Bug#536644: initramfs-tools: Boot failure from software-RAID1 with debian Lenny
D. North
rold5 at tditx.com
Mon Jul 13 23:55:21 UTC 2009
[sorry -- here's the bug tracker post -- accidentally sent it direct to Martin]
Thus spake martin f krafft (madduck at debian.org):
> also sprach D. North <rold5 at tditx.com> [2009.07.13.0023 +0200]:
> > > Do you have multipaths?
> >
> > The multipath tools are installed -- but I don't think they're required. The
> > selected packages for this system came from a package list on an etch system
> > which this machine is replacing.
>
> I have to ask: does the problem persist if you deinstall the
> package (multipath-tools-boot)?
That seems to have done the trick .... My machine is quite happy now.
I've rebooted successfully 7+ times now including a couple of cold
starts - all with expected successful raid1 starts - both md's.
In an effort to provide some more useful information, I went ahead and
re-tested with debug enabled and set up a serial session to capture
the console port -- which I've included below.
There are two bootup sequences here - both are failures in one way or another.
Fwiw, it looks to me like whatever creates /dev/dm-{x} isn't completing all
the time for some reason & mdadm is not happy when asked to assemble itself.
On the first boot, it failed entirely to find one of the SATA drives. [I
tried to do a udev trigger and udev settle, but I forgot the timeout param on
the settle & locked myself out... -- I then tried plugging in a usb device
hoping to kick the settle out, but it didn'w work]. On the second log, startup
missed one member of /dev/md0, but md1 came up fine.
For me, this issue is solved, but if you have any interest in pursuing further
debug work, I could continue to collect information for a couple of days -- I'm
quite behind where I wanted to be in getting this new machine built out, but it
can wait a little while longer if it's of any value to you....
Thanks for your assistance!
-------------- next part --------------
Press any key to continue.
[H[J
GNU GRUB version 0.97 (639K lower / 2055944K upper memory)
root (hd0,0)
Filesystem type is ext2fs, partition type 0xfd
kernel /vmlinuz-2.6.26-2-686 root=/dev/md1 console=tty0 console=ttyS0,9600n8 r
ootdelay=5 ro quiet debug
[Linux-bzImage, setup=0x3000, size=0x16c910]
initrd /initrd.img-2.6.26-2-686.FAIL
[Linux-initrd @ 0x378d1000, 0x71ee7b bytes]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17) (dannf at debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:57:38 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d8c2000 (usable)
[ 0.000000] BIOS-e820: 000000007d8c2000 - 000000007d904000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007d904000 - 000000007da43000 (reserved)
[ 0.000000] BIOS-e820: 000000007da43000 - 000000007da57000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007da57000 - 000000007db55000 (reserved)
[ 0.000000] BIOS-e820: 000000007db55000 - 000000007db56000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007db56000 - 000000007db5f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007db5f000 - 000000007db69000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007db69000 - 000000007db88000 (reserved)
[ 0.000000] BIOS-e820: 000000007db88000 - 000000007db8e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007db8e000 - 000000007dd00000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 1117MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00fd480] 000fd480
[ 0.000000] Entering add_active_range(0, 0, 515328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 515328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 515328
[ 0.000000] On node 0 totalpages: 515328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2234 pages used for memmap
[ 0.000000] HighMem zone: 283718 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
[ 0.000000] ACPI: XSDT 7DB5DE18, 0044 (r1 INTEL DG41RQ 7 MSFT 10013)
[ 0.000000] ACPI: FACP 7DB5CD98, 00F4 (r4 INTEL DG41RQ 7 MSFT 10013)
[ 0.000000] ACPI: DSDT 7DB56018, 5B7A (r1 INTEL DG41RQ 7 INTL 20051117)
[ 0.000000] ACPI: FACS 7DB65F40, 0040
[ 0.000000] ACPI: APIC 7DB5CF18, 006C (r2 INTEL DG41RQ 7 MSFT 10013)
[ 0.000000] ACPI: MCFG 7DB67E18, 003C (r1 INTEL DG41RQ 7 MSFT 97)
[ 0.000000] ACPI: HPET 7DB67D98, 0038 (r1 INTEL DG41RQ 7 AMI. 3)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7dd00000:80f00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511302
[ 0.000000] Kernel command line: root=/dev/md1 console=tty0 console=ttyS0,9600n8 rootdelay=5 ro quiet debug
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 2666.730 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2029588k/2061312k available (1769k kernel code, 27664k reserved, 751k data, 244k init, 1140944k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba66b - 0xc0376620 ( 751 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba66b (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.008000] spurious 8259A interrupt: IRQ7.
[ 0.088819] Calibrating delay using timer specific routine.. 5340.13 BogoMIPS (lpj=10680270)
[ 0.100006] Security Framework initialized
[ 0.104006] SELinux: Disabled at boot.
[ 0.108006] Capability LSM initialized
[ 0.112007] Mount-cache hash table entries: 512
[ 0.116007] Initializing cgroup subsys ns
[ 0.120007] Initializing cgroup subsys cpuacct
[ 0.124007] Initializing cgroup subsys devices
[ 0.128008] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.136008] CPU: L2 cache: 4096K
[ 0.140008] CPU: Physical Processor ID: 0
[ 0.144009] CPU: Processor Core ID: 0
[ 0.148009] Intel machine check architecture supported.
[ 0.152009] Intel machine check reporting enabled on CPU#0.
[ 0.156009] using mwait in idle threads.
[ 0.160010] Checking 'hlt' instruction... OK.
[ 0.184011] ACPI: Core revision 20080321
[ 0.192107] ENABLING IO-APIC IRQs
[ 0.200012] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.243641] CPU0: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b
[ 0.256016] Booting processor 1/1 ip 6000
[ 0.268016] Initializing CPU#1
[ 0.268016] Calibrating delay using timer specific routine.. 5333.17 BogoMIPS (lpj=10666356)
[ 0.268016] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.268016] CPU: L2 cache: 4096K
[ 0.268016] CPU: Physical Processor ID: 0
[ 0.268016] CPU: Processor Core ID: 1
[ 0.268016] Intel machine check architecture supported.
[ 0.268016] Intel machine check reporting enabled on CPU#1.
[ 0.348021] CPU1: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b
[ 0.360022] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.364022] Booting processor 2/2 ip 6000
[ 0.380023] Initializing CPU#2
[ 0.380023] Calibrating delay using timer specific routine.. 5333.20 BogoMIPS (lpj=10666405)
[ 0.380023] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.380023] CPU: L2 cache: 4096K
[ 0.380023] CPU: Physical Processor ID: 0
[ 0.380023] CPU: Processor Core ID: 2
[ 0.380023] Intel machine check architecture supported.
[ 0.380023] Intel machine check reporting enabled on CPU#2.
