Bug#791869: lvm2: updating src:lvm2 from 2.02.111-2.2 to 2.02.122-1 breaks booting, mounting LVs other than / fails
Stefan Lippers-Hollmann
s.l-h at gmx.de
Fri Jul 31 01:27:16 UTC 2015
Hi
On 2015-07-25, Bastian Blank wrote:
> On Tue, Jul 21, 2015 at 09:11:57PM +0200, Bastian Blank wrote:
> > So the next step could be debugging udev and see what it calls and when.
>
> Please provide the complete udev db (udevadm info -e) and udev debugging
attached (in the broken state) as nforce4.log.gz (gzipped).
> output (udev.log-priority=8 at the kernel command line) from a failed
> boot.
I've finally found a system where I can grab this information via
serial console (using the serial console makes it less likely to
trigger, but it still happens):
### this is different hardware than the one used for the previous reports ###
Loading Linux 4.0.0-2-amd64 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-2-amd64 (debian-kernel at lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-2) ) #1 SMP Debian 4.0.8-2 (2015-07-22)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-amd64 root=/dev/mapper/vg--challenger-debian64 ro console=tty0 console=ttyS0,115200n8 udev.log-priority=8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7feffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7ff0000-0x00000000d7ff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d7ff3000-0x00000000d7ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000127ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x128000 max_arch_pfn = 0x400000000
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xd7ff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f52f0-0x000f52ff] mapped at [ffff8800000f52f0]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x127e00000-0x127ffffff]
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x127dfffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd7feffff]
[ 0.000000] RAMDISK: [mem 0x35d60000-0x36ea7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F91D0 000014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 0x00000000D7FF3040 000034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x00000000D7FF30C0 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0x00000000D7FF3180 0062AC (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000D7FF0000 000040
[ 0.000000] ACPI: SSDT 0x00000000D7FF9540 0001CA (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000D7FF9780 00003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x00000000D7FF9480 000072 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000127ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x127ff8000-0x127ffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000127ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d7feffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000127ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000127ffffff]
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7ff0000-0xd7ff2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7ff3000-0xd7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xf0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880127c00000 s87256 r8192 d31528 u1048576
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032057
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-amd64 root=/dev/mapper/vg--challenger-debian64 ro console=tty0 console=ttyS0,115200n8 udev.log-priority=8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xcc000000-0xcdffffff] (32MB)
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xcc000000-0xcfffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xcfffffff]
[ 0.000000] Memory: 3967052K/4193848K available (5560K kernel code, 1025K rwdata, 1940K rodata, 1252K init, 832K bss, 226796K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2210.129 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.020000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.25 BogoMIPS (lpj=8840516)
[ 0.022819] pid_max: default: 32768 minimum: 301
[ 0.024011] ACPI: Core revision 20150204
[ 0.034613] ACPI: All ACPI Tables successfully acquired
[ 0.040052] Security Framework initialized
[ 0.044016] AppArmor: AppArmor disabled by boot time parameter
[ 0.048002] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.052412] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.061034] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.065570] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.068010] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.076010] Initializing cgroup subsys blkio
[ 0.080006] Initializing cgroup subsys memory
[ 0.084011] Initializing cgroup subsys devices
[ 0.088005] Initializing cgroup subsys freezer
[ 0.092005] Initializing cgroup subsys net_cls
[ 0.096006] Initializing cgroup subsys perf_event
[ 0.100005] Initializing cgroup subsys net_prio
[ 0.104030] CPU: Physical Processor ID: 0
[ 0.108002] CPU: Processor Core ID: 0
[ 0.112003] mce: CPU supports 5 MCE banks
[ 0.116013] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.120002] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.124109] Freeing SMP alternatives memory: 24K (ffffffff81a3b000 - ffffffff81a41000)
[ 0.128932] ftrace: allocating 22402 entries in 88 pages
[ 0.140510] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.188000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (fam: 0f, model: 2b, stepping: 01)
[ 0.193544] Performance Events: AMD PMU driver.
