Bug#675427: report

[Petr Grigoriev]

can i change description of error ? to
mii-tool: show wrong speed (ethtool show norm)
eth0 1000baseT-HD error (100Mb/s ok)

#mii-tool
eth0: negotiated 1000baseT-HD flow-control, link ok
eth1: negotiated 1000baseT-FD flow-control, link ok
eth2: negotiated 100baseTx-FD, link ok
eth3: negotiated 1000baseT-FD flow-control, link ok
eth4: negotiated 100baseTx-FD flow-control, link ok

#ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
        Link partner advertised pause frame use: No
        Link partner advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: d
        Wake-on: d
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes

#lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P AGP Bridge (rev 02)
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
02:00.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 02)
02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
02:02.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
02:03.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
02:04.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 01)

# dmesg | grep -i eth
[    3.045864] e100 0000:02:00.0: eth0: addr 0xfc000000, irq 21, MAC addr 00:60:94:a5:1e:df
[    3.046936] skge 0000:02:02.0: eth1: addr 00:17:9a:b3:95:8d
[    3.070853] skge 0000:02:04.0: eth3: addr 00:1c:f0:98:37:c3
[    3.097066] e100 0000:02:08.0: eth4: addr 0xff968000, irq 20, MAC addr 00:13:20:3d:7a:50
[   21.329036] i2c-core: driver [tuner] using legacy suspend method
[   21.329050] i2c-core: driver [tuner] using legacy resume method
[   24.002392] 8139too: 8139too Fast Ethernet driver 0.9.28
[   27.289917] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.292277] e100 0000:02:00.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[   27.292565] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.541254] skge 0000:02:02.0: eth1: enabling interface
[   27.795876] eth2:  setting full-duplex.
[   28.045712] skge 0000:02:04.0: eth3: enabling interface
[   28.285135] ADDRCONF(NETDEV_UP): eth4: link is not ready
[   28.288159] e100 0000:02:08.0: eth4: NIC Link is Up 100 Mbps Full Duplex
[   28.288420] ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
[   29.885987] skge 0000:02:02.0: eth1: Link is up at 1000 Mbps, full duplex, flow control both
[   30.427087] skge 0000:02:04.0: eth3: Link is up at 1000 Mbps, full duplex, flow control none
[   37.696011] eth0: no IPv6 routers present
[   37.864023] eth2: no IPv6 routers present
[   38.272023] eth1: no IPv6 routers present
[   38.608026] eth3: no IPv6 routers present
[   39.104023] eth4: no IPv6 routers present
[   64.843041] device eth1 entered promiscuous mode
[   64.857312] device eth2 entered promiscuous mode
[   64.861023] device eth0 entered promiscuous mode

# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:60:94:a5:1e:df
          inet addr:192.168.2.40  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::260:94ff:fea5:1edf/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1521677 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2121714 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:182353133 (173.9 MiB)  TX bytes:2352676461 (2.1 GiB)

-- 
Ñ óâà æåíèåì,
 Petr                          mailto:unicorp99 at hotbox.ru