[Pkg-voip-commits] r4812 - in /yxa/trunk/debian: changelog control patches/autoconf_gen.dpatch patches/erlang-auto-rel.dpatch patches/yxa_yaws_makefile.dpatch
mikma-guest at alioth.debian.org
mikma-guest at alioth.debian.org
Mon Nov 5 14:50:38 UTC 2007
Author: mikma-guest
Date: Mon Nov 5 14:50:38 2007
New Revision: 4812
URL: http://svn.debian.org/wsvn/pkg-voip/?sc=1&rev=4812
Log:
* Update Depends erlang (>= 1:11.b.5), and yaws (>= 1.73).
* Remove Conflicts: yaws
* New upstream release candidate version 1.0~rc2
* Update patches.
Modified:
yxa/trunk/debian/changelog
yxa/trunk/debian/control
yxa/trunk/debian/patches/autoconf_gen.dpatch
yxa/trunk/debian/patches/erlang-auto-rel.dpatch
yxa/trunk/debian/patches/yxa_yaws_makefile.dpatch
Modified: yxa/trunk/debian/changelog
URL: http://svn.debian.org/wsvn/pkg-voip/yxa/trunk/debian/changelog?rev=4812&op=diff
==============================================================================
--- yxa/trunk/debian/changelog (original)
+++ yxa/trunk/debian/changelog Mon Nov 5 14:50:38 2007
@@ -1,4 +1,4 @@
-yxa (1.0~rc1-1) UNRELEASED; urgency=low
+yxa (1.0~rc2-1) UNRELEASED; urgency=low
* Initial release (Closes: #377617)
-- Mikael Magnusson <mikma at users.sourceforge.net> Fri, 20 Apr 2007 22:31:23 +0200
Modified: yxa/trunk/debian/control
URL: http://svn.debian.org/wsvn/pkg-voip/yxa/trunk/debian/control?rev=4812&op=diff
==============================================================================
--- yxa/trunk/debian/control (original)
+++ yxa/trunk/debian/control Mon Nov 5 14:50:38 2007
@@ -12,10 +12,9 @@
Package: yxa
Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, erlang-base (>= 1:11.b.4)
- | erlang-base-hipe (>= 1:11.b.4), erlang-nox (>= 1:11.b.4), yaws (>= 1.68)
+Depends: ${shlibs:Depends}, ${misc:Depends}, erlang-base (>= 1:11.b.5)
+ | erlang-base-hipe (>= 1:11.b.5), erlang-nox (>= 1:11.b.5), yaws (>= 1.73)
Pre-Depends: adduser
-Conflicts: yaws (>= 1.69)
Description: SIP software written in Erlang
Yxa is SIP software written in Erlang (Erlang is a programming language
written by Ericsson).
Modified: yxa/trunk/debian/patches/autoconf_gen.dpatch
URL: http://svn.debian.org/wsvn/pkg-voip/yxa/trunk/debian/patches/autoconf_gen.dpatch?rev=4812&op=diff
==============================================================================
--- yxa/trunk/debian/patches/autoconf_gen.dpatch (original)
+++ yxa/trunk/debian/patches/autoconf_gen.dpatch Mon Nov 5 14:50:38 2007
@@ -5,33 +5,15 @@
## DP: No description.
@DPATCH@
-diff -urNad yxa-1.0~rc1~/aclocal.m4 yxa-1.0~rc1/aclocal.m4
---- yxa-1.0~rc1~/aclocal.m4 1970-01-01 01:00:00.000000000 +0100
-+++ yxa-1.0~rc1/aclocal.m4 2007-07-11 19:53:11.000000000 +0200
-@@ -0,0 +1,14 @@
-+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-+
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-+# 2005 Free Software Foundation, Inc.
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+# PARTICULAR PURPOSE.
-+
-+m4_include([m4/erlang.m4])
-diff -urNad yxa-1.0~rc1~/configure yxa-1.0~rc1/configure
---- yxa-1.0~rc1~/configure 2007-04-12 12:26:14.000000000 +0200
-+++ yxa-1.0~rc1/configure 2007-07-11 19:53:12.000000000 +0200
+diff -urNad yxa-1.0~rc2~/configure yxa-1.0~rc2/configure
+--- yxa-1.0~rc2~/configure 2007-10-17 17:37:39.000000000 +0200
++++ yxa-1.0~rc2/configure 2007-10-17 17:38:28.000000000 +0200
@@ -1,28 +1,57 @@
#! /bin/sh
- # From configure.ac Revision: 1595 .
+ # From configure.ac Revision: 1636 .
# Guess values for system-dependent variables and create Makefiles.
--# Generated by GNU Autoconf 2.59 for YXA 1.0rc1.
-+# Generated by GNU Autoconf 2.61 for YXA 1.0rc1.
+-# Generated by GNU Autoconf 2.59 for YXA 1.0rc2.
++# Generated by GNU Autoconf 2.61 for YXA 1.0rc2.
#
# Report bugs to <yxa-devel at lists.su.se>.
#
@@ -90,1146 +72,7 @@
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-@@ -32,8 +61,43 @@
- fi
-
-
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
- # Work around bugs in pre-3.0 UWIN ksh.
--$as_unset ENV MAIL MAILPATH
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
- PS1='$ '
- PS2='> '
- PS4='+ '
-@@ -47,18 +111,19 @@
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
-- $as_unset $as_var
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
- done
-
- # Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
--if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
- else
- as_basename=false
-@@ -66,157 +131,388 @@
-
-
- # Name of the executable.
--as_me=`$as_basename "$0" ||
-+as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)$' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X/"$0" |
-- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-- /^X\/\(\/\/\)$/{ s//\1/; q; }
-- /^X\/\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-
-+# CDPATH.
-+$as_unset CDPATH
-
--# PATH needs CR, and LINENO needs CR and PATH.
--# Avoid depending upon Character Ranges.
--as_cr_letters='abcdefghijklmnopqrstuvwxyz'
--as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
--as_cr_Letters=$as_cr_letters$as_cr_LETTERS
--as_cr_digits='0123456789'
--as_cr_alnum=$as_cr_Letters$as_cr_digits
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-- else
-- PATH_SEPARATOR=:
-- fi
-- rm -f conf$$.sh
-+if test "x$CONFIG_SHELL" = x; then
-+ if (eval ":") 2>/dev/null; then
-+ as_have_required=yes
-+else
-+ as_have_required=no
-+fi
-+
-+ if test $as_have_required = yes && (eval ":
-+(as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
- fi
-
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" || {
-- # Find who we are. Look in the path if we contain no path at all
-- # relative or not.
-- case $0 in
-- *[\\/]* ) as_myself=$0 ;;
-- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-
-- ;;
-- esac
-- # We did not find ourselves, most probably we were run as `sh COMMAND'
-- # in which case we are not to be found in the path.
-- if test "x$as_myself" = x; then
-- as_myself=$0
-- fi
-- if test ! -f "$as_myself"; then
-- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-- { (exit 1); exit 1; }; }
-- fi
-- case $CONFIG_SHELL in
-- '')
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+ as_lineno_1=\$LINENO
-+ as_lineno_2=\$LINENO
-+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-+") 2> /dev/null; then
-+ :
-+else
-+ as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for as_base in sh bash ksh sh5; do
-- case $as_dir in
-+ case $as_dir in
- /*)
-- if ("$as_dir/$as_base" -c '
-+ for as_base in sh bash ksh sh5; do
-+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-+ done;;
-+ esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+ for as_shell in $as_candidate_shells $SHELL; do
-+ # Try only shells that exist, to save several forks.
-+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+ { ("$as_shell") 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+_ASEOF
-+}; then
-+ CONFIG_SHELL=$as_shell
-+ as_have_required=yes
-+ if { "$as_shell" 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+(as_func_return () {
-+ (exit $1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = "$1" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test $exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-- CONFIG_SHELL=$as_dir/$as_base
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-- fi;;
-- esac
-- done
--done
--;;
-- esac
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-+
-+_ASEOF
-+}; then
-+ break
-+fi
-+
-+fi
-+
-+ done
-+
-+ if test "x$CONFIG_SHELL" != x; then
-+ for as_var in BASH_ENV ENV
-+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ done
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+fi
-+
-+
-+ if test $as_have_required = no; then
-+ echo This script requires a shell more modern than all the
-+ echo shells that I found on your system. Please install a
-+ echo modern shell, or manually run the script under such a
-+ echo shell if you do have one.
-+ { (exit 1); exit 1; }
-+fi
-+
-+
-+fi
-+
-+fi
-+
-+
-+
-+(eval "as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0") || {
-+ echo No shell found that supports shell functions.
-+ echo Please tell autoconf at gnu.org about your system,
-+ echo including any error possibly output before this
-+ echo message
-+}
-+
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
-- # line-number line before each line; the second 'sed' does the real
-- # work. The second script uses 'N' to pair each line-number line
-- # with the numbered line, and appends trailing '-' during
-- # substitution so that $LINENO is not a special case at line end.
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-- sed '=' <$as_myself |
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
- sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
- N
-- s,$,-,
-- : loop
-- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
-- s,-$,,
-- s,^['$as_cr_digits']*\n,,
-+ s/-\n.*//
- ' >$as_me.lineno &&
-- chmod +x $as_me.lineno ||
-+ chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
-- # original and so on. Autoconf is especially sensible to this).
-- . ./$as_me.lineno
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
- }
-
-
--case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-- *c*,-n*) ECHO_N= ECHO_C='
--' ECHO_T=' ' ;;
-- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
- esac
-
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
- rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
- echo >conf$$.file
- if ln -s conf$$.file conf$$ 2>/dev/null; then
-- # We could just check for DJGPP; but this test a) works b) is more generic
-- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-- if test -f conf$$.exe; then
-- # Don't use ln at all; we don't have any links
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-- else
-- as_ln_s='ln -s'
-- fi
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
--rm -f conf$$ conf$$.exe conf$$.file
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-
- if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-@@ -225,7 +521,28 @@
- as_mkdir_p=false
- fi
-
--as_executable_p="test -f"
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-
- # Sed expression to map a string onto a valid CPP name.
- as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-@@ -234,39 +551,27 @@
- as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
--# IFS
--# We need space, tab and new line, in precisely that order.
--as_nl='
--'
--IFS=" $as_nl"
--
--# CDPATH.
--$as_unset CDPATH
-
-+exec 7<&0 </dev/null 6>&1
-
- # Name of the host.
- # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
- # so uname gets run too.
- ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
--exec 6>&1
--
- #
- # Initializations.
- #
- ac_default_prefix=/usr/local
-+ac_clean_files=
- ac_config_libobj_dir=.
-+LIBOBJS=
- cross_compiling=no
- subdirs=
- MFLAGS=
- MAKEFLAGS=
- SHELL=${CONFIG_SHELL-/bin/sh}
-
--# Maximum number of lines to put in a shell here document.
--# This variable seems obsolete. It should probably be removed, and
--# only ac_max_sed_lines should be used.
--: ${ac_max_here_lines=38}
--
- # Identity of this package.
- PACKAGE_NAME='YXA'
- PACKAGE_TARNAME='yxa'
-@@ -275,8 +580,90 @@
- PACKAGE_BUGREPORT='yxa-devel at lists.su.se'
-
- ac_unique_file="src/incomingproxy.erl"
--ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA ERL ac_pt_ERL ERLC ac_pt_ERLC DESTDIR mnesiadir sslcertdir local_module LIBOBJS LTLIBOBJS'
-+ac_subst_vars='SHELL
-+PATH_SEPARATOR
-+PACKAGE_NAME
-+PACKAGE_TARNAME
-+PACKAGE_VERSION
-+PACKAGE_STRING
-+PACKAGE_BUGREPORT
-+exec_prefix
-+prefix
-+program_transform_name
-+bindir
-+sbindir
-+libexecdir
-+datarootdir
-+datadir
-+sysconfdir
-+sharedstatedir
-+localstatedir
-+includedir
-+oldincludedir
-+docdir
-+infodir
-+htmldir
-+dvidir
-+pdfdir
-+psdir
-+libdir
-+localedir
-+mandir
-+DEFS
-+ECHO_C
-+ECHO_N
-+ECHO_T
-+LIBS
-+build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+CPPFLAGS
-+ac_ct_CC
-+EXEEXT
-+OBJEXT
-+INSTALL_PROGRAM
-+INSTALL_SCRIPT
-+INSTALL_DATA
-+ERLC
-+ERLCFLAGS
-+ERL
-+ERLANG_INSTALL_LIB_DIR
-+ERLANG_LIB_DIR_asn1
-+ERLANG_LIB_VER_asn1
-+ERLANG_LIB_DIR_kernel
-+ERLANG_LIB_VER_kernel
-+ERLANG_LIB_DIR_mnesia
-+ERLANG_LIB_VER_mnesia
-+ERLANG_LIB_DIR_ssl
-+ERLANG_LIB_VER_ssl
-+ERLANG_LIB_DIR_stdlib
-+ERLANG_LIB_VER_stdlib
-+ERLANG_LIB_DIR_yaws
-+ERLANG_LIB_VER_yaws
-+ERLANG_LIB_VER_SUBST
-+DESTDIR
-+mnesiadir
-+sslcertdir
-+local_module
-+LIBOBJS
-+LTLIBOBJS'
- ac_subst_files=''
-+ ac_precious_vars='build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+LIBS
-+CPPFLAGS
-+ERLC
-+ERLCFLAGS
-+ERL
-+ERLANG_INSTALL_LIB_DIR'
-+
-
- # Initialize some variables set by options.
- ac_init_help=
-@@ -303,34 +690,48 @@
- # and all the variables that are supposed to be based on exec_prefix
- # by default will actually change.
- # Use braces instead of parens because sh, perl, etc. also accept them.
-+# (The list follows the same order as the GNU Coding Standards.)
