[Pkg-voip-commits] r3043 - zaptel/trunk/debian
Tzafrir Cohen
tzafrir-guest at alioth.debian.org
Sat Jan 20 21:16:13 CET 2007
Author: tzafrir-guest
Date: 2007-01-20 21:16:12 +0100 (Sat, 20 Jan 2007)
New Revision: 3043
Removed:
zaptel/trunk/debian/fxotune.8
zaptel/trunk/debian/ztcfg.sgml
zaptel/trunk/debian/ztmonitor.sgml
zaptel/trunk/debian/ztspeed.8
zaptel/trunk/debian/zttest.8
zaptel/trunk/debian/zttool.sgml
Log:
Remove man pages from debian/ as they are included in upstream.
Deleted: zaptel/trunk/debian/fxotune.8
===================================================================
--- zaptel/trunk/debian/fxotune.8 2007-01-20 19:53:28 UTC (rev 3042)
+++ zaptel/trunk/debian/fxotune.8 2007-01-20 20:16:12 UTC (rev 3043)
@@ -1,66 +0,0 @@
-.TH FXOTUNE 8 "September 10th, 2005" "Xorcom Rapid Asterisk" "Linux Programmer's Manual"
-.SH NAME
-.B fxotune
-\(em automatically tune FXO channels on a Digium TDM400 card
-.SH SYNOPSIS
-.B fxotune -i
-.I <dialstr>
-\(em detect
-
-.B fxotune -s
-\(em load settings
-
-.SH DESCRIPTION
-.B fxotune
-is a script that fine-tune parameters of the FXO modules of the TDM400
-card. Whene run in
-.I detect
-mode (-i) it detects and tunes all the FXO channels of such cards. It
-needs a dial string after which the line(s) will give dial tone.
-
-It writes settings to a configuration file (/etc/fxotune.conf , name
-is hardwired) from which it can be loaded (e.g: at startup) using -s .
-
-
-.SH OPTIONS
-.B -i
-.RS
-.I dialstr
-Start detecting optimal settings.
-.I dialstr
-Is a number needed to dial to get a dial tone.
-The test can take several minutes, and must be performed when Asterisk
-is not running.
-
-For example:
-.RS
-fxotune -i 9
-.RE
-if you need to dial 9 for an external line. If you always get a line, you
-can simply use any digit.
-.RE
-
-.B -s
-.RS
-Load settings from the last test. Used at startup.
-.RE
-
-.SH FILES
-.I /etc/fxotune.conf
-.RS
-The configuration file generated by fxotune in detect mode and from which
-configuration is loaded when
-.B -s
-is used.
-
-.SH SEE ALSO
-ztcfg(8), zttool(8), ztmonitor(8), asterisk(8).
-
-.SH AUTHOR
-This manual page was written by Tzafrir Cohen <tzafrir.cohen at xorcom.com>
-Permission is granted to copy, distribute and/or modify this document under
-the terms of the GNU General Public License, Version 2 any
-later version published by the Free Software Foundation.
-
-On Debian systems, the complete text of the GNU General Public
-License can be found in /usr/share/common-licenses/GPL.
