[Pkg-mono-svn-commits] rev 3797 - in mono/trunk/debian: . patches
Mirco Bauer
meebey at alioth.debian.org
Sun Nov 23 15:42:28 UTC 2008
Author: meebey
Date: 2008-11-23 15:42:26 +0000 (Sun, 23 Nov 2008)
New Revision: 3797
Added:
mono/trunk/debian/patches/armel_fix_configure_fpu_check.dpatch
Modified:
mono/trunk/debian/changelog
mono/trunk/debian/patches/00list
mono/trunk/debian/patches/99_autoreconf.dpatch
mono/trunk/debian/rules
Log:
* debian/patches/armel_fix_configure_fpu_check.dpatch:
+ Forward ported patch from 1.2.4 to fix FTBFS on linux/armel.
* debian/patches/99_autoreconf.dpatch:
+ Updated
[ David Paleino ]
* Group Policy:
+ implemented get-orig-source target in debian/rules
Modified: mono/trunk/debian/changelog
===================================================================
--- mono/trunk/debian/changelog 2008-11-23 14:31:08 UTC (rev 3796)
+++ mono/trunk/debian/changelog 2008-11-23 15:42:26 UTC (rev 3797)
@@ -1,10 +1,5 @@
-mono (2.0.1-1~pre2) experimental; urgency=low
+mono (2.0.1-1~pre3) experimental; urgency=low
- [ Jo Shields ]
- * debian/patches/armel-glibc-2.8.dpatch:
- + Fix build failure on armel architecture on libc6 2.8 (Thanks
- to Michael Casadevall <sonicmctails at gmail.com> for the patch)
-
[ Mirco Bauer ]
* New upstream (bugfix) release.
* debian/mono-1.0-devel.manpages:
@@ -14,9 +9,22 @@
* debian/mono-devel.links:
+ Make csc a symlink to gmcs, a runtime version neutral default
compiler.
+ * debian/patches/armel_fix_configure_fpu_check.dpatch:
+ + Forward ported patch from 1.2.4 to fix FTBFS on linux/armel.
+ * debian/patches/99_autoreconf.dpatch:
+ + Updated
- -- Mirco Bauer <meebey at debian.org> Tue, 11 Nov 2008 22:31:28 +0100
+ [ Jo Shields ]
+ * debian/patches/armel-glibc-2.8.dpatch:
+ + Fix build failure on armel architecture on libc6 2.8 (Thanks
+ to Michael Casadevall <sonicmctails at gmail.com> for the patch)
+ [ David Paleino ]
+ * Group Policy:
+ + implemented get-orig-source target in debian/rules
+
+ -- Mirco Bauer <meebey at debian.org> Sun, 23 Nov 2008 16:16:00 +0100
+
mono (2.0-1) experimental; urgency=low
* New upstream release.
Modified: mono/trunk/debian/patches/00list
===================================================================
--- mono/trunk/debian/patches/00list 2008-11-23 14:31:08 UTC (rev 3796)
+++ mono/trunk/debian/patches/00list 2008-11-23 15:42:26 UTC (rev 3797)
@@ -1,3 +1,4 @@
+armel_fix_configure_fpu_check
kfreebsd_support
console-no-utf8-bom
firebird-fbclient
Modified: mono/trunk/debian/patches/99_autoreconf.dpatch
===================================================================
--- mono/trunk/debian/patches/99_autoreconf.dpatch 2008-11-23 14:31:08 UTC (rev 3796)
+++ mono/trunk/debian/patches/99_autoreconf.dpatch 2008-11-23 15:42:26 UTC (rev 3797)
@@ -6,8 +6,8 @@
@DPATCH@
diff -urNad mono-2.0.1~/aclocal.m4 mono-2.0.1/aclocal.m4
---- mono-2.0.1~/aclocal.m4 2008-11-11 23:28:32.000000000 +0100
-+++ mono-2.0.1/aclocal.m4 2008-11-11 23:28:57.000000000 +0100
+--- mono-2.0.1~/aclocal.m4 2008-10-22 19:19:52.000000000 +0200
++++ mono-2.0.1/aclocal.m4 2008-11-23 16:09:50.000000000 +0100
@@ -21,7 +21,7 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
@@ -135,9 +135,18 @@
# Put the nasty error message in config.log where it belongs
echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
diff -urNad mono-2.0.1~/configure mono-2.0.1/configure
---- mono-2.0.1~/configure 2008-11-11 23:28:32.000000000 +0100
-+++ mono-2.0.1/configure 2008-11-11 23:29:28.000000000 +0100
-@@ -2927,6 +2927,16 @@
+--- mono-2.0.1~/configure 2008-11-23 16:09:39.000000000 +0100
++++ mono-2.0.1/configure 2008-11-23 16:12:08.000000000 +0100
+@@ -1657,7 +1657,7 @@
+ --with-jit=yes,no If you want to build scripts that default to the JIT
+ --with-interp=yes,no If you want to build scripts that default to the interpreter
+ --with-x use the X Window System
+- --with-fpu=FPA,VFP,NONE Select fpu to use on arm
++ --with-fpu=FPA,VFP,NONE Select fpu to use on arm
+ --with-preview=yes,no If you want to install the 2.0 FX preview
+ --with-moonlight=yes,no If you want to build the Moonlight 2.1 assemblies
+ --with-oprofile=no,<path> Enable oprofile support (defaults to NO)
+@@ -2928,6 +2928,16 @@
libgc_threads=pthreads
with_sigaltstack=no
;;
@@ -154,7 +163,7 @@
# these flags will work for all versions of -STABLE
#
*-*-*freebsd4*)
-@@ -6411,7 +6421,7 @@
+@@ -6412,7 +6422,7 @@
lt_cv_deplibs_check_method=pass_all
;;
@@ -163,58 +172,58 @@
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
-@@ -6531,7 +6541,7 @@
+@@ -6532,7 +6542,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 6534 "configure"' > conftest.$ac_ext
-+ echo '#line 6544 "configure"' > conftest.$ac_ext
++ echo '#line 6545 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
-@@ -9468,11 +9478,11 @@
+@@ -9469,11 +9479,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9471: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9481: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9482: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:9475: \$? = $ac_status" >&5
-+ echo "$as_me:9485: \$? = $ac_status" >&5
++ echo "$as_me:9486: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-@@ -9758,11 +9768,11 @@
+@@ -9759,11 +9769,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9761: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9771: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9772: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:9765: \$? = $ac_status" >&5
-+ echo "$as_me:9775: \$? = $ac_status" >&5
++ echo "$as_me:9776: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-@@ -9862,11 +9872,11 @@
+@@ -9863,11 +9873,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9865: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:9875: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:9876: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:9869: \$? = $ac_status" >&5
-+ echo "$as_me:9879: \$? = $ac_status" >&5
++ echo "$as_me:9880: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
-@@ -10127,12 +10137,13 @@
+@@ -10128,12 +10138,13 @@
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
@@ -229,7 +238,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
-@@ -10675,7 +10686,7 @@
+@@ -10676,7 +10687,7 @@
link_all_deplibs=yes
;;
@@ -238,7 +247,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -11386,6 +11397,18 @@
+@@ -11387,6 +11398,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -257,25 +266,25 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -12226,7 +12249,7 @@
+@@ -12227,7 +12250,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 12229 "configure"
-+#line 12252 "configure"
++#line 12253 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -12326,7 +12349,7 @@
+@@ -12327,7 +12350,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 12329 "configure"
-+#line 12352 "configure"
++#line 12353 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-@@ -13914,7 +13937,7 @@
+@@ -13915,7 +13938,7 @@
;;
esac
;;
@@ -284,7 +293,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
-@@ -14618,7 +14641,7 @@
+@@ -14619,7 +14642,7 @@
;;
esac
;;
@@ -293,35 +302,35 @@
;;
osf3* | osf4* | osf5*)
case $cc_basename in
-@@ -14727,11 +14750,11 @@
+@@ -14728,11 +14751,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14730: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:14753: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:14754: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:14734: \$? = $ac_status" >&5
-+ echo "$as_me:14757: \$? = $ac_status" >&5
++ echo "$as_me:14758: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-@@ -14831,11 +14854,11 @@
+@@ -14832,11 +14855,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14834: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:14857: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:14858: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:14838: \$? = $ac_status" >&5
-+ echo "$as_me:14861: \$? = $ac_status" >&5
++ echo "$as_me:14862: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
-@@ -14903,6 +14926,9 @@
+@@ -14904,6 +14927,9 @@
cygwin* | mingw*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
;;
@@ -331,7 +340,7 @@
*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
-@@ -15349,6 +15375,18 @@
+@@ -15350,6 +15376,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -350,35 +359,35 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -16414,11 +16452,11 @@
+@@ -16415,11 +16453,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16417: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:16455: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:16456: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16421: \$? = $ac_status" >&5
-+ echo "$as_me:16459: \$? = $ac_status" >&5
++ echo "$as_me:16460: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-@@ -16518,11 +16556,11 @@
+@@ -16519,11 +16557,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16521: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:16559: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:16560: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:16525: \$? = $ac_status" >&5
-+ echo "$as_me:16563: \$? = $ac_status" >&5
++ echo "$as_me:16564: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
-@@ -16783,12 +16821,13 @@
+@@ -16784,12 +16822,13 @@
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
@@ -393,7 +402,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
-@@ -17311,7 +17350,7 @@
+@@ -17312,7 +17351,7 @@
link_all_deplibs_F77=yes
;;
@@ -402,7 +411,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -17970,6 +18009,18 @@
+@@ -17971,6 +18010,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -421,49 +430,49 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -18725,11 +18776,11 @@
+@@ -18726,11 +18777,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:18728: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:18779: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:18780: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:18732: \$? = $ac_status" >&5
-+ echo "$as_me:18783: \$? = $ac_status" >&5
++ echo "$as_me:18784: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-@@ -19015,11 +19066,11 @@
+@@ -19016,11 +19067,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19018: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:19069: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:19070: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:19022: \$? = $ac_status" >&5
-+ echo "$as_me:19073: \$? = $ac_status" >&5
++ echo "$as_me:19074: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-@@ -19119,11 +19170,11 @@
+@@ -19120,11 +19171,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:19122: $lt_compile\"" >&5)
-+ (eval echo "\"\$as_me:19173: $lt_compile\"" >&5)
++ (eval echo "\"\$as_me:19174: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:19126: \$? = $ac_status" >&5
-+ echo "$as_me:19177: \$? = $ac_status" >&5
++ echo "$as_me:19178: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
-@@ -19384,12 +19435,13 @@
+@@ -19385,12 +19436,13 @@
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
@@ -478,7 +487,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
-@@ -19932,7 +19984,7 @@
+@@ -19933,7 +19985,7 @@
link_all_deplibs_GCJ=yes
;;
@@ -487,7 +496,7 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-@@ -20591,6 +20643,18 @@
+@@ -20592,6 +20644,18 @@
dynamic_linker='GNU/Linux ld.so'
;;
@@ -506,7 +515,7 @@
netbsd*)
version_type=sunos
need_lib_prefix=no
-@@ -24593,10 +24657,11 @@
+@@ -24594,10 +24658,11 @@
{ echo "$as_me:$LINENO: checking for BASE_DEPENDENCIES" >&5
echo $ECHO_N "checking for BASE_DEPENDENCIES... $ECHO_C" >&6; }
@@ -522,7 +531,7 @@
{ (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED_VERSION\"") >&5
($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED_VERSION") 2>&5
ac_status=$?
-@@ -24606,13 +24671,15 @@
+@@ -24607,13 +24672,15 @@
else
pkg_failed=yes
fi
@@ -544,7 +553,7 @@
{ (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED_VERSION\"") >&5
($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED_VERSION") 2>&5
ac_status=$?
-@@ -24622,8 +24689,9 @@
+@@ -24623,8 +24690,9 @@
else
pkg_failed=yes
fi
@@ -556,7 +565,7 @@
fi
-@@ -24636,9 +24704,9 @@
+@@ -24637,9 +24705,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
@@ -568,7 +577,7 @@
fi
# Put the nasty error message in config.log where it belongs
echo "$BASE_DEPENDENCIES_PKG_ERRORS" >&5
-@@ -38554,6 +38622,11 @@
+@@ -38555,6 +38623,11 @@
LIBC="libc.so.12"
INTL="libintl.so.0"
;;
@@ -580,9 +589,87 @@
*-*-*freebsd*)
LIBC="libc.so"
INTL="libintl.so"
+@@ -39082,11 +39155,20 @@
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+
+-if test ${TARGET} = ARM && test x$cross_compiling = xno && test x$enable_mcs_build != xno; then
++
++# Check whether --with-fpu was given.
++if test "${with_fpu+set}" = set; then
++ withval=$with_fpu; fpu=$withval
++fi
++
++
++if test ${TARGET} = ARM; then
+ { echo "$as_me:$LINENO: checking which FPU to use" >&5
+ echo $ECHO_N "checking which FPU to use... $ECHO_C" >&6; }
+
+- cat >conftest.$ac_ext <<_ACEOF
++ if test "x$fpu" = "x"; then
++
++ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+@@ -39125,10 +39207,54 @@
+ echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+
++
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ __asm__ ("fldd d0, [r0]");
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
++ (eval "$ac_compile") 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest.$ac_objext; then
++ fpu=VFP
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fpu=NONE
+ fi
+
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++
++fi
++
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+
+ { echo "$as_me:$LINENO: result: $fpu" >&5
diff -urNad mono-2.0.1~/libgc/aclocal.m4 mono-2.0.1/libgc/aclocal.m4
---- mono-2.0.1~/libgc/aclocal.m4 2008-11-11 23:28:32.000000000 +0100
-+++ mono-2.0.1/libgc/aclocal.m4 2008-11-11 23:28:57.000000000 +0100
+--- mono-2.0.1~/libgc/aclocal.m4 2008-10-22 19:20:04.000000000 +0200
++++ mono-2.0.1/libgc/aclocal.m4 2008-11-23 16:09:50.000000000 +0100
@@ -21,7 +21,7 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
@@ -672,55957 +759,9 @@
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-diff -urNad mono-2.0.1~/libgc/autom4te.cache/output.0 mono-2.0.1/libgc/autom4te.cache/output.0
---- mono-2.0.1~/libgc/autom4te.cache/output.0 1970-01-01 01:00:00.000000000 +0100
-+++ mono-2.0.1/libgc/autom4te.cache/output.0 2008-11-11 23:29:24.000000000 +0100
-@@ -0,0 +1,22660 @@
-+@%:@! /bin/sh
-+@%:@ Guess values for system-dependent variables and create Makefiles.
-+@%:@ Generated by GNU Autoconf 2.61 for libgc-mono 6.6.
-+@%:@
-+@%:@ Report bugs to <Hans_Boehm at hp.com>.
-+@%:@
-+@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+@%:@ 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+@%:@ This configure script is free software; the Free Software Foundation
-+@%:@ gives unlimited permission to copy, distribute and modify it.
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+if test "x$CONFIG_SHELL" = x; then
-+ if (eval ":") 2>/dev/null; then
-+ as_have_required=yes
-+else
-+ as_have_required=no
-+fi
-+
-+ if test $as_have_required = yes && (eval ":
-+(as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+ as_lineno_1=\$LINENO
-+ as_lineno_2=\$LINENO
-+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-+") 2> /dev/null; then
-+ :
-+else
-+ as_candidate_shells=
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ case $as_dir in
-+ /*)
-+ for as_base in sh bash ksh sh5; do
-+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-+ done;;
-+ esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+ for as_shell in $as_candidate_shells $SHELL; do
-+ # Try only shells that exist, to save several forks.
-+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+ { ("$as_shell") 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+_ASEOF
-+}; then
-+ CONFIG_SHELL=$as_shell
-+ as_have_required=yes
-+ if { "$as_shell" 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+(as_func_return () {
-+ (exit $1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = "$1" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test $exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-+
-+_ASEOF
-+}; then
-+ break
-+fi
-+
-+fi
-+
-+ done
-+
-+ if test "x$CONFIG_SHELL" != x; then
-+ for as_var in BASH_ENV ENV
-+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ done
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+fi
-+
-+
-+ if test $as_have_required = no; then
-+ echo This script requires a shell more modern than all the
-+ echo shells that I found on your system. Please install a
-+ echo modern shell, or manually run the script under such a
-+ echo shell if you do have one.
-+ { (exit 1); exit 1; }
-+fi
-+
-+
-+fi
-+
-+fi
-+
-+
-+
-+(eval "as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0") || {
-+ echo No shell found that supports shell functions.
-+ echo Please tell autoconf at gnu.org about your system,
-+ echo including any error possibly output before this
-+ echo message
-+}
-+
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
-+ sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
-+ N
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-+ t loop
-+ s/-\n.*//
-+ ' >$as_me.lineno &&
-+ chmod +x "$as_me.lineno" ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+ as_ln_s='cp -p'
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ test -d ./-p && rmdir ./-p
-+ as_mkdir_p=false
-+fi
-+
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+
-+
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+ # Remove one level of quotation (which was required for Make).
-+ ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-+ ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X$1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+elif test "X$1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+ # Yippee, $echo works!
-+ :
-+else
-+ # Restart under the correct shell.
-+ exec $SHELL "$0" --no-reexec ${1+"$@"}
-+fi
-+
-+if test "X$1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+$*
-+EOF
-+ exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-+ echo_test_string=`eval $cmd` &&
-+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+ then
-+ break
-+ fi
-+ done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ :
-+else
-+ # The Solaris, AIX, and Digital Unix default echo programs unquote
-+ # backslashes. This makes it impossible to quote backslashes using
-+ # echo "$something" | sed 's/\\/\\\\/g'
-+ #
-+ # So, first we look for a working echo in the user's PATH.
-+
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for dir in $PATH /usr/ucb; do
-+ IFS="$lt_save_ifs"
-+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$dir/echo"
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ if test "X$echo" = Xecho; then
-+ # We didn't find a better echo, so look for alternatives.
-+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # This shell has a builtin print -r that does the trick.
-+ echo='print -r'
-+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+ test "X$CONFIG_SHELL" != X/bin/ksh; then
-+ # If we have ksh, try running configure again with it.
-+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+ export ORIGINAL_CONFIG_SHELL
-+ CONFIG_SHELL=/bin/ksh
-+ export CONFIG_SHELL
-+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-+ else
-+ # Try using printf.
-+ echo='printf %s\n'
-+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # Cool, printf works
-+ :
-+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+ export CONFIG_SHELL
-+ SHELL="$CONFIG_SHELL"
-+ export SHELL
-+ echo="$CONFIG_SHELL $0 --fallback-echo"
-+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$CONFIG_SHELL $0 --fallback-echo"
-+ else
-+ # maybe with a smaller string...
-+ prev=:
-+
-+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+ then
-+ break
-+ fi
-+ prev="$cmd"
-+ done
-+
-+ if test "$prev" != 'sed 50q "$0"'; then
-+ echo_test_string=`eval $prev`
-+ export echo_test_string
-+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-+ else
-+ # Oops. We lost completely, so just stick with echo.
-+ echo=echo
-+ fi
-+ fi
-+ fi
-+ fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-+ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-+fi
-+
-+
-+
-+
-+tagnames=${tagnames+${tagnames},}CXX
-+
-+tagnames=${tagnames+${tagnames},}F77
-+
-+exec 7<&0 </dev/null 6>&1
-+
-+# Name of the host.
-+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# so uname gets run too.
-+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-+
-+#
-+# Initializations.
-+#
-+ac_default_prefix=/usr/local
-+ac_clean_files=
-+ac_config_libobj_dir=.
-+LIB@&t at OBJS=
-+cross_compiling=no
-+subdirs=
-+MFLAGS=
-+MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+# Identity of this package.
-+PACKAGE_NAME='libgc-mono'
-+PACKAGE_TARNAME='libgc-mono'
-+PACKAGE_VERSION='6.6'
-+PACKAGE_STRING='libgc-mono 6.6'
-+PACKAGE_BUGREPORT='Hans_Boehm at hp.com'
-+
-+ac_unique_file="gcj_mlc.c"
-+# Factoring default headers for most tests.
-+ac_includes_default="\
-+#include <stdio.h>
-+#ifdef HAVE_SYS_TYPES_H
-+# include <sys/types.h>
-+#endif
-+#ifdef HAVE_SYS_STAT_H
-+# include <sys/stat.h>
-+#endif
-+#ifdef STDC_HEADERS
-+# include <stdlib.h>
-+# include <stddef.h>
-+#else
-+# ifdef HAVE_STDLIB_H
-+# include <stdlib.h>
-+# endif
-+#endif
-+#ifdef HAVE_STRING_H
-+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-+# include <memory.h>
-+# endif
-+# include <string.h>
-+#endif
-+#ifdef HAVE_STRINGS_H
-+# include <strings.h>
-+#endif
-+#ifdef HAVE_INTTYPES_H
-+# include <inttypes.h>
-+#endif
-+#ifdef HAVE_STDINT_H
-+# include <stdint.h>
-+#endif
-+#ifdef HAVE_UNISTD_H
-+# include <unistd.h>
-+#endif"
-+
-+ac_subst_vars='SHELL
-+PATH_SEPARATOR
-+PACKAGE_NAME
-+PACKAGE_TARNAME
-+PACKAGE_VERSION
-+PACKAGE_STRING
-+PACKAGE_BUGREPORT
-+exec_prefix
-+prefix
-+program_transform_name
-+bindir
-+sbindir
-+libexecdir
-+datarootdir
-+datadir
-+sysconfdir
-+sharedstatedir
-+localstatedir
-+includedir
-+oldincludedir
-+docdir
-+infodir
-+htmldir
-+dvidir
-+pdfdir
-+psdir
-+libdir
-+localedir
-+mandir
-+DEFS
-+ECHO_C
-+ECHO_N
-+ECHO_T
-+LIBS
-+build_alias
-+host_alias
-+target_alias
-+INSTALL_PROGRAM
-+INSTALL_SCRIPT
-+INSTALL_DATA
-+am__isrc
-+CYGPATH_W
-+PACKAGE
-+VERSION
-+ACLOCAL
-+AUTOCONF
-+AUTOMAKE
-+AUTOHEADER
-+MAKEINFO
-+install_sh
-+STRIP
-+INSTALL_STRIP_PROGRAM
-+mkdir_p
-+AWK
-+SET_MAKE
-+am__leading_dot
-+AMTAR
-+am__tar
-+am__untar
-+build
-+build_cpu
-+build_vendor
-+build_os
-+host
-+host_cpu
-+host_vendor
-+host_os
-+GC_VERSION
-+CC
-+CFLAGS
-+LDFLAGS
-+CPPFLAGS
-+ac_ct_CC
-+EXEEXT
-+OBJEXT
-+DEPDIR
-+am__include
-+am__quote
-+AMDEP_TRUE
-+AMDEP_FALSE
-+AMDEPBACKSLASH
-+CCDEPMODE
-+am__fastdepCC_TRUE
-+am__fastdepCC_FALSE
-+CXX
-+CXXFLAGS
-+ac_ct_CXX
-+CXXDEPMODE
-+am__fastdepCXX_TRUE
-+am__fastdepCXX_FALSE
-+CCAS
-+CCASFLAGS
-+CCASDEPMODE
-+am__fastdepCCAS_TRUE
-+am__fastdepCCAS_FALSE
-+AR
-+RANLIB
-+MAINTAINER_MODE_TRUE
-+MAINTAINER_MODE_FALSE
-+MAINT
-+GC_CFLAGS
-+THREADDLLIBS
-+POWERPC_DARWIN_TRUE
-+POWERPC_DARWIN_FALSE
-+COMPILER_XLC_TRUE
-+COMPILER_XLC_FALSE
-+EXTRA_TEST_LIBS
-+target_all
-+CPLUSPLUS_TRUE
-+CPLUSPLUS_FALSE
-+INCLUDES
-+CXXINCLUDES
-+addobjs
-+addincludes
-+addlibs
-+addtests
-+SED
-+GREP
-+EGREP
-+LN_S
-+ECHO
-+DSYMUTIL
-+NMEDIT
-+CPP
-+CXXCPP
-+F77
-+FFLAGS
-+ac_ct_F77
-+LIBTOOL
-+MY_CFLAGS
-+UNWINDLIBS
-+USE_LIBDIR_TRUE
-+USE_LIBDIR_FALSE
-+LIB@&t at OBJS
-+LTLIBOBJS'
-+ac_subst_files=''
-+ ac_precious_vars='build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+LIBS
-+CPPFLAGS
-+CXX
-+CXXFLAGS
-+CCC
-+CCAS
-+CCASFLAGS
-+CPP
-+CXXCPP
-+F77
-+FFLAGS'
-+
-+
-+# Initialize some variables set by options.
-+ac_init_help=
-+ac_init_version=false
-+# The variables have the same names as the options, with
-+# dashes changed to underlines.
-+cache_file=/dev/null
-+exec_prefix=NONE
-+no_create=
-+no_recursion=
-+prefix=NONE
-+program_prefix=NONE
-+program_suffix=NONE
-+program_transform_name=s,x,x,
-+silent=
-+site=
-+srcdir=
-+verbose=
-+x_includes=NONE
-+x_libraries=NONE
-+
-+# Installation directory options.
-+# These are left unexpanded so users can "make install exec_prefix=/foo"
-+# and all the variables that are supposed to be based on exec_prefix
-+# by default will actually change.
-+# Use braces instead of parens because sh, perl, etc. also accept them.
-+# (The list follows the same order as the GNU Coding Standards.)
-+bindir='${exec_prefix}/bin'
-+sbindir='${exec_prefix}/sbin'
-+libexecdir='${exec_prefix}/libexec'
-+datarootdir='${prefix}/share'
-+datadir='${datarootdir}'
-+sysconfdir='${prefix}/etc'
-+sharedstatedir='${prefix}/com'
-+localstatedir='${prefix}/var'
-+includedir='${prefix}/include'
-+oldincludedir='/usr/include'
-+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-+infodir='${datarootdir}/info'
-+htmldir='${docdir}'
-+dvidir='${docdir}'
-+pdfdir='${docdir}'
-+psdir='${docdir}'
-+libdir='${exec_prefix}/lib'
-+localedir='${datarootdir}/locale'
-+mandir='${datarootdir}/man'
-+
-+ac_prev=
-+ac_dashdash=
-+for ac_option
-+do
-+ # If the previous option needs an argument, assign it.
-+ if test -n "$ac_prev"; then
-+ eval $ac_prev=\$ac_option
-+ ac_prev=
-+ continue
-+ fi
-+
-+ case $ac_option in
-+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-+ *) ac_optarg=yes ;;
-+ esac
-+
-+ # Accept the important Cygnus configure options, so we can diagnose typos.
-+
-+ case $ac_dashdash$ac_option in
-+ --)
-+ ac_dashdash=yes ;;
-+
-+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
-+ ac_prev=bindir ;;
-+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-+ bindir=$ac_optarg ;;
-+
-+ -build | --build | --buil | --bui | --bu)
-+ ac_prev=build_alias ;;
-+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-+ build_alias=$ac_optarg ;;
-+
-+ -cache-file | --cache-file | --cache-fil | --cache-fi \
-+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-+ ac_prev=cache_file ;;
-+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-+ cache_file=$ac_optarg ;;
-+
-+ --config-cache | -C)
-+ cache_file=config.cache ;;
-+
-+ -datadir | --datadir | --datadi | --datad)
-+ ac_prev=datadir ;;
-+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
-+ datadir=$ac_optarg ;;
-+
-+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-+ | --dataroo | --dataro | --datar)
-+ ac_prev=datarootdir ;;
-+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-+ datarootdir=$ac_optarg ;;
-+
-+ -disable-* | --disable-*)
-+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=no ;;
-+
-+ -docdir | --docdir | --docdi | --doc | --do)
-+ ac_prev=docdir ;;
-+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-+ docdir=$ac_optarg ;;
-+
-+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-+ ac_prev=dvidir ;;
-+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-+ dvidir=$ac_optarg ;;
-+
-+ -enable-* | --enable-*)
-+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=\$ac_optarg ;;
-+
-+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-+ | --exec | --exe | --ex)
-+ ac_prev=exec_prefix ;;
-+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-+ | --exec=* | --exe=* | --ex=*)
-+ exec_prefix=$ac_optarg ;;
-+
-+ -gas | --gas | --ga | --g)
-+ # Obsolete; use --with-gas.
-+ with_gas=yes ;;
-+
-+ -help | --help | --hel | --he | -h)
-+ ac_init_help=long ;;
-+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-+ ac_init_help=recursive ;;
-+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-+ ac_init_help=short ;;
-+
-+ -host | --host | --hos | --ho)
-+ ac_prev=host_alias ;;
-+ -host=* | --host=* | --hos=* | --ho=*)
-+ host_alias=$ac_optarg ;;
-+
-+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-+ ac_prev=htmldir ;;
-+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-+ | --ht=*)
-+ htmldir=$ac_optarg ;;
-+
-+ -includedir | --includedir | --includedi | --included | --include \
-+ | --includ | --inclu | --incl | --inc)
-+ ac_prev=includedir ;;
-+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-+ | --includ=* | --inclu=* | --incl=* | --inc=*)
-+ includedir=$ac_optarg ;;
-+
-+ -infodir | --infodir | --infodi | --infod | --info | --inf)
-+ ac_prev=infodir ;;
-+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-+ infodir=$ac_optarg ;;
-+
-+ -libdir | --libdir | --libdi | --libd)
-+ ac_prev=libdir ;;
-+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
-+ libdir=$ac_optarg ;;
-+
-+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-+ | --libexe | --libex | --libe)
-+ ac_prev=libexecdir ;;
-+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-+ | --libexe=* | --libex=* | --libe=*)
-+ libexecdir=$ac_optarg ;;
-+
-+ -localedir | --localedir | --localedi | --localed | --locale)
-+ ac_prev=localedir ;;
-+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-+ localedir=$ac_optarg ;;
-+
-+ -localstatedir | --localstatedir | --localstatedi | --localstated \
-+ | --localstate | --localstat | --localsta | --localst | --locals)
-+ ac_prev=localstatedir ;;
-+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-+ localstatedir=$ac_optarg ;;
-+
-+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-+ ac_prev=mandir ;;
-+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-+ mandir=$ac_optarg ;;
-+
-+ -nfp | --nfp | --nf)
-+ # Obsolete; use --without-fp.
-+ with_fp=no ;;
-+
-+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-+ | --no-cr | --no-c | -n)
-+ no_create=yes ;;
-+
-+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-+ no_recursion=yes ;;
-+
-+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-+ | --oldin | --oldi | --old | --ol | --o)
-+ ac_prev=oldincludedir ;;
-+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-+ oldincludedir=$ac_optarg ;;
-+
-+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-+ ac_prev=prefix ;;
-+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-+ prefix=$ac_optarg ;;
-+
-+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
-+ | --program-pre | --program-pr | --program-p)
-+ ac_prev=program_prefix ;;
-+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
-+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-+ program_prefix=$ac_optarg ;;
-+
-+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
-+ | --program-suf | --program-su | --program-s)
-+ ac_prev=program_suffix ;;
-+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
-+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-+ program_suffix=$ac_optarg ;;
-+
-+ -program-transform-name | --program-transform-name \
-+ | --program-transform-nam | --program-transform-na \
-+ | --program-transform-n | --program-transform- \
-+ | --program-transform | --program-transfor \
-+ | --program-transfo | --program-transf \
-+ | --program-trans | --program-tran \
-+ | --progr-tra | --program-tr | --program-t)
-+ ac_prev=program_transform_name ;;
-+ -program-transform-name=* | --program-transform-name=* \
-+ | --program-transform-nam=* | --program-transform-na=* \
-+ | --program-transform-n=* | --program-transform-=* \
-+ | --program-transform=* | --program-transfor=* \
-+ | --program-transfo=* | --program-transf=* \
-+ | --program-trans=* | --program-tran=* \
-+ | --progr-tra=* | --program-tr=* | --program-t=*)
-+ program_transform_name=$ac_optarg ;;
-+
-+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-+ ac_prev=pdfdir ;;
-+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-+ pdfdir=$ac_optarg ;;
-+
-+ -psdir | --psdir | --psdi | --psd | --ps)
-+ ac_prev=psdir ;;
-+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-+ psdir=$ac_optarg ;;
-+
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil)
-+ silent=yes ;;
-+
-+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-+ ac_prev=sbindir ;;
-+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-+ | --sbi=* | --sb=*)
-+ sbindir=$ac_optarg ;;
-+
-+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
-+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-+ | --sharedst | --shareds | --shared | --share | --shar \
-+ | --sha | --sh)
-+ ac_prev=sharedstatedir ;;
-+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-+ | --sha=* | --sh=*)
-+ sharedstatedir=$ac_optarg ;;
-+
-+ -site | --site | --sit)
-+ ac_prev=site ;;
-+ -site=* | --site=* | --sit=*)
-+ site=$ac_optarg ;;
-+
-+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-+ ac_prev=srcdir ;;
-+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-+ srcdir=$ac_optarg ;;
-+
-+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-+ | --syscon | --sysco | --sysc | --sys | --sy)
-+ ac_prev=sysconfdir ;;
-+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-+ sysconfdir=$ac_optarg ;;
-+
-+ -target | --target | --targe | --targ | --tar | --ta | --t)
-+ ac_prev=target_alias ;;
-+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-+ target_alias=$ac_optarg ;;
-+
-+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
-+ verbose=yes ;;
-+
-+ -version | --version | --versio | --versi | --vers | -V)
-+ ac_init_version=: ;;
-+
-+ -with-* | --with-*)
-+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=\$ac_optarg ;;
-+
-+ -without-* | --without-*)
-+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=no ;;
-+
-+ --x)
-+ # Obsolete; use --with-x.
-+ with_x=yes ;;
-+
-+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-+ | --x-incl | --x-inc | --x-in | --x-i)
-+ ac_prev=x_includes ;;
-+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-+ x_includes=$ac_optarg ;;
-+
-+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
-+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-+ ac_prev=x_libraries ;;
-+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-+ x_libraries=$ac_optarg ;;
-+
-+ -*) { echo "$as_me: error: unrecognized option: $ac_option
-+Try \`$0 --help' for more information." >&2
-+ { (exit 1); exit 1; }; }
-+ ;;
-+
-+ *=*)
-+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+ { (exit 1); exit 1; }; }
-+ eval $ac_envvar=\$ac_optarg
-+ export $ac_envvar ;;
-+
-+ *)
-+ # FIXME: should be removed in autoconf 3.0.
-+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-+ ;;
-+
-+ esac
-+done
-+
-+if test -n "$ac_prev"; then
-+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-+ { echo "$as_me: error: missing argument to $ac_option" >&2
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+# Be sure to have absolute directory names.
-+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
-+ datadir sysconfdir sharedstatedir localstatedir includedir \
-+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-+ libdir localedir mandir
-+do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* ) continue;;
-+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-+ esac
-+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; }
-+done
-+
-+# There might be people who depend on the old broken behavior: `$host'
-+# used to hold the argument of --host etc.
-+# FIXME: To remove some day.
-+build=$build_alias
-+host=$host_alias
-+target=$target_alias
-+
-+# FIXME: To remove some day.
-+if test "x$host_alias" != x; then
-+ if test "x$build_alias" = x; then
-+ cross_compiling=maybe
-+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+ If a cross compiler is detected then cross compile mode will be used." >&2
-+ elif test "x$build_alias" != "x$host_alias"; then
-+ cross_compiling=yes
-+ fi
-+fi
-+
-+ac_tool_prefix=
-+test -n "$host_alias" && ac_tool_prefix=$host_alias-
-+
-+test "$silent" = yes && exec 6>/dev/null
-+
-+
-+ac_pwd=`pwd` && test -n "$ac_pwd" &&
-+ac_ls_di=`ls -di .` &&
-+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-+ { echo "$as_me: error: Working directory cannot be determined" >&2
-+ { (exit 1); exit 1; }; }
-+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-+ { echo "$as_me: error: pwd does not report name of working directory" >&2
-+ { (exit 1); exit 1; }; }
-+
-+
-+# Find the source files, if location was not specified.
-+if test -z "$srcdir"; then
-+ ac_srcdir_defaulted=yes
-+ # Try the directory containing this script, then the parent directory.
-+ ac_confdir=`$as_dirname -- "$0" ||
-+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$0" : 'X\(//\)[^/]' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$0" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ srcdir=$ac_confdir
-+ if test ! -r "$srcdir/$ac_unique_file"; then
-+ srcdir=..
-+ fi
-+else
-+ ac_srcdir_defaulted=no
-+fi
-+if test ! -r "$srcdir/$ac_unique_file"; then
-+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { (exit 1); exit 1; }; }
-+fi
-+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-+ac_abs_confdir=`(
-+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-+ { (exit 1); exit 1; }; }
-+ pwd)`
-+# When building in place, set srcdir=.
-+if test "$ac_abs_confdir" = "$ac_pwd"; then
-+ srcdir=.
-+fi
-+# Remove unnecessary trailing slashes from srcdir.
-+# Double slashes in file names in object file debugging info
-+# mess up M-x gdb in Emacs.
-+case $srcdir in
-+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-+esac
-+for ac_var in $ac_precious_vars; do
-+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_env_${ac_var}_value=\$${ac_var}
-+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
-+done
-+
-+#
-+# Report the --help message.
-+#
-+if test "$ac_init_help" = "long"; then
-+ # Omit some internal or obsolete options to make the list less imposing.
-+ # This message is too long to be a string in the A/UX 3.1 sh.
-+ cat <<_ACEOF
-+\`configure' configures libgc-mono 6.6 to adapt to many kinds of systems.
-+
-+Usage: $0 [OPTION]... [VAR=VALUE]...
-+
-+To assign environment variables (e.g., CC, CFLAGS...), specify them as
-+VAR=VALUE. See below for descriptions of some of the useful variables.
-+
-+Defaults for the options are specified in brackets.
-+
-+Configuration:
-+ -h, --help display this help and exit
-+ --help=short display options specific to this package
-+ --help=recursive display the short help of all the included packages
-+ -V, --version display version information and exit
-+ -q, --quiet, --silent do not print \`checking...' messages
-+ --cache-file=FILE cache test results in FILE [disabled]
-+ -C, --config-cache alias for \`--cache-file=config.cache'
-+ -n, --no-create do not create output files
-+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
-+
-+Installation directories:
-+ --prefix=PREFIX install architecture-independent files in PREFIX
-+ [$ac_default_prefix]
-+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-+ [PREFIX]
-+
-+By default, \`make install' will install all the files in
-+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-+for instance \`--prefix=\$HOME'.
-+
-+For better control, use the options below.
-+
-+Fine tuning of the installation directories:
-+ --bindir=DIR user executables [EPREFIX/bin]
-+ --sbindir=DIR system admin executables [EPREFIX/sbin]
-+ --libexecdir=DIR program executables [EPREFIX/libexec]
-+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-+ --libdir=DIR object code libraries [EPREFIX/lib]
-+ --includedir=DIR C header files [PREFIX/include]
-+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
-+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
-+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
-+ --infodir=DIR info documentation [DATAROOTDIR/info]
-+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
-+ --mandir=DIR man documentation [DATAROOTDIR/man]
-+ --docdir=DIR documentation root @<:@DATAROOTDIR/doc/libgc-mono@:>@
-+ --htmldir=DIR html documentation [DOCDIR]
-+ --dvidir=DIR dvi documentation [DOCDIR]
-+ --pdfdir=DIR pdf documentation [DOCDIR]
-+ --psdir=DIR ps documentation [DOCDIR]
-+_ACEOF
-+
-+ cat <<\_ACEOF
-+
-+Program names:
-+ --program-prefix=PREFIX prepend PREFIX to installed program names
-+ --program-suffix=SUFFIX append SUFFIX to installed program names
-+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-+
-+System types:
-+ --build=BUILD configure for building on BUILD [guessed]
-+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
-+_ACEOF
-+fi
-+
-+if test -n "$ac_init_help"; then
-+ case $ac_init_help in
-+ short | recursive ) echo "Configuration of libgc-mono 6.6:";;
-+ esac
-+ cat <<\_ACEOF
-+
-+Optional Features:
-+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-+ --disable-dependency-tracking speeds up one-time build
-+ --enable-dependency-tracking do not reject slow dependency extractors
-+ --enable-maintainer-mode enable make rules and dependencies not useful
-+ (and sometimes confusing) to the casual installer
-+ --enable-win32-dllmain Define the DllMain function in win32_threads.c even if the collector is not built as a dll
-+ --enable-parallel-mark parallelize marking and free list construction
-+ --enable-cplusplus install C++ support
-+ --enable-shared@<:@=PKGS@:>@ build shared libraries @<:@default=yes@:>@
-+ --enable-static@<:@=PKGS@:>@ build static libraries @<:@default=yes@:>@
-+ --enable-fast-install@<:@=PKGS@:>@
-+ optimize for fast installation @<:@default=yes@:>@
-+ --disable-libtool-lock avoid locking (might break parallel builds)
-+ --enable-full-debug include full support for pointer backtracing etc.
-+ --enable-redirect-malloc redirect malloc and friends to GC routines
-+ --enable-gc-assertions collector-internal assertion checking
-+
-+Optional Packages:
-+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-+ --with-ecos enable runtime eCos target support
-+ --with-gnu-ld assume the C compiler uses GNU ld @<:@default=no@:>@
-+ --with-pic try to use only PIC/non-PIC objects @<:@default=use
-+ both@:>@
-+ --with-tags@<:@=TAGS@:>@ include additional configurations @<:@automatic@:>@
-+ --with-target-subdir=SUBDIR
-+ configuring with a cross compiler
-+ --with-cross-host=HOST configuring with a cross compiler
-+
-+Some influential environment variables:
-+ CC C compiler command
-+ CFLAGS C compiler flags
-+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
-+ nonstandard directory <lib dir>
-+ LIBS libraries to pass to the linker, e.g. -l<library>
-+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-+ you have headers in a nonstandard directory <include dir>
-+ CXX C++ compiler command
-+ CXXFLAGS C++ compiler flags
-+ CCAS assembler compiler command (defaults to CC)
-+ CCASFLAGS assembler compiler flags (defaults to CFLAGS)
-+ CPP C preprocessor
-+ CXXCPP C++ preprocessor
-+ F77 Fortran 77 compiler command
-+ FFLAGS Fortran 77 compiler flags
-+
-+Use these variables to override the choices made by `configure' or to help
-+it to find libraries and programs with nonstandard names/locations.
-+
-+Report bugs to <Hans_Boehm at hp.com>.
-+_ACEOF
-+ac_status=$?
-+fi
-+
-+if test "$ac_init_help" = "recursive"; then
-+ # If there are subdirs, report their specific --help.
-+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-+ test -d "$ac_dir" || continue
-+ ac_builddir=.
-+
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-+
-+case $srcdir in
-+ .) # We are building in place.
-+ ac_srcdir=.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+ cd "$ac_dir" || { ac_status=$?; continue; }
-+ # Check for guested configure.
-+ if test -f "$ac_srcdir/configure.gnu"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-+ elif test -f "$ac_srcdir/configure"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure" --help=recursive
-+ else
-+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+ fi || ac_status=$?
-+ cd "$ac_pwd" || { ac_status=$?; break; }
-+ done
-+fi
-+
-+test -n "$ac_init_help" && exit $ac_status
-+if $ac_init_version; then
-+ cat <<\_ACEOF
-+libgc-mono configure 6.6
-+generated by GNU Autoconf 2.61
-+
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+ exit
-+fi
-+cat >config.log <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+
-+It was created by libgc-mono $as_me 6.6, which was
-+generated by GNU Autoconf 2.61. Invocation command line was
-+
-+ $ $0 $@
-+
-+_ACEOF
-+exec 5>>config.log
-+{
-+cat <<_ASUNAME
-+@%:@@%:@ --------- @%:@@%:@
-+@%:@@%:@ Platform. @%:@@%:@
-+@%:@@%:@ --------- @%:@@%:@
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-+
-+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-+
-+_ASUNAME
-+
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ echo "PATH: $as_dir"
-+done
-+IFS=$as_save_IFS
-+
-+} >&5
-+
-+cat >&5 <<_ACEOF
-+
-+
-+@%:@@%:@ ----------- @%:@@%:@
-+@%:@@%:@ Core tests. @%:@@%:@
-+@%:@@%:@ ----------- @%:@@%:@
-+
-+_ACEOF
-+
-+
-+# Keep a trace of the command line.
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Strip out --silent because we don't want to record it for future runs.
-+# Also quote any args containing shell meta-characters.
-+# Make two passes to allow for proper duplicate-argument suppression.
-+ac_configure_args=
-+ac_configure_args0=
-+ac_configure_args1=
-+ac_must_keep_next=false
-+for ac_pass in 1 2
-+do
-+ for ac_arg
-+ do
-+ case $ac_arg in
-+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil)
-+ continue ;;
-+ *\'*)
-+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ esac
-+ case $ac_pass in
-+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+ 2)
-+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+ if test $ac_must_keep_next = true; then
-+ ac_must_keep_next=false # Got value, back to normal.
-+ else
-+ case $ac_arg in
-+ *=* | --config-cache | -C | -disable-* | --disable-* \
-+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-+ | -with-* | --with-* | -without-* | --without-* | --x)
-+ case "$ac_configure_args0 " in
-+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-+ esac
-+ ;;
-+ -* ) ac_must_keep_next=true ;;
-+ esac
-+ fi
-+ ac_configure_args="$ac_configure_args '$ac_arg'"
-+ ;;
-+ esac
-+ done
-+done
-+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+
-+# When interrupted or exit'd, cleanup temporary files, and complete
-+# config.log. We remove comments because anyway the quotes in there
-+# would cause problems or look ugly.
-+# WARNING: Use '\'' to represent an apostrophe within the trap.
-+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-+trap 'exit_status=$?
-+ # Save into config.log some information that might help in debugging.
-+ {
-+ echo
-+
-+ cat <<\_ASBOX
-+@%:@@%:@ ---------------- @%:@@%:@
-+@%:@@%:@ Cache variables. @%:@@%:@
-+@%:@@%:@ ---------------- @%:@@%:@
-+_ASBOX
-+ echo
-+ # The following way of writing the cache mishandles newlines in values,
-+(
-+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
-+ (set) 2>&1 |
-+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
-+ sed -n \
-+ "s/'\''/'\''\\\\'\'''\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-+ ;; #(
-+ *)
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-+ ;;
-+ esac |
-+ sort
-+)
-+ echo
-+
-+ cat <<\_ASBOX
-+@%:@@%:@ ----------------- @%:@@%:@
-+@%:@@%:@ Output variables. @%:@@%:@
-+@%:@@%:@ ----------------- @%:@@%:@
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_vars
-+ do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
-+ done | sort
-+ echo
-+
-+ if test -n "$ac_subst_files"; then
-+ cat <<\_ASBOX
-+@%:@@%:@ ------------------- @%:@@%:@
-+@%:@@%:@ File substitutions. @%:@@%:@
-+@%:@@%:@ ------------------- @%:@@%:@
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_files
-+ do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
-+ done | sort
-+ echo
-+ fi
-+
-+ if test -s confdefs.h; then
-+ cat <<\_ASBOX
-+@%:@@%:@ ----------- @%:@@%:@
-+@%:@@%:@ confdefs.h. @%:@@%:@
-+@%:@@%:@ ----------- @%:@@%:@
-+_ASBOX
-+ echo
-+ cat confdefs.h
-+ echo
-+ fi
-+ test "$ac_signal" != 0 &&
-+ echo "$as_me: caught signal $ac_signal"
-+ echo "$as_me: exit $exit_status"
-+ } >&5
-+ rm -f core *.core core.conftest.* &&
-+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-+ exit $exit_status
-+' 0
-+for ac_signal in 1 2 13 15; do
-+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+done
-+ac_signal=0
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -f -r conftest* confdefs.h
-+
-+# Predefined preprocessor variables.
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_NAME "$PACKAGE_NAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_VERSION "$PACKAGE_VERSION"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_STRING "$PACKAGE_STRING"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-+_ACEOF
-+
-+
-+# Let the site file select an alternate cache file if it wants to.
-+# Prefer explicitly selected file to automatically selected ones.
-+if test -n "$CONFIG_SITE"; then
-+ set x "$CONFIG_SITE"
-+elif test "x$prefix" != xNONE; then
-+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
-+else
-+ set x "$ac_default_prefix/share/config.site" \
-+ "$ac_default_prefix/etc/config.site"
-+fi
-+shift
-+for ac_site_file
-+do
-+ if test -r "$ac_site_file"; then
-+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+echo "$as_me: loading site script $ac_site_file" >&6;}
-+ sed 's/^/| /' "$ac_site_file" >&5
-+ . "$ac_site_file"
-+ fi
-+done
-+
-+if test -r "$cache_file"; then
-+ # Some versions of bash will fail to source /dev/null (special
-+ # files actually), so we avoid doing that.
-+ if test -f "$cache_file"; then
-+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+echo "$as_me: loading cache $cache_file" >&6;}
-+ case $cache_file in
-+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
-+ *) . "./$cache_file";;
-+ esac
-+ fi
-+else
-+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+echo "$as_me: creating cache $cache_file" >&6;}
-+ >$cache_file
-+fi
-+
-+# Check that the precious variables saved in the cache have kept the same
-+# value.
-+ac_cache_corrupted=false
-+for ac_var in $ac_precious_vars; do
-+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
-+ eval ac_new_set=\$ac_env_${ac_var}_set
-+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
-+ eval ac_new_val=\$ac_env_${ac_var}_value
-+ case $ac_old_set,$ac_new_set in
-+ set,)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,set)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,);;
-+ *)
-+ if test "x$ac_old_val" != "x$ac_new_val"; then
-+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-+echo "$as_me: former value: $ac_old_val" >&2;}
-+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-+echo "$as_me: current value: $ac_new_val" >&2;}
-+ ac_cache_corrupted=:
-+ fi;;
-+ esac
-+ # Pass precious variables to config.status.
-+ if test "$ac_new_set" = set; then
-+ case $ac_new_val in
-+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *) ac_arg=$ac_var=$ac_new_val ;;
-+ esac
-+ case " $ac_configure_args " in
-+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
-+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+ esac
-+ fi
-+done
-+if $ac_cache_corrupted; then
-+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+am__api_version='1.10'
-+
-+ac_aux_dir=
-+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-+ if test -f "$ac_dir/install-sh"; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/install-sh -c"
-+ break
-+ elif test -f "$ac_dir/install.sh"; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/install.sh -c"
-+ break
-+ elif test -f "$ac_dir/shtool"; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/shtool install -c"
-+ break
-+ fi
-+done
-+if test -z "$ac_aux_dir"; then
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+# These three variables are undocumented and unsupported,
-+# and are intended to be withdrawn in a future Autoconf release.
-+# They can cause serious problems if a builder's source tree is in a directory
-+# whose full name contains unusual characters.
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-+
-+
-+# Find a good install program. We prefer a C program (faster),
-+# so one script is as good as another. But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
-+# ./install, which can be erroneously created by make from ./install.sh.
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+if test -z "$INSTALL"; then
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-+ if test $ac_prog = install &&
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # AIX install. It has an incompatible calling convention.
-+ :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
-+ else
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
-+ fi
-+ done
-+ done
-+ ;;
-+esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+ if test "${ac_cv_path_install+set}" = set; then
-+ INSTALL=$ac_cv_path_install
-+ else
-+ # As a last resort, use the slow shell script. Don't cache a
-+ # value for INSTALL within a source directory, because that will
-+ # break other packages using the cache if that directory is
-+ # removed, or if the value is a relative name.
-+ INSTALL=$ac_install_sh
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
-+# Just in case
-+sleep 1
-+echo timestamp > conftest.file
-+# Do `set' in a subshell so we don't clobber the current shell's
-+# arguments. Must try -L first in case configure is actually a
-+# symlink; some systems play weird games with the mod time of symlinks
-+# (eg FreeBSD returns the mod time of the symlink's containing
-+# directory).
-+if (
-+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-+ if test "$*" = "X"; then
-+ # -L didn't work.
-+ set X `ls -t $srcdir/configure conftest.file`
-+ fi
-+ rm -f conftest.file
-+ if test "$*" != "X $srcdir/configure conftest.file" \
-+ && test "$*" != "X conftest.file $srcdir/configure"; then
-+
-+ # If neither matched, then we have a broken ls. This can happen
-+ # if, for instance, CONFIG_SHELL is bash and it inherits a
-+ # broken ls alias from the environment. This has actually
-+ # happened. Such a system could not be considered "sane".
-+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&5
-+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+
-+ test "$2" = conftest.file
-+ )
-+then
-+ # Ok.
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-+Check your system clock" >&5
-+echo "$as_me: error: newly created file is older than distributed files!
-+Check your system clock" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+test "$program_prefix" != NONE &&
-+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
-+# Use a double $ so make ignores it.
-+test "$program_suffix" != NONE &&
-+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-+# Double any \ or $. echo might interpret backslashes.
-+# By default was `s,x,x', remove it if useless.
-+cat <<\_ACEOF >conftest.sed
-+s/[\\$]/&&/g;s/;s,x,x,$//
-+_ACEOF
-+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-+rm -f conftest.sed
-+
-+# expand $ac_aux_dir to an absolute path
-+am_aux_dir=`cd $ac_aux_dir && pwd`
-+
-+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-+# Use eval to expand $SHELL
-+if eval "$MISSING --run true"; then
-+ am_missing_run="$MISSING --run "
-+else
-+ am_missing_run=
-+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
-+if test -z "$MKDIR_P"; then
-+ if test "${ac_cv_path_mkdir+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in mkdir gmkdir; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
-+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-+ 'mkdir (GNU coreutils) '* | \
-+ 'mkdir (coreutils) '* | \
-+ 'mkdir (fileutils) '4.1*)
-+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
-+ break 3;;
-+ esac
-+ done
-+ done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+
-+ if test "${ac_cv_path_mkdir+set}" = set; then
-+ MKDIR_P="$ac_cv_path_mkdir -p"
-+ else
-+ # As a last resort, use the slow shell script. Don't cache a
-+ # value for MKDIR_P within a source directory, because that will
-+ # break other packages using the cache if that directory is
-+ # removed, or if the value is a relative name.
-+ test -d ./--version && rmdir ./--version
-+ MKDIR_P="$ac_install_sh -d"
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-+echo "${ECHO_T}$MKDIR_P" >&6; }
-+
-+mkdir_p="$MKDIR_P"
-+case $mkdir_p in
-+ [\\/$]* | ?:[\\/]*) ;;
-+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-+esac
-+
-+for ac_prog in gawk mawk nawk awk
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AWK+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$AWK"; then
-+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_AWK="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AWK=$ac_cv_prog_AWK
-+if test -n "$AWK"; then
-+ { echo "$as_me:$LINENO: result: $AWK" >&5
-+echo "${ECHO_T}$AWK" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$AWK" && break
-+done
-+
-+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.make <<\_ACEOF
-+SHELL = /bin/sh
-+all:
-+ @echo '@@@%%%=$(MAKE)=@@@%%%'
-+_ACEOF
-+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-+case `${MAKE-make} -f conftest.make 2>/dev/null` in
-+ *@@@%%%=?*=@@@%%%*)
-+ eval ac_cv_prog_make_${ac_make}_set=yes;;
-+ *)
-+ eval ac_cv_prog_make_${ac_make}_set=no;;
-+esac
-+rm -f conftest.make
-+fi
-+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+ SET_MAKE=
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+ SET_MAKE="MAKE=${MAKE-make}"
-+fi
-+
-+rm -rf .tst 2>/dev/null
-+mkdir .tst 2>/dev/null
-+if test -d .tst; then
-+ am__leading_dot=.
-+else
-+ am__leading_dot=_
-+fi
-+rmdir .tst 2>/dev/null
-+
-+if test "`cd $srcdir && pwd`" != "`pwd`"; then
-+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-+ # is not polluted with repeated "-I."
-+ am__isrc=' -I$(srcdir)'
-+ # test to see if srcdir already configured
-+ if test -f $srcdir/config.status; then
-+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+fi
-+
-+# test whether we have cygpath
-+if test -z "$CYGPATH_W"; then
-+ if (cygpath --version) >/dev/null 2>/dev/null; then
-+ CYGPATH_W='cygpath -w'
-+ else
-+ CYGPATH_W=echo
-+ fi
-+fi
-+
-+
-+# Define the identity of the package.
-+ PACKAGE=libgc-mono
-+ VERSION=6.6
-+
-+
-+# Some tools Automake needs.
-+
-+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-+
-+
-+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-+
-+
-+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-+
-+
-+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-+
-+
-+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-+
-+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-+
-+# Installed binaries are usually stripped using `strip' when the user
-+# run `make install-strip'. However `strip' might not be the right
-+# tool to use in cross-compilation environments, therefore Automake
-+# will honor the `STRIP' environment variable to overrule this program.
-+if test "$cross_compiling" != no; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$STRIP"; then
-+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+ { echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+ ac_ct_STRIP=$STRIP
-+ # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_STRIP"; then
-+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_STRIP="strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_STRIP" = x; then
-+ STRIP=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ STRIP=$ac_ct_STRIP
-+ fi
-+else
-+ STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+fi
-+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-+
-+# We need awk for the "check" target. The system "awk" is bad on
-+# some platforms.
-+# Always define AMTAR for backward compatibility.
-+
-+AMTAR=${AMTAR-"${am_missing_run}tar"}
-+
-+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-+
-+
-+
-+
-+
-+
-+
-+# Make sure we can run config.sub.
-+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+{ echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-+if test "${ac_cv_build+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_build_alias=$build_alias
-+test "x$ac_build_alias" = x &&
-+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-+test "x$ac_build_alias" = x &&
-+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-+ { (exit 1); exit 1; }; }
-+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6; }
-+case $ac_cv_build in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-+echo "$as_me: error: invalid value of canonical build" >&2;}
-+ { (exit 1); exit 1; }; };;
-+esac
-+build=$ac_cv_build
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_build
-+shift
-+build_cpu=$1
-+build_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+build_os=$*
-+IFS=$ac_save_IFS
-+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-+
-+
-+{ echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-+if test "${ac_cv_host+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "x$host_alias" = x; then
-+ ac_cv_host=$ac_cv_build
-+else
-+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6; }
-+case $ac_cv_host in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-+echo "$as_me: error: invalid value of canonical host" >&2;}
-+ { (exit 1); exit 1; }; };;
-+esac
-+host=$ac_cv_host
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_host
-+shift
-+host_cpu=$1
-+host_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+host_os=$*
-+IFS=$ac_save_IFS
-+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-+
-+
-+
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_CC="gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_CC="${ac_tool_prefix}cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ fi
-+fi
-+if test -z "$CC"; then
-+ # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+ ac_prog_rejected=no
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+ ac_prog_rejected=yes
-+ continue
-+ fi
-+ ac_cv_prog_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+if test $ac_prog_rejected = yes; then
-+ # We found a bogon in the path, so make sure we never use it.
-+ set dummy $ac_cv_prog_CC
-+ shift
-+ if test $@%:@ != 0; then
-+ # We chose a different compiler from the bogus one.
-+ # However, it has the same basename, so the bogon will be chosen
-+ # first if we set CC to just the basename; use the full file name.
-+ shift
-+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-+ fi
-+fi
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in cl.exe
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$CC" && break
-+ done
-+fi
-+if test -z "$CC"; then
-+ ac_ct_CC=$CC
-+ for ac_prog in cl.exe
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_CC="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$ac_ct_CC" && break
-+done
-+
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
-+fi
-+
-+fi
-+
-+
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+# Try to create an executable without -o first, disregard a.out.
-+# It will help us diagnose broken compilers, and finding out an intuition
-+# of exeext.
-+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+#
-+# List of possible output files, starting from the most likely.
-+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-+# only as a last resort. b.out is created by i960 compilers.
-+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-+#
-+# The IRIX 6 linker writes into existing files which may not be
-+# executable, retaining their permissions. Remove them first so a
-+# subsequent execution test works.
-+ac_rmfiles=
-+for ac_file in $ac_files
-+do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-+ esac
-+done
-+rm -f $ac_rmfiles
-+
-+if { (ac_try="$ac_link_default"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link_default") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-+# in a Makefile. We should not override ac_cv_exeext if it was cached,
-+# so that the user can short-circuit this test for compilers unknown to
-+# Autoconf.
-+for ac_file in $ac_files ''
-+do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
-+ ;;
-+ [ab].out )
-+ # We found the default executable, but exeext='' is most
-+ # certainly right.
-+ break;;
-+ *.* )
-+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+ then :; else
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ fi
-+ # We set ac_cv_exeext here because the later test for it is not
-+ # safe: cross compilers may not add the suffix if given an `-o'
-+ # argument, so we may need to know it at that point already.
-+ # Even if this section looks crufty: it has the advantage of
-+ # actually working.
-+ break;;
-+ * )
-+ break;;
-+ esac
-+done
-+test "$ac_cv_exeext" = no && ac_cv_exeext=
-+
-+else
-+ ac_file=''
-+fi
-+
-+{ echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6; }
-+if test -z "$ac_file"; then
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C compiler cannot create executables
-+See \`config.log' for more details." >&2;}
-+ { (exit 77); exit 77; }; }
-+fi
-+
-+ac_exeext=$ac_cv_exeext
-+
-+# Check that the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-+# If not cross compiling, check that we can run a simple program.
-+if test "$cross_compiling" != yes; then
-+ if { ac_try='./$ac_file'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ cross_compiling=no
-+ else
-+ if test "$cross_compiling" = maybe; then
-+ cross_compiling=yes
-+ else
-+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+
-+rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+ac_clean_files=$ac_clean_files_save
-+# Check that the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
-+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-+# work properly (i.e., refer to `conftest.exe'), while it won't with
-+# `rm'.
-+for ac_file in conftest.exe conftest conftest.*; do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ break;;
-+ * ) break;;
-+ esac
-+done
-+else
-+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest$ac_cv_exeext
-+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6; }
-+
-+rm -f conftest.$ac_ext
-+EXEEXT=$ac_cv_exeext
-+ac_exeext=$EXEEXT
-+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-+if test "${ac_cv_objext+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.o conftest.obj
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ for ac_file in conftest.o conftest.obj conftest.*; do
-+ test -f "$ac_file" || continue;
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
-+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-+ break;;
-+ esac
-+done
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest.$ac_cv_objext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6; }
-+OBJEXT=$ac_cv_objext
-+ac_objext=$OBJEXT
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_save_c_werror_flag=$ac_c_werror_flag
-+ ac_c_werror_flag=yes
-+ ac_cv_prog_cc_g=no
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ CFLAGS=""
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-+if test "$ac_test_CFLAGS" = set; then
-+ CFLAGS=$ac_save_CFLAGS
-+elif test $ac_cv_prog_cc_g = yes; then
-+ if test "$GCC" = yes; then
-+ CFLAGS="-g -O2"
-+ else
-+ CFLAGS="-g"
-+ fi
-+else
-+ if test "$GCC" = yes; then
-+ CFLAGS="-O2"
-+ else
-+ CFLAGS=
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_prog_cc_c89=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+ char **p;
-+ int i;
-+{
-+ return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+ char *s;
-+ va_list v;
-+ va_start (v,p);
-+ s = g (p, va_arg (v,int));
-+ va_end (v);
-+ return s;
-+}
-+
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
-+ function prototypes and stuff, but not '\xHH' hex character constants.
-+ These don't provoke an error unfortunately, instead are silently treated
-+ as 'x'. The following induces an error, until -std is added to get
-+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
-+ array size at least. It's necessary to write '\x00'==0 to get something
-+ that's true only with -std. */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+ inside strings and character constants. */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+ CC="$ac_save_CC $ac_arg"
-+ rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_c89=$ac_arg
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext
-+ test "x$ac_cv_prog_cc_c89" != "xno" && break
-+done
-+rm -f conftest.$ac_ext
-+CC=$ac_save_CC
-+
-+fi
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+ x)
-+ { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+ xno)
-+ { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
-+ *)
-+ CC="$CC $ac_cv_prog_cc_c89"
-+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-+esac
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+DEPDIR="${am__leading_dot}deps"
-+
-+ac_config_commands="$ac_config_commands depfiles"
-+
-+
-+am_make=${MAKE-make}
-+cat > confinc << 'END'
-+am__doit:
-+ @echo done
-+.PHONY: am__doit
-+END
-+# If we don't find an include directive, just comment out the code.
-+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-+am__include="#"
-+am__quote=
-+_am_result=none
-+# First try GNU make style include.
-+echo "include confinc" > confmf
-+# We grep out `Entering directory' and `Leaving directory'
-+# messages which can occur if `w' ends up in MAKEFLAGS.
-+# In particular we don't look at `^make:' because GNU make might
-+# be invoked under some other name (usually "gmake"), in which
-+# case it prints its new name instead of `make'.
-+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-+ am__include=include
-+ am__quote=
-+ _am_result=GNU
-+fi
-+# Now try BSD make style include.
-+if test "$am__include" = "#"; then
-+ echo '.include "confinc"' > confmf
-+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-+ am__include=.include
-+ am__quote="\""
-+ _am_result=BSD
-+ fi
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: result: $_am_result" >&5
-+echo "${ECHO_T}$_am_result" >&6; }
-+rm -f confinc confmf
-+
-+# Check whether --enable-dependency-tracking was given.
-+if test "${enable_dependency_tracking+set}" = set; then
-+ enableval=$enable_dependency_tracking;
-+fi
-+
-+if test "x$enable_dependency_tracking" != xno; then
-+ am_depcomp="$ac_aux_dir/depcomp"
-+ AMDEPBACKSLASH='\'
-+fi
-+ if test "x$enable_dependency_tracking" != xno; then
-+ AMDEP_TRUE=
-+ AMDEP_FALSE='#'
-+else
-+ AMDEP_TRUE='#'
-+ AMDEP_FALSE=
-+fi
-+
-+
-+
-+depcc="$CC" am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+ # We make a subdir and do the tests there. Otherwise we can end up
-+ # making bogus files that we don't know about and never remove. For
-+ # instance it was reported that on HP-UX the gcc test will end up
-+ # making a dummy file named `D' -- because `-MD' means `put the output
-+ # in D'.
-+ mkdir conftest.dir
-+ # Copy depcomp to subdir because otherwise we won't find it if we're
-+ # using a relative directory.
-+ cp "$am_depcomp" conftest.dir
-+ cd conftest.dir
-+ # We will build objects and dependencies in a subdirectory because
-+ # it helps to detect inapplicable dependency modes. For instance
-+ # both Tru64's cc and ICC support -MD to output dependencies as a
-+ # side effect of compilation, but ICC will put the dependencies in
-+ # the current directory while Tru64 will put them in the object
-+ # directory.
-+ mkdir sub
-+
-+ am_cv_CC_dependencies_compiler_type=none
-+ if test "$am_compiler_list" = ""; then
-+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+ fi
-+ for depmode in $am_compiler_list; do
-+ # Setup a source with many dependencies, because some compilers
-+ # like to wrap large dependency lists on column 80 (with \), and
-+ # we should not choose a depcomp mode which is confused by this.
-+ #
-+ # We need to recreate these files for each test, as the compiler may
-+ # overwrite some of them when testing with obscure command lines.
-+ # This happens at least with the AIX C compiler.
-+ : > sub/conftest.c
-+ for i in 1 2 3 4 5 6; do
-+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
-+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-+ # Solaris 8's {/usr,}/bin/sh.
-+ touch sub/conftst$i.h
-+ done
-+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-+
-+ case $depmode in
-+ nosideeffect)
-+ # after this tag, mechanisms are not by side-effect, so they'll
-+ # only be used when explicitly requested
-+ if test "x$enable_dependency_tracking" = xyes; then
-+ continue
-+ else
-+ break
-+ fi
-+ ;;
-+ none) break ;;
-+ esac
-+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+ # mode. It turns out that the SunPro C++ compiler does not properly
-+ # handle `-M -o', and we need to detect this.
-+ if depmode=$depmode \
-+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-+ >/dev/null 2>conftest.err &&
-+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+ # icc doesn't choke on unknown options, it will just issue warnings
-+ # or remarks (even with -Werror). So we grep stderr for any message
-+ # that says an option was ignored or not supported.
-+ # When given -MP, icc 7.0 and 7.1 complain thusly:
-+ # icc: Command line warning: ignoring option '-M'; no argument required
-+ # The diagnosis changed in icc 8.0:
-+ # icc: Command line remark: option '-MP' not supported
-+ if (grep 'ignoring option' conftest.err ||
-+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-+ am_cv_CC_dependencies_compiler_type=$depmode
-+ break
-+ fi
-+ fi
-+ done
-+
-+ cd ..
-+ rm -rf conftest.dir
-+else
-+ am_cv_CC_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-+
-+ if
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-+ am__fastdepCC_TRUE=
-+ am__fastdepCC_FALSE='#'
-+else
-+ am__fastdepCC_TRUE='#'
-+ am__fastdepCC_FALSE=
-+fi
-+
-+
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+if test -z "$CXX"; then
-+ if test -n "$CCC"; then
-+ CXX=$CCC
-+ else
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CXX"; then
-+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CXX=$ac_cv_prog_CXX
-+if test -n "$CXX"; then
-+ { echo "$as_me:$LINENO: result: $CXX" >&5
-+echo "${ECHO_T}$CXX" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$CXX" && break
-+ done
-+fi
-+if test -z "$CXX"; then
-+ ac_ct_CXX=$CXX
-+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CXX"; then
-+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_CXX="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-+if test -n "$ac_ct_CXX"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-+echo "${ECHO_T}$ac_ct_CXX" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$ac_ct_CXX" && break
-+done
-+
-+ if test "x$ac_ct_CXX" = x; then
-+ CXX="g++"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CXX=$ac_ct_CXX
-+ fi
-+fi
-+
-+ fi
-+fi
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-+GXX=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CXXFLAGS=${CXXFLAGS+set}
-+ac_save_CXXFLAGS=$CXXFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cxx_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-+ ac_cxx_werror_flag=yes
-+ ac_cv_prog_cxx_g=no
-+ CXXFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cxx_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ CXXFLAGS=""
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-+ CXXFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cxx_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-+if test "$ac_test_CXXFLAGS" = set; then
-+ CXXFLAGS=$ac_save_CXXFLAGS
-+elif test $ac_cv_prog_cxx_g = yes; then
-+ if test "$GXX" = yes; then
-+ CXXFLAGS="-g -O2"
-+ else
-+ CXXFLAGS="-g"
-+ fi
-+else
-+ if test "$GXX" = yes; then
-+ CXXFLAGS="-O2"
-+ else
-+ CXXFLAGS=
-+ fi
-+fi
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+depcc="$CXX" am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+ # We make a subdir and do the tests there. Otherwise we can end up
-+ # making bogus files that we don't know about and never remove. For
-+ # instance it was reported that on HP-UX the gcc test will end up
-+ # making a dummy file named `D' -- because `-MD' means `put the output
-+ # in D'.
-+ mkdir conftest.dir
-+ # Copy depcomp to subdir because otherwise we won't find it if we're
-+ # using a relative directory.
-+ cp "$am_depcomp" conftest.dir
-+ cd conftest.dir
-+ # We will build objects and dependencies in a subdirectory because
-+ # it helps to detect inapplicable dependency modes. For instance
-+ # both Tru64's cc and ICC support -MD to output dependencies as a
-+ # side effect of compilation, but ICC will put the dependencies in
-+ # the current directory while Tru64 will put them in the object
-+ # directory.
-+ mkdir sub
-+
-+ am_cv_CXX_dependencies_compiler_type=none
-+ if test "$am_compiler_list" = ""; then
-+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+ fi
-+ for depmode in $am_compiler_list; do
-+ # Setup a source with many dependencies, because some compilers
-+ # like to wrap large dependency lists on column 80 (with \), and
-+ # we should not choose a depcomp mode which is confused by this.
-+ #
-+ # We need to recreate these files for each test, as the compiler may
-+ # overwrite some of them when testing with obscure command lines.
-+ # This happens at least with the AIX C compiler.
-+ : > sub/conftest.c
-+ for i in 1 2 3 4 5 6; do
-+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
-+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-+ # Solaris 8's {/usr,}/bin/sh.
-+ touch sub/conftst$i.h
-+ done
-+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-+
-+ case $depmode in
-+ nosideeffect)
-+ # after this tag, mechanisms are not by side-effect, so they'll
-+ # only be used when explicitly requested
-+ if test "x$enable_dependency_tracking" = xyes; then
-+ continue
-+ else
-+ break
-+ fi
-+ ;;
-+ none) break ;;
-+ esac
-+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+ # mode. It turns out that the SunPro C++ compiler does not properly
-+ # handle `-M -o', and we need to detect this.
-+ if depmode=$depmode \
-+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-+ >/dev/null 2>conftest.err &&
-+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+ # icc doesn't choke on unknown options, it will just issue warnings
-+ # or remarks (even with -Werror). So we grep stderr for any message
-+ # that says an option was ignored or not supported.
-+ # When given -MP, icc 7.0 and 7.1 complain thusly:
-+ # icc: Command line warning: ignoring option '-M'; no argument required
-+ # The diagnosis changed in icc 8.0:
-+ # icc: Command line remark: option '-MP' not supported
-+ if (grep 'ignoring option' conftest.err ||
-+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-+ am_cv_CXX_dependencies_compiler_type=$depmode
-+ break
-+ fi
-+ fi
-+ done
-+
-+ cd ..
-+ rm -rf conftest.dir
-+else
-+ am_cv_CXX_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
-+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-+
-+ if
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
-+ am__fastdepCXX_TRUE=
-+ am__fastdepCXX_FALSE='#'
-+else
-+ am__fastdepCXX_TRUE='#'
-+ am__fastdepCXX_FALSE=
-+fi
-+
-+
-+
-+# By default we simply use the C compiler to build assembly code.
-+
-+test "${CCAS+set}" = set || CCAS=$CC
-+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-+
-+
-+
-+depcc="$CCAS" am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+ # We make a subdir and do the tests there. Otherwise we can end up
-+ # making bogus files that we don't know about and never remove. For
-+ # instance it was reported that on HP-UX the gcc test will end up
-+ # making a dummy file named `D' -- because `-MD' means `put the output
-+ # in D'.
-+ mkdir conftest.dir
-+ # Copy depcomp to subdir because otherwise we won't find it if we're
-+ # using a relative directory.
-+ cp "$am_depcomp" conftest.dir
-+ cd conftest.dir
-+ # We will build objects and dependencies in a subdirectory because
-+ # it helps to detect inapplicable dependency modes. For instance
-+ # both Tru64's cc and ICC support -MD to output dependencies as a
-+ # side effect of compilation, but ICC will put the dependencies in
-+ # the current directory while Tru64 will put them in the object
-+ # directory.
-+ mkdir sub
-+
-+ am_cv_CCAS_dependencies_compiler_type=none
-+ if test "$am_compiler_list" = ""; then
-+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+ fi
-+ for depmode in $am_compiler_list; do
-+ # Setup a source with many dependencies, because some compilers
-+ # like to wrap large dependency lists on column 80 (with \), and
-+ # we should not choose a depcomp mode which is confused by this.