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
--datadir='${prefix}/share'
-+datarootdir='${prefix}/share'
-+datadir='${datarootdir}'
- sysconfdir='${prefix}/etc'
- sharedstatedir='${prefix}/com'
- localstatedir='${prefix}/var'
--libdir='${exec_prefix}/lib'
- includedir='${prefix}/include'
- oldincludedir='/usr/include'
--infodir='${prefix}/info'
--mandir='${prefix}/man'
-+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-+infodir='${datarootdir}/info'
-+htmldir='${docdir}'
-+dvidir='${docdir}'
-+pdfdir='${docdir}'
-+psdir='${docdir}'
-+libdir='${exec_prefix}/lib'
-+localedir='${datarootdir}/locale'
-+mandir='${datarootdir}/man'
-
- ac_prev=
-+ac_dashdash=
- for ac_option
- do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
-- eval "$ac_prev=\$ac_option"
-+ eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
-- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-+ case $ac_option in
-+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-+ *) ac_optarg=yes ;;
-+ esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
-- case $ac_option in
-+ case $ac_dashdash$ac_option in
-+ --)
-+ ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
-@@ -352,33 +753,45 @@
- --config-cache | -C)
- cache_file=config.cache ;;
-
-- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-+ -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
-- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-- | --da=*)
-+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
-+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-+ | --dataroo | --dataro | --datar)
-+ ac_prev=datarootdir ;;
-+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-+ datarootdir=$ac_optarg ;;
-+
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-- eval "enable_$ac_feature=no" ;;
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=no ;;
-+
-+ -docdir | --docdir | --docdi | --doc | --do)
-+ ac_prev=docdir ;;
-+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-+ docdir=$ac_optarg ;;
-+
-+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-+ ac_prev=dvidir ;;
-+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-+ dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-- case $ac_option in
-- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-- *) ac_optarg=yes ;;
-- esac
-- eval "enable_$ac_feature='$ac_optarg'" ;;
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-@@ -405,6 +818,12 @@
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
-+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-+ ac_prev=htmldir ;;
-+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-+ | --ht=*)
-+ htmldir=$ac_optarg ;;
-+
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
-@@ -429,13 +848,16 @@
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
-+ -localedir | --localedir | --localedi | --localed | --locale)
-+ ac_prev=localedir ;;
-+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-+ localedir=$ac_optarg ;;
-+
- -localstatedir | --localstatedir | --localstatedi | --localstated \
-- | --localstate | --localstat | --localsta | --localst \
-- | --locals | --local | --loca | --loc | --lo)
-+ | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-@@ -500,6 +922,16 @@
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
-+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-+ ac_prev=pdfdir ;;
-+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-+ pdfdir=$ac_optarg ;;
-+
-+ -psdir | --psdir | --psdi | --psd | --ps)
-+ ac_prev=psdir ;;
-+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-+ psdir=$ac_optarg ;;
-+
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-@@ -552,24 +984,20 @@
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- case $ac_option in
-- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-- *) ac_optarg=yes ;;
-- esac
-- eval "with_$ac_package='$ac_optarg'" ;;
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package | sed 's/-/_/g'`
-- eval "with_$ac_package=no" ;;
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=no ;;
-
- --x)
- # Obsolete; use --with-x.
-@@ -600,8 +1028,7 @@
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
-- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-- eval "$ac_envvar='$ac_optarg'"
-+ eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
-@@ -621,27 +1048,19 @@
- { (exit 1); exit 1; }; }
- fi
-
--# Be sure to have absolute paths.
--for ac_var in exec_prefix prefix
--do
-- eval ac_val=$`echo $ac_var`
-- case $ac_val in
-- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-- { (exit 1); exit 1; }; };;
-- esac
--done
--
--# Be sure to have absolute paths.
--for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-- localstatedir libdir includedir oldincludedir infodir mandir
-+# Be sure to have absolute directory names.
-+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
-+ datadir sysconfdir sharedstatedir localstatedir includedir \
-+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-+ libdir localedir mandir
- do
-- eval ac_val=$`echo $ac_var`
-+ eval ac_val=\$$ac_var
- case $ac_val in
-- [\\/$]* | ?:[\\/]* ) ;;
-- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-- { (exit 1); exit 1; }; };;
-+ [\\/$]* | ?:[\\/]* ) continue;;
-+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
-+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; }
- done
-
- # There might be people who depend on the old broken behavior: `$host'
-@@ -668,70 +1087,76 @@
- test "$silent" = yes && exec 6>/dev/null
-
-
-+ac_pwd=`pwd` && test -n "$ac_pwd" &&
-+ac_ls_di=`ls -di .` &&
-+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-+ { echo "$as_me: error: Working directory cannot be determined" >&2
-+ { (exit 1); exit 1; }; }
-+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-+ { echo "$as_me: error: pwd does not report name of working directory" >&2
-+ { (exit 1); exit 1; }; }
-+
-+
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
-- # Try the directory containing this script, then its parent.
-- ac_confdir=`(dirname "$0") 2>/dev/null ||
-+ # Try the directory containing this script, then the parent directory.
-+ ac_confdir=`$as_dirname -- "$0" ||
- $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$0" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
- srcdir=$ac_confdir
-- if test ! -r $srcdir/$ac_unique_file; then
-+ if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
- else
- ac_srcdir_defaulted=no
- fi
--if test ! -r $srcdir/$ac_unique_file; then
-- if test "$ac_srcdir_defaulted" = yes; then
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-- { (exit 1); exit 1; }; }
-- else
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+if test ! -r "$srcdir/$ac_unique_file"; then
-+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
-- fi
- fi
--(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-+ac_abs_confdir=`(
-+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
--srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
--ac_env_build_alias_set=${build_alias+set}
--ac_env_build_alias_value=$build_alias
--ac_cv_env_build_alias_set=${build_alias+set}
--ac_cv_env_build_alias_value=$build_alias
--ac_env_host_alias_set=${host_alias+set}
--ac_env_host_alias_value=$host_alias
--ac_cv_env_host_alias_set=${host_alias+set}
--ac_cv_env_host_alias_value=$host_alias
--ac_env_target_alias_set=${target_alias+set}
--ac_env_target_alias_value=$target_alias
--ac_cv_env_target_alias_set=${target_alias+set}
--ac_cv_env_target_alias_value=$target_alias
--ac_env_CC_set=${CC+set}
--ac_env_CC_value=$CC
--ac_cv_env_CC_set=${CC+set}
--ac_cv_env_CC_value=$CC
--ac_env_CFLAGS_set=${CFLAGS+set}
--ac_env_CFLAGS_value=$CFLAGS
--ac_cv_env_CFLAGS_set=${CFLAGS+set}
--ac_cv_env_CFLAGS_value=$CFLAGS
--ac_env_LDFLAGS_set=${LDFLAGS+set}
--ac_env_LDFLAGS_value=$LDFLAGS
--ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
--ac_cv_env_LDFLAGS_value=$LDFLAGS
--ac_env_CPPFLAGS_set=${CPPFLAGS+set}
--ac_env_CPPFLAGS_value=$CPPFLAGS
--ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
--ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-+ pwd)`
-+# When building in place, set srcdir=.
-+if test "$ac_abs_confdir" = "$ac_pwd"; then
-+ srcdir=.
-+fi
-+# Remove unnecessary trailing slashes from srcdir.
-+# Double slashes in file names in object file debugging info
-+# mess up M-x gdb in Emacs.
-+case $srcdir in
-+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-+esac
-+for ac_var in $ac_precious_vars; do
-+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_env_${ac_var}_value=\$${ac_var}
-+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
-+done
-
- #
- # Report the --help message.
-@@ -760,9 +1185,6 @@
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
--_ACEOF
--
-- cat <<_ACEOF
- Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
-@@ -780,15 +1202,22 @@
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
-- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
-- --infodir=DIR info documentation [PREFIX/info]
-- --mandir=DIR man documentation [PREFIX/man]
-+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
-+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
-+ --infodir=DIR info documentation [DATAROOTDIR/info]
-+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
-+ --mandir=DIR man documentation [DATAROOTDIR/man]
-+ --docdir=DIR documentation root [DATAROOTDIR/doc/yxa]
-+ --htmldir=DIR html documentation [DOCDIR]
-+ --dvidir=DIR dvi documentation [DOCDIR]
-+ --pdfdir=DIR pdf documentation [DOCDIR]
-+ --psdir=DIR ps documentation [DOCDIR]
- _ACEOF
-
- cat <<\_ACEOF
-@@ -801,6 +1230,12 @@
- esac
- cat <<\_ACEOF
-
-+Optional Features:
-+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-+ --enable-erlang-version-check
-+ Check Erlang/OTP version [default=yes]
-+
- Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-@@ -815,128 +1250,101 @@
+@@ -1221,128 +1250,101 @@
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
@@ -1382,7 +225,7 @@
+test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
- YXA configure 1.0rc1
+ YXA configure 1.0rc2
-generated by GNU Autoconf 2.59
+generated by GNU Autoconf 2.61
@@ -1401,7 +244,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
- It was created by YXA $as_me 1.0rc1, which was
+ It was created by YXA $as_me 1.0rc2, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+generated by GNU Autoconf 2.61. Invocation command line was
@@ -1412,3314 +255,7 @@
{
cat <<_ASUNAME
## --------- ##
-@@ -955,7 +1363,7 @@
- /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
- /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
- /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
--hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
- /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
- /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
- /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-@@ -969,6 +1377,7 @@
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
- done
-+IFS=$as_save_IFS
-
- } >&5
-
-@@ -990,7 +1399,6 @@
- ac_configure_args=
- ac_configure_args0=
- ac_configure_args1=
--ac_sep=
- ac_must_keep_next=false
- for ac_pass in 1 2
- do
-@@ -1001,7 +1409,7 @@
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
-@@ -1023,9 +1431,7 @@
- -* ) ac_must_keep_next=true ;;
- esac
- fi
-- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-- # Get rid of the leading space.
-- ac_sep=" "
-+ ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-@@ -1036,8 +1442,8 @@
- # When interrupted or exit'd, cleanup temporary files, and complete
- # config.log. We remove comments because anyway the quotes in there
- # would cause problems or look ugly.
--# WARNING: Be sure not to use single quotes in there, as some shells,
--# such as our DU 5.0 friend, will then `close' the trap.
-+# WARNING: Use '\'' to represent an apostrophe within the trap.
-+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
- trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
-@@ -1050,20 +1456,34 @@
- _ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
--{
-+(
-+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
- (set) 2>&1 |
-- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
- sed -n \
-- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-- ;;
-+ "s/'\''/'\''\\\\'\'''\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-+ ;; #(
- *)
-- sed -n \
-- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
-- esac;
--}
-+ esac |
-+ sort
-+)
- echo
-
- cat <<\_ASBOX
-@@ -1074,22 +1494,28 @@
- echo
- for ac_var in $ac_subst_vars
- do
-- eval ac_val=$`echo $ac_var`
-- echo "$ac_var='"'"'$ac_val'"'"'"
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
--## ------------- ##
--## Output files. ##
--## ------------- ##
-+## ------------------- ##
-+## File substitutions. ##
-+## ------------------- ##
- _ASBOX
- echo
- for ac_var in $ac_subst_files
- do
-- eval ac_val=$`echo $ac_var`
-- echo "$ac_var='"'"'$ac_val'"'"'"
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-@@ -1101,26 +1527,24 @@
- ## ----------- ##
- _ASBOX
- echo
-- sed "/^$/d" confdefs.h | sort
-+ cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
-- rm -f core *.core &&
-- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-+ rm -f core *.core core.conftest.* &&
-+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-- ' 0
-+' 0
- for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
- done
- ac_signal=0
-
- # confdefs.h avoids OS command line length limits that DEFS can exceed.
--rm -rf conftest* confdefs.h
--# AIX cpp loses on an empty file, so make sure it contains at least a newline.
--echo >confdefs.h
-+rm -f -r conftest* confdefs.h
-
- # Predefined preprocessor variables.
-
-@@ -1151,14 +1575,17 @@
-
- # Let the site file select an alternate cache file if it wants to.
- # Prefer explicitly selected file to automatically selected ones.
--if test -z "$CONFIG_SITE"; then
-- if test "x$prefix" != xNONE; then
-- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-- else
-- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-- fi
-+if test -n "$CONFIG_SITE"; then
-+ set x "$CONFIG_SITE"
-+elif test "x$prefix" != xNONE; then
-+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
-+else
-+ set x "$ac_default_prefix/share/config.site" \
-+ "$ac_default_prefix/etc/config.site"
- fi
--for ac_site_file in $CONFIG_SITE; do
-+shift
-+for ac_site_file
-+do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
- echo "$as_me: loading site script $ac_site_file" >&6;}
-@@ -1174,8 +1601,8 @@
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
- echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
-- [\\/]* | ?:[\\/]* ) . $cache_file;;
-- *) . ./$cache_file;;
-+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
-+ *) . "./$cache_file";;
- esac
- fi
- else
-@@ -1187,12 +1614,11 @@
- # Check that the precious variables saved in the cache have kept the same
- # value.
- ac_cache_corrupted=false
--for ac_var in `(set) 2>&1 |
-- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-+for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
-- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-- eval ac_new_val="\$ac_env_${ac_var}_value"
-+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
-+ eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-@@ -1217,8 +1643,7 @@
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
-@@ -1235,12 +1660,6 @@
- { (exit 1); exit 1; }; }
- fi
-
--ac_ext=c
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
--ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
--ac_compiler_gnu=$ac_cv_c_compiler_gnu
--
-
-
-
-@@ -1265,34 +1684,45 @@
-
-
-
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
- REQUIRE_ERLANG="5.5.4 (Erlang/OTP R11B-4)"
-
- ac_aux_dir=
--for ac_dir in scripts $srcdir/scripts; do
-- if test -f $ac_dir/install-sh; then
-+for ac_dir in scripts "$srcdir"/scripts; do
-+ if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
-- elif test -f $ac_dir/install.sh; then
-+ elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
-- elif test -f $ac_dir/shtool; then
-+ elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
- done
- if test -z "$ac_aux_dir"; then
-- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in scripts $srcdir/scripts" >&5
--echo "$as_me: error: cannot find install-sh or install.sh in scripts $srcdir/scripts" >&2;}
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in scripts \"$srcdir\"/scripts" >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in scripts \"$srcdir\"/scripts" >&2;}
- { (exit 1); exit 1; }; }
- fi
--ac_config_guess="$SHELL $ac_aux_dir/config.guess"
--ac_config_sub="$SHELL $ac_aux_dir/config.sub"
--ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-+
-+# These three variables are undocumented and unsupported,
-+# and are intended to be withdrawn in a future Autoconf release.
-+# They can cause serious problems if a builder's source tree is in a directory
-+# whose full name contains unusual characters.
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-+
-
-
- ac_ext=c
-@@ -1303,8 +1733,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}gcc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1317,32 +1747,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1355,36 +1787,51 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- CC=$ac_ct_CC
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
- else
- CC="$ac_cv_prog_CC"
- fi
-
- if test -z "$CC"; then
-- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1397,74 +1844,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
--else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
--fi
--
--fi
--if test -z "$ac_cv_prog_CC"; then
-- ac_ct_CC=$CC
-- # Extract the first word of "cc", so it can be a program name with args.
