[Pkg-uml-commit] r24 - in tags/src/user-mode-linux: . 2.6.15-1um-1
2.6.15-1um-1/debian
Mattia Dongili
malattia at costa.debian.org
Sat Mar 25 22:18:23 UTC 2006
Author: malattia
Date: 2006-03-25 18:01:07 +0000 (Sat, 25 Mar 2006)
New Revision: 24
Added:
tags/src/user-mode-linux/2.6.15-1um-1/
tags/src/user-mode-linux/2.6.15-1um-1/config
tags/src/user-mode-linux/2.6.15-1um-1/debian/README.Debian
tags/src/user-mode-linux/2.6.15-1um-1/debian/changelog
tags/src/user-mode-linux/2.6.15-1um-1/debian/control
tags/src/user-mode-linux/2.6.15-1um-1/debian/rules
tags/src/user-mode-linux/2.6.15-1um-1/linux.sgml
Removed:
tags/src/user-mode-linux/2.6.15-1um-1/config
tags/src/user-mode-linux/2.6.15-1um-1/debian/README.Debian
tags/src/user-mode-linux/2.6.15-1um-1/debian/changelog
tags/src/user-mode-linux/2.6.15-1um-1/debian/control
tags/src/user-mode-linux/2.6.15-1um-1/debian/rules
tags/src/user-mode-linux/2.6.15-1um-1/linux.sgml
Log:
tagging 2.6.15-1um-1
Copied: tags/src/user-mode-linux/2.6.15-1um-1 (from rev 22, trunk/src/user-mode-linux)
Deleted: tags/src/user-mode-linux/2.6.15-1um-1/config
===================================================================
--- trunk/src/user-mode-linux/config 2006-03-25 17:56:18 UTC (rev 22)
+++ tags/src/user-mode-linux/2.6.15-1um-1/config 2006-03-25 18:01:07 UTC (rev 24)
@@ -1,969 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Sat Jan 14 20:47:11 2006
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_UML=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQ_RELEASE_METHOD=y
-
-#
-# UML-specific options
-#
-CONFIG_MODE_TT=y
-CONFIG_MODE_SKAS=y
-CONFIG_UML_X86=y
-# CONFIG_64BIT is not set
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_TOP_ADDR=0xc0000000
-# CONFIG_3_LEVEL_PGTABLES is not set
-CONFIG_STUB_CODE=0xbfffe000
-CONFIG_STUB_DATA=0xbffff000
-CONFIG_STUB_START=0xbfffe000
-CONFIG_ARCH_HAS_SC_SIGNALS=y
-CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_LD_SCRIPT_STATIC=y
-CONFIG_NET=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_HOSTFS=y
-CONFIG_HPPFS=y
-CONFIG_MCONSOLE=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_HOST_2G_2G is not set
-# CONFIG_SMP is not set
-CONFIG_NEST_LEVEL=0
-CONFIG_KERNEL_HALF_GIGS=1
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_STACK_ORDER=2
-CONFIG_UML_REAL_TIME_CLOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Networking
-#
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_NETBIOS_NS=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-CONFIG_IP_NF_MATCH_DCCP=m
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DECnet: Netfilter Configuration
-#
-CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID3=m
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_IP_DCCP_UNLOAD_HACK is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_BAYCOM_SER_FDX=m
-CONFIG_BAYCOM_SER_HDX=m
-CONFIG_YAM=m
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-
-#
-# Old SIR device drivers
-#
-CONFIG_IRPORT_SIR=m
-
-#
-# Old Serial dongle support
-#
-# CONFIG_DONGLE_OLD is not set
-
-#
-# FIR device drivers
-#
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_BCSP_TXCRC is not set
-CONFIG_BT_HCIVHCI=m
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Character Devices
-#
-CONFIG_STDERR_CONSOLE=y
-CONFIG_STDIO_CONSOLE=y
-CONFIG_SSL=y
-CONFIG_NULL_CHAN=y
-CONFIG_PORT_CHAN=y
-CONFIG_PTY_CHAN=y
-CONFIG_TTY_CHAN=y
-CONFIG_XTERM_CHAN=y
-# CONFIG_NOCONFIG_CHAN is not set
-CONFIG_CON_ZERO_CHAN="fd:0,fd:1"
-CONFIG_CON_CHAN="xterm"
-CONFIG_SSL_CHAN="pty"
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_UML_WATCHDOG is not set
-# CONFIG_UML_SOUND is not set
-# CONFIG_SOUND is not set
-# CONFIG_HOSTAUDIO is not set
-# CONFIG_UML_RANDOM is not set
-CONFIG_MMAPPER=y
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_UBD=y
-CONFIG_BLK_DEV_UBD_SYNC=y
-CONFIG_BLK_DEV_COW_COMMON=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_LBD=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_NETDEVICES=y
-
-#
-# UML Network Devices
-#
-CONFIG_UML_NET=y
-CONFIG_UML_NET_ETHERTAP=y
-CONFIG_UML_NET_TUNTAP=y
-CONFIG_UML_NET_SLIP=y
-CONFIG_UML_NET_DAEMON=y
-CONFIG_UML_NET_MCAST=y
-# CONFIG_UML_NET_PCAP is not set
-CONFIG_UML_NET_SLIRP=y
-
-#
-# Network device support
-#
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-
-#
-# PHY device support
-#
-
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-CONFIG_SYNCLINK_SYNCPPP=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_RAW_ETH=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_HDLC_X25=y
-CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=y
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-
-#
-# ATM drivers
-#
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_ASFS_FS=m
-CONFIG_ASFS_DEFAULT_CODEPAGE=""
-# CONFIG_ASFS_RW is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_QNX4FS_RW is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_CUMANA=y
-# CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-# CONFIG_SECURITY_SECLVL is not set
-# CONFIG_SECURITY_SELINUX is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_AES_586=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-
-#
-# SCSI support
-#
-CONFIG_SCSI=m
-CONFIG_GENERIC_ISA_DMA=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_SD_EXTRA_DEVS=40
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_SR_EXTRA_DEVS=2
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_DEBUG_QUEUES is not set
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-CONFIG_INPUT=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_CMDLINE_ON_HOST=y
Copied: tags/src/user-mode-linux/2.6.15-1um-1/config (from rev 23, trunk/src/user-mode-linux/config)
Deleted: tags/src/user-mode-linux/2.6.15-1um-1/debian/README.Debian
===================================================================
--- trunk/src/user-mode-linux/debian/README.Debian 2006-03-25 17:56:18 UTC (rev 22)
+++ tags/src/user-mode-linux/2.6.15-1um-1/debian/README.Debian 2006-03-25 18:01:07 UTC (rev 24)
@@ -1,57 +0,0 @@
-Kernel modules
---------------
-Modules are installed in /usr/lib/uml/modules/<version>. The easiest way to
-get to them from within UML is to use hostfs, e.g.:
-
-mount -t hostfs -o /usr/lib/uml/modules hostfs /lib/modules
-
-or:
-
-echo "hostfs /lib/modules hostfs /usr/lib/uml/modules 0 0" >> /etc/fstab
-
-or copy them into your root filesystem (rootstrap can do this automatically).
