[Pkg-octave-commit] [SCM] octave-symbolic branch, master, updated. a718b53403d9f164f8c2a3df521385a01d28a11b
hauberg
hauberg at 416fae20-06d0-4450-9b69-c6c34d4b5f03
Mon Jan 3 03:41:10 UTC 2011
The following commit has been merged in the master branch:
commit ac4239ff47700b52fe5568cf37874b8f46f3d4d2
Author: hauberg <hauberg at 416fae20-06d0-4450-9b69-c6c34d4b5f03>
Date: Fri Mar 21 19:12:49 2008 +0000
Simplify autotools stuff
git-svn-id: https://octave.svn.sourceforge.net/svnroot/octave/trunk/octave-forge/main/symbolic@4779 416fae20-06d0-4450-9b69-c6c34d4b5f03
diff --git a/src/Makeconf.in b/src/Makeconf.in
index a89f4e0..c74efd8 100644
--- a/src/Makeconf.in
+++ b/src/Makeconf.in
@@ -1,71 +1,5 @@
+MKOCTFILE = mkoctfile
+LIBS = -lginac -lcln -lgmp
-## Makeconf is automatically generated from Makeconf.base and Makeconf.add
-## in the various subdirectories. To regenerate, use ./autogen.sh to
-## create a new ./Makeconf.in, then use ./configure to generate a new
-## Makeconf.
-
-OCTAVE_FORGE = 1
-
-SHELL = @SHELL@
-
-canonical_host_type = @canonical_host_type@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-mandir = @mandir@
-libdir = @libdir@
-datadir = @datadir@
-infodir = @infodir@
-includedir = @includedir@
-datarootdir = @datarootdir@
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALLOCT=octinst.sh
-
-DESTDIR =
-
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-LN_S = @LN_S@
-
-AWK = @AWK@
-
-# Most octave programs will be compiled with $(MKOCTFILE). Those which
-# cannot use mkoctfile directly can request the flags that mkoctfile
-# would use as follows:
-# FLAG = $(shell $(MKOCTFILE) -p FLAG)
-# The following flags are for compiling programs that are independent
-# of Octave. How confusing.
-CC = @CC@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-CPICFLAG = @CPICFLAG@
-CXX = @CXX@
-CXXFLAGS = @CXXFLAGS@
-CXXPICFLAG = @CXXPICFLAG@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-FPICFLAG = @FPICFLAG@
-
-OCTAVE = @OCTAVE@
-OCTAVE_VERSION = @OCTAVE_VERSION@
-MKOCTFILE = @MKOCTFILE@ -DHAVE_OCTAVE_$(ver) -v
-SHLEXT = @SHLEXT@
-
-ver = @ver@
-MPATH = @mpath@
-OPATH = @opath@
-XPATH = @xpath@
-ALTMPATH = @altmpath@
-ALTOPATH = @altopath@
-
- at DEFHAVE_GINAC@
-GINAC_CFLAGS = @GINAC_CFLAGS@
-GINAC_LIBS = @GINAC_LIBS@
-
-%.o: %.c ; $(MKOCTFILE) -c $<
-%.o: %.f ; $(MKOCTFILE) -c $<
%.o: %.cc ; $(MKOCTFILE) -c $<
-%.oct: %.cc ; $(MKOCTFILE) $<
+%.oct: %.cc ; $(MKOCTFILE) $(LIBS) $<
diff --git a/src/configure.base b/src/configure.base
index 6642988..c4db95f 100644
--- a/src/configure.base
+++ b/src/configure.base
@@ -1,338 +1,10 @@
-dnl The configure script is generated by autogen.sh from configure.base
-dnl and the various configure.add files in the source tree. Edit
-dnl configure.base and reprocess rather than modifying ./configure.
-
dnl autoconf 2.13 certainly doesn't work! What is the minimum requirement?
AC_PREREQ(2.2)
AC_INIT(configure.base)
-
-PACKAGE=octave-forge
-MAJOR_VERSION=0
-MINOR_VERSION=1
-PATCH_LEVEL=0
-
-dnl Kill caching --- this ought to be the default
-define([AC_CACHE_LOAD], )dnl
-define([AC_CACHE_SAVE], )dnl
-
-dnl uncomment to put support files in another directory
-dnl AC_CONFIG_AUX_DIR(admin)
-
-VERSION=$MAJOR_VERSION.$MINOR_VERSION.$PATCH_LEVEL
-AC_SUBST(PACKAGE)
-AC_SUBST(VERSION)
-
-dnl need to find admin files, so keep track of the top dir.
