[Debian-eeepc-devel] 1101ha

[Juha Heinanen]

Cristian Ionescu-Idbohrn writes:

  I also tried the uvesafb thing (with variations), found on the same page,
  but no dice :(  Errors:

  dmesg:[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=3a698373-fa59-4797-8f33-64bd23cdee17 ro video=uvesafb acpi_osi=Linux nosplash
  dmesg:[    1.416132] uvesafb: Intel Corporation, Intel(r)Poulsbo Graphics Controller, Hardware Version 0.0, OEM: Intel(r)Poulsbo Graphics Chip Accelerated VGA BIOS, VBE v3.0
  dmesg:[    1.432749] uvesafb: VBIOS/hardware supports DDC2 transfers
  dmesg:[    1.445338] uvesafb: monitor limits: vf = 60 Hz, hf = 47 kHz, clk = 69 MHz
  dmesg:[    1.445604] uvesafb: scrolling: redraw
  dmesg:[    1.445682] uvesafb: cannot reserve video memory at 0x3f800000
  dmesg:[    1.445779] uvesafb: probe of uvesafb.0 failed with error -5

  dmesg.0:[   12.749141] uvesafb: Intel Corporation, Intel(r)Poulsbo Graphics Controller, Hardware Version 0.0, OEM: Intel(r)Poulsbo Graphics Chip Accelerated VGA BIOS, VBE v3.0
  dmesg.0:[   12.765943] uvesafb: VBIOS/hardware supports DDC2 transfers
  dmesg.0:[   12.778535] uvesafb: monitor limits: vf = 60 Hz, hf = 47 kHz, clk = 69 MHz
  dmesg.0:[   12.778800] uvesafb: scrolling: redraw
  dmesg.0:[   12.778879] uvesafb: cannot reserve video memory at 0x3f800000
  dmesg.0:[   12.778978] uvesafb: probe of uvesafb.0 failed with error -5

perhaps the problems are due to your 2.6.32 kernel.  what is written on
the page works on debian lenny with 2.6.30 kernel from backports.

-- juha