-
-Kernel configuration notes
---------------------------
-
-Unlike the UML binaries distributed from the official UML website,
-this kernel is configured not to mount DevFS by default, in order to
-work correctly with a base Debian installation under UML.
-
-If you are using UML rootfs images from the UML website, or need DevFS
-for any other reason, pass "devfs=mount" on the UML command line.
-
-Compiling a Custom UML package
-------------------------------
-
-You must have APT configured such that 'apt-get source' works in order
-to do this the easy way. See sources.list(5).
-
-1. $ apt-get source user-mode-linux
-
-2. # apt-get build-dep user-mode-linux
-
- (must be run as root)
-
-3. $ cd user-mode-linux-UMLVERSION
-
-4. $ debian/rules unpack
-
- Or, unpack other kernel source and update kernel_version in
- debian/rules
-
-5. $ debian/rules patch
-
- Or, apply a UML patch by hand and touch patch-stamp
-
-5. $ cd kernel-source-KVERSION
-
-6. $ make defconf ARCH=um && make config ARCH=um # etc.
-
- All makefile commands must include ARCH=um
-
-7. $ cd ..
-
-8. $ dpkg-buildpackage -rfakeroot -nc -uc
-
- -- Matt Zimmerman <mdz at debian.org>, Fri Jan 2 14:29:13 2004
Copied: tags/src/user-mode-linux/2.6.15-1um-1/debian/README.Debian (from rev 23, trunk/src/user-mode-linux/debian/README.Debian)
Deleted: tags/src/user-mode-linux/2.6.15-1um-1/debian/changelog
===================================================================
--- trunk/src/user-mode-linux/debian/changelog 2006-03-25 17:56:18 UTC (rev 22)
+++ tags/src/user-mode-linux/2.6.15-1um-1/debian/changelog 2006-03-25 18:01:07 UTC (rev 24)
@@ -1,767 +0,0 @@
-user-mode-linux (2.6.14-1um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Stefano Melchior <stefano.melchior at openlabs.it> Sat, 14 Jan 2006 20:30:41 +0100
-
-user-mode-linux (2.6.12-1um-1) unstable; urgency=low
-
- * New upstream release (Closes: #271246, Closes: #271246, Closes: #276993, Closes: #170878).
- * 2.4 and 2.6 support available (Closes: #264722).
- * uml_net support fixed bug (Closes: #140790).
-
- -- Stefano Melchior <stefano.melchior at openlabs.it> Wed, 26 Oct 2005 14:58:47 +0200
-
-user-mode-linux (2.4.26-3um-1) unstable; urgency=low
-
- * New upstream release
- - mara-13-hostfs_access.diff is now obsolete
- - Includes updated config for current Debian kernel source (Closes: #268286)
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 8 Sep 2004 16:49:52 -0700
-
-user-mode-linux (2.4.26-2um-1) unstable; urgency=low
-
- * New upstream release
- - Obsoletes (at least mostly) mara-12-hostfs.diff, remove
- - Obsoletes hostfs-perms.diff, remove
- - Hostfs is back to a basic working state (Closes: #221196), but still
- has serious bugs
- - Should fix the wait_for_stop panic (Closes: #256873)
- * Enable CONFIG_KMOD (Closes: #231057)
- * Enable packet classifiers (Closes: #235037)
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 16 Jul 2004 17:15:39 -0700
-
-user-mode-linux (2.4.26-1um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 5 Jun 2004 11:25:39 -0700
-
-user-mode-linux (2.4.25-1um-1) unstable; urgency=low
-
- * New upstream release
- * Hostfs is broken, include some patches to fix it:
- - mara-12-hostfs.diff, mara-13-hostfs_access.diff:
- patches from Henrik Nordstrom
- - hostfs-perms.diff:
- patch from me to fix one more case
- * Patch needed to fix tt mode on 2.6 hosts is still not merged; include it
- (Closes: #220526)
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 4 Jun 2004 18:18:01 -0700
-
-user-mode-linux (2.4.24-1um-2) unstable; urgency=high
-
- * Build-Depends: kernel-source-2.4.24 (>= 2.4.24-3) to get the fix for
- CAN-2004-0077 (mremap)
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 1 Mar 2004 18:06:08 -0800
-
-user-mode-linux (2.4.24-1um-1) unstable; urgency=low
-
- * New upstream release
- - Fixes timestamps on /proc (Closes: #224215)
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 16 Feb 2004 22:52:45 -0800
-
-user-mode-linux (2.4.23-2um-1) unstable; urgency=low
-
- * New upstream release
- - Fixes RTC problems with processors faster than 2GHz (Closes: #226744)
-
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 19 Jan 2004 09:40:43 -0800
-
-user-mode-linux (2.4.23-1um-3) unstable; urgency=low
-
- * Improve the README.Debian suggestions regarding kernel modules
- * Update file:// URLs in man page to include the html/ subdir in
- user-mode-linux-doc (Closes: #224956)
- * Include upstream changelog (Closes: #224488)
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 13 Jan 2004 09:53:43 -0800
-
-user-mode-linux (2.4.23-1um-2) unstable; urgency=low
-
- * Fix reversed test for DH_BUILD_OPTIONS=nostrip which caused (enormous)
- unstripped modules to be included in the .deb
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 30 Dec 2003 10:11:27 -0800
-
-user-mode-linux (2.4.23-1um-1) unstable; urgency=low
-
- * New upstream release
- * Build-depend on kernel-source-2.4.23, kernel-patch-uml >= 20031230-1
- * Add debian/crypto.diff to source the crypto config (moved from
- kernel-patch-uml)
- * Remove build-dep on gcc-2.95
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 30 Dec 2003 09:06:28 -0800
-
-user-mode-linux (2.4.22-7um-2) unstable; urgency=low
-
- * Start building with the default gcc again. This seems to work OK now,
- and, coincidentally, building with gcc 2.95 seems to break things in
- subtle ways, apparently related to threads. (Closes: #224431) This may
- reopen #176485 (broken slirp transport), but with the new
- uml-utilities uml_switch setup, slirp isn't as interesting, and it's
- much better to have a working UML
- * Modules broken due to missing exported symbols; moving on to 2.4.23
- rather than patching it
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 30 Dec 2003 08:59:22 -0800
-
-user-mode-linux (2.4.22-7um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 16 Dec 2003 14:52:03 -0800
-
-user-mode-linux (2.4.22-6um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 16 Dec 2003 13:58:22 -0800
-
-user-mode-linux (2.4.22-5um-1) unstable; urgency=low
-
- * New upstream release
- * Don't strip loadable modules if DEB_BUILD_OPTIONS contains nostrip
- * Don't rely on the timestamp of arch/um in debian/rules
- * Change the default path to the uml_switch socket to match what is used
- by the uml_switch started by uml-utilities. This means that you can
- now use just "eth0=daemon" and connect to uml_switch.