--set dummy cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- if test -n "$ac_ct_CC"; then
-- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
--else
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-- ac_cv_prog_ac_ct_CC="cc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-- break 2
-- fi
--done
--done
--
--fi
--fi
--ac_ct_CC=$ac_cv_prog_ac_ct_CC
--if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- CC=$ac_ct_CC
--else
-- CC="$ac_cv_prog_CC"
--fi
-
-+ fi
- fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1478,7 +1885,7 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
-@@ -1489,6 +1896,7 @@
- fi
- done
- done
-+IFS=$as_save_IFS
-
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
-@@ -1506,22 +1914,23 @@
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
-- for ac_prog in cl
-+ for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1534,36 +1943,38 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- test -n "$CC" && break
- done
- fi
- if test -z "$CC"; then
- ac_ct_CC=$CC
-- for ac_prog in cl
-+ for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1576,29 +1987,45 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- test -n "$ac_ct_CC" && break
- done
-
-- CC=$ac_ct_CC
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
- fi
-
- fi
-@@ -1611,21 +2038,35 @@
- { (exit 1); exit 1; }; }
-
- # Provide some information about the compiler.
--echo "$as_me:$LINENO:" \
-- "checking for C compiler version" >&5
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
- ac_compiler=`set X $ac_compile; echo $2`
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-- (eval $ac_compiler --version </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-- (eval $ac_compiler -v </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-- (eval $ac_compiler -V </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-@@ -1650,47 +2091,77 @@
- # Try to create an executable without -o first, disregard a.out.
- # It will help us diagnose broken compilers, and finding out an intuition
- # of exeext.
--echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
--echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
- ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
--if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-- (eval $ac_link_default) 2>&5
-+#
-+# List of possible output files, starting from the most likely.
-+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-+# only as a last resort. b.out is created by i960 compilers.
-+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-+#
-+# The IRIX 6 linker writes into existing files which may not be
-+# executable, retaining their permissions. Remove them first so a
-+# subsequent execution test works.
-+ac_rmfiles=
-+for ac_file in $ac_files
-+do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-+ esac
-+done
-+rm -f $ac_rmfiles
-+
-+if { (ac_try="$ac_link_default"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link_default") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-- # Find the output, starting from the most likely. This scheme is
--# not robust to junk in `.', hence go to wildcards (a.*) only as a last
--# resort.
--
--# Be careful to initialize this variable, since it used to be cached.
--# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
--ac_cv_exeext=
--# b.out is created by i960 compilers.
--for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-+# in a Makefile. We should not override ac_cv_exeext if it was cached,
-+# so that the user can short-circuit this test for compilers unknown to
-+# Autoconf.
-+for ac_file in $ac_files ''
- do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-- ;;
-- conftest.$ac_ext )
-- # This is the source file.
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
-- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-- # FIXME: I believe we export ac_cv_exeext for Libtool,
-- # but it would be cool to find out if it's true. Does anybody
-- # maintain Libtool? --akim.
-- export ac_cv_exeext
-+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+ then :; else
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ fi
-+ # We set ac_cv_exeext here because the later test for it is not
-+ # safe: cross compilers may not add the suffix if given an `-o'
-+ # argument, so we may need to know it at that point already.
-+ # Even if this section looks crufty: it has the advantage of
-+ # actually working.
- break;;
- * )
- break;;
- esac
- done
-+test "$ac_cv_exeext" = no && ac_cv_exeext=
-+
- else
-+ ac_file=''
-+fi
-+
-+{ echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6; }
-+if test -z "$ac_file"; then
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-@@ -1702,19 +2173,21 @@
- fi
-
- ac_exeext=$ac_cv_exeext
--echo "$as_me:$LINENO: result: $ac_file" >&5
--echo "${ECHO_T}$ac_file" >&6
-
--# Check the compiler produces executables we can run. If not, either
-+# Check that the compiler produces executables we can run. If not, either
- # the compiler is broken, or we cross compile.
--echo "$as_me:$LINENO: checking whether the C compiler works" >&5
--echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
- # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
- # If not cross compiling, check that we can run a simple program.
- if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-@@ -1733,22 +2206,27 @@
- fi
- fi
- fi
--echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-
- rm -f a.out a.exe conftest$ac_cv_exeext b.out
- ac_clean_files=$ac_clean_files_save
--# Check the compiler produces executables we can run. If not, either
-+# Check that the compiler produces executables we can run. If not, either
- # the compiler is broken, or we cross compile.
--echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
--echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
--echo "$as_me:$LINENO: result: $cross_compiling" >&5
--echo "${ECHO_T}$cross_compiling" >&6
-+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6; }
-
--echo "$as_me:$LINENO: checking for suffix of executables" >&5
--echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-@@ -1759,9 +2237,8 @@
- for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-@@ -1775,14 +2252,14 @@
- fi
-
- rm -f conftest$ac_cv_exeext
--echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
--echo "${ECHO_T}$ac_cv_exeext" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
- rm -f conftest.$ac_ext
- EXEEXT=$ac_cv_exeext
- ac_exeext=$EXEEXT
--echo "$as_me:$LINENO: checking for suffix of object files" >&5
--echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
- if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1802,14 +2279,20 @@
- }
- _ACEOF
- rm -f conftest.o conftest.obj
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>&5
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-+ for ac_file in conftest.o conftest.obj conftest.*; do
-+ test -f "$ac_file" || continue;
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-@@ -1827,12 +2310,12 @@
-
- rm -f conftest.$ac_cv_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
--echo "${ECHO_T}$ac_cv_objext" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6; }
- OBJEXT=$ac_cv_objext
- ac_objext=$OBJEXT
--echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
--echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
- if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1855,50 +2338,49 @@
- }
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_compiler_gnu=no
-+ ac_compiler_gnu=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
--echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
- GCC=`test $ac_compiler_gnu = yes && echo yes`
- ac_test_CFLAGS=${CFLAGS+set}
- ac_save_CFLAGS=$CFLAGS
--CFLAGS="-g"
--echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
--echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
- if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
-+ ac_save_c_werror_flag=$ac_c_werror_flag
-+ ac_c_werror_flag=yes
-+ ac_cv_prog_cc_g=no
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
- _ACEOF
- cat confdefs.h >>conftest.$ac_ext
-@@ -1914,38 +2396,118 @@
- }
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ CFLAGS=""
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_cv_prog_cc_g=no
-+
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
-@@ -1961,12 +2523,12 @@
- CFLAGS=
- fi
- fi
--echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
--echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
--if test "${ac_cv_prog_cc_stdc+set}" = set; then
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_cv_prog_cc_stdc=no
-+ ac_cv_prog_cc_c89=no
- ac_save_CC=$CC
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2000,12 +2562,17 @@
- /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
-- as 'x'. The following induces an error, until -std1 is added to get
-+ as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
-- that's true only with -std1. */
-+ that's true only with -std. */
- int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+ inside strings and character constants. */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
- int test (int i, double x);
- struct s1 {int (*f) (int a);};
- struct s2 {int (*f) (double a);};
-@@ -2020,205 +2587,57 @@
- return 0;
- }
- _ACEOF
--# Don't try gcc -ansi; that turns off useful extensions and
--# breaks some systems' header files.
--# AIX -qlanglvl=ansi
--# Ultrix and OSF/1 -std1
--# HP-UX 10.20 and later -Ae
--# HP-UX older versions -Aa -D_HPUX_SOURCE
--# SVR4 -Xc -D__EXTENSIONS__
--for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
- do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_prog_cc_stdc=$ac_arg
--break
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_c89=$ac_arg
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-+
- fi
--rm -f conftest.err conftest.$ac_objext
-+
-+rm -f core conftest.err conftest.$ac_objext
-+ test "x$ac_cv_prog_cc_c89" != "xno" && break
- done
--rm -f conftest.$ac_ext conftest.$ac_objext
-+rm -f conftest.$ac_ext
- CC=$ac_save_CC
-
- fi
--
--case "x$ac_cv_prog_cc_stdc" in
-- x|xno)
-- echo "$as_me:$LINENO: result: none needed" >&5
--echo "${ECHO_T}none needed" >&6 ;;
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+ x)
-+ { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+ xno)
-+ { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
- *)
-- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-- CC="$CC $ac_cv_prog_cc_stdc" ;;
-+ CC="$CC $ac_cv_prog_cc_c89"
-+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
- esac
-
--# Some people use a C++ compiler to compile C. Since we use `exit',
--# in C++ we need to declare it. In case someone uses the same compiler
--# for both compiling C and C++ we need to have the C++ compiler decide
--# the declaration of exit, since it's the most demanding environment.
--cat >conftest.$ac_ext <<_ACEOF
--#ifndef __cplusplus
-- choke me
--#endif
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- for ac_declaration in \
-- '' \
-- 'extern "C" void std::exit (int) throw (); using std::exit;' \
-- 'extern "C" void std::exit (int); using std::exit;' \
-- 'extern "C" void exit (int) throw ();' \
-- 'extern "C" void exit (int);' \
-- 'void exit (int);'
--do
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_declaration
--#include <stdlib.h>
--int
--main ()
--{
--exit (42);
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- :
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--continue
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_declaration
--int
--main ()
--{
--exit (42);
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- break
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--done
--rm -f conftest*
--if test -n "$ac_declaration"; then
-- echo '#ifdef __cplusplus' >>confdefs.h
-- echo $ac_declaration >>confdefs.h
-- echo '#endif' >>confdefs.h
--fi
--
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-@@ -2238,8 +2657,8 @@
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
- # OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
--echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
--echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
- if test -z "$INSTALL"; then
- if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-@@ -2261,7 +2680,7 @@
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
-@@ -2280,21 +2699,22 @@
- ;;
- esac
- done
-+IFS=$as_save_IFS
-
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
-- # As a last resort, use the slow shell script. We don't cache a
-- # path for INSTALL within a source directory, because that will
-+ # As a last resort, use the slow shell script. Don't cache a
-+ # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
-- # removed, or if the path is relative.
-+ # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
- fi
--echo "$as_me:$LINENO: result: $INSTALL" >&5
--echo "${ECHO_T}$INSTALL" >&6
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
-@@ -2305,26 +2725,974 @@
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-- ac_config_files="$ac_config_files Makefile src/Makefile src/config/Makefile src/cpl/Makefile src/event/Makefile src/event_handler/Makefile src/include/Makefile src/local/Makefile src/mysql/Makefile src/eldap/Makefile src/database/Makefile src/transportlayer/Makefile src/sipuserdb/Makefile src/transactionlayer/Makefile yaws/src/Makefile"
-+if test -n "$ERLC"; then
-+ { echo "$as_me:$LINENO: checking for erlc" >&5
-+echo $ECHO_N "checking for erlc... $ECHO_C" >&6; }
-+ { echo "$as_me:$LINENO: result: $ERLC" >&5
-+echo "${ECHO_T}$ERLC" >&6; }
-+else
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}erlc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}erlc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_path_ERLC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $ERLC in
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_ERLC="$ERLC" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_path_ERLC="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-
-+ ;;
-+esac
-+fi
-+ERLC=$ac_cv_path_ERLC
-+if test -n "$ERLC"; then
-+ { echo "$as_me:$LINENO: result: $ERLC" >&5
-+echo "${ECHO_T}$ERLC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-
-
--# Check whether --with-erlang or --without-erlang was given.
-+fi
-+if test -z "$ac_cv_path_ERLC"; then
-+ ac_pt_ERLC=$ERLC
-+ # Extract the first word of "erlc", so it can be a program name with args.
-+set dummy erlc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_path_ac_pt_ERLC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $ac_pt_ERLC in
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_ac_pt_ERLC="$ac_pt_ERLC" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_path_ac_pt_ERLC="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+fi
-+ac_pt_ERLC=$ac_cv_path_ac_pt_ERLC
-+if test -n "$ac_pt_ERLC"; then
-+ { echo "$as_me:$LINENO: result: $ac_pt_ERLC" >&5
-+echo "${ECHO_T}$ac_pt_ERLC" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_pt_ERLC" = x; then
-+ ERLC="not found"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ ERLC=$ac_pt_ERLC
-+ fi
-+else
-+ ERLC="$ac_cv_path_ERLC"
-+fi
-+
-+fi
-+
-+if test "$ERLC" = "not found"; then
-+ { { echo "$as_me:$LINENO: error: Erlang/OTP compiler (erlc) not found but required" >&5
-+echo "$as_me: error: Erlang/OTP compiler (erlc) not found but required" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+if test -n "$ERL"; then
-+ { echo "$as_me:$LINENO: checking for erl" >&5
-+echo $ECHO_N "checking for erl... $ECHO_C" >&6; }
-+ { echo "$as_me:$LINENO: result: $ERL" >&5
-+echo "${ECHO_T}$ERL" >&6; }
-+else
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}erl", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}erl; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_path_ERL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $ERL in
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_ERL="$ERL" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_path_ERL="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+fi
-+ERL=$ac_cv_path_ERL
-+if test -n "$ERL"; then
-+ { echo "$as_me:$LINENO: result: $ERL" >&5
-+echo "${ECHO_T}$ERL" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_path_ERL"; then
-+ ac_pt_ERL=$ERL
-+ # Extract the first word of "erl", so it can be a program name with args.
-+set dummy erl; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_path_ac_pt_ERL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $ac_pt_ERL in
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_ac_pt_ERL="$ac_pt_ERL" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_path_ac_pt_ERL="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+fi
-+ac_pt_ERL=$ac_cv_path_ac_pt_ERL
-+if test -n "$ac_pt_ERL"; then
-+ { echo "$as_me:$LINENO: result: $ac_pt_ERL" >&5
-+echo "${ECHO_T}$ac_pt_ERL" >&6; }
-+else
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+ if test "x$ac_pt_ERL" = x; then
-+ ERL=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ ERL=$ac_pt_ERL
-+ fi
-+else
-+ ERL="$ac_cv_path_ERL"
-+fi
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP library installation base directory" >&5
-+echo $ECHO_N "checking for Erlang/OTP library installation base directory... $ECHO_C" >&6; }
-+
-+if test -n "$ERLANG_INSTALL_LIB_DIR"; then
-+ { echo "$as_me:$LINENO: result: $ERLANG_INSTALL_LIB_DIR" >&5
-+echo "${ECHO_T}$ERLANG_INSTALL_LIB_DIR" >&6; }
-+else
-+ ERLANG_INSTALL_LIB_DIR='${libdir}/erlang/lib'
-+
-+ { echo "$as_me:$LINENO: result: $libdir/erlang/lib" >&5
-+echo "${ECHO_T}$libdir/erlang/lib" >&6; }
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'asn1' library subdirectory" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'asn1' library subdirectory... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_dir_asn1+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=erl
-+ac_compile='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5'
-+ac_link='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5 ; echo "#!/bin/sh" > conftest$ac_exeext ; echo "\"$ERL\" -run conftest start -run init stop -noshell" >> conftest$ac_exeext ; chmod +x conftest$ac_exeext'
-+ if test "$cross_compiling" = yes; then
-+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+-module(conftest).
