[Debian-ppc64-devel] Re: Debian Linux is running in a POWER5
IBM iSeries (i5) model 9406-520
Harald Görl
harald.goerl@rz.uni-augsburg.de
Wed, 22 Jun 2005 10:00:32 +0200
David Gaya schrieb:
> Hi Sven,
> I tried your ppc64.3 kernel and it went farther during booting. But it
> didn´t boot.
> This week I'm in Germany for the IBM Linux on POWER workshop. Next
> weekend I'll post details of the failure.
Hi David, Sven, *.
I also tried it and it worked in a virtual LPAR as well as in an LPAR
with all hardware visible.
As Sven said, could you please write where it stopped/failed?
I hope nobody gets angry i will post the "complete" startup console
output with Sven's kernel. Hoping that this is not "too large"...
David, hopefully you can compare the output with your "failing" console.
This is the output from Kernel:
http://people.debian.org/~luther/ppc64/debs/kernel-image-2.6.11/kernel-image-2.6.11-pseries_2.6.11-2.ppc64.3_powerpc.deb
################# here we go ##################
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
1 = SMS Menu 5 = Default Boot List
8 = Open Firmware Prompt 6 = Stored Boot List
Memory Keyboard Network SCSI Speaker
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM STARTING SOFTWARE IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM PLEASE WAIT... IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM
|
Elapsed time since release of system processors: 22719 mins 19 secs
Config file read, 1024 bytes
Welcome to yaboot version 1.3.13
Enter "help" to get some basic usage information
boot:
Linux old
boot: Linux
Please wait, loading kernel...
Elf64 kernel loaded...
Loading ramdisk...
ramdisk loaded at 02200000, size: 1824 Kbytes
OF stdout device is: /vdevice/vty@30000000
Hypertas detected, assuming LPAR !
command line: root=/dev/sda2 ro
memory layout at init:
alloc_bottom : 00000000023c8000
alloc_top : 0000000008000000
alloc_top_hi : 0000000020000000
rmo_top : 0000000008000000
ram_top : 0000000020000000
Looking for displays
found display : /pci@800000020000002/pci@2,6/pci@1/display@0, opening
... done
instantiating rtas at 0x00000000077c0000... done
0000000000000000 : boot cpu 0000000000000000
0000000000000002 : starting cpu hw idx 0000000000000002... done
0000000000000004 : starting cpu hw idx 0000000000000004... done
0000000000000006 : starting cpu hw idx 0000000000000006... done
0000000000000008 : starting cpu hw idx 0000000000000008... done
000000000000000a : starting cpu hw idx 000000000000000a... done
000000000000000c : starting cpu hw idx 000000000000000c... done
000000000000000e : starting cpu hw idx 000000000000000e... done
0000000000000010 : starting cpu hw idx 0000000000000010... done
0000000000000012 : starting cpu hw idx 0000000000000012... done
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x00000000026c9000 -> 0x00000000026ca3a1
Device tree struct 0x00000000026cb000 -> 0x00000000026d9000
Calling quiesce ...
returning from prom_init
Found initrd at 0xc000000002200000:0xc0000000023c8000
firmware_features = 0x1ffd5f
Partition configured for 80 cpus, operating system maximum is 32.
Starting Linux PPC64 2.6.11-pseries
-----------------------------------------------------
ppc64_pft_size = 0x1a
ppc64_debug_switch = 0x0
ppc64_interrupt_controller = 0x2
systemcfg = 0xc000000000005000
systemcfg->platform = 0x101
systemcfg->processorCount = 0x14
systemcfg->physicalMemorySize = 0x20000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.11-pseries (sven@pegasos2) (gcc version 3.4.4 (Debian
3.4.4-0ubuntu3)) #1 SMP Tue Jun 14 23:32:11 UTC 2005
[boot]0012 Setup Arch
Node 0 Memory:
Node 1 Memory: 0x0-0x20000000
0000000000000001 : starting thread
0000000000000003 : starting thread
0000000000000005 : starting thread
0000000000000007 : starting thread
0000000000000009 : starting thread
000000000000000b : starting thread
000000000000000d : starting thread
000000000000000f : starting thread
0000000000000011 : starting thread
0000000000000013 : starting thread
EEH: PCI Enhanced I/O Error Handling Enabled
PPC64 nvram contains 7168 bytes
Using shared processor idle loop
[boot]0015 Setup Done
Built 2 zonelists
Kernel command line: root=/dev/sda2 ro
[boot]0020 XICS Init
xics: no ISA interrupt controller
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 207.053000 MHz
time_init: processor frequency = 1656.424000 MHz
Found initrd at 0xc000000002200000:0xc0000000023c8000
firmware_features = 0x1ffd5f
Partition configured for 80 cpus, operating system maximum is 32.
Starting Linux PPC64 2.6.11-pseries
-----------------------------------------------------
ppc64_pft_size = 0x1a
ppc64_debug_switch = 0x0
ppc64_interrupt_controller = 0x2
systemcfg = 0xc000000000005000
systemcfg->platform = 0x101
systemcfg->processorCount = 0x14
systemcfg->physicalMemorySize = 0x20000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.11-pseries (sven@pegasos2) (gcc version 3.4.4 (Debian
3.4.4-0ubuntu3)) #1 SMP Tue Jun 14 23:32:11 UTC 2005
[boot]0012 Setup Arch
Node 0 Memory:
Node 1 Memory: 0x0-0x20000000
0000000000000001 : starting thread
0000000000000003 : starting thread
0000000000000005 : starting thread
0000000000000007 : starting thread
0000000000000009 : starting thread
000000000000000b : starting thread
000000000000000d : starting thread
000000000000000f : starting thread
0000000000000011 : starting thread
0000000000000013 : starting thread
EEH: PCI Enhanced I/O Error Handling Enabled
PPC64 nvram contains 7168 bytes
Using shared processor idle loop
[boot]0015 Setup Done
Built 2 zonelists
Kernel command line: root=/dev/sda2 ro
[boot]0020 XICS Init
xics: no ISA interrupt controller
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 207.053000 MHz
time_init: processor frequency = 1656.424000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
freeing bootmem node 1
Memory: 498560k/524288k available (2748k kernel code, 25344k reserved,
1256k data, 267k bss, 236k init)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Processor 1 found.