[ 0.197517] ... version: 0
[ 0.200001] ... bit width: 48
[ 0.204001] ... generic registers: 4
[ 0.208001] ... value mask: 0000ffffffffffff
[ 0.212001] ... max period: 00007fffffffffff
[ 0.216001] ... fixed-purpose events: 0
[ 0.220001] ... event mask: 000000000000000f
[ 0.224674] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.228175] x86: Booting SMP configuration:
[ 0.232003] .... node #0, CPUs: #1
[ 0.328045] x86: Booted up 1 node, 2 CPUs
[ 0.332002] smpboot: Total of 2 processors activated (8840.92 BogoMIPS)
[ 0.336521] devtmpfs: initialized
[ 0.347852] PM: Registering ACPI NVS region [mem 0xd7ff0000-0xd7ff2fff] (12288 bytes)
[ 0.352149] pinctrl core: initialized pinctrl subsystem
[ 0.360216] NET: Registered protocol family 16
[ 0.376010] cpuidle: using governor ladder
[ 0.392005] cpuidle: using governor menu
[ 0.395956] TOM: 00000000d8000000 aka 3456M
[ 0.400015] TOM2: 0000000128000000 aka 4736M
[ 0.404064] ACPI: bus type PCI registered
[ 0.408002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.412097] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.424003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.428653] PCI: Using configuration type 1 for base access
[ 0.448086] ACPI: Added _OSI(Module Device)
[ 0.452009] ACPI: Added _OSI(Processor Device)
[ 0.456002] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.460002] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.472379] ACPI: Interpreter enabled
[ 0.476016] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.484014] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.488002] ACPI: Using IOAPIC for interrupt routing
[ 0.492038] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.511874] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[ 0.516011] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.524007] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.532847] PCI host bridge to bus 0000:00
[ 0.536004] pci_bus 0000:00: root bus resource [bus 00-05]
[ 0.540003] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.548002] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.556002] pci_bus 0000:00: root bus resource [io 0x9000-0xffff window]
[ 0.560002] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.568002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.576002] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xfe02ffff window]
[ 0.584002] pci_bus 0000:00: root bus resource [mem 0xfeb00000-0xfebfffff window]
[ 0.592243] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.600452] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.604202] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.612251] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.620003] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.624002] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.632002] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.640586] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.644183] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.652183] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.656182] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.664182] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.668179] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.677041] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.684071] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.688049] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.692047] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.696287] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.708008] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.712173] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.722577] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.730066] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.737564] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.744974] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.753684] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.761269] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.769962] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.777565] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.785278] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.792689] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.800394] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.806994] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.816278] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.824274] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.831001] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.840288] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.845987] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.853567] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.860075] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.865959] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.872292] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.880297] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.886876] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.894881] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.902576] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.909987] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.917571] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.924289] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.932295] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 0.938882] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.946882] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.955294] vgaarb: setting as boot device: PCI:0000:05:00.0
[ 0.956000] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.968003] vgaarb: loaded
[ 0.972002] vgaarb: bridge control possible 0000:05:00.0
[ 0.976112] PCI: Using ACPI for IRQ routing
[ 0.986847] pci 0000:00:01.1: can't claim BAR 4 [io 0x4c00-0x4c3f]: no compatible bridge window
[ 0.988004] pci 0000:00:01.1: can't claim BAR 5 [io 0x4c40-0x4c7f]: no compatible bridge window
[ 0.992292] Switched to clocksource refined-jiffies
[ 1.006887] pnp: PnP ACPI init
[ 1.008235] system 00:00: [io 0x4000-0x407f] could not be reserved
[ 1.012005] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 1.016004] system 00:00: [io 0x4400-0x447f] has been reserved
[ 1.020004] system 00:00: [io 0x4480-0x44ff] could not be reserved
[ 1.024005] system 00:00: [io 0x4800-0x487f] has been reserved
[ 1.028005] system 00:00: [io 0x4880-0x48ff] has been reserved
[ 1.032610] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f]
[ 1.036006] pnp 00:01: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f]
[ 1.040007] pnp 00:01: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f]
[ 1.044006] pnp 00:01: disabling [io 0x0022-0x003f disabled] because it overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f]
[ 1.048060] system 00:01: [io 0x0b78-0x0b7b] has been reserved
[ 1.052007] system 00:01: [io 0x0f78-0x0f7b] has been reserved
[ 1.056007] system 00:01: [io 0x0a78-0x0a7b] has been reserved
[ 1.060007] system 00:01: [io 0x0e78-0x0e7b] has been reserved
[ 1.064007] system 00:01: [io 0x0bbc-0x0bbf] has been reserved
[ 1.068007] system 00:01: [io 0x0fbc-0x0fbf] has been reserved
[ 1.072008] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.076008] system 00:01: [io 0x0290-0x030f] has been reserved
[ 1.080852] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.084196] system 00:06: [mem 0x000d5000-0x000d7fff] has been reserved
[ 1.088009] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 1.092009] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 1.096009] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[ 1.100009] system 00:06: [mem 0xd7ff0000-0xd7ffffff] could not be reserved
[ 1.104017] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.108010] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.112010] system 00:06: [mem 0x00100000-0xd7feffff] could not be reserved
[ 1.116010] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.120010] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.124011] system 00:06: [mem 0xfefff000-0xfeffffff] has been reserved
[ 1.128011] system 00:06: [mem 0xfff80000-0xfff80fff] has been reserved
[ 1.132011] system 00:06: [mem 0xfff90000-0xfffbffff] has been reserved
[ 1.136011] system 00:06: [mem 0xfffed000-0xfffeffff] has been reserved
[ 1.140026] pnp: PnP ACPI: found 7 devices
[ 1.154733] Switched to clocksource acpi_pm
[ 1.156277] pci 0000:00:01.1: BAR 4: assigned [io 0x0400-0x043f]
[ 1.162406] pci 0000:00:01.1: BAR 5: assigned [io 0x0440-0x047f]
[ 1.168533] pci 0000:01:07.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 1.175785] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 1.180774] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 1.186894] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.193706] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 1.200955] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 1.205949] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
[ 1.212070] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.218882] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 1.226651] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 1.231650] pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
[ 1.237767] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 1.244578] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 1.252346] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 1.257334] pci 0000:00:0d.0: bridge window [io 0xa000-0xafff]
[ 1.263454] pci 0000:00:0d.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 1.270266] pci 0000:00:0d.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.278037] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd700000-0xfd71ffff pref]
[ 1.285289] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 1.290277] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff]
[ 1.296396] pci 0000:00:0e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 1.303208] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 1.311128] NET: Registered protocol family 2
[ 1.315807] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.323271] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.330230] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.336902] TCP: reno registered
[ 1.340173] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.346262] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.352891] NET: Registered protocol family 1
[ 1.357610] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 1.432337] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 1.438271] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.443787] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.449394] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.454910] pci 0000:00:0b.0: Linking AER extended capability
[ 1.460712] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.466230] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.471830] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.477338] pci 0000:00:0c.0: Linking AER extended capability
[ 1.483145] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.488661] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.494260] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.499777] pci 0000:00:0d.0: Linking AER extended capability
[ 1.505585] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.511098] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.516698] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.522206] pci 0000:00:0e.0: Linking AER extended capability
[ 1.528088] Unpacking initramfs...