-TOPDIR=`pwd`
-AC_SUBST(TOPDIR)
-
-dnl if mkoctfile doesn't work, then we need the following:
-dnl AC_PROG_CXX
-dnl AC_PROG_F77
-
-dnl Need C compiler regardless so define it in a way that
-dnl makes autoconf happy and we can override whatever we
-dnl need with mkoctfile -p.
-dnl XXX FIXME XXX should use mkoctfile to get CC and CFLAGS
-AC_PROG_CC
-
-dnl XXX FIXME XXX need tests for -p -c -s in mkoctfile.
-
-dnl *******************************************************************
-dnl Sort out mkoctfile version number and install paths
-
-dnl XXX FIXME XXX latest octave has octave-config so we don't
-dnl need to discover things here. Doesn't have --exe-site-dir
-dnl but defines --oct-site-dir and --m-site-dir
-
-dnl Check for mkoctfile
-AC_CHECK_PROG(MKOCTFILE,mkoctfile,mkoctfile)
-test -z "$MKOCTFILE" && AC_MSG_WARN([no mkoctfile found on path])
-
-AC_SUBST(ver)
-AC_SUBST(subver)
-AC_SUBST(mpath)
-AC_SUBST(opath)
-AC_SUBST(xpath)
-AC_SUBST(altpath)
-AC_SUBST(altmpath)
-AC_SUBST(altopath)
-
-AC_ARG_WITH(path,
- [ --with-path install path prefix],
- [ path=$withval ])
-AC_ARG_WITH(mpath,
- [ --with-mpath override path for m-files],
- [mpath=$withval])
-AC_ARG_WITH(opath,
- [ --with-opath override path for oct-files],
- [opath=$withval])
-AC_ARG_WITH(xpath,
- [ --with-xpath override path for executables],
- [xpath=$withval])
-AC_ARG_WITH(altpath,
- [ --with-altpath alternative functions install path prefix],
- [ altpath=$withval ])
-AC_ARG_WITH(altmpath,
- [ --with-altmpath override path for alternative m-files],
- [altmpath=$withval])
-AC_ARG_WITH(altopath,
- [ --with-altopath override path for alternative oct-files],
- [altopath=$withval])
-
-if test -n "$path" ; then
- test -z "$mpath" && mpath=$path
- test -z "$opath" && opath=$path/oct
- test -z "$xpath" && xpath=$path/bin
- test -z "$altpath" && altpath=$path-alternatives
-fi
-
-if test -n "$altpath" ; then
- test -z "$altmpath" && altmpath=$altpath
- test -z "$altopath" && altopath=$altpath/oct
-fi
-
-dnl Don't query if path/ver are given in the configure environment
-#if test -z "$mpath" || test -z "$opath" || test -z "$xpath" || test -z "$altmpath" || test -z "$altopath" || test -z "$ver" ; then
-if test -z "$mpath" || test -z "$opath" || test -z "$xpath" || test -z "$ver" ; then
- dnl Construct program to get mkoctfile version and local install paths
- cat > conftest.cc <<EOF
-#include <octave/config.h>
-#include <octave/version.h>
-#include <octave/defaults.h>
-
-#define INFOV "\nINFOV=" OCTAVE_VERSION "\n"
-
-#define INFOH "\nINFOH=" OCTAVE_CANONICAL_HOST_TYPE "\n"
-
-#ifdef OCTAVE_LOCALVERFCNFILEDIR
-# define INFOM "\nINFOM=" OCTAVE_LOCALVERFCNFILEDIR "\n"
-#else
-# define INFOM "\nINFOM=" OCTAVE_LOCALFCNFILEPATH "\n"
-#endif
-
-#ifdef OCTAVE_LOCALVEROCTFILEDIR
