[Debburn-devel] K3B Problem. Does not burn cdrom.

Mon Aug 20 09:30:39 UTC 2007

Here the error-message:

*******************************************************
System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.7 "release 64.1" 
QT Version:  3.3.8
Kernel:      2.6.18.8-0.5-default
Devices
-----------------------
HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/sr0, /dev/sg1) at  [CD-R; CD-RW; CD-Rom; 
DVD-Rom; DVD-Ram; DVD-R; DVD-RW; DVD-R doppelschichtig; DVD+R; DVD+RW; DVD+R 
doppelschichtig] [DVD-Rom; DVD-R Sequentiell; Zweischichtige DVD-R 
Sequentiell; Zweischicht-DVD-R Sprung; DVD-Ram; DVD-RW Eingeschränktes 
Überbrennen; DVD-RW Sequentiell; DVD+RW; DVD+R; DVD+R Doppelschicht; CD-Rom; 
CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; 
Eingeschränktes Überschreiben; Sprung zwischen DVD-Schichten]

K3b
-----------------------
Size of filesystem calculated: 131365

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel at lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.5.34
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debburn 
project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 
1988,1995,2000-2004 J. Schilling').
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version 
(cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 
Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 1 = CD-ROM
Using libscg version 'debburn project-0.8ubuntu1+debburn1'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H62N '
Revision       : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0015 
Profile: 0x0016 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 (current)
Profile: 0x000A 
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 16415 kB/s 93x CD 11x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data   256 MB        
Total size:      294 MB (29:11.53) = 131365 sectors
Lout start:      294 MB (29:13/40) = 131365 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 228484
Speed set to 8468 KB/s
Starting to write CD/DVD at speed  48.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.002s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01:    0 of  256 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.002s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 0 bytes
Writing  time:   26.694s
Average write speed  65.7x.
Fixating...
Fixating time:    0.005s

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=2,0,0 speed=48 -dao 
driveropts=burnfree -eject -data -tsize=131365s - 

mkisofs
-----------------------
131365
I: -input-charset not specified, using UTF-8 (detected in locale settings)
  0.39% done, estimate finish Mon Aug 20 07:56:04 2007
  0.77% done, estimate finish Mon Aug 20 07:53:58 2007
  1.15% done, estimate finish Mon Aug 20 07:53:16 2007
  1.52% done, estimate finish Mon Aug 20 07:52:54 2007
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid 
CDROM -volset  -appid  -publisher  -preparer  -sysid  -volset-size 
1 -volset-seqno 
1 -sort /tmp/kde-root/k3bhXZrpc.tmp -rational-rock -hide-list /tmp/kde-root/k3bNFOsbc.tmp -joliet -hide-joliet-list /tmp/kde-root/k3bAOo7Gb.tmp -full-iso9660-filenames -iso-level 
2 -path-list /tmp/kde-root/k3b16waJa.tmp
**************************************************************

Greetings

Sören