[ 1.956396] Freeing initrd memory: 17696K (ffff880035d60000 - ffff880036ea8000)
[ 1.964043] PCI-DMA: Disabling AGP.
[ 1.967669] PCI-DMA: aperture base @ cc000000 size 65536 KB
[ 1.973273] PCI-DMA: using GART IOMMU.
[ 1.977052] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.987525] microcode: AMD CPU family 0xf not supported
[ 1.993253] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.999427] audit: initializing netlink subsys (disabled)
[ 2.004887] audit: type=2000 audit(1438304487.003:1): initialized
[ 2.012713] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.019132] zpool: loaded
[ 2.022005] VFS: Disk quotas dquot_6.5.2
[ 2.025986] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.033683] alg: No test for stdrng (krng)
[ 2.037863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.045363] io scheduler noop registered
[ 2.049327] io scheduler deadline registered
[ 2.053664] io scheduler cfq registered (default)
[ 2.058766] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.064392] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.071112] GHES: HEST is not enabled!
[ 2.075000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.101587] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.109401] Linux agpgart interface v0.103
[ 2.113580] AMD IOMMUv2 driver by Joerg Roedel <jroedel at suse.de>
[ 2.119614] AMD IOMMUv2 functionality not available on this system
[ 2.125900] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.135245] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.140253] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.145558] mousedev: PS/2 mouse device common for all mice
[ 2.151231] rtc_cmos 00:02: RTC can wake from S4
[ 2.156038] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.162195] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram
[ 2.168857] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.175371] TCP: cubic registered
[ 2.178761] NET: Registered protocol family 10
[ 2.183574] mip6: Mobile IPv6
[ 2.186587] NET: Registered protocol family 17
[ 2.191064] mpls_gso: MPLS GSO support
[ 2.195333] registered taskstats version 1
[ 2.200054] rtc_cmos 00:02: setting system clock to 2015-07-31 01:01:28 UTC (1438304488)
[ 2.209268] Freeing unused kernel memory: 1252K (ffffffff81902000 - ffffffff81a3b000)
[ 2.217161] Write protecting the kernel read-only data: 8192k
[ 2.223547] Freeing unused kernel memory: 572K (ffff880001571000 - ffff880001600000)
[ 2.231468] Freeing unused kernel memory: 108K (ffff8800017e5000 - ffff880001800000)
Loading, please wait...
invalid udev.log[ 2.343952] random: systemd-udevd urandom read with 4 bits of entropy available
-priority ignored: 8
starting version 223
[ 2.395493] Floppy drive(s): fd0 is 1.44M
[ 2.405976] ACPI: bus type USB registered
[ 2.408426] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.408428] ACPI: Thermal Zone [THRM] (22 C)
[ 2.421883] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.430762] FDC 0 is a post-1991 82077
[ 2.437114] SCSI subsystem initialized
[ 2.441271] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.448370] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.457827] usbcore: registered new interface driver usbfs
[ 2.463082] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 2.469429] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 2.475335] usbcore: registered new interface driver hub
[ 2.480723] usbcore: registered new device driver usb
[ 2.486751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.494007] ehci-pci: EHCI PCI platform driver
[ 2.499091] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.536054] firewire_ohci 0000:01:0c.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 2.546092] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 2.976540] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:17:b6:05:93
[ 2.984924] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 2.992444] scsi host0: pata_amd
[ 2.995937] scsi host1: pata_amd
[ 2.999268] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 3.001425] e1000 0000:01:07.0 eth1: (PCI:33MHz:32-bit) 00:0e:0c:34:1c:fc
[ 3.001428] e1000 0000:01:07.0 eth1: Intel(R) PRO/1000 Network Connection
[ 3.019883] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 3.027192] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 3.033395] scsi host2: sata_nv
[ 3.036681] scsi host3: sata_nv
[ 3.039895] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf600 irq 20
[ 3.046882] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf608 irq 20
[ 3.048132] firewire_core 0000:01:0c.0: created device fw0: GUID 0010dc000105bafc, S400
[ 3.062072] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 3.067335] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 3.074764] ehci-pci 0000:00:02.1: debug port 1
[ 3.079362] ehci-pci 0000:00:02.1: irq 22, io mem 0xfeb00000
[ 3.096032] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.101868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.108684] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.115930] usb usb1: Product: EHCI Host Controller
[ 3.120833] usb usb1: Manufacturer: Linux 4.0.0-2-amd64 ehci_hcd
[ 3.126865] usb usb1: SerialNumber: 0000:00:02.1
[ 3.131700] hub 1-0:1.0: USB hub found
[ 3.135491] hub 1-0:1.0: 10 ports detected
[ 3.140356] ohci-pci: OHCI PCI platform driver
[ 3.145348] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 3.151622] scsi host4: sata_nv
[ 3.154922] scsi host5: sata_nv
[ 3.158158] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf100 irq 23
[ 3.165148] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf108 irq 23
[ 3.172281] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 3.177885] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.185349] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 3.208303] ata1.00: ATAPI: TOSHIBA ODD-DVD SD-M1802, J031, max UDMA/33