-+ #
-+ # We need to recreate these files for each test, as the compiler may
-+ # overwrite some of them when testing with obscure command lines.
-+ # This happens at least with the AIX C compiler.
-+ : > sub/conftest.c
-+ for i in 1 2 3 4 5 6; do
-+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
-+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-+ # Solaris 8's {/usr,}/bin/sh.
-+ touch sub/conftst$i.h
-+ done
-+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-+
-+ case $depmode in
-+ nosideeffect)
-+ # after this tag, mechanisms are not by side-effect, so they'll
-+ # only be used when explicitly requested
-+ if test "x$enable_dependency_tracking" = xyes; then
-+ continue
-+ else
-+ break
-+ fi
-+ ;;
-+ none) break ;;
-+ esac
-+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+ # mode. It turns out that the SunPro C++ compiler does not properly
-+ # handle `-M -o', and we need to detect this.
-+ if depmode=$depmode \
-+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-+ >/dev/null 2>conftest.err &&
-+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+ # icc doesn't choke on unknown options, it will just issue warnings
-+ # or remarks (even with -Werror). So we grep stderr for any message
-+ # that says an option was ignored or not supported.
-+ # When given -MP, icc 7.0 and 7.1 complain thusly:
-+ # icc: Command line warning: ignoring option '-M'; no argument required
-+ # The diagnosis changed in icc 8.0:
-+ # icc: Command line remark: option '-MP' not supported
-+ if (grep 'ignoring option' conftest.err ||
-+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-+ am_cv_CCAS_dependencies_compiler_type=$depmode
-+ break
-+ fi
-+ fi
-+ done
-+
-+ cd ..
-+ rm -rf conftest.dir
-+else
-+ am_cv_CCAS_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CCAS_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CCAS_dependencies_compiler_type" >&6; }
-+CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type
-+
-+ if
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then
-+ am__fastdepCCAS_TRUE=
-+ am__fastdepCCAS_FALSE='#'
-+else
-+ am__fastdepCCAS_TRUE='#'
-+ am__fastdepCCAS_FALSE=
-+fi
-+
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$AR"; then
-+ ac_cv_prog_AR="$AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AR=$ac_cv_prog_AR
-+if test -n "$AR"; then
-+ { echo "$as_me:$LINENO: result: $AR" >&5
-+echo "${ECHO_T}$AR" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_AR"; then
-+ ac_ct_AR=$AR
-+ # Extract the first word of "ar", so it can be a program name with args.
-+set dummy ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_AR"; then
-+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_AR="ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_AR=$ac_cv_prog_ac_ct_AR
-+if test -n "$ac_ct_AR"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-+echo "${ECHO_T}$ac_ct_AR" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_AR" = x; then
-+ AR=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ AR=$ac_ct_AR
-+ fi
-+else
-+ AR="$ac_cv_prog_AR"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$RANLIB"; then
-+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+RANLIB=$ac_cv_prog_RANLIB
-+if test -n "$RANLIB"; then
-+ { echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_RANLIB"; then
-+ ac_ct_RANLIB=$RANLIB
-+ # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_RANLIB"; then
-+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_RANLIB="ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_RANLIB" = x; then
-+ RANLIB=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ RANLIB=$ac_ct_RANLIB
-+ fi
-+else
-+ RANLIB="$ac_cv_prog_RANLIB"
-+fi
-+ # :)
-+
-+# Find a good install program. We prefer a C program (faster),
-+# so one script is as good as another. But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
-+# ./install, which can be erroneously created by make from ./install.sh.
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+if test -z "$INSTALL"; then
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-+ if test $ac_prog = install &&
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # AIX install. It has an incompatible calling convention.
-+ :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
-+ else
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
-+ fi
-+ done
-+ done
-+ ;;
-+esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+ if test "${ac_cv_path_install+set}" = set; then
-+ INSTALL=$ac_cv_path_install
-+ else
-+ # As a last resort, use the slow shell script. Don't cache a
-+ # value for INSTALL within a source directory, because that will
-+ # break other packages using the cache if that directory is
-+ # removed, or if the value is a relative name.
-+ INSTALL=$ac_install_sh
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+
-+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
-+ # Check whether --enable-maintainer-mode was given.
-+if test "${enable_maintainer_mode+set}" = set; then
-+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-+else
-+ USE_MAINTAINER_MODE=no
-+fi
-+
-+ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
-+ if test $USE_MAINTAINER_MODE = yes; then
-+ MAINTAINER_MODE_TRUE=
-+ MAINTAINER_MODE_FALSE='#'
-+else
-+ MAINTAINER_MODE_TRUE='#'
-+ MAINTAINER_MODE_FALSE=
-+fi
-+
-+ MAINT=$MAINTAINER_MODE_TRUE
-+
-+
-+
-+. ${srcdir}/configure.host
-+
-+# We use a separate variable to pass down CPPFLAGS and CFLAGS from the main mono
-+# configure, because of autoconf brokeness
-+if test "x$CPPFLAGS_FOR_LIBGC" != "x"; then
-+ CPPFLAGS=$CPPFLAGS_FOR_LIBGC
-+fi
-+if test "x$CFLAGS_FOR_LIBGC" != "x"; then
-+ CFLAGS=$CFLAGS_FOR_LIBGC
-+fi
-+
-+GC_CFLAGS=${gc_cflags}
-+
-+
-+case $enable_embed_check in
-+no) ;;
-+*) { { echo "$as_me:$LINENO: error: This module is now part of 'mono' and cannot be built as a stand-alone module any longer." >&5
-+echo "$as_me: error: This module is now part of 'mono' and cannot be built as a stand-alone module any longer." >&2;}
-+ { (exit 1); exit 1; }; } ;;
-+esac
-+
-+THREADS=$with_libgc_threads
-+
-+# Check whether --enable-win32-dllmain was given.
-+if test "${enable_win32_dllmain+set}" = set; then
-+ enableval=$enable_win32_dllmain;
-+fi
-+
-+
-+# Check whether --enable-parallel-mark was given.
-+if test "${enable_parallel_mark+set}" = set; then
-+ enableval=$enable_parallel_mark; case "$THREADS" in
-+ no | none | single)
-+ { { echo "$as_me:$LINENO: error: Parallel mark requires --enable-threads=x spec" >&5
-+echo "$as_me: error: Parallel mark requires --enable-threads=x spec" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+
-+fi
-+
-+
-+# Check whether --enable-cplusplus was given.
-+if test "${enable_cplusplus+set}" = set; then
-+ enableval=$enable_cplusplus;
-+fi
-+
-+
-+INCLUDES=-I${srcdir}/include
-+THREADDLLIBS=
-+## Libraries needed to support dynamic loading and/or threads.
-+case "$THREADS" in
-+ no | none | single)
-+ THREADS=none
-+ ;;
-+ posix | pthreads)
-+ THREADS=posix
-+ THREADDLLIBS=-lpthread
-+ case "$host" in
-+ x86-*-linux* | ia64-*-linux* | i386-*-linux* | i486-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* | alpha*-*-linux* | s390*-*-linux* | sparc*-*-linux* | powerpc-*-linux*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_LINUX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ ;;
-+ *-*-linux*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_LINUX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ ;;
-+ *-*-aix*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_AIX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ ;;
-+ *-*-hpux*)
-+ { echo "$as_me:$LINENO: WARNING: \"Only HP/UX 11 threads are supported.\"" >&5
-+echo "$as_me: WARNING: \"Only HP/UX 11 threads are supported.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_HPUX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _POSIX_C_SOURCE 199506L
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ THREADDLLIBS="-lpthread -lrt"
-+ ;;
-+ *-*-kfreebsd*-gnu)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_FREEBSD_THREADS 1
-+_ACEOF
-+
-+ INCLUDES="$INCLUDES -pthread"
-+ THREADDLLIBS=-pthread
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define USE_COMPILER_TLS 1
-+_ACEOF
-+
-+ ;;
-+ *-*-freebsd4*)
-+ { echo "$as_me:$LINENO: WARNING: \"FreeBSD does not yet fully support threads with Boehm GC.\"" >&5
-+echo "$as_me: WARNING: \"FreeBSD does not yet fully support threads with Boehm GC.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_FREEBSD_THREADS 1
-+_ACEOF
-+
-+ if test "x$PTHREAD_CFLAGS" = "x"; then
-+ INCLUDES="$INCLUDES -pthread"
-+ else
-+ INCLUDES="$INCLUDES $PTHREAD_CFLAGS"
-+ fi
-+ if test "x$PTHREAD_LIBS" = "x"; then
-+ THREADDLLIBS=-pthread
-+ else
-+ THREADDLLIBS=$PTHREAD_LIBS
-+ fi
-+ ;;
-+ *-*-freebsd5*)
-+ { echo "$as_me:$LINENO: WARNING: \"FreeBSD does not yet fully support threads with Boehm GC.\"" >&5
-+echo "$as_me: WARNING: \"FreeBSD does not yet fully support threads with Boehm GC.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_FREEBSD_THREADS 1
-+_ACEOF
-+
-+ INCLUDES="$INCLUDES -pthread"
-+ THREADDLLIBS=-pthread
-+ ;;
-+ *-*-freebsd6*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_FREEBSD_THREADS 1
-+_ACEOF
-+
-+ if test "x$PTHREAD_CFLAGS" != "x"; then
-+ INCLUDES="$INCLUDES $PTHREAD_CFLAGS"
-+ fi
-+ if test "x$PTHREAD_LIBS" = "x"; then
-+ THREADDLLIBS=-pthread
-+ else
-+ THREADDLLIBS="$PTHREAD_LIBS"
-+ fi
-+ ;;
-+ *-*-solaris*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_SOLARIS_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_SOLARIS_PTHREADS 1
-+_ACEOF
-+
-+ ;;
-+ *-*-irix*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_IRIX_THREADS 1
-+_ACEOF
-+
-+ ;;
-+ *-*-cygwin*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_WIN32_THREADS 1
-+_ACEOF
-+
-+ ;;
-+ *-*-darwin*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_DARWIN_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ ;;
-+ *-*-netbsd*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_NETBSD_THREADS 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ ;;
-+ *-*-osf*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_OSF1_THREADS 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ # May want to enable it in other cases, too.
-+ # Measurements havent yet been done.
-+ fi
-+ INCLUDES="$INCLUDES -pthread"
-+ THREADDLLIBS="-lpthread -lrt"
-+ ;;
-+ *)
-+ { { echo "$as_me:$LINENO: error: \"Pthreads not supported by the GC on this platform.\"" >&5
-+echo "$as_me: error: \"Pthreads not supported by the GC on this platform.\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+ ;;
-+ win32)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_WIN32_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_GETENV 1
-+_ACEOF
-+
-+ if test "${enable_win32_dllmain}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_INSIDE_DLL 1
-+_ACEOF
-+
-+ fi
-+ ;;
-+ dgux386)
-+ THREADS=dgux386
-+ { echo "$as_me:$LINENO: result: $THREADDLLIBS" >&5
-+echo "${ECHO_T}$THREADDLLIBS" >&6; }
-+ # Use pthread GCC switch
-+ THREADDLLIBS=-pthread
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_DGUX386_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define DGUX_THREADS 1
-+_ACEOF
-+
-+ # Enable _POSIX4A_DRAFT10_SOURCE with flag -pthread
-+ INCLUDES="-pthread $INCLUDES"
-+ ;;
-+ aix)
-+ THREADS=posix
-+ THREADDLLIBS=-lpthread
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_AIX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ ;;
-+ decosf1 | irix | mach | os2 | solaris | dce | vxworks)
-+ { { echo "$as_me:$LINENO: error: thread package $THREADS not yet supported" >&5
-+echo "$as_me: error: thread package $THREADS not yet supported" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ *)
-+ { { echo "$as_me:$LINENO: error: $THREADS is an unknown thread package" >&5
-+echo "$as_me: error: $THREADS is an unknown thread package" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+esac
-+
-+
-+case "$host" in
-+ powerpc-*-darwin*)
-+ powerpc_darwin=true
-+ ;;
-+esac
-+ if test x$powerpc_darwin = xtrue; then
-+ POWERPC_DARWIN_TRUE=
-+ POWERPC_DARWIN_FALSE='#'
-+else
-+ POWERPC_DARWIN_TRUE='#'
-+ POWERPC_DARWIN_FALSE=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking for xlc" >&5
-+echo $ECHO_N "checking for xlc... $ECHO_C" >&6; }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ #ifndef __xlC__
-+ # error
-+ #endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ compiler_xlc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ compiler_xlc=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $compiler_xlc" >&5
-+echo "${ECHO_T}$compiler_xlc" >&6; }
-+ if test $compiler_xlc = yes; then
-+ COMPILER_XLC_TRUE=
-+ COMPILER_XLC_FALSE='#'
-+else
-+ COMPILER_XLC_TRUE='#'
-+ COMPILER_XLC_FALSE=
-+fi
-+
-+if test $compiler_xlc = yes -a "$powerpc_darwin" = true; then
-+ # the darwin stack-frame-walking code is completely broken on xlc
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define DARWIN_DONT_PARSE_STACK 1
-+_ACEOF
-+
-+fi
-+
-+# We never want libdl on darwin. It is a fake libdl that just ends up making
-+# dyld calls anyway
-+case "$host" in
-+ *-*-darwin*) ;;
-+ *)
-+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ THREADDLLIBS="$THREADDLLIBS -ldl"
-+fi
-+
-+ ;;
-+esac
-+
-+
-+
-+target_all=libgc.la
-+
-+
-+TARGET_ECOS="no"
-+
-+# Check whether --with-ecos was given.
-+if test "${with_ecos+set}" = set; then
-+ withval=$with_ecos; TARGET_ECOS="$with_ecos"
-+
-+fi
-+
-+
-+addobjs=
-+addlibs=
-+addincludes=
-+addtests=
-+CXXINCLUDES=
-+case "$TARGET_ECOS" in
-+ no)
-+ ;;
-+ *)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define ECOS 1
-+_ACEOF
-+
-+ CXXINCLUDES="-I${TARGET_ECOS}/include"
-+ addobjs="$addobjs ecos.lo"
-+ ;;
-+esac
-+
-+if test "${enable_cplusplus}" = yes; then
-+ addincludes="$addincludes include/gc_cpp.h include/gc_allocator.h"
-+ addtests="$addtests test_cpp"
-+fi
-+
-+ if test "${enable_cplusplus}" = yes; then
-+ CPLUSPLUS_TRUE=
-+ CPLUSPLUS_FALSE='#'
-+else
-+ CPLUSPLUS_TRUE='#'
-+ CPLUSPLUS_FALSE=
-+fi
-+
-+
-+
-+
-+
-+
-+
-+# Configuration of shared libraries
-+#
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+# Check whether --enable-shared was given.
-+if test "${enable_shared+set}" = set; then
-+ enableval=$enable_shared; p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_shared=yes ;;
-+ no) enable_shared=no ;;
-+ *)
-+ enable_shared=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_shared=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
-+else
-+ enable_shared=yes
-+fi
-+
-+
-+
-+case "$host" in
-+ alpha-*-openbsd*)
-+ enable_shared=no
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+ ;;
-+ *)
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+ ;;
-+esac
-+
-+# Configuration of machine-dependent code
-+#
-+{ echo "$as_me:$LINENO: checking which machine-dependent code should be used" >&5
-+echo $ECHO_N "checking which machine-dependent code should be used... $ECHO_C" >&6; }
-+machdep=
-+case "$host" in
-+ alpha-*-openbsd*)
-+ machdep="alpha_mach_dep.lo"
-+ if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then
-+ { echo "$as_me:$LINENO: WARNING: OpenBSD/Alpha without dlopen(). Shared library support is disabled" >&5
-+echo "$as_me: WARNING: OpenBSD/Alpha without dlopen(). Shared library support is disabled" >&2;}
-+ fi
-+ ;;
-+ alpha*-*-linux*)
-+ machdep="alpha_mach_dep.lo"
-+ ;;
-+ i?86-*-solaris2.[89] | i?86-*-solaris2.1?)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SOLARIS25_PROC_VDB_BUG_FIXED 1
-+_ACEOF
-+
-+ ;;
-+ mipstx39-*-elf*)
-+ machdep="mips_ultrix_mach_dep.lo"
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define STACKBASE __stackbase
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define DATASTART_IS_ETEXT 1
-+_ACEOF
-+
-+ ;;
-+ mips-dec-ultrix*)
-+ machdep="mips_ultrix_mach-dep.lo"
-+ ;;
-+ mips-nec-sysv*|mips-unknown-sysv*)
-+ ;;
-+ mips*-*-linux*)
-+ ;;
-+ mips-*-*)
-+ machdep="mips_sgi_mach_dep.lo"
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_EXECUTE_PERMISSION 1
-+_ACEOF
-+
-+ ;;
-+ sparc-*-netbsd*)
-+ machdep="sparc_netbsd_mach_dep.lo"
-+ ;;
-+ sparc-sun-solaris2.3)
-+ machdep="sparc_mach_dep.lo"
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SUNOS53_SHARED_LIB 1
-+_ACEOF
-+
-+ ;;
-+ sparc*-sun-solaris2.*)
-+ machdep="sparc_mach_dep.lo"
-+ ;;
-+ ia64-*-*)
-+ machdep="mach_dep.lo ia64_save_regs_in_stack.lo"
-+ ;;
-+esac
-+if test x"$machdep" = x; then
-+{ echo "$as_me:$LINENO: result: $machdep" >&5
-+echo "${ECHO_T}$machdep" >&6; }
-+ machdep="mach_dep.lo"
-+fi
-+addobjs="$addobjs $machdep"
-+
-+
-+
-+
-+
-+# Check whether --enable-static was given.
-+if test "${enable_static+set}" = set; then
-+ enableval=$enable_static; p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_static=yes ;;
-+ no) enable_static=no ;;
-+ *)
-+ enable_static=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_static=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
-+else
-+ enable_static=yes
-+fi
-+
-+
-+# Check whether --enable-fast-install was given.
-+if test "${enable_fast_install+set}" = set; then
-+ enableval=$enable_fast_install; p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_fast_install=yes ;;
-+ no) enable_fast_install=no ;;
-+ *)
-+ enable_fast_install=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_fast_install=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
-+else
-+ enable_fast_install=yes
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-+if test "${lt_cv_path_SED+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for lt_ac_prog in sed gsed; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
-+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-+ fi
-+ done
-+ done
-+done
-+IFS=$as_save_IFS
-+lt_ac_max=0
-+lt_ac_count=0
-+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+# along with /bin/sed that truncates output.
-+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-+ test ! -f $lt_ac_sed && continue
-+ cat /dev/null > conftest.in
-+ lt_ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-+ # Check for GNU sed and select it if it is found.
-+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-+ lt_cv_path_SED=$lt_ac_sed
-+ break
-+ fi
-+ while true; do
-+ cat conftest.in conftest.in >conftest.tmp
-+ mv conftest.tmp conftest.in
-+ cp conftest.in conftest.nl
-+ echo >>conftest.nl
-+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-+ cmp -s conftest.out conftest.nl || break
-+ # 10000 chars as input seems more than enough
-+ test $lt_ac_count -gt 10 && break
-+ lt_ac_count=`expr $lt_ac_count + 1`
-+ if test $lt_ac_count -gt $lt_ac_max; then
-+ lt_ac_max=$lt_ac_count
-+ lt_cv_path_SED=$lt_ac_sed
-+ fi
-+ done
-+done
-+
-+fi
-+
-+SED=$lt_cv_path_SED
-+
-+{ echo "$as_me:$LINENO: result: $SED" >&5
-+echo "${ECHO_T}$SED" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-+if test "${ac_cv_path_GREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Extract the first word of "grep ggrep" to use in msg output
-+if test -z "$GREP"; then
-+set dummy grep ggrep; ac_prog_name=$2
-+if test "${ac_cv_path_GREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_path_GREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in grep ggrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-+ # Check for GNU ac_path_GREP and select it if it is found.
-+ # Check for GNU $ac_path_GREP
-+case `"$ac_path_GREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-+*)
-+ ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ echo 'GREP' >> "conftest.nl"
-+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ ac_count=`expr $ac_count + 1`
-+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_GREP="$ac_path_GREP"
-+ ac_path_GREP_max=$ac_count
-+ fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+ $ac_path_GREP_found && break 3
-+ done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+GREP="$ac_cv_path_GREP"
-+if test -z "$GREP"; then
-+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+ ac_cv_path_GREP=$GREP
-+fi
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
-+ GREP="$ac_cv_path_GREP"
-+
-+
-+{ echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-+ then ac_cv_path_EGREP="$GREP -E"
-+ else
-+ # Extract the first word of "egrep" to use in msg output
-+if test -z "$EGREP"; then
-+set dummy egrep; ac_prog_name=$2
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_path_EGREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in egrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-+ # Check for GNU ac_path_EGREP and select it if it is found.
-+ # Check for GNU $ac_path_EGREP
-+case `"$ac_path_EGREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-+*)
-+ ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ echo 'EGREP' >> "conftest.nl"
-+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ ac_count=`expr $ac_count + 1`
-+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_EGREP="$ac_path_EGREP"
-+ ac_path_EGREP_max=$ac_count
-+ fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+ $ac_path_EGREP_found && break 3
-+ done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+EGREP="$ac_cv_path_EGREP"
-+if test -z "$EGREP"; then
-+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+ ac_cv_path_EGREP=$EGREP
-+fi
-+
-+
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
-+ EGREP="$ac_cv_path_EGREP"
-+
-+
-+
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-+else
-+ with_gnu_ld=no
-+fi
-+
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [\\/]* | ?:[\\/]*)
-+ re_direlt='/[^/][^/]*/\.\./'
-+ # Canonicalize the pathname of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ { echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-+else
-+ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$LD"; then
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some variants of GNU ld only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break
-+ ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+else
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+ { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+ { (exit 1); exit 1; }; }
-+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-+if test "${lt_cv_ld_reload_flag+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_ld_reload_flag='-r'
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-+reload_flag=$lt_cv_ld_reload_flag
-+case $reload_flag in
-+"" | " "*) ;;
-+*) reload_flag=" $reload_flag" ;;
-+esac
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+case $host_os in
-+ darwin*)
-+ if test "$GCC" = yes; then
-+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-+ else
-+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
-+if test "${lt_cv_path_NM+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$NM"; then
-+ # Let the user override the test.
-+ lt_cv_path_NM="$NM"
-+else
-+ lt_nm_to_check="${ac_tool_prefix}nm"
-+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-+ lt_nm_to_check="$lt_nm_to_check nm"
-+ fi
-+ for lt_tmp_nm in $lt_nm_to_check; do
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ tmp_nm="$ac_dir/$lt_tmp_nm"
-+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-+ # Check to see if the nm accepts a BSD-compat flag.
-+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+ # nm: unknown option "B" ignored
-+ # Tru64's nm complains that /dev/null is an invalid object file
-+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-+ */dev/null* | *'Invalid file or object type'*)
-+ lt_cv_path_NM="$tmp_nm -B"
-+ break
-+ ;;
-+ *)
-+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-+ */dev/null*)
-+ lt_cv_path_NM="$tmp_nm -p"
-+ break
-+ ;;
-+ *)
-+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-+ continue # so that we can try to find one that supports BSD flags
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ done
-+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-+fi
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-+echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-+NM="$lt_cv_path_NM"
-+
-+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-+LN_S=$as_ln_s
-+if test "$LN_S" = "ln -s"; then
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-+echo "${ECHO_T}no, using $LN_S" >&6; }
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
-+if test "${lt_cv_deplibs_check_method+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_file_magic_cmd='$MAGIC_CMD'
-+lt_cv_file_magic_test_file=
-+lt_cv_deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [[regex]]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given extended regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+
-+case $host_os in
-+aix[4-9]*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+beos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+bsdi[45]*)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-+ lt_cv_file_magic_cmd='/usr/bin/file -L'
-+ lt_cv_file_magic_test_file=/shlib/libc.so
-+ ;;
-+
-+cygwin*)
-+ # func_win32_libid is a shell function defined in ltmain.sh
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='func_win32_libid'
-+ ;;
-+
-+mingw* | pw32*)
-+ # Base MSYS/MinGW do not provide the 'file' command needed by
-+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
-+ # unless we find 'file', for example because we are cross-compiling.
-+ if ( file / ) >/dev/null 2>&1; then
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='func_win32_libid'
-+ else
-+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ lt_cv_file_magic_cmd='$OBJDUMP -f'
-+ fi
-+ ;;
-+
-+darwin* | rhapsody*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ case $host_cpu in
-+ i*86 )
-+ # Not sure whether the presence of OpenBSD here was a mistake.
-+ # Let's accept both of them until this is cleared up.
-+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ ;;
-+ esac
-+ else
-+ lt_cv_deplibs_check_method=pass_all
-+ fi
-+ ;;
-+
-+gnu*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+hpux10.20* | hpux11*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ case $host_cpu in
-+ ia64*)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-+ ;;
-+ hppa*64*)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-+ ;;
-+ *)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
-+ ;;
-+ esac
-+ ;;
-+
-+interix[3-9]*)
-+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $LD in
-+ *-32|*"-32 ") libmagic=32-bit;;
-+ *-n32|*"-n32 ") libmagic=N32;;
-+ *-64|*"-64 ") libmagic=64-bit;;
-+ *) libmagic=never-match;;
-+ esac
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-+ fi
-+ ;;
-+
-+newos6*)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
-+ ;;
-+
-+nto-qnx*)
-+ lt_cv_deplibs_check_method=unknown
-+ ;;
-+
-+openbsd*)
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+ fi
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+rdos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+solaris*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ case $host_vendor in
-+ motorola)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-+ ;;
-+ ncr)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ sequent)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-+ ;;
-+ sni)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-+ lt_cv_file_magic_test_file=/lib/libc.so
-+ ;;
-+ siemens)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ pc)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ esac
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+esac
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
-+file_magic_cmd=$lt_cv_file_magic_cmd
-+deplibs_check_method=$lt_cv_deplibs_check_method
-+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-+
-+
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+# Check whether --enable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+ enableval=$enable_libtool_lock;
-+fi
-+
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+# Some flags need to be propagated to the compiler or linker for good
-+# libtool support.
-+case $host in
-+ia64-*-hpux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *ELF-32*)
-+ HPUX_IA64_MODE="32"
-+ ;;
-+ *ELF-64*)
-+ HPUX_IA64_MODE="64"
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+*-*-irix6*)
-+ # Find out which ABI we are using.
-+ echo '#line __oline__ "configure"' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -melf32bsmip"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -melf32bmipn32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -melf64bmip"
-+ ;;
-+ esac
-+ else
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -32"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -n32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -64"
-+ ;;
-+ esac
-+ fi
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-+s390*-*linux*|sparc*-*linux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.o` in
-+ *32-bit*)
-+ case $host in
-+ x86_64-*kfreebsd*-gnu)
-+ LD="${LD-ld} -m elf_i386_fbsd"
-+ ;;
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_i386"
-+ ;;
-+ ppc64-*linux*|powerpc64-*linux*)
-+ LD="${LD-ld} -m elf32ppclinux"
-+ ;;
-+ s390x-*linux*)
-+ LD="${LD-ld} -m elf_s390"
-+ ;;
-+ sparc64-*linux*)
-+ LD="${LD-ld} -m elf32_sparc"
-+ ;;
-+ esac
-+ ;;
-+ *64-bit*)
-+ case $host in
-+ x86_64-*kfreebsd*-gnu)
-+ LD="${LD-ld} -m elf_x86_64_fbsd"
-+ ;;
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_x86_64"
-+ ;;
-+ ppc*-*linux*|powerpc*-*linux*)
-+ LD="${LD-ld} -m elf64ppc"
-+ ;;
-+ s390*-*linux*)
-+ LD="${LD-ld} -m elf64_s390"
-+ ;;
-+ sparc*-*linux*)
-+ LD="${LD-ld} -m elf64_sparc"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+*-*-sco3.2v5*)
-+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-+ SAVE_CFLAGS="$CFLAGS"
-+ CFLAGS="$CFLAGS -belf"
-+ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
-+if test "${lt_cv_cc_needs_belf+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ lt_cv_cc_needs_belf=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ lt_cv_cc_needs_belf=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
-+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-+ CFLAGS="$SAVE_CFLAGS"
-+ fi
-+ ;;
-+sparc*-*solaris*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.o` in
-+ *64-bit*)
-+ case $lt_cv_prog_gnu_ld in
-+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
-+ *)
-+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-+ LD="${LD-ld} -64"
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+
-+esac
-+
-+need_locks="$enable_libtool_lock"
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-+# On Suns, sometimes $CPP names a directory.
-+if test -n "$CPP" && test -d "$CPP"; then
-+ CPP=
-+fi
-+if test -z "$CPP"; then
-+ if test "${ac_cv_prog_CPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Double quotes because CPP needs to be expanded
-+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@ifdef __STDC__
-+@%:@ include <limits.h>
-+@%:@else
-+@%:@ include <assert.h>
-+@%:@endif
-+ Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether nonexistent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
-+fi
-+
-+ done
-+ ac_cv_prog_CPP=$CPP
-+
-+fi
-+ CPP=$ac_cv_prog_CPP
-+else
-+ ac_cv_prog_CPP=$CPP
-+fi
-+{ echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6; }
-+ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@ifdef __STDC__
-+@%:@ include <limits.h>
-+@%:@else
-+@%:@ include <assert.h>
-+@%:@endif
-+ Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether nonexistent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-+if test "${ac_cv_header_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+#include <stdarg.h>
-+#include <string.h>
-+#include <float.h>
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_header_stdc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_header_stdc=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <string.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "memchr" >/dev/null 2>&1; then
-+ :
-+else
-+ ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "free" >/dev/null 2>&1; then
-+ :
-+else
-+ ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-+ if test "$cross_compiling" = yes; then
-+ :
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ctype.h>
-+#include <stdlib.h>
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+ (('a' <= (c) && (c) <= 'i') \
-+ || ('j' <= (c) && (c) <= 'r') \
-+ || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-+
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+ int i;
-+ for (i = 0; i < 256; i++)
-+ if (XOR (islower (i), ISLOWER (i))
-+ || toupper (i) != TOUPPER (i))
-+ return 2;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-+if test $ac_cv_header_stdc = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define STDC_HEADERS 1
-+_ACEOF
-+
-+fi
-+
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+ inttypes.h stdint.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+
-+@%:@include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ eval "$as_ac_Header=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ eval "$as_ac_Header=no"
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+ { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+for ac_header in dlfcn.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+ { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+else
-+ # Is the header compilable?
-+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+@%:@include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_compiler=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6; }
-+
-+# Is the header present?
-+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <$ac_header>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6; }
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+ ( cat <<\_ASBOX
-+@%:@@%:@ -------------------------------- @%:@@%:@
-+@%:@@%:@ Report this to Hans_Boehm at hp.com @%:@@%:@
-+@%:@@%:@ -------------------------------- @%:@@%:@
-+_ASBOX
-+ ) | sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=\$ac_header_preproc"
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+ { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-+if test -z "$CXXCPP"; then
-+ if test "${ac_cv_prog_CXXCPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Double quotes because CXXCPP needs to be expanded
-+ for CXXCPP in "$CXX -E" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@ifdef __STDC__
-+@%:@ include <limits.h>
-+@%:@else
-+@%:@ include <assert.h>
-+@%:@endif
-+ Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether nonexistent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
-+fi
-+
-+ done
-+ ac_cv_prog_CXXCPP=$CXXCPP
-+
-+fi
-+ CXXCPP=$ac_cv_prog_CXXCPP
-+else
-+ ac_cv_prog_CXXCPP=$CXXCPP
-+fi
-+{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-+echo "${ECHO_T}$CXXCPP" >&6; }
-+ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@ifdef __STDC__
-+@%:@ include <limits.h>
-+@%:@else
-+@%:@ include <assert.h>
-+@%:@endif
-+ Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether nonexistent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+fi
-+
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$F77"; then
-+ ac_cv_prog_F77="$F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+F77=$ac_cv_prog_F77
-+if test -n "$F77"; then
-+ { echo "$as_me:$LINENO: result: $F77" >&5
-+echo "${ECHO_T}$F77" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$F77" && break
-+ done
-+fi
-+if test -z "$F77"; then
-+ ac_ct_F77=$F77
-+ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_F77"; then
-+ ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_F77="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_F77=$ac_cv_prog_ac_ct_F77
-+if test -n "$ac_ct_F77"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-+echo "${ECHO_T}$ac_ct_F77" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$ac_ct_F77" && break
-+done
-+
-+ if test "x$ac_ct_F77" = x; then
-+ F77=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ F77=$ac_ct_F77
-+ fi
-+fi
-+
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+rm -f a.out
-+
-+# If we don't use `.F' as extension, the preprocessor is not run on the
-+# input file. (Note that this only needs to work for GNU compilers.)
-+ac_save_ext=$ac_ext
-+ac_ext=F
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_f77_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
-+ac_ext=$ac_save_ext
-+ac_test_FFLAGS=${FFLAGS+set}
-+ac_save_FFLAGS=$FFLAGS
-+FFLAGS=
-+{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_f77_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ FFLAGS=-g
-+cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_f77_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_f77_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_prog_f77_g=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
-+if test "$ac_test_FFLAGS" = set; then
-+ FFLAGS=$ac_save_FFLAGS
-+elif test $ac_cv_prog_f77_g = yes; then
-+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+ FFLAGS="-g -O2"
-+ else
-+ FFLAGS="-g"
-+ fi
-+else
-+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+ FFLAGS="-O2"
-+ else
-+ FFLAGS=
-+ fi
-+fi
-+
-+G77=`test $ac_compiler_gnu = yes && echo yes`
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-+# find the maximum length of command line arguments
-+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ i=0
-+ teststring="ABCD"
-+
-+ case $build_os in
-+ msdosdjgpp*)
-+ # On DJGPP, this test can blow up pretty badly due to problems in libc
-+ # (any single argument exceeding 2000 bytes causes a buffer overrun
-+ # during glob expansion). Even if it were fixed, the result of this
-+ # check would be larger than it should be.
-+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
-+ ;;
-+
-+ gnu*)
-+ # Under GNU Hurd, this test is not required because there is
-+ # no limit to the length of command line arguments.
-+ # Libtool will interpret -1 as no limit whatsoever
-+ lt_cv_sys_max_cmd_len=-1;
-+ ;;
-+
-+ cygwin* | mingw*)
-+ # On Win9x/ME, this test blows up -- it succeeds, but takes
-+ # about 5 minutes as the teststring grows exponentially.
-+ # Worse, since 9x/ME are not pre-emptively multitasking,
-+ # you end up with a "frozen" computer, even though with patience
-+ # the test eventually succeeds (with a max line length of 256k).
-+ # Instead, let's just punt: use the minimum linelength reported by
-+ # all of the supported platforms: 8192 (on NT/2K/XP).
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ amigaos*)
-+ # On AmigaOS with pdksh, this test takes hours, literally.
-+ # So we just punt and use a minimum line length of 8192.
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-+ # This has been around since 386BSD, at least. Likely further.
-+ if test -x /sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-+ elif test -x /usr/sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-+ else
-+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
-+ fi
-+ # And add a safety zone
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+ ;;
-+
-+ interix*)
-+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
-+ lt_cv_sys_max_cmd_len=196608
-+ ;;
-+
-+ osf*)
-+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-+ # nice to cause kernel panics so lets avoid the loop below.
-+ # First set a reasonable default.
-+ lt_cv_sys_max_cmd_len=16384
-+ #
-+ if test -x /sbin/sysconfig; then
-+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
-+ esac
-+ fi
-+ ;;
-+ sco3.2v5*)
-+ lt_cv_sys_max_cmd_len=102400
-+ ;;
-+ sysv5* | sco5v6* | sysv4.2uw2*)
-+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-+ if test -n "$kargmax"; then
-+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
-+ else
-+ lt_cv_sys_max_cmd_len=32768
-+ fi
-+ ;;
-+ *)
-+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-+ if test -n "$lt_cv_sys_max_cmd_len"; then
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+ else
-+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-+ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-+ = "XX$teststring") >/dev/null 2>&1 &&
-+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
-+ lt_cv_sys_max_cmd_len=$new_result &&
-+ test $i != 17 # 1/2 MB should be enough
-+ do
-+ i=`expr $i + 1`
-+ teststring=$teststring$teststring
-+ done
-+ teststring=
-+ # Add a significant safety factor because C++ compilers can tack on massive
-+ # amounts of additional arguments before passing them to the linker.
-+ # It appears as though 1/2 is a usable value.
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+ fi
-+ ;;
-+ esac
-+
-+fi
-+
-+if test -n $lt_cv_sys_max_cmd_len ; then
-+ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: none" >&5
-+echo "${ECHO_T}none" >&6; }
-+fi
-+
-+
-+
-+
-+
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[BCDEGRST]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-+
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+
-+# Define system-specific variables.
-+case $host_os in
-+aix*)
-+ symcode='[BCDT]'
-+ ;;
-+cygwin* | mingw* | pw32*)
-+ symcode='[ABCDGISTW]'
-+ ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+ if test "$host_cpu" = ia64; then
-+ symcode='[ABCDEGRST]'
-+ fi
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ ;;
-+linux* | k*bsd*-gnu)
-+ if test "$host_cpu" = ia64; then
-+ symcode='[ABCDGIRSTW]'
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ fi
-+ ;;
-+irix* | nonstopux*)
-+ symcode='[BCDEGRST]'
-+ ;;
-+osf*)
-+ symcode='[BCDEGQRST]'
-+ ;;
-+solaris*)
-+ symcode='[BDRT]'
-+ ;;
-+sco3.2v5*)
-+ symcode='[DT]'
-+ ;;
-+sysv4.2uw2*)
-+ symcode='[DT]'
-+ ;;
-+sysv5* | sco5v6* | unixware* | OpenUNIX*)
-+ symcode='[ABDT]'
-+ ;;
-+sysv4)
-+ symcode='[DFNSTU]'
-+ ;;
-+esac
-+
-+# Handle CRLF in mingw tool chain
-+opt_cr=
-+case $build_os in
-+mingw*)
-+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-+ ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+case `$NM -V 2>&1` in
-+*GNU* | *'with BFD'*)
-+ symcode='[ABCDGIRSTW]' ;;
-+esac
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-+ symxfrm="\\1 $ac_symprfx\\2 \\2"
-+
-+ # Write the raw and C identifiers.
-+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-+
-+ # Check to see that the pipe works correctly.
-+ pipe_works=no
-+
-+ rm -f conftest*
-+ cat > conftest.$ac_ext <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+int main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Now try to grab the symbols.
-+ nlist=conftest.nm
-+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s "$nlist"; then
-+ # Try sorting and uniquifying the output.
-+ if sort "$nlist" | uniq > "$nlist"T; then
-+ mv -f "$nlist"T "$nlist"
-+ else
-+ rm -f "$nlist"T
-+ fi
-+
-+ # Make sure that we snagged all the symbols we need.
-+ if grep ' nm_test_var$' "$nlist" >/dev/null; then
-+ if grep ' nm_test_func$' "$nlist" >/dev/null; then
-+ cat <<EOF > conftest.$ac_ext
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+ # Now generate the symbol file.
-+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-+
-+ cat <<EOF >> conftest.$ac_ext
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+ const char *name;
-+ lt_ptr_t address;
-+}
-+lt_preloaded_symbols[] =
-+{
-+EOF
-+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-+ cat <<\EOF >> conftest.$ac_ext
-+ {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+ # Now try linking the two files.
-+ mv conftest.$ac_objext conftstm.$ac_objext
-+ lt_save_LIBS="$LIBS"
-+ lt_save_CFLAGS="$CFLAGS"
-+ LIBS="conftstm.$ac_objext"
-+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext}; then
-+ pipe_works=yes
-+ fi
-+ LIBS="$lt_save_LIBS"
-+ CFLAGS="$lt_save_CFLAGS"
-+ else
-+ echo "cannot find nm_test_func in $nlist" >&5
-+ fi
-+ else
-+ echo "cannot find nm_test_var in $nlist" >&5
-+ fi
-+ else
-+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-+ fi
-+ else
-+ echo "$progname: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ fi
-+ rm -rf conftest* conftst*
-+
-+ # Do not use the global_symbol_pipe unless it works.
-+ if test "$pipe_works" = yes; then
-+ break
-+ else
-+ lt_cv_sys_global_symbol_pipe=
-+ fi
-+done
-+
-+fi
-+
-+if test -z "$lt_cv_sys_global_symbol_pipe"; then
-+ lt_cv_sys_global_symbol_to_cdecl=
-+fi
-+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-+ { echo "$as_me:$LINENO: result: failed" >&5
-+echo "${ECHO_T}failed" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: ok" >&5
-+echo "${ECHO_T}ok" >&6; }
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for objdir" >&5
-+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-+if test "${lt_cv_objdir+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+ lt_cv_objdir=.libs
-+else
-+ # MS-DOS does not allow filenames that begin with a dot.
-+ lt_cv_objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-+echo "${ECHO_T}$lt_cv_objdir" >&6; }
-+objdir=$lt_cv_objdir
-+
-+
-+
-+
-+
-+case $host_os in
-+aix3*)
-+ # AIX sometimes has problems with the GCC collect2 program. For some
-+ # reason, if we set the COLLECT_NAMES environment variable, the problems
-+ # vanish in a puff of smoke.
-+ if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+ fi
-+ ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting. It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-+
-+# Same as above, but do not quote variable references.
-+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# Sed substitution to avoid accidental globbing in evaled expressions
-+no_glob_subst='s/\*/\\\*/g'
-+
-+# Constants:
-+rm="rm -f"
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+
-+# All known linkers require a `.a' archive for static linking (except MSVC,
-+# which needs '.lib').
-+libext=a
-+ltmain="$ac_aux_dir/ltmain.sh"
-+ofile="$default_ofile"
-+with_gnu_ld="$lt_cv_prog_gnu_ld"
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$AR"; then
-+ ac_cv_prog_AR="$AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AR=$ac_cv_prog_AR
-+if test -n "$AR"; then
-+ { echo "$as_me:$LINENO: result: $AR" >&5
-+echo "${ECHO_T}$AR" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_AR"; then
-+ ac_ct_AR=$AR
-+ # Extract the first word of "ar", so it can be a program name with args.
-+set dummy ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_AR"; then
-+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_AR="ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_AR=$ac_cv_prog_ac_ct_AR
-+if test -n "$ac_ct_AR"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-+echo "${ECHO_T}$ac_ct_AR" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_AR" = x; then
-+ AR="false"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ AR=$ac_ct_AR
-+ fi
-+else
-+ AR="$ac_cv_prog_AR"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$RANLIB"; then
-+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+RANLIB=$ac_cv_prog_RANLIB
-+if test -n "$RANLIB"; then
-+ { echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_RANLIB"; then
-+ ac_ct_RANLIB=$RANLIB
-+ # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_RANLIB"; then
-+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_RANLIB="ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_RANLIB" = x; then
-+ RANLIB=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ RANLIB=$ac_ct_RANLIB
-+ fi
-+else
-+ RANLIB="$ac_cv_prog_RANLIB"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$STRIP"; then
-+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+ { echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+ ac_ct_STRIP=$STRIP
-+ # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_STRIP"; then
-+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_STRIP="strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_STRIP" = x; then
-+ STRIP=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ STRIP=$ac_ct_STRIP
-+ fi
-+else
-+ STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+
-+# Set sane defaults for various variables
-+test -z "$AR" && AR=ar
-+test -z "$AR_FLAGS" && AR_FLAGS=cru
-+test -z "$AS" && AS=as
-+test -z "$CC" && CC=cc
-+test -z "$LTCC" && LTCC=$CC
-+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$LD" && LD=ld
-+test -z "$LN_S" && LN_S="ln -s"
-+test -z "$MAGIC_CMD" && MAGIC_CMD=file
-+test -z "$NM" && NM=nm
-+test -z "$SED" && SED=sed
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$RANLIB" && RANLIB=:
-+test -z "$STRIP" && STRIP=:
-+test -z "$ac_objext" && ac_objext=o
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+if test -n "$RANLIB"; then
-+ case $host_os in
-+ openbsd*)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-+ ;;
-+ *)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-+ ;;
-+ esac
-+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+fi
-+
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $MAGIC_CMD in
-+[\\/*] | ?:[\\/]*)
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/${ac_tool_prefix}file; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool at gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+if test -z "$lt_cv_path_MAGIC_CMD"; then
-+ if test -n "$ac_tool_prefix"; then
-+ { echo "$as_me:$LINENO: checking for file" >&5
-+echo $ECHO_N "checking for file... $ECHO_C" >&6; }
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $MAGIC_CMD in
-+[\\/*] | ?:[\\/]*)
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/file; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool at gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ else
-+ MAGIC_CMD=:
-+ fi
-+fi
-+
-+ fi
-+ ;;
-+esac
-+
-+
-+ case $host_os in
-+ rhapsody* | darwin*)
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$DSYMUTIL"; then
-+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+DSYMUTIL=$ac_cv_prog_DSYMUTIL
-+if test -n "$DSYMUTIL"; then
-+ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-+echo "${ECHO_T}$DSYMUTIL" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_DSYMUTIL"; then
-+ ac_ct_DSYMUTIL=$DSYMUTIL
-+ # Extract the first word of "dsymutil", so it can be a program name with args.
-+set dummy dsymutil; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_DSYMUTIL"; then
-+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-+if test -n "$ac_ct_DSYMUTIL"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-+echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_DSYMUTIL" = x; then
-+ DSYMUTIL=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ DSYMUTIL=$ac_ct_DSYMUTIL
-+ fi
-+else
-+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-+fi
-+
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_NMEDIT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$NMEDIT"; then
-+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+NMEDIT=$ac_cv_prog_NMEDIT
-+if test -n "$NMEDIT"; then
-+ { echo "$as_me:$LINENO: result: $NMEDIT" >&5
-+echo "${ECHO_T}$NMEDIT" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_NMEDIT"; then
-+ ac_ct_NMEDIT=$NMEDIT
-+ # Extract the first word of "nmedit", so it can be a program name with args.
-+set dummy nmedit; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_NMEDIT"; then
-+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-+if test -n "$ac_ct_NMEDIT"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-+echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_NMEDIT" = x; then
-+ NMEDIT=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ NMEDIT=$ac_ct_NMEDIT
-+ fi
-+else
-+ NMEDIT="$ac_cv_prog_NMEDIT"
-+fi
-+
-+
-+ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-+echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
-+if test "${lt_cv_apple_cc_single_mod+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_apple_cc_single_mod=no
-+ if test -z "${LT_MULTI_MODULE}"; then
-+ # By default we will add the -single_module flag. You can override
-+ # by either setting the environment variable LT_MULTI_MODULE
-+ # non-empty at configure time, or by adding -multi_module to the
-+ # link flags.
-+ echo "int foo(void){return 1;}" > conftest.c
-+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-+ -dynamiclib ${wl}-single_module conftest.c
-+ if test -f libconftest.dylib; then
-+ lt_cv_apple_cc_single_mod=yes
-+ rm -rf libconftest.dylib*
-+ fi
-+ rm conftest.c
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-+echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
-+ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-+echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
-+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_ld_exported_symbols_list=no
-+ save_LDFLAGS=$LDFLAGS
-+ echo "_main" > conftest.sym
-+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ lt_cv_ld_exported_symbols_list=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ lt_cv_ld_exported_symbols_list=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-+echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
-+ case $host_os in
-+ rhapsody* | darwin1.[0123])
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-+ darwin1.*)
-+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-+ darwin*)
-+ # if running on 10.5 or later, the deployment target defaults
-+ # to the OS version, if on x86, and 10.4, the deployment
-+ # target defaults to 10.4. Don't you love it?
-+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-+ 10.[012]*)
-+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-+ 10.*)
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-+ esac
-+ ;;
-+ esac
-+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-+ _lt_dar_single_mod='$single_module'
-+ fi
-+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-+ else
-+ _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
-+ fi
-+ if test "$DSYMUTIL" != ":"; then
-+ _lt_dsymutil="~$DSYMUTIL \$lib || :"
-+ else
-+ _lt_dsymutil=
-+ fi
-+ ;;
-+ esac
-+
-+
-+enable_dlopen=no
-+enable_win32_dll=no
-+
-+# Check whether --enable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+ enableval=$enable_libtool_lock;
-+fi
-+
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+
-+# Check whether --with-pic was given.
-+if test "${with_pic+set}" = set; then
-+ withval=$with_pic; pic_mode="$withval"
-+else
-+ pic_mode=default
-+fi
-+
-+test -z "$pic_mode" && pic_mode=default
-+
-+# Use C for the default configuration in the libtool script
-+tagname=
-+lt_save_CC="$CC"
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+# Source file extension for C test sources.
-+ac_ext=c
-+
-+# Object file extension for compiled C test sources.
-+objext=o
-+objext=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(){return(0);}'
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+
-+lt_prog_compiler_no_builtin_flag=
-+
-+if test "$GCC" = yes; then
-+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_rtti_exceptions=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="-fno-rtti -fno-exceptions"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_rtti_exceptions=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-+else
-+ :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl=
-+lt_prog_compiler_pic=
-+lt_prog_compiler_static=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_static='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+ lt_prog_compiler_pic='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic='-fno-common'
-+ ;;
-+
-+ interix[3-9]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static='-Bstatic'
-+ else
-+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic='-qnocommon'
-+ lt_prog_compiler_wl='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-fpic'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C 5.9
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ lt_prog_compiler_wl='-Wl,'
-+ ;;
-+ *Sun\ F*)
-+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ lt_prog_compiler_wl=''
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+
-+ rdos*)
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl='-Qoption ld '
-+ lt_prog_compiler_pic='-PIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic='-Kconform_pic'
-+ lt_prog_compiler_static='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_can_build_shared=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic='-pic'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_pic_works=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_pic_works=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
-+ case $lt_prog_compiler_pic in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic=
-+ lt_prog_compiler_can_build_shared=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_static_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_static_works=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_static_works=yes
-+ fi
-+ else
-+ lt_cv_prog_compiler_static_works=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+ runpath_var=
-+ allow_undefined_flag=
-+ enable_shared_with_static_runtimes=no
-+ archive_cmds=
-+ archive_expsym_cmds=
-+ old_archive_From_new_cmds=
-+ old_archive_from_expsyms_cmds=
-+ export_dynamic_flag_spec=
-+ whole_archive_flag_spec=
-+ thread_safe_flag_spec=
-+ hardcode_libdir_flag_spec=
-+ hardcode_libdir_flag_spec_ld=
-+ hardcode_libdir_separator=
-+ hardcode_direct=no
-+ hardcode_minus_L=no
-+ hardcode_shlibpath_var=unsupported
-+ link_all_deplibs=unknown
-+ hardcode_automatic=no
-+ module_cmds=
-+ module_expsym_cmds=
-+ always_export_symbols=no
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ # Exclude shared library initialization/finalization symbols.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix[3-9]*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+
-+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=no
-+ enable_shared_with_static_runtimes=yes
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ interix[3-9]*)
-+ hardcode_direct=no
-+ hardcode_shlibpath_var=no
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ gnu* | linux* | k*bsd*-gnu)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*) # Sun C 5.9
-+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_sharedflag='-G' ;;
-+ *Sun\ F*) # Sun Fortran 8.3
-+ tmp_sharedflag='-G' ;;
-+ *)
-+ tmp_sharedflag='-shared' ;;
-+ esac
-+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs=no
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec=
-+ export_dynamic_flag_spec=
-+ whole_archive_flag_spec=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=yes
-+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct=unsupported
-+ fi
-+ ;;
-+
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds=''
-+ hardcode_direct=yes
-+ hardcode_libdir_separator=':'
-+ link_all_deplibs=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L=yes
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_libdir_separator=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag="-z nodefs"
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag=' ${wl}-bernotok'
-+ allow_undefined_flag=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec='$convenience'
-+ archive_cmds_need_lc=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc=no
-+ hardcode_direct=no
-+ hardcode_automatic=yes
-+ hardcode_shlibpath_var=unsupported
-+ whole_archive_flag_spec=''
-+ link_all_deplibs=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_direct=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+
-+ hardcode_direct=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld='+b $libdir'
-+ hardcode_direct=no
-+ hardcode_shlibpath_var=no
-+ ;;
-+ *)
-+ hardcode_direct=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ link_all_deplibs=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ allow_undefined_flag=unsupported
-+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag=' -expect_unresolved \*'
-+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag=' -expect_unresolved \*'
-+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_shlibpath_var=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'. GCC discards it without `$wl',
-+ # but is careful enough not to reorder.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ if test "$GCC" = yes; then
-+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ else
-+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-+ fi
-+ ;;
-+ esac
-+ link_all_deplibs=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds='$CC -r -o $output$reload_objs'
-+ hardcode_direct=no
-+ ;;
-+ motorola)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var=no
-+ export_dynamic_flag_spec='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag='${wl}-z,text'
-+ archive_cmds_need_lc=no
-+ hardcode_shlibpath_var=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag='${wl}-z,text'
-+ allow_undefined_flag='${wl}-z,nodefs'
-+ archive_cmds_need_lc=no
-+ hardcode_shlibpath_var=no
-+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator=':'
-+ link_all_deplibs=yes
-+ export_dynamic_flag_spec='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-+echo "${ECHO_T}$ld_shlibs" >&6; }
-+test "$ld_shlibs" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl
-+ pic_flag=$lt_prog_compiler_pic
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag
-+ allow_undefined_flag=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc=no
-+ else
-+ archive_cmds_need_lc=yes
-+ fi
-+ allow_undefined_flag=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+if test "$GCC" = yes; then
-+ case $host_os in
-+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-+ *) lt_awk_arg="/^libraries:/" ;;
-+ esac
-+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # Ok, now we have the path, separated by spaces, we can step through it
-+ # and add multilib dir if necessary.
-+ lt_tmp_lt_search_path_spec=
-+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-+ for lt_sys_path in $lt_search_path_spec; do
-+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-+ else
-+ test -d "$lt_sys_path" && \
-+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-+ fi
-+ done
-+ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-+BEGIN {RS=" "; FS="/|\n";} {
-+ lt_foo="";
-+ lt_count=0;
-+ for (lt_i = NF; lt_i > 0; lt_i--) {
-+ if ($lt_i != "" && $lt_i != ".") {
-+ if ($lt_i == "..") {
-+ lt_count++;
-+ } else {
-+ if (lt_count == 0) {
-+ lt_foo="/" $lt_i lt_foo;
-+ } else {
-+ lt_count--;
-+ }
-+ }
-+ }
-+ }
-+ if (lt_foo != "") { lt_freq[lt_foo]++; }
-+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
-+}'`
-+ sys_lib_search_path_spec=`echo $lt_search_path_spec`
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[4-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[3-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-+fi
-+
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-+fi
-+
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action=
-+if test -n "$hardcode_libdir_flag_spec" || \
-+ test -n "$runpath_var" || \
-+ test "X$hardcode_automatic" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-+ test "$hardcode_minus_L" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-+echo "${ECHO_T}$hardcode_action" >&6; }
-+
-+if test "$hardcode_action" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+striplib=
-+old_striplib=
-+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+else
-+# FIXME - insert some real tests, host_os isn't really good enough
-+ case $host_os in
-+ darwin*)
-+ if test -n "$STRIP" ; then
-+ striplib="$STRIP -x"
-+ old_striplib="$STRIP -S"
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+ else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+ ;;
-+ *)
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+ ;;
-+ esac
-+fi
-+
-+if test "x$enable_dlopen" != xyes; then
-+ enable_dlopen=unknown
-+ enable_dlopen_self=unknown
-+ enable_dlopen_self_static=unknown
-+else
-+ lt_cv_dlopen=no
-+ lt_cv_dlopen_libs=
-+
-+ case $host_os in
-+ beos*)
-+ lt_cv_dlopen="load_add_on"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ;;
-+
-+ mingw* | pw32*)
-+ lt_cv_dlopen="LoadLibrary"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ cygwin*)
-+ lt_cv_dlopen="dlopen"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ darwin*)
-+ # if libdl is installed we need to link against it
-+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+
-+ lt_cv_dlopen="dyld"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+
-+fi
-+
-+ ;;
-+
-+ *)
-+ { echo "$as_me:$LINENO: checking for shl_load" >&5
-+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
-+if test "${ac_cv_func_shl_load+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define shl_load innocuous_shl_load
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char shl_load (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef shl_load
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char shl_load ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined __stub_shl_load || defined __stub___shl_load
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return shl_load ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_func_shl_load=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_func_shl_load=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-+if test $ac_cv_func_shl_load = yes; then
-+ lt_cv_dlopen="shl_load"
-+else
-+ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char shl_load ();
-+int
-+main ()
-+{
-+return shl_load ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dld_shl_load=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dld_shl_load=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-+if test $ac_cv_lib_dld_shl_load = yes; then
-+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-+else
-+ { echo "$as_me:$LINENO: checking for dlopen" >&5
-+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
-+if test "${ac_cv_func_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define dlopen innocuous_dlopen
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char dlopen (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef dlopen
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined __stub_dlopen || defined __stub___dlopen
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_func_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_func_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-+if test $ac_cv_func_dlopen = yes; then
-+ lt_cv_dlopen="dlopen"
-+else
-+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lsvld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_svld_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_svld_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-+if test $ac_cv_lib_svld_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-+else
-+ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dld_link ();
-+int
-+main ()
-+{
-+return dld_link ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dld_dld_link=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dld_dld_link=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-+if test $ac_cv_lib_dld_dld_link = yes; then
-+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+ ;;
-+ esac
-+
-+ if test "x$lt_cv_dlopen" != xno; then
-+ enable_dlopen=yes
-+ else
-+ enable_dlopen=no
-+ fi
-+
-+ case $lt_cv_dlopen in
-+ dlopen)
-+ save_CPPFLAGS="$CPPFLAGS"
-+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+
-+ save_LDFLAGS="$LDFLAGS"
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+
-+ save_LIBS="$LIBS"
-+ LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
-+if test "${lt_cv_dlopen_self+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$cross_compiling" = yes; then :
-+ lt_cv_dlopen_self=cross
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+#line __oline__ "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+ else
-+ puts (dlerror ());
-+
-+ exit (status);
-+}
-+EOF
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) >&5 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-+ esac
-+ else :
-+ # compilation failed
-+ lt_cv_dlopen_self=no
-+ fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
-+
-+ if test "x$lt_cv_dlopen_self" = xyes; then
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-+ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
-+if test "${lt_cv_dlopen_self_static+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$cross_compiling" = yes; then :
-+ lt_cv_dlopen_self_static=cross
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+#line __oline__ "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+ else
-+ puts (dlerror ());
-+
-+ exit (status);
-+}
-+EOF
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) >&5 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-+ esac
-+ else :
-+ # compilation failed
-+ lt_cv_dlopen_self_static=no
-+ fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
-+ fi
-+
-+ CPPFLAGS="$save_CPPFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+ LIBS="$save_LIBS"
-+ ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self in
-+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+ *) enable_dlopen_self=unknown ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self_static in
-+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+ *) enable_dlopen_self_static=unknown ;;
-+ esac
-+fi
-+
-+
-+# Report which library types will actually be built
-+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+
-+aix[4-9]*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+{ echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6; }
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler \
-+ CC \
-+ LD \
-+ lt_prog_compiler_wl \
-+ lt_prog_compiler_pic \
-+ lt_prog_compiler_static \
-+ lt_prog_compiler_no_builtin_flag \
-+ export_dynamic_flag_spec \
-+ thread_safe_flag_spec \
-+ whole_archive_flag_spec \
-+ enable_shared_with_static_runtimes \
-+ old_archive_cmds \
-+ old_archive_from_new_cmds \
-+ predep_objects \
-+ postdep_objects \
-+ predeps \
-+ postdeps \
-+ compiler_lib_search_path \
-+ compiler_lib_search_dirs \
-+ archive_cmds \
-+ archive_expsym_cmds \
-+ postinstall_cmds \
-+ postuninstall_cmds \
-+ old_archive_from_expsyms_cmds \
-+ allow_undefined_flag \
-+ no_undefined_flag \
-+ export_symbols_cmds \
-+ hardcode_libdir_flag_spec \
-+ hardcode_libdir_flag_spec_ld \
-+ hardcode_libdir_separator \
-+ hardcode_automatic \
-+ module_cmds \
-+ module_expsym_cmds \
-+ lt_cv_prog_compiler_c_o \
-+ fix_srcfile_path \
-+ exclude_expsyms \
-+ include_expsyms; do
-+
-+ case $var in
-+ old_archive_cmds | \
-+ old_archive_from_new_cmds | \
-+ archive_cmds | \
-+ archive_expsym_cmds | \
-+ module_cmds | \
-+ module_expsym_cmds | \
-+ old_archive_from_expsyms_cmds | \
-+ export_symbols_cmds | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="${ofile}T"
-+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+ $rm -f "$cfgfile"
-+ { echo "$as_me:$LINENO: creating $ofile" >&5
-+echo "$as_me: creating $ofile" >&6;}
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+#! $SHELL
-+
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-+# Free Software Foundation, Inc.
-+#
-+# This file is part of GNU Libtool:
-+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A sed program that does not truncate output.
-+SED=$lt_SED
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="$SED -e 1s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+# The names of the tagged configurations supported by this script.
-+available_tags=
-+
-+# ### BEGIN LIBTOOL CONFIG
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds
-+archive_expsym_cmds=$lt_archive_expsym_cmds
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds
-+module_expsym_cmds=$lt_module_expsym_cmds
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms
-+
-+# ### END LIBTOOL CONFIG
-+
-+__EOF__
-+
-+
-+ case $host_os in
-+ aix3*)
-+ cat <<\EOF >> "$cfgfile"
-+
-+# AIX sometimes has problems with the GCC collect2 program. For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+fi
-+EOF
-+ ;;
-+ esac
-+
-+ # We use sed instead of cat because bash on DJGPP gets confused if
-+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
-+ # text mode, it properly converts lines to CR/LF. This bash problem
-+ # is reportedly fixed, but why not run on old versions too?
-+ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-+
-+ mv -f "$cfgfile" "$ofile" || \
-+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+ chmod +x "$ofile"
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+
-+# Check whether --with-tags was given.
-+if test "${with_tags+set}" = set; then
-+ withval=$with_tags; tagnames="$withval"
-+fi
-+
-+
-+if test -f "$ltmain" && test -n "$tagnames"; then
-+ if test ! -f "${ofile}"; then
-+ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-+ fi
-+
-+ if test -z "$LTCC"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-+ if test -z "$LTCC"; then
-+ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-+ else
-+ { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-+echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-+ fi
-+ fi
-+ if test -z "$LTCFLAGS"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-+ fi
-+
-+ # Extract list of available tagged configurations in $ofile.
-+ # Note that this assumes the entire list is on one line.
-+ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-+
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for tagname in $tagnames; do
-+ IFS="$lt_save_ifs"
-+ # Check whether tagname contains only valid characters
-+ case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-+ "") ;;
-+ *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-+echo "$as_me: error: invalid tag name: $tagname" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+
-+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-+ then
-+ { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-+echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+
-+ # Update the list of available tags.
-+ if test -n "$tagname"; then
-+ echo appending configuration tag \"$tagname\" to $ofile
-+
-+ case $tagname in
-+ CXX)
-+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+
-+
-+
-+archive_cmds_need_lc_CXX=no
-+allow_undefined_flag_CXX=
-+always_export_symbols_CXX=no
-+archive_expsym_cmds_CXX=
-+export_dynamic_flag_spec_CXX=
-+hardcode_direct_CXX=no
-+hardcode_libdir_flag_spec_CXX=
-+hardcode_libdir_flag_spec_ld_CXX=
-+hardcode_libdir_separator_CXX=
-+hardcode_minus_L_CXX=no
-+hardcode_shlibpath_var_CXX=unsupported
-+hardcode_automatic_CXX=no
-+module_cmds_CXX=
-+module_expsym_cmds_CXX=
-+link_all_deplibs_CXX=unknown
-+old_archive_cmds_CXX=$old_archive_cmds
-+no_undefined_flag_CXX=
-+whole_archive_flag_spec_CXX=
-+enable_shared_with_static_runtimes_CXX=no
-+
-+# Dependencies to place before and after the object being linked:
-+predep_objects_CXX=
-+postdep_objects_CXX=
-+predeps_CXX=
-+postdeps_CXX=
-+compiler_lib_search_path_CXX=
-+compiler_lib_search_dirs_CXX=
-+
-+# Source file extension for C++ test sources.
-+ac_ext=cpp
-+
-+# Object file extension for compiled C++ test sources.
-+objext=o
-+objext_CXX=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC=$CC
-+lt_save_LD=$LD
-+lt_save_GCC=$GCC
-+GCC=$GXX
-+lt_save_with_gnu_ld=$with_gnu_ld
-+lt_save_path_LD=$lt_cv_path_LD
-+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-+else
-+ $as_unset lt_cv_prog_gnu_ld
-+fi
-+if test -n "${lt_cv_path_LDCXX+set}"; then
-+ lt_cv_path_LD=$lt_cv_path_LDCXX
-+else
-+ $as_unset lt_cv_path_LD
-+fi
-+test -z "${LDCXX+set}" || LD=$LDCXX
-+CC=${CXX-"c++"}
-+compiler=$CC
-+compiler_CXX=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# We don't want -fno-exception wen compiling C++ code, so set the
-+# no_builtin_flag separately
-+if test "$GXX" = yes; then
-+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-+else
-+ lt_prog_compiler_no_builtin_flag_CXX=
-+fi
-+
-+if test "$GXX" = yes; then
-+ # Set up default GNU C++ configuration
-+
-+
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-+else
-+ with_gnu_ld=no
-+fi
-+
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [\\/]* | ?:[\\/]*)
-+ re_direlt='/[^/][^/]*/\.\./'
-+ # Canonicalize the pathname of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ { echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-+else
-+ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$LD"; then
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some variants of GNU ld only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break
-+ ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+else
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+ { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+ { (exit 1); exit 1; }; }
-+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+
-+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
-+ # archiving commands below assume that GNU ld is being used.
-+ if test "$with_gnu_ld" = yes; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-+ # investigate it a little bit more. (MM)
-+ wlarc='${wl}'
-+
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-+ grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_CXX=
-+ fi
-+ else
-+ with_gnu_ld=no
-+ wlarc=
-+
-+ # A generic and very simple default shared library creation
-+ # command for GNU C++ for the case where it uses the native
-+ # linker, instead of GNU ld. If possible, this setting should
-+ # overridden to take advantage of the native linker features on
-+ # the platform it is being used on.
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ fi
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+else
-+ GXX=no
-+ with_gnu_ld=no
-+ wlarc=
-+fi
-+
-+# PORTME: fill in a description of your system's C++ link characteristics
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+ld_shlibs_CXX=yes
-+case $host_os in
-+ aix3*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ case $ld_flag in
-+ *-brtl*)
-+ aix_use_runtimelinking=yes
-+ break
-+ ;;
-+ esac
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_CXX=''
-+ hardcode_direct_CXX=yes
-+ hardcode_libdir_separator_CXX=':'
-+ link_all_deplibs_CXX=yes
-+
-+ if test "$GXX" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct_CXX=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_CXX=yes
-+ hardcode_libdir_flag_spec_CXX='-L$libdir'
-+ hardcode_libdir_separator_CXX=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_CXX=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_CXX='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+
-+ archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_CXX="-z nodefs"
-+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_CXX=' ${wl}-bernotok'
-+ allow_undefined_flag_CXX=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_CXX='$convenience'
-+ archive_cmds_need_lc_CXX=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_CXX=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+
-+ chorus*)
-+ case $cc_basename in
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_CXX='-L$libdir'
-+ allow_undefined_flag_CXX=unsupported
-+ always_export_symbols_CXX=no
-+ enable_shared_with_static_runtimes_CXX=yes
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ darwin* | rhapsody*)
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_direct_CXX=no
-+ hardcode_automatic_CXX=yes
-+ hardcode_shlibpath_var_CXX=unsupported
-+ whole_archive_flag_spec_CXX=''
-+ link_all_deplibs_CXX=yes
-+ allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
-+ if test "$GXX" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-+ fi
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ freebsd[12]*)
-+ # C++ shared libraries reported to be fairly broken before switch to ELF
-+ ld_shlibs_CXX=no
-+ ;;
-+ freebsd-elf*)
-+ archive_cmds_need_lc_CXX=no
-+ ;;
-+ freebsd* | dragonfly*)
-+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-+ # conventions
-+ ld_shlibs_CXX=yes
-+ ;;
-+ gnu*)
-+ ;;
-+ hpux9*)
-+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ hardcode_direct_CXX=yes
-+ hardcode_minus_L_CXX=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aCC*)
-+ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ hpux10*|hpux11*)
-+ if test $with_gnu_ld = no; then
-+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*) ;;
-+ *)
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ ;;
-+ esac
-+ fi
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_direct_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ ;;
-+ *)
-+ hardcode_direct_CXX=yes
-+ hardcode_minus_L_CXX=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+ ;;
-+ esac
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aCC*)
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test $with_gnu_ld = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ interix[3-9]*)
-+ hardcode_direct_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+ irix5* | irix6*)
-+ case $cc_basename in
-+ CC*)
-+ # SGI C++
-+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test "$with_gnu_ld" = no; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-+ fi
-+ fi
-+ link_all_deplibs_CXX=yes
-+ ;;
-+ esac
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+ ;;
-+ icpc*)
-+ # Intel C++
-+ with_gnu_ld=yes
-+ # version 8.0 and above of icpc choke on multiply defined symbols
-+ # if we add $predep_objects and $postdep_objects, however 7.1 and
-+ # earlier do not add the objects themselves.
-+ case `$CC -V 2>&1` in
-+ *"Version 7."*)
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ *) # Version 8.0 or newer
-+ tmp_idyn=
-+ case $host_cpu in
-+ ia64*) tmp_idyn=' -i_dynamic';;
-+ esac
-+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ esac
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-+ ;;
-+ pgCC* | pgcpp*)
-+ # Portland Group C++ compiler
-+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-+
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ no_undefined_flag_CXX=' -zdefs'
-+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-+ hardcode_libdir_flag_spec_CXX='-R$libdir'
-+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+
-+ # Not sure whether something based on
-+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-+ # would be better.
-+ output_verbose_link_cmd='echo'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ m88k*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-+ wlarc=
-+ hardcode_libdir_flag_spec_CXX='-R$libdir'
-+ hardcode_direct_CXX=yes
-+ hardcode_shlibpath_var_CXX=no
-+ fi
-+ # Workaround some broken pre-1.5 toolchains
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-+ ;;
-+ openbsd2*)
-+ # C++ shared libraries are fairly broken
-+ ld_shlibs_CXX=no
-+ ;;
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct_CXX=yes
-+ hardcode_shlibpath_var_CXX=no
-+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ fi
-+ output_verbose_link_cmd='echo'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ osf3*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ cxx*)
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Archives containing C++ object files must be created using
-+ # the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ cxx*)
-+ allow_undefined_flag_CXX=' -expect_unresolved \*'
-+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-+ echo "-hidden">> $lib.exp~
-+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-+ $rm $lib.exp'
-+
-+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ lcc*)
-+ # Lucid
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ archive_cmds_need_lc_CXX=yes
-+ no_undefined_flag_CXX=' -zdefs'
-+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ hardcode_libdir_flag_spec_CXX='-R$libdir'
-+ hardcode_shlibpath_var_CXX=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
-+ ;;
-+ esac
-+ link_all_deplibs_CXX=yes
-+
-+ output_verbose_link_cmd='echo'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+
-+ # The C++ compiler must be used to create the archive.
-+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ # GNU C++ compiler with Solaris linker
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-+ if $CC --version | grep -v '^2\.7' > /dev/null; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ else
-+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
-+ # platform.
-+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag_CXX='${wl}-z,text'
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ # For security reasons, it is highly recommended that you always
-+ # use absolute paths for naming shared libraries, and exclude the
-+ # DT_RUNPATH tag from executables and libraries. But doing so
-+ # requires that you compile everything twice, which is a pain.
-+ # So that behaviour is only enabled if SCOABSPATH is set to a
-+ # non-empty value in the environment. Most likely only useful for
-+ # creating official distributions of packages.
-+ # This is a hack until libtool officially supports absolute path
-+ # names for shared libraries.
-+ no_undefined_flag_CXX='${wl}-z,text'
-+ allow_undefined_flag_CXX='${wl}-z,nodefs'
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_CXX=':'
-+ link_all_deplibs_CXX=yes
-+ export_dynamic_flag_spec_CXX='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+GCC_CXX="$GXX"
-+LD_CXX="$LD"
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+cat > conftest.$ac_ext <<EOF
-+class Foo
-+{
-+public:
-+ Foo (void) { a = 0; }
-+private:
-+ int a;
-+};
-+EOF
-+
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Parse the compiler output and extract the necessary
-+ # objects, libraries and library flags.
-+
-+ # Sentinel used to keep track of whether or not we are before
-+ # the conftest object file.
-+ pre_test_object_deps_done=no
-+
-+ # The `*' in the case matches for architectures that use `case' in
-+ # $output_verbose_cmd can trigger glob expansion during the loop
-+ # eval without this substitution.
-+ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-+
-+ for p in `eval $output_verbose_link_cmd`; do
-+ case $p in
-+
-+ -L* | -R* | -l*)
-+ # Some compilers place space between "-{L,R}" and the path.
-+ # Remove the space.
-+ if test $p = "-L" \
-+ || test $p = "-R"; then
-+ prev=$p
-+ continue
-+ else
-+ prev=
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ case $p in
-+ -L* | -R*)
-+ # Internal compiler library paths should come after those
-+ # provided the user. The postdeps already come after the
-+ # user supplied libs so there is no need to process them.
-+ if test -z "$compiler_lib_search_path_CXX"; then
-+ compiler_lib_search_path_CXX="${prev}${p}"
-+ else
-+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-+ fi
-+ ;;
-+ # The "-l" case would never come before the object being
-+ # linked, so don't bother handling this case.
-+ esac
-+ else
-+ if test -z "$postdeps_CXX"; then
-+ postdeps_CXX="${prev}${p}"
-+ else
-+ postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-+ fi
-+ fi
-+ ;;
-+
-+ *.$objext)
-+ # This assumes that the test object file only shows up
-+ # once in the compiler output.
-+ if test "$p" = "conftest.$objext"; then
-+ pre_test_object_deps_done=yes
-+ continue
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ if test -z "$predep_objects_CXX"; then
-+ predep_objects_CXX="$p"
-+ else
-+ predep_objects_CXX="$predep_objects_CXX $p"
-+ fi
-+ else
-+ if test -z "$postdep_objects_CXX"; then
-+ postdep_objects_CXX="$p"
-+ else
-+ postdep_objects_CXX="$postdep_objects_CXX $p"
-+ fi
-+ fi
-+ ;;
-+
-+ *) ;; # Ignore the rest.
