[Pkg-voip-commits] r6730 - in /qutecom/tags/2.2~rc3.dfsg0-1/debian: changelog control copyright patches/debian/remove-old-ltmain.patch patches/series rules
cavedon-guest at alioth.debian.org
cavedon-guest at alioth.debian.org
Fri Feb 6 04:15:23 UTC 2009
Author: cavedon-guest
Date: Fri Feb 6 04:15:22 2009
New Revision: 6730
URL: http://svn.debian.org/wsvn/pkg-voip/?sc=1&rev=6730
Log:
* Move architecture independent data into a qutecom-data.
* Add debian/remove-old-ltmain.patch to prevent lintian ancient-libtool
warning.
* Update copyright information.
Added:
qutecom/tags/2.2~rc3.dfsg0-1/debian/patches/debian/remove-old-ltmain.patch
Modified:
qutecom/tags/2.2~rc3.dfsg0-1/debian/changelog
qutecom/tags/2.2~rc3.dfsg0-1/debian/control
qutecom/tags/2.2~rc3.dfsg0-1/debian/copyright
qutecom/tags/2.2~rc3.dfsg0-1/debian/patches/series
qutecom/tags/2.2~rc3.dfsg0-1/debian/rules
Modified: qutecom/tags/2.2~rc3.dfsg0-1/debian/changelog
URL: http://svn.debian.org/wsvn/pkg-voip/qutecom/tags/2.2%7Erc3.dfsg0-1/debian/changelog?rev=6730&op=diff
==============================================================================
--- qutecom/tags/2.2~rc3.dfsg0-1/debian/changelog (original)
+++ qutecom/tags/2.2~rc3.dfsg0-1/debian/changelog Fri Feb 6 04:15:22 2009
@@ -1,3 +1,14 @@
+qutecom (2.2~rc3.dfsg0-2) experimental; urgency=low
+
+ * Move architecture independent data into a qutecom-data.
+ * Add debian/remove-old-ltmain.patch to prevent lintian ancient-libtool
+ warning.
+ * Update copyright information.
+ * Previous uploads of qutecom were rejected because of incomplete copyright
+ file. Closes: #502151
+
+ -- Ludovico Cavedon <ludovico.cavedon at gmail.com> Thu, 01 Jan 2009 14:19:35 +0100
+
qutecom (2.2~rc3.dfsg0-1) experimental; urgency=low
* New upstream version. Closes: #502151
Modified: qutecom/tags/2.2~rc3.dfsg0-1/debian/control
URL: http://svn.debian.org/wsvn/pkg-voip/qutecom/tags/2.2%7Erc3.dfsg0-1/debian/control?rev=6730&op=diff
==============================================================================
--- qutecom/tags/2.2~rc3.dfsg0-1/debian/control (original)
+++ qutecom/tags/2.2~rc3.dfsg0-1/debian/control Fri Feb 6 04:15:22 2009
@@ -22,7 +22,7 @@
Package: qutecom
Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
+Depends: qutecom-data (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Replaces: wengophone
Description: SIP-based software telephone with video and chat features
QuteCom is a Voice-over-IP application based on standard protocols like SIP
@@ -32,6 +32,20 @@
.
QuteCom is the new name of the WengoPhone project, after it was dropped by
Wengo and taken on by MBDsys.
+
+Package: qutecom-data
+Architecture: all
+Depends: qutecom (= ${binary:Version})
+Description: SIP-based software telephone with video and chat features
+ QuteCom is a Voice-over-IP application based on standard protocols like SIP
+ and RTP. It enables voice, video and text chat between two clients. Features
+ include a contact list with multi-protocol presence and status, call history
+ and NAT traversal capability.
+ .
+ QuteCom is the new name of the WengoPhone project, after it was dropped by
+ Wengo and taken on by MBDsys.
+ .
+ This package contains architecture independet data, like images and sounds.
Package: qutecom-dbg
Architecture: any
Modified: qutecom/tags/2.2~rc3.dfsg0-1/debian/copyright
URL: http://svn.debian.org/wsvn/pkg-voip/qutecom/tags/2.2%7Erc3.dfsg0-1/debian/copyright?rev=6730&op=diff
==============================================================================
--- qutecom/tags/2.2~rc3.dfsg0-1/debian/copyright (original)
+++ qutecom/tags/2.2~rc3.dfsg0-1/debian/copyright Fri Feb 6 04:15:22 2009
@@ -6,9 +6,9 @@
It was downloaded from
http://www.qutecom.org/
-Copyright Holder: QuteCom Development Team <qutecom-dev at lists.qutecom.org>
- MDBSYS (http://www.mbdsys.com)
- OpenWengo Development Team (http://www.openwengo.org)
+Copyright Holder: 2008-2009 QuteCom Development Team <qutecom-dev at lists.qutecom.org>
+ 2008-2009 MDBSYS (http://www.mbdsys.com)
+ 2004-2007 OpenWengo Development Team (http://www.openwengo.org)
2004-2007 Wengo (http://www.wengo.fr)
Original Developers:
@@ -56,8 +56,7 @@
Seb Tricaud
Sherry Yang
-License:
-
+License: GPL-2+-BY-OpenSSL
This package is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -73,65 +72,12 @@
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
As a special exception, Wengo gives permission to link
- this program with the Qt Library (commercial or non-commercial edition),
- and distribute the resulting executable, without including the source
- code for the Qt library in the source distribution.
-
- As a special exception, Wengo gives permission to link
this program with the OpenSSL Library.
On Debian systems, the complete text of the GNU General Public License can be
found in `/usr/share/common-licenses/GPL'.
This software contains some files from the following other softwares:
-
-- phApi (wifo/phapi)
-Copyright (C) 2000 by Abramo Bagnara <abramo at alsa-project.org>
-Copyright (C) 2002-2003 Aymeric Moizard <jack at atosc.org>
-Copyright (C) 2004 Vadim Lebedev <vadim at mbdsys.com>
-Copyright (C) 2005-2007 Wengo
-Copyright (C) 2005 David Ferlier <david.ferlier at wengo.fr>
-published under GNU GPL
-
-- libpurple (libs/3rdparty/libpurple)
-Copyright (C) 1998-2008 Pidgin/libpurple development team
-published under GNU GPL
-
-- sVoIP (wifo/sVoIP)
-Copyright (C) 2006 Everbee Networks
-published under GNU GPL
-
-- SpanDSP (wifo/g722, wifo/g729)
-Copyright (C) 1993 CMU
-Copyright (C) 2001-2006 Steve Underwood <steveu at coppice.org>
-Copyright (C) 2006 Michael Jerris
-published under GNU GPL
-
-- eXosip (wifo/eXosip)
-Copyright (C) 2002-2003 Aymeric Moizard <jack at atosc.org>
-published under GNU GPL
-
-- oSIP (wifo/libosip2)
-Copyright (C) 2001-2005 Aymeric Moizard <jack at atosc.org>
-published under GNU LGPL
-On Debian systems, the complete text of the GNU Lesser General Public License
-can be found in `/usr/share/common-licenses/LGPL'.
-
-- oRTP (wifo/ortp)
-Copyright (C) 2001-2005 Simon Morlat
-published under GNU LGPL
-
-- trayicon (libs/trayicon)
-Copyright (C) 2003 Justin Karneges
-published under GNU LGPL
-
-- PSI (libs/3rdparty/psiidle)
-Copyright (C) 2003 Justin Karneges
-published under GNU LGPL
-
-- fidlib (wifo/phpai/fidlib)
-Copyright (c) 2002-2003 Jim Peters <http://uazu.net/>
-published under GNU LGPL
- OWbuild (owbuild)
Copyright (c) 2006-2007 Wengo
@@ -141,45 +87,49 @@
Copyright (c) 2006-2007 Andreas Schneider <mail at cynapses.org>
Copyright (C) 2008 MBDSYS
Copyright (c) 2008 Tarrisse Laurent <laurent at mbdsys.com>
-published under BSD license
-On Debian systems, the complete text of the BSD License can be found in
-`/usr/share/common-licenses/BSD'.
-
-- Google Breakpad (libs/3rdparty/googlebreakpad)
-Copyright (c) 2006 Google Inc.
-published under BSD license
+License: BSD-C3
+ On Debian systems, the complete text of the 3-clause BSD License can be found
+ in `/usr/share/common-licenses/BSD'.
+
+- phApi (wifo/phapi)
+Copyright (C) 2000 Abramo Bagnara <abramo at alsa-project.org>
+Copyright (C) 2000 Simon Morlat <simon.morlat at free.fr>
+Copyright (C) 2002-2003 Aymeric Moizard <jack at atosc.org>
+Copyright (C) 2004 Vadim Lebedev <vadim at mbdsys.com>
+Copyright (C) 2005-2007 Wengo
+Copyright (C) 2005 David Ferlier <david.ferlier at wengo.fr>
+License: GPL-2+
+ On Debian systems, the complete text of the GNU General Public License version
+ 2 can be found in `/usr/share/common-licenses/GPL-2'.
+
+- SpanDSP G722 codec (wifo/phapi/g722)
+Copyright (C) 1993 CMU, Computer Science, Speech Group, Chengxiang Lu and Alex Hauptmann
+Copyright (C) 2001-2006 Steve Underwood <steveu at coppice.org>
+License: PD
+ Despite my general liking of the GPL, I place my own contributions
+ to this code in the public domain for the benefit of all mankind -
+ even the slimy ones who might try to proprietize my work and use it
+ to my detriment.
+
+- SpanDSP G726 codec (wifo/phapi/g726)
+Copyright (C) 1993 CMU, Computer Science, Speech Group, Chengxiang Lu and Alex Hauptmann
+Copyright (C) 2001-2006 Steve Underwood <steveu at coppice.org>
+Copyright (C) 2006 Michael Jerris
+License: GPL-2+
+ On Debian systems, the complete text of the GNU General Public License version
+ 2 can be found in `/usr/share/common-licenses/GPL-2'.
+
+- fidlib (wifo/phpai/fidlib)
+Copyright (c) 2002-2003 Jim Peters <http://uazu.net/>
+License: LGPL-2.1
+ On Debian systems, the complete text of the GNU Lesser General Public License
+ version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
- spxec (wifo/phapi/speexec)
Copyright (C) 2003-2006 Jean-Marc Valin
-published under BSD license
-
-- srtp (wifo/srtp)
-Copyright (c) 2001-2005 Cisco Systems, Inc.
-published under BSD license
-
-- TinyXML (wifo/tinyxml)
-Copyright (C) 2000-2006 Lee Thomason (www.grinninglizard.com)
-published under zlib license
-License:
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any
- damages arising from the use of this software.
-
- Permission is granted to anyone to use this software for any
- purpose, including commercial applications, and to alter it and
- redistribute it freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product documentation
- would be appreciated but is not required.
-
- 2. Altered source versions must be plainly marked as such, and
- must not be misrepresented as being the original software.
-
- 3. This notice may not be removed or altered from any source
- distribution.
-
+License: BSD-C3
+ On Debian systems, the complete text of the 3-clause BSD License can be found
+ in `/usr/share/common-licenses/BSD'.
- GSM 06.10 lossy speech compression (wifo/phapi/gsm)
Copyright (C) 1992-1994 Jutta Degener and Carsten Bormann,
@@ -195,6 +145,35 @@
this software has found, about bugs in this software, and about any
improvements that may be of general interest.
+- Acoustic Echo Cancellation NLMS-pw algorithm (wifo/phapi/aec2.*)
+Copyright (C) 2004-2005 DFS Deutsche Flugsicherung
+License:
+ You are allowed to use this source code in any open source or closed
+ source software you want. You are allowed to use the algorithms for a
+ hardware solution. You are allowed to modify the source code.
+ You are not allowed to remove the name of the author from this memo or
+ from the source code files. You are not allowed to monopolize the
+ source code or the algorithms behind the source code as your
+ intellectual property.
+ This source code is free of royalty and comes with no warranty.
+
+- sVoIP (wifo/sVoIP)
+Copyright (C) 2006 Everbee Networks
+License: GPL-2+
+ On Debian systems, the complete text of the GNU General Public License version
+ 2 can be found in `/usr/share/common-licenses/GPL-2'.
+
+- eXosip (wifo/eXosip)
+Copyright (C) 2002-2003 Aymeric Moizard <jack at atosc.org>
+License: GPL-2+
+ On Debian systems, the complete text of the GNU General Public License version
+ 2 can be found in `/usr/share/common-licenses/GPL-2'.
+
+- oSIP (wifo/libosip2)
+Copyright (C) 2001-2005 Aymeric Moizard <jack at atosc.org>
+License: LGPL-2.1+
+ On Debian systems, the complete text of the GNU Lesser General Public License
+ version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
- MD5C wifo/libosip2/{src,include}/osipparser2/osip_md5c.*
Copyright (C) 1991-2, RSA Data Security, Inc.
@@ -217,12 +196,45 @@
These notices must be retained in any copies of any part of this
documentation and/or software.
+- oRTP (wifo/ortp)
+Copyright (C) 2001-2005 Simon Morlat
+License: LGPL-2.1+
+ On Debian systems, the complete text of the GNU Lesser General Public License
+ version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
+
+- srtp (wifo/srtp)
+Copyright (c) 2001-2005 Cisco Systems, Inc.
+License: BSD-C3
+ On Debian systems, the complete text of the 3-clause BSD License can be found
+ in `/usr/share/common-licenses/BSD'.
+
+- TinyXML (wifo/tinyxml)
+Copyright (C) 2000-2006 Lee Thomason (www.grinninglizard.com)
+published under zlib license
+License:
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any
+ damages arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any
+ purpose, including commercial applications, and to alter it and
+ redistribute it freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must
+ not claim that you wrote the original software. If you use this
+ software in a product, an acknowledgment in the product documentation
+ would be appreciated but is not required.
+
+ 2. Altered source versions must be plainly marked as such, and
+ must not be misrepresented as being the original software.
+
+ 3. This notice may not be removed or altered from any source
+ distribution.
- STUN client (wifo/phapi/stun, wifo/ortp/{src,include/srtp}/stun*,
wifo/netlib/src/{stun,udp}_*)
Copyright (C) 2000 Vovida Networks, Inc.
-The Vovida Software License, Version 1.0
-License:
+License: The Vovida Software License, Version 1.0
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
@@ -259,20 +271,6 @@
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
-
-- Acoustic Echo Cancellation NLMS-pw algorithm (wifo/phapi/aec2.*)
-Copyright (C) 2004-2005 DFS Deutsche Flugsicherung
-License:
- You are allowed to use this source code in any open source or closed
- source software you want. You are allowed to use the algorithms for a
- hardware solution. You are allowed to modify the source code.
- You are not allowed to remove the name of the author from this memo or
- from the source code files. You are not allowed to monopolize the
- source code or the algorithms behind the source code as your
- intellectual property.
- This source code is free of royalty and comes with no warranty.
-
-
- inet_ntop (wifo/owsl/src/core/owsl_address.c)
Copyright (C) 1996-2001 Internet Software Consortium
- MS dirent (wifo/phapi/msdirent, libs/owutil/cutil/src/msvc/dirent.c)
@@ -293,17 +291,574 @@
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+- trayicon (libs/trayicon)
+Copyright (C) 2003 Justin Karneges
+License: LGPL-2.1+
+ On Debian systems, the complete text of the GNU Lesser General Public License
+ version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
+
+- PSI (libs/3rdparty/psiidle)
+Copyright (C) 2003 Justin Karneges
+License: LGPL-2.1+
+ On Debian systems, the complete text of the GNU Lesser General Public License
+ version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
+
+- Google Breakpad (libs/3rdparty/googlebreakpad)
+Copyright (c) 2006 Google Inc.
+License: BSD-C3
+ On Debian systems, the complete text of the 3-clause BSD License can be found
+ in `/usr/share/common-licenses/BSD'.
+
+- libpurple (libs/3rdparty/libpurple)
+Copyright (C) 1998-2008 Pidgin/libpurple development team
+ Saleem Abdulrasool
+ Dave Ahlswede
+ Manuel Amador
+ Matt Amato
+ Geoffrey Antos
+ Daniel Atallah
+ Paul Aurich
+ Patrick Aussems
+ Anibal Avelar
+ Ali Albazaz
+ Christopher Ayoup
+ Alex Badea
+ John Bailey
+ R. Tyler Ballance
+ Chris Banal
+ Luca Barbato
+ Levi Bard
+ Ryan Barrett
+ Kevin Barry
+ Lukas Barth
+ Derek Battams
+ Martin Bayard
+ Curtis Beattie
+ Dave Bell
+ Igor Belyi
+ Brian Bernas
+ Paul Betts
+ Jonas Birmé
+ George-Cristian Bîrzan
+ Eric Blade
+ Ethan Blanton
+ Joshua Blanton
+ Rainer Blessing
+ Herman Bloggs
+ David Blue
+ Jason Boerner
+ Hylke Bons
+ Graham Booker
+ Paolo Borelli
+ Julien Bossart
+ Craig Boston
+ Chris Boyle
+ Derrick J Brashear
+ Mauro Sérgio Ferreira Brasil
+ Luke Bratch
+ Matt Brenneke
+ Jeremy Brooks
+ Jonathan Brossard
+ Jeffery Brown
+ Philip Brown
+ Dan Bruce
+ Norbert Buchmuller
+ Sean Burke
+ Thomas Butter
+ Trevor Caira
+ Andrea Canciani
+ Damien Carbery
+ Michael Carlson
+ Keegan Carruthers-Smith
+ Steve Cavilia
+ Julien Cegarra
+ Cerulean Studios, LLC
+ Jonathan Champ
+ Christophe Chapuis
+ Patrick Cheung
+ Ka-Hing Cheung
+ Sadrul Habib Chowdhury
+ Brian Chu
+ Arturo Cisneros, Jr.
+ Vincas Ciziunas
+ Jonathan Clark
+ Joe Clarke
+ Eoin Coffey
+ Jason Cohen
+ Todd Cohen
+ Graham Cole
+ Jono Cole
+ Lorenzo Colitti
+ Collabora Ltd.
+ Jeff Connelly
+ Nathan Conrad
+ Felipe Contreras
+ Alex Converse
+ Irving Cordova
+ Glauber de Oliveira Costa
+ Adam Cowell
+ Palmer Cox
+ Jeramey Crawford
+ Michael Culbertson
+ Steven Danna
+ Chris Davies
+ Josh Davis
+ Martijn Dekker
+ Florian Delizy
+ Vinicius Depizzol
+ Philip Derrin
+ Taso N. Devetzis
+ Balwinder Singh Dheeman
+ Andrew Dieffenbach
+ Finlay Dobbie
+ Mark Doliner
+ Nuno Donato
+ Jim Duchek
+ Alex Duggan
+ Tom Dyas
+ Marc E.
+ Andrew Echols
+ John Eckerdal
+ Sean Egan <seanegan at gmail.com>
+ William Ehlhardt
+ Markus Elfring
+ Nelson Elhage
+ Ignacio J. Elia
+ Brian Enigma
+ Mattias Eriksson
+ Stefan Esser
+ Steffen Eschenbacher
+ Marc Etcheverry
+ David Everly
+ Larry Ewing
+ Gábor Farkas
+ Jesse Farmer
+ Gavan Fantom (gavan)
+ Leonardo Fernandes
+ David Fiander
+ Rob Flynn <gaim at robflynn.com>
+ Rob Foehl (rwf)
+ Alan Ford
+ Nathan Fredrickson
+ Chris J. Friesen
+ Free Software Foundation
+ Decklin Foster
+ Francesco Fracassi
+ Adam Fritzler
+ Takao Fujiwara
+ Max G.
+ François Gagné
+ Andrew Gaul
+ Evgueni V. Gavrilov
+ Ignacy Gawedzki
+ Georgi Georgiev
+ Thomas Gibson-Robinson
+ Ike Gingerich
+ Gustavo Giráldez
+ Richard Gobeille
+ Ian Goldberg
+ Matthew Goldstein
+ Michael Golden
+ Charlie Gordon
+ Ryan C. Gordon
+ Konrad Gräfe
+ Miah Gregory
+ David Grohmann
+ Christian Grothoff
+ Vladislav Guberinić
+ Gideon N. Guillen
+ Christian Hammond
+ Erick Hamness
+ Fred Hampton
+ John Hanauer
+ Phil Hannent
+ Casey Harkins
+ Andy Harrison
+ Andrew Hart (arhart)
+ Anders Hasselqvist
+ Rene Hausleitner
+ Will Hawkins
+ G. Sumner Hayes
+ Michael R. Head
+ Nick Hebner
+ Mike Heffner
+ Justin Heiner
+ Moos Heintzen
+ Benjamin Herrenschmidt
+ Fernando Herrera
+ hjheins
+ Hil
+ Casey Ho
+ Andrew Hoffman
+ Iain Holmes
+ Joshua Honeycutt
+ Nigel Horne
+ Jensen Hornick
+ Juanjo Molinero Horno
+ Dustin Howett
+ Nathanael Hoyle
+ Greg Hudson
+ Magnus Hult
+ Karsten Huneycutt
+ Andrew Hunt
+ Kevin Hunter
+ Rian Hunter
+ Thomas Huriaux
+ Instant Messaging Freedom, Inc.