[ 3.244225] ata1.00: configured for UDMA/33
[ 3.246074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.246076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.246077] usb usb2: Product: OHCI PCI host controller
[ 3.246079] usb usb2: Manufacturer: Linux 4.0.0-2-amd64 ohci_hcd
[ 3.246080] usb usb2: SerialNumber: 0000:00:02.0
[ 3.246250] hub 2-0:1.0: USB hub found
[ 3.246259] hub 2-0:1.0: 10 ports detected
[ 3.287336] scsi 0:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-M1802 J031 PQ: 0 ANSI: 5
[ 3.464290] ata2.00: ATAPI: _NEC DVD_RW ND-1300A, 1.0B, max UDMA/33
[ 3.484031] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.484320] ata2.00: configured for UDMA/33
[ 3.487617] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-1300A 1.0B PQ: 0 ANSI: 5
[ 3.532033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.560222] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 3.566258] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.580212] ata3.00: configured for UDMA/133
[ 3.584694] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1113 PQ: 0 ANSI: 5
[ 3.904021] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.220023] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.229278] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.237114] sd 2:0:0:0: [sda] Write Protect is off
[ 4.239487] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.239491] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.251422] sr 1:0:0:0: [sr1] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 4.262530] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.279911] sda: sda1 sda2
[ 4.283028] sd 2:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premoun[ 4.464679] device-mapper: uevent: version 1.0.3
t ... done.
Beg[ 4.470727] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel at redhat.com
in: Mounting root file system ... Begin: Running /scripts/local-top ... lvmetad is not active yet, using direct activation during sysinit
done.
Begin: Running /scripts/local-premount ... done.
Begin: Checking root file system ... fsck from util-linux 2.26.2
debian64: clean, 178882/655360 files, 1273858/2621440 blocks
done.
[ 4.730466] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 5.395461] systemd[1]: Inserted module 'autofs4'
[ 5.412965] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 5.485944] systemd[1]: systemd 223 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 5.504210] systemd[1]: Detected architecture x86-64.
Welcome to Debian GNU/Linux stretch/sid!
[ 5.545149] systemd[1]: Set hostname to <challenger>.
[ 5.642124] random: nonblocking pool is initialized
[ 6.615490] systemd[1]: Reached target Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 6.632180] systemd[1]: Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 6.648086] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 6.660158] systemd[1]: Created slice Root Slice.
[ OK ] Created slice Root Slice.
[ 6.672171] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 6.688127] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 6.708125] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 6.720276] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 6.736966] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 6.752921] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 6.768401] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 6.784333] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 6.800168] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 6.820250] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 6.840208] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 6.856892] systemd[1]: Starting LSB: Set keymap...
Starting LSB: Set keymap...
[ 6.873103] systemd[1]: Starting Increase datagram queue length...
Starting Increase datagram queue length...
[ 6.888267] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 6.908291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 6.928210] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 6.944414] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
[ 7.006790] systemd[1]: Listening on LVM2 metadata daemon socket.
[ OK ] Listening on LVM2 metadata daemon socket.
[ 7.025279] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...
[ 7.048248] systemd[1]: Listening on LVM2 poll daemon socket.
[ OK ] Listening on LVM2 poll daemon socket.
[ 7.064365] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 7.080195] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 7.096089] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 7.144971] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 7.160271] systemd[1]: Listening on networkd rtnetlink socket.
[ OK ] Listening on networkd rtnetlink socket.
[ 7.176978] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 7.304826] lp: driver loaded but no devices found
[ 7.313290] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.313897] ppdev: user-space parallel port driver
Starting Create list of required st... nodes for the current kernel...
[ 7.340308] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 7.357035] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 7.372173] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 7.388127] systemd[1]: Mounted Debug File System.
[ OK ] Mounted Debug File System.
[ 7.400690] systemd[1]: Started LSB: Set keymap.
[ OK ] Started LSB: Set keymap.
[ 7.416679] systemd[1]: Started Increase datagram queue length.
[ OK ] Started Increase datagram queue length.
[ 7.432472] systemd[1]: Started Load Kernel Modules.
[ OK ] Started Load Kernel Modules.
[ 7.448623] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 7.488131] systemd[1]: Started LVM2 metadata daemon.
