r1228 - in packages/libterm-readkey-perl/trunk: . debian
Gunnar Wolf
gwolf@costa.debian.org
Tue Jul 12 11:56:35 UTC 2005
Author: gwolf
Date: 2005-07-12 11:56:34 +0000 (Tue, 12 Jul 2005)
New Revision: 1228
Added:
packages/libterm-readkey-perl/trunk/debian/
packages/libterm-readkey-perl/trunk/debian/changelog
packages/libterm-readkey-perl/trunk/debian/control
packages/libterm-readkey-perl/trunk/debian/copyright
packages/libterm-readkey-perl/trunk/debian/rules
packages/libterm-readkey-perl/trunk/debian/watch
Log:
Load libterm-readkey-perl-2.21 into
packages/libterm-readkey-perl/trunk.
Added: packages/libterm-readkey-perl/trunk/debian/changelog
===================================================================
--- packages/libterm-readkey-perl/trunk/debian/changelog 2005-07-12 11:56:23 UTC (rev 1227)
+++ packages/libterm-readkey-perl/trunk/debian/changelog 2005-07-12 11:56:34 UTC (rev 1228)
@@ -0,0 +1,116 @@
+libterm-readkey-perl (2.21-1.3) unstable; urgency=low
+
+ * NMU for perl 5.8. Set build dependency to perl 5.8.
+
+ -- Josselin Mouette <joss@debian.org> Tue, 20 Aug 2002 17:24:42 +0200
+
+libterm-readkey-perl (2.21-1) unstable; urgency=low
+
+ * New upstream release
+
+ -- Joerg Jaspert <joerg@debian.org> Sat, 3 Aug 2002 19:03:55 +0200
+
+libterm-readkey-perl (2.20-1) unstable; urgency=low
+
+ * New upstream release
+
+ -- Joerg Jaspert <joerg@debian.org> Mon, 3 Jun 2002 16:18:52 +0200
+
+libterm-readkey-perl (2.19-2) unstable; urgency=low
+
+ * Changed my Email address
+ * termcap-compat is a libc5-package. We use libc6. My (small) test with
+ this modul dont show the problem from this bug.
+ So i think this (closes: #79642)
+ * Added debian/watch.
+
+ -- Joerg Jaspert <joerg@debian.org> Thu, 18 Apr 2002 21:49:22 +0200
+
+libterm-readkey-perl (2.19-1) unstable; urgency=low
+
+ * New Maintainer. (closes: #141229)
+ * Acknowledge of all the NMU Bugfixes
+ (closes: #94454, #70542, #80717, #93284, #91197, #91565)
+ * Updated debian/copyright.
+ * Reworked debian/rules to make more use of debhelper. Hope i dont
+ break anything with it.
+ * Removed postinst and postrm. We dont do anything special here.
+ * Removed Provides, Replaces and Conflicts for
+ libtermreadkey-perl. There is no package that uses this Package name
+ today. Keep Replaces for adbbs.
+ * Changed Standards-Version from 2.5.0 to 3.5.1
+
+ -- Joerg Jaspert (JJ) <joerg@goliathbbs.dnsalias.net> Sat, 6 Apr 2002 15:50:57 +0200
+
+libterm-readkey-perl (2.14-2.1) unstable; urgency=medium
+
+ * Yet Another NMU. No changes. Did that because there was a
+ sparc binary-only NMU 2.14-2 that caused it to not get
+ through testing.
+
+ -- Raphael Hertzog <hertzog@debian.org> Sat, 5 May 2001 13:05:23 +0200
+
+libterm-readkey-perl (2.14-1.2) unstable; urgency=low
+
+ * Another NMU.
+ * Built again and this time ReadKey.pm is included (don't know why it
+ wasn't included the previous time). Closes: #94454
+ * Fixed a call to find that was failing (but ignored).
+
+ -- Raphael Hertzog <hertzog@debian.org> Fri, 20 Apr 2001 19:50:07 +0200
+
+libterm-readkey-perl (2.14-1.1) unstable; urgency=low
+
+ * NMU.