+ Vitaliy Ischenko
+ Intel Corporation
+ Scott Jackson
+ Hans Petter Jansson
+ Henry Jen
+ Benjamin Kahn
+ Anders Kaseorg
+ Praveen Karadakal
+ John Kelm
+ Jochen Kemnade
+ Akuke Kok
+ Konstantin Korikov
+ Cole Kowalski
+ Matt Kramer
+ Gary Kramlich
+ Jan Kratochvil
+ Andrej KrivulÄÃk
+ Patrik Kullman
+ Tuomas Kuosmanen
+ Tero Kuusela
+ Richard Laager
+ Scott Lamb
+ Dennis Lambe Jr.
+ Joe LaPenna
+ Steve Láposi
+ Daniel Larsson
+ Peter Lawler
+ Ho-seok Lee
+ Jean-Yves Lefort
+ Moses Lei
+ Ambrose C. Li
+ Nicolas Lichtmaier
+ Wesley Lin
+ Artem Litvinovich
+ Josh Littlefield
+ Daniel Ljungborg
+ Syd Logan
+ Lokheed
+ Norberto Lopes
+ Shlomi Loubaton
+ Uli Luckas
+ Matthew Luckie
+ Marcus Lundblad
+ Mike Lundy
+ Jason Lynch
+ Iain MacDonnell
+ Lucio Maciel
+ Brian Macke
+ Paolo Maggi
+ Willian T. Mahan
+ Kris Marsh
+ Fidel Martinez
+ Lalo Martins
+ John Matthews
+ Simo Mattila
+ Michal Matyska
+ Ryan McCabe
+ Peter McCurdy
+ Kurt McKee
+ Torrey McMahon
+ Robert McQueen
+ Mihály Mészáros
+ Robert Mibus
+ Lars T. Mikkelsen
+ Benjamin Miller
+ Kevin Miller
+ Paul Miller
+ Arkadiusz Miskiewicz
+ David Mohr
+ Andrew Molloy
+ Michael Monreal
+ Marco Monteiro
+ Benjamin Moody
+ John Moody
+ Tim Mooney
+ Sergio Moretto
+ Andrei Mozzhuhin
+ Christian Muise
+ Richard Nelson
+ Dennis Nezic
+ Matthew A. Nicholson
+ Andreas Nilsson
+ Henning Norén
+ Szilard Novaki
+ Novell
+ Padraig O'Briain
+ Christopher O'Brien (siege)
+ Peter O'Gorman
+ Jon Oberheide
+ Yusuke Odate
+ Ruediger Oertel
+ Gudmundur Bjarni Olafsson
+ Bartosz Oler
+ Oliver
+ Stefan Ott
+ Shawn Outman
+ Nathan Owens (pianocomp81)
+ John Oyler
+ Matt Pandina
+ Laszlo Pandy
+ Giulio 'Twain28' Pascali
+ Ricardo Fernandez Pascual
+ Riley Patterson
+ Havoc Pennington
+ Ted Percival
+ Eduardo Pérez
+ Matt Perry
+ Nathan Peterson
+ Sebastián E. Peyrott
+ Celso Pinto
+ Joao LuÃs Marques Pinto
+ Aleksander Piotrowski
+ Julien Pivotto
+ Eric Polino <aluink at gmail.com>
+ Ari Pollak
+ Robey Pointer
+ Eric Polino
+ Stephen Pope
+ Nathan Poznick
+ Jory A. Pratt
+ Brent Priddy
+ Justin Pryzby
+ Florian Qu?ze
+ Ignacio Casal Quinteiro
+ Federicco Mena Quintero
+ Yosef Radchenko
+ David Raeman
+ R. Ramkumar
+ Mart Raudsepp
+ Etan Reisner
+ Kristian Rietveld
+ Pekka Riikonen
+ Tim Ringenbach
+ Dennis Ristuccia
+ Lee Roach
+ Eion Robb
+ Rhett Robinson
+ Luciano Miguel Ferreira Rocha
+ Andrew Rodland
+ Miguel RodrÃguez (migrax)
+ Bob Rossi
+ Jason Roth
+ Jean-Francois Roy
+ Peter Ruibal
+ Michael Ruprecht
+ Sam S.
+ Thanumalayan S.
+ Elliott Sales de Andrade
+ Tomasz Sałaciński <tsalacinski at gmail.com>
+ Pradyumna Sampath
+ Arvind Samptur
+ Tom Samstag
+ Neil Sanchala
+ Laurent Sansonetti
+ Andrew Sayman
+ Alceste Scalas
+ Carsten Schaar
+ Toby Schaffer
+ Jonathan Schleifer <js-pidgin at webkeks.org>
+ Matteo Settenvini
+ Colin Seymour
+ Luke Schierer
+ Ralph Schmieder
+ David Schmitt
+ Mark Schneider
+ Evan Schoenberg
+ Gabriel Schulhof
+ Eric Michael Schwelm
+ Federico Schwindt
+ Torrey Searle
+ Peter Seebach
+ Don Seiler
+ Leonardo Serra
+ Jim Seymour
+ Javeed Shaikh
+ Joe Shaw
+ Scott Shedden
+ Dossy Shiobara
+ Michael Shkutkov
+ Shreevatsa R
+ Dylan Simon <dylan at dylex.net>
+ Ettore Simone
+ John Silvestri
+ Mukund Sivaraman
+ Craig Slusher
+ Alex Smith
+ Brad Smith
+ Malcolm Smith
+ David Smock
+ Phil Snowberger
+ Eddie Sohn (tr1sk)
+ Sony Computer Entertainment America, Inc.
+ Andy Spencer
+ Mark Spencer
+ Peter Speybrouck
+ Lex Spoon
+ Chris Stafford
+ Kevin Stange
+ Jakub Steiner
+ Richard Stellingwerff
+ Charlie Stockman
+ David Stoddard
+ Adam Strzelecki
+ Andreas Stührk
+ Oleg Sukhodolsky
+ Sun Microsystems
+ MÃ¥rten Svantesson (fursten)
+ Amir Szekely (kichik)
+ Robert T.
+ Greg Taeger
+ Peter Tang
+ Brian Tarricone
+ Peter Teichman
+ Philip Tellis
+ Arun A. Tharuvai
+ Cestonaro Thilo
+ Will Thompson
+ Douglas Thrift (douglaswth)
+ Mark Tiefenbruck
+ Andrew Tinney
+ Jeffery To
+ Warren Togami
+ Stu Tomlinson
+ Bill Tompkins
+ Gal Topper
+ Chris Toshok
+ Ken Tossell
+ Marcus Trautwig
+ Tom Tromey
+ Todd Troxell
+ Brad Turcotte
+ Kyle Turman
+ Junichi Uekawa
+ Igor Vlasenko
+ István Váradi
+ Martijn van Beers
+ Arjan van de Ven
+ Philip Van Hoof
+ Kristof Vansant
+ James Vega
+ David Vermeille
+ Sid Vicious
+ Jorge Villaseñor (Masca)
+ Bjoern Voigt
+ Wan Hing Wah
+ Philip Walford
+ Nathan Walp
+ Jonty Wareing
+ Eric Warmenhoven
+ Adam J. Warrington
+ Denis Washington
+ Zsombor Welker
+ Andrew Wellington
+ Adam Wendt
+ Simon Wenner
+ Dave West
+ Zac West
+ Daniel Westermann-Clark
+ Andrew Whewell
+ Simon Wilkinson
+ Dan Willemsen
+ Justin Williams (Jaywalker)
+ Jason Willis
+ Matt Wilson
+ Dan Winship
+ Scott Wolchok
+ The Written Word, Inc.
+ Kevin Wu Won
+ Pui Lam Wong
+ Justin Wood
+ Ximian
+ Ma Xuan
+ Jared Yanovich
+ Timmy Yee
+ Nickolai Zeldovich
+ Marco Ziech
+ Piotr Zielinski
+ Jeroen Zwartepoorte
+License: GPL-2+
+ On Debian systems, the complete text of the GNU General Public License version
+ 2 can be found in `/usr/share/common-licenses/GPL-2'.
+
+- libpurple GG protocol plugin (libs/3rdparty/libpurple/protocols/gg/lib
+Copyright (C) 2001-2003 Wojtek Kaniewski <wojtekka at irc.pl>
+ Robert J. Woźny <speedy at ziew.org>
+ Arkadiusz Miśkiewicz <arekm at pld-linux.org>
+ Tomasz Chiliński <chilek at chilan.com>
+License: LGPL-2.1+
+ On Debian systems, the complete text of the GNU Lesser General Public License
+ version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1'.
+
+- libpurple Oscar protocol plugin (libs/3rdparty/libpurple/protocols/oscar)
+Copyright (C) 2007 ComBOTS Product GmbH (htfv) <foss at combots.com>
+Copyright (C) 2005-2006 Jonathan Clark <ardentlygnarley a.t users d.o.t sourceforge d.o.t net>
+Copyright (C) 2001-2006 Mark Doliner <thekingant a.t users d.o.t sourceforge d.o.t net>
+Copyright (C) 1998-2001 Adam Fritzler <mid a.t auk d.o.t cx>
+ Josh Myer <josh a.t joshisanerd d.o.t com>
+ Daniel M. Pomerantz
+ Daniel Reed <n a.t ml d.o.t org>
+ Eric Warmenhoven <warmenhoven a.t linux d.o.t com>
+ Brock Wilcox <awwaiid a.t auk d.o.t cx>
+License: LGPL-2+
+ On Debian systems, the complete text of the GNU Lesser General Public License
+ version 2 can be found in `/usr/share/common-licenses/LGPL-2'.
+
+- libpurple Zephyr protocol plugin (libs/3rdparty/libpurple/protocols/zephyr)
+Copyright (C) 1997-1998 Massachusetts Institute of Technology
+License: MIT
+ Permission to use, copy, modify, and distribute this software and its
+ documentation for any purpose and without fee is hereby granted,
+ provided that the above copyright notice appear in all copies and that
+ both that copyright notice and this permission notice appear in
+ supporting documentation, and that the name of the Massachusetts
+ Institute of Technology (M.I.T.) not be used in advertising or publicity
+ pertaining to distribution of the software without specific, written
+ prior permission.
+
+ M.I.T. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+ M.I.T. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+ WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ SOFTWARE.
+Copyright (C) 1987-1989 Student Information Processing Board of the
+ Massachusetts Institute of Technology
+License:
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is
+ hereby granted, provided that the above copyright notice
+ appear in all copies and that both that copyright notice and
+ this permission notice appear in supporting documentation,
+ and that the names of M.I.T. and the M.I.T. S.I.P.B. not be
+ used in advertising or publicity pertaining to distribution
+ of the software without specific, written prior permission.
+ M.I.T. and the M.I.T. S.I.P.B. make no representations about
+ the suitability of this software for any purpose. It is
+ provided "as is" without express or implied warranty.
- Emoticons
Copyright (C) Nuno Pinheiro (http://pinheiro-kde.blogspot.com/)
-published under GNU GPL
+License: GPL-2+
+ On Debian systems, the complete text of the GNU General Public License version
+ 2 can be found in `/usr/share/common-licenses/GPL-2'.
- Flags icons
Copyright: Mark James (http://www.famfamfam.com/)
-License:
- These flag icons are available for free use for any purpose with no
- requirement for attribution.
-
-The Debian packaging is (C) 2008, Ludovico Cavedon <ludovico.cavedon at gmail.com>
-and is licensed under the GPL, see above.
-
+License: PD
+ These flag icons are available for free use for any purpose with no
+ requirement for attribution.
+
+- Debian packaging (debian)
+Copyright (C) 2007-2009 Ludovico Cavedon <ludovico.cavedon at gmail.com>
+Copyright (C) 2006-2009 Marco Nenciarini <mnencia at debian.org>
+License: GPL-2+
+ On Debian systems, the complete text of the GNU Lesser General Public License
+ version 2 can be found in `/usr/share/common-licenses/LGPL-2'.
Added: qutecom/tags/2.2~rc3.dfsg0-1/debian/patches/debian/remove-old-ltmain.patch
URL: http://svn.debian.org/wsvn/pkg-voip/qutecom/tags/2.2%7Erc3.dfsg0-1/debian/patches/debian/remove-old-ltmain.patch?rev=6730&op=file
==============================================================================
--- qutecom/tags/2.2~rc3.dfsg0-1/debian/patches/debian/remove-old-ltmain.patch (added)
+++ qutecom/tags/2.2~rc3.dfsg0-1/debian/patches/debian/remove-old-ltmain.patch Fri Feb 6 04:15:22 2009
@@ -1,0 +1,5156 @@
+Index: qutecom-2.2~rc3.dfsg0/wifo/eXosip/scripts/ltmain.sh
+===================================================================
+--- qutecom-2.2~rc3.dfsg0.orig/wifo/eXosip/scripts/ltmain.sh 2009-01-01 14:18:52.000000000 +0100
++++ /dev/null 1970-01-01 00:00:00.000000000 +0000
+@@ -1,5151 +0,0 @@
+-# ltmain.sh - Provide generalized library-building support services.
+-# NOTE: Changing this file will not affect anything until you rerun configure.
+-#
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+-# Free Software Foundation, Inc.
+-# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+-#
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2 of the License, or
+-# (at your option) any later version.
+-#
+-# This program is distributed in the hope that it will be useful, but
+-# WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+-# General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-#
+-# As a special exception to the GNU General Public License, if you
+-# distribute this file as part of a program that contains a
+-# configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
+-
+-# Check that we have a working $echo.
+-if test "X$1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X$1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+- # Yippee, $echo works!
+- :
+-else
+- # Restart under the correct shell, and then maybe $echo will work.
+- exec $SHELL "$0" --no-reexec ${1+"$@"}
+-fi
+-
+-if test "X$1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<EOF
+-$*
+-EOF
+- exit 0
+-fi
+-
+-# define SED for historic ltconfig's generated by Libtool 1.3
+-test -z "$SED" && SED=sed
+-
+-# The name of this program.
+-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
+-modename="$progname"
+-
+-# Constants.
+-PROGRAM=ltmain.sh
+-PACKAGE=libtool
+-VERSION=1.4.3
+-TIMESTAMP=" (1.922.2.111 2002/10/23 02:54:36)"
+-
+-default_mode=
+-help="Try \`$progname --help' for more information."
+-magic="%%%MAGIC variable%%%"
+-mkdir="mkdir"
+-mv="mv -f"
+-rm="rm -f"
+-
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-Xsed="${SED}"' -e 1s/^X//'
+-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+-# test EBCDIC or ASCII
+-case `echo A|od -x` in
+- *[Cc]1*) # EBCDIC based system
+- SP2NL="tr '\100' '\n'"
+- NL2SP="tr '\r\n' '\100\100'"
+- ;;
+- *) # Assume ASCII based system
+- SP2NL="tr '\040' '\012'"
+- NL2SP="tr '\015\012' '\040\040'"
+- ;;
+-esac
+-
+-# NLS nuisances.
+-# Only set LANG and LC_ALL to C if already set.
+-# These must not be set unconditionally because not all systems understand
+-# e.g. LANG=C (notably SCO).
+-# We save the old values to restore during execute mode.
+-if test "${LC_ALL+set}" = set; then
+- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+-fi
+-if test "${LANG+set}" = set; then
+- save_LANG="$LANG"; LANG=C; export LANG
+-fi
+-
+-# Make sure IFS has a sensible default
+-: ${IFS=" "}
+-
+-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+- echo "$modename: not configured to build any kind of library" 1>&2
+- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+- exit 1
+-fi
+-
+-# Global variables.
+-mode=$default_mode
+-nonopt=
+-prev=
+-prevopt=
+-run=
+-show="$echo"
+-show_help=
+-execute_dlfiles=
+-lo2o="s/\\.lo\$/.${objext}/"
+-o2lo="s/\\.${objext}\$/.lo/"
+-
+-# Parse our command line options once, thoroughly.
+-while test $# -gt 0
+-do
+- arg="$1"
+- shift
+-
+- case $arg in
+- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+- *) optarg= ;;
+- esac
+-
+- # If the previous option needs an argument, assign it.
+- if test -n "$prev"; then
+- case $prev in
+- execute_dlfiles)
+- execute_dlfiles="$execute_dlfiles $arg"
+- ;;
+- *)
+- eval "$prev=\$arg"
+- ;;
+- esac
+-
+- prev=
+- prevopt=
+- continue
+- fi
+-
+- # Have we seen a non-optional argument yet?
+- case $arg in
+- --help)
+- show_help=yes
+- ;;
+-
+- --version)
+- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+- exit 0
+- ;;
+-
+- --config)
+- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+- exit 0
+- ;;
+-
+- --debug)
+- echo "$progname: enabling shell trace mode"
+- set -x
+- ;;
+-
+- --dry-run | -n)
+- run=:
+- ;;
+-
+- --features)
+- echo "host: $host"
+- if test "$build_libtool_libs" = yes; then
+- echo "enable shared libraries"
+- else
+- echo "disable shared libraries"
+- fi
+- if test "$build_old_libs" = yes; then
+- echo "enable static libraries"
+- else
+- echo "disable static libraries"
+- fi
+- exit 0
+- ;;
+-
+- --finish) mode="finish" ;;
+-
+- --mode) prevopt="--mode" prev=mode ;;
+- --mode=*) mode="$optarg" ;;
+-
+- --preserve-dup-deps) duplicate_deps="yes" ;;
+-
+- --quiet | --silent)
+- show=:
+- ;;
+-
+- -dlopen)
+- prevopt="-dlopen"
+- prev=execute_dlfiles
+- ;;
+-
+- -*)
+- $echo "$modename: unrecognized option \`$arg'" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- ;;
+-
+- *)
+- nonopt="$arg"
+- break
+- ;;
+- esac
+-done
+-
+-if test -n "$prevopt"; then
+- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+-fi
+-
+-# Mandrake: (gc) It's bad to link C++ code with GCC, so we need to use the compiler name if provided
+-if test "$mode" = link && test -n "$archive_cmds" && test -x "/usr/bin/perl"; then
+- case $nonopt in
+- *cc | *++ | gcc* | *-gcc* | egcs*)
+- archive_cmds=`echo $archive_cmds | perl -pe 's/^\S+\s+//'`
+- archive_cmds="$nonopt $archive_cmds"
+- archive_expsym_cmds=`echo $archive_expsym_cmds | perl -pe 's/^\S+\s+//'`
+- archive_expsym_cmds="$nonopt $archive_expsym_cmds"
+- esac
+-fi
+-
+-# If this variable is set in any of the actions, the command in it
+-# will be execed at the end. This prevents here-documents from being
+-# left over by shells.
+-exec_cmd=
+-
+-if test -z "$show_help"; then
+-
+- # Infer the operation mode.
+- if test -z "$mode"; then
+- case $nonopt in
+- *cc | *++ | gcc* | *-gcc* | xlc*)
+- mode=link
+- for arg
+- do
+- case $arg in
+- -c)
+- mode=compile
+- break
+- ;;
+- esac
+- done
+- ;;
+- *db | *dbx | *strace | *truss)
+- mode=execute
+- ;;
+- *install*|cp|mv)
+- mode=install
+- ;;
+- *rm)
+- mode=uninstall
+- ;;
+- *)
+- # If we have no mode, but dlfiles were specified, then do execute mode.
+- test -n "$execute_dlfiles" && mode=execute
+-
+- # Just use the default operation mode.
+- if test -z "$mode"; then
+- if test -n "$nonopt"; then
+- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+- else
+- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+- fi
+- fi
+- ;;
+- esac
+- fi
+-
+- # Only execute mode is allowed to have -dlopen flags.
+- if test -n "$execute_dlfiles" && test "$mode" != execute; then
+- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- # Change the help message to a mode-specific one.
+- generic_help="$help"
+- help="Try \`$modename --help --mode=$mode' for more information."
+-
+- # These modes are in order of execution frequency so that they run quickly.
+- case $mode in
+- # libtool compile mode
+- compile)
+- modename="$modename: compile"
+- # Get the compilation command and the source file.
+- base_compile=
+- prev=
+- lastarg=
+- srcfile="$nonopt"
+- suppress_output=
+-
+- user_target=no
+- for arg
+- do
+- case $prev in
+- "") ;;
+- xcompiler)
+- # Aesthetically quote the previous argument.
+- prev=
+- lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-
+- case $arg in
+- # Double-quote args containing other shell metacharacters.
+- # Many Bourne shells cannot handle close brackets correctly
+- # in scan sets, so we specify it separately.