-+
-+ esac
-+ done
-+
-+ # Clean up.
-+ rm -f a.out a.exe
-+else
-+ echo "libtool.m4: error: problem compiling CXX test program"
-+fi
-+
-+$rm -f confest.$objext
-+
-+compiler_lib_search_dirs_CXX=
-+if test -n "$compiler_lib_search_path_CXX"; then
-+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-+fi
-+
-+# PORTME: override above test on systems where it is broken
-+case $host_os in
-+interix[3-9]*)
-+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
-+ # hack all around it, let's just trust "g++" to DTRT.
-+ predep_objects_CXX=
-+ postdep_objects_CXX=
-+ postdeps_CXX=
-+ ;;
-+
-+linux*)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ #
-+ # The more standards-conforming stlport4 library is
-+ # incompatible with the Cstd library. Avoid specifying
-+ # it if it's in CXXFLAGS. Ignore libCrun as
-+ # -library=stlport4 depends on it.
-+ case " $CXX $CXXFLAGS " in
-+ *" -library=stlport4 "*)
-+ solaris_use_stlport4=yes
-+ ;;
-+ esac
-+ if test "$solaris_use_stlport4" != yes; then
-+ postdeps_CXX='-library=Cstd -library=Crun'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # The more standards-conforming stlport4 library is
-+ # incompatible with the Cstd library. Avoid specifying
-+ # it if it's in CXXFLAGS. Ignore libCrun as
-+ # -library=stlport4 depends on it.
-+ case " $CXX $CXXFLAGS " in
-+ *" -library=stlport4 "*)
-+ solaris_use_stlport4=yes
-+ ;;
-+ esac
-+
-+ # Adding this requires a known-good setup of shared libraries for
-+ # Sun compiler versions before 5.6, else PIC objects from an old
-+ # archive will be linked into the output, leading to subtle bugs.
-+ if test "$solaris_use_stlport4" != yes; then
-+ postdeps_CXX='-library=Cstd -library=Crun'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+esac
-+
-+case " $postdeps_CXX " in
-+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-+esac
-+
-+lt_prog_compiler_wl_CXX=
-+lt_prog_compiler_pic_CXX=
-+lt_prog_compiler_static_CXX=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+ # C++ specific cases for pic, static, wl, etc.
-+ if test "$GXX" = yes; then
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ fi
-+ ;;
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+ mingw* | cygwin* | os2* | pw32*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-+ ;;
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_CXX='-fno-common'
-+ ;;
-+ *djgpp*)
-+ # DJGPP does not support shared libraries at all
-+ lt_prog_compiler_pic_CXX=
-+ ;;
-+ interix[3-9]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_CXX=-Kconform_pic
-+ fi
-+ ;;
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ esac
-+ else
-+ case $host_os in
-+ aix[4-9]*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ else
-+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ chorus*)
-+ case $cc_basename in
-+ cxch68*)
-+ # Green Hills C++ Compiler
-+ # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-+ ;;
-+ esac
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_CXX='-qnocommon'
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ freebsd* | dragonfly*)
-+ # FreeBSD uses GNU C++
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+ if test "$host_cpu" != ia64; then
-+ lt_prog_compiler_pic_CXX='+Z'
-+ fi
-+ ;;
-+ aCC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='+Z'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ interix*)
-+ # This is c89, which is MS Visual C++ (no shared libs)
-+ # Anyone wants to do a port?
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ # CC pic flag -KPIC is the default.
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ KCC*)
-+ # KAI C++ Compiler
-+ lt_prog_compiler_wl_CXX='--backend -Wl,'
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ icpc* | ecpc*)
-+ # Intel C++
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-static'
-+ ;;
-+ pgCC* | pgcpp*)
-+ # Portland Group C++ compiler.
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-fpic'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ lt_prog_compiler_wl_CXX='-Qoption ld '
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ ;;
-+ m88k*)
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ lt_prog_compiler_pic_CXX='-W c,exportall'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu)
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ lt_prog_compiler_wl_CXX='--backend -Wl,'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ cxx*)
-+ # Digital/Compaq C++
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ lt_prog_compiler_wl_CXX='-Qoption ld '
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ lt_prog_compiler_pic_CXX='-PIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ lt_prog_compiler_pic_CXX='-pic'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ lcc*)
-+ # Lucid
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ ;;
-+ *)
-+ lt_prog_compiler_can_build_shared_CXX=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_CXX"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_pic_works_CXX=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_pic_works_CXX=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
-+ case $lt_prog_compiler_pic_CXX in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_can_build_shared_CXX=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_CXX=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_static_works_CXX=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_static_works_CXX=yes
-+ fi
-+ else
-+ lt_cv_prog_compiler_static_works_CXX=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_CXX=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_CXX=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_CXX=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ case $host_os in
-+ aix[4-9]*)
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ ;;
-+ pw32*)
-+ export_symbols_cmds_CXX="$ltdll_cmds"
-+ ;;
-+ cygwin* | mingw*)
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ link_all_deplibs_CXX=no
-+ ;;
-+ *)
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ esac
-+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_CXX" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_CXX=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_CXX in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_CXX
-+ pic_flag=$lt_prog_compiler_pic_CXX
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-+ allow_undefined_flag_CXX=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_CXX=no
-+ else
-+ archive_cmds_need_lc_CXX=yes
-+ fi
-+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[4-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[3-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-+fi
-+
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-+fi
-+
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_CXX=
-+if test -n "$hardcode_libdir_flag_spec_CXX" || \
-+ test -n "$runpath_var_CXX" || \
-+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_CXX" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-+ test "$hardcode_minus_L_CXX" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_CXX=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_CXX=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_CXX=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-+echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-+
-+if test "$hardcode_action_CXX" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_CXX \
-+ CC_CXX \
-+ LD_CXX \
-+ lt_prog_compiler_wl_CXX \
-+ lt_prog_compiler_pic_CXX \
-+ lt_prog_compiler_static_CXX \
-+ lt_prog_compiler_no_builtin_flag_CXX \
-+ export_dynamic_flag_spec_CXX \
-+ thread_safe_flag_spec_CXX \
-+ whole_archive_flag_spec_CXX \
-+ enable_shared_with_static_runtimes_CXX \
-+ old_archive_cmds_CXX \
-+ old_archive_from_new_cmds_CXX \
-+ predep_objects_CXX \
-+ postdep_objects_CXX \
-+ predeps_CXX \
-+ postdeps_CXX \
-+ compiler_lib_search_path_CXX \
-+ compiler_lib_search_dirs_CXX \
-+ archive_cmds_CXX \
-+ archive_expsym_cmds_CXX \
-+ postinstall_cmds_CXX \
-+ postuninstall_cmds_CXX \
-+ old_archive_from_expsyms_cmds_CXX \
-+ allow_undefined_flag_CXX \
-+ no_undefined_flag_CXX \
-+ export_symbols_cmds_CXX \
-+ hardcode_libdir_flag_spec_CXX \
-+ hardcode_libdir_flag_spec_ld_CXX \
-+ hardcode_libdir_separator_CXX \
-+ hardcode_automatic_CXX \
-+ module_cmds_CXX \
-+ module_expsym_cmds_CXX \
-+ lt_cv_prog_compiler_c_o_CXX \
-+ fix_srcfile_path_CXX \
-+ exclude_expsyms_CXX \
-+ include_expsyms_CXX; do
-+
-+ case $var in
-+ old_archive_cmds_CXX | \
-+ old_archive_from_new_cmds_CXX | \
-+ archive_cmds_CXX | \
-+ archive_expsym_cmds_CXX | \
-+ module_cmds_CXX | \
-+ module_expsym_cmds_CXX | \
-+ old_archive_from_expsyms_cmds_CXX | \
-+ export_symbols_cmds_CXX | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_CXX
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_CXX
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_CXX
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_CXX
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_CXX
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_CXX
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_CXX
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_CXX
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_CXX
-+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_CXX
-+module_expsym_cmds=$lt_module_expsym_cmds_CXX
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_CXX
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_CXX
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_CXX
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_CXX
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_CXX
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_CXX
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_CXX
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_CXX
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_CXX
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_CXX
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_CXX
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_CXX
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_CXX
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC=$lt_save_CC
-+LDCXX=$LD
-+LD=$lt_save_LD
-+GCC=$lt_save_GCC
-+with_gnu_ldcxx=$with_gnu_ld
-+with_gnu_ld=$lt_save_with_gnu_ld
-+lt_cv_path_LDCXX=$lt_cv_path_LD
-+lt_cv_path_LD=$lt_save_path_LD
-+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ F77)
-+ if test -n "$F77" && test "X$F77" != "Xno"; then
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+
-+
-+archive_cmds_need_lc_F77=no
-+allow_undefined_flag_F77=
-+always_export_symbols_F77=no
-+archive_expsym_cmds_F77=
-+export_dynamic_flag_spec_F77=
-+hardcode_direct_F77=no
-+hardcode_libdir_flag_spec_F77=
-+hardcode_libdir_flag_spec_ld_F77=
-+hardcode_libdir_separator_F77=
-+hardcode_minus_L_F77=no
-+hardcode_automatic_F77=no
-+module_cmds_F77=
-+module_expsym_cmds_F77=
-+link_all_deplibs_F77=unknown
-+old_archive_cmds_F77=$old_archive_cmds
-+no_undefined_flag_F77=
-+whole_archive_flag_spec_F77=
-+enable_shared_with_static_runtimes_F77=no
-+
-+# Source file extension for f77 test sources.
-+ac_ext=f
-+
-+# Object file extension for compiled f77 test sources.
-+objext=o
-+objext_F77=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="\
-+ subroutine t
-+ return
-+ end
-+"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="\
-+ program t
-+ end
-+"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${F77-"f77"}
-+compiler=$CC
-+compiler_F77=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+aix[4-9]*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+{ echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6; }
-+
-+GCC_F77="$G77"
-+LD_F77="$LD"
-+
-+lt_prog_compiler_wl_F77=
-+lt_prog_compiler_pic_F77=
-+lt_prog_compiler_static_F77=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_static_F77='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+ lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_F77='-fno-common'
-+ ;;
-+
-+ interix[3-9]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared_F77=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_F77=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic_F77='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ else
-+ lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_F77='-qnocommon'
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-fpic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C 5.9
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ ;;
-+ *Sun\ F*)
-+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ lt_prog_compiler_wl_F77=''
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+
-+ rdos*)
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl_F77='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl_F77='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl_F77='-Qoption ld '
-+ lt_prog_compiler_pic_F77='-PIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic_F77='-Kconform_pic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_can_build_shared_F77=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic_F77='-pic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared_F77=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_F77"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_pic_works_F77=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_F77"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_pic_works_F77=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_F77" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
-+ case $lt_prog_compiler_pic_F77 in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_F77=
-+ lt_prog_compiler_can_build_shared_F77=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_F77=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_static_works_F77=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_static_works_F77=yes
-+ fi
-+ else
-+ lt_cv_prog_compiler_static_works_F77=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_F77" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_F77=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_F77=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_F77=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+ runpath_var=
-+ allow_undefined_flag_F77=
-+ enable_shared_with_static_runtimes_F77=no
-+ archive_cmds_F77=
-+ archive_expsym_cmds_F77=
-+ old_archive_From_new_cmds_F77=
-+ old_archive_from_expsyms_cmds_F77=
-+ export_dynamic_flag_spec_F77=
-+ whole_archive_flag_spec_F77=
-+ thread_safe_flag_spec_F77=
-+ hardcode_libdir_flag_spec_F77=
-+ hardcode_libdir_flag_spec_ld_F77=
-+ hardcode_libdir_separator_F77=
-+ hardcode_direct_F77=no
-+ hardcode_minus_L_F77=no
-+ hardcode_shlibpath_var_F77=unsupported
-+ link_all_deplibs_F77=unknown
-+ hardcode_automatic_F77=no
-+ module_cmds_F77=
-+ module_expsym_cmds_F77=
-+ always_export_symbols_F77=no
-+ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms_F77=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ # Exclude shared library initialization/finalization symbols.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs_F77=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_F77=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix[3-9]*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs_F77=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+
-+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_F77=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ allow_undefined_flag_F77=unsupported
-+ always_export_symbols_F77=no
-+ enable_shared_with_static_runtimes_F77=yes
-+ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ interix[3-9]*)
-+ hardcode_direct_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ gnu* | linux* | k*bsd*-gnu)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*) # Sun C 5.9
-+ whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_sharedflag='-G' ;;
-+ *Sun\ F*) # Sun Fortran 8.3
-+ tmp_sharedflag='-G' ;;
-+ *)
-+ tmp_sharedflag='-shared' ;;
-+ esac
-+ archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs_F77=no
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs_F77=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs_F77=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs_F77" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec_F77=
-+ export_dynamic_flag_spec_F77=
-+ whole_archive_flag_spec_F77=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag_F77=unsupported
-+ always_export_symbols_F77=yes
-+ archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L_F77=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct_F77=unsupported
-+ fi
-+ ;;
-+
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_F77=''
-+ hardcode_direct_F77=yes
-+ hardcode_libdir_separator_F77=':'
-+ link_all_deplibs_F77=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct_F77=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_F77=yes
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_libdir_separator_F77=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_F77=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_F77='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_f77_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_F77="-z nodefs"
-+ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_f77_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_F77=' ${wl}-bernotok'
-+ allow_undefined_flag_F77=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_F77='$convenience'
-+ archive_cmds_need_lc_F77=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec_F77=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec_F77=' '
-+ allow_undefined_flag_F77=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds_F77='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes_F77=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc_F77=no
-+ hardcode_direct_F77=no
-+ hardcode_automatic_F77=yes
-+ hardcode_shlibpath_var_F77=unsupported
-+ whole_archive_flag_spec_F77=''
-+ link_all_deplibs_F77=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_F77=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes
-+ hardcode_minus_L_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ hardcode_direct_F77=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+
-+ hardcode_direct_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-+ hardcode_direct_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+ *)
-+ hardcode_direct_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ link_all_deplibs_F77=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+ allow_undefined_flag_F77=unsupported
-+ archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag_F77=' -expect_unresolved \*'
-+ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag_F77=' -expect_unresolved \*'
-+ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec_F77='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator_F77=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag_F77=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'. GCC discards it without `$wl',
-+ # but is careful enough not to reorder.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ if test "$GCC" = yes; then
-+ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ else
-+ whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
-+ fi
-+ ;;
-+ esac
-+ link_all_deplibs_F77=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_minus_L_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds_F77='$CC -r -o $output$reload_objs'
-+ hardcode_direct_F77=no
-+ ;;
-+ motorola)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_F77=no
-+ export_dynamic_flag_spec_F77='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_F77=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs_F77=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag_F77='${wl}-z,text'
-+ archive_cmds_need_lc_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag_F77='${wl}-z,text'
-+ allow_undefined_flag_F77='${wl}-z,nodefs'
-+ archive_cmds_need_lc_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_F77=':'
-+ link_all_deplibs_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ *)
-+ ld_shlibs_F77=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-+echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-+test "$ld_shlibs_F77" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_F77" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_F77=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_F77 in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_F77
-+ pic_flag=$lt_prog_compiler_pic_F77
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-+ allow_undefined_flag_F77=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_F77=no
-+ else
-+ archive_cmds_need_lc_F77=yes
-+ fi
-+ allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[4-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[3-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-+fi
-+
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-+fi
-+
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_F77=
-+if test -n "$hardcode_libdir_flag_spec_F77" || \
-+ test -n "$runpath_var_F77" || \
-+ test "X$hardcode_automatic_F77" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_F77" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-+ test "$hardcode_minus_L_F77" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_F77=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_F77=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_F77=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-+echo "${ECHO_T}$hardcode_action_F77" >&6; }
-+
-+if test "$hardcode_action_F77" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_F77 \
-+ CC_F77 \
-+ LD_F77 \
-+ lt_prog_compiler_wl_F77 \
-+ lt_prog_compiler_pic_F77 \
-+ lt_prog_compiler_static_F77 \
-+ lt_prog_compiler_no_builtin_flag_F77 \
-+ export_dynamic_flag_spec_F77 \
-+ thread_safe_flag_spec_F77 \
-+ whole_archive_flag_spec_F77 \
-+ enable_shared_with_static_runtimes_F77 \
-+ old_archive_cmds_F77 \
-+ old_archive_from_new_cmds_F77 \
-+ predep_objects_F77 \
-+ postdep_objects_F77 \
-+ predeps_F77 \
-+ postdeps_F77 \
-+ compiler_lib_search_path_F77 \
-+ compiler_lib_search_dirs_F77 \
-+ archive_cmds_F77 \
-+ archive_expsym_cmds_F77 \
-+ postinstall_cmds_F77 \
-+ postuninstall_cmds_F77 \
-+ old_archive_from_expsyms_cmds_F77 \
-+ allow_undefined_flag_F77 \
-+ no_undefined_flag_F77 \
-+ export_symbols_cmds_F77 \
-+ hardcode_libdir_flag_spec_F77 \
-+ hardcode_libdir_flag_spec_ld_F77 \
-+ hardcode_libdir_separator_F77 \
-+ hardcode_automatic_F77 \
-+ module_cmds_F77 \
-+ module_expsym_cmds_F77 \
-+ lt_cv_prog_compiler_c_o_F77 \
-+ fix_srcfile_path_F77 \
-+ exclude_expsyms_F77 \
-+ include_expsyms_F77; do
-+
-+ case $var in
-+ old_archive_cmds_F77 | \
-+ old_archive_from_new_cmds_F77 | \
-+ archive_cmds_F77 | \
-+ archive_expsym_cmds_F77 | \
-+ module_cmds_F77 | \
-+ module_expsym_cmds_F77 | \
-+ old_archive_from_expsyms_cmds_F77 | \
-+ export_symbols_cmds_F77 | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_F77
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_F77
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_F77
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_F77
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_F77
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_F77
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_F77
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_F77
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_F77
-+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_F77
-+module_expsym_cmds=$lt_module_expsym_cmds_F77
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_F77
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_F77
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_F77
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_F77
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_F77
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_F77
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_F77
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_F77
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_F77
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_F77
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_F77
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_F77
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_F77
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ GCJ)
-+ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-+
-+
-+# Source file extension for Java test sources.
-+ac_ext=java
-+
-+# Object file extension for compiled Java test sources.
-+objext=o
-+objext_GCJ=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="class foo {}"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${GCJ-"gcj"}
-+compiler=$CC
-+compiler_GCJ=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# GCJ did not exist at the time GCC didn't implicitly link libc in.
-+archive_cmds_need_lc_GCJ=no
-+
-+old_archive_cmds_GCJ=$old_archive_cmds
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+
-+lt_prog_compiler_no_builtin_flag_GCJ=
-+
-+if test "$GCC" = yes; then
-+ lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_rtti_exceptions=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="-fno-rtti -fno-exceptions"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_rtti_exceptions=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+ lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-+else
-+ :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl_GCJ=
-+lt_prog_compiler_pic_GCJ=
-+lt_prog_compiler_static_GCJ=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_static_GCJ='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_GCJ='-fno-common'
-+ ;;
-+
-+ interix[3-9]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_GCJ=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic_GCJ='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ else
-+ lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_GCJ='-qnocommon'
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-fpic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C 5.9
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ ;;
-+ *Sun\ F*)
-+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ lt_prog_compiler_wl_GCJ=''
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+
-+ rdos*)
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl_GCJ='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl_GCJ='-Qoption ld '
-+ lt_prog_compiler_pic_GCJ='-PIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic_GCJ='-Kconform_pic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic_GCJ='-pic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_GCJ"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_pic_works_GCJ=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_pic_works_GCJ=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
-+ case $lt_prog_compiler_pic_GCJ in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_GCJ=
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_GCJ=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_static_works_GCJ=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_static_works_GCJ=yes
-+ fi
-+ else
-+ lt_cv_prog_compiler_static_works_GCJ=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_GCJ" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_GCJ=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_GCJ=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_GCJ=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+ runpath_var=
-+ allow_undefined_flag_GCJ=
-+ enable_shared_with_static_runtimes_GCJ=no
-+ archive_cmds_GCJ=
-+ archive_expsym_cmds_GCJ=
-+ old_archive_From_new_cmds_GCJ=
-+ old_archive_from_expsyms_cmds_GCJ=
-+ export_dynamic_flag_spec_GCJ=
-+ whole_archive_flag_spec_GCJ=
-+ thread_safe_flag_spec_GCJ=
-+ hardcode_libdir_flag_spec_GCJ=
-+ hardcode_libdir_flag_spec_ld_GCJ=
-+ hardcode_libdir_separator_GCJ=
-+ hardcode_direct_GCJ=no
-+ hardcode_minus_L_GCJ=no
-+ hardcode_shlibpath_var_GCJ=unsupported
-+ link_all_deplibs_GCJ=unknown
-+ hardcode_automatic_GCJ=no
-+ module_cmds_GCJ=
-+ module_expsym_cmds_GCJ=
-+ always_export_symbols_GCJ=no
-+ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms_GCJ=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ # Exclude shared library initialization/finalization symbols.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs_GCJ=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_GCJ=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix[3-9]*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs_GCJ=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+
-+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_GCJ=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ allow_undefined_flag_GCJ=unsupported
-+ always_export_symbols_GCJ=no
-+ enable_shared_with_static_runtimes_GCJ=yes
-+ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ interix[3-9]*)
-+ hardcode_direct_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ gnu* | linux* | k*bsd*-gnu)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*) # Sun C 5.9
-+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_sharedflag='-G' ;;
-+ *Sun\ F*) # Sun Fortran 8.3
-+ tmp_sharedflag='-G' ;;
-+ *)
-+ tmp_sharedflag='-shared' ;;
-+ esac
-+ archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs_GCJ=no
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs_GCJ=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs_GCJ=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs_GCJ" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec_GCJ=
-+ export_dynamic_flag_spec_GCJ=
-+ whole_archive_flag_spec_GCJ=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag_GCJ=unsupported
-+ always_export_symbols_GCJ=yes
-+ archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L_GCJ=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct_GCJ=unsupported
-+ fi
-+ ;;
-+
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_GCJ=''
-+ hardcode_direct_GCJ=yes
-+ hardcode_libdir_separator_GCJ=':'
-+ link_all_deplibs_GCJ=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct_GCJ=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_libdir_separator_GCJ=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_GCJ=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_GCJ='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_GCJ="-z nodefs"
-+ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_GCJ=' ${wl}-bernotok'
-+ allow_undefined_flag_GCJ=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_GCJ='$convenience'
-+ archive_cmds_need_lc_GCJ=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec_GCJ=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec_GCJ=' '
-+ allow_undefined_flag_GCJ=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds_GCJ='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes_GCJ=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_direct_GCJ=no
-+ hardcode_automatic_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=unsupported
-+ whole_archive_flag_spec_GCJ=''
-+ link_all_deplibs_GCJ=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_GCJ=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ hardcode_direct_GCJ=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+
-+ hardcode_direct_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-+ hardcode_direct_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+ *)
-+ hardcode_direct_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ link_all_deplibs_GCJ=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+ allow_undefined_flag_GCJ=unsupported
-+ archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator_GCJ=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag_GCJ=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'. GCC discards it without `$wl',
-+ # but is careful enough not to reorder.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ if test "$GCC" = yes; then
-+ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ else
-+ whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
-+ fi
-+ ;;
-+ esac
-+ link_all_deplibs_GCJ=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-+ hardcode_direct_GCJ=no
-+ ;;
-+ motorola)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_GCJ=no
-+ export_dynamic_flag_spec_GCJ='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_GCJ=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs_GCJ=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag_GCJ='${wl}-z,text'
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag_GCJ='${wl}-z,text'
-+ allow_undefined_flag_GCJ='${wl}-z,nodefs'
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_GCJ=':'
-+ link_all_deplibs_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ *)
-+ ld_shlibs_GCJ=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-+echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-+test "$ld_shlibs_GCJ" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_GCJ" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_GCJ=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_GCJ in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_GCJ
-+ pic_flag=$lt_prog_compiler_pic_GCJ
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-+ allow_undefined_flag_GCJ=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_GCJ=no
-+ else
-+ archive_cmds_need_lc_GCJ=yes
-+ fi
-+ allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[4-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[3-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-+fi
-+
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-+fi
-+
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_GCJ=
-+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-+ test -n "$runpath_var_GCJ" || \
-+ test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_GCJ" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-+ test "$hardcode_minus_L_GCJ" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_GCJ=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_GCJ=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_GCJ=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-+echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-+
-+if test "$hardcode_action_GCJ" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_GCJ \
-+ CC_GCJ \
-+ LD_GCJ \
-+ lt_prog_compiler_wl_GCJ \
-+ lt_prog_compiler_pic_GCJ \
-+ lt_prog_compiler_static_GCJ \
-+ lt_prog_compiler_no_builtin_flag_GCJ \
-+ export_dynamic_flag_spec_GCJ \
-+ thread_safe_flag_spec_GCJ \
-+ whole_archive_flag_spec_GCJ \
-+ enable_shared_with_static_runtimes_GCJ \
-+ old_archive_cmds_GCJ \
-+ old_archive_from_new_cmds_GCJ \
-+ predep_objects_GCJ \
-+ postdep_objects_GCJ \
-+ predeps_GCJ \
-+ postdeps_GCJ \
-+ compiler_lib_search_path_GCJ \
-+ compiler_lib_search_dirs_GCJ \
-+ archive_cmds_GCJ \
-+ archive_expsym_cmds_GCJ \
-+ postinstall_cmds_GCJ \
-+ postuninstall_cmds_GCJ \
-+ old_archive_from_expsyms_cmds_GCJ \
-+ allow_undefined_flag_GCJ \
-+ no_undefined_flag_GCJ \
-+ export_symbols_cmds_GCJ \
-+ hardcode_libdir_flag_spec_GCJ \
-+ hardcode_libdir_flag_spec_ld_GCJ \
-+ hardcode_libdir_separator_GCJ \
-+ hardcode_automatic_GCJ \
-+ module_cmds_GCJ \
-+ module_expsym_cmds_GCJ \
-+ lt_cv_prog_compiler_c_o_GCJ \
-+ fix_srcfile_path_GCJ \
-+ exclude_expsyms_GCJ \
-+ include_expsyms_GCJ; do
-+
-+ case $var in
-+ old_archive_cmds_GCJ | \
-+ old_archive_from_new_cmds_GCJ | \
-+ archive_cmds_GCJ | \
-+ archive_expsym_cmds_GCJ | \
-+ module_cmds_GCJ | \
-+ module_expsym_cmds_GCJ | \
-+ old_archive_from_expsyms_cmds_GCJ | \
-+ export_symbols_cmds_GCJ | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_GCJ
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_GCJ
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_GCJ
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_GCJ
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_GCJ
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_GCJ
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_GCJ
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_GCJ
-+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_GCJ
-+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_GCJ
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_GCJ
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_GCJ
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_GCJ
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_GCJ
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_GCJ
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_GCJ
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_GCJ
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_GCJ
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_GCJ
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_GCJ
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ RC)
-+
-+
-+# Source file extension for RC test sources.
-+ac_ext=rc
-+
-+# Object file extension for compiled RC test sources.
-+objext=o
-+objext_RC=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="$lt_simple_compile_test_code"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${RC-"windres"}
-+compiler=$CC
-+compiler_RC=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+lt_cv_prog_compiler_c_o_RC=yes
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_RC \
-+ CC_RC \
-+ LD_RC \
-+ lt_prog_compiler_wl_RC \
-+ lt_prog_compiler_pic_RC \
-+ lt_prog_compiler_static_RC \
-+ lt_prog_compiler_no_builtin_flag_RC \
-+ export_dynamic_flag_spec_RC \
-+ thread_safe_flag_spec_RC \
-+ whole_archive_flag_spec_RC \
-+ enable_shared_with_static_runtimes_RC \
-+ old_archive_cmds_RC \
-+ old_archive_from_new_cmds_RC \
-+ predep_objects_RC \
-+ postdep_objects_RC \
-+ predeps_RC \
-+ postdeps_RC \
-+ compiler_lib_search_path_RC \
-+ compiler_lib_search_dirs_RC \
-+ archive_cmds_RC \
-+ archive_expsym_cmds_RC \
-+ postinstall_cmds_RC \
-+ postuninstall_cmds_RC \
-+ old_archive_from_expsyms_cmds_RC \
-+ allow_undefined_flag_RC \
-+ no_undefined_flag_RC \
-+ export_symbols_cmds_RC \
-+ hardcode_libdir_flag_spec_RC \
-+ hardcode_libdir_flag_spec_ld_RC \
-+ hardcode_libdir_separator_RC \
-+ hardcode_automatic_RC \
-+ module_cmds_RC \
-+ module_expsym_cmds_RC \
-+ lt_cv_prog_compiler_c_o_RC \
-+ fix_srcfile_path_RC \
-+ exclude_expsyms_RC \
-+ include_expsyms_RC; do
-+
-+ case $var in
-+ old_archive_cmds_RC | \
-+ old_archive_from_new_cmds_RC | \
-+ archive_cmds_RC | \
-+ archive_expsym_cmds_RC | \
-+ module_cmds_RC | \
-+ module_expsym_cmds_RC | \
-+ old_archive_from_expsyms_cmds_RC | \
-+ export_symbols_cmds_RC | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_RC
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_RC
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_RC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_RC
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_RC
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_RC
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_RC
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_RC
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_RC
-+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_RC
-+module_expsym_cmds=$lt_module_expsym_cmds_RC
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_RC
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_RC
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_RC
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_RC
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_RC
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_RC
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_RC
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_RC
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_RC
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_RC
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_RC
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_RC
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_RC
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ ;;
-+
-+ *)
-+ { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-+echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+
-+ # Append the new tag name to the list of available tags.
-+ if test -n "$tagname" ; then
-+ available_tags="$available_tags $tagname"
-+ fi
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ # Now substitute the updated list of available tags.
-+ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-+ mv "${ofile}T" "$ofile"
-+ chmod +x "$ofile"
-+ else
-+ rm -f "${ofile}T"
-+ { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-+echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+fi
-+
-+
-+
-+# This can be used to rebuild libtool when needed
-+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-+
-+# Always use our own libtool.
-+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+
-+# Prevent multiple expansion
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+#
-+# Check for AViiON Machines running DGUX
-+#
-+ac_is_dgux=no
-+if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
-+ { echo "$as_me:$LINENO: checking for sys/dg_sys_info.h" >&5
-+echo $ECHO_N "checking for sys/dg_sys_info.h... $ECHO_C" >&6; }
-+if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_dg_sys_info_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_dg_sys_info_h" >&6; }
-+else
-+ # Is the header compilable?
-+{ echo "$as_me:$LINENO: checking sys/dg_sys_info.h usability" >&5
-+echo $ECHO_N "checking sys/dg_sys_info.h usability... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+@%:@include <sys/dg_sys_info.h>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_compiler=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6; }
-+
-+# Is the header present?
-+{ echo "$as_me:$LINENO: checking sys/dg_sys_info.h presence" >&5
-+echo $ECHO_N "checking sys/dg_sys_info.h presence... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <sys/dg_sys_info.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6; }
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: in the future, the compiler will take precedence" >&2;}
-+ ( cat <<\_ASBOX
-+@%:@@%:@ -------------------------------- @%:@@%:@
-+@%:@@%:@ Report this to Hans_Boehm at hp.com @%:@@%:@
-+@%:@@%:@ -------------------------------- @%:@@%:@
-+_ASBOX
-+ ) | sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: checking for sys/dg_sys_info.h" >&5
-+echo $ECHO_N "checking for sys/dg_sys_info.h... $ECHO_C" >&6; }
-+if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_sys_dg_sys_info_h=$ac_header_preproc
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_dg_sys_info_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_dg_sys_info_h" >&6; }
-+
-+fi
-+if test $ac_cv_header_sys_dg_sys_info_h = yes; then
-+ ac_is_dgux=yes;
-+fi
-+
-+
-+
-+ ## :GOTCHA: we do not check anything but sys/dg_sys_info.h
-+if test $ac_is_dgux = yes; then
-+ if test "$enable_full_debug" = "yes"; then
-+ CFLAGS="-g -mstandard -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
-+ CXXFLAGS="-g -mstandard -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
-+ else
-+ CFLAGS="-DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
-+ CXXFLAGS="-DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
-+ fi
-+
-+
-+fi
-+
-+
-+# Check whether --with-target-subdir was given.
-+if test "${with_target_subdir+set}" = set; then
-+ withval=$with_target_subdir;
-+fi
-+
-+
-+# Check whether --with-cross-host was given.
-+if test "${with_cross_host+set}" = set; then
-+ withval=$with_cross_host;
-+fi
-+
-+
-+# automake wants to see AC_EXEEXT. But we don't need it. And having
-+# it is actually a problem, because the compiler we're passed can't
-+# necessarily do a full link. So we fool automake here.
-+if false; then
-+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
-+ # to nothing, so nothing would remain between `then' and `fi' if it
-+ # were not for the `:' below.
-+ :
-+
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for threads package to use" >&5
-+echo $ECHO_N "checking for threads package to use... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $THREADS" >&5
-+echo "${ECHO_T}$THREADS" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether Solaris gcc optimization fix is necessary" >&5
-+echo $ECHO_N "checking whether Solaris gcc optimization fix is necessary... $ECHO_C" >&6; }
-+case "$host" in
-+ *aix*)
-+ if test "$GCC" = yes; then
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+ new_CFLAGS=
-+ for i in $CFLAGS; do
-+ case "$i" in
-+ -O*)
-+ ;;
-+ *)
-+ new_CFLAGS="$new_CFLAGS $i"
-+ ;;
-+ esac
-+ done
-+ CFLAGS="$new_CFLAGS"
-+ else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+ fi
-+ ;;
-+ *) { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; } ;;
-+esac
-+
-+MY_CFLAGS="$CFLAGS"
-+
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define SILENT 1
-+_ACEOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_SIGNALS 1
-+_ACEOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_EXECUTE_PERMISSION 1
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define JAVA_FINALIZATION 1
-+_ACEOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_GCJ_SUPPORT 1
-+_ACEOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define ATOMIC_UNCOLLECTABLE 1
-+_ACEOF
-+
-+
-+if test -n "${with_cross_host}"; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_SIGSET 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_CLOCK 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SMALL_CONFIG 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_DEBUGGING 1
-+_ACEOF
-+
-+fi
-+
-+UNWINDLIBS=
-+# Check whether --enable-full-debug was given.
-+if test "${enable_full_debug+set}" = set; then
-+ enableval=$enable_full_debug; if test "$enable_full_debug" = "yes"; then
-+ { echo "$as_me:$LINENO: WARNING: \"Should define GC_DEBUG and use debug alloc. in clients.\"" >&5
-+echo "$as_me: WARNING: \"Should define GC_DEBUG and use debug alloc. in clients.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define KEEP_BACK_PTRS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define DBG_HDRS_ALL 1
-+_ACEOF
-+
-+ case $host in
-+ ia64-*-linux* )
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define MAKE_BACK_GRAPH 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SAVE_CALL_COUNT 8
-+_ACEOF
-+
-+ { echo "$as_me:$LINENO: checking for backtrace in -lunwind" >&5
-+echo $ECHO_N "checking for backtrace in -lunwind... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_unwind_backtrace+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lunwind $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char backtrace ();
-+int
-+main ()
-+{
-+return backtrace ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_unwind_backtrace=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_unwind_backtrace=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_unwind_backtrace" >&5
-+echo "${ECHO_T}$ac_cv_lib_unwind_backtrace" >&6; }
-+if test $ac_cv_lib_unwind_backtrace = yes; then
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_HAVE_BUILTIN_BACKTRACE 1
-+_ACEOF
-+
-+ UNWINDLIBS=-lunwind
-+ { echo "$as_me:$LINENO: WARNING: \"Client code may need to link against libunwind.\"" >&5
-+echo "$as_me: WARNING: \"Client code may need to link against libunwind.\"" >&2;}
-+
-+fi
-+
-+ ;;
-+ x86-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* )
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define MAKE_BACK_GRAPH 1
-+_ACEOF
-+
-+ { echo "$as_me:$LINENO: WARNING: \"Client must not use -fomit-frame-pointer.\"" >&5
-+echo "$as_me: WARNING: \"Client must not use -fomit-frame-pointer.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SAVE_CALL_COUNT 8
-+_ACEOF
-+
-+ ;;
-+ i345686-*-dgux*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define MAKE_BACK_GRAPH 1
-+_ACEOF
-+
-+ ;;
-+ esac
-+ fi
-+fi
-+
-+
-+
-+
-+# Check whether --enable-redirect-malloc was given.
-+if test "${enable_redirect_malloc+set}" = set; then
-+ enableval=$enable_redirect_malloc;
-+fi
-+
-+
-+if test "${enable_redirect_malloc}" = yes; then
-+ if test "${enable_full_debug}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define REDIRECT_MALLOC GC_debug_malloc_replacement
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define REDIRECT_REALLOC GC_debug_realloc_replacement
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define REDIRECT_FREE GC_debug_free
-+_ACEOF
-+
-+ else
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define REDIRECT_MALLOC GC_malloc
-+_ACEOF
-+
-+ fi
-+fi
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define _IN_LIBGC 1
-+_ACEOF
-+
-+
-+# Check whether --enable-gc-assertions was given.
-+if test "${enable_gc_assertions+set}" = set; then
-+ enableval=$enable_gc_assertions;
-+fi
-+
-+if test "${enable_gc_assertions}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_ASSERTIONS 1
-+_ACEOF
-+
-+fi
-+
-+ if test -z "$with_cross_host"; then
-+ USE_LIBDIR_TRUE=
-+ USE_LIBDIR_FALSE='#'
-+else
-+ USE_LIBDIR_TRUE='#'
-+ USE_LIBDIR_FALSE=
-+fi
-+
-+
-+if test "${multilib}" = "yes"; then
-+ multilib_arg="--enable-multilib"
-+else
-+ multilib_arg=
-+fi
-+
-+ac_config_files="$ac_config_files Makefile include/Makefile include/private/Makefile doc/Makefile"
-+
-+ac_config_commands="$ac_config_commands default"
-+
-+cat >confcache <<\_ACEOF
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs, see configure's option --config-cache.
-+# It is not useful on other systems. If it contains results you don't
-+# want to keep, you may remove or edit it.
-+#
-+# config.status only pays attention to the cache file if you give it
-+# the --recheck option to rerun configure.
-+#
-+# `ac_cv_env_foo' variables (set or unset) will be overridden when
-+# loading this file, other *unset* `ac_cv_foo' will be assigned the
-+# following values.
-+
-+_ACEOF
-+
-+# The following way of writing the cache mishandles newlines in values,
-+# but we know of no workaround that is simple, portable, and efficient.
-+# So, we kill variables containing newlines.
-+# Ultrix sh set writes to stderr and can't be redirected directly,
-+# and sets the high bit in the cache file unless we assign to the vars.
-+(
-+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
-+
-+ (set) 2>&1 |
-+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
-+ # `set' does not quote correctly, so add quotes (double-quote
-+ # substitution turns \\\\ into \\, and sed turns \\ into \).
-+ sed -n \
-+ "s/'/'\\\\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-+ ;; #(
-+ *)
-+ # `set' quotes correctly as required by POSIX, so do not add quotes.
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-+ ;;
-+ esac |
-+ sort
-+) |
-+ sed '
-+ /^ac_cv_env_/b end
-+ t clear
-+ :clear
-+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-+ t end
-+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ :end' >>confcache
-+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-+ if test -w "$cache_file"; then
-+ test "x$cache_file" != "x/dev/null" &&
-+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+echo "$as_me: updating cache $cache_file" >&6;}
-+ cat confcache >$cache_file
-+ else
-+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-+ fi
-+fi
-+rm -f confcache
-+
-+test "x$prefix" = xNONE && prefix=$ac_default_prefix
-+# Let make expand exec_prefix.
-+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-+
-+# Transform confdefs.h into DEFS.
-+# Protect against shell expansion while executing Makefile rules.
-+# Protect against Makefile macro expansion.
-+#
-+# If the first sed substitution is executed (which looks for macros that
-+# take arguments), then branch to the quote section. Otherwise,
-+# look for a macro that doesn't take arguments.
-+ac_script='
-+t clear
-+:clear
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-+t quote
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-+t quote
-+b any
-+:quote
-+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-+s/\[/\\&/g
-+s/\]/\\&/g
-+s/\$/$$/g
-+H
-+:any
-+${
-+ g
-+ s/^\n//
-+ s/\n/ /g
-+ p
-+}
-+'
-+DEFS=`sed -n "$ac_script" confdefs.h`
-+
-+
-+ac_libobjs=
-+ac_ltlibobjs=
-+for ac_i in : $LIB@&t at OBJS; do test "x$ac_i" = x: && continue
-+ # 1. Remove the extension, and $U if already installed.
-+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-+ ac_i=`echo "$ac_i" | sed "$ac_script"`
-+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
-+ # will be set to the directory where LIBOBJS objects are built.
-+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-+done
-+LIB@&t at OBJS=$ac_libobjs
-+
-+LTLIBOBJS=$ac_ltlibobjs
-+
-+
-+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCCAS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"am__fastdepCCAS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${POWERPC_DARWIN_TRUE}" && test -z "${POWERPC_DARWIN_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"POWERPC_DARWIN\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"POWERPC_DARWIN\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${COMPILER_XLC_TRUE}" && test -z "${COMPILER_XLC_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"COMPILER_XLC\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"COMPILER_XLC\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${CPLUSPLUS_TRUE}" && test -z "${CPLUSPLUS_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"CPLUSPLUS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"CPLUSPLUS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${USE_LIBDIR_TRUE}" && test -z "${USE_LIBDIR_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"USE_LIBDIR\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"USE_LIBDIR\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+: ${CONFIG_STATUS=./config.status}
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF
-+#! $SHELL
-+# Generated by $as_me.
-+# Run this file to recreate the current configuration.
-+# Compiler output produced by configure, useful for debugging
-+# configure, is in config.log if it exists.
-+
-+debug=false
-+ac_cs_recheck=false
-+ac_cs_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
-+ sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
-+ N
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-+ t loop
-+ s/-\n.*//
-+ ' >$as_me.lineno &&
-+ chmod +x "$as_me.lineno" ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+ as_ln_s='cp -p'
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ test -d ./-p && rmdir ./-p
-+ as_mkdir_p=false
-+fi
-+
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+exec 6>&1
-+
-+# Save the log message, to keep $[0] and so on meaningful, and to
-+# report actual input values of CONFIG_FILES etc. instead of their
-+# values after options handling.
-+ac_log="
-+This file was extended by libgc-mono $as_me 6.6, which was
-+generated by GNU Autoconf 2.61. Invocation command line was
-+
-+ CONFIG_FILES = $CONFIG_FILES
-+ CONFIG_HEADERS = $CONFIG_HEADERS
-+ CONFIG_LINKS = $CONFIG_LINKS
-+ CONFIG_COMMANDS = $CONFIG_COMMANDS
-+ $ $0 $@
-+
-+on `(hostname || uname -n) 2>/dev/null | sed 1q`
-+"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+# Files that config.status was made for.
-+config_files="$ac_config_files"
-+config_commands="$ac_config_commands"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ac_cs_usage="\
-+\`$as_me' instantiates files from templates according to the
-+current configuration.
-+
-+Usage: $0 [OPTIONS] [FILE]...
-+
-+ -h, --help print this help, then exit
-+ -V, --version print version number and configuration settings, then exit
-+ -q, --quiet do not print progress messages
-+ -d, --debug don't remove temporary files
-+ --recheck update $as_me by reconfiguring in the same conditions
-+ --file=FILE[:TEMPLATE]
-+ instantiate the configuration file FILE
-+
-+Configuration files:
-+$config_files
-+
-+Configuration commands:
-+$config_commands
-+
-+Report bugs to <bug-autoconf at gnu.org>."
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ac_cs_version="\\
-+libgc-mono config.status 6.6
-+configured by $0, generated by GNU Autoconf 2.61,
-+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-+
-+Copyright (C) 2006 Free Software Foundation, Inc.
-+This config.status script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it."
-+
-+ac_pwd='$ac_pwd'
-+srcdir='$srcdir'
-+INSTALL='$INSTALL'
-+MKDIR_P='$MKDIR_P'
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If no file are specified by the user, then we need to provide default
-+# value. By we need to know if files were specified by the user.
-+ac_need_defaults=:
-+while test $# != 0
-+do
-+ case $1 in
-+ --*=*)
-+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-+ ac_shift=:
-+ ;;
-+ *)
-+ ac_option=$1
-+ ac_optarg=$2
-+ ac_shift=shift
-+ ;;
-+ esac
-+
-+ case $ac_option in
-+ # Handling of the options.
-+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-+ ac_cs_recheck=: ;;
-+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-+ echo "$ac_cs_version"; exit ;;
-+ --debug | --debu | --deb | --de | --d | -d )
-+ debug=: ;;
-+ --file | --fil | --fi | --f )
-+ $ac_shift
-+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+ ac_need_defaults=false;;
-+ --he | --h | --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit ;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
-+ ac_cs_silent=: ;;
-+
-+ # This is an error.
-+ -*) { echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2
-+ { (exit 1); exit 1; }; } ;;
-+
-+ *) ac_config_targets="$ac_config_targets $1"
-+ ac_need_defaults=false ;;
-+
-+ esac
-+ shift
-+done
-+
-+ac_configure_extra_args=
-+
-+if $ac_cs_silent; then
-+ exec 6>/dev/null
-+ ac_configure_extra_args="$ac_configure_extra_args --silent"
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+if \$ac_cs_recheck; then
-+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ CONFIG_SHELL=$SHELL
-+ export CONFIG_SHELL
-+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX
-+@%:@@%:@ Running $as_me. @%:@@%:@
-+_ASBOX
-+ echo "$ac_log"
-+} >&5
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+#
-+# INIT-COMMANDS
-+#
-+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-+srcdir=${srcdir}
-+host=${host}
-+CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+CC="${CC}"
-+DEFS="$DEFS"
-+
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+# Handling of arguments.
-+for ac_config_target in $ac_config_targets
-+do
-+ case $ac_config_target in
-+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+ "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
-+ "include/private/Makefile") CONFIG_FILES="$CONFIG_FILES include/private/Makefile" ;;
-+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-+ "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
-+
-+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
-+done
-+
-+
-+# If the user did not use the arguments to specify the items to instantiate,
-+# then the envvar interface is used. Set only those that are not.
-+# We use the long form for the default assignment because of an extremely
-+# bizarre bug on SunOS 4.1.3.
-+if $ac_need_defaults; then
-+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-+fi
-+
-+# Have a temporary directory for convenience. Make it in the build tree
-+# simply because there is no reason against having it here, and in addition,
-+# creating and moving files from /tmp can sometimes cause problems.
-+# Hook for its removal unless debugging.
-+# Note that there is a small window in which the directory will not be cleaned:
-+# after its creation but before its name has been assigned to `$tmp'.
-+$debug ||
-+{
-+ tmp=
-+ trap 'exit_status=$?
-+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-+' 0
-+ trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-+# Create a (secure) tmp directory for tmp files.
-+
-+{
-+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-+ test -n "$tmp" && test -d "$tmp"
-+} ||
-+{
-+ tmp=./conf$$-$RANDOM
-+ (umask 077 && mkdir "$tmp")
-+} ||
-+{
-+ echo "$me: cannot create a temporary directory in ." >&2
-+ { (exit 1); exit 1; }
-+}
-+
-+#
-+# Set up the sed scripts for CONFIG_FILES section.
-+#
-+
-+# No need to generate the scripts if there are no CONFIG_FILES.
-+# This happens for instance when ./config.status config.h
-+if test -n "$CONFIG_FILES"; then
-+
-+_ACEOF
-+
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+ cat >conf$$subs.sed <<_ACEOF
-+SHELL!$SHELL$ac_delim
-+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-+exec_prefix!$exec_prefix$ac_delim
-+prefix!$prefix$ac_delim
-+program_transform_name!$program_transform_name$ac_delim
-+bindir!$bindir$ac_delim
-+sbindir!$sbindir$ac_delim
-+libexecdir!$libexecdir$ac_delim
-+datarootdir!$datarootdir$ac_delim
-+datadir!$datadir$ac_delim
-+sysconfdir!$sysconfdir$ac_delim
-+sharedstatedir!$sharedstatedir$ac_delim
-+localstatedir!$localstatedir$ac_delim
-+includedir!$includedir$ac_delim
-+oldincludedir!$oldincludedir$ac_delim
-+docdir!$docdir$ac_delim
-+infodir!$infodir$ac_delim
-+htmldir!$htmldir$ac_delim
-+dvidir!$dvidir$ac_delim
-+pdfdir!$pdfdir$ac_delim
-+psdir!$psdir$ac_delim
-+libdir!$libdir$ac_delim
-+localedir!$localedir$ac_delim
-+mandir!$mandir$ac_delim
-+DEFS!$DEFS$ac_delim
-+ECHO_C!$ECHO_C$ac_delim
-+ECHO_N!$ECHO_N$ac_delim
-+ECHO_T!$ECHO_T$ac_delim
-+LIBS!$LIBS$ac_delim
-+build_alias!$build_alias$ac_delim
-+host_alias!$host_alias$ac_delim
-+target_alias!$target_alias$ac_delim
-+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-+INSTALL_DATA!$INSTALL_DATA$ac_delim
-+am__isrc!$am__isrc$ac_delim
-+CYGPATH_W!$CYGPATH_W$ac_delim
-+PACKAGE!$PACKAGE$ac_delim
-+VERSION!$VERSION$ac_delim
-+ACLOCAL!$ACLOCAL$ac_delim
-+AUTOCONF!$AUTOCONF$ac_delim
-+AUTOMAKE!$AUTOMAKE$ac_delim
-+AUTOHEADER!$AUTOHEADER$ac_delim
-+MAKEINFO!$MAKEINFO$ac_delim
-+install_sh!$install_sh$ac_delim
-+STRIP!$STRIP$ac_delim
-+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-+mkdir_p!$mkdir_p$ac_delim
-+AWK!$AWK$ac_delim
-+SET_MAKE!$SET_MAKE$ac_delim
-+am__leading_dot!$am__leading_dot$ac_delim
-+AMTAR!$AMTAR$ac_delim
-+am__tar!$am__tar$ac_delim
-+am__untar!$am__untar$ac_delim
-+build!$build$ac_delim
-+build_cpu!$build_cpu$ac_delim
-+build_vendor!$build_vendor$ac_delim
-+build_os!$build_os$ac_delim
-+host!$host$ac_delim
-+host_cpu!$host_cpu$ac_delim
-+host_vendor!$host_vendor$ac_delim
-+host_os!$host_os$ac_delim
-+GC_VERSION!$GC_VERSION$ac_delim
-+CC!$CC$ac_delim
-+CFLAGS!$CFLAGS$ac_delim
-+LDFLAGS!$LDFLAGS$ac_delim
-+CPPFLAGS!$CPPFLAGS$ac_delim
-+ac_ct_CC!$ac_ct_CC$ac_delim
-+EXEEXT!$EXEEXT$ac_delim
-+OBJEXT!$OBJEXT$ac_delim
-+DEPDIR!$DEPDIR$ac_delim
-+am__include!$am__include$ac_delim
-+am__quote!$am__quote$ac_delim
-+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-+CCDEPMODE!$CCDEPMODE$ac_delim
-+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-+CXX!$CXX$ac_delim
-+CXXFLAGS!$CXXFLAGS$ac_delim
-+ac_ct_CXX!$ac_ct_CXX$ac_delim
-+CXXDEPMODE!$CXXDEPMODE$ac_delim
-+am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
-+am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
-+CCAS!$CCAS$ac_delim
-+CCASFLAGS!$CCASFLAGS$ac_delim
-+CCASDEPMODE!$CCASDEPMODE$ac_delim
-+am__fastdepCCAS_TRUE!$am__fastdepCCAS_TRUE$ac_delim
-+am__fastdepCCAS_FALSE!$am__fastdepCCAS_FALSE$ac_delim
-+AR!$AR$ac_delim
-+RANLIB!$RANLIB$ac_delim
-+_ACEOF
-+
-+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
-+ break
-+ elif $ac_last_try; then
-+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+ fi
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+ ac_eof=`expr $ac_eof + 1`
-+fi
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+_ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+ cat >conf$$subs.sed <<_ACEOF
-+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
-+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
-+MAINT!$MAINT$ac_delim
-+GC_CFLAGS!$GC_CFLAGS$ac_delim
-+THREADDLLIBS!$THREADDLLIBS$ac_delim
-+POWERPC_DARWIN_TRUE!$POWERPC_DARWIN_TRUE$ac_delim
-+POWERPC_DARWIN_FALSE!$POWERPC_DARWIN_FALSE$ac_delim
-+COMPILER_XLC_TRUE!$COMPILER_XLC_TRUE$ac_delim
-+COMPILER_XLC_FALSE!$COMPILER_XLC_FALSE$ac_delim
-+EXTRA_TEST_LIBS!$EXTRA_TEST_LIBS$ac_delim
-+target_all!$target_all$ac_delim
-+CPLUSPLUS_TRUE!$CPLUSPLUS_TRUE$ac_delim
-+CPLUSPLUS_FALSE!$CPLUSPLUS_FALSE$ac_delim
-+INCLUDES!$INCLUDES$ac_delim
-+CXXINCLUDES!$CXXINCLUDES$ac_delim
-+addobjs!$addobjs$ac_delim
-+addincludes!$addincludes$ac_delim
-+addlibs!$addlibs$ac_delim
-+addtests!$addtests$ac_delim
-+SED!$SED$ac_delim
-+GREP!$GREP$ac_delim
-+EGREP!$EGREP$ac_delim
-+LN_S!$LN_S$ac_delim
-+ECHO!$ECHO$ac_delim
-+DSYMUTIL!$DSYMUTIL$ac_delim
-+NMEDIT!$NMEDIT$ac_delim
-+CPP!$CPP$ac_delim
-+CXXCPP!$CXXCPP$ac_delim
-+F77!$F77$ac_delim
-+FFLAGS!$FFLAGS$ac_delim
-+ac_ct_F77!$ac_ct_F77$ac_delim
-+LIBTOOL!$LIBTOOL$ac_delim
-+MY_CFLAGS!$MY_CFLAGS$ac_delim
-+UNWINDLIBS!$UNWINDLIBS$ac_delim
-+USE_LIBDIR_TRUE!$USE_LIBDIR_TRUE$ac_delim
-+USE_LIBDIR_FALSE!$USE_LIBDIR_FALSE$ac_delim
-+LIB@&t at OBJS!$LIB@&t at OBJS$ac_delim
-+LTLIBOBJS!$LTLIBOBJS$ac_delim
-+_ACEOF
-+
-+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 38; then
-+ break
-+ elif $ac_last_try; then
-+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+ fi
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+ ac_eof=`expr $ac_eof + 1`
-+fi
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-+_ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+:end
-+s/|#_!!_#|//g
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/
-+s/:*\${srcdir}:*/:/
-+s/:*@srcdir@:*/:/
-+s/^\([^=]*=[ ]*\):*/\1/
-+s/:*$//
-+s/^[^=]*=[ ]*$//
-+}'
-+fi
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+fi # test -n "$CONFIG_FILES"
-+
-+
-+for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS
-+do
-+ case $ac_tag in
-+ :[FHLC]) ac_mode=$ac_tag; continue;;
-+ esac
-+ case $ac_mode$ac_tag in
-+ :[FHL]*:*);;
-+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ :[FH]-) ac_tag=-:-;;
-+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-+ esac
-+ ac_save_IFS=$IFS
-+ IFS=:
-+ set x $ac_tag
-+ IFS=$ac_save_IFS
-+ shift
-+ ac_file=$1
-+ shift
-+
-+ case $ac_mode in
-+ :L) ac_source=$1;;
-+ :[FH])
-+ ac_file_inputs=
-+ for ac_f
-+ do
-+ case $ac_f in
-+ -) ac_f="$tmp/stdin";;
-+ *) # Look for the file first in the build tree, then in the source tree
-+ # (if the path is not absolute). The absolute path cannot be DOS-style,
-+ # because $ac_f cannot contain `:'.
-+ test -f "$ac_f" ||
-+ case $ac_f in
-+ [\\/$]*) false;;
-+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-+ esac ||
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
-+ ac_file_inputs="$ac_file_inputs $ac_f"
-+ done
-+
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ configure_input="Generated from "`IFS=:
-+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-+ if test x"$ac_file" != x-; then
-+ configure_input="$ac_file. $configure_input"
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ fi
-+
-+ case $ac_tag in
-+ *:-:* | *:-) cat >"$tmp/stdin";;
-+ esac
-+ ;;
-+ esac
-+
-+ ac_dir=`$as_dirname -- "$ac_file" ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ { as_dir="$ac_dir"
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-+ as_dirs=
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
-+ done
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+ ac_builddir=.
-+
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-+
-+case $srcdir in
-+ .) # We are building in place.
-+ ac_srcdir=.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+
-+ case $ac_mode in
-+ :F)
-+ #
-+ # CONFIG_FILE
-+ #
-+
-+ case $INSTALL in
-+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-+ esac
-+ ac_MKDIR_P=$MKDIR_P
-+ case $MKDIR_P in
-+ [\\/$]* | ?:[\\/]* ) ;;
-+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
-+ esac
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If the template does not know about datarootdir, expand it.
-+# FIXME: This hack should be removed a few years after 2.60.
-+ac_datarootdir_hack=; ac_datarootdir_seen=
-+
-+case `sed -n '/datarootdir/ {
-+ p
-+ q
-+}
-+/@datadir@/p
-+/@docdir@/p
-+/@infodir@/p
-+/@localedir@/p
-+/@mandir@/p
-+' $ac_file_inputs` in
-+*datarootdir*) ac_datarootdir_seen=yes;;
-+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ ac_datarootdir_hack='
-+ s&@datadir@&$datadir&g
-+ s&@docdir@&$docdir&g
-+ s&@infodir@&$infodir&g
-+ s&@localedir@&$localedir&g
-+ s&@mandir@&$mandir&g
-+ s&\\\${datarootdir}&$datarootdir&g' ;;
-+esac
-+_ACEOF
-+
-+# Neutralize VPATH when `$srcdir' = `.'.
-+# Shell code in configure.ac might set extrasub.
-+# FIXME: do we really want to maintain this feature?
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ sed "$ac_vpsub
-+$extrasub
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+:t
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+s&@configure_input@&$configure_input&;t t
-+s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@srcdir@&$ac_srcdir&;t t
-+s&@abs_srcdir@&$ac_abs_srcdir&;t t
-+s&@top_srcdir@&$ac_top_srcdir&;t t
-+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-+s&@builddir@&$ac_builddir&;t t
-+s&@abs_builddir@&$ac_abs_builddir&;t t
-+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-+s&@INSTALL@&$ac_INSTALL&;t t
-+s&@MKDIR_P@&$ac_MKDIR_P&;t t
-+$ac_datarootdir_hack
-+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-+
-+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&5
-+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&2;}
-+
-+ rm -f "$tmp/stdin"
-+ case $ac_file in
-+ -) cat "$tmp/out"; rm -f "$tmp/out";;
-+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-+ esac
-+ ;;
-+
-+
-+ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-+echo "$as_me: executing $ac_file commands" >&6;}
-+ ;;
-+ esac
-+
-+
-+ case $ac_file$ac_mode in
-+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-+ # Strip MF so we end up with the name of the file.
-+ mf=`echo "$mf" | sed -e 's/:.*$//'`
-+ # Check whether this is an Automake generated Makefile or not.
-+ # We used to match only the files named `Makefile.in', but
-+ # some people rename them; so instead we look at the file content.
-+ # Grep'ing the first line is not enough: some people post-process
-+ # each Makefile.in and add a new line on top of each file to say so.
-+ # Grep'ing the whole file is not good either: AIX grep has a line
-+ # limit of 2048, but all sed's we know have understand at least 4000.
-+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-+ dirpart=`$as_dirname -- "$mf" ||
-+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$mf" : 'X\(//\)[^/]' \| \
-+ X"$mf" : 'X\(//\)$' \| \
-+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$mf" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ else
-+ continue
-+ fi
-+ # Extract the definition of DEPDIR, am__include, and am__quote
-+ # from the Makefile without running `make'.
-+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-+ test -z "$DEPDIR" && continue
-+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
-+ test -z "am__include" && continue
-+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-+ # When using ansi2knr, U may be empty or an underscore; expand it
-+ U=`sed -n 's/^U = //p' < "$mf"`
-+ # Find all dependency output files, they are included files with
-+ # $(DEPDIR) in their names. We invoke sed twice because it is the
-+ # simplest approach to changing $(DEPDIR) to its actual value in the
-+ # expansion.
-+ for file in `sed -n "
-+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-+ # Make sure the directory exists.
-+ test -f "$dirpart/$file" && continue
-+ fdir=`$as_dirname -- "$file" ||
-+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$file" : 'X\(//\)[^/]' \| \
-+ X"$file" : 'X\(//\)$' \| \
-+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ { as_dir=$dirpart/$fdir
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-+ as_dirs=
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
-+ done
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+ # echo "creating $dirpart/$file"
-+ echo '# dummy' > "$dirpart/$file"
-+ done
-+done
-+ ;;
-+
-+ esac
-+done # for ac_tag
-+
-+
-+{ (exit 0); exit 0; }
-+_ACEOF
-+chmod +x $CONFIG_STATUS
-+ac_clean_files=$ac_clean_files_save
-+
-+
-+# configure is writing to config.log, and then calls config.status.
-+# config.status does its own redirection, appending to config.log.
-+# Unfortunately, on DOS this fails, as config.log is still kept open
-+# by configure, so config.status won't be able to write to it; its
-+# output is simply discarded. So we exec the FD to /dev/null,
-+# effectively closing config.log, so it can be properly (re)opened and
-+# appended to by config.status. When coming back to configure, we
-+# need to make the FD available again.
-+if test "$no_create" != yes; then
-+ ac_cs_success=:
-+ ac_config_status_args=
-+ test "$silent" = yes &&
-+ ac_config_status_args="$ac_config_status_args --quiet"
-+ exec 5>/dev/null
-+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-+ exec 5>>config.log
-+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-+ # would make configure fail if this is the last instruction.
-+ $ac_cs_success || { (exit 1); exit 1; }
-+fi
-+
-diff -urNad mono-2.0.1~/libgc/autom4te.cache/output.1 mono-2.0.1/libgc/autom4te.cache/output.1
---- mono-2.0.1~/libgc/autom4te.cache/output.1 1970-01-01 01:00:00.000000000 +0100
-+++ mono-2.0.1/libgc/autom4te.cache/output.1 2008-11-11 23:29:25.000000000 +0100
-@@ -0,0 +1,22648 @@
-+@%:@! /bin/sh
-+@%:@ Guess values for system-dependent variables and create Makefiles.
-+@%:@ Generated by GNU Autoconf 2.61 for libgc-mono 6.6.
-+@%:@
-+@%:@ Report bugs to <Hans_Boehm at hp.com>.
-+@%:@
-+@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+@%:@ 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+@%:@ This configure script is free software; the Free Software Foundation
-+@%:@ gives unlimited permission to copy, distribute and modify it.
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+if test "x$CONFIG_SHELL" = x; then
-+ if (eval ":") 2>/dev/null; then
-+ as_have_required=yes
-+else
-+ as_have_required=no
-+fi
-+
-+ if test $as_have_required = yes && (eval ":
-+(as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+ as_lineno_1=\$LINENO
-+ as_lineno_2=\$LINENO
-+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-+") 2> /dev/null; then
-+ :
-+else
-+ as_candidate_shells=
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ case $as_dir in
-+ /*)
-+ for as_base in sh bash ksh sh5; do
-+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-+ done;;
-+ esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+ for as_shell in $as_candidate_shells $SHELL; do
-+ # Try only shells that exist, to save several forks.
-+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+ { ("$as_shell") 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+_ASEOF
-+}; then
-+ CONFIG_SHELL=$as_shell
-+ as_have_required=yes
-+ if { "$as_shell" 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+(as_func_return () {
-+ (exit $1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = "$1" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test $exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-+
-+_ASEOF
-+}; then
-+ break
-+fi
-+
-+fi
-+
-+ done
-+
-+ if test "x$CONFIG_SHELL" != x; then
-+ for as_var in BASH_ENV ENV
-+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ done
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+fi
-+
-+
-+ if test $as_have_required = no; then
-+ echo This script requires a shell more modern than all the
-+ echo shells that I found on your system. Please install a
-+ echo modern shell, or manually run the script under such a
-+ echo shell if you do have one.
-+ { (exit 1); exit 1; }
-+fi
-+
-+
-+fi
-+
-+fi
-+
-+
-+
-+(eval "as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0") || {
-+ echo No shell found that supports shell functions.
-+ echo Please tell autoconf at gnu.org about your system,
-+ echo including any error possibly output before this
-+ echo message
-+}
-+
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
-+ sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
-+ N
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-+ t loop
-+ s/-\n.*//
-+ ' >$as_me.lineno &&
-+ chmod +x "$as_me.lineno" ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+ as_ln_s='cp -p'
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ test -d ./-p && rmdir ./-p
-+ as_mkdir_p=false
-+fi
-+
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+
-+
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+ # Remove one level of quotation (which was required for Make).
-+ ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-+ ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X$1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+elif test "X$1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+ # Yippee, $echo works!
-+ :
-+else
-+ # Restart under the correct shell.
-+ exec $SHELL "$0" --no-reexec ${1+"$@"}
-+fi
-+
-+if test "X$1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+$*
-+EOF
-+ exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-+ echo_test_string=`eval $cmd` &&
-+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+ then
-+ break
-+ fi
-+ done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ :
-+else
-+ # The Solaris, AIX, and Digital Unix default echo programs unquote
-+ # backslashes. This makes it impossible to quote backslashes using
-+ # echo "$something" | sed 's/\\/\\\\/g'
-+ #
-+ # So, first we look for a working echo in the user's PATH.
-+
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for dir in $PATH /usr/ucb; do
-+ IFS="$lt_save_ifs"
-+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$dir/echo"
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ if test "X$echo" = Xecho; then
-+ # We didn't find a better echo, so look for alternatives.
-+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # This shell has a builtin print -r that does the trick.
-+ echo='print -r'
-+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+ test "X$CONFIG_SHELL" != X/bin/ksh; then
-+ # If we have ksh, try running configure again with it.
-+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+ export ORIGINAL_CONFIG_SHELL
-+ CONFIG_SHELL=/bin/ksh
-+ export CONFIG_SHELL
-+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-+ else
-+ # Try using printf.
-+ echo='printf %s\n'
-+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # Cool, printf works
-+ :
-+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+ export CONFIG_SHELL
-+ SHELL="$CONFIG_SHELL"
-+ export SHELL
-+ echo="$CONFIG_SHELL $0 --fallback-echo"
-+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$CONFIG_SHELL $0 --fallback-echo"
-+ else
-+ # maybe with a smaller string...
-+ prev=:
-+
-+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+ then
-+ break
-+ fi
-+ prev="$cmd"
-+ done
-+
-+ if test "$prev" != 'sed 50q "$0"'; then
-+ echo_test_string=`eval $prev`
-+ export echo_test_string
-+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-+ else
-+ # Oops. We lost completely, so just stick with echo.
-+ echo=echo
-+ fi
-+ fi
-+ fi
-+ fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-+ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-+fi
-+
-+
-+
-+
-+tagnames=${tagnames+${tagnames},}CXX
-+
-+tagnames=${tagnames+${tagnames},}F77
-+
-+exec 7<&0 </dev/null 6>&1
-+
-+# Name of the host.
-+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# so uname gets run too.
-+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-+
-+#
-+# Initializations.
-+#
-+ac_default_prefix=/usr/local
-+ac_clean_files=
-+ac_config_libobj_dir=.
-+LIB@&t at OBJS=
-+cross_compiling=no
-+subdirs=
-+MFLAGS=
-+MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+# Identity of this package.
-+PACKAGE_NAME='libgc-mono'
-+PACKAGE_TARNAME='libgc-mono'
-+PACKAGE_VERSION='6.6'
-+PACKAGE_STRING='libgc-mono 6.6'
-+PACKAGE_BUGREPORT='Hans_Boehm at hp.com'
-+
-+ac_unique_file="gcj_mlc.c"
-+# Factoring default headers for most tests.
-+ac_includes_default="\
-+#include <stdio.h>
-+#ifdef HAVE_SYS_TYPES_H
-+# include <sys/types.h>
-+#endif
-+#ifdef HAVE_SYS_STAT_H
-+# include <sys/stat.h>
-+#endif
-+#ifdef STDC_HEADERS
-+# include <stdlib.h>
-+# include <stddef.h>
-+#else
-+# ifdef HAVE_STDLIB_H
-+# include <stdlib.h>
-+# endif
-+#endif
-+#ifdef HAVE_STRING_H
-+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-+# include <memory.h>
-+# endif
-+# include <string.h>
-+#endif
-+#ifdef HAVE_STRINGS_H
-+# include <strings.h>
-+#endif
-+#ifdef HAVE_INTTYPES_H
-+# include <inttypes.h>
-+#endif
-+#ifdef HAVE_STDINT_H
-+# include <stdint.h>
-+#endif
-+#ifdef HAVE_UNISTD_H
-+# include <unistd.h>
-+#endif"
-+
-+ac_subst_vars='SHELL
-+PATH_SEPARATOR
-+PACKAGE_NAME
-+PACKAGE_TARNAME
-+PACKAGE_VERSION
-+PACKAGE_STRING
-+PACKAGE_BUGREPORT
-+exec_prefix
-+prefix
-+program_transform_name
-+bindir
-+sbindir
-+libexecdir
-+datarootdir
-+datadir
-+sysconfdir
-+sharedstatedir
-+localstatedir
-+includedir
-+oldincludedir
-+docdir
-+infodir
-+htmldir
-+dvidir
-+pdfdir
-+psdir
-+libdir
-+localedir
-+mandir
-+DEFS
-+ECHO_C
-+ECHO_N
-+ECHO_T
-+LIBS
-+build_alias
-+host_alias
-+target_alias
-+INSTALL_PROGRAM
-+INSTALL_SCRIPT
-+INSTALL_DATA
-+am__isrc
-+CYGPATH_W
-+PACKAGE
-+VERSION
-+ACLOCAL
-+AUTOCONF
-+AUTOMAKE
-+AUTOHEADER
-+MAKEINFO
-+install_sh
-+STRIP
-+INSTALL_STRIP_PROGRAM
-+mkdir_p
-+AWK
-+SET_MAKE
-+am__leading_dot
-+AMTAR
-+am__tar
-+am__untar
-+build
-+build_cpu
-+build_vendor
-+build_os
-+host
-+host_cpu
-+host_vendor
-+host_os
-+GC_VERSION
-+CC
-+CFLAGS
-+LDFLAGS
-+CPPFLAGS
-+ac_ct_CC
-+EXEEXT
-+OBJEXT
-+DEPDIR
-+am__include
-+am__quote
-+AMDEP_TRUE
-+AMDEP_FALSE
-+AMDEPBACKSLASH
-+CCDEPMODE
-+am__fastdepCC_TRUE
-+am__fastdepCC_FALSE
-+CXX
-+CXXFLAGS
-+ac_ct_CXX
-+CXXDEPMODE
-+am__fastdepCXX_TRUE
-+am__fastdepCXX_FALSE
-+CCAS
-+CCASFLAGS
-+CCASDEPMODE
-+am__fastdepCCAS_TRUE
-+am__fastdepCCAS_FALSE
-+AR
-+RANLIB
-+MAINTAINER_MODE_TRUE
-+MAINTAINER_MODE_FALSE
-+MAINT
-+GC_CFLAGS
-+THREADDLLIBS
-+POWERPC_DARWIN_TRUE
-+POWERPC_DARWIN_FALSE
-+COMPILER_XLC_TRUE
-+COMPILER_XLC_FALSE
-+EXTRA_TEST_LIBS
-+target_all
-+CPLUSPLUS_TRUE
-+CPLUSPLUS_FALSE
-+INCLUDES
-+CXXINCLUDES
-+addobjs
-+addincludes
-+addlibs
-+addtests
-+SED
-+GREP
-+EGREP
-+LN_S
-+ECHO
-+DSYMUTIL
-+NMEDIT
-+CPP
-+CXXCPP
-+F77
-+FFLAGS
-+ac_ct_F77
-+LIBTOOL
-+MY_CFLAGS
-+UNWINDLIBS
-+USE_LIBDIR_TRUE
-+USE_LIBDIR_FALSE
-+LIB@&t at OBJS
-+LTLIBOBJS'
-+ac_subst_files=''
-+ ac_precious_vars='build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+LIBS
-+CPPFLAGS
-+CXX
-+CXXFLAGS
-+CCC
-+CCAS
-+CCASFLAGS
-+CPP
-+CXXCPP
-+F77
-+FFLAGS'
-+
-+
-+# Initialize some variables set by options.
-+ac_init_help=
-+ac_init_version=false
-+# The variables have the same names as the options, with
-+# dashes changed to underlines.
-+cache_file=/dev/null
-+exec_prefix=NONE
-+no_create=
-+no_recursion=
-+prefix=NONE
-+program_prefix=NONE
-+program_suffix=NONE
-+program_transform_name=s,x,x,
-+silent=
-+site=
-+srcdir=
-+verbose=
-+x_includes=NONE
-+x_libraries=NONE
-+
-+# Installation directory options.
-+# These are left unexpanded so users can "make install exec_prefix=/foo"
-+# and all the variables that are supposed to be based on exec_prefix
-+# by default will actually change.
-+# Use braces instead of parens because sh, perl, etc. also accept them.
-+# (The list follows the same order as the GNU Coding Standards.)
-+bindir='${exec_prefix}/bin'
-+sbindir='${exec_prefix}/sbin'
-+libexecdir='${exec_prefix}/libexec'
-+datarootdir='${prefix}/share'
-+datadir='${datarootdir}'
-+sysconfdir='${prefix}/etc'
-+sharedstatedir='${prefix}/com'
-+localstatedir='${prefix}/var'
-+includedir='${prefix}/include'
-+oldincludedir='/usr/include'
-+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-+infodir='${datarootdir}/info'
-+htmldir='${docdir}'
-+dvidir='${docdir}'
-+pdfdir='${docdir}'
-+psdir='${docdir}'
-+libdir='${exec_prefix}/lib'
-+localedir='${datarootdir}/locale'
-+mandir='${datarootdir}/man'
-+
-+ac_prev=
-+ac_dashdash=
-+for ac_option
-+do
-+ # If the previous option needs an argument, assign it.
-+ if test -n "$ac_prev"; then
-+ eval $ac_prev=\$ac_option
-+ ac_prev=
-+ continue
-+ fi
-+
-+ case $ac_option in
-+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-+ *) ac_optarg=yes ;;
-+ esac
-+
-+ # Accept the important Cygnus configure options, so we can diagnose typos.
