[pkg-kolab] r147 - trunk/kolab-cyrus-imapd/debian
Steffen Joeris
white-guest at costa.debian.org
Fri Jan 13 12:31:19 UTC 2006
Author: white-guest
Date: 2006-01-13 12:31:19 +0000 (Fri, 13 Jan 2006)
New Revision: 147
Modified:
trunk/kolab-cyrus-imapd/debian/imapd.conf
Log:
* use manager as admin
Modified: trunk/kolab-cyrus-imapd/debian/imapd.conf
===================================================================
--- trunk/kolab-cyrus-imapd/debian/imapd.conf 2006-01-13 12:08:24 UTC (rev 146)
+++ trunk/kolab-cyrus-imapd/debian/imapd.conf 2006-01-13 12:31:19 UTC (rev 147)
@@ -6,32 +6,32 @@
configdirectory: /var/lib/cyrus
# Which partition to use for default mailboxes
-#defaultpartition: default
+defaultpartition: default
partition-default: /var/spool/cyrus/mail
# News setup
-#partition-news: /var/spool/cyrus/news
-#newsspool: /var/spool/news
+partition-news: /var/spool/cyrus/news
+newsspool: /var/spool/news
# Alternate namespace
# If enabled, activate the alternate namespace as documented in
# /usr/share/doc/cyrus22-doc/html/altnamespace.html, where an user's
# subfolders are in the same level as the INBOX
# See also userprefix and sharedprefix on imapd.conf(5)
-#altnamespace: no
+altnamespace: no
# UNIX Hierarchy Convention
# Set to yes, and cyrus will accept dots in names, and use the forward
# slash "/" to delimit levels of the hierarchy. This is done by converting
# internally all dots to "^", and all "/" to dots. So the "rabbit.holes"
# mailbox of user "helmer.fudd" is stored in "user.elmer^fud.rabbit^holes"
-unixhierarchysep: yes
+unixhierarchysep: no
# Rejecting illegal characters in headers
# Headers of RFC2882 messages must not have characters with the 8th bit
# set. However, too many badly-written MUAs generate this, including most
# spamware. Enable this to reject such messages.
-reject8bit: no
+#reject8bit: yes
# Munging illegal characters in headers
# Headers of RFC2882 messages must not have characters with the 8th bit
@@ -49,7 +49,7 @@
# Uncomment the following and add the space-separated users who
# have admin rights for all services.
-admins: cyrus
+admins: manager
# Space-separated list of users that have lmtp "admin" status (i.e. that
# can deliver email through TCP/IP lmtp) in addition to those in the
@@ -80,18 +80,15 @@
allowanonymouslogin: no
# Minimum time between POP mail fetches in minutes
-#popminpoll: 1
+popminpoll: 1
# If nonzero, normal users may create their own IMAP accounts by creating
# the mailbox INBOX. The user's quota is set to the value if it is positive,
# otherwise the user has unlimited quota.
-autocreatequota: 10000
-quotawarn: 90
-timeout: 30
-allowusermoves: no
+autocreatequota: 0
# umask used by Cyrus programs
-#umask: 077
+umask: 077
# Sendmail binary location
# DUE TO A BUG, Cyrus sends CRLF EOLs to this program. This breaks Exim 3.
@@ -99,15 +96,12 @@
# /usr/sbin/sendmail -dropcr instead if you use Exim 3.
#sendmail: /usr/sbin/sendmail
-#Settings for tempdir
-temp_path: /var/tmp
-
# If enabled, cyrdeliver will look for Sieve scripts in user's home
# directories: ~user/.sieve.
-#sieveusehomedir: false
+sieveusehomedir: false
# If sieveusehomedir is false, this directory is searched for Sieve scripts.
-#sievedir: /var/spool/sieve
+sievedir: /var/spool/sieve
# notifyd(8) method to use for "MAIL" notifications. If not set, "MAIL"
# notifications are disabled. Valid methods are: null, log, zephyr
@@ -128,7 +122,7 @@
# If enabled, the partitions will also be hashed, in addition to the hashing
# done on configuration directories. This is recommended if one partition has a
# very bushy mailbox tree.
-#hashimapspool: true
+hashimapspool: true
# Allow plaintext logins by default (SASL PLAIN)
allowplaintext: yes
@@ -137,7 +131,7 @@
# (you need to uncomment this if you are not using an auxprop-based SASL
# mechanism. saslauthd users, that means you!). And pay attention to
# sasl_minimum_layer and allowapop below, too.
-sasl_mech_list: PLAIN
+#sasl_mech_list: PLAIN
# Allow use of the POP3 APOP authentication command.
# Note that this command requires that the plaintext passwords are
@@ -190,7 +184,7 @@
#
# Do note that, since sasl will be run as user cyrus, you may have a lot of
# trouble to set this up right.
-sasl_pwcheck_method: saslauthd
+sasl_pwcheck_method: auxprop
# What auxpropd plugins to load, if using sasl_pwcheck_method: auxprop
# by default, all plugins are tried (which is probably NOT what you want).
@@ -198,7 +192,7 @@
# If enabled, the SASL library will automatically create authentication secrets
# when given a plaintext password. Refer to SASL documentation
-#sasl_auto_transition: no
+sasl_auto_transition: no
#
# SSL/TLS Options
@@ -251,16 +245,16 @@
#tls_ca_file: /etc/ssl/certs/cyrus-imapd-ca.pem
# Path to directory with certificates of CAs.
-#tls_ca_path: /etc/ssl/certs
+tls_ca_path: /etc/ssl/certs
# The length of time (in minutes) that a TLS session will be cached for later
# reuse. The maximum value is 1440 (24 hours), the default. A value of 0 will
# disable session caching.
-#tls_session_timeout: 1440
+tls_session_timeout: 1440
# The list of SSL/TLS ciphers to allow. The format of the string is described
# in ciphers(1). THIS DISABLES THE WEAK 'FOR EXPORT' CRAP!
-#tls_cipher_list: TLSv1:SSLv3:SSLv2:!NULL:!EXPORT:!DES:!LOW:@STRENGTH
+tls_cipher_list: TLSv1:SSLv3:SSLv2:!NULL:!EXPORT:!DES:!LOW:@STRENGTH
# Require a client certificate for ALL services (imap, pop3, lmtp, sieve).
#tls_require_cert: false
@@ -297,13 +291,13 @@
lmtpsocket: /var/run/cyrus/socket/lmtp
# Unix domain socket that idled listens on.
-#idlesocket: /var/run/cyrus/socket/idle
+idlesocket: /var/run/cyrus/socket/idle
# Unix domain socket that the new mail notification daemon listens on.
-#notifysocket: /var/run/cyrus/socket/notify
+notifysocket: /var/run/cyrus/socket/notify
# Syslog prefix. Defaults to cyrus (so logging is done as cyrus/imap etc.)
-#syslog_prefix: cyrus
+syslog_prefix: cyrus
##
## DEBUGGING
More information about the pkg-kolab-devel
mailing list