Processor 2 found.
Processor 3 found.
Processor 4 found.
Processor 5 found.
Processor 6 found.
Processor 7 found.
Processor 8 found.
Processor 9 found.
Processor 10 found.
Processor 11 found.
Processor 12 found.
Processor 13 found.
Processor 14 found.
Processor 15 found.
Processor 16 found.
Processor 17 found.
Processor 18 found.
Processor 19 found.
Brought up 20 CPUs
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd
Freeing initrd memory: 1824k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
IOMMU table initialized, virtual merging enabled
mapping IO 3fe00200000 -> e000000000000000, size: 100000
mapping IO 3fe00700000 -> e000000000100000, size: 100000
PCI: Probing PCI hardware done
i/pSeries Real Time Clock Driver v1.1
RTAS daemon started
audit: initializing netlink socket (disabled)
audit(1119426799.197:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
matroxfb: Matrox G450 detected
matroxfb: 640x480x8bpp (virtual: 640x26214)
matroxfb: framebuffer at 0x40080000000, mapped to 0xe000000080004000,
size 33554432
Console: switching to colour frame buffer device 80x30
fb0: MATROX frame buffer device
matroxfb_crtc2: secondary head of fb0 was registered as fb1
Using unsupported 640x480 MTRX,G450 at c0000000, depth=8, pitch=640
fb2: Open Firmware frame buffer device on
/pci@800000020000002/pci@2,6/pci@1/display@0
HVSI: registered 0 devices
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1824KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 236k freed
initrd-tools: 0.1.81.1
NET: Registered protocol family 1
SCSI subsystem initialized
ipr: IBM Power RAID SCSI Device Driver version: 2.0.12 (December 14, 2004)
ipr 0001:d0:01.0: Found IOA with IRQ: 167
ipr 0001:d0:01.0: Starting IOA initialization sequence.
ipr 0001:d0:01.0: Adapter firmware version: 020A0054
ipr 0001:d0:01.0: IOA initialized.
scsi0 : IBM 570B Storage Adapter
Vendor: IBM Model: DDS Gen5 Rev: V314
Type: Sequential-Access ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 1
Vendor: IBM Model: ST373453LC Rev: C51A
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi generic sg1 at scsi0, channel 0, id 3, lun 0, type 0
Vendor: IBM Model: ST373453LC Rev: C51A
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi generic sg2 at scsi0, channel 0, id 4, lun 0, type 0
Vendor: IBM Model: ST373453LC Rev: C51A
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi generic sg3 at scsi0, channel 0, id 5, lun 0, type 0
Vendor: IBM Model: ST373453LC Rev: C51A
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi generic sg4 at scsi0, channel 0, id 8, lun 0, type 0
Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770
Type: Enclosure ANSI SCSI revision: 02
Attached scsi generic sg5 at scsi0, channel 0, id 15, lun 0, type 13
scsi: unknown device type 31
Vendor: IBM Model: 570B001 Rev: 0150
Type: Unknown ANSI SCSI revision: 00
Attached scsi generic sg6 at scsi0, channel 255, id 255, lun 255, type 31
SCSI device sda: 143374000 512-byte hdwr sectors (73407 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 143374000 512-byte hdwr sectors (73407 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target3/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 >
Attached scsi disk sda at scsi0, channel 0, id 3, lun 0
SCSI device sdb: 143374000 512-byte hdwr sectors (73407 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 143374000 512-byte hdwr sectors (73407 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host0/bus0/target4/lun0: unknown partition table
Attached scsi disk sdb at scsi0, channel 0, id 4, lun 0
SCSI device sdc: 143374000 512-byte hdwr sectors (73407 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 143374000 512-byte hdwr sectors (73407 MB)
SCSI device sdc: drive cache: write through
/dev/scsi/host0/bus0/target5/lun0: unknown partition table
Attached scsi disk sdc at scsi0, channel 0, id 5, lun 0
SCSI device sdd: 143374000 512-byte hdwr sectors (73407 MB)
SCSI device sdd: drive cache: write through
SCSI device sdd: 143374000 512-byte hdwr sectors (73407 MB)
SCSI device sdd: drive cache: write through
/dev/scsi/host0/bus0/target8/lun0:
Attached scsi disk sdd at scsi0, channel 0, id 8, lun 0
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd 0000:c8:01.0: NEC Corporation USB
ohci_hcd 0000:c8:01.0: irq 133, pci mem 0x400b8001000
ohci_hcd 0000:c8:01.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: over-current change on port 1
ohci_hcd 0000:c8:01.1: NEC Corporation USB (#2)
ohci_hcd 0000:c8:01.1: irq 133, pci mem 0x400b8000000
ohci_hcd 0000:c8:01.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: over-current change on port 1
ehci_hcd 0000:c8:01.2: NEC Corporation USB 2.0
ehci_hcd 0000:c8:01.2: irq 133, pci mem 0x400b8002000
ehci_hcd 0000:c8:01.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:c8:01.2: park 0
ehci_hcd 0000:c8:01.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
USB Universal Host