r9195 - in /trunk/libcompress-raw-zlib-perl: Changes META.yml README debian/changelog lib/Compress/Raw/Zlib.pm t/000prereq.t
gregoa-guest at users.alioth.debian.org
gregoa-guest at users.alioth.debian.org
Sun Nov 11 14:16:59 UTC 2007
Author: gregoa-guest
Date: Sun Nov 11 14:16:58 2007
New Revision: 9195
URL: http://svn.debian.org/wsvn/?sc=1&rev=9195
Log:
New upstream release.
Modified:
trunk/libcompress-raw-zlib-perl/Changes
trunk/libcompress-raw-zlib-perl/META.yml
trunk/libcompress-raw-zlib-perl/README
trunk/libcompress-raw-zlib-perl/debian/changelog
trunk/libcompress-raw-zlib-perl/lib/Compress/Raw/Zlib.pm
trunk/libcompress-raw-zlib-perl/t/000prereq.t
Modified: trunk/libcompress-raw-zlib-perl/Changes
URL: http://svn.debian.org/wsvn/trunk/libcompress-raw-zlib-perl/Changes?rev=9195&op=diff
==============================================================================
--- trunk/libcompress-raw-zlib-perl/Changes (original)
+++ trunk/libcompress-raw-zlib-perl/Changes Sun Nov 11 14:16:58 2007
@@ -1,5 +1,9 @@
CHANGES
-------
+
+ 2.008 2 November 2007
+
+ * Minor documentation changes in README
2.006 1 September 2007
Modified: trunk/libcompress-raw-zlib-perl/META.yml
URL: http://svn.debian.org/wsvn/trunk/libcompress-raw-zlib-perl/META.yml?rev=9195&op=diff
==============================================================================
--- trunk/libcompress-raw-zlib-perl/META.yml (original)
+++ trunk/libcompress-raw-zlib-perl/META.yml Sun Nov 11 14:16:58 2007
@@ -1,6 +1,6 @@
--- #YAML:1.0
name: Compress-Raw-Zlib
-version: 2.006
+version: 2.008
abstract: Low-Level Interface to zlib compression library
license: perl
generated_by: ExtUtils::MakeMaker version 6.36
Modified: trunk/libcompress-raw-zlib-perl/README
URL: http://svn.debian.org/wsvn/trunk/libcompress-raw-zlib-perl/README?rev=9195&op=diff
==============================================================================
--- trunk/libcompress-raw-zlib-perl/README (original)
+++ trunk/libcompress-raw-zlib-perl/README Sun Nov 11 14:16:58 2007
@@ -1,9 +1,9 @@
- Compress::Raw::Zlib
-
- Version 2.006
-
- 1st September 2007
+ Compress-Raw-Zlib
+
+ Version 2.008
+
+ 2nd November 2007
Copyright (c) 2005-2007 Paul Marquess. All rights reserved.
@@ -33,7 +33,7 @@
PREREQUISITES
-------------
-Before you can build Compress::Raw::Zlib you need to have the following
+Before you can build Compress-Raw-Zlib you need to have the following
installed on your system:
@@ -43,10 +43,10 @@
-By default, Compress::Raw::Zlib will build its own private copy of the
+By default, Compress-Raw-Zlib will build its own private copy of the
zlib library. If you want to use a different version of
zlib, follow the instructions in the section called
-"Controlling the version of zlib used by Compress::Raw::Zlib"
+"Controlling the version of zlib used by Compress-Raw-Zlib"
later in this document.
@@ -66,17 +66,17 @@
INSTALLATION
------------
-To install Compress::Raw::Zlib, run the command below:
+To install Compress-Raw-Zlib, run the command below:
make install
-Controlling the version of zlib used by Compress::Raw::Zlib
+Controlling the version of zlib used by Compress-Raw-Zlib
----------------------------------------------------------
-Compress::Raw::Zlib interfaces to the zlib compression library. There
+Compress-Raw-Zlib interfaces to the zlib compression library. There
are three options available to control which version/instance of the
zlib library is used:
@@ -120,7 +120,7 @@
--------
For option 2, fetch a copy of the zlib source distribution from
- http://www.zlib.org and unpack it into the Compress::Raw::Zlib source
+ http://www.zlib.org and unpack it into the Compress-Raw-Zlib source
directory. Assuming you have fetched zlib 1.2.3,
it will create a directory called zlib-1.2.3.
