tiny break has now been reset Timings Tiny Breaks Tiny break every: Tiny breaks Total amount of big breaks Total amount of tiny breaks Total recorded time Total time being idle Total time of activity Try to prevent Repetitive Strain Injury by reminding a user to rest. Usage Statistics Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
@@ -10783,33 +9775,38 @@
+turn this function off. When the popup is shown, it can flash
+when there is activity detected. You
+can turn it off when you find it too
-+intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
++intrusive. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup flash when there is activity. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. With this checkbox you indicate that you want to see when the timers are reset. This happens when you have been idle for a while. With this checkbox you indicate that you want to use idle detection. Unchecked RSIBreak will not reset the timers when you are idle for the duration of a break, but it will take into account the seconds you work/are idle. You are using KDE 3.3 or older, with this version of KDE, you can not change this shortcut. _: Arguments: hours, minutes both as you defined earlier
++%1 and %2 _: Arguments: minutes, seconds both as you defined earlier
++%1 and %2 _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: This is where the user can request a break
-+Take a break now _: minutes:seconds
++Take a break now _: Translate this as the longest plural form. This is used to calculate the width of window
++minutes _: Translate this as the longest plural form. This is used to calculate the width of window
++seconds _: minutes:seconds
+%1:%2 _: minutes:seconds
-+%1:00 _n: One minute
++%1:00 _n: One hour
++%n hours _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
-+PO-Revision-Date: 2006-02-20 19:20+0100
++Please relax for %n seconds _n: minute
++minutes _n: one minute
++%n minutes _n: one second
++%n seconds _n: second
++seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
++PO-Revision-Date: 2006-03-28 18:32+0200
+Last-Translator: Stefan Asserhäll <stefan.asserhall at comhem.se>
+Language-Team: Swedish <sv at li.org>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.11.2
-+ Kör &automatiskt RSIbreak vid start Ä&ndra snabbtangent... Ä&ndra... &Färg: &Inaktivera snabbtangent för överhoppning &Blinka vid aktivitet &Teckensnitt: &Snabbtangent: An&vänd meddelandefönster Avbryt en rast Om KDE Om RSIbreak Upphovsman Långa raster Lång rast efter: E&gen Ändra bilder var: Ändringar i RSIbreak 0.5.0
++ %1 återstår innan nästa långa rast %1 återstår innan nästa korta rast Kör &automatiskt RSIbreak vid start Ä&ndra snabbtangent... Ä&ndra... &Färg: &Inaktivera snabbtangent för överhoppning &Blinka vid aktivitet &Teckensnitt: &Nollställ tid efter overksam period &Snabbtangent: Vi&sa när tider nollställs An&vänd meddelandefönster 0 sekunder Avbryt en rast Om KDE Om RSIbreak Upphovsman Långa raster Lång rast efter: Långa raster E&gen Ändra bilder var: Ändringar i RSIbreak 0.5.0
+
+Sättet som tidtagning fungerar har ändrats i denna version. Istället för att ange efter hur många korta raster du vill ha en lång rast, kan du nu ställa in efter hur många minuter du vill ha en lång rast.
+Kontrollera gärna dina nuvarande inställningar.
+
