[Debburn-devel] cdrecord problem

[Carlo Andrea Massa]

System
-----------------------
K3b Version: 1.0beta1

KDE Version: 3.5.5 "release 30"
QT Version:  3.3.7
Kernel:      2.6.18.2-4-default
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4167B DL11 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM,
DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM,
DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump,
DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R,
DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P,
SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite]

HL-DT-ST DVD-ROM GDR8161B 0100 (/dev/sr1, ) [CD-ROM, DVD-ROM] [DVD-ROM,
CD-ROM] [None]
Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel at lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
/usr/bin/cdrecord: Operation not permitted. Warning: Cannot raise
RLIMIT_MEMLOCK limits./usr/bin/cdrecord: Cannot allocate memory.
WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
Possible reason: wodim not installed SUID root.
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debburn
project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
/usr/bin/cdrecord: Warning: using inofficial libscg transport code
version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86
05/11/22 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 1 = CD-ROM
Using libscg version 'debburn project-0.8ubuntu1+debburn1'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4167B'
Revision       : 'DL11'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0016
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13993 kB/s 79x CD 10x DVD
FIFO size      : 4194304 = 4096 KB
/usr/bin/cdrecord: Track 1 has unknown length.
/usr/bin/cdrecord: Use tsize= option in SAO mode to specify track size.
Track 01: data  unknown length

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=48 -dao -dummy
driveropts=burnfree -eject -data -


-- 
..............................................
Carlo Andrea Massa
Istituto per i Processi Chimico-Fisici (IPCF)
Consiglio Nazionale delle Ricerche (CNR)
   via Moruzzi 1 - 56124 Pisa (Italy)
   tel.: +39 050 315 2263
                     2639
e-mail: ca at ipcf.cnr.it
..............................................