[Virtual-pkg-base-maintainers] Bug#773730: base: Broadcom card-reader BCM57765/BCM57785 not working
Mark NoSpam
2460acc at gmail.com
Wed Dec 24 15:26:48 UTC 2014
Hi T,
I did try the ideas in [1] with similar results - i.e. the card is not
automatically detected or mounted.
Can you tell me how to check for tg3 module?
Lastly, here is the dmesg output from boot with the SDHC card
inserted. I ejected and reinserted the card at >466 but it did not
create any messages.
Cokes
[ 0.000000] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64
(debian-kernel at lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-16)
) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=e62a123d-2aeb-45d4-a8e5-26db09151af1 ro
acpi_backlight=vendor quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a6abefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer V5-131/Mimic , BIOS V1.09 10/30/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0A7000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 140000000 mask FF0000000 write-back
[ 0.000000] 8 base 14F600000 mask FFFE00000 uncachable
[ 0.000000] 9 base 14F800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xa6abefff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xa69fffff] page 2M
[ 0.000000] [mem 0xa6a00000-0xa6abefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff]
[ 0.000000] [mem 0xa6fff000-0xa6ffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x362ec000-0x3716dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000A6FFE210 00008C (v01 ACRSYS
ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000A6FFB000 0000F4 (v04 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x00000000A6FEC000 00B903 (v01 ACRSYS
ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x00000000A6FBB000 000040
[ 0.000000] ACPI: UEFI 0x00000000A6FFD000 000236 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 0x00000000A6FFC000 0000A5 (v32 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x00000000A6FFA000 000038 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x00000000A6FF9000 00008C (v02 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x00000000A6FF8000 00003C (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 0x00000000A6FEB000 000176 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000A6FEA000 0006FE (v01 ACRSYS
ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x00000000A6FE8000 000028 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x00000000A6FE3000 000034 (v07 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x00000000A6FE1000 000044 (v01 ACRSYS
ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000A6FE0000 00079A (v01 ACRSYS
ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000A6FDF000 000A92 (v01 ACRSYS
ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[ 0.000000] NODE_DATA [mem 0x14f5f7000-0x14f5fbfff]
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD ->
[ffff88014ae00000-ffff88014e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa6abefff]
[ 0.000000] node 0: [mem 0xa6fff000-0xa6ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
[ 0.000000] On node 0 totalpages: 1007195
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9271 pages used for memmap
[ 0.000000] DMA32 zone: 678079 pages, LIFO batch:31
[ 0.000000] Normal zone: 4445 pages used for memmap
[ 0.000000] Normal zone: 325120 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xa7a00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa6abf000-0xa6ebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffc7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc80000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014f200000 s81792
r8192 d20608 u262144
[ 0.000000] pcpu-alloc: s81792 r8192 d20608 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 993402
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=e62a123d-2aeb-45d4-a8e5-26db09151af1 ro
acpi_backlight=vendor quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3878060K/4028780K available (5192K kernel code,
942K rwdata, 1828K rodata, 1200K init, 840K bss, 150720K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1496.692 MHz processor
[ 0.000052] Calibrating delay loop (skipped), value calculated
using timer frequency.. 2993.38 BogoMIPS (lpj=5986768)
[ 0.000056] pid_max: default: 32768 minimum: 301
[ 0.000068] ACPI: Core revision 20140424
[ 0.011596] ACPI: All ACPI Tables successfully acquired
[ 0.029262] Security Framework initialized
[ 0.029272] AppArmor: AppArmor disabled by boot time parameter
[ 0.029274] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.029653] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.031305] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.032059] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.032067] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.032375] Initializing cgroup subsys memory
[ 0.032382] Initializing cgroup subsys devices
[ 0.032391] Initializing cgroup subsys freezer
[ 0.032394] Initializing cgroup subsys net_cls
[ 0.032400] Initializing cgroup subsys blkio
[ 0.032405] Initializing cgroup subsys perf_event
[ 0.032408] Initializing cgroup subsys net_prio
[ 0.032443] CPU: Physical Processor ID: 0
[ 0.032445] CPU: Processor Core ID: 0
[ 0.032451] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032456] mce: CPU supports 7 MCE banks
[ 0.032474] CPU0: Thermal monitoring enabled (TM1)
[ 0.032488] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.032656] Freeing SMP alternatives memory: 20K (ffffffff81a19000
- ffffffff81a1e000)
[ 0.034226] ftrace: allocating 21561 entries in 85 pages
[ 0.048986] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088663] smpboot: CPU0: Intel(R) Celeron(R) CPU 1007U @ 1.50GHz
(fam: 06, model: 3a, stepping: 09)
[ 0.088673] TSC deadline timer enabled
[ 0.088711] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge
events, full-width counters, Intel PMU driver.