[ 0.457735] CPU2: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b
[ 0.472029] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.476029] Booting processor 3/3 ip 6000
[ 0.492030] Initializing CPU#3
[ 0.492030] Calibrating delay using timer specific routine.. 5333.20 BogoMIPS (lpj=10666406)
[ 0.492030] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.492030] CPU: L2 cache: 4096K
[ 0.492030] CPU: Physical Processor ID: 0
[ 0.492030] CPU: Processor Core ID: 3
[ 0.492030] Intel machine check architecture supported.
[ 0.492030] Intel machine check reporting enabled on CPU#3.
[ 0.572282] CPU3: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b
[ 0.586672] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.590672] Brought up 4 CPUs
[ 0.594672] Total of 4 processors activated (21339.71 BogoMIPS).
[ 0.598672] CPU0 attaching sched-domain:
[ 0.602672] domain 0: span 0-1
[ 0.610672] groups: 0 1
[ 0.621213] domain 1: span 0-3
[ 0.630672] groups: 0-1 2-3
[ 0.642672] CPU1 attaching sched-domain:
[ 0.646672] domain 0: span 0-1
[ 0.654672] groups: 1 0
[ 0.662672] domain 1: span 0-3
[ 0.670672] groups: 0-1 2-3
[ 0.682672] CPU2 attaching sched-domain:
[ 0.686672] domain 0: span 2-3
[ 0.694672] groups: 2 3
[ 0.702672] domain 1: span 0-3
[ 0.710672] groups: 2-3 0-1
[ 0.722672] CPU3 attaching sched-domain:
[ 0.726672] domain 0: span 2-3
[ 0.734671] groups: 3 2
[ 0.742671] domain 1: span 0-3
[ 0.750671] groups: 2-3 0-1
[ 0.762672] net_namespace: 660 bytes
[ 0.766671] Booting paravirtualized kernel on bare hardware
[ 0.770671] NET: Registered protocol family 16
[ 0.774672] ACPI: bus type pci registered
[ 0.778968] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.783005] PCI: Not using MMCONFIG.
[ 0.800584] PCI: Using configuration type 1 for base access
[ 0.804812] Setting up standard PCI resources
[ 0.814789] ACPI: EC: Look up EC in DSDT
[ 0.822789] ACPI: BIOS _OSI(Linux) query ignored
[ 0.826789] ACPI: DMI System Vendor:
[ 0.830789] ACPI: DMI Product Name:
[ 0.834789] ACPI: DMI Product Version:
[ 0.838789] ACPI: DMI Board Name: DG41RQ
[ 0.842789] ACPI: DMI BIOS Vendor: Intel Corp.
[ 0.846789] ACPI: DMI BIOS Date: 12/25/2008
[ 0.850789] ACPI: Please send DMI info above to linux-acpi at vger.kernel.org
[ 0.854789] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi at vger.kernel.org
[ 0.858789] ACPI: Interpreter enabled
[ 0.862789] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.880448] ACPI: Using IOAPIC for interrupt routing
[ 0.886835] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.894789] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.898789] PCI: Using MMCONFIG for extended config space
[ 0.912970] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.916971] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.921275] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.925275] PCI: Transparent bridge - 0000:00:1e.0
[ 0.929275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.933275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.937275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.941275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.957271] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.991388] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.032862] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 1.065554] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.100696] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.141221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.182252] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.220752] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 1.255257] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.259257] pnp: PnP ACPI init
[ 1.263257] ACPI: bus type pnp registered
[ 1.267257] pnp: PnP ACPI: found 13 devices
[ 1.271257] ACPI: ACPI bus type pnp unregistered
[ 1.275257] PnPBIOS: Disabled by ACPI PNP
[ 1.279257] PCI: Using ACPI for IRQ routing
[ 1.292696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.308646] hpet0: 3 64-bit timers, 14318180 Hz
[ 1.312646] ACPI: RTC can wake from S4
[ 1.316647] Switched to high resolution mode on CPU 0
[ 1.316681] Switched to high resolution mode on CPU 3
[ 1.317102] Switched to high resolution mode on CPU 2
[ 1.317103] Switched to high resolution mode on CPU 1
[ 1.744353] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 1.829558] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.914826] system 00:02: ioport range 0x800-0x87f has been reserved
[ 1.990748] system 00:02: ioport range 0x480-0x4bf has been reserved
[ 2.066676] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 2.157395] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[ 2.242646] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 2.332071] system 00:02: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 2.422184] system 00:02: iomem range 0xff000000-0xffffffff could not be reserved
[ 2.511605] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 2.782173] PCI: Bridge: 0000:00:1c.0
[ 2.826163] IO window: disabled.
[ 2.870178] MEM window: disabled.
[ 2.912277] PREFETCH window: disabled.
[ 2.958085] PCI: Bridge: 0000:00:1c.1
[ 3.001855] IO window: e000-efff
[ 3.042519] MEM window: 0xd0400000-0xd04fffff
[ 3.097742] PREFETCH window: disabled.
[ 3.150180] PCI: Bridge: 0000:00:1e.0
[ 3.194559] IO window: disabled.
[ 3.235129] MEM window: disabled.
[ 3.277758] PREFETCH window: disabled.
[ 3.323583] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.426179] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 3.498663] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 3.590178] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 3.665491] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 3.740639] NET: Registered protocol family 2
[ 3.834223] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 3.919692] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 4.008322] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.087412] TCP: Hash tables configured (established 131072 bind 65536)
[ 4.166432] TCP reno registered
[ 4.210724] NET: Registered protocol family 1
[ 4.262871] checking if image is initramfs... it is
[ 4.743839] Freeing initrd memory: 7291k freed
[ 4.843841] audit: initializing netlink socket (disabled)
[ 5.268807] type=2000 audit(1247526092.433:1): initialized
[ 5.338239] highmem bounce pool size: 64 pages
[ 5.390245] Total HugeTLB memory allocated, 0
[ 5.443897] VFS: Disk quotas dquot_6.5.1
[ 5.520593] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.642625] msgmni has been set to 1751
[ 5.704462] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 7.064954] io scheduler noop registered
[ 7.109675] io scheduler anticipatory registered
[ 7.164953] io scheduler deadline registered
[ 7.216970] io scheduler cfq registered (default)
[ 7.273181] pci 0000:00:02.0: Boot video device
[ 7.359190] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 7.431226] assign_interrupt_mode Found MSI capability
[ 7.559224] Allocate Port Service[0000:00:1c.0:pcie00]
[ 7.624929] Allocate Port Service[0000:00:1c.0:pcie02]
[ 7.688762] Allocate Port Service[0000:00:1c.0:pcie03]
[ 7.750327] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 7.825354] assign_interrupt_mode Found MSI capability
[ 7.885650] Allocate Port Service[0000:00:1c.1:pcie00]
[ 7.948749] Allocate Port Service[0000:00:1c.1:pcie02]
[ 8.010315] Allocate Port Service[0000:00:1c.1:pcie03]
[ 8.465232] isapnp: Scanning for PnP cards...
