[Yaird-devel] Bug#329319: swsusp: updates for suspend2
Hamish Moffatt
hamish at debian.org
Tue Jan 24 01:40:04 UTC 2006
On Mon, Jan 23, 2006 at 03:30:04PM -0500, C. Scott Ananian wrote:
> On Tue, 24 Jan 2006, Hamish Moffatt wrote:
>
> >Scott's latest patch needs a minor adjustment for recent suspend2
> >patches, which use /proc/suspend2 instead of /proc/software_suspend.
>
> When was this change made to suspend2? The code might want to try using
> /proc/software_suspend if /proc/suspend2 doesn't exist, in order to
> support older versions of suspend2 (unless this change was ancient).
Good idea. It looks like it changed in 2.2-rc8; 2.2 was just released
last night. I've attached a new patch although I haven't actually tested
the revision yet (but it is trivial).
> Also, if you've tested it, I'd appreciate if your patch would remove the
> "# XXX: untested!" comment I had to write. ;-)
Good point :-)
One issue is that it can't work out where to resume from itself; this
has to come as a resume2= parameter or hard-coded in the kernel. It
doesn't seem to be possible to poke it into /proc somewhere as the patch
does for swsusp.
thanks
Hamish
--- 1000_resume.patch.orig 2006-01-24 09:23:05.000000000 +1300
+++ 1000_resume.patch 2006-01-24 14:36:25.000000000 +1300
@@ -151,7 +151,7 @@
! ydebug)
! INIT_DEBUG=yes
! esac
-@@ -368,6 +384,40 @@ TEMPLATE SET
+@@ -368,6 +384,43 @@ TEMPLATE SET
#
@@ -163,8 +163,11 @@
+ BEGIN
+ !if [ -z "$noresume" ]
+ !then
-+ ! # for suspend2
-+ ! # XXX: untested!
++ ! # for suspend2 (>= 2.2-rc8)
++ ! if [ -w /proc/suspend2/do_resume ]; then
++ ! echo > /proc/suspend2/do_resume
++ ! fi
++ ! # for suspend2 (< 2.2rc8)
+ ! if [ -w /proc/software_suspend/do_resume ]; then
+ ! echo > /proc/software_suspend/do_resume
+ ! fi
@@ -234,7 +237,7 @@
! ydebug)
! INIT_DEBUG=yes
! esac
-@@ -379,6 +395,40 @@ TEMPLATE SET
+@@ -379,6 +395,43 @@ TEMPLATE SET
#
@@ -246,8 +249,11 @@
+ BEGIN
+ !if [ -z "$noresume" ]
+ !then
-+ ! # for suspend2
-+ ! # XXX: untested!
++ ! # for suspend2 (>= 2.2-rc8)
++ ! if [ -w /proc/suspend2/do_resume ]; then
++ ! echo > /proc/suspend2/do_resume
++ ! fi
++ ! # for suspend2 (< 2.2rc8)
+ ! if [ -w /proc/software_suspend/do_resume ]; then
+ ! echo > /proc/software_suspend/do_resume
+ ! fi
--
Hamish Moffatt VK3SB <hamish at debian.org> <hamish at cloud.net.au>
-------------- next part --------------
diff -ruHp yaird-0.0.11-debpat/perl/Parser.pm yaird-0.0.11-mod2/perl/Parser.pm
--- yaird-0.0.11-debpat/perl/Parser.pm 2005-12-09 13:58:20.000000000 -0500
+++ yaird-0.0.11-mod2/perl/Parser.pm 2005-12-09 17:20:51.000000000 -0500
@@ -311,6 +311,7 @@ goal_directive :
| network_directive[fileName => $arg{fileName}]
| module_directive[fileName => $arg{fileName}]
| optional_module_directive[fileName => $arg{fileName}]
+ | resume_directive[fileName => $arg{fileName}]
| mountdir_directive[fileName => $arg{fileName}]
| mountdev_directive[fileName => $arg{fileName}]
| <error>
@@ -377,6 +378,19 @@ optional_module_directive: 'OPTIONAL' 'M
}
#
+ # Load modules for swap device, and attempt to resume from it
+ #
+resume_directive : 'RESUME' <commit> pathname(?)
+ {
+ $return = {
+ type => 'resume',
+ value => @{$item{'pathname(?)'}}[0],
+ origin => "$arg{fileName}:$prevline",
+ };
+ }
+ | <error: Invalid argument to resume directive>
+
+ #
# Mount the fs that fstab lists for pathname
#
mountdir_directive: 'MOUNTDIR' <commit> pathname mount_point
diff -ruHp yaird-0.0.11-debpat/perl/Plan.pm yaird-0.0.11-mod2/perl/Plan.pm
--- yaird-0.0.11-debpat/perl/Plan.pm 2005-12-09 13:58:20.000000000 -0500
+++ yaird-0.0.11-mod2/perl/Plan.pm 2005-12-09 17:35:31.000000000 -0500
@@ -623,6 +623,42 @@ sub addFsTabMount ($$$) {
addBlockDevMount ($actions, $blockDevName, $mountPoint);
}
+#
+# addResumePlan -- add list of actions to load modules necessary to
+# access swap device (either given, or found from /etc/fstab), then
+# (if a resume device was found or given) add a short script which
+# will effect the resume-from-swap from the given device.