[ 0.088742] ... version: 3
[ 0.088743] ... bit width: 48
[ 0.088744] ... generic registers: 8
[ 0.088746] ... value mask: 0000ffffffffffff
[ 0.088747] ... max period: 0000ffffffffffff
[ 0.088748] ... fixed-purpose events: 3
[ 0.088750] ... event mask: 00000007000000ff
[ 0.090999] x86: Booting SMP configuration:
[ 0.091002] .... node #0, CPUs: #1
[ 0.101756] CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.104059] x86: Booted up 1 node, 2 CPUs
[ 0.104064] smpboot: Total of 2 processors activated (5986.76 BogoMIPS)
[ 0.104193] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.105924] devtmpfs: initialized
[ 0.109998] PM: Registering ACPI NVS region [mem
0xa6ebf000-0xa6fbefff] (1048576 bytes)
[ 0.111316] pinctrl core: initialized pinctrl subsystem
[ 0.111433] NET: Registered protocol family 16
[ 0.111616] cpuidle: using governor ladder
[ 0.111620] cpuidle: using governor menu
[ 0.111682] ACPI FADT declares the system doesn't support PCIe
ASPM, so disable it
[ 0.111685] ACPI: bus type PCI registered
[ 0.111687] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.111814] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.111818] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.112283] PCI: Using configuration type 1 for base access
[ 0.124633] ACPI: Added _OSI(Module Device)
[ 0.124636] ACPI: Added _OSI(Processor Device)
[ 0.124638] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.124639] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.128329] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.141875] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.142428] ACPI: Dynamic OEM Table Load:
[ 0.142441] ACPI: SSDT 0xFFFF88014A264000 00083B (v01 PmRef
Cpu0Cst 00003001 INTL 20100121)
[ 0.152438] ACPI: Dynamic OEM Table Load:
[ 0.152449] ACPI: SSDT 0xFFFF88014A26D400 000303 (v01 PmRef ApIst
00003000 INTL 20100121)
[ 0.161858] ACPI: Dynamic OEM Table Load:
[ 0.161866] ACPI: SSDT 0xFFFF88014E806000 000119 (v01 PmRef ApCst
00003000 INTL 20100121)
[ 0.172536] ACPI: Interpreter enabled
[ 0.172545] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1_] (20140424/hwxface-580)
[ 0.172551] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20140424/hwxface-580)
[ 0.172572] ACPI: (supports S0 S3 S4 S5)
[ 0.172574] ACPI: Using IOAPIC for interrupt routing
[ 0.172615] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.333906] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.333914] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.334020] \_SB_.PCI0:_OSC invalid UUID
[ 0.334022] _OSC request data:1 1f 0
[ 0.334027] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.335045] PCI host bridge to bus 0000:00
[ 0.335049] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.335052] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.335055] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.335057] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.335060] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 0.335071] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.335199] pci 0000:00:02.0: [8086:0156] type 00 class 0x030000
[ 0.335216] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.335224] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff
64bit pref]
[ 0.335230] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.335398] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.335433] pci 0000:00:16.0: reg 0x10: [mem 0xc0604000-0xc060400f 64bit]
[ 0.335539] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.335675] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.335971] pci 0000:00:1a.0: reg 0x10: [mem 0xc0609000-0xc06093ff]
[ 0.337594] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.337676] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.337745] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.337774] pci 0000:00:1b.0: reg 0x10: [mem 0xc0600000-0xc0603fff 64bit]
[ 0.337889] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.337951] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.338013] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.338143] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.338209] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.338270] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.338391] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.338454] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.338517] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.338643] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.338705] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.338780] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.339060] pci 0000:00:1d.0: reg 0x10: [mem 0xc0608000-0xc06083ff]
[ 0.340686] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.340765] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.340829] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[ 0.341073] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.341103] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
[ 0.341118] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
[ 0.341132] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
[ 0.341145] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
[ 0.341160] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 0.341174] pci 0000:00:1f.2: reg 0x24: [mem 0xc0607000-0xc06077ff]
[ 0.341247] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.341355] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.341381] pci 0000:00:1f.3: reg 0x10: [mem 0xc0605000-0xc06050ff 64bit]
