[Debburn-devel] problem burning cdrom iso

Thu Nov 16 00:04:31 CET 2006

#include <hallo.h>
* Omry Yadan [Fri, Nov 10 2006, 12:01:52PM]:
> having a problem to burn an iso file to a cdrom.
> any idea what can be the reason?

I have one. Make sure that DMA mode is enabled for this device. Check
with hdparm. If it is not enabled and using "hdparm -d1 /dev/hdc" helps,
use /etc/hdparm.conf to make it default.

> debug output:
> System
> -----------------------
> K3b Version: 0.12.17
> 
> KDE Version: 3.5.5
> QT Version:  3.3.7
> Kernel:      2.6.17.1smp-4gb
> Devices
> -----------------------
> ASUS DRW-1608P3S 1.06 (/dev/hdc, ) at  [CD-R; CD-RW; CD-ROM; DVD-ROM;
> DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM;
> DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-R Dual Layer Jump;
> DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R;
> DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P;
> SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite; Layer Jump]
> 
> Used versions
> -----------------------
> cdrecord: 2.1.1a03
> 
> cdrecord
> -----------------------
> This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
> way, don't refer to it as "cdrecord". Send problem reports to
> debburn-devel at lists.alioth.debian.org, don't bother Joerg Schilling with any
> problems caused by this application.
> Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
> scsidev: '/dev/hdc'
> devname: '/dev/hdc'
> scsibus: -2 target: -2 lun: -2
> Linux sg driver version: 3.5.27
> Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
> Possible reason: wodim not installed SUID root.
> /usr/bin/X11/wodim: Warning: using inofficial version of libscg (debburn
> project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright
> 1988,1995,2000-2004 J. Schilling').
> /usr/bin/X11/wodim: Warning: using inofficial libscg transport code
> version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86
> 05/11/22 Copyright 1997 J. Schilling').
> SCSI buffer size: 64512
> TOC Type: 1 = CD-ROM
> Warning: This version of libscg has not been configured via the standard
> autoconfiguration method of the Schily makefile system. There is a high risk
> that the code is not configured correctly and for this reason will not
> behave
> as expected.
> Driveropts: 'burnfree'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   :
> Vendor_info    : 'ASUS    '
> Identifikation : 'DRW-1608P3S     '
> Revision       : '1.06'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: 0x0009
> Profile: 0x002B
> Profile: 0x001B
> Profile: 0x001A
> Profile: 0x0016
> Profile: 0x0015
> Profile: 0x0014
> Profile: 0x0013
> Profile: 0x0012
> Profile: 0x0002
> Profile: 0x0011
> Profile: 0x0010
> Profile: 0x000A
> Profile: 0x0009 (current)
> Profile: 0x0008
> Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
> Driver flags   : MMC-3 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1267712 = 1238 KB
> FIFO size      : 4194304 = 4096 KB
> Error: Cannot gain SYS_RAWIO capability, is wodim installed SUID root?
> Reason: Operation not permitted
> Track 01: data   586 MB       
> Total size:      673 MB (66:44.53) = 300340 sectors
> Lout start:      674 MB (66:46/40) = 300340 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 4
>   Is not unrestricted
>   Is not erasable
>   ATIP start of lead in:  -11528 (97:28/22)
>   ATIP start of lead out: 359842 (79:59/67)
> Disk type:    Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 13
> Manufacturer: Multi Media Masters & Machinary SA
> Blocks total: 359842 Blocks current: 359842 Blocks remaining: 59502
> Speed set to 5644 KB/s
> Starting to write CD/DVD at speed  32.0 in dummy TAO mode for single
> session.
> Last chance to quit, starting dummy write in 2 seconds.
>    1 seconds.
>    0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> trackno=0
> BURN-Free is OFF.
> Turning BURN-Free on
> Starting new track at sector: 0
> Track 01:    0 of  586 MB written.
> Track 01:    1 of  586 MB written (fifo  93%) [buf 100%]  28.3x.
> /usr/bin/X11/wodim: Success. write_g1: scsi sendcmd: no error
> CDB:  2A 00 00 00 02 E8 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x08 Qual 0x03 (logical unit communication crc error
> (ultra-dma/32)) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 63488
> cmd finished after 0.002s timeout 40s
> /usr/bin/X11/wodim: A write error occured.
> /usr/bin/X11/wodim: Please properly read the error message above.
> write track data: error after 1523712 bytes
> Writing  time:    9.939s
> Average write speed 406.1x.
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time:    0.127s
> 
> cdrecord command:
> -----------------------
> /usr/bin/X11/wodim -v gracetime=2 dev=/dev/hdc speed=32 -tao -dummy
> driveropts=burnfree -eject -data /home/omry/downloads/file.iso
> 
> 
> 
> _______________________________________________
> Debburn-devel mailing list
> Debburn-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/debburn-devel

-- 
Eigentlich bin ich ein sehr netter Kerl. Wenn ich Freunde hätte,
würden die das bestätigen können.