Bug#574817: libata transition breaks mdadm arrays
Mathieu Parent
sathieu at debian.org
Sun Mar 21 11:50:42 UTC 2010
Package: linux-2.6
Version: 2.6.32-10
Severity: important
Subject: libata transition breaks mdadm arrays
Package: linux-2.6
Version: 2.6.32-10
Severity: normal
Following an upgrade to the Big bang release (2.6.32-10), my mdadm arrays stopped to work.
They were on /dev/sd{a,b,c,d} and went /dev/sd{b,c,d,e} as /dev/hda went /dev/sda.
I have to do the following at EACH boot to solve temporaly the problem:
mdadm --stop /dev/md0
mdadm --assemble /dev/md0 /dev/sd{b,c,d,e}
vgchange -ay
mount -a
Attached are the results of:
mdadm -D /dev/md0
cat /proc/mdstat
- on broken state
- after the above commands
-- Package-specific info:
** Version:
Linux version 2.6.32-4-686 (Debian 2.6.32-10) (maks at debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 17:16:41 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-4-686 root=UUID=8c592384-7266-4159-9b43-2c21c5577430 ro quiet
** Not tainted
** Kernel log:
[ 8.793959] Adding 2441808k swap on /dev/sda8. Priority:-1 extents:1 across:2441808k
[ 9.365562] EXT3 FS on sda5, internal journal
[ 72.050967] md: md0 stopped.
[ 72.050981] md: unbind<sdc>
[ 72.050991] md: export_rdev(sdc)
[ 72.051015] md: unbind<sdb>
[ 72.051020] md: export_rdev(sdb)
[ 75.718384] md: md0 stopped.
[ 75.733161] md: bind<sdd>
[ 75.733362] md: bind<sdc>
[ 75.734921] md: bind<sdb>
[ 75.735103] md: bind<sde>
[ 75.752727] raid5: device sde operational as raid disk 0
[ 75.752732] raid5: device sdb operational as raid disk 3
[ 75.752735] raid5: device sdc operational as raid disk 2
[ 75.752738] raid5: device sdd operational as raid disk 1
[ 75.753126] raid5: allocated 4222kB for md0
[ 75.758093] 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 75.758098] 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 75.758102] 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 75.758106] 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 75.758110] raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2
[ 75.758113] RAID5 conf printout:
[ 75.758115] --- rd:4 wd:4
[ 75.758119] disk 0, o:1, dev:sde
[ 75.758121] disk 1, o:1, dev:sdd
[ 75.758124] disk 2, o:1, dev:sdc
[ 75.758127] disk 3, o:1, dev:sdb
[ 75.758169] md0: detected capacity change from 0 to 960218529792
[ 75.763026] md0: unknown partition table
[ 81.430931] device-mapper: table: 254:0: adding target device (start sect 8388608 len 12582912) caused an alignment inconsistency
[ 81.585263] device-mapper: table: 254:6: adding target device (start sect 12582912 len 16777216) caused an alignment inconsistency
[ 83.195825] kjournald starting. Commit interval 5 seconds
[ 83.195992] EXT3 FS on sda2, internal journal
[ 83.195998] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.267130] kjournald starting. Commit interval 5 seconds
[ 83.267297] EXT3 FS on sda12, internal journal
[ 83.267303] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.337320] kjournald starting. Commit interval 5 seconds
[ 83.337525] EXT3 FS on sda6, internal journal
[ 83.337531] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.384938] kjournald starting. Commit interval 5 seconds
[ 83.385106] EXT3 FS on sda7, internal journal
[ 83.385112] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.460982] kjournald starting. Commit interval 5 seconds
[ 83.506327] EXT3 FS on dm-8, internal journal
[ 83.506334] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.617985] kjournald starting. Commit interval 5 seconds
[ 83.628301] EXT3 FS on dm-3, internal journal
[ 83.628308] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.735128] kjournald starting. Commit interval 5 seconds
[ 83.736478] EXT3 FS on dm-2, internal journal
[ 83.736485] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.820885] kjournald starting. Commit interval 5 seconds
[ 83.836058] EXT3 FS on dm-7, internal journal
[ 83.836066] EXT3-fs: mounted filesystem with ordered data mode.