[ 0.341417] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.341633] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.341765] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[ 0.341804] pci 0000:03:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit]
[ 0.341885] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.341984] pci 0000:03:00.0: supports D1 D2
[ 0.341986] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.342027] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.352286] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.352295] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.352476] pci 0000:04:00.0: [14e4:16b5] type 00 class 0x020000
[ 0.352518] pci 0000:04:00.0: reg 0x10: [mem 0xc0410000-0xc041ffff
64bit pref]
[ 0.352547] pci 0000:04:00.0: reg 0x18: [mem 0xc0420000-0xc042ffff
64bit pref]
[ 0.352602] pci 0000:04:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[ 0.352750] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.352807] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.352921] pci 0000:04:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.352963] pci 0000:04:00.1: reg 0x10: [mem 0xc0400000-0xc040ffff
64bit pref]
[ 0.353176] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[ 0.360373] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.360388] pci 0000:00:1c.2: bridge window [mem
0xc0400000-0xc04fffff 64bit pref]
[ 0.432680] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11
12 14 15) *7
[ 0.432756] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.432828] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.432898] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.432967] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11
12 14 15) *0, disabled.
[ 0.433037] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.433106] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.433174] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11
12 14 15) *7
[ 0.433278] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.433327] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.433483] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.433485] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.433489] vgaarb: loaded
[ 0.433491] vgaarb: bridge control possible 0000:00:02.0
[ 0.433571] PCI: Using ACPI for IRQ routing
[ 0.441561] PCI: pci_cache_line_size set to 64 bytes
[ 0.441706] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.441708] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.441710] e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff]
[ 0.441712] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[ 0.441714] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[ 0.441926] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.441933] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.443966] Switched to clocksource hpet
[ 0.450860] pnp: PnP ACPI init
[ 0.450883] ACPI: bus type PNP registered
[ 0.450982] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.451100] pnp 00:01: Plug and Play ACPI device, IDs ETD0502
PNP0f13 (active)
[ 0.451266] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.451269] system 00:02: [io 0xfd60-0xfd63] has been reserved
[ 0.451272] system 00:02: [io 0x1000-0x100f] has been reserved
[ 0.451275] system 00:02: [io 0xffff] has been reserved
[ 0.451277] system 00:02: [io 0xffff] has been reserved
[ 0.451280] system 00:02: [io 0x0400-0x0453] could not be reserved
[ 0.451283] system 00:02: [io 0x0458-0x047f] has been reserved
[ 0.451286] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.451288] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.451292] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.451333] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.451405] system 00:04: [io 0x0454-0x0457] has been reserved
[ 0.451409] system 00:04: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.520176] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.520179] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.520182] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.520185] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.520187] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.520190] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.520193] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.520196] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.520199] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.520202] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.520204] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.520207] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.520550] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.520553] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 0.520556] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.520577] pnp: PnP ACPI: found 7 devices
[ 0.520578] ACPI: bus type PNP unregistered
[ 0.527885] pci 0000:03:00.0: can't claim BAR 6 [mem
0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.527889] pci 0000:04:00.0: can't claim BAR 6 [mem
0xfffff800-0xffffffff pref]: no compatible bridge window
[ 0.527907] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to
[bus 02] add_size 1000
[ 0.527911] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.527914] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.527950] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff]