[ OK ] Started LVM2 metadata daemon.
[ 7.505244] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 7.521231] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 7.536238] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 7.549042] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 7.626948] systemd[1]: Started Apply Kernel Variables.
[ OK ] Started Apply Kernel Variables.
[ 7.651621] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling.
[ OK ] Started udev Kernel Device Manager.
Starting LSB: Set preliminary keymap...
Starting Copy rules generated while the root was ro...
Starting LSB: Tune IDE hard disks...
[ OK ] Started Copy rules generated while the root was ro.
[ OK ] Started LSB: Tune IDE hard disks.
[ OK ] Started LSB: Set preliminary keymap.
Starting Remount Root and Kernel File Systems...
[ 9.128398] EXT4-fs (dm-0): re-mounted. Opts: barrier=0
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Reached target Local File Systems (Pre).
Starting udev Coldplug all Devices...
[ OK ] Started udev Coldplug all Devices.
[ 9.627291] i2c i2c-0: nForce2 SMBus adapter at 0x400
[ 9.632443] i2c i2c-1: nForce2 SMBus adapter at 0x440
[ 9.688424] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 9.696870] ACPI: Power Button [PWRB]
[ 9.701014] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 9.708547] ACPI: Power Button [PWRF]
[ 9.749209] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 9.754654] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.760195] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.992502] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.008780] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 10.025826] cfg80211: Calling CRDA to update world regulatory domain
[ OK ] Found device /dev/ttyS0.
[ 10.262142] powernow_k8: fid 0xe (2200 MHz), vid 0x8
[ 10.267171] powernow_k8: fid 0xc (2000 MHz), vid 0xa
[ 10.272168] powernow_k8: fid 0xa (1800 MHz), vid 0xc
[ 10.277173] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 10.283883] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 10.333535] [drm] Initialized drm 1.1.0 20060810
[ 10.340138] snd_intel8x0 0000:00:04.0: intel8x0_measure_ac97_clock: measured 53611 usecs (2632 samples)
[ 10.349580] snd_intel8x0 0000:00:04.0: clocking to 46930
[ 10.349587] ath5k: unknown parameter 'override_countrycode' ignored
[ 10.349939] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 10.350036] ath5k 0000:01:06.0: registered as 'phy0'
[ 10.378911] EDAC MC: Ver: 3.0.0
[ 10.418363] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ OK ] Reached target Sound Card.
[ 10.531939] [drm] radeon kernel modesetting enabled.
[ 10.537484] MCE: In-kernel MCE decoding enabled.
[ 10.542775] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 10.549554] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60 0x1043:0x0082).
[ 10.557690] [drm] register mmio base: 0xFD7F0000
[ 10.562363] [drm] register mmio size: 65536
[ 10.568340] [drm] Generation 2 PCI interface, using max accessible memory
[ 10.575206] radeon 0000:05:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used)
[ 10.583954] radeon 0000:05:00.0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF
[ 10.591589] [drm] Detected VRAM RAM=128M, BAR=128M
[ 10.596426] [drm] RAM width 64bits DDR
[ 10.601022] [TTM] Zone kernel: Available graphics memory: 2026328 kiB
[ 10.607633] [TTM] Initializing pool allocator
[ 10.613478] [TTM] Initializing DMA pool allocator
[ 10.619245] [drm] radeon: 128M of VRAM memory ready
[ 10.624287] [drm] radeon: 512M of GTT memory ready.
[ 10.629248] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 10.637939] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 10.644856] [drm] PCIE GART of 512M enabled (table at 0x00000000D8040000).
[ 10.651899] radeon 0000:05:00.0: WB enabled
[ 10.656140] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x00000000b8000000 and cpu addr 0xffff8800d0aa4000
[ 10.666997] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.673649] [drm] Driver supports precise vblank timestamp query.
[ 10.679869] radeon 0000:05:00.0: radeon: MSI limited to 32-bit
[ 10.686110] radeon 0000:05:00.0: radeon: using MSI.
[ 10.691103] [drm] radeon: irq initialized.
[ 10.695394] [drm] Loading R300 Microcode
[ 10.700608] AMD64 EDAC driver v3.4.0
[ 10.704289] EDAC amd64: DRAM ECC disabled.
[ 10.708439] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 10.708439] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 10.708439] (Note that use of the override may cause unknown side effects.)