-+ Markera alternativet för att inaktivera och dölja överhoppningsknappen. På så sätt kan du förhindra att en rast hoppas över. Markera alternativet för att inaktivera snabbknappen för att hoppa över. På så sätt kan du förhindra att rasten hoppas över. Anpassa RSIbreak... Räknare Under tiden: Allmänt Allmänna inställningar &Dölj Dölj över&hoppningsknapp Sökväg till bildkatalog Lås skrivbord Logotyp och ikoner Utvecklare och upphovsman Maximerad Paketering och hjälp med besläktade saker Meddelandefönster RSIbreak Rapportera fel... Återuppta RSIbreak Sök rekursivt Välj färgen att använda för räknaren här. Eftersom den används ovanpå bilderna, kan du nog vilja ställa in den till en färg som är synlig med de flesta av bilderna. Välj teckensnitt att använda för räknaren här. Välj snabbtangenten att använda för att avbryta rasten här. Välj katalogen du vill se bilder från. Bilderna visas slumpmässigt under rasterna. Den söks igenom rekursivt om du vill... Hoppa över Bildspel Stäng av RSIbreak Avstängt På detta sätt kan du ta en rast nu Tider Korta raster Kort rast efter: Försök förhindra belastningsskador genom att påminna användare om att vila. Välkommen Välkommen till RSIbreak
++ Markera alternativet för att inaktivera och dölja överhoppningsknappen. På så sätt kan du förhindra att en rast hoppas över. Markera alternativet för att inaktivera snabbknappen för att hoppa över. På så sätt kan du förhindra att rasten hoppas över. Anpassa RSIbreak... Räknare Under tiden: Allmänt Allmänna inställningar &Dölj Dölj över&hoppningsknapp Här kan du ställa in hur länge en bild ska visas innan den ersätts av nästa. Här kan du ställa in hur lång den långa rasten är. Här kan du ställa in hur lång den korta rasten är. Här kan du ställa in hur ofta du vill ha en lång rast. En minut betyder 60 sekunders rörelse av musen eller arbete med tangentbordet Här kan du ställa in hur ofta du vill ha en kort rast. En minut betyder 60 sekunders rörelse av musen eller arbete med tangentbordet. Sökväg till bildkatalog Senaste långa rast Senaste korta rast Lås skrivbord Logotyp och ikoner Utvecklare och upphovsman Maximerad Maximal overksam period Antal överhoppade långa raster (overksam) Antal överhoppade långa raster (användare) Antal överhoppade korta raster (overksam) Antal överhoppade korta raster (användare) Paketering och hjälp med besläktade saker Paus g Aktivitetens procenttal Meddelandefönster RSIbreak Rapportera fel... Nollställ Nollställ statistik Återuppta RSIbreak Sök rekursivt Välj färgen att använda för räknaren här. Eftersom den används ovanpå bilderna, kan du nog vilja ställa in den till en färg som är synlig med de flesta av bilderna. Välj teckensnitt att använda för räknaren här. Välj snabbtangenten att använda för att avbryta rasten här. Välj katalogen du vill se bilder från. Bilderna visas slumpmässigt under rasterna. Den söks igenom rekursivt om du vill... Hoppa över Bildspel Stäng av RSIbreak Avstängt Tiderna har nu nollställts Det här är procentuell aktivitet, baserad på antal sekunders aktivitet i förhållande till den totala tiden som RSIbreak kört. Det här är en indikation på hur bra du hanterade rasterna. Det här är den längsta perioden utan aktivitet som mätts upp medan RSIbreak kört. Det här är det totala antalet långa raster som hoppades över eftersom du var overksam. Det här är totalt antal långa raster som du hoppade över. Det här är totalt antal långa raster. Det här är den totala tiden som du inte använt tangentbordet eller musen. Det här är den totala tiden som du använt tangentbordet eller musen. Det här är totalt antal korta raster Det här är det totala antalet korta raster som hoppades över eftersom du var overksam. Det här är totalt antal korta raster som du hoppade över. Det här är den totala tiden som RSIbreak kört. På detta sätt kan du ta en rast nu Det här nollställer all statistik. Är det vad du vill göra? Tid Tiden för korta raster har nu nollställts Tider Korta raster Kort rast efter: Korta raster Totalt antal långa raster Totalt antal korta raster Total registrerad tid Total tid utan aktivitet Total tid med aktivitet Försök förhindra belastningsskador genom att påminna användare om att vila. Användningsstatistik Välkommen Välkommen till RSIbreak
+
+Du ser nu en klocka i systembrickan. När du högerklickar på den ser du en meny där du till exempel kan visa inställningarna.
+Om du vill veta när nästa rast är, håll musen över ikonen.