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- arg="\"$arg\""
+- ;;
+- esac
+-
+- # Add the previous argument to base_compile.
+- if test -z "$base_compile"; then
+- base_compile="$lastarg"
+- else
+- base_compile="$base_compile $lastarg"
+- fi
+- continue
+- ;;
+- esac
+-
+- # Accept any command-line options.
+- case $arg in
+- -o)
+- if test "$user_target" != "no"; then
+- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+- exit 1
+- fi
+- user_target=next
+- ;;
+-
+- -static)
+- build_old_libs=yes
+- continue
+- ;;
+-
+- -prefer-pic)
+- pic_mode=yes
+- continue
+- ;;
+-
+- -prefer-non-pic)
+- pic_mode=no
+- continue
+- ;;
+-
+- -Xcompiler)
+- prev=xcompiler
+- continue
+- ;;
+-
+- -Wc,*)
+- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+- lastarg=
+- save_ifs="$IFS"; IFS=','
+- for arg in $args; do
+- IFS="$save_ifs"
+-
+- # Double-quote args containing other shell metacharacters.
+- # Many Bourne shells cannot handle close brackets correctly
+- # in scan sets, so we specify it separately.
+- case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- arg="\"$arg\""
+- ;;
+- esac
+- lastarg="$lastarg $arg"
+- done
+- IFS="$save_ifs"
+- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+-
+- # Add the arguments to base_compile.
+- if test -z "$base_compile"; then
+- base_compile="$lastarg"
+- else
+- base_compile="$base_compile $lastarg"
+- fi
+- continue
+- ;;
+- esac
+-
+- case $user_target in
+- next)
+- # The next one is the -o target name
+- user_target=yes
+- continue
+- ;;
+- yes)
+- # We got the output file
+- user_target=set
+- libobj="$arg"
+- continue
+- ;;
+- esac
+-
+- # Accept the current argument as the source file.
+- lastarg="$srcfile"
+- srcfile="$arg"
+-
+- # Aesthetically quote the previous argument.
+-
+- # Backslashify any backslashes, double quotes, and dollar signs.
+- # These are the only characters that are still specially
+- # interpreted inside of double-quoted scrings.
+- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+-
+- # Double-quote args containing other shell metacharacters.
+- # Many Bourne shells cannot handle close brackets correctly
+- # in scan sets, so we specify it separately.
+- case $lastarg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- lastarg="\"$lastarg\""
+- ;;
+- esac
+-
+- # Add the previous argument to base_compile.
+- if test -z "$base_compile"; then
+- base_compile="$lastarg"
+- else
+- base_compile="$base_compile $lastarg"
+- fi
+- done
+-
+- case $user_target in
+- set)
+- ;;
+- no)
+- # Get the name of the library object.
+- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+- ;;
+- *)
+- $echo "$modename: you must specify a target with \`-o'" 1>&2
+- exit 1
+- ;;
+- esac
+-
+- # Recognize several different file suffixes.
+- # If the user specifies -o file.o, it is replaced with file.lo
+- xform='[cCFSfmso]'
+- case $libobj in
+- *.ada) xform=ada ;;
+- *.adb) xform=adb ;;
+- *.ads) xform=ads ;;
+- *.asm) xform=asm ;;
+- *.c++) xform=c++ ;;
+- *.cc) xform=cc ;;
+- *.cpp) xform=cpp ;;
+- *.cxx) xform=cxx ;;
+- *.f90) xform=f90 ;;
+- *.for) xform=for ;;
+- esac
+-
+- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+-
+- case $libobj in
+- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+- *)
+- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+- exit 1
+- ;;
+- esac
+-
+- if test -z "$base_compile"; then
+- $echo "$modename: you must specify a compilation command" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- # Delete any leftover library objects.
+- if test "$build_old_libs" = yes; then
+- removelist="$obj $libobj"
+- else
+- removelist="$libobj"
+- fi
+-
+- $run $rm $removelist
+- trap "$run $rm $removelist; exit 1" 1 2 15
+-
+- # On Cygwin there's no "real" PIC flag so we must build both object types
+- case $host_os in
+- cygwin* | mingw* | pw32* | os2*)
+- pic_mode=default
+- ;;
+- esac
+- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+- # non-PIC code in shared libraries is not supported
+- pic_mode=default
+- fi
+-
+- # Calculate the filename of the output object if compiler does
+- # not support -o with -c
+- if test "$compiler_c_o" = no; then
+- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+- lockfile="$output_obj.lock"
+- removelist="$removelist $output_obj $lockfile"
+- trap "$run $rm $removelist; exit 1" 1 2 15
+- else
+- need_locks=no
+- lockfile=
+- fi
+-
+- # Lock this critical section if it is needed
+- # We use this script file to make the link, it avoids creating a new file
+- if test "$need_locks" = yes; then
+- until $run ln "$0" "$lockfile" 2>/dev/null; do
+- $show "Waiting for $lockfile to be removed"
+- sleep 2
+- done
+- elif test "$need_locks" = warn; then
+- if test -f "$lockfile"; then
+- echo "\
+-*** ERROR, $lockfile exists and contains:
+-`cat $lockfile 2>/dev/null`
+-
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together. If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
+-
+- $run $rm $removelist
+- exit 1
+- fi
+- echo $srcfile > "$lockfile"
+- fi
+-
+- if test -n "$fix_srcfile_path"; then
+- eval srcfile=\"$fix_srcfile_path\"
+- fi
+-
+- # Only build a PIC object if we are building libtool libraries.
+- if test "$build_libtool_libs" = yes; then
+- # Without this assignment, base_compile gets emptied.
+- fbsd_hideous_sh_bug=$base_compile
+-
+- if test "$pic_mode" != no; then
+- # All platforms use -DPIC, to notify preprocessed assembler code.
+- command="$base_compile $srcfile $pic_flag -DPIC"
+- else
+- # Don't build PIC code
+- command="$base_compile $srcfile"
+- fi
+- if test "$build_old_libs" = yes; then
+- lo_libobj="$libobj"
+- dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$dir" = "X$libobj"; then
+- dir="$objdir"
+- else
+- dir="$dir/$objdir"
+- fi
+- libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+-
+- if test -d "$dir"; then
+- $show "$rm $libobj"
+- $run $rm $libobj
+- else
+- $show "$mkdir $dir"
+- $run $mkdir $dir
+- status=$?
+- if test $status -ne 0 && test ! -d $dir; then
+- exit $status
+- fi
+- fi
+- fi
+- if test "$compiler_o_lo" = yes; then
+- output_obj="$libobj"
+- command="$command -o $output_obj"
+- elif test "$compiler_c_o" = yes; then
+- output_obj="$obj"
+- command="$command -o $output_obj"
+- fi
+-
+- $run $rm "$output_obj"
+- $show "$command"
+- if $run eval "$command"; then :
+- else
+- test -n "$output_obj" && $run $rm $removelist
+- exit 1
+- fi
+-
+- if test "$need_locks" = warn &&
+- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+- echo "\
+-*** ERROR, $lockfile contains:
+-`cat $lockfile 2>/dev/null`
+-
+-but it should contain:
+-$srcfile
+-
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together. If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
+-
+- $run $rm $removelist
+- exit 1
+- fi
+-
+- # Just move the object if needed, then go on to compile the next one
+- if test x"$output_obj" != x"$libobj"; then
+- $show "$mv $output_obj $libobj"
+- if $run $mv $output_obj $libobj; then :
+- else
+- error=$?
+- $run $rm $removelist
+- exit $error
+- fi
+- fi
+-
+- # If we have no pic_flag, then copy the object into place and finish.
+- if (test -z "$pic_flag" || test "$pic_mode" != default) &&
+- test "$build_old_libs" = yes; then
+- # Rename the .lo from within objdir to obj
+- if test -f $obj; then
+- $show $rm $obj
+- $run $rm $obj
+- fi
+-
+- $show "$mv $libobj $obj"
+- if $run $mv $libobj $obj; then :
+- else
+- error=$?
+- $run $rm $removelist
+- exit $error
+- fi
+-
+- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$xdir" = "X$obj"; then
+- xdir="."
+- else
+- xdir="$xdir"
+- fi
+- baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+- libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+- # Now arrange that obj and lo_libobj become the same file
+- $show "(cd $xdir && $LN_S $baseobj $libobj)"
+- if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+- # Unlock the critical section if it was locked
+- if test "$need_locks" != no; then
+- $run $rm "$lockfile"
+- fi
+- exit 0
+- else
+- error=$?
+- $run $rm $removelist
+- exit $error
+- fi
+- fi
+-
+- # Allow error messages only from the first compilation.
+- suppress_output=' >/dev/null 2>&1'
+- fi
+-
+- # Only build a position-dependent object if we build old libraries.
+- if test "$build_old_libs" = yes; then
+- if test "$pic_mode" != yes; then
+- # Don't build PIC code
+- command="$base_compile $srcfile"
+- else
+- # All platforms use -DPIC, to notify preprocessed assembler code.
+- command="$base_compile $srcfile $pic_flag -DPIC"
+- fi
+- if test "$compiler_c_o" = yes; then
+- command="$command -o $obj"
+- output_obj="$obj"
+- fi
+-
+- # Suppress compiler output if we already did a PIC compilation.
+- command="$command$suppress_output"
+- $run $rm "$output_obj"
+- $show "$command"
+- if $run eval "$command"; then :
+- else
+- $run $rm $removelist
+- exit 1
+- fi
+-
+- if test "$need_locks" = warn &&
+- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+- echo "\
+-*** ERROR, $lockfile contains:
+-`cat $lockfile 2>/dev/null`
+-
+-but it should contain:
+-$srcfile
+-
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together. If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
+-
+- $run $rm $removelist
+- exit 1
+- fi
+-
+- # Just move the object if needed
+- if test x"$output_obj" != x"$obj"; then
+- $show "$mv $output_obj $obj"
+- if $run $mv $output_obj $obj; then :
+- else
+- error=$?
+- $run $rm $removelist
+- exit $error
+- fi
+- fi
+-
+- # Create an invalid libtool object if no PIC, so that we do not
+- # accidentally link it into a program.
+- if test "$build_libtool_libs" != yes; then
+- $show "echo timestamp > $libobj"
+- $run eval "echo timestamp > \$libobj" || exit $?
+- else
+- # Move the .lo from within objdir
+- $show "$mv $libobj $lo_libobj"
+- if $run $mv $libobj $lo_libobj; then :
+- else
+- error=$?
+- $run $rm $removelist
+- exit $error
+- fi
+- fi
+- fi
+-
+- # Unlock the critical section if it was locked
+- if test "$need_locks" != no; then
+- $run $rm "$lockfile"
+- fi
+-
+- exit 0
+- ;;
+-
+- # libtool link mode
+- link | relink)
+- modename="$modename: link"
+- case $host in
+- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+- # It is impossible to link a dll without this setting, and
+- # we shouldn't force the makefile maintainer to figure out
+- # which system we are compiling for in order to pass an extra
+- # flag for every libtool invokation.
+- # allow_undefined=no
+-
+- # FIXME: Unfortunately, there are problems with the above when trying
+- # to make a dll which has undefined symbols, in which case not
+- # even a static library is built. For now, we need to specify
+- # -no-undefined on the libtool link line when we can be certain
+- # that all symbols are satisfied, otherwise we get a static library.
+- allow_undefined=yes
+- ;;
+- *)
+- allow_undefined=yes
+- ;;
+- esac
+- libtool_args="$nonopt"
+- compile_command="$nonopt"
+- finalize_command="$nonopt"
+-
+- compile_rpath=
+- finalize_rpath=
+- compile_shlibpath=
+- finalize_shlibpath=
+- convenience=
+- old_convenience=
+- deplibs=
+- old_deplibs=
+- compiler_flags=
+- linker_flags=
+- dllsearchpath=
+- lib_search_path=`pwd`
+- inst_prefix_dir=
+-
+- avoid_version=no
+- dlfiles=
+- dlprefiles=
+- dlself=no
+- export_dynamic=no
+- export_symbols=
+- export_symbols_regex=
+- generated=
+- libobjs=
+- ltlibs=
+- module=no
+- no_install=no
+- objs=
+- prefer_static_libs=no
+- preload=no
+- prev=
+- prevarg=
+- release=
+- rpath=
+- xrpath=
+- perm_rpath=
+- temp_rpath=
+- thread_safe=no
+- vinfo=
+-
+- # We need to know -static, to get the right output filenames.
+- for arg
+- do
+- case $arg in
+- -all-static | -static)
+- if test "X$arg" = "X-all-static"; then
+- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+- fi
+- if test -n "$link_static_flag"; then
+- dlopen_self=$dlopen_self_static
+- fi
+- else
+- if test -z "$pic_flag" && test -n "$link_static_flag"; then
+- dlopen_self=$dlopen_self_static
+- fi
+- fi
+- build_libtool_libs=no
+- build_old_libs=yes
+- prefer_static_libs=yes
+- break
+- ;;
+- esac
+- done
+-
+- # See if our shared archives depend on static archives.
+- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+-
+- # Go through the arguments, transforming them on the way.
+- while test $# -gt 0; do
+- arg="$1"
+- shift
+- case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+- ;;
+- *) qarg=$arg ;;
+- esac
+- libtool_args="$libtool_args $qarg"
+-
+- # If the previous option needs an argument, assign it.
+- if test -n "$prev"; then
+- case $prev in
+- output)
+- compile_command="$compile_command @OUTPUT@"
+- finalize_command="$finalize_command @OUTPUT@"
+- ;;
+- esac
+-
+- case $prev in
+- dlfiles|dlprefiles)
+- if test "$preload" = no; then
+- # Add the symbol object into the linking commands.
+- compile_command="$compile_command @SYMFILE@"
+- finalize_command="$finalize_command @SYMFILE@"
+- preload=yes
+- fi
+- case $arg in
+- *.la | *.lo) ;; # We handle these cases below.
+- force)
+- if test "$dlself" = no; then
+- dlself=needless
+- export_dynamic=yes
+- fi
+- prev=
+- continue
+- ;;
+- self)
+- if test "$prev" = dlprefiles; then
+- dlself=yes
+- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+- dlself=yes
+- else
+- dlself=needless
+- export_dynamic=yes
+- fi
+- prev=
+- continue
+- ;;
+- *)
+- if test "$prev" = dlfiles; then
+- dlfiles="$dlfiles $arg"
+- else
+- dlprefiles="$dlprefiles $arg"
+- fi
+- prev=
+- continue
+- ;;
+- esac
+- ;;
+- expsyms)
+- export_symbols="$arg"
+- if test ! -f "$arg"; then
+- $echo "$modename: symbol file \`$arg' does not exist"
+- exit 1
+- fi
+- prev=
+- continue
+- ;;
+- expsyms_regex)
+- export_symbols_regex="$arg"
+- prev=
+- continue
+- ;;
+- inst_prefix)
+- inst_prefix_dir="$arg"
+- prev=
+- continue
+- ;;
+- release)
+- release="-$arg"
+- prev=
+- continue
+- ;;
+- rpath | xrpath)
+- # We need an absolute path.
+- case $arg in
+- [\\/]* | [A-Za-z]:[\\/]*) ;;
+- *)
+- $echo "$modename: only absolute run-paths are allowed" 1>&2
+- exit 1
+- ;;
+- esac
+- if test "$prev" = rpath; then
+- case "$rpath " in
+- *" $arg "*) ;;
+- *) rpath="$rpath $arg" ;;
+- esac
+- else
+- case "$xrpath " in
+- *" $arg "*) ;;
+- *) xrpath="$xrpath $arg" ;;
+- esac
+- fi
+- prev=
+- continue
+- ;;
+- xcompiler)
+- compiler_flags="$compiler_flags $qarg"
+- prev=
+- compile_command="$compile_command $qarg"
+- finalize_command="$finalize_command $qarg"
+- continue
+- ;;
+- xlinker)
+- linker_flags="$linker_flags $qarg"
+- compiler_flags="$compiler_flags $wl$qarg"
+- prev=
+- compile_command="$compile_command $wl$qarg"
+- finalize_command="$finalize_command $wl$qarg"
+- continue
+- ;;
+- *)
+- eval "$prev=\"\$arg\""
+- prev=
+- continue
+- ;;
+- esac
+- fi # test -n $prev
+-
+- prevarg="$arg"
+-
+- case $arg in
+- -all-static)
+- if test -n "$link_static_flag"; then
+- compile_command="$compile_command $link_static_flag"
+- finalize_command="$finalize_command $link_static_flag"
+- fi
+- continue
+- ;;
+-
+- -allow-undefined)
+- # FIXME: remove this flag sometime in the future.
+- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+- continue
+- ;;
+-
+- -avoid-version)
+- avoid_version=yes
+- continue
+- ;;
+-
+- -dlopen)
+- prev=dlfiles
+- continue
+- ;;
+-
+- -dlpreopen)
+- prev=dlprefiles
+- continue
+- ;;
+-
+- -export-dynamic)
+- export_dynamic=yes
+- continue
+- ;;
+-
+- -export-symbols | -export-symbols-regex)
+- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+- $echo "$modename: more than one -exported-symbols argument is not allowed"
+- exit 1
+- fi
+- if test "X$arg" = "X-export-symbols"; then
+- prev=expsyms
+- else
+- prev=expsyms_regex
+- fi
+- continue
+- ;;
+-
+- -inst-prefix-dir)
+- prev=inst_prefix
+- continue
+- ;;
+-
+- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+- # so, if we see these flags be careful not to treat them like -L
+- -L[A-Z][A-Z]*:*)
+- case $with_gcc/$host in
+- no/*-*-irix* | no/*-*-nonstopux*)
+- compile_command="$compile_command $arg"
+- finalize_command="$finalize_command $arg"
+- ;;
+- esac
+- continue
+- ;;
+-
+- -L*)
+- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+- # We need an absolute path.
+- case $dir in
+- [\\/]* | [A-Za-z]:[\\/]*) ;;
+- *)
+- absdir=`cd "$dir" && pwd`
+- if test -z "$absdir"; then
+- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+- exit 1
+- fi
+- dir="$absdir"
+- ;;
+- esac
+- case "$deplibs " in
+- *" -L$dir "*) ;;
+- *)
+- deplibs="$deplibs -L$dir"
+- lib_search_path="$lib_search_path $dir"
+- ;;
+- esac
+- case $host in
+- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+- case :$dllsearchpath: in
+- *":$dir:"*) ;;
+- *) dllsearchpath="$dllsearchpath:$dir";;
+- esac
+- ;;
+- esac
+- continue
+- ;;
+-
+- -l*)
+- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+- case $host in
+- *-*-cygwin* | *-*-pw32* | *-*-beos*)
+- # These systems don't actually have a C or math library (as such)
+- continue
+- ;;
+- *-*-mingw* | *-*-os2*)
+- # These systems don't actually have a C library (as such)
+- test "X$arg" = "X-lc" && continue
+- ;;
+- *-*-openbsd* | *-*-freebsd*)
+- # Do not include libc due to us having libc/libc_r.
+- test "X$arg" = "X-lc" && continue
+- ;;
+- esac
+- elif test "X$arg" = "X-lc_r"; then
+- case $host in
+- *-*-openbsd* | *-*-freebsd*)
+- # Do not include libc_r directly, use -pthread flag.
+- continue
+- ;;
+- esac
+- fi
+- deplibs="$deplibs $arg"
+- continue
+- ;;
+-
+- -module)
+- module=yes
+- continue
+- ;;
+-
+- -no-fast-install)
+- fast_install=no
+- continue
+- ;;
+-
+- -no-install)
+- case $host in
+- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+- # The PATH hackery in wrapper scripts is required on Windows
+- # in order for the loader to find any dlls it needs.
+- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+- fast_install=no
+- ;;
+- *) no_install=yes ;;
+- esac
+- continue
+- ;;
+-
+- -no-undefined)
+- allow_undefined=no
+- continue
+- ;;
+-
+- -o) prev=output ;;
+-
+- -release)
+- prev=release
+- continue
+- ;;
+-
+- -rpath)
+- prev=rpath
+- continue
+- ;;
+-
+- -R)
+- prev=xrpath
+- continue
+- ;;
+-
+- -R*)
+- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+- # We need an absolute path.
+- case $dir in
+- [\\/]* | [A-Za-z]:[\\/]*) ;;
+- *)
+- $echo "$modename: only absolute run-paths are allowed" 1>&2
+- exit 1
+- ;;
+- esac
+- case "$xrpath " in
+- *" $dir "*) ;;
+- *) xrpath="$xrpath $dir" ;;
+- esac
+- continue
+- ;;
+-
+- -static)
+- # The effects of -static are defined in a previous loop.
+- # We used to do the same as -all-static on platforms that
+- # didn't have a PIC flag, but the assumption that the effects
+- # would be equivalent was wrong. It would break on at least
+- # Digital Unix and AIX.