[ 10.772272] radeon 0000:05:00.0: firmware: direct-loading firmware radeon/R300_cp.bin
[ 10.780604] [drm] radeon: ring at 0x00000000B8001000
[ 10.786017] [drm] ring test succeeded in 0 usecs
[ 10.790957] [drm] ib test succeeded in 0 usecs
[ 10.795911] [drm] Radeon Display Connectors
[ 10.800159] [drm] Connector 0:
[ 10.803247] [drm] VGA-1
[ 10.805910] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 10.811960] [drm] Encoders:
[ 10.814978] [drm] CRT1: INTERNAL_DAC1
[ 10.819033] [drm] Connector 1:
[ 10.822134] [drm] DVI-I-1
[ 10.824979] [drm] HPD1
[ 10.827552] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 10.833595] [drm] Encoders:
[ 10.836607] [drm] CRT2: INTERNAL_DAC2
[ 10.840667] [drm] DFP1: INTERNAL_TMDS1
[ 10.844806] [drm] Connector 2:
[ 10.847896] [drm] SVIDEO-1
[ 10.850822] [drm] Encoders:
[ 10.853835] [drm] TV1: INTERNAL_DAC2
[ 10.886112] [drm] fb mappable at 0xD80C0000
[ 10.890354] [drm] vram apper at 0xD8000000
[ 10.894571] [drm] size 3145728
[ 10.897735] [drm] fb depth is 24
[ 10.901008] [drm] pitch is 4096
[ 10.904609] fbcon: radeondrmfb (fb0) is primary device
[ 10.954993] cfg80211: World regulatory domain updated:
[ 10.954997] cfg80211: DFS Master region: unset
[ 10.954997] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.955000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.955002] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.955003] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.955005] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 10.955007] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 10.955009] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.955010] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.955011] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.960165] Console: switching to colour frame buffer device 128x48
[ 11.062379] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
[ 11.064100] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 11.069441] cfg80211: Calling CRDA for country: CN
[ 11.080548] radeon 0000:05:00.0: registered panic notifier
[ 11.097610] [drm] Initialized radeon 2.41.0 20080528 for 0000:05:00.0 on minor 0
[ 11.116397] cfg80211: Regulatory domain changed to country: CN
[ 11.122303] cfg80211: DFS Master region: FCC
[ 11.126540] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.136372] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.144440] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 11.153990] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 11.164765] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 11.174049] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 11.183702] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 11.193346] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 11.206307] cfg80211: Calling CRDA for country: DE
[ 11.280282] cfg80211: Regulatory domain changed to country: DE
[ 11.287446] cfg80211: DFS Master region: ETSI
[ 11.291758] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.304214] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.313620] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.324522] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.335457] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 11.344948] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ OK ] Created slice system-systemd\x2drfkill.slice.
[ TIME ] Timed out waiting for device dev-vg\x2dchallenger-storage.device.
[DEPEND] Dependency failed for /srv/storage.
[DEPEND] Dependency failed for Local File Systems.
[DEPEND] Dependency failed for File System Check on /dev/vg-challenger/storage.
[ TIME ] Timed out waiting for device dev-vg\x2dchallenger-home.device.
[DEPEND] Dependency failed for /home.
[DEPEND] Dependency failed for File System Check on /dev/vg-challenger/home.
[ TIME ] Timed out waiting for device dev-vg\x2dchallenger-var.device.
[DEPEND] Dependency failed for File System Check on /dev/vg-challenger/var.
[DEPEND] Dependency failed for /var.
[DEPEND] Dependency failed for Update UTMP about System Runlevel Changes.
[DEPEND] Dependency failed for Update UTMP about System Boot/Shutdown.
[DEPEND] Dependency failed for Load/Save RF Kill Switch Status of rfkill0.
[DEPEND] Dependency failed for Flush Journal to Persistent Storage.
[DEPEND] Dependency failed for Network Time Synchronization.
[DEPEND] Dependency failed for Virtual Machine and Container Storage.
[DEPEND] Dependency failed for Load/Save Random Seed.
[DEPEND] Dependency failed for /tmp.
[ OK ] Stopped getty on tty2-tty6 if dbus and logind are not available.
[ OK ] Stopped target Graphical Interface.
[ OK ] Stopped target Multi-User System.
[ OK ] Stopped Network Name Resolution.
[ OK ] Stopped D-Bus System Message Bus.
[ OK ] Stopped LSB: daemon to balance interrupts for SMP systems.
[ OK ] Stopped LSB: set CPUFreq kernel parameters.
[ OK ] Stopped Serial Getty on ttyS0.
[ OK ] Stopped Internet superserver.
[ OK ] Stopped Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Stopped CUPS Scheduler.
[ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon.
[ OK ] Stopped LSB: start DirMngr daemon.
[ OK ] Stopped Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Stopped WPA supplicant.
[ OK ] Stopped Login Service.
[ OK ] Stopped Run anacron jobs.
[ OK ] Reached target System Time Synchronized.
[ OK ] Closed Network Name Resolution Service Bus Name.
[ OK ] Closed ACPID Listen Socket.
[ OK ] Stopped System Logging Service.
[ OK ] Closed Syslog Socket.
[ OK ] Closed Network Service Bus Name.
Starting Network Service...
[ OK ] Stopped OpenBSD Secure Shell server.
[ OK ] Stopped Self Monitoring and Reporting Technology (SMART) Daemon.
[ OK ] Closed CUPS Scheduler.
[ OK ] Stopped Simple Desktop Display Manager.
[ OK ] Stopped Permit User Sessions.
[ OK ] Stopped Regular background program processing daemon.
[ 97.254795] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ OK ] Stopped LSB: start and stop UML networking services.
[ OK ] Stopped ACPI Events Check.
[ 97.285241] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 97.295750] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
[ OK ] Reached target Remote File Systems.
[ OK ] Stopped /etc/rc.local Compatibility.
[ OK ] Stopped target Basic System.