get_res_add_size add_size 200000
[ 0.527953] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] get_res_add_size add_size 200000
[ 0.527955] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff]
get_res_add_size add_size 1000
[ 0.527961] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafcfffff]
[ 0.527968] pci 0000:00:1c.0: BAR 15: assigned [mem
0xafd00000-0xafefffff 64bit pref]
[ 0.527971] pci 0000:00:1c.2: BAR 14: assigned [mem 0xaff00000-0xafffffff]
[ 0.527975] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.527978] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.527983] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.527991] pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafcfffff]
[ 0.527998] pci 0000:00:1c.0: bridge window [mem
0xafd00000-0xafefffff 64bit pref]
[ 0.528009] pci 0000:03:00.0: BAR 6: assigned [mem
0xc0580000-0xc058ffff pref]
[ 0.528012] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.528019] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.528035] pci 0000:04:00.0: BAR 6: assigned [mem
0xaff00000-0xaff007ff pref]
[ 0.528037] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.528044] pci 0000:00:1c.2: bridge window [mem 0xaff00000-0xafffffff]
[ 0.528050] pci 0000:00:1c.2: bridge window [mem
0xc0400000-0xc04fffff 64bit pref]
[ 0.528060] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.528062] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.528064] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.528067] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[ 0.528069] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.528072] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafcfffff]
[ 0.528074] pci_bus 0000:02: resource 2 [mem 0xafd00000-0xafefffff
64bit pref]
[ 0.528077] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.528080] pci_bus 0000:04: resource 1 [mem 0xaff00000-0xafffffff]
[ 0.528082] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc04fffff
64bit pref]
[ 0.528147] NET: Registered protocol family 2
[ 0.528431] TCP established hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.528546] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.528639] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.528665] TCP: reno registered
[ 0.528676] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.528698] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.528799] NET: Registered protocol family 1
[ 0.528819] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.560122] PCI: CLS 64 bytes, default 64
[ 0.560186] Unpacking initramfs...
[ 0.968228] Freeing initrd memory: 14856K (ffff8800362ec000 -
ffff88003716e000)
[ 0.968276] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.968280] software IO TLB [mem 0xa2abf000-0xa6abf000] (64MB)
mapped at [ffff8800a2abf000-ffff8800a6abefff]
[ 0.968332] Simple Boot Flag at 0x44 set to 0x1
[ 0.968569] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.968619] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.968630] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.968706] microcode: Microcode Update Driver: v2.00
<tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.969181] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.969240] audit: initializing netlink subsys (disabled)
[ 0.969266] audit: type=2000 audit(1419431840.952:1): initialized
[ 0.969795] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.969825] zbud: loaded
[ 0.970065] VFS: Disk quotas dquot_6.5.2
[ 0.970086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.970155] msgmni has been set to 7603
[ 0.970576] alg: No test for stdrng (krng)
[ 0.970611] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 252)
[ 0.970668] io scheduler noop registered
[ 0.970674] io scheduler deadline registered
[ 0.970723] io scheduler cfq registered (default)
[ 0.971355] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.971378] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.971441] intel_idle: MWAIT substates: 0x21120
[ 0.971443] intel_idle: v0.4 model 0x3A
[ 0.971445] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.971615] GHES: HEST is not enabled!
[ 0.971718] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.972350] Linux agpgart interface v0.103
[ 0.972503] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0]
at 0x60,0x64 irq 1,12
[ 0.984196] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.984203] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.984440] mousedev: PS/2 mouse device common for all mice
[ 0.985437] rtc_cmos 00:03: RTC can wake from S4
[ 0.985624] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.985656] rtc_cmos 00:03: alarms up to one month, 242 bytes
nvram, hpet irqs
[ 0.985670] Intel P-state driver initializing.
[ 0.985711] Intel pstate controlling: cpu 0
[ 0.985736] Intel pstate controlling: cpu 1
[ 0.985812] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.986293] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel at amd.com>
[ 0.986296] AMD IOMMUv2 functionality not available on this system
[ 0.986533] TCP: cubic registered
[ 0.986695] NET: Registered protocol family 10
[ 0.987201] mip6: Mobile IPv6
[ 0.987213] NET: Registered protocol family 17
[ 0.987227] mpls_gso: MPLS GSO support
[ 0.987901] registered taskstats version 1
[ 0.988850] rtc_cmos 00:03: setting system clock to 2014-12-24
14:37:21 UTC (1419431841)
[ 0.989075] PM: Hibernation image not present or could not be loaded.