-+
-+ case $ac_dashdash$ac_option in
-+ --)
-+ ac_dashdash=yes ;;
-+
-+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
-+ ac_prev=bindir ;;
-+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-+ bindir=$ac_optarg ;;
-+
-+ -build | --build | --buil | --bui | --bu)
-+ ac_prev=build_alias ;;
-+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-+ build_alias=$ac_optarg ;;
-+
-+ -cache-file | --cache-file | --cache-fil | --cache-fi \
-+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-+ ac_prev=cache_file ;;
-+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-+ cache_file=$ac_optarg ;;
-+
-+ --config-cache | -C)
-+ cache_file=config.cache ;;
-+
-+ -datadir | --datadir | --datadi | --datad)
-+ ac_prev=datadir ;;
-+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
-+ datadir=$ac_optarg ;;
-+
-+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-+ | --dataroo | --dataro | --datar)
-+ ac_prev=datarootdir ;;
-+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-+ datarootdir=$ac_optarg ;;
-+
-+ -disable-* | --disable-*)
-+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=no ;;
-+
-+ -docdir | --docdir | --docdi | --doc | --do)
-+ ac_prev=docdir ;;
-+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-+ docdir=$ac_optarg ;;
-+
-+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-+ ac_prev=dvidir ;;
-+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-+ dvidir=$ac_optarg ;;
-+
-+ -enable-* | --enable-*)
-+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=\$ac_optarg ;;
-+
-+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-+ | --exec | --exe | --ex)
-+ ac_prev=exec_prefix ;;
-+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-+ | --exec=* | --exe=* | --ex=*)
-+ exec_prefix=$ac_optarg ;;
-+
-+ -gas | --gas | --ga | --g)
-+ # Obsolete; use --with-gas.
-+ with_gas=yes ;;
-+
-+ -help | --help | --hel | --he | -h)
-+ ac_init_help=long ;;
-+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-+ ac_init_help=recursive ;;
-+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-+ ac_init_help=short ;;
-+
-+ -host | --host | --hos | --ho)
-+ ac_prev=host_alias ;;
-+ -host=* | --host=* | --hos=* | --ho=*)
-+ host_alias=$ac_optarg ;;
-+
-+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-+ ac_prev=htmldir ;;
-+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-+ | --ht=*)
-+ htmldir=$ac_optarg ;;
-+
-+ -includedir | --includedir | --includedi | --included | --include \
-+ | --includ | --inclu | --incl | --inc)
-+ ac_prev=includedir ;;
-+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-+ | --includ=* | --inclu=* | --incl=* | --inc=*)
-+ includedir=$ac_optarg ;;
-+
-+ -infodir | --infodir | --infodi | --infod | --info | --inf)
-+ ac_prev=infodir ;;
-+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-+ infodir=$ac_optarg ;;
-+
-+ -libdir | --libdir | --libdi | --libd)
-+ ac_prev=libdir ;;
-+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
-+ libdir=$ac_optarg ;;
-+
-+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-+ | --libexe | --libex | --libe)
-+ ac_prev=libexecdir ;;
-+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-+ | --libexe=* | --libex=* | --libe=*)
-+ libexecdir=$ac_optarg ;;
-+
-+ -localedir | --localedir | --localedi | --localed | --locale)
-+ ac_prev=localedir ;;
-+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-+ localedir=$ac_optarg ;;
-+
-+ -localstatedir | --localstatedir | --localstatedi | --localstated \
-+ | --localstate | --localstat | --localsta | --localst | --locals)
-+ ac_prev=localstatedir ;;
-+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-+ localstatedir=$ac_optarg ;;
-+
-+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-+ ac_prev=mandir ;;
-+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-+ mandir=$ac_optarg ;;
-+
-+ -nfp | --nfp | --nf)
-+ # Obsolete; use --without-fp.
-+ with_fp=no ;;
-+
-+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-+ | --no-cr | --no-c | -n)
-+ no_create=yes ;;
-+
-+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-+ no_recursion=yes ;;
-+
-+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-+ | --oldin | --oldi | --old | --ol | --o)
-+ ac_prev=oldincludedir ;;
-+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-+ oldincludedir=$ac_optarg ;;
-+
-+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-+ ac_prev=prefix ;;
-+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-+ prefix=$ac_optarg ;;
-+
-+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
-+ | --program-pre | --program-pr | --program-p)
-+ ac_prev=program_prefix ;;
-+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
-+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-+ program_prefix=$ac_optarg ;;
-+
-+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
-+ | --program-suf | --program-su | --program-s)
-+ ac_prev=program_suffix ;;
-+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
-+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-+ program_suffix=$ac_optarg ;;
-+
-+ -program-transform-name | --program-transform-name \
-+ | --program-transform-nam | --program-transform-na \
-+ | --program-transform-n | --program-transform- \
-+ | --program-transform | --program-transfor \
-+ | --program-transfo | --program-transf \
-+ | --program-trans | --program-tran \
-+ | --progr-tra | --program-tr | --program-t)
-+ ac_prev=program_transform_name ;;
-+ -program-transform-name=* | --program-transform-name=* \
-+ | --program-transform-nam=* | --program-transform-na=* \
-+ | --program-transform-n=* | --program-transform-=* \
-+ | --program-transform=* | --program-transfor=* \
-+ | --program-transfo=* | --program-transf=* \
-+ | --program-trans=* | --program-tran=* \
-+ | --progr-tra=* | --program-tr=* | --program-t=*)
-+ program_transform_name=$ac_optarg ;;
-+
-+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-+ ac_prev=pdfdir ;;
-+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-+ pdfdir=$ac_optarg ;;
-+
-+ -psdir | --psdir | --psdi | --psd | --ps)
-+ ac_prev=psdir ;;
-+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-+ psdir=$ac_optarg ;;
-+
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil)
-+ silent=yes ;;
-+
-+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-+ ac_prev=sbindir ;;
-+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-+ | --sbi=* | --sb=*)
-+ sbindir=$ac_optarg ;;
-+
-+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
-+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-+ | --sharedst | --shareds | --shared | --share | --shar \
-+ | --sha | --sh)
-+ ac_prev=sharedstatedir ;;
-+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-+ | --sha=* | --sh=*)
-+ sharedstatedir=$ac_optarg ;;
-+
-+ -site | --site | --sit)
-+ ac_prev=site ;;
-+ -site=* | --site=* | --sit=*)
-+ site=$ac_optarg ;;
-+
-+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-+ ac_prev=srcdir ;;
-+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-+ srcdir=$ac_optarg ;;
-+
-+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-+ | --syscon | --sysco | --sysc | --sys | --sy)
-+ ac_prev=sysconfdir ;;
-+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-+ sysconfdir=$ac_optarg ;;
-+
-+ -target | --target | --targe | --targ | --tar | --ta | --t)
-+ ac_prev=target_alias ;;
-+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-+ target_alias=$ac_optarg ;;
-+
-+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
-+ verbose=yes ;;
-+
-+ -version | --version | --versio | --versi | --vers | -V)
-+ ac_init_version=: ;;
-+
-+ -with-* | --with-*)
-+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=\$ac_optarg ;;
-+
-+ -without-* | --without-*)
-+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=no ;;
-+
-+ --x)
-+ # Obsolete; use --with-x.
-+ with_x=yes ;;
-+
-+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-+ | --x-incl | --x-inc | --x-in | --x-i)
-+ ac_prev=x_includes ;;
-+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-+ x_includes=$ac_optarg ;;
-+
-+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
-+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-+ ac_prev=x_libraries ;;
-+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-+ x_libraries=$ac_optarg ;;
-+
-+ -*) { echo "$as_me: error: unrecognized option: $ac_option
-+Try \`$0 --help' for more information." >&2
-+ { (exit 1); exit 1; }; }
-+ ;;
-+
-+ *=*)
-+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+ { (exit 1); exit 1; }; }
-+ eval $ac_envvar=\$ac_optarg
-+ export $ac_envvar ;;
-+
-+ *)
-+ # FIXME: should be removed in autoconf 3.0.
-+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-+ ;;
-+
-+ esac
-+done
-+
-+if test -n "$ac_prev"; then
-+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-+ { echo "$as_me: error: missing argument to $ac_option" >&2
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+# Be sure to have absolute directory names.
-+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
-+ datadir sysconfdir sharedstatedir localstatedir includedir \
-+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-+ libdir localedir mandir
-+do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* ) continue;;
-+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-+ esac
-+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; }
-+done
-+
-+# There might be people who depend on the old broken behavior: `$host'
-+# used to hold the argument of --host etc.
-+# FIXME: To remove some day.
-+build=$build_alias
-+host=$host_alias
-+target=$target_alias
-+
-+# FIXME: To remove some day.
-+if test "x$host_alias" != x; then
-+ if test "x$build_alias" = x; then
-+ cross_compiling=maybe
-+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+ If a cross compiler is detected then cross compile mode will be used." >&2
-+ elif test "x$build_alias" != "x$host_alias"; then
-+ cross_compiling=yes
-+ fi
-+fi
-+
-+ac_tool_prefix=
-+test -n "$host_alias" && ac_tool_prefix=$host_alias-
-+
-+test "$silent" = yes && exec 6>/dev/null
-+
-+
-+ac_pwd=`pwd` && test -n "$ac_pwd" &&
-+ac_ls_di=`ls -di .` &&
-+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-+ { echo "$as_me: error: Working directory cannot be determined" >&2
-+ { (exit 1); exit 1; }; }
-+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-+ { echo "$as_me: error: pwd does not report name of working directory" >&2
-+ { (exit 1); exit 1; }; }
-+
-+
-+# Find the source files, if location was not specified.
-+if test -z "$srcdir"; then
-+ ac_srcdir_defaulted=yes
-+ # Try the directory containing this script, then the parent directory.
-+ ac_confdir=`$as_dirname -- "$0" ||
-+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$0" : 'X\(//\)[^/]' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$0" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ srcdir=$ac_confdir
-+ if test ! -r "$srcdir/$ac_unique_file"; then
-+ srcdir=..
-+ fi
-+else
-+ ac_srcdir_defaulted=no
-+fi
-+if test ! -r "$srcdir/$ac_unique_file"; then
-+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { (exit 1); exit 1; }; }
-+fi
-+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-+ac_abs_confdir=`(
-+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-+ { (exit 1); exit 1; }; }
-+ pwd)`
-+# When building in place, set srcdir=.
-+if test "$ac_abs_confdir" = "$ac_pwd"; then
-+ srcdir=.
-+fi
-+# Remove unnecessary trailing slashes from srcdir.
-+# Double slashes in file names in object file debugging info
-+# mess up M-x gdb in Emacs.
-+case $srcdir in
-+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-+esac
-+for ac_var in $ac_precious_vars; do
-+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_env_${ac_var}_value=\$${ac_var}
-+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
-+done
-+
-+#
-+# Report the --help message.
-+#
-+if test "$ac_init_help" = "long"; then
-+ # Omit some internal or obsolete options to make the list less imposing.
-+ # This message is too long to be a string in the A/UX 3.1 sh.
-+ cat <<_ACEOF
-+\`configure' configures libgc-mono 6.6 to adapt to many kinds of systems.
-+
-+Usage: $0 [OPTION]... [VAR=VALUE]...
-+
-+To assign environment variables (e.g., CC, CFLAGS...), specify them as
-+VAR=VALUE. See below for descriptions of some of the useful variables.
-+
-+Defaults for the options are specified in brackets.
-+
-+Configuration:
-+ -h, --help display this help and exit
-+ --help=short display options specific to this package
-+ --help=recursive display the short help of all the included packages
-+ -V, --version display version information and exit
-+ -q, --quiet, --silent do not print \`checking...' messages
-+ --cache-file=FILE cache test results in FILE [disabled]
-+ -C, --config-cache alias for \`--cache-file=config.cache'
-+ -n, --no-create do not create output files
-+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
-+
-+Installation directories:
-+ --prefix=PREFIX install architecture-independent files in PREFIX
-+ [$ac_default_prefix]
-+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-+ [PREFIX]
-+
-+By default, \`make install' will install all the files in
-+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-+for instance \`--prefix=\$HOME'.
-+
-+For better control, use the options below.
-+
-+Fine tuning of the installation directories:
-+ --bindir=DIR user executables [EPREFIX/bin]
-+ --sbindir=DIR system admin executables [EPREFIX/sbin]
-+ --libexecdir=DIR program executables [EPREFIX/libexec]
-+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-+ --libdir=DIR object code libraries [EPREFIX/lib]
-+ --includedir=DIR C header files [PREFIX/include]
-+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
-+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
-+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
-+ --infodir=DIR info documentation [DATAROOTDIR/info]
-+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
-+ --mandir=DIR man documentation [DATAROOTDIR/man]
-+ --docdir=DIR documentation root @<:@DATAROOTDIR/doc/libgc-mono@:>@
-+ --htmldir=DIR html documentation [DOCDIR]
-+ --dvidir=DIR dvi documentation [DOCDIR]
-+ --pdfdir=DIR pdf documentation [DOCDIR]
-+ --psdir=DIR ps documentation [DOCDIR]
-+_ACEOF
-+
-+ cat <<\_ACEOF
-+
-+Program names:
-+ --program-prefix=PREFIX prepend PREFIX to installed program names
-+ --program-suffix=SUFFIX append SUFFIX to installed program names
-+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-+
-+System types:
-+ --build=BUILD configure for building on BUILD [guessed]
-+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
-+_ACEOF
-+fi
-+
-+if test -n "$ac_init_help"; then
-+ case $ac_init_help in
-+ short | recursive ) echo "Configuration of libgc-mono 6.6:";;
-+ esac
-+ cat <<\_ACEOF
-+
-+Optional Features:
-+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-+ --disable-dependency-tracking speeds up one-time build
-+ --enable-dependency-tracking do not reject slow dependency extractors
-+ --enable-maintainer-mode enable make rules and dependencies not useful
-+ (and sometimes confusing) to the casual installer
-+ --enable-win32-dllmain Define the DllMain function in win32_threads.c even if the collector is not built as a dll
-+ --enable-parallel-mark parallelize marking and free list construction
-+ --enable-cplusplus install C++ support
-+ --enable-shared@<:@=PKGS@:>@ build shared libraries @<:@default=yes@:>@
-+ --enable-static@<:@=PKGS@:>@ build static libraries @<:@default=yes@:>@
-+ --enable-fast-install@<:@=PKGS@:>@
-+ optimize for fast installation @<:@default=yes@:>@
-+ --disable-libtool-lock avoid locking (might break parallel builds)
-+ --enable-full-debug include full support for pointer backtracing etc.
-+ --enable-redirect-malloc redirect malloc and friends to GC routines
-+ --enable-gc-assertions collector-internal assertion checking
-+
-+Optional Packages:
-+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-+ --with-ecos enable runtime eCos target support
-+ --with-gnu-ld assume the C compiler uses GNU ld @<:@default=no@:>@
-+ --with-pic try to use only PIC/non-PIC objects @<:@default=use
-+ both@:>@
-+ --with-tags@<:@=TAGS@:>@ include additional configurations @<:@automatic@:>@
-+ --with-target-subdir=SUBDIR
-+ configuring with a cross compiler
-+ --with-cross-host=HOST configuring with a cross compiler
-+
-+Some influential environment variables:
-+ CC C compiler command
-+ CFLAGS C compiler flags
-+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
-+ nonstandard directory <lib dir>
-+ LIBS libraries to pass to the linker, e.g. -l<library>
-+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-+ you have headers in a nonstandard directory <include dir>
-+ CXX C++ compiler command
-+ CXXFLAGS C++ compiler flags
-+ CCAS assembler compiler command (defaults to CC)
-+ CCASFLAGS assembler compiler flags (defaults to CFLAGS)
-+ CPP C preprocessor
-+ CXXCPP C++ preprocessor
-+ F77 Fortran 77 compiler command
-+ FFLAGS Fortran 77 compiler flags
-+
-+Use these variables to override the choices made by `configure' or to help
-+it to find libraries and programs with nonstandard names/locations.
-+
-+Report bugs to <Hans_Boehm at hp.com>.
-+_ACEOF
-+ac_status=$?
-+fi
-+
-+if test "$ac_init_help" = "recursive"; then
-+ # If there are subdirs, report their specific --help.
-+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-+ test -d "$ac_dir" || continue
-+ ac_builddir=.
-+
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-+
-+case $srcdir in
-+ .) # We are building in place.
-+ ac_srcdir=.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+ cd "$ac_dir" || { ac_status=$?; continue; }
-+ # Check for guested configure.
-+ if test -f "$ac_srcdir/configure.gnu"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-+ elif test -f "$ac_srcdir/configure"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure" --help=recursive
-+ else
-+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+ fi || ac_status=$?
-+ cd "$ac_pwd" || { ac_status=$?; break; }
-+ done
-+fi
-+
-+test -n "$ac_init_help" && exit $ac_status
-+if $ac_init_version; then
-+ cat <<\_ACEOF
-+libgc-mono configure 6.6
-+generated by GNU Autoconf 2.61
-+
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+ exit
-+fi
-+cat >config.log <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+
-+It was created by libgc-mono $as_me 6.6, which was
-+generated by GNU Autoconf 2.61. Invocation command line was
-+
-+ $ $0 $@
-+
-+_ACEOF
-+exec 5>>config.log
-+{
-+cat <<_ASUNAME
-+@%:@@%:@ --------- @%:@@%:@
-+@%:@@%:@ Platform. @%:@@%:@
-+@%:@@%:@ --------- @%:@@%:@
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-+
-+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-+
-+_ASUNAME
-+
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ echo "PATH: $as_dir"
-+done
-+IFS=$as_save_IFS
-+
-+} >&5
-+
-+cat >&5 <<_ACEOF
-+
-+
-+@%:@@%:@ ----------- @%:@@%:@
-+@%:@@%:@ Core tests. @%:@@%:@
-+@%:@@%:@ ----------- @%:@@%:@
-+
-+_ACEOF
-+
-+
-+# Keep a trace of the command line.
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Strip out --silent because we don't want to record it for future runs.
-+# Also quote any args containing shell meta-characters.
-+# Make two passes to allow for proper duplicate-argument suppression.
-+ac_configure_args=
-+ac_configure_args0=
-+ac_configure_args1=
-+ac_must_keep_next=false
-+for ac_pass in 1 2
-+do
-+ for ac_arg
-+ do
-+ case $ac_arg in
-+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil)
-+ continue ;;
-+ *\'*)
-+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ esac
-+ case $ac_pass in
-+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+ 2)
-+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+ if test $ac_must_keep_next = true; then
-+ ac_must_keep_next=false # Got value, back to normal.
-+ else
-+ case $ac_arg in
-+ *=* | --config-cache | -C | -disable-* | --disable-* \
-+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-+ | -with-* | --with-* | -without-* | --without-* | --x)
-+ case "$ac_configure_args0 " in
-+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-+ esac
-+ ;;
-+ -* ) ac_must_keep_next=true ;;
-+ esac
-+ fi
-+ ac_configure_args="$ac_configure_args '$ac_arg'"
-+ ;;
-+ esac
-+ done
-+done
-+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+
-+# When interrupted or exit'd, cleanup temporary files, and complete
-+# config.log. We remove comments because anyway the quotes in there
-+# would cause problems or look ugly.
-+# WARNING: Use '\'' to represent an apostrophe within the trap.
-+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-+trap 'exit_status=$?
-+ # Save into config.log some information that might help in debugging.
-+ {
-+ echo
-+
-+ cat <<\_ASBOX
-+@%:@@%:@ ---------------- @%:@@%:@
-+@%:@@%:@ Cache variables. @%:@@%:@
-+@%:@@%:@ ---------------- @%:@@%:@
-+_ASBOX
-+ echo
-+ # The following way of writing the cache mishandles newlines in values,
-+(
-+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
-+ (set) 2>&1 |
-+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
-+ sed -n \
-+ "s/'\''/'\''\\\\'\'''\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-+ ;; #(
-+ *)
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-+ ;;
-+ esac |
-+ sort
-+)
-+ echo
-+
-+ cat <<\_ASBOX
-+@%:@@%:@ ----------------- @%:@@%:@
-+@%:@@%:@ Output variables. @%:@@%:@
-+@%:@@%:@ ----------------- @%:@@%:@
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_vars
-+ do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
-+ done | sort
-+ echo
-+
-+ if test -n "$ac_subst_files"; then
-+ cat <<\_ASBOX
-+@%:@@%:@ ------------------- @%:@@%:@
-+@%:@@%:@ File substitutions. @%:@@%:@
-+@%:@@%:@ ------------------- @%:@@%:@
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_files
-+ do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
-+ done | sort
-+ echo
-+ fi
-+
-+ if test -s confdefs.h; then
-+ cat <<\_ASBOX
-+@%:@@%:@ ----------- @%:@@%:@
-+@%:@@%:@ confdefs.h. @%:@@%:@
-+@%:@@%:@ ----------- @%:@@%:@
-+_ASBOX
-+ echo
-+ cat confdefs.h
-+ echo
-+ fi
-+ test "$ac_signal" != 0 &&
-+ echo "$as_me: caught signal $ac_signal"
-+ echo "$as_me: exit $exit_status"
-+ } >&5
-+ rm -f core *.core core.conftest.* &&
-+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-+ exit $exit_status
-+' 0
-+for ac_signal in 1 2 13 15; do
-+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+done
-+ac_signal=0
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -f -r conftest* confdefs.h
-+
-+# Predefined preprocessor variables.
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_NAME "$PACKAGE_NAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_VERSION "$PACKAGE_VERSION"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_STRING "$PACKAGE_STRING"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-+_ACEOF
-+
-+
-+# Let the site file select an alternate cache file if it wants to.
-+# Prefer explicitly selected file to automatically selected ones.
-+if test -n "$CONFIG_SITE"; then
-+ set x "$CONFIG_SITE"
-+elif test "x$prefix" != xNONE; then
-+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
-+else
-+ set x "$ac_default_prefix/share/config.site" \
-+ "$ac_default_prefix/etc/config.site"
-+fi
-+shift
-+for ac_site_file
-+do
-+ if test -r "$ac_site_file"; then
-+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+echo "$as_me: loading site script $ac_site_file" >&6;}
-+ sed 's/^/| /' "$ac_site_file" >&5
-+ . "$ac_site_file"
-+ fi
-+done
-+
-+if test -r "$cache_file"; then
-+ # Some versions of bash will fail to source /dev/null (special
-+ # files actually), so we avoid doing that.
-+ if test -f "$cache_file"; then
-+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+echo "$as_me: loading cache $cache_file" >&6;}
-+ case $cache_file in
-+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
-+ *) . "./$cache_file";;
-+ esac
-+ fi
-+else
-+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+echo "$as_me: creating cache $cache_file" >&6;}
-+ >$cache_file
-+fi
-+
-+# Check that the precious variables saved in the cache have kept the same
-+# value.
-+ac_cache_corrupted=false
-+for ac_var in $ac_precious_vars; do
-+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
-+ eval ac_new_set=\$ac_env_${ac_var}_set
-+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
-+ eval ac_new_val=\$ac_env_${ac_var}_value
-+ case $ac_old_set,$ac_new_set in
-+ set,)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,set)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,);;
-+ *)
-+ if test "x$ac_old_val" != "x$ac_new_val"; then
-+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-+echo "$as_me: former value: $ac_old_val" >&2;}
-+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-+echo "$as_me: current value: $ac_new_val" >&2;}
-+ ac_cache_corrupted=:
-+ fi;;
-+ esac
-+ # Pass precious variables to config.status.
-+ if test "$ac_new_set" = set; then
-+ case $ac_new_val in
-+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *) ac_arg=$ac_var=$ac_new_val ;;
-+ esac
-+ case " $ac_configure_args " in
-+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
-+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+ esac
-+ fi
-+done
-+if $ac_cache_corrupted; then
-+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+am__api_version='1.10'
-+
-+ac_aux_dir=
-+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-+ if test -f "$ac_dir/install-sh"; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/install-sh -c"
-+ break
-+ elif test -f "$ac_dir/install.sh"; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/install.sh -c"
-+ break
-+ elif test -f "$ac_dir/shtool"; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/shtool install -c"
-+ break
-+ fi
-+done
-+if test -z "$ac_aux_dir"; then
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+# These three variables are undocumented and unsupported,
-+# and are intended to be withdrawn in a future Autoconf release.
-+# They can cause serious problems if a builder's source tree is in a directory
-+# whose full name contains unusual characters.
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-+
-+
-+# Find a good install program. We prefer a C program (faster),
-+# so one script is as good as another. But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
-+# ./install, which can be erroneously created by make from ./install.sh.
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+if test -z "$INSTALL"; then
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-+ if test $ac_prog = install &&
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # AIX install. It has an incompatible calling convention.
-+ :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
-+ else
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
-+ fi
-+ done
-+ done
-+ ;;
-+esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+ if test "${ac_cv_path_install+set}" = set; then
-+ INSTALL=$ac_cv_path_install
-+ else
-+ # As a last resort, use the slow shell script. Don't cache a
-+ # value for INSTALL within a source directory, because that will
-+ # break other packages using the cache if that directory is
-+ # removed, or if the value is a relative name.
-+ INSTALL=$ac_install_sh
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
-+# Just in case
-+sleep 1
-+echo timestamp > conftest.file
-+# Do `set' in a subshell so we don't clobber the current shell's
-+# arguments. Must try -L first in case configure is actually a
-+# symlink; some systems play weird games with the mod time of symlinks
-+# (eg FreeBSD returns the mod time of the symlink's containing
-+# directory).
-+if (
-+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-+ if test "$*" = "X"; then
-+ # -L didn't work.
-+ set X `ls -t $srcdir/configure conftest.file`
-+ fi
-+ rm -f conftest.file
-+ if test "$*" != "X $srcdir/configure conftest.file" \
-+ && test "$*" != "X conftest.file $srcdir/configure"; then
-+
-+ # If neither matched, then we have a broken ls. This can happen
-+ # if, for instance, CONFIG_SHELL is bash and it inherits a
-+ # broken ls alias from the environment. This has actually
-+ # happened. Such a system could not be considered "sane".
-+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&5
-+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+
-+ test "$2" = conftest.file
-+ )
-+then
-+ # Ok.
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-+Check your system clock" >&5
-+echo "$as_me: error: newly created file is older than distributed files!
-+Check your system clock" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+test "$program_prefix" != NONE &&
-+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
-+# Use a double $ so make ignores it.
-+test "$program_suffix" != NONE &&
-+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-+# Double any \ or $. echo might interpret backslashes.
-+# By default was `s,x,x', remove it if useless.
-+cat <<\_ACEOF >conftest.sed
-+s/[\\$]/&&/g;s/;s,x,x,$//
-+_ACEOF
-+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-+rm -f conftest.sed
-+
-+# expand $ac_aux_dir to an absolute path
-+am_aux_dir=`cd $ac_aux_dir && pwd`
-+
-+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-+# Use eval to expand $SHELL
-+if eval "$MISSING --run true"; then
-+ am_missing_run="$MISSING --run "
-+else
-+ am_missing_run=
-+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
-+if test -z "$MKDIR_P"; then
-+ if test "${ac_cv_path_mkdir+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in mkdir gmkdir; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
-+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-+ 'mkdir (GNU coreutils) '* | \
-+ 'mkdir (coreutils) '* | \
-+ 'mkdir (fileutils) '4.1*)
-+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
-+ break 3;;
-+ esac
-+ done
-+ done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+
-+ if test "${ac_cv_path_mkdir+set}" = set; then
-+ MKDIR_P="$ac_cv_path_mkdir -p"
-+ else
-+ # As a last resort, use the slow shell script. Don't cache a
-+ # value for MKDIR_P within a source directory, because that will
-+ # break other packages using the cache if that directory is
-+ # removed, or if the value is a relative name.
-+ test -d ./--version && rmdir ./--version
-+ MKDIR_P="$ac_install_sh -d"
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-+echo "${ECHO_T}$MKDIR_P" >&6; }
-+
-+mkdir_p="$MKDIR_P"
-+case $mkdir_p in
-+ [\\/$]* | ?:[\\/]*) ;;
-+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-+esac
-+
-+for ac_prog in gawk mawk nawk awk
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AWK+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$AWK"; then
-+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_AWK="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AWK=$ac_cv_prog_AWK
-+if test -n "$AWK"; then
-+ { echo "$as_me:$LINENO: result: $AWK" >&5
-+echo "${ECHO_T}$AWK" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$AWK" && break
-+done
-+
-+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.make <<\_ACEOF
-+SHELL = /bin/sh
-+all:
-+ @echo '@@@%%%=$(MAKE)=@@@%%%'
-+_ACEOF
-+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-+case `${MAKE-make} -f conftest.make 2>/dev/null` in
-+ *@@@%%%=?*=@@@%%%*)
-+ eval ac_cv_prog_make_${ac_make}_set=yes;;
-+ *)
-+ eval ac_cv_prog_make_${ac_make}_set=no;;
-+esac
-+rm -f conftest.make
-+fi
-+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+ SET_MAKE=
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+ SET_MAKE="MAKE=${MAKE-make}"
-+fi
-+
-+rm -rf .tst 2>/dev/null
-+mkdir .tst 2>/dev/null
-+if test -d .tst; then
-+ am__leading_dot=.
-+else
-+ am__leading_dot=_
-+fi
-+rmdir .tst 2>/dev/null
-+
-+if test "`cd $srcdir && pwd`" != "`pwd`"; then
-+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-+ # is not polluted with repeated "-I."
-+ am__isrc=' -I$(srcdir)'
-+ # test to see if srcdir already configured
-+ if test -f $srcdir/config.status; then
-+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+fi
-+
-+# test whether we have cygpath
-+if test -z "$CYGPATH_W"; then
-+ if (cygpath --version) >/dev/null 2>/dev/null; then
-+ CYGPATH_W='cygpath -w'
-+ else
-+ CYGPATH_W=echo
-+ fi
-+fi
-+
-+
-+# Define the identity of the package.
-+ PACKAGE=libgc-mono
-+ VERSION=6.6
-+
-+
-+# Some tools Automake needs.
-+
-+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-+
-+
-+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-+
-+
-+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-+
-+
-+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-+
-+
-+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-+
-+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-+
-+# Installed binaries are usually stripped using `strip' when the user
-+# run `make install-strip'. However `strip' might not be the right
-+# tool to use in cross-compilation environments, therefore Automake
-+# will honor the `STRIP' environment variable to overrule this program.
-+if test "$cross_compiling" != no; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$STRIP"; then
-+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+ { echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+ ac_ct_STRIP=$STRIP
-+ # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_STRIP"; then
-+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_STRIP="strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_STRIP" = x; then
-+ STRIP=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ STRIP=$ac_ct_STRIP
-+ fi
-+else
-+ STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+fi
-+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-+
-+# We need awk for the "check" target. The system "awk" is bad on
-+# some platforms.
-+# Always define AMTAR for backward compatibility.
-+
-+AMTAR=${AMTAR-"${am_missing_run}tar"}
-+
-+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-+
-+
-+
-+
-+
-+
-+
-+# Make sure we can run config.sub.
-+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+{ echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-+if test "${ac_cv_build+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_build_alias=$build_alias
-+test "x$ac_build_alias" = x &&
-+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-+test "x$ac_build_alias" = x &&
-+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-+ { (exit 1); exit 1; }; }
-+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6; }
-+case $ac_cv_build in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-+echo "$as_me: error: invalid value of canonical build" >&2;}
-+ { (exit 1); exit 1; }; };;
-+esac
-+build=$ac_cv_build
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_build
-+shift
-+build_cpu=$1
-+build_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+build_os=$*
-+IFS=$ac_save_IFS
-+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-+
-+
-+{ echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-+if test "${ac_cv_host+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "x$host_alias" = x; then
-+ ac_cv_host=$ac_cv_build
-+else
-+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6; }
-+case $ac_cv_host in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-+echo "$as_me: error: invalid value of canonical host" >&2;}
-+ { (exit 1); exit 1; }; };;
-+esac
-+host=$ac_cv_host
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_host
-+shift
-+host_cpu=$1
-+host_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+host_os=$*
-+IFS=$ac_save_IFS
-+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-+
-+
-+
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_CC="gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_CC="${ac_tool_prefix}cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ fi
-+fi
-+if test -z "$CC"; then
-+ # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+ ac_prog_rejected=no
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+ ac_prog_rejected=yes
-+ continue
-+ fi
-+ ac_cv_prog_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+if test $ac_prog_rejected = yes; then
-+ # We found a bogon in the path, so make sure we never use it.
-+ set dummy $ac_cv_prog_CC
-+ shift
-+ if test $@%:@ != 0; then
-+ # We chose a different compiler from the bogus one.
-+ # However, it has the same basename, so the bogon will be chosen
-+ # first if we set CC to just the basename; use the full file name.
-+ shift
-+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-+ fi
-+fi
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in cl.exe
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$CC" && break
-+ done
-+fi
-+if test -z "$CC"; then
-+ ac_ct_CC=$CC
-+ for ac_prog in cl.exe
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_CC="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$ac_ct_CC" && break
-+done
-+
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
-+fi
-+
-+fi
-+
-+
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+# Try to create an executable without -o first, disregard a.out.
-+# It will help us diagnose broken compilers, and finding out an intuition
-+# of exeext.
-+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+#
-+# List of possible output files, starting from the most likely.
-+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-+# only as a last resort. b.out is created by i960 compilers.
-+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-+#
-+# The IRIX 6 linker writes into existing files which may not be
-+# executable, retaining their permissions. Remove them first so a
-+# subsequent execution test works.
-+ac_rmfiles=
-+for ac_file in $ac_files
-+do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-+ esac
-+done
-+rm -f $ac_rmfiles
-+
-+if { (ac_try="$ac_link_default"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link_default") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-+# in a Makefile. We should not override ac_cv_exeext if it was cached,
-+# so that the user can short-circuit this test for compilers unknown to
-+# Autoconf.
-+for ac_file in $ac_files ''
-+do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
-+ ;;
-+ [ab].out )
-+ # We found the default executable, but exeext='' is most
-+ # certainly right.
-+ break;;
-+ *.* )
-+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+ then :; else
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ fi
-+ # We set ac_cv_exeext here because the later test for it is not
-+ # safe: cross compilers may not add the suffix if given an `-o'
-+ # argument, so we may need to know it at that point already.
-+ # Even if this section looks crufty: it has the advantage of
-+ # actually working.
-+ break;;
-+ * )
-+ break;;
-+ esac
-+done
-+test "$ac_cv_exeext" = no && ac_cv_exeext=
-+
-+else
-+ ac_file=''
-+fi
-+
-+{ echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6; }
-+if test -z "$ac_file"; then
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C compiler cannot create executables
-+See \`config.log' for more details." >&2;}
-+ { (exit 77); exit 77; }; }
-+fi
-+
-+ac_exeext=$ac_cv_exeext
-+
-+# Check that the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-+# If not cross compiling, check that we can run a simple program.
-+if test "$cross_compiling" != yes; then
-+ if { ac_try='./$ac_file'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ cross_compiling=no
-+ else
-+ if test "$cross_compiling" = maybe; then
-+ cross_compiling=yes
-+ else
-+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+
-+rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+ac_clean_files=$ac_clean_files_save
-+# Check that the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
-+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-+# work properly (i.e., refer to `conftest.exe'), while it won't with
-+# `rm'.
-+for ac_file in conftest.exe conftest conftest.*; do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ break;;
-+ * ) break;;
-+ esac
-+done
-+else
-+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest$ac_cv_exeext
-+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6; }
-+
-+rm -f conftest.$ac_ext
-+EXEEXT=$ac_cv_exeext
-+ac_exeext=$EXEEXT
-+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-+if test "${ac_cv_objext+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.o conftest.obj
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ for ac_file in conftest.o conftest.obj conftest.*; do
-+ test -f "$ac_file" || continue;
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
-+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-+ break;;
-+ esac
-+done
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest.$ac_cv_objext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6; }
-+OBJEXT=$ac_cv_objext
-+ac_objext=$OBJEXT
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_save_c_werror_flag=$ac_c_werror_flag
-+ ac_c_werror_flag=yes
-+ ac_cv_prog_cc_g=no
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ CFLAGS=""
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-+if test "$ac_test_CFLAGS" = set; then
-+ CFLAGS=$ac_save_CFLAGS
-+elif test $ac_cv_prog_cc_g = yes; then
-+ if test "$GCC" = yes; then
-+ CFLAGS="-g -O2"
-+ else
-+ CFLAGS="-g"
-+ fi
-+else
-+ if test "$GCC" = yes; then
-+ CFLAGS="-O2"
-+ else
-+ CFLAGS=
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_prog_cc_c89=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+ char **p;
-+ int i;
-+{
-+ return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+ char *s;
-+ va_list v;
-+ va_start (v,p);
-+ s = g (p, va_arg (v,int));
-+ va_end (v);
-+ return s;
-+}
-+
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
-+ function prototypes and stuff, but not '\xHH' hex character constants.
-+ These don't provoke an error unfortunately, instead are silently treated
-+ as 'x'. The following induces an error, until -std is added to get
-+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
-+ array size at least. It's necessary to write '\x00'==0 to get something
-+ that's true only with -std. */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+ inside strings and character constants. */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+ CC="$ac_save_CC $ac_arg"
-+ rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_c89=$ac_arg
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext
-+ test "x$ac_cv_prog_cc_c89" != "xno" && break
-+done
-+rm -f conftest.$ac_ext
-+CC=$ac_save_CC
-+
-+fi
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+ x)
-+ { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+ xno)
-+ { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
-+ *)
-+ CC="$CC $ac_cv_prog_cc_c89"
-+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-+esac
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+DEPDIR="${am__leading_dot}deps"
-+
-+ac_config_commands="$ac_config_commands depfiles"
-+
-+
-+am_make=${MAKE-make}
-+cat > confinc << 'END'
-+am__doit:
-+ @echo done
-+.PHONY: am__doit
-+END
-+# If we don't find an include directive, just comment out the code.
-+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-+am__include="#"
-+am__quote=
-+_am_result=none
-+# First try GNU make style include.
-+echo "include confinc" > confmf
-+# We grep out `Entering directory' and `Leaving directory'
-+# messages which can occur if `w' ends up in MAKEFLAGS.
-+# In particular we don't look at `^make:' because GNU make might
-+# be invoked under some other name (usually "gmake"), in which
-+# case it prints its new name instead of `make'.
-+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-+ am__include=include
-+ am__quote=
-+ _am_result=GNU
-+fi
-+# Now try BSD make style include.
-+if test "$am__include" = "#"; then
-+ echo '.include "confinc"' > confmf
-+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-+ am__include=.include
-+ am__quote="\""
-+ _am_result=BSD
-+ fi
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: result: $_am_result" >&5
-+echo "${ECHO_T}$_am_result" >&6; }
-+rm -f confinc confmf
-+
-+# Check whether --enable-dependency-tracking was given.
-+if test "${enable_dependency_tracking+set}" = set; then
-+ enableval=$enable_dependency_tracking;
-+fi
-+
-+if test "x$enable_dependency_tracking" != xno; then
-+ am_depcomp="$ac_aux_dir/depcomp"
-+ AMDEPBACKSLASH='\'
-+fi
-+ if test "x$enable_dependency_tracking" != xno; then
-+ AMDEP_TRUE=
-+ AMDEP_FALSE='#'
-+else
-+ AMDEP_TRUE='#'
-+ AMDEP_FALSE=
-+fi
-+
-+
-+
-+depcc="$CC" am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+ # We make a subdir and do the tests there. Otherwise we can end up
-+ # making bogus files that we don't know about and never remove. For
-+ # instance it was reported that on HP-UX the gcc test will end up
-+ # making a dummy file named `D' -- because `-MD' means `put the output
-+ # in D'.
-+ mkdir conftest.dir
-+ # Copy depcomp to subdir because otherwise we won't find it if we're
-+ # using a relative directory.
-+ cp "$am_depcomp" conftest.dir
-+ cd conftest.dir
-+ # We will build objects and dependencies in a subdirectory because
-+ # it helps to detect inapplicable dependency modes. For instance
-+ # both Tru64's cc and ICC support -MD to output dependencies as a
-+ # side effect of compilation, but ICC will put the dependencies in
-+ # the current directory while Tru64 will put them in the object
-+ # directory.
-+ mkdir sub
-+
-+ am_cv_CC_dependencies_compiler_type=none
-+ if test "$am_compiler_list" = ""; then
-+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+ fi
-+ for depmode in $am_compiler_list; do
-+ # Setup a source with many dependencies, because some compilers
-+ # like to wrap large dependency lists on column 80 (with \), and
-+ # we should not choose a depcomp mode which is confused by this.
-+ #
-+ # We need to recreate these files for each test, as the compiler may
-+ # overwrite some of them when testing with obscure command lines.
-+ # This happens at least with the AIX C compiler.
-+ : > sub/conftest.c
-+ for i in 1 2 3 4 5 6; do
-+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
-+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-+ # Solaris 8's {/usr,}/bin/sh.
-+ touch sub/conftst$i.h
-+ done
-+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-+
-+ case $depmode in
-+ nosideeffect)
-+ # after this tag, mechanisms are not by side-effect, so they'll
-+ # only be used when explicitly requested
-+ if test "x$enable_dependency_tracking" = xyes; then
-+ continue
-+ else
-+ break
-+ fi
-+ ;;
-+ none) break ;;
-+ esac
-+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+ # mode. It turns out that the SunPro C++ compiler does not properly
-+ # handle `-M -o', and we need to detect this.
-+ if depmode=$depmode \
-+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-+ >/dev/null 2>conftest.err &&
-+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+ # icc doesn't choke on unknown options, it will just issue warnings
-+ # or remarks (even with -Werror). So we grep stderr for any message
-+ # that says an option was ignored or not supported.
-+ # When given -MP, icc 7.0 and 7.1 complain thusly:
-+ # icc: Command line warning: ignoring option '-M'; no argument required
-+ # The diagnosis changed in icc 8.0:
-+ # icc: Command line remark: option '-MP' not supported
-+ if (grep 'ignoring option' conftest.err ||
-+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-+ am_cv_CC_dependencies_compiler_type=$depmode
-+ break
-+ fi
-+ fi
-+ done
-+
-+ cd ..
-+ rm -rf conftest.dir
-+else
-+ am_cv_CC_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-+
-+ if
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-+ am__fastdepCC_TRUE=
-+ am__fastdepCC_FALSE='#'
-+else
-+ am__fastdepCC_TRUE='#'
-+ am__fastdepCC_FALSE=
-+fi
-+
-+
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+if test -z "$CXX"; then
-+ if test -n "$CCC"; then
-+ CXX=$CCC
-+ else
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CXX"; then
-+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CXX=$ac_cv_prog_CXX
-+if test -n "$CXX"; then
-+ { echo "$as_me:$LINENO: result: $CXX" >&5
-+echo "${ECHO_T}$CXX" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$CXX" && break
-+ done
-+fi
-+if test -z "$CXX"; then
-+ ac_ct_CXX=$CXX
-+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CXX"; then
-+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_CXX="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-+if test -n "$ac_ct_CXX"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-+echo "${ECHO_T}$ac_ct_CXX" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$ac_ct_CXX" && break
-+done
-+
-+ if test "x$ac_ct_CXX" = x; then
-+ CXX="g++"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CXX=$ac_ct_CXX
-+ fi
-+fi
-+
-+ fi
-+fi
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-+GXX=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CXXFLAGS=${CXXFLAGS+set}
-+ac_save_CXXFLAGS=$CXXFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cxx_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-+ ac_cxx_werror_flag=yes
-+ ac_cv_prog_cxx_g=no
-+ CXXFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cxx_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ CXXFLAGS=""
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-+ CXXFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cxx_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-+if test "$ac_test_CXXFLAGS" = set; then
-+ CXXFLAGS=$ac_save_CXXFLAGS
-+elif test $ac_cv_prog_cxx_g = yes; then
-+ if test "$GXX" = yes; then
-+ CXXFLAGS="-g -O2"
-+ else
-+ CXXFLAGS="-g"
-+ fi
-+else
-+ if test "$GXX" = yes; then
-+ CXXFLAGS="-O2"
-+ else
-+ CXXFLAGS=
-+ fi
-+fi
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+depcc="$CXX" am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+ # We make a subdir and do the tests there. Otherwise we can end up
-+ # making bogus files that we don't know about and never remove. For
-+ # instance it was reported that on HP-UX the gcc test will end up
-+ # making a dummy file named `D' -- because `-MD' means `put the output
-+ # in D'.
-+ mkdir conftest.dir
-+ # Copy depcomp to subdir because otherwise we won't find it if we're
-+ # using a relative directory.
-+ cp "$am_depcomp" conftest.dir
-+ cd conftest.dir
-+ # We will build objects and dependencies in a subdirectory because
-+ # it helps to detect inapplicable dependency modes. For instance
-+ # both Tru64's cc and ICC support -MD to output dependencies as a
-+ # side effect of compilation, but ICC will put the dependencies in
-+ # the current directory while Tru64 will put them in the object
-+ # directory.
-+ mkdir sub
-+
-+ am_cv_CXX_dependencies_compiler_type=none
-+ if test "$am_compiler_list" = ""; then
-+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+ fi
-+ for depmode in $am_compiler_list; do
-+ # Setup a source with many dependencies, because some compilers
-+ # like to wrap large dependency lists on column 80 (with \), and
-+ # we should not choose a depcomp mode which is confused by this.
-+ #
-+ # We need to recreate these files for each test, as the compiler may
-+ # overwrite some of them when testing with obscure command lines.
-+ # This happens at least with the AIX C compiler.
-+ : > sub/conftest.c
-+ for i in 1 2 3 4 5 6; do
-+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
-+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-+ # Solaris 8's {/usr,}/bin/sh.
-+ touch sub/conftst$i.h
-+ done
-+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-+
-+ case $depmode in
-+ nosideeffect)
-+ # after this tag, mechanisms are not by side-effect, so they'll
-+ # only be used when explicitly requested
-+ if test "x$enable_dependency_tracking" = xyes; then
-+ continue
-+ else
-+ break
-+ fi
-+ ;;
-+ none) break ;;
-+ esac
-+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+ # mode. It turns out that the SunPro C++ compiler does not properly
-+ # handle `-M -o', and we need to detect this.
-+ if depmode=$depmode \
-+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-+ >/dev/null 2>conftest.err &&
-+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+ # icc doesn't choke on unknown options, it will just issue warnings
-+ # or remarks (even with -Werror). So we grep stderr for any message
-+ # that says an option was ignored or not supported.
-+ # When given -MP, icc 7.0 and 7.1 complain thusly:
-+ # icc: Command line warning: ignoring option '-M'; no argument required
-+ # The diagnosis changed in icc 8.0:
-+ # icc: Command line remark: option '-MP' not supported
-+ if (grep 'ignoring option' conftest.err ||
-+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-+ am_cv_CXX_dependencies_compiler_type=$depmode
-+ break
-+ fi
-+ fi
-+ done
-+
-+ cd ..
-+ rm -rf conftest.dir
-+else
-+ am_cv_CXX_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
-+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-+
-+ if
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
-+ am__fastdepCXX_TRUE=
-+ am__fastdepCXX_FALSE='#'
-+else
-+ am__fastdepCXX_TRUE='#'
-+ am__fastdepCXX_FALSE=
-+fi
-+
-+
-+
-+# By default we simply use the C compiler to build assembly code.
-+
-+test "${CCAS+set}" = set || CCAS=$CC
-+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-+
-+
-+
-+depcc="$CCAS" am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+ # We make a subdir and do the tests there. Otherwise we can end up
-+ # making bogus files that we don't know about and never remove. For
-+ # instance it was reported that on HP-UX the gcc test will end up
-+ # making a dummy file named `D' -- because `-MD' means `put the output
-+ # in D'.
-+ mkdir conftest.dir
-+ # Copy depcomp to subdir because otherwise we won't find it if we're
-+ # using a relative directory.
-+ cp "$am_depcomp" conftest.dir
-+ cd conftest.dir
-+ # We will build objects and dependencies in a subdirectory because
-+ # it helps to detect inapplicable dependency modes. For instance
-+ # both Tru64's cc and ICC support -MD to output dependencies as a
-+ # side effect of compilation, but ICC will put the dependencies in
-+ # the current directory while Tru64 will put them in the object
-+ # directory.
-+ mkdir sub
-+
-+ am_cv_CCAS_dependencies_compiler_type=none
-+ if test "$am_compiler_list" = ""; then
-+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+ fi
-+ for depmode in $am_compiler_list; do
-+ # Setup a source with many dependencies, because some compilers
-+ # like to wrap large dependency lists on column 80 (with \), and
-+ # we should not choose a depcomp mode which is confused by this.
-+ #
-+ # We need to recreate these files for each test, as the compiler may
-+ # overwrite some of them when testing with obscure command lines.
-+ # This happens at least with the AIX C compiler.
-+ : > sub/conftest.c
-+ for i in 1 2 3 4 5 6; do
-+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
-+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-+ # Solaris 8's {/usr,}/bin/sh.
-+ touch sub/conftst$i.h
-+ done
-+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-+
-+ case $depmode in
-+ nosideeffect)
-+ # after this tag, mechanisms are not by side-effect, so they'll
-+ # only be used when explicitly requested
-+ if test "x$enable_dependency_tracking" = xyes; then
-+ continue
-+ else
-+ break
-+ fi
-+ ;;
-+ none) break ;;
-+ esac
-+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+ # mode. It turns out that the SunPro C++ compiler does not properly
-+ # handle `-M -o', and we need to detect this.
-+ if depmode=$depmode \
-+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-+ >/dev/null 2>conftest.err &&
-+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+ # icc doesn't choke on unknown options, it will just issue warnings
-+ # or remarks (even with -Werror). So we grep stderr for any message
-+ # that says an option was ignored or not supported.
-+ # When given -MP, icc 7.0 and 7.1 complain thusly:
-+ # icc: Command line warning: ignoring option '-M'; no argument required
-+ # The diagnosis changed in icc 8.0:
-+ # icc: Command line remark: option '-MP' not supported
-+ if (grep 'ignoring option' conftest.err ||
-+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-+ am_cv_CCAS_dependencies_compiler_type=$depmode
-+ break
-+ fi
-+ fi
-+ done
-+
-+ cd ..
-+ rm -rf conftest.dir
-+else
-+ am_cv_CCAS_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CCAS_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CCAS_dependencies_compiler_type" >&6; }
-+CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type
-+
-+ if
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then
-+ am__fastdepCCAS_TRUE=
-+ am__fastdepCCAS_FALSE='#'
-+else
-+ am__fastdepCCAS_TRUE='#'
-+ am__fastdepCCAS_FALSE=
-+fi
-+
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$AR"; then
-+ ac_cv_prog_AR="$AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AR=$ac_cv_prog_AR
-+if test -n "$AR"; then
-+ { echo "$as_me:$LINENO: result: $AR" >&5
-+echo "${ECHO_T}$AR" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_AR"; then
-+ ac_ct_AR=$AR
-+ # Extract the first word of "ar", so it can be a program name with args.
-+set dummy ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_AR"; then
-+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_AR="ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_AR=$ac_cv_prog_ac_ct_AR
-+if test -n "$ac_ct_AR"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-+echo "${ECHO_T}$ac_ct_AR" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_AR" = x; then
-+ AR=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ AR=$ac_ct_AR
-+ fi
-+else
-+ AR="$ac_cv_prog_AR"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$RANLIB"; then
-+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+RANLIB=$ac_cv_prog_RANLIB
-+if test -n "$RANLIB"; then
-+ { echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_RANLIB"; then
-+ ac_ct_RANLIB=$RANLIB
-+ # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_RANLIB"; then
-+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_RANLIB="ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_RANLIB" = x; then
-+ RANLIB=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ RANLIB=$ac_ct_RANLIB
-+ fi
-+else
-+ RANLIB="$ac_cv_prog_RANLIB"
-+fi
-+ # :)
-+
-+# Find a good install program. We prefer a C program (faster),
-+# so one script is as good as another. But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
-+# ./install, which can be erroneously created by make from ./install.sh.
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+if test -z "$INSTALL"; then
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-+ if test $ac_prog = install &&
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # AIX install. It has an incompatible calling convention.
-+ :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
-+ else
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
-+ fi
-+ done
-+ done
-+ ;;
-+esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+ if test "${ac_cv_path_install+set}" = set; then
-+ INSTALL=$ac_cv_path_install
-+ else
-+ # As a last resort, use the slow shell script. Don't cache a
-+ # value for INSTALL within a source directory, because that will
-+ # break other packages using the cache if that directory is
-+ # removed, or if the value is a relative name.
-+ INSTALL=$ac_install_sh
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+
-+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
-+ # Check whether --enable-maintainer-mode was given.
-+if test "${enable_maintainer_mode+set}" = set; then
-+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-+else
-+ USE_MAINTAINER_MODE=no
-+fi
-+
-+ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
-+ if test $USE_MAINTAINER_MODE = yes; then
-+ MAINTAINER_MODE_TRUE=
-+ MAINTAINER_MODE_FALSE='#'
-+else
-+ MAINTAINER_MODE_TRUE='#'
-+ MAINTAINER_MODE_FALSE=
-+fi
-+
-+ MAINT=$MAINTAINER_MODE_TRUE
-+
-+
-+
-+. ${srcdir}/configure.host
-+
-+# We use a separate variable to pass down CPPFLAGS and CFLAGS from the main mono
-+# configure, because of autoconf brokeness
-+if test "x$CPPFLAGS_FOR_LIBGC" != "x"; then
-+ CPPFLAGS=$CPPFLAGS_FOR_LIBGC
-+fi
-+if test "x$CFLAGS_FOR_LIBGC" != "x"; then
-+ CFLAGS=$CFLAGS_FOR_LIBGC
-+fi
-+
-+GC_CFLAGS=${gc_cflags}
-+
-+
-+case $enable_embed_check in
-+no) ;;
-+*) { { echo "$as_me:$LINENO: error: This module is now part of 'mono' and cannot be built as a stand-alone module any longer." >&5
-+echo "$as_me: error: This module is now part of 'mono' and cannot be built as a stand-alone module any longer." >&2;}
-+ { (exit 1); exit 1; }; } ;;
-+esac
-+
-+THREADS=$with_libgc_threads
-+
-+# Check whether --enable-win32-dllmain was given.
-+if test "${enable_win32_dllmain+set}" = set; then
-+ enableval=$enable_win32_dllmain;
-+fi
-+
-+
-+# Check whether --enable-parallel-mark was given.
-+if test "${enable_parallel_mark+set}" = set; then
-+ enableval=$enable_parallel_mark; case "$THREADS" in
-+ no | none | single)
-+ { { echo "$as_me:$LINENO: error: Parallel mark requires --enable-threads=x spec" >&5
-+echo "$as_me: error: Parallel mark requires --enable-threads=x spec" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+
-+fi
-+
-+
-+# Check whether --enable-cplusplus was given.
-+if test "${enable_cplusplus+set}" = set; then
-+ enableval=$enable_cplusplus;
-+fi
-+
-+
-+INCLUDES=-I${srcdir}/include
-+THREADDLLIBS=
-+## Libraries needed to support dynamic loading and/or threads.
-+case "$THREADS" in
-+ no | none | single)
-+ THREADS=none
-+ ;;
-+ posix | pthreads)
-+ THREADS=posix
-+ THREADDLLIBS=-lpthread
-+ case "$host" in
-+ x86-*-linux* | ia64-*-linux* | i386-*-linux* | i486-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* | alpha*-*-linux* | s390*-*-linux* | sparc*-*-linux* | powerpc-*-linux*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_LINUX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ ;;
-+ *-*-linux*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_LINUX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ ;;
-+ *-*-aix*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_AIX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ ;;
-+ *-*-hpux*)
-+ { echo "$as_me:$LINENO: WARNING: \"Only HP/UX 11 threads are supported.\"" >&5
-+echo "$as_me: WARNING: \"Only HP/UX 11 threads are supported.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_HPUX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _POSIX_C_SOURCE 199506L
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ THREADDLLIBS="-lpthread -lrt"
-+ ;;
-+ *-*-kfreebsd*-gnu)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_FREEBSD_THREADS 1
-+_ACEOF
-+
-+ INCLUDES="$INCLUDES -pthread"
-+ THREADDLLIBS=-pthread
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define USE_COMPILER_TLS 1
-+_ACEOF
-+
-+ ;;
-+ *-*-freebsd4*)
-+ { echo "$as_me:$LINENO: WARNING: \"FreeBSD does not yet fully support threads with Boehm GC.\"" >&5
-+echo "$as_me: WARNING: \"FreeBSD does not yet fully support threads with Boehm GC.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_FREEBSD_THREADS 1
-+_ACEOF
-+
-+ if test "x$PTHREAD_CFLAGS" = "x"; then
-+ INCLUDES="$INCLUDES -pthread"
-+ else
-+ INCLUDES="$INCLUDES $PTHREAD_CFLAGS"
-+ fi
-+ if test "x$PTHREAD_LIBS" = "x"; then
-+ THREADDLLIBS=-pthread
-+ else
-+ THREADDLLIBS=$PTHREAD_LIBS
-+ fi
-+ ;;
-+ *-*-freebsd5*)
-+ { echo "$as_me:$LINENO: WARNING: \"FreeBSD does not yet fully support threads with Boehm GC.\"" >&5
-+echo "$as_me: WARNING: \"FreeBSD does not yet fully support threads with Boehm GC.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_FREEBSD_THREADS 1
-+_ACEOF
-+
-+ INCLUDES="$INCLUDES -pthread"
-+ THREADDLLIBS=-pthread
-+ ;;
-+ *-*-freebsd6*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_FREEBSD_THREADS 1
-+_ACEOF
-+
-+ if test "x$PTHREAD_CFLAGS" != "x"; then
-+ INCLUDES="$INCLUDES $PTHREAD_CFLAGS"
-+ fi
-+ if test "x$PTHREAD_LIBS" = "x"; then
-+ THREADDLLIBS=-pthread
-+ else
-+ THREADDLLIBS="$PTHREAD_LIBS"
-+ fi
-+ ;;
-+ *-*-solaris*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_SOLARIS_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_SOLARIS_PTHREADS 1
-+_ACEOF
-+
-+ ;;
-+ *-*-irix*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_IRIX_THREADS 1
-+_ACEOF
-+
-+ ;;
-+ *-*-cygwin*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_WIN32_THREADS 1
-+_ACEOF
-+
-+ ;;
-+ *-*-darwin*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_DARWIN_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ ;;
-+ *-*-netbsd*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_NETBSD_THREADS 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ ;;
-+ *-*-osf*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_OSF1_THREADS 1
-+_ACEOF
-+
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ # May want to enable it in other cases, too.
-+ # Measurements havent yet been done.
-+ fi
-+ INCLUDES="$INCLUDES -pthread"
-+ THREADDLLIBS="-lpthread -lrt"
-+ ;;
-+ *)
-+ { { echo "$as_me:$LINENO: error: \"Pthreads not supported by the GC on this platform.\"" >&5
-+echo "$as_me: error: \"Pthreads not supported by the GC on this platform.\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+ ;;
-+ win32)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_WIN32_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_GETENV 1
-+_ACEOF
-+
-+ if test "${enable_win32_dllmain}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_INSIDE_DLL 1
-+_ACEOF
-+
-+ fi
-+ ;;
-+ dgux386)
-+ THREADS=dgux386
-+ { echo "$as_me:$LINENO: result: $THREADDLLIBS" >&5
-+echo "${ECHO_T}$THREADDLLIBS" >&6; }
-+ # Use pthread GCC switch
-+ THREADDLLIBS=-pthread
-+ if test "${enable_parallel_mark}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define PARALLEL_MARK 1
-+_ACEOF
-+
-+ fi
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define THREAD_LOCAL_ALLOC 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_DGUX386_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define DGUX_THREADS 1
-+_ACEOF
-+
-+ # Enable _POSIX4A_DRAFT10_SOURCE with flag -pthread
-+ INCLUDES="-pthread $INCLUDES"
-+ ;;
-+ aix)
-+ THREADS=posix
-+ THREADDLLIBS=-lpthread
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_AIX_THREADS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define _REENTRANT 1
-+_ACEOF
-+
-+ ;;
-+ decosf1 | irix | mach | os2 | solaris | dce | vxworks)
-+ { { echo "$as_me:$LINENO: error: thread package $THREADS not yet supported" >&5
-+echo "$as_me: error: thread package $THREADS not yet supported" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ *)
-+ { { echo "$as_me:$LINENO: error: $THREADS is an unknown thread package" >&5
-+echo "$as_me: error: $THREADS is an unknown thread package" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+esac
-+
-+
-+case "$host" in
-+ powerpc-*-darwin*)
-+ powerpc_darwin=true
-+ ;;
-+esac
-+ if test x$powerpc_darwin = xtrue; then
-+ POWERPC_DARWIN_TRUE=
-+ POWERPC_DARWIN_FALSE='#'
-+else
-+ POWERPC_DARWIN_TRUE='#'
-+ POWERPC_DARWIN_FALSE=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking for xlc" >&5
-+echo $ECHO_N "checking for xlc... $ECHO_C" >&6; }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ #ifndef __xlC__
-+ # error
-+ #endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ compiler_xlc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ compiler_xlc=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $compiler_xlc" >&5
-+echo "${ECHO_T}$compiler_xlc" >&6; }
-+ if test $compiler_xlc = yes; then
-+ COMPILER_XLC_TRUE=
-+ COMPILER_XLC_FALSE='#'
-+else
-+ COMPILER_XLC_TRUE='#'
-+ COMPILER_XLC_FALSE=
-+fi
-+
-+if test $compiler_xlc = yes -a "$powerpc_darwin" = true; then
-+ # the darwin stack-frame-walking code is completely broken on xlc
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define DARWIN_DONT_PARSE_STACK 1
-+_ACEOF
-+
-+fi
-+
-+# We never want libdl on darwin. It is a fake libdl that just ends up making
-+# dyld calls anyway
-+case "$host" in
-+ *-*-darwin*) ;;
-+ *)
-+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ THREADDLLIBS="$THREADDLLIBS -ldl"
-+fi
-+
-+ ;;
-+esac
-+
-+
-+
-+target_all=libgc.la
-+
-+
-+TARGET_ECOS="no"
-+
-+# Check whether --with-ecos was given.
-+if test "${with_ecos+set}" = set; then
-+ withval=$with_ecos; TARGET_ECOS="$with_ecos"
-+
-+fi
-+
-+
-+addobjs=
-+addlibs=
-+addincludes=
-+addtests=
-+CXXINCLUDES=
-+case "$TARGET_ECOS" in
-+ no)
-+ ;;
-+ *)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define ECOS 1
-+_ACEOF
-+
-+ CXXINCLUDES="-I${TARGET_ECOS}/include"
-+ addobjs="$addobjs ecos.lo"
-+ ;;
-+esac
-+
-+if test "${enable_cplusplus}" = yes; then
-+ addincludes="$addincludes include/gc_cpp.h include/gc_allocator.h"
-+ addtests="$addtests test_cpp"
-+fi
-+
-+ if test "${enable_cplusplus}" = yes; then
-+ CPLUSPLUS_TRUE=
-+ CPLUSPLUS_FALSE='#'
-+else
-+ CPLUSPLUS_TRUE='#'
-+ CPLUSPLUS_FALSE=
-+fi
-+
-+
-+
-+
-+
-+
-+
-+# Configuration of shared libraries
-+#
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+# Check whether --enable-shared was given.
-+if test "${enable_shared+set}" = set; then
-+ enableval=$enable_shared; p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_shared=yes ;;
-+ no) enable_shared=no ;;
-+ *)
-+ enable_shared=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_shared=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
-+else
-+ enable_shared=yes
-+fi
-+
-+
-+
-+case "$host" in
-+ alpha-*-openbsd*)
-+ enable_shared=no
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+ ;;
-+ *)
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+ ;;
-+esac
-+
-+# Configuration of machine-dependent code
-+#
-+{ echo "$as_me:$LINENO: checking which machine-dependent code should be used" >&5
-+echo $ECHO_N "checking which machine-dependent code should be used... $ECHO_C" >&6; }
-+machdep=
-+case "$host" in
-+ alpha-*-openbsd*)
-+ machdep="alpha_mach_dep.lo"
-+ if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then
-+ { echo "$as_me:$LINENO: WARNING: OpenBSD/Alpha without dlopen(). Shared library support is disabled" >&5
-+echo "$as_me: WARNING: OpenBSD/Alpha without dlopen(). Shared library support is disabled" >&2;}
-+ fi
-+ ;;
-+ alpha*-*-linux*)
-+ machdep="alpha_mach_dep.lo"
-+ ;;
-+ i?86-*-solaris2.[89] | i?86-*-solaris2.1?)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SOLARIS25_PROC_VDB_BUG_FIXED 1
-+_ACEOF
-+
-+ ;;
-+ mipstx39-*-elf*)
-+ machdep="mips_ultrix_mach_dep.lo"
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define STACKBASE __stackbase
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define DATASTART_IS_ETEXT 1
-+_ACEOF
-+
-+ ;;
-+ mips-dec-ultrix*)
-+ machdep="mips_ultrix_mach-dep.lo"
-+ ;;
-+ mips-nec-sysv*|mips-unknown-sysv*)
-+ ;;
-+ mips*-*-linux*)
-+ ;;
-+ mips-*-*)
-+ machdep="mips_sgi_mach_dep.lo"
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_EXECUTE_PERMISSION 1
-+_ACEOF
-+
-+ ;;
-+ sparc-*-netbsd*)
-+ machdep="sparc_netbsd_mach_dep.lo"
-+ ;;
-+ sparc-sun-solaris2.3)
-+ machdep="sparc_mach_dep.lo"
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SUNOS53_SHARED_LIB 1
-+_ACEOF
-+
-+ ;;
-+ sparc*-sun-solaris2.*)
-+ machdep="sparc_mach_dep.lo"
-+ ;;
-+ ia64-*-*)
-+ machdep="mach_dep.lo ia64_save_regs_in_stack.lo"
-+ ;;
-+esac
-+if test x"$machdep" = x; then
-+{ echo "$as_me:$LINENO: result: $machdep" >&5
-+echo "${ECHO_T}$machdep" >&6; }
-+ machdep="mach_dep.lo"
-+fi
-+addobjs="$addobjs $machdep"
-+
-+
-+
-+
-+
-+# Check whether --enable-static was given.
-+if test "${enable_static+set}" = set; then
-+ enableval=$enable_static; p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_static=yes ;;
-+ no) enable_static=no ;;
-+ *)
-+ enable_static=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_static=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
-+else
-+ enable_static=yes
-+fi
-+
-+
-+# Check whether --enable-fast-install was given.
-+if test "${enable_fast_install+set}" = set; then
-+ enableval=$enable_fast_install; p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_fast_install=yes ;;
-+ no) enable_fast_install=no ;;
-+ *)
-+ enable_fast_install=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_fast_install=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
-+else
-+ enable_fast_install=yes
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-+if test "${lt_cv_path_SED+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for lt_ac_prog in sed gsed; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
-+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-+ fi
-+ done
-+ done
-+done
-+IFS=$as_save_IFS
-+lt_ac_max=0
-+lt_ac_count=0
-+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+# along with /bin/sed that truncates output.
-+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-+ test ! -f $lt_ac_sed && continue
-+ cat /dev/null > conftest.in
-+ lt_ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-+ # Check for GNU sed and select it if it is found.
-+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-+ lt_cv_path_SED=$lt_ac_sed
-+ break
-+ fi
-+ while true; do
-+ cat conftest.in conftest.in >conftest.tmp
-+ mv conftest.tmp conftest.in
-+ cp conftest.in conftest.nl
-+ echo >>conftest.nl
-+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-+ cmp -s conftest.out conftest.nl || break
-+ # 10000 chars as input seems more than enough
-+ test $lt_ac_count -gt 10 && break
-+ lt_ac_count=`expr $lt_ac_count + 1`
-+ if test $lt_ac_count -gt $lt_ac_max; then
-+ lt_ac_max=$lt_ac_count
-+ lt_cv_path_SED=$lt_ac_sed
-+ fi
-+ done
-+done
-+
-+fi
-+
-+SED=$lt_cv_path_SED
-+
-+{ echo "$as_me:$LINENO: result: $SED" >&5
-+echo "${ECHO_T}$SED" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-+if test "${ac_cv_path_GREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Extract the first word of "grep ggrep" to use in msg output
-+if test -z "$GREP"; then
-+set dummy grep ggrep; ac_prog_name=$2
-+if test "${ac_cv_path_GREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_path_GREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in grep ggrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-+ # Check for GNU ac_path_GREP and select it if it is found.
-+ # Check for GNU $ac_path_GREP
-+case `"$ac_path_GREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-+*)
-+ ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ echo 'GREP' >> "conftest.nl"
-+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ ac_count=`expr $ac_count + 1`
-+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_GREP="$ac_path_GREP"
-+ ac_path_GREP_max=$ac_count
-+ fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+ $ac_path_GREP_found && break 3
-+ done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+GREP="$ac_cv_path_GREP"
-+if test -z "$GREP"; then
-+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+ ac_cv_path_GREP=$GREP
-+fi
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
-+ GREP="$ac_cv_path_GREP"
-+
-+
-+{ echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-+ then ac_cv_path_EGREP="$GREP -E"
-+ else
-+ # Extract the first word of "egrep" to use in msg output
-+if test -z "$EGREP"; then
-+set dummy egrep; ac_prog_name=$2
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_path_EGREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in egrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-+ # Check for GNU ac_path_EGREP and select it if it is found.
-+ # Check for GNU $ac_path_EGREP
-+case `"$ac_path_EGREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-+*)
-+ ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ echo 'EGREP' >> "conftest.nl"
-+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ ac_count=`expr $ac_count + 1`
-+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_EGREP="$ac_path_EGREP"
-+ ac_path_EGREP_max=$ac_count
-+ fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+ $ac_path_EGREP_found && break 3
-+ done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+EGREP="$ac_cv_path_EGREP"
-+if test -z "$EGREP"; then
-+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+ ac_cv_path_EGREP=$EGREP
-+fi
-+
-+
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
-+ EGREP="$ac_cv_path_EGREP"
-+
-+
-+
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-+else
-+ with_gnu_ld=no
-+fi
-+
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [\\/]* | ?:[\\/]*)
-+ re_direlt='/[^/][^/]*/\.\./'
-+ # Canonicalize the pathname of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ { echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-+else
-+ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$LD"; then
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some variants of GNU ld only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break
-+ ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+else
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+ { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+ { (exit 1); exit 1; }; }
-+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-+if test "${lt_cv_ld_reload_flag+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_ld_reload_flag='-r'
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-+reload_flag=$lt_cv_ld_reload_flag
-+case $reload_flag in
-+"" | " "*) ;;
-+*) reload_flag=" $reload_flag" ;;
-+esac
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+case $host_os in
-+ darwin*)
-+ if test "$GCC" = yes; then
-+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-+ else
-+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
-+if test "${lt_cv_path_NM+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$NM"; then
-+ # Let the user override the test.
-+ lt_cv_path_NM="$NM"
-+else
-+ lt_nm_to_check="${ac_tool_prefix}nm"
-+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-+ lt_nm_to_check="$lt_nm_to_check nm"
-+ fi
-+ for lt_tmp_nm in $lt_nm_to_check; do
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ tmp_nm="$ac_dir/$lt_tmp_nm"
-+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-+ # Check to see if the nm accepts a BSD-compat flag.
-+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+ # nm: unknown option "B" ignored
-+ # Tru64's nm complains that /dev/null is an invalid object file
-+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-+ */dev/null* | *'Invalid file or object type'*)
-+ lt_cv_path_NM="$tmp_nm -B"
-+ break
-+ ;;
-+ *)
-+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-+ */dev/null*)
-+ lt_cv_path_NM="$tmp_nm -p"
-+ break
-+ ;;
-+ *)
-+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-+ continue # so that we can try to find one that supports BSD flags
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ done
-+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-+fi
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-+echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-+NM="$lt_cv_path_NM"
-+
-+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-+LN_S=$as_ln_s
-+if test "$LN_S" = "ln -s"; then
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-+echo "${ECHO_T}no, using $LN_S" >&6; }
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
-+if test "${lt_cv_deplibs_check_method+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_file_magic_cmd='$MAGIC_CMD'
-+lt_cv_file_magic_test_file=
-+lt_cv_deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [[regex]]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given extended regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+
-+case $host_os in
-+aix[4-9]*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+beos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+bsdi[45]*)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-+ lt_cv_file_magic_cmd='/usr/bin/file -L'
-+ lt_cv_file_magic_test_file=/shlib/libc.so
-+ ;;
-+
-+cygwin*)
-+ # func_win32_libid is a shell function defined in ltmain.sh
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='func_win32_libid'
-+ ;;
-+
-+mingw* | pw32*)
-+ # Base MSYS/MinGW do not provide the 'file' command needed by
-+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
-+ # unless we find 'file', for example because we are cross-compiling.
-+ if ( file / ) >/dev/null 2>&1; then
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='func_win32_libid'
-+ else
-+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ lt_cv_file_magic_cmd='$OBJDUMP -f'
-+ fi
-+ ;;
-+
-+darwin* | rhapsody*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ case $host_cpu in
-+ i*86 )
-+ # Not sure whether the presence of OpenBSD here was a mistake.
-+ # Let's accept both of them until this is cleared up.
-+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ ;;
-+ esac
-+ else
-+ lt_cv_deplibs_check_method=pass_all
-+ fi
-+ ;;
-+
-+gnu*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+hpux10.20* | hpux11*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ case $host_cpu in
-+ ia64*)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-+ ;;
-+ hppa*64*)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-+ ;;
-+ *)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
-+ ;;
-+ esac
-+ ;;
-+
-+interix[3-9]*)
-+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $LD in
-+ *-32|*"-32 ") libmagic=32-bit;;
-+ *-n32|*"-n32 ") libmagic=N32;;
-+ *-64|*"-64 ") libmagic=64-bit;;
-+ *) libmagic=never-match;;
-+ esac
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-+ fi
-+ ;;
-+
-+newos6*)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
-+ ;;
-+
-+nto-qnx*)
-+ lt_cv_deplibs_check_method=unknown
-+ ;;
-+
-+openbsd*)
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+ fi
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+rdos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+solaris*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ case $host_vendor in
-+ motorola)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-+ ;;
-+ ncr)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ sequent)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-+ ;;
-+ sni)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-+ lt_cv_file_magic_test_file=/lib/libc.so
-+ ;;
-+ siemens)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ pc)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ esac
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+esac
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
-+file_magic_cmd=$lt_cv_file_magic_cmd
-+deplibs_check_method=$lt_cv_deplibs_check_method
-+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-+
-+
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+# Check whether --enable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+ enableval=$enable_libtool_lock;
-+fi
-+
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+# Some flags need to be propagated to the compiler or linker for good
-+# libtool support.
