[pkg-kolab] r649 - in kolabd/trunk: . debian/patches templates

Wed Jul 25 19:32:22 UTC 2007

Author: petere
Date: 2007-07-25 19:32:22 +0000 (Wed, 25 Jul 2007)
New Revision: 649

Added:
   kolabd/trunk/templates/
   kolabd/trunk/templates/imapd.conf.template.in
Modified:
   kolabd/trunk/debian/patches/10-dist_conf.dpatch
Log:
Make imapd.conf template consistent with kolab-cyrus-imapd package.


Modified: kolabd/trunk/debian/patches/10-dist_conf.dpatch
===================================================================

--- kolabd/trunk/debian/patches/10-dist_conf.dpatch	2007-07-23 10:47:25 UTC (rev 648)
+++ kolabd/trunk/debian/patches/10-dist_conf.dpatch	2007-07-25 19:32:22 UTC (rev 649)
@@ -4,9 +4,9 @@
 ## DP: Adjusts some paths
 
 @DPATCH@
-diff -urNad kolabd-2.1.0-20070510.dfsg.obsolete.0.331772574762912~/dist_conf/debian kolabd-2.1.0-20070510.dfsg.obsolete.0.331772574762912/dist_conf/debian
---- kolabd-2.1.0-20070510.dfsg.obsolete.0.331772574762912~/dist_conf/debian	2006-03-09 22:52:02.000000000 +0100
-+++ kolabd-2.1.0-20070510.dfsg.obsolete.0.331772574762912/dist_conf/debian	2007-06-23 14:58:22.000000000 +0200
+diff -urNad kolabd-2.1.0-20070510.dfsg~/dist_conf/debian kolabd-2.1.0-20070510.dfsg/dist_conf/debian
+--- kolabd-2.1.0-20070510.dfsg~/dist_conf/debian	2006-03-09 22:52:02.000000000 +0100
++++ kolabd-2.1.0-20070510.dfsg/dist_conf/debian	2007-07-25 20:17:30.000000000 +0200
 @@ -1,14 +1,15 @@
 -kolab_usr=root
 -kolab_grp=root
@@ -59,7 +59,17 @@
  
  ftpserver_scoreboardfile=${localstatedir}/proftpd/score
  ftpserver_logfile=${localstatedir}/log/proftpd.log
-@@ -77,26 +79,27 @@
+@@ -69,34 +71,35 @@
+ 
+ imap_confdir=${sysconfdir}
+ imap_confperm=0640
+-imap_usr=cyrus
+-imap_grp=sasl
++imap_usr=root
++imap_grp=root
+ imap_masterlogfile=${localstatedir}/log/mail.log
+ imap_misclogfile=${localstatedir}/log/mail.log
+ imap_statedir=${localstatedir}/lib/cyrus
  imap_spool=${localstatedir}/spool/cyrus/mail
  imap_sievedir=${localstatedir}/spool/sieve
  imap_lmtp=${localstatedir}/run/cyrus/socket/lmtp