[ 0.991001] Freeing unused kernel memory: 1200K (ffffffff818ed000 -
ffffffff81a19000)
[ 0.991005] Write protecting the kernel read-only data: 8192k
[ 0.994428] Freeing unused kernel memory: 940K (ffff880001515000 -
ffff880001600000)
[ 0.995138] Freeing unused kernel memory: 220K (ffff8800017c9000 -
ffff880001800000)
[ 0.999335] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.014847] systemd-udevd[59]: starting version 215
[ 1.015273] random: systemd-udevd urandom read with 2 bits of
entropy available
[ 1.027083] ACPI: bus type USB registered
[ 1.027119] usbcore: registered new interface driver usbfs
[ 1.027135] usbcore: registered new interface driver hub
[ 1.029067] pps_core: LinuxPPS API ver. 1 registered
[ 1.029070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti at linux.it>
[ 1.029303] PTP clock support registered
[ 1.030090] tg3.c:v3.137 (May 11, 2014)
[ 1.035884] sdhci: Secure Digital Host Controller Interface driver
[ 1.035888] sdhci: Copyright(c) Pierre Ossman
[ 1.036244] usbcore: registered new device driver usb
[ 1.036769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.036973] ehci-pci: EHCI PCI platform driver
[ 1.037318] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.037327] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 1.037348] ehci-pci 0000:00:1a.0: debug port 2
[ 1.041269] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.041615] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0609000
[ 1.051468] SCSI subsystem initialized
[ 1.063405] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev
57785100] (PCI Express) MAC address 20:89:84:cb:42:41
[ 1.063411] tg3 0000:04:00.0 eth0: attached PHY is 57765
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 1.063414] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] TSOcap[1]
[ 1.063416] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 1.063813] libata version 3.00 loaded.
[ 1.066786] sdhci-pci 0000:04:00.1: SDHCI controller found
[14e4:16bc] (rev 10)
[ 1.067037] mmc0: no vqmmc regulator found
[ 1.067040] mmc0: no vmmc regulator found
[ 1.067849] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.067904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.067907] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.067910] usb usb1: Product: EHCI Host Controller
[ 1.067912] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.067915] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.069134] hub 1-0:1.0: USB hub found
[ 1.069145] hub 1-0:1.0: 2 ports detected
[ 1.071029] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.071038] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.071056] ehci-pci 0000:00:1d.0: debug port 2
[ 1.074977] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.075289] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA
[ 1.075586] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0608000
[ 1.083795] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.083909] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.083914] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.083917] usb usb2: Product: EHCI Host Controller
[ 1.083919] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.083921] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.084175] hub 2-0:1.0: USB hub found
[ 1.084187] hub 2-0:1.0: 2 ports detected
[ 1.084450] ahci 0000:00:1f.2: version 3.0
[ 1.084645] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.084675] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.084701] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6
Gbps 0x1 impl SATA mode
[ 1.084705] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio
slum part ems apst
[ 1.085297] scsi0 : ahci
[ 1.085473] scsi1 : ahci
[ 1.085631] scsi2 : ahci
[ 1.085758] scsi3 : ahci
[ 1.085822] ata1: SATA max UDMA/133 abar m2048 at 0xc0607000 port
0xc0607100 irq 40
[ 1.085824] ata2: DUMMY
[ 1.085826] ata3: DUMMY
[ 1.085827] ata4: DUMMY
[ 1.379825] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.403781] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.404819] ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[ 1.404829] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.405892] ata1.00: configured for UDMA/133
[ 1.406354] scsi 0:0:0:0: Direct-Access ATA WDC
WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[ 1.412938] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[ 1.412945] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.413082] sd 0:0:0:0: [sda] Write Protect is off
[ 1.413090] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.413156] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.502424] sda: sda4 < sda5 sda6 sda7 >
[ 1.504276] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.505528] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.512054] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.512062] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.512526] hub 1-1:1.0: USB hub found
[ 1.512645] hub 1-1:1.0: 4 ports detected
[ 1.623652] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.756416] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.756426] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.756992] hub 2-1:1.0: USB hub found
[ 1.757078] hub 2-1:1.0: 4 ports detected
[ 1.827679] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.906141] PM: Starting manual resume from disk
[ 1.906151] PM: Hibernation image partition 8:6 present
[ 1.906153] PM: Looking for hibernation image.