-+case $host in
-+ia64-*-hpux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *ELF-32*)
-+ HPUX_IA64_MODE="32"
-+ ;;
-+ *ELF-64*)
-+ HPUX_IA64_MODE="64"
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+*-*-irix6*)
-+ # Find out which ABI we are using.
-+ echo '#line __oline__ "configure"' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -melf32bsmip"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -melf32bmipn32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -melf64bmip"
-+ ;;
-+ esac
-+ else
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -32"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -n32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -64"
-+ ;;
-+ esac
-+ fi
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-+s390*-*linux*|sparc*-*linux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.o` in
-+ *32-bit*)
-+ case $host in
-+ x86_64-*kfreebsd*-gnu)
-+ LD="${LD-ld} -m elf_i386_fbsd"
-+ ;;
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_i386"
-+ ;;
-+ ppc64-*linux*|powerpc64-*linux*)
-+ LD="${LD-ld} -m elf32ppclinux"
-+ ;;
-+ s390x-*linux*)
-+ LD="${LD-ld} -m elf_s390"
-+ ;;
-+ sparc64-*linux*)
-+ LD="${LD-ld} -m elf32_sparc"
-+ ;;
-+ esac
-+ ;;
-+ *64-bit*)
-+ case $host in
-+ x86_64-*kfreebsd*-gnu)
-+ LD="${LD-ld} -m elf_x86_64_fbsd"
-+ ;;
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_x86_64"
-+ ;;
-+ ppc*-*linux*|powerpc*-*linux*)
-+ LD="${LD-ld} -m elf64ppc"
-+ ;;
-+ s390*-*linux*)
-+ LD="${LD-ld} -m elf64_s390"
-+ ;;
-+ sparc*-*linux*)
-+ LD="${LD-ld} -m elf64_sparc"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+*-*-sco3.2v5*)
-+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-+ SAVE_CFLAGS="$CFLAGS"
-+ CFLAGS="$CFLAGS -belf"
-+ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
-+if test "${lt_cv_cc_needs_belf+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ lt_cv_cc_needs_belf=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ lt_cv_cc_needs_belf=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
-+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-+ CFLAGS="$SAVE_CFLAGS"
-+ fi
-+ ;;
-+sparc*-*solaris*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.o` in
-+ *64-bit*)
-+ case $lt_cv_prog_gnu_ld in
-+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
-+ *)
-+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-+ LD="${LD-ld} -64"
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+
-+esac
-+
-+need_locks="$enable_libtool_lock"
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-+# On Suns, sometimes $CPP names a directory.
-+if test -n "$CPP" && test -d "$CPP"; then
-+ CPP=
-+fi
-+if test -z "$CPP"; then
-+ if test "${ac_cv_prog_CPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Double quotes because CPP needs to be expanded
-+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@ifdef __STDC__
-+@%:@ include <limits.h>
-+@%:@else
-+@%:@ include <assert.h>
-+@%:@endif
-+ Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether nonexistent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
-+fi
-+
-+ done
-+ ac_cv_prog_CPP=$CPP
-+
-+fi
-+ CPP=$ac_cv_prog_CPP
-+else
-+ ac_cv_prog_CPP=$CPP
-+fi
-+{ echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6; }
-+ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@ifdef __STDC__
-+@%:@ include <limits.h>
-+@%:@else
-+@%:@ include <assert.h>
-+@%:@endif
-+ Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether nonexistent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-+if test "${ac_cv_header_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+#include <stdarg.h>
-+#include <string.h>
-+#include <float.h>
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_header_stdc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_header_stdc=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <string.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "memchr" >/dev/null 2>&1; then
-+ :
-+else
-+ ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "free" >/dev/null 2>&1; then
-+ :
-+else
-+ ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-+ if test "$cross_compiling" = yes; then
-+ :
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ctype.h>
-+#include <stdlib.h>
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+ (('a' <= (c) && (c) <= 'i') \
-+ || ('j' <= (c) && (c) <= 'r') \
-+ || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-+
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+ int i;
-+ for (i = 0; i < 256; i++)
-+ if (XOR (islower (i), ISLOWER (i))
-+ || toupper (i) != TOUPPER (i))
-+ return 2;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-+if test $ac_cv_header_stdc = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define STDC_HEADERS 1
-+_ACEOF
-+
-+fi
-+
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+ inttypes.h stdint.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+
-+@%:@include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ eval "$as_ac_Header=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ eval "$as_ac_Header=no"
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+ { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+for ac_header in dlfcn.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+ { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+else
-+ # Is the header compilable?
-+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+@%:@include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_compiler=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6; }
-+
-+# Is the header present?
-+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <$ac_header>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6; }
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+ ( cat <<\_ASBOX
-+@%:@@%:@ -------------------------------- @%:@@%:@
-+@%:@@%:@ Report this to Hans_Boehm at hp.com @%:@@%:@
-+@%:@@%:@ -------------------------------- @%:@@%:@
-+_ASBOX
-+ ) | sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=\$ac_header_preproc"
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+ { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-+if test -z "$CXXCPP"; then
-+ if test "${ac_cv_prog_CXXCPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Double quotes because CXXCPP needs to be expanded
-+ for CXXCPP in "$CXX -E" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@ifdef __STDC__
-+@%:@ include <limits.h>
-+@%:@else
-+@%:@ include <assert.h>
-+@%:@endif
-+ Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether nonexistent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
-+fi
-+
-+ done
-+ ac_cv_prog_CXXCPP=$CXXCPP
-+
-+fi
-+ CXXCPP=$ac_cv_prog_CXXCPP
-+else
-+ ac_cv_prog_CXXCPP=$CXXCPP
-+fi
-+{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-+echo "${ECHO_T}$CXXCPP" >&6; }
-+ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@ifdef __STDC__
-+@%:@ include <limits.h>
-+@%:@else
-+@%:@ include <assert.h>
-+@%:@endif
-+ Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether nonexistent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+fi
-+
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$F77"; then
-+ ac_cv_prog_F77="$F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+F77=$ac_cv_prog_F77
-+if test -n "$F77"; then
-+ { echo "$as_me:$LINENO: result: $F77" >&5
-+echo "${ECHO_T}$F77" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$F77" && break
-+ done
-+fi
-+if test -z "$F77"; then
-+ ac_ct_F77=$F77
-+ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_F77"; then
-+ ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_F77="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_F77=$ac_cv_prog_ac_ct_F77
-+if test -n "$ac_ct_F77"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-+echo "${ECHO_T}$ac_ct_F77" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+ test -n "$ac_ct_F77" && break
-+done
-+
-+ if test "x$ac_ct_F77" = x; then
-+ F77=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ F77=$ac_ct_F77
-+ fi
-+fi
-+
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+rm -f a.out
-+
-+# If we don't use `.F' as extension, the preprocessor is not run on the
-+# input file. (Note that this only needs to work for GNU compilers.)
-+ac_save_ext=$ac_ext
-+ac_ext=F
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_f77_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
-+ac_ext=$ac_save_ext
-+ac_test_FFLAGS=${FFLAGS+set}
-+ac_save_FFLAGS=$FFLAGS
-+FFLAGS=
-+{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_f77_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ FFLAGS=-g
-+cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_f77_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_f77_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_prog_f77_g=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
-+if test "$ac_test_FFLAGS" = set; then
-+ FFLAGS=$ac_save_FFLAGS
-+elif test $ac_cv_prog_f77_g = yes; then
-+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+ FFLAGS="-g -O2"
-+ else
-+ FFLAGS="-g"
-+ fi
-+else
-+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+ FFLAGS="-O2"
-+ else
-+ FFLAGS=
-+ fi
-+fi
-+
-+G77=`test $ac_compiler_gnu = yes && echo yes`
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-+# find the maximum length of command line arguments
-+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ i=0
-+ teststring="ABCD"
-+
-+ case $build_os in
-+ msdosdjgpp*)
-+ # On DJGPP, this test can blow up pretty badly due to problems in libc
-+ # (any single argument exceeding 2000 bytes causes a buffer overrun
-+ # during glob expansion). Even if it were fixed, the result of this
-+ # check would be larger than it should be.
-+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
-+ ;;
-+
-+ gnu*)
-+ # Under GNU Hurd, this test is not required because there is
-+ # no limit to the length of command line arguments.
-+ # Libtool will interpret -1 as no limit whatsoever
-+ lt_cv_sys_max_cmd_len=-1;
-+ ;;
-+
-+ cygwin* | mingw*)
-+ # On Win9x/ME, this test blows up -- it succeeds, but takes
-+ # about 5 minutes as the teststring grows exponentially.
-+ # Worse, since 9x/ME are not pre-emptively multitasking,
-+ # you end up with a "frozen" computer, even though with patience
-+ # the test eventually succeeds (with a max line length of 256k).
-+ # Instead, let's just punt: use the minimum linelength reported by
-+ # all of the supported platforms: 8192 (on NT/2K/XP).
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ amigaos*)
-+ # On AmigaOS with pdksh, this test takes hours, literally.
-+ # So we just punt and use a minimum line length of 8192.
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-+ # This has been around since 386BSD, at least. Likely further.
-+ if test -x /sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-+ elif test -x /usr/sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-+ else
-+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
-+ fi
-+ # And add a safety zone
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+ ;;
-+
-+ interix*)
-+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
-+ lt_cv_sys_max_cmd_len=196608
-+ ;;
-+
-+ osf*)
-+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-+ # nice to cause kernel panics so lets avoid the loop below.
-+ # First set a reasonable default.
-+ lt_cv_sys_max_cmd_len=16384
-+ #
-+ if test -x /sbin/sysconfig; then
-+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
-+ esac
-+ fi
-+ ;;
-+ sco3.2v5*)
-+ lt_cv_sys_max_cmd_len=102400
-+ ;;
-+ sysv5* | sco5v6* | sysv4.2uw2*)
-+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-+ if test -n "$kargmax"; then
-+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
-+ else
-+ lt_cv_sys_max_cmd_len=32768
-+ fi
-+ ;;
-+ *)
-+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-+ if test -n "$lt_cv_sys_max_cmd_len"; then
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+ else
-+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-+ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-+ = "XX$teststring") >/dev/null 2>&1 &&
-+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
-+ lt_cv_sys_max_cmd_len=$new_result &&
-+ test $i != 17 # 1/2 MB should be enough
-+ do
-+ i=`expr $i + 1`
-+ teststring=$teststring$teststring
-+ done
-+ teststring=
-+ # Add a significant safety factor because C++ compilers can tack on massive
-+ # amounts of additional arguments before passing them to the linker.
-+ # It appears as though 1/2 is a usable value.
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+ fi
-+ ;;
-+ esac
-+
-+fi
-+
-+if test -n $lt_cv_sys_max_cmd_len ; then
-+ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: none" >&5
-+echo "${ECHO_T}none" >&6; }
-+fi
-+
-+
-+
-+
-+
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[BCDEGRST]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-+
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+
-+# Define system-specific variables.
-+case $host_os in
-+aix*)
-+ symcode='[BCDT]'
-+ ;;
-+cygwin* | mingw* | pw32*)
-+ symcode='[ABCDGISTW]'
-+ ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+ if test "$host_cpu" = ia64; then
-+ symcode='[ABCDEGRST]'
-+ fi
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ ;;
-+linux* | k*bsd*-gnu)
-+ if test "$host_cpu" = ia64; then
-+ symcode='[ABCDGIRSTW]'
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ fi
-+ ;;
-+irix* | nonstopux*)
-+ symcode='[BCDEGRST]'
-+ ;;
-+osf*)
-+ symcode='[BCDEGQRST]'
-+ ;;
-+solaris*)
-+ symcode='[BDRT]'
-+ ;;
-+sco3.2v5*)
-+ symcode='[DT]'
-+ ;;
-+sysv4.2uw2*)
-+ symcode='[DT]'
-+ ;;
-+sysv5* | sco5v6* | unixware* | OpenUNIX*)
-+ symcode='[ABDT]'
-+ ;;
-+sysv4)
-+ symcode='[DFNSTU]'
-+ ;;
-+esac
-+
-+# Handle CRLF in mingw tool chain
-+opt_cr=
-+case $build_os in
-+mingw*)
-+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-+ ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+case `$NM -V 2>&1` in
-+*GNU* | *'with BFD'*)
-+ symcode='[ABCDGIRSTW]' ;;
-+esac
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-+ symxfrm="\\1 $ac_symprfx\\2 \\2"
-+
-+ # Write the raw and C identifiers.
-+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-+
-+ # Check to see that the pipe works correctly.
-+ pipe_works=no
-+
-+ rm -f conftest*
-+ cat > conftest.$ac_ext <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+int main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Now try to grab the symbols.
-+ nlist=conftest.nm
-+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s "$nlist"; then
-+ # Try sorting and uniquifying the output.
-+ if sort "$nlist" | uniq > "$nlist"T; then
-+ mv -f "$nlist"T "$nlist"
-+ else
-+ rm -f "$nlist"T
-+ fi
-+
-+ # Make sure that we snagged all the symbols we need.
-+ if grep ' nm_test_var$' "$nlist" >/dev/null; then
-+ if grep ' nm_test_func$' "$nlist" >/dev/null; then
-+ cat <<EOF > conftest.$ac_ext
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+ # Now generate the symbol file.
-+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-+
-+ cat <<EOF >> conftest.$ac_ext
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+ const char *name;
-+ lt_ptr_t address;
-+}
-+lt_preloaded_symbols[] =
-+{
-+EOF
-+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-+ cat <<\EOF >> conftest.$ac_ext
-+ {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+ # Now try linking the two files.
-+ mv conftest.$ac_objext conftstm.$ac_objext
-+ lt_save_LIBS="$LIBS"
-+ lt_save_CFLAGS="$CFLAGS"
-+ LIBS="conftstm.$ac_objext"
-+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext}; then
-+ pipe_works=yes
-+ fi
-+ LIBS="$lt_save_LIBS"
-+ CFLAGS="$lt_save_CFLAGS"
-+ else
-+ echo "cannot find nm_test_func in $nlist" >&5
-+ fi
-+ else
-+ echo "cannot find nm_test_var in $nlist" >&5
-+ fi
-+ else
-+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-+ fi
-+ else
-+ echo "$progname: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ fi
-+ rm -rf conftest* conftst*
-+
-+ # Do not use the global_symbol_pipe unless it works.
-+ if test "$pipe_works" = yes; then
-+ break
-+ else
-+ lt_cv_sys_global_symbol_pipe=
-+ fi
-+done
-+
-+fi
-+
-+if test -z "$lt_cv_sys_global_symbol_pipe"; then
-+ lt_cv_sys_global_symbol_to_cdecl=
-+fi
-+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-+ { echo "$as_me:$LINENO: result: failed" >&5
-+echo "${ECHO_T}failed" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: ok" >&5
-+echo "${ECHO_T}ok" >&6; }
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for objdir" >&5
-+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-+if test "${lt_cv_objdir+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+ lt_cv_objdir=.libs
-+else
-+ # MS-DOS does not allow filenames that begin with a dot.
-+ lt_cv_objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-+echo "${ECHO_T}$lt_cv_objdir" >&6; }
-+objdir=$lt_cv_objdir
-+
-+
-+
-+
-+
-+case $host_os in
-+aix3*)
-+ # AIX sometimes has problems with the GCC collect2 program. For some
-+ # reason, if we set the COLLECT_NAMES environment variable, the problems
-+ # vanish in a puff of smoke.
-+ if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+ fi
-+ ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting. It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-+
-+# Same as above, but do not quote variable references.
-+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# Sed substitution to avoid accidental globbing in evaled expressions
-+no_glob_subst='s/\*/\\\*/g'
-+
-+# Constants:
-+rm="rm -f"
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+
-+# All known linkers require a `.a' archive for static linking (except MSVC,
-+# which needs '.lib').
-+libext=a
-+ltmain="$ac_aux_dir/ltmain.sh"
-+ofile="$default_ofile"
-+with_gnu_ld="$lt_cv_prog_gnu_ld"
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$AR"; then
-+ ac_cv_prog_AR="$AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AR=$ac_cv_prog_AR
-+if test -n "$AR"; then
-+ { echo "$as_me:$LINENO: result: $AR" >&5
-+echo "${ECHO_T}$AR" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_AR"; then
-+ ac_ct_AR=$AR
-+ # Extract the first word of "ar", so it can be a program name with args.
-+set dummy ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_AR"; then
-+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_AR="ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_AR=$ac_cv_prog_ac_ct_AR
-+if test -n "$ac_ct_AR"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-+echo "${ECHO_T}$ac_ct_AR" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_AR" = x; then
-+ AR="false"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ AR=$ac_ct_AR
-+ fi
-+else
-+ AR="$ac_cv_prog_AR"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$RANLIB"; then
-+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+RANLIB=$ac_cv_prog_RANLIB
-+if test -n "$RANLIB"; then
-+ { echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_RANLIB"; then
-+ ac_ct_RANLIB=$RANLIB
-+ # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_RANLIB"; then
-+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_RANLIB="ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_RANLIB" = x; then
-+ RANLIB=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ RANLIB=$ac_ct_RANLIB
-+ fi
-+else
-+ RANLIB="$ac_cv_prog_RANLIB"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$STRIP"; then
-+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+ { echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+ ac_ct_STRIP=$STRIP
-+ # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_STRIP"; then
-+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_STRIP="strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_STRIP" = x; then
-+ STRIP=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ STRIP=$ac_ct_STRIP
-+ fi
-+else
-+ STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+
-+# Set sane defaults for various variables
-+test -z "$AR" && AR=ar
-+test -z "$AR_FLAGS" && AR_FLAGS=cru
-+test -z "$AS" && AS=as
-+test -z "$CC" && CC=cc
-+test -z "$LTCC" && LTCC=$CC
-+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$LD" && LD=ld
-+test -z "$LN_S" && LN_S="ln -s"
-+test -z "$MAGIC_CMD" && MAGIC_CMD=file
-+test -z "$NM" && NM=nm
-+test -z "$SED" && SED=sed
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$RANLIB" && RANLIB=:
-+test -z "$STRIP" && STRIP=:
-+test -z "$ac_objext" && ac_objext=o
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+if test -n "$RANLIB"; then
-+ case $host_os in
-+ openbsd*)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-+ ;;
-+ *)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-+ ;;
-+ esac
-+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+fi
-+
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $MAGIC_CMD in
-+[\\/*] | ?:[\\/]*)
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/${ac_tool_prefix}file; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool at gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+if test -z "$lt_cv_path_MAGIC_CMD"; then
-+ if test -n "$ac_tool_prefix"; then
-+ { echo "$as_me:$LINENO: checking for file" >&5
-+echo $ECHO_N "checking for file... $ECHO_C" >&6; }
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $MAGIC_CMD in
-+[\\/*] | ?:[\\/]*)
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/file; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool at gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ else
-+ MAGIC_CMD=:
-+ fi
-+fi
-+
-+ fi
-+ ;;
-+esac
-+
-+
-+ case $host_os in
-+ rhapsody* | darwin*)
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$DSYMUTIL"; then
-+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+DSYMUTIL=$ac_cv_prog_DSYMUTIL
-+if test -n "$DSYMUTIL"; then
-+ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-+echo "${ECHO_T}$DSYMUTIL" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_DSYMUTIL"; then
-+ ac_ct_DSYMUTIL=$DSYMUTIL
-+ # Extract the first word of "dsymutil", so it can be a program name with args.
-+set dummy dsymutil; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_DSYMUTIL"; then
-+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-+if test -n "$ac_ct_DSYMUTIL"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-+echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_DSYMUTIL" = x; then
-+ DSYMUTIL=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ DSYMUTIL=$ac_ct_DSYMUTIL
-+ fi
-+else
-+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-+fi
-+
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_NMEDIT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$NMEDIT"; then
-+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+NMEDIT=$ac_cv_prog_NMEDIT
-+if test -n "$NMEDIT"; then
-+ { echo "$as_me:$LINENO: result: $NMEDIT" >&5
-+echo "${ECHO_T}$NMEDIT" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_NMEDIT"; then
-+ ac_ct_NMEDIT=$NMEDIT
-+ # Extract the first word of "nmedit", so it can be a program name with args.
-+set dummy nmedit; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_NMEDIT"; then
-+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-+if test -n "$ac_ct_NMEDIT"; then
-+ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-+echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_NMEDIT" = x; then
-+ NMEDIT=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ NMEDIT=$ac_ct_NMEDIT
-+ fi
-+else
-+ NMEDIT="$ac_cv_prog_NMEDIT"
-+fi
-+
-+
-+ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-+echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
-+if test "${lt_cv_apple_cc_single_mod+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_apple_cc_single_mod=no
-+ if test -z "${LT_MULTI_MODULE}"; then
-+ # By default we will add the -single_module flag. You can override
-+ # by either setting the environment variable LT_MULTI_MODULE
-+ # non-empty at configure time, or by adding -multi_module to the
-+ # link flags.
-+ echo "int foo(void){return 1;}" > conftest.c
-+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-+ -dynamiclib ${wl}-single_module conftest.c
-+ if test -f libconftest.dylib; then
-+ lt_cv_apple_cc_single_mod=yes
-+ rm -rf libconftest.dylib*
-+ fi
-+ rm conftest.c
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-+echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
-+ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-+echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
-+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_ld_exported_symbols_list=no
-+ save_LDFLAGS=$LDFLAGS
-+ echo "_main" > conftest.sym
-+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ lt_cv_ld_exported_symbols_list=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ lt_cv_ld_exported_symbols_list=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-+echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
-+ case $host_os in
-+ rhapsody* | darwin1.[0123])
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-+ darwin1.*)
-+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-+ darwin*)
-+ # if running on 10.5 or later, the deployment target defaults
-+ # to the OS version, if on x86, and 10.4, the deployment
-+ # target defaults to 10.4. Don't you love it?
-+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-+ 10.[012]*)
-+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-+ 10.*)
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-+ esac
-+ ;;
-+ esac
-+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-+ _lt_dar_single_mod='$single_module'
-+ fi
-+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-+ else
-+ _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
-+ fi
-+ if test "$DSYMUTIL" != ":"; then
-+ _lt_dsymutil="~$DSYMUTIL \$lib || :"
-+ else
-+ _lt_dsymutil=
-+ fi
-+ ;;
-+ esac
-+
-+
-+enable_dlopen=no
-+enable_win32_dll=no
-+
-+# Check whether --enable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+ enableval=$enable_libtool_lock;
-+fi
-+
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+
-+# Check whether --with-pic was given.
-+if test "${with_pic+set}" = set; then
-+ withval=$with_pic; pic_mode="$withval"
-+else
-+ pic_mode=default
-+fi
-+
-+test -z "$pic_mode" && pic_mode=default
-+
-+# Use C for the default configuration in the libtool script
-+tagname=
-+lt_save_CC="$CC"
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+# Source file extension for C test sources.
-+ac_ext=c
-+
-+# Object file extension for compiled C test sources.
-+objext=o
-+objext=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(){return(0);}'
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+
-+lt_prog_compiler_no_builtin_flag=
-+
-+if test "$GCC" = yes; then
-+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_rtti_exceptions=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="-fno-rtti -fno-exceptions"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_rtti_exceptions=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-+else
-+ :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl=
-+lt_prog_compiler_pic=
-+lt_prog_compiler_static=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_static='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+ lt_prog_compiler_pic='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic='-fno-common'
-+ ;;
-+
-+ interix[3-9]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static='-Bstatic'
-+ else
-+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic='-qnocommon'
-+ lt_prog_compiler_wl='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-fpic'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C 5.9
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ lt_prog_compiler_wl='-Wl,'
-+ ;;
-+ *Sun\ F*)
-+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ lt_prog_compiler_wl=''
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+
-+ rdos*)
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl='-Qoption ld '
-+ lt_prog_compiler_pic='-PIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic='-Kconform_pic'
-+ lt_prog_compiler_static='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_can_build_shared=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic='-pic'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_pic_works=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_pic_works=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
-+ case $lt_prog_compiler_pic in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic=
-+ lt_prog_compiler_can_build_shared=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_static_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_static_works=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_static_works=yes
-+ fi
-+ else
-+ lt_cv_prog_compiler_static_works=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+ runpath_var=
-+ allow_undefined_flag=
-+ enable_shared_with_static_runtimes=no
-+ archive_cmds=
-+ archive_expsym_cmds=
-+ old_archive_From_new_cmds=
-+ old_archive_from_expsyms_cmds=
-+ export_dynamic_flag_spec=
-+ whole_archive_flag_spec=
-+ thread_safe_flag_spec=
-+ hardcode_libdir_flag_spec=
-+ hardcode_libdir_flag_spec_ld=
-+ hardcode_libdir_separator=
-+ hardcode_direct=no
-+ hardcode_minus_L=no
-+ hardcode_shlibpath_var=unsupported
-+ link_all_deplibs=unknown
-+ hardcode_automatic=no
-+ module_cmds=
-+ module_expsym_cmds=
-+ always_export_symbols=no
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ # Exclude shared library initialization/finalization symbols.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix[3-9]*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+
-+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=no
-+ enable_shared_with_static_runtimes=yes
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ interix[3-9]*)
-+ hardcode_direct=no
-+ hardcode_shlibpath_var=no
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ gnu* | linux* | k*bsd*-gnu)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*) # Sun C 5.9
-+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_sharedflag='-G' ;;
-+ *Sun\ F*) # Sun Fortran 8.3
-+ tmp_sharedflag='-G' ;;
-+ *)
-+ tmp_sharedflag='-shared' ;;
-+ esac
-+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs=no
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec=
-+ export_dynamic_flag_spec=
-+ whole_archive_flag_spec=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=yes
-+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct=unsupported
-+ fi
-+ ;;
-+
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds=''
-+ hardcode_direct=yes
-+ hardcode_libdir_separator=':'
-+ link_all_deplibs=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L=yes
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_libdir_separator=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag="-z nodefs"
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag=' ${wl}-bernotok'
-+ allow_undefined_flag=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec='$convenience'
-+ archive_cmds_need_lc=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc=no
-+ hardcode_direct=no
-+ hardcode_automatic=yes
-+ hardcode_shlibpath_var=unsupported
-+ whole_archive_flag_spec=''
-+ link_all_deplibs=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_direct=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+
-+ hardcode_direct=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld='+b $libdir'
-+ hardcode_direct=no
-+ hardcode_shlibpath_var=no
-+ ;;
-+ *)
-+ hardcode_direct=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ link_all_deplibs=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ allow_undefined_flag=unsupported
-+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag=' -expect_unresolved \*'
-+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag=' -expect_unresolved \*'
-+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_shlibpath_var=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'. GCC discards it without `$wl',
-+ # but is careful enough not to reorder.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ if test "$GCC" = yes; then
-+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ else
-+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-+ fi
-+ ;;
-+ esac
-+ link_all_deplibs=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds='$CC -r -o $output$reload_objs'
-+ hardcode_direct=no
-+ ;;
-+ motorola)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var=no
-+ export_dynamic_flag_spec='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag='${wl}-z,text'
-+ archive_cmds_need_lc=no
-+ hardcode_shlibpath_var=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag='${wl}-z,text'
-+ allow_undefined_flag='${wl}-z,nodefs'
-+ archive_cmds_need_lc=no
-+ hardcode_shlibpath_var=no
-+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator=':'
-+ link_all_deplibs=yes
-+ export_dynamic_flag_spec='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-+echo "${ECHO_T}$ld_shlibs" >&6; }
-+test "$ld_shlibs" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl
-+ pic_flag=$lt_prog_compiler_pic
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag
-+ allow_undefined_flag=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc=no
-+ else
-+ archive_cmds_need_lc=yes
-+ fi
-+ allow_undefined_flag=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+if test "$GCC" = yes; then
-+ case $host_os in
-+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-+ *) lt_awk_arg="/^libraries:/" ;;
-+ esac
-+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # Ok, now we have the path, separated by spaces, we can step through it
-+ # and add multilib dir if necessary.
-+ lt_tmp_lt_search_path_spec=
-+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-+ for lt_sys_path in $lt_search_path_spec; do
-+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-+ else
-+ test -d "$lt_sys_path" && \
-+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-+ fi
-+ done
-+ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-+BEGIN {RS=" "; FS="/|\n";} {
-+ lt_foo="";
-+ lt_count=0;
-+ for (lt_i = NF; lt_i > 0; lt_i--) {
-+ if ($lt_i != "" && $lt_i != ".") {
-+ if ($lt_i == "..") {
-+ lt_count++;
-+ } else {
-+ if (lt_count == 0) {
-+ lt_foo="/" $lt_i lt_foo;
-+ } else {
-+ lt_count--;
-+ }
-+ }
-+ }
-+ }
-+ if (lt_foo != "") { lt_freq[lt_foo]++; }
-+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
-+}'`
-+ sys_lib_search_path_spec=`echo $lt_search_path_spec`
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[4-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[3-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-+fi
-+
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-+fi
-+
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action=
-+if test -n "$hardcode_libdir_flag_spec" || \
-+ test -n "$runpath_var" || \
-+ test "X$hardcode_automatic" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-+ test "$hardcode_minus_L" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-+echo "${ECHO_T}$hardcode_action" >&6; }
-+
-+if test "$hardcode_action" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+striplib=
-+old_striplib=
-+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+else
-+# FIXME - insert some real tests, host_os isn't really good enough
-+ case $host_os in
-+ darwin*)
-+ if test -n "$STRIP" ; then
-+ striplib="$STRIP -x"
-+ old_striplib="$STRIP -S"
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+ else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+ ;;
-+ *)
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+ ;;
-+ esac
-+fi
-+
-+if test "x$enable_dlopen" != xyes; then
-+ enable_dlopen=unknown
-+ enable_dlopen_self=unknown
-+ enable_dlopen_self_static=unknown
-+else
-+ lt_cv_dlopen=no
-+ lt_cv_dlopen_libs=
-+
-+ case $host_os in
-+ beos*)
-+ lt_cv_dlopen="load_add_on"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ;;
-+
-+ mingw* | pw32*)
-+ lt_cv_dlopen="LoadLibrary"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ cygwin*)
-+ lt_cv_dlopen="dlopen"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ darwin*)
-+ # if libdl is installed we need to link against it
-+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+
-+ lt_cv_dlopen="dyld"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+
-+fi
-+
-+ ;;
-+
-+ *)
-+ { echo "$as_me:$LINENO: checking for shl_load" >&5
-+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
-+if test "${ac_cv_func_shl_load+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define shl_load innocuous_shl_load
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char shl_load (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef shl_load
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char shl_load ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined __stub_shl_load || defined __stub___shl_load
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return shl_load ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_func_shl_load=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_func_shl_load=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-+if test $ac_cv_func_shl_load = yes; then
-+ lt_cv_dlopen="shl_load"
-+else
-+ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char shl_load ();
-+int
-+main ()
-+{
-+return shl_load ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dld_shl_load=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dld_shl_load=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-+if test $ac_cv_lib_dld_shl_load = yes; then
-+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-+else
-+ { echo "$as_me:$LINENO: checking for dlopen" >&5
-+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
-+if test "${ac_cv_func_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define dlopen innocuous_dlopen
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char dlopen (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef dlopen
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined __stub_dlopen || defined __stub___dlopen
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_func_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_func_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-+if test $ac_cv_func_dlopen = yes; then
-+ lt_cv_dlopen="dlopen"
-+else
-+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lsvld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_svld_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_svld_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-+if test $ac_cv_lib_svld_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-+else
-+ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dld_link ();
-+int
-+main ()
-+{
-+return dld_link ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_dld_dld_link=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_dld_dld_link=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-+if test $ac_cv_lib_dld_dld_link = yes; then
-+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+ ;;
-+ esac
-+
-+ if test "x$lt_cv_dlopen" != xno; then
-+ enable_dlopen=yes
-+ else
-+ enable_dlopen=no
-+ fi
-+
-+ case $lt_cv_dlopen in
-+ dlopen)
-+ save_CPPFLAGS="$CPPFLAGS"
-+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+
-+ save_LDFLAGS="$LDFLAGS"
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+
-+ save_LIBS="$LIBS"
-+ LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
-+if test "${lt_cv_dlopen_self+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$cross_compiling" = yes; then :
-+ lt_cv_dlopen_self=cross
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+#line __oline__ "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+ else
-+ puts (dlerror ());
-+
-+ exit (status);
-+}
-+EOF
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) >&5 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-+ esac
-+ else :
-+ # compilation failed
-+ lt_cv_dlopen_self=no
-+ fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
-+
-+ if test "x$lt_cv_dlopen_self" = xyes; then
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-+ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
-+if test "${lt_cv_dlopen_self_static+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$cross_compiling" = yes; then :
-+ lt_cv_dlopen_self_static=cross
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+#line __oline__ "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+ else
-+ puts (dlerror ());
-+
-+ exit (status);
-+}
-+EOF
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) >&5 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-+ esac
-+ else :
-+ # compilation failed
-+ lt_cv_dlopen_self_static=no
-+ fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
-+ fi
-+
-+ CPPFLAGS="$save_CPPFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+ LIBS="$save_LIBS"
-+ ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self in
-+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+ *) enable_dlopen_self=unknown ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self_static in
-+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+ *) enable_dlopen_self_static=unknown ;;
-+ esac
-+fi
-+
-+
-+# Report which library types will actually be built
-+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+
-+aix[4-9]*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+{ echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6; }
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler \
-+ CC \
-+ LD \
-+ lt_prog_compiler_wl \
-+ lt_prog_compiler_pic \
-+ lt_prog_compiler_static \
-+ lt_prog_compiler_no_builtin_flag \
-+ export_dynamic_flag_spec \
-+ thread_safe_flag_spec \
-+ whole_archive_flag_spec \
-+ enable_shared_with_static_runtimes \
-+ old_archive_cmds \
-+ old_archive_from_new_cmds \
-+ predep_objects \
-+ postdep_objects \
-+ predeps \
-+ postdeps \
-+ compiler_lib_search_path \
-+ compiler_lib_search_dirs \
-+ archive_cmds \
-+ archive_expsym_cmds \
-+ postinstall_cmds \
-+ postuninstall_cmds \
-+ old_archive_from_expsyms_cmds \
-+ allow_undefined_flag \
-+ no_undefined_flag \
-+ export_symbols_cmds \
-+ hardcode_libdir_flag_spec \
-+ hardcode_libdir_flag_spec_ld \
-+ hardcode_libdir_separator \
-+ hardcode_automatic \
-+ module_cmds \
-+ module_expsym_cmds \
-+ lt_cv_prog_compiler_c_o \
-+ fix_srcfile_path \
-+ exclude_expsyms \
-+ include_expsyms; do
-+
-+ case $var in
-+ old_archive_cmds | \
-+ old_archive_from_new_cmds | \
-+ archive_cmds | \
-+ archive_expsym_cmds | \
-+ module_cmds | \
-+ module_expsym_cmds | \
-+ old_archive_from_expsyms_cmds | \
-+ export_symbols_cmds | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="${ofile}T"
-+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+ $rm -f "$cfgfile"
-+ { echo "$as_me:$LINENO: creating $ofile" >&5
-+echo "$as_me: creating $ofile" >&6;}
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+#! $SHELL
-+
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-+# Free Software Foundation, Inc.
-+#
-+# This file is part of GNU Libtool:
-+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A sed program that does not truncate output.
-+SED=$lt_SED
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="$SED -e 1s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+# The names of the tagged configurations supported by this script.
-+available_tags=
-+
-+# ### BEGIN LIBTOOL CONFIG
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds
-+archive_expsym_cmds=$lt_archive_expsym_cmds
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds
-+module_expsym_cmds=$lt_module_expsym_cmds
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms
-+
-+# ### END LIBTOOL CONFIG
-+
-+__EOF__
-+
-+
-+ case $host_os in
-+ aix3*)
-+ cat <<\EOF >> "$cfgfile"
-+
-+# AIX sometimes has problems with the GCC collect2 program. For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+fi
-+EOF
-+ ;;
-+ esac
-+
-+ # We use sed instead of cat because bash on DJGPP gets confused if
-+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
-+ # text mode, it properly converts lines to CR/LF. This bash problem
-+ # is reportedly fixed, but why not run on old versions too?
-+ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-+
-+ mv -f "$cfgfile" "$ofile" || \
-+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+ chmod +x "$ofile"
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+
-+# Check whether --with-tags was given.
-+if test "${with_tags+set}" = set; then
-+ withval=$with_tags; tagnames="$withval"
-+fi
-+
-+
-+if test -f "$ltmain" && test -n "$tagnames"; then
-+ if test ! -f "${ofile}"; then
-+ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-+ fi
-+
-+ if test -z "$LTCC"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-+ if test -z "$LTCC"; then
-+ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-+ else
-+ { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-+echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-+ fi
-+ fi
-+ if test -z "$LTCFLAGS"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-+ fi
-+
-+ # Extract list of available tagged configurations in $ofile.
-+ # Note that this assumes the entire list is on one line.
-+ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-+
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for tagname in $tagnames; do
-+ IFS="$lt_save_ifs"
-+ # Check whether tagname contains only valid characters
-+ case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-+ "") ;;
-+ *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-+echo "$as_me: error: invalid tag name: $tagname" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+
-+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-+ then
-+ { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-+echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+
-+ # Update the list of available tags.
-+ if test -n "$tagname"; then
-+ echo appending configuration tag \"$tagname\" to $ofile
-+
-+ case $tagname in
-+ CXX)
-+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+
-+
-+
-+archive_cmds_need_lc_CXX=no
-+allow_undefined_flag_CXX=
-+always_export_symbols_CXX=no
-+archive_expsym_cmds_CXX=
-+export_dynamic_flag_spec_CXX=
-+hardcode_direct_CXX=no
-+hardcode_libdir_flag_spec_CXX=
-+hardcode_libdir_flag_spec_ld_CXX=
-+hardcode_libdir_separator_CXX=
-+hardcode_minus_L_CXX=no
-+hardcode_shlibpath_var_CXX=unsupported
-+hardcode_automatic_CXX=no
-+module_cmds_CXX=
-+module_expsym_cmds_CXX=
-+link_all_deplibs_CXX=unknown
-+old_archive_cmds_CXX=$old_archive_cmds
-+no_undefined_flag_CXX=
-+whole_archive_flag_spec_CXX=
-+enable_shared_with_static_runtimes_CXX=no
-+
-+# Dependencies to place before and after the object being linked:
-+predep_objects_CXX=
-+postdep_objects_CXX=
-+predeps_CXX=
-+postdeps_CXX=
-+compiler_lib_search_path_CXX=
-+compiler_lib_search_dirs_CXX=
-+
-+# Source file extension for C++ test sources.
-+ac_ext=cpp
-+
-+# Object file extension for compiled C++ test sources.
-+objext=o
-+objext_CXX=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC=$CC
-+lt_save_LD=$LD
-+lt_save_GCC=$GCC
-+GCC=$GXX
-+lt_save_with_gnu_ld=$with_gnu_ld
-+lt_save_path_LD=$lt_cv_path_LD
-+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-+else
-+ $as_unset lt_cv_prog_gnu_ld
-+fi
-+if test -n "${lt_cv_path_LDCXX+set}"; then
-+ lt_cv_path_LD=$lt_cv_path_LDCXX
-+else
-+ $as_unset lt_cv_path_LD
-+fi
-+test -z "${LDCXX+set}" || LD=$LDCXX
-+CC=${CXX-"c++"}
-+compiler=$CC
-+compiler_CXX=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# We don't want -fno-exception wen compiling C++ code, so set the
-+# no_builtin_flag separately
-+if test "$GXX" = yes; then
-+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-+else
-+ lt_prog_compiler_no_builtin_flag_CXX=
-+fi
-+
-+if test "$GXX" = yes; then
-+ # Set up default GNU C++ configuration
-+
-+
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-+else
-+ with_gnu_ld=no
-+fi
-+
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [\\/]* | ?:[\\/]*)
-+ re_direlt='/[^/][^/]*/\.\./'
-+ # Canonicalize the pathname of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ { echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-+else
-+ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$LD"; then
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some variants of GNU ld only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break
-+ ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+else
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+ { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+ { (exit 1); exit 1; }; }
-+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+
-+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
-+ # archiving commands below assume that GNU ld is being used.
-+ if test "$with_gnu_ld" = yes; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-+ # investigate it a little bit more. (MM)
-+ wlarc='${wl}'
-+
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-+ grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_CXX=
-+ fi
-+ else
-+ with_gnu_ld=no
-+ wlarc=
-+
-+ # A generic and very simple default shared library creation
-+ # command for GNU C++ for the case where it uses the native
-+ # linker, instead of GNU ld. If possible, this setting should
-+ # overridden to take advantage of the native linker features on
-+ # the platform it is being used on.
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ fi
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+else
-+ GXX=no
-+ with_gnu_ld=no
-+ wlarc=
-+fi
-+
-+# PORTME: fill in a description of your system's C++ link characteristics
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+ld_shlibs_CXX=yes
-+case $host_os in
-+ aix3*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ case $ld_flag in
-+ *-brtl*)
-+ aix_use_runtimelinking=yes
-+ break
-+ ;;
-+ esac
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_CXX=''
-+ hardcode_direct_CXX=yes
-+ hardcode_libdir_separator_CXX=':'
-+ link_all_deplibs_CXX=yes
-+
-+ if test "$GXX" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct_CXX=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_CXX=yes
-+ hardcode_libdir_flag_spec_CXX='-L$libdir'
-+ hardcode_libdir_separator_CXX=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_CXX=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_CXX='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+
-+ archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_CXX="-z nodefs"
-+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_cxx_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_CXX=' ${wl}-bernotok'
-+ allow_undefined_flag_CXX=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_CXX='$convenience'
-+ archive_cmds_need_lc_CXX=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_CXX=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+
-+ chorus*)
-+ case $cc_basename in
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_CXX='-L$libdir'
-+ allow_undefined_flag_CXX=unsupported
-+ always_export_symbols_CXX=no
-+ enable_shared_with_static_runtimes_CXX=yes
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ darwin* | rhapsody*)
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_direct_CXX=no
-+ hardcode_automatic_CXX=yes
-+ hardcode_shlibpath_var_CXX=unsupported
-+ whole_archive_flag_spec_CXX=''
-+ link_all_deplibs_CXX=yes
-+ allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
-+ if test "$GXX" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-+ fi
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ freebsd[12]*)
-+ # C++ shared libraries reported to be fairly broken before switch to ELF
-+ ld_shlibs_CXX=no
-+ ;;
-+ freebsd-elf*)
-+ archive_cmds_need_lc_CXX=no
-+ ;;
-+ freebsd* | dragonfly*)
-+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-+ # conventions
-+ ld_shlibs_CXX=yes
-+ ;;
-+ gnu*)
-+ ;;
-+ hpux9*)
-+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ hardcode_direct_CXX=yes
-+ hardcode_minus_L_CXX=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aCC*)
-+ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ hpux10*|hpux11*)
-+ if test $with_gnu_ld = no; then
-+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*) ;;
-+ *)
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ ;;
-+ esac
-+ fi
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_direct_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ ;;
-+ *)
-+ hardcode_direct_CXX=yes
-+ hardcode_minus_L_CXX=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+ ;;
-+ esac
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aCC*)
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test $with_gnu_ld = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ interix[3-9]*)
-+ hardcode_direct_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+ irix5* | irix6*)
-+ case $cc_basename in
-+ CC*)
-+ # SGI C++
-+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test "$with_gnu_ld" = no; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-+ fi
-+ fi
-+ link_all_deplibs_CXX=yes
-+ ;;
-+ esac
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+ ;;
-+ icpc*)
-+ # Intel C++
-+ with_gnu_ld=yes
-+ # version 8.0 and above of icpc choke on multiply defined symbols
-+ # if we add $predep_objects and $postdep_objects, however 7.1 and
-+ # earlier do not add the objects themselves.
-+ case `$CC -V 2>&1` in
-+ *"Version 7."*)
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ *) # Version 8.0 or newer
-+ tmp_idyn=
-+ case $host_cpu in
-+ ia64*) tmp_idyn=' -i_dynamic';;
-+ esac
-+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ esac
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-+ ;;
-+ pgCC* | pgcpp*)
-+ # Portland Group C++ compiler
-+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-+
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ no_undefined_flag_CXX=' -zdefs'
-+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-+ hardcode_libdir_flag_spec_CXX='-R$libdir'
-+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+
-+ # Not sure whether something based on
-+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-+ # would be better.
-+ output_verbose_link_cmd='echo'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ m88k*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-+ wlarc=
-+ hardcode_libdir_flag_spec_CXX='-R$libdir'
-+ hardcode_direct_CXX=yes
-+ hardcode_shlibpath_var_CXX=no
-+ fi
-+ # Workaround some broken pre-1.5 toolchains
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-+ ;;
-+ openbsd2*)
-+ # C++ shared libraries are fairly broken
-+ ld_shlibs_CXX=no
-+ ;;
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct_CXX=yes
-+ hardcode_shlibpath_var_CXX=no
-+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ fi
-+ output_verbose_link_cmd='echo'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ osf3*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ cxx*)
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Archives containing C++ object files must be created using
-+ # the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ cxx*)
-+ allow_undefined_flag_CXX=' -expect_unresolved \*'
-+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-+ echo "-hidden">> $lib.exp~
-+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-+ $rm $lib.exp'
-+
-+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ lcc*)
-+ # Lucid
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ archive_cmds_need_lc_CXX=yes
-+ no_undefined_flag_CXX=' -zdefs'
-+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ hardcode_libdir_flag_spec_CXX='-R$libdir'
-+ hardcode_shlibpath_var_CXX=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
-+ ;;
-+ esac
-+ link_all_deplibs_CXX=yes
-+
-+ output_verbose_link_cmd='echo'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+
-+ # The C++ compiler must be used to create the archive.
-+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ # GNU C++ compiler with Solaris linker
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-+ if $CC --version | grep -v '^2\.7' > /dev/null; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ else
-+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
-+ # platform.
-+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag_CXX='${wl}-z,text'
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ # For security reasons, it is highly recommended that you always
-+ # use absolute paths for naming shared libraries, and exclude the
-+ # DT_RUNPATH tag from executables and libraries. But doing so
-+ # requires that you compile everything twice, which is a pain.
-+ # So that behaviour is only enabled if SCOABSPATH is set to a
-+ # non-empty value in the environment. Most likely only useful for
-+ # creating official distributions of packages.
-+ # This is a hack until libtool officially supports absolute path
-+ # names for shared libraries.
-+ no_undefined_flag_CXX='${wl}-z,text'
-+ allow_undefined_flag_CXX='${wl}-z,nodefs'
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_CXX=':'
-+ link_all_deplibs_CXX=yes
-+ export_dynamic_flag_spec_CXX='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+GCC_CXX="$GXX"
-+LD_CXX="$LD"
-+
-+cat > conftest.$ac_ext <<EOF
-+class Foo
-+{
-+public:
-+ Foo (void) { a = 0; }
-+private:
-+ int a;
-+};
-+EOF
-+
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Parse the compiler output and extract the necessary
-+ # objects, libraries and library flags.
-+
-+ # Sentinel used to keep track of whether or not we are before
-+ # the conftest object file.
-+ pre_test_object_deps_done=no
-+
-+ # The `*' in the case matches for architectures that use `case' in
-+ # $output_verbose_cmd can trigger glob expansion during the loop
-+ # eval without this substitution.
-+ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-+
-+ for p in `eval $output_verbose_link_cmd`; do
-+ case $p in
-+
-+ -L* | -R* | -l*)
-+ # Some compilers place space between "-{L,R}" and the path.
-+ # Remove the space.
-+ if test $p = "-L" \
-+ || test $p = "-R"; then
-+ prev=$p
-+ continue
-+ else
-+ prev=
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ case $p in
-+ -L* | -R*)
-+ # Internal compiler library paths should come after those
-+ # provided the user. The postdeps already come after the
-+ # user supplied libs so there is no need to process them.
-+ if test -z "$compiler_lib_search_path_CXX"; then
-+ compiler_lib_search_path_CXX="${prev}${p}"
-+ else
-+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-+ fi
-+ ;;
-+ # The "-l" case would never come before the object being
-+ # linked, so don't bother handling this case.
-+ esac
-+ else
-+ if test -z "$postdeps_CXX"; then
-+ postdeps_CXX="${prev}${p}"
-+ else
-+ postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-+ fi
-+ fi
-+ ;;
-+
-+ *.$objext)
-+ # This assumes that the test object file only shows up
-+ # once in the compiler output.
-+ if test "$p" = "conftest.$objext"; then
-+ pre_test_object_deps_done=yes
-+ continue
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ if test -z "$predep_objects_CXX"; then
-+ predep_objects_CXX="$p"
-+ else
-+ predep_objects_CXX="$predep_objects_CXX $p"
-+ fi
-+ else
-+ if test -z "$postdep_objects_CXX"; then
-+ postdep_objects_CXX="$p"
-+ else
-+ postdep_objects_CXX="$postdep_objects_CXX $p"
-+ fi
-+ fi
-+ ;;
-+
-+ *) ;; # Ignore the rest.
-+
-+ esac
-+ done
-+
-+ # Clean up.
-+ rm -f a.out a.exe
-+else
-+ echo "libtool.m4: error: problem compiling CXX test program"
-+fi
-+
-+$rm -f confest.$objext
-+
-+compiler_lib_search_dirs_CXX=
-+if test -n "$compiler_lib_search_path_CXX"; then
-+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-+fi
-+
-+# PORTME: override above test on systems where it is broken
-+case $host_os in
-+interix[3-9]*)
-+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
-+ # hack all around it, let's just trust "g++" to DTRT.
-+ predep_objects_CXX=
-+ postdep_objects_CXX=
-+ postdeps_CXX=
-+ ;;
-+
-+linux*)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ #
-+ # The more standards-conforming stlport4 library is
-+ # incompatible with the Cstd library. Avoid specifying
-+ # it if it's in CXXFLAGS. Ignore libCrun as
-+ # -library=stlport4 depends on it.
-+ case " $CXX $CXXFLAGS " in
-+ *" -library=stlport4 "*)
-+ solaris_use_stlport4=yes
-+ ;;
-+ esac
-+ if test "$solaris_use_stlport4" != yes; then
-+ postdeps_CXX='-library=Cstd -library=Crun'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # The more standards-conforming stlport4 library is
-+ # incompatible with the Cstd library. Avoid specifying
-+ # it if it's in CXXFLAGS. Ignore libCrun as
-+ # -library=stlport4 depends on it.
-+ case " $CXX $CXXFLAGS " in
-+ *" -library=stlport4 "*)
-+ solaris_use_stlport4=yes
-+ ;;
-+ esac
-+
-+ # Adding this requires a known-good setup of shared libraries for
-+ # Sun compiler versions before 5.6, else PIC objects from an old
-+ # archive will be linked into the output, leading to subtle bugs.
-+ if test "$solaris_use_stlport4" != yes; then
-+ postdeps_CXX='-library=Cstd -library=Crun'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+esac
-+
-+case " $postdeps_CXX " in
-+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-+esac
-+
-+lt_prog_compiler_wl_CXX=
-+lt_prog_compiler_pic_CXX=
-+lt_prog_compiler_static_CXX=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+ # C++ specific cases for pic, static, wl, etc.
-+ if test "$GXX" = yes; then
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ fi
-+ ;;
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+ mingw* | cygwin* | os2* | pw32*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-+ ;;
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_CXX='-fno-common'
-+ ;;
-+ *djgpp*)
-+ # DJGPP does not support shared libraries at all
-+ lt_prog_compiler_pic_CXX=
-+ ;;
-+ interix[3-9]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_CXX=-Kconform_pic
-+ fi
-+ ;;
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ esac
-+ else
-+ case $host_os in
-+ aix[4-9]*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ else
-+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ chorus*)
-+ case $cc_basename in
-+ cxch68*)
-+ # Green Hills C++ Compiler
-+ # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-+ ;;
-+ esac
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_CXX='-qnocommon'
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ freebsd* | dragonfly*)
-+ # FreeBSD uses GNU C++
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+ if test "$host_cpu" != ia64; then
-+ lt_prog_compiler_pic_CXX='+Z'
-+ fi
-+ ;;
-+ aCC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='+Z'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ interix*)
-+ # This is c89, which is MS Visual C++ (no shared libs)
-+ # Anyone wants to do a port?
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ # CC pic flag -KPIC is the default.
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ KCC*)
-+ # KAI C++ Compiler
-+ lt_prog_compiler_wl_CXX='--backend -Wl,'
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ icpc* | ecpc*)
-+ # Intel C++
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-static'
-+ ;;
-+ pgCC* | pgcpp*)
-+ # Portland Group C++ compiler.
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-fpic'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ lt_prog_compiler_wl_CXX='-Qoption ld '
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ ;;
-+ m88k*)
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ lt_prog_compiler_pic_CXX='-W c,exportall'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu)
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ lt_prog_compiler_wl_CXX='--backend -Wl,'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ cxx*)
-+ # Digital/Compaq C++
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ lt_prog_compiler_wl_CXX='-Qoption ld '
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ lt_prog_compiler_pic_CXX='-PIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ lt_prog_compiler_pic_CXX='-pic'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ lcc*)
-+ # Lucid
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ ;;
-+ *)
-+ lt_prog_compiler_can_build_shared_CXX=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_CXX"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_pic_works_CXX=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_pic_works_CXX=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
-+ case $lt_prog_compiler_pic_CXX in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_can_build_shared_CXX=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_CXX=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_static_works_CXX=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_static_works_CXX=yes
-+ fi
-+ else
-+ lt_cv_prog_compiler_static_works_CXX=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_CXX=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_CXX=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_CXX=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ case $host_os in
-+ aix[4-9]*)
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ ;;
-+ pw32*)
-+ export_symbols_cmds_CXX="$ltdll_cmds"
-+ ;;
-+ cygwin* | mingw*)
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ link_all_deplibs_CXX=no
-+ ;;
-+ *)
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ esac
-+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_CXX" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_CXX=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_CXX in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_CXX
-+ pic_flag=$lt_prog_compiler_pic_CXX
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-+ allow_undefined_flag_CXX=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_CXX=no
-+ else
-+ archive_cmds_need_lc_CXX=yes
-+ fi
-+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[4-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[3-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-+fi
-+
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-+fi
-+
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_CXX=
-+if test -n "$hardcode_libdir_flag_spec_CXX" || \
-+ test -n "$runpath_var_CXX" || \
-+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_CXX" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-+ test "$hardcode_minus_L_CXX" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_CXX=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_CXX=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_CXX=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-+echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-+
-+if test "$hardcode_action_CXX" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_CXX \
-+ CC_CXX \
-+ LD_CXX \
-+ lt_prog_compiler_wl_CXX \
-+ lt_prog_compiler_pic_CXX \
-+ lt_prog_compiler_static_CXX \
-+ lt_prog_compiler_no_builtin_flag_CXX \
-+ export_dynamic_flag_spec_CXX \
-+ thread_safe_flag_spec_CXX \
-+ whole_archive_flag_spec_CXX \
-+ enable_shared_with_static_runtimes_CXX \
-+ old_archive_cmds_CXX \
-+ old_archive_from_new_cmds_CXX \
-+ predep_objects_CXX \
-+ postdep_objects_CXX \
-+ predeps_CXX \
-+ postdeps_CXX \
-+ compiler_lib_search_path_CXX \
-+ compiler_lib_search_dirs_CXX \
-+ archive_cmds_CXX \
-+ archive_expsym_cmds_CXX \
-+ postinstall_cmds_CXX \
-+ postuninstall_cmds_CXX \
-+ old_archive_from_expsyms_cmds_CXX \
-+ allow_undefined_flag_CXX \
-+ no_undefined_flag_CXX \
-+ export_symbols_cmds_CXX \
-+ hardcode_libdir_flag_spec_CXX \
-+ hardcode_libdir_flag_spec_ld_CXX \
-+ hardcode_libdir_separator_CXX \
-+ hardcode_automatic_CXX \
-+ module_cmds_CXX \
-+ module_expsym_cmds_CXX \
-+ lt_cv_prog_compiler_c_o_CXX \
-+ fix_srcfile_path_CXX \
-+ exclude_expsyms_CXX \
-+ include_expsyms_CXX; do
-+
-+ case $var in
-+ old_archive_cmds_CXX | \
-+ old_archive_from_new_cmds_CXX | \
-+ archive_cmds_CXX | \
-+ archive_expsym_cmds_CXX | \
-+ module_cmds_CXX | \
-+ module_expsym_cmds_CXX | \
-+ old_archive_from_expsyms_cmds_CXX | \
-+ export_symbols_cmds_CXX | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_CXX
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_CXX
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_CXX
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_CXX
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_CXX
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_CXX
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_CXX
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_CXX
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_CXX
-+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_CXX
-+module_expsym_cmds=$lt_module_expsym_cmds_CXX
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_CXX
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_CXX
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_CXX
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_CXX
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_CXX
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_CXX
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_CXX
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_CXX
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_CXX
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_CXX
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_CXX
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_CXX
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_CXX
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC=$lt_save_CC
-+LDCXX=$LD
-+LD=$lt_save_LD
-+GCC=$lt_save_GCC
-+with_gnu_ldcxx=$with_gnu_ld
-+with_gnu_ld=$lt_save_with_gnu_ld
-+lt_cv_path_LDCXX=$lt_cv_path_LD
-+lt_cv_path_LD=$lt_save_path_LD
-+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ F77)
-+ if test -n "$F77" && test "X$F77" != "Xno"; then
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+
-+
-+archive_cmds_need_lc_F77=no
-+allow_undefined_flag_F77=
-+always_export_symbols_F77=no
-+archive_expsym_cmds_F77=
-+export_dynamic_flag_spec_F77=
-+hardcode_direct_F77=no
-+hardcode_libdir_flag_spec_F77=
-+hardcode_libdir_flag_spec_ld_F77=
-+hardcode_libdir_separator_F77=
-+hardcode_minus_L_F77=no
-+hardcode_automatic_F77=no
-+module_cmds_F77=
-+module_expsym_cmds_F77=
-+link_all_deplibs_F77=unknown
-+old_archive_cmds_F77=$old_archive_cmds
-+no_undefined_flag_F77=
-+whole_archive_flag_spec_F77=
-+enable_shared_with_static_runtimes_F77=no
-+
-+# Source file extension for f77 test sources.
-+ac_ext=f
-+
-+# Object file extension for compiled f77 test sources.
-+objext=o
-+objext_F77=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="\
-+ subroutine t
-+ return
-+ end
-+"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="\
-+ program t
-+ end
-+"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${F77-"f77"}
-+compiler=$CC
-+compiler_F77=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+aix[4-9]*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+{ echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6; }
-+
-+GCC_F77="$G77"
-+LD_F77="$LD"
-+
-+lt_prog_compiler_wl_F77=
-+lt_prog_compiler_pic_F77=
-+lt_prog_compiler_static_F77=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_static_F77='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+ lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_F77='-fno-common'
-+ ;;
-+
-+ interix[3-9]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared_F77=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_F77=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic_F77='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ else
-+ lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_F77='-qnocommon'
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-fpic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C 5.9
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ ;;
-+ *Sun\ F*)
-+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ lt_prog_compiler_wl_F77=''
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+
-+ rdos*)
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl_F77='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl_F77='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl_F77='-Qoption ld '
-+ lt_prog_compiler_pic_F77='-PIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic_F77='-Kconform_pic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_can_build_shared_F77=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic_F77='-pic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared_F77=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_F77"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_pic_works_F77=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_F77"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_pic_works_F77=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_F77" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
-+ case $lt_prog_compiler_pic_F77 in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_F77=
-+ lt_prog_compiler_can_build_shared_F77=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_F77=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_static_works_F77=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_static_works_F77=yes
-+ fi
-+ else
-+ lt_cv_prog_compiler_static_works_F77=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_F77" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_F77=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_F77=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_F77=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+ runpath_var=
-+ allow_undefined_flag_F77=
-+ enable_shared_with_static_runtimes_F77=no
-+ archive_cmds_F77=
-+ archive_expsym_cmds_F77=
-+ old_archive_From_new_cmds_F77=
-+ old_archive_from_expsyms_cmds_F77=
-+ export_dynamic_flag_spec_F77=
-+ whole_archive_flag_spec_F77=
-+ thread_safe_flag_spec_F77=
-+ hardcode_libdir_flag_spec_F77=
-+ hardcode_libdir_flag_spec_ld_F77=
-+ hardcode_libdir_separator_F77=
-+ hardcode_direct_F77=no
-+ hardcode_minus_L_F77=no
-+ hardcode_shlibpath_var_F77=unsupported
-+ link_all_deplibs_F77=unknown
-+ hardcode_automatic_F77=no
-+ module_cmds_F77=
-+ module_expsym_cmds_F77=
-+ always_export_symbols_F77=no
-+ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms_F77=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ # Exclude shared library initialization/finalization symbols.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs_F77=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_F77=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix[3-9]*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs_F77=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+
-+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_F77=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ allow_undefined_flag_F77=unsupported
-+ always_export_symbols_F77=no
-+ enable_shared_with_static_runtimes_F77=yes
-+ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ interix[3-9]*)
-+ hardcode_direct_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ gnu* | linux* | k*bsd*-gnu)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*) # Sun C 5.9
-+ whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_sharedflag='-G' ;;
-+ *Sun\ F*) # Sun Fortran 8.3
-+ tmp_sharedflag='-G' ;;
-+ *)
-+ tmp_sharedflag='-shared' ;;
-+ esac
-+ archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs_F77=no
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs_F77=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs_F77=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs_F77" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec_F77=
-+ export_dynamic_flag_spec_F77=
-+ whole_archive_flag_spec_F77=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag_F77=unsupported
-+ always_export_symbols_F77=yes
-+ archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L_F77=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct_F77=unsupported
-+ fi
-+ ;;
-+
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_F77=''
-+ hardcode_direct_F77=yes
-+ hardcode_libdir_separator_F77=':'
-+ link_all_deplibs_F77=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct_F77=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_F77=yes
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_libdir_separator_F77=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_F77=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_F77='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_f77_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_F77="-z nodefs"
-+ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_f77_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_F77=' ${wl}-bernotok'
-+ allow_undefined_flag_F77=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_F77='$convenience'
-+ archive_cmds_need_lc_F77=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec_F77=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec_F77=' '
-+ allow_undefined_flag_F77=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds_F77='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes_F77=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc_F77=no
-+ hardcode_direct_F77=no
-+ hardcode_automatic_F77=yes
-+ hardcode_shlibpath_var_F77=unsupported
-+ whole_archive_flag_spec_F77=''
-+ link_all_deplibs_F77=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_F77=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes
-+ hardcode_minus_L_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ hardcode_direct_F77=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+
-+ hardcode_direct_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-+ hardcode_direct_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+ *)
-+ hardcode_direct_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ link_all_deplibs_F77=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+ allow_undefined_flag_F77=unsupported
-+ archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag_F77=' -expect_unresolved \*'
-+ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag_F77=' -expect_unresolved \*'
-+ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec_F77='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator_F77=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag_F77=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'. GCC discards it without `$wl',
-+ # but is careful enough not to reorder.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ if test "$GCC" = yes; then
-+ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ else
-+ whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
-+ fi
-+ ;;
-+ esac
-+ link_all_deplibs_F77=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_minus_L_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds_F77='$CC -r -o $output$reload_objs'
-+ hardcode_direct_F77=no
-+ ;;
-+ motorola)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_F77=no
-+ export_dynamic_flag_spec_F77='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_F77=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs_F77=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag_F77='${wl}-z,text'
-+ archive_cmds_need_lc_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag_F77='${wl}-z,text'
-+ allow_undefined_flag_F77='${wl}-z,nodefs'
-+ archive_cmds_need_lc_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_F77=':'
-+ link_all_deplibs_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ *)
-+ ld_shlibs_F77=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-+echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-+test "$ld_shlibs_F77" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_F77" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_F77=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_F77 in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_F77
-+ pic_flag=$lt_prog_compiler_pic_F77
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-+ allow_undefined_flag_F77=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_F77=no
-+ else
-+ archive_cmds_need_lc_F77=yes
-+ fi
-+ allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[4-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[3-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-+fi
-+
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-+fi
-+
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_F77=
-+if test -n "$hardcode_libdir_flag_spec_F77" || \
-+ test -n "$runpath_var_F77" || \
-+ test "X$hardcode_automatic_F77" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_F77" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-+ test "$hardcode_minus_L_F77" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_F77=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_F77=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_F77=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-+echo "${ECHO_T}$hardcode_action_F77" >&6; }
-+
-+if test "$hardcode_action_F77" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_F77 \
-+ CC_F77 \
-+ LD_F77 \
-+ lt_prog_compiler_wl_F77 \
-+ lt_prog_compiler_pic_F77 \
-+ lt_prog_compiler_static_F77 \
-+ lt_prog_compiler_no_builtin_flag_F77 \
-+ export_dynamic_flag_spec_F77 \
-+ thread_safe_flag_spec_F77 \
-+ whole_archive_flag_spec_F77 \
-+ enable_shared_with_static_runtimes_F77 \
-+ old_archive_cmds_F77 \
-+ old_archive_from_new_cmds_F77 \
-+ predep_objects_F77 \
-+ postdep_objects_F77 \
-+ predeps_F77 \
-+ postdeps_F77 \
-+ compiler_lib_search_path_F77 \
-+ compiler_lib_search_dirs_F77 \
-+ archive_cmds_F77 \
-+ archive_expsym_cmds_F77 \
-+ postinstall_cmds_F77 \
-+ postuninstall_cmds_F77 \
-+ old_archive_from_expsyms_cmds_F77 \
-+ allow_undefined_flag_F77 \
-+ no_undefined_flag_F77 \
-+ export_symbols_cmds_F77 \
-+ hardcode_libdir_flag_spec_F77 \
-+ hardcode_libdir_flag_spec_ld_F77 \
-+ hardcode_libdir_separator_F77 \
-+ hardcode_automatic_F77 \
-+ module_cmds_F77 \
-+ module_expsym_cmds_F77 \
-+ lt_cv_prog_compiler_c_o_F77 \
-+ fix_srcfile_path_F77 \
-+ exclude_expsyms_F77 \
-+ include_expsyms_F77; do
-+
-+ case $var in
-+ old_archive_cmds_F77 | \
-+ old_archive_from_new_cmds_F77 | \
-+ archive_cmds_F77 | \
-+ archive_expsym_cmds_F77 | \
-+ module_cmds_F77 | \
-+ module_expsym_cmds_F77 | \
-+ old_archive_from_expsyms_cmds_F77 | \
-+ export_symbols_cmds_F77 | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_F77
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_F77
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_F77
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_F77
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_F77
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_F77
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_F77
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_F77
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_F77
-+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_F77
-+module_expsym_cmds=$lt_module_expsym_cmds_F77
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_F77
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_F77
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_F77
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_F77
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_F77
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_F77
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_F77
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_F77
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_F77
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_F77
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_F77
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_F77
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_F77
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ GCJ)
-+ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-+
-+
-+# Source file extension for Java test sources.
-+ac_ext=java
-+
-+# Object file extension for compiled Java test sources.
-+objext=o
-+objext_GCJ=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="class foo {}"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${GCJ-"gcj"}
-+compiler=$CC
-+compiler_GCJ=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# GCJ did not exist at the time GCC didn't implicitly link libc in.
-+archive_cmds_need_lc_GCJ=no
-+
-+old_archive_cmds_GCJ=$old_archive_cmds
-+
-+
-+lt_prog_compiler_no_builtin_flag_GCJ=
-+
-+if test "$GCC" = yes; then
-+ lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_rtti_exceptions=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="-fno-rtti -fno-exceptions"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_rtti_exceptions=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+ lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-+else
-+ :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl_GCJ=
-+lt_prog_compiler_pic_GCJ=
-+lt_prog_compiler_static_GCJ=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_static_GCJ='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_GCJ='-fno-common'
-+ ;;
-+
-+ interix[3-9]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_GCJ=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic_GCJ='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ else
-+ lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_GCJ='-qnocommon'
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-fpic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C 5.9
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ ;;
-+ *Sun\ F*)
-+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ lt_prog_compiler_wl_GCJ=''
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+
-+ rdos*)
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl_GCJ='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl_GCJ='-Qoption ld '
-+ lt_prog_compiler_pic_GCJ='-PIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic_GCJ='-Kconform_pic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic_GCJ='-pic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_GCJ"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_pic_works_GCJ=no
-+ ac_outfile=conftest.$ac_objext
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_pic_works_GCJ=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
-+ case $lt_prog_compiler_pic_GCJ in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_GCJ=
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_GCJ=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_static_works_GCJ=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_static_works_GCJ=yes
-+ fi
-+ else
-+ lt_cv_prog_compiler_static_works_GCJ=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_GCJ" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_GCJ=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_GCJ=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:__oline__: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_GCJ=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+ runpath_var=
-+ allow_undefined_flag_GCJ=
-+ enable_shared_with_static_runtimes_GCJ=no
-+ archive_cmds_GCJ=
-+ archive_expsym_cmds_GCJ=
-+ old_archive_From_new_cmds_GCJ=
-+ old_archive_from_expsyms_cmds_GCJ=
-+ export_dynamic_flag_spec_GCJ=
-+ whole_archive_flag_spec_GCJ=
-+ thread_safe_flag_spec_GCJ=
-+ hardcode_libdir_flag_spec_GCJ=
-+ hardcode_libdir_flag_spec_ld_GCJ=
-+ hardcode_libdir_separator_GCJ=
-+ hardcode_direct_GCJ=no
-+ hardcode_minus_L_GCJ=no
-+ hardcode_shlibpath_var_GCJ=unsupported
-+ link_all_deplibs_GCJ=unknown
-+ hardcode_automatic_GCJ=no
-+ module_cmds_GCJ=
-+ module_expsym_cmds_GCJ=
-+ always_export_symbols_GCJ=no
-+ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms_GCJ=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ # Exclude shared library initialization/finalization symbols.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs_GCJ=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_GCJ=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix[3-9]*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs_GCJ=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+
-+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_GCJ=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ allow_undefined_flag_GCJ=unsupported
-+ always_export_symbols_GCJ=no
-+ enable_shared_with_static_runtimes_GCJ=yes
-+ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ interix[3-9]*)
-+ hardcode_direct_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ gnu* | linux* | k*bsd*-gnu)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*) # Sun C 5.9
-+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_sharedflag='-G' ;;
-+ *Sun\ F*) # Sun Fortran 8.3
-+ tmp_sharedflag='-G' ;;
-+ *)
-+ tmp_sharedflag='-shared' ;;
-+ esac
-+ archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs_GCJ=no
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs_GCJ=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs_GCJ=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs_GCJ" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec_GCJ=
-+ export_dynamic_flag_spec_GCJ=
-+ whole_archive_flag_spec_GCJ=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag_GCJ=unsupported
-+ always_export_symbols_GCJ=yes
-+ archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L_GCJ=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct_GCJ=unsupported
-+ fi
-+ ;;
-+
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_GCJ=''
-+ hardcode_direct_GCJ=yes
-+ hardcode_libdir_separator_GCJ=':'
-+ link_all_deplibs_GCJ=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct_GCJ=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_libdir_separator_GCJ=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_GCJ=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_GCJ='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_GCJ="-z nodefs"
-+ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_GCJ=' ${wl}-bernotok'
-+ allow_undefined_flag_GCJ=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_GCJ='$convenience'
-+ archive_cmds_need_lc_GCJ=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec_GCJ=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec_GCJ=' '
-+ allow_undefined_flag_GCJ=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds_GCJ='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes_GCJ=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_direct_GCJ=no
-+ hardcode_automatic_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=unsupported
-+ whole_archive_flag_spec_GCJ=''
-+ link_all_deplibs_GCJ=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_GCJ=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ hardcode_direct_GCJ=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+
-+ hardcode_direct_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-+ hardcode_direct_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+ *)
-+ hardcode_direct_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ link_all_deplibs_GCJ=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+ allow_undefined_flag_GCJ=unsupported
-+ archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator_GCJ=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag_GCJ=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'. GCC discards it without `$wl',
-+ # but is careful enough not to reorder.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ if test "$GCC" = yes; then
-+ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ else
-+ whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
-+ fi
-+ ;;
-+ esac
-+ link_all_deplibs_GCJ=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-+ hardcode_direct_GCJ=no
-+ ;;
-+ motorola)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_GCJ=no
-+ export_dynamic_flag_spec_GCJ='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_GCJ=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs_GCJ=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag_GCJ='${wl}-z,text'
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag_GCJ='${wl}-z,text'
-+ allow_undefined_flag_GCJ='${wl}-z,nodefs'
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_GCJ=':'
-+ link_all_deplibs_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ *)
-+ ld_shlibs_GCJ=no
-+ ;;
-+ esac
-+ fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-+echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-+test "$ld_shlibs_GCJ" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_GCJ" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_GCJ=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_GCJ in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_GCJ
-+ pic_flag=$lt_prog_compiler_pic_GCJ
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-+ allow_undefined_flag_GCJ=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_GCJ=no
-+ else
-+ archive_cmds_need_lc_GCJ=yes
-+ fi
-+ allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[4-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[3-9]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-+fi
-+
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-+fi
-+
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_GCJ=
-+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-+ test -n "$runpath_var_GCJ" || \
-+ test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_GCJ" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-+ test "$hardcode_minus_L_GCJ" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_GCJ=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_GCJ=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_GCJ=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-+echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-+
-+if test "$hardcode_action_GCJ" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_GCJ \
-+ CC_GCJ \
-+ LD_GCJ \
-+ lt_prog_compiler_wl_GCJ \
-+ lt_prog_compiler_pic_GCJ \
-+ lt_prog_compiler_static_GCJ \
-+ lt_prog_compiler_no_builtin_flag_GCJ \
-+ export_dynamic_flag_spec_GCJ \
-+ thread_safe_flag_spec_GCJ \
-+ whole_archive_flag_spec_GCJ \
-+ enable_shared_with_static_runtimes_GCJ \
-+ old_archive_cmds_GCJ \
-+ old_archive_from_new_cmds_GCJ \
-+ predep_objects_GCJ \
-+ postdep_objects_GCJ \
-+ predeps_GCJ \
-+ postdeps_GCJ \
-+ compiler_lib_search_path_GCJ \
-+ compiler_lib_search_dirs_GCJ \
-+ archive_cmds_GCJ \
-+ archive_expsym_cmds_GCJ \
-+ postinstall_cmds_GCJ \
-+ postuninstall_cmds_GCJ \
-+ old_archive_from_expsyms_cmds_GCJ \
-+ allow_undefined_flag_GCJ \
-+ no_undefined_flag_GCJ \
-+ export_symbols_cmds_GCJ \
-+ hardcode_libdir_flag_spec_GCJ \
-+ hardcode_libdir_flag_spec_ld_GCJ \
-+ hardcode_libdir_separator_GCJ \
-+ hardcode_automatic_GCJ \
-+ module_cmds_GCJ \
-+ module_expsym_cmds_GCJ \
-+ lt_cv_prog_compiler_c_o_GCJ \
-+ fix_srcfile_path_GCJ \
-+ exclude_expsyms_GCJ \
-+ include_expsyms_GCJ; do
-+
-+ case $var in
-+ old_archive_cmds_GCJ | \
-+ old_archive_from_new_cmds_GCJ | \
-+ archive_cmds_GCJ | \
-+ archive_expsym_cmds_GCJ | \
-+ module_cmds_GCJ | \
-+ module_expsym_cmds_GCJ | \
-+ old_archive_from_expsyms_cmds_GCJ | \
-+ export_symbols_cmds_GCJ | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_GCJ
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_GCJ
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_GCJ
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_GCJ
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_GCJ
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_GCJ
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_GCJ
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_GCJ
-+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_GCJ
-+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_GCJ
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_GCJ
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_GCJ
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_GCJ
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_GCJ
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_GCJ
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_GCJ
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_GCJ
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_GCJ
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_GCJ
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_GCJ
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ RC)
-+
-+
-+# Source file extension for RC test sources.
