[subversion-commit] SVN tetex commit + diffs: r428 - in
tex-common/trunk: debian scripts
Norbert Preining
preining-guest at costa.debian.org
Thu Dec 22 15:40:08 UTC 2005
Author: preining-guest
Date: 2005-12-22 15:40:07 +0000 (Thu, 22 Dec 2005)
New Revision: 428
Modified:
tex-common/trunk/debian/changelog
tex-common/trunk/scripts/postinst-texfonts
tex-common/trunk/scripts/postrm-texfonts
Log:
rework debhelper snippets
Modified: tex-common/trunk/debian/changelog
===================================================================
--- tex-common/trunk/debian/changelog 2005-12-22 14:51:35 UTC (rev 427)
+++ tex-common/trunk/debian/changelog 2005-12-22 15:40:07 UTC (rev 428)
@@ -4,8 +4,9 @@
* Move debiandoc-sgml from Build-Dep to Build-Dep-Indep
* Fix a couple of lintian errors and warnings
* Fix dvips config syntax, thanks to Danai SAE-HAN [preining]
+ * Rework the debhelper snippets post(inst|rm)-texfonts [preining]
- -- Norbert Preining <preining at logic.at> Thu, 22 Dec 2005 09:33:57 +0100
+ -- Norbert Preining <preining at logic.at> Thu, 22 Dec 2005 16:38:54 +0100
tex-common (0.13) unstable; urgency=low
Modified: tex-common/trunk/scripts/postinst-texfonts
===================================================================
--- tex-common/trunk/scripts/postinst-texfonts 2005-12-22 14:51:35 UTC (rev 427)
+++ tex-common/trunk/scripts/postinst-texfonts 2005-12-22 15:40:07 UTC (rev 428)
@@ -3,37 +3,57 @@
#
# postinst snippets for installing fonts for TeX
#
-# Author: Florent Rougon <f.rougon at free.fr>
+# Authors:
+# Florent Rougon <f.rougon at free.fr>
+# Norbert Preining <preining at logic.at>
#
# Please note that comments in this file are stripped before installation
# by calling a grep -v '^[ \t]*#'
# So please be careful if you add stuff here!
-update_fontmaps()
+update_lsr_files ()
{
- update-updmap --quiet
- # mktexlsr is recommended now because updmap-sys relies heavily on
- # Kpathsea to locate updmap.cfg and the map files. Also, it is slightly
- # better not to specify a particular directory to refresh because
- # updmap.cfg is typically found in $TEXMFSYSVAR while the map files are in
- # $TEXMFMAIN.
- # According to the Debian TeX policy, running mktexlsr and updmap-sys
- # should work as long as tex-common is configured and these files are
- # available (general Debian policy wouldn't assure that without this
- # override from the Debian TeX policy).
- if which mktexlsr >/dev/null; then mktexlsr; fi
- if which updmap-sys >/dev/null; then
- printf "Running updmap-sys... "
- updmap-sys --quiet
- echo "done."
+ tempfile=`mktemp -p /tmp mktexlsr.XXXXXXXX`
+ echo -n "Running mktexlsr. This may take some time. ..."
+ if mktexlsr > $tempfile 2>&1 ; then
+ rm -f $tempfile
+ echo " done."
+ else
+ echo
+ echo "mktexlsr failed. Output has been stored in"
+ echo "$tempfile"
+ echo "Please include this file if you report a bug."
+ echo
+ exit 1
fi
+}
- return 0
+create_fontmaps ()
+{
+ tempfile=`mktemp -p /tmp updmap.XXXXXXXX`
+ echo -n "Running updmap-sys. This may take some time. ..."
+ if updmap-sys > $tempfile 2>&1 ; then
+ rm -f $tempfile
+ echo " done."
+ else
+ echo
+ echo "updmap failed. Output has been stored in"
+ echo "$tempfile"
+ echo "Please include this file if you report a bug."