[ 1.906407] PM: Image not found (code -22)
[ 1.906412] PM: Hibernation image not present or could not be loaded.
[ 1.921643] usb 1-1.1: string descriptor 0 read error: -22
[ 1.921709] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
[ 1.921713] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.950285] EXT4-fs (sda5): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.967594] tsc: Refined TSC clocksource calibration: 1496.601 MHz
[ 1.991818] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.138134] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2c17
[ 2.138142] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.138146] usb 1-1.3: Product: HD WebCam
[ 2.138149] usb 1-1.3: Manufacturer: SunplusIT INC.
[ 2.700418] systemd[1]: RTC configured in localtime, applying delta
of 60 minutes to system time.
[ 2.967435] Switched to clocksource tsc
[ 3.092160] random: nonblocking pool is initialized
[ 3.290540] systemd-default-display-manager-generator[134]:
/lib/systemd/system/xdm.service doesn't seem to be a system unit, we
disable the systemd enabled display manager
[ 5.949461] lp: driver loaded but no devices found
[ 5.961041] ppdev: user-space parallel port driver
[ 6.131069] fuse init (API version 7.23)
[ 6.200416] systemd-udevd[162]: starting version 215
[ 8.610053] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[ 8.610061] ACPI: Power Button [PWRB]
[ 8.610138] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
[ 8.610188] ACPI: Lid Switch [LID0]
[ 8.610254] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4
[ 8.610258] ACPI: Sleep Button [SLPB]
[ 8.610331] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.610334] ACPI: Power Button [PWRF]
[ 8.624905] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.649937] wmi: Mapper loaded
[ 8.833370] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042f conflicts with OpRegion
0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[ 8.833380] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 8.833385] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 8.833389] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 8.833391] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 8.833394] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 8.833396] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 8.833399] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 8.833401] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.892716] [drm] Initialized drm 1.1.0 20060810
[ 8.962978] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
[ 9.044092] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 9.101328] ACPI: Battery Slot [BAT1] (battery present)
[ 9.101516] ACPI: AC Adapter [ACAD] (off-line)
[ 9.144404] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 9.214540] cfg80211: Calling CRDA to update world regulatory domain
[ 9.281081] ACPI Warning: SystemIO range
0x0000000000002040-0x000000000000205f conflicts with OpRegion
0x0000000000002040-0x000000000000204f (\_SB_.PCI0.SBUS.SMBI)
(20140424/utaddress-258)
[ 9.281090] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 9.284227] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.453017] ath: phy0: ASPM enabled: 0x42
[ 9.453024] ath: EEPROM regdomain: 0x6c
[ 9.453027] ath: EEPROM indicates we should expect a direct regpair map
[ 9.453031] ath: Country alpha2 being used: 00
[ 9.453033] ath: Regpair used: 0x6c
[ 9.526124] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.526430] ieee80211 phy0: Atheros AR9462 Rev:2
mem=0xffffc90010a80000, irq=17
[ 9.530073] alg: No test for crc32 (crc32-pclmul)
[ 9.674993] media: Linux media interface: v0.10
[ 9.695924] Linux video capture interface: v2.00
[ 9.779484] intel_rapl: RAPL domain dram detection failed
[ 9.824680] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c17)
[ 9.833625] input: HD WebCam as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8
[ 9.833706] usbcore: registered new interface driver uvcvideo
[ 9.833709] USB Video Class driver (1.1.1)
[ 10.024549] psmouse serio1: elantech: assuming hardware version 4
(with firmware version 0x461f02)
[ 10.047277] psmouse serio1: elantech: Synaptics capabilities query
result 0x01, 0x16, 0x0c.
