[Debburn-devel] problem burning cdrom iso

[Omry Yadan]

having a problem to burn an iso file to a cdrom.
any idea what can be the reason?

debug output:
System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version:  3.3.7
Kernel:      2.6.17.1smp-4gb
Devices
-----------------------
ASUS DRW-1608P3S 1.06 (/dev/hdc, ) at  [CD-R; CD-RW; CD-ROM; DVD-ROM;
DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM;
DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-R Dual Layer Jump;
DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R;
DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P;
SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite; Layer Jump]

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel at lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
Possible reason: wodim not installed SUID root.
/usr/bin/X11/wodim: Warning: using inofficial version of libscg (debburn
project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
/usr/bin/X11/wodim: Warning: using inofficial libscg transport code
version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86
05/11/22 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 1 = CD-ROM
Warning: This version of libscg has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not
behave
as expected.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'ASUS    '
Identifikation : 'DRW-1608P3S     '
Revision       : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0016
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x0012
Profile: 0x0002
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1267712 = 1238 KB
FIFO size      : 4194304 = 4096 KB
Error: Cannot gain SYS_RAWIO capability, is wodim installed SUID root?
Reason: Operation not permitted
Track 01: data   586 MB       
Total size:      673 MB (66:44.53) = 300340 sectors
Lout start:      674 MB (66:46/40) = 300340 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  ATIP start of lead in:  -11528 (97:28/22)
  ATIP start of lead out: 359842 (79:59/67)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 13
Manufacturer: Multi Media Masters & Machinary SA
Blocks total: 359842 Blocks current: 359842 Blocks remaining: 59502
Speed set to 5644 KB/s
Starting to write CD/DVD at speed  32.0 in dummy TAO mode for single
session.
Last chance to quit, starting dummy write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Starting new track at sector: 0
Track 01:    0 of  586 MB written.
Track 01:    1 of  586 MB written (fifo  93%) [buf 100%]  28.3x.
/usr/bin/X11/wodim: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 02 E8 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error
(ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.002s timeout 40s
/usr/bin/X11/wodim: A write error occured.
/usr/bin/X11/wodim: Please properly read the error message above.
write track data: error after 1523712 bytes
Writing  time:    9.939s
Average write speed 406.1x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.127s

cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=/dev/hdc speed=32 -tao -dummy
driveropts=burnfree -eject -data /home/omry/downloads/file.iso