+- continue
+- ;;
+-
+- -thread-safe)
+- thread_safe=yes
+- continue
+- ;;
+-
+- -version-info)
+- prev=vinfo
+- continue
+- ;;
+-
+- -Wc,*)
+- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+- arg=
+- save_ifs="$IFS"; IFS=','
+- for flag in $args; do
+- IFS="$save_ifs"
+- case $flag in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- flag="\"$flag\""
+- ;;
+- esac
+- arg="$arg $wl$flag"
+- compiler_flags="$compiler_flags $flag"
+- done
+- IFS="$save_ifs"
+- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+- ;;
+-
+- -Wl,*)
+- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+- arg=
+- save_ifs="$IFS"; IFS=','
+- for flag in $args; do
+- IFS="$save_ifs"
+- case $flag in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- flag="\"$flag\""
+- ;;
+- esac
+- arg="$arg $wl$flag"
+- compiler_flags="$compiler_flags $wl$flag"
+- linker_flags="$linker_flags $flag"
+- done
+- IFS="$save_ifs"
+- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+- ;;
+-
+- -Xcompiler)
+- prev=xcompiler
+- continue
+- ;;
+-
+- -Xlinker)
+- prev=xlinker
+- continue
+- ;;
+-
+- -Kthread | -mthreads | -mt | -pthread | -pthreads | -threads | -qthreaded | -kthread )
+- compiler_flags="$compiler_flags $arg"
+- continue
+- ;;
+-
+- # Some other compiler flag.
+- -* | +*)
+- # Unknown arguments in both finalize_command and compile_command need
+- # to be aesthetically quoted because they are evaled later.
+- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+- case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- arg="\"$arg\""
+- ;;
+- esac
+- ;;
+-
+- *.lo | *.$objext)
+- # A library or standard object.
+- if test "$prev" = dlfiles; then
+- # This file was specified with -dlopen.
+- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+- dlfiles="$dlfiles $arg"
+- prev=
+- continue
+- else
+- # If libtool objects are unsupported, then we need to preload.
+- prev=dlprefiles
+- fi
+- fi
+-
+- if test "$prev" = dlprefiles; then
+- # Preload the old-style object.
+- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+- prev=
+- else
+- case $arg in
+- *.lo) libobjs="$libobjs $arg" ;;
+- *) objs="$objs $arg" ;;
+- esac
+- fi
+- ;;
+-
+- *.$libext)
+- # An archive.
+- deplibs="$deplibs $arg"
+- old_deplibs="$old_deplibs $arg"
+- continue
+- ;;
+-
+- *.la)
+- # A libtool-controlled library.
+-
+- if test "$prev" = dlfiles; then
+- # This library was specified with -dlopen.
+- dlfiles="$dlfiles $arg"
+- prev=
+- elif test "$prev" = dlprefiles; then
+- # The library was specified with -dlpreopen.
+- dlprefiles="$dlprefiles $arg"
+- prev=
+- else
+- deplibs="$deplibs $arg"
+- fi
+- continue
+- ;;
+-
+- # Some other compiler argument.
+- *)
+- # Unknown arguments in both finalize_command and compile_command need
+- # to be aesthetically quoted because they are evaled later.
+- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+- case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+- arg="\"$arg\""
+- ;;
+- esac
+- ;;
+- esac # arg
+-
+- # Now actually substitute the argument into the commands.
+- if test -n "$arg"; then
+- compile_command="$compile_command $arg"
+- finalize_command="$finalize_command $arg"
+- fi
+- done # argument parsing loop
+-
+- if test -n "$prev"; then
+- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+- eval arg=\"$export_dynamic_flag_spec\"
+- compile_command="$compile_command $arg"
+- finalize_command="$finalize_command $arg"
+- fi
+-
+- # calculate the name of the file, without its directory
+- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+- libobjs_save="$libobjs"
+-
+- if test -n "$shlibpath_var"; then
+- # get the directories listed in $shlibpath_var
+- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+- else
+- shlib_search_path=
+- fi
+- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+-
+- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$output_objdir" = "X$output"; then
+- output_objdir="$objdir"
+- else
+- output_objdir="$output_objdir/$objdir"
+- fi
+- # Create the object directory.
+- if test ! -d $output_objdir; then
+- $show "$mkdir $output_objdir"
+- $run $mkdir $output_objdir
+- status=$?
+- if test $status -ne 0 && test ! -d $output_objdir; then
+- exit $status
+- fi
+- fi
+-
+- # Determine the type of output
+- case $output in
+- "")
+- $echo "$modename: you must specify an output file" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- ;;
+- *.$libext) linkmode=oldlib ;;
+- *.lo | *.$objext) linkmode=obj ;;
+- *.la) linkmode=lib ;;
+- *) linkmode=prog ;; # Anything else should be a program.
+- esac
+-
+- specialdeplibs=
+- libs=
+- # Find all interdependent deplibs by searching for libraries
+- # that are linked more than once (e.g. -la -lb -la)
+- for deplib in $deplibs; do
+- if test "X$duplicate_deps" = "Xyes" ; then
+- case "$libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
+- fi
+- libs="$libs $deplib"
+- done
+- deplibs=
+- newdependency_libs=
+- newlib_search_path=
+- need_relink=no # whether we're linking any uninstalled libtool libraries
+- notinst_deplibs= # not-installed libtool libraries
+- notinst_path= # paths that contain not-installed libtool libraries
+- case $linkmode in
+- lib)
+- passes="conv link"
+- for file in $dlfiles $dlprefiles; do
+- case $file in
+- *.la) ;;
+- *)
+- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+- exit 1
+- ;;
+- esac
+- done
+- ;;
+- prog)
+- compile_deplibs=
+- finalize_deplibs=
+- alldeplibs=no
+- newdlfiles=
+- newdlprefiles=
+- passes="conv scan dlopen dlpreopen link"
+- ;;
+- *) passes="conv"
+- ;;
+- esac
+- for pass in $passes; do
+- if test "$linkmode" = prog; then
+- # Determine which files to process
+- case $pass in
+- dlopen)
+- libs="$dlfiles"
+- save_deplibs="$deplibs" # Collect dlpreopened libraries
+- deplibs=
+- ;;
+- dlpreopen) libs="$dlprefiles" ;;
+- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+- esac
+- fi
+- for deplib in $libs; do
+- lib=
+- found=no
+- case $deplib in
+- -l*)
+- if test "$linkmode" = oldlib && test "$linkmode" = obj; then
+- $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+- continue
+- fi
+- if test "$pass" = conv; then
+- deplibs="$deplib $deplibs"
+- continue
+- fi
+- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- # Search the libtool library
+- lib="$searchdir/lib${name}.la"
+- if test -f "$lib"; then
+- found=yes
+- break
+- fi
+- done
+- if test "$found" != yes; then
+- # deplib doesn't seem to be a libtool library
+- if test "$linkmode,$pass" = "prog,link"; then
+- compile_deplibs="$deplib $compile_deplibs"
+- finalize_deplibs="$deplib $finalize_deplibs"
+- else
+- deplibs="$deplib $deplibs"
+- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+- fi
+- continue
+- fi
+- ;; # -l
+- -L*)
+- case $linkmode in
+- lib)
+- deplibs="$deplib $deplibs"
+- test "$pass" = conv && continue
+- newdependency_libs="$deplib $newdependency_libs"
+- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+- ;;
+- prog)
+- if test "$pass" = conv; then
+- deplibs="$deplib $deplibs"
+- continue
+- fi
+- if test "$pass" = scan; then
+- deplibs="$deplib $deplibs"
+- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+- else
+- compile_deplibs="$deplib $compile_deplibs"
+- finalize_deplibs="$deplib $finalize_deplibs"
+- fi
+- ;;
+- *)
+- $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
+- ;;
+- esac # linkmode
+- continue
+- ;; # -L
+- -R*)
+- if test "$pass" = link; then
+- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+- # Make sure the xrpath contains only unique directories.
+- case "$xrpath " in
+- *" $dir "*) ;;
+- *) xrpath="$xrpath $dir" ;;
+- esac
+- fi
+- deplibs="$deplib $deplibs"
+- continue
+- ;;
+- *.la) lib="$deplib" ;;
+- *.$libext)
+- if test "$pass" = conv; then
+- deplibs="$deplib $deplibs"
+- continue
+- fi
+- case $linkmode in
+- lib)
+- if test "$deplibs_check_method" != pass_all; then
+- echo
+- echo "*** Warning: Trying to link with static lib archive $deplib."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have"
+- echo "*** because the file extensions .$libext of this argument makes me believe"
+- echo "*** that it is just a static archive that I should not used here."
+- else
+- echo
+- echo "*** Warning: Linking the shared library $output against the"
+- echo "*** static library $deplib is not portable!"
+- deplibs="$deplib $deplibs"
+- fi
+- continue
+- ;;
+- prog)
+- if test "$pass" != link; then
+- deplibs="$deplib $deplibs"
+- else
+- compile_deplibs="$deplib $compile_deplibs"
+- finalize_deplibs="$deplib $finalize_deplibs"
+- fi
+- continue
+- ;;
+- esac # linkmode
+- ;; # *.$libext
+- *.lo | *.$objext)
+- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+- # If there is no dlopen support or we're linking statically,
+- # we need to preload.
+- newdlprefiles="$newdlprefiles $deplib"
+- compile_deplibs="$deplib $compile_deplibs"
+- finalize_deplibs="$deplib $finalize_deplibs"
+- else
+- newdlfiles="$newdlfiles $deplib"
+- fi
+- continue
+- ;;
+- %DEPLIBS%)
+- alldeplibs=yes
+- continue
+- ;;
+- esac # case $deplib
+- if test "$found" = yes || test -f "$lib"; then :
+- else
+- $echo "$modename: cannot find the library \`$lib'" 1>&2
+- exit 1
+- fi
+-
+- # Check to see that this really is a libtool archive.
+- if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+- else
+- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
+- fi
+-
+- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+- test "X$ladir" = "X$lib" && ladir="."
+-
+- dlname=
+- dlopen=
+- dlpreopen=
+- libdir=
+- library_names=
+- old_library=
+- # If the library was installed with an old release of libtool,
+- # it will not redefine variable installed.
+- installed=yes
+-
+- # Read the .la file
+- case $lib in
+- */* | *\\*) . $lib ;;
+- *) . ./$lib ;;
+- esac
+-
+- if test "$linkmode,$pass" = "lib,link" ||
+- test "$linkmode,$pass" = "prog,scan" ||
+- { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then
+- # Add dl[pre]opened files of deplib
+- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+- fi
+-
+- if test "$pass" = conv; then
+- # Only check for convenience libraries
+- deplibs="$lib $deplibs"
+- if test -z "$libdir"; then
+- if test -z "$old_library"; then
+- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+- exit 1
+- fi
+- # It is a libtool convenience library, so add in its objects.
+- convenience="$convenience $ladir/$objdir/$old_library"
+- old_convenience="$old_convenience $ladir/$objdir/$old_library"
+- tmp_libs=
+- for deplib in $dependency_libs; do
+- deplibs="$deplib $deplibs"
+- if test "X$duplicate_deps" = "Xyes" ; then
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
+- fi
+- tmp_libs="$tmp_libs $deplib"
+- done
+- elif test "$linkmode" != prog && test "$linkmode" != lib; then
+- $echo "$modename: \`$lib' is not a convenience library" 1>&2
+- exit 1
+- fi
+- continue
+- fi # $pass = conv
+-
+- # Get the name of the library we link against.
+- linklib=
+- for l in $old_library $library_names; do
+- linklib="$l"
+- done
+- if test -z "$linklib"; then
+- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+- exit 1
+- fi
+-
+- # This library was specified with -dlopen.
+- if test "$pass" = dlopen; then
+- if test -z "$libdir"; then
+- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+- exit 1
+- fi
+- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+- # If there is no dlname, no dlopen support or we're linking
+- # statically, we need to preload.
+- dlprefiles="$dlprefiles $lib"
+- else
+- newdlfiles="$newdlfiles $lib"
+- fi
+- continue
+- fi # $pass = dlopen
+-
+- # We need an absolute path.
+- case $ladir in
+- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+- *)
+- abs_ladir=`cd "$ladir" && pwd`
+- if test -z "$abs_ladir"; then
+- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+- abs_ladir="$ladir"
+- fi
+- ;;
+- esac
+- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+-
+- # Find the relevant object directory and library name.
+- if test "X$installed" = Xyes; then
+- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+- $echo "$modename: warning: library \`$lib' was moved." 1>&2
+- dir="$ladir"
+- absdir="$abs_ladir"
+- libdir="$abs_ladir"
+- else
+- dir="$libdir"
+- absdir="$libdir"
+- fi
+- else
+- dir="$ladir/$objdir"
+- absdir="$abs_ladir/$objdir"
+- # Remove this search path later
+- notinst_path="$notinst_path $abs_ladir"
+- fi # $installed = yes
+- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+-
+- # This library was specified with -dlpreopen.
+- if test "$pass" = dlpreopen; then
+- if test -z "$libdir"; then
+- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+- exit 1
+- fi
+- # Prefer using a static library (so that no silly _DYNAMIC symbols
+- # are required to link).
+- if test -n "$old_library"; then
+- newdlprefiles="$newdlprefiles $dir/$old_library"
+- # Otherwise, use the dlname, so that lt_dlopen finds it.
+- elif test -n "$dlname"; then
+- newdlprefiles="$newdlprefiles $dir/$dlname"
+- else
+- newdlprefiles="$newdlprefiles $dir/$linklib"
+- fi
+- fi # $pass = dlpreopen
+-
+- if test -z "$libdir"; then
+- # Link the convenience library
+- if test "$linkmode" = lib; then
+- deplibs="$dir/$old_library $deplibs"
+- elif test "$linkmode,$pass" = "prog,link"; then
+- compile_deplibs="$dir/$old_library $compile_deplibs"
+- finalize_deplibs="$dir/$old_library $finalize_deplibs"
+- else
+- deplibs="$lib $deplibs"
+- fi
+- continue
+- fi
+-
+- if test "$linkmode" = prog && test "$pass" != link; then
+- newlib_search_path="$newlib_search_path $ladir"
+- deplibs="$lib $deplibs"
+-
+- linkalldeplibs=no
+- if test "$link_all_deplibs" != no || test -z "$library_names" ||
+- test "$build_libtool_libs" = no; then
+- linkalldeplibs=yes
+- fi
+-
+- tmp_libs=
+- for deplib in $dependency_libs; do
+- case $deplib in
+- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+- esac
+- # Need to link against all dependency_libs?
+- if test "$linkalldeplibs" = yes; then
+- deplibs="$deplib $deplibs"
+- else
+- # Need to hardcode shared library paths
+- # or/and link against static libraries
+- newdependency_libs="$deplib $newdependency_libs"
+- fi
+- if test "X$duplicate_deps" = "Xyes" ; then
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
+- fi
+- tmp_libs="$tmp_libs $deplib"
+- done # for deplib
+- continue
+- fi # $linkmode = prog...
+-
+- link_static=no # Whether the deplib will be linked statically
+- if test -n "$library_names" &&
+- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+- # Link against this shared library
+-
+- if test "$linkmode,$pass" = "prog,link" ||
+- { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then
+- # Hardcode the library path.
+- # Skip directories that are in the system default run-time
+- # search path.
+- case " $sys_lib_dlsearch_path " in
+- *" $absdir "*) ;;
+- *)
+- case "$compile_rpath " in
+- *" $absdir "*) ;;
+- *) compile_rpath="$compile_rpath $absdir"
+- esac
+- ;;
+- esac
+- case " $sys_lib_dlsearch_path " in
+- *" $libdir "*) ;;
+- *)
+- case "$finalize_rpath " in
+- *" $libdir "*) ;;
+- *) finalize_rpath="$finalize_rpath $libdir"
+- esac
+- ;;
+- esac
+- if test "$linkmode" = prog; then
+- # We need to hardcode the library path
+- if test -n "$shlibpath_var"; then
+- # Make sure the rpath contains only unique directories.
+- case "$temp_rpath " in
+- *" $dir "*) ;;
+- *" $absdir "*) ;;
+- *) temp_rpath="$temp_rpath $dir" ;;
+- esac
+- fi
+- fi
+- fi # $linkmode,$pass = prog,link...
+-
+- if test "$alldeplibs" = yes &&
+- { test "$deplibs_check_method" = pass_all ||
+- { test "$build_libtool_libs" = yes &&
+- test -n "$library_names"; }; }; then
+- # We only need to search for static libraries
+- continue
+- fi
+-
+- if test "$installed" = no; then
+- notinst_deplibs="$notinst_deplibs $lib"
+- need_relink=yes
+- fi
+-
+- if test -n "$old_archive_from_expsyms_cmds"; then
+- # figure out the soname
+- set dummy $library_names
+- realname="$2"
+- shift; shift
+- libname=`eval \\$echo \"$libname_spec\"`
+- # use dlname if we got it. it's perfectly good, no?
+- if test -n "$dlname"; then
+- soname="$dlname"
+- elif test -n "$soname_spec"; then
+- # bleh windows
+- case $host in
+- *cygwin*)
+- major=`expr $current - $age`
+- versuffix="-$major"
+- ;;
+- esac
+- eval soname=\"$soname_spec\"
+- else
+- soname="$realname"
+- fi
+-
+- # Make a new name for the extract_expsyms_cmds to use
+- soroot="$soname"
+- soname=`echo $soroot | ${SED} -e 's/^.*\///'`
+- newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+-
+- # If the library has no export list, then create one now
+- if test -f "$output_objdir/$soname-def"; then :
+- else
+- $show "extracting exported symbol list from \`$soname'"
+- save_ifs="$IFS"; IFS='~'
+- eval cmds=\"$extract_expsyms_cmds\"
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+- fi
+-
+- # Create $newlib
+- if test -f "$output_objdir/$newlib"; then :; else
+- $show "generating import library for \`$soname'"
+- save_ifs="$IFS"; IFS='~'
+- eval cmds=\"$old_archive_from_expsyms_cmds\"
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+- fi
+- # make sure the library variables are pointing to the new library
+- dir=$output_objdir
+- linklib=$newlib
+- fi # test -n $old_archive_from_expsyms_cmds
+-
+- if test "$linkmode" = prog || test "$mode" != relink; then
+- add_shlibpath=
+- add_dir=
+- add=
+- lib_linked=yes
+- case $hardcode_action in
+- immediate | unsupported)
+- if test "$hardcode_direct" = no; then
+- add="$dir/$linklib"
+- elif test "$hardcode_minus_L" = no; then
+- case $host in
+- *-*-sunos*) add_shlibpath="$dir" ;;
+- esac
+- add_dir="-L$dir"
+- add="-l$name"
+- elif test "$hardcode_shlibpath_var" = no; then
+- add_shlibpath="$dir"
+- add="-l$name"
+- else
+- lib_linked=no
+- fi
+- ;;
+- relink)
+- if test "$hardcode_direct" = yes; then
+- add="$dir/$linklib"
+- elif test "$hardcode_minus_L" = yes; then
+- add_dir="-L$dir"
+- add="-l$name"
+- elif test "$hardcode_shlibpath_var" = yes; then
+- add_shlibpath="$dir"
+- add="-l$name"
+- else
+- lib_linked=no
+- fi
+- ;;
+- *) lib_linked=no ;;
+- esac
+-
+- if test "$lib_linked" != yes; then
+- $echo "$modename: configuration error: unsupported hardcode properties"
+- exit 1
+- fi
+-
+- if test -n "$add_shlibpath"; then
+- case :$compile_shlibpath: in
+- *":$add_shlibpath:"*) ;;
+- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+- esac
+- fi
+- if test "$linkmode" = prog; then
+- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+- test -n "$add" && compile_deplibs="$add $compile_deplibs"
+- else
+- test -n "$add_dir" && deplibs="$add_dir $deplibs"
+- test -n "$add" && deplibs="$add $deplibs"
+- if test "$hardcode_direct" != yes && \
+- test "$hardcode_minus_L" != yes && \
+- test "$hardcode_shlibpath_var" = yes; then
+- case :$finalize_shlibpath: in
+- *":$libdir:"*) ;;
+- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+- esac
+- fi
+- fi
+- fi
+-
+- if test "$linkmode" = prog || test "$mode" = relink; then
+- add_shlibpath=
+- add_dir=
+- add=
+- # Finalize command for both is simple: just hardcode it.
+- if test "$hardcode_direct" = yes; then
+- add="$libdir/$linklib"
+- elif test "$hardcode_minus_L" = yes; then
+- add_dir="-L$libdir"
+- # Try looking first in the location we're being installed to.
+- if test -n "$inst_prefix_dir"; then
+- case "$libdir" in
+- [\/]*)
+- add_dir="-L$inst_prefix_dir$libdir $add_dir"
+- ;;
+- esac
+- fi
+- add="-l$name"
+- elif test "$hardcode_shlibpath_var" = yes; then
+- case :$finalize_shlibpath: in
+- *":$libdir:"*) ;;
+- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+- esac
+- add="-l$name"
+- else
+- # We cannot seem to hardcode it, guess we'll fake it.
