[Pkg-voip-commits] [dahdi-tools] 73/285: xpp: echo_loader.c: add AB id to messages
tzafrir at debian.org
tzafrir at debian.org
Thu Jul 7 19:18:32 UTC 2016
This is an automated email from the git hooks/post-receive script.
tzafrir pushed a commit to branch master
in repository dahdi-tools.
commit d7e24fde01cb86049108d5db2f93df217669a9fa
Author: Oron Peled <oron.peled at xorcom.com>
Date: Thu Mar 15 20:42:10 2012 +0000
xpp: echo_loader.c: add AB id to messages
* Define new macros AB_INFO(), AB_ERR() that prefix their message
with the astribank information (usb device + serial number)
* Replace all INFO()/ERR() messages in echo_loader.c with the new macros
Signed-off-by: Oron Peled <oron.peled at xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen at xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10498 17933a7a-c749-41c5-a318-cba88f637d49
---
xpp/astribank_usb.h | 12 +++++++++++
xpp/echo_loader.c | 57 +++++++++++++++++++++++------------------------------
2 files changed, 37 insertions(+), 32 deletions(-)
diff --git a/xpp/astribank_usb.h b/xpp/astribank_usb.h
index b65c1db..69778e6 100644
--- a/xpp/astribank_usb.h
+++ b/xpp/astribank_usb.h
@@ -98,4 +98,16 @@ int eeprom_fill(struct eeprom_table *eprm,
int astribank_has_twinstar(struct astribank_device *astribank);
int label_isvalid(const char *label);
+#define AB_REPORT(report_type, astribank, fmt, ...) \
+ report_type("%s [%s]: " fmt, \
+ xusb_devpath((astribank)->xusb), \
+ xusb_serial((astribank)->xusb), \
+ ## __VA_ARGS__)
+
+#define AB_INFO(astribank, fmt, ...) \
+ AB_REPORT(INFO, astribank, fmt, ## __VA_ARGS__)
+
+#define AB_ERR(astribank, fmt, ...) \
+ AB_REPORT(ERR, astribank, fmt, ## __VA_ARGS__)
+
#endif /* ASTRIBANK_USB_H */
diff --git a/xpp/echo_loader.c b/xpp/echo_loader.c
index eaf183b..2e9e696 100644
--- a/xpp/echo_loader.c
+++ b/xpp/echo_loader.c
@@ -123,9 +123,7 @@ static void usb_buffer_showstatistics(struct astribank_device *astribank, struct
long usec;
usec = usb_buffer_usec(ub);
- INFO("%s [%s]: Octasic statistics: packet_size=[%d, %ld, %d] packets=%d, bytes=%ld msec=%ld usec/packet=%d\n",
- xusb_devpath(astribank->xusb),
- xusb_serial(astribank->xusb),
+ AB_INFO(astribank, "Octasic statistics: packet_size=[%d, %ld, %d] packets=%d, bytes=%ld msec=%ld usec/packet=%d\n",
ub->min_send,
ub->total_bytes / ub->num_sends,
ub->max_send,
@@ -144,7 +142,7 @@ static int usb_buffer_flush(struct astribank_device *astribank, struct usb_buffe
return 0;
ret = xusb_send(astribank->xusb, ub->data, ub->curr, TIMEOUT);
if(ret < 0) {
- ERR("xusb_send failed: %d\n", ret);
+ AB_ERR(astribank, "xusb_send failed: %d\n", ret);
return ret;
}
DBG("%s: Written %d bytes\n", __func__, ret);
@@ -179,7 +177,7 @@ static int usb_buffer_append(struct astribank_device *astribank, struct usb_buff
char *buf, int len)
{
if (ub->curr + len >= ub->max_len) {
- ERR("%s: buffer too small ub->curr=%d, len=%d, ub->max_len=%d\n",
+ AB_ERR(astribank, "%s: buffer too small ub->curr=%d, len=%d, ub->max_len=%d\n",