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 19 Sep 2003 21:34:28 -0400
-
-user-mode-linux (2.4.22-3um-1) unstable; urgency=low
-
- * Support DEB_BUILD_OPTIONS=noopt to build with -O1 rather than -O2
- * Update linux(1) for latest daemon transport syntax
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 12 Sep 2003 09:58:04 -0400
-
-user-mode-linux (2.4.21-1um-1) unstable; urgency=low
-
- * New upstream release
- * No 2.4.22 yet, as there is not yet a kernel-source-2.4.22
- * New kernel-patch-uml fixes some bugs:
- - 2.4.21-based (Closes: #205135)
- - Exports missing symbols so that modules work (Closes: #208355)
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 4 Sep 2003 17:08:41 -0400
-
-user-mode-linux (2.4.20-8um-2) unstable; urgency=low
-
- * Fix man page to correctly document the daemon transport
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 1 Sep 2003 14:05:14 -0400
-
-user-mode-linux (2.4.20-8um-1) unstable; urgency=low
-
- * New upstream release
- * Disable SMP support because it breaks the build
- * Minor debian/rules cleanup
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 1 Sep 2003 00:44:54 -0400
-
-user-mode-linux (2.4.20-7um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 8 Aug 2003 18:25:16 -0400
-
-user-mode-linux (2.4.20-6um-2) unstable; urgency=low
-
- * Build-Depends: modutils (Closes: #198337)
- * Build-Depends: kernel-patch-uml (= 20030606-2)
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 24 Jul 2003 09:30:46 -0400
-
-user-mode-linux (2.4.20-6um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 6 Jun 2003 10:11:56 -0400
-
-user-mode-linux (2.4.20-5um-1) unstable; urgency=low
-
- * New upstream release
- * Add reference to linux --help in man page
- * Remove old info about root-hostfs from man page 'ubd' section, point
- to 'root'
- * Clean up debian/rules a bit
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 23 May 2003 18:25:21 -0400
-
-user-mode-linux (2.4.20-4um-1) unstable; urgency=low
-
- * New upstream release
- - Fixes hostfs permissions bug (Closes: #188320)
- * Correct file:// URLs in man page (Closes: #190412)
- * Document new hostfs root syntax in man page (Closes: #190676)
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 25 Apr 2003 00:26:24 -0400
-
-user-mode-linux (2.4.20-3um-1) unstable; urgency=low
-
- * New upstream release
- * Enable netfilter stuffs (Closes: #187399)
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 4 Apr 2003 19:27:05 -0500
-
-user-mode-linux (2.4.20-2um-1) unstable; urgency=low
-
- * New upstream release
- * Build with gcc-2.95 (hopefully Closes: #176485)
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 24 Mar 2003 23:37:59 -0500
-
-user-mode-linux (2.4.20-1um-1) unstable; urgency=low
-
- * New upstream release
- * Change version number slightly to match upstream's scheme
- * Suggest kernel-patch-skas, now in unstable
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 28 Feb 2003 14:06:46 -0500
-
-user-mode-linux (2.4.19.50um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 6 Feb 2003 22:55:27 -0500
-
-user-mode-linux (2.4.19.49um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 2 Feb 2003 20:22:22 -0500
-
-user-mode-linux (2.4.19.48um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 28 Jan 2003 00:08:29 -0500
-
-user-mode-linux (2.4.19.46um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 9 Jan 2003 19:46:07 -0500
-
-user-mode-linux (2.4.19.45um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 24 Dec 2002 17:19:14 -0500
-
-user-mode-linux (2.4.19.40um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 19 Dec 2002 20:10:17 -0500
-
-user-mode-linux (2.4.19.38um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 15 Dec 2002 21:41:23 -0500
-
-user-mode-linux (2.4.19.37um-1) unstable; urgency=low
-
- * New upstream release
- * Enable SKAS support (requires host kernel patch in order to work)
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 12 Dec 2002 09:45:05 -0500
-
-user-mode-linux (2.4.19.33um-1) unstable; urgency=low
-
- * New upstream release
- * Enable NFS root and dependent options
- * Enable initrd (Closes: #170681)
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 2 Dec 2002 14:55:01 -0500
-
-user-mode-linux (2.4.19.25um-1) unstable; urgency=low
-
- * New upstream release
- * Remove temporary module work area in 'clean' target
- * Use xargs --no-run-if-empty to avoid an error if no modules are
- configured
- * Compile in loop device support, rather than building as a module, to
- allow for easier installation testing (Closes: #165958)
- * Enable NFS (v2 and v3), SMB, NCP, Coda and Intermezzo support
- (Closes: #166780)
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 3 Nov 2002 15:38:45 -0500
-
-user-mode-linux (2.4.19.20um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 25 Oct 2002 00:41:16 -0400
-
-user-mode-linux (2.4.19.17um-1) unstable; urgency=low
-
- * New upstream release
- * Temporarily disable pcap transport, since it didn't build
- correctly
- * Enable MD and LVM
- * Enable slirp transport. This may allow for networking with minimal
- configuration and no root privileges, but is relatively new.
