r456 - in zope-common/trunk/debian: . po
Fabio Tranchitella
kobold at alioth.debian.org
Thu Nov 9 19:40:23 CET 2006
Author: kobold
Date: 2006-11-09 19:40:23 +0100 (Thu, 09 Nov 2006)
New Revision: 456
Modified:
zope-common/trunk/debian/changelog
zope-common/trunk/debian/po/cs.po
zope-common/trunk/debian/po/da.po
zope-common/trunk/debian/po/de.po
zope-common/trunk/debian/po/fr.po
zope-common/trunk/debian/po/it.po
zope-common/trunk/debian/po/ja.po
zope-common/trunk/debian/po/nl.po
zope-common/trunk/debian/po/pt_BR.po
zope-common/trunk/debian/po/sv.po
zope-common/trunk/debian/po/templates.pot
zope-common/trunk/debian/po/vi.po
zope-common/trunk/debian/templates
Log:
i18n fixes.
Modified: zope-common/trunk/debian/changelog
===================================================================
--- zope-common/trunk/debian/changelog 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/changelog 2006-11-09 18:40:23 UTC (rev 456)
@@ -6,6 +6,7 @@
* debian/control: lsb-release and po-debconf should be in Build-Depends.
(Closes: #392653)
* debian/po/cs.po: updated. (Closes: #396759)
+ * debian/po/de.po: updated. (Closes: #397215)
* dzhandle: restart only running instances on upgrades.
(Closes: #388253, #378364)
* dzhandle: use atechnique from the instance if not specified on the
@@ -14,7 +15,7 @@
(Closes: #359256)
* debian/rules: mv dzhandle from /usr/sbin to /usr/bin. (Closes: #379169)
- -- Fabio Tranchitella <kobold at debian.org> Fri, 3 Nov 2006 20:35:19 +0100
+ -- Fabio Tranchitella <kobold at debian.org> Mon, 6 Nov 2006 08:49:48 +0100
zope-common (0.5.25) unstable; urgency=low
Modified: zope-common/trunk/debian/po/cs.po
===================================================================
--- zope-common/trunk/debian/po/cs.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/cs.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -239,7 +239,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
"Pro pÅihlášenà do instance ${instance} Zope${zver} použijte následujÃcà "
"údaje:"
Modified: zope-common/trunk/debian/po/da.po
===================================================================
--- zope-common/trunk/debian/po/da.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/da.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -238,7 +238,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr "Benyt disse værdier til at logge på Zope${zver}-instansen ${instance}:"
#. Type: note
Modified: zope-common/trunk/debian/po/de.po
===================================================================
--- zope-common/trunk/debian/po/de.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/de.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -1,4 +1,4 @@
-# translation of zope-common_0.5.17_de.po to German
+# translation of zope-common_0.5.26_de.po to German
#
# Translators, if you are not familiar with the PO format, gettext
# documentation is worth reading, especially sections dedicated to
@@ -9,22 +9,21 @@
# /usr/share/doc/po-debconf/README-trans
# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
# Developers do not need to manually edit POT or PO files.
-# Erik Schanze <mail at erikschanze.de>, 2004, 2005.
-# Erik Schanze <schanzi_ at gmx.de>, 2006.
#
+# Erik Schanze <eriks at debian.org>, 2004-2006.