+ * New build with latest perl. Closes: #70542, #80717
+ * Updated to latest perl policy.
+ * Uses dh_perl for the perl dependency (it's safer, cf bug).
+ Closes: #93284
+ * FHS transition stuff. Closes: #91197, #91565
+
+ -- Raphael Hertzog <hertzog@debian.org> Wed, 18 Apr 2001 17:30:09 +0200
+
+libterm-readkey-perl (2.14-1) unstable; urgency=low
+
+ * New Maintainer.
+ * New upstream version.
+ * Complies with Perl packaging standard 1.0.
+ * Completely rewrote debian/rules to how I do things.
+
+ -- Darren Stalder <torin@daft.com> Mon, 12 Jul 1999 02:35:37 -0700
+
+libterm-readkey-perl (2.12-2) unstable; urgency=low
+
+ * Debian changelog was missing
+
+ -- Kai Henningsen <kai@khms.westfalen.de> Fri, 18 Sep 1998 18:48:06 +0200
+
+libterm-readkey-perl (2.12-1) unstable; urgency=low
+
+ * New upstream version
+ * various lintian bugs fixed
+
+ -- Kai Henningsen <kai@khms.westfalen.de> Sun, 15 Mar 1998 11:49:53 +0100
+
+libterm-readkey-perl (2.09-2) unstable; urgency=low
+
+ * Changed stupid typo in debian/rules
+
+ -- Kai Henningsen <kai@khms.westfalen.de> Wed, 24 Dec 1997 17:17:35 +0100
+
+libterm-readkey-perl (2.09-1) unstable; urgency=low
+
+ * Changed name.
+
+ -- Kai Henningsen <kai@khms.westfalen.de> Wed, 24 Dec 1997 16:58:16 +0100
+
+libtermreadkey-perl (2.09-1) unstable; urgency=low
+
+ * installed changelog, fixes #6359 for this ex-part of adbbs
+ * no more perllocal.pod (fixes:Bug#8978)
+ * now linked with -lc (fixes:Bug#13537)
+ * Contents of debian/ shamelessly stolen from libnet (and adapted heavily)
+ * separated out from adbbs
+ * Initial Release.
+
+ -- Kai Henningsen <kai@khms.westfalen.de> Tue, 9 Dec 1997 00:21:58 +0100
Added: packages/libterm-readkey-perl/trunk/debian/control
===================================================================
--- packages/libterm-readkey-perl/trunk/debian/control 2005-07-12 11:56:23 UTC (rev 1227)
+++ packages/libterm-readkey-perl/trunk/debian/control 2005-07-12 11:56:34 UTC (rev 1228)
@@ -0,0 +1,18 @@
+Source: libterm-readkey-perl
+Section: interpreters
+Priority: optional
+Build-Depends: debhelper (>= 3.0.5), perl (>= 5.8.0-3)
+Maintainer: Joerg Jaspert <joerg@debian.org>
+Standards-Version: 3.5.1
+
+Package: libterm-readkey-perl
+Architecture: any
+Depends: ${perl:Depends}, ${shlibs:Depends}
+Replaces: adbbs
+Description: A perl module for simple terminal control
+ Term::ReadKey is a compiled perl module dedicated to providing simple
+ control over terminal driver modes (cbreak, raw, cooked, etc.,) support for
+ non-blocking reads, if the architecture allows, and some generalized handy
+ functions for working with terminals. One of the main goals is to have the
+ functions as portable as possible, so you can just plug in "use
+ Term::ReadKey" on any architecture and have a good likelyhood of it working.
Added: packages/libterm-readkey-perl/trunk/debian/copyright
===================================================================
--- packages/libterm-readkey-perl/trunk/debian/copyright 2005-07-12 11:56:23 UTC (rev 1227)
+++ packages/libterm-readkey-perl/trunk/debian/copyright 2005-07-12 11:56:34 UTC (rev 1228)
@@ -0,0 +1,20 @@
+This package was debianized by Joerg Jaspert (JJ) <joerg@goliathbbs.dnsalias.net> on
+Sat, 06 Apr 2002 15:00:00 +0200.