-+-export([start/0]).
-+
-+start() ->
-+ ReturnValue = case code:lib_dir("asn1") of
-+ {error, bad_name} ->
-+ file:write_file("conftest.out", "not found\n"),
-+ 1;
-+ LibDir ->
-+ file:write_file("conftest.out", LibDir),
-+ 0
-+ end,
-+ halt(ReturnValue)
-+.
-+
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ erlang_cv_lib_dir_asn1=`cat conftest.out`
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+if test ! -f conftest.out; then
-+ { { echo "$as_me:$LINENO: error: test Erlang program execution failed
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: test Erlang program execution failed
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ erlang_cv_lib_dir_asn1="not found"
-+ fi
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_dir_asn1" >&5
-+echo "${ECHO_T}$erlang_cv_lib_dir_asn1" >&6; }
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'asn1' library version" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'asn1' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_asn1+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$erlang_cv_lib_dir_asn1" = "not found"; then
-+ erlang_cv_lib_ver_asn1="not found"
-+else
-+ erlang_cv_lib_ver_asn1=`echo "$erlang_cv_lib_dir_asn1" | sed -n -e 's,^.*-\([^/-]*\)$,\1,p'`
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_asn1" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_asn1" >&6; }
-+ERLANG_LIB_DIR_asn1=$erlang_cv_lib_dir_asn1
-+
-+ERLANG_LIB_VER_asn1=$erlang_cv_lib_ver_asn1
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'kernel' library subdirectory" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'kernel' library subdirectory... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_dir_kernel+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=erl
-+ac_compile='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5'
-+ac_link='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5 ; echo "#!/bin/sh" > conftest$ac_exeext ; echo "\"$ERL\" -run conftest start -run init stop -noshell" >> conftest$ac_exeext ; chmod +x conftest$ac_exeext'
-+ if test "$cross_compiling" = yes; then
-+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+-module(conftest).
-+-export([start/0]).
-+
-+start() ->
-+ ReturnValue = case code:lib_dir("kernel") of
-+ {error, bad_name} ->
-+ file:write_file("conftest.out", "not found\n"),
-+ 1;
-+ LibDir ->
-+ file:write_file("conftest.out", LibDir),
-+ 0
-+ end,
-+ halt(ReturnValue)
-+.
-+
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ erlang_cv_lib_dir_kernel=`cat conftest.out`
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+if test ! -f conftest.out; then
-+ { { echo "$as_me:$LINENO: error: test Erlang program execution failed
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: test Erlang program execution failed
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ erlang_cv_lib_dir_kernel="not found"
-+ fi
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_dir_kernel" >&5
-+echo "${ECHO_T}$erlang_cv_lib_dir_kernel" >&6; }
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'kernel' library version" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'kernel' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_kernel+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$erlang_cv_lib_dir_kernel" = "not found"; then
-+ erlang_cv_lib_ver_kernel="not found"
-+else
-+ erlang_cv_lib_ver_kernel=`echo "$erlang_cv_lib_dir_kernel" | sed -n -e 's,^.*-\([^/-]*\)$,\1,p'`
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_kernel" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_kernel" >&6; }
-+ERLANG_LIB_DIR_kernel=$erlang_cv_lib_dir_kernel
-+
-+ERLANG_LIB_VER_kernel=$erlang_cv_lib_ver_kernel
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'mnesia' library subdirectory" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'mnesia' library subdirectory... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_dir_mnesia+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=erl
-+ac_compile='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5'
-+ac_link='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5 ; echo "#!/bin/sh" > conftest$ac_exeext ; echo "\"$ERL\" -run conftest start -run init stop -noshell" >> conftest$ac_exeext ; chmod +x conftest$ac_exeext'
-+ if test "$cross_compiling" = yes; then
-+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+-module(conftest).
-+-export([start/0]).
-+
-+start() ->
-+ ReturnValue = case code:lib_dir("mnesia") of
-+ {error, bad_name} ->
-+ file:write_file("conftest.out", "not found\n"),
-+ 1;
-+ LibDir ->
-+ file:write_file("conftest.out", LibDir),
-+ 0
-+ end,
-+ halt(ReturnValue)
-+.
-+
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ erlang_cv_lib_dir_mnesia=`cat conftest.out`
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+if test ! -f conftest.out; then
-+ { { echo "$as_me:$LINENO: error: test Erlang program execution failed
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: test Erlang program execution failed
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ erlang_cv_lib_dir_mnesia="not found"
-+ fi
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_dir_mnesia" >&5
-+echo "${ECHO_T}$erlang_cv_lib_dir_mnesia" >&6; }
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'mnesia' library version" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'mnesia' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_mnesia+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$erlang_cv_lib_dir_mnesia" = "not found"; then
-+ erlang_cv_lib_ver_mnesia="not found"
-+else
-+ erlang_cv_lib_ver_mnesia=`echo "$erlang_cv_lib_dir_mnesia" | sed -n -e 's,^.*-\([^/-]*\)$,\1,p'`
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_mnesia" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_mnesia" >&6; }
-+ERLANG_LIB_DIR_mnesia=$erlang_cv_lib_dir_mnesia
-+
-+ERLANG_LIB_VER_mnesia=$erlang_cv_lib_ver_mnesia
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'ssl' library subdirectory" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'ssl' library subdirectory... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_dir_ssl+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=erl
-+ac_compile='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5'
-+ac_link='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5 ; echo "#!/bin/sh" > conftest$ac_exeext ; echo "\"$ERL\" -run conftest start -run init stop -noshell" >> conftest$ac_exeext ; chmod +x conftest$ac_exeext'
-+ if test "$cross_compiling" = yes; then
-+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+-module(conftest).
-+-export([start/0]).
-+
-+start() ->
-+ ReturnValue = case code:lib_dir("ssl") of
-+ {error, bad_name} ->
-+ file:write_file("conftest.out", "not found\n"),
-+ 1;
-+ LibDir ->
-+ file:write_file("conftest.out", LibDir),
-+ 0
-+ end,
-+ halt(ReturnValue)
-+.
-+
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ erlang_cv_lib_dir_ssl=`cat conftest.out`
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+if test ! -f conftest.out; then
-+ { { echo "$as_me:$LINENO: error: test Erlang program execution failed
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: test Erlang program execution failed
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ erlang_cv_lib_dir_ssl="not found"
-+ fi
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_dir_ssl" >&5
-+echo "${ECHO_T}$erlang_cv_lib_dir_ssl" >&6; }
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'ssl' library version" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'ssl' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_ssl+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$erlang_cv_lib_dir_ssl" = "not found"; then
-+ erlang_cv_lib_ver_ssl="not found"
-+else
-+ erlang_cv_lib_ver_ssl=`echo "$erlang_cv_lib_dir_ssl" | sed -n -e 's,^.*-\([^/-]*\)$,\1,p'`
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_ssl" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_ssl" >&6; }
-+ERLANG_LIB_DIR_ssl=$erlang_cv_lib_dir_ssl
-+
-+ERLANG_LIB_VER_ssl=$erlang_cv_lib_ver_ssl
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'stdlib' library subdirectory" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'stdlib' library subdirectory... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_dir_stdlib+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=erl
-+ac_compile='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5'
-+ac_link='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5 ; echo "#!/bin/sh" > conftest$ac_exeext ; echo "\"$ERL\" -run conftest start -run init stop -noshell" >> conftest$ac_exeext ; chmod +x conftest$ac_exeext'
-+ if test "$cross_compiling" = yes; then
-+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+-module(conftest).
-+-export([start/0]).
-+
-+start() ->
-+ ReturnValue = case code:lib_dir("stdlib") of
-+ {error, bad_name} ->
-+ file:write_file("conftest.out", "not found\n"),
-+ 1;
-+ LibDir ->
-+ file:write_file("conftest.out", LibDir),
-+ 0
-+ end,
-+ halt(ReturnValue)
-+.
-+
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ erlang_cv_lib_dir_stdlib=`cat conftest.out`
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+if test ! -f conftest.out; then
-+ { { echo "$as_me:$LINENO: error: test Erlang program execution failed
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: test Erlang program execution failed
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ erlang_cv_lib_dir_stdlib="not found"
-+ fi
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_dir_stdlib" >&5
-+echo "${ECHO_T}$erlang_cv_lib_dir_stdlib" >&6; }
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'stdlib' library version" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'stdlib' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_stdlib+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$erlang_cv_lib_dir_stdlib" = "not found"; then
-+ erlang_cv_lib_ver_stdlib="not found"
-+else
-+ erlang_cv_lib_ver_stdlib=`echo "$erlang_cv_lib_dir_stdlib" | sed -n -e 's,^.*-\([^/-]*\)$,\1,p'`
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_stdlib" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_stdlib" >&6; }
-+ERLANG_LIB_DIR_stdlib=$erlang_cv_lib_dir_stdlib
-+
-+ERLANG_LIB_VER_stdlib=$erlang_cv_lib_ver_stdlib
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'yaws' library subdirectory" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'yaws' library subdirectory... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_dir_yaws+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=erl
-+ac_compile='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5'
-+ac_link='$ERLC $ERLCFLAGS -b beam conftest.$ac_ext >&5 ; echo "#!/bin/sh" > conftest$ac_exeext ; echo "\"$ERL\" -run conftest start -run init stop -noshell" >> conftest$ac_exeext ; chmod +x conftest$ac_exeext'
-+ if test "$cross_compiling" = yes; then
-+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run test program while cross compiling
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+-module(conftest).
-+-export([start/0]).
-+
-+start() ->
-+ ReturnValue = case code:lib_dir("yaws") of
-+ {error, bad_name} ->
-+ file:write_file("conftest.out", "not found\n"),
-+ 1;
-+ LibDir ->
-+ file:write_file("conftest.out", LibDir),
-+ 0
-+ end,
-+ halt(ReturnValue)
-+.
-+
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ erlang_cv_lib_dir_yaws=`cat conftest.out`
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+if test ! -f conftest.out; then
-+ { { echo "$as_me:$LINENO: error: test Erlang program execution failed
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: test Erlang program execution failed
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ erlang_cv_lib_dir_yaws="not found"
-+ fi
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_dir_yaws" >&5
-+echo "${ECHO_T}$erlang_cv_lib_dir_yaws" >&6; }
-+{ echo "$as_me:$LINENO: checking for Erlang/OTP 'yaws' library version" >&5
-+echo $ECHO_N "checking for Erlang/OTP 'yaws' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_yaws+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$erlang_cv_lib_dir_yaws" = "not found"; then
-+ erlang_cv_lib_ver_yaws="not found"
-+else
-+ erlang_cv_lib_ver_yaws=`echo "$erlang_cv_lib_dir_yaws" | sed -n -e 's,^.*-\([^/-]*\)$,\1,p'`
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_yaws" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_yaws" >&6; }
-+ERLANG_LIB_DIR_yaws=$erlang_cv_lib_dir_yaws
-+
-+ERLANG_LIB_VER_yaws=$erlang_cv_lib_ver_yaws
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking Erlang/OTP 'asn1' library version" >&5
-+echo $ECHO_N "checking Erlang/OTP 'asn1' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_asn1+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$ERLANG_LIB_VER_asn1" = ""; then
-+ erlang_cv_lib_ver_asn1=`echo "$ERLANG_LIB_DIR_asn1"|sed -e "s/.*-\(.*\)/\1/"`
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_asn1" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_asn1" >&6; }
-+ERLANG_LIB_VER_asn1=$erlang_cv_lib_ver_asn1
-+
-+ERLANG_LIB_VER_SUBST="$ERLANG_LIB_VER_SUBST -e 's, at ERLANG_LIB_VER_asn1@,\$(ERLANG_LIB_VER_asn1),g'"
-+
-+
-+{ echo "$as_me:$LINENO: checking Erlang/OTP 'kernel' library version" >&5
-+echo $ECHO_N "checking Erlang/OTP 'kernel' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_kernel+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$ERLANG_LIB_VER_kernel" = ""; then
-+ erlang_cv_lib_ver_kernel=`echo "$ERLANG_LIB_DIR_kernel"|sed -e "s/.*-\(.*\)/\1/"`
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_kernel" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_kernel" >&6; }
-+ERLANG_LIB_VER_kernel=$erlang_cv_lib_ver_kernel
-+
-+ERLANG_LIB_VER_SUBST="$ERLANG_LIB_VER_SUBST -e 's, at ERLANG_LIB_VER_kernel@,\$(ERLANG_LIB_VER_kernel),g'"
-+
-+
-+{ echo "$as_me:$LINENO: checking Erlang/OTP 'mnesia' library version" >&5
-+echo $ECHO_N "checking Erlang/OTP 'mnesia' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_mnesia+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$ERLANG_LIB_VER_mnesia" = ""; then
-+ erlang_cv_lib_ver_mnesia=`echo "$ERLANG_LIB_DIR_mnesia"|sed -e "s/.*-\(.*\)/\1/"`
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_mnesia" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_mnesia" >&6; }
-+ERLANG_LIB_VER_mnesia=$erlang_cv_lib_ver_mnesia
-+
-+ERLANG_LIB_VER_SUBST="$ERLANG_LIB_VER_SUBST -e 's, at ERLANG_LIB_VER_mnesia@,\$(ERLANG_LIB_VER_mnesia),g'"
-+
-+
-+{ echo "$as_me:$LINENO: checking Erlang/OTP 'ssl' library version" >&5
-+echo $ECHO_N "checking Erlang/OTP 'ssl' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_ssl+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$ERLANG_LIB_VER_ssl" = ""; then
-+ erlang_cv_lib_ver_ssl=`echo "$ERLANG_LIB_DIR_ssl"|sed -e "s/.*-\(.*\)/\1/"`
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_ssl" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_ssl" >&6; }
-+ERLANG_LIB_VER_ssl=$erlang_cv_lib_ver_ssl
-+
-+ERLANG_LIB_VER_SUBST="$ERLANG_LIB_VER_SUBST -e 's, at ERLANG_LIB_VER_ssl@,\$(ERLANG_LIB_VER_ssl),g'"
-+
-+
-+{ echo "$as_me:$LINENO: checking Erlang/OTP 'stdlib' library version" >&5
-+echo $ECHO_N "checking Erlang/OTP 'stdlib' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_stdlib+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$ERLANG_LIB_VER_stdlib" = ""; then
-+ erlang_cv_lib_ver_stdlib=`echo "$ERLANG_LIB_DIR_stdlib"|sed -e "s/.*-\(.*\)/\1/"`
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_stdlib" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_stdlib" >&6; }
-+ERLANG_LIB_VER_stdlib=$erlang_cv_lib_ver_stdlib
-+
-+ERLANG_LIB_VER_SUBST="$ERLANG_LIB_VER_SUBST -e 's, at ERLANG_LIB_VER_stdlib@,\$(ERLANG_LIB_VER_stdlib),g'"
-+
-+
-+{ echo "$as_me:$LINENO: checking Erlang/OTP 'yaws' library version" >&5
-+echo $ECHO_N "checking Erlang/OTP 'yaws' library version... $ECHO_C" >&6; }
-+if test "${erlang_cv_lib_ver_yaws+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$ERLANG_LIB_VER_yaws" = ""; then
-+ erlang_cv_lib_ver_yaws=`echo "$ERLANG_LIB_DIR_yaws"|sed -e "s/.*-\(.*\)/\1/"`
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $erlang_cv_lib_ver_yaws" >&5
-+echo "${ECHO_T}$erlang_cv_lib_ver_yaws" >&6; }
-+ERLANG_LIB_VER_yaws=$erlang_cv_lib_ver_yaws
-+
-+ERLANG_LIB_VER_SUBST="$ERLANG_LIB_VER_SUBST -e 's, at ERLANG_LIB_VER_yaws@,\$(ERLANG_LIB_VER_yaws),g'"
-+
-+
-+
-+ac_config_files="$ac_config_files Makefile src/Makefile src/config/Makefile src/cpl/Makefile src/event/Makefile src/event_handler/Makefile src/include/Makefile src/local/Makefile src/mysql/Makefile src/eldap/Makefile src/database/Makefile src/transportlayer/Makefile src/sipuserdb/Makefile src/transactionlayer/Makefile yaws/src/Makefile"
-+
-+
-+
-+# Check whether --with-erlang was given.
