[pkg-wpa-devel] Bug#516970: Bug#516970: It also behaves equal with rt73.

[Xan]

En/na Kel Modderman ha escrit:
> On Monday 03 August 2009 08:51:30 Xan wrote:
>   
>> So, it seems it's a confirmed bug of wpasupplicant.
>> Please, fix it
>>
>> Xan.
>>
>> PS:
>>
>> The problem:
>>
>> # ifconfig wlan0 up
>> root at caixa:/var/log# ifup wlan0
>> Line 4: unknown network field 'ssid '.
>> Line 8: failed to parse network block.
>> Failed to read or parse configuration 
>> '/etc/wpa_supplicant/wpa_supplicant.conf'.
>> Failed to bring up wlan0.
>>
>>
>> and
>>
>>  cat /etc/network/interfaces
>> # This file describes the network interfaces available on your system
>> # and how to activate them. For more information, see interfaces(5).
>>
>> # The loopback network interface
>> auto lo
>> iface lo inet loopback
>>
>> # The primary network interface
>> allow-hotplug eth0
>> iface eth0 inet static
>>     address 172.26.0.2
>>     netmask 255.255.0.0
>>     network 172.26.0.0
>>     broadcast 172.26.255.255
>>     gateway 172.26.0.1
>>     # dns-* options are implemented by the resolvconf package, if installed
>>     dns-nameservers 80.58.61.250 80.58.61.254
>>     dns-search example.org
>>
>> # 2009-07. The secondary network interface
>>
>> allow-hotplug wlan0
>> iface wlan0 inet static
>>     address 172.26.0.3
>>     netmask 255.255.0.0
>>     network 172.26.0.0
>>     broadcast 172.26.255.255
>>     gateway 172.26.0.1
>>     # dns-* options are implemented by the resolvconf package, if installed
>>     dns-nameservers 80.58.61.250 80.58.61.254
>>     dns-search example.org
>>     wpa-ssid 314159
>>     wpa-driver wext
>>     wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
>>     #pre-up wpa_supplicant -Bw -Dwext -iethX -c/etc/wpa_supplicant.conf
>>     pre-up wpa_supplicant -D wext -B -i wlan0 -c 
>> /etc/wpa_supplicant/wpa_supplicant.conf
>>     post-down killall -q wpa_supplicant
>>
>>
>> and
>> # cat /etc/wpa_supplicant/wpa_supplicant.conf
>> ctrl_interface=/var/run/wpa_supplicant
>>
>> network={
>> ssid = "314159"
>>     
>
> This is wrong syntax, remove the whitespace around the = sign.
>
>   

Thanks a lot.
>> proto=WPA
>> key_mgmt=WPA-PSK
>> psk="enunlugardelamanchadecuyonombrenopuedoacordarme"
>> }
>>
>> Previously, I had not this problem with the same configuration files.
>>     
>
> I doubt it, maybe lucky because you seem to configure wpa_supplicant
> twice in /etc/network/interfaces (via pre-up and via wpa-* ifupdown hook).
>
> Thanks, Kel.
>   
Thanks, Kel.
Now I get this error:

# ifconfig wlan0 up
root at caixa:~# ifup wlan0
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1

What are the exactly steps I have to do with put up the wlan0? Perhaps a 
newbee question, but do I really duplicate steps?



Xan.