[Debburn-devel] Re: Problem recording with new system

[Eduard Martinescu]

Answers inlined below

On Sunday 25 February 2007 07:48:35 am scdbackup at gmx.net wrote:
> Hi,
>
> > Output of 'wodib -v -checkdrive dev=/dev/cdrw'
> > ...
> > Identification : 'DVD-RAM GSA-H30N'
> > ...
> > To my surprise, it seems there are NO supported modes listed.
>
> Out of curiosity and with no insight into wodim's
> ways with drive capability detection:
> Where is /dev/cdrw pointing at ?
>   ls -l /dev/cdrw

lrwxrwxrwx 1 root root      3 Feb 21 12:09 /dev/cdrw -> sr0
brw-rw---- 1 root cdrom 11, 0 Feb 21 12:09 /dev/sr0

> Do you get any device addresses listed by
> eginning native device scan. This may take a while if devices are busy...
>  wodim --devices
wodim: Overview of accessible drives (1 found) :
----------------------------------------------------------------------
0    dev='/dev/sr0'   rwrw-- :  'HL-DT-ST'  'DVD-RAM GSA-H30N'
----------------------------------------------------------------------

>   wodim -scanbus
Beginning native device scan. This may take a while if devices are busy...
wodim: Overview of accessible drives (1 found) :
----------------------------------------------------------------------
0    dev='/dev/sr0'   rwrw-- :  'HL-DT-ST'  'DVD-RAM GSA-H30N'
----------------------------------------------------------------------
DLKTZT79 mplayerplug-in # wodim -scanbus
scsibus0:
        0,0,0     0) 'ATA     ' 'ST3808110AS     ' '3.AA' Disk
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *
scsibus1:
        1,0,0   100) 'HL-DT-ST' 'DVD-RAM GSA-H30N' '1.04' Removable CD-ROM
        1,1,0   101) *
        1,2,0   102) *
        1,3,0   103) *
        1,4,0   104) *
        1,5,0   105) *
        1,6,0   106) *
        1,7,0   107) *
scsibus2:
        2,0,0   200) 'ATA     ' 'WDC WD3000JS-00P' '21.0' Disk
        2,1,0   201) *
        2,2,0   202) *
        2,3,0   203) *
        2,4,0   204) *
        2,5,0   205) *
        2,6,0   206) *
        2,7,0   207) *

>   wodim dev=ATA -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.