[ 84.995074] loop: module loaded
[ 85.228506] Bridge firewalling registered
[ 85.233803] device eth0 entered promiscuous mode
[ 85.236294] skge eth0: enabling interface
[ 85.239568] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 86.904840] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 86.904989] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 86.905023] br0: port 1(eth0) entering forwarding state
[ 87.662541] RPC: Registered udp transport module.
[ 87.662545] RPC: Registered tcp transport module.
[ 87.662548] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 87.694456] Slow work thread pool: Starting up
[ 87.694513] Slow work thread pool: Ready
[ 87.694589] FS-Cache: Loaded
[ 87.743789] FS-Cache: Netfs 'nfs' registered for caching
[ 87.773217] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 88.528960] fuse init (API version 7.13)
[ 97.828005] eth0: no IPv6 routers present
[ 101.993528] Bluetooth: Core ver 2.15
[ 101.993590] NET: Registered protocol family 31
[ 101.993593] Bluetooth: HCI device and connection manager initialized
[ 101.993597] Bluetooth: HCI socket layer initialized
[ 102.062304] Bluetooth: L2CAP ver 2.14
[ 102.062308] Bluetooth: L2CAP socket layer initialized
[ 102.099616] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 102.099620] Bluetooth: BNEP filters: protocol multicast
[ 102.139696] Bluetooth: SCO (Voice Link) ver 0.6
[ 102.139700] Bluetooth: SCO socket layer initialized
[ 103.234193] lp: driver loaded but no devices found
[ 103.267215] ppdev: user-space parallel port driver
[ 104.242059] svc: failed to register lockdv1 RPC service (errno 97).
[ 104.245325] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 104.264195] NFSD: starting 90-second grace period
[ 104.306588] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 104.306609] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 104.306644] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 104.541135] [drm] Setting GART location based on new memory map
[ 104.541191] [drm] Loading R200 Microcode
[ 104.541195] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[ 104.549977] [drm] writeback test succeeded in 1 usecs
[ 104.820310] lo: Disabled Privacy Extensions
[ 117.774197] CPU0 attaching NULL sched-domain.
[ 117.774256] CPU0 attaching NULL sched-domain.
[ 215.693005] reportbug[3678]: segfault at dc ip b66f430a sp b60b4540 error 4 in libpango-1.0.so.0.2600.2[b66d3000+42000]
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
sco 5837 2
bnep 7444 2
l2cap 21677 3 bnep
crc16 1027 1 l2cap
bluetooth 36327 5 sco,bnep,l2cap
rfkill 10264 2 bluetooth
battery 3782 0
speedstep_lib 2468 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_userspace 1480 0
cpufreq_conservative 4018 0
binfmt_misc 4907 1
fuse 43758 1
nfsd 193215 13
exportfs 2618 1 nfsd
nfs 206614 0
lockd 49437 2 nfsd,nfs
fscache 24662 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25264 2 nfsd,nfs
sunrpc 134588 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge 32987 0
stp 996 1 bridge
loop 9757 0
snd_intel8x0 19523 1
snd_ac97_codec 79140 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47210 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
radeon 490030 2
joydev 6771 0
ttm 33378 1 radeon
snd_timer 12258 2 snd_pcm,snd_seq
usbhid 27980 0
hid 50629 1 usbhid
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
sg 15964 0
drm_kms_helper 18297 1 radeon
uhci_hcd 16057 0
sata_promise 7353 2
skge 29502 0
evdev 5609 16
drm 112200 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 3497 1 radeon
snd 34363 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_i801 6442 0
ehci_hcd 27582 0
sr_mod 10770 0
soundcore 3450 1 snd
psmouse 44413 0
serio_raw 2916 0
cdrom 26487 1 sr_mod
button 3598 0
pcspkr 1207 0
i2c_core 12648 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
snd_page_alloc 5045 2 snd_intel8x0,snd_pcm
shpchp 21220 0
processor 26599 0
rng_core 2178 0
usbcore 98162 4 usbhid,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
pci_hotplug 18065 1 shpchp
ext3 94200 9
jbd 32169 1 ext3
mbcache 3762 1 ext3
raid456 42408 1
md_mod 67169 2 raid456
async_raid6_recov 4042 1 raid456
async_pq 2643 2 raid456,async_raid6_recov
raid6_pq 77468 2 async_raid6_recov,async_pq
async_xor 1954 3 raid456,async_raid6_recov,async_pq
xor 12418 1 async_xor