msgid ""
msgstr ""
-"Project-Id-Version: zope-common_0.5.17_de\n"
+"Project-Id-Version: zope-common_0.5.26_de\n"
"Report-Msgid-Bugs-To: pkg-zope-developers at lists.alioth.debian.org\n"
"POT-Creation-Date: 2006-11-02 15:47+0100\n"
-"PO-Revision-Date: 2006-01-06 21:27+0100\n"
-"Last-Translator: Erik Schanze <schanzi_ at gmx.de>\n"
-"Language-Team: German <de at li.org>\n"
+"PO-Revision-Date: 2006-11-04 21:46+0100\n"
+"Last-Translator: Erik Schanze <eriks at debian.org>\n"
+"Language-Team: German <debian-l10n-german at lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: KBabel 1.10.2\n"
+"X-Generator: KBabel 1.11.4\n"
#. Type: select
#. Choices
@@ -36,7 +35,7 @@
#. Description
#: ../templates:1002
msgid "Automatic restart of Zope instances:"
-msgstr ""
+msgstr "Automatischer Neustart von Zope-Instanzen:"
#. Type: select
#. Description
@@ -50,14 +49,15 @@
"when Zope needs to be restarted. Each instance, however, is allowed to "
"overwrite this setting:"
msgstr ""
-"Zope hat einen erweiterbaren, modularen Aufbau, der es Ihnen einfach "
-"ermöglicht, zusätzliche Teile (Produkte) oder Funktionen hinzuzufügen. Jedes "
-"Produkt oder jede Funktion befindet sich normalerweise in Paketen, deren "
-"Name mit `zope-' beginnt. Leider muss jede Zope-Instanz neu gestartet "
-"werden, um die neuen Erweiterungen benutzen zu können. Hier können Sie eine "
-"Vorgabe machen, wie Zope-Instanzen von jeder installierten Zope-Version "
-"gestartet werden sollen. Trotzdem kann jede Instanz diese Einstellung "
-"ignorieren:"
+"Zope hat einen erweiterbaren, modularen Aufbau, der es Ihnen "
+"ermöglicht, auf einfache Weise zusätzliche Teile (Produkte) "
+"oder Funktionen hinzuzufügen. Jedes Produkt oder jede Funktion "
+"befindet sich normalerweise in Paketen, deren Name mit »zope-« "
+"beginnt. Leider muss jede Zope-Instanz neu gestartet werden, "
+"um die neuen Erweiterungen benutzen zu können. Hier können Sie "
+"vorgeben, wie sich Zope-Instanzen von jeder installierten "
+"Zope-Version verhalten sollen, wenn Zope neu gestartet werden muss. "
+"Trotzdem kann jede Instanz diese Einstellung ignorieren:"
#. Type: select
#. Description
@@ -85,9 +85,8 @@
#. Type: select
#. Description
#: ../templates:2002
-#, fuzzy
msgid "Found an old/incomplete zope instance '${instance}':"
-msgstr "Alte bzw. unvollständige Zope-Instanz '${instance}' gefunden"
+msgstr "Alte bzw. unvollständige Zope-Instanz »${instance}« gefunden:"
#. Type: select
#. Description
@@ -102,28 +101,27 @@
"logfiles in /var/log/zope${zver}/${instance} and configuration files in /etc/"
"zope${zver}/${instance} are preserved."
msgstr ""
-"Die alte bzw. unvollständige Instanz ${instance} wurde im Verzeichnis /var/"
-"lib/zope${zver}/instance/${instance} gefunden. Für diese Instanz wurde keine "
-"Datei Data.fs gefunden, d.h. die Installation wurde aus irgend einem Grund "
-"nicht beendet oder unvollständig gelöscht. \"Abbruch\" der Installation gibt "
-"Ihnen Gelegenheit, die Instanz zu untersuchen, wählen Sie \"löschen und "
-"weiter\" aus, wird /var/lib/zope${zver}/instance/${instance} gelöscht und "
-"${instance} neu installiert. In /var/log/zope${zver}/${instance} liegende "
-"Log-Dateien und Konfigurationsdateien in /etc/zope${zver}/${instance} "
-"bleiben erhalten."
+"Die alte bzw. unvollständige Instanz ${instance} wurde im "
+"Verzeichnis /var/lib/zope${zver}/instance/${instance} gefunden. "
+"Für diese Instanz wurde keine Datei Data.fs gefunden, d. h. die "
+"Installation wurde aus einem bestimmten Grund nicht beendet oder "
+"unvollständig gelöscht. »Abbruch« der Installation gibt Ihnen "
+"Gelegenheit, die Instanz zu untersuchen, wählen Sie »löschen und "
+"weiter« aus, wird /var/lib/zope${zver}/instance/${instance} "
+"gelöscht und ${instance} neu installiert. Vorhandene "
+"Protokolldateien in /var/log/zope${zver}/${instance} und "
+"Konfigurationsdateien in /etc/zope${zver}/${instance} bleiben "
+"erhalten."