Deleted: zaptel/trunk/debian/ztcfg.sgml
===================================================================
--- zaptel/trunk/debian/ztcfg.sgml 2007-01-20 19:53:28 UTC (rev 3042)
+++ zaptel/trunk/debian/ztcfg.sgml 2007-01-20 20:16:12 UTC (rev 3043)
@@ -1,167 +0,0 @@
-<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
-
-<!-- Man page for the ztcfg command of the zaptel package -->
-
- <!ENTITY dhfirstname "<firstname>Santiago</firstname>">
- <!ENTITY dhsurname "<surname>Ruano Rincón</surname>">
- <!-- Please adjust the date whenever revising the manpage. -->
- <!ENTITY dhdate "<date>July 14, 2005</date>">
- <!ENTITY dhsection "<manvolnum>8</manvolnum>">
- <!ENTITY dhemail "<email>santiago at unicauca.edu.co</email>">
- <!ENTITY dhusername "Santiago Ruano Rincón">
- <!ENTITY dhucpackage "<refentrytitle>ztcfg</refentrytitle>">
- <!ENTITY dhpackage "ztcfg">
-
- <!ENTITY debian "<productname>Debian</productname>">
- <!ENTITY gnu "<acronym>GNU</acronym>">
- <!ENTITY gpl "&gnu; <acronym>GPL</acronym>">
-]>
-
-<refentry>
- <refentryinfo>
- <address>
- &dhemail;
- </address>
- <author>
- &dhfirstname;
- &dhsurname;
- </author>
- <copyright>
- <year>2005</year>
- <holder>&dhusername;</holder>
- </copyright>
- &dhdate;
- </refentryinfo>
- <refmeta>
- &dhucpackage;
-
- &dhsection;
- </refmeta>
- <refnamediv>
- <refname>&dhpackage;</refname>
-
- <refpurpose>reads and loads zaptel.conf</refpurpose>
- </refnamediv>
-
- <refsynopsisdiv>
- <cmdsynopsis>
- <command>&dhpackage;</command>
- <arg choice='opt'><option>-c <replaceable>CFG_FILE</replaceable> </option></arg>
- <arg choice='opt'><option>-s</option></arg>
- <arg choice='opt'><option>-t</option></arg>
- <arg choice='opt'><option>-v</option><arg choice='opt' rep='repeat'><option>-v</option></arg></arg>
-
- </cmdsynopsis>
-
- <cmdsynopsis>
- <command>&dhpackage</command>
- <arg choice='opt'><option>-h</option></arg>
- </cmdsynopsis>
-
- </refsynopsisdiv>
-
- <refsect1>
- <title>DESCRIPTION</title>
-
- <para><command>ztcfg</command> configures zaptel interface cards
- from a config file.</para>
-
- <para>You generally need to run it with a valid configurations
- in order for zaptel modules to work properly.</para>
-
- </refsect1>
-
- <refsect1>
- <title>OPTIONS</title>
-
- <variablelist>
-
- <varlistentry>
- <term><option>-c</option> <replaceable>CFG_FILE</replaceable></term><listitem><para>Use an alternative configuration file instead of
- <filename>/etc/zaptel.conf</filename></para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>-s</option></term>
- <listitem>
- <para>Only shutdown spans.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>-t</option></term>
- <listitem>
- <para>Test mode. Don't do anything, just report what you
- wanted to do.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>-v</option></term>
- <listitem>
- <para>Be more verbose. Add extra v-s for extra verbosity.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>-h</option></term>
- <listitem>
- <para>Display a brief help about the usage of <command>&dhpackage</command></para>
- </listitem>
- </varlistentry>
-
- </variablelist>
-
- </refsect1>
-
-
- <refsect1>
- <title>FILES</title>
-
- <para><filename>/etc/zaptel.conf</filename> The default location for the configuration file.</para>
-
- </refsect1>
-
- <refsect1>
- <title>SEE ALSO</title>
-
- <para>zttool(8), ztmonitor(8), asterisk(8).</para>
-
- </refsect1>
- <refsect1>
- <title>AUTHOR</title>
-
- <para>This manual page was written by &dhusername; &dhemail; for
- the &debian; system (but may be used by others). Permission is
- granted to copy, distribute and/or modify this document under
- the terms of the &gnu; General Public License, Version 2 any
- later version published by the Free Software Foundation.
- </para>
- <para>
- On Debian systems, the complete text of the GNU General Public
- License can be found in /usr/share/common-licenses/GPL.