[ 10.070631] sound hdaudioC0D0: autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.070640] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.070644] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.070647] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.070650] sound hdaudioC0D0: inputs:
[ 10.070654] sound hdaudioC0D0: Internal Mic=0x1b
[ 10.070658] sound hdaudioC0D0: Mic=0x19
[ 10.165239] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input6
[ 10.166965] iTCO_vendor_support: vendor-support=0
[ 10.170456] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 10.170476] acer_wmi: Function bitmap for Communication Button: 0x801
[ 10.170647] acer_wmi: Disabling ACPI video driver
[ 10.189232] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.189276] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 10.189409] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.214841] input: Acer WMI hotkeys as /devices/virtual/input/input10
[ 10.215226] input: Acer BMA150 accelerometer as
/devices/virtual/input/input11
[ 10.334254] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 10.337835] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.337959] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.338068] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 10.419760] [drm] Memory usable by graphics device = 2048M
[ 10.419766] [drm] Replacing VGA console driver
[ 10.420727] Bluetooth: Core ver 2.19
[ 10.420743] NET: Registered protocol family 31
[ 10.420744] Bluetooth: HCI device and connection manager initialized
[ 10.420752] Bluetooth: HCI socket layer initialized
[ 10.420754] Bluetooth: L2CAP socket layer initialized
[ 10.420766] Bluetooth: SCO socket layer initialized
[ 10.420900] Console: switching to colour dummy device 80x25
[ 10.444929] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 10.444951] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.444954] [drm] Driver supports precise vblank timestamp query.
[ 10.445073] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.469080] [drm] Wrong MCH_SSKPD value: 0x20100406
[ 10.469085] [drm] This can cause pipe underruns and display issues.
[ 10.469087] [drm] Please upgrade your BIOS to fix this.
[ 10.486669] fbcon: inteldrmfb (fb0) is primary device
[ 10.800202] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared
pch fifo underrun on pch transcoder A
[ 10.800204] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[ 10.899153] usbcore: registered new interface driver btusb
[ 10.925548] usb 1-1.1: firmware: failed to load
ar3k/AthrBT_0x11020000.dfu (-2)
[ 10.925551] usb 1-1.1: Direct firmware load failed with error -2
[ 10.925553] usb 1-1.1: Falling back to user helper
[ 10.926566] Bluetooth: Loading patch file failed
[ 10.926573] ath3k: probe of 1-1.1:1.0 failed with error -12
[ 10.926617] usbcore: registered new interface driver ath3k
[ 11.173301] Console: switching to colour frame buffer device 170x48
[ 11.180228] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 11.180232] i915 0000:00:02.0: registered panic notifier
[ 11.210131] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.210376] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 11.210574] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.828932] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 11.853676] cfg80211: World regulatory domain updated:
[ 11.853685] cfg80211: DFS Master region: unset
[ 11.853688] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.853693] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 11.853697] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 11.853701] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 11.853704] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (N/A)
[ 11.853708] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 11.853712] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 11.853715] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 11.853719] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000
KHz), (N/A, 0 mBm), (N/A)
[ 11.905282] Adding 8054780k swap on /dev/sda6. Priority:-1
extents:1 across:8054780k FS
[ 12.290196] EXT4-fs (sda7): mounted filesystem with ordered data
mode. Opts: errors=remount-ro
[ 12.299609] systemd-journald[147]: Received request to flush
runtime journal from PID 1
[ 13.724131] RPC: Registered named UNIX socket transport module.
[ 13.724137] RPC: Registered udp transport module.
[ 13.724139] RPC: Registered tcp transport module.
[ 13.724141] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.753268] FS-Cache: Loaded
[ 13.802381] FS-Cache: Netfs 'nfs' registered for caching
[ 13.876343] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 19.237994] mmc0: Timeout waiting for hardware interrupt.
[ 25.429700] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[ 25.429717] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[ 25.429726] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[ 25.997344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.012829] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.553477] wlan0: authenticate with e2:2e:ea:f6:f1:9c
[ 30.559525] wlan0: send auth to e2:2e:ea:f6:f1:9c (try 1/3)
[ 30.561691] wlan0: authenticated
[ 30.561862] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 30.561866] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is
not supported by the AP
[ 30.561869] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is
not supported by the AP
[ 30.562736] wlan0: associate with e2:2e:ea:f6:f1:9c (try 1/3)
[ 30.565886] wlan0: RX AssocResp from e2:2e:ea:f6:f1:9c (capab=0x411
status=0 aid=2)
[ 30.565946] wlan0: associated
[ 30.565956] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.000509] mmc0: Timeout waiting for hardware interrupt.
[ 46.017715] mmc0: Timeout waiting for hardware interrupt.