async_memcpy 838 2 raid456,async_raid6_recov
async_tx 1326 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
sd_mod 25785 11
crc_t10dif 1012 1 sd_mod
thermal 9206 0
fan 2586 0
thermal_sys 9378 3 processor,thermal,fan
dm_mirror 9671 0
dm_region_hash 5644 1 dm_mirror
dm_log 6369 2 dm_mirror,dm_region_hash
dm_mod 46078 26 dm_mirror,dm_log
ata_generic 2015 0
ata_piix 17133 8
libata 114416 3 sata_promise,ata_generic,ata_piix
scsi_mod 101305 4 sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: d7f00000-f7efffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ef00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ef20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ef40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ef80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: b0000000-b00fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at b0100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. P4P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at efe0 [size=8]
Region 1: I/O ports at efac [size=4]
Region 2: I/O ports at efa0 [size=8]
Region 3: I/O ports at efa8 [size=4]
Region 4: I/O ports at ef60 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard [1043:80a6]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:812a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ee80 [size=64]
Region 2: Memory at febfb800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at febfb400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) (prog-if 00 [VGA controller])
Subsystem: Info-Tek Corp. Device [18bc:0610]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)
Subsystem: Info-Tek Corp. Device [18bc:0611]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 16 bytes
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:04.0 RAID bus controller [0104]: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) [105a:3373] (rev 02)
Subsystem: ASUSTeK Computer Inc. K8V Deluxe/PC-DL Deluxe motherboard [1043:80f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 576 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at df00 [size=64]
Region 1: I/O ports at dfa0 [size=16]
Region 2: I/O ports at dc00 [size=128]
Region 3: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at feac0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: sata_promise
02:05.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Expansion ROM at b0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 10d5:000d Uni Class Technology Co., Ltd
Bus 002 Device 004: ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse
Bus 002 Device 003: ID 0e6a:6001 Megawin Technology Co., Ltd
Bus 002 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (900, 'testing'), (300, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-4-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-4-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii linux-base 2.6.32-10 Linux image base package
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-4-686 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-4-686 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-4-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.22 Binary firmware for various driver
ii firmware-linux-nonfree 0.22 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-4-686/prerm/would-invalidate-boot-loader-2.6.32-4-686: true
linux-image-2.6.32-4-686/postinst/bootloader-test-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/depmod-error-initrd-2.6.32-4-686: false
linux-image-2.6.32-4-686/postinst/bootloader-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/missing-firmware-2.6.32-4-686:
linux-image-2.6.32-4-686/prerm/removing-running-kernel-2.6.32-4-686: true
-- Package-specific info:
** Version:
Linux version 2.6.32-4-686 (Debian 2.6.32-10) (maks at debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 17:16:41 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-4-686 root=UUID=8c592384-7266-4159-9b43-2c21c5577430 ro quiet
** Not tainted
** Kernel log:
[ 8.793959] Adding 2441808k swap on /dev/sda8. Priority:-1 extents:1 across:2441808k
[ 9.365562] EXT3 FS on sda5, internal journal
[ 72.050967] md: md0 stopped.
[ 72.050981] md: unbind<sdc>
[ 72.050991] md: export_rdev(sdc)
[ 72.051015] md: unbind<sdb>
[ 72.051020] md: export_rdev(sdb)
[ 75.718384] md: md0 stopped.