-+ac_ext=rc
-+
-+# Object file extension for compiled RC test sources.
-+objext=o
-+objext_RC=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="$lt_simple_compile_test_code"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${RC-"windres"}
-+compiler=$CC
-+compiler_RC=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+lt_cv_prog_compiler_c_o_RC=yes
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_RC \
-+ CC_RC \
-+ LD_RC \
-+ lt_prog_compiler_wl_RC \
-+ lt_prog_compiler_pic_RC \
-+ lt_prog_compiler_static_RC \
-+ lt_prog_compiler_no_builtin_flag_RC \
-+ export_dynamic_flag_spec_RC \
-+ thread_safe_flag_spec_RC \
-+ whole_archive_flag_spec_RC \
-+ enable_shared_with_static_runtimes_RC \
-+ old_archive_cmds_RC \
-+ old_archive_from_new_cmds_RC \
-+ predep_objects_RC \
-+ postdep_objects_RC \
-+ predeps_RC \
-+ postdeps_RC \
-+ compiler_lib_search_path_RC \
-+ compiler_lib_search_dirs_RC \
-+ archive_cmds_RC \
-+ archive_expsym_cmds_RC \
-+ postinstall_cmds_RC \
-+ postuninstall_cmds_RC \
-+ old_archive_from_expsyms_cmds_RC \
-+ allow_undefined_flag_RC \
-+ no_undefined_flag_RC \
-+ export_symbols_cmds_RC \
-+ hardcode_libdir_flag_spec_RC \
-+ hardcode_libdir_flag_spec_ld_RC \
-+ hardcode_libdir_separator_RC \
-+ hardcode_automatic_RC \
-+ module_cmds_RC \
-+ module_expsym_cmds_RC \
-+ lt_cv_prog_compiler_c_o_RC \
-+ fix_srcfile_path_RC \
-+ exclude_expsyms_RC \
-+ include_expsyms_RC; do
-+
-+ case $var in
-+ old_archive_cmds_RC | \
-+ old_archive_from_new_cmds_RC | \
-+ archive_cmds_RC | \
-+ archive_expsym_cmds_RC | \
-+ module_cmds_RC | \
-+ module_expsym_cmds_RC | \
-+ old_archive_from_expsyms_cmds_RC | \
-+ export_symbols_cmds_RC | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_RC
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_RC
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_RC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_RC
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_RC
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_RC
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_RC
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_RC
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_RC
-+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_RC
-+module_expsym_cmds=$lt_module_expsym_cmds_RC
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_RC
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_RC
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_RC
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_RC
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_RC
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_RC
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_RC
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_RC
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_RC
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_RC
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_RC
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_RC
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_RC
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ ;;
-+
-+ *)
-+ { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-+echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+
-+ # Append the new tag name to the list of available tags.
-+ if test -n "$tagname" ; then
-+ available_tags="$available_tags $tagname"
-+ fi
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ # Now substitute the updated list of available tags.
-+ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-+ mv "${ofile}T" "$ofile"
-+ chmod +x "$ofile"
-+ else
-+ rm -f "${ofile}T"
-+ { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-+echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+fi
-+
-+
-+
-+# This can be used to rebuild libtool when needed
-+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-+
-+# Always use our own libtool.
-+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+
-+# Prevent multiple expansion
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+#
-+# Check for AViiON Machines running DGUX
-+#
-+ac_is_dgux=no
-+if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
-+ { echo "$as_me:$LINENO: checking for sys/dg_sys_info.h" >&5
-+echo $ECHO_N "checking for sys/dg_sys_info.h... $ECHO_C" >&6; }
-+if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_dg_sys_info_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_dg_sys_info_h" >&6; }
-+else
-+ # Is the header compilable?
-+{ echo "$as_me:$LINENO: checking sys/dg_sys_info.h usability" >&5
-+echo $ECHO_N "checking sys/dg_sys_info.h usability... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+@%:@include <sys/dg_sys_info.h>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_compiler=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6; }
-+
-+# Is the header present?
-+{ echo "$as_me:$LINENO: checking sys/dg_sys_info.h presence" >&5
-+echo $ECHO_N "checking sys/dg_sys_info.h presence... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+@%:@include <sys/dg_sys_info.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6; }
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: sys/dg_sys_info.h: in the future, the compiler will take precedence" >&2;}
-+ ( cat <<\_ASBOX
-+@%:@@%:@ -------------------------------- @%:@@%:@
-+@%:@@%:@ Report this to Hans_Boehm at hp.com @%:@@%:@
-+@%:@@%:@ -------------------------------- @%:@@%:@
-+_ASBOX
-+ ) | sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+{ echo "$as_me:$LINENO: checking for sys/dg_sys_info.h" >&5
-+echo $ECHO_N "checking for sys/dg_sys_info.h... $ECHO_C" >&6; }
-+if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_sys_dg_sys_info_h=$ac_header_preproc
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_dg_sys_info_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_dg_sys_info_h" >&6; }
-+
-+fi
-+if test $ac_cv_header_sys_dg_sys_info_h = yes; then
-+ ac_is_dgux=yes;
-+fi
-+
-+
-+
-+ ## :GOTCHA: we do not check anything but sys/dg_sys_info.h
-+if test $ac_is_dgux = yes; then
-+ if test "$enable_full_debug" = "yes"; then
-+ CFLAGS="-g -mstandard -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
-+ CXXFLAGS="-g -mstandard -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
-+ else
-+ CFLAGS="-DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
-+ CXXFLAGS="-DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
-+ fi
-+
-+
-+fi
-+
-+
-+# Check whether --with-target-subdir was given.
-+if test "${with_target_subdir+set}" = set; then
-+ withval=$with_target_subdir;
-+fi
-+
-+
-+# Check whether --with-cross-host was given.
-+if test "${with_cross_host+set}" = set; then
-+ withval=$with_cross_host;
-+fi
-+
-+
-+# automake wants to see AC_EXEEXT. But we don't need it. And having
-+# it is actually a problem, because the compiler we're passed can't
-+# necessarily do a full link. So we fool automake here.
-+if false; then
-+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
-+ # to nothing, so nothing would remain between `then' and `fi' if it
-+ # were not for the `:' below.
-+ :
-+
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for threads package to use" >&5
-+echo $ECHO_N "checking for threads package to use... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $THREADS" >&5
-+echo "${ECHO_T}$THREADS" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether Solaris gcc optimization fix is necessary" >&5
-+echo $ECHO_N "checking whether Solaris gcc optimization fix is necessary... $ECHO_C" >&6; }
-+case "$host" in
-+ *aix*)
-+ if test "$GCC" = yes; then
-+ { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+ new_CFLAGS=
-+ for i in $CFLAGS; do
-+ case "$i" in
-+ -O*)
-+ ;;
-+ *)
-+ new_CFLAGS="$new_CFLAGS $i"
-+ ;;
-+ esac
-+ done
-+ CFLAGS="$new_CFLAGS"
-+ else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+ fi
-+ ;;
-+ *) { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; } ;;
-+esac
-+
-+MY_CFLAGS="$CFLAGS"
-+
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define SILENT 1
-+_ACEOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_SIGNALS 1
-+_ACEOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_EXECUTE_PERMISSION 1
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define JAVA_FINALIZATION 1
-+_ACEOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_GCJ_SUPPORT 1
-+_ACEOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define ATOMIC_UNCOLLECTABLE 1
-+_ACEOF
-+
-+
-+if test -n "${with_cross_host}"; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_SIGSET 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_CLOCK 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SMALL_CONFIG 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define NO_DEBUGGING 1
-+_ACEOF
-+
-+fi
-+
-+UNWINDLIBS=
-+# Check whether --enable-full-debug was given.
-+if test "${enable_full_debug+set}" = set; then
-+ enableval=$enable_full_debug; if test "$enable_full_debug" = "yes"; then
-+ { echo "$as_me:$LINENO: WARNING: \"Should define GC_DEBUG and use debug alloc. in clients.\"" >&5
-+echo "$as_me: WARNING: \"Should define GC_DEBUG and use debug alloc. in clients.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define KEEP_BACK_PTRS 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define DBG_HDRS_ALL 1
-+_ACEOF
-+
-+ case $host in
-+ ia64-*-linux* )
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define MAKE_BACK_GRAPH 1
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SAVE_CALL_COUNT 8
-+_ACEOF
-+
-+ { echo "$as_me:$LINENO: checking for backtrace in -lunwind" >&5
-+echo $ECHO_N "checking for backtrace in -lunwind... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_unwind_backtrace+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lunwind $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char backtrace ();
-+int
-+main ()
-+{
-+return backtrace ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
-+ ac_cv_lib_unwind_backtrace=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_cv_lib_unwind_backtrace=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_unwind_backtrace" >&5
-+echo "${ECHO_T}$ac_cv_lib_unwind_backtrace" >&6; }
-+if test $ac_cv_lib_unwind_backtrace = yes; then
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_HAVE_BUILTIN_BACKTRACE 1
-+_ACEOF
-+
-+ UNWINDLIBS=-lunwind
-+ { echo "$as_me:$LINENO: WARNING: \"Client code may need to link against libunwind.\"" >&5
-+echo "$as_me: WARNING: \"Client code may need to link against libunwind.\"" >&2;}
-+
-+fi
-+
-+ ;;
-+ x86-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* )
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define MAKE_BACK_GRAPH 1
-+_ACEOF
-+
-+ { echo "$as_me:$LINENO: WARNING: \"Client must not use -fomit-frame-pointer.\"" >&5
-+echo "$as_me: WARNING: \"Client must not use -fomit-frame-pointer.\"" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define SAVE_CALL_COUNT 8
-+_ACEOF
-+
-+ ;;
-+ i345686-*-dgux*)
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define MAKE_BACK_GRAPH 1
-+_ACEOF
-+
-+ ;;
-+ esac
-+ fi
-+fi
-+
-+
-+
-+
-+# Check whether --enable-redirect-malloc was given.
-+if test "${enable_redirect_malloc+set}" = set; then
-+ enableval=$enable_redirect_malloc;
-+fi
-+
-+
-+if test "${enable_redirect_malloc}" = yes; then
-+ if test "${enable_full_debug}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define REDIRECT_MALLOC GC_debug_malloc_replacement
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define REDIRECT_REALLOC GC_debug_realloc_replacement
-+_ACEOF
-+
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define REDIRECT_FREE GC_debug_free
-+_ACEOF
-+
-+ else
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define REDIRECT_MALLOC GC_malloc
-+_ACEOF
-+
-+ fi
-+fi
-+
-+cat >>confdefs.h <<\_ACEOF
-+@%:@define _IN_LIBGC 1
-+_ACEOF
-+
-+
-+# Check whether --enable-gc-assertions was given.
-+if test "${enable_gc_assertions+set}" = set; then
-+ enableval=$enable_gc_assertions;
-+fi
-+
-+if test "${enable_gc_assertions}" = yes; then
-+ cat >>confdefs.h <<\_ACEOF
-+@%:@define GC_ASSERTIONS 1
-+_ACEOF
-+
-+fi
-+
-+ if test -z "$with_cross_host"; then
-+ USE_LIBDIR_TRUE=
-+ USE_LIBDIR_FALSE='#'
-+else
-+ USE_LIBDIR_TRUE='#'
-+ USE_LIBDIR_FALSE=
-+fi
-+
-+
-+if test "${multilib}" = "yes"; then
-+ multilib_arg="--enable-multilib"
-+else
-+ multilib_arg=
-+fi
-+
-+ac_config_files="$ac_config_files Makefile include/Makefile include/private/Makefile doc/Makefile"
-+
-+ac_config_commands="$ac_config_commands default"
-+
-+cat >confcache <<\_ACEOF
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs, see configure's option --config-cache.
-+# It is not useful on other systems. If it contains results you don't
-+# want to keep, you may remove or edit it.
-+#
-+# config.status only pays attention to the cache file if you give it
-+# the --recheck option to rerun configure.
-+#
-+# `ac_cv_env_foo' variables (set or unset) will be overridden when
-+# loading this file, other *unset* `ac_cv_foo' will be assigned the
-+# following values.
-+
-+_ACEOF
-+
-+# The following way of writing the cache mishandles newlines in values,
-+# but we know of no workaround that is simple, portable, and efficient.
-+# So, we kill variables containing newlines.
-+# Ultrix sh set writes to stderr and can't be redirected directly,
-+# and sets the high bit in the cache file unless we assign to the vars.
-+(
-+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
-+
-+ (set) 2>&1 |
-+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
-+ # `set' does not quote correctly, so add quotes (double-quote
-+ # substitution turns \\\\ into \\, and sed turns \\ into \).
-+ sed -n \
-+ "s/'/'\\\\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-+ ;; #(
-+ *)
-+ # `set' quotes correctly as required by POSIX, so do not add quotes.
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-+ ;;
-+ esac |
-+ sort
-+) |
-+ sed '
-+ /^ac_cv_env_/b end
-+ t clear
-+ :clear
-+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-+ t end
-+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ :end' >>confcache
-+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-+ if test -w "$cache_file"; then
-+ test "x$cache_file" != "x/dev/null" &&
-+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+echo "$as_me: updating cache $cache_file" >&6;}
-+ cat confcache >$cache_file
-+ else
-+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-+ fi
-+fi
-+rm -f confcache
-+
-+test "x$prefix" = xNONE && prefix=$ac_default_prefix
-+# Let make expand exec_prefix.
-+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-+
-+# Transform confdefs.h into DEFS.
-+# Protect against shell expansion while executing Makefile rules.
-+# Protect against Makefile macro expansion.
-+#
-+# If the first sed substitution is executed (which looks for macros that
-+# take arguments), then branch to the quote section. Otherwise,
-+# look for a macro that doesn't take arguments.
-+ac_script='
-+t clear
-+:clear
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-+t quote
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-+t quote
-+b any
-+:quote
-+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-+s/\[/\\&/g
-+s/\]/\\&/g
-+s/\$/$$/g
-+H
-+:any
-+${
-+ g
-+ s/^\n//
-+ s/\n/ /g
-+ p
-+}
-+'
-+DEFS=`sed -n "$ac_script" confdefs.h`
-+
-+
-+ac_libobjs=
-+ac_ltlibobjs=
-+for ac_i in : $LIB@&t at OBJS; do test "x$ac_i" = x: && continue
-+ # 1. Remove the extension, and $U if already installed.
-+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-+ ac_i=`echo "$ac_i" | sed "$ac_script"`
-+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
-+ # will be set to the directory where LIBOBJS objects are built.
-+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-+done
-+LIB@&t at OBJS=$ac_libobjs
-+
-+LTLIBOBJS=$ac_ltlibobjs
-+
-+
-+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCCAS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"am__fastdepCCAS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${POWERPC_DARWIN_TRUE}" && test -z "${POWERPC_DARWIN_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"POWERPC_DARWIN\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"POWERPC_DARWIN\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${COMPILER_XLC_TRUE}" && test -z "${COMPILER_XLC_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"COMPILER_XLC\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"COMPILER_XLC\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${CPLUSPLUS_TRUE}" && test -z "${CPLUSPLUS_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"CPLUSPLUS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"CPLUSPLUS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${USE_LIBDIR_TRUE}" && test -z "${USE_LIBDIR_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"USE_LIBDIR\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"USE_LIBDIR\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+: ${CONFIG_STATUS=./config.status}
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF
-+#! $SHELL
-+# Generated by $as_me.
-+# Run this file to recreate the current configuration.
-+# Compiler output produced by configure, useful for debugging
-+# configure, is in config.log if it exists.
-+
-+debug=false
-+ac_cs_recheck=false
-+ac_cs_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
-+ sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
-+ N
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-+ t loop
-+ s/-\n.*//
-+ ' >$as_me.lineno &&
-+ chmod +x "$as_me.lineno" ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+ as_ln_s='cp -p'
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ test -d ./-p && rmdir ./-p
-+ as_mkdir_p=false
-+fi
-+
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+exec 6>&1
-+
-+# Save the log message, to keep $[0] and so on meaningful, and to
-+# report actual input values of CONFIG_FILES etc. instead of their
-+# values after options handling.
-+ac_log="
-+This file was extended by libgc-mono $as_me 6.6, which was
-+generated by GNU Autoconf 2.61. Invocation command line was
-+
-+ CONFIG_FILES = $CONFIG_FILES
-+ CONFIG_HEADERS = $CONFIG_HEADERS
-+ CONFIG_LINKS = $CONFIG_LINKS
-+ CONFIG_COMMANDS = $CONFIG_COMMANDS
-+ $ $0 $@
-+
-+on `(hostname || uname -n) 2>/dev/null | sed 1q`
-+"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+# Files that config.status was made for.
-+config_files="$ac_config_files"
-+config_commands="$ac_config_commands"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ac_cs_usage="\
-+\`$as_me' instantiates files from templates according to the
-+current configuration.
-+
-+Usage: $0 [OPTIONS] [FILE]...
-+
-+ -h, --help print this help, then exit
-+ -V, --version print version number and configuration settings, then exit
-+ -q, --quiet do not print progress messages
-+ -d, --debug don't remove temporary files
-+ --recheck update $as_me by reconfiguring in the same conditions
-+ --file=FILE[:TEMPLATE]
-+ instantiate the configuration file FILE
-+
-+Configuration files:
-+$config_files
-+
-+Configuration commands:
-+$config_commands
-+
-+Report bugs to <bug-autoconf at gnu.org>."
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ac_cs_version="\\
-+libgc-mono config.status 6.6
-+configured by $0, generated by GNU Autoconf 2.61,
-+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-+
-+Copyright (C) 2006 Free Software Foundation, Inc.
-+This config.status script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it."
-+
-+ac_pwd='$ac_pwd'
-+srcdir='$srcdir'
-+INSTALL='$INSTALL'
-+MKDIR_P='$MKDIR_P'
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If no file are specified by the user, then we need to provide default
-+# value. By we need to know if files were specified by the user.
-+ac_need_defaults=:
-+while test $# != 0
-+do
-+ case $1 in
-+ --*=*)
-+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-+ ac_shift=:
-+ ;;
-+ *)
-+ ac_option=$1
-+ ac_optarg=$2
-+ ac_shift=shift
-+ ;;
-+ esac
-+
-+ case $ac_option in
-+ # Handling of the options.
-+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-+ ac_cs_recheck=: ;;
-+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-+ echo "$ac_cs_version"; exit ;;
-+ --debug | --debu | --deb | --de | --d | -d )
-+ debug=: ;;
-+ --file | --fil | --fi | --f )
-+ $ac_shift
-+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+ ac_need_defaults=false;;
-+ --he | --h | --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit ;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
-+ ac_cs_silent=: ;;
-+
-+ # This is an error.
-+ -*) { echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2
-+ { (exit 1); exit 1; }; } ;;
-+
-+ *) ac_config_targets="$ac_config_targets $1"
-+ ac_need_defaults=false ;;
-+
-+ esac
-+ shift
-+done
-+
-+ac_configure_extra_args=
-+
-+if $ac_cs_silent; then
-+ exec 6>/dev/null
-+ ac_configure_extra_args="$ac_configure_extra_args --silent"
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+if \$ac_cs_recheck; then
-+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ CONFIG_SHELL=$SHELL
-+ export CONFIG_SHELL
-+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX
-+@%:@@%:@ Running $as_me. @%:@@%:@
-+_ASBOX
-+ echo "$ac_log"
-+} >&5
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+#
-+# INIT-COMMANDS
-+#
-+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-+srcdir=${srcdir}
-+host=${host}
-+CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+CC="${CC}"
-+DEFS="$DEFS"
-+
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+# Handling of arguments.
-+for ac_config_target in $ac_config_targets
-+do
-+ case $ac_config_target in
-+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+ "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
-+ "include/private/Makefile") CONFIG_FILES="$CONFIG_FILES include/private/Makefile" ;;
-+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-+ "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
-+
-+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
-+done
-+
-+
-+# If the user did not use the arguments to specify the items to instantiate,
-+# then the envvar interface is used. Set only those that are not.
-+# We use the long form for the default assignment because of an extremely
-+# bizarre bug on SunOS 4.1.3.
-+if $ac_need_defaults; then
-+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-+fi
-+
-+# Have a temporary directory for convenience. Make it in the build tree
-+# simply because there is no reason against having it here, and in addition,
-+# creating and moving files from /tmp can sometimes cause problems.
-+# Hook for its removal unless debugging.
-+# Note that there is a small window in which the directory will not be cleaned:
-+# after its creation but before its name has been assigned to `$tmp'.
-+$debug ||
-+{
-+ tmp=
-+ trap 'exit_status=$?
-+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-+' 0
-+ trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-+# Create a (secure) tmp directory for tmp files.
-+
-+{
-+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-+ test -n "$tmp" && test -d "$tmp"
-+} ||
-+{
-+ tmp=./conf$$-$RANDOM
-+ (umask 077 && mkdir "$tmp")
-+} ||
-+{
-+ echo "$me: cannot create a temporary directory in ." >&2
-+ { (exit 1); exit 1; }
-+}
-+
-+#
-+# Set up the sed scripts for CONFIG_FILES section.
-+#
-+
-+# No need to generate the scripts if there are no CONFIG_FILES.
-+# This happens for instance when ./config.status config.h
-+if test -n "$CONFIG_FILES"; then
-+
-+_ACEOF
-+
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+ cat >conf$$subs.sed <<_ACEOF
-+SHELL!$SHELL$ac_delim
-+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-+exec_prefix!$exec_prefix$ac_delim
-+prefix!$prefix$ac_delim
-+program_transform_name!$program_transform_name$ac_delim
-+bindir!$bindir$ac_delim
-+sbindir!$sbindir$ac_delim
-+libexecdir!$libexecdir$ac_delim
-+datarootdir!$datarootdir$ac_delim
-+datadir!$datadir$ac_delim
-+sysconfdir!$sysconfdir$ac_delim
-+sharedstatedir!$sharedstatedir$ac_delim
-+localstatedir!$localstatedir$ac_delim
-+includedir!$includedir$ac_delim
-+oldincludedir!$oldincludedir$ac_delim
-+docdir!$docdir$ac_delim
-+infodir!$infodir$ac_delim
-+htmldir!$htmldir$ac_delim
-+dvidir!$dvidir$ac_delim
-+pdfdir!$pdfdir$ac_delim
-+psdir!$psdir$ac_delim
-+libdir!$libdir$ac_delim
-+localedir!$localedir$ac_delim
-+mandir!$mandir$ac_delim
-+DEFS!$DEFS$ac_delim
-+ECHO_C!$ECHO_C$ac_delim
-+ECHO_N!$ECHO_N$ac_delim
-+ECHO_T!$ECHO_T$ac_delim
-+LIBS!$LIBS$ac_delim
-+build_alias!$build_alias$ac_delim
-+host_alias!$host_alias$ac_delim
-+target_alias!$target_alias$ac_delim
-+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-+INSTALL_DATA!$INSTALL_DATA$ac_delim
-+am__isrc!$am__isrc$ac_delim
-+CYGPATH_W!$CYGPATH_W$ac_delim
-+PACKAGE!$PACKAGE$ac_delim
-+VERSION!$VERSION$ac_delim
-+ACLOCAL!$ACLOCAL$ac_delim
-+AUTOCONF!$AUTOCONF$ac_delim
-+AUTOMAKE!$AUTOMAKE$ac_delim
-+AUTOHEADER!$AUTOHEADER$ac_delim
-+MAKEINFO!$MAKEINFO$ac_delim
-+install_sh!$install_sh$ac_delim
-+STRIP!$STRIP$ac_delim
-+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-+mkdir_p!$mkdir_p$ac_delim
-+AWK!$AWK$ac_delim
-+SET_MAKE!$SET_MAKE$ac_delim
-+am__leading_dot!$am__leading_dot$ac_delim
-+AMTAR!$AMTAR$ac_delim
-+am__tar!$am__tar$ac_delim
-+am__untar!$am__untar$ac_delim
-+build!$build$ac_delim
-+build_cpu!$build_cpu$ac_delim
-+build_vendor!$build_vendor$ac_delim
-+build_os!$build_os$ac_delim
-+host!$host$ac_delim
-+host_cpu!$host_cpu$ac_delim
-+host_vendor!$host_vendor$ac_delim
-+host_os!$host_os$ac_delim
-+GC_VERSION!$GC_VERSION$ac_delim
-+CC!$CC$ac_delim
-+CFLAGS!$CFLAGS$ac_delim
-+LDFLAGS!$LDFLAGS$ac_delim
-+CPPFLAGS!$CPPFLAGS$ac_delim
-+ac_ct_CC!$ac_ct_CC$ac_delim
-+EXEEXT!$EXEEXT$ac_delim
-+OBJEXT!$OBJEXT$ac_delim
-+DEPDIR!$DEPDIR$ac_delim
-+am__include!$am__include$ac_delim
-+am__quote!$am__quote$ac_delim
-+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-+CCDEPMODE!$CCDEPMODE$ac_delim
-+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-+CXX!$CXX$ac_delim
-+CXXFLAGS!$CXXFLAGS$ac_delim
-+ac_ct_CXX!$ac_ct_CXX$ac_delim
-+CXXDEPMODE!$CXXDEPMODE$ac_delim
-+am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
-+am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
-+CCAS!$CCAS$ac_delim
-+CCASFLAGS!$CCASFLAGS$ac_delim
-+CCASDEPMODE!$CCASDEPMODE$ac_delim
-+am__fastdepCCAS_TRUE!$am__fastdepCCAS_TRUE$ac_delim
-+am__fastdepCCAS_FALSE!$am__fastdepCCAS_FALSE$ac_delim
-+AR!$AR$ac_delim
-+RANLIB!$RANLIB$ac_delim
-+_ACEOF
-+
-+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
-+ break
-+ elif $ac_last_try; then
-+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+ fi
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+ ac_eof=`expr $ac_eof + 1`
-+fi
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+_ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+ cat >conf$$subs.sed <<_ACEOF
-+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
-+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
-+MAINT!$MAINT$ac_delim
-+GC_CFLAGS!$GC_CFLAGS$ac_delim
-+THREADDLLIBS!$THREADDLLIBS$ac_delim
-+POWERPC_DARWIN_TRUE!$POWERPC_DARWIN_TRUE$ac_delim
-+POWERPC_DARWIN_FALSE!$POWERPC_DARWIN_FALSE$ac_delim
-+COMPILER_XLC_TRUE!$COMPILER_XLC_TRUE$ac_delim
-+COMPILER_XLC_FALSE!$COMPILER_XLC_FALSE$ac_delim
-+EXTRA_TEST_LIBS!$EXTRA_TEST_LIBS$ac_delim
-+target_all!$target_all$ac_delim
-+CPLUSPLUS_TRUE!$CPLUSPLUS_TRUE$ac_delim
-+CPLUSPLUS_FALSE!$CPLUSPLUS_FALSE$ac_delim
-+INCLUDES!$INCLUDES$ac_delim
-+CXXINCLUDES!$CXXINCLUDES$ac_delim
-+addobjs!$addobjs$ac_delim
-+addincludes!$addincludes$ac_delim
-+addlibs!$addlibs$ac_delim
-+addtests!$addtests$ac_delim
-+SED!$SED$ac_delim
-+GREP!$GREP$ac_delim
-+EGREP!$EGREP$ac_delim
-+LN_S!$LN_S$ac_delim
-+ECHO!$ECHO$ac_delim
-+DSYMUTIL!$DSYMUTIL$ac_delim
-+NMEDIT!$NMEDIT$ac_delim
-+CPP!$CPP$ac_delim
-+CXXCPP!$CXXCPP$ac_delim
-+F77!$F77$ac_delim
-+FFLAGS!$FFLAGS$ac_delim
-+ac_ct_F77!$ac_ct_F77$ac_delim
-+LIBTOOL!$LIBTOOL$ac_delim
-+MY_CFLAGS!$MY_CFLAGS$ac_delim
-+UNWINDLIBS!$UNWINDLIBS$ac_delim
-+USE_LIBDIR_TRUE!$USE_LIBDIR_TRUE$ac_delim
-+USE_LIBDIR_FALSE!$USE_LIBDIR_FALSE$ac_delim
-+LIB@&t at OBJS!$LIB@&t at OBJS$ac_delim
-+LTLIBOBJS!$LTLIBOBJS$ac_delim
-+_ACEOF
-+
-+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 38; then
-+ break
-+ elif $ac_last_try; then
-+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+ fi
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+ ac_eof=`expr $ac_eof + 1`
-+fi
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-+_ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+:end
-+s/|#_!!_#|//g
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/
-+s/:*\${srcdir}:*/:/
-+s/:*@srcdir@:*/:/
-+s/^\([^=]*=[ ]*\):*/\1/
-+s/:*$//
-+s/^[^=]*=[ ]*$//
-+}'
-+fi
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+fi # test -n "$CONFIG_FILES"
-+
-+
-+for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS
-+do
-+ case $ac_tag in
-+ :[FHLC]) ac_mode=$ac_tag; continue;;
-+ esac
-+ case $ac_mode$ac_tag in
-+ :[FHL]*:*);;
-+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ :[FH]-) ac_tag=-:-;;
-+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-+ esac
-+ ac_save_IFS=$IFS
-+ IFS=:
-+ set x $ac_tag
-+ IFS=$ac_save_IFS
-+ shift
-+ ac_file=$1
-+ shift
-+
-+ case $ac_mode in
-+ :L) ac_source=$1;;
-+ :[FH])
-+ ac_file_inputs=
-+ for ac_f
-+ do
-+ case $ac_f in
-+ -) ac_f="$tmp/stdin";;
-+ *) # Look for the file first in the build tree, then in the source tree
-+ # (if the path is not absolute). The absolute path cannot be DOS-style,
-+ # because $ac_f cannot contain `:'.
-+ test -f "$ac_f" ||
-+ case $ac_f in
-+ [\\/$]*) false;;
-+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-+ esac ||
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
-+ ac_file_inputs="$ac_file_inputs $ac_f"
-+ done
-+
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ configure_input="Generated from "`IFS=:
-+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-+ if test x"$ac_file" != x-; then
-+ configure_input="$ac_file. $configure_input"
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ fi
-+
-+ case $ac_tag in
-+ *:-:* | *:-) cat >"$tmp/stdin";;
-+ esac
-+ ;;
-+ esac
-+
-+ ac_dir=`$as_dirname -- "$ac_file" ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ { as_dir="$ac_dir"
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-+ as_dirs=
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
-+ done
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+ ac_builddir=.
-+
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-+
-+case $srcdir in
-+ .) # We are building in place.
-+ ac_srcdir=.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+
-+ case $ac_mode in
-+ :F)
-+ #
-+ # CONFIG_FILE
-+ #
-+
-+ case $INSTALL in
-+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-+ esac
-+ ac_MKDIR_P=$MKDIR_P
-+ case $MKDIR_P in
-+ [\\/$]* | ?:[\\/]* ) ;;
-+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
-+ esac
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If the template does not know about datarootdir, expand it.
-+# FIXME: This hack should be removed a few years after 2.60.
-+ac_datarootdir_hack=; ac_datarootdir_seen=
-+
-+case `sed -n '/datarootdir/ {
-+ p
-+ q
-+}
-+/@datadir@/p
-+/@docdir@/p
-+/@infodir@/p
-+/@localedir@/p
-+/@mandir@/p
-+' $ac_file_inputs` in
-+*datarootdir*) ac_datarootdir_seen=yes;;
-+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ ac_datarootdir_hack='
-+ s&@datadir@&$datadir&g
-+ s&@docdir@&$docdir&g
-+ s&@infodir@&$infodir&g
-+ s&@localedir@&$localedir&g
-+ s&@mandir@&$mandir&g
-+ s&\\\${datarootdir}&$datarootdir&g' ;;
-+esac
-+_ACEOF
-+
-+# Neutralize VPATH when `$srcdir' = `.'.
-+# Shell code in configure.ac might set extrasub.
-+# FIXME: do we really want to maintain this feature?
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ sed "$ac_vpsub
-+$extrasub
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+:t
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+s&@configure_input@&$configure_input&;t t
-+s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@srcdir@&$ac_srcdir&;t t
-+s&@abs_srcdir@&$ac_abs_srcdir&;t t
-+s&@top_srcdir@&$ac_top_srcdir&;t t
-+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-+s&@builddir@&$ac_builddir&;t t
-+s&@abs_builddir@&$ac_abs_builddir&;t t
-+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-+s&@INSTALL@&$ac_INSTALL&;t t
-+s&@MKDIR_P@&$ac_MKDIR_P&;t t
-+$ac_datarootdir_hack
-+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-+
-+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&5
-+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&2;}
-+
-+ rm -f "$tmp/stdin"
-+ case $ac_file in
-+ -) cat "$tmp/out"; rm -f "$tmp/out";;
-+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-+ esac
-+ ;;
-+
-+
-+ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-+echo "$as_me: executing $ac_file commands" >&6;}
-+ ;;
-+ esac
-+
-+
-+ case $ac_file$ac_mode in
-+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-+ # Strip MF so we end up with the name of the file.
-+ mf=`echo "$mf" | sed -e 's/:.*$//'`
-+ # Check whether this is an Automake generated Makefile or not.
-+ # We used to match only the files named `Makefile.in', but
-+ # some people rename them; so instead we look at the file content.
-+ # Grep'ing the first line is not enough: some people post-process
-+ # each Makefile.in and add a new line on top of each file to say so.
-+ # Grep'ing the whole file is not good either: AIX grep has a line
-+ # limit of 2048, but all sed's we know have understand at least 4000.
-+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-+ dirpart=`$as_dirname -- "$mf" ||
-+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$mf" : 'X\(//\)[^/]' \| \
-+ X"$mf" : 'X\(//\)$' \| \
-+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$mf" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ else
-+ continue
-+ fi
-+ # Extract the definition of DEPDIR, am__include, and am__quote
-+ # from the Makefile without running `make'.
-+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-+ test -z "$DEPDIR" && continue
-+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
-+ test -z "am__include" && continue
-+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-+ # When using ansi2knr, U may be empty or an underscore; expand it
-+ U=`sed -n 's/^U = //p' < "$mf"`
-+ # Find all dependency output files, they are included files with
-+ # $(DEPDIR) in their names. We invoke sed twice because it is the
-+ # simplest approach to changing $(DEPDIR) to its actual value in the
-+ # expansion.
-+ for file in `sed -n "
-+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-+ # Make sure the directory exists.
-+ test -f "$dirpart/$file" && continue
-+ fdir=`$as_dirname -- "$file" ||
-+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$file" : 'X\(//\)[^/]' \| \
-+ X"$file" : 'X\(//\)$' \| \
-+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ { as_dir=$dirpart/$fdir
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-+ as_dirs=
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
-+ done
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+ # echo "creating $dirpart/$file"
-+ echo '# dummy' > "$dirpart/$file"
-+ done
-+done
-+ ;;
-+
-+ esac
-+done # for ac_tag
-+
-+
-+{ (exit 0); exit 0; }
-+_ACEOF
-+chmod +x $CONFIG_STATUS
-+ac_clean_files=$ac_clean_files_save
-+
-+
-+# configure is writing to config.log, and then calls config.status.
-+# config.status does its own redirection, appending to config.log.
-+# Unfortunately, on DOS this fails, as config.log is still kept open
-+# by configure, so config.status won't be able to write to it; its
-+# output is simply discarded. So we exec the FD to /dev/null,
-+# effectively closing config.log, so it can be properly (re)opened and
-+# appended to by config.status. When coming back to configure, we
-+# need to make the FD available again.
-+if test "$no_create" != yes; then
-+ ac_cs_success=:
-+ ac_config_status_args=
-+ test "$silent" = yes &&
-+ ac_config_status_args="$ac_config_status_args --quiet"
-+ exec 5>/dev/null
-+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-+ exec 5>>config.log
-+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-+ # would make configure fail if this is the last instruction.
-+ $ac_cs_success || { (exit 1); exit 1; }
-+fi
-+
-diff -urNad mono-2.0.1~/libgc/autom4te.cache/requests mono-2.0.1/libgc/autom4te.cache/requests
---- mono-2.0.1~/libgc/autom4te.cache/requests 1970-01-01 01:00:00.000000000 +0100
-+++ mono-2.0.1/libgc/autom4te.cache/requests 2008-11-11 23:29:26.000000000 +0100
-@@ -0,0 +1,218 @@
-+# This file was generated by Autom4te Mon Aug 11 20:59:21 PDT 2008.
-+# It contains the lists of macros which have been traced.
-+# It can be safely removed.
-+
-+ at request = (
-+ bless( [
-+ '0',
-+ 1,
-+ [
-+ '/usr/share/autoconf'
-+ ],
-+ [
-+ '/usr/share/autoconf/autoconf/autoconf.m4f',
-+ '/usr/share/aclocal/libtool.m4',
-+ '/usr/share/aclocal-1.10/amversion.m4',
-+ '/usr/share/aclocal-1.10/as.m4',
-+ '/usr/share/aclocal-1.10/auxdir.m4',
-+ '/usr/share/aclocal-1.10/cond.m4',
-+ '/usr/share/aclocal-1.10/depend.m4',
-+ '/usr/share/aclocal-1.10/depout.m4',
-+ '/usr/share/aclocal-1.10/init.m4',
-+ '/usr/share/aclocal-1.10/install-sh.m4',
-+ '/usr/share/aclocal-1.10/lead-dot.m4',
-+ '/usr/share/aclocal-1.10/maintainer.m4',
-+ '/usr/share/aclocal-1.10/make.m4',
-+ '/usr/share/aclocal-1.10/missing.m4',
-+ '/usr/share/aclocal-1.10/mkdirp.m4',
-+ '/usr/share/aclocal-1.10/options.m4',
-+ '/usr/share/aclocal-1.10/runlog.m4',
-+ '/usr/share/aclocal-1.10/sanity.m4',
-+ '/usr/share/aclocal-1.10/strip.m4',
-+ '/usr/share/aclocal-1.10/substnot.m4',
-+ '/usr/share/aclocal-1.10/tar.m4',
-+ 'acinclude.m4',
-+ 'configure.in'
-+ ],
-+ {
-+ '_LT_AC_TAGCONFIG' => 1,
-+ 'AM_ENABLE_STATIC' => 1,
-+ 'm4_pattern_forbid' => 1,
-+ 'AC_LIBTOOL_COMPILER_OPTION' => 1,
-+ 'AC_LIBTOOL_LANG_RC_CONFIG' => 1,
-+ '_LT_AC_SHELL_INIT' => 1,
-+ 'AC_DISABLE_SHARED' => 1,
-+ 'AC_DEFUN' => 1,
-+ '_LT_COMPILER_BOILERPLATE' => 1,
-+ 'AC_PROG_LIBTOOL' => 1,
-+ 'AC_LIBTOOL_SETUP' => 1,
-+ 'AC_LIBTOOL_WIN32_DLL' => 1,
-+ '_LT_AC_LANG_CXX_CONFIG' => 1,
-+ 'AM_PROG_MKDIR_P' => 1,
-+ 'AC_PROG_LD_RELOAD_FLAG' => 1,
-+ 'AM_AUTOMAKE_VERSION' => 1,
-+ 'AM_MISSING_HAS_RUN' => 1,
-+ 'AM_MISSING_PROG' => 1,
-+ 'AC_LIBTOOL_DLOPEN_SELF' => 1,
-+ 'AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH' => 1,
-+ '_LT_AC_LANG_C_CONFIG' => 1,
-+ 'AC_LIBTOOL_PROG_LD_SHLIBS' => 1,
-+ 'AM_PROG_INSTALL_STRIP' => 1,
-+ '_m4_warn' => 1,
-+ 'AC_LIBTOOL_OBJDIR' => 1,
-+ 'AM_SANITY_CHECK' => 1,
-+ 'AC_LIBTOOL_LINKER_OPTION' => 1,
-+ 'AC_LIBTOOL_PROG_COMPILER_PIC' => 1,
-+ 'AC_LIBTOOL_LANG_GCJ_CONFIG' => 1,
-+ '_LT_AC_CHECK_DLFCN' => 1,
-+ 'AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE' => 1,
-+ 'AC_LIBTOOL_CXX' => 1,
-+ 'LT_AC_PROG_RC' => 1,
-+ '_AM_PROG_TAR' => 1,
-+ 'AC_LIBTOOL_GCJ' => 1,
-+ 'LT_AC_PROG_GCJ' => 1,
-+ 'AM_DEP_TRACK' => 1,
-+ '_LT_AC_PROG_CXXCPP' => 1,
-+ 'AM_DISABLE_STATIC' => 1,
-+ '_AC_PROG_LIBTOOL' => 1,
-+ '_LT_AC_LANG_F77' => 1,
-+ 'AC_LIBTOOL_CONFIG' => 1,
-+ '_AM_IF_OPTION' => 1,
-+ '_AM_SUBST_NOTMAKE' => 1,
-+ 'AC_PATH_TOOL_PREFIX' => 1,
-+ 'AC_LIBTOOL_F77' => 1,
-+ '_AM_AUTOCONF_VERSION' => 1,
-+ 'm4_pattern_allow' => 1,
-+ 'AM_DISABLE_SHARED' => 1,
-+ 'AM_SET_LEADING_DOT' => 1,
-+ '_LT_AC_LANG_CXX' => 1,
-+ 'AM_PROG_LIBTOOL' => 1,
-+ '_AM_DEPENDENCIES' => 1,
-+ '_LT_AC_FILE_LTDLL_C' => 1,
-+ 'AM_PROG_LD' => 1,
-+ 'AC_LIBTOOL_LANG_C_CONFIG' => 1,
-+ '_LT_AC_SYS_COMPILER' => 1,
-+ 'AM_PROG_NM' => 1,
-+ 'AU_DEFUN' => 1,
-+ 'AC_PROG_NM' => 1,
-+ 'AC_LIBTOOL_DLOPEN' => 1,
-+ 'AC_LIBLTDL_CONVENIENCE' => 1,
-+ 'AC_PROG_LD' => 1,
-+ 'AC_PROG_LD_GNU' => 1,
-+ 'AC_ENABLE_FAST_INSTALL' => 1,
-+ 'AC_DEPLIBS_CHECK_METHOD' => 1,
-+ 'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1,
-+ 'jm_MAINTAINER_MODE' => 1,
-+ 'AC_LIBLTDL_INSTALLABLE' => 1,
-+ 'AC_LIBTOOL_SYS_DYNAMIC_LINKER' => 1,
-+ '_AM_SET_OPTION' => 1,
-+ '_LT_LINKER_BOILERPLATE' => 1,
-+ 'AC_LIBTOOL_PROG_CC_C_O' => 1,
-+ 'AC_LIBTOOL_LANG_CXX_CONFIG' => 1,
-+ 'AM_INIT_AUTOMAKE' => 1,
-+ 'AC_DISABLE_STATIC' => 1,
-+ 'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1,
-+ 'AM_MAINTAINER_MODE' => 1,
-+ 'AC_DEFUN_ONCE' => 1,
-+ '_LT_AC_LOCK' => 1,
-+ '_LT_AC_LANG_RC_CONFIG' => 1,
-+ '_LT_AC_LANG_GCJ' => 1,
-+ 'AC_LIBTOOL_RC' => 1,
-+ '_LT_AC_PROG_ECHO_BACKSLASH' => 1,
-+ 'AC_DISABLE_FAST_INSTALL' => 1,
-+ 'AC_LIBTOOL_POSTDEP_PREDEP' => 1,
-+ '_LT_AC_SYS_LIBPATH_AIX' => 1,
-+ '_LT_AC_TRY_DLOPEN_SELF' => 1,
-+ 'include' => 1,
-+ 'LT_AC_PROG_SED' => 1,
-+ 'AM_PROG_AS' => 1,
-+ 'AM_ENABLE_SHARED' => 1,
-+ 'GC_SET_VERSION' => 1,
-+ 'AM_AUX_DIR_EXPAND' => 1,
-+ '_LT_AC_LANG_GCJ_CONFIG' => 1,
-+ 'AC_ENABLE_SHARED' => 1,
-+ 'AC_LIBTOOL_PROG_COMPILER_NO_RTTI' => 1,
-+ '_LT_AC_LANG_F77_CONFIG' => 1,
-+ '_AM_SET_OPTIONS' => 1,
-+ 'AM_RUN_LOG' => 1,
-+ '_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1,
-+ 'AC_LIBTOOL_PICMODE' => 1,
-+ '_LT_REQUIRED_DARWIN_CHECKS' => 1,
-+ 'AC_ENABLE_STATIC' => 1,
-+ 'AC_LIBTOOL_SYS_HARD_LINK_LOCKS' => 1,
-+ 'AC_CHECK_LIBM' => 1,
-+ '_LT_AC_TAGVAR' => 1,
-+ 'AC_LIBTOOL_SYS_LIB_STRIP' => 1,
-+ '_AM_MANGLE_OPTION' => 1,
-+ 'AC_LIBTOOL_LANG_F77_CONFIG' => 1,
-+ 'AM_CONDITIONAL' => 1,
-+ 'AC_LIBTOOL_SYS_MAX_CMD_LEN' => 1,
-+ 'AM_SET_DEPDIR' => 1,
-+ '_LT_CC_BASENAME' => 1,
-+ 'AM_PROG_INSTALL_SH' => 1,
-+ 'm4_include' => 1,
-+ 'AC_PROG_EGREP' => 1,
-+ 'AC_PATH_MAGIC' => 1,
-+ '_AC_AM_CONFIG_HEADER_HOOK' => 1,
-+ 'AM_MAKE_INCLUDE' => 1
-+ }
-+ ], 'Autom4te::Request' ),
-+ bless( [
-+ '1',
-+ 1,
-+ [
-+ '/usr/share/autoconf'
-+ ],
-+ [
-+ '/usr/share/autoconf/autoconf/autoconf.m4f',
-+ 'aclocal.m4',
-+ 'configure.in'
-+ ],
-+ {
-+ '_LT_AC_TAGCONFIG' => 1,
-+ 'AM_PROG_F77_C_O' => 1,
-+ 'm4_pattern_forbid' => 1,
-+ 'AC_INIT' => 1,
-+ 'AC_CANONICAL_TARGET' => 1,
-+ 'AC_SUBST' => 1,
-+ 'AC_CONFIG_LIBOBJ_DIR' => 1,
-+ 'AC_FC_SRCEXT' => 1,
-+ 'AC_CANONICAL_HOST' => 1,
-+ 'AC_PROG_LIBTOOL' => 1,
-+ 'AM_INIT_AUTOMAKE' => 1,
-+ 'AC_CONFIG_SUBDIRS' => 1,
-+ 'AM_AUTOMAKE_VERSION' => 1,
-+ 'LT_CONFIG_LTDL_DIR' => 1,
-+ 'AC_REQUIRE_AUX_FILE' => 1,
-+ 'AC_CONFIG_LINKS' => 1,
-+ 'm4_sinclude' => 1,
-+ 'LT_SUPPORTED_TAG' => 1,
-+ 'AM_MAINTAINER_MODE' => 1,
-+ 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1,
-+ '_m4_warn' => 1,
-+ 'AM_PROG_CXX_C_O' => 1,
-+ 'AM_ENABLE_MULTILIB' => 1,
-+ 'AC_CONFIG_FILES' => 1,
-+ 'LT_INIT' => 1,
-+ 'include' => 1,
-+ 'AM_GNU_GETTEXT' => 1,
-+ 'AC_LIBSOURCE' => 1,
-+ 'AM_PROG_FC_C_O' => 1,
-+ 'AC_CANONICAL_BUILD' => 1,
-+ 'AC_FC_FREEFORM' => 1,
-+ 'AH_OUTPUT' => 1,
-+ '_AM_SUBST_NOTMAKE' => 1,
-+ 'AC_CONFIG_AUX_DIR' => 1,
-+ 'sinclude' => 1,
-+ 'm4_pattern_allow' => 1,
-+ 'AM_PROG_CC_C_O' => 1,
-+ 'AC_CANONICAL_SYSTEM' => 1,
-+ 'AM_CONDITIONAL' => 1,
-+ 'AC_CONFIG_HEADERS' => 1,
-+ 'AC_DEFINE_TRACE_LITERAL' => 1,
-+ 'm4_include' => 1,
-+ 'AC_SUBST_TRACE' => 1
-+ }
-+ ], 'Autom4te::Request' )
-+ );
-+
-diff -urNad mono-2.0.1~/libgc/autom4te.cache/traces.0 mono-2.0.1/libgc/autom4te.cache/traces.0
---- mono-2.0.1~/libgc/autom4te.cache/traces.0 1970-01-01 01:00:00.000000000 +0100
-+++ mono-2.0.1/libgc/autom4te.cache/traces.0 2008-11-11 23:29:24.000000000 +0100
-@@ -0,0 +1,9534 @@
-+m4trace:/usr/share/aclocal/libtool.m4:25: -1- AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-+ AC_PROVIDE_IFELSE([AC_PROG_CXX],
-+ [AC_LIBTOOL_CXX],
-+ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-+ ])])
-+dnl And a similar setup for Fortran 77 support
-+ AC_PROVIDE_IFELSE([AC_PROG_F77],
-+ [AC_LIBTOOL_F77],
-+ [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-+])])
-+
-+dnl Quote AM_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-+dnl If either AC_PROG_GCJ or AM_PROG_GCJ have already been expanded, run
-+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-+ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [ifdef([AC_PROG_GCJ],
-+ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-+ ifdef([A][M_PROG_GCJ],
-+ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-+ ifdef([LT_AC_PROG_GCJ],
-+ [define([LT_AC_PROG_GCJ],
-+ defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-+])])
-+m4trace:/usr/share/aclocal/libtool.m4:60: -1- AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-+
-+# This can be used to rebuild libtool when needed
-+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-+
-+# Always use our own libtool.
-+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+AC_SUBST(LIBTOOL)dnl
-+
-+# Prevent multiple expansion
-+define([AC_PROG_LIBTOOL], [])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:80: -1- AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.50)dnl
-+AC_REQUIRE([AC_ENABLE_SHARED])dnl
-+AC_REQUIRE([AC_ENABLE_STATIC])dnl
-+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-+AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-+AC_REQUIRE([AC_PROG_CC])dnl
-+AC_REQUIRE([AC_PROG_LD])dnl
-+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-+AC_REQUIRE([AC_PROG_NM])dnl
-+
-+AC_REQUIRE([AC_PROG_LN_S])dnl
-+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-+AC_REQUIRE([AC_OBJEXT])dnl
-+AC_REQUIRE([AC_EXEEXT])dnl
-+dnl
-+AC_LIBTOOL_SYS_MAX_CMD_LEN
-+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-+AC_LIBTOOL_OBJDIR
-+
-+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+_LT_AC_PROG_ECHO_BACKSLASH
-+
-+case $host_os in
-+aix3*)
-+ # AIX sometimes has problems with the GCC collect2 program. For some
-+ # reason, if we set the COLLECT_NAMES environment variable, the problems
-+ # vanish in a puff of smoke.
-+ if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+ fi
-+ ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting. It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-+
-+# Same as above, but do not quote variable references.
-+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# Sed substitution to avoid accidental globbing in evaled expressions
-+no_glob_subst='s/\*/\\\*/g'
-+
-+# Constants:
-+rm="rm -f"
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+
-+# All known linkers require a `.a' archive for static linking (except MSVC,
-+# which needs '.lib').
-+libext=a
-+ltmain="$ac_aux_dir/ltmain.sh"
-+ofile="$default_ofile"
-+with_gnu_ld="$lt_cv_prog_gnu_ld"
-+
-+AC_CHECK_TOOL(AR, ar, false)
-+AC_CHECK_TOOL(RANLIB, ranlib, :)
-+AC_CHECK_TOOL(STRIP, strip, :)
-+
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+
-+# Set sane defaults for various variables
-+test -z "$AR" && AR=ar
-+test -z "$AR_FLAGS" && AR_FLAGS=cru
-+test -z "$AS" && AS=as
-+test -z "$CC" && CC=cc
-+test -z "$LTCC" && LTCC=$CC
-+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$LD" && LD=ld
-+test -z "$LN_S" && LN_S="ln -s"
-+test -z "$MAGIC_CMD" && MAGIC_CMD=file
-+test -z "$NM" && NM=nm
-+test -z "$SED" && SED=sed
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$RANLIB" && RANLIB=:
-+test -z "$STRIP" && STRIP=:
-+test -z "$ac_objext" && ac_objext=o
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+if test -n "$RANLIB"; then
-+ case $host_os in
-+ openbsd*)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-+ ;;
-+ *)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-+ ;;
-+ esac
-+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+fi
-+
-+_LT_CC_BASENAME([$compiler])
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+ AC_PATH_MAGIC
-+ fi
-+ ;;
-+esac
-+
-+_LT_REQUIRED_DARWIN_CHECKS
-+
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-+enable_win32_dll=yes, enable_win32_dll=no)
-+
-+AC_ARG_ENABLE([libtool-lock],
-+ [AC_HELP_STRING([--disable-libtool-lock],
-+ [avoid locking (might break parallel builds)])])
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+AC_ARG_WITH([pic],
-+ [AC_HELP_STRING([--with-pic],
-+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-+ [pic_mode="$withval"],
-+ [pic_mode=default])
-+test -z "$pic_mode" && pic_mode=default
-+
-+# Use C for the default configuration in the libtool script
-+tagname=
-+AC_LIBTOOL_LANG_C_CONFIG
-+_LT_AC_TAGCONFIG
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:226: -1- AC_DEFUN([_LT_AC_SYS_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:243: -1- AC_DEFUN([_LT_CC_BASENAME], [for cc_temp in $1""; do
-+ case $cc_temp in
-+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:260: -1- AC_DEFUN([_LT_COMPILER_BOILERPLATE], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:274: -1- AC_DEFUN([_LT_LINKER_BOILERPLATE], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm -r conftest*
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:286: -1- AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS], [
-+ case $host_os in
-+ rhapsody* | darwin*)
-+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-+
-+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-+ [lt_cv_apple_cc_single_mod=no
-+ if test -z "${LT_MULTI_MODULE}"; then
-+ # By default we will add the -single_module flag. You can override
-+ # by either setting the environment variable LT_MULTI_MODULE
-+ # non-empty at configure time, or by adding -multi_module to the
-+ # link flags.
-+ echo "int foo(void){return 1;}" > conftest.c
-+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-+ -dynamiclib ${wl}-single_module conftest.c
-+ if test -f libconftest.dylib; then
-+ lt_cv_apple_cc_single_mod=yes
-+ rm -rf libconftest.dylib*
-+ fi
-+ rm conftest.c
-+ fi])
-+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-+ [lt_cv_ld_exported_symbols_list],
-+ [lt_cv_ld_exported_symbols_list=no
-+ save_LDFLAGS=$LDFLAGS
-+ echo "_main" > conftest.sym
-+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-+ [lt_cv_ld_exported_symbols_list=yes],
-+ [lt_cv_ld_exported_symbols_list=no])
-+ LDFLAGS="$save_LDFLAGS"
-+ ])
-+ case $host_os in
-+ rhapsody* | darwin1.[[0123]])
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-+ darwin1.*)
-+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-+ darwin*)
-+ # if running on 10.5 or later, the deployment target defaults
-+ # to the OS version, if on x86, and 10.4, the deployment
-+ # target defaults to 10.4. Don't you love it?
-+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-+ 10.[[012]]*)
-+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-+ 10.*)
-+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-+ esac
-+ ;;
-+ esac
-+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-+ _lt_dar_single_mod='$single_module'
-+ fi
-+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-+ else
-+ _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
-+ fi
-+ if test "$DSYMUTIL" != ":"; then
-+ _lt_dsymutil="~$DSYMUTIL \$lib || :"
-+ else
-+ _lt_dsymutil=
-+ fi
-+ ;;
-+ esac
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:363: -1- AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-+lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\(.*\)$/\1/
-+ p
-+ }
-+ }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi],[])
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:384: -1- AC_DEFUN([_LT_AC_SHELL_INIT], [ifdef([AC_DIVERSION_NOTICE],
-+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-+ [AC_DIVERT_PUSH(NOTICE)])
-+$1
-+AC_DIVERT_POP
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:397: -1- AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], [_LT_AC_SHELL_INIT([
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+ # Remove one level of quotation (which was required for Make).
-+ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-+ ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X[$]1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+elif test "X[$]1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+ # Yippee, $echo works!
-+ :
-+else
-+ # Restart under the correct shell.
-+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-+fi
-+
-+if test "X[$]1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+[$]*
-+EOF
-+ exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-+ echo_test_string=`eval $cmd` &&
-+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+ then
-+ break
-+ fi
-+ done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ :
-+else
-+ # The Solaris, AIX, and Digital Unix default echo programs unquote
-+ # backslashes. This makes it impossible to quote backslashes using
-+ # echo "$something" | sed 's/\\/\\\\/g'
-+ #
-+ # So, first we look for a working echo in the user's PATH.
-+
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for dir in $PATH /usr/ucb; do
-+ IFS="$lt_save_ifs"
-+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$dir/echo"
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ if test "X$echo" = Xecho; then
-+ # We didn't find a better echo, so look for alternatives.
-+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # This shell has a builtin print -r that does the trick.
-+ echo='print -r'
-+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+ test "X$CONFIG_SHELL" != X/bin/ksh; then
-+ # If we have ksh, try running configure again with it.
-+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+ export ORIGINAL_CONFIG_SHELL
-+ CONFIG_SHELL=/bin/ksh
-+ export CONFIG_SHELL
-+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-+ else
-+ # Try using printf.
-+ echo='printf %s\n'
-+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # Cool, printf works
-+ :
-+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+ export CONFIG_SHELL
-+ SHELL="$CONFIG_SHELL"
-+ export SHELL
-+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
-+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
-+ else
-+ # maybe with a smaller string...
-+ prev=:
-+
-+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+ then
-+ break
-+ fi
-+ prev="$cmd"
-+ done
-+
-+ if test "$prev" != 'sed 50q "[$]0"'; then
-+ echo_test_string=`eval $prev`
-+ export echo_test_string
-+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-+ else
-+ # Oops. We lost completely, so just stick with echo.
-+ echo=echo
-+ fi
-+ fi
-+ fi
-+ fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-+ ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-+fi
-+
-+AC_SUBST(ECHO)
-+])])
-+m4trace:/usr/share/aclocal/libtool.m4:551: -1- AC_DEFUN([_LT_AC_LOCK], [AC_ARG_ENABLE([libtool-lock],
-+ [AC_HELP_STRING([--disable-libtool-lock],
-+ [avoid locking (might break parallel builds)])])
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+# Some flags need to be propagated to the compiler or linker for good
-+# libtool support.
-+case $host in
-+ia64-*-hpux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *ELF-32*)
-+ HPUX_IA64_MODE="32"
-+ ;;
-+ *ELF-64*)
-+ HPUX_IA64_MODE="64"
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+*-*-irix6*)
-+ # Find out which ABI we are using.
-+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -melf32bsmip"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -melf32bmipn32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -melf64bmip"
-+ ;;
-+ esac
-+ else
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -32"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -n32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -64"
-+ ;;
-+ esac
-+ fi
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-+s390*-*linux*|sparc*-*linux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ case `/usr/bin/file conftest.o` in
-+ *32-bit*)
-+ case $host in
-+ x86_64-*kfreebsd*-gnu)
-+ LD="${LD-ld} -m elf_i386_fbsd"
-+ ;;
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_i386"
-+ ;;
-+ ppc64-*linux*|powerpc64-*linux*)
-+ LD="${LD-ld} -m elf32ppclinux"
-+ ;;
-+ s390x-*linux*)
-+ LD="${LD-ld} -m elf_s390"
-+ ;;
-+ sparc64-*linux*)
-+ LD="${LD-ld} -m elf32_sparc"
-+ ;;
-+ esac
-+ ;;
-+ *64-bit*)
-+ case $host in
-+ x86_64-*kfreebsd*-gnu)
-+ LD="${LD-ld} -m elf_x86_64_fbsd"
-+ ;;
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_x86_64"
-+ ;;
-+ ppc*-*linux*|powerpc*-*linux*)
-+ LD="${LD-ld} -m elf64ppc"
-+ ;;
-+ s390*-*linux*)
-+ LD="${LD-ld} -m elf64_s390"
-+ ;;
-+ sparc*-*linux*)
-+ LD="${LD-ld} -m elf64_sparc"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+*-*-sco3.2v5*)
-+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-+ SAVE_CFLAGS="$CFLAGS"
-+ CFLAGS="$CFLAGS -belf"
-+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-+ [AC_LANG_PUSH(C)
-+ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-+ AC_LANG_POP])
-+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-+ CFLAGS="$SAVE_CFLAGS"
-+ fi
-+ ;;
-+sparc*-*solaris*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ case `/usr/bin/file conftest.o` in
-+ *64-bit*)
-+ case $lt_cv_prog_gnu_ld in
-+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
-+ *)
-+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-+ LD="${LD-ld} -64"
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-+ AC_CHECK_TOOL(AS, as, false)
-+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
-+ ;;
-+ ])
-+esac
-+
-+need_locks="$enable_libtool_lock"
-+
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:708: -1- AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED])
-+AC_CACHE_CHECK([$1], [$2],
-+ [$2=no
-+ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$3"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&AS_MESSAGE_LOG_FD
-+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ $2=yes
-+ fi
-+ fi
-+ $rm conftest*
-+])
-+
-+if test x"[$]$2" = xyes; then
-+ ifelse([$5], , :, [$5])
-+else
-+ ifelse([$6], , :, [$6])
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:753: -1- AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_CACHE_CHECK([$1], [$2],
-+ [$2=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $3"
-+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ $2=yes
-+ fi
-+ else
-+ $2=yes
-+ fi
-+ fi
-+ $rm -r conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+])
-+
-+if test x"[$]$2" = xyes; then
-+ ifelse([$4], , :, [$4])
-+else
-+ ifelse([$5], , :, [$5])
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:789: -1- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [# find the maximum length of command line arguments
-+AC_MSG_CHECKING([the maximum length of command line arguments])
-+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-+ i=0
-+ teststring="ABCD"
-+
-+ case $build_os in
-+ msdosdjgpp*)
-+ # On DJGPP, this test can blow up pretty badly due to problems in libc
-+ # (any single argument exceeding 2000 bytes causes a buffer overrun
-+ # during glob expansion). Even if it were fixed, the result of this
-+ # check would be larger than it should be.
-+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
-+ ;;
-+
-+ gnu*)
-+ # Under GNU Hurd, this test is not required because there is
-+ # no limit to the length of command line arguments.
-+ # Libtool will interpret -1 as no limit whatsoever
-+ lt_cv_sys_max_cmd_len=-1;
-+ ;;
-+
-+ cygwin* | mingw*)
-+ # On Win9x/ME, this test blows up -- it succeeds, but takes
-+ # about 5 minutes as the teststring grows exponentially.
-+ # Worse, since 9x/ME are not pre-emptively multitasking,
-+ # you end up with a "frozen" computer, even though with patience
-+ # the test eventually succeeds (with a max line length of 256k).
-+ # Instead, let's just punt: use the minimum linelength reported by
-+ # all of the supported platforms: 8192 (on NT/2K/XP).
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ amigaos*)
-+ # On AmigaOS with pdksh, this test takes hours, literally.
-+ # So we just punt and use a minimum line length of 8192.
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-+ # This has been around since 386BSD, at least. Likely further.
-+ if test -x /sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-+ elif test -x /usr/sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-+ else
-+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
-+ fi
-+ # And add a safety zone
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+ ;;
-+
-+ interix*)
-+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
-+ lt_cv_sys_max_cmd_len=196608
-+ ;;
-+
-+ osf*)
-+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-+ # nice to cause kernel panics so lets avoid the loop below.
-+ # First set a reasonable default.
-+ lt_cv_sys_max_cmd_len=16384
-+ #
-+ if test -x /sbin/sysconfig; then
-+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
-+ esac
-+ fi
-+ ;;
-+ sco3.2v5*)
-+ lt_cv_sys_max_cmd_len=102400
-+ ;;
-+ sysv5* | sco5v6* | sysv4.2uw2*)
-+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-+ if test -n "$kargmax"; then
-+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
-+ else
-+ lt_cv_sys_max_cmd_len=32768
-+ fi
-+ ;;
-+ *)
-+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-+ if test -n "$lt_cv_sys_max_cmd_len"; then
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+ else
-+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-+ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-+ = "XX$teststring") >/dev/null 2>&1 &&
-+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
-+ lt_cv_sys_max_cmd_len=$new_result &&
-+ test $i != 17 # 1/2 MB should be enough
-+ do
-+ i=`expr $i + 1`
-+ teststring=$teststring$teststring
-+ done
-+ teststring=
-+ # Add a significant safety factor because C++ compilers can tack on massive
-+ # amounts of additional arguments before passing them to the linker.
-+ # It appears as though 1/2 is a usable value.
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+ fi
-+ ;;
-+ esac
-+])
-+if test -n $lt_cv_sys_max_cmd_len ; then
-+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-+else
-+ AC_MSG_RESULT(none)
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:907: -1- AC_DEFUN([_LT_AC_CHECK_DLFCN], [AC_CHECK_HEADERS(dlfcn.h)dnl
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:915: -1- AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-+if test "$cross_compiling" = yes; then :
-+ [$4]
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+[#line __oline__ "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+ else
-+ puts (dlerror ());
-+
-+ exit (status);
-+}]
-+EOF
-+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) $1 ;;
-+ x$lt_dlneed_uscore) $2 ;;
-+ x$lt_dlunknown|x*) $3 ;;
-+ esac
-+ else :
-+ # compilation failed
-+ $3
-+ fi
-+fi
-+rm -fr conftest*
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:1005: -1- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-+if test "x$enable_dlopen" != xyes; then
-+ enable_dlopen=unknown
-+ enable_dlopen_self=unknown
-+ enable_dlopen_self_static=unknown
-+else
-+ lt_cv_dlopen=no
-+ lt_cv_dlopen_libs=
-+
-+ case $host_os in
-+ beos*)
-+ lt_cv_dlopen="load_add_on"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ;;
-+
-+ mingw* | pw32*)
-+ lt_cv_dlopen="LoadLibrary"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ cygwin*)
-+ lt_cv_dlopen="dlopen"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ darwin*)
-+ # if libdl is installed we need to link against it
-+ AC_CHECK_LIB([dl], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-+ lt_cv_dlopen="dyld"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ])
-+ ;;
-+
-+ *)
-+ AC_CHECK_FUNC([shl_load],
-+ [lt_cv_dlopen="shl_load"],
-+ [AC_CHECK_LIB([dld], [shl_load],
-+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-+ [AC_CHECK_FUNC([dlopen],
-+ [lt_cv_dlopen="dlopen"],
-+ [AC_CHECK_LIB([dl], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-+ [AC_CHECK_LIB([svld], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-+ [AC_CHECK_LIB([dld], [dld_link],
-+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-+ ])
-+ ])
-+ ])
-+ ])
-+ ])
-+ ;;
-+ esac
-+
-+ if test "x$lt_cv_dlopen" != xno; then
-+ enable_dlopen=yes
-+ else
-+ enable_dlopen=no
-+ fi
-+
-+ case $lt_cv_dlopen in
-+ dlopen)
-+ save_CPPFLAGS="$CPPFLAGS"
-+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+
-+ save_LDFLAGS="$LDFLAGS"
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+
-+ save_LIBS="$LIBS"
-+ LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+ AC_CACHE_CHECK([whether a program can dlopen itself],
-+ lt_cv_dlopen_self, [dnl
-+ _LT_AC_TRY_DLOPEN_SELF(
-+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-+ ])
-+
-+ if test "x$lt_cv_dlopen_self" = xyes; then
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-+ lt_cv_dlopen_self_static, [dnl
-+ _LT_AC_TRY_DLOPEN_SELF(
-+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-+ ])
-+ fi
-+
-+ CPPFLAGS="$save_CPPFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+ LIBS="$save_LIBS"
-+ ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self in
-+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+ *) enable_dlopen_self=unknown ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self_static in
-+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+ *) enable_dlopen_self_static=unknown ;;
-+ esac
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:1119: -1- AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
-+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:1171: -1- AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_REQUIRE([_LT_AC_LOCK])dnl
-+
-+hard_links="nottested"
-+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ AC_MSG_CHECKING([if we can lock with hard links])
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ AC_MSG_RESULT([$hard_links])
-+ if test "$hard_links" = no; then
-+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:1197: -1- AC_DEFUN([AC_LIBTOOL_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-+[rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+ lt_cv_objdir=.libs
-+else
-+ # MS-DOS does not allow filenames that begin with a dot.
-+ lt_cv_objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null])
-+objdir=$lt_cv_objdir
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:1215: -1- AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs])
-+_LT_AC_TAGVAR(hardcode_action, $1)=
-+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-+ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-+ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-+ test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-+fi
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-+
-+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:1255: -1- AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], [striplib=
-+old_striplib=
-+AC_MSG_CHECKING([whether stripping libraries is possible])
-+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-+ AC_MSG_RESULT([yes])
-+else
-+# FIXME - insert some real tests, host_os isn't really good enough
-+ case $host_os in
-+ darwin*)
-+ if test -n "$STRIP" ; then
-+ striplib="$STRIP -x"
-+ old_striplib="$STRIP -S"
-+ AC_MSG_RESULT([yes])
-+ else
-+ AC_MSG_RESULT([no])
-+fi
-+ ;;
-+ *)
-+ AC_MSG_RESULT([no])
-+ ;;
-+ esac
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:1286: -1- AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_MSG_CHECKING([dynamic linker characteristics])
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+m4_if($1,[],[
-+if test "$GCC" = yes; then
-+ case $host_os in
-+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-+ *) lt_awk_arg="/^libraries:/" ;;
-+ esac
-+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # Ok, now we have the path, separated by spaces, we can step through it
-+ # and add multilib dir if necessary.
-+ lt_tmp_lt_search_path_spec=
-+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-+ for lt_sys_path in $lt_search_path_spec; do
-+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-+ else
-+ test -d "$lt_sys_path" && \
-+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-+ fi
-+ done
-+ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-+BEGIN {RS=" "; FS="/|\n";} {
-+ lt_foo="";
-+ lt_count=0;
-+ for (lt_i = NF; lt_i > 0; lt_i--) {
-+ if ($lt_i != "" && $lt_i != ".") {
-+ if ($lt_i == "..") {
-+ lt_count++;
-+ } else {
-+ if (lt_count == 0) {
-+ lt_foo="/" $lt_i lt_foo;
-+ } else {
-+ lt_count--;
-+ }
-+ }
-+ }
-+ }
-+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-+}'`
-+ sys_lib_search_path_spec=`echo $lt_search_path_spec`
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi])
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix[[4-9]]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[[01]] | aix4.[[01]].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[[45]]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+ m4_if([$1], [],[
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[[123]]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 4.6 on, and DragonFly
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix[[3-9]]*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[[89]] | openbsd2.[[89]].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+rdos*)
-+ dynamic_linker=no
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+AC_MSG_RESULT([$dynamic_linker])
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
-+[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
-+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-+AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
-+[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
-+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:1920: -1- AC_DEFUN([_LT_AC_TAGCONFIG], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_ARG_WITH([tags],
-+ [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-+ [include additional configurations @<:@automatic@:>@])],
-+ [tagnames="$withval"])
-+
-+if test -f "$ltmain" && test -n "$tagnames"; then
-+ if test ! -f "${ofile}"; then
-+ AC_MSG_WARN([output file `$ofile' does not exist])
-+ fi
-+
-+ if test -z "$LTCC"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-+ if test -z "$LTCC"; then
-+ AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-+ else
-+ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-+ fi
-+ fi
-+ if test -z "$LTCFLAGS"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-+ fi
-+
-+ # Extract list of available tagged configurations in $ofile.
-+ # Note that this assumes the entire list is on one line.
-+ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-+
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for tagname in $tagnames; do
-+ IFS="$lt_save_ifs"
-+ # Check whether tagname contains only valid characters
-+ case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-+ "") ;;
-+ *) AC_MSG_ERROR([invalid tag name: $tagname])
-+ ;;
-+ esac
-+
-+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-+ then
-+ AC_MSG_ERROR([tag name \"$tagname\" already exists])
-+ fi
-+
-+ # Update the list of available tags.
-+ if test -n "$tagname"; then
-+ echo appending configuration tag \"$tagname\" to $ofile
-+
-+ case $tagname in
-+ CXX)
-+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ AC_LIBTOOL_LANG_CXX_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ F77)
-+ if test -n "$F77" && test "X$F77" != "Xno"; then
-+ AC_LIBTOOL_LANG_F77_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ GCJ)
-+ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-+ AC_LIBTOOL_LANG_GCJ_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ RC)
-+ AC_LIBTOOL_LANG_RC_CONFIG
-+ ;;
-+
-+ *)
-+ AC_MSG_ERROR([Unsupported tag name: $tagname])
-+ ;;
-+ esac
-+
-+ # Append the new tag name to the list of available tags.
-+ if test -n "$tagname" ; then
-+ available_tags="$available_tags $tagname"
-+ fi
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ # Now substitute the updated list of available tags.
-+ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-+ mv "${ofile}T" "$ofile"
-+ chmod +x "$ofile"
-+ else
-+ rm -f "${ofile}T"
-+ AC_MSG_ERROR([unable to update list of available tagged configurations.])
-+ fi
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2026: -1- AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2034: -1- AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2043: -1- AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([shared],
-+ [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-+ [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_shared=yes ;;
-+ no) enable_shared=no ;;
-+ *)
-+ enable_shared=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_shared=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2072: -1- AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_SHARED(no)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2082: -1- AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([static],
-+ [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-+ [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_static=yes ;;
-+ no) enable_static=no ;;
-+ *)
-+ enable_static=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_static=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2111: -1- AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_STATIC(no)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2121: -1- AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([fast-install],
-+ [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-+ [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_fast_install=yes ;;
-+ no) enable_fast_install=no ;;
-+ *)
-+ enable_fast_install=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_fast_install=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2150: -1- AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_FAST_INSTALL(no)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2160: -1- AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+pic_mode=ifelse($#,1,$1,default)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2184: -1- AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_REQUIRE([AC_PROG_EGREP])dnl
-+AC_MSG_CHECKING([for $1])
-+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-+[case $MAGIC_CMD in
-+[[\\/*] | ?:[\\/]*])
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+dnl $ac_dummy forces splitting on constant user-supplied paths.