__func__, ub->curr, len, ub->max_len);
return -ENOMEM;
}
@@ -211,13 +209,13 @@ static int usb_buffer_send(struct astribank_device *astribank, struct usb_buffer
return ret;
ret = xusb_recv(astribank->xusb, buf, PACKET_SIZE, TIMEOUT);
if(ret <= 0) {
- ERR("No USB packs to read: %s\n", strerror(-ret));
+ AB_ERR(astribank, "No USB packs to read: %s\n", strerror(-ret));
return -EINVAL;
}
DBG("%s: %d bytes recv\n", __func__, ret);
phead = (struct xpp_packet_header *)buf;
if(phead->header.op != SPI_RCV_XOP && phead->header.op != TST_RCV_XOP) {
- ERR("Got unexpected reply OP=0x%02X\n", phead->header.op);
+ AB_ERR(astribank, "Got unexpected reply OP=0x%02X\n", phead->header.op);
dump_packet(LOG_ERR, DBG_MASK, "hexline[ERR]", buf, ret);
return -EINVAL;
}
@@ -260,7 +258,7 @@ int spi_send(struct astribank_device *astribank, uint16_t addr, uint16_t data, i
ret = usb_buffer_send(astribank, &usb_buffer, buf, pack_len, TIMEOUT, recv_answer);
if(ret < 0) {
- ERR("usb_buffer_send failed: %d\n", ret);
+ AB_ERR(astribank, "usb_buffer_send failed: %d\n", ret);
return ret;
}
DBG("%s: Written %d bytes\n", __func__, ret);
@@ -287,7 +285,7 @@ int test_send(struct astribank_device *astribank)
ret = usb_buffer_send(astribank, &usb_buffer, buf, pack_len, TIMEOUT, 1);
if(ret < 0) {
- ERR("usb_buffer_send failed: %d\n", ret);
+ AB_ERR(astribank, "usb_buffer_send failed: %d\n", ret);
return ret;
}
DBG("%s: Written %d bytes\n", __func__, ret);
@@ -513,16 +511,13 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
test_send(astribank);
cpld_ver = get_ver(astribank);
- INFO("%s [%s]: Check EC_CPLD version: %d\n",
- xusb_devpath(astribank->xusb),
- xusb_serial(astribank->xusb),
- cpld_ver);
+ AB_INFO(astribank, "Check EC_CPLD version: %d\n", cpld_ver);
if (cpld_ver < 0)
return cpld_ver;
else if (cpld_ver == EC_VER_TEST) {
- INFO("+---------------------------------------------------------+\n");
- INFO("| WARNING: TEST HARDWARE IS ON THE BOARD INSTEAD OF EC!!! |\n");
- INFO("+---------------------------------------------------------+\n");
+ AB_INFO(astribank, "+---------------------------------------------------------+\n");
+ AB_INFO(astribank, "| WARNING: TEST HARDWARE IS ON THE BOARD INSTEAD OF EC!!! |\n");
+ AB_INFO(astribank, "+---------------------------------------------------------+\n");
return cOCT6100_ERR_OK;
}
@@ -537,7 +532,7 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
memset(&OpenChip, 0, sizeof(tOCT6100_CHIP_OPEN));
if (!(echo_mod = malloc(sizeof(struct echo_mod)))) {
- ERR("cannot allocate memory for echo_mod\n");
+ AB_ERR(astribank, "cannot allocate memory for echo_mod\n");
return 1;
}
DBG("allocated mem for echo_mod\n");
@@ -548,7 +543,7 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
ulResult = Oct6100ChipOpenDef( &OpenChip );
if (ulResult != cOCT6100_ERR_OK) {
- ERR("Oct6100ChipOpenDef failed: result=%X\n", ulResult);
+ AB_ERR(astribank, "Oct6100ChipOpenDef failed: result=%X\n", ulResult);
return ulResult;
}
@@ -594,11 +589,11 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