[ 75.733161] md: bind<sdd>
[ 75.733362] md: bind<sdc>
[ 75.734921] md: bind<sdb>
[ 75.735103] md: bind<sde>
[ 75.752727] raid5: device sde operational as raid disk 0
[ 75.752732] raid5: device sdb operational as raid disk 3
[ 75.752735] raid5: device sdc operational as raid disk 2
[ 75.752738] raid5: device sdd operational as raid disk 1
[ 75.753126] raid5: allocated 4222kB for md0
[ 75.758093] 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 75.758098] 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 75.758102] 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 75.758106] 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 75.758110] raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2
[ 75.758113] RAID5 conf printout:
[ 75.758115] --- rd:4 wd:4
[ 75.758119] disk 0, o:1, dev:sde
[ 75.758121] disk 1, o:1, dev:sdd
[ 75.758124] disk 2, o:1, dev:sdc
[ 75.758127] disk 3, o:1, dev:sdb
[ 75.758169] md0: detected capacity change from 0 to 960218529792
[ 75.763026] md0: unknown partition table
[ 81.430931] device-mapper: table: 254:0: adding target device (start sect 8388608 len 12582912) caused an alignment inconsistency
[ 81.585263] device-mapper: table: 254:6: adding target device (start sect 12582912 len 16777216) caused an alignment inconsistency
[ 83.195825] kjournald starting. Commit interval 5 seconds
[ 83.195992] EXT3 FS on sda2, internal journal
[ 83.195998] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.267130] kjournald starting. Commit interval 5 seconds
[ 83.267297] EXT3 FS on sda12, internal journal
[ 83.267303] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.337320] kjournald starting. Commit interval 5 seconds
[ 83.337525] EXT3 FS on sda6, internal journal
[ 83.337531] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.384938] kjournald starting. Commit interval 5 seconds
[ 83.385106] EXT3 FS on sda7, internal journal
[ 83.385112] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.460982] kjournald starting. Commit interval 5 seconds
[ 83.506327] EXT3 FS on dm-8, internal journal
[ 83.506334] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.617985] kjournald starting. Commit interval 5 seconds
[ 83.628301] EXT3 FS on dm-3, internal journal
[ 83.628308] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.735128] kjournald starting. Commit interval 5 seconds
[ 83.736478] EXT3 FS on dm-2, internal journal
[ 83.736485] EXT3-fs: mounted filesystem with ordered data mode.
[ 83.820885] kjournald starting. Commit interval 5 seconds
[ 83.836058] EXT3 FS on dm-7, internal journal
[ 83.836066] EXT3-fs: mounted filesystem with ordered data mode.
[ 84.995074] loop: module loaded
[ 85.228506] Bridge firewalling registered
[ 85.233803] device eth0 entered promiscuous mode
[ 85.236294] skge eth0: enabling interface
[ 85.239568] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 86.904840] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 86.904989] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 86.905023] br0: port 1(eth0) entering forwarding state
[ 87.662541] RPC: Registered udp transport module.
[ 87.662545] RPC: Registered tcp transport module.
[ 87.662548] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 87.694456] Slow work thread pool: Starting up
[ 87.694513] Slow work thread pool: Ready
[ 87.694589] FS-Cache: Loaded
[ 87.743789] FS-Cache: Netfs 'nfs' registered for caching
[ 87.773217] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 88.528960] fuse init (API version 7.13)
[ 97.828005] eth0: no IPv6 routers present
[ 101.993528] Bluetooth: Core ver 2.15
[ 101.993590] NET: Registered protocol family 31
[ 101.993593] Bluetooth: HCI device and connection manager initialized
[ 101.993597] Bluetooth: HCI socket layer initialized
[ 102.062304] Bluetooth: L2CAP ver 2.14
[ 102.062308] Bluetooth: L2CAP socket layer initialized
[ 102.099616] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 102.099620] Bluetooth: BNEP filters: protocol multicast
[ 102.139696] Bluetooth: SCO (Voice Link) ver 0.6
[ 102.139700] Bluetooth: SCO socket layer initialized
[ 103.234193] lp: driver loaded but no devices found
[ 103.267215] ppdev: user-space parallel port driver
[ 104.242059] svc: failed to register lockdv1 RPC service (errno 97).
[ 104.245325] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 104.264195] NFSD: starting 90-second grace period
[ 104.306588] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 104.306609] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 104.306644] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 104.541135] [drm] Setting GART location based on new memory map
[ 104.541191] [drm] Loading R200 Microcode
[ 104.541195] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[ 104.549977] [drm] writeback test succeeded in 1 usecs
[ 104.820310] lo: Disabled Privacy Extensions
[ 117.774197] CPU0 attaching NULL sched-domain.
[ 117.774256] CPU0 attaching NULL sched-domain.