[ 8.870586] isapnp: No Plug & Play device found
[ 8.927599] hpet_resources: 0xfed00000 is busy
[ 8.985745] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.078528] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.150590] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.218596] brd: module loaded
[ 9.260598] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 9.332605] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 9.450414] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.510397] mice: PS/2 mouse device common for all mice
[ 9.573004] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 9.645027] rtc0: alarms up to one month, y3k
[ 9.698318] cpuidle: using governor ladder
[ 9.751404] cpuidle: using governor menu
[ 9.767404] input: AT Translated Set 2 keyboard as /class/input/input0
[ 10.664582] No iBFT detected.
[ 10.700852] TCP cubic registered
[ 10.743035] NET: Registered protocol family 17
[ 10.795043] Using IPI No-Shortcut mode
[ 10.841206] registered taskstats version 1
[ 10.889312] rtc_cmos 00:08: setting system clock to 2009-07-13 23:01:50 UTC (1247526110)
[ 10.988447] Freeing unused kernel memory: 244k freed
Loading, please wait...
[ 11.119359] ACPI: SSDT 7DB60C18, 02CC (r1 AMI IST 1 MSFT 3000001)
[ 11.212393] ACPI: ACPI0007:00 is registered as cooling_device0
[ 11.282377] ACPI: ACPI0007:01 is registered as cooling_device1
[ 11.407966] ACPI: ACPI0007:02 is registered as cooling_device2
[ 11.479089] ACPI: ACPI0007:03 is registered as cooling_device3
[ 11.641309] usbcore: registered new interface driver usbfs
[ 11.739744] usbcore: registered new interface driver hub
[ 11.803744] usbcore: registered new device driver usb
[ 11.917976] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 11.998033] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 12.086614] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 12.162023] r8169 0000:02:00.0: unknown MAC (2b1000c0)
[ 12.224582] eth0: RTL8169 at 0xf882a000, 00:1c:c0:c1:ad:e5, XID 281000c0 IRQ 221
[ 12.315170] USB Universal Host Controller Interface driver v3.0
[ 12.456154] Uniform Multi-Platform E-IDE driver
[ 12.539448] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 12.655350] FDC 0 is a post-1991 82077
[ 13.379406] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 13.965543] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.041541] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.148221] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 14.288982] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 14.378160] usb usb1: configuration #1 chosen from 1 choice
[ 14.468950] hub 1-0:1.0: USB hub found
[ 14.517884] hub 1-0:1.0: 2 ports detected
[ 14.682042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.843369] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.931375] usb usb1: Product: UHCI Host Controller
[ 14.998027] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 15.068456] usb usb1: SerialNumber: 0000:00:1d.0
[ 15.123384] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 15.211063] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 15.285950] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 15.346624] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 15.437235] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 15.522900] usb usb2: configuration #1 chosen from 1 choice
[ 15.590883] hub 2-0:1.0: USB hub found
[ 15.641623] hub 2-0:1.0: 2 ports detected
[ 15.790312] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.914294] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.999684] usb usb2: Product: UHCI Host Controller
[ 16.082303] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 16.153051] usb usb2: SerialNumber: 0000:00:1d.1
[ 16.210975] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 16.299264] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 16.371721] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 16.434791] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 16.527948] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 16.600755] usb usb3: configuration #1 chosen from 1 choice
[ 16.671511] hub 3-0:1.0: USB hub found
[ 16.720434] hub 3-0:1.0: 2 ports detected
[ 16.872485] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.996467] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.081840] usb usb3: Product: UHCI Host Controller
[ 17.420448] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 17.491199] usb usb3: SerialNumber: 0000:00:1d.2
[ 17.559211] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 17.611218] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 17.727603] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 17.854476] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 17.953322] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 18.093335] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 18.181460] usb usb4: configuration #1 chosen from 1 choice
[ 18.246959] usb 3-2: configuration #1 chosen from 1 choice
[ 18.264335] hub 4-0:1.0: USB hub found
[ 18.264338] hub 4-0:1.0: 2 ports detected
[ 18.366937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.366939] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.366940] usb usb4: Product: UHCI Host Controller
[ 18.366941] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 18.366942] usb usb4: SerialNumber: 0000:00:1d.3
[ 18.965032] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 18.965032] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 18.965032] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 18.965032] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 18.969124] ehci_hcd 0000:00:1d.7: debug port 1
[ 18.969130] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 18.969134] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0504000
[ 18.981506] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 18.981506] usb usb5: configuration #1 chosen from 1 choice
[ 18.981506] hub 5-0:1.0: USB hub found
[ 18.981506] hub 5-0:1.0: 8 ports detected
[ 19.085006] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 19.085006] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.085006] usb usb5: Product: EHCI Host Controller
[ 19.085006] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 19.085006] usb usb5: SerialNumber: 0000:00:1d.7
[ 22.581580] ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1
[ 22.581580] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 22.581580] ICH7: not 100% native mode: will probe irqs later
[ 22.581580] ICH7: IDE port disabled
[ 22.581580] ide0: BM-DMA at 0xf0f0-0xf0f7
[ 22.581580] Probing IDE interface ide0...
[ 22.972207] usb 3-2: can't set config #1, error -71
[ 22.581580] No dock devices found.
[ 22.972207] usb 3-2: New USB device found, idVendor=046d, idProduct=c402
[ 22.972207] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 22.972207] usb 3-2: Product: USB-PS/2 Trackball
[ 22.972207] usb 3-2: Manufacturer: Logitech
[ 22.972207] usb 3-2: USB disconnect, address 2
[ 22.581580] SCSI subsystem initialized
[ 22.581580] libata version 3.00 loaded.