- * Enable SMP!
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 21 Oct 2002 21:44:42 -0400
-
-user-mode-linux (2.4.19.12um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 7 Oct 2002 22:05:55 -0400
-
-user-mode-linux (2.4.19.11um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 6 Oct 2002 22:46:24 -0400
-
-user-mode-linux (2.4.19.9um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 4 Oct 2002 23:49:52 -0400
-
-user-mode-linux (2.4.19.6um-1) unstable; urgency=low
-
- * Remove gcc and make from Build-Depends, as they are clearly
- build-essential. What was I thinking...
- * Suggest x-terminal-emulator, rater than xterm, since it works now
- (since 2.4.18.48um-1)
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 22 Sep 2002 11:44:19 -0400
-
-user-mode-linux (2.4.19.4um-1) unstable; urgency=low
-
- * New upstream release
- * Add note to README.Debian about how kernel modules are handled
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 14 Sep 2002 12:45:19 -0400
-
-user-mode-linux (2.4.19.2um-2) unstable; urgency=low
-
- * Now to take care of some easy bugs...
- * Add "UML" to description (Closes: #156806)
- * Enable IPv6 module (Closes: #156465)
- * Enable netfilter (Closes: #154674)
- * Enable a bunch of other networking stuff as well, since network
- testing seems to be a popular UML application
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 5 Sep 2002 22:44:37 -0400
-
-user-mode-linux (2.4.19.2um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 5 Sep 2002 22:13:34 -0400
-
-user-mode-linux (2.4.18.49um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 3 Aug 2002 12:08:52 -0400
-
-user-mode-linux (2.4.18.48um-1) unstable; urgency=low
-
- * New upstream release
- * Mention DevFS config in README.Debian (Closes: #154276)
- * This version supports non-xterm terminal emulators, so use
- x-terminal-emulator by default
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 31 Jul 2002 00:24:17 -0400
-
-user-mode-linux (2.4.18.41um-1) unstable; urgency=low
-
- * New upstream release
- * Disable the hostaudio driver, since it doesn't build anymore
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 18 Jul 2002 23:32:54 -0400
-
-user-mode-linux (2.4.18.39um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 8 Jul 2002 21:32:20 -0400
-
-user-mode-linux (2.4.18.37um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 7 Jul 2002 00:27:08 -0400
-
-user-mode-linux (2.4.18.36um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 5 Jul 2002 17:36:01 -0400
-
-user-mode-linux (2.4.18.35um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 29 Jun 2002 10:34:15 -0400
-
-user-mode-linux (2.4.18.32um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 15 Jun 2002 12:42:09 -0400
-
-user-mode-linux (2.4.18.31um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 5 Jun 2002 21:22:45 -0400
-
-user-mode-linux (2.4.18.30um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 29 May 2002 23:18:46 -0400
-
-user-mode-linux (2.4.18.29um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 23 May 2002 19:58:34 -0400
-
-user-mode-linux (2.4.18.28um-1) unstable; urgency=low
-
- * New upstream release
- * Requires uml-utilities >= 20020521
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 21 May 2002 20:32:43 -0400
-
-user-mode-linux (2.4.18.26um-1) unstable; urgency=low
-
- * New upstream release
- * Fixed symbol export issue which prevented release of 25um
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 19 May 2002 12:20:42 -0400
-
-user-mode-linux (2.4.18.25um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 15 May 2002 19:25:14 -0400
-
-user-mode-linux (2.4.18.24um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 13 May 2002 23:11:43 -0400
-
-user-mode-linux (2.4.18.23um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 7 May 2002 23:27:44 -0400
-
-user-mode-linux (2.4.18.22um-1) unstable; urgency=low
-
- * New upstream release
- * UML is now self-hosting, meaning that you can now run UML within
- itself
- http://www.geocrawler.com/lists/3/SourceForge/709/0/8569643/
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 5 May 2002 20:29:59 -0400
-
-user-mode-linux (2.4.18.21um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 28 Apr 2002 23:09:11 -0400
-
-user-mode-linux (2.4.18.20um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 27 Apr 2002 14:08:16 -0400
-
-user-mode-linux (2.4.18.18um-1) unstable; urgency=low
-
- * New upstream release
- * Remove obsolete note about devfs in README.Debian
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 21 Apr 2002 23:13:45 -0400
-
-user-mode-linux (2.4.18.17um-1) unstable; urgency=low
-
- * New upstream release
- * Enable initrd support
- * Add note to README.Debian about devfs and Debian root filesystems
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 13 Apr 2002 18:13:59 -0400
-
-user-mode-linux (2.4.18.16um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 10 Apr 2002 23:08:16 -0400
-
-user-mode-linux (2.4.18.15um-1) unstable; urgency=low
-
- * New upstream release, lots of bug fixes
- - Now supports COW on block devices (Closes: #140789)
- - I think #140791 may be fixed as well, but have no way to test
- * Requires uml-utilities 20020407
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 9 Apr 2002 00:49:31 -0400
-
-user-mode-linux (2.4.18.13um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 2 Apr 2002 20:39:18 -0500
-
-user-mode-linux (2.4.18.12um-1) unstable; urgency=low
-
- * New upstream release
- - Fixes the console flow control bug which resulted in truncated
- output
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 28 Mar 2002 21:39:17 -0500
-
-user-mode-linux (2.4.18.11um-1) unstable; urgency=low
-
- * New upstream release. Jeff Dike <jdike at karaya.com>:
-
- - Since I don't yet know how to eliminate the problems people are seeing
- withthe SIGWINCH setup, I made UML more robust against them. You may
- see ugly error messages, but they shouldn't kill UML any more. I'd
- appreciate knowing about any easy ways that anyone finds of getting
- the ugly error messages to happen.
-
- - The crash in the network setup that Matt Zimmerman saw should be gone.
-
- - bfs filesystems will now mount now that the ubd hard sector size is 512 bytes.
-
- - apt-get now works on hostfs now that hostfs_writepage returns the
- proper value on success.
-
- - John Byrne's thread creation fixes are now in.
-
- - I cleaned up various other small items as well.