@@ -170,13 +170,13 @@
Every gzip stream stores a byte in its header to identify the Operating
System that was used to create the gzip stream. When you build
-Compress::Raw::Zlib it will attempt to determine the value that is correct for
+Compress-Raw-Zlib it will attempt to determine the value that is correct for
your Operating System. This will then be used by IO::Gzip as the default
value for the OS byte in all gzip headers it creates.
The variable GZIP_OS_CODE in the config.in file controls the setting of
-this value when building Compress::Raw::Zlib. If GZIP_OS_CODE is set to
-AUTO_DETECT, Compress::Raw::Zlib will attempt to determine the correct value for
+this value when building Compress-Raw-Zlib. If GZIP_OS_CODE is set to
+AUTO_DETECT, Compress-Raw-Zlib will attempt to determine the correct value for
your Operating System.
Alternatively, you can override auto-detection of the default OS code and
@@ -190,7 +190,7 @@
If you are running one of the less popular Operating Systems, it is
possible that the default value picked by this module is incorrect or the
default value (3) is used when there is a better value available. When
-Compress::Raw::Zlib cannot determine what operating system you are running, it
+Compress-Raw-Zlib cannot determine what operating system you are running, it
will use the default value 3 for the OS code.
If you find you have to change this value, because you think the value auto
@@ -281,7 +281,7 @@
HP-UX Notes
-----------
-I've had a report that when building Compress::Raw::Zlib under HP-UX that it
+I've had a report that when building Compress-Raw-Zlib under HP-UX that it
is necessary to have first built the zlib library with the -fpic
option.
@@ -314,8 +314,8 @@
-----------
If you are running Activestate Perl (from http://www.activestate.com),
-it ships with a pre-compiled version of Compress::Raw::Zlib. To check if a
-newer version of Compress::Raw::Zlib is available run this from the command
+it ships with a pre-compiled version of Compress-Raw-Zlib. To check if a
+newer version of Compress-Raw-Zlib is available run this from the command
prompt
C:\> ppm verify -upgrade Compress-Zlib
@@ -330,19 +330,19 @@
Win32 & Cygwin Notes
--------------------
-It is not possible to install Compress::Raw::Zlib using the CPAN shell.
-This is because the Compress::Raw::Zlib DLL is itself used by the CPAN shell
+It is not possible to install Compress-Raw-Zlib using the CPAN shell.
+This is because the Compress-Raw-Zlib DLL is itself used by the CPAN shell
and it is impossible to remove a DLL while it is already loaded under
Windows.
-The workaround is to install Compress::Raw::Zlib manually using the
+The workaround is to install Compress-Raw-Zlib manually using the
instructions given at the start of this file.
FEEDBACK
--------
-How to report a problem with Compress::Raw::Zlib.
+How to report a problem with Compress-Raw-Zlib.
To help me help you, I need all of the following information:
@@ -359,50 +359,34 @@
If your perl does not understand the "-V" option it is too
old. This module needs Perl version 5.004 or better.
- b. The version of Compress::Raw::Zlib you have.
- If you have successfully installed Compress::Raw::Zlib, this one-liner
+ b. The version of Compress-Raw-Zlib you have.
+ If you have successfully installed Compress-Raw-Zlib, this one-liner
will tell you:
perl -MCompress::Raw::Zlib -e 'print qq[ver $Compress::Raw::Zlib::VERSION\n]'
- If you areplete* output from running this
-
- perl -V
-
- Do not edit the output in any way.
- Note, I want you to run "perl -V" and NOT "perl -v".
-
- If your perl does not understand the "-V" option it is too
- old. This module needs Perl version 5.004 or better.
-
- b. The version of Compress::Raw::Zlib you have.
- If you have successfully installed Compress::Raw::Zlib, this one-liner
+ If you are running windows use this
+
+ perl -MCompress::Raw::Zlib -e "print qq[ver $Compress::Raw::Zlib::VERSION\n]"
+
+ If you haven't installed Compress-Raw-Zlib then search Compress::Raw::Zlib.pm
+ for a line like this:
+
+ $VERSION = "2.008" ;
+
+
+ c. The version of zlib you have used.
