[Pkg-voip-commits] [dahdi-tools] 189/285: system.conf.sample: Remove reference to single frequency signalling.

[tzafrir at debian.org]

This is an automated email from the git hooks/post-receive script.

tzafrir pushed a commit to branch master
in repository dahdi-tools.

commit 2abfd165ae9d6f91d003e84b7efa8926f1b4defb
Author: Shaun Ruffell <sruffell at digium.com>
Date:   Mon May 5 09:42:38 2014 -0500

    system.conf.sample: Remove reference to single frequency signalling.
    
    Single frequency signalling has not been supported in dahdi_cfg since the switch
    to DAHDI. Before DAHDI, in the Zaptel days, it was only suported in the
    ztcfg_dude utility which wasn't mainlined. So this removes references to those
    signalling modes unless support is added back into the driver.
    
    Internal-Issue-ID: DAHLIN-335
    Signed-off-by: Shaun Ruffell <sruffell at digium.com>
---
 system.conf.sample | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/system.conf.sample b/system.conf.sample
index c6efacf..f05ecb8 100644
--- a/system.conf.sample
+++ b/system.conf.sample
@@ -111,17 +111,6 @@
 #   Channel(s) are signalled using FXO Groundstart protocol.
 # fxoks:: 
 #   Channel(s) are signalled using FXO Koolstart protocol.
-# sf:: 
-#   Channel(s) are signalled using in-band single freq tone. 
-#   Syntax as follows: 
-#    
-#     channel# => sf:<rxfreq>,<rxbw>,<rxflag>,<txfreq>,<txlevel>,<txflag>
-#   
-#   rxfreq is rx tone freq in Hz, rxbw is rx notch (and decode)
-#   bandwith in hz (typically 10.0), rxflag is either 'normal' or
-#   'inverted', txfreq is tx tone freq in hz, txlevel is tx tone 
-#   level in dbm, txflag is either 'normal' or 'inverted'. Set 
-#   rxfreq or txfreq to 0.0 if that tone is not desired.
 #
 # unused:: 
 #   No signalling is performed, each channel in the list remains idle

-- 
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-voip/dahdi-tools.git