- if test "${with_erlang+set}" = set; then
-- withval="$with_erlang"
-- if test "$withval" = "yes" -o "$withval" = "no" -o "X$with_erlang" = "X"; then
-+ withval=$with_erlang; if test "$withval" = "yes" -o "$withval" = "no" -o "X$with_erlang" = "X"; then
- extra_erl_path=""
- else
- extra_erl_path="$with_erlang:$with_erlang/bin:"
- fi
-
--fi;
-+fi
-+
-
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}erl", so it can be a program name with args.
- set dummy ${ac_tool_prefix}erl; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_path_ERL+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2339,34 +3707,35 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_ERL="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- ERL=$ac_cv_path_ERL
--
- if test -n "$ERL"; then
-- echo "$as_me:$LINENO: result: $ERL" >&5
--echo "${ECHO_T}$ERL" >&6
-+ { echo "$as_me:$LINENO: result: $ERL" >&5
-+echo "${ECHO_T}$ERL" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_path_ERL"; then
- ac_pt_ERL=$ERL
- # Extract the first word of "erl", so it can be a program name with args.
- set dummy erl; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_path_ac_pt_ERL+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2381,28 +3750,42 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_ac_pt_ERL="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- ac_pt_ERL=$ac_cv_path_ac_pt_ERL
--
- if test -n "$ac_pt_ERL"; then
-- echo "$as_me:$LINENO: result: $ac_pt_ERL" >&5
--echo "${ECHO_T}$ac_pt_ERL" >&6
-+ { echo "$as_me:$LINENO: result: $ac_pt_ERL" >&5
-+echo "${ECHO_T}$ac_pt_ERL" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- ERL=$ac_pt_ERL
-+ if test "x$ac_pt_ERL" = x; then
-+ ERL=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ ERL=$ac_pt_ERL
-+ fi
- else
- ERL="$ac_cv_path_ERL"
- fi
-@@ -2410,8 +3793,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}erlc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}erlc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_path_ERLC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2426,34 +3809,35 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_ERLC="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- ERLC=$ac_cv_path_ERLC
--
- if test -n "$ERLC"; then
-- echo "$as_me:$LINENO: result: $ERLC" >&5
--echo "${ECHO_T}$ERLC" >&6
-+ { echo "$as_me:$LINENO: result: $ERLC" >&5
-+echo "${ECHO_T}$ERLC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_path_ERLC"; then
- ac_pt_ERLC=$ERLC
- # Extract the first word of "erlc", so it can be a program name with args.
- set dummy erlc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_path_ac_pt_ERLC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2468,28 +3852,42 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_ac_pt_ERLC="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- ;;
- esac
- fi
- ac_pt_ERLC=$ac_cv_path_ac_pt_ERLC
--
- if test -n "$ac_pt_ERLC"; then
-- echo "$as_me:$LINENO: result: $ac_pt_ERLC" >&5
--echo "${ECHO_T}$ac_pt_ERLC" >&6
-+ { echo "$as_me:$LINENO: result: $ac_pt_ERLC" >&5
-+echo "${ECHO_T}$ac_pt_ERLC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- ERLC=$ac_pt_ERLC
-+ if test "x$ac_pt_ERLC" = x; then
-+ ERLC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ ERLC=$ac_pt_ERLC
-+ fi
- else
- ERLC="$ac_cv_path_ERLC"
- fi
-@@ -2501,9 +3899,16 @@
- { (exit 1); exit 1; }; }
- fi
-
--echo "$as_me:$LINENO: checking Erlang/OTP version" >&5
--echo $ECHO_N "checking Erlang/OTP version... $ECHO_C" >&6
--cat > conftest.erl <<EOF
-+# Check whether --enable-erlang-version-check was given.
-+if test "${enable_erlang_version_check+set}" = set; then
-+ enableval=$enable_erlang_version_check;
-+fi
-+
-+ case "$enable_erlang_version_check" in
-+ yes|'')
-+ { echo "$as_me:$LINENO: checking Erlang/OTP version" >&5
-+echo $ECHO_N "checking Erlang/OTP version... $ECHO_C" >&6; }
-+ cat > conftest.erl <<EOF
- -module(conftest).
- -export([start/0]).
-
-@@ -2522,70 +3927,76 @@
-
- EOF
-
--$ERLC conftest.erl || { { echo "$as_me:$LINENO: error: \"Could not compile Erlang/OTP version check program using '$ERLC'\"" >&5
-+ $ERLC conftest.erl || { { echo "$as_me:$LINENO: error: \"Could not compile Erlang/OTP version check program using '$ERLC'\"" >&5
- echo "$as_me: error: \"Could not compile Erlang/OTP version check program using '$ERLC'\"" >&2;}
- { (exit 1); exit 1; }; }
-
--if ! $ERL -s conftest -noshell -o ! -f conftest.out ; then
-- { { echo "$as_me:$LINENO: error: \"Could not run Erlang/OTP version check program using '$ERL'\"" >&5
-+ if ! $ERL -s conftest -noshell -o ! -f conftest.out ; then
-+ { { echo "$as_me:$LINENO: error: \"Could not run Erlang/OTP version check program using '$ERL'\"" >&5
- echo "$as_me: error: \"Could not run Erlang/OTP version check program using '$ERL'\"" >&2;}
- { (exit 1); exit 1; }; }
--fi
-+ fi
-
--if test "x`cat conftest.out`" != "xok"; then
-- echo "$as_me:$LINENO: result: failed" >&5
--echo "${ECHO_T}failed" >&6
-- X="`cat conftest.out`"
-- { { echo "$as_me:$LINENO: error: $X
-+ if test "x`cat conftest.out`" != "xok"; then
-+ { echo "$as_me:$LINENO: result: failed" >&5
-+echo "${ECHO_T}failed" >&6; }
-+ X="`cat conftest.out`"
-+ { { echo "$as_me:$LINENO: error: $X
- See \`config.log' for more details." >&5
- echo "$as_me: error: $X
- See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
--else
-- echo "$as_me:$LINENO: result: ok" >&5
--echo "${ECHO_T}ok" >&6
--fi
-+ else
-+ { echo "$as_me:$LINENO: result: ok" >&5
-+echo "${ECHO_T}ok" >&6; }
-+ fi
-+ ;;
-+ no)
-+ { echo "$as_me:$LINENO: result: Skipped Erlang/OTP version check" >&5
-+echo "${ECHO_T}Skipped Erlang/OTP version check" >&6; }
-+ ;;
-+esac
-
-
-
--# Check whether --with-mnesiadir or --without-mnesiadir was given.
-+# Check whether --with-mnesiadir was given.
- if test "${with_mnesiadir+set}" = set; then
-- withval="$with_mnesiadir"
-- if test "$withval" = "yes" -o "$withval" = "no" -o "X$with_mnesiadir" = "X"; then
-+ withval=$with_mnesiadir; if test "$withval" = "yes" -o "$withval" = "no" -o "X$with_mnesiadir" = "X"; then
- mnesiadir="/var/yxa/db"
- else
- mnesiadir="$with_mnesiadir"
- fi
- else
- mnesiadir="/var/yxa/db"
--fi;
-+fi
-
-
--# Check whether --with-sslcertdir or --without-sslcertdir was given.
-+
-+# Check whether --with-sslcertdir was given.
- if test "${with_sslcertdir+set}" = set; then
-- withval="$with_sslcertdir"
-- if test "$withval" = "yes" -o "$withval" = "no" -o "X$with_sslcertdir" = "X"; then
-+ withval=$with_sslcertdir; if test "$withval" = "yes" -o "$withval" = "no" -o "X$with_sslcertdir" = "X"; then
- sslcertdir='${confdir}'
- else
- sslcertdir="$with_sslcertdir"
- fi
- else
- sslcertdir='${confdir}'
--fi;
-+fi
-
-
-
--# Check whether --with-local or --without-local was given.
-+
-+# Check whether --with-local was given.
- if test "${with_local+set}" = set; then
-- withval="$with_local"
-- if test "$withval" = "yes" -o "$withval" = "no" -o "X$with_local" = "X"; then
-+ withval=$with_local; if test "$withval" = "yes" -o "$withval" = "no" -o "X$with_local" = "X"; then
- local_module="local_default"
- else
- local_module="$with_local"
- fi
- else
- local_module="local_default"
--fi;
-+fi
-+
-
-
-
-@@ -2612,39 +4023,58 @@
-
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
--# So, don't put newlines in cache variables' values.
-+# So, we kill variables containing newlines.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
--{
-+(
-+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
-+
- (set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-- ;;
-+ ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n \
-- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
-- esac;
--} |
-+ esac |
-+ sort
-+) |
- sed '
-+ /^ac_cv_env_/b end
- t clear
-- : clear
-+ :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
-- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-- : end' >>confcache
--if diff $cache_file confcache >/dev/null 2>&1; then :; else
-- if test -w $cache_file; then
-- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ :end' >>confcache
-+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-+ if test -w "$cache_file"; then
-+ test "x$cache_file" != "x/dev/null" &&
-+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
-- echo "not updating unwritable cache $cache_file"
-+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
- fi
- rm -f confcache
-@@ -2653,63 +4083,48 @@
- # Let make expand exec_prefix.
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
--# VPATH may cause trouble with some makes, so we remove $(srcdir),
--# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
--# trailing colons and then remove the whole line if VPATH becomes empty
--# (actually we leave an empty line to preserve line numbers).
--if test "x$srcdir" = x.; then
-- ac_vpsub='/^[ ]*VPATH[ ]*=/{
--s/:*\$(srcdir):*/:/;
--s/:*\${srcdir}:*/:/;
--s/:*@srcdir@:*/:/;
--s/^\([^=]*=[ ]*\):*/\1/;
--s/:*$//;
--s/^[^=]*=[ ]*$//;
--}'
--fi
--
- # Transform confdefs.h into DEFS.
- # Protect against shell expansion while executing Makefile rules.
- # Protect against Makefile macro expansion.
- #
- # If the first sed substitution is executed (which looks for macros that
--# take arguments), then we branch to the quote section. Otherwise,
-+# take arguments), then branch to the quote section. Otherwise,
- # look for a macro that doesn't take arguments.
--cat >confdef2opt.sed <<\_ACEOF
-+ac_script='
- t clear
--: clear
--s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-+:clear
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
- t quote
--s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
- t quote
--d
--: quote
--s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
--s,\[,\\&,g
--s,\],\\&,g
--s,\$,$$,g
--p
--_ACEOF
--# We use echo to avoid assuming a particular line-breaking character.
--# The extra dot is to prevent the shell from consuming trailing
--# line-breaks from the sub-command output. A line-break within
--# single-quotes doesn't work because, if this script is created in a
--# platform that uses two characters for line-breaks (e.g., DOS), tr
--# would break.
--ac_LF_and_DOT=`echo; echo .`
--DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
--rm -f confdef2opt.sed
-+b any
-+:quote
-+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-+s/\[/\\&/g
-+s/\]/\\&/g
-+s/\$/$$/g
-+H
-+:any
-+${
-+ g
-+ s/^\n//
-+ s/\n/ /g
-+ p
-+}
-+'
-+DEFS=`sed -n "$ac_script" confdefs.h`
-
-
- ac_libobjs=
- ac_ltlibobjs=
- for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
-- ac_i=`echo "$ac_i" |
-- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-- # 2. Add them.
-- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-+ ac_i=`echo "$ac_i" | sed "$ac_script"`
-+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
-+ # will be set to the directory where LIBOBJS objects are built.
-+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
- done
- LIBOBJS=$ac_libobjs
-
-@@ -2740,17 +4155,45 @@
- ## M4sh Initialization. ##
- ## --------------------- ##
-
--# Be Bourne compatible
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
--elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-- set -o posix
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
- fi
--DUALCASE=1; export DUALCASE # for MKS sh
-
- # Support unset when possible.
- if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-@@ -2760,8 +4203,43 @@
- fi
-
-
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
- # Work around bugs in pre-3.0 UWIN ksh.
--$as_unset ENV MAIL MAILPATH
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
- PS1='$ '
- PS2='> '
- PS4='+ '
-@@ -2775,18 +4253,19 @@
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
-- $as_unset $as_var
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
- done
-
- # Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
--if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
- else
- as_basename=false
-@@ -2794,159 +4273,120 @@
-
-
- # Name of the executable.
--as_me=`$as_basename "$0" ||
-+as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)$' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X/"$0" |
-- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-- /^X\/\(\/\/\)$/{ s//\1/; q; }
-- /^X\/\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
--
--
--# PATH needs CR, and LINENO needs CR and PATH.
--# Avoid depending upon Character Ranges.
--as_cr_letters='abcdefghijklmnopqrstuvwxyz'
--as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
--as_cr_Letters=$as_cr_letters$as_cr_LETTERS
--as_cr_digits='0123456789'
--as_cr_alnum=$as_cr_Letters$as_cr_digits
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-- else
-- PATH_SEPARATOR=:
-- fi
-- rm -f conf$$.sh
--fi
-+# CDPATH.