+
+The previous maintainers for this Package are:
+Darren Stalder <torin@daft.com>
+Kai Henningsen <kai@khms.westfalen.de>
+
+
+It was downloaded from http://www.cpan.org/authors/id/J/JS/JSTOWE
+
+
+The upstream author is: Jonathan Stowe <jns@gellyfish.com>.
+
+
+Copyright (C) 1994-1999 Kenneth Albanowski.
+ 2001,2002 Jonathan Stowe
+
+Unlimited distribution and/or modification is allowed as long as this
+copyright notice remains intact.
+
Added: packages/libterm-readkey-perl/trunk/debian/rules
===================================================================
--- packages/libterm-readkey-perl/trunk/debian/rules 2005-07-12 11:56:23 UTC (rev 1227)
+++ packages/libterm-readkey-perl/trunk/debian/rules 2005-07-12 11:56:34 UTC (rev 1228)
@@ -0,0 +1,93 @@
+#!/usr/bin/make -f
+#-*- makefile -*-
+
+#export DH_VERBOSE=1
+export DH_COMPAT=3
+
+PACKAGE=libterm-readkey-perl
+
+ifndef PERL
+PERL = /usr/bin/perl
+endif
+
+ifndef DESTDIR
+DESTDIR=..
+endif
+TMP =`pwd`/debian/$(PACKAGE)
+DOCDIR = $(TMP)/usr/share/doc/$(PACKAGE)
+
+OPTIMIZE = -O2 -Wall
+ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+OPTIMIZE += -g
+endif
+
+build: build-stamp
+build-stamp:
+ dh_testdir
+
+ # Add here commands to compile the package.
+ $(PERL) Makefile.PL INSTALLDIRS=vendor
+ $(MAKE) OPTIMIZE="$(OPTIMIZE)" LD_RUN_PATH=""
+# $(MAKE) all LDLOADLIBS=-lc LD_RUN_PATH="" CFLAG=$(CFLAGS)
+
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ # Add here commands to clean up after the build process.
+ -$(MAKE) realclean
+
+ dh_clean
+
+install:
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ # Add here commands to install the package into debian/tmp.
+ $(MAKE) install PREFIX=$(TMP)/usr
+
+ find debian/tmp \( -name '*.pm' -o -name '*.pl' \) -print0 | \
+ xargs --null --no-run-if-empty \
+ perl -i -pe '$$_ = "#!/usr/bin/perl$$1\n" if m|^#!.*/perl(.*)$$|;'
+
+ install -d $(DOCDIR)
+ perl -ne 'print if /\Q*****\E/ ... /\Q*****\E/' ReadKey.xs > $(DOCDIR)/changelog
+
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+# dh_testversion
+ dh_testdir
+ dh_testroot
+ dh_installdocs README
+# dh_installexamples
+# dh_installmenu
+ dh_installman
+ dh_installchangelogs
+ dh_link
+ dh_strip
+ dh_compress
+ dh_fixperms
+# dh_makeshlibs
+ dh_installdeb
+ dh_perl
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb --destdir=$(DESTDIR)
+
+source diff:
+ @echo >&2 'source and diff are obsolete - use dpkg-source -b'; false
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary
Property changes on: packages/libterm-readkey-perl/trunk/debian/rules
___________________________________________________________________
Name: svn:executable
+ *
Added: packages/libterm-readkey-perl/trunk/debian/watch
===================================================================
--- packages/libterm-readkey-perl/trunk/debian/watch 2005-07-12 11:56:23 UTC (rev 1227)
+++ packages/libterm-readkey-perl/trunk/debian/watch 2005-07-12 11:56:34 UTC (rev 1228)
@@ -0,0 +1,5 @@
+# Example watch control file for uscan
+# Rename this file to "watch" and then you can run the "uscan" command
+# to check for upstream updates and more.
+# Site Directory Pattern Version Script
+ftp.cpan.org /pub/CPAN/authors/id/J/JS/JSTOWE TermReadKey-(.*)\.tar\.gz debian uupdate
More information about the Pkg-perl-cvs-commits
mailing list