[ 22.972208] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 23.767545] hda: PIONEER DVD-RW DVR-115D, ATAPI CD/DVD-ROM drive
[ 24.132179] usb 3-2: configuration #1 chosen from 1 choice
[ 24.234189] usb 3-2: New USB device found, idVendor=046d, idProduct=c402
[ 24.332867] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 24.420874] usb 3-2: Product: USB-PS/2 Trackball
[ 24.474351] usb 3-2: Manufacturer: Logitech
[ 24.526350] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 24.674349] hda: UDMA/66 mode selected
[ 24.723647] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.779657] usbcore: registered new interface driver hiddev
[ 24.845692] ata_piix 0000:00:1f.2: version 2.12
[ 24.901684] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 24.990254] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 25.054577] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 25.129923] scsi0 : ata_piix
[ 25.164327] input: Logitech USB-PS/2 Trackball as /class/input/input1
[ 25.164654] scsi1 : ata_piix
[ 25.164770] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
[ 25.164772] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
[ 25.356492] ata1.00: HPA detected: current 2930277168, native 18446744072344861488
[ 25.356492] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 25.356492] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 25.686304] ata1.00: configured for UDMA/133
[ 25.749700] input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.2-2
[ 25.856756] usbcore: registered new interface driver usbhid
[ 25.951397] usbhid: v2.6:USB HID core driver
[ 25.955600] ata2.00: HPA detected: current 2930277168, native 18446744072344861488
[ 25.955604] ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 25.955606] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 26.015302] ata2.00: configured for UDMA/133
[ 26.016925] scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 26.016925] scsi 1:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 26.504291] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[ 26.582612] Uniform CD-ROM driver Revision: 3.20
[ 26.636229] Driver 'sd' needs updating - please use bus_type methods
[ 26.716370] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
[ 26.800424] sd 0:0:0:0: [sda] Write Protect is off
[ 26.882636] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.944544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.052613] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
[ 27.139927] sd 0:0:0:0: [sda] Write Protect is off
[ 27.202652] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.263001] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.372535] sda: sda1 sda2
[ 27.474319] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.529597] sd 1:0:0:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB)
[ 27.617702] sd 1:0:0:0: [sdb] Write Protect is off
[ 27.674939] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 27.735287] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.843438] sd 1:0:0:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB)
[ 27.930769] sd 1:0:0:0: [sdb] Write Protect is off
[ 27.990923] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 28.051306] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.159397] sdb: sdb1 sdb2
[ 28.252024] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 34.259444] device-mapper: uevent: version 1.0.3
[ 34.318613] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel at redhat.com
[ 34.421765] device-mapper: multipath: version 1.0.5 loaded
[ 34.491855] device-mapper: multipath emc: version 0.0.3 loaded
[ 34.586008] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 34.912585] md: raid1 personality registered for level 1
[ 34.984922] md: md0 stopped.
[ 35.026701] device-mapper: table: 254:2: linear: dm-linear: Device lookup failed
[ 35.118083] device-mapper: ioctl: error adding target to table
[ 35.190399] device-mapper: table: 254:2: linear: dm-linear: Device lookup failed
[ 35.279107] device-mapper: ioctl: error adding target to table
[ 35.279839] md: md1 stopped.
BusyBox v1.10.2 (Debian 1:1.10.2-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) ls /dev/dm
ls: /dev/dm: No such file or directory
(initramfs) mdadm --assemble --scan
[ 79.314465] md: md0 stopped.
mdadm: no device[ 79.352992] md: md1 stopped.
s found for /dev[ 79.510615] md: bind<dm-3>
/md0
[ 79.564403] raid1: raid set md1 active with 1 out of 2 mirrors
mdadm: /dev/md1 has been started with 1 drive (out of 2).
(initramfs) cat /etc/mdadm/mdadm.conf
DEVICE partitions
ARRAY /dev/md0 level=raid1 num-devices=2 UUID=abdd9eb3:faeb7c80:e30e8841:87878c43
ARRAY /dev/md1 level=raid1 num-devices=2 UUID=8d97d0a5:41763dfc:34b6d411:a56b552d
(initramfs) cat /proc/mdstat
Personalities : [raid1]
md1 : active (auto-read-only) raid1 dm-3[1]
29302464 blocks [2/1] [_U]
unused devices: <none>
(initramfs) ls /dev
bsg rtc tty42
bus rtc0 tty43
cdrom sda tty44
cdrw sda1 tty45
console sda2 tty46
cpu_dma_latency sdb tty47
disk sdb1 tty48
dm-0 sdb2 tty49
dm-1 snapshot tty5
dm-2 tty tty50
dm-3 tty0 tty51
dvd tty1 tty52
full tty10 tty53
hda tty11 tty54
hidraw0 tty12 tty55
hpet tty13 tty56
input tty14 tty57
kmem tty15 tty58
kmsg tty16 tty59
mapper tty17 tty6
md tty18 tty60
md0 tty19 tty61
md1 tty2 tty62
mem tty20 tty63
network_latency tty21 tty7
network_throughput tty22 tty8
null tty23 tty9
port tty24 ttyS0
psaux tty25 ttyS1
ptmx tty26 ttyS2
ram0 tty27 ttyS3
ram1 tty28 urandom
ram10 tty29 usbdev1.1_ep00
ram11 tty3 usbdev1.1_ep81
ram12 tty30 usbdev2.1_ep00
ram13 tty31 usbdev2.1_ep81
ram14 tty32 usbdev3.1_ep00
ram15 tty33 usbdev3.1_ep81
ram2 tty34 usbdev3.3_ep00
ram3 tty35 usbdev3.3_ep81
ram4 tty36 usbdev4.1_ep00
ram5 tty37 usbdev4.1_ep81
ram6 tty38 usbdev5.1_ep00
ram7 tty39 usbdev5.1_ep81
ram8 tty4 vcs
ram9 tty40 vcsa
random tty41 zero
(initramfs) vol_id /dev/dm-0
/bin/sh: vol_id: not found
(initramfs) /lib/udev/vol_id /dev/dm-0
/dev/dm-0: unknown volume type
(initramfs) (initramfs) /lib/udev/vol_id /dev/dm-0
/dev/dm-1: unknown volume type
(initramfs) (initramfs) /lib/udev/vol_id /dev/dm-1
ID_FS_USAGE=raid
ID_FS_TYPE=linux_raid_member
ID_FS_VERSION=0.90.0
ID_FS_UUID=abdd9eb3:faeb7c80:34b6d411:a56b552d
ID_FS_UUID_ENC=abdd9eb3:faeb7c80:34b6d411:a56b552d
ID_FS_LABEL=
ID_FS_LABEL_ENC=
ID_FS_LABEL_SAFE=
(initramfs) (initramfs) /lib/udev/vol_id /dev/dm-2
ID_FS_USAGE=raid
ID_FS_TYPE=linux_raid_member
ID_FS_VERSION=0.90.0
ID_FS_UUID=8d97d0a5:41763dfc:34b6d411:a56b552d
ID_FS_UUID_ENC=8d97d0a5:41763dfc:34b6d411:a56b552d
ID_FS_LABEL=
ID_FS_LABEL_ENC=
ID_FS_LABEL_SAFE=
(initramfs) ls -l /dev/mapper
brw-rw---- 1 0 6 254, 0 Jul 13 23:02 SATA_ST31500341AS_9VS18N0F
brw-rw---- 1 0 6 254, 1 Jul 13 23:02 SATA_ST31500341AS_9VS1W0L7
brw-rw---- 1 0 6 254, 2 Jul 13 23:02 SATA_ST31500341AS_9VS1W0L7-part1
brw-rw---- 1 0 6 254, 3 Jul 13 23:02 SATA_ST31500341AS_9VS1W0L7-part2
crw-rw---- 1 0 0 10, 60 Jul 13 23:02 control
(initramfs) (initramfs) udevadm trigger
(initramfs) udevadm settle
^C[ 508.928926] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 509.609464] usb 1-2: not running at top speed; connect to a high speed hub
[ 509.839681] usb 1-2: configuration #1 chosen from 1 choice
[ 509.939100] usb 1-2: New USB device found, idVendor=090c, idProduct=1000
[ 510.016459] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 510.104459] usb 1-2: Product: Flash Disk
[ 510.149942] usb 1-2: Manufacturer: USB 2.0
[ 510.200941] usb 1-2: SerialNumber: AB00000000105167
[ 522.420531] usb 1-2: USB disconnect, address 2
[ 551.634133] md: stopping all md devices.