[ OK ] Reached target Paths.
[ OK ] Closed D-Bus System Message Bus Socket.
[ OK ] Stopped target System Initialization.
Starting Console System Startup Logging...
[ OK ] Started Emergency Shell.
Starting LSB: Prepare console...
[ OK ] Reached target Emergency Mode.
Starting Create Volatile Files and Directories...
[ OK ] Reached target Sockets.
[ OK ] Started Network Service.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
[FAILED] Failed to start Console System Startup Logging.
See 'systemctl status console-kit-log-system-start.service' for details.
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Started LSB: Prepare console.
Starting LSB: Set console font and keymap...
[ OK ] Started LSB: Set console font and keymap.
Welcome to emergGive root password for maintenance
(or press Control-D to continue):
challenger:~# cat /proc/version
Linux version 4.0.0-2-amd64 (debian-kernel at lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-2) ) #1 SMP Debian 4.0.8-2 (2015-07-22)
challenger:~# cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-amd64 root=/dev/mapper/vg--challenger-debian64 ro console=tty0 console=ttyS0,115200n8 udev.log-priority=8
challenger:~# cat /etc/fstab
# /etc/fstab: filesystem table.
#
# filesystem mountpoint type options dump pass
/dev/vg-challenger/debian64 / ext4 defaults,noatime,barrier=0 1 1
/dev/vg-challenger/var /var ext4 auto,exec,dev,noatime,barrier=0 1 2
/var/tmp /tmp none bind 0 0
/dev/vg-challenger/home /home ext4 auto,exec,nodev,nosuid,noatime,barrier=0 1 2
/dev/vg-challenger/storage /srv/storage ext4 auto,noexec,nodev,nosuid,noatime,barrier=0 1 2
challenger:~# md5sum -b /etc/lvm/lvm.conf
465b8eb81f04535531c5c3a0fec8b788 */etc/lvm/lvm.conf
challenger:~# pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 vg-challenger lvm2 a-- 831,49g 251,49g
challenger:~# vgs
VG #PV #LV #SN Attr VSize VFree
vg-challenger 1 4 0 wz--n- 831,49g 251,49g
challenger:~# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
debian64 vg-challenger -wi-ao---- 10,00g
home vg-challenger -wi------- 310,00g
storage vg-challenger -wi------- 250,00g
var vg-challenger -wi------- 10,00g
challenger:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
fd0 2:0 1 4K 0 disk
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 100G 0 part
└─sda2 8:2 0 831,5G 0 part
└─vg--challenger-debian64 254:0 0 10G 0 lvm /
sr0 11:0 1 1024M 0 rom
sr1 11:1 1 1024M 0 rom
challenger:~# systemctl status | cat -
● challenger
State: maintenance
Jobs: 0 queued
Failed: 1 units
Since: Fr 2015-07-31 03:01:31 CEST; 8min ago
CGroup: /
├─1 /sbin/init
└─system.slice
├─lvm2-lvmetad.service
│ └─199 /sbin/lvmetad -f
├─emergency.service
│ ├─479 /bin/sh -c /sbin/sulogin; /bin/systemctl --job-mode=fail --no-block default
│ ├─480 /sbin/sulogin
│ ├─483 bash
│ ├─484 /sbin/sulogin
│ ├─515 systemctl status
│ └─516 cat -
├─systemd-journald.service
│ └─203 /lib/systemd/systemd-journald
├─systemd-networkd.service
│ └─383 /lib/systemd/systemd-networkd
└─systemd-udevd.service
└─206 /lib/systemd/systemd-udevd
challenger:~# vgchange -ay
4 logical volume(s) in volume group "vg-challenger" now active
[ 525.672908] EXT4-fs (dm-3): barriers disabled)
[ 525.731022] EXT4-fs (dm-1): barriers disabled
[ 525.733624] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: barrier=0
[ 525.779844] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: barrier=0
[ 525.783631] EXT4-fs (dm-2): barriers disabled
[ 525.808851] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: barrier=0
challenger:~# mount -a
challenger:~# exit
exit
Error getting authority: Error initializing authority: Could not connect: No such file or directory (g-io-error-quark, 1)
[ 547.192828] systemd-journald[203]: Received request to flush runtime journal from PID 1
Debian GNU/Linux stretch/sid challenger ttyS0
challenger login: root
Passwort:
Letzte Anmeldung: Freitag, den 31. Juli 2015, 03:00:55 CEST auf ttyS0
Linux challenger 4.0.0-2-amd64 #1 SMP Debian 4.0.8-2 (2015-07-22) x86_64
Sie haben Nachrichten.