#. Type: boolean
#. Description
#: ../templates:3001
-#, fuzzy
msgid "Keep data for ${instance} on package purge?"
-msgstr ""
-"Daten von ${instance} beim restlosen Löschen (purge) des Pakets behalten?"
+msgstr "Daten von ${instance} beim restlosen Löschen (purge) des Pakets behalten?"
#. Type: boolean
#. Description
#: ../templates:3001
-#, fuzzy
msgid ""
"Purging the data files of a zope instance on package purge results in loss "
"of all data of the zope instance. The data files for this instance are "
@@ -131,16 +129,14 @@
msgstr ""
"Werden die Daten-Dateien einer Zope-Instanz beim restlosen Entfernen des "
"Pakets gelöscht, bedeutet das den Verlust aller Daten dieser Zope-Instanz. "
-"Sollen die Daten-Dateien in /var/lib/zope${zver}/instance/${instance} statt "
-"dessen beim einfachen (remove) und restlosen (purge) Löschen des Pakets "
-"erhalten bleiben?"
+"Die Daten-Dateien dieser Instanz liegen im "
+"Verzeichnis /var/lib/zope${zver}/instance/${instance}."
#. Type: string
#. Description
#: ../templates:4001
-#, fuzzy
msgid "Admin user for zope instance '${instance}':"
-msgstr "Admin-Benutzer der Zope-Instanz '${instance}' eingeben:"
+msgstr "Admin-Benutzer der Zope-Instanz »${instance}«:"
#. Type: string
#. Description
@@ -149,9 +145,9 @@
"Please enter an admin user for the zope instance '${instance}'. A valid user "
"name starts with a letter, followed by letters and digits."
msgstr ""
-"Bitte geben Sie den Admin-Benutzer der Zope-Instanz '${instance}' ein. Ein "
-"gültiger Benutzername beginnt mit einem Buchstaben gefolgt von Buchstaben "
-"und Zahlen."
+"Bitte geben Sie den Admin-Benutzer der Zope-Instanz »${instance}« "
+"ein. Ein gültiger Benutzername beginnt mit einem Buchstaben, gefolgt "
+"von Buchstaben und Zahlen."
#. Type: string
#. Description
@@ -164,9 +160,10 @@
"NOTE: Once the instance has been created, the parameter entered here isn't "
"relevant anymore. To change the admin user (and password) later on, call:"
msgstr ""
-"ACHTUNG: Wenn die Instanz einmal erstellt ist, werden die hier eingegebenen "
-"Parameter nicht mehr benötigt. Um den Admin-Benutzer (und das Passwort) "
-"später zu ändern, rufen Sie folgendes Kommando auf:"
+"ACHTUNG: Wenn die Instanz einmal erstellt ist, werden die hier "
+"eingegebenen Parameter nicht mehr benötigt. Um den Admin-Benutzer "
+"(und das Passwort) später zu ändern, rufen Sie folgendes Kommando "
+"auf:"
#. Type: string
#. Description
@@ -185,9 +182,8 @@
#. Type: password
#. Description
#: ../templates:5001
-#, fuzzy
msgid "Password for the admin user:"
-msgstr "Passwort für Admin-Benutzer eingeben:"
+msgstr "Passwort für Admin-Benutzer:"
#. Type: password
#. Description
@@ -197,27 +193,26 @@
"The password is deleted from the configuration database, once the instance "
"is sucessfully created and cannot be recoverd."
msgstr ""
-"Bitte geben Sie ein Passwort für den Admin-Benutzer ein. Das Passwort darf "
-"nicht leer sein. Das Passwort wird nach erfolgreichem Erstellen der Instanz "
-"aus der Konfigurationsdatenbank gelöscht und kann nicht wieder hergestellt "
-"werden."
+"Bitte geben Sie ein Passwort für den Admin-Benutzer ein. Das "
+"Passwort darf nicht leer sein. Das Passwort wird nach erfolgreichem "
+"Erstellen der Instanz aus der Konfigurationsdatenbank gelöscht und "
+"kann nicht wieder hergestellt werden."
#. Type: password
#. Description
#: ../templates:6001
msgid "Same password:"
-msgstr ""
+msgstr "Passwort-Wiederholung:"
#. Type: password
#. Description
#: ../templates:6001
msgid "Please enter again the password for the admin user."