+#
+sub addResumePlan ($$) {
+ my ($actions, $swapDevName) = @_;
+ # treat optional parameter uniformly: '' is equivalent to undef.
+ $swapDevName=undef if $swapDevName eq '' || $swapDevName eq '--';
+ if (! defined ($swapDevName)) {
+ # find resume-from-swap device in fstab; it will be the
+ # entry with <type>='swap' and <options> including 'resume'
+ for my $entry (@{FsTab::all()}) {
+ if ($entry->type eq 'swap' &&
+ $entry->opts->exists('resume')) {
+ if (defined ($swapDevName)) {
+ Base::fatal("duplicate resume-swap entries in fstab.");
+ }
+ $swapDevName = $entry->dev;
+ }
+ }
+ }
+ if (defined ($swapDevName)) {
+ # device must be in /dev, to determine whether
+ # it's raid, lvm, scsi or whatever.
+ my $abd = ActiveBlockDevTab::findByPath($swapDevName);
+ if (! defined ($abd)) {
+ Base::fatal ("swap block device '$swapDevName' unavailable");
+ }
+ addDevicePlan ($actions, $abd, []);
+ # now add script which will do the resume from this device.
+ $actions->add ("resume", $swapDevName,
+ devno => $abd->devno);
+ }
+}
#
# makePlan -- given list of goals read from config file,
@@ -652,6 +688,9 @@ sub makePlan ($) {
elsif ($type eq 'network') {
addNetworkPlan ($actions);
}
+ elsif ($type eq 'resume') {
+ addResumePlan ($actions, $value);
+ }
elsif ($type eq 'mountdir') {
my $mountPoint = $goal->{mountPoint};
Base::assert (defined ($mountPoint));
diff -ruHp yaird-0.0.11-debpat/templates/Default.cfg.in yaird-0.0.11-mod2/templates/Default.cfg.in
--- yaird-0.0.11-debpat/templates/Default.cfg.in 2005-12-09 13:58:20.000000000 -0500
+++ yaird-0.0.11-mod2/templates/Default.cfg.in 2005-12-09 14:13:27.000000000 -0500
@@ -129,6 +129,20 @@ CONFIG
# TEMPLATE nfsstart
#
+ # RESUME -- handle resume-from-swap (swsusp or suspend2).
+ #
+ # This will ensure that all modules required to access the
+ # resume device (a swap device with the 'resume' option
+ # specified in /etc/fstab) are loaded, and then will attempt
+ # to perform a resume. This does nothing if we didn't
+ # just perform a suspend-to-disk.
+ #
+ # You can override the swap partition to resume from by
+ # providing an optional parameter, ie:
+ # RESUME "/dev/hda5"
+ RESUME
+
+ #
# MOUNTDIR -- Given a directory name that occurs in
# fstab, eg "/", insert all modules needed to access
# the underlying block device and file system type,
diff -ruHp yaird-0.0.12/templates.old/Debian.cfg yaird-0.0.12/templates/Debian.cfg
--- yaird-0.0.12/templates.old/Debian.cfg 2006-01-19 21:41:03.000000000 -0500
+++ yaird-0.0.12/templates/Debian.cfg 2006-01-19 21:46:42.000000000 -0500
@@ -167,7 +167,11 @@ TEMPLATE SET
!# ro,rw - mount root read-only or read-write.
!# This is like a mount -r; it overrules
!# a -o rw.
- !# noresume, resume - to be done
+ !# noresume, resume= - should we resume from a
+ !# suspend-to-disk? The resume parameter
+ !# is optional, but overrides automatic
+ !# detection of the resume partition if present.
+ !# noresume prevents us from attempting to resume.
!# ide - options for module ide_core.
!# need a way to append these to proper
!# module. do a check on module name
@@ -177,6 +181,9 @@ TEMPLATE SET
!ro=-r
!ip=
!nfsroot=
+ !noresume=
+ !resume=
+ !resume2=
!init=/sbin/init
!for i in $(cat /proc/cmdline)
!do
@@ -196,6 +203,15 @@ TEMPLATE SET
! nfsroot=*)
! nfsroot="$i"
! ;;
+ ! noresume)
+ ! noresume=1
+ ! ;;
+ ! resume=*)
+ ! resume=${i#resume=}
+ ! ;;
+ ! resume2=*)
+ ! resume2=${i#resume2=}
+ ! ;;
! ydebug)
! INIT_DEBUG=yes
! esac
@@ -368,6 +384,43 @@ TEMPLATE SET
#
+ # Do a resume from swap, unless 'noresume' is on the command-line.