-+dnl POSIX.2 word splitting is done only on the output of word expansions,
-+dnl not every word. This closes a longstanding sh security hole.
-+ ac_dummy="ifelse([$2], , $PATH, [$2])"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/$1; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool at gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac])
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ AC_MSG_RESULT($MAGIC_CMD)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2247: -1- AC_DEFUN([AC_PATH_MAGIC], [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-+if test -z "$lt_cv_path_MAGIC_CMD"; then
-+ if test -n "$ac_tool_prefix"; then
-+ AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-+ else
-+ MAGIC_CMD=:
-+ fi
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2262: -1- AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH([gnu-ld],
-+ [AC_HELP_STRING([--with-gnu-ld],
-+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-+ [test "$withval" = no || with_gnu_ld=yes],
-+ [with_gnu_ld=no])
-+AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_REQUIRE([AC_PROG_CC])dnl
-+AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ AC_MSG_CHECKING([for ld used by $CC])
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [[\\/]]* | ?:[[\\/]]*)
-+ re_direlt='/[[^/]][[^/]]*/\.\./'
-+ # Canonicalize the pathname of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ AC_MSG_CHECKING([for GNU ld])
-+else
-+ AC_MSG_CHECKING([for non-GNU ld])
-+fi
-+AC_CACHE_VAL(lt_cv_path_LD,
-+[if test -z "$LD"; then
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some variants of GNU ld only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break
-+ ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+else
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi])
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+ AC_MSG_RESULT($LD)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-+AC_PROG_LD_GNU
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2346: -1- AC_DEFUN([AC_PROG_LD_GNU], [AC_REQUIRE([AC_PROG_EGREP])dnl
-+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac])
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2366: -1- AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], [AC_CACHE_CHECK([for $LD option to reload object files],
-+ lt_cv_ld_reload_flag,
-+ [lt_cv_ld_reload_flag='-r'])
-+reload_flag=$lt_cv_ld_reload_flag
-+case $reload_flag in
-+"" | " "*) ;;
-+*) reload_flag=" $reload_flag" ;;
-+esac
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+case $host_os in
-+ darwin*)
-+ if test "$GCC" = yes; then
-+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-+ else
-+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+ fi
-+ ;;
-+esac
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2392: -1- AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], [AC_CACHE_CHECK([how to recognize dependent libraries],
-+lt_cv_deplibs_check_method,
-+[lt_cv_file_magic_cmd='$MAGIC_CMD'
-+lt_cv_file_magic_test_file=
-+lt_cv_deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [[regex]]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given extended regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+
-+case $host_os in
-+aix[[4-9]]*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+beos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+bsdi[[45]]*)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-+ lt_cv_file_magic_cmd='/usr/bin/file -L'
-+ lt_cv_file_magic_test_file=/shlib/libc.so
-+ ;;
-+
-+cygwin*)
-+ # func_win32_libid is a shell function defined in ltmain.sh
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='func_win32_libid'
-+ ;;
-+
-+mingw* | pw32*)
-+ # Base MSYS/MinGW do not provide the 'file' command needed by
-+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
-+ # unless we find 'file', for example because we are cross-compiling.
-+ if ( file / ) >/dev/null 2>&1; then
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='func_win32_libid'
-+ else
-+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ lt_cv_file_magic_cmd='$OBJDUMP -f'
-+ fi
-+ ;;
-+
-+darwin* | rhapsody*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ case $host_cpu in
-+ i*86 )
-+ # Not sure whether the presence of OpenBSD here was a mistake.
-+ # Let's accept both of them until this is cleared up.
-+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ ;;
-+ esac
-+ else
-+ lt_cv_deplibs_check_method=pass_all
-+ fi
-+ ;;
-+
-+gnu*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+hpux10.20* | hpux11*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ case $host_cpu in
-+ ia64*)
-+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-+ ;;
-+ hppa*64*)
-+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-+ ;;
-+ *)
-+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
-+ ;;
-+ esac
-+ ;;
-+
-+interix[[3-9]]*)
-+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $LD in
-+ *-32|*"-32 ") libmagic=32-bit;;
-+ *-n32|*"-n32 ") libmagic=N32;;
-+ *-64|*"-64 ") libmagic=64-bit;;
-+ *) libmagic=never-match;;
-+ esac
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-+ fi
-+ ;;
-+
-+newos6*)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
-+ ;;
-+
-+nto-qnx*)
-+ lt_cv_deplibs_check_method=unknown
-+ ;;
-+
-+openbsd*)
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-+ fi
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+rdos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+solaris*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ case $host_vendor in
-+ motorola)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-+ ;;
-+ ncr)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ sequent)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-+ ;;
-+ sni)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-+ lt_cv_file_magic_test_file=/lib/libc.so
-+ ;;
-+ siemens)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ pc)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ esac
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+esac
-+])
-+file_magic_cmd=$lt_cv_file_magic_cmd
-+deplibs_check_method=$lt_cv_deplibs_check_method
-+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2584: -1- AC_DEFUN([AC_PROG_NM], [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-+[if test -n "$NM"; then
-+ # Let the user override the test.
-+ lt_cv_path_NM="$NM"
-+else
-+ lt_nm_to_check="${ac_tool_prefix}nm"
-+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-+ lt_nm_to_check="$lt_nm_to_check nm"
-+ fi
-+ for lt_tmp_nm in $lt_nm_to_check; do
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ tmp_nm="$ac_dir/$lt_tmp_nm"
-+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-+ # Check to see if the nm accepts a BSD-compat flag.
-+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+ # nm: unknown option "B" ignored
-+ # Tru64's nm complains that /dev/null is an invalid object file
-+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-+ */dev/null* | *'Invalid file or object type'*)
-+ lt_cv_path_NM="$tmp_nm -B"
-+ break
-+ ;;
-+ *)
-+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-+ */dev/null*)
-+ lt_cv_path_NM="$tmp_nm -p"
-+ break
-+ ;;
-+ *)
-+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-+ continue # so that we can try to find one that supports BSD flags
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ done
-+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-+fi])
-+NM="$lt_cv_path_NM"
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2636: -1- AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+LIBM=
-+case $host in
-+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-+ # These system don't have libm, or don't need it
-+ ;;
-+*-ncr-sysv4.3*)
-+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-+ ;;
-+*)
-+ AC_CHECK_LIB(m, cos, LIBM="-lm")
-+ ;;
-+esac
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2665: -1- AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+ case $enable_ltdl_convenience in
-+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-+ "") enable_ltdl_convenience=yes
-+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-+ esac
-+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ # For backwards non-gettext consistent compatibility...
-+ INCLTDL="$LTDLINCL"
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2691: -1- AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+ AC_CHECK_LIB(ltdl, lt_dlinit,
-+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-+ [if test x"$enable_ltdl_install" = xno; then
-+ AC_MSG_WARN([libltdl not installed, but installation disabled])
-+ else
-+ enable_ltdl_install=yes
-+ fi
-+ ])
-+ if test x"$enable_ltdl_install" = x"yes"; then
-+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
-+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ else
-+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-+ LIBLTDL="-lltdl"
-+ LTDLINCL=
-+ fi
-+ # For backwards non-gettext consistent compatibility...
-+ INCLTDL="$LTDLINCL"
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2718: -1- AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_LT_AC_LANG_CXX])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2725: -1- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX])
-+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2733: -1- AC_DEFUN([_LT_AC_PROG_CXXCPP], [
-+AC_REQUIRE([AC_PROG_CXX])
-+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ AC_PROG_CXXCPP
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2746: -1- AC_DEFUN([AC_LIBTOOL_F77], [AC_REQUIRE([_LT_AC_LANG_F77])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2753: -1- AC_DEFUN([_LT_AC_LANG_F77], [AC_REQUIRE([AC_PROG_F77])
-+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2762: -1- AC_DEFUN([AC_LIBTOOL_GCJ], [AC_REQUIRE([_LT_AC_LANG_GCJ])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2769: -1- AC_DEFUN([_LT_AC_LANG_GCJ], [AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-+ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-+ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-+ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2783: -1- AC_DEFUN([AC_LIBTOOL_RC], [AC_REQUIRE([LT_AC_PROG_RC])
-+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2794: -1- AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-+m4trace:/usr/share/aclocal/libtool.m4:2795: -1- AC_DEFUN([_LT_AC_LANG_C_CONFIG], [lt_save_CC="$CC"
-+AC_LANG_PUSH(C)
-+
-+# Source file extension for C test sources.
-+ac_ext=c
-+
-+# Object file extension for compiled C test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(){return(0);}'
-+
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+AC_LIBTOOL_SYS_LIB_STRIP
-+AC_LIBTOOL_DLOPEN_SELF
-+
-+# Report which library types will actually be built
-+AC_MSG_CHECKING([if libtool supports shared libraries])
-+AC_MSG_RESULT([$can_build_shared])
-+
-+AC_MSG_CHECKING([whether to build shared libraries])
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+
-+aix[[4-9]]*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+AC_MSG_RESULT([$enable_shared])
-+
-+AC_MSG_CHECKING([whether to build static libraries])
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+AC_MSG_RESULT([$enable_static])
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC="$lt_save_CC"
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:2875: -1- AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-+m4trace:/usr/share/aclocal/libtool.m4:2876: -1- AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++)
-+AC_REQUIRE([AC_PROG_CXX])
-+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-+
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+_LT_AC_TAGVAR(always_export_symbols, $1)=no
-+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_direct, $1)=no
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+_LT_AC_TAGVAR(module_cmds, $1)=
-+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-+_LT_AC_TAGVAR(no_undefined_flag, $1)=
-+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+
-+# Dependencies to place before and after the object being linked:
-+_LT_AC_TAGVAR(predep_objects, $1)=
-+_LT_AC_TAGVAR(postdep_objects, $1)=
-+_LT_AC_TAGVAR(predeps, $1)=
-+_LT_AC_TAGVAR(postdeps, $1)=
-+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-+
-+# Source file extension for C++ test sources.
-+ac_ext=cpp
-+
-+# Object file extension for compiled C++ test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC=$CC
-+lt_save_LD=$LD
-+lt_save_GCC=$GCC
-+GCC=$GXX
-+lt_save_with_gnu_ld=$with_gnu_ld
-+lt_save_path_LD=$lt_cv_path_LD
-+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-+else
-+ $as_unset lt_cv_prog_gnu_ld
-+fi
-+if test -n "${lt_cv_path_LDCXX+set}"; then
-+ lt_cv_path_LD=$lt_cv_path_LDCXX
-+else
-+ $as_unset lt_cv_path_LD
-+fi
-+test -z "${LDCXX+set}" || LD=$LDCXX
-+CC=${CXX-"c++"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_CC_BASENAME([$compiler])
-+
-+# We don't want -fno-exception wen compiling C++ code, so set the
-+# no_builtin_flag separately
-+if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-+else
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-+fi
-+
-+if test "$GXX" = yes; then
-+ # Set up default GNU C++ configuration
-+
-+ AC_PROG_LD
-+
-+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
-+ # archiving commands below assume that GNU ld is being used.
-+ if test "$with_gnu_ld" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-+ # investigate it a little bit more. (MM)
-+ wlarc='${wl}'
-+
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-+ grep 'no-whole-archive' > /dev/null; then
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ fi
-+ else
-+ with_gnu_ld=no
-+ wlarc=
-+
-+ # A generic and very simple default shared library creation
-+ # command for GNU C++ for the case where it uses the native
-+ # linker, instead of GNU ld. If possible, this setting should
-+ # overridden to take advantage of the native linker features on
-+ # the platform it is being used on.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ fi
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+else
-+ GXX=no
-+ with_gnu_ld=no
-+ wlarc=
-+fi
-+
-+# PORTME: fill in a description of your system's C++ link characteristics
-+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+case $host_os in
-+ aix3*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aix[[4-9]]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-+ for ld_flag in $LDFLAGS; do
-+ case $ld_flag in
-+ *-brtl*)
-+ aix_use_runtimelinking=yes
-+ break
-+ ;;
-+ esac
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ _LT_AC_TAGVAR(archive_cmds, $1)=''
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ if test "$GXX" = yes; then
-+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ chorus*)
-+ case $cc_basename in
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ darwin* | rhapsody*)
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-+ if test "$GXX" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-+ fi
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ freebsd[[12]]*)
-+ # C++ shared libraries reported to be fairly broken before switch to ELF
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ freebsd-elf*)
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ ;;
-+ freebsd* | dragonfly*)
-+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-+ # conventions
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ ;;
-+ gnu*)
-+ ;;
-+ hpux9*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aCC*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ hpux10*|hpux11*)
-+ if test $with_gnu_ld = no; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*) ;;
-+ *)
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ ;;
-+ esac
-+ fi
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+ ;;
-+ esac
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aCC*)
-+ case $host_cpu in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test $with_gnu_ld = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ interix[[3-9]]*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+ irix5* | irix6*)
-+ case $cc_basename in
-+ CC*)
-+ # SGI C++
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-+ fi
-+ fi
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-+ ;;
-+ icpc*)
-+ # Intel C++
-+ with_gnu_ld=yes
-+ # version 8.0 and above of icpc choke on multiply defined symbols
-+ # if we add $predep_objects and $postdep_objects, however 7.1 and
-+ # earlier do not add the objects themselves.
-+ case `$CC -V 2>&1` in
-+ *"Version 7."*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ *) # Version 8.0 or newer
-+ tmp_idyn=
-+ case $host_cpu in
-+ ia64*) tmp_idyn=' -i_dynamic';;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-+ ;;
-+ pgCC* | pgcpp*)
-+ # Portland Group C++ compiler
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-+
-+ runpath_var=LD_RUN_PATH
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+
-+ # Not sure whether something based on
-+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-+ # would be better.
-+ output_verbose_link_cmd='echo'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ m88k*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-+ wlarc=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ fi
-+ # Workaround some broken pre-1.5 toolchains
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-+ ;;
-+ openbsd2*)
-+ # C++ shared libraries are fairly broken
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ fi
-+ output_verbose_link_cmd='echo'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ osf3*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-+
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ cxx*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Archives containing C++ object files must be created using
-+ # the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ cxx*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-+ echo "-hidden">> $lib.exp~
-+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-+ $rm $lib.exp'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ lcc*)
-+ # Lucid
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ case $host_os in
-+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ output_verbose_link_cmd='echo'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+
-+ # The C++ compiler must be used to create the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ # GNU C++ compiler with Solaris linker
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-+ if $CC --version | grep -v '^2\.7' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ else
-+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
-+ # platform.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ fi
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-+ case $host_os in
-+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-+ *)
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ # For security reasons, it is highly recommended that you always
-+ # use absolute paths for naming shared libraries, and exclude the
-+ # DT_RUNPATH tag from executables and libraries. But doing so
-+ # requires that you compile everything twice, which is a pain.
-+ # So that behaviour is only enabled if SCOABSPATH is set to a
-+ # non-empty value in the environment. Most likely only useful for
-+ # creating official distributions of packages.
-+ # This is a hack until libtool officially supports absolute path
-+ # names for shared libraries.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+esac
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-+
-+_LT_AC_TAGVAR(GCC, $1)="$GXX"
-+_LT_AC_TAGVAR(LD, $1)="$LD"
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+AC_LIBTOOL_POSTDEP_PREDEP($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC=$lt_save_CC
-+LDCXX=$LD
-+LD=$lt_save_LD
-+GCC=$lt_save_GCC
-+with_gnu_ldcxx=$with_gnu_ld
-+with_gnu_ld=$lt_save_with_gnu_ld
-+lt_cv_path_LDCXX=$lt_cv_path_LD
-+lt_cv_path_LD=$lt_save_path_LD
-+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:3882: -1- AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+dnl we can't use the lt_simple_compile_test_code here,
-+dnl because it contains code intended for an executable,
-+dnl not a library. It's possible we should let each
-+dnl tag define a new lt_????_link_test_code variable,
-+dnl but it's only used here...
-+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-+int a;
-+void foo (void) { a = 0; }
-+EOF
-+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-+class Foo
-+{
-+public:
-+ Foo (void) { a = 0; }
-+private:
-+ int a;
-+};
-+EOF
-+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-+ subroutine foo
-+ implicit none
-+ integer*4 a
-+ a=0
-+ return
-+ end
-+EOF
-+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-+public class foo {
-+ private int a;
-+ public void bar (void) {
-+ a = 0;
-+ }
-+};
-+EOF
-+])
-+dnl Parse the compiler output and extract the necessary
-+dnl objects, libraries and library flags.
-+if AC_TRY_EVAL(ac_compile); then
-+ # Parse the compiler output and extract the necessary
-+ # objects, libraries and library flags.
-+
-+ # Sentinel used to keep track of whether or not we are before
-+ # the conftest object file.
-+ pre_test_object_deps_done=no
-+
-+ # The `*' in the case matches for architectures that use `case' in
-+ # $output_verbose_cmd can trigger glob expansion during the loop
-+ # eval without this substitution.
-+ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-+
-+ for p in `eval $output_verbose_link_cmd`; do
-+ case $p in
-+
-+ -L* | -R* | -l*)
-+ # Some compilers place space between "-{L,R}" and the path.
-+ # Remove the space.
-+ if test $p = "-L" \
-+ || test $p = "-R"; then
-+ prev=$p
-+ continue
-+ else
-+ prev=
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ case $p in
-+ -L* | -R*)
-+ # Internal compiler library paths should come after those
-+ # provided the user. The postdeps already come after the
-+ # user supplied libs so there is no need to process them.
-+ if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-+ else
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-+ fi
-+ ;;
-+ # The "-l" case would never come before the object being
-+ # linked, so don't bother handling this case.
-+ esac
-+ else
-+ if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-+ _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-+ else
-+ _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-+ fi
-+ fi
-+ ;;
-+
-+ *.$objext)
-+ # This assumes that the test object file only shows up
-+ # once in the compiler output.
-+ if test "$p" = "conftest.$objext"; then
-+ pre_test_object_deps_done=yes
-+ continue
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-+ _LT_AC_TAGVAR(predep_objects, $1)="$p"
-+ else
-+ _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-+ fi
-+ else
-+ if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-+ _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-+ else
-+ _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-+ fi
-+ fi
-+ ;;
-+
-+ *) ;; # Ignore the rest.
-+
-+ esac
-+ done
-+
-+ # Clean up.
-+ rm -f a.out a.exe
-+else
-+ echo "libtool.m4: error: problem compiling $1 test program"
-+fi
-+
-+$rm -f confest.$objext
-+
-+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-+if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-+ _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-+fi
-+
-+# PORTME: override above test on systems where it is broken
-+ifelse([$1],[CXX],
-+[case $host_os in
-+interix[[3-9]]*)
-+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
-+ # hack all around it, let's just trust "g++" to DTRT.
-+ _LT_AC_TAGVAR(predep_objects,$1)=
-+ _LT_AC_TAGVAR(postdep_objects,$1)=
-+ _LT_AC_TAGVAR(postdeps,$1)=
-+ ;;
-+
-+linux*)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ #
-+ # The more standards-conforming stlport4 library is
-+ # incompatible with the Cstd library. Avoid specifying
-+ # it if it's in CXXFLAGS. Ignore libCrun as
-+ # -library=stlport4 depends on it.
-+ case " $CXX $CXXFLAGS " in
-+ *" -library=stlport4 "*)
-+ solaris_use_stlport4=yes
-+ ;;
-+ esac
-+ if test "$solaris_use_stlport4" != yes; then
-+ _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # The more standards-conforming stlport4 library is
-+ # incompatible with the Cstd library. Avoid specifying
-+ # it if it's in CXXFLAGS. Ignore libCrun as
-+ # -library=stlport4 depends on it.
-+ case " $CXX $CXXFLAGS " in
-+ *" -library=stlport4 "*)
-+ solaris_use_stlport4=yes
-+ ;;
-+ esac
-+
-+ # Adding this requires a known-good setup of shared libraries for
-+ # Sun compiler versions before 5.6, else PIC objects from an old
-+ # archive will be linked into the output, leading to subtle bugs.
-+ if test "$solaris_use_stlport4" != yes; then
-+ _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+esac
-+])
-+case " $_LT_AC_TAGVAR(postdeps, $1) " in
-+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-+esac
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:4079: -1- AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-+m4trace:/usr/share/aclocal/libtool.m4:4080: -1- AC_DEFUN([_LT_AC_LANG_F77_CONFIG], [AC_REQUIRE([AC_PROG_F77])
-+AC_LANG_PUSH(Fortran 77)
-+
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+_LT_AC_TAGVAR(always_export_symbols, $1)=no
-+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_direct, $1)=no
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+_LT_AC_TAGVAR(module_cmds, $1)=
-+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-+_LT_AC_TAGVAR(no_undefined_flag, $1)=
-+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+
-+# Source file extension for f77 test sources.
-+ac_ext=f
-+
-+# Object file extension for compiled f77 test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="\
-+ subroutine t
-+ return
-+ end
-+"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="\
-+ program t
-+ end
-+"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${F77-"f77"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_CC_BASENAME([$compiler])
-+
-+AC_MSG_CHECKING([if libtool supports shared libraries])
-+AC_MSG_RESULT([$can_build_shared])
-+
-+AC_MSG_CHECKING([whether to build shared libraries])
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+aix[[4-9]]*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+AC_MSG_RESULT([$enable_shared])
-+
-+AC_MSG_CHECKING([whether to build static libraries])
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+AC_MSG_RESULT([$enable_static])
-+
-+_LT_AC_TAGVAR(GCC, $1)="$G77"
-+_LT_AC_TAGVAR(LD, $1)="$LD"
-+
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC="$lt_save_CC"
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:4188: -1- AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-+m4trace:/usr/share/aclocal/libtool.m4:4189: -1- AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], [AC_LANG_SAVE
-+
-+# Source file extension for Java test sources.
-+ac_ext=java
-+
-+# Object file extension for compiled Java test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="class foo {}"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${GCJ-"gcj"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_CC_BASENAME([$compiler])
-+
-+# GCJ did not exist at the time GCC didn't implicitly link libc in.
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+
-+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_RESTORE
-+CC="$lt_save_CC"
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:4248: -1- AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-+m4trace:/usr/share/aclocal/libtool.m4:4249: -1- AC_DEFUN([_LT_AC_LANG_RC_CONFIG], [AC_LANG_SAVE
-+
-+# Source file extension for RC test sources.
-+ac_ext=rc
-+
-+# Object file extension for compiled RC test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="$lt_simple_compile_test_code"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${RC-"windres"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_CC_BASENAME([$compiler])
-+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_RESTORE
-+CC="$lt_save_CC"
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:4293: -1- AC_DEFUN([AC_LIBTOOL_CONFIG], [# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ _LT_AC_TAGVAR(compiler, $1) \
-+ _LT_AC_TAGVAR(CC, $1) \
-+ _LT_AC_TAGVAR(LD, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-+ _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-+ _LT_AC_TAGVAR(old_archive_cmds, $1) \
-+ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-+ _LT_AC_TAGVAR(predep_objects, $1) \
-+ _LT_AC_TAGVAR(postdep_objects, $1) \
-+ _LT_AC_TAGVAR(predeps, $1) \
-+ _LT_AC_TAGVAR(postdeps, $1) \
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-+ _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
-+ _LT_AC_TAGVAR(archive_cmds, $1) \
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-+ _LT_AC_TAGVAR(postinstall_cmds, $1) \
-+ _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-+ _LT_AC_TAGVAR(no_undefined_flag, $1) \
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-+ _LT_AC_TAGVAR(hardcode_automatic, $1) \
-+ _LT_AC_TAGVAR(module_cmds, $1) \
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-+ _LT_AC_TAGVAR(fix_srcfile_path, $1) \
-+ _LT_AC_TAGVAR(exclude_expsyms, $1) \
-+ _LT_AC_TAGVAR(include_expsyms, $1); do
-+
-+ case $var in
-+ _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-+ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-+ _LT_AC_TAGVAR(archive_cmds, $1) | \
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-+ _LT_AC_TAGVAR(module_cmds, $1) | \
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\[$]0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+ifelse([$1], [],
-+ [cfgfile="${ofile}T"
-+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+ $rm -f "$cfgfile"
-+ AC_MSG_NOTICE([creating $ofile])],
-+ [cfgfile="$ofile"])
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+ifelse([$1], [],
-+[#! $SHELL
-+
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-+# Free Software Foundation, Inc.
-+#
-+# This file is part of GNU Libtool:
-+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A sed program that does not truncate output.
-+SED=$lt_SED
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="$SED -e 1s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+# The names of the tagged configurations supported by this script.
-+available_tags=
-+
-+# ### BEGIN LIBTOOL CONFIG],
-+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-+
-+# The directories searched by this compiler when creating a shared
-+# library
-+compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-+
-+ifelse([$1],[],
-+[# ### END LIBTOOL CONFIG],
-+[# ### END LIBTOOL TAG CONFIG: $tagname])
-+
-+__EOF__
-+
-+ifelse([$1],[], [
-+ case $host_os in
-+ aix3*)
-+ cat <<\EOF >> "$cfgfile"
-+
-+# AIX sometimes has problems with the GCC collect2 program. For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+fi
-+EOF
-+ ;;
-+ esac
-+
-+ # We use sed instead of cat because bash on DJGPP gets confused if
-+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
-+ # text mode, it properly converts lines to CR/LF. This bash problem
-+ # is reportedly fixed, but why not run on old versions too?
-+ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-+
-+ mv -f "$cfgfile" "$ofile" || \
-+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+ chmod +x "$ofile"
-+])
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:4789: -1- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+
-+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-+
-+if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-+
-+ AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-+ lt_cv_prog_compiler_rtti_exceptions,
-+ [-fno-rtti -fno-exceptions], [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:4807: -1- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_REQUIRE([AC_CANONICAL_HOST])
-+AC_REQUIRE([LT_AC_PROG_SED])
-+AC_REQUIRE([AC_PROG_NM])
-+AC_REQUIRE([AC_OBJEXT])
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-+[
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[[BCDEGRST]]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-+
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+
-+# Define system-specific variables.
-+case $host_os in
-+aix*)
-+ symcode='[[BCDT]]'
-+ ;;
-+cygwin* | mingw* | pw32*)
-+ symcode='[[ABCDGISTW]]'
-+ ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+ if test "$host_cpu" = ia64; then
-+ symcode='[[ABCDEGRST]]'
-+ fi
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ ;;
-+linux* | k*bsd*-gnu)
-+ if test "$host_cpu" = ia64; then
-+ symcode='[[ABCDGIRSTW]]'
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ fi
-+ ;;
-+irix* | nonstopux*)
-+ symcode='[[BCDEGRST]]'
-+ ;;
-+osf*)
-+ symcode='[[BCDEGQRST]]'
-+ ;;
-+solaris*)
-+ symcode='[[BDRT]]'
-+ ;;
-+sco3.2v5*)
-+ symcode='[[DT]]'
-+ ;;
-+sysv4.2uw2*)
-+ symcode='[[DT]]'
-+ ;;
-+sysv5* | sco5v6* | unixware* | OpenUNIX*)
-+ symcode='[[ABDT]]'
-+ ;;
-+sysv4)
-+ symcode='[[DFNSTU]]'
-+ ;;
-+esac
-+
-+# Handle CRLF in mingw tool chain
-+opt_cr=
-+case $build_os in
-+mingw*)
-+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-+ ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+case `$NM -V 2>&1` in
-+*GNU* | *'with BFD'*)
-+ symcode='[[ABCDGIRSTW]]' ;;
-+esac
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-+ symxfrm="\\1 $ac_symprfx\\2 \\2"
-+
-+ # Write the raw and C identifiers.
-+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-+
-+ # Check to see that the pipe works correctly.
-+ pipe_works=no
-+
-+ rm -f conftest*
-+ cat > conftest.$ac_ext <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+int main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+ if AC_TRY_EVAL(ac_compile); then
-+ # Now try to grab the symbols.
-+ nlist=conftest.nm
-+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-+ # Try sorting and uniquifying the output.
-+ if sort "$nlist" | uniq > "$nlist"T; then
-+ mv -f "$nlist"T "$nlist"
-+ else
-+ rm -f "$nlist"T
-+ fi
-+
-+ # Make sure that we snagged all the symbols we need.
-+ if grep ' nm_test_var$' "$nlist" >/dev/null; then
-+ if grep ' nm_test_func$' "$nlist" >/dev/null; then
-+ cat <<EOF > conftest.$ac_ext
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+ # Now generate the symbol file.
-+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-+
-+ cat <<EOF >> conftest.$ac_ext
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+ const char *name;
-+ lt_ptr_t address;
-+}
-+lt_preloaded_symbols[[]] =
-+{
-+EOF
-+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-+ cat <<\EOF >> conftest.$ac_ext
-+ {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+ # Now try linking the two files.
-+ mv conftest.$ac_objext conftstm.$ac_objext
-+ lt_save_LIBS="$LIBS"
-+ lt_save_CFLAGS="$CFLAGS"
-+ LIBS="conftstm.$ac_objext"
-+ CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-+ pipe_works=yes
-+ fi
-+ LIBS="$lt_save_LIBS"
-+ CFLAGS="$lt_save_CFLAGS"
-+ else
-+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-+ cat conftest.$ac_ext >&5
-+ fi
-+ rm -rf conftest* conftst*
-+
-+ # Do not use the global_symbol_pipe unless it works.
-+ if test "$pipe_works" = yes; then
-+ break
-+ else
-+ lt_cv_sys_global_symbol_pipe=
-+ fi
-+done
-+])
-+if test -z "$lt_cv_sys_global_symbol_pipe"; then
-+ lt_cv_sys_global_symbol_to_cdecl=
-+fi
-+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-+ AC_MSG_RESULT(failed)
-+else
-+ AC_MSG_RESULT(ok)
-+fi
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:5010: -1- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], [_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-+
-+AC_MSG_CHECKING([for $compiler option to produce PIC])
-+ ifelse([$1],[CXX],[
-+ # C++ specific cases for pic, static, wl, etc.
-+ if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+ mingw* | cygwin* | os2* | pw32*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+ m4_if([$1], [GCJ], [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-+ ;;
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-+ ;;
-+ *djgpp*)
-+ # DJGPP does not support shared libraries at all
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ ;;
-+ interix[[3-9]]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-+ fi
-+ ;;
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ else
-+ case $host_os in
-+ aix[[4-9]]*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ else
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ chorus*)
-+ case $cc_basename in
-+ cxch68*)
-+ # Green Hills C++ Compiler
-+ # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-+ ;;
-+ esac
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ freebsd* | dragonfly*)
-+ # FreeBSD uses GNU C++
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-+ if test "$host_cpu" != ia64; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ fi
-+ ;;
-+ aCC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ interix*)
-+ # This is c89, which is MS Visual C++ (no shared libs)
-+ # Anyone wants to do a port?
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ # CC pic flag -KPIC is the default.
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ KCC*)
-+ # KAI C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ icpc* | ecpc*)
-+ # Intel C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+ ;;
-+ pgCC* | pgcpp*)
-+ # Portland Group C++ compiler.
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C++ 5.9
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ ;;
-+ m88k*)
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu)
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ cxx*)
-+ # Digital/Compaq C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ lcc*)
-+ # Lucid
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ ;;
-+ esac
-+ fi
-+],
-+[
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+ # (--disable-auto-import) libraries
-+ m4_if([$1], [GCJ], [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-+ ;;
-+
-+ interix[[3-9]]*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ else
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | cygwin* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ m4_if([$1], [GCJ], [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ ccc*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # All Alpha code is PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ # Sun C 5.9
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ ;;
-+ *Sun\ F*)
-+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # All OSF/1 code is PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+
-+ rdos*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ ;;
-+
-+ uts4*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ ;;
-+ esac
-+ fi
-+])
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-+ AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-+ _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
-+ [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-+ [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-+ "" | " "*) ;;
-+ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-+ esac],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-+ _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-+ $lt_tmp_static_flag,
-+ [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:5572: -1- AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-+ifelse([$1],[CXX],[
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ case $host_os in
-+ aix[[4-9]]*)
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ ;;
-+ pw32*)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-+ ;;
-+ cygwin* | mingw*)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-+],[
-+ runpath_var=
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+ _LT_AC_TAGVAR(archive_cmds, $1)=
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+ _LT_AC_TAGVAR(module_cmds, $1)=
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ _LT_AC_TAGVAR(include_expsyms, $1)=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ # Exclude shared library initialization/finalization symbols.
-+dnl Note also adjust exclude_expsyms for C++ above.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ _LT_CC_BASENAME([$compiler])
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix[[3-9]]*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+
-+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ interix[[3-9]]*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ gnu* | linux* | k*bsd*-gnu)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*) # Sun C 5.9
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_sharedflag='-G' ;;
-+ *Sun\ F*) # Sun Fortran 8.3
-+ tmp_sharedflag='-G' ;;
-+ *)
-+ tmp_sharedflag='-shared' ;;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
-+ runpath_var=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ fi
-+ ;;
-+
-+ aix[[4-9]]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ _LT_AC_TAGVAR(archive_cmds, $1)=''
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ # see comment about different semantics on the GNU ld section
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ bsdi[[45]]*)
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-+ # FIXME: Should let the user specify the lib program.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-+ _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ freebsd1*)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ newsos6)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ os2*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ else
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-+
-+ solaris*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ case $host_os in
-+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-+ *)
-+ # The compiler driver will combine and reorder linker options,
-+ # but understands `-z linker_flag'. GCC discards it without `$wl',
-+ # but is careful enough not to reorder.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ else
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-+ fi
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ ;;
-+ motorola)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ sysv4.3*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ *)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ fi
-+])
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-+x|xyes)
-+ # Assume -lc should be added
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $_LT_AC_TAGVAR(archive_cmds, $1) in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-+ $rm conftest*
-+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-+ pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+ if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-+ then
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ else
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ fi
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:6521: -1- AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-+# /* ltdll.c starts here */
-+# #define WIN32_LEAN_AND_MEAN
-+# #include <windows.h>
-+# #undef WIN32_LEAN_AND_MEAN
-+# #include <stdio.h>
-+#
-+# #ifndef __CYGWIN__
-+# # ifdef __CYGWIN32__
-+# # define __CYGWIN__ __CYGWIN32__
-+# # endif
-+# #endif
-+#
-+# #ifdef __cplusplus
-+# extern "C" {
-+# #endif
-+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-+# #ifdef __cplusplus
-+# }
-+# #endif
-+#
-+# #ifdef __CYGWIN__
-+# #include <cygwin/cygwin_dll.h>
-+# DECLARE_CYGWIN_DLL( DllMain );
-+# #endif
-+# HINSTANCE __hDllInstance_base;
-+#
-+# BOOL APIENTRY
-+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-+# {
-+# __hDllInstance_base = hInst;
-+# return TRUE;
-+# }
-+# /* ltdll.c ends here */
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:6560: -1- AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-+m4trace:/usr/share/aclocal/libtool.m4:6564: -1- AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-+m4trace:/usr/share/aclocal/libtool.m4:6565: -1- AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-+m4trace:/usr/share/aclocal/libtool.m4:6566: -1- AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-+m4trace:/usr/share/aclocal/libtool.m4:6567: -1- AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-+m4trace:/usr/share/aclocal/libtool.m4:6568: -1- AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-+m4trace:/usr/share/aclocal/libtool.m4:6569: -1- AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-+m4trace:/usr/share/aclocal/libtool.m4:6570: -1- AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-+m4trace:/usr/share/aclocal/libtool.m4:6575: -1- AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no)
-+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-+ AC_SUBST(GCJFLAGS)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:6581: -1- AC_DEFUN([LT_AC_PROG_RC], [AC_CHECK_TOOL(RC, windres, no)
-+])
-+m4trace:/usr/share/aclocal/libtool.m4:6619: -1- AC_DEFUN([LT_AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output])
-+AC_CACHE_VAL(lt_cv_path_SED,
-+[# Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for lt_ac_prog in sed gsed; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
-+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-+ fi
-+ done
-+ done
-+done
-+IFS=$as_save_IFS
-+lt_ac_max=0
-+lt_ac_count=0
-+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+# along with /bin/sed that truncates output.
-+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-+ test ! -f $lt_ac_sed && continue
-+ cat /dev/null > conftest.in
-+ lt_ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-+ # Check for GNU sed and select it if it is found.
-+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-+ lt_cv_path_SED=$lt_ac_sed
-+ break
-+ fi
-+ while true; do
-+ cat conftest.in conftest.in >conftest.tmp
-+ mv conftest.tmp conftest.in
-+ cp conftest.in conftest.nl
-+ echo >>conftest.nl
-+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-+ cmp -s conftest.out conftest.nl || break
-+ # 10000 chars as input seems more than enough
-+ test $lt_ac_count -gt 10 && break
-+ lt_ac_count=`expr $lt_ac_count + 1`
-+ if test $lt_ac_count -gt $lt_ac_max; then
-+ lt_ac_max=$lt_ac_count
-+ lt_cv_path_SED=$lt_ac_sed
-+ fi
-+ done
-+done
-+])
-+SED=$lt_cv_path_SED
-+AC_SUBST([SED])
-+AC_MSG_RESULT([$SED])
-+])
-+m4trace:/usr/share/aclocal-1.10/amversion.m4:14: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.10'
-+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-+dnl require some minimum version. Point them to the right macro.
-+m4_if([$1], [1.10.1], [],
-+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-+])
-+m4trace:/usr/share/aclocal-1.10/amversion.m4:33: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.10.1])dnl
-+m4_ifndef([AC_AUTOCONF_VERSION],
-+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-+_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
-+m4trace:/usr/share/aclocal-1.10/as.m4:13: -1- AC_DEFUN([AM_PROG_AS], [# By default we simply use the C compiler to build assembly code.
-+AC_REQUIRE([AC_PROG_CC])
-+test "${CCAS+set}" = set || CCAS=$CC
-+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-+AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)])
-+AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
-+_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
-+])
-+m4trace:/usr/share/aclocal-1.10/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly.
-+AC_PREREQ([2.50])dnl
-+# expand $ac_aux_dir to an absolute path
-+am_aux_dir=`cd $ac_aux_dir && pwd`
-+])
-+m4trace:/usr/share/aclocal-1.10/cond.m4:15: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl
-+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
-+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-+AC_SUBST([$1_TRUE])dnl
-+AC_SUBST([$1_FALSE])dnl
-+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-+if $2; then
-+ $1_TRUE=
-+ $1_FALSE='#'
-+else
-+ $1_TRUE='#'
-+ $1_FALSE=
-+fi
-+AC_CONFIG_COMMANDS_PRE(
-+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-+ AC_MSG_ERROR([[conditional "$1" was never defined.
-+Usually this means the macro was only invoked conditionally.]])
-+fi])])
-+m4trace:/usr/share/aclocal-1.10/depend.m4:28: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl
-+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-+AC_REQUIRE([AM_DEP_TRACK])dnl
-+
-+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
-+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
-+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
-+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
-+ [depcc="$$1" am_compiler_list=])
-+
-+AC_CACHE_CHECK([dependency style of $depcc],
-+ [am_cv_$1_dependencies_compiler_type],
-+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+ # We make a subdir and do the tests there. Otherwise we can end up
-+ # making bogus files that we don't know about and never remove. For
-+ # instance it was reported that on HP-UX the gcc test will end up
-+ # making a dummy file named `D' -- because `-MD' means `put the output
-+ # in D'.
-+ mkdir conftest.dir
-+ # Copy depcomp to subdir because otherwise we won't find it if we're
-+ # using a relative directory.
-+ cp "$am_depcomp" conftest.dir
-+ cd conftest.dir
-+ # We will build objects and dependencies in a subdirectory because
-+ # it helps to detect inapplicable dependency modes. For instance
-+ # both Tru64's cc and ICC support -MD to output dependencies as a
-+ # side effect of compilation, but ICC will put the dependencies in
-+ # the current directory while Tru64 will put them in the object
-+ # directory.
-+ mkdir sub
-+
-+ am_cv_$1_dependencies_compiler_type=none
-+ if test "$am_compiler_list" = ""; then
-+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-+ fi
-+ for depmode in $am_compiler_list; do
-+ # Setup a source with many dependencies, because some compilers
-+ # like to wrap large dependency lists on column 80 (with \), and
-+ # we should not choose a depcomp mode which is confused by this.
-+ #
-+ # We need to recreate these files for each test, as the compiler may
-+ # overwrite some of them when testing with obscure command lines.
-+ # This happens at least with the AIX C compiler.
-+ : > sub/conftest.c
-+ for i in 1 2 3 4 5 6; do
-+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
-+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-+ # Solaris 8's {/usr,}/bin/sh.
-+ touch sub/conftst$i.h
-+ done
-+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-+
-+ case $depmode in
-+ nosideeffect)
-+ # after this tag, mechanisms are not by side-effect, so they'll
-+ # only be used when explicitly requested
-+ if test "x$enable_dependency_tracking" = xyes; then
-+ continue
-+ else
-+ break
-+ fi
-+ ;;
-+ none) break ;;
-+ esac
-+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+ # mode. It turns out that the SunPro C++ compiler does not properly
-+ # handle `-M -o', and we need to detect this.
-+ if depmode=$depmode \
-+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-+ >/dev/null 2>conftest.err &&
-+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+ # icc doesn't choke on unknown options, it will just issue warnings
-+ # or remarks (even with -Werror). So we grep stderr for any message
-+ # that says an option was ignored or not supported.
-+ # When given -MP, icc 7.0 and 7.1 complain thusly:
-+ # icc: Command line warning: ignoring option '-M'; no argument required
-+ # The diagnosis changed in icc 8.0:
-+ # icc: Command line remark: option '-MP' not supported
-+ if (grep 'ignoring option' conftest.err ||
-+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-+ am_cv_$1_dependencies_compiler_type=$depmode
-+ break
-+ fi
-+ fi
-+ done
-+
-+ cd ..
-+ rm -rf conftest.dir
-+else
-+ am_cv_$1_dependencies_compiler_type=none
-+fi
-+])
-+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-+AM_CONDITIONAL([am__fastdep$1], [
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-+])
-+m4trace:/usr/share/aclocal-1.10/depend.m4:139: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-+])
-+m4trace:/usr/share/aclocal-1.10/depend.m4:147: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking,
-+[ --disable-dependency-tracking speeds up one-time build
-+ --enable-dependency-tracking do not reject slow dependency extractors])
-+if test "x$enable_dependency_tracking" != xno; then
-+ am_depcomp="$ac_aux_dir/depcomp"
-+ AMDEPBACKSLASH='\'
-+fi
-+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-+AC_SUBST([AMDEPBACKSLASH])dnl
-+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-+])
-+m4trace:/usr/share/aclocal-1.10/depout.m4:14: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do
-+ # Strip MF so we end up with the name of the file.
-+ mf=`echo "$mf" | sed -e 's/:.*$//'`
-+ # Check whether this is an Automake generated Makefile or not.
-+ # We used to match only the files named `Makefile.in', but
-+ # some people rename them; so instead we look at the file content.
-+ # Grep'ing the first line is not enough: some people post-process
-+ # each Makefile.in and add a new line on top of each file to say so.
-+ # Grep'ing the whole file is not good either: AIX grep has a line
-+ # limit of 2048, but all sed's we know have understand at least 4000.
-+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-+ dirpart=`AS_DIRNAME("$mf")`
-+ else
-+ continue
-+ fi
-+ # Extract the definition of DEPDIR, am__include, and am__quote
-+ # from the Makefile without running `make'.
-+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-+ test -z "$DEPDIR" && continue
-+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
-+ test -z "am__include" && continue
-+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-+ # When using ansi2knr, U may be empty or an underscore; expand it
-+ U=`sed -n 's/^U = //p' < "$mf"`
-+ # Find all dependency output files, they are included files with
-+ # $(DEPDIR) in their names. We invoke sed twice because it is the
-+ # simplest approach to changing $(DEPDIR) to its actual value in the
-+ # expansion.
-+ for file in `sed -n "
-+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-+ # Make sure the directory exists.
-+ test -f "$dirpart/$file" && continue
-+ fdir=`AS_DIRNAME(["$file"])`
-+ AS_MKDIR_P([$dirpart/$fdir])
-+ # echo "creating $dirpart/$file"
-+ echo '# dummy' > "$dirpart/$file"
-+ done
-+done
-+])
-+m4trace:/usr/share/aclocal-1.10/depout.m4:64: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles],
-+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-+])
-+m4trace:/usr/share/aclocal-1.10/init.m4:26: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.60])dnl
-+dnl Autoconf wants to disallow AM_ names. We explicitly allow
-+dnl the ones we care about.
-+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-+AC_REQUIRE([AC_PROG_INSTALL])dnl
-+if test "`cd $srcdir && pwd`" != "`pwd`"; then
-+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-+ # is not polluted with repeated "-I."
-+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-+ # test to see if srcdir already configured
-+ if test -f $srcdir/config.status; then
-+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-+ fi
-+fi
-+
-+# test whether we have cygpath
-+if test -z "$CYGPATH_W"; then
-+ if (cygpath --version) >/dev/null 2>/dev/null; then
-+ CYGPATH_W='cygpath -w'
-+ else
-+ CYGPATH_W=echo
-+ fi
-+fi
-+AC_SUBST([CYGPATH_W])
-+
-+# Define the identity of the package.
-+dnl Distinguish between old-style and new-style calls.
-+m4_ifval([$2],
-+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
-+ AC_SUBST([PACKAGE], [$1])dnl
-+ AC_SUBST([VERSION], [$2])],
-+[_AM_SET_OPTIONS([$1])dnl
-+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
-+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
-+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-+
-+_AM_IF_OPTION([no-define],,
-+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-+
-+# Some tools Automake needs.
-+AC_REQUIRE([AM_SANITY_CHECK])dnl
-+AC_REQUIRE([AC_ARG_PROGRAM])dnl
-+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-+AM_MISSING_PROG(AUTOCONF, autoconf)
-+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-+AM_MISSING_PROG(AUTOHEADER, autoheader)
-+AM_MISSING_PROG(MAKEINFO, makeinfo)
-+AM_PROG_INSTALL_SH
-+AM_PROG_INSTALL_STRIP
-+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-+# We need awk for the "check" target. The system "awk" is bad on
-+# some platforms.
-+AC_REQUIRE([AC_PROG_AWK])dnl
-+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-+ [_AM_PROG_TAR([v7])])])
-+_AM_IF_OPTION([no-dependencies],,
-+[AC_PROVIDE_IFELSE([AC_PROG_CC],
-+ [_AM_DEPENDENCIES(CC)],
-+ [define([AC_PROG_CC],
-+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-+AC_PROVIDE_IFELSE([AC_PROG_CXX],
-+ [_AM_DEPENDENCIES(CXX)],
-+ [define([AC_PROG_CXX],
-+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-+ [_AM_DEPENDENCIES(OBJC)],
-+ [define([AC_PROG_OBJC],
-+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-+])
-+])
-+m4trace:/usr/share/aclocal-1.10/init.m4:113: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers.
-+_am_arg=$1
-+_am_stamp_count=1
-+for _am_header in $config_headers :; do
-+ case $_am_header in
-+ $_am_arg | $_am_arg:* )
-+ break ;;
-+ * )
-+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-+ esac
-+done
-+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-+m4trace:/usr/share/aclocal-1.10/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-+AC_SUBST(install_sh)])
-+m4trace:/usr/share/aclocal-1.10/lead-dot.m4:12: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null
-+mkdir .tst 2>/dev/null
-+if test -d .tst; then
-+ am__leading_dot=.
-+else
-+ am__leading_dot=_
-+fi
-+rmdir .tst 2>/dev/null
-+AC_SUBST([am__leading_dot])])
-+m4trace:/usr/share/aclocal-1.10/maintainer.m4:13: -1- AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-+ dnl maintainer-mode is disabled by default
-+ AC_ARG_ENABLE(maintainer-mode,
-+[ --enable-maintainer-mode enable make rules and dependencies not useful
-+ (and sometimes confusing) to the casual installer],
-+ USE_MAINTAINER_MODE=$enableval,
-+ USE_MAINTAINER_MODE=no)
-+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-+ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
-+ MAINT=$MAINTAINER_MODE_TRUE
-+ AC_SUBST(MAINT)dnl
-+
-+])
-+m4trace:/usr/share/aclocal-1.10/maintainer.m4:28: -1- AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-+m4trace:/usr/share/aclocal-1.10/maintainer.m4:28: -1- AC_DEFUN([jm_MAINTAINER_MODE], [AC_DIAGNOSE([obsolete], [The macro `jm_MAINTAINER_MODE' is obsolete.
-+You should run autoupdate.])dnl
-+AM_MAINTAINER_MODE])
-+m4trace:/usr/share/aclocal-1.10/make.m4:14: -1- AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make}
-+cat > confinc << 'END'
-+am__doit:
-+ @echo done
-+.PHONY: am__doit
-+END
-+# If we don't find an include directive, just comment out the code.
-+AC_MSG_CHECKING([for style of include used by $am_make])
-+am__include="#"
-+am__quote=
-+_am_result=none
-+# First try GNU make style include.
-+echo "include confinc" > confmf
-+# We grep out `Entering directory' and `Leaving directory'
-+# messages which can occur if `w' ends up in MAKEFLAGS.
-+# In particular we don't look at `^make:' because GNU make might
-+# be invoked under some other name (usually "gmake"), in which
-+# case it prints its new name instead of `make'.
-+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-+ am__include=include
-+ am__quote=
-+ _am_result=GNU
-+fi
-+# Now try BSD make style include.
-+if test "$am__include" = "#"; then
-+ echo '.include "confinc"' > confmf
-+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-+ am__include=.include
-+ am__quote="\""
-+ _am_result=BSD
-+ fi
-+fi
-+AC_SUBST([am__include])
-+AC_SUBST([am__quote])
-+AC_MSG_RESULT([$_am_result])
-+rm -f confinc confmf
-+])
-+m4trace:/usr/share/aclocal-1.10/missing.m4:14: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN])
-+$1=${$1-"${am_missing_run}$2"}
-+AC_SUBST($1)])
-+m4trace:/usr/share/aclocal-1.10/missing.m4:24: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-+AC_REQUIRE_AUX_FILE([missing])dnl
-+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-+# Use eval to expand $SHELL
-+if eval "$MISSING --run true"; then
-+ am_missing_run="$MISSING --run "
-+else
-+ am_missing_run=
-+ AC_MSG_WARN([`missing' script is too old or missing])
-+fi
-+])
-+m4trace:/usr/share/aclocal-1.10/mkdirp.m4:11: -1- AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl
-+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-+dnl while keeping a definition of mkdir_p for backward compatibility.
-+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-+dnl Makefile.ins that do not define MKDIR_P, so we do our own
-+dnl adjustment using top_builddir (which is defined more often than
-+dnl MKDIR_P).
-+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-+case $mkdir_p in
-+ [[\\/$]]* | ?:[[\\/]]*) ;;
-+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-+esac
-+])
-+m4trace:/usr/share/aclocal-1.10/options.m4:13: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-+m4trace:/usr/share/aclocal-1.10/options.m4:19: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-+m4trace:/usr/share/aclocal-1.10/options.m4:25: -1- AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-+m4trace:/usr/share/aclocal-1.10/options.m4:31: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-+m4trace:/usr/share/aclocal-1.10/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
-+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-+ (exit $ac_status); }])
-+m4trace:/usr/share/aclocal-1.10/sanity.m4:14: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane])
-+# Just in case
-+sleep 1
-+echo timestamp > conftest.file
-+# Do `set' in a subshell so we don't clobber the current shell's
-+# arguments. Must try -L first in case configure is actually a
-+# symlink; some systems play weird games with the mod time of symlinks
-+# (eg FreeBSD returns the mod time of the symlink's containing
-+# directory).
-+if (
-+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-+ if test "$[*]" = "X"; then
-+ # -L didn't work.
-+ set X `ls -t $srcdir/configure conftest.file`
-+ fi
-+ rm -f conftest.file
-+ if test "$[*]" != "X $srcdir/configure conftest.file" \
-+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
-+
-+ # If neither matched, then we have a broken ls. This can happen
-+ # if, for instance, CONFIG_SHELL is bash and it inherits a
-+ # broken ls alias from the environment. This has actually
-+ # happened. Such a system could not be considered "sane".
-+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-+alias in your environment])
-+ fi
-+
-+ test "$[2]" = conftest.file
-+ )
-+then
-+ # Ok.
-+ :
-+else
-+ AC_MSG_ERROR([newly created file is older than distributed files!
-+Check your system clock])
-+fi
-+AC_MSG_RESULT(yes)])
-+m4trace:/usr/share/aclocal-1.10/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-+# Installed binaries are usually stripped using `strip' when the user
-+# run `make install-strip'. However `strip' might not be the right
-+# tool to use in cross-compilation environments, therefore Automake
-+# will honor the `STRIP' environment variable to overrule this program.
-+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-+if test "$cross_compiling" != no; then
-+ AC_CHECK_TOOL([STRIP], [strip], :)
-+fi
-+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-+AC_SUBST([INSTALL_STRIP_PROGRAM])])
-+m4trace:/usr/share/aclocal-1.10/substnot.m4:12: -1- AC_DEFUN([_AM_SUBST_NOTMAKE])
-+m4trace:/usr/share/aclocal-1.10/tar.m4:24: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility.
-+AM_MISSING_PROG([AMTAR], [tar])
-+m4_if([$1], [v7],
-+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-+ [m4_case([$1], [ustar],, [pax],,
-+ [m4_fatal([Unknown tar format])])
-+AC_MSG_CHECKING([how to create a $1 tar archive])
-+# Loop over all known methods to create a tar archive until one works.
-+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-+# Do not fold the above two line into one, because Tru64 sh and
-+# Solaris sh will not grok spaces in the rhs of `-'.
-+for _am_tool in $_am_tools
-+do
-+ case $_am_tool in
-+ gnutar)
-+ for _am_tar in tar gnutar gtar;
-+ do
-+ AM_RUN_LOG([$_am_tar --version]) && break
-+ done
-+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-+ am__untar="$_am_tar -xf -"
-+ ;;
-+ plaintar)
-+ # Must skip GNU tar: if it does not support --format= it doesn't create
-+ # ustar tarball either.
-+ (tar --version) >/dev/null 2>&1 && continue
-+ am__tar='tar chf - "$$tardir"'
-+ am__tar_='tar chf - "$tardir"'
-+ am__untar='tar xf -'
-+ ;;
-+ pax)
-+ am__tar='pax -L -x $1 -w "$$tardir"'
-+ am__tar_='pax -L -x $1 -w "$tardir"'
-+ am__untar='pax -r'
-+ ;;
-+ cpio)
-+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-+ am__untar='cpio -i -H $1 -d'
-+ ;;
-+ none)
-+ am__tar=false
-+ am__tar_=false
-+ am__untar=false
-+ ;;
-+ esac
-+
-+ # If the value was cached, stop now. We just wanted to have am__tar
-+ # and am__untar set.
-+ test -n "${am_cv_prog_tar_$1}" && break
-+
-+ # tar/untar a dummy directory, and stop if the command works
-+ rm -rf conftest.dir
-+ mkdir conftest.dir
-+ echo GrepMe > conftest.dir/file
-+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-+ rm -rf conftest.dir
-+ if test -s conftest.tar; then
-+ AM_RUN_LOG([$am__untar <conftest.tar])
-+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-+ fi
-+done
-+rm -rf conftest.dir
-+
-+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-+AC_SUBST([am__tar])
-+AC_SUBST([am__untar])
-+])
-+m4trace:acinclude.m4:20: -1- AC_DEFUN([GC_SET_VERSION], [
-+ AC_MSG_CHECKING(GC version numbers)
-+ GC_VERSION_MAJOR=`echo $PACKAGE_VERSION | sed 's/^\([[0-9]][[0-9]]*\)[[.]].*$/\1/g'`
-+ GC_VERSION_MINOR=`echo $PACKAGE_VERSION | sed 's/^[[^.]]*[[.]]\([[0-9]][[0-9]]*\).*$/\1/g'`
-+ GC_ALPHA_VERSION=`echo $PACKAGE_VERSION | sed 's/^[[^.]]*[[.]][[0-9]]*//'`
-+
-+ case "$GC_ALPHA_VERSION" in
-+ alpha*)
-+ GC_ALPHA_VERSION=`echo $GC_ALPHA_VERSION \
-+ | sed 's/alpha\([[0-9]][[0-9]]*\)/\1/'` ;;
-+ *) GC_ALPHA_MAJOR='' ;;
-+ esac
-+
-+ if test :$GC_VERSION_MAJOR: = :: \
-+ -o :$GC_VERSION_MINOR: = :: ;
-+ then
-+ AC_MSG_RESULT(invalid)
-+ AC_MSG_ERROR([nonconforming PACKAGE_VERSION='$PACKAGE_VERSION'])
-+ fi
-+
-+ AC_DEFINE_UNQUOTED(GC_VERSION_MAJOR, $GC_VERSION_MAJOR)
-+ AC_DEFINE_UNQUOTED(GC_VERSION_MINOR, $GC_VERSION_MINOR)
-+ if test :$GC_ALPHA_VERSION: != :: ; then
-+ AC_DEFINE_UNQUOTED(GC_ALPHA_VERSION, $GC_ALPHA_VERSION)
-+ fi
-+ AC_MSG_RESULT(major=$GC_VERSION_MAJOR minor=$GC_VERSION_MINOR \
-+${GC_ALPHA_VERSION:+alpha=}$GC_ALPHA_VERSION)
-+])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^_?A[CHUM]_])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([_AC_])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS'])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^AS_FLAGS$])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^_?m4_])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^dnl$])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^_?AS_])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^SHELL$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PATH_SEPARATOR$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_NAME$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_VERSION$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_STRING$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^exec_prefix$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^prefix$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^program_transform_name$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^bindir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^sbindir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^libexecdir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^datarootdir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^datadir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^sysconfdir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^sharedstatedir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^localstatedir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^includedir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^oldincludedir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^docdir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^infodir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^htmldir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^dvidir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^pdfdir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^psdir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^libdir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^localedir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^mandir$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_NAME$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_VERSION$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_STRING$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^DEFS$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^ECHO_C$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^ECHO_N$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^ECHO_T$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^LIBS$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^build_alias$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^host_alias$])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^target_alias$])
-+m4trace:configure.in:20: -1- AM_INIT_AUTOMAKE([libgc-mono], [6.6], [no-define])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$])
-+m4trace:configure.in:20: -1- AM_SET_CURRENT_AUTOMAKE_VERSION
-+m4trace:configure.in:20: -1- AM_AUTOMAKE_VERSION([1.10.1])
-+m4trace:configure.in:20: -1- _AM_AUTOCONF_VERSION([2.61])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^INSTALL_DATA$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^am__isrc$])
-+m4trace:configure.in:20: -1- _AM_SUBST_NOTMAKE([am__isrc])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^CYGPATH_W$])
-+m4trace:configure.in:20: -1- _AM_SET_OPTION([no-define])
-+m4trace:configure.in:20: -2- _AM_MANGLE_OPTION([no-define])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^PACKAGE$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^VERSION$])
-+m4trace:configure.in:20: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])
-+m4trace:configure.in:20: -2- _AM_MANGLE_OPTION([no-define])
-+m4trace:configure.in:20: -1- AM_SANITY_CHECK
-+m4trace:configure.in:20: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-+m4trace:configure.in:20: -1- AM_MISSING_HAS_RUN
-+m4trace:configure.in:20: -1- AM_AUX_DIR_EXPAND
-+m4trace:configure.in:20: -1- m4_pattern_allow([^ACLOCAL$])
-+m4trace:configure.in:20: -1- AM_MISSING_PROG([AUTOCONF], [autoconf])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AUTOCONF$])
-+m4trace:configure.in:20: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AUTOMAKE$])
-+m4trace:configure.in:20: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AUTOHEADER$])
-+m4trace:configure.in:20: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^MAKEINFO$])
-+m4trace:configure.in:20: -1- AM_PROG_INSTALL_SH
-+m4trace:configure.in:20: -1- m4_pattern_allow([^install_sh$])
-+m4trace:configure.in:20: -1- AM_PROG_INSTALL_STRIP
-+m4trace:configure.in:20: -1- m4_pattern_allow([^STRIP$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$])
-+m4trace:configure.in:20: -1- AM_PROG_MKDIR_P
-+m4trace:configure.in:20: -1- m4_pattern_allow([^mkdir_p$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AWK$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^SET_MAKE$])
-+m4trace:configure.in:20: -1- AM_SET_LEADING_DOT
-+m4trace:configure.in:20: -1- m4_pattern_allow([^am__leading_dot$])
-+m4trace:configure.in:20: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-+ [_AM_PROG_TAR([v7])])])
-+m4trace:configure.in:20: -2- _AM_MANGLE_OPTION([tar-ustar])
-+m4trace:configure.in:20: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])
-+m4trace:configure.in:20: -2- _AM_MANGLE_OPTION([tar-pax])
-+m4trace:configure.in:20: -1- _AM_PROG_TAR([v7])
-+m4trace:configure.in:20: -1- AM_MISSING_PROG([AMTAR], [tar])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AMTAR$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^am__tar$])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^am__untar$])
-+m4trace:configure.in:20: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC],
-+ [_AM_DEPENDENCIES(CC)],
-+ [define([AC_PROG_CC],
-+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-+AC_PROVIDE_IFELSE([AC_PROG_CXX],
-+ [_AM_DEPENDENCIES(CXX)],
-+ [define([AC_PROG_CXX],
-+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-+ [_AM_DEPENDENCIES(OBJC)],
-+ [define([AC_PROG_OBJC],
-+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-+])
-+m4trace:configure.in:20: -2- _AM_MANGLE_OPTION([no-dependencies])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^build$])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^build_cpu$])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^build_vendor$])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^build_os$])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^host$])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^host_cpu$])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^host_vendor$])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^host_os$])
-+m4trace:configure.in:25: -1- m4_pattern_allow([^PACKAGE$])
-+m4trace:configure.in:26: -1- m4_pattern_allow([^GC_VERSION$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CFLAGS$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^LDFLAGS$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^LIBS$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CPPFLAGS$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^ac_ct_CC$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^EXEEXT$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^OBJEXT$])
-+m4trace:configure.in:28: -1- _AM_DEPENDENCIES([CC])
-+m4trace:configure.in:28: -1- AM_SET_DEPDIR
-+m4trace:configure.in:28: -1- m4_pattern_allow([^DEPDIR$])
-+m4trace:configure.in:28: -1- AM_OUTPUT_DEPENDENCY_COMMANDS
-+m4trace:configure.in:28: -1- AM_MAKE_INCLUDE
-+m4trace:configure.in:28: -1- m4_pattern_allow([^am__include$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^am__quote$])
-+m4trace:configure.in:28: -1- AM_DEP_TRACK
-+m4trace:configure.in:28: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^AMDEP_TRUE$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^AMDEP_FALSE$])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^AMDEPBACKSLASH$])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CCDEPMODE$])
-+m4trace:configure.in:28: -1- AM_CONDITIONAL([am__fastdepCC], [
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^am__fastdepCC_TRUE$])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^am__fastdepCC_FALSE$])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CXX$])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CXXFLAGS$])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^LDFLAGS$])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^LIBS$])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CPPFLAGS$])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CXX$])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^ac_ct_CXX$])
-+m4trace:configure.in:29: -1- _AM_DEPENDENCIES([CXX])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CXXDEPMODE$])
-+m4trace:configure.in:29: -1- AM_CONDITIONAL([am__fastdepCXX], [
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^am__fastdepCXX_TRUE$])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^am__fastdepCXX_FALSE$])
-+m4trace:configure.in:29: -1- _AM_SUBST_NOTMAKE([am__fastdepCXX_TRUE])
-+m4trace:configure.in:29: -1- _AM_SUBST_NOTMAKE([am__fastdepCXX_FALSE])
-+m4trace:configure.in:32: -1- AM_PROG_AS
-+m4trace:configure.in:32: -1- m4_pattern_allow([^CCAS$])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^CCASFLAGS$])
-+m4trace:configure.in:32: -1- _AM_IF_OPTION([no-dependencies], [], [_AM_DEPENDENCIES([CCAS])])
-+m4trace:configure.in:32: -2- _AM_MANGLE_OPTION([no-dependencies])
-+m4trace:configure.in:32: -1- _AM_DEPENDENCIES([CCAS])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^CCASDEPMODE$])
-+m4trace:configure.in:32: -1- AM_CONDITIONAL([am__fastdepCCAS], [
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^am__fastdepCCAS_TRUE$])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^am__fastdepCCAS_FALSE$])
-+m4trace:configure.in:32: -1- _AM_SUBST_NOTMAKE([am__fastdepCCAS_TRUE])
-+m4trace:configure.in:32: -1- _AM_SUBST_NOTMAKE([am__fastdepCCAS_FALSE])
-+m4trace:configure.in:33: -1- m4_pattern_allow([^AR$])
-+m4trace:configure.in:34: -1- m4_pattern_allow([^RANLIB$])
-+m4trace:configure.in:36: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
-+m4trace:configure.in:36: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
-+m4trace:configure.in:36: -1- m4_pattern_allow([^INSTALL_DATA$])
-+m4trace:configure.in:38: -1- AM_MAINTAINER_MODE
-+m4trace:configure.in:38: -1- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
-+m4trace:configure.in:38: -1- m4_pattern_allow([^MAINTAINER_MODE_TRUE$])
-+m4trace:configure.in:38: -1- m4_pattern_allow([^MAINTAINER_MODE_FALSE$])
-+m4trace:configure.in:38: -1- _AM_SUBST_NOTMAKE([MAINTAINER_MODE_TRUE])
-+m4trace:configure.in:38: -1- _AM_SUBST_NOTMAKE([MAINTAINER_MODE_FALSE])
-+m4trace:configure.in:38: -1- m4_pattern_allow([^MAINT$])
-+m4trace:configure.in:52: -1- m4_pattern_allow([^GC_CFLAGS$])
-+m4trace:configure.in:90: -1- m4_pattern_allow([^GC_LINUX_THREADS$])
-+m4trace:configure.in:91: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:93: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:95: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:98: -1- m4_pattern_allow([^GC_LINUX_THREADS$])
-+m4trace:configure.in:99: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:102: -1- m4_pattern_allow([^GC_AIX_THREADS$])
-+m4trace:configure.in:103: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:107: -1- m4_pattern_allow([^GC_HPUX_THREADS$])
-+m4trace:configure.in:108: -1- m4_pattern_allow([^_POSIX_C_SOURCE$])
-+m4trace:configure.in:110: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:112: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:116: -1- m4_pattern_allow([^GC_FREEBSD_THREADS$])
-+m4trace:configure.in:119: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:121: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:123: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:124: -1- m4_pattern_allow([^USE_COMPILER_TLS$])
-+m4trace:configure.in:128: -1- m4_pattern_allow([^GC_FREEBSD_THREADS$])
-+m4trace:configure.in:142: -1- m4_pattern_allow([^GC_FREEBSD_THREADS$])
-+m4trace:configure.in:147: -1- m4_pattern_allow([^GC_FREEBSD_THREADS$])
-+m4trace:configure.in:158: -1- m4_pattern_allow([^GC_SOLARIS_THREADS$])
-+m4trace:configure.in:159: -1- m4_pattern_allow([^GC_SOLARIS_PTHREADS$])
-+m4trace:configure.in:162: -1- m4_pattern_allow([^GC_IRIX_THREADS$])
-+m4trace:configure.in:165: -1- m4_pattern_allow([^GC_WIN32_THREADS$])
-+m4trace:configure.in:168: -1- m4_pattern_allow([^GC_DARWIN_THREADS$])
-+m4trace:configure.in:169: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:171: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:175: -1- m4_pattern_allow([^GC_NETBSD_THREADS$])
-+m4trace:configure.in:177: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:179: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:182: -1- m4_pattern_allow([^GC_OSF1_THREADS$])
-+m4trace:configure.in:184: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:185: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:198: -1- m4_pattern_allow([^GC_WIN32_THREADS$])
-+m4trace:configure.in:200: -1- m4_pattern_allow([^NO_GETENV$])
-+m4trace:configure.in:202: -1- m4_pattern_allow([^GC_INSIDE_DLL$])
-+m4trace:configure.in:211: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:213: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:214: -1- m4_pattern_allow([^GC_DGUX386_THREADS$])
-+m4trace:configure.in:215: -1- m4_pattern_allow([^DGUX_THREADS$])
-+m4trace:configure.in:222: -1- m4_pattern_allow([^GC_AIX_THREADS$])
-+m4trace:configure.in:223: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:232: -1- m4_pattern_allow([^THREADDLLIBS$])
-+m4trace:configure.in:239: -1- AM_CONDITIONAL([POWERPC_DARWIN], [test x$powerpc_darwin = xtrue])
-+m4trace:configure.in:239: -1- m4_pattern_allow([^POWERPC_DARWIN_TRUE$])
-+m4trace:configure.in:239: -1- m4_pattern_allow([^POWERPC_DARWIN_FALSE$])
-+m4trace:configure.in:239: -1- _AM_SUBST_NOTMAKE([POWERPC_DARWIN_TRUE])
-+m4trace:configure.in:239: -1- _AM_SUBST_NOTMAKE([POWERPC_DARWIN_FALSE])
-+m4trace:configure.in:242: -1- _m4_warn([obsolete], [The macro `AC_TRY_COMPILE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:2367: AC_TRY_COMPILE is expanded from...
-+configure.in:242: the top level])
-+m4trace:configure.in:248: -1- AM_CONDITIONAL([COMPILER_XLC], [test $compiler_xlc = yes])
-+m4trace:configure.in:248: -1- m4_pattern_allow([^COMPILER_XLC_TRUE$])
-+m4trace:configure.in:248: -1- m4_pattern_allow([^COMPILER_XLC_FALSE$])
-+m4trace:configure.in:248: -1- _AM_SUBST_NOTMAKE([COMPILER_XLC_TRUE])
-+m4trace:configure.in:248: -1- _AM_SUBST_NOTMAKE([COMPILER_XLC_FALSE])
-+m4trace:configure.in:251: -1- m4_pattern_allow([^DARWIN_DONT_PARSE_STACK$])
-+m4trace:configure.in:263: -1- m4_pattern_allow([^EXTRA_TEST_LIBS$])
-+m4trace:configure.in:266: -1- m4_pattern_allow([^target_all$])
-+m4trace:configure.in:287: -1- m4_pattern_allow([^ECOS$])
-+m4trace:configure.in:298: -1- AM_CONDITIONAL([CPLUSPLUS], [test "${enable_cplusplus}" = yes])
-+m4trace:configure.in:298: -1- m4_pattern_allow([^CPLUSPLUS_TRUE$])
-+m4trace:configure.in:298: -1- m4_pattern_allow([^CPLUSPLUS_FALSE$])
-+m4trace:configure.in:298: -1- _AM_SUBST_NOTMAKE([CPLUSPLUS_TRUE])
-+m4trace:configure.in:298: -1- _AM_SUBST_NOTMAKE([CPLUSPLUS_FALSE])
-+m4trace:configure.in:300: -1- m4_pattern_allow([^CXX$])
-+m4trace:configure.in:302: -1- m4_pattern_allow([^INCLUDES$])
-+m4trace:configure.in:303: -1- m4_pattern_allow([^CXXINCLUDES$])
-+m4trace:configure.in:308: -1- AC_ENABLE_SHARED
-+m4trace:configure.in:308: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from...
-+/usr/share/aclocal/libtool.m4:2043: AC_ENABLE_SHARED is expanded from...
-+configure.in:308: the top level])
-+m4trace:configure.in:335: -1- m4_pattern_allow([^SOLARIS25_PROC_VDB_BUG_FIXED$])
-+m4trace:configure.in:339: -1- m4_pattern_allow([^STACKBASE$])
-+m4trace:configure.in:340: -1- m4_pattern_allow([^DATASTART_IS_ETEXT$])
-+m4trace:configure.in:351: -1- m4_pattern_allow([^NO_EXECUTE_PERMISSION$])
-+m4trace:configure.in:358: -1- m4_pattern_allow([^SUNOS53_SHARED_LIB$])
-+m4trace:configure.in:372: -1- m4_pattern_allow([^addobjs$])
-+m4trace:configure.in:373: -1- m4_pattern_allow([^addincludes$])
-+m4trace:configure.in:374: -1- m4_pattern_allow([^addlibs$])
-+m4trace:configure.in:375: -1- m4_pattern_allow([^addtests$])
-+m4trace:configure.in:377: -1- AC_PROG_LIBTOOL
-+m4trace:configure.in:377: -1- _AC_PROG_LIBTOOL
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SETUP
-+m4trace:configure.in:377: -1- AC_ENABLE_STATIC
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from...
-+/usr/share/aclocal/libtool.m4:2082: AC_ENABLE_STATIC is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AC_ENABLE_FAST_INSTALL
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from...
-+/usr/share/aclocal/libtool.m4:2121: AC_ENABLE_FAST_INSTALL is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AC_PROG_LD
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1382: AC_ARG_WITH is expanded from...
-+/usr/share/aclocal/libtool.m4:2262: AC_PROG_LD is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- LT_AC_PROG_SED
-+m4trace:configure.in:377: -1- m4_pattern_allow([^SED$])
-+m4trace:configure.in:377: -1- AC_PROG_LD_GNU
-+m4trace:configure.in:377: -1- AC_PROG_EGREP
-+m4trace:configure.in:377: -1- m4_pattern_allow([^GREP$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^GREP$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^EGREP$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^EGREP$])
-+m4trace:configure.in:377: -1- AC_PROG_LD_RELOAD_FLAG
-+m4trace:configure.in:377: -1- AC_PROG_NM
-+m4trace:configure.in:377: -1- m4_pattern_allow([^LN_S$])
-+m4trace:configure.in:377: -1- AC_DEPLIBS_CHECK_METHOD
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_MAX_CMD_LEN
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_OBJDIR
-+m4trace:configure.in:377: -1- _LT_AC_SYS_COMPILER
-+m4trace:configure.in:377: -1- _LT_AC_PROG_ECHO_BACKSLASH
-+m4trace:configure.in:377: -1- _LT_AC_SHELL_INIT([
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+ # Remove one level of quotation (which was required for Make).
-+ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-+ ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X[$]1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+elif test "X[$]1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+ # Yippee, $echo works!
-+ :
-+else
-+ # Restart under the correct shell.
-+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-+fi
-+
-+if test "X[$]1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+[$]*
-+EOF
-+ exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-+ echo_test_string=`eval $cmd` &&
-+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+ then
-+ break
-+ fi
-+ done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ :
-+else
-+ # The Solaris, AIX, and Digital Unix default echo programs unquote
-+ # backslashes. This makes it impossible to quote backslashes using
-+ # echo "$something" | sed 's/\\/\\\\/g'
-+ #
-+ # So, first we look for a working echo in the user's PATH.