-msgstr "Bitte geben Sie das Passwort für den Admin-Benutzer nocheinmal ein."
+msgstr "Bitte geben Sie das Passwort für den Admin-Benutzer noch einmal ein."
#. Type: string
#. Description
#: ../templates:7001
-#, fuzzy
msgid "HTTP port for this instance:"
msgstr "HTTP-Port dieser Instanz:"
@@ -234,9 +229,9 @@
"Other services (e.g. FTP, WebDAV, debug) will be disabled by default. You "
"can enable them editing /etc/zope${zver}/${instance}/zope.conf."
msgstr ""
-"Andere Dienste (z. B. FTP, WebDAV, debug) werden standardmäÃig deaktiviert. "
-"Sie können sie in der Datei /etc/zope${zver}/${instance}/zope.conf "
-"aktivieren."
+"Andere Dienste (z. B. FTP, WebDAV, debug) werden standardmäÃig "
+"deaktiviert. Sie können sie in der "
+"Datei /etc/zope${zver}/${instance}/zope.conf aktivieren."
#. Type: note
#. Description
@@ -251,13 +246,13 @@
"You haven't provided a user and a password for your instance, so these "
"values have been automatically generated."
msgstr ""
-"Sie haben keinen Benutzernamen und Passwort für Ihre Instanz angegeben, "
-"daher werden diese Werte automatisch erstellt."
+"Sie haben keinen Benutzernamen und Passwort für Ihre Instanz "
+"eingegeben, deshalb wurden diese Werte automatisch erstellt."
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
"Benutzen Sie diese Angaben zum Anmelden an der Zope${zver}-Instanz "
"${instance}:"
@@ -269,11 +264,6 @@
" * User : ${user}\n"
" * Password : ${password}"
msgstr ""
-" * Benutzername : ${user}\n"
-" * Passwort : ${password}"
+" * Benutzername: ${user}\n"
+" * Passwort : ${password}"
-#~ msgid "When will Zope instances be restarted?"
-#~ msgstr "Wann sollen Zope-Instanzen neu gestartet werden?"
-
-#~ msgid "Enter again the same password:"
-#~ msgstr "Das gleiche Passwort nocheinmal eingeben:"
Modified: zope-common/trunk/debian/po/fr.po
===================================================================
--- zope-common/trunk/debian/po/fr.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/fr.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -13,10 +13,10 @@
#
msgid ""
msgstr ""
-"Project-Id-Version: zope-0.5.10\n"
+"Project-Id-Version: zope-common_0.5.25\n"
"Report-Msgid-Bugs-To: pkg-zope-developers at lists.alioth.debian.org\n"
"POT-Creation-Date: 2006-11-02 15:47+0100\n"
-"PO-Revision-Date: 2005-11-08 22:09+0100\n"
+"PO-Revision-Date: 2006-11-05 10:47+0100\n"
"Last-Translator: Michel Grentzinger <mic.grentz at online.fr>\n"
"Language-Team: French <debian-l10n-french at lists.debian.org>\n"
"MIME-Version: 1.0\n"
@@ -33,7 +33,7 @@
#. Description
#: ../templates:1002
msgid "Automatic restart of Zope instances:"
-msgstr ""
+msgstr "Méthode de redémarrage des instances Zope :"
#. Type: select
#. Description
@@ -82,7 +82,6 @@
#. Type: select
#. Description
#: ../templates:2002
-#, fuzzy
msgid "Found an old/incomplete zope instance '${instance}':"
msgstr "Instance Zope « ${instance} » ancienne ou incomplète"
@@ -112,30 +111,27 @@
#. Type: boolean
#. Description
#: ../templates:3001
-#, fuzzy
msgid "Keep data for ${instance} on package purge?"
msgstr ""
-"Conserver les données de l'instance « ${instance} » lors de la purge du "
-"paquet ?"
+"Faut-il conserver les données de l'instance « ${instance} » lors de la purge "
+"du paquet ?"