+ #
+ TEMPLATE resume
+ BEGIN
+ SCRIPT "/init"
+ BEGIN
+ !if [ -z "$noresume" ]
+ !then
+ ! # for suspend2 (>= 2.2-rc8)
+ ! if [ -w /proc/suspend2/do_resume ]; then
+ ! echo > /proc/suspend2/do_resume
+ ! fi
+ ! # for suspend2 (< 2.2rc8)
+ ! if [ -w /proc/software_suspend/do_resume ]; then
+ ! echo > /proc/software_suspend/do_resume
+ ! fi
+ ! # for swsusp
+ ! if [ -n "$resume" ]
+ ! then
+ ! case "$resume" in
+ ! [0-9]*:[0-9]*)
+ ! echo "$resume" > /sys/power/resume
+ ! ;;
+ ! *[a-z]*[0-9])
+ ! cat /sys/block/*/${resume#/dev/}/dev > \
+ ! /sys/power/resume
+ ! ;;
+ ! esac
+ ! else
+ ! echo <TMPL_VAR NAME=devno> > /sys/power/resume
+ ! fi
+ !fi
+ END SCRIPT
+ END TEMPLATE
+
+
+ #
# NOTE: honouring the kernel cmdline option ro,rw
# is very nice, but... If you have an ext3 in a
# file loopback-mounted from vfat, it's unlikely
diff -ruHp yaird-0.0.12/templates.old/Fedora.cfg yaird-0.0.12/templates/Fedora.cfg
--- yaird-0.0.12/templates.old/Fedora.cfg 2006-01-19 21:41:03.000000000 -0500
+++ yaird-0.0.12/templates/Fedora.cfg 2006-01-19 21:46:23.000000000 -0500
@@ -182,7 +182,11 @@ TEMPLATE SET
!# ro,rw - mount root read-only or read-write.
!# This is like a mount -r; it overrules
!# a -o rw.
- !# noresume, resume - to be done
+ !# noresume, resume= - should we resume from a
+ !# suspend-to-disk? The resume parameter
+ !# is optional, but overrides automatic
+ !# detection of the resume partition if present.
+ !# noresume prevents us from attempting to resume.
!# ide - options for module ide_core.
!# need a way to append these to proper
!# module. do a check on module name
@@ -192,6 +196,9 @@ TEMPLATE SET
!ro=-r
!ip=
!nfsroot=
+ !noresume=
+ !resume=
+ !resume2=
!init=/sbin/init
!for i in $(cat /proc/cmdline)
!do
@@ -211,6 +218,15 @@ TEMPLATE SET
! nfsroot=*)
! nfsroot="$i"
! ;;
+ ! noresume)
+ ! noresume=1
+ ! ;;
+ ! resume=*)
+ ! resume=${i#resume=}
+ ! ;;
+ ! resume2=*)
+ ! resume2=${i#resume2=}
+ ! ;;
! ydebug)
! INIT_DEBUG=yes
! esac
@@ -379,6 +395,43 @@ TEMPLATE SET
#
+ # Do a resume from swap, unless 'noresume' is on the command-line.
+ #
+ TEMPLATE resume
+ BEGIN
+ SCRIPT "/init"
+ BEGIN
+ !if [ -z "$noresume" ]
+ !then
+ ! # for suspend2 (>= 2.2-rc8)
+ ! if [ -w /proc/suspend2/do_resume ]; then
+ ! echo > /proc/suspend2/do_resume
+ ! fi
+ ! # for suspend2 (< 2.2rc8)
+ ! if [ -w /proc/software_suspend/do_resume ]; then
+ ! echo > /proc/software_suspend/do_resume
+ ! fi
+ ! # for swsusp
+ ! if [ -n "$resume" ]
+ ! then
+ ! case "$resume" in
+ ! [0-9]*:[0-9]*)
+ ! echo "$resume" > /sys/power/resume
+ ! ;;
+ ! *[a-z]*[0-9])
+ ! cat /sys/block/*/${resume#/dev/}/dev > \
+ ! /sys/power/resume
+ ! ;;
+ ! esac
+ ! else
+ ! echo <TMPL_VAR NAME=devno> > /sys/power/resume
+ ! fi
+ !fi
+ END SCRIPT
+ END TEMPLATE
+
+
+ #
# NOTE: honouring the kernel cmdline option ro,rw
# is very nice, but... If you have an ext3 in a
# file loopback-mounted from vfat, it's unlikely
More information about the Yaird-devel
mailing list