- </para>
-
- </refsect1>
-</refentry>
-
-<!-- Keep this comment at the end of the file
-Local variables:
-mode: sgml
-sgml-omittag:t
-sgml-shorttag:t
-sgml-minimize-attributes:nil
-sgml-always-quote-attributes:t
-sgml-indent-step:2
-sgml-indent-data:t
-sgml-parent-document:nil
-sgml-default-dtd-file:nil
-sgml-exposed-tags:nil
-sgml-local-catalogs:nil
-sgml-local-ecat-files:nil
-End:
--->
-
-
Deleted: zaptel/trunk/debian/ztmonitor.sgml
===================================================================
--- zaptel/trunk/debian/ztmonitor.sgml 2007-01-20 19:53:28 UTC (rev 3042)
+++ zaptel/trunk/debian/ztmonitor.sgml 2007-01-20 20:16:12 UTC (rev 3043)
@@ -1,133 +0,0 @@
-<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
-
-<!-- Man page for the ztmonitor command of the zaptel package -->
-
-
- <!ENTITY dhfirstname "<firstname>Santiago</firstname>">
- <!ENTITY dhsurname "<surname>Ruano Rincón</surname>">
- <!-- Please adjust the date whenever revising the manpage. -->
- <!ENTITY dhdate "<date>July 14, 2005</date>">
- <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
- allowed: see man(7), man(1). -->
- <!ENTITY dhsection "<manvolnum>8</manvolnum>">
- <!ENTITY dhemail "<email>santiago at unicauca.edu.co</email>">
- <!ENTITY dhusername "Santiago Ruano Rincón">
- <!ENTITY dhucpackage "<refentrytitle>ztmonitor</refentrytitle>">
- <!ENTITY dhpackage "ztmonitor">
-
- <!ENTITY debian "<productname>Debian</productname>">
- <!ENTITY gnu "<acronym>GNU</acronym>">
- <!ENTITY gpl "&gnu; <acronym>GPL</acronym>">
-]>
-
-<refentry>
- <refentryinfo>
- <address>
- &dhemail;
- </address>
- <author>
- &dhfirstname;
- &dhsurname;
- </author>
- <copyright>
- <year>2005</year>
- <holder>&dhusername;</holder>
- </copyright>
- &dhdate;
- </refentryinfo>
- <refmeta>
- &dhucpackage;
-
- &dhsection;
- </refmeta>
- <refnamediv>
- <refname>&dhpackage;</refname>
-
- <refpurpose>checks the rx/tx levels of the zaptel
- inteface cards.</refpurpose>
- </refnamediv>
- <refsynopsisdiv>
- <cmdsynopsis>
- <command>&dhpackage; </command>
- <arg choice='req' ><option>channel number</option></arg>
- <arg><option>-v</option></arg>
- <arg><option>-f <replaceable>FILE</replaceable></option></arg>
- </cmdsynopsis>
- </refsynopsisdiv>
- <refsect1>
- <title>DESCRIPTION</title>
-
- <para>&dhpackage; monitors a zaptel channel. It gives you a visual
- representation of the sound strengths and makes it easy to see if
- the received or transmitted signals are too high or out of
- balance</para>
-
-
- </refsect1>
-
- <refsect1>
- <title>OPTIONS</title>
-
- <para>The first (mandatory) parameter is the number of the channel
- to monitor.</para>
-
- <variablelist>
- <varlistentry>
- <term>
- <option>-v</option>
- </term>
- <listitem>
- <para>Display visual audio levels.</para>
- </listitem>
- </varlistentry>
- <varlistentry>
- <term>
- <option>-f <replaceable>FILE</replaceable></option>
- </term>
- <listitem>
- <para>Write output to FILE</para>
- </listitem>
- </varlistentry>
- </variablelist>
- </refsect1>
- <refsect1>
- <title>SEE ALSO</title>
-
- <para>zttool(8), ztcfg(8), asterisk(8).</para>
-
- </refsect1>
- <refsect1>
- <title>AUTHOR</title>
-
- <para>This manual page was written by &dhusername; &dhemail; for
- the &debian; system (but may be used by others). Permission is
- granted to copy, distribute and/or modify this document under
- the terms of the &gnu; General Public License, Version 2 any
- later version published by the Free Software Foundation.