+- add_dir="-L$libdir"
+- # Try looking first in the location we're being installed to.
+- if test -n "$inst_prefix_dir"; then
+- case "$libdir" in
+- [\/]*)
+- add_dir="-L$inst_prefix_dir$libdir $add_dir"
+- ;;
+- esac
+- fi
+- add="-l$name"
+- fi
+-
+- if test "$linkmode" = prog; then
+- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+- else
+- test -n "$add_dir" && deplibs="$add_dir $deplibs"
+- test -n "$add" && deplibs="$add $deplibs"
+- fi
+- fi
+- elif test "$linkmode" = prog; then
+- if test "$alldeplibs" = yes &&
+- { test "$deplibs_check_method" = pass_all ||
+- { test "$build_libtool_libs" = yes &&
+- test -n "$library_names"; }; }; then
+- # We only need to search for static libraries
+- continue
+- fi
+-
+- # Try to link the static library
+- # Here we assume that one of hardcode_direct or hardcode_minus_L
+- # is not unsupported. This is valid on all known static and
+- # shared platforms.
+- if test "$hardcode_direct" != unsupported; then
+- test -n "$old_library" && linklib="$old_library"
+- compile_deplibs="$dir/$linklib $compile_deplibs"
+- finalize_deplibs="$dir/$linklib $finalize_deplibs"
+- else
+- compile_deplibs="-l$name -L$dir $compile_deplibs"
+- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+- fi
+- elif test "$build_libtool_libs" = yes; then
+- # Not a shared library
+- if test "$deplibs_check_method" != pass_all; then
+- # We're trying link a shared library against a static one
+- # but the system doesn't support it.
+-
+- # Just print a warning and add the library to dependency_libs so
+- # that the program can be linked against the static library.
+- echo
+- echo "*** Warning: This system can not link to static lib archive $lib."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have."
+- if test "$module" = yes; then
+- echo "*** But as you try to build a module library, libtool will still create "
+- echo "*** a static module, that should work as long as the dlopening application"
+- echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+- if test -z "$global_symbol_pipe"; then
+- echo
+- echo "*** However, this would only work if libtool was able to extract symbol"
+- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+- echo "*** not find such a program. So, this module is probably useless."
+- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+- fi
+- if test "$build_old_libs" = no; then
+- build_libtool_libs=module
+- build_old_libs=yes
+- else
+- build_libtool_libs=no
+- fi
+- fi
+- else
+- convenience="$convenience $dir/$old_library"
+- old_convenience="$old_convenience $dir/$old_library"
+- deplibs="$dir/$old_library $deplibs"
+- link_static=yes
+- fi
+- fi # link shared/static library?
+-
+- if test "$linkmode" = lib; then
+- if test -n "$dependency_libs" &&
+- { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
+- test "$link_static" = yes; }; then
+- # Extract -R from dependency_libs
+- temp_deplibs=
+- for libdir in $dependency_libs; do
+- case $libdir in
+- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+- case " $xrpath " in
+- *" $temp_xrpath "*) ;;
+- *) xrpath="$xrpath $temp_xrpath";;
+- esac;;
+- *) temp_deplibs="$temp_deplibs $libdir";;
+- esac
+- done
+- dependency_libs="$temp_deplibs"
+- fi
+-
+- newlib_search_path="$newlib_search_path $absdir"
+- # Link against this library
+- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+- # ... and its dependency_libs
+- tmp_libs=
+- for deplib in $dependency_libs; do
+- newdependency_libs="$deplib $newdependency_libs"
+- if test "X$duplicate_deps" = "Xyes" ; then
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
+- fi
+- tmp_libs="$tmp_libs $deplib"
+- done
+-
+- if test "$link_all_deplibs" != no; then
+- # Add the search paths of all dependency libraries
+- for deplib in $dependency_libs; do
+- case $deplib in
+- -L*) path="$deplib" ;;
+- *.la)
+- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+- test "X$dir" = "X$deplib" && dir="."
+- # We need an absolute path.
+- case $dir in
+- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+- *)
+- absdir=`cd "$dir" && pwd`
+- if test -z "$absdir"; then
+- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+- absdir="$dir"
+- fi
+- ;;
+- esac
+- if grep "^installed=no" $deplib > /dev/null; then
+- path="-L$absdir/$objdir"
+- else
+- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+- if test -z "$libdir"; then
+- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+- exit 1
+- fi
+- if test "$absdir" != "$libdir"; then
+- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+- fi
+- path="-L$absdir"
+- fi
+- ;;
+- *) continue ;;
+- esac
+- case " $deplibs " in
+- *" $path "*) ;;
+- *) deplibs="$deplibs $path" ;;
+- esac
+- done
+- fi # link_all_deplibs != no
+- fi # linkmode = lib
+- done # for deplib in $libs
+- if test "$pass" = dlpreopen; then
+- # Link the dlpreopened libraries before other libraries
+- for deplib in $save_deplibs; do
+- deplibs="$deplib $deplibs"
+- done
+- fi
+- if test "$pass" != dlopen; then
+- test "$pass" != scan && dependency_libs="$newdependency_libs"
+- if test "$pass" != conv; then
+- # Make sure lib_search_path contains only unique directories.
+- lib_search_path=
+- for dir in $newlib_search_path; do
+- case "$lib_search_path " in
+- *" $dir "*) ;;
+- *) lib_search_path="$lib_search_path $dir" ;;
+- esac
+- done
+- newlib_search_path=
+- fi
+-
+- if test "$linkmode,$pass" != "prog,link"; then
+- vars="deplibs"
+- else
+- vars="compile_deplibs finalize_deplibs"
+- fi
+- for var in $vars dependency_libs; do
+- # Add libraries to $var in reverse order
+- eval tmp_libs=\"\$$var\"
+- new_libs=
+- for deplib in $tmp_libs; do
+- case $deplib in
+- -L*) new_libs="$deplib $new_libs" ;;
+- *)
+- case " $specialdeplibs " in
+- *" $deplib "*) new_libs="$deplib $new_libs" ;;
+- *)
+- case " $new_libs " in
+- *" $deplib "*) ;;
+- *) new_libs="$deplib $new_libs" ;;
+- esac
+- ;;
+- esac
+- ;;
+- esac
+- done
+- tmp_libs=
+- for deplib in $new_libs; do
+- case $deplib in
+- -L*)
+- case " $tmp_libs " in
+- *" $deplib "*) ;;
+- *) tmp_libs="$tmp_libs $deplib" ;;
+- esac
+- ;;
+- *) tmp_libs="$tmp_libs $deplib" ;;
+- esac
+- done
+- eval $var=\"$tmp_libs\"
+- done # for var
+- fi
+- if test "$pass" = "conv" &&
+- { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
+- libs="$deplibs" # reset libs
+- deplibs=
+- fi
+- done # for pass
+- if test "$linkmode" = prog; then
+- dlfiles="$newdlfiles"
+- dlprefiles="$newdlprefiles"
+- fi
+-
+- case $linkmode in
+- oldlib)
+- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+- fi
+-
+- if test -n "$rpath"; then
+- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+- fi
+-
+- if test -n "$xrpath"; then
+- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+- fi
+-
+- if test -n "$vinfo"; then
+- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+- fi
+-
+- if test -n "$release"; then
+- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+- fi
+-
+- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+- fi
+-
+- # Now set the variables for building old libraries.
+- build_libtool_libs=no
+- oldlibs="$output"
+- objs="$objs$old_deplibs"
+- ;;
+-
+- lib)
+- # Make sure we only generate libraries of the form `libNAME.la'.
+- case $outputname in
+- lib*)
+- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+- eval libname=\"$libname_spec\"
+- ;;
+- *)
+- if test "$module" = no; then
+- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+- if test "$need_lib_prefix" != no; then
+- # Add the "lib" prefix for modules if required
+- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+- eval libname=\"$libname_spec\"
+- else
+- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+- fi
+- ;;
+- esac
+-
+- if test -n "$objs"; then
+- if test "$deplibs_check_method" != pass_all; then
+- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+- exit 1
+- else
+- echo
+- echo "*** Warning: Linking the shared library $output against the non-libtool"
+- echo "*** objects $objs is not portable!"
+- libobjs="$libobjs $objs"
+- fi
+- fi
+-
+- if test "$dlself" != no; then
+- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+- fi
+-
+- set dummy $rpath
+- if test $# -gt 2; then
+- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+- fi
+- install_libdir="$2"
+-
+- oldlibs=
+- if test -z "$rpath"; then
+- if test "$build_libtool_libs" = yes; then
+- # Building a libtool convenience library.
+- libext=al
+- oldlibs="$output_objdir/$libname.$libext $oldlibs"
+- build_libtool_libs=convenience
+- build_old_libs=yes
+- fi
+-
+- if test -n "$vinfo"; then
+- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+- fi
+-
+- if test -n "$release"; then
+- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+- fi
+- else
+-
+- # Parse the version information argument.
+- save_ifs="$IFS"; IFS=':'
+- set dummy $vinfo 0 0 0
+- IFS="$save_ifs"
+-
+- if test -n "$8"; then
+- $echo "$modename: too many parameters to \`-version-info'" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- current="$2"
+- revision="$3"
+- age="$4"
+-
+- # Check that each of the things are valid numbers.
+- case $current in
+- [0-9]*) ;;
+- *)
+- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
+- ;;
+- esac
+-
+- case $revision in
+- [0-9]*) ;;
+- *)
+- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
+- ;;
+- esac
+-
+- case $age in
+- [0-9]*) ;;
+- *)
+- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
+- ;;
+- esac
+-
+- if test $age -gt $current; then
+- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
+- fi
+-
+- # Calculate the version variables.
+- major=
+- versuffix=
+- verstring=
+- case $version_type in
+- none) ;;
+-
+- darwin)
+- # Like Linux, but with the current version available in
+- # verstring for coding it into the library header
+- major=.`expr $current - $age`
+- versuffix="$major.$age.$revision"
+- # Darwin ld doesn't like 0 for these options...
+- minor_current=`expr $current + 1`
+- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+- ;;
+-
+- freebsd-aout)
+- major=".$current"
+- versuffix=".$current.$revision";
+- ;;
+-
+- freebsd-elf)
+- major=".$current"
+- versuffix=".$current";
+- ;;
+-
+- irix | nonstopux)
+- major=`expr $current - $age + 1`
+-
+- case $version_type in
+- nonstopux) verstring_prefix=nonstopux ;;
+- *) verstring_prefix=sgi ;;
+- esac
+- verstring="$verstring_prefix$major.$revision"
+-
+- # Add in all the interfaces that we are compatible with.
+- loop=$revision
+- while test $loop != 0; do
+- iface=`expr $revision - $loop`
+- loop=`expr $loop - 1`
+- verstring="$verstring_prefix$major.$iface:$verstring"
+- done
+-
+- # Before this point, $major must not contain `.'.
+- major=.$major
+- versuffix="$major.$revision"
+- ;;
+-
+- linux)
+- major=.`expr $current - $age`
+- versuffix="$major.$age.$revision"
+- ;;
+-
+- osf)
+- major=.`expr $current - $age`
+- versuffix=".$current.$age.$revision"
+- verstring="$current.$age.$revision"
+-
+- # Add in all the interfaces that we are compatible with.
+- loop=$age
+- while test $loop != 0; do
+- iface=`expr $current - $loop`
+- loop=`expr $loop - 1`
+- verstring="$verstring:${iface}.0"
+- done
+-
+- # Make executables depend on our current version.
+- verstring="$verstring:${current}.0"
+- ;;
+-
+- sunos)
+- major=".$current"
+- versuffix=".$current.$revision"
+- ;;
+-
+- windows)
+- # Use '-' rather than '.', since we only want one
+- # extension on DOS 8.3 filesystems.
+- major=`expr $current - $age`
+- versuffix="-$major"
+- ;;
+-
+- *)
+- $echo "$modename: unknown library version type \`$version_type'" 1>&2
+- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+- exit 1
+- ;;
+- esac
+-
+- # Clear the version info if we defaulted, and they specified a release.
+- if test -z "$vinfo" && test -n "$release"; then
+- major=
+- verstring="0.0"
+- case $version_type in
+- darwin)
+- # we can't check for "0.0" in archive_cmds due to quoting
+- # problems, so we reset it completely
+- verstring=""
+- ;;
+- *)
+- verstring="0.0"
+- ;;
+- esac
+- if test "$need_version" = no; then
+- versuffix=
+- else
+- versuffix=".0.0"
+- fi
+- fi
+-
+- # Remove version info from name if versioning should be avoided
+- if test "$avoid_version" = yes && test "$need_version" = no; then
+- major=
+- versuffix=
+- verstring=""
+- fi
+-
+- # Check to see if the archive will have undefined symbols.
+- if test "$allow_undefined" = yes; then
+- if test "$allow_undefined_flag" = unsupported; then
+- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+- build_libtool_libs=no
+- build_old_libs=yes
+- fi
+- else
+- # Don't allow undefined symbols.
+- allow_undefined_flag="$no_undefined_flag"
+- fi
+- fi
+-
+- if test "$mode" != relink; then
+- # Remove our outputs.
+- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+- fi
+-
+- # Now set the variables for building old libraries.
+- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+- oldlibs="$oldlibs $output_objdir/$libname.$libext"
+-
+- # Transform .lo files to .o files.
+- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+- fi
+-
+- # Eliminate all temporary directories.
+- for path in $notinst_path; do
+- lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
+- deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
+- dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+- done
+-
+- if test -n "$xrpath"; then
+- # If the user specified any rpath flags, then add them.
+- temp_xrpath=
+- for libdir in $xrpath; do
+- temp_xrpath="$temp_xrpath -R$libdir"
+- case "$finalize_rpath " in
+- *" $libdir "*) ;;
+- *) finalize_rpath="$finalize_rpath $libdir" ;;
+- esac
+- done
+- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+- dependency_libs="$temp_xrpath $dependency_libs"
+- fi
+- fi
+-
+- # Make sure dlfiles contains only unique files that won't be dlpreopened
+- old_dlfiles="$dlfiles"
+- dlfiles=
+- for lib in $old_dlfiles; do
+- case " $dlprefiles $dlfiles " in
+- *" $lib "*) ;;
+- *) dlfiles="$dlfiles $lib" ;;
+- esac
+- done
+-
+- # Make sure dlprefiles contains only unique files
+- old_dlprefiles="$dlprefiles"
+- dlprefiles=
+- for lib in $old_dlprefiles; do
+- case "$dlprefiles " in
+- *" $lib "*) ;;
+- *) dlprefiles="$dlprefiles $lib" ;;
+- esac
+- done
+-
+- if test "$build_libtool_libs" = yes; then
+- if test -n "$rpath"; then
+- case $host in
+- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+- # these systems don't actually have a c library (as such)!
+- ;;
+- *-*-rhapsody* | *-*-darwin1.[012])
+- # Rhapsody C library is in the System framework
+- deplibs="$deplibs -framework System"
+- ;;
+- *-*-netbsd*)
+- # Don't link with libc until the a.out ld.so is fixed.
+- ;;
+- *-*-openbsd* | *-*-freebsd*)
+- # Do not include libc due to us having libc/libc_r.
+- ;;
+- *)
+- # Add libc to deplibs on all other systems if necessary.
+- if test "$build_libtool_need_lc" = "yes"; then
+- deplibs="$deplibs -lc"
+- fi
+- ;;
+- esac
+- fi
+-
+- # Transform deplibs into only deplibs that can be linked in shared.
+- name_save=$name
+- libname_save=$libname
+- release_save=$release
+- versuffix_save=$versuffix
+- major_save=$major
+- # I'm not sure if I'm treating the release correctly. I think
+- # release should show up in the -l (ie -lgmp5) so we don't want to
+- # add it in twice. Is that correct?
+- release=""
+- versuffix=""
+- major=""
+- newdeplibs=
+- droppeddeps=no
+- case $deplibs_check_method in
+- pass_all)
+- # Don't check for shared/static. Everything works.
+- # This might be a little naive. We might want to check
+- # whether the library exists or not. But this is on
+- # osf3 & osf4 and I'm not really sure... Just
+- # implementing what was already the behaviour.
+- newdeplibs=$deplibs
+- ;;
+- test_compile)
+- # This code stresses the "libraries are programs" paradigm to its
+- # limits. Maybe even breaks it. We compile a program, linking it
+- # against the deplibs as a proxy for the library. Then we can check
+- # whether they linked in statically or dynamically with ldd.
+- $rm conftest.c
+- cat > conftest.c <<EOF
+- int main() { return 0; }
+-EOF
+- $rm conftest
+- $CC -o conftest conftest.c $deplibs
+- if test $? -eq 0 ; then
+- ldd_output=`ldd conftest`
+- for i in $deplibs; do
+- name="`expr $i : '-l\(.*\)'`"
+- # If $name is empty we are operating on a -L argument.
+- if test -n "$name" && test "$name" != "0"; then
+- libname=`eval \\$echo \"$libname_spec\"`
+- deplib_matches=`eval \\$echo \"$library_names_spec\"`
+- set dummy $deplib_matches
+- deplib_match=$2
+- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+- newdeplibs="$newdeplibs $i"
+- else
+- droppeddeps=yes
+- echo
+- echo "*** Warning: dynamic linker does not accept needed library $i."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which I believe you do not have"
+- echo "*** because a test_compile did reveal that the linker did not use it for"
+- echo "*** its dynamic dependency list that programs get resolved with at runtime."
+- fi
+- else
+- newdeplibs="$newdeplibs $i"
+- fi
+- done
+- else
+- # Error occured in the first compile. Let's try to salvage
+- # the situation: Compile a separate program for each library.
+- for i in $deplibs; do
+- name="`expr $i : '-l\(.*\)'`"
+- # If $name is empty we are operating on a -L argument.
+- if test -n "$name" && test "$name" != "0"; then
+- $rm conftest
+- $CC -o conftest conftest.c $i
+- # Did it work?
+- if test $? -eq 0 ; then
+- ldd_output=`ldd conftest`
+- libname=`eval \\$echo \"$libname_spec\"`
+- deplib_matches=`eval \\$echo \"$library_names_spec\"`
+- set dummy $deplib_matches
+- deplib_match=$2
+- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+- newdeplibs="$newdeplibs $i"
+- else
+- droppeddeps=yes
+- echo
+- echo "*** Warning: dynamic linker does not accept needed library $i."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have"
+- echo "*** because a test_compile did reveal that the linker did not use this one"
+- echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+- fi
+- else
+- droppeddeps=yes
+- echo
+- echo "*** Warning! Library $i is needed by this library but I was not able to"
+- echo "*** make it link in! You will probably need to install it or some"
+- echo "*** library that it depends on before this library will be fully"
+- echo "*** functional. Installing it before continuing would be even better."
+- fi
+- else
+- newdeplibs="$newdeplibs $i"
+- fi
+- done
+- fi
+- ;;
+- file_magic*)
+- set dummy $deplibs_check_method
+- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+- for a_deplib in $deplibs; do
+- name="`expr $a_deplib : '-l\(.*\)'`"
+- # If $name is empty we are operating on a -L argument.
+- if test -n "$name" && test "$name" != "0"; then
+- libname=`eval \\$echo \"$libname_spec\"`
+- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+- for potent_lib in $potential_libs; do
+- # Follow soft links.
+- if ls -lLd "$potent_lib" 2>/dev/null \
+- | grep " -> " >/dev/null; then
+- continue
+- fi
+- # The statement above tries to avoid entering an
+- # endless loop below, in case of cyclic links.
+- # We might still enter an endless loop, since a link
+- # loop can be closed while we follow links,
+- # but so what?
+- potlib="$potent_lib"
+- while test -h "$potlib" 2>/dev/null; do
+- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+- case $potliblink in
+- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+- esac
+- done
+- # It is ok to link against an archive when
+- # building a shared library.
+- if $AR -t $potlib > /dev/null 2>&1; then
+- newdeplibs="$newdeplibs $a_deplib"
+- a_deplib=""
+- break 2
+- fi
+- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+- | ${SED} 10q \
+- | egrep "$file_magic_regex" > /dev/null; then
+- newdeplibs="$newdeplibs $a_deplib"
+- a_deplib=""
+- break 2
+- fi
+- done
+- done
+- if test -n "$a_deplib" ; then
+- droppeddeps=yes
+- echo
+- echo "*** Warning: linker path does not have real file for library $a_deplib."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have"
+- echo "*** because I did check the linker path looking for a file starting"
+- if test -z "$potlib" ; then
+- echo "*** with $libname but no candidates were found. (...for file magic test)"
+- else
+- echo "*** with $libname and none of the candidates passed a file format test"
+- echo "*** using a file magic. Last file checked: $potlib"
+- fi
+- fi
+- else
+- # Add a -L argument.