-+$as_unset CDPATH
-
-
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" || {
-- # Find who we are. Look in the path if we contain no path at all
-- # relative or not.
-- case $0 in
-- *[\\/]* ) as_myself=$0 ;;
-- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
-
-- ;;
-- esac
-- # We did not find ourselves, most probably we were run as `sh COMMAND'
-- # in which case we are not to be found in the path.
-- if test "x$as_myself" = x; then
-- as_myself=$0
-- fi
-- if test ! -f "$as_myself"; then
-- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
--echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-- { (exit 1); exit 1; }; }
-- fi
-- case $CONFIG_SHELL in
-- '')
-- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for as_base in sh bash ksh sh5; do
-- case $as_dir in
-- /*)
-- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-- CONFIG_SHELL=$as_dir/$as_base
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-- fi;;
-- esac
-- done
--done
--;;
-- esac
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
-- # line-number line before each line; the second 'sed' does the real
-- # work. The second script uses 'N' to pair each line-number line
-- # with the numbered line, and appends trailing '-' during
-- # substitution so that $LINENO is not a special case at line end.
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-- sed '=' <$as_myself |
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
- sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
- N
-- s,$,-,
-- : loop
-- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
-- s,-$,,
-- s,^['$as_cr_digits']*\n,,
-+ s/-\n.*//
- ' >$as_me.lineno &&
-- chmod +x $as_me.lineno ||
-- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
--echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-+ chmod +x "$as_me.lineno" ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
-- # original and so on. Autoconf is especially sensible to this).
-- . ./$as_me.lineno
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
- }
-
-
--case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-- *c*,-n*) ECHO_N= ECHO_C='
--' ECHO_T=' ' ;;
-- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
- esac
-
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
- rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
- echo >conf$$.file
- if ln -s conf$$.file conf$$ 2>/dev/null; then
-- # We could just check for DJGPP; but this test a) works b) is more generic
-- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-- if test -f conf$$.exe; then
-- # Don't use ln at all; we don't have any links
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-- else
-- as_ln_s='ln -s'
-- fi
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
--rm -f conf$$ conf$$.exe conf$$.file
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-
- if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-@@ -2955,7 +4395,28 @@
- as_mkdir_p=false
- fi
-
--as_executable_p="test -f"
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-
- # Sed expression to map a string onto a valid CPP name.
- as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-@@ -2964,31 +4425,14 @@
+@@ -4423,31 +4425,14 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
@@ -4749,59 +285,13 @@
-
+# values after options handling.
+ac_log="
- This file was extended by YXA $as_me 1.0rc1, which was
+ This file was extended by YXA $as_me 1.0rc2, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+generated by GNU Autoconf 2.61. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
-@@ -2996,30 +4440,18 @@
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
--_CSEOF
--echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
--echo >&5
-+on `(hostname || uname -n) 2>/dev/null | sed 1q`
-+"
-+
- _ACEOF
-
-+cat >>$CONFIG_STATUS <<_ACEOF
- # Files that config.status was made for.
--if test -n "$ac_config_files"; then
-- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
--fi
--
--if test -n "$ac_config_headers"; then
-- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
--fi
--
--if test -n "$ac_config_links"; then
-- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
--fi
-+config_files="$ac_config_files"
-
--if test -n "$ac_config_commands"; then
-- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
--fi
-+_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
--
- ac_cs_usage="\
- \`$as_me' instantiates files from templates according to the
- current configuration.
-@@ -3027,7 +4459,7 @@
- Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
-- -V, --version print version number, then exit
-+ -V, --version print version number and configuration settings, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
-@@ -3038,19 +4470,21 @@
+@@ -4485,19 +4470,21 @@
$config_files
Report bugs to <bug-autoconf at gnu.org>."
@@ -4810,7 +300,7 @@
+_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
- YXA config.status 1.0rc1
+ YXA config.status 1.0rc2
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.61,
@@ -4829,841 +319,3 @@
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
-@@ -3061,60 +4495,42 @@
- do
- case $1 in
- --*=*)
-- ac_option=`expr "x$1" : 'x\([^=]*\)='`
-- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
-- -*)
-+ *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
-- *) # This is not an option, so the user has probably given explicit
-- # arguments.
-- ac_option=$1
-- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
--_ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
-- --version | --vers* | -V )
-- echo "$ac_cs_version"; exit 0 ;;
-- --he | --h)
-- # Conflict between --help and --header
-- { { echo "$as_me:$LINENO: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&5
--echo "$as_me: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&2;}
-- { (exit 1); exit 1; }; };;
-- --help | --hel | -h )
-- echo "$ac_cs_usage"; exit 0 ;;
-- --debug | --d* | -d )
-+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-+ echo "$ac_cs_version"; exit ;;
-+ --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
-- --header | --heade | --head | --hea )
-- $ac_shift
-- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-- ac_need_defaults=false;;
-+ --he | --h | --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
-- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&5
--echo "$as_me: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&2;}
-+ -*) { echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
-- *) ac_config_targets="$ac_config_targets $1" ;;
-+ *) ac_config_targets="$ac_config_targets $1"
-+ ac_need_defaults=false ;;
-
- esac
- shift
-@@ -3130,42 +4546,56 @@
- _ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF
- if \$ac_cs_recheck; then
-- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ CONFIG_SHELL=$SHELL
-+ export CONFIG_SHELL
-+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- fi
-
- _ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+ echo "$ac_log"
-+} >&5
-
--
--
--
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+# Handling of arguments.
- for ac_config_target in $ac_config_targets
- do
-- case "$ac_config_target" in
-- # Handling of arguments.
-- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-- "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-- "src/config/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/config/Makefile" ;;
-- "src/cpl/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/cpl/Makefile" ;;
-- "src/event/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/event/Makefile" ;;
-- "src/event_handler/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/event_handler/Makefile" ;;
-- "src/include/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;;
-- "src/local/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/local/Makefile" ;;
-- "src/mysql/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/mysql/Makefile" ;;
-- "src/eldap/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/eldap/Makefile" ;;
-- "src/database/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/database/Makefile" ;;
-- "src/transportlayer/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/transportlayer/Makefile" ;;
-- "src/sipuserdb/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/sipuserdb/Makefile" ;;
-- "src/transactionlayer/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/transactionlayer/Makefile" ;;
-- "yaws/src/Makefile" ) CONFIG_FILES="$CONFIG_FILES yaws/src/Makefile" ;;
-+ case $ac_config_target in
-+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-+ "src/config/Makefile") CONFIG_FILES="$CONFIG_FILES src/config/Makefile" ;;
-+ "src/cpl/Makefile") CONFIG_FILES="$CONFIG_FILES src/cpl/Makefile" ;;
-+ "src/event/Makefile") CONFIG_FILES="$CONFIG_FILES src/event/Makefile" ;;
-+ "src/event_handler/Makefile") CONFIG_FILES="$CONFIG_FILES src/event_handler/Makefile" ;;
-+ "src/include/Makefile") CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;;
-+ "src/local/Makefile") CONFIG_FILES="$CONFIG_FILES src/local/Makefile" ;;
-+ "src/mysql/Makefile") CONFIG_FILES="$CONFIG_FILES src/mysql/Makefile" ;;
-+ "src/eldap/Makefile") CONFIG_FILES="$CONFIG_FILES src/eldap/Makefile" ;;
-+ "src/database/Makefile") CONFIG_FILES="$CONFIG_FILES src/database/Makefile" ;;
-+ "src/transportlayer/Makefile") CONFIG_FILES="$CONFIG_FILES src/transportlayer/Makefile" ;;
-+ "src/sipuserdb/Makefile") CONFIG_FILES="$CONFIG_FILES src/sipuserdb/Makefile" ;;
-+ "src/transactionlayer/Makefile") CONFIG_FILES="$CONFIG_FILES src/transactionlayer/Makefile" ;;
-+ "yaws/src/Makefile") CONFIG_FILES="$CONFIG_FILES yaws/src/Makefile" ;;
-+
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
- echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- done
-
-+
- # If the user did not use the arguments to specify the items to instantiate,
- # then the envvar interface is used. Set only those that are not.
- # We use the long form for the default assignment because of an extremely
-@@ -3175,304 +4605,384 @@
- fi
-
- # Have a temporary directory for convenience. Make it in the build tree
--# simply because there is no reason to put it here, and in addition,
-+# simply because there is no reason against having it here, and in addition,
- # creating and moving files from /tmp can sometimes cause problems.
--# Create a temporary directory, and hook for its removal unless debugging.
-+# Hook for its removal unless debugging.
-+# Note that there is a small window in which the directory will not be cleaned:
-+# after its creation but before its name has been assigned to `$tmp'.
- $debug ||
- {
-- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ tmp=
-+ trap 'exit_status=$?
-+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-+' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
- }
--
- # Create a (secure) tmp directory for tmp files.
-
- {
-- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
- } ||
- {
-- tmp=./confstat$$-$RANDOM
-- (umask 077 && mkdir $tmp)
-+ tmp=./conf$$-$RANDOM
-+ (umask 077 && mkdir "$tmp")
- } ||
- {
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
- }
-
--_ACEOF
--
--cat >>$CONFIG_STATUS <<_ACEOF
--
- #
--# CONFIG_FILES section.
-+# Set up the sed scripts for CONFIG_FILES section.
- #
-
- # No need to generate the scripts if there are no CONFIG_FILES.
- # This happens for instance when ./config.status config.h
--if test -n "\$CONFIG_FILES"; then
-- # Protect against being on the right side of a sed subst in config.status.
-- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
--s, at SHELL@,$SHELL,;t t
--s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
--s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
--s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
--s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
--s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
--s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
--s, at exec_prefix@,$exec_prefix,;t t
--s, at prefix@,$prefix,;t t
--s, at program_transform_name@,$program_transform_name,;t t
--s, at bindir@,$bindir,;t t
--s, at sbindir@,$sbindir,;t t
--s, at libexecdir@,$libexecdir,;t t
--s, at datadir@,$datadir,;t t
--s, at sysconfdir@,$sysconfdir,;t t
--s, at sharedstatedir@,$sharedstatedir,;t t
--s, at localstatedir@,$localstatedir,;t t
--s, at libdir@,$libdir,;t t
--s, at includedir@,$includedir,;t t
--s, at oldincludedir@,$oldincludedir,;t t
--s, at infodir@,$infodir,;t t
--s, at mandir@,$mandir,;t t
--s, at build_alias@,$build_alias,;t t
--s, at host_alias@,$host_alias,;t t
--s, at target_alias@,$target_alias,;t t
--s, at DEFS@,$DEFS,;t t
--s, at ECHO_C@,$ECHO_C,;t t
--s, at ECHO_N@,$ECHO_N,;t t
--s, at ECHO_T@,$ECHO_T,;t t
--s, at LIBS@,$LIBS,;t t
--s, at CC@,$CC,;t t
--s, at CFLAGS@,$CFLAGS,;t t
--s, at LDFLAGS@,$LDFLAGS,;t t
--s, at CPPFLAGS@,$CPPFLAGS,;t t
--s, at ac_ct_CC@,$ac_ct_CC,;t t
--s, at EXEEXT@,$EXEEXT,;t t
--s, at OBJEXT@,$OBJEXT,;t t
--s, at INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
--s, at INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
--s, at INSTALL_DATA@,$INSTALL_DATA,;t t
--s, at ERL@,$ERL,;t t
--s, at ac_pt_ERL@,$ac_pt_ERL,;t t
--s, at ERLC@,$ERLC,;t t
--s, at ac_pt_ERLC@,$ac_pt_ERLC,;t t
--s, at DESTDIR@,$DESTDIR,;t t
--s, at mnesiadir@,$mnesiadir,;t t
--s, at sslcertdir@,$sslcertdir,;t t
--s, at local_module@,$local_module,;t t
--s, at LIBOBJS@,$LIBOBJS,;t t
--s, at LTLIBOBJS@,$LTLIBOBJS,;t t
--CEOF
-+if test -n "$CONFIG_FILES"; then
-
- _ACEOF
-
-- cat >>$CONFIG_STATUS <<\_ACEOF
-- # Split the substitutions into bite-sized pieces for seds with
-- # small command number limits, like on Digital OSF/1 and HP-UX.
-- ac_max_sed_lines=48
-- ac_sed_frag=1 # Number of current file.
-- ac_beg=1 # First line for current file.
-- ac_end=$ac_max_sed_lines # Line after last line for current file.
-- ac_more_lines=:
-- ac_sed_cmds=
-- while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-- else
-- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-- fi
-- if test ! -s $tmp/subs.frag; then
-- ac_more_lines=false
-- else
-- # The purpose of the label and of the branching condition is to
-- # speed up the sed processing (if there are no `@' at all, there
-- # is no need to browse any of the substitutions).
-- # These are the two extra sed commands mentioned above.