-# define INFOO "\nINFOO=" OCTAVE_LOCALVEROCTFILEDIR "\n"
-#else
-# define INFOO "\nINFOO=" OCTAVE_LOCALOCTFILEPATH "\n"
-#endif
-
-#ifdef OCTAVE_LOCALVERARCHLIBDIR
-# define INFOX "\nINFOX=" OCTAVE_LOCALVERARCHLIBDIR "\n"
-#else
-# define INFOX "\nINFOX=" OCTAVE_LOCALARCHLIBDIR "\n"
-#endif
-
-const char *infom = INFOM;
-const char *infoo = INFOO;
-const char *infox = INFOX;
-const char *infoh = INFOH;
-const char *infov = INFOV;
-EOF
-
- dnl Compile program perhaps with a special version of mkoctfile
- $MKOCTFILE conftest.cc || AC_MSG_ERROR(Could not run $MKOCTFILE)
-
- dnl Strip the config info from the compiled file
- eval `strings conftest.o | grep "^INFO.=" | sed -e "s,//.*$,,"`
- rm -rf conftest*
-
- dnl set the appropriate variables if they are not already set
- ver=`echo $INFOV | sed -e "s/\.//" -e "s/\..*$//"`
- subver=`echo $INFOV | sed -e "[s/^[^.]*[.][^.]*[.]//]"`
- alt_mbase=`echo $INFOM | sed -e "[s,\/[^\/]*$,,]"`
- alt_obase=`echo $INFOO | sed -e "[s,/site.*$,/site,]"`
- test -z "$mpath" && mpath=$INFOM/octave-forge
- test -z "$opath" && opath=$INFOO/octave-forge
- test -z "$xpath" && xpath=$INFOX
- test -z "$altmpath" && altmpath=$alt_mbase/octave-forge-alternatives/m
- test -z "$altopath" && altopath=$alt_obase/octave-forge-alternatives/oct/$INFOH
-fi
-
-dnl *******************************************************************
-
-dnl XXX FIXME XXX Should we allow the user to override these?
-dnl Do we even need them? The individual makefiles can call mkoctfile -p
-dnl themselves, so the only reason to keep them is for configure, and
-dnl for those things which are not built using mkoctfile (e.g., aurecord)
-dnl but it is not clear we should be using octave compile flags for those.
-
-dnl C compiler and flags
-AC_MSG_RESULT([retrieving compile and link flags from $MKOCTFILE])
-CC=`$MKOCTFILE -p CC`
-CFLAGS=`$MKOCTFILE -p CFLAGS`
-CPPFLAGS=`$MKOCTFILE -p CPPFLAGS`
-CPICFLAG=`$MKOCTFILE -p CPICFLAG`
-LDFLAGS=`$MKOCTFILE -p LDFLAGS`
-LIBS=`$MKOCTFILE -p LIBS`
-AC_SUBST(CC)
-AC_SUBST(CFLAGS)
-AC_SUBST(CPPFLAGS)
-AC_SUBST(CPICFLAG)
-
-dnl Fortran compiler and flags
-F77=`$MKOCTFILE -p F77`
-FFLAGS=`$MKOCTFILE -p FFLAGS`
-FPICFLAG=`$MKOCTFILE -p FPICFLAG`
-AC_SUBST(F77)
-AC_SUBST(FFLAGS)
-AC_SUBST(FPICFLAG)
-
-dnl C++ compiler and flags
-CXX=`$MKOCTFILE -p CXX`
-CXXFLAGS=`$MKOCTFILE -p CXXFLAGS`
-CXXPICFLAG=`$MKOCTFILE -p CXXPICFLAG`
-AC_SUBST(CXX)
-AC_SUBST(CXXFLAGS)
-AC_SUBST(CXXPICFLAG)
-
-dnl *******************************************************************
-
-dnl Check for features of your version of mkoctfile.
-dnl All checks should be designed so that the default
-dnl action if the tests are not performed is to do whatever
-dnl is appropriate for the most recent version of Octave.