+- newdeplibs="$newdeplibs $a_deplib"
+- fi
+- done # Gone through all deplibs.
+- ;;
+- match_pattern*)
+- set dummy $deplibs_check_method
+- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+- for a_deplib in $deplibs; do
+- name="`expr $a_deplib : '-l\(.*\)'`"
+- # If $name is empty we are operating on a -L argument.
+- if test -n "$name" && test "$name" != "0"; then
+- libname=`eval \\$echo \"$libname_spec\"`
+- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+- for potent_lib in $potential_libs; do
+- potlib="$potent_lib" # see symlink-check below in file_magic test
+- if eval echo \"$potent_lib\" 2>/dev/null \
+- | ${SED} 10q \
+- | egrep "$match_pattern_regex" > /dev/null; then
+- newdeplibs="$newdeplibs $a_deplib"
+- a_deplib=""
+- break 2
+- fi
+- done
+- done
+- if test -n "$a_deplib" ; then
+- droppeddeps=yes
+- echo
+- echo "*** Warning: linker path does not have real file for library $a_deplib."
+- echo "*** I have the capability to make that library automatically link in when"
+- echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have"
+- echo "*** because I did check the linker path looking for a file starting"
+- if test -z "$potlib" ; then
+- echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+- else
+- echo "*** with $libname and none of the candidates passed a file format test"
+- echo "*** using a regex pattern. Last file checked: $potlib"
+- fi
+- fi
+- else
+- # Add a -L argument.
+- newdeplibs="$newdeplibs $a_deplib"
+- fi
+- done # Gone through all deplibs.
+- ;;
+- none | unknown | *)
+- newdeplibs=""
+- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
+- grep . >/dev/null; then
+- echo
+- if test "X$deplibs_check_method" = "Xnone"; then
+- echo "*** Warning: inter-library dependencies are not supported in this platform."
+- else
+- echo "*** Warning: inter-library dependencies are not known to be supported."
+- fi
+- echo "*** All declared inter-library dependencies are being dropped."
+- droppeddeps=yes
+- fi
+- ;;
+- esac
+- versuffix=$versuffix_save
+- major=$major_save
+- release=$release_save
+- libname=$libname_save
+- name=$name_save
+-
+- case $host in
+- *-*-rhapsody* | *-*-darwin1.[012])
+- # On Rhapsody replace the C library is the System framework
+- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+- ;;
+- esac
+-
+- if test "$droppeddeps" = yes; then
+- if test "$module" = yes; then
+- echo
+- echo "*** Warning: libtool could not satisfy all declared inter-library"
+- echo "*** dependencies of module $libname. Therefore, libtool will create"
+- echo "*** a static module, that should work as long as the dlopening"
+- echo "*** application is linked with the -dlopen flag."
+- if test -z "$global_symbol_pipe"; then
+- echo
+- echo "*** However, this would only work if libtool was able to extract symbol"
+- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+- echo "*** not find such a program. So, this module is probably useless."
+- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+- fi
+- if test "$build_old_libs" = no; then
+- oldlibs="$output_objdir/$libname.$libext"
+- build_libtool_libs=module
+- build_old_libs=yes
+- else
+- build_libtool_libs=no
+- fi
+- else
+- echo "*** The inter-library dependencies that have been dropped here will be"
+- echo "*** automatically added whenever a program is linked with this library"
+- echo "*** or is declared to -dlopen it."
+-
+- if test "$allow_undefined" = no; then
+- echo
+- echo "*** Since this library must not contain undefined symbols,"
+- echo "*** because either the platform does not support them or"
+- echo "*** it was explicitly requested with -no-undefined,"
+- echo "*** libtool will only create a static version of it."
+- if test "$build_old_libs" = no; then
+- oldlibs="$output_objdir/$libname.$libext"
+- build_libtool_libs=module
+- build_old_libs=yes
+- else
+- build_libtool_libs=no
+- fi
+- fi
+- fi
+- fi
+- # Done checking deplibs!
+- deplibs=$newdeplibs
+- fi
+-
+- # All the library-specific variables (install_libdir is set above).
+- library_names=
+- old_library=
+- dlname=
+-
+- # Test again, we may have decided not to build it any more
+- if test "$build_libtool_libs" = yes; then
+- if test "$hardcode_into_libs" = yes; then
+- # Hardcode the library paths
+- hardcode_libdirs=
+- dep_rpath=
+- rpath="$finalize_rpath"
+- test "$mode" != relink && rpath="$compile_rpath$rpath"
+- for libdir in $rpath; do
+- if test -n "$hardcode_libdir_flag_spec"; then
+- if test -n "$hardcode_libdir_separator"; then
+- if test -z "$hardcode_libdirs"; then
+- hardcode_libdirs="$libdir"
+- else
+- # Just accumulate the unique libdirs.
+- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+- ;;
+- *)
+- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+- ;;
+- esac
+- fi
+- else
+- eval flag=\"$hardcode_libdir_flag_spec\"
+- dep_rpath="$dep_rpath $flag"
+- fi
+- elif test -n "$runpath_var"; then
+- case "$perm_rpath " in
+- *" $libdir "*) ;;
+- *) perm_rpath="$perm_rpath $libdir" ;;
+- esac
+- fi
+- done
+- # Substitute the hardcoded libdirs into the rpath.
+- if test -n "$hardcode_libdir_separator" &&
+- test -n "$hardcode_libdirs"; then
+- libdir="$hardcode_libdirs"
+- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+- fi
+- if test -n "$runpath_var" && test -n "$perm_rpath"; then
+- # We should set the runpath_var.
+- rpath=
+- for dir in $perm_rpath; do
+- rpath="$rpath$dir:"
+- done
+- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+- fi
+- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+- fi
+-
+- shlibpath="$finalize_shlibpath"
+- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+- if test -n "$shlibpath"; then
+- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+- fi
+-
+- # Get the real and link names of the library.
+- eval library_names=\"$library_names_spec\"
+- set dummy $library_names
+- realname="$2"
+- shift; shift
+-
+- if test -n "$soname_spec"; then
+- eval soname=\"$soname_spec\"
+- else
+- soname="$realname"
+- fi
+- test -z "$dlname" && dlname=$soname
+-
+- lib="$output_objdir/$realname"
+- for link
+- do
+- linknames="$linknames $link"
+- done
+-
+- # Ensure that we have .o objects for linkers which dislike .lo
+- # (e.g. aix) in case we are running --disable-static
+- for obj in $libobjs; do
+- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$xdir" = "X$obj"; then
+- xdir="."
+- else
+- xdir="$xdir"
+- fi
+- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+- if test ! -f $xdir/$oldobj; then
+- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+- fi
+- done
+-
+- # Use standard objects if they are pic
+- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-
+- # Prepare the list of exported symbols
+- if test -z "$export_symbols"; then
+- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+- $show "generating symbol list for \`$libname.la'"
+- export_symbols="$output_objdir/$libname.exp"
+- $run $rm $export_symbols
+- eval cmds=\"$export_symbols_cmds\"
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+- if test -n "$export_symbols_regex"; then
+- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+- $run eval '$mv "${export_symbols}T" "$export_symbols"'
+- fi
+- fi
+- fi
+-
+- if test -n "$export_symbols" && test -n "$include_expsyms"; then
+- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+- fi
+-
+- if test -n "$convenience"; then
+- if test -n "$whole_archive_flag_spec"; then
+- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+- else
+- gentop="$output_objdir/${outputname}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "mkdir $gentop"
+- $run mkdir "$gentop"
+- status=$?
+- if test $status -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
+- generated="$generated $gentop"
+-
+- for xlib in $convenience; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "mkdir $xdir"
+- $run mkdir "$xdir"
+- status=$?
+- if test $status -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+-
+- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+- done
+- fi
+- fi
+-
+- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+- eval flag=\"$thread_safe_flag_spec\"
+- linker_flags="$linker_flags $flag"
+- fi
+-
+- # Make a backup of the uninstalled library when relinking
+- if test "$mode" = relink; then
+- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+- fi
+-
+- # At the last stage, always prepend inst_prefix_dir in front of any
+- # other library paths
+- if test -n "$inst_prefix_dir"; then
+- tmp_deplibs=
+- for arg in $deplibs; do
+- if echo "$arg" | grep -- "^-L$inst_prefix_dir" > /dev/null; then
+- tmp_deplibs="$arg $tmp_deplibs"
+- else
+- tmp_deplibs="$tmp_deplibs $arg"
+- fi
+- done
+- deplibs="$tmp_deplibs"
+- fi
+-
+- # Do each of the archive commands.
+- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+- eval cmds=\"$archive_expsym_cmds\"
+- else
+- save_deplibs="$deplibs"
+- for conv in $convenience; do
+- tmp_deplibs=
+- for test_deplib in $deplibs; do
+- if test "$test_deplib" != "$conv"; then
+- tmp_deplibs="$tmp_deplibs $test_deplib"
+- fi
+- done
+- deplibs="$tmp_deplibs"
+- done
+- eval cmds=\"$archive_cmds\"
+- deplibs="$save_deplibs"
+- fi
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+-
+- # Restore the uninstalled library and exit
+- if test "$mode" = relink; then
+- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+- exit 0
+- fi
+-
+- # Create links to the real library.
+- for linkname in $linknames; do
+- if test "$realname" != "$linkname"; then
+- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+- fi
+- done
+-
+- # If -module or -export-dynamic was specified, set the dlname.
+- if test "$module" = yes || test "$export_dynamic" = yes; then
+- # On all known operating systems, these are identical.
+- dlname="$soname"
+- fi
+- fi
+- ;;
+-
+- obj)
+- if test -n "$deplibs"; then
+- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+- fi
+-
+- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+- fi
+-
+- if test -n "$rpath"; then
+- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+- fi
+-
+- if test -n "$xrpath"; then
+- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+- fi
+-
+- if test -n "$vinfo"; then
+- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+- fi
+-
+- if test -n "$release"; then
+- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+- fi
+-
+- case $output in
+- *.lo)
+- if test -n "$objs$old_deplibs"; then
+- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+- exit 1
+- fi
+- libobj="$output"
+- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+- ;;
+- *)
+- libobj=
+- obj="$output"
+- ;;
+- esac
+-
+- # Delete the old objects.
+- $run $rm $obj $libobj
+-
+- # Objects from convenience libraries. This assumes
+- # single-version convenience libraries. Whenever we create
+- # different ones for PIC/non-PIC, this we'll have to duplicate
+- # the extraction.
+- reload_conv_objs=
+- gentop=
+- # reload_cmds runs $LD directly, so let us get rid of
+- # -Wl from whole_archive_flag_spec
+- wl=
+-
+- if test -n "$convenience"; then
+- if test -n "$whole_archive_flag_spec"; then
+- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+- else
+- gentop="$output_objdir/${obj}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "mkdir $gentop"
+- $run mkdir "$gentop"
+- status=$?
+- if test $status -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
+- generated="$generated $gentop"
+-
+- for xlib in $convenience; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "mkdir $xdir"
+- $run mkdir "$xdir"
+- status=$?
+- if test $status -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+-
+- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+- done
+- fi
+- fi
+-
+- # Create the old-style object.
+- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+-
+- output="$obj"
+- eval cmds=\"$reload_cmds\"
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+-
+- # Exit if we aren't doing a library object file.
+- if test -z "$libobj"; then
+- if test -n "$gentop"; then
+- $show "${rm}r $gentop"
+- $run ${rm}r $gentop
+- fi
+-
+- exit 0
+- fi
+-
+- if test "$build_libtool_libs" != yes; then
+- if test -n "$gentop"; then
+- $show "${rm}r $gentop"
+- $run ${rm}r $gentop
+- fi
+-
+- # Create an invalid libtool object if no PIC, so that we don't
+- # accidentally link it into a program.
+- $show "echo timestamp > $libobj"
+- $run eval "echo timestamp > $libobj" || exit $?
+- exit 0
+- fi
+-
+- if test -n "$pic_flag" || test "$pic_mode" != default; then
+- # Only do commands if we really have different PIC objects.
+- reload_objs="$libobjs $reload_conv_objs"
+- output="$libobj"
+- eval cmds=\"$reload_cmds\"
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+- else
+- # Just create a symlink.
+- $show $rm $libobj
+- $run $rm $libobj
+- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$xdir" = "X$libobj"; then
+- xdir="."
+- else
+- xdir="$xdir"
+- fi
+- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+- $show "(cd $xdir && $LN_S $oldobj $baseobj)"
+- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+- fi
+-
+- if test -n "$gentop"; then
+- $show "${rm}r $gentop"
+- $run ${rm}r $gentop
+- fi
+-
+- exit 0
+- ;;
+-
+- prog)
+- case $host in
+- *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+- esac
+- if test -n "$vinfo"; then
+- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+- fi
+-
+- if test -n "$release"; then
+- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+- fi
+-
+- if test "$preload" = yes; then
+- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+- test "$dlopen_self_static" = unknown; then
+- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+- fi
+- fi
+-
+- case $host in
+- *-*-rhapsody* | *-*-darwin1.[012])
+- # On Rhapsody replace the C library is the System framework
+- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+- case $host in
+- *darwin*)
+- # Don't allow lazy linking, it breaks C++ global constructors
+- compile_command="$compile_command ${wl}-bind_at_load"
+- finalize_command="$finalize_command ${wl}-bind_at_load"
+- ;;
+- esac
+- ;;
+- esac
+-
+- compile_command="$compile_command $compile_deplibs"
+- finalize_command="$finalize_command $finalize_deplibs"
+-
+- if test -n "$rpath$xrpath"; then
+- # If the user specified any rpath flags, then add them.
+- for libdir in $rpath $xrpath; do
+- # This is the magic to use -rpath.
+- case "$finalize_rpath " in
+- *" $libdir "*) ;;
+- *) finalize_rpath="$finalize_rpath $libdir" ;;
+- esac
+- done
+- fi
+-
+- # Now hardcode the library paths
+- rpath=
+- hardcode_libdirs=
+- for libdir in $compile_rpath $finalize_rpath; do
+- if test -n "$hardcode_libdir_flag_spec"; then
+- if test -n "$hardcode_libdir_separator"; then
+- if test -z "$hardcode_libdirs"; then
+- hardcode_libdirs="$libdir"
+- else
+- # Just accumulate the unique libdirs.
+- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+- ;;
+- *)
+- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+- ;;
+- esac
+- fi
+- else
+- eval flag=\"$hardcode_libdir_flag_spec\"
+- rpath="$rpath $flag"
+- fi
+- elif test -n "$runpath_var"; then
+- case "$perm_rpath " in
+- *" $libdir "*) ;;
+- *) perm_rpath="$perm_rpath $libdir" ;;
+- esac
+- fi
+- case $host in
+- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+- case :$dllsearchpath: in
+- *":$libdir:"*) ;;
+- *) dllsearchpath="$dllsearchpath:$libdir";;
+- esac
+- ;;
+- esac
+- done
+- # Substitute the hardcoded libdirs into the rpath.
+- if test -n "$hardcode_libdir_separator" &&
+- test -n "$hardcode_libdirs"; then
+- libdir="$hardcode_libdirs"
+- eval rpath=\" $hardcode_libdir_flag_spec\"
+- fi
+- compile_rpath="$rpath"
+-
+- rpath=
+- hardcode_libdirs=
+- for libdir in $finalize_rpath; do
+- if test -n "$hardcode_libdir_flag_spec"; then
+- if test -n "$hardcode_libdir_separator"; then
+- if test -z "$hardcode_libdirs"; then
+- hardcode_libdirs="$libdir"
+- else
+- # Just accumulate the unique libdirs.
+- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+- ;;
+- *)
+- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+- ;;
+- esac
+- fi
+- else
+- eval flag=\"$hardcode_libdir_flag_spec\"
+- rpath="$rpath $flag"
+- fi
+- elif test -n "$runpath_var"; then
+- case "$finalize_perm_rpath " in
+- *" $libdir "*) ;;
+- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+- esac
+- fi
+- done
+- # Substitute the hardcoded libdirs into the rpath.
+- if test -n "$hardcode_libdir_separator" &&
+- test -n "$hardcode_libdirs"; then
+- libdir="$hardcode_libdirs"
+- eval rpath=\" $hardcode_libdir_flag_spec\"
+- fi
+- finalize_rpath="$rpath"
+-
+- if test -n "$libobjs" && test "$build_old_libs" = yes; then
+- # Transform all the library objects into standard objects.
+- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+- fi
+-
+- dlsyms=
+- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+- if test -n "$NM" && test -n "$global_symbol_pipe"; then
+- dlsyms="${outputname}S.c"
+- else
+- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+- fi
+- fi
+-
+- if test -n "$dlsyms"; then
+- case $dlsyms in
+- "") ;;
+- *.c)
+- # Discover the nlist of each of the dlfiles.
+- nlist="$output_objdir/${outputname}.nm"
+-
+- $show "$rm $nlist ${nlist}S ${nlist}T"
+- $run $rm "$nlist" "${nlist}S" "${nlist}T"
+-
+- # Parse the name list into a source file.
+- $show "creating $output_objdir/$dlsyms"
+-
+- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+-
+-#ifdef __cplusplus
+-extern \"C\" {
+-#endif
+-
+-/* Prevent the only kind of declaration conflicts we can make. */
+-#define lt_preloaded_symbols some_other_symbol
+-
+-/* External symbol declarations for the compiler. */\
+-"
+-
+- if test "$dlself" = yes; then
+- $show "generating symbol list for \`$output'"
+-
+- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+-
+- # Add our own program objects to the symbol list.
+- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+- for arg in $progfiles; do
+- $show "extracting global C symbols from \`$arg'"
+- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+- done
+-
+- if test -n "$exclude_expsyms"; then
+- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+- $run eval '$mv "$nlist"T "$nlist"'
+- fi
+-
+- if test -n "$export_symbols_regex"; then
+- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+- $run eval '$mv "$nlist"T "$nlist"'
+- fi
+-
+- # Prepare the list of exported symbols
+- if test -z "$export_symbols"; then
+- export_symbols="$output_objdir/$output.exp"
+- $run $rm $export_symbols
+- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+- else
+- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+- $run eval 'mv "$nlist"T "$nlist"'
+- fi
+- fi
+-
+- for arg in $dlprefiles; do
+- $show "extracting global C symbols from \`$arg'"
+- name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
+- $run eval 'echo ": $name " >> "$nlist"'
+- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+- done
+-
+- if test -z "$run"; then
+- # Make sure we have at least an empty file.
+- test -f "$nlist" || : > "$nlist"
+-
+- if test -n "$exclude_expsyms"; then
+- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+- $mv "$nlist"T "$nlist"
+- fi
+-
+- # Try sorting and uniquifying the output.
+- if grep -v "^: " < "$nlist" |
+- if sort -k 3 </dev/null >/dev/null 2>&1; then
+- sort -k 3
+- else
+- sort +2
+- fi |
+- uniq > "$nlist"S; then
+- :
+- else
+- grep -v "^: " < "$nlist" > "$nlist"S
+- fi
+-
+- if test -f "$nlist"S; then
+- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+- else
+- echo '/* NONE */' >> "$output_objdir/$dlsyms"
+- fi
+-
+- $echo >> "$output_objdir/$dlsyms" "\
+-
+-#undef lt_preloaded_symbols
+-
+-#if defined (__STDC__) && __STDC__
+-# define lt_ptr void *
+-#else
+-# define lt_ptr char *
+-# define const
+-#endif
+-
+-/* The mapping between symbol names and symbols. */
+-const struct {
+- const char *name;
+- lt_ptr address;
+-}
+-lt_preloaded_symbols[] =
+-{\
+-"
+-
+- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+-
+- $echo >> "$output_objdir/$dlsyms" "\
+- {0, (lt_ptr) 0}
+-};
+-
+-/* This works around a problem in FreeBSD linker */
+-#ifdef FREEBSD_WORKAROUND
+-static const void *lt_preloaded_setup() {
+- return lt_preloaded_symbols;
+-}
+-#endif
+-
+-#ifdef __cplusplus
+-}
+-#endif\
+-"
+- fi
+-
+- pic_flag_for_symtable=
+- case $host in
+- # compiling the symbol table file with pic_flag works around
+- # a FreeBSD bug that causes programs to crash when -lm is
+- # linked before any other PIC object. But we must not use
+- # pic_flag when linking with -static. The problem exists in
+- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+- case "$compile_command " in
+- *" -static "*) ;;
+- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+- esac;;
+- *-*-hpux*)
+- case "$compile_command " in
+- *" -static "*) ;;
+- *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+- esac
+- esac
+-
+- # Now compile the dynamic symbol file.
+- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+-
+- # Clean up the generated files.
+- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+-
+- # Transform the symbol file into the correct name.
+- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+- ;;
+- *)
+- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+- exit 1
+- ;;
+- esac
+- else
+- # We keep going just in case the user didn't refer to
+- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+- # really was required.