-+
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for dir in $PATH /usr/ucb; do
-+ IFS="$lt_save_ifs"
-+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$dir/echo"
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ if test "X$echo" = Xecho; then
-+ # We didn't find a better echo, so look for alternatives.
-+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # This shell has a builtin print -r that does the trick.
-+ echo='print -r'
-+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+ test "X$CONFIG_SHELL" != X/bin/ksh; then
-+ # If we have ksh, try running configure again with it.
-+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+ export ORIGINAL_CONFIG_SHELL
-+ CONFIG_SHELL=/bin/ksh
-+ export CONFIG_SHELL
-+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-+ else
-+ # Try using printf.
-+ echo='printf %s\n'
-+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # Cool, printf works
-+ :
-+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+ export CONFIG_SHELL
-+ SHELL="$CONFIG_SHELL"
-+ export SHELL
-+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
-+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
-+ else
-+ # maybe with a smaller string...
-+ prev=:
-+
-+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+ then
-+ break
-+ fi
-+ prev="$cmd"
-+ done
-+
-+ if test "$prev" != 'sed 50q "[$]0"'; then
-+ echo_test_string=`eval $prev`
-+ export echo_test_string
-+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-+ else
-+ # Oops. We lost completely, so just stick with echo.
-+ echo=echo
-+ fi
-+ fi
-+ fi
-+ fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-+ ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-+fi
-+
-+AC_SUBST(ECHO)
-+])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^ECHO$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^AR$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^RANLIB$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^STRIP$])
-+m4trace:configure.in:377: -1- _LT_CC_BASENAME([$compiler])
-+m4trace:configure.in:377: -1- AC_PATH_MAGIC
-+m4trace:configure.in:377: -1- AC_PATH_TOOL_PREFIX([${ac_tool_prefix}file], [/usr/bin$PATH_SEPARATOR$PATH])
-+m4trace:configure.in:377: -1- AC_PATH_TOOL_PREFIX([file], [/usr/bin$PATH_SEPARATOR$PATH])
-+m4trace:configure.in:377: -1- _LT_REQUIRED_DARWIN_CHECKS
-+m4trace:configure.in:377: -1- m4_pattern_allow([^DSYMUTIL$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^NMEDIT$])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1382: AC_ARG_WITH is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LANG_C_CONFIG
-+m4trace:configure.in:377: -1- _LT_AC_LANG_C_CONFIG
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([objext], [])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_COMPILER
-+m4trace:configure.in:377: -1- _LT_COMPILER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_LINKER_BOILERPLATE
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_COMPILER_NO_RTTI([])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], [lt_cv_prog_compiler_rtti_exceptions], [-fno-rtti -fno-exceptions], [], [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, )="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, ) -fno-rtti -fno-exceptions"])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_COMPILER_PIC([])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([lt_cv_prog_compiler_pic_works], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, ) works], [lt_cv_prog_compiler_pic_works], [$_LT_AC_TAGVAR(lt_prog_compiler_pic, )ifelse([],[],[ -DPIC],[ifelse([],[CXX],[ -DPIC],[])])], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, ) in
-+ "" | " "*) ;;
-+ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, )=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, )" ;;
-+ esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, )=
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, )=no])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([lt_cv_prog_compiler_static_works], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], [lt_cv_prog_compiler_static_works], [$lt_tmp_static_flag], [], [_LT_AC_TAGVAR(lt_prog_compiler_static, )=])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_CC_C_O([])
-+m4trace:configure.in:377: -3- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -3- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_HARD_LINK_LOCKS([])
-+m4trace:configure.in:377: -1- _LT_AC_LOCK
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from...
-+../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from...
-+../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from...
-+../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from...
-+/usr/share/aclocal/libtool.m4:551: _LT_AC_LOCK is expanded from...
-+/usr/share/aclocal/libtool.m4:1171: AC_LIBTOOL_SYS_HARD_LINK_LOCKS is expanded from...
-+/usr/share/aclocal/libtool.m4:2795: _LT_AC_LANG_C_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:2794: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_LD_SHLIBS([])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [])
-+m4trace:configure.in:377: -1- _LT_CC_BASENAME([$compiler])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_LIBPATH_AIX
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_LIBPATH_AIX
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([fix_srcfile_path], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([reload_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_DYNAMIC_LINKER([])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([runpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_LIB_STRIP
-+m4trace:configure.in:377: -1- AC_LIBTOOL_DLOPEN_SELF
-+m4trace:configure.in:377: -1- _LT_AC_CHECK_DLFCN
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CPP$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CPPFLAGS$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CPP$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^STDC_HEADERS$])
-+m4trace:configure.in:377: -1- _LT_AC_TRY_DLOPEN_SELF([lt_cv_dlopen_self=yes], [lt_cv_dlopen_self=yes], [lt_cv_dlopen_self=no], [lt_cv_dlopen_self=cross])
-+m4trace:configure.in:377: -1- _LT_AC_TRY_DLOPEN_SELF([lt_cv_dlopen_self_static=yes], [lt_cv_dlopen_self_static=yes], [lt_cv_dlopen_self_static=no], [lt_cv_dlopen_self_static=cross])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_CONFIG([])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([CC], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postinstall_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postuninstall_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([fix_srcfile_path], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([GCC], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [])
-+m4trace:configure.in:377: -1- _LT_AC_TAGCONFIG
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1382: AC_ARG_WITH is expanded from...
-+/usr/share/aclocal/libtool.m4:1920: _LT_AC_TAGCONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me:$LINENO: error: tag name \"$tagname\" already exists], [/usr/share/aclocal/libtool.m4:1920: _LT_AC_TAGCONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me: error: tag name \"$tagname\" already exists], [/usr/share/aclocal/libtool.m4:1920: _LT_AC_TAGCONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LANG_CXX_CONFIG
-+m4trace:configure.in:377: -1- _LT_AC_LANG_CXX_CONFIG([CXX])
-+m4trace:configure.in:377: -1- _LT_AC_PROG_CXXCPP
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CXXCPP$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CPPFLAGS$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CXXCPP$])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([objext], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_COMPILER
-+m4trace:configure.in:377: -1- _LT_COMPILER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_LINKER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [CXX])
-+m4trace:configure.in:377: -1- _LT_CC_BASENAME([$compiler])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [CXX])
-+m4trace:configure.in:377: -1- AC_PROG_LD
-+m4trace:configure.in:377: -1- AC_PROG_LD_GNU
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_LIBPATH_AIX
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_LIBPATH_AIX
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([GCC], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_POSTDEP_PREDEP([CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_COMPILER_PIC([CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([lt_cv_prog_compiler_pic_works], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, CXX) works], [lt_cv_prog_compiler_pic_works_CXX], [$_LT_AC_TAGVAR(lt_prog_compiler_pic, CXX)ifelse([CXX],[],[ -DPIC],[ifelse([CXX],[CXX],[ -DPIC],[])])], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, CXX) in
-+ "" | " "*) ;;
-+ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, CXX)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, CXX)" ;;
-+ esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, CXX)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, CXX)=no])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([lt_cv_prog_compiler_static_works], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], [lt_cv_prog_compiler_static_works_CXX], [$lt_tmp_static_flag], [], [_LT_AC_TAGVAR(lt_prog_compiler_static, CXX)=])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_CC_C_O([CXX])
-+m4trace:configure.in:377: -3- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -3- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_HARD_LINK_LOCKS([CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_LD_SHLIBS([CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_DYNAMIC_LINKER([CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([runpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_CONFIG([CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([CC], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postinstall_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postuninstall_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([fix_srcfile_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([GCC], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [CXX])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LANG_F77_CONFIG
-+m4trace:configure.in:377: -1- _LT_AC_LANG_F77_CONFIG([F77])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^F77$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^FFLAGS$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^LDFLAGS$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^LIBS$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^F77$])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^ac_ct_F77$])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([objext], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_COMPILER
-+m4trace:configure.in:377: -1- _LT_COMPILER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_LINKER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [F77])
-+m4trace:configure.in:377: -1- _LT_CC_BASENAME([$compiler])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([GCC], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_COMPILER_PIC([F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([lt_cv_prog_compiler_pic_works], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, F77) works], [lt_cv_prog_compiler_pic_works_F77], [$_LT_AC_TAGVAR(lt_prog_compiler_pic, F77)ifelse([F77],[],[ -DPIC],[ifelse([F77],[CXX],[ -DPIC],[])])], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, F77) in
-+ "" | " "*) ;;
-+ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, F77)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, F77)" ;;
-+ esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, F77)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, F77)=no])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([lt_cv_prog_compiler_static_works], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], [lt_cv_prog_compiler_static_works_F77], [$lt_tmp_static_flag], [], [_LT_AC_TAGVAR(lt_prog_compiler_static, F77)=])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_CC_C_O([F77])
-+m4trace:configure.in:377: -3- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -3- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_HARD_LINK_LOCKS([F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_LD_SHLIBS([F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [F77])
-+m4trace:configure.in:377: -1- _LT_CC_BASENAME([$compiler])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_LIBPATH_AIX
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_LIBPATH_AIX
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([fix_srcfile_path], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([reload_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_DYNAMIC_LINKER([F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([runpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_CONFIG([F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([CC], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postinstall_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postuninstall_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([fix_srcfile_path], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([GCC], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [F77])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [F77])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LANG_GCJ_CONFIG
-+m4trace:configure.in:377: -1- _LT_AC_LANG_GCJ_CONFIG([GCJ])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_LANG_SAVE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/lang.m4:167: AC_LANG_SAVE is expanded from...
-+/usr/share/aclocal/libtool.m4:4189: _LT_AC_LANG_GCJ_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:4188: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:1920: _LT_AC_TAGCONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([objext], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_COMPILER
-+m4trace:configure.in:377: -1- _LT_COMPILER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_LINKER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [GCJ])
-+m4trace:configure.in:377: -1- _LT_CC_BASENAME([$compiler])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_COMPILER_NO_RTTI([GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], [lt_cv_prog_compiler_rtti_exceptions], [-fno-rtti -fno-exceptions], [], [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, GCJ)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, GCJ) -fno-rtti -fno-exceptions"])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_COMPILER_PIC([GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([lt_cv_prog_compiler_pic_works], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, GCJ) works], [lt_cv_prog_compiler_pic_works_GCJ], [$_LT_AC_TAGVAR(lt_prog_compiler_pic, GCJ)ifelse([GCJ],[],[ -DPIC],[ifelse([GCJ],[CXX],[ -DPIC],[])])], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, GCJ) in
-+ "" | " "*) ;;
-+ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, GCJ)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, GCJ)" ;;
-+ esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, GCJ)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, GCJ)=no])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_can_build_shared], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([lt_cv_prog_compiler_static_works], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], [lt_cv_prog_compiler_static_works_GCJ], [$lt_tmp_static_flag], [], [_LT_AC_TAGVAR(lt_prog_compiler_static, GCJ)=])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_CC_C_O([GCJ])
-+m4trace:configure.in:377: -3- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -3- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_HARD_LINK_LOCKS([GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_LD_SHLIBS([GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [GCJ])
-+m4trace:configure.in:377: -1- _LT_CC_BASENAME([$compiler])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_LIBPATH_AIX
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_LIBPATH_AIX
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([fix_srcfile_path], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_From_new_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([reload_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([ld_shlibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -2- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_SYS_DYNAMIC_LINKER([GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([runpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [GCJ])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_CONFIG([GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([CC], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postinstall_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postuninstall_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([fix_srcfile_path], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([GCC], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [GCJ])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [GCJ])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_LANG_RESTORE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/lang.m4:176: AC_LANG_RESTORE is expanded from...
-+/usr/share/aclocal/libtool.m4:4189: _LT_AC_LANG_GCJ_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:4188: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:1920: _LT_AC_TAGCONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_LANG_RC_CONFIG
-+m4trace:configure.in:377: -1- _LT_AC_LANG_RC_CONFIG([RC])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_LANG_SAVE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/lang.m4:167: AC_LANG_SAVE is expanded from...
-+/usr/share/aclocal/libtool.m4:4249: _LT_AC_LANG_RC_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:4248: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:1920: _LT_AC_TAGCONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([objext], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_SYS_COMPILER
-+m4trace:configure.in:377: -1- _LT_COMPILER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_LINKER_BOILERPLATE
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [RC])
-+m4trace:configure.in:377: -1- _LT_CC_BASENAME([$compiler])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [RC])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_CONFIG([RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([CC], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postinstall_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postuninstall_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([fix_srcfile_path], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds_need_lc], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([enable_shared_with_static_runtimes], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([GCC], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([LD], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_wl], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_pic], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_cv_prog_compiler_c_o], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_static], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([lt_prog_compiler_no_builtin_flag], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_dynamic_flag_spec], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([whole_archive_flag_spec], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([thread_safe_flag_spec], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_new_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([old_archive_from_expsyms_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([archive_expsym_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([module_expsym_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predep_objects], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdep_objects], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([predeps], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([postdeps], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_dirs], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([compiler_lib_search_path], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([allow_undefined_flag], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([no_undefined_flag], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_action], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_flag_spec_ld], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_libdir_separator], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_direct], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_minus_L], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_shlibpath_var], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([hardcode_automatic], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([link_all_deplibs], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([always_export_symbols], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([export_symbols_cmds], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([exclude_expsyms], [RC])
-+m4trace:configure.in:377: -1- _LT_AC_TAGVAR([include_expsyms], [RC])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_LANG_RESTORE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/lang.m4:176: AC_LANG_RESTORE is expanded from...
-+/usr/share/aclocal/libtool.m4:4249: _LT_AC_LANG_RC_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:4248: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:1920: _LT_AC_TAGCONFIG is expanded from...
-+/usr/share/aclocal/libtool.m4:80: AC_LIBTOOL_SETUP is expanded from...
-+/usr/share/aclocal/libtool.m4:60: _AC_PROG_LIBTOOL is expanded from...
-+/usr/share/aclocal/libtool.m4:25: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^LIBTOOL$])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_CXX
-+m4trace:configure.in:377: -1- _LT_AC_LANG_CXX
-+m4trace:configure.in:377: -1- _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-+m4trace:configure.in:377: -1- AC_LIBTOOL_F77
-+m4trace:configure.in:377: -1- _LT_AC_LANG_F77
-+m4trace:configure.in:377: -1- _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-+m4trace:configure.in:395: -1- m4_pattern_allow([^CFLAGS$])
-+m4trace:configure.in:396: -1- m4_pattern_allow([^CXXFLAGS$])
-+m4trace:configure.in:448: -1- m4_pattern_allow([^MY_CFLAGS$])
-+m4trace:configure.in:452: -1- m4_pattern_allow([^SILENT$])
-+m4trace:configure.in:453: -1- m4_pattern_allow([^NO_SIGNALS$])
-+m4trace:configure.in:454: -1- m4_pattern_allow([^NO_EXECUTE_PERMISSION$])
-+m4trace:configure.in:458: -1- m4_pattern_allow([^JAVA_FINALIZATION$])
-+m4trace:configure.in:459: -1- m4_pattern_allow([^GC_GCJ_SUPPORT$])
-+m4trace:configure.in:460: -1- m4_pattern_allow([^ATOMIC_UNCOLLECTABLE$])
-+m4trace:configure.in:466: -1- m4_pattern_allow([^NO_SIGSET$])
-+m4trace:configure.in:467: -1- m4_pattern_allow([^NO_CLOCK$])
-+m4trace:configure.in:468: -1- m4_pattern_allow([^SMALL_CONFIG$])
-+m4trace:configure.in:469: -1- m4_pattern_allow([^NO_DEBUGGING$])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^KEEP_BACK_PTRS$])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^DBG_HDRS_ALL$])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^MAKE_BACK_GRAPH$])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^SAVE_CALL_COUNT$])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^GC_HAVE_BUILTIN_BACKTRACE$])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^MAKE_BACK_GRAPH$])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^SAVE_CALL_COUNT$])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^MAKE_BACK_GRAPH$])
-+m4trace:configure.in:500: -1- m4_pattern_allow([^UNWINDLIBS$])
-+m4trace:configure.in:507: -1- m4_pattern_allow([^REDIRECT_MALLOC$])
-+m4trace:configure.in:508: -1- m4_pattern_allow([^REDIRECT_REALLOC$])
-+m4trace:configure.in:509: -1- m4_pattern_allow([^REDIRECT_FREE$])
-+m4trace:configure.in:511: -1- m4_pattern_allow([^REDIRECT_MALLOC$])
-+m4trace:configure.in:515: -1- m4_pattern_allow([^_IN_LIBGC$])
-+m4trace:configure.in:520: -1- m4_pattern_allow([^GC_ASSERTIONS$])
-+m4trace:configure.in:523: -1- AM_CONDITIONAL([USE_LIBDIR], [test -z "$with_cross_host"])
-+m4trace:configure.in:523: -1- m4_pattern_allow([^USE_LIBDIR_TRUE$])
-+m4trace:configure.in:523: -1- m4_pattern_allow([^USE_LIBDIR_FALSE$])
-+m4trace:configure.in:523: -1- _AM_SUBST_NOTMAKE([USE_LIBDIR_TRUE])
-+m4trace:configure.in:523: -1- _AM_SUBST_NOTMAKE([USE_LIBDIR_FALSE])
-+m4trace:configure.in:531: -1- _m4_warn([obsolete], [AC_OUTPUT should be used without arguments.
-+You should run autoupdate.], [])
-+m4trace:configure.in:531: -1- m4_pattern_allow([^LIB@&t at OBJS$])
-+m4trace:configure.in:531: -1- m4_pattern_allow([^LTLIBOBJS$])
-+m4trace:configure.in:531: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS
-diff -urNad mono-2.0.1~/libgc/autom4te.cache/traces.1 mono-2.0.1/libgc/autom4te.cache/traces.1
---- mono-2.0.1~/libgc/autom4te.cache/traces.1 1970-01-01 01:00:00.000000000 +0100
-+++ mono-2.0.1/libgc/autom4te.cache/traces.1 2008-11-11 23:29:25.000000000 +0100
-@@ -0,0 +1,868 @@
-+m4trace:aclocal.m4:7572: -1- m4_include([acinclude.m4])
-+m4trace:configure.in:18: -1- AC_INIT([libgc-mono], [6.6], [Hans_Boehm at hp.com])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^_?A[CHUM]_])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([_AC_])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS'])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^AS_FLAGS$])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^_?m4_])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^dnl$])
-+m4trace:configure.in:18: -1- m4_pattern_forbid([^_?AS_])
-+m4trace:configure.in:18: -1- AC_SUBST([SHELL], [${CONFIG_SHELL-/bin/sh}])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([SHELL])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^SHELL$])
-+m4trace:configure.in:18: -1- AC_SUBST([PATH_SEPARATOR])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([PATH_SEPARATOR])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PATH_SEPARATOR$])
-+m4trace:configure.in:18: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([PACKAGE_NAME])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_NAME$])
-+m4trace:configure.in:18: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([PACKAGE_TARNAME])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
-+m4trace:configure.in:18: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([PACKAGE_VERSION])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_VERSION$])
-+m4trace:configure.in:18: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([PACKAGE_STRING])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_STRING$])
-+m4trace:configure.in:18: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
-+m4trace:configure.in:18: -1- AC_SUBST([exec_prefix], [NONE])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([exec_prefix])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^exec_prefix$])
-+m4trace:configure.in:18: -1- AC_SUBST([prefix], [NONE])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([prefix])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^prefix$])
-+m4trace:configure.in:18: -1- AC_SUBST([program_transform_name], [s,x,x,])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([program_transform_name])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^program_transform_name$])
-+m4trace:configure.in:18: -1- AC_SUBST([bindir], ['${exec_prefix}/bin'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([bindir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^bindir$])
-+m4trace:configure.in:18: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([sbindir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^sbindir$])
-+m4trace:configure.in:18: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([libexecdir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^libexecdir$])
-+m4trace:configure.in:18: -1- AC_SUBST([datarootdir], ['${prefix}/share'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([datarootdir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^datarootdir$])
-+m4trace:configure.in:18: -1- AC_SUBST([datadir], ['${datarootdir}'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([datadir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^datadir$])
-+m4trace:configure.in:18: -1- AC_SUBST([sysconfdir], ['${prefix}/etc'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([sysconfdir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^sysconfdir$])
-+m4trace:configure.in:18: -1- AC_SUBST([sharedstatedir], ['${prefix}/com'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([sharedstatedir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^sharedstatedir$])
-+m4trace:configure.in:18: -1- AC_SUBST([localstatedir], ['${prefix}/var'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([localstatedir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^localstatedir$])
-+m4trace:configure.in:18: -1- AC_SUBST([includedir], ['${prefix}/include'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([includedir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^includedir$])
-+m4trace:configure.in:18: -1- AC_SUBST([oldincludedir], ['/usr/include'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([oldincludedir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^oldincludedir$])
-+m4trace:configure.in:18: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME],
-+ ['${datarootdir}/doc/${PACKAGE_TARNAME}'],
-+ ['${datarootdir}/doc/${PACKAGE}'])])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([docdir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^docdir$])
-+m4trace:configure.in:18: -1- AC_SUBST([infodir], ['${datarootdir}/info'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([infodir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^infodir$])
-+m4trace:configure.in:18: -1- AC_SUBST([htmldir], ['${docdir}'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([htmldir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^htmldir$])
-+m4trace:configure.in:18: -1- AC_SUBST([dvidir], ['${docdir}'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([dvidir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^dvidir$])
-+m4trace:configure.in:18: -1- AC_SUBST([pdfdir], ['${docdir}'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([pdfdir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^pdfdir$])
-+m4trace:configure.in:18: -1- AC_SUBST([psdir], ['${docdir}'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([psdir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^psdir$])
-+m4trace:configure.in:18: -1- AC_SUBST([libdir], ['${exec_prefix}/lib'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([libdir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^libdir$])
-+m4trace:configure.in:18: -1- AC_SUBST([localedir], ['${datarootdir}/locale'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([localedir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^localedir$])
-+m4trace:configure.in:18: -1- AC_SUBST([mandir], ['${datarootdir}/man'])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([mandir])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^mandir$])
-+m4trace:configure.in:18: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_NAME$])
-+m4trace:configure.in:18: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
-+#undef PACKAGE_NAME])
-+m4trace:configure.in:18: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
-+m4trace:configure.in:18: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
-+#undef PACKAGE_TARNAME])
-+m4trace:configure.in:18: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_VERSION$])
-+m4trace:configure.in:18: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
-+#undef PACKAGE_VERSION])
-+m4trace:configure.in:18: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_STRING$])
-+m4trace:configure.in:18: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
-+#undef PACKAGE_STRING])
-+m4trace:configure.in:18: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
-+m4trace:configure.in:18: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
-+#undef PACKAGE_BUGREPORT])
-+m4trace:configure.in:18: -1- AC_SUBST([DEFS])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([DEFS])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^DEFS$])
-+m4trace:configure.in:18: -1- AC_SUBST([ECHO_C])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([ECHO_C])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^ECHO_C$])
-+m4trace:configure.in:18: -1- AC_SUBST([ECHO_N])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([ECHO_N])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^ECHO_N$])
-+m4trace:configure.in:18: -1- AC_SUBST([ECHO_T])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([ECHO_T])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^ECHO_T$])
-+m4trace:configure.in:18: -1- AC_SUBST([LIBS])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([LIBS])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^LIBS$])
-+m4trace:configure.in:18: -1- AC_SUBST([build_alias])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([build_alias])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^build_alias$])
-+m4trace:configure.in:18: -1- AC_SUBST([host_alias])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([host_alias])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^host_alias$])
-+m4trace:configure.in:18: -1- AC_SUBST([target_alias])
-+m4trace:configure.in:18: -1- AC_SUBST_TRACE([target_alias])
-+m4trace:configure.in:18: -1- m4_pattern_allow([^target_alias$])
-+m4trace:configure.in:20: -1- AM_INIT_AUTOMAKE([libgc-mono], [6.6], [no-define])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$])
-+m4trace:configure.in:20: -1- AM_AUTOMAKE_VERSION([1.10.1])
-+m4trace:configure.in:20: -1- AC_REQUIRE_AUX_FILE([install-sh])
-+m4trace:configure.in:20: -1- AC_SUBST([INSTALL_PROGRAM])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([INSTALL_PROGRAM])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
-+m4trace:configure.in:20: -1- AC_SUBST([INSTALL_SCRIPT])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([INSTALL_SCRIPT])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
-+m4trace:configure.in:20: -1- AC_SUBST([INSTALL_DATA])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([INSTALL_DATA])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^INSTALL_DATA$])
-+m4trace:configure.in:20: -1- AC_SUBST([am__isrc], [' -I$(srcdir)'])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([am__isrc])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^am__isrc$])
-+m4trace:configure.in:20: -1- _AM_SUBST_NOTMAKE([am__isrc])
-+m4trace:configure.in:20: -1- AC_SUBST([CYGPATH_W])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([CYGPATH_W])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^CYGPATH_W$])
-+m4trace:configure.in:20: -1- AC_SUBST([PACKAGE], [libgc-mono])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([PACKAGE])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^PACKAGE$])
-+m4trace:configure.in:20: -1- AC_SUBST([VERSION], [6.6])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([VERSION])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^VERSION$])
-+m4trace:configure.in:20: -1- AC_REQUIRE_AUX_FILE([missing])
-+m4trace:configure.in:20: -1- AC_SUBST([ACLOCAL])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([ACLOCAL])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^ACLOCAL$])
-+m4trace:configure.in:20: -1- AC_SUBST([AUTOCONF])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([AUTOCONF])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AUTOCONF$])
-+m4trace:configure.in:20: -1- AC_SUBST([AUTOMAKE])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([AUTOMAKE])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AUTOMAKE$])
-+m4trace:configure.in:20: -1- AC_SUBST([AUTOHEADER])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([AUTOHEADER])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AUTOHEADER$])
-+m4trace:configure.in:20: -1- AC_SUBST([MAKEINFO])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([MAKEINFO])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^MAKEINFO$])
-+m4trace:configure.in:20: -1- AC_SUBST([install_sh])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([install_sh])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^install_sh$])
-+m4trace:configure.in:20: -1- AC_SUBST([STRIP])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([STRIP])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^STRIP$])
-+m4trace:configure.in:20: -1- AC_SUBST([INSTALL_STRIP_PROGRAM])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([INSTALL_STRIP_PROGRAM])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$])
-+m4trace:configure.in:20: -1- AC_REQUIRE_AUX_FILE([install-sh])
-+m4trace:configure.in:20: -1- AC_SUBST([mkdir_p], ["$MKDIR_P"])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([mkdir_p])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^mkdir_p$])
-+m4trace:configure.in:20: -1- AC_SUBST([AWK])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([AWK])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AWK$])
-+m4trace:configure.in:20: -1- AC_SUBST([SET_MAKE])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([SET_MAKE])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^SET_MAKE$])
-+m4trace:configure.in:20: -1- AC_SUBST([am__leading_dot])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([am__leading_dot])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^am__leading_dot$])
-+m4trace:configure.in:20: -1- AC_SUBST([AMTAR])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([AMTAR])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^AMTAR$])
-+m4trace:configure.in:20: -1- AC_SUBST([am__tar])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([am__tar])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^am__tar$])
-+m4trace:configure.in:20: -1- AC_SUBST([am__untar])
-+m4trace:configure.in:20: -1- AC_SUBST_TRACE([am__untar])
-+m4trace:configure.in:20: -1- m4_pattern_allow([^am__untar$])
-+m4trace:configure.in:23: -1- AC_CANONICAL_HOST
-+m4trace:configure.in:23: -1- AC_CANONICAL_BUILD
-+m4trace:configure.in:23: -1- AC_REQUIRE_AUX_FILE([config.sub])
-+m4trace:configure.in:23: -1- AC_REQUIRE_AUX_FILE([config.guess])
-+m4trace:configure.in:23: -1- AC_SUBST([build], [$ac_cv_build])
-+m4trace:configure.in:23: -1- AC_SUBST_TRACE([build])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^build$])
-+m4trace:configure.in:23: -1- AC_SUBST([build_cpu], [$[1]])
-+m4trace:configure.in:23: -1- AC_SUBST_TRACE([build_cpu])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^build_cpu$])
-+m4trace:configure.in:23: -1- AC_SUBST([build_vendor], [$[2]])
-+m4trace:configure.in:23: -1- AC_SUBST_TRACE([build_vendor])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^build_vendor$])
-+m4trace:configure.in:23: -1- AC_SUBST([build_os])
-+m4trace:configure.in:23: -1- AC_SUBST_TRACE([build_os])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^build_os$])
-+m4trace:configure.in:23: -1- AC_SUBST([host], [$ac_cv_host])
-+m4trace:configure.in:23: -1- AC_SUBST_TRACE([host])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^host$])
-+m4trace:configure.in:23: -1- AC_SUBST([host_cpu], [$[1]])
-+m4trace:configure.in:23: -1- AC_SUBST_TRACE([host_cpu])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^host_cpu$])
-+m4trace:configure.in:23: -1- AC_SUBST([host_vendor], [$[2]])
-+m4trace:configure.in:23: -1- AC_SUBST_TRACE([host_vendor])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^host_vendor$])
-+m4trace:configure.in:23: -1- AC_SUBST([host_os])
-+m4trace:configure.in:23: -1- AC_SUBST_TRACE([host_os])
-+m4trace:configure.in:23: -1- m4_pattern_allow([^host_os$])
-+m4trace:configure.in:25: -1- AC_SUBST([PACKAGE])
-+m4trace:configure.in:25: -1- AC_SUBST_TRACE([PACKAGE])
-+m4trace:configure.in:25: -1- m4_pattern_allow([^PACKAGE$])
-+m4trace:configure.in:26: -1- AC_SUBST([GC_VERSION])
-+m4trace:configure.in:26: -1- AC_SUBST_TRACE([GC_VERSION])
-+m4trace:configure.in:26: -1- m4_pattern_allow([^GC_VERSION$])
-+m4trace:configure.in:28: -1- AC_SUBST([CC])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([CC])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- AC_SUBST([CFLAGS])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([CFLAGS])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CFLAGS$])
-+m4trace:configure.in:28: -1- AC_SUBST([LDFLAGS])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([LDFLAGS])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^LDFLAGS$])
-+m4trace:configure.in:28: -1- AC_SUBST([LIBS])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([LIBS])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^LIBS$])
-+m4trace:configure.in:28: -1- AC_SUBST([CPPFLAGS])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([CPPFLAGS])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CPPFLAGS$])
-+m4trace:configure.in:28: -1- AC_SUBST([CC])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([CC])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- AC_SUBST([CC])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([CC])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- AC_SUBST([CC])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([CC])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- AC_SUBST([CC])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([CC])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CC$])
-+m4trace:configure.in:28: -1- AC_SUBST([ac_ct_CC])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([ac_ct_CC])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^ac_ct_CC$])
-+m4trace:configure.in:28: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([EXEEXT])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^EXEEXT$])
-+m4trace:configure.in:28: -1- AC_SUBST([OBJEXT], [$ac_cv_objext])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([OBJEXT])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^OBJEXT$])
-+m4trace:configure.in:28: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([DEPDIR])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^DEPDIR$])
-+m4trace:configure.in:28: -1- AC_SUBST([am__include])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([am__include])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^am__include$])
-+m4trace:configure.in:28: -1- AC_SUBST([am__quote])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([am__quote])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^am__quote$])
-+m4trace:configure.in:28: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-+m4trace:configure.in:28: -1- AC_SUBST([AMDEP_TRUE])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([AMDEP_TRUE])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^AMDEP_TRUE$])
-+m4trace:configure.in:28: -1- AC_SUBST([AMDEP_FALSE])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([AMDEP_FALSE])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^AMDEP_FALSE$])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE])
-+m4trace:configure.in:28: -1- AC_SUBST([AMDEPBACKSLASH])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([AMDEPBACKSLASH])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^AMDEPBACKSLASH$])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])
-+m4trace:configure.in:28: -1- AC_SUBST([CCDEPMODE], [depmode=$am_cv_CC_dependencies_compiler_type])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([CCDEPMODE])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^CCDEPMODE$])
-+m4trace:configure.in:28: -1- AM_CONDITIONAL([am__fastdepCC], [
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3])
-+m4trace:configure.in:28: -1- AC_SUBST([am__fastdepCC_TRUE])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([am__fastdepCC_TRUE])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^am__fastdepCC_TRUE$])
-+m4trace:configure.in:28: -1- AC_SUBST([am__fastdepCC_FALSE])
-+m4trace:configure.in:28: -1- AC_SUBST_TRACE([am__fastdepCC_FALSE])
-+m4trace:configure.in:28: -1- m4_pattern_allow([^am__fastdepCC_FALSE$])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE])
-+m4trace:configure.in:28: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE])
-+m4trace:configure.in:29: -1- AC_SUBST([CXX])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([CXX])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CXX$])
-+m4trace:configure.in:29: -1- AC_SUBST([CXXFLAGS])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([CXXFLAGS])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CXXFLAGS$])
-+m4trace:configure.in:29: -1- AC_SUBST([LDFLAGS])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([LDFLAGS])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^LDFLAGS$])
-+m4trace:configure.in:29: -1- AC_SUBST([LIBS])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([LIBS])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^LIBS$])
-+m4trace:configure.in:29: -1- AC_SUBST([CPPFLAGS])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([CPPFLAGS])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CPPFLAGS$])
-+m4trace:configure.in:29: -1- AC_SUBST([CXX])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([CXX])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CXX$])
-+m4trace:configure.in:29: -1- AC_SUBST([ac_ct_CXX])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([ac_ct_CXX])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^ac_ct_CXX$])
-+m4trace:configure.in:29: -1- AC_SUBST([CXXDEPMODE], [depmode=$am_cv_CXX_dependencies_compiler_type])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([CXXDEPMODE])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^CXXDEPMODE$])
-+m4trace:configure.in:29: -1- AM_CONDITIONAL([am__fastdepCXX], [
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3])
-+m4trace:configure.in:29: -1- AC_SUBST([am__fastdepCXX_TRUE])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([am__fastdepCXX_TRUE])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^am__fastdepCXX_TRUE$])
-+m4trace:configure.in:29: -1- AC_SUBST([am__fastdepCXX_FALSE])
-+m4trace:configure.in:29: -1- AC_SUBST_TRACE([am__fastdepCXX_FALSE])
-+m4trace:configure.in:29: -1- m4_pattern_allow([^am__fastdepCXX_FALSE$])
-+m4trace:configure.in:29: -1- _AM_SUBST_NOTMAKE([am__fastdepCXX_TRUE])
-+m4trace:configure.in:29: -1- _AM_SUBST_NOTMAKE([am__fastdepCXX_FALSE])
-+m4trace:configure.in:32: -1- AC_SUBST([CCAS])
-+m4trace:configure.in:32: -1- AC_SUBST_TRACE([CCAS])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^CCAS$])
-+m4trace:configure.in:32: -1- AC_SUBST([CCASFLAGS])
-+m4trace:configure.in:32: -1- AC_SUBST_TRACE([CCASFLAGS])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^CCASFLAGS$])
-+m4trace:configure.in:32: -1- AC_SUBST([CCASDEPMODE], [depmode=$am_cv_CCAS_dependencies_compiler_type])
-+m4trace:configure.in:32: -1- AC_SUBST_TRACE([CCASDEPMODE])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^CCASDEPMODE$])
-+m4trace:configure.in:32: -1- AM_CONDITIONAL([am__fastdepCCAS], [
-+ test "x$enable_dependency_tracking" != xno \
-+ && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3])
-+m4trace:configure.in:32: -1- AC_SUBST([am__fastdepCCAS_TRUE])
-+m4trace:configure.in:32: -1- AC_SUBST_TRACE([am__fastdepCCAS_TRUE])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^am__fastdepCCAS_TRUE$])
-+m4trace:configure.in:32: -1- AC_SUBST([am__fastdepCCAS_FALSE])
-+m4trace:configure.in:32: -1- AC_SUBST_TRACE([am__fastdepCCAS_FALSE])
-+m4trace:configure.in:32: -1- m4_pattern_allow([^am__fastdepCCAS_FALSE$])
-+m4trace:configure.in:32: -1- _AM_SUBST_NOTMAKE([am__fastdepCCAS_TRUE])
-+m4trace:configure.in:32: -1- _AM_SUBST_NOTMAKE([am__fastdepCCAS_FALSE])
-+m4trace:configure.in:33: -1- AC_SUBST([AR])
-+m4trace:configure.in:33: -1- AC_SUBST_TRACE([AR])
-+m4trace:configure.in:33: -1- m4_pattern_allow([^AR$])
-+m4trace:configure.in:34: -1- AC_SUBST([RANLIB])
-+m4trace:configure.in:34: -1- AC_SUBST_TRACE([RANLIB])
-+m4trace:configure.in:34: -1- m4_pattern_allow([^RANLIB$])
-+m4trace:configure.in:36: -1- AC_REQUIRE_AUX_FILE([install-sh])
-+m4trace:configure.in:36: -1- AC_SUBST([INSTALL_PROGRAM])
-+m4trace:configure.in:36: -1- AC_SUBST_TRACE([INSTALL_PROGRAM])
-+m4trace:configure.in:36: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
-+m4trace:configure.in:36: -1- AC_SUBST([INSTALL_SCRIPT])
-+m4trace:configure.in:36: -1- AC_SUBST_TRACE([INSTALL_SCRIPT])
-+m4trace:configure.in:36: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
-+m4trace:configure.in:36: -1- AC_SUBST([INSTALL_DATA])
-+m4trace:configure.in:36: -1- AC_SUBST_TRACE([INSTALL_DATA])
-+m4trace:configure.in:36: -1- m4_pattern_allow([^INSTALL_DATA$])
-+m4trace:configure.in:38: -1- AM_MAINTAINER_MODE
-+m4trace:configure.in:38: -1- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
-+m4trace:configure.in:38: -1- AC_SUBST([MAINTAINER_MODE_TRUE])
-+m4trace:configure.in:38: -1- AC_SUBST_TRACE([MAINTAINER_MODE_TRUE])
-+m4trace:configure.in:38: -1- m4_pattern_allow([^MAINTAINER_MODE_TRUE$])
-+m4trace:configure.in:38: -1- AC_SUBST([MAINTAINER_MODE_FALSE])
-+m4trace:configure.in:38: -1- AC_SUBST_TRACE([MAINTAINER_MODE_FALSE])
-+m4trace:configure.in:38: -1- m4_pattern_allow([^MAINTAINER_MODE_FALSE$])
-+m4trace:configure.in:38: -1- _AM_SUBST_NOTMAKE([MAINTAINER_MODE_TRUE])
-+m4trace:configure.in:38: -1- _AM_SUBST_NOTMAKE([MAINTAINER_MODE_FALSE])
-+m4trace:configure.in:38: -1- AC_SUBST([MAINT])
-+m4trace:configure.in:38: -1- AC_SUBST_TRACE([MAINT])
-+m4trace:configure.in:38: -1- m4_pattern_allow([^MAINT$])
-+m4trace:configure.in:52: -1- AC_SUBST([GC_CFLAGS])
-+m4trace:configure.in:52: -1- AC_SUBST_TRACE([GC_CFLAGS])
-+m4trace:configure.in:52: -1- m4_pattern_allow([^GC_CFLAGS$])
-+m4trace:configure.in:90: -1- AC_DEFINE_TRACE_LITERAL([GC_LINUX_THREADS])
-+m4trace:configure.in:90: -1- m4_pattern_allow([^GC_LINUX_THREADS$])
-+m4trace:configure.in:91: -1- AC_DEFINE_TRACE_LITERAL([_REENTRANT])
-+m4trace:configure.in:91: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:93: -1- AC_DEFINE_TRACE_LITERAL([PARALLEL_MARK])
-+m4trace:configure.in:93: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:95: -1- AC_DEFINE_TRACE_LITERAL([THREAD_LOCAL_ALLOC])
-+m4trace:configure.in:95: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:98: -1- AC_DEFINE_TRACE_LITERAL([GC_LINUX_THREADS])
-+m4trace:configure.in:98: -1- m4_pattern_allow([^GC_LINUX_THREADS$])
-+m4trace:configure.in:99: -1- AC_DEFINE_TRACE_LITERAL([_REENTRANT])
-+m4trace:configure.in:99: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:102: -1- AC_DEFINE_TRACE_LITERAL([GC_AIX_THREADS])
-+m4trace:configure.in:102: -1- m4_pattern_allow([^GC_AIX_THREADS$])
-+m4trace:configure.in:103: -1- AC_DEFINE_TRACE_LITERAL([_REENTRANT])
-+m4trace:configure.in:103: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:107: -1- AC_DEFINE_TRACE_LITERAL([GC_HPUX_THREADS])
-+m4trace:configure.in:107: -1- m4_pattern_allow([^GC_HPUX_THREADS$])
-+m4trace:configure.in:108: -1- AC_DEFINE_TRACE_LITERAL([_POSIX_C_SOURCE])
-+m4trace:configure.in:108: -1- m4_pattern_allow([^_POSIX_C_SOURCE$])
-+m4trace:configure.in:110: -1- AC_DEFINE_TRACE_LITERAL([PARALLEL_MARK])
-+m4trace:configure.in:110: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:112: -1- AC_DEFINE_TRACE_LITERAL([THREAD_LOCAL_ALLOC])
-+m4trace:configure.in:112: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:116: -1- AC_DEFINE_TRACE_LITERAL([GC_FREEBSD_THREADS])
-+m4trace:configure.in:116: -1- m4_pattern_allow([^GC_FREEBSD_THREADS$])
-+m4trace:configure.in:119: -1- AC_DEFINE_TRACE_LITERAL([_REENTRANT])
-+m4trace:configure.in:119: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:121: -1- AC_DEFINE_TRACE_LITERAL([PARALLEL_MARK])
-+m4trace:configure.in:121: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:123: -1- AC_DEFINE_TRACE_LITERAL([THREAD_LOCAL_ALLOC])
-+m4trace:configure.in:123: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:124: -1- AC_DEFINE_TRACE_LITERAL([USE_COMPILER_TLS])
-+m4trace:configure.in:124: -1- m4_pattern_allow([^USE_COMPILER_TLS$])
-+m4trace:configure.in:128: -1- AC_DEFINE_TRACE_LITERAL([GC_FREEBSD_THREADS])
-+m4trace:configure.in:128: -1- m4_pattern_allow([^GC_FREEBSD_THREADS$])
-+m4trace:configure.in:142: -1- AC_DEFINE_TRACE_LITERAL([GC_FREEBSD_THREADS])
-+m4trace:configure.in:142: -1- m4_pattern_allow([^GC_FREEBSD_THREADS$])
-+m4trace:configure.in:147: -1- AC_DEFINE_TRACE_LITERAL([GC_FREEBSD_THREADS])
-+m4trace:configure.in:147: -1- m4_pattern_allow([^GC_FREEBSD_THREADS$])
-+m4trace:configure.in:158: -1- AC_DEFINE_TRACE_LITERAL([GC_SOLARIS_THREADS])
-+m4trace:configure.in:158: -1- m4_pattern_allow([^GC_SOLARIS_THREADS$])
-+m4trace:configure.in:159: -1- AC_DEFINE_TRACE_LITERAL([GC_SOLARIS_PTHREADS])
-+m4trace:configure.in:159: -1- m4_pattern_allow([^GC_SOLARIS_PTHREADS$])
-+m4trace:configure.in:162: -1- AC_DEFINE_TRACE_LITERAL([GC_IRIX_THREADS])
-+m4trace:configure.in:162: -1- m4_pattern_allow([^GC_IRIX_THREADS$])
-+m4trace:configure.in:165: -1- AC_DEFINE_TRACE_LITERAL([GC_WIN32_THREADS])
-+m4trace:configure.in:165: -1- m4_pattern_allow([^GC_WIN32_THREADS$])
-+m4trace:configure.in:168: -1- AC_DEFINE_TRACE_LITERAL([GC_DARWIN_THREADS])
-+m4trace:configure.in:168: -1- m4_pattern_allow([^GC_DARWIN_THREADS$])
-+m4trace:configure.in:169: -1- AC_DEFINE_TRACE_LITERAL([THREAD_LOCAL_ALLOC])
-+m4trace:configure.in:169: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:171: -1- AC_DEFINE_TRACE_LITERAL([PARALLEL_MARK])
-+m4trace:configure.in:171: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:175: -1- AC_DEFINE_TRACE_LITERAL([GC_NETBSD_THREADS])
-+m4trace:configure.in:175: -1- m4_pattern_allow([^GC_NETBSD_THREADS$])
-+m4trace:configure.in:177: -1- AC_DEFINE_TRACE_LITERAL([PARALLEL_MARK])
-+m4trace:configure.in:177: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:179: -1- AC_DEFINE_TRACE_LITERAL([THREAD_LOCAL_ALLOC])
-+m4trace:configure.in:179: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:182: -1- AC_DEFINE_TRACE_LITERAL([GC_OSF1_THREADS])
-+m4trace:configure.in:182: -1- m4_pattern_allow([^GC_OSF1_THREADS$])
-+m4trace:configure.in:184: -1- AC_DEFINE_TRACE_LITERAL([PARALLEL_MARK])
-+m4trace:configure.in:184: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:185: -1- AC_DEFINE_TRACE_LITERAL([THREAD_LOCAL_ALLOC])
-+m4trace:configure.in:185: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:198: -1- AC_DEFINE_TRACE_LITERAL([GC_WIN32_THREADS])
-+m4trace:configure.in:198: -1- m4_pattern_allow([^GC_WIN32_THREADS$])
-+m4trace:configure.in:200: -1- AC_DEFINE_TRACE_LITERAL([NO_GETENV])
-+m4trace:configure.in:200: -1- m4_pattern_allow([^NO_GETENV$])
-+m4trace:configure.in:202: -1- AC_DEFINE_TRACE_LITERAL([GC_INSIDE_DLL])
-+m4trace:configure.in:202: -1- m4_pattern_allow([^GC_INSIDE_DLL$])
-+m4trace:configure.in:211: -1- AC_DEFINE_TRACE_LITERAL([PARALLEL_MARK])
-+m4trace:configure.in:211: -1- m4_pattern_allow([^PARALLEL_MARK$])
-+m4trace:configure.in:213: -1- AC_DEFINE_TRACE_LITERAL([THREAD_LOCAL_ALLOC])
-+m4trace:configure.in:213: -1- m4_pattern_allow([^THREAD_LOCAL_ALLOC$])
-+m4trace:configure.in:214: -1- AC_DEFINE_TRACE_LITERAL([GC_DGUX386_THREADS])
-+m4trace:configure.in:214: -1- m4_pattern_allow([^GC_DGUX386_THREADS$])
-+m4trace:configure.in:215: -1- AC_DEFINE_TRACE_LITERAL([DGUX_THREADS])
-+m4trace:configure.in:215: -1- m4_pattern_allow([^DGUX_THREADS$])
-+m4trace:configure.in:222: -1- AC_DEFINE_TRACE_LITERAL([GC_AIX_THREADS])
-+m4trace:configure.in:222: -1- m4_pattern_allow([^GC_AIX_THREADS$])
-+m4trace:configure.in:223: -1- AC_DEFINE_TRACE_LITERAL([_REENTRANT])
-+m4trace:configure.in:223: -1- m4_pattern_allow([^_REENTRANT$])
-+m4trace:configure.in:232: -1- AC_SUBST([THREADDLLIBS])
-+m4trace:configure.in:232: -1- AC_SUBST_TRACE([THREADDLLIBS])
-+m4trace:configure.in:232: -1- m4_pattern_allow([^THREADDLLIBS$])
-+m4trace:configure.in:239: -1- AM_CONDITIONAL([POWERPC_DARWIN], [test x$powerpc_darwin = xtrue])
-+m4trace:configure.in:239: -1- AC_SUBST([POWERPC_DARWIN_TRUE])
-+m4trace:configure.in:239: -1- AC_SUBST_TRACE([POWERPC_DARWIN_TRUE])
-+m4trace:configure.in:239: -1- m4_pattern_allow([^POWERPC_DARWIN_TRUE$])
-+m4trace:configure.in:239: -1- AC_SUBST([POWERPC_DARWIN_FALSE])
-+m4trace:configure.in:239: -1- AC_SUBST_TRACE([POWERPC_DARWIN_FALSE])
-+m4trace:configure.in:239: -1- m4_pattern_allow([^POWERPC_DARWIN_FALSE$])
-+m4trace:configure.in:239: -1- _AM_SUBST_NOTMAKE([POWERPC_DARWIN_TRUE])
-+m4trace:configure.in:239: -1- _AM_SUBST_NOTMAKE([POWERPC_DARWIN_FALSE])
-+m4trace:configure.in:242: -1- _m4_warn([obsolete], [The macro `AC_TRY_COMPILE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:2367: AC_TRY_COMPILE is expanded from...
-+configure.in:242: the top level])
-+m4trace:configure.in:248: -1- AM_CONDITIONAL([COMPILER_XLC], [test $compiler_xlc = yes])
-+m4trace:configure.in:248: -1- AC_SUBST([COMPILER_XLC_TRUE])
-+m4trace:configure.in:248: -1- AC_SUBST_TRACE([COMPILER_XLC_TRUE])
-+m4trace:configure.in:248: -1- m4_pattern_allow([^COMPILER_XLC_TRUE$])
-+m4trace:configure.in:248: -1- AC_SUBST([COMPILER_XLC_FALSE])
-+m4trace:configure.in:248: -1- AC_SUBST_TRACE([COMPILER_XLC_FALSE])
-+m4trace:configure.in:248: -1- m4_pattern_allow([^COMPILER_XLC_FALSE$])
-+m4trace:configure.in:248: -1- _AM_SUBST_NOTMAKE([COMPILER_XLC_TRUE])
-+m4trace:configure.in:248: -1- _AM_SUBST_NOTMAKE([COMPILER_XLC_FALSE])
-+m4trace:configure.in:251: -1- AC_DEFINE_TRACE_LITERAL([DARWIN_DONT_PARSE_STACK])
-+m4trace:configure.in:251: -1- m4_pattern_allow([^DARWIN_DONT_PARSE_STACK$])
-+m4trace:configure.in:263: -1- AC_SUBST([EXTRA_TEST_LIBS])
-+m4trace:configure.in:263: -1- AC_SUBST_TRACE([EXTRA_TEST_LIBS])
-+m4trace:configure.in:263: -1- m4_pattern_allow([^EXTRA_TEST_LIBS$])
-+m4trace:configure.in:266: -1- AC_SUBST([target_all])
-+m4trace:configure.in:266: -1- AC_SUBST_TRACE([target_all])
-+m4trace:configure.in:266: -1- m4_pattern_allow([^target_all$])
-+m4trace:configure.in:287: -1- AC_DEFINE_TRACE_LITERAL([ECOS])
-+m4trace:configure.in:287: -1- m4_pattern_allow([^ECOS$])
-+m4trace:configure.in:298: -1- AM_CONDITIONAL([CPLUSPLUS], [test "${enable_cplusplus}" = yes])
-+m4trace:configure.in:298: -1- AC_SUBST([CPLUSPLUS_TRUE])
-+m4trace:configure.in:298: -1- AC_SUBST_TRACE([CPLUSPLUS_TRUE])
-+m4trace:configure.in:298: -1- m4_pattern_allow([^CPLUSPLUS_TRUE$])
-+m4trace:configure.in:298: -1- AC_SUBST([CPLUSPLUS_FALSE])
-+m4trace:configure.in:298: -1- AC_SUBST_TRACE([CPLUSPLUS_FALSE])
-+m4trace:configure.in:298: -1- m4_pattern_allow([^CPLUSPLUS_FALSE$])
-+m4trace:configure.in:298: -1- _AM_SUBST_NOTMAKE([CPLUSPLUS_TRUE])
-+m4trace:configure.in:298: -1- _AM_SUBST_NOTMAKE([CPLUSPLUS_FALSE])
-+m4trace:configure.in:300: -1- AC_SUBST([CXX])
-+m4trace:configure.in:300: -1- AC_SUBST_TRACE([CXX])
-+m4trace:configure.in:300: -1- m4_pattern_allow([^CXX$])
-+m4trace:configure.in:302: -1- AC_SUBST([INCLUDES])
-+m4trace:configure.in:302: -1- AC_SUBST_TRACE([INCLUDES])
-+m4trace:configure.in:302: -1- m4_pattern_allow([^INCLUDES$])
-+m4trace:configure.in:303: -1- AC_SUBST([CXXINCLUDES])
-+m4trace:configure.in:303: -1- AC_SUBST_TRACE([CXXINCLUDES])
-+m4trace:configure.in:303: -1- m4_pattern_allow([^CXXINCLUDES$])
-+m4trace:configure.in:308: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from...
-+aclocal.m4:2057: AC_ENABLE_SHARED is expanded from...
-+configure.in:308: the top level])
-+m4trace:configure.in:335: -1- AC_DEFINE_TRACE_LITERAL([SOLARIS25_PROC_VDB_BUG_FIXED])
-+m4trace:configure.in:335: -1- m4_pattern_allow([^SOLARIS25_PROC_VDB_BUG_FIXED$])
-+m4trace:configure.in:339: -1- AC_DEFINE_TRACE_LITERAL([STACKBASE])
-+m4trace:configure.in:339: -1- m4_pattern_allow([^STACKBASE$])
-+m4trace:configure.in:340: -1- AC_DEFINE_TRACE_LITERAL([DATASTART_IS_ETEXT])
-+m4trace:configure.in:340: -1- m4_pattern_allow([^DATASTART_IS_ETEXT$])
-+m4trace:configure.in:351: -1- AC_DEFINE_TRACE_LITERAL([NO_EXECUTE_PERMISSION])
-+m4trace:configure.in:351: -1- m4_pattern_allow([^NO_EXECUTE_PERMISSION$])
-+m4trace:configure.in:358: -1- AC_DEFINE_TRACE_LITERAL([SUNOS53_SHARED_LIB])
-+m4trace:configure.in:358: -1- m4_pattern_allow([^SUNOS53_SHARED_LIB$])
-+m4trace:configure.in:372: -1- AC_SUBST([addobjs])
-+m4trace:configure.in:372: -1- AC_SUBST_TRACE([addobjs])
-+m4trace:configure.in:372: -1- m4_pattern_allow([^addobjs$])
-+m4trace:configure.in:373: -1- AC_SUBST([addincludes])
-+m4trace:configure.in:373: -1- AC_SUBST_TRACE([addincludes])
-+m4trace:configure.in:373: -1- m4_pattern_allow([^addincludes$])
-+m4trace:configure.in:374: -1- AC_SUBST([addlibs])
-+m4trace:configure.in:374: -1- AC_SUBST_TRACE([addlibs])
-+m4trace:configure.in:374: -1- m4_pattern_allow([^addlibs$])
-+m4trace:configure.in:375: -1- AC_SUBST([addtests])
-+m4trace:configure.in:375: -1- AC_SUBST_TRACE([addtests])
-+m4trace:configure.in:375: -1- m4_pattern_allow([^addtests$])
-+m4trace:configure.in:377: -1- AC_PROG_LIBTOOL
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from...
-+aclocal.m4:2096: AC_ENABLE_STATIC is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from...
-+aclocal.m4:2135: AC_ENABLE_FAST_INSTALL is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1382: AC_ARG_WITH is expanded from...
-+aclocal.m4:2276: AC_PROG_LD is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AC_SUBST([SED])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([SED])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^SED$])
-+m4trace:configure.in:377: -1- AC_SUBST([GREP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([GREP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^GREP$])
-+m4trace:configure.in:377: -1- AC_SUBST([GREP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([GREP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^GREP$])
-+m4trace:configure.in:377: -1- AC_SUBST([EGREP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([EGREP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^EGREP$])
-+m4trace:configure.in:377: -1- AC_SUBST([EGREP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([EGREP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^EGREP$])
-+m4trace:configure.in:377: -1- AC_SUBST([LN_S], [$as_ln_s])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([LN_S])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^LN_S$])
-+m4trace:configure.in:377: -1- AC_SUBST([ECHO])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([ECHO])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^ECHO$])
-+m4trace:configure.in:377: -1- AC_SUBST([AR])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([AR])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^AR$])
-+m4trace:configure.in:377: -1- AC_SUBST([RANLIB])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([RANLIB])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^RANLIB$])
-+m4trace:configure.in:377: -1- AC_SUBST([STRIP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([STRIP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^STRIP$])
-+m4trace:configure.in:377: -1- AC_SUBST([DSYMUTIL])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([DSYMUTIL])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^DSYMUTIL$])
-+m4trace:configure.in:377: -1- AC_SUBST([NMEDIT])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([NMEDIT])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^NMEDIT$])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1364: AC_ARG_ENABLE is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1382: AC_ARG_WITH is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:2414: AC_TRY_LINK is expanded from...
-+../../lib/m4sugar/m4sh.m4:516: AS_IF is expanded from...
-+../../lib/autoconf/general.m4:1898: AC_CACHE_VAL is expanded from...
-+../../lib/autoconf/general.m4:1911: AC_CACHE_CHECK is expanded from...
-+aclocal.m4:565: _LT_AC_LOCK is expanded from...
-+aclocal.m4:1185: AC_LIBTOOL_SYS_HARD_LINK_LOCKS is expanded from...
-+aclocal.m4:2809: _LT_AC_LANG_C_CONFIG is expanded from...
-+aclocal.m4:2808: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_DLFCN_H], [/* Define to 1 if you have the <dlfcn.h> header file. */
-+#undef HAVE_DLFCN_H])
-+m4trace:configure.in:377: -1- AC_SUBST([CPP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([CPP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CPP$])
-+m4trace:configure.in:377: -1- AC_SUBST([CPPFLAGS])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([CPPFLAGS])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CPPFLAGS$])
-+m4trace:configure.in:377: -1- AC_SUBST([CPP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([CPP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CPP$])
-+m4trace:configure.in:377: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^STDC_HEADERS$])
-+m4trace:configure.in:377: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */
-+#undef STDC_HEADERS])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/* Define to 1 if you have the <sys/types.h> header file. */
-+#undef HAVE_SYS_TYPES_H])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the <sys/stat.h> header file. */
-+#undef HAVE_SYS_STAT_H])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the <stdlib.h> header file. */
-+#undef HAVE_STDLIB_H])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the <string.h> header file. */
-+#undef HAVE_STRING_H])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_MEMORY_H], [/* Define to 1 if you have the <memory.h> header file. */
-+#undef HAVE_MEMORY_H])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
-+#undef HAVE_STRINGS_H])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/* Define to 1 if you have the <inttypes.h> header file. */
-+#undef HAVE_INTTYPES_H])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the <stdint.h> header file. */
-+#undef HAVE_STDINT_H])
-+m4trace:configure.in:377: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
-+#undef HAVE_UNISTD_H])
-+m4trace:configure.in:377: -1- _LT_AC_TAGCONFIG
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/general.m4:209: AC_HELP_STRING is expanded from...
-+../../lib/autoconf/general.m4:1382: AC_ARG_WITH is expanded from...
-+aclocal.m4:1934: _LT_AC_TAGCONFIG is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me:$LINENO: error: tag name \"$tagname\" already exists], [aclocal.m4:1934: _LT_AC_TAGCONFIG is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me: error: tag name \"$tagname\" already exists], [aclocal.m4:1934: _LT_AC_TAGCONFIG is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AC_SUBST([CXXCPP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([CXXCPP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CXXCPP$])
-+m4trace:configure.in:377: -1- AC_SUBST([CPPFLAGS])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([CPPFLAGS])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CPPFLAGS$])
-+m4trace:configure.in:377: -1- AC_SUBST([CXXCPP])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([CXXCPP])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^CXXCPP$])
-+m4trace:configure.in:377: -1- AC_SUBST([F77])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([F77])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^F77$])
-+m4trace:configure.in:377: -1- AC_SUBST([FFLAGS])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([FFLAGS])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^FFLAGS$])
-+m4trace:configure.in:377: -1- AC_SUBST([LDFLAGS])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([LDFLAGS])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^LDFLAGS$])
-+m4trace:configure.in:377: -1- AC_SUBST([LIBS])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([LIBS])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^LIBS$])
-+m4trace:configure.in:377: -1- AC_SUBST([F77])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([F77])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^F77$])
-+m4trace:configure.in:377: -1- AC_SUBST([ac_ct_F77])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([ac_ct_F77])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^ac_ct_F77$])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_LANG_SAVE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/lang.m4:167: AC_LANG_SAVE is expanded from...
-+aclocal.m4:4195: _LT_AC_LANG_GCJ_CONFIG is expanded from...
-+aclocal.m4:4194: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
-+aclocal.m4:1934: _LT_AC_TAGCONFIG is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_LANG_RESTORE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/lang.m4:176: AC_LANG_RESTORE is expanded from...
-+aclocal.m4:4195: _LT_AC_LANG_GCJ_CONFIG is expanded from...
-+aclocal.m4:4194: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
-+aclocal.m4:1934: _LT_AC_TAGCONFIG is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_LANG_SAVE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/lang.m4:167: AC_LANG_SAVE is expanded from...
-+aclocal.m4:4251: _LT_AC_LANG_RC_CONFIG is expanded from...
-+aclocal.m4:4250: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
-+aclocal.m4:1934: _LT_AC_TAGCONFIG is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- _m4_warn([obsolete], [The macro `AC_LANG_RESTORE' is obsolete.
-+You should run autoupdate.], [../../lib/autoconf/lang.m4:176: AC_LANG_RESTORE is expanded from...
-+aclocal.m4:4251: _LT_AC_LANG_RC_CONFIG is expanded from...
-+aclocal.m4:4250: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
-+aclocal.m4:1934: _LT_AC_TAGCONFIG is expanded from...
-+aclocal.m4:94: AC_LIBTOOL_SETUP is expanded from...
-+aclocal.m4:74: _AC_PROG_LIBTOOL is expanded from...
-+aclocal.m4:39: AC_PROG_LIBTOOL is expanded from...
-+configure.in:377: the top level])
-+m4trace:configure.in:377: -1- AC_SUBST([LIBTOOL])
-+m4trace:configure.in:377: -1- AC_SUBST_TRACE([LIBTOOL])
-+m4trace:configure.in:377: -1- m4_pattern_allow([^LIBTOOL$])
-+m4trace:configure.in:395: -1- AC_SUBST([CFLAGS])
-+m4trace:configure.in:395: -1- AC_SUBST_TRACE([CFLAGS])
-+m4trace:configure.in:395: -1- m4_pattern_allow([^CFLAGS$])
-+m4trace:configure.in:396: -1- AC_SUBST([CXXFLAGS])
-+m4trace:configure.in:396: -1- AC_SUBST_TRACE([CXXFLAGS])
-+m4trace:configure.in:396: -1- m4_pattern_allow([^CXXFLAGS$])
-+m4trace:configure.in:448: -1- AC_SUBST([MY_CFLAGS])
-+m4trace:configure.in:448: -1- AC_SUBST_TRACE([MY_CFLAGS])
-+m4trace:configure.in:448: -1- m4_pattern_allow([^MY_CFLAGS$])
-+m4trace:configure.in:452: -1- AC_DEFINE_TRACE_LITERAL([SILENT])
-+m4trace:configure.in:452: -1- m4_pattern_allow([^SILENT$])
-+m4trace:configure.in:453: -1- AC_DEFINE_TRACE_LITERAL([NO_SIGNALS])
-+m4trace:configure.in:453: -1- m4_pattern_allow([^NO_SIGNALS$])
-+m4trace:configure.in:454: -1- AC_DEFINE_TRACE_LITERAL([NO_EXECUTE_PERMISSION])
-+m4trace:configure.in:454: -1- m4_pattern_allow([^NO_EXECUTE_PERMISSION$])
-+m4trace:configure.in:458: -1- AC_DEFINE_TRACE_LITERAL([JAVA_FINALIZATION])
-+m4trace:configure.in:458: -1- m4_pattern_allow([^JAVA_FINALIZATION$])
-+m4trace:configure.in:459: -1- AC_DEFINE_TRACE_LITERAL([GC_GCJ_SUPPORT])
-+m4trace:configure.in:459: -1- m4_pattern_allow([^GC_GCJ_SUPPORT$])
-+m4trace:configure.in:460: -1- AC_DEFINE_TRACE_LITERAL([ATOMIC_UNCOLLECTABLE])
-+m4trace:configure.in:460: -1- m4_pattern_allow([^ATOMIC_UNCOLLECTABLE$])
-+m4trace:configure.in:466: -1- AC_DEFINE_TRACE_LITERAL([NO_SIGSET])
-+m4trace:configure.in:466: -1- m4_pattern_allow([^NO_SIGSET$])
-+m4trace:configure.in:467: -1- AC_DEFINE_TRACE_LITERAL([NO_CLOCK])
-+m4trace:configure.in:467: -1- m4_pattern_allow([^NO_CLOCK$])
-+m4trace:configure.in:468: -1- AC_DEFINE_TRACE_LITERAL([SMALL_CONFIG])
-+m4trace:configure.in:468: -1- m4_pattern_allow([^SMALL_CONFIG$])
-+m4trace:configure.in:469: -1- AC_DEFINE_TRACE_LITERAL([NO_DEBUGGING])
-+m4trace:configure.in:469: -1- m4_pattern_allow([^NO_DEBUGGING$])
-+m4trace:configure.in:473: -1- AC_DEFINE_TRACE_LITERAL([KEEP_BACK_PTRS])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^KEEP_BACK_PTRS$])
-+m4trace:configure.in:473: -1- AC_DEFINE_TRACE_LITERAL([DBG_HDRS_ALL])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^DBG_HDRS_ALL$])
-+m4trace:configure.in:473: -1- AC_DEFINE_TRACE_LITERAL([MAKE_BACK_GRAPH])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^MAKE_BACK_GRAPH$])
-+m4trace:configure.in:473: -1- AC_DEFINE_TRACE_LITERAL([SAVE_CALL_COUNT])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^SAVE_CALL_COUNT$])
-+m4trace:configure.in:473: -1- AC_DEFINE_TRACE_LITERAL([GC_HAVE_BUILTIN_BACKTRACE])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^GC_HAVE_BUILTIN_BACKTRACE$])
-+m4trace:configure.in:473: -1- AC_DEFINE_TRACE_LITERAL([MAKE_BACK_GRAPH])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^MAKE_BACK_GRAPH$])
-+m4trace:configure.in:473: -1- AC_DEFINE_TRACE_LITERAL([SAVE_CALL_COUNT])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^SAVE_CALL_COUNT$])
-+m4trace:configure.in:473: -1- AC_DEFINE_TRACE_LITERAL([MAKE_BACK_GRAPH])
-+m4trace:configure.in:473: -1- m4_pattern_allow([^MAKE_BACK_GRAPH$])
-+m4trace:configure.in:500: -1- AC_SUBST([UNWINDLIBS])
-+m4trace:configure.in:500: -1- AC_SUBST_TRACE([UNWINDLIBS])
-+m4trace:configure.in:500: -1- m4_pattern_allow([^UNWINDLIBS$])
-+m4trace:configure.in:507: -1- AC_DEFINE_TRACE_LITERAL([REDIRECT_MALLOC])
-+m4trace:configure.in:507: -1- m4_pattern_allow([^REDIRECT_MALLOC$])
-+m4trace:configure.in:508: -1- AC_DEFINE_TRACE_LITERAL([REDIRECT_REALLOC])
-+m4trace:configure.in:508: -1- m4_pattern_allow([^REDIRECT_REALLOC$])
-+m4trace:configure.in:509: -1- AC_DEFINE_TRACE_LITERAL([REDIRECT_FREE])
-+m4trace:configure.in:509: -1- m4_pattern_allow([^REDIRECT_FREE$])
-+m4trace:configure.in:511: -1- AC_DEFINE_TRACE_LITERAL([REDIRECT_MALLOC])
-+m4trace:configure.in:511: -1- m4_pattern_allow([^REDIRECT_MALLOC$])
-+m4trace:configure.in:515: -1- AC_DEFINE_TRACE_LITERAL([_IN_LIBGC])
-+m4trace:configure.in:515: -1- m4_pattern_allow([^_IN_LIBGC$])
-+m4trace:configure.in:520: -1- AC_DEFINE_TRACE_LITERAL([GC_ASSERTIONS])
-+m4trace:configure.in:520: -1- m4_pattern_allow([^GC_ASSERTIONS$])
-+m4trace:configure.in:523: -1- AM_CONDITIONAL([USE_LIBDIR], [test -z "$with_cross_host"])
-+m4trace:configure.in:523: -1- AC_SUBST([USE_LIBDIR_TRUE])
-+m4trace:configure.in:523: -1- AC_SUBST_TRACE([USE_LIBDIR_TRUE])
-+m4trace:configure.in:523: -1- m4_pattern_allow([^USE_LIBDIR_TRUE$])
-+m4trace:configure.in:523: -1- AC_SUBST([USE_LIBDIR_FALSE])
-+m4trace:configure.in:523: -1- AC_SUBST_TRACE([USE_LIBDIR_FALSE])
-+m4trace:configure.in:523: -1- m4_pattern_allow([^USE_LIBDIR_FALSE$])
-+m4trace:configure.in:523: -1- _AM_SUBST_NOTMAKE([USE_LIBDIR_TRUE])
-+m4trace:configure.in:523: -1- _AM_SUBST_NOTMAKE([USE_LIBDIR_FALSE])
-+m4trace:configure.in:531: -1- AC_CONFIG_FILES([Makefile
-+include/Makefile
-+include/private/Makefile
-+doc/Makefile])
-+m4trace:configure.in:531: -1- _m4_warn([obsolete], [AC_OUTPUT should be used without arguments.
-+You should run autoupdate.], [])
-+m4trace:configure.in:531: -1- AC_SUBST([LIB@&t at OBJS], [$ac_libobjs])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([LIB@&t at OBJS])
-+m4trace:configure.in:531: -1- m4_pattern_allow([^LIB@&t at OBJS$])
-+m4trace:configure.in:531: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([LTLIBOBJS])
-+m4trace:configure.in:531: -1- m4_pattern_allow([^LTLIBOBJS$])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([top_builddir])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([srcdir])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([abs_srcdir])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([top_srcdir])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([abs_top_srcdir])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([builddir])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([abs_builddir])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([abs_top_builddir])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([INSTALL])
-+m4trace:configure.in:531: -1- AC_SUBST_TRACE([MKDIR_P])
diff -urNad mono-2.0.1~/libgc/configure mono-2.0.1/libgc/configure
---- mono-2.0.1~/libgc/configure 2008-11-11 23:28:32.000000000 +0100
-+++ mono-2.0.1/libgc/configure 2008-11-11 23:29:26.000000000 +0100
+--- mono-2.0.1~/libgc/configure 2008-10-22 19:20:06.000000000 +0200
++++ mono-2.0.1/libgc/configure 2008-11-23 16:09:50.000000000 +0100
@@ -4637,6 +4637,32 @@
THREADDLLIBS="-lpthread -lrt"
Added: mono/trunk/debian/patches/armel_fix_configure_fpu_check.dpatch
===================================================================
--- mono/trunk/debian/patches/armel_fix_configure_fpu_check.dpatch (rev 0)
+++ mono/trunk/debian/patches/armel_fix_configure_fpu_check.dpatch 2008-11-23 15:42:26 UTC (rev 3797)
@@ -0,0 +1,67 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## armel_fix_configure_fpu_check.dpatch by Riku Voipio <riku.voipio at iki.fi>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: No description.
+
+ at DPATCH@
+diff -urNad mono-2.0.1~/configure mono-2.0.1/configure
+--- mono-2.0.1~/configure 2008-10-22 19:20:01.000000000 +0200
++++ mono-2.0.1/configure 2008-11-23 15:47:00.000000000 +0100
+@@ -1657,6 +1657,7 @@
+ --with-jit=yes,no If you want to build scripts that default to the JIT
+ --with-interp=yes,no If you want to build scripts that default to the interpreter
+ --with-x use the X Window System
++ --with-fpu=FPA,VFP,NONE Select fpu to use on arm
+ --with-preview=yes,no If you want to install the 2.0 FX preview
+ --with-moonlight=yes,no If you want to build the Moonlight 2.1 assemblies
+ --with-oprofile=no,<path> Enable oprofile support (defaults to NO)
+@@ -39096,7 +39097,7 @@
+ main ()
+ {
+
+- __asm__ ("ldfd f0, [r0]");
++ __asm__ ("ldfd f0, [r0]");
+
+ ;
+ return 0;
+@@ -39128,6 +39129,7 @@
+ fi
+
+ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ fi
+
+ { echo "$as_me:$LINENO: result: $fpu" >&5
+ echo "${ECHO_T}$fpu" >&6; }
+diff -urNad mono-2.0.1~/configure.in mono-2.0.1/configure.in
+--- mono-2.0.1~/configure.in 2008-10-20 19:29:46.000000000 +0200
++++ mono-2.0.1/configure.in 2008-11-23 16:08:54.000000000 +0100
+@@ -2059,15 +2059,24 @@
+ ])
+ fi
+
+-if test ${TARGET} = ARM && test x$cross_compiling = xno && test x$enable_mcs_build != xno; then
++AC_ARG_WITH(fpu, [ --with-fpu=FPA,VFP,NONE Select fpu to use on arm],[fpu=$withval])
++
++if test ${TARGET} = ARM; then
+ dnl ******************************************
+ dnl *** Check to see what FPU is available ***
+ dnl ******************************************
+ AC_MSG_CHECKING(which FPU to use)
+
+- AC_TRY_COMPILE([], [
+- __asm__ ("ldfd f0, [r0]");
+- ], fpu=FPA, fpu=NONE)
++ if test "x$fpu" = "x"; then
++
++ AC_TRY_COMPILE([], [
++ __asm__ ("ldfd f0, [r0]");
++ ], fpu=FPA, [
++ AC_TRY_COMPILE([], [
++ __asm__ ("fldd d0, [r0]");
++ ], fpu=VFP, fpu=NONE)
++ ])
++ fi
+
+ AC_MSG_RESULT($fpu)
+ CPPFLAGS="$CPPFLAGS -DARM_FPU_$fpu=1"
Property changes on: mono/trunk/debian/patches/armel_fix_configure_fpu_check.dpatch
___________________________________________________________________
Name: svn:executable
+ *
Modified: mono/trunk/debian/rules
===================================================================
--- mono/trunk/debian/rules 2008-11-23 14:31:08 UTC (rev 3796)
+++ mono/trunk/debian/rules 2008-11-23 15:42:26 UTC (rev 3797)
@@ -351,5 +351,14 @@
dh_md5sums -s
dh_builddeb -s
+get-orig-source:
+ [ -d ../tarballs ] || mkdir ../tarballs
+ uscan \
+ --force-download \
+ --download-version $(UPVERSION) \
+ --repack \
+ --rename \
+ --destdir ../tarballs
+
.PHONY: clean build binary-indep binary-arch install binary patch unpatch
.NOTPARALLEL:
More information about the Pkg-mono-svn-commits
mailing list