+ If you have successfully installed Compress-Raw-Zlib, this one-liner
will tell you:
- perl -MCompress::Raw::Zlib -e 'print qq[ver $Compress::Raw::Zlib::VERSION\n]'
-
- If you are running windows use this
-
- perl -MCompress::Raw::Zlib -e "print qq[ver $Compress::Raw::Zlib::VERSION\n]"
-
- If you haven't installed Compress::Raw::Zlib then search Compress::Raw::Zlib.pm
- for a line like this:
-
- $VERSION = "1.05" ;
-
-
- c. The version of zlib you have used.
- If you have successfully installed Compress::Raw::Zlib, this one-liner
- will tell you:
-
perl -MCompress::Raw::Zlib -e "print q[zlib ver ]. Compress::Raw::Zlib::ZLIB_VERSION.qq[\n]"
If not, look at the beginning of the file zlib.h.
- 2. If you are having problems building Compress::Raw::Zlib, send me a
- complete log of what happened. Start by unpacking the Compress::Raw::Zlib
+ 2. If you are having problems building Compress-Raw-Zlib, send me a
+ complete log of what happened. Start by unpacking the Compress-Raw-Zlib
module into a fresh directory and keep a log of all the steps
[edit config.in, if necessary]
Modified: trunk/libcompress-raw-zlib-perl/debian/changelog
URL: http://svn.debian.org/wsvn/trunk/libcompress-raw-zlib-perl/debian/changelog?rev=9195&op=diff
==============================================================================
--- trunk/libcompress-raw-zlib-perl/debian/changelog (original)
+++ trunk/libcompress-raw-zlib-perl/debian/changelog Sun Nov 11 14:16:58 2007
@@ -1,10 +1,11 @@
-libcompress-raw-zlib-perl (2.006-2) UNRELEASED; urgency=low
+libcompress-raw-zlib-perl (2.008-1) UNRELEASED; urgency=low
+ * New upstream release.
* debian/control: Added: Vcs-Svn field (source stanza); Vcs-Browser
field (source stanza); Homepage field (source stanza). Removed: XS-
Vcs-Svn fields.
- -- gregor herrmann <gregor+debian at comodo.priv.at> Tue, 09 Oct 2007 22:28:11 +0200
+ -- gregor herrmann <gregor+debian at comodo.priv.at> Sun, 11 Nov 2007 15:15:23 +0100
libcompress-raw-zlib-perl (2.006-1) unstable; urgency=low
Modified: trunk/libcompress-raw-zlib-perl/lib/Compress/Raw/Zlib.pm
URL: http://svn.debian.org/wsvn/trunk/libcompress-raw-zlib-perl/lib/Compress/Raw/Zlib.pm?rev=9195&op=diff
==============================================================================
--- trunk/libcompress-raw-zlib-perl/lib/Compress/Raw/Zlib.pm (original)
+++ trunk/libcompress-raw-zlib-perl/lib/Compress/Raw/Zlib.pm Sun Nov 11 14:16:58 2007
@@ -13,7 +13,7 @@
use bytes ;
our ($VERSION, $XS_VERSION, @ISA, @EXPORT, $AUTOLOAD);
-$VERSION = '2.006';
+$VERSION = '2.008';
$XS_VERSION = $VERSION;
$VERSION = eval $VERSION;
Modified: trunk/libcompress-raw-zlib-perl/t/000prereq.t
URL: http://svn.debian.org/wsvn/trunk/libcompress-raw-zlib-perl/t/000prereq.t?rev=9195&op=diff
==============================================================================
--- trunk/libcompress-raw-zlib-perl/t/000prereq.t (original)
+++ trunk/libcompress-raw-zlib-perl/t/000prereq.t Sun Nov 11 14:16:58 2007
@@ -19,7 +19,7 @@
if eval { require Test::NoWarnings ; import Test::NoWarnings; 1 };
- my $VERSION = '2.006';
+ my $VERSION = '2.008';
my @NAMES = qw(
);
More information about the Pkg-perl-cvs-commits
mailing list