@@ -10822,108 +9819,42 @@
+funktionen. När meddelandefönstret visas kan det
+blinka när aktivitet detekteras. Du kan
+stänga av det om du tycker att det är
-+för påträngande. Du kan ange om du vill se en räknare under rasterna med den här kryssrutan. Den räknar ner till noll, så att du vet hur lång rasten kommer att bli. Den visas ovanpå bilderna, när bilder visas. Du kan ange om du vill att meddelandefönstret ska blinka när aktivitet inträffar med den här kryssrutan. Du kan ange om du vill se ett meddelandefönster när det är dags för en rast. Den räknar ner till noll, så att du vet hur lång rasten kommer att bli. Du kan ange att du vill att RSIbreak ska köras när KDE startas med den här kryssrutan. %1 återstår innan nästa långa rast %1 återstår innan nästa korta rast stefan.asserhall at comhem.se %1 och %2 återstår innan nästa långa rast %1 och %2 återstår innan nästa korta rast Stefan Asserhall Ta en rast nu %1:%2 %1:00 En minut
++för påträngande. Du kan ange om du vill se en räknare under rasterna med den här kryssrutan. Den räknar ner till noll, så att du vet hur lång rasten kommer att bli. Den visas ovanpå bilderna, när bilder visas. Du kan ange om du vill att meddelandefönstret ska blinka när aktivitet inträffar med den här kryssrutan. Du kan ange om du vill se ett meddelandefönster när det är dags för en rast. Den räknar ner till noll, så att du vet hur lång rasten kommer att bli. Du kan ange att du vill att RSIbreak ska köras när KDE startas med den här kryssrutan. Du kan ange om du vill se när tiderna nollställs med den här kryssrutan. Det inträffar när du har varit inaktiv en stund. Du kan ange att du vill att RSIbreak ska använda detektering av inaktivitet med den här kryssrutan. Om kryssrutan inte är markerad, nollställer inte RSIbreak tiden när du är overksam under en hel rast, men sekunderna du arbetar eller är ledig tas hänsyn till. Du använder KDE 3.3 eller tidigare. Med den här versionen av KDE kan du inte ändra genvägen. %1 och %2 %1 och %2 stefan.asserhall at comhem.se Stefan Asserhall Ta en rast nu minuter sekunder %1:%2 %1:00 En timma
++%n timmar En minut
+%n minuter En sekund
+%n sekunder Koppla av under 1 sekund
-+Koppla av under %n sekunder minuter sekunder
-\ Kein Zeilenumbruch am Dateiende.
---- po/tr/Makefile.in
-+++ po/tr/Makefile.in
-@@ -194,6 +194,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -340,7 +343,7 @@
- all: all-nls docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -349,9 +352,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/tr/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/tr/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu po/tr/Makefile
-+#>- $(AUTOMAKE) --foreign po/tr/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -361,9 +364,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/tr/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/tr/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/tr/Makefile
-+ $(AUTOMAKE) --foreign po/tr/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/tr/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -378,9 +381,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -726,9 +729,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/tr/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/tr/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu po/tr/Makefile
-+ $(AUTOMAKE) --foreign po/tr/Makefile
- cd $(top_srcdir) && perl admin/am_edit po/tr/Makefile.in
-
-
++Koppla av under %n sekunder minut
++minuter en minut
++%n minuter en sekund
++%n sekunder sekund
++sekunder
+\ No newline at end of file
--- po/tr/rsibreak.gmo
+++ po/tr/rsibreak.gmo
-@@ -0,0 +1,38 @@
-+Þ• > S ü H ( I r
-+ † ‘ ™ ³
-+ º
Å Ó Ý ì
-+ ó þ c , ¦ ® Á É Ú à ò 6 & @ g
p ~ Ž , / 7 \ – ” + 0 : K U ] i { ý ƒ Õ
-+ Ÿ W T ÷ ^ L _ « #
p /
q
! 4 M f € 9 š Ô Ü 7 ä 0 M f u |
-+ © ´
Å Ó æ ì ü ~ ; º Ê
Ñ ß
å ó ú 5 F N % _ … Ž ž ¯ § 6 W 9 Ž r È ; @ Q
-+ X c s €
š . ¨ ¶ × Ž j – ! " D & V ' } ¥ ² ¸ ¾ È # Ò ö ý
-+ & 1 / % : - > + * 0 ! 4 8 ,
' 3 = 5 2 ( # " $ ; ) . 9 6 < 7 &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Font: &Shortcut: Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Check this option to disable and hide the skip button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues RSIBreak Report Bug... Resume RSIBreak Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended Timings Tiny Breaks Tiny break every: Welcome Welcome to RSIBreak
+@@ -0,0 +1,36 @@
++Þ• 8 Ü O œ Ø ( Ù
++ ! ) C
++ J
U c m |
++ ƒ Ž Ÿ § c ¼ 6 > Q Y j p ‚ ” ¡ ° Æ & Ð ÷
, ¿ 7 ì – $ » À Ê Û å í ù ý Õ
++ Ÿ ç
++ T ‡ # Ü ! " ; T n 9 ˆ 7 Â 0 ú
+ D S Z {
++ ‡ ’
£ ± Ä Ê Ú ó ú ~ ˜ ¨
¯ ½
Ã Ñ Ø ð ý $ , % = c l | ¯ … 6 5 9 l r ¦ /
++ 6 A Q ^
x . † ¶ µ l j t ß ñ þ
++ # ) 8
( 2 0 ' . 5 1 # 4 $ 7 ! - 6 " 3 / + * &
++ , % &Automatically start RSIBreak at startup &Change Shortcut... &Change... &Color: &Disable shortcut to skip &Font: &Shortcut: Abort a break About KDE About RSIBreak Author Big Breaks Big break every: C&ustom Change images every: Check this option to disable and hide the skip button. This way you can prevent skipping the break. Configure RSIBreak... Counter For a duration of: General General Settings H&ide H&ide skip button Image Folder Path Lock desktop Logo and Icons Maintainer and Author Maximized Packaging and help with related issues RSIBreak Report Bug... Resume RSIBreak Select here the color to use for the counter. As this is used on top of the images, you might want to set it to a color which is visible for most of the images. Select here the font to use for the counter. Select here the shortcut to use for aborting the break. Select the folder from which you want to see images. These images are randomly shown during the breaks. It will be searched recursively if you want... Skip Slideshow Suspend RSIBreak Suspended Timings Tiny Breaks Tiny break every: Welcome Welcome to RSIBreak
+
+In your tray you can now see a clock. When you right-click on that you will see a menu, from which you can go to the configuration for example.