+ echo
+ exit 1
+ fi
}
case "$1" in
configure|abort-upgrade|abort-remove|abort-deconfigure)
- update_fontmaps
+ update-updmap
+ if which mktexlsr >/dev/null; then
+ update_lsr_files
+ fi
+ if which updmap-sys >/dev/null; then
+ create_fontmaps
+ fi
;;
*)
Modified: tex-common/trunk/scripts/postrm-texfonts
===================================================================
--- tex-common/trunk/scripts/postrm-texfonts 2005-12-22 14:51:35 UTC (rev 427)
+++ tex-common/trunk/scripts/postrm-texfonts 2005-12-22 15:40:07 UTC (rev 428)
@@ -3,35 +3,15 @@
#
# postrm snippets for installing fonts for TeX
#
-# Author: Florent Rougon <f.rougon at free.fr>
+# Authors:
+# Florent Rougon <f.rougon at free.fr>
+# Norbert Preining <preining at logic.at>
#
# Please note that comments in this file are stripped before installation
# by calling a grep -v '^[ \t]*#'
# So please be careful if you add stuff here!
-tell_that_errors_are_ok()
-{
- # Cheap option handling...
- if [ "$1" = -n ]; then
- prog="$2"
- endwith=' '
- else
- prog="$1"
- endwith='\n'
- fi
-
- # According to the Debian TeX policy, running mktexlsr and updmap-sys
- # should work as long as tex-common is configured and these files are
- # available (general Debian policy wouldn't assure that without this
- # override from the Debian TeX policy).
- printf "\
-Trying to run '$prog' (error messages can be ignored if tex-common
-is not configured)...$endwith"
-
- return 0
-}
-
-# The function name is *try_to*_update_fontmaps because the following
+# The function name is check_run_without_erros because the following
# scenario might happen:
# 1. this package is deconfigured
# 2. tex-common and tetex-bin are removed
@@ -40,54 +20,41 @@
# (cf. Policy § 6.5, step 2, about a conflicting package being removed due
# to the installation of the package being discussed).
#
-# In this case, update-updmap, mktexlsr and updmap-sys would all be gone once
-# tex-common and tetex-bin are removed, so we must append "|| true" to their
-# calls.
-try_to_update_fontmaps()
+check_run_without_errors ()
{
- # Don't print alarming error messages if the programs aren't even
- # available.
- if which update-updmap >/dev/null; then
- tell_that_errors_are_ok -n update-updmap
- update-updmap --quiet || true
- echo "done."
+ tempfile=`mktemp -p /tmp checkrun.XXXXXXXX`
+ if which $1 >/dev/null; then
+ echo -n "Running $*. This may take some time. ..."
+ set +e
+ if $* > $tempfile 2>&1 ; then
+ rm -f $tempfile
+ echo " done."
+ else
+ echo
+ echo "$* failed. Output has been stored in"
+ echo "$tempfile"
+ echo "If tex-common is not configured you can ignore this error message!"
+ echo "Otherwise please include this file if you report a bug."
+ echo
+ fi
+ set -e
+ else
+ rm -f $tempfile
fi
- # mktexlsr is recommended now because updmap-sys relies heavily on
- # Kpathsea to locate updmap.cfg and the map files. Also, it is slightly
- # better not to specify a particular directory to refresh because
- # updmap.cfg is typically found in $TEXMFSYSVAR while the map files are in
- # $TEXMFMAIN.
- if which mktexlsr >/dev/null; then
- tell_that_errors_are_ok mktexlsr
- mktexlsr || true
- echo "done."
- fi
-
- if which updmap-sys >/dev/null; then
- tell_that_errors_are_ok -n updmap-sys
- updmap-sys --quiet || true
- echo "done."
- fi
-
return 0
}
+
case "$1" in
remove|disappear)
- try_to_update_fontmaps
+ check_run_without_errors update-updmap
+ check_run_without_errors mktexlsr
+ check_run_without_errors updmap-sys
;;
- purge)
- # Supposing updmap.cfg & Co are clean (which I think is a reasonable
- # assumption), we don't need to call try_to_update_fontmaps().
- # Calling it on remove _and_ on purge just for hypothetical users
- # who would break their config before purging this package seems to
- # be more annoying than useful (it takes a lot of time).
+ purge|upgrade|failed-upgrade|abort-upgrade|abort-install)
;;
- upgrade|failed-upgrade|abort-upgrade|abort-install)
- ;;
-
*)
echo "postrm called with unknown argument \`$1'" >&2
exit 1
More information about the Pkg-tetex-commits
mailing list