[ 551.712537] md: md1 switched to read-only mode.
[ 553.803539] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 553.865824] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 554.375512] Restarting system.
[ 554.436475] machine restart
Press any key to continue.
-------------- next part --------------
root (hd0,0)
Filesystem type is ext2fs, partition type 0xfd
kernel /vmlinuz-2.6.26-2-686 root=/dev/md1 console=tty0 console=ttyS0,9600n8 r
ootdelay=5 ro quiet debug
[Linux-bzImage, setup=0x3000, size=0x16c910]
initrd /initrd.img-2.6.26-2-686.FAIL
[Linux-initrd @ 0x378d1000, 0x71ee7b bytes]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17) (dannf at debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:57:38 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d8c2000 (usable)
[ 0.000000] BIOS-e820: 000000007d8c2000 - 000000007d904000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007d904000 - 000000007da43000 (reserved)
[ 0.000000] BIOS-e820: 000000007da43000 - 000000007da57000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007da57000 - 000000007db55000 (reserved)
[ 0.000000] BIOS-e820: 000000007db55000 - 000000007db56000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007db56000 - 000000007db5f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007db5f000 - 000000007db69000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007db69000 - 000000007db88000 (reserved)
[ 0.000000] BIOS-e820: 000000007db88000 - 000000007db8e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007db8e000 - 000000007dd00000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 1117MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00fd450] 000fd450
[ 0.000000] Entering add_active_range(0, 0, 515328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 515328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 515328
[ 0.000000] On node 0 totalpages: 515328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2234 pages used for memmap
[ 0.000000] HighMem zone: 283718 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
[ 0.000000] ACPI: XSDT 7DB5DE18, 0044 (r1 INTEL DG41RQ 7 MSFT 10013)
[ 0.000000] ACPI: FACP 7DB5CD98, 00F4 (r4 INTEL DG41RQ 7 MSFT 10013)
[ 0.000000] ACPI: DSDT 7DB56018, 5B7A (r1 INTEL DG41RQ 7 INTL 20051117)
[ 0.000000] ACPI: FACS 7DB65F40, 0040
[ 0.000000] ACPI: APIC 7DB5CF18, 006C (r2 INTEL DG41RQ 7 MSFT 10013)
[ 0.000000] ACPI: MCFG 7DB67E18, 003C (r1 INTEL DG41RQ 7 MSFT 97)
[ 0.000000] ACPI: HPET 7DB67D98, 0038 (r1 INTEL DG41RQ 7 AMI. 3)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7dd00000:80f00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511302
[ 0.000000] Kernel command line: root=/dev/md1 console=tty0 console=ttyS0,9600n8 rootdelay=5 ro quiet debug
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 2666.630 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2029588k/2061312k available (1769k kernel code, 27664k reserved, 751k data, 244k init, 1140944k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba66b - 0xc0376620 ( 751 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba66b (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.008000] spurious 8259A interrupt: IRQ7.
[ 0.089013] Calibrating delay using timer specific routine.. 5340.09 BogoMIPS (lpj=10680195)
[ 0.100006] Security Framework initialized
[ 0.104006] SELinux: Disabled at boot.
[ 0.108006] Capability LSM initialized
[ 0.112007] Mount-cache hash table entries: 512
[ 0.116007] Initializing cgroup subsys ns
[ 0.120007] Initializing cgroup subsys cpuacct
[ 0.124007] Initializing cgroup subsys devices
[ 0.128008] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.136008] CPU: L2 cache: 4096K
[ 0.140008] CPU: Physical Processor ID: 0
[ 0.144009] CPU: Processor Core ID: 0
[ 0.148009] Intel machine check architecture supported.
[ 0.152009] Intel machine check reporting enabled on CPU#0.
[ 0.156009] using mwait in idle threads.
[ 0.160010] Checking 'hlt' instruction... OK.
[ 0.184011] ACPI: Core revision 20080321
[ 0.192107] ENABLING IO-APIC IRQs
[ 0.200012] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.243745] CPU0: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b
[ 0.256016] Booting processor 1/1 ip 6000
[ 0.268016] Initializing CPU#1
[ 0.268016] Calibrating delay using timer specific routine.. 5333.17 BogoMIPS (lpj=10666357)
[ 0.268016] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.268016] CPU: L2 cache: 4096K
[ 0.268016] CPU: Physical Processor ID: 0
[ 0.268016] CPU: Processor Core ID: 1
[ 0.268016] Intel machine check architecture supported.
[ 0.268016] Intel machine check reporting enabled on CPU#1.
[ 0.348021] CPU1: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b
[ 0.360022] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.364022] Booting processor 2/2 ip 6000
[ 0.380023] Initializing CPU#2
[ 0.380023] Calibrating delay using timer specific routine.. 5333.19 BogoMIPS (lpj=10666397)
[ 0.380023] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.380023] CPU: L2 cache: 4096K
[ 0.380023] CPU: Physical Processor ID: 0
[ 0.380023] CPU: Processor Core ID: 2
[ 0.380023] Intel machine check architecture supported.
[ 0.380023] Intel machine check reporting enabled on CPU#2.
[ 0.457969] CPU2: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b
[ 0.472029] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.476029] Booting processor 3/3 ip 6000
[ 0.492030] Initializing CPU#3
[ 0.492030] Calibrating delay using timer specific routine.. 5333.19 BogoMIPS (lpj=10666389)
[ 0.492030] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.492030] CPU: L2 cache: 4096K
[ 0.492030] CPU: Physical Processor ID: 0
[ 0.492030] CPU: Processor Core ID: 3
[ 0.492030] Intel machine check architecture supported.
[ 0.492030] Intel machine check reporting enabled on CPU#3.
[ 0.572521] CPU3: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b
[ 0.586677] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.590677] Brought up 4 CPUs
[ 0.594677] Total of 4 processors activated (21339.66 BogoMIPS).