+When you want to know when the next break is, hover over the icon.
+
-+Use RSIBreak wisely. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next big break _: Argument: seconds part or minutes part as defined earlier
-+%1 remaining until next tiny break _: EMAIL OF TRANSLATORS
-+Your emails _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next big break _: First argument: minutes, second: seconds both as you defined earlier
-+%1 and %2 remaining until next tiny break _: NAME OF TRANSLATORS
++Use RSIBreak wisely. With this checkbox you can indicate if you want to see a counter during the breaks. It will count down to zero, so you know how long this break will be. It will be shown on top of the image, when images are shown. With this checkbox you can indicate if you want to see the popup when it is time to break. It will count down to zero, so you know how long this break will be. With this checkbox you can indicate that you want RSIBreak to start when KDE starts. _: EMAIL OF TRANSLATORS
++Your emails _: NAME OF TRANSLATORS
+Your names _: minutes:seconds
+%1:%2 _: minutes:seconds
+%1:00 _n: One minute
+%n minutes _n: One second
+%n seconds _n: Please relax for 1 second
-+Please relax for %n seconds minutes seconds Project-Id-Version: rsibreak
-+POT-Creation-Date: 2006-02-20 11:19+0100
++Please relax for %n seconds Project-Id-Version: rsibreak
++POT-Creation-Date: 2006-04-01 10:58+0200
+PO-Revision-Date: 2006-02-19 22:23+0200
+Last-Translator: Ahmet AYGÃœN <ahmet at kivi.com.tr>
+Language-Team: Türkçe <tr at li.org>
@@ -10936,162 +9867,5 @@
+Şimdi sistem tepsiniz içinde bir saat görebilirsiniz. Saate sağ tıklayarak yapabileceğiniz işlemleri görebilirsiniz.
+Sonraki molanın ne zaman olacağını bilmek isterseniz farenizi saatin üzerinde biraz bekletmeniz yeterli.
+
-+Sağlığınız için RSIBreak kullanın. Bu kutucuğu işaretlerseniz mola süresince ekranınızda ufak bir sayaç görünmesini sağlarsınız. Sayaç mola süresinden sıfıra doğru geri sayarak sizi bilgilendirecektir. Molalar boyunca eğer bir sayaç görmek istiyorsanız bu onay kutusu ile imleyebilirsiniz. Bu sıfıra doğru geriye sayacaktır, bu yüzden kesmenin ne kadar uzunlukta olacağını bilirsiniz. Resimler gösterildiği zaman, bu resmin üzerinde gösterilecektir. Bu kutucuğu işaretlerseniz KDE başladığı anda otomatik olarak RSIBreak çalışmaya başlayacaktır. Sonraki büyük molaya %1 kaldı Sonraki küçük molaya %1 kaldı ahmet at zion.gen.tr Sonraki büyük molaya %1 ve %2 kaldı Sonraki küçük molaya %1 ve %2 kaldı Ahmet AYGÜN %1:%2 %1:00 %n dakika %n saniye Lütfen %n saniye için rahatlayın dakika saniye
-\ Kein Zeilenumbruch am Dateiende.