-- (echo ':t
-- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-- fi
-- ac_sed_frag=`expr $ac_sed_frag + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_lines`
-- fi
-- done
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+ cat >conf$$subs.sed <<_ACEOF
-+SHELL!$SHELL$ac_delim
-+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-+exec_prefix!$exec_prefix$ac_delim
-+prefix!$prefix$ac_delim
-+program_transform_name!$program_transform_name$ac_delim
-+bindir!$bindir$ac_delim
-+sbindir!$sbindir$ac_delim
-+libexecdir!$libexecdir$ac_delim
-+datarootdir!$datarootdir$ac_delim
-+datadir!$datadir$ac_delim
-+sysconfdir!$sysconfdir$ac_delim
-+sharedstatedir!$sharedstatedir$ac_delim
-+localstatedir!$localstatedir$ac_delim
-+includedir!$includedir$ac_delim
-+oldincludedir!$oldincludedir$ac_delim
-+docdir!$docdir$ac_delim
-+infodir!$infodir$ac_delim
-+htmldir!$htmldir$ac_delim
-+dvidir!$dvidir$ac_delim
-+pdfdir!$pdfdir$ac_delim
-+psdir!$psdir$ac_delim
-+libdir!$libdir$ac_delim
-+localedir!$localedir$ac_delim
-+mandir!$mandir$ac_delim
-+DEFS!$DEFS$ac_delim
-+ECHO_C!$ECHO_C$ac_delim
-+ECHO_N!$ECHO_N$ac_delim
-+ECHO_T!$ECHO_T$ac_delim
-+LIBS!$LIBS$ac_delim
-+build_alias!$build_alias$ac_delim
-+host_alias!$host_alias$ac_delim
-+target_alias!$target_alias$ac_delim
-+CC!$CC$ac_delim
-+CFLAGS!$CFLAGS$ac_delim
-+LDFLAGS!$LDFLAGS$ac_delim
-+CPPFLAGS!$CPPFLAGS$ac_delim
-+ac_ct_CC!$ac_ct_CC$ac_delim
-+EXEEXT!$EXEEXT$ac_delim
-+OBJEXT!$OBJEXT$ac_delim
-+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-+INSTALL_DATA!$INSTALL_DATA$ac_delim
-+ERLC!$ERLC$ac_delim
-+ERLCFLAGS!$ERLCFLAGS$ac_delim
-+ERL!$ERL$ac_delim
-+ERLANG_INSTALL_LIB_DIR!$ERLANG_INSTALL_LIB_DIR$ac_delim
-+ERLANG_LIB_DIR_asn1!$ERLANG_LIB_DIR_asn1$ac_delim
-+ERLANG_LIB_VER_asn1!$ERLANG_LIB_VER_asn1$ac_delim
-+ERLANG_LIB_DIR_kernel!$ERLANG_LIB_DIR_kernel$ac_delim
-+ERLANG_LIB_VER_kernel!$ERLANG_LIB_VER_kernel$ac_delim
-+ERLANG_LIB_DIR_mnesia!$ERLANG_LIB_DIR_mnesia$ac_delim
-+ERLANG_LIB_VER_mnesia!$ERLANG_LIB_VER_mnesia$ac_delim
-+ERLANG_LIB_DIR_ssl!$ERLANG_LIB_DIR_ssl$ac_delim
-+ERLANG_LIB_VER_ssl!$ERLANG_LIB_VER_ssl$ac_delim
-+ERLANG_LIB_DIR_stdlib!$ERLANG_LIB_DIR_stdlib$ac_delim
-+ERLANG_LIB_VER_stdlib!$ERLANG_LIB_VER_stdlib$ac_delim
-+ERLANG_LIB_DIR_yaws!$ERLANG_LIB_DIR_yaws$ac_delim
-+ERLANG_LIB_VER_yaws!$ERLANG_LIB_VER_yaws$ac_delim
-+ERLANG_LIB_VER_SUBST!$ERLANG_LIB_VER_SUBST$ac_delim
-+DESTDIR!$DESTDIR$ac_delim
-+mnesiadir!$mnesiadir$ac_delim
-+sslcertdir!$sslcertdir$ac_delim
-+local_module!$local_module$ac_delim
-+LIBOBJS!$LIBOBJS$ac_delim
-+LTLIBOBJS!$LTLIBOBJS$ac_delim
-+_ACEOF
-+
-+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 70; then
-+ break
-+ elif $ac_last_try; then
-+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
--fi # test -n "$CONFIG_FILES"
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+ ac_eof=`expr $ac_eof + 1`
-+fi
-
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
- _ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+:end
-+s/|#_!!_#|//g
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/
-+s/:*\${srcdir}:*/:/
-+s/:*@srcdir@:*/:/
-+s/^\([^=]*=[ ]*\):*/\1/
-+s/:*$//
-+s/^[^=]*=[ ]*$//
-+}'
-+fi
-+
- cat >>$CONFIG_STATUS <<\_ACEOF
--for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case $ac_file in
-- - | *:- | *:-:* ) # input from stdin
-- cat >$tmp/stdin
-- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-- * ) ac_file_in=$ac_file.in ;;
-+fi # test -n "$CONFIG_FILES"
-+
-+
-+for ac_tag in :F $CONFIG_FILES
-+do
-+ case $ac_tag in
-+ :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
-+ case $ac_mode$ac_tag in
-+ :[FHL]*:*);;
-+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ :[FH]-) ac_tag=-:-;;
-+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-+ esac
-+ ac_save_IFS=$IFS
-+ IFS=:
-+ set x $ac_tag
-+ IFS=$ac_save_IFS
-+ shift
-+ ac_file=$1
-+ shift
-
-- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+ case $ac_mode in
-+ :L) ac_source=$1;;
-+ :[FH])
-+ ac_file_inputs=
-+ for ac_f
-+ do
-+ case $ac_f in
-+ -) ac_f="$tmp/stdin";;
-+ *) # Look for the file first in the build tree, then in the source tree
-+ # (if the path is not absolute). The absolute path cannot be DOS-style,
-+ # because $ac_f cannot contain `:'.
-+ test -f "$ac_f" ||
-+ case $ac_f in
-+ [\\/$]*) false;;
-+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-+ esac ||
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
-+ ac_file_inputs="$ac_file_inputs $ac_f"
-+ done
-+
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ configure_input="Generated from "`IFS=:
-+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-+ if test x"$ac_file" != x-; then
-+ configure_input="$ac_file. $configure_input"
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ fi
-+
-+ case $ac_tag in
-+ *:-:* | *:-) cat >"$tmp/stdin";;
-+ esac
-+ ;;
-+ esac
-+
-+ ac_dir=`$as_dirname -- "$ac_file" ||
- $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
-- X"$ac_file" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$ac_file" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- { if $as_mkdir_p; then
-- mkdir -p "$ac_dir"
-- else
-- as_dir="$ac_dir"
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ { as_dir="$ac_dir"
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
-- while test ! -d "$as_dir"; do
-- as_dirs="$as_dir $as_dirs"
-- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
- $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
-- X"$as_dir" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$as_dir" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
- done
-- test ! -n "$as_dirs" || mkdir $as_dirs
-- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
--echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
--
- ac_builddir=.
-
--if test "$ac_dir" != .; then
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
--else
-- ac_dir_suffix= ac_top_builddir=
--fi
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-
- case $srcdir in
-- .) # No --srcdir option. We are building in place.
-+ .) # We are building in place.
- ac_srcdir=.
-- if test -z "$ac_top_builddir"; then
-- ac_top_srcdir=.
-- else
-- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-- fi ;;
-- [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
-- ac_top_srcdir=$srcdir ;;
-- *) # Relative path.
-- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
- esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
--# Do not use `cd foo && pwd` to compute absolute paths, because
--# the directories may not exist.
--case `pwd` in
--.) ac_abs_builddir="$ac_dir";;
--*)
-- case "$ac_dir" in
-- .) ac_abs_builddir=`pwd`;;
-- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-- *) ac_abs_builddir=`pwd`/"$ac_dir";;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_builddir=${ac_top_builddir}.;;
--*)
-- case ${ac_top_builddir}. in
-- .) ac_abs_top_builddir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_srcdir=$ac_srcdir;;
--*)
-- case $ac_srcdir in
-- .) ac_abs_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_srcdir=$ac_top_srcdir;;
--*)
-- case $ac_top_srcdir in
-- .) ac_abs_top_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-- esac;;
--esac
-
-+ case $ac_mode in
-+ :F)
-+ #
-+ # CONFIG_FILE
-+ #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
-+_ACEOF
-
-- if test x"$ac_file" != x-; then
-- { echo "$as_me:$LINENO: creating $ac_file" >&5
--echo "$as_me: creating $ac_file" >&6;}
-- rm -f "$ac_file"
-- fi
-- # Let's still pretend it is `configure' which instantiates (i.e., don't
-- # use $as_me), people would be surprised to read:
-- # /* config.h. Generated by config.status. */
-- if test x"$ac_file" = x-; then
-- configure_input=
-- else
-- configure_input="$ac_file. "
-- fi
-- configure_input=$configure_input"Generated from `echo $ac_file_in |
-- sed 's,.*/,,'` by configure."
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If the template does not know about datarootdir, expand it.
-+# FIXME: This hack should be removed a few years after 2.60.
-+ac_datarootdir_hack=; ac_datarootdir_seen=
-
-- # First look for the input files in the build tree, otherwise in the
-- # src tree.
-- ac_file_inputs=`IFS=:
-- for f in $ac_file_in; do
-- case $f in
-- -) echo $tmp/stdin ;;
-- [\\/$]*)
-- # Absolute (can't be DOS-style, as IFS=:)
-- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
--echo "$as_me: error: cannot find input file: $f" >&2;}
-- { (exit 1); exit 1; }; }
-- echo "$f";;
-- *) # Relative
-- if test -f "$f"; then
-- # Build tree
-- echo "$f"
-- elif test -f "$srcdir/$f"; then
-- # Source tree
-- echo "$srcdir/$f"
-- else
-- # /dev/null tree
-- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
--echo "$as_me: error: cannot find input file: $f" >&2;}
-- { (exit 1); exit 1; }; }
-- fi;;
-- esac
-- done` || { (exit 1); exit 1; }
-+case `sed -n '/datarootdir/ {
-+ p
-+ q
-+}
-+/@datadir@/p
-+/@docdir@/p
-+/@infodir@/p
-+/@localedir@/p
-+/@mandir@/p
-+' $ac_file_inputs` in
-+*datarootdir*) ac_datarootdir_seen=yes;;
-+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ ac_datarootdir_hack='
-+ s&@datadir@&$datadir&g
-+ s&@docdir@&$docdir&g
-+ s&@infodir@&$infodir&g
-+ s&@localedir@&$localedir&g
-+ s&@mandir@&$mandir&g
-+ s&\\\${datarootdir}&$datarootdir&g' ;;
-+esac
- _ACEOF
-+
-+# Neutralize VPATH when `$srcdir' = `.'.
-+# Shell code in configure.ac might set extrasub.
-+# FIXME: do we really want to maintain this feature?
- cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
- $extrasub
-@@ -3480,29 +4990,40 @@
- cat >>$CONFIG_STATUS <<\_ACEOF
- :t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
--s, at configure_input@,$configure_input,;t t
--s, at srcdir@,$ac_srcdir,;t t
--s, at abs_srcdir@,$ac_abs_srcdir,;t t
--s, at top_srcdir@,$ac_top_srcdir,;t t
--s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
--s, at builddir@,$ac_builddir,;t t
--s, at abs_builddir@,$ac_abs_builddir,;t t
--s, at top_builddir@,$ac_top_builddir,;t t
--s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
--s, at INSTALL@,$ac_INSTALL,;t t
--" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-- rm -f $tmp/stdin
-- if test x"$ac_file" != x-; then
-- mv $tmp/out $ac_file
-- else
-- cat $tmp/out
-- rm -f $tmp/out
-- fi
-+s&@configure_input@&$configure_input&;t t
-+s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@srcdir@&$ac_srcdir&;t t
-+s&@abs_srcdir@&$ac_abs_srcdir&;t t
-+s&@top_srcdir@&$ac_top_srcdir&;t t
-+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-+s&@builddir@&$ac_builddir&;t t
-+s&@abs_builddir@&$ac_abs_builddir&;t t
-+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-+s&@INSTALL@&$ac_INSTALL&;t t
-+$ac_datarootdir_hack
-+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
-
--done
--_ACEOF
-+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&5
-+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&2;}
-+
-+ rm -f "$tmp/stdin"
-+ case $ac_file in
-+ -) cat "$tmp/out"; rm -f "$tmp/out";;
-+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-+ esac
-+ ;;
-+
-+
-+
-+ esac
-+
-+done # for ac_tag
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-
- { (exit 0); exit 0; }
- _ACEOF
Modified: yxa/trunk/debian/patches/erlang-auto-rel.dpatch
URL: http://svn.debian.org/wsvn/pkg-voip/yxa/trunk/debian/patches/erlang-auto-rel.dpatch?rev=4812&op=diff
==============================================================================
--- yxa/trunk/debian/patches/erlang-auto-rel.dpatch (original)
+++ yxa/trunk/debian/patches/erlang-auto-rel.dpatch Mon Nov 5 14:50:38 2007
@@ -5,9 +5,9 @@
## DP: Autodetect Erlang OTP library version numbers
@DPATCH@
-diff -urNad yxa-1.0~rc1~/src/Makefile.in yxa-1.0~rc1/src/Makefile.in
---- yxa-1.0~rc1~/src/Makefile.in 2007-07-11 19:28:43.000000000 +0200
-+++ yxa-1.0~rc1/src/Makefile.in 2007-07-11 19:28:44.000000000 +0200
+diff -urNad yxa-1.0~rc2~/src/Makefile.in yxa-1.0~rc2/src/Makefile.in