[ 0.598677] CPU0 attaching sched-domain:
[ 0.602677] domain 0: span 0-1
[ 0.610677] groups: 0 1
[ 0.621238] domain 1: span 0-3
[ 0.630677] groups: 0-1 2-3
[ 0.642677] CPU1 attaching sched-domain:
[ 0.646677] domain 0: span 0-1
[ 0.654677] groups: 1 0
[ 0.662677] domain 1: span 0-3
[ 0.670677] groups: 0-1 2-3
[ 0.682677] CPU2 attaching sched-domain:
[ 0.686677] domain 0: span 2-3
[ 0.694677] groups: 2 3
[ 0.702677] domain 1: span 0-3
[ 0.710677] groups: 2-3 0-1
[ 0.722677] CPU3 attaching sched-domain:
[ 0.726677] domain 0: span 2-3
[ 0.734677] groups: 3 2
[ 0.742677] domain 1: span 0-3
[ 0.750677] groups: 2-3 0-1
[ 0.762677] net_namespace: 660 bytes
[ 0.766677] Booting paravirtualized kernel on bare hardware
[ 0.770677] NET: Registered protocol family 16
[ 0.774677] ACPI: bus type pci registered
[ 0.778789] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.782817] PCI: Not using MMCONFIG.
[ 0.800491] PCI: Using configuration type 1 for base access
[ 0.804723] Setting up standard PCI resources
[ 0.814744] ACPI: EC: Look up EC in DSDT
[ 0.822743] ACPI: BIOS _OSI(Linux) query ignored
[ 0.826744] ACPI: DMI System Vendor:
[ 0.830744] ACPI: DMI Product Name:
[ 0.834744] ACPI: DMI Product Version:
[ 0.838744] ACPI: DMI Board Name: DG41RQ
[ 0.842744] ACPI: DMI BIOS Vendor: Intel Corp.
[ 0.846744] ACPI: DMI BIOS Date: 12/25/2008
[ 0.850744] ACPI: Please send DMI info above to linux-acpi at vger.kernel.org
[ 0.854744] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi at vger.kernel.org
[ 0.858744] ACPI: Interpreter enabled
[ 0.862744] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.880429] ACPI: Using IOAPIC for interrupt routing
[ 0.886744] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.890744] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.894744] PCI: Using MMCONFIG for extended config space
[ 0.906743] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.913678] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.917678] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.921679] PCI: Transparent bridge - 0000:00:1e.0
[ 0.925679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.929679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.933679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.949561] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.983283] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.023701] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 1.059570] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.094230] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.142393] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.184180] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.225283] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.262346] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.266346] pnp: PnP ACPI init
[ 1.270346] ACPI: bus type pnp registered
[ 1.278346] pnp: PnP ACPI: found 13 devices
[ 1.282346] ACPI: ACPI bus type pnp unregistered
[ 1.286346] PnPBIOS: Disabled by ACPI PNP
[ 1.290346] PCI: Using ACPI for IRQ routing
[ 1.302808] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.319114] hpet0: 3 64-bit timers, 14318180 Hz
[ 1.323114] ACPI: RTC can wake from S4
[ 1.327115] Switched to high resolution mode on CPU 0
[ 1.330340] Switched to high resolution mode on CPU 3
[ 1.330339] Switched to high resolution mode on CPU 2
[ 1.331034] Switched to high resolution mode on CPU 1
[ 1.733949] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 1.819385] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.904872] system 00:02: ioport range 0x800-0x87f has been reserved
[ 1.980995] system 00:02: ioport range 0x480-0x4bf has been reserved
[ 2.057123] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 2.146994] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[ 2.232466] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 2.322131] system 00:02: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 2.411777] system 00:02: iomem range 0xff000000-0xffffffff could not be reserved
[ 2.501432] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 2.859776] PCI: Bridge: 0000:00:1c.0
[ 2.903768] IO window: disabled.
[ 2.947775] MEM window: disabled.
[ 2.989689] PREFETCH window: disabled.
[ 3.035501] PCI: Bridge: 0000:00:1e.0
[ 3.079383] IO window: disabled.
[ 3.122396] MEM window: disabled.
[ 3.163162] PREFETCH window: disabled.
[ 3.210184] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.319774] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 3.394873] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 3.511841] NET: Registered protocol family 2
[ 3.575517] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 3.661226] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 3.750104] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.829405] TCP: Hash tables configured (established 131072 bind 65536)
[ 3.908627] TCP reno registered
[ 3.952175] NET: Registered protocol family 1
[ 4.004406] checking if image is initramfs... it is
[ 4.481728] Freeing initrd memory: 7291k freed
[ 4.580637] audit: initializing netlink socket (disabled)
[ 4.668075] type=2000 audit(1247526683.093:1): initialized
[ 4.737691] highmem bounce pool size: 64 pages
[ 4.789700] Total HugeTLB memory allocated, 0
[ 4.843355] VFS: Disk quotas dquot_6.5.1
[ 4.915965] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.034200] msgmni has been set to 1751
[ 5.084129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 6.104621] io scheduler noop registered
[ 6.149350] io scheduler anticipatory registered
[ 6.204679] io scheduler deadline registered
[ 6.256636] io scheduler cfq registered (default)
[ 6.312994] pci 0000:00:02.0: Boot video device
[ 6.398625] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 6.470661] assign_interrupt_mode Found MSI capability
[ 6.598669] Allocate Port Service[0000:00:1c.0:pcie00]
[ 6.664211] Allocate Port Service[0000:00:1c.0:pcie02]
[ 6.728208] Allocate Port Service[0000:00:1c.0:pcie03]
[ 6.789801] isapnp: Scanning for PnP cards...
[ 7.195693] isapnp: No Plug & Play device found
[ 7.253962] hpet_resources: 0xfed00000 is busy
[ 7.309053] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 7.403372] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 8.227130] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 8.295453] brd: module loaded
[ 8.336900] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 8.546268] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 8.664422] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.724959] mice: PS/2 mouse device common for all mice
[ 8.790883] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 8.863131] rtc0: alarms up to one month, y3k
[ 8.916423] cpuidle: using governor ladder
[ 8.971999] cpuidle: using governor menu
[ 9.020005] No iBFT detected.
[ 9.055836] TCP cubic registered
[ 9.056008] input: AT Translated Set 2 keyboard as /class/input/input0
[ 9.425087] NET: Registered protocol family 17
[ 9.501224] Using IPI No-Shortcut mode
[ 9.550146] registered taskstats version 1
[ 9.598247] rtc_cmos 00:08: setting system clock to 2009-07-13 23:11:39 UTC (1247526699)
[ 9.695262] Freeing unused kernel memory: 244k freed
Loading, please wait...