Added: kolabd/trunk/templates/imapd.conf.template.in
===================================================================
--- kolabd/trunk/templates/imapd.conf.template.in	                        (rev 0)
+++ kolabd/trunk/templates/imapd.conf.template.in	2007-07-25 19:32:22 UTC (rev 649)
@@ -0,0 +1,365 @@
+KOLAB_META_START
+TARGET=@imap_confdir@/imapd.conf
+PERMISSIONS=0640
+OWNERSHIP=@imap_usr@:@imap_grp@
+KOLAB_META_END
+# Debian Cyrus imapd.conf
+# $Id: imapd.conf 565 2006-08-14 16:51:28Z sven $
+# See imapd.conf(5) for more information and more options
+
+# Configuration directory
+configdirectory: /var/lib/cyrus
+
+# Which partition to use for default mailboxes
+defaultpartition: default
+partition-default: /var/spool/cyrus/mail
+
+# News setup
+partition-news: /var/spool/cyrus/news
+newsspool: /var/spool/news
+
+# Alternate namespace
+# If enabled, activate the alternate namespace as documented in
+# /usr/share/doc/cyrus-doc-2.2/html/altnamespace.html, where an user's
+# subfolders are in the same level as the INBOX
+# See also userprefix and sharedprefix on imapd.conf(5)
+altnamespace: no
+
+# UNIX Hierarchy Convention
+# Set to yes, and cyrus will accept dots in names, and use the forward
+# slash "/" to delimit levels of the hierarchy. This is done by converting
+# internally all dots to "^", and all "/" to dots. So the "rabbit.holes"
+# mailbox of user "helmer.fudd" is stored in "user.elmer^fud.rabbit^holes"
+unixhierarchysep: yes
+
+# Rejecting illegal characters in headers
+# Headers of RFC2882 messages must not have characters with the 8th bit
+# set. However, too many badly-written MUAs generate this, including most
+# spamware. Enable this to reject such messages.
+#reject8bit: yes
+
+# Munging illegal characters in headers
+# Headers of RFC2882 messages must not have characters with the 8th bit
+# set. However, too many badly-written MUAs generate this, including most
+# spamware. If you kept reject8bit disabled, you can choose to leave the
+# crappage untouched by disabling this (if you don't care that IMAP SEARCH
+# won't work right anymore.
+#munge8bit: no
+
+# Forcing recipient user to lowercase
+# Cyrus 2.2 is case-sensitive.  If all your mail users are in lowercase, it is
+# probably a very good idea to set lmtp_downcase_rcpt to true.  This is set by 
+# default, per RFC2821. This was not set by default in debian versions up to
+# and including 2.2.12-4.
+lmtp_downcase_rcpt: yes
+
+# Uncomment the following and add the space-separated users who 
+# have admin rights for all services.
+admins: @@@cyrus-admins@@@
+
+# Space-separated list of users that have lmtp "admin" status (i.e. that
+# can deliver email through TCP/IP lmtp). If specified, this parameter
+# overrides the "admins" parameter above
+#lmtp_admins: postman
+
+# Space-separated list of users that have mupdate "admin" status, in
+# addition to those in the admins: entry above. Note that mupdate slaves and 
+# backends in a Murder cluster need to autenticate against the mupdate master
+# as admin users.
+#mupdate_admins: mupdateman
+
+# Space-separated list of users that have imapd "admin" status, in
+# addition to those in the admins: entry above
+#imap_admins: cyrus
+
+# Space-separated list of users that have sieve "admin" status, in
+# addition to those in the admins: entry above
+#sieve_admins: cyrus
+
+# List of users and groups that are allowed to proxy for other users,
+# seperated by spaces.  Any user listed in this will be allowed to login
+# for any other user.  Like "admins:" above, you can have imap_proxyservers
+# and sieve_proxyservers.
+#proxyservers: cyrus
+
+# No anonymous logins
+allowanonymouslogin: no
+
+# Minimum time between POP mail fetches in minutes
+# kolab note: this is disabled to get no errors at the client
+# in a groupware environment a client will connect more than
+# once in a minute
+#popminpoll: 1
+
+# If nonzero, normal users may create their own IMAP accounts by creating
+# the mailbox INBOX.  The user's quota is set to the value if it is positive,
+# otherwise the user has unlimited quota.
+autocreatequota: @@@cyrus-autocreatequota@@@
+
+# umask used by Cyrus programs
+umask: 077
+
+# Sendmail binary location
+# DUE TO A BUG, Cyrus sends CRLF EOLs to this program. This breaks Exim 3. 
+# For now, to work around the bug, set this to a wrapper that calls 
+# /usr/sbin/sendmail -dropcr instead if you use Exim 3.
+#sendmail: /usr/sbin/sendmail
+
+# If enabled, cyrdeliver will look for Sieve scripts in user's home
+# directories: ~user/.sieve.
+sieveusehomedir: false
+
+# If sieveusehomedir is false, this directory is searched for Sieve scripts.
+sievedir: /var/spool/sieve
+
+# notifyd(8) method to use for "MAIL" notifications.  If not set, "MAIL"
+# notifications are disabled.  Valid methods are: null, log, zephyr
+mailnotifier: mailto
+
+# notifyd(8) method to use for "SIEVE" notifications.  If not set, "SIEVE"