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 24 Mar 2002 00:08:00 -0500
-
-user-mode-linux (2.4.18.10um-1) unstable; urgency=low
-
- * New upstream release.
- Jeff Dike <jdike at karaya.com>:
- - This patch fixes the winch_interrupt infinite error flood plus some
- other SIGWINCH bugs.
- - The ptrace headers were cleaned up so that they match the updated
- UML porting guide.
- - Added TIOCMGET to the list of officially unsupported serial line
- ioctls. This gets rid of the error messages you get when you hook
- two UMLs together overa serial line consisting of a host pty/tty
- pair.
- - I added in some of John Byrne's smaller thread fixes.
-
- * Build-depend on exact versions of user-mode-linux and kernel-patch-uml
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 22 Mar 2002 23:08:54 -0500
-
-user-mode-linux (2.4.18.9um-1) unstable; urgency=low
-
- * New upstream release
- - Now supports SIGWINCH for terminals
- * Fixes unresolved symbols in loop and isofs
- * Requires uml-utilities >= 20020320 which is required for port
- channels
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 21 Mar 2002 22:15:28 -0500
-
-user-mode-linux (2.4.18.8um-1) unstable; urgency=low
-
- * New upstream release
- * Require uml-utilities >= 20020318
- * Temporarily disable the loop block device and isofs due to unresolved
- symbols
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 19 Mar 2002 09:14:56 -0500
-
-user-mode-linux (2.4.18.7um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 15 Mar 2002 21:27:49 -0500
-
-user-mode-linux (2.4.18.6um-1) unstable; urgency=low
-
- * New upstream release
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 14 Mar 2002 19:27:02 -0500
-
-user-mode-linux (2.4.18.4um-3) unstable; urgency=medium
-
- * Rebuild with kernel-source-2.4.18 2.4.18-3, which includes the zlib
- security fix
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 14 Mar 2002 09:21:50 -0500
-
-user-mode-linux (2.4.18.4um-2) unstable; urgency=low
-
- * Don't mount devfs by default, to match the Debian packaged kernels. A
- base Debian system will not work in UML if devfs is mounted (unless
- devfs is running), so everyone had to pass devfs=nomount. It's easier
- to pass devfs=mount if the UML system supports it.
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 13 Mar 2002 09:15:20 -0500
-
-user-mode-linux (2.4.18.4um-1) unstable; urgency=low
-
- * New upstream release
- * Remove 'build' symlink from kernel module tree (Closes: #138028)
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 12 Mar 2002 22:37:21 -0500
-
-user-mode-linux (2.4.18.2um-1) unstable; urgency=low
-
- * New upstream release, now that kernel-source-2.4.18 is in
- * Suggests the newly-released rootstrap tool for easy building of UML
- root filesystems
- * Enhance the man page, including mentioning the 's' (synchronous)
- option for ubd devices (Closes: #137375)
- * Disable CONFIG_FS_NTFS because it results in undefined symbols
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 9 Mar 2002 15:41:32 -0500
-
-user-mode-linux (2.4.17.14um-1) unstable; urgency=low
-
- * New upstream release.
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 25 Feb 2002 00:10:05 -0500
-
-user-mode-linux (2.4.17.13um-1) unstable; urgency=low
-
- * New upstream release.
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 22 Feb 2002 22:59:30 -0500
-
-user-mode-linux (2.4.17.12um-1) unstable; urgency=low
-
- * New upstream release.
- * Do the initial modules installation in a temporary directory, due to
- some weirdness with depmod walking the filesystem and finding
- /usr/bin/linux
- * Install a lintian override for statically linked /usr/bin/linux
- * Strip debugging symbols from UML modules. This makes the installed
- package MUCH smaller.
- * Build in cramfs support, so that it can be used for booting
- * Enable tmpfs module
- * Not releasing due to a panic every time klogd is killed when using my
- test images
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 20 Feb 2002 23:22:51 -0500
-
-user-mode-linux (2.4.17.11um-1) unstable; urgency=low
-
- * New upstream release.
- * Requires the latest uml-utilities, as the control sockets are now
- under $HOME instead of /tmp
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 12 Feb 2002 23:43:03 -0500
-
-user-mode-linux (2.4.17.10um-1) unstable; urgency=low
-
- * New upstream release.
- * Flesh out the man page some, including content from
- user-mode-linux-doc, and use references to that package instead of the
- website where appropriate
- * Note in README.Debian that apt-get build-dep must be run as root
- * Now searches PATH to find kernel when rebooting (Closes: #130875)
- * Build some additional modules which might be useful
- * Compile in ext3 and reiserfs support so that they can be used for the
- root filesystem
- * Include modules unpacked instead of in a tarball, so that they can
- more easily be accessed from UML via hostfs
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 31 Jan 2002 00:10:22 -0500
-
-user-mode-linux (2.4.17.9um-1) unstable; urgency=low
-
- * New upstream release.
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 25 Jan 2002 21:47:16 -0500
-
-user-mode-linux (2.4.17.8um-1) unstable; urgency=low
-
- * New upstream release.
- * Suggests: user-mode-linux-doc (which is in incoming)
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 22 Jan 2002 17:32:59 -0500
-
-user-mode-linux (2.4.17.7um-1) unstable; urgency=low
-
- * New upstream release.
- * Add Suggests: xterm (Closes: #129776)
-
- -- Matt Zimmerman <mdz at debian.org> Tue, 22 Jan 2002 02:14:06 -0500
-
-user-mode-linux (2.4.17.5um-1) unstable; urgency=medium
-
- * New upstream release.
- * Compile in hostfs support (Closes: #128506)
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 14 Jan 2002 19:03:26 -0500
-
-user-mode-linux (2.4.17.4um-1) unstable; urgency=low
-
- * New upstream release.
-
- -- Matt Zimmerman <mdz at debian.org> Fri, 4 Jan 2002 20:20:58 -0500
-
-user-mode-linux (2.4.17.3um-1) unstable; urgency=low
-
- * New upstream release.
-
- -- Matt Zimmerman <mdz at debian.org> Wed, 2 Jan 2002 01:00:06 -0500
-
-user-mode-linux (2.4.17.2um-1) unstable; urgency=low
-
- * New upstream release.
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 30 Dec 2001 22:19:52 -0500
-
-user-mode-linux (2.4.17.1um-1) unstable; urgency=low
-
- * New upstream release.