challenger:~# dpkg -l | grep -e lvm2 -e clvm -e libdevmapper-dev -e libdevmapper1.02.1 -e dmsetup -e libdevmapper-event1.02.1 -e dmeventd -e liblvm2app2.2 -e liblvm2cmd2.02 -e liblvm2-dev -e initramfs-tools -e linux-image-amd64 -e linux-image-4.0.0-2-amd64 -e mdadm
ii dmeventd 2:1.02.103-1 amd64 Linux Kernel Device Mapper event daemon
ii dmsetup 2:1.02.103-1 amd64 Linux Kernel Device Mapper userspace library
ii initramfs-tools 0.120 all generic modular initramfs generator
ii libdevmapper-event1.02.1:amd64 2:1.02.103-1 amd64 Linux Kernel Device Mapper event support library
ii libdevmapper1.02.1:amd64 2:1.02.103-1 amd64 Linux Kernel Device Mapper userspace library
ii liblvm2app2.2:amd64 2.02.126-1 amd64 LVM2 application library
ii liblvm2cmd2.02:amd64 2.02.126-1 amd64 LVM2 command library
ii linux-image-4.0.0-2-amd64 4.0.8-2 amd64 Linux 4.0 for 64-bit PCs
ii linux-image-amd64 4.0+65 amd64 Linux for 64-bit PCs (meta-package)
ii lvm2 2.02.126-1 amd64 Linux Logical Volume Manager
challenger:~# dpkg -S /etc/initramfs-tools/
initramfs-tools: /etc/initramfs-tools
challenger:~# dpkg -S /usr/share/initramfs-tools/
lvm2, fuse, busybox, uswsusp, initramfs-tools, ntfs-3g, udev, kmod, dmsetup: /usr/share/initramfs-tools
challenger:~# debsums -as lvm2 fuse busybox uswsusp initramfs-tools ntfs-3g udev kmod dmsetup
challenger:~# find /etc/udev/rules.d/ /lib/udev/rules.d/ -type f | sort
/etc/udev/rules.d/70-persistent-cd.rules
/etc/udev/rules.d/70-persistent-net.rules
/lib/udev/rules.d/39-usbmuxd.rules
/lib/udev/rules.d/50-firmware.rules
/lib/udev/rules.d/50-udev-default.rules
/lib/udev/rules.d/55-dm.rules
/lib/udev/rules.d/56-lvm.rules
/lib/udev/rules.d/60-block.rules
/lib/udev/rules.d/60-bridge-network-interface.rules
/lib/udev/rules.d/60-cdrom_id.rules
/lib/udev/rules.d/60-crda.rules
/lib/udev/rules.d/60-drm.rules
/lib/udev/rules.d/60-evdev.rules
/lib/udev/rules.d/60-ffado.rules
/lib/udev/rules.d/60-fuse.rules
/lib/udev/rules.d/60-gnupg.rules
/lib/udev/rules.d/60-ir-keytable.rules
/lib/udev/rules.d/60-libgphoto2-6.rules
/lib/udev/rules.d/60-libsane.rules
/lib/udev/rules.d/60-persistent-alsa.rules
/lib/udev/rules.d/60-persistent-input.rules
/lib/udev/rules.d/60-persistent-storage-dm.rules
/lib/udev/rules.d/60-persistent-storage.rules
/lib/udev/rules.d/60-persistent-storage-tape.rules
/lib/udev/rules.d/60-persistent-v4l.rules
/lib/udev/rules.d/60-qemu-system-common.rules
/lib/udev/rules.d/60-serial.rules
/lib/udev/rules.d/60-udev-config-aptosid.rules
/lib/udev/rules.d/64-btrfs.rules
/lib/udev/rules.d/64-xorg-xkb.rules
/lib/udev/rules.d/69-libmtp.rules
/lib/udev/rules.d/69-lvm-metad.rules
/lib/udev/rules.d/69-xorg-vmmouse.rules
/lib/udev/rules.d/70-mouse.rules
/lib/udev/rules.d/70-power-switch.rules
/lib/udev/rules.d/70-spice-vdagentd.rules
/lib/udev/rules.d/70-uaccess.rules
/lib/udev/rules.d/70-udev-acl.rules
/lib/udev/rules.d/71-seat.rules
/lib/udev/rules.d/73-idrac.rules
/lib/udev/rules.d/73-seat-late.rules
/lib/udev/rules.d/75-net-description.rules
/lib/udev/rules.d/75-probe_mtd.rules
/lib/udev/rules.d/78-sound-card.rules
/lib/udev/rules.d/80-debian-compat.rules
/lib/udev/rules.d/80-drivers.rules
/lib/udev/rules.d/80-net-setup-link.rules
/lib/udev/rules.d/80-networking.rules
/lib/udev/rules.d/80-udisks2.rules
/lib/udev/rules.d/85-hdparm.rules
/lib/udev/rules.d/85-hwclock.rules
/lib/udev/rules.d/85-regulatory.rules
/lib/udev/rules.d/90-alsa-restore.rules
/lib/udev/rules.d/95-upower-csr.rules
/lib/udev/rules.d/95-upower-hid.rules
/lib/udev/rules.d/95-upower-wup.rules
/lib/udev/rules.d/99-saned.rules
/lib/udev/rules.d/99-systemd.rules
Regards
Stefan Lippers-Hollmann
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nforce4.log.gz
Type: application/gzip
Size: 10579 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/pkg-lvm-maintainers/attachments/20150731/a86568f1/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: Digitale Signatur von OpenPGP
URL: <http://lists.alioth.debian.org/pipermail/pkg-lvm-maintainers/attachments/20150731/a86568f1/attachment-0001.sig>
More information about the pkg-lvm-maintainers
mailing list