+# notifications are disabled.  This method is only used when no method is
+# specified in the script.  Valid methods are null, log, zephyr, mailto
+sievenotifier: mailto
+
+# DRAC (pop-before-smtp, imap-before-smtp) support
+# Set dracinterval to the time in minutes to call DRAC while a user is
+# connected to the imap/pop services. Set to 0 to disable DRAC (default)
+# Set drachost to the host where the rpc drac service is running
+#dracinterval: 0
+#drachost: localhost
+
+# If enabled, the partitions will also be hashed, in addition to the hashing
+# done on configuration directories. This is recommended if one partition has a
+# very bushy mailbox tree.
+hashimapspool: true
+
+# Allow plaintext logins by default (SASL PLAIN)
+allowplaintext: yes
+
+# Force PLAIN/LOGIN authentication only
+# (you need to uncomment this if you are not using an auxprop-based SASL
+# mechanism.  saslauthd users, that means you!). And pay attention to
+# sasl_minimum_layer and allowapop below, too.
+sasl_mech_list: PLAIN
+
+# Allow use of the POP3 APOP authentication command.
+# Note that this command requires that the plaintext passwords are 
+# available in a SASL auxprop backend (eg. sasldb), and that the system
+# can provide enough entropy (eg. from /dev/urandom) to create a challenge
+# in the banner.
+#allowapop: no
+
+# The minimum SSF that the server will allow a client to negotiate. A
+# value of 1 requires integrity protection; any higher value requires some
+# amount of encryption.
+#sasl_minimum_layer: 0
+
+# The maximum SSF that the server will allow a client to negotiate. A
+# value of 1 requires integrity protection; any higher value requires some
+# amount of encryption.
+#sasl_maximum_layer: 256
+
+# List of remote realms whose users may log in using cross-realm
+# authentications. Seperate each realm name by a space. A cross-realm
+# identity is considered any identity returned by SASL with an "@" in it.
+# NOTE: To support multiple virtual domains on the same interface/IP,
+# you need to list them all as loginreals. If you don't list them here,
+# (most of) your users probably won't be able to log in.
+loginrealms: @@@postfix-mydomain@@@ @@@postfix-mydestination|join( )@@@
+
+# Enable virtual domain support.  If enabled, the user's domain will
+# be determined by splitting a fully qualified userid at the last '@'
+# or '%' symbol.  If the userid is unqualified, and the virtdomains
+# option is set to "on", then the domain will be determined by doing
+# a reverse lookup on the IP address of the incoming network
+# interface, otherwise the user is assumed to be in the default
+# domain (if set).
+# Kolab uses ldap for virtual domains
+virtdomains: ldap
+
+# The default domain for virtual domain support
+# If the domain of a user can't be taken from its login and it can't
+# be determined by doing a reverse lookup on the interface IP, this
+# domain is used.
+#defaultdomain: 
+
+#
+# SASL library options (these are handled directly by the SASL libraries,
+# refer to SASL documentation for an up-to-date list of these)
+#
+
+# The mechanism(s) used by the server to verify plaintext passwords. Possible
+# values are "saslauthd", "auxprop", "pwcheck" and "alwaystrue".  They
+# are tried in order, you can specify more than one, separated by spaces.
+#
+# Do note that, since sasl will be run as user cyrus, you may have a lot of
+# trouble to set this up right.
+sasl_pwcheck_method: saslauthd
+
+# What auxpropd plugins to load, if using sasl_pwcheck_method: auxprop
+# by default, all plugins are tried (which is probably NOT what you want).
+#sasl_auxprop_plugin: sasldb
+
+# If enabled, the SASL library will automatically create authentication secrets
+# when given a plaintext password. Refer to SASL documentation 
+sasl_auto_transition: no
+
+#
+# SSL/TLS Options
+#
+
+# File containing the global certificate used for ALL services (imap, pop3,
+# lmtp, sieve)
+tls_cert_file: @sysconfdir@/kolab/cert.pem
+
+# File containing the private key belonging to the global server certificate.
+tls_key_file: @sysconfdir@/kolab/key.pem
+
+# File containing the certificate used for imap. If not specified, the global
+# certificate is used.  A value of "disabled" will disable SSL/TLS for imap.
+#imap_tls_cert_file: /etc/ssl/certs/cyrus-imap.pem
+
+# File containing the private key belonging to the imap-specific server
+# certificate.  If not specified, the global private key is used.  A value of
+# "disabled" will disable SSL/TLS for imap.
+#imap_tls_key_file: /etc/ssl/private/cyrus-imap.key
+
+# File containing the certificate used for pop3. If not specified, the global
+# certificate is used.  A value of "disabled" will disable SSL/TLS for pop3.
+#pop3_tls_cert_file: /etc/ssl/certs/cyrus-pop3.pem
+
+# File containing the private key belonging to the pop3-specific server