- </para>
- <para>
- On Debian systems, the complete text of the GNU General Public
- License can be found in /usr/share/common-licenses/GPL.
- </para>
-
- </refsect1>
-</refentry>
-
-<!-- Keep this comment at the end of the file
-Local variables:
-mode: sgml
-sgml-omittag:t
-sgml-shorttag:t
-sgml-minimize-attributes:nil
-sgml-always-quote-attributes:t
-sgml-indent-step:2
-sgml-indent-data:t
-sgml-parent-document:nil
-sgml-default-dtd-file:nil
-sgml-exposed-tags:nil
-sgml-local-catalogs:nil
-sgml-local-ecat-files:nil
-End:
--->
-
-
Deleted: zaptel/trunk/debian/ztspeed.8
===================================================================
--- zaptel/trunk/debian/ztspeed.8 2007-01-20 19:53:28 UTC (rev 3042)
+++ zaptel/trunk/debian/ztspeed.8 2007-01-20 20:16:12 UTC (rev 3043)
@@ -1,26 +0,0 @@
-.TH ztspeed 8 "2005-06-25"
-.SH NAME
-ztspeed \(em A generic speed test
-.SH SYNOPSIS
-.B ztspeed
-
-.SH DESCRIPTION
-.B ztspeed
-runs a simple 100% CPU loop for 5 seconds to see how many loops are
-performed. Used to measure how much CPU zaptel \fBreally\fR is taking.
-
-.SH OPTIONS
-None. Nothing else to see.
-
-.SH SEE ALSO
-zttool(8), ztmonitor(8), zttest(8), ztcfg(8), asterisk(8).
-
-.SH AUTHOR
-
-This manual page was written by Tzafrir Cohen <tzafrir.cohen at xorcom.com>
-Permission is granted to copy, distribute and/or modify this document under
-the terms of the GNU General Public License, Version 2 any
-later version published by the Free Software Foundation.
-
-On Debian systems, the complete text of the GNU General Public
-License can be found in /usr/share/common-licenses/GPL.
Deleted: zaptel/trunk/debian/zttest.8
===================================================================
--- zaptel/trunk/debian/zttest.8 2007-01-20 19:53:28 UTC (rev 3042)
+++ zaptel/trunk/debian/zttest.8 2007-01-20 20:16:12 UTC (rev 3043)
@@ -1,45 +0,0 @@
-.TH zttest 8 "2005-06-25"
-.SH "NAME"
-zttest \(em Test if the zaptel timer provides timely response
-.SH "SYNOPSIS"
-.B zttest
-.I [ -v ]
-
-.SH "DESCRIPTION"
-.B zttest
-zttest runs a timing test in a loop and prints the result of each loop.
-The test is as follows:
-
-It reads 8192 bytes from the zaptel timer device (\fI/dev/zap/pseudo\fR).
-This should take exactly 8000 ms . It uses calls to
-.I gettimeofday(2)
-before and after that read to check that indeed exactly 8000ms have passed.
-
-Values of 100% and 99.99% Are normally considered a definite
-.I pass.
-Values of 99.98% and 99.97% are probably OK as well.
-
-.SH OPTIONS
-.B -v
-.RS
-Be more verbose: print one line per test.
-.RE
-
-.SH FILES
-.B /dev/zap/pseudo
-.RS
-.RE
-The device file used to access the zaptel timer.
-
-.SH SEE ALSO
-zttool(8), ztmonitor(8), ztspeed(8), ztcfg(8), asterisk(8). gettimeofday(2)
-
-.SH AUTHOR
-
-This manual page was written by Tzafrir Cohen <tzafrir.cohen at xorcom.com>
-Permission is granted to copy, distribute and/or modify this document under
-the terms of the GNU General Public License, Version 2 any
-later version published by the Free Software Foundation.