---- rsibreak/Makefile.in
-+++ rsibreak/Makefile.in
-@@ -193,6 +193,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -332,7 +335,7 @@
- all: docs-am all-recursive
-
- .SUFFIXES:
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/../admin/Doxyfile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../admin/Doxyfile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -341,9 +344,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu rsibreak/Makefile
-+#>- $(AUTOMAKE) --foreign rsibreak/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -353,9 +356,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu rsibreak/Makefile
-+ $(AUTOMAKE) --foreign rsibreak/Makefile
- cd $(top_srcdir) && perl admin/am_edit rsibreak/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -370,9 +373,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
- mostlyclean-libtool:
-@@ -768,9 +771,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu rsibreak/Makefile
-+ $(AUTOMAKE) --foreign rsibreak/Makefile
- cd $(top_srcdir) && perl admin/am_edit rsibreak/Makefile.in
-
-
---- rsibreak/src/Makefile.in
-+++ rsibreak/src/Makefile.in
-@@ -72,8 +72,7 @@
- @KDE_USE_FINAL_FALSE at rsibreak_OBJECTS = $(rsibreak_nofinal_OBJECTS)
- @KDE_USE_FINAL_TRUE at rsibreak_OBJECTS = $(rsibreak_final_OBJECTS)
- am__DEPENDENCIES_1 =
--rsibreak_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
-- $(am__DEPENDENCIES_1)
-+rsibreak_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
- DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
- depcomp = $(SHELL) $(top_srcdir)/admin/depcomp
- am__depfiles_maybe = depfiles
-@@ -236,6 +235,9 @@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBOBJS = @LTLIBOBJS@
-+MAINT = @MAINT@
-+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
-@@ -393,7 +395,7 @@
- setupmaximized.cpp rsitooltip.cpp dcopiface.cpp dcopiface_skel.cpp
-
- rsibreak_LDFLAGS = $(KDE_RPATH) $(all_libraries)
--rsibreak_LDADD = $(LIB_KDEUI) $(LIB_KIO) $(LIBXSS)
-+rsibreak_LDADD = $(LIB_KDEUI) $(LIB_KIO) -lXss
-
- # this is where the desktop file will go
- xdg_apps_DATA = rsibreak.desktop
-@@ -405,7 +407,7 @@
-
- .SUFFIXES:
- .SUFFIXES: .cpp .lo .o .obj
--$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/../../admin/Doxyfile.am $(am__configure_deps)
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../../admin/Doxyfile.am $(am__configure_deps)
- #>- @for dep in $?; do \
- #>- case '$(am__configure_deps)' in \
- #>- *$$dep*) \
-@@ -414,9 +416,9 @@
- #>- exit 1;; \
- #>- esac; \
- #>- done; \
--#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/src/Makefile'; \
-+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/src/Makefile'; \
- #>- cd $(top_srcdir) && \
--#>- $(AUTOMAKE) --gnu rsibreak/src/Makefile
-+#>- $(AUTOMAKE) --foreign rsibreak/src/Makefile
- #>+ 12
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
-@@ -426,9 +428,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/src/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/src/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu rsibreak/src/Makefile
-+ $(AUTOMAKE) --foreign rsibreak/src/Makefile
- cd $(top_srcdir) && perl admin/am_edit rsibreak/src/Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-@@ -443,9 +445,9 @@
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
--$(top_srcdir)/configure: $(am__configure_deps)
-+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
--$(ACLOCAL_M4): $(am__aclocal_m4_deps)
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
- install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
-@@ -992,9 +994,9 @@
- exit 1;; \
- esac; \
- done; \
-- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu rsibreak/src/Makefile'; \
-+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rsibreak/src/Makefile'; \
- cd $(top_srcdir) && \
-- $(AUTOMAKE) --gnu rsibreak/src/Makefile
-+ $(AUTOMAKE) --foreign rsibreak/src/Makefile
- cd $(top_srcdir) && perl admin/am_edit rsibreak/src/Makefile.in
-
-
++Sağlığınız için RSIBreak kullanın. Bu kutucuğu işaretlerseniz mola süresince ekranınızda ufak bir sayaç görünmesini sağlarsınız. Sayaç mola süresinden sıfıra doğru geri sayarak sizi bilgilendirecektir. Molalar boyunca eğer bir sayaç görmek istiyorsanız bu onay kutusu ile imleyebilirsiniz. Bu sıfıra doğru geriye sayacaktır, bu yüzden kesmenin ne kadar uzunlukta olacağını bilirsiniz. Resimler gösterildiği zaman, bu resmin üzerinde gösterilecektir. Bu kutucuğu işaretlerseniz KDE başladığı anda otomatik olarak RSIBreak çalışmaya başlayacaktır. ahmet at zion.gen.tr Ahmet AYGÜN %1:%2 %1:00 %n dakika %n saniye Lütfen %n saniye için rahatlayın
+\ No newline at end of file
More information about the pkg-kde-commits
mailing list