+-
+- # Nullify the symbol file.
+- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+- fi
+-
+- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+- # Replace the output file specification.
+- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+- link_command="$compile_command$compile_rpath"
+-
+- # We have no uninstalled library dependencies, so finalize right now.
+- $show "$link_command"
+- $run eval "$link_command"
+- status=$?
+-
+- # Delete the generated files.
+- if test -n "$dlsyms"; then
+- $show "$rm $output_objdir/${outputname}S.${objext}"
+- $run $rm "$output_objdir/${outputname}S.${objext}"
+- fi
+-
+- exit $status
+- fi
+-
+- if test -n "$shlibpath_var"; then
+- # We should set the shlibpath_var
+- rpath=
+- for dir in $temp_rpath; do
+- case $dir in
+- [\\/]* | [A-Za-z]:[\\/]*)
+- # Absolute path.
+- rpath="$rpath$dir:"
+- ;;
+- *)
+- # Relative path: add a thisdir entry.
+- rpath="$rpath\$thisdir/$dir:"
+- ;;
+- esac
+- done
+- temp_rpath="$rpath"
+- fi
+-
+- if test -n "$compile_shlibpath$finalize_shlibpath"; then
+- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+- fi
+- if test -n "$finalize_shlibpath"; then
+- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+- fi
+-
+- compile_var=
+- finalize_var=
+- if test -n "$runpath_var"; then
+- if test -n "$perm_rpath"; then
+- # We should set the runpath_var.
+- rpath=
+- for dir in $perm_rpath; do
+- rpath="$rpath$dir:"
+- done
+- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+- fi
+- if test -n "$finalize_perm_rpath"; then
+- # We should set the runpath_var.
+- rpath=
+- for dir in $finalize_perm_rpath; do
+- rpath="$rpath$dir:"
+- done
+- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+- fi
+- fi
+-
+- if test "$no_install" = yes; then
+- # We don't need to create a wrapper script.
+- link_command="$compile_var$compile_command$compile_rpath"
+- # Replace the output file specification.
+- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+- # Delete the old output file.
+- $run $rm $output
+- # Link the executable and exit
+- $show "$link_command"
+- $run eval "$link_command" || exit $?
+- exit 0
+- fi
+-
+- if test "$hardcode_action" = relink; then
+- # Fast installation is not supported
+- link_command="$compile_var$compile_command$compile_rpath"
+- relink_command="$finalize_var$finalize_command$finalize_rpath"
+-
+- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+- $echo "$modename: \`$output' will be relinked during installation" 1>&2
+- else
+- if test "$fast_install" != no; then
+- link_command="$finalize_var$compile_command$finalize_rpath"
+- if test "$fast_install" = yes; then
+- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+- else
+- # fast_install is set to needless
+- relink_command=
+- fi
+- else
+- link_command="$compile_var$compile_command$compile_rpath"
+- relink_command="$finalize_var$finalize_command$finalize_rpath"
+- fi
+- fi
+-
+- # Replace the output file specification.
+- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+-
+- # Delete the old output files.
+- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+-
+- $show "$link_command"
+- $run eval "$link_command" || exit $?
+-
+- # Now create the wrapper script.
+- $show "creating $output"
+-
+- # Quote the relink command for shipping.
+- if test -n "$relink_command"; then
+- # Preserve any variables that may affect compiler behavior
+- for var in $variables_saved_for_relink; do
+- if eval test -z \"\${$var+set}\"; then
+- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+- elif eval var_value=\$$var; test -z "$var_value"; then
+- relink_command="$var=; export $var; $relink_command"
+- else
+- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+- relink_command="$var=\"$var_value\"; export $var; $relink_command"
+- fi
+- done
+- relink_command="(cd `pwd`; $relink_command)"
+- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+- fi
+-
+- # Quote $echo for shipping.
+- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+- case $0 in
+- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+- *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+- esac
+- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+- else
+- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+- fi
+-
+- # Only actually do things if our run command is non-null.
+- if test -z "$run"; then
+- # win32 will think the script is a binary if it has
+- # a .exe suffix, so we strip it off here.
+- case $output in
+- *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
+- esac
+- # test for cygwin because mv fails w/o .exe extensions
+- case $host in
+- *cygwin*) exeext=.exe ;;
+- *) exeext= ;;
+- esac
+- $rm $output
+- trap "$rm $output; exit 1" 1 2 15
+-
+- $echo > $output "\
+-#! $SHELL
+-
+-# $output - temporary wrapper script for $objdir/$outputname
+-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+-#
+-# The $output program cannot be directly executed until all the libtool
+-# libraries that it depends on are installed.
+-#
+-# This wrapper script should never be moved out of the build directory.
+-# If it is, it will not operate correctly.
+-
+-# Sed substitution that helps us do robust quoting. It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-Xsed="${SED}"' -e 1s/^X//'
+-sed_quote_subst='$sed_quote_subst'
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+-
+-relink_command=\"$relink_command\"
+-
+-# This environment variable determines our operation mode.
+-if test \"\$libtool_install_magic\" = \"$magic\"; then
+- # install mode needs the following variable:
+- notinst_deplibs='$notinst_deplibs'
+-else
+- # When we are sourced in execute mode, \$file and \$echo are already set.
+- if test \"\$libtool_execute_magic\" != \"$magic\"; then
+- echo=\"$qecho\"
+- file=\"\$0\"
+- # Make sure echo works.
+- if test \"X\$1\" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+- # Yippee, \$echo works!
+- :
+- else
+- # Restart under the correct shell, and then maybe \$echo will work.
+- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+- fi
+- fi\
+-"
+- $echo >> $output "\
+-
+- # Find the directory that this script lives in.
+- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+-
+- # Follow symbolic links until we get to the real thisdir.
+- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+- while test -n \"\$file\"; do
+- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+-
+- # If there was a directory component, then change thisdir.
+- if test \"x\$destdir\" != \"x\$file\"; then
+- case \"\$destdir\" in
+- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+- *) thisdir=\"\$thisdir/\$destdir\" ;;
+- esac
+- fi
+-
+- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+- done
+-
+- # Try to get the absolute directory name.
+- absdir=\`cd \"\$thisdir\" && pwd\`
+- test -n \"\$absdir\" && thisdir=\"\$absdir\"
+-"
+-
+- if test "$fast_install" = yes; then
+- echo >> $output "\
+- program=lt-'$outputname'$exeext
+- progdir=\"\$thisdir/$objdir\"
+-
+- if test ! -f \"\$progdir/\$program\" || \\
+- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+-
+- file=\"\$\$-\$program\"
+-
+- if test ! -d \"\$progdir\"; then
+- $mkdir \"\$progdir\"
+- else
+- $rm \"\$progdir/\$file\"
+- fi"
+-
+- echo >> $output "\
+-
+- # relink executable if necessary
+- if test -n \"\$relink_command\"; then
+- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+- else
+- $echo \"\$relink_command_output\" >&2
+- $rm \"\$progdir/\$file\"
+- exit 1
+- fi
+- fi
+-
+- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+- { $rm \"\$progdir/\$program\";
+- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+- $rm \"\$progdir/\$file\"
+- fi"
+- else
+- echo >> $output "\
+- program='$outputname'
+- progdir=\"\$thisdir/$objdir\"
+-"
+- fi
+-
+- echo >> $output "\
+-
+- if test -f \"\$progdir/\$program\"; then"
+-
+- # Export our shlibpath_var if we have one.
+- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+- $echo >> $output "\
+- # Add our own library path to $shlibpath_var
+- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+-
+- # Some systems cannot cope with colon-terminated $shlibpath_var
+- # The second colon is a workaround for a bug in BeOS R4 ${SED}
+- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+-
+- export $shlibpath_var
+-"
+- fi
+-
+- # fixup the dll searchpath if we need to.
+- if test -n "$dllsearchpath"; then
+- $echo >> $output "\
+- # Add the dll search path components to the executable PATH
+- PATH=$dllsearchpath:\$PATH
+-"
+- fi
+-
+- $echo >> $output "\
+- if test \"\$libtool_execute_magic\" != \"$magic\"; then
+- # Run the actual program with our arguments.
+-"
+- case $host in
+- # win32 systems need to use the prog path for dll
+- # lookup to work
+- *-*-cygwin* | *-*-pw32*)
+- $echo >> $output "\
+- exec \$progdir/\$program \${1+\"\$@\"}
+-"
+- ;;
+-
+- # Backslashes separate directories on plain windows
+- *-*-mingw | *-*-os2*)
+- $echo >> $output "\
+- exec \$progdir\\\\\$program \${1+\"\$@\"}
+-"
+- ;;
+-
+- *)
+- $echo >> $output "\
+- # Export the path to the program.
+- PATH=\"\$progdir:\$PATH\"
+- export PATH
+-
+- exec \$program \${1+\"\$@\"}
+-"
+- ;;
+- esac
+- $echo >> $output "\
+- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+- exit 1
+- fi
+- else
+- # The program doesn't exist.
+- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+- \$echo \"This script is just a wrapper for \$program.\" 1>&2
+- echo \"See the $PACKAGE documentation for more information.\" 1>&2
+- exit 1
+- fi
+-fi\
+-"
+- chmod +x $output
+- fi
+- exit 0
+- ;;
+- esac
+-
+- # See if we need to build an old-fashioned archive.
+- for oldlib in $oldlibs; do
+-
+- if test "$build_libtool_libs" = convenience; then
+- oldobjs="$libobjs_save"
+- addlibs="$convenience"
+- build_libtool_libs=no
+- else
+- if test "$build_libtool_libs" = module; then
+- oldobjs="$libobjs_save"
+- build_libtool_libs=no
+- else
+- oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+- fi
+- addlibs="$old_convenience"
+- fi
+-
+- if test -n "$addlibs"; then
+- gentop="$output_objdir/${outputname}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "mkdir $gentop"
+- $run mkdir "$gentop"
+- status=$?
+- if test $status -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
+- generated="$generated $gentop"
+-
+- # Add in members from convenience archives.
+- for xlib in $addlibs; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "mkdir $xdir"
+- $run mkdir "$xdir"
+- status=$?
+- if test $status -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+-
+- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+- done
+- fi
+-
+- # Do each command in the archive commands.
+- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+- eval cmds=\"$old_archive_from_new_cmds\"
+- else
+- # Ensure that we have .o objects in place in case we decided
+- # not to build a shared library, and have fallen back to building
+- # static libs even though --disable-static was passed!
+- for oldobj in $oldobjs; do
+- if test ! -f $oldobj; then
+- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$xdir" = "X$oldobj"; then
+- xdir="."
+- else
+- xdir="$xdir"
+- fi
+- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+- $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+- fi
+- done
+-
+- eval cmds=\"$old_archive_cmds\"
+- fi
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+- done
+-
+- if test -n "$generated"; then
+- $show "${rm}r$generated"
+- $run ${rm}r$generated
+- fi
+-
+- # Now create the libtool archive.
+- case $output in
+- *.la)
+- old_library=
+- test "$build_old_libs" = yes && old_library="$libname.$libext"
+- $show "creating $output"
+-
+- # Preserve any variables that may affect compiler behavior
+- for var in $variables_saved_for_relink; do
+- if eval test -z \"\${$var+set}\"; then
+- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+- elif eval var_value=\$$var; test -z "$var_value"; then
+- relink_command="$var=; export $var; $relink_command"
+- else
+- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+- relink_command="$var=\"$var_value\"; export $var; $relink_command"
+- fi
+- done
+- # Quote the link command for shipping.
+- relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
+- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+-
+- # Only create the output if not a dry run.
+- if test -z "$run"; then
+- for installed in no yes; do
+- if test "$installed" = yes; then
+- if test -z "$install_libdir"; then
+- break
+- fi
+- output="$output_objdir/$outputname"i
+- # Replace all uninstalled libtool libraries with the installed ones
+- newdependency_libs=
+- for deplib in $dependency_libs; do
+- case $deplib in
+- *.la)
+- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+- if test -z "$libdir"; then
+- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+- exit 1
+- fi
+- newdependency_libs="$newdependency_libs $libdir/$name"
+- ;;
+- *) newdependency_libs="$newdependency_libs $deplib" ;;
+- esac
+- done
+- dependency_libs="$newdependency_libs"
+- newdlfiles=
+- for lib in $dlfiles; do
+- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+- if test -z "$libdir"; then
+- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
+- fi
+- newdlfiles="$newdlfiles $libdir/$name"
+- done
+- dlfiles="$newdlfiles"
+- newdlprefiles=
+- for lib in $dlprefiles; do
+- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+- if test -z "$libdir"; then
+- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
+- fi
+- newdlprefiles="$newdlprefiles $libdir/$name"
+- done
+- dlprefiles="$newdlprefiles"
+- fi
+- $rm $output
+- # place dlname in correct position for cygwin
+- tdlname=$dlname
+- case $host,$output,$installed,$module,$dlname in
+- *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+- esac
+- $echo > $output "\
+-# $outputname - a libtool library file
+-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+-#
+-# Please DO NOT delete this file!
+-# It is necessary for linking the library.
+-
+-# The name that we can dlopen(3).
+-dlname='$tdlname'
+-
+-# Names of this library.
+-library_names='$library_names'
+-
+-# The name of the static archive.
+-old_library='$old_library'
+-
+-# Libraries that this one depends upon.
+-dependency_libs='$dependency_libs'
+-
+-# Version information for $libname.
+-current=$current
+-age=$age
+-revision=$revision
+-
+-# Is this an already installed library?
+-installed=$installed
+-
+-# Files to dlopen/dlpreopen
+-dlopen='$dlfiles'
+-dlpreopen='$dlprefiles'
+-
+-# Directory that this library needs to be installed in:
+-libdir='$install_libdir'"
+- if test "$installed" = no && test "$need_relink" = yes; then
+- $echo >> $output "\
+-relink_command=\"$relink_command\""
+- fi
+- done
+- fi
+-
+- # Do a symbolic link so that the libtool archive can be found in
+- # LD_LIBRARY_PATH before the program is installed.
+- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+- ;;
+- esac
+- exit 0
+- ;;
+-
+- # libtool install mode
+- install)
+- modename="$modename: install"
+-
+- # There may be an optional sh(1) argument at the beginning of
+- # install_prog (especially on Windows NT).
+- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+- # Allow the use of GNU shtool's install command.
+- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+- # Aesthetically quote it.
+- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+- case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+- arg="\"$arg\""
+- ;;
+- esac
+- install_prog="$arg "
+- arg="$1"
+- shift
+- else
+- install_prog=
+- arg="$nonopt"
+- fi
+-
+- # The real first argument should be the name of the installation program.
+- # Aesthetically quote it.
+- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+- case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+- arg="\"$arg\""
+- ;;
+- esac
+- install_prog="$install_prog$arg"
+-
+- # We need to accept at least all the BSD install flags.
+- dest=
+- files=
+- opts=
+- prev=
+- install_type=
+- isdir=no
+- stripme=
+- for arg
+- do
+- if test -n "$dest"; then
+- files="$files $dest"
+- dest="$arg"
+- continue
+- fi
+-
+- case $arg in
+- -d) isdir=yes ;;
+- -f) prev="-f" ;;
+- -g) prev="-g" ;;
+- -m) prev="-m" ;;
+- -o) prev="-o" ;;
+- -s)
+- stripme=" -s"
+- continue
+- ;;
+- -*) ;;
+-
+- *)
+- # If the previous option needed an argument, then skip it.
+- if test -n "$prev"; then
+- prev=
+- else
+- dest="$arg"
+- continue
+- fi
+- ;;
+- esac
+-
+- # Aesthetically quote the argument.
+- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+- case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+- arg="\"$arg\""
+- ;;
+- esac
+- install_prog="$install_prog $arg"
+- done
+-
+- if test -z "$install_prog"; then
+- $echo "$modename: you must specify an install program" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- if test -n "$prev"; then
+- $echo "$modename: the \`$prev' option requires an argument" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- if test -z "$files"; then
+- if test -z "$dest"; then
+- $echo "$modename: no file or destination specified" 1>&2
+- else
+- $echo "$modename: you must specify a destination" 1>&2
+- fi
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- # Strip any trailing slash from the destination.
+- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+-
+- # Check to see that the destination is a directory.
+- test -d "$dest" && isdir=yes
+- if test "$isdir" = yes; then
+- destdir="$dest"
+- destname=
+- else
+- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+- test "X$destdir" = "X$dest" && destdir=.
+- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+-
+- # Not a directory, so check to see that there is only one file specified.
+- set dummy $files
+- if test $# -gt 2; then
+- $echo "$modename: \`$dest' is not a directory" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+- fi
+- case $destdir in
+- [\\/]* | [A-Za-z]:[\\/]*) ;;
+- *)
+- for file in $files; do
+- case $file in
+- *.lo) ;;
+- *)
+- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- ;;
+- esac
+- done
+- ;;
+- esac
+-
+- # This variable tells wrapper scripts just to set variables rather
+- # than running their programs.
+- libtool_install_magic="$magic"
+-
+- staticlibs=
+- future_libdirs=
+- current_libdirs=
+- for file in $files; do
+-
+- # Do each installation.
+- case $file in
+- *.$libext)
+- # Do the static libraries later.
+- staticlibs="$staticlibs $file"
+- ;;
+-
+- *.la)
+- # Check to see that this really is a libtool archive.
+- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+- else
+- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- library_names=
+- old_library=
+- relink_command=
+- # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . $file ;;
+- *) . ./$file ;;
+- esac
+-
+- # Add the libdir to current_libdirs if it is the destination.
+- if test "X$destdir" = "X$libdir"; then
+- case "$current_libdirs " in
+- *" $libdir "*) ;;
+- *) current_libdirs="$current_libdirs $libdir" ;;
+- esac
+- else
+- # Note the libdir as a future libdir.
+- case "$future_libdirs " in
+- *" $libdir "*) ;;
+- *) future_libdirs="$future_libdirs $libdir" ;;
+- esac
+- fi
+-
+- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+- test "X$dir" = "X$file/" && dir=
+- dir="$dir$objdir"
+-
+- if test -n "$relink_command"; then
+- # Determine the prefix the user has applied to our future dir.
+- inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"`
+-
+- # Don't allow the user to place us outside of our expected
+- # location b/c this prevents finding dependent libraries that
+- # are installed to the same prefix.
+- if test "$inst_prefix_dir" = "$destdir"; then
+- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+- exit 1
+- fi
+-
+- if test -n "$inst_prefix_dir"; then
+- # Stick the inst_prefix_dir data into the link command.
+- relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+- else
+- relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"`
+- fi
+-
+- $echo "$modename: warning: relinking \`$file'" 1>&2
+- $show "$relink_command"
+- if $run eval "$relink_command"; then :
+- else
+- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+- continue
+- fi
+- fi
+-
+- # See the names of the shared library.
+- set dummy $library_names
+- if test -n "$2"; then
+- realname="$2"
+- shift
+- shift
+-
+- srcname="$realname"
+- test -n "$relink_command" && srcname="$realname"T
+-
+- # Install the shared library and build the symlinks.
+- $show "$install_prog $dir/$srcname $destdir/$realname"
+- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+- if test -n "$stripme" && test -n "$striplib"; then
+- $show "$striplib $destdir/$realname"
+- $run eval "$striplib $destdir/$realname" || exit $?
+- fi
+-
+- if test $# -gt 0; then
+- # Delete the old symlinks, and create new ones.
+- for linkname
+- do
+- if test "$linkname" != "$realname"; then
+- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+- fi
+- done
+- fi
+-
+- # Do each command in the postinstall commands.
+- lib="$destdir/$realname"
+- eval cmds=\"$postinstall_cmds\"
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+- fi
+-
+- # Install the pseudo-library for information purposes.
+- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+- instname="$dir/$name"i
+- $show "$install_prog $instname $destdir/$name"
+- $run eval "$install_prog $instname $destdir/$name" || exit $?
+-
+- # Maybe install the static library, too.
+- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+- ;;
+-
+- *.lo)
+- # Install (i.e. copy) a libtool object.
+-
+- # Figure out destination file name, if it wasn't already specified.
+- if test -n "$destname"; then
+- destfile="$destdir/$destname"
+- else
+- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+- destfile="$destdir/$destfile"
+- fi
+-
+- # Deduce the name of the destination old-style object file.
+- case $destfile in
+- *.lo)
+- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+- ;;
+- *.$objext)
+- staticdest="$destfile"
+- destfile=
+- ;;
+- *)
+- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- ;;
+- esac
+-
+- # Install the libtool object if requested.
+- if test -n "$destfile"; then
+- $show "$install_prog $file $destfile"
+- $run eval "$install_prog $file $destfile" || exit $?
+- fi
+-
+- # Install the old object if enabled.
+- if test "$build_old_libs" = yes; then
+- # Deduce the name of the old-style object file.
+- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+-
+- $show "$install_prog $staticobj $staticdest"
+- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+- fi
+- exit 0
+- ;;
+-
+- *)
+- # Figure out destination file name, if it wasn't already specified.
+- if test -n "$destname"; then
+- destfile="$destdir/$destname"
+- else
+- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+- destfile="$destdir/$destfile"
+- fi
+-
+- # Do a test to see if this is really a libtool program.
+- case $host in
+- *cygwin*|*mingw*)
+- wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
+- ;;
+- *)
+- wrapper=$file
+- ;;
+- esac
+- if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+- notinst_deplibs=
+- relink_command=
+-
+- # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . $wrapper ;;
+- *) . ./$wrapper ;;
+- esac
+-
+- # Check the variables that should have been set.
+- if test -z "$notinst_deplibs"; then
+- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+- exit 1
+- fi
+-
+- finalize=yes
+- for lib in $notinst_deplibs; do
+- # Check to see that each library is installed.
+- libdir=
+- if test -f "$lib"; then
+- # If there is no directory component, then add one.
+- case $lib in
+- */* | *\\*) . $lib ;;
+- *) . ./$lib ;;
+- esac
+- fi
+- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+- if test -n "$libdir" && test ! -f "$libfile"; then
+- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+- finalize=no
+- fi
+- done
+-
+- relink_command=
+- # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . $wrapper ;;
+- *) . ./$wrapper ;;
+- esac
+-
+- outputname=
+- if test "$fast_install" = no && test -n "$relink_command"; then
+- if test "$finalize" = yes && test -z "$run"; then
+- tmpdir="/tmp"
+- test -n "$TMPDIR" && tmpdir="$TMPDIR"
+- tmpdir=`mktemp -d $tmpdir/libtool-XXXXXX 2> /dev/null`
+- if test $? = 0 ; then :
+- else
+- tmpdir="$tmpdir/libtool-$$"
+- fi
+- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+- else
+- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+- continue
+- fi
+- file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+- outputname="$tmpdir/$file"
+- # Replace the output file specification.
+- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+-
+- $show "$relink_command"
+- if $run eval "$relink_command"; then :
+- else
+- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+- ${rm}r "$tmpdir"
+- continue
+- fi
+- file="$outputname"
+- else
+- $echo "$modename: warning: cannot relink \`$file'" 1>&2
+- fi
+- else
+- # Install the binary that we compiled earlier.
+- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+- fi
+- fi
+-
+- # remove .exe since cygwin /usr/bin/install will append another
+- # one anyways
+- case $install_prog,$host in
+- /usr/bin/install*,*cygwin*)
+- case $file:$destfile in
+- *.exe:*.exe)
+- # this is ok
+- ;;
+- *.exe:*)
+- destfile=$destfile.exe
+- ;;
+- *:*.exe)
+- destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
+- ;;
+- esac
+- ;;
+- esac
+- $show "$install_prog$stripme $file $destfile"
+- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+- test -n "$outputname" && ${rm}r "$tmpdir"
+- ;;
+- esac
+- done
+-
+- for file in $staticlibs; do
+- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-
+- # Set up the ranlib parameters.
+- oldlib="$destdir/$name"
+-
+- $show "$install_prog $file $oldlib"
+- $run eval "$install_prog \$file \$oldlib" || exit $?
+-
+- if test -n "$stripme" && test -n "$striplib"; then
+- $show "$old_striplib $oldlib"
+- $run eval "$old_striplib $oldlib" || exit $?
+- fi
+-
+- # Do each command in the postinstall commands.
+- eval cmds=\"$old_postinstall_cmds\"
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || exit $?
+- done
+- IFS="$save_ifs"
+- done
+-
+- if test -n "$future_libdirs"; then
+- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+- fi
+-
+- if test -n "$current_libdirs"; then
+- # Maybe just do a dry run.
+- test -n "$run" && current_libdirs=" -n$current_libdirs"
+- exec_cmd='$SHELL $0 --finish$current_libdirs'
+- else
+- exit 0
+- fi
+- ;;
+-
+- # libtool finish mode
+- finish)
+- modename="$modename: finish"
+- libdirs="$nonopt"
+- admincmds=
+-
+- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+- for dir
+- do
+- libdirs="$libdirs $dir"
+- done
+-
+- for libdir in $libdirs; do
+- if test -n "$finish_cmds"; then
+- # Do each command in the finish commands.
+- eval cmds=\"$finish_cmds\"
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd" || admincmds="$admincmds
+- $cmd"
+- done
+- IFS="$save_ifs"
+- fi
+- if test -n "$finish_eval"; then
+- # Do the single finish_eval.
+- eval cmds=\"$finish_eval\"
+- $run eval "$cmds" || admincmds="$admincmds
+- $cmds"
+- fi
+- done
+- fi
+-
+- # Exit here if they wanted silent mode.
+- test "$show" = ":" && exit 0
+-
+- echo "----------------------------------------------------------------------"
+- echo "Libraries have been installed in:"
+- for libdir in $libdirs; do
+- echo " $libdir"
+- done
+- echo
+- echo "If you ever happen to want to link against installed libraries"
+- echo "in a given directory, LIBDIR, you must either use libtool, and"
+- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+- echo "flag during linking and do at least one of the following:"
+- if test -n "$shlibpath_var"; then
+- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+- echo " during execution"
+- fi
+- if test -n "$runpath_var"; then
+- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+- echo " during linking"
+- fi
+- if test -n "$hardcode_libdir_flag_spec"; then
+- libdir=LIBDIR
+- eval flag=\"$hardcode_libdir_flag_spec\"
+-
+- echo " - use the \`$flag' linker flag"
+- fi
+- if test -n "$admincmds"; then
+- echo " - have your system administrator run these commands:$admincmds"
+- fi
+- if test -f /etc/ld.so.conf; then
+- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+- fi
+- echo
+- echo "See any operating system documentation about shared libraries for"
+- echo "more information, such as the ld(1) and ld.so(8) manual pages."
+- echo "----------------------------------------------------------------------"
+- exit 0
+- ;;
+-
+- # libtool execute mode
+- execute)
+- modename="$modename: execute"
+-
+- # The first argument is the command name.
+- cmd="$nonopt"
+- if test -z "$cmd"; then
+- $echo "$modename: you must specify a COMMAND" 1>&2
+- $echo "$help"
+- exit 1
+- fi
+-
+- # Handle -dlopen flags immediately.
+- for file in $execute_dlfiles; do
+- if test ! -f "$file"; then
+- $echo "$modename: \`$file' is not a file" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- dir=
+- case $file in
+- *.la)
+- # Check to see that this really is a libtool archive.
+- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+- else
+- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- # Read the libtool library.
+- dlname=
+- library_names=
+-
+- # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . $file ;;
+- *) . ./$file ;;
+- esac
+-
+- # Skip this library if it cannot be dlopened.
+- if test -z "$dlname"; then
+- # Warn if it was a shared library.
+- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+- continue
+- fi
+-
+- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+- test "X$dir" = "X$file" && dir=.
+-
+- if test -f "$dir/$objdir/$dlname"; then
+- dir="$dir/$objdir"
+- else
+- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+- exit 1
+- fi
+- ;;
+-
+- *.lo)
+- # Just add the directory containing the .lo file.
+- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+- test "X$dir" = "X$file" && dir=.
+- ;;
+-
+- *)
+- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+- continue
+- ;;
+- esac
+-
+- # Get the absolute pathname.
+- absdir=`cd "$dir" && pwd`
+- test -n "$absdir" && dir="$absdir"
+-
+- # Now add the directory to shlibpath_var.
+- if eval "test -z \"\$$shlibpath_var\""; then
+- eval "$shlibpath_var=\"\$dir\""
+- else
+- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+- fi
+- done
+-
+- # This variable tells wrapper scripts just to set shlibpath_var
+- # rather than running their programs.
+- libtool_execute_magic="$magic"
+-
+- # Check if any of the arguments is a wrapper script.
+- args=
+- for file
+- do
+- case $file in
+- -*) ;;
+- *)
+- # Do a test to see if this is really a libtool program.
+- if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+- # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . $file ;;
+- *) . ./$file ;;
+- esac
+-
+- # Transform arg to wrapped name.
+- file="$progdir/$program"
+- fi
+- ;;
+- esac
+- # Quote arguments (to preserve shell metacharacters).
+- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+- args="$args \"$file\""
+- done
+-
+- if test -z "$run"; then
+- if test -n "$shlibpath_var"; then
+- # Export the shlibpath_var.
+- eval "export $shlibpath_var"
+- fi
+-
+- # Restore saved enviroment variables
+- if test "${save_LC_ALL+set}" = set; then
+- LC_ALL="$save_LC_ALL"; export LC_ALL
+- fi
+- if test "${save_LANG+set}" = set; then
+- LANG="$save_LANG"; export LANG
+- fi
+-
+- # Now prepare to actually exec the command.
+- exec_cmd="\$cmd$args"
+- else
+- # Display what would be done.
+- if test -n "$shlibpath_var"; then
+- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+- $echo "export $shlibpath_var"
+- fi
+- $echo "$cmd$args"
+- exit 0
+- fi
+- ;;
+-
+- # libtool clean and uninstall mode
+- clean | uninstall)
+- modename="$modename: $mode"
+- rm="$nonopt"
+- files=
+- rmforce=
+- exit_status=0
+-
+- # This variable tells wrapper scripts just to set variables rather
+- # than running their programs.
+- libtool_install_magic="$magic"
+-
+- for arg
+- do
+- case $arg in
+- -f) rm="$rm $arg"; rmforce=yes ;;
+- -*) rm="$rm $arg" ;;
+- *) files="$files $arg" ;;
+- esac
+- done
+-
+- if test -z "$rm"; then
+- $echo "$modename: you must specify an RM program" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- rmdirs=
+-
+- for file in $files; do
+- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+- if test "X$dir" = "X$file"; then
+- dir=.
+- objdir="$objdir"
+- else
+- objdir="$dir/$objdir"
+- fi
+- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+- test "$mode" = uninstall && objdir="$dir"
+-
+- # Remember objdir for removal later, being careful to avoid duplicates
+- if test "$mode" = clean; then
+- case " $rmdirs " in
+- *" $objdir "*) ;;
+- *) rmdirs="$rmdirs $objdir" ;;
+- esac
+- fi
+-
+- # Don't error if the file doesn't exist and rm -f was used.
+- if (test -L "$file") >/dev/null 2>&1 \
+- || (test -h "$file") >/dev/null 2>&1 \
+- || test -f "$file"; then
+- :
+- elif test -d "$file"; then
+- exit_status=1
+- continue
+- elif test "$rmforce" = yes; then
+- continue
+- fi
+-
+- rmfiles="$file"
+-
+- case $name in
+- *.la)
+- # Possibly a libtool archive, so verify it.
+- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+- . $dir/$name
+-
+- # Delete the libtool libraries and symlinks.
+- for n in $library_names; do
+- rmfiles="$rmfiles $objdir/$n"
+- done
+- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+-
+- if test "$mode" = uninstall; then
+- if test -n "$library_names"; then
+- # Do each command in the postuninstall commands.
+- eval cmds=\"$postuninstall_cmds\"
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd"
+- if test $? != 0 && test "$rmforce" != yes; then
+- exit_status=1
+- fi
+- done
+- IFS="$save_ifs"
+- fi
+-
+- if test -n "$old_library"; then
+- # Do each command in the old_postuninstall commands.
+- eval cmds=\"$old_postuninstall_cmds\"
+- save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
+- IFS="$save_ifs"
+- $show "$cmd"
+- $run eval "$cmd"
+- if test $? != 0 && test "$rmforce" != yes; then
+- exit_status=1
+- fi
+- done
+- IFS="$save_ifs"
+- fi
+- # FIXME: should reinstall the best remaining shared library.
+- fi
+- fi
+- ;;
+-
+- *.lo)
+- if test "$build_old_libs" = yes; then
+- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+- rmfiles="$rmfiles $dir/$oldobj"
+- fi
+- ;;
+-
+- *)
+- # Do a test to see if this is a libtool program.
+- if test "$mode" = clean &&
+- (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+- relink_command=
+- . $dir/$file
+-
+- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+- if test "$fast_install" = yes && test -n "$relink_command"; then
+- rmfiles="$rmfiles $objdir/lt-$name"
+- fi
+- fi
+- ;;
+- esac
+- $show "$rm $rmfiles"
+- $run $rm $rmfiles || exit_status=1
+- done
+-
+- # Try to remove the ${objdir}s in the directories where we deleted files
+- for dir in $rmdirs; do
+- if test -d "$dir"; then
+- $show "rmdir $dir"
+- $run rmdir $dir >/dev/null 2>&1
+- fi
+- done
+-
+- exit $exit_status
+- ;;
+-
+- "")
+- $echo "$modename: you must specify a MODE" 1>&2
+- $echo "$generic_help" 1>&2
+- exit 1
+- ;;
+- esac
+-
+- if test -z "$exec_cmd"; then
+- $echo "$modename: invalid operation mode \`$mode'" 1>&2
+- $echo "$generic_help" 1>&2
+- exit 1
+- fi
+-fi # test -z "$show_help"
+-
+-if test -n "$exec_cmd"; then
+- eval exec $exec_cmd
+- exit 1
+-fi
+-
+-# We need to display help for each of the modes.
+-case $mode in
+-"") $echo \
+-"Usage: $modename [OPTION]... [MODE-ARG]...
+-
+-Provide generalized library-building support services.
+-
+- --config show all configuration variables
+- --debug enable verbose shell tracing
+--n, --dry-run display commands without modifying any files
+- --features display basic configuration information and exit
+- --finish same as \`--mode=finish'
+- --help display this help message and exit
+- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
+- --quiet same as \`--silent'
+- --silent don't print informational messages
+- --version print version information
+-
+-MODE must be one of the following:
+-
+- clean remove files from the build directory
+- compile compile a source file into a libtool object
+- execute automatically set library path, then run a program
+- finish complete the installation of libtool libraries
+- install install libraries or executables
+- link create a library or an executable
+- uninstall remove libraries from an installed directory
+-
+-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
+-a more detailed description of MODE."
+- exit 0
+- ;;
+-
+-clean)
+- $echo \
+-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+-
+-Remove files from the build directory.
+-
+-RM is the name of the program to use to delete files associated with each FILE
+-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+-to RM.
+-
+-If FILE is a libtool library, object or program, all the files associated
+-with it are deleted. Otherwise, only FILE itself is deleted using RM."
+- ;;
+-
+-compile)
+- $echo \
+-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+-
+-Compile a source file into a libtool library object.
+-
+-This mode accepts the following additional options:
+-
+- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+- -prefer-pic try to building PIC objects only
+- -prefer-non-pic try to building non-PIC objects only
+- -static always build a \`.o' file suitable for static linking
+-
+-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+-from the given SOURCEFILE.
+-
+-The output file name is determined by removing the directory component from
+-SOURCEFILE, then substituting the C source code suffix \`.c' with the
+-library object suffix, \`.lo'."
+- ;;
+-
+-execute)
+- $echo \
+-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+-
+-Automatically set library path, then run a program.
+-
+-This mode accepts the following additional options:
+-
+- -dlopen FILE add the directory containing FILE to the library path
+-
+-This mode sets the library path environment variable according to \`-dlopen'
+-flags.
+-
+-If any of the ARGS are libtool executable wrappers, then they are translated
+-into their corresponding uninstalled binary, and any of their required library
+-directories are added to the library path.
+-
+-Then, COMMAND is executed, with ARGS as arguments."
+- ;;
+-
+-finish)
+- $echo \
+-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+-
+-Complete the installation of libtool libraries.
+-
+-Each LIBDIR is a directory that contains libtool libraries.
+-
+-The commands that this mode executes may require superuser privileges. Use
+-the \`--dry-run' option if you just want to see what would be executed."
+- ;;
+-
+-install)
+- $echo \
+-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+-
+-Install executables or libraries.
+-
+-INSTALL-COMMAND is the installation command. The first component should be
+-either the \`install' or \`cp' program.
+-
+-The rest of the components are interpreted as arguments to that command (only
+-BSD-compatible install options are recognized)."
+- ;;
+-
+-link)
+- $echo \
+-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+-
+-Link object files or libraries together to form another library, or to
+-create an executable program.
+-
+-LINK-COMMAND is a command using the C compiler that you would use to create
+-a program from several object files.
+-
+-The following components of LINK-COMMAND are treated specially:
+-
+- -all-static do not do any dynamic linking at all
+- -avoid-version do not add a version suffix if possible
+- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+- -export-symbols SYMFILE
+- try to export only the symbols listed in SYMFILE
+- -export-symbols-regex REGEX
+- try to export only the symbols matching REGEX
+- -LLIBDIR search LIBDIR for required installed libraries
+- -lNAME OUTPUT-FILE requires the installed library libNAME
+- -module build a library that can dlopened
+- -no-fast-install disable the fast-install mode
+- -no-install link a not-installable executable
+- -no-undefined declare that a library does not refer to external symbols
+- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+- -release RELEASE specify package release information
+- -rpath LIBDIR the created library will eventually be installed in LIBDIR
+- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+- -static do not do any dynamic linking of libtool libraries
+- -version-info CURRENT[:REVISION[:AGE]]
+- specify library version info [each variable defaults to 0]
+-
+-All other options (arguments beginning with \`-') are ignored.
+-
+-Every other argument is treated as a filename. Files ending in \`.la' are
+-treated as uninstalled libtool libraries, other files are standard or library
+-object files.
+-
+-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+-required, except when creating a convenience library.
+-
+-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+-using \`ar' and \`ranlib', or on Windows using \`lib'.
+-
+-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+-is created, otherwise an executable program is created."
+- ;;
+-
+-uninstall)
+- $echo \
+-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+-
+-Remove libraries from an installation directory.
+-
+-RM is the name of the program to use to delete files associated with each FILE
+-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+-to RM.
+-
+-If FILE is a libtool library, all the files associated with it are deleted.
+-Otherwise, only FILE itself is deleted using RM."
+- ;;
+-
+-*)
+- $echo "$modename: invalid operation mode \`$mode'" 1>&2
+- $echo "$help" 1>&2
+- exit 1
+- ;;
+-esac
+-
+-echo
+-$echo "Try \`$modename --help' for more information about other modes."
+-
+-exit 0
+-
+-# Local Variables:
+-# mode:shell-script
+-# sh-indentation:2
+-# End:
Modified: qutecom/tags/2.2~rc3.dfsg0-1/debian/patches/series
URL: http://svn.debian.org/wsvn/pkg-voip/qutecom/tags/2.2%7Erc3.dfsg0-1/debian/patches/series?rev=6730&op=diff
==============================================================================
--- qutecom/tags/2.2~rc3.dfsg0-1/debian/patches/series (original)
+++ qutecom/tags/2.2~rc3.dfsg0-1/debian/patches/series Fri Feb 6 04:15:22 2009
@@ -7,3 +7,4 @@
debian/cmake-noavformat.patch
debian/remove-extra-copying-file.patch
debian/cmake-force-fpic.patch
+debian/remove-old-ltmain.patch
Modified: qutecom/tags/2.2~rc3.dfsg0-1/debian/rules
URL: http://svn.debian.org/wsvn/pkg-voip/qutecom/tags/2.2%7Erc3.dfsg0-1/debian/rules?rev=6730&op=diff
==============================================================================
--- qutecom/tags/2.2~rc3.dfsg0-1/debian/rules (original)
+++ qutecom/tags/2.2~rc3.dfsg0-1/debian/rules Fri Feb 6 04:15:22 2009
@@ -7,7 +7,6 @@
DEB_DESTDIR=$(CURDIR)/debian/qutecom
DEB_DH_STRIP_ARGS := --dbg-package=qutecom
-DEB_INSTALL_MANPAGES_qutecom := $(CURDIR)/debian/qutecom.1
DEB_INSTALL_DOCS_qutecom := $(CURDIR)/wengophone/AUTHORS
DEB_CMAKE_EXTRA_FLAGS := -DQT_UIC_EXECUTABLE=/usr/bin/uic-qt4 \
@@ -34,6 +33,10 @@
# Avoid postinst-has-useless-call-to-ldconfig
DEB_DH_MAKESHLIBS_ARGS_qutecom := -n
+install/qutecom-data::
+ mkdir -p $(DEB_DESTDIR)-data/usr
+ mv $(DEB_DESTDIR)/usr/share $(DEB_DESTDIR)-data/usr
+
DEBVERSION:=$(shell head -n 1 debian/changelog | sed -e 's/^[^(]*(\([^)]*\)).*/\1/')
SRCVERSION:=$(shell echo $(DEBVERSION) | sed -e 's/^.*://' -e 's/-[.0-9]*$$//')
UPVERSION:=$(shell echo $(SRCVERSION) | sed -e 's/-svn.*$$//' -e 's/\.dfsg.*$$//')
More information about the Pkg-voip-commits
mailing list