[ 9.823681] ACPI: SSDT 7DB60C18, 02CC (r1 AMI IST 1 MSFT 3000001)
[ 9.976574] ACPI: ACPI0007:00 is registered as cooling_device0
[ 10.051380] ACPI: ACPI0007:01 is registered as cooling_device1
[ 10.121903] ACPI: ACPI0007:02 is registered as cooling_device2
[ 10.192054] ACPI: ACPI0007:03 is registered as cooling_device3
[ 10.683625] usbcore: registered new interface driver usbfs
[ 10.751650] usbcore: registered new interface driver hub
[ 10.875639] usbcore: registered new device driver usb
[ 10.936818] Uniform Multi-Platform E-IDE driver
[ 10.992843] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 11.176252] USB Universal Host Controller Interface driver v3.0
[ 11.176252] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 11.332217] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.407864] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.471935] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 11.560362] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 11.629017] usb usb1: configuration #1 chosen from 1 choice
[ 11.695881] hub 1-0:1.0: USB hub found
[ 11.740695] hub 1-0:1.0: 2 ports detected
[ 11.793662] FDC 0 is a post-1991 82077
[ 11.892588] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.996569] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.151093] usb usb1: Product: UHCI Host Controller
[ 12.209525] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 12.281529] usb usb1: SerialNumber: 0000:00:1d.0
[ 12.370023] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 12.458386] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 12.533465] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 12.593959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 12.734109] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 12.806138] usb usb2: configuration #1 chosen from 1 choice
[ 12.892883] hub 2-0:1.0: USB hub found
[ 12.940865] hub 2-0:1.0: 2 ports detected
[ 13.953421] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.082841] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.170844] usb usb2: Product: UHCI Host Controller
[ 14.229384] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 14.300320] usb usb2: SerialNumber: 0000:00:1d.1
[ 14.379812] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.468173] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.667898] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.728404] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 14.824466] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 14.897339] usb usb3: configuration #1 chosen from 1 choice
[ 14.968125] hub 3-0:1.0: USB hub found
[ 15.017050] hub 3-0:1.0: 2 ports detected
[ 15.168753] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.302143] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.394147] usb usb3: Product: UHCI Host Controller
[ 15.454151] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 15.525087] usb usb3: SerialNumber: 0000:00:1d.2
[ 15.575510] ACPI: PCI Interrupt 0000:00:1d.3[D] -> <6>usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 16.776977] GSI 16 (level, low) -> IRQ 16
[ 16.852994] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 17.516626] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 17.606226] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 17.724766] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 17.825582] usb usb4: configuration #1 chosen from 1 choice
[ 17.904320] hub 4-0:1.0: USB hub found
[ 17.972693] usb 3-2: configuration #1 chosen from 1 choice
[ 17.972693] usb 3-2: New USB device found, idVendor=046d, idProduct=c402
[ 17.972693] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 17.972693] usb 3-2: Product: USB-PS/2 Trackball
[ 17.972693] usb 3-2: Manufacturer: Logitech
[ 18.394479] hub 4-0:1.0: 2 ports detected
[ 18.571778] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.690067] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.832607] usb usb4: Product: UHCI Host Controller
[ 19.590141] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 19.661068] usb usb4: SerialNumber: 0000:00:1d.3
[ 19.732577] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 19.820941] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 19.918150] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 19.977241] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 20.329243] ehci_hcd 0000:00:1d.7: debug port 1
[ 20.385252] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 20.474173] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0404000
[ 20.553254] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.642944] usb usb5: configuration #1 chosen from 1 choice
[ 20.713930] hub 5-0:1.0: USB hub found
[ 20.753608] hub 5-0:1.0: 8 ports detected
[ 20.873640] usb 3-2: USB disconnect, address 2
[ 21.069710] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 21.218969] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.305493] usb usb5: Product: EHCI Host Controller
[ 21.374975] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 21.445904] usb usb5: SerialNumber: 0000:00:1d.7
[ 21.530972] ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1
[ 21.898549] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 21.987348] ICH7: not 100% native mode: will probe irqs later
[ 22.056086] ICH7: IDE port disabled
[ 22.098546] ide0: BM-DMA at 0xf0f0-0xf0f7
[ 22.150754] Probing IDE interface ide0...
[ 22.208541] No dock devices found.
[ 22.287767] SCSI subsystem initialized
[ 22.346658] libata version 3.00 loaded.
[ 22.464550] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 22.716799] usb 3-2: configuration #1 chosen from 1 choice
[ 22.845620] usb 3-2: New USB device found, idVendor=046d, idProduct=c402
[ 23.040185] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 23.158680] usb 3-2: Product: USB-PS/2 Trackball
[ 23.219029] hda: PIONEER DVD-RW DVR-115D, ATAPI CD/DVD-ROM drive
[ 23.307032] usb 3-2: Manufacturer: Logitech
[ 23.356513] usbcore: registered new interface driver hiddev
[ 23.446724] input: Logitech USB-PS/2 Trackball as /class/input/input1
[ 23.563338] input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.2-2
[ 23.604427] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 23.604637] hda: UDMA/66 mode selected
[ 23.605015] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 23.605015] ata_piix 0000:00:1f.2: version 2.12
[ 23.605015] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 23.605015] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 23.605015] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 23.605015] scsi0 : ata_piix
[ 24.242587] usbcore: registered new interface driver usbhid
[ 24.242565] scsi1 : ata_piix
[ 24.242565] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
[ 24.242565] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
[ 24.511394] usbhid: v2.6:USB HID core driver
[ 24.605745] ata1.00: HPA detected: current 2930277168, native 18446744072344861488
[ 24.696438] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 24.785738] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 24.924900] ata1.00: configured for UDMA/133
[ 25.239849] ata2.00: HPA detected: current 2930277168, native 18446744072344861488
[ 25.409686] ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 25.477688] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 25.590807] ata2.00: configured for UDMA/133
[ 25.663021] scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 25.852154] scsi 1:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 26.057604] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[ 26.135868] Uniform CD-ROM driver Revision: 3.20
[ 26.189520] Driver 'sd' needs updating - please use bus_type methods
[ 26.265910] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
[ 26.353145] sd 0:0:0:0: [sda] Write Protect is off
[ 26.412926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.473449] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.581896] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
[ 26.669524] sd 0:0:0:0: [sda] Write Protect is off
[ 26.726891] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.787450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.896821] sda: sda1 sda2
[ 26.943994] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.025899] sd 1:0:0:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB)
[ 27.113783] sd 1:0:0:0: [sdb] Write Protect is off
[ 27.173461] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 27.233995] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.410433] sd 1:0:0:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB)
[ 27.498416] sd 1:0:0:0: [sdb] Write Protect is off
[ 27.555796] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 27.616338] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.724710] sdb: sdb1 sdb2
[ 27.768895] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 34.254209] device-mapper: uevent: version 1.0.3
[ 34.312024] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel at redhat.com
[ 34.413128] device-mapper: multipath: version 1.0.5 loaded
[ 34.484040] device-mapper: multipath emc: version 0.0.3 loaded
[ 34.575189] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 34.677359] md: raid1 personality registered for level 1
[ 34.750506] md: md0 stopped.
[ 34.788068] md: md1 stopped.