+--- yxa-1.0~rc2~/src/Makefile.in 2007-10-17 17:47:16.000000000 +0200
++++ yxa-1.0~rc2/src/Makefile.in 2007-10-17 17:47:17.000000000 +0200
@@ -25,6 +25,14 @@
install_DATA = @INSTALL_DATA@
install_PROGRAM = @INSTALL_PROGRAM@
@@ -23,7 +23,7 @@
mkinstalldirs = $(SHELL) $(top_srcdir)/scripts/mkinstalldirs
systools_make_script = \
-@@ -154,15 +162,15 @@
+@@ -155,15 +163,15 @@
clean: clean-recursive
rm -f core *.core *~
@@ -42,7 +42,7 @@
.erl.beam:
$(ERLC) -I$(srcdir) -I$(srcdir)/include/ -W +debug_info $<
-@@ -176,6 +184,9 @@
+@@ -177,6 +185,9 @@
.app-in.app:
cp $(srcdir)/$*.app-in $*.app
@@ -52,9 +52,9 @@
incomingproxy.boot: incomingproxy.app $(srcdir)/incomingproxy.rel
$(systools_make_script)
-diff -urNad yxa-1.0~rc1~/src/appserver.rel yxa-1.0~rc1/src/appserver.rel
---- yxa-1.0~rc1~/src/appserver.rel 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/appserver.rel 1970-01-01 01:00:00.000000000 +0100
+diff -urNad yxa-1.0~rc2~/src/appserver.rel yxa-1.0~rc2/src/appserver.rel
+--- yxa-1.0~rc2~/src/appserver.rel 2007-04-12 10:39:44.000000000 +0200
++++ yxa-1.0~rc2/src/appserver.rel 1970-01-01 01:00:00.000000000 +0100
@@ -1,7 +0,0 @@
-%% Erlang OTP R11B-4 library versions
-{release, {"YXA application server","0.0"}, {erts, "5.2"},
@@ -63,9 +63,9 @@
- {ssl, "3.1"},
- {mnesia, "4.3.4"},
- {appserver, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/appserver.rel-in yxa-1.0~rc1/src/appserver.rel-in
---- yxa-1.0~rc1~/src/appserver.rel-in 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/appserver.rel-in 2007-07-11 19:28:44.000000000 +0200
+diff -urNad yxa-1.0~rc2~/src/appserver.rel-in yxa-1.0~rc2/src/appserver.rel-in
+--- yxa-1.0~rc2~/src/appserver.rel-in 1970-01-01 01:00:00.000000000 +0100
++++ yxa-1.0~rc2/src/appserver.rel-in 2007-10-17 17:47:17.000000000 +0200
@@ -0,0 +1,7 @@
+%% Erlang OTP R11B-4 library versions
+{release, {"YXA application server","0.0"}, {erts, "5.2"},
@@ -74,9 +74,9 @@
+ {ssl, "@ERLANG_LIB_VER_ssl@"},
+ {mnesia, "@ERLANG_LIB_VER_mnesia@"},
+ {appserver, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/event/Makefile.in yxa-1.0~rc1/src/event/Makefile.in
---- yxa-1.0~rc1~/src/event/Makefile.in 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/event/Makefile.in 2007-07-11 19:28:44.000000000 +0200
+diff -urNad yxa-1.0~rc2~/src/event/Makefile.in yxa-1.0~rc2/src/event/Makefile.in
+--- yxa-1.0~rc2~/src/event/Makefile.in 2007-10-17 14:46:31.000000000 +0200
++++ yxa-1.0~rc2/src/event/Makefile.in 2007-10-17 17:48:28.000000000 +0200
@@ -25,6 +25,14 @@
install_DATA = @INSTALL_DATA@
install_PROGRAM = @INSTALL_PROGRAM@
@@ -92,7 +92,7 @@
mkinstalldirs = $(SHELL) $(top_srcdir)/scripts/mkinstalldirs
systools_make_script = \
-@@ -88,16 +96,16 @@
+@@ -88,7 +96,7 @@
clean:
rm -f core *.core *~
@@ -101,6 +101,7 @@
rm -f *.o ktrace.out erl_crash.dump
rm -f $(start_FILES)
+@@ -104,9 +112,9 @@
$(beam_FILES): $(yxa_hrl_FILES)
$(boot_FILES): $(beam_FILES)
@@ -112,7 +113,7 @@
.erl.beam:
$(ERLC) -I$(srcdir) -I$(srcdir)/../include/ -pz ../ -W +debug_info $<
-@@ -105,6 +113,9 @@
+@@ -114,6 +122,9 @@
.app-in.app:
cp $(srcdir)/$*.app-in $*.app
@@ -122,9 +123,9 @@
eventserver.boot: eventserver.app $(srcdir)/eventserver.rel
$(systools_make_script)
-diff -urNad yxa-1.0~rc1~/src/event/eventserver.rel yxa-1.0~rc1/src/event/eventserver.rel
---- yxa-1.0~rc1~/src/event/eventserver.rel 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/event/eventserver.rel 1970-01-01 01:00:00.000000000 +0100
+diff -urNad yxa-1.0~rc2~/src/event/eventserver.rel yxa-1.0~rc2/src/event/eventserver.rel
+--- yxa-1.0~rc2~/src/event/eventserver.rel 2007-04-12 10:39:44.000000000 +0200
++++ yxa-1.0~rc2/src/event/eventserver.rel 1970-01-01 01:00:00.000000000 +0100
@@ -1,8 +0,0 @@
-%% Erlang OTP R11B-4 library versions
-{release, {"YXA Event package server framework", "0.0"}, {erts, "5.2"},
@@ -134,9 +135,9 @@
- {asn1, "1.4.4.14"},
- {mnesia, "4.3.4"},
- {eventserver, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/event/eventserver.rel-in yxa-1.0~rc1/src/event/eventserver.rel-in
---- yxa-1.0~rc1~/src/event/eventserver.rel-in 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/event/eventserver.rel-in 2007-07-11 19:28:44.000000000 +0200
+diff -urNad yxa-1.0~rc2~/src/event/eventserver.rel-in yxa-1.0~rc2/src/event/eventserver.rel-in
+--- yxa-1.0~rc2~/src/event/eventserver.rel-in 1970-01-01 01:00:00.000000000 +0100
++++ yxa-1.0~rc2/src/event/eventserver.rel-in 2007-10-17 17:47:17.000000000 +0200
@@ -0,0 +1,8 @@
+%% Erlang OTP R11B-4 library versions
+{release, {"YXA Event package server framework", "0.0"}, {erts, "5.2"},
@@ -146,9 +147,9 @@
+ {asn1, "@ERLANG_LIB_VER_asn1@"},
+ {mnesia, "@ERLANG_LIB_VER_mnesia@"},
+ {eventserver, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/incomingproxy.rel yxa-1.0~rc1/src/incomingproxy.rel
---- yxa-1.0~rc1~/src/incomingproxy.rel 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/incomingproxy.rel 1970-01-01 01:00:00.000000000 +0100
+diff -urNad yxa-1.0~rc2~/src/incomingproxy.rel yxa-1.0~rc2/src/incomingproxy.rel
+--- yxa-1.0~rc2~/src/incomingproxy.rel 2007-04-12 10:39:44.000000000 +0200
++++ yxa-1.0~rc2/src/incomingproxy.rel 1970-01-01 01:00:00.000000000 +0100
@@ -1,8 +0,0 @@
-%% Erlang OTP R11B-4 library versions
-{release, {"YXA incomingproxy","0.0"}, {erts, "5.2"},
@@ -158,9 +159,9 @@
- {asn1, "1.4.4.14"},
- {mnesia, "4.3.4"},
- {incomingproxy, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/incomingproxy.rel-in yxa-1.0~rc1/src/incomingproxy.rel-in
---- yxa-1.0~rc1~/src/incomingproxy.rel-in 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/incomingproxy.rel-in 2007-07-11 19:28:44.000000000 +0200
+diff -urNad yxa-1.0~rc2~/src/incomingproxy.rel-in yxa-1.0~rc2/src/incomingproxy.rel-in
+--- yxa-1.0~rc2~/src/incomingproxy.rel-in 1970-01-01 01:00:00.000000000 +0100
++++ yxa-1.0~rc2/src/incomingproxy.rel-in 2007-10-17 17:47:17.000000000 +0200
@@ -0,0 +1,8 @@
+%% Erlang OTP R11B-4 library versions
+{release, {"YXA incomingproxy","0.0"}, {erts, "5.2"},
@@ -170,9 +171,9 @@
+ {asn1, "@ERLANG_LIB_VER_asn1@"},
+ {mnesia, "@ERLANG_LIB_VER_mnesia@"},
+ {incomingproxy, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/outgoingproxy.rel yxa-1.0~rc1/src/outgoingproxy.rel
---- yxa-1.0~rc1~/src/outgoingproxy.rel 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/outgoingproxy.rel 1970-01-01 01:00:00.000000000 +0100
+diff -urNad yxa-1.0~rc2~/src/outgoingproxy.rel yxa-1.0~rc2/src/outgoingproxy.rel
+--- yxa-1.0~rc2~/src/outgoingproxy.rel 2007-04-12 10:39:44.000000000 +0200
++++ yxa-1.0~rc2/src/outgoingproxy.rel 1970-01-01 01:00:00.000000000 +0100
@@ -1,7 +0,0 @@
-%% Erlang OTP R11B-4 library versions
-{release, {"YXA outgoingproxy","0.0"}, {erts, "5.2"},
@@ -181,9 +182,9 @@
- {ssl, "3.1"},
- {mnesia, "4.3.4"},
- {outgoingproxy, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/outgoingproxy.rel-in yxa-1.0~rc1/src/outgoingproxy.rel-in
---- yxa-1.0~rc1~/src/outgoingproxy.rel-in 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/outgoingproxy.rel-in 2007-07-11 19:28:44.000000000 +0200
+diff -urNad yxa-1.0~rc2~/src/outgoingproxy.rel-in yxa-1.0~rc2/src/outgoingproxy.rel-in
+--- yxa-1.0~rc2~/src/outgoingproxy.rel-in 1970-01-01 01:00:00.000000000 +0100
++++ yxa-1.0~rc2/src/outgoingproxy.rel-in 2007-10-17 17:47:17.000000000 +0200
@@ -0,0 +1,7 @@
+%% Erlang OTP R11B-4 library versions
+{release, {"YXA outgoingproxy","0.0"}, {erts, "5.2"},
@@ -192,9 +193,9 @@
+ {ssl, "@ERLANG_LIB_VER_ssl@"},
+ {mnesia, "@ERLANG_LIB_VER_mnesia@"},
+ {outgoingproxy, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/pstnproxy.rel yxa-1.0~rc1/src/pstnproxy.rel
---- yxa-1.0~rc1~/src/pstnproxy.rel 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/pstnproxy.rel 1970-01-01 01:00:00.000000000 +0100
+diff -urNad yxa-1.0~rc2~/src/pstnproxy.rel yxa-1.0~rc2/src/pstnproxy.rel
+--- yxa-1.0~rc2~/src/pstnproxy.rel 2007-04-12 10:39:44.000000000 +0200
++++ yxa-1.0~rc2/src/pstnproxy.rel 1970-01-01 01:00:00.000000000 +0100
@@ -1,8 +0,0 @@
-%% Erlang OTP R11B-4 library versions
-{release, {"YXA pstnproxy","0.0"}, {erts, "5.2"},
@@ -204,9 +205,9 @@
- {asn1, "1.4.4.14"},
- {mnesia, "4.3.4"},
- {pstnproxy, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/pstnproxy.rel-in yxa-1.0~rc1/src/pstnproxy.rel-in
---- yxa-1.0~rc1~/src/pstnproxy.rel-in 2007-07-11 19:25:03.000000000 +0200
-+++ yxa-1.0~rc1/src/pstnproxy.rel-in 2007-07-11 19:28:44.000000000 +0200
+diff -urNad yxa-1.0~rc2~/src/pstnproxy.rel-in yxa-1.0~rc2/src/pstnproxy.rel-in
+--- yxa-1.0~rc2~/src/pstnproxy.rel-in 1970-01-01 01:00:00.000000000 +0100
++++ yxa-1.0~rc2/src/pstnproxy.rel-in 2007-10-17 17:47:17.000000000 +0200
@@ -0,0 +1,8 @@
+%% Erlang OTP R11B-4 library versions
+{release, {"YXA pstnproxy","0.0"}, {erts, "5.2"},
@@ -216,9 +217,9 @@
+ {asn1, "@ERLANG_LIB_VER_asn1@"},
+ {mnesia, "@ERLANG_LIB_VER_mnesia@"},
+ {pstnproxy, "0.0"}]}.
-diff -urNad yxa-1.0~rc1~/src/start_ssl.rel yxa-1.0~rc1/src/start_ssl.rel
---- yxa-1.0~rc1~/src/start_ssl.rel 2007-04-12 10:39:44.000000000 +0200
-+++ yxa-1.0~rc1/src/start_ssl.rel 1970-01-01 01:00:00.000000000 +0100
+diff -urNad yxa-1.0~rc2~/src/start_ssl.rel yxa-1.0~rc2/src/start_ssl.rel
+--- yxa-1.0~rc2~/src/start_ssl.rel 2007-04-12 10:39:44.000000000 +0200
++++ yxa-1.0~rc2/src/start_ssl.rel 1970-01-01 01:00:00.000000000 +0100
@@ -1,8 +0,0 @@
-%% Erlang OTP R11B-4 library versions
-%% File to get Erlang distribution using SSL started
@@ -228,9 +229,9 @@
- {ssl, "3.1"}
- ]
-}.
-diff -urNad yxa-1.0~rc1~/src/start_ssl.rel-in yxa-1.0~rc1/src/start_ssl.rel-in
---- yxa-1.0~rc1~/src/start_ssl.rel-in 1970-01-01 01:00:00.000000000 +0100
-+++ yxa-1.0~rc1/src/start_ssl.rel-in 2007-07-11 19:29:25.000000000 +0200
+diff -urNad yxa-1.0~rc2~/src/start_ssl.rel-in yxa-1.0~rc2/src/start_ssl.rel-in
+--- yxa-1.0~rc2~/src/start_ssl.rel-in 1970-01-01 01:00:00.000000000 +0100
++++ yxa-1.0~rc2/src/start_ssl.rel-in 2007-10-17 17:47:17.000000000 +0200
@@ -0,0 +1,8 @@
+%% Erlang OTP R11B-4 library versions
+%% File to get Erlang distribution using SSL started
Modified: yxa/trunk/debian/patches/yxa_yaws_makefile.dpatch
URL: http://svn.debian.org/wsvn/pkg-voip/yxa/trunk/debian/patches/yxa_yaws_makefile.dpatch?rev=4812&op=diff
==============================================================================
--- yxa/trunk/debian/patches/yxa_yaws_makefile.dpatch (original)
+++ yxa/trunk/debian/patches/yxa_yaws_makefile.dpatch Mon Nov 5 14:50:38 2007
@@ -5,9 +5,9 @@
## DP: YXA embedded Yaws web server application makefile.
@DPATCH@
-diff -urNad yxa-1.0~rc1~/yaws/src/Makefile.in yxa-1.0~rc1/yaws/src/Makefile.in
---- yxa-1.0~rc1~/yaws/src/Makefile.in 2007-07-11 19:17:29.000000000 +0200
-+++ yxa-1.0~rc1/yaws/src/Makefile.in 2007-07-11 19:20:32.000000000 +0200
+diff -urNad yxa-1.0~rc2~/yaws/src/Makefile.in yxa-1.0~rc2/yaws/src/Makefile.in
+--- yxa-1.0~rc2~/yaws/src/Makefile.in 2007-10-17 14:46:31.000000000 +0200
++++ yxa-1.0~rc2/yaws/src/Makefile.in 2007-10-17 17:45:55.000000000 +0200
@@ -18,6 +18,21 @@
builddir = @builddir@
local_file = @local_file@
@@ -71,21 +71,8 @@
$(install_DATA) $$p $(DESTDIR)$(beamdir)/$$f ; \
done
for p in $(hrl_FILES); do \
-@@ -63,14 +89,23 @@
-
- clean:
- rm -f core *.core *~
-- rm -f *.beam *.script *.start *.boot *.rel *.app *.script
-+ rm -f *.beam *.script *.start *.boot *.app *.script *.rel
- rm -f *.o ktrace.out erl_crash.dump
-
- $(beam_FILES): $(yxa_hrl_FILES)
-
--SUFFIXES = .c .o .hrl .beam .erl .boot .rel .rel-in .app .app-in
-+SUFFIXES = .c .o .hrl .beam .erl .boot .rel .rel-in .app .app-in .rel-in
- .SUFFIXES:
--.SUFFIXES: .c .o .hrl .beam .erl .boot .rel .rel-in .app .app-in
-+.SUFFIXES: .c .o .hrl .beam .erl .boot .rel .rel-in .app .app-in .rel-in
+@@ -82,4 +108,13 @@
+ .SUFFIXES: .c .o .hrl .beam .erl .boot .rel .rel-in .app .app-in
.erl.beam:
- $(ERLC) -I$(srcdir) -I$(top_srcdir)/src/include/ -W +debug_info $<
More information about the Pkg-voip-commits
mailing list