+# certificate.  If not specified, the global private key is used.  A value of
+# "disabled" will disable SSL/TLS for pop3.
+#pop3_tls_key_file: /etc/ssl/private/cyrus-pop3.key
+
+# File containing the certificate used for lmtp. If not specified, the global
+# certificate is used.  A value of "disabled" will disable SSL/TLS for lmtp.
+#lmtp_tls_cert_file: /etc/ssl/certs/cyrus-lmtp.pem
+
+# File containing the private key belonging to the lmtp-specific server
+# certificate.  If not specified, the global private key is used.  A value of
+# "disabled" will disable SSL/TLS for lmtp.
+#lmtp_tls_key_file: /etc/ssl/private/cyrus-lmtp.key
+
+# File containing the certificate used for sieve. If not specified, the global
+# certificate is used.  A value of "disabled" will disable SSL/TLS for sieve.
+#sieve_tls_cert_file: /etc/ssl/certs/cyrus-sieve.pem
+
+# File containing the private key belonging to the sieve-specific server
+# certificate.  If not specified, the global private key is used.  A value of
+# "disabled" will disable SSL/TLS for sieve.
+#sieve_tls_key_file: /etc/ssl/private/cyrus-sieve.key
+
+# File containing one or more Certificate Authority (CA) certificates.
+#tls_ca_file: @sysconfdir@/kolab/server.pem
+
+# Path to directory with certificates of CAs.
+tls_ca_path: /etc/ssl/certs
+
+# The length of time (in minutes) that a TLS session will be cached for later
+# reuse.  The maximum value is 1440 (24 hours), the default.  A value of 0 will
+# disable session caching.
+tls_session_timeout: 1440
+
+# The list of SSL/TLS ciphers to allow, in decreasing order of precedence.
+# The format of the string is described in ciphers(1).  The Debian default
+# selects TLSv1 high-security ciphers only, and removes all anonymous ciphers
+# from the list (because they provide no defense against man-in-the-middle
+# attacks).  It also orders the list so that stronger ciphers come first.
+tls_cipher_list: TLSv1+HIGH:!aNULL:@STRENGTH
+
+# Require a client certificate for ALL services (imap, pop3, lmtp, sieve).
+#tls_require_cert: false
+
+# Require a client certificate for imap ONLY.
+#imap_tls_require_cert: false
+
+# Require a client certificate for pop3 ONLY.
+#pop3_tls_require_cert: false
+
+# Require a client certificate for lmtp ONLY.
+#lmtp_tls_require_cert: false
+
+# Require a client certificate for sieve ONLY.
+#sieve_tls_require_cert: false
+
+#
+# Cyrus Murder cluster configuration
+#
+# Set the following options to the values needed for this server to
+# autenticate against the mupdate master server:
+# mupdate_server
+# mupdate_port
+# mupdate_username
+# mupdate_authname
+# mupdate_realm
+# mupdate_password
+# mupdate_retry_delay
+
+##
+## KEEP THESE IN SYNC WITH cyrus.conf
+##
+# Unix domain socket that lmtpd listens on.
+lmtpsocket: /var/run/cyrus/socket/lmtp
+
+# The idle backend to use for IDLE command.
+# Options: poll (default), idled, no
+# poll doesn't need the idled daemon and is supposed to be more robust.
+# however it doesn't update as quickly as the idled backend does. "no"
+# turns off IDLE support. If set to "idled", you will also need to enable
+# the "idled" entry in cyrus.conf.
+idlemethod: poll
+
+# Unix domain socket that idled listens on.
+idlesocket: /var/run/cyrus/socket/idle
+
+# Unix domain socket that the new mail notification daemon listens on.
+notifysocket: /var/run/cyrus/socket/notify
+
+# Syslog prefix. Defaults to cyrus (so logging is done as cyrus/imap etc.)
+syslog_prefix: cyrus
+
+##
+## DEBUGGING
+##
+# Debugging hook. See /usr/share/doc/kolab-cyrus-common/README.Debian.debug
+# Keep the hook disabled when it is not in use
+#
+# gdb Back-traces
+#debug_command: /usr/bin/gdb -batch -cd=/tmp -x /usr/lib/cyrus/get-backtrace.gdb /usr/lib/cyrus/bin/%s %d >/tmp/gdb-backtrace.cyrus.%1$s.%2$d <&- 2>&1 &
+#
+# system-call traces
+#debug_command: /usr/bin/strace -tt -o /tmp/strace.cyrus.%s.%d -p %2$d <&- 2>&1 &
+#
+# library traces
+#debug_command: /usr/bin/ltrace -tt -n 2 -o /tmp/ltrace.cyrus.%s.%d -p %2$d <&- 2>&1 &
+
+##
+## Kolab-specific additions
+##
+
+servername: @@@fqdnhostname@@@
+quotawarn: @@@cyrus-quotawarn@@@
+lmtp_over_quota_perm_failure: 1
+
+# support for lookup of mailbox name from local LDAP server
+ldap_uri:		@@@user_ldap_uri@@@
+ldap_base:		@@@base_dn@@@
+ldap_bind_dn:		@@@php_dn@@@
+ldap_password:		@@@php_pw@@@
+ldap_time_limit:	15
+
+# add support for posting to shared folders
+postuser: kolab
+userprefix: user
+sharedprefix: shared
+
+# Don't discard emails with identical message-id header (enabled by default):
+duplicatesuppression: 0
+
+# The interval (in seconds) for polling the mailbox for changes while running the IDLE command.
+# This option is used when  idled  can not be contacted or when polling is used exclusively.
+# The minimum value is 1.  A value of 0 will disable polling (and disable IDLE if polling is
+# the only method available).
+imapidlepoll: 5