[ 215.693005] reportbug[3678]: segfault at dc ip b66f430a sp b60b4540 error 4 in libpango-1.0.so.0.2600.2[b66d3000+42000]
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
sco 5837 2
bnep 7444 2
l2cap 21677 3 bnep
crc16 1027 1 l2cap
bluetooth 36327 5 sco,bnep,l2cap
rfkill 10264 2 bluetooth
battery 3782 0
speedstep_lib 2468 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_userspace 1480 0
cpufreq_conservative 4018 0
binfmt_misc 4907 1
fuse 43758 1
nfsd 193215 13
exportfs 2618 1 nfsd
nfs 206614 0
lockd 49437 2 nfsd,nfs
fscache 24662 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25264 2 nfsd,nfs
sunrpc 134588 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge 32987 0
stp 996 1 bridge
loop 9757 0
snd_intel8x0 19523 1
snd_ac97_codec 79140 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47210 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
radeon 490030 2
joydev 6771 0
ttm 33378 1 radeon
snd_timer 12258 2 snd_pcm,snd_seq
usbhid 27980 0
hid 50629 1 usbhid
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
sg 15964 0
drm_kms_helper 18297 1 radeon
uhci_hcd 16057 0
sata_promise 7353 2
skge 29502 0
evdev 5609 16
drm 112200 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 3497 1 radeon
snd 34363 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_i801 6442 0
ehci_hcd 27582 0
sr_mod 10770 0
soundcore 3450 1 snd
psmouse 44413 0
serio_raw 2916 0
cdrom 26487 1 sr_mod
button 3598 0
pcspkr 1207 0
i2c_core 12648 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
snd_page_alloc 5045 2 snd_intel8x0,snd_pcm
shpchp 21220 0
processor 26599 0
rng_core 2178 0
usbcore 98162 4 usbhid,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
pci_hotplug 18065 1 shpchp
ext3 94200 9
jbd 32169 1 ext3
mbcache 3762 1 ext3
raid456 42408 1
md_mod 67169 2 raid456
async_raid6_recov 4042 1 raid456
async_pq 2643 2 raid456,async_raid6_recov
raid6_pq 77468 2 async_raid6_recov,async_pq
async_xor 1954 3 raid456,async_raid6_recov,async_pq
xor 12418 1 async_xor
async_memcpy 838 2 raid456,async_raid6_recov
async_tx 1326 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
sd_mod 25785 11
crc_t10dif 1012 1 sd_mod
thermal 9206 0
fan 2586 0
thermal_sys 9378 3 processor,thermal,fan
dm_mirror 9671 0
dm_region_hash 5644 1 dm_mirror
dm_log 6369 2 dm_mirror,dm_region_hash
dm_mod 46078 26 dm_mirror,dm_log
ata_generic 2015 0
ata_piix 17133 8
libata 114416 3 sata_promise,ata_generic,ata_piix
scsi_mod 101305 4 sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: d7f00000-f7efffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ef00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ef20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ef40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ef80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: b0000000-b00fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at b0100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. P4P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at efe0 [size=8]
Region 1: I/O ports at efac [size=4]
Region 2: I/O ports at efa0 [size=8]
Region 3: I/O ports at efa8 [size=4]
Region 4: I/O ports at ef60 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard [1043:80a6]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:812a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ee80 [size=64]
Region 2: Memory at febfb800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at febfb400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) (prog-if 00 [VGA controller])
Subsystem: Info-Tek Corp. Device [18bc:0610]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)
Subsystem: Info-Tek Corp. Device [18bc:0611]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 16 bytes
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:04.0 RAID bus controller [0104]: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) [105a:3373] (rev 02)
Subsystem: ASUSTeK Computer Inc. K8V Deluxe/PC-DL Deluxe motherboard [1043:80f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 576 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at df00 [size=64]
Region 1: I/O ports at dfa0 [size=16]
Region 2: I/O ports at dc00 [size=128]
Region 3: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at feac0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: sata_promise
02:05.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Expansion ROM at b0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 10d5:000d Uni Class Technology Co., Ltd
Bus 002 Device 004: ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse
Bus 002 Device 003: ID 0e6a:6001 Megawin Technology Co., Ltd
Bus 002 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (900, 'testing'), (300, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-4-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-4-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii linux-base 2.6.32-10 Linux image base package
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-4-686 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-4-686 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-4-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.22 Binary firmware for various driver
ii firmware-linux-nonfree 0.22 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-4-686/prerm/would-invalidate-boot-loader-2.6.32-4-686: true
linux-image-2.6.32-4-686/postinst/bootloader-test-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/depmod-error-initrd-2.6.32-4-686: false
linux-image-2.6.32-4-686/postinst/bootloader-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/missing-firmware-2.6.32-4-686:
linux-image-2.6.32-4-686/prerm/removing-running-kernel-2.6.32-4-686: true
More information about the pkg-mdadm-devel
mailing list