-
-On Debian systems, the complete text of the GNU General Public
-License can be found in /usr/share/common-licenses/GPL.
Deleted: zaptel/trunk/debian/zttool.sgml
===================================================================
--- zaptel/trunk/debian/zttool.sgml 2007-01-20 19:53:28 UTC (rev 3042)
+++ zaptel/trunk/debian/zttool.sgml 2007-01-20 20:16:12 UTC (rev 3043)
@@ -1,104 +0,0 @@
-<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
-
-<!-- Man page for the zttool command of the zaptel package -->
-
-
- <!ENTITY dhfirstname "<firstname>Santiago</firstname>">
- <!ENTITY dhsurname "<surname>Ruano Rincón</surname>">
- <!-- Please adjust the date whenever revising the manpage. -->
- <!ENTITY dhdate "<date>July 14, 2005</date>">
- <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
- allowed: see man(7), man(1). -->
- <!ENTITY dhsection "<manvolnum>8</manvolnum>">
- <!ENTITY dhemail "<email>santiago at unicauca.edu.co</email>">
- <!ENTITY dhusername "Santiago Ruano Rincón">
- <!ENTITY dhucpackage "<refentrytitle>zttool</refentrytitle>">
- <!ENTITY dhpackage "zttool">
-
- <!ENTITY debian "<productname>Debian</productname>">
- <!ENTITY gnu "<acronym>GNU</acronym>">
- <!ENTITY gpl "&gnu; <acronym>GPL</acronym>">
-]>
-
-<refentry>
- <refentryinfo>
- <address>
- &dhemail;
- </address>
- <author>
- &dhfirstname;
- &dhsurname;
- </author>
- <copyright>
- <year>2005</year>
- <holder>&dhusername;</holder>
- </copyright>
- &dhdate;
- </refentryinfo>
- <refmeta>
- &dhucpackage;
-
- &dhsection;
- </refmeta>
- <refnamediv>
- <refname>&dhpackage;</refname>
-
- <refpurpose>Zaptel Tool shows status of Digium's interface cards.</refpurpose>
- </refnamediv>
- <refsynopsisdiv>
- <cmdsynopsis>
- <command>&dhpackage;</command>
- </cmdsynopsis>
- </refsynopsisdiv>
- <refsect1>
- <title>DESCRIPTION</title>
-
- <para>zttool shows the current status the Digium Zaptel inteface
- cards plugged to the computer.</para>
-
- <para>It displays values like Current Alarms, SyncSource, Tx/Rx
- Levels for each Zaptel interface.</para>
-
- </refsect1>
-
- <refsect1>
- <title>SEE ALSO</title>
-
- <para>ztmonitor(8), asterisk (8).</para>
-
- </refsect1>
- <refsect1>
- <title>AUTHOR</title>
-
- <para>This manual page was written by &dhusername; &dhemail; for
- the &debian; system (but may be used by others). Permission is
- granted to copy, distribute and/or modify this document under
- the terms of the &gnu; General Public License, Version 2 any
- later version published by the Free Software Foundation.
- </para>
- <para>
- On Debian systems, the complete text of the GNU General Public
- License can be found in /usr/share/common-licenses/GPL.
- </para>
-
- </refsect1>
-</refentry>
-
-<!-- Keep this comment at the end of the file
-Local variables:
-mode: sgml
-sgml-omittag:t
-sgml-shorttag:t
-sgml-minimize-attributes:nil
-sgml-always-quote-attributes:t
-sgml-indent-step:2
-sgml-indent-data:t
-sgml-parent-document:nil
-sgml-default-dtd-file:nil
-sgml-exposed-tags:nil
-sgml-local-catalogs:nil
-sgml-local-ecat-files:nil
-End:
--->
-
-
More information about the Pkg-voip-commits
mailing list