#. Type: boolean
#. Description
#: ../templates:3001
-#, fuzzy
msgid ""
"Purging the data files of a zope instance on package purge results in loss "
"of all data of the zope instance. The data files for this instance are "
"stored in /var/lib/zope${zver}/instance/${instance}."
msgstr ""
"La suppression définitive des fichiers de données d'une instance Zope "
-"conduira à la perte de toutes les données de cette instance. Veuillez "
-"confirmer si vous souhaitez conserver les fichiers de données dans /var/log/"
-"zope${zver}/${instance} lors de la suppression complète du paquet."
+"conduira à la perte de toutes les données de cette instance. Les fichiers de "
+"données de cette instance sont stockés dans /var/lib/zope${zver}/instance/"
+"${instance}."
#. Type: string
#. Description
#: ../templates:4001
-#, fuzzy
msgid "Admin user for zope instance '${instance}':"
msgstr "Administrateur de l'instance « ${instance} » :"
@@ -182,7 +178,6 @@
#. Type: password
#. Description
#: ../templates:5001
-#, fuzzy
msgid "Password for the admin user:"
msgstr "Mot de passe de l'administrateur :"
@@ -202,7 +197,7 @@
#. Description
#: ../templates:6001
msgid "Same password:"
-msgstr ""
+msgstr "Mot de passe de l'administrateur :"
#. Type: password
#. Description
@@ -213,7 +208,6 @@
#. Type: string
#. Description
#: ../templates:7001
-#, fuzzy
msgid "HTTP port for this instance:"
msgstr "Port HTTP pour cette instance :"
@@ -252,7 +246,8 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+#, fuzzy
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
"Utilisez ces valeurs pour vous connecter à l'instance « ${instance} » de Zope"
"${zver} :"
Modified: zope-common/trunk/debian/po/it.po
===================================================================
--- zope-common/trunk/debian/po/it.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/it.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -245,7 +245,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
"Utilizzare questi valori per accedere all'istanza Zope${zver} ${instance}:"
Modified: zope-common/trunk/debian/po/ja.po
===================================================================
--- zope-common/trunk/debian/po/ja.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/ja.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -240,7 +240,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
#. Type: note
Modified: zope-common/trunk/debian/po/nl.po
===================================================================
--- zope-common/trunk/debian/po/nl.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/nl.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -254,7 +254,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
"Gebruik deze waarden om toegang te krijgen tot de Zope${zver}-dienst "
"${instance}:"
Modified: zope-common/trunk/debian/po/pt_BR.po
===================================================================
--- zope-common/trunk/debian/po/pt_BR.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/pt_BR.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -246,7 +246,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
#. Type: note
Modified: zope-common/trunk/debian/po/sv.po
===================================================================
--- zope-common/trunk/debian/po/sv.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/sv.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -179,7 +179,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr "Använd dessa värden för att logga in i Zope${zver}-instansen ${instance}:"
#. Type: note
Modified: zope-common/trunk/debian/po/templates.pot
===================================================================
--- zope-common/trunk/debian/po/templates.pot 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/templates.pot 2006-11-09 18:40:23 UTC (rev 456)
@@ -195,7 +195,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
#. Type: note
Modified: zope-common/trunk/debian/po/vi.po
===================================================================
--- zope-common/trunk/debian/po/vi.po 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/po/vi.po 2006-11-09 18:40:23 UTC (rev 456)
@@ -214,7 +214,7 @@
#. Type: note
#. Description
#: ../templates:8001
-msgid "Use these values to log in in to the Zope${zver} instance ${instance}:"
+msgid "Use these values to log into the Zope${zver} instance ${instance}:"
msgstr ""
#. Type: note
Modified: zope-common/trunk/debian/templates
===================================================================
--- zope-common/trunk/debian/templates 2006-11-09 10:55:29 UTC (rev 455)
+++ zope-common/trunk/debian/templates 2006-11-09 18:40:23 UTC (rev 456)
@@ -94,7 +94,7 @@
You haven't provided a user and a password for your instance, so these
values have been automatically generated.
.
- Use these values to log in in to the Zope${zver} instance ${instance}:
+ Use these values to log into the Zope${zver} instance ${instance}:
.
* User : ${user}
* Password : ${password}
More information about the pkg-zope-commits
mailing list