[ 56.029927] mmc0: Timeout waiting for hardware interrupt.
[ 66.046026] mmc0: Timeout waiting for hardware interrupt.
[ 66.048292] mmc0: error -110 whilst initialising SD card
[ 76.061898] mmc0: Timeout waiting for hardware interrupt.
[ 86.109702] mmc0: Timeout waiting for hardware interrupt.
[ 96.125392] mmc0: Timeout waiting for hardware interrupt.
[ 106.140969] mmc0: Timeout waiting for hardware interrupt.
[ 116.156460] mmc0: Timeout waiting for hardware interrupt.
[ 126.171840] mmc0: Timeout waiting for hardware interrupt.
[ 136.187073] mmc0: Timeout waiting for hardware interrupt.
[ 146.202215] mmc0: Timeout waiting for hardware interrupt.
[ 156.217303] mmc0: Timeout waiting for hardware interrupt.
[ 166.232287] mmc0: Timeout waiting for hardware interrupt.
[ 176.247103] mmc0: Timeout waiting for hardware interrupt.
[ 186.260775] mmc0: Timeout waiting for hardware interrupt.
[ 196.274372] mmc0: Timeout waiting for hardware interrupt.
[ 206.288014] mmc0: Timeout waiting for hardware interrupt.
[ 216.333537] mmc0: Timeout waiting for hardware interrupt.
[ 226.347076] mmc0: Timeout waiting for hardware interrupt.
[ 236.360566] mmc0: Timeout waiting for hardware interrupt.
[ 246.374052] mmc0: Timeout waiting for hardware interrupt.
[ 256.387524] mmc0: Timeout waiting for hardware interrupt.
[ 266.400946] mmc0: Timeout waiting for hardware interrupt.
[ 276.414311] mmc0: Timeout waiting for hardware interrupt.
[ 286.427688] mmc0: Timeout waiting for hardware interrupt.
[ 296.441031] mmc0: Timeout waiting for hardware interrupt.
[ 306.454410] mmc0: Timeout waiting for hardware interrupt.
[ 316.467691] mmc0: Timeout waiting for hardware interrupt.
[ 326.480989] mmc0: Timeout waiting for hardware interrupt.
[ 336.494216] mmc0: Timeout waiting for hardware interrupt.
[ 346.539453] mmc0: Timeout waiting for hardware interrupt.
[ 356.552676] mmc0: Timeout waiting for hardware interrupt.
[ 366.565912] mmc0: Timeout waiting for hardware interrupt.
[ 376.579078] mmc0: Timeout waiting for hardware interrupt.
[ 386.592246] mmc0: Timeout waiting for hardware interrupt.
[ 396.605407] mmc0: Timeout waiting for hardware interrupt.
[ 406.618595] mmc0: Timeout waiting for hardware interrupt.
[ 416.631703] mmc0: Timeout waiting for hardware interrupt.
[ 426.644804] mmc0: Timeout waiting for hardware interrupt.
[ 436.657895] mmc0: Timeout waiting for hardware interrupt.
[ 446.671020] mmc0: Timeout waiting for hardware interrupt.
[ 456.684093] mmc0: Timeout waiting for hardware interrupt.
[ 466.697135] mmc0: Timeout waiting for hardware interrupt.
On 12/22/14, Tomasz Nitecki <tnnn at tnnn.pl> wrote:
> tags 773730 + moreinfo
> severity 773730 normal
> thanks
>
>
> Hey,
>
> coocoo, can you please provide us with some more information:
>
> 1. Please, attach the output of 'dmesg' (after both system boot and
> inserting a card).
>
> 2. Can you check if you have 'tg3' module loaded?
>
> 3. You might want to look at [1] to get some hints. Did you try it before?
>
> When responding, please remember to cc 773730 at bugs.debian.org (your
> response will be visible on the public, web browsable bug tracker at [2]).
>
> Thanks for your report!
>
>
> Regards,
> T.
>
> [1]
> http://www.linuxquestions.org/questions/linux-hardware-18/sd-card-not-recognized-on-linux-3-12-6-1-arch-4175492509/
> [2] https://bugs.debian.org/773730
>
>
More information about the Virtual-pkg-base-maintainers
mailing list