[ 34.854529] md: bind<dm-5>
[ 34.902359] md: bind<dm-3>
[ 34.943923] raid1: raid set md1 active with 2 out of 2 mirrors
[ 35.060373] md: bind<dm-4>
[ 35.122923] raid1: raid set md0 active with 1 out of 2 mirrors
[ 35.307983] kjournald starting. Commit interval 5 seconds
[ 35.315994] EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 36.924320] udevd version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 37.323583] Linux agpgart interface v0.103
[ 37.442321] agpgart: Detected an Intel G41 Chipset.
[ 37.532747] agpgart: Detected 32764K stolen memory.
[ 37.604463] agpgart: AGP aperture is 256M @ 0xc0000000
[ 37.700913] input: Power Button (FF) as /class/input/input2
[ 37.813720] ACPI: Power Button (FF) [PWRF]
[ 37.865427] input: Power Button (CM) as /class/input/input3
[ 37.933427] input: PC Speaker as /class/input/input4
[ 38.037338] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 38.188963] ACPI: Power Button (CM) [PWRB]
[ 38.269126] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 38.368343] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 38.568087] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 38.682709] ACPI Exception (video-1631): AE_NOT_FOUND, Evaluating _DOD [20080321]
[ 38.779349] input: Video Bus as /class/input/input5
[ 38.852284] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 38.987078] intel_rng: Firmware space is locked read-only. If you can't or
[ 38.987078] intel_rng: don't want to disable this in firmware setup, and if
[ 38.987078] intel_rng: you are certain that your system has a functional
[ 38.987078] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 39.471853] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 39.602720] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 39.711549] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
done.
Setting parameters of disc: (none).
Setting the system clock.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
ROOT: clean, 201[ 41.117249] EXT3 FS on md1, 766/1831424 fileinternal journal
s, 2187112/7325616 blocks
done.
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...[ 41.381632] loop: module loaded
done.
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups Reading all physical volumes. This may take a while...
.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
BOOT: clean, 38/64256 files, 74919/256896 blocks
done.
Setting[ 42.142279] kjournald starting. Commit interval 5 seconds
kernel variable[ 42.235426] EXT3 FS on md0, s (/etc/sysctl.cinternal journal
onf)...done.
Mo[ 42.322871] EXT3-fs: mounted filesystem with ordered data mode.
unting local filesystems...done.
Activating swapfile swap...[ 46.174343] Adding 2097144k swap on /swap.sys. Priority:-1 extents:723 across:4742036k
done.
Setting up networking....
Configuring network interfaces...[ 47.718498] NET: Registered protocol family 10
[ 47.791364] lo: Disabled Privacy Extensions
done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Setting sensors limits.
Setting console screen modes and fonts.
Setting up ALSA...done.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting ACPI services....
Starting system message bus: dbus.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting domain name service...: bind9.
Starting OpenBSD Secure Shell server: sshd.
Starting MySQL database server: mysqld.
Checking for corrupt, not cleanly closed and upgrade needing tables..
Starting Common Unix Printing System: cupsd[ 52.504163] lp: driver loaded but no devices found
[ 52.638985] ppdev: user-space parallel port driver
.
Starting DirMngr: dirmngr.
Starting MTA: exim4.
Loading kvm module kvm_intel.
Starting libvirt management daemon: libvirtd.
Starting LAN Information Server: lisa.
Starting NFS common utilities: statd.
Starting internet superserver: inetd.
Starting Samba daemons: nmbd smbd.
saned disabled; edit /etc/default/saned
Starting User-mode networking switch: uml_switch.
Starting the Winbind daemon: winbind.
Not starting DSPAM Statistical anti-spam filter -- disabled.
Starting file alteration monitor: FAM.
Starting NTP server: ntpd[ 56.522629] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
.
Starting Hardware abstraction layer: hald.
Starting MD monitoring service: mdadm --monitor.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Starting web server: apache2.
Debian GNU/Linux 5.0 phoenix ttyS0
phoenix login: root
Password:
Last login: Mon Jul 13 18:10:16 CDT 2009 on ttyS0
Linux phoenix 2.6.26-2-686 #1 SMP Sun Jun 21 04:57:38 UTC 2009 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
phoenix:~# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 dm-3[0] dm-5[1]
29302464 blocks [2/2] [UU]
md0 : active raid1 dm-4[1]
256896 blocks [2/1] [_U]
unused devices: <none>
phoenix:~# ls /dev/mapper
control SATA_ST31500341AS_9VS1W0L7
SATA_ST31500341AS_9VS18N0F SATA_ST31500341AS_9VS1W0L7-part1
SATA_ST31500341AS_9VS18N0F-part1 SATA_ST31500341AS_9VS1W0L7-part2
SATA_ST31500341AS_9VS18N0F-part2
phoenix:~# ls -lah /dev/mapper
total 0
drwxr-xr-x 2 root root 180 2009-07-13 18:11 .
drwxr-xr-x 14 root root 3.8K 2009-07-13 18:12 ..
crw-rw---- 1 root root 10, 60 2009-07-13 18:11 control
brw-rw---- 1 root disk 254, 0 2009-07-13 18:11 SATA_ST31500341AS_9VS18N0F
brw-rw---- 1 root disk 254, 2 2009-07-13 18:11 SATA_ST31500341AS_9VS18N0F-part1
brw-rw---- 1 root disk 254, 3 2009-07-13 18:11 SATA_ST31500341AS_9VS18N0F-part2
brw-rw---- 1 root disk 254, 1 2009-07-13 18:11 SATA_ST31500341AS_9VS1W0L7
brw-rw---- 1 root disk 254, 4 2009-07-13 18:11 SATA_ST31500341AS_9VS1W0L7-part1
brw-rw---- 1 root disk 254, 5 2009-07-13 18:11 SATA_ST31500341AS_9VS1W0L7-part2
phoenix:~# mdadm /dev/md0 --add /dev/dm-2
[ 136.465494] md: bind<dm-2>
[ 136.506482] RAID1 conf printout:
mdadm: re-added [ 136.545158] --- wd:1 rd:2
/dev/dm-2
[ 136.595615] disk 0, wo:1, o:1, dev:dm-2
phoenix:~# [ 136.654939] disk 1, wo:0, o:1, dev:dm-4
[ 136.767707] md: recovery of RAID array md0
[ 136.909093] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 136.990980] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 137.106996] md: using 128k window, over a total of 256896 blocks.
[ 140.860169] md: md0: recovery done.
[ 140.958849] RAID1 conf printout:
[ 141.040146] --- wd:2 rd:2
[ 141.080595] disk 0, wo:0, o:1, dev:dm-2
[ 141.127605] disk 1, wo:0, o:1, dev:dm-4
phoenix:~# exit
logout
Debian GNU/Linux 5.0 phoenix ttyS0
phoenix login:
More information about the pkg-mdadm-devel
mailing list