- * Modified versioning scheme to match upstream's apparent intent
- * Depend on newer uml-utilities, as the path to uml_net changed
- * Enhance README.Debian to explain how to build with a different kernel
- version
-
- -- Matt Zimmerman <mdz at debian.org> Sat, 29 Dec 2001 19:00:45 -0500
-
-user-mode-linux (0.53-2.4.16.2um-1) unstable; urgency=low
-
- * New upstream release.
-
- -- Matt Zimmerman <mdz at debian.org> Mon, 10 Dec 2001 01:25:30 -0500
-
-user-mode-linux (0.53-2.4.16.1um-1) unstable; urgency=low
-
- * New upstream release.
-
- -- Matt Zimmerman <mdz at debian.org> Sun, 9 Dec 2001 22:47:23 -0500
-
-user-mode-linux (0.51-2.4.14-6-1) unstable; urgency=low
-
- * Initial Release. (Closes: #82484)
-
- -- Matt Zimmerman <mdz at debian.org> Thu, 6 Dec 2001 13:16:53 -0500
-
-
Copied: tags/src/user-mode-linux/2.6.15-1um-1/debian/changelog (from rev 23, trunk/src/user-mode-linux/debian/changelog)
Deleted: tags/src/user-mode-linux/2.6.15-1um-1/debian/control
===================================================================
--- trunk/src/user-mode-linux/debian/control 2006-03-25 17:56:18 UTC (rev 22)
+++ tags/src/user-mode-linux/2.6.15-1um-1/debian/control 2006-03-25 18:01:07 UTC (rev 24)
@@ -1,21 +0,0 @@
-Source: user-mode-linux
-Section: misc
-Priority: extra
-Maintainer: Stefano Melchior <stefano.melchior at openlabs.it>
-Build-Depends: debhelper (>> 4.0.0), linux-source-2.6.14, docbook-to-man, bzip2, m4, modutils
-Uploaders: Andreas Schuldei <andreas at schuldei.org>
-Standards-Version: 3.6.2
-
-Package: user-mode-linux
-Architecture: i386
-Depends: uml-utilities (>= 20040406-1)
-Suggests: x-terminal-emulator, rootstrap, user-mode-linux-doc, slirp, kernel-patch-skas
-Description: User-mode Linux (kernel)
- User-mode Linux (UML) is a port of the Linux kernel to its own system
- call interface. It provides a kind of virtual machine, which runs
- Linux as a user process under another Linux kernel. This is useful
- for kernel development, sandboxes, jails, experimentation, and many
- other things.
- .
- This package contains the kernel itself, as an executable program,
- and the associated kernel modules.
Copied: tags/src/user-mode-linux/2.6.15-1um-1/debian/control (from rev 23, trunk/src/user-mode-linux/debian/control)
Deleted: tags/src/user-mode-linux/2.6.15-1um-1/debian/rules
===================================================================
--- trunk/src/user-mode-linux/debian/rules 2006-03-25 17:56:18 UTC (rev 22)
+++ tags/src/user-mode-linux/2.6.15-1um-1/debian/rules 2006-03-25 18:01:07 UTC (rev 24)
@@ -1,121 +0,0 @@
-#!/usr/bin/make -f
-# Sample debian/rules that uses debhelper.
-# GNU copyright 1997 to 1999 by Joey Hess.
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-# This is the debhelper compatability version to use.
-export DH_COMPAT=3
-
-config_target:=oldconfig
-kernel_version:=2.6.14
-kernel_dir:=linux-source-$(kernel_version)
-debian:=$(CURDIR)/debian
-tmp:=$(debian)/user-mode-linux
-tmpmodules:=$(debian)/uml-modules
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-KBUILDVARS := CFLAGS_KERNEL=-O1
-endif
-
-unpack: unpack-stamp
-unpack-stamp:
- tar -x --bzip2 -f /usr/src/linux-source-$(kernel_version).tar.bz2
- touch $@
-
-patch: patch-stamp
-patch-stamp: unpack-stamp
- touch $@
-
-$(kernel_dir)/.config: config
- cp $^ $@
-
-configure: configure-stamp
-configure-stamp: patch-stamp $(kernel_dir)/.config
- dh_testdir
-
- $(MAKE) -C $(kernel_dir) $(config_target) ARCH=um
-
- touch $@
-
-build: build-stamp
-build-stamp: configure-stamp
- dh_testdir
-
- $(MAKE) -C $(kernel_dir) $(KBUILDVARS) linux modules ARCH=um
- docbook-to-man linux.sgml > linux.1
-
- touch $@
-
-clean:
- dh_testdir
- dh_testroot
- rm -f unpack-stamp patch-stamp build-stamp configure-stamp
-
- rm -rf $(kernel_dir) linux.1 $(tmpmodules) changelog
-
- dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_clean -k
- dh_installdirs usr/bin usr/lib/uml \
- usr/share/doc/user-mode-linux usr/share/lintian/overrides
-
- install $(kernel_dir)/linux $(tmp)/usr/bin
- $(MAKE) -C $(kernel_dir) modules_install ARCH=um \
- INSTALL_MOD_PATH=$(tmpmodules)
-ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
- find $(tmpmodules) -name '*.o' \
- | xargs --no-run-if-empty strip --strip-debug
-endif
- -rm $(tmpmodules)/lib/modules/*/build
- mv $(tmpmodules)/lib/modules \
- $(tmp)/usr/lib/uml/modules
- rm -rf $(tmpmodules)
-
- install -m 644 $(kernel_dir)/.config \
- $(tmp)/usr/share/doc/user-mode-linux/config
-
- install -m 644 debian/lintian.overrides \
- $(tmp)/usr/share/lintian/overrides/user-mode-linux
-
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
- dh_testdir
- dh_testroot
-# dh_installdebconf
- dh_installdocs
- dh_installexamples
- dh_installmenu
-# dh_installlogrotate
-# dh_installemacsen
-# dh_installpam
-# dh_installmime
-# dh_installinit
- dh_installcron
- dh_installman linux.1
- dh_installinfo
-# dh_undocumented
- dh_installchangelogs $(CURDIR)/debian/changelog
- dh_link
- dh_strip
- dh_compress
- dh_fixperms
-# dh_makeshlibs
- dh_installdeb
-# dh_perl
- dh_shlibdeps
- dh_gencontrol
- dh_md5sums
- dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install configure
Copied: tags/src/user-mode-linux/2.6.15-1um-1/debian/rules (from rev 23, trunk/src/user-mode-linux/debian/rules)
Deleted: tags/src/user-mode-linux/2.6.15-1um-1/linux.sgml
===================================================================
--- trunk/src/user-mode-linux/linux.sgml 2006-03-25 17:56:18 UTC (rev 22)
+++ tags/src/user-mode-linux/2.6.15-1um-1/linux.sgml 2006-03-25 18:01:07 UTC (rev 24)
@@ -1,472 +0,0 @@
-<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
-