&ulImageByteSize );
if (pbyImageData == NULL || ulImageByteSize == 0){
- ERR("Bad pbyImageData or ulImageByteSize\n");
+ AB_ERR(astribank, "Bad pbyImageData or ulImageByteSize\n");
return 1;
}
if ( ulResult != 0 ) {
- ERR("Failed load_file %s (%08X)\n", filename, ulResult);
+ AB_ERR(astribank, "Failed load_file %s (%08X)\n", filename, ulResult);
return ulResult;
}
@@ -613,7 +608,7 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
ulResult = Oct6100GetInstanceSize(&OpenChip, &InstanceSize );
if (ulResult != cOCT6100_ERR_OK)
{
- ERR("Oct6100GetInstanceSize failed (%08X)\n", ulResult);
+ AB_ERR(astribank, "Oct6100GetInstanceSize failed (%08X)\n", ulResult);
return ulResult;
}
@@ -622,14 +617,14 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
echo_mod->astribank = astribank;
if (!pApiInstance) {
- ERR("Out of memory (can't allocate %d bytes)!\n", InstanceSize.ulApiInstanceSize);
+ AB_ERR(astribank, "Out of memory (can't allocate %d bytes)!\n", InstanceSize.ulApiInstanceSize);
return 1;
}
/* Perform actual open of chip */
ulResult = Oct6100ChipOpen(pApiInstance, &OpenChip);
if (ulResult != cOCT6100_ERR_OK) {
- ERR("Oct6100ChipOpen failed: result=%X\n", ulResult);
+ AB_ERR(astribank, "Oct6100ChipOpen failed: result=%X\n", ulResult);
return ulResult;
}
DBG("%s: OCT6100 is open\n", __func__);
@@ -687,7 +682,7 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
ulResult = Oct6100ChannelOpen( pApiInstance,
&ChannelOpen );
if (ulResult != cOCT6100_ERR_OK) {
- ERR("Found error on chan %d\n", nChan);
+ AB_ERR(astribank, "Found error on chan %d\n", nChan);
return ulResult;
}
}
@@ -736,7 +731,7 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
ulResult = Oct6100ChannelOpen( pApiInstance,
&ChannelOpen );
if (ulResult != cOCT6100_ERR_OK) {
- ERR("Found error on chan %d\n", nChan);
+ AB_ERR(astribank, "Found error on chan %d\n", nChan);
return ulResult;
}
}
@@ -755,21 +750,19 @@ int load_echo(struct astribank_device *astribank, char *filename, int is_alaw)
int iLen;
int ret;
unsigned char *pbyFileData = NULL;
- const char *devstr;
- devstr = xusb_devpath(astribank->xusb);
- INFO("%s [%s]: Loading ECHOCAN Firmware: %s (%s)\n",
- devstr, xusb_serial(astribank->xusb), filename,
- (is_alaw) ? "alaw" : "ulaw");
+ AB_INFO(astribank, "Loading ECHOCAN Firmware: %s (%s)\n",
+ filename, (is_alaw) ? "alaw" : "ulaw");
usb_buffer_init(astribank, &usb_buffer);
ret = init_octasic(filename, astribank, is_alaw);
if (ret) {
- ERR("ECHO %s burning failed (%08X)\n", filename, ret);
+ AB_ERR(astribank, "ECHO %s burning failed (%08X)\n",
+ filename, ret);
return -ENODEV;
}
ret = usb_buffer_flush(astribank, &usb_buffer);
if (ret < 0) {
- ERR("ECHO %s buffer flush failed (%d)\n", filename, ret);
+ AB_ERR(astribank, "ECHO %s buffer flush failed (%d)\n", filename, ret);
return -ENODEV;
}
usb_buffer_showstatistics(astribank, &usb_buffer);
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-voip/dahdi-tools.git
More information about the Pkg-voip-commits
mailing list