-
-dnl Define the following macro:
-dnl OF_CHECK_LIB(lib,fn,true,false,helpers)
-dnl This is just like AC_CHECK_LIB, but it doesn't update LIBS
-AC_DEFUN([OF_CHECK_LIB],
-[save_LIBS="$LIBS"
-AC_CHECK_LIB($1,$2,$3,$4,$5)
-LIBS="$save_LIBS"
-])
-
-dnl Define the following macro:
-dnl TRY_MKOCTFILE(msg,program,action_if_true,action_if_false)
-dnl
-AC_DEFUN([TRY_MKOCTFILE],
-[AC_MSG_CHECKING($1)
-cat > conftest.cc << EOF
-#include <octave/config.h>
-$2
-EOF
-ac_try="$MKOCTFILE -c conftest.cc"
-if AC_TRY_EVAL(ac_try) ; then
- AC_MSG_RESULT(yes)
- $3
-else
- AC_MSG_RESULT(no)
- $4
-fi
-])
-
-dnl
-dnl Check if F77_FUNC works with MKOCTFILE
-dnl
-TRY_MKOCTFILE([for F77_FUNC],
-[int F77_FUNC (hello, HELLO) (const int &n);],,
-[MKOCTFILE="$MKOCTFILE -DF77_FUNC=F77_FCN"])
-
-dnl **********************************************************
-
-dnl Evaluate an expression in octave
-dnl
-dnl OCTAVE_EVAL(expr,var) -> var=expr
-dnl
-AC_DEFUN([OCTAVE_EVAL],
-[AC_MSG_CHECKING([for $1 in Octave])
-$2=`echo "disp($1)" | $OCTAVE -qf`
-AC_MSG_RESULT($$2)
-AC_SUBST($2)
-])
-
-dnl Check status of an octave variable
-dnl
-dnl OCTAVE_CHECK_EXIST(variable,action_if_true,action_if_false)
-dnl
-AC_DEFUN([OCTAVE_CHECK_EXIST],
-[AC_MSG_CHECKING([for $1 in Octave])
-if test `echo 'disp(exist("$1"))' | $OCTAVE -qf`X != 0X ; then
- AC_MSG_RESULT(yes)
- $2
-else
- AC_MSG_RESULT(no)
- $3
-fi
-])
-
-dnl should check that $(OCTAVE) --version matches $(MKOCTFILE) --version
-AC_CHECK_PROG(OCTAVE,octave,octave)
-OCTAVE_EVAL(OCTAVE_VERSION,OCTAVE_VERSION)
-
-dnl grab canonical host type so we can write system specific install stuff
-OCTAVE_EVAL(octave_config_info('canonical_host_type'),canonical_host_type)
-
-dnl grab SHLEXT from octave config
-OCTAVE_EVAL(octave_config_info('SHLEXT'),SHLEXT)
-
-AC_PROG_LN_S
-
-AC_PROG_RANLIB
-
-dnl Use $(COPY_FLAGS) to set options for cp when installing .oct files.
-COPY_FLAGS="-Rfp"
-case "$canonical_host_type" in
- *-*-linux*)
- COPY_FLAGS="-fdp"
- ;;
-esac
-AC_SUBST(COPY_FLAGS)
-
-dnl Use $(STRIP) in the makefile to strip executables. If not found,
-dnl STRIP expands to ':', which in the makefile does nothing.
-dnl Don't need this for .oct files since mkoctfile handles them directly
-STRIP=${STRIP-strip}
-AC_CHECK_PROG(STRIP,$STRIP,$STRIP,:)
-
-dnl Strip on windows, don't strip on Mac OS/X or IRIX
-dnl For the rest, you can force strip using MKOCTFILE="mkoctfile -s"
-dnl or avoid strip using STRIP=: before ./configure
-case "$canonical_host_type" in
- powerpc-apple-darwin*|*-sgi-*)
- STRIP=:
- ;;
- *-cygwin-*|*-mingw-*)
- MKOCTFILE="$MKOCTFILE -s"
- ;;
-esac
-
+
dnl Checking for ginac library
-AC_DEFINE(have_ginac)
-PKG_CHECK_MODULES(GINAC, ginac, [have_ginac=yes], [have_ginac=no])
-
-if test $have_ginac = no ; then
-
- dnl ginac doesn't exist: instruct the user how to install
- GINACSTATUS="GiNaC not found --- see main/symbolic/INSTALL"
-
-else
-
- dnl ginac exists: cheer
- GINACSTATUS=yes
- AC_SUBST(DEFHAVE_GINAC)
- DEFHAVE_GINAC="HAVE_GINAC=1"
-
-fi
-
-CONFIGURE_OUTPUTS="Makeconf"
-STATUS_MSG="
-octave commands will install into the following directories:
- m-files: $mpath
- oct-files: $opath
- binaries: $xpath
-alternatives:
- m-files: $altmpath
- oct-files: $altopath
-
-shell commands will install into the following directories:
- binaries: $bindir
- man pages: $mandir
- libraries: $libdir
- headers: $includedir
-
-octave-forge is configured with
- octave: $OCTAVE (version $OCTAVE_VERSION)
- mkoctfile: $MKOCTFILE for Octave $subver
- symbolic toolbox: $GINACSTATUS"
+PKG_CHECK_MODULES(GINAC, ginac, , [AC_MSG_ERROR([GINAC not found])])
+
+dnl Check for gmp library
+AC_CHECK_LIB(gmp, __gmpz_init, , [AC_MSG_ERROR([GNU MP not found])])
--
octave-symbolic
More information about the Pkg-octave-commit
mailing list