-<!-- Process this file with docbook-to-man to generate an nroff manual
- page: `docbook-to-man manpage.sgml > manpage.1'. You may view
- the manual page with: `docbook-to-man manpage.sgml | nroff -man |
- less'. A typical entry in a Makefile or Makefile.am is:
-
-manpage.1: manpage.sgml
- docbook-to-man $< > $@
- -->
-
- <!-- Fill in your name for FIRSTNAME and SURNAME. -->
- <!ENTITY dhfirstname "<firstname>Matt</firstname>">
- <!ENTITY dhsurname "<surname>Zimmerman</surname>">
- <!-- Please adjust the date whenever revising the manpage. -->
- <!ENTITY dhdate "<date>December 6, 2001</date>">
- <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
- allowed: see man(7), man(1). -->
- <!ENTITY dhsection "<manvolnum>1</manvolnum>">
- <!ENTITY dhemail "<email>mdz at debian.org</email>">
- <!ENTITY dhusername "Matt Zimmerman">
- <!ENTITY dhucpackage "<refentrytitle>LINUX</refentrytitle>">
- <!ENTITY dhpackage "linux">
-
- <!ENTITY debian "<productname>Debian GNU/Linux</productname>">
- <!ENTITY gnu "<acronym>GNU</acronym>">
-]>
-
-<refentry>
- <refentryinfo>
- <address>
- &dhemail;
- </address>
- <author>
- &dhfirstname;
- &dhsurname;
- </author>
- <copyright>
- <year>2001</year>
- <holder>&dhusername;</holder>
- </copyright>
- &dhdate;
- </refentryinfo>
- <refmeta>
- &dhucpackage;
-
- &dhsection;
- </refmeta>
- <refnamediv>
- <refname>&dhpackage;</refname>
-
- <refpurpose>User-mode Linux</refpurpose>
- </refnamediv>
- <refsynopsisdiv>
- <cmdsynopsis>
- <command>linux</command>
- <arg choice=opt rep=repeat><replaceable>options</replaceable></arg>
-
- </cmdsynopsis>
- </refsynopsisdiv>
- <refsect1>
- <title>DESCRIPTION</title>
-
- <para>This manual page briefly documents User-mode Linux.</para>
-
- <para>This manual page was written for the &debian; distribution
- because the original program does not have a manual page. Check
- <command>linux --help</command> for an up-to-date synopsis.</para>
-
- </refsect1>
- <refsect1>
- <title>OPTIONS</title>
-
- <variablelist>
- <varlistentry>
- <term>mem=<replaceable>memory</replaceable>
- </term>
- <listitem>
- <para>
- This controls how much "physical" memory the kernel
- allocates for the system. The size is specified as a
- number followed by one of 'k', 'K', 'm', 'M', which have
- the obvious meanings. This is not related to the amount
- of memory in the physical machine. It can be more, and the
- excess, if it's ever used, will just be swapped out.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>iomem=<replaceable>name</replaceable>,<replaceable>file</replaceable>
- </term>
- <listitem>
- <para>
- Configure <replaceable>file</replaceable> as a named IO
- memory region named <replaceable>name</replaceable>.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>gdb-pid=<replaceable>pid</replaceable></term>
- <listitem>
- <para>
- gdb-pid is used to attach an external debugger to UML.
- This may be an already-running gdb or a debugger-like
- process like strace.
- </para>
- </listitem>
- </varlistentry>
- <varlistentry>
- <term>debugtrace</term>
- <listitem>
- <para>
- Causes the tracing thread to pause until it is attached by
- a debugger and continued. This is mostly for debugging
- crashes early during boot, and should be pretty much
- obsoleted by the debug switch.
- </para>
- </listitem>
- </varlistentry>
- <varlistentry>
- <term>honeypot</term>
- <listitem>
- <para>
- This makes UML put process stacks in the same location as
- they are on the host, allowing exploits such as stack
- smashes to work against UML.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>debug</term>
- <listitem>
- <para>
- Starts up the kernel under the control of gdb. See the
- kernel debugging tutorial and the debugging session pages
- in the user-mode-linux-doc package for more information.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>root=<replaceable>file</replaceable></term>
- <listitem>
- <para>
- This is actually used by the generic kernel in exactly the
- same way as in any other kernel. If you configure a number
- of block devices and want to boot off something other than
- ubd0, you would use something like "root=/dev/ubd5".
- </para>
-
- <para>
- To use hostfs for the root filesystem, use the syntax
- "root=/dev/root rootflags=/ rootfstype=hostfs"
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>umid=<replaceable>name</replaceable></term>
- <listitem>
- <para>
- This is used to assign a unique identity to this UML
- machine This is used for naming the pid file and
- management console socket.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>uml_dir=<replaceable>directory</replaceable></term>
- <listitem>
- <para>
- The location to place the pid and umid files.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>initrd=<replaceable>file</replaceable></term>
- <listitem>
- <para>
- This is used to boot UML from an initrd image. The
- argument is the name of the file containing the image.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>jail</term>
- <listitem>
- <para>
- Enables the protection of kernel memory from processes
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>con[0-9]*=<replaceable>description</replaceable></term>
- <listitem>
- <para>
- Attach a console to a host channel. Examples of channels
- include ttys, ptys, pts terminals, xterms, and file
- descriptors.
- </para>
- <variablelist>
- <varlistentry>
- <term>tty</term>
- <listitem>
- <para>
- This will make UML attach the device to the
- specified tty. If the tty that you specify is the
- slave end of a tty/pty pair, something else must
- have already opened the corresponding pty in order
- for this to work.
- <userinput>con1=tty:/dev/tty3</userinput>
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>pty</term>
- <listitem>
- <para>
- This will cause UML to allocate a free host pty for
- the device. The pty will be announced in the boot
- log. You would attach to it via the corresponding
- tty.
- <userinput>con1=pty</userinput>
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>pts terminal</term>
- <listitem>
- <para>
- This is similar to pty above, but the specified UML
- device will be attached to a free pts device on the
- host. Look at the boot log to see which one.
- <userinput>con1=pts</userinput>
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>xterm</term>
- <listitem>
- <para>
- UML will run an xterm and the device will be
- attached to it.
- <userinput>con1=xterm</userinput>
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>file descriptors</term>
- <listitem>
- <para>
- If you set up a file descriptor on the UML command
- line, you can attach a UML device to it. This is
- most commonly used to put the main console back on
- stdin and stdout after assigning all the other
- consoles to something else.
- <userinput>con0=fd:0,fd:1 con=xterm</userinput>
- </para>
- </listitem>
- </varlistentry>
- </variablelist>
-
- <para>You can also specify different input and output
- channels for a device by putting a comma between them:
- <userinput>ssl3=tty:/dev/tty2,xterm</userinput>. See
- <ulink
- url="file:///usr/share/doc/user-mode-linux-doc/html/input.html">Setting
- up Serial Lines and Consoles</ulink> for a more information.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>ssl[0-9]*=<replaceable>description</replaceable></term>
- <listitem>
- <para>
- Attach a serial line to a host channel. The same options
- are supported as for consoles, described above.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>fake_ide</term>
- <listitem>
- <para>
- Create ide0 entries that map onto ubd devices.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>ubd[0-7][r][s]=file</term>
- <listitem>
- <para>
-
- <simplelist>
- <member>
- <userinput>ubd0r=/tmp/debian-woody.ext2</userinput>
- </member>
-
- <member>
- <userinput>ubd0rs=/tmp/debian-woody.ext2</userinput>
- </member>
-
- <member>
- <userinput>ubd0=/tmp/chroot</userinput>
- </member>
-
- </simplelist>
- </para>
-
- <para>
-
- This is used to associate a device with a file or in the
- underlying filesystem. Usually, there is a filesystem in
- the file, but that's not required. Swap devices
- containing swap files can be specified like this. Also, a
- file which doesn't contain a filesystem can have its
- contents read in the virtual machine by running dd on the
- device. Appending an 'r' will cause that device to be
- mounted read-only. Appending an 's' tells UML to open the
- file using O_SYNC (synchronous I/O).
-
- </para>
-
- <para>
- The ubd option can no longer be used to specify a hostfs
- root filesystem. See the "root" option for a more correct
- method.
- </para>
-
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>fakehd</term>
- <listitem>
- <para>
- Change the ubd device name to "hd", allowing programs
- within UML to access UBD devices as if they were normal
- IDE disks.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>eth[0-9]+=<replaceable>transport</replaceable>,<replaceable>options</replaceable></term>
- <listitem>
- <para>
- Configure a network device. Formats and examples follow (one
- for each configured transport).
- </para>
-
- <para>
- eth[0-9]+=ethertap,<replaceable>device</replaceable>,<replaceable>ethernet_address</replaceable>,<replaceable>tap_ip_address</replaceable>
- <userinput>
- eth0=ethertap,tap0,,192.168.0.1
- </userinput>
- </para>
-
- <para>
- eth[0-9]+=tuntap,,<replaceable>ethernet_address</replaceable>,<replaceable>ip_address</replaceable>
- <userinput>
- eth0=tuntap,,fe:fd:0:0:0:1,192.168.0.1
- </userinput>
- </para>
-
- <para>
- eth[0-9]+=daemon,<replaceable>ethernet_address</replaceable>,<replaceable>type</replaceable>,<replaceable>control_socket</replaceable>,<replaceable>data_socket</replaceable>
- <userinput>
- eth0=daemon,,unix,/var/run/uml-utilities/uml_switch.ctl
- </userinput>
- </para>
-
- <para>
- eth[0-9]+=slip,<replaceable>slip_ip</replaceable>
- <userinput>
- eth0=slip,192.168.0.1
- </userinput>
- </para>
-
-
- <para>
- eth[0-9]+=mcast,<replaceable>ethernet_address</replaceable>,<replaceable>address</replaceable>,<replaceable>port</replaceable>,<replaceable>ttl</replaceable>
- <userinput>
- eth0=mcast,,224.2.3.4:5555,3
- </userinput>
- </para>
-
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>mode=tt</term>
- <listitem>
- <para>
- When both CONFIG_MODE_TT and CONFIG_MODE_SKAS are enabled,
- this option forces UML to run in tt (tracing thread) mode.
- It is not the default because it's slower and less secure
- than skas mode.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>--help</term>
- <listitem>
- <para>
- Prints syntax information.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>--version</term>
- <listitem>
- <para>
- Prints the version number of the kernel
- </para>
- </listitem>
- </varlistentry>
-
- </variablelist>
- </refsect1>
- <refsect1>
- <title>SEE ALSO</title>
-
- <para>The <ulink
- url="file:///usr/share/doc/user-mode-linux-doc/html/UserModeLinux-HOWTO.html">UserModeLinux-HOWTO</ulink></para>
-
- </refsect1>
- <refsect1>
- <title>AUTHOR</title>
-
- <para>User-mode Linux was written by Jeff Dike and others.</para>
-
- <para>This manual page was written by &dhusername; &dhemail; for
- the &debian; system, based on <command>linux --help</command>
- and the user-mode-linux website.
- </para>
-
- </refsect1>
-</refentry>
-
-<!-- Keep this comment at the end of the file
-Local variables:
-mode: sgml
-sgml-omittag:t
-sgml-shorttag:t
-sgml-minimize-attributes:nil
-sgml-always-quote-attributes:t
-sgml-indent-step:2
-sgml-indent-data:t
-sgml-parent-document:nil
-sgml-default-dtd-file:nil
-sgml-exposed-tags:nil
-sgml-local-catalogs:nil
-sgml-local-ecat-files:nil
-End:
--->
Copied: tags/src/user-mode-linux/2.6.15-1um-1/linux.sgml (from rev 23, trunk/src/user-mode-linux/linux.sgml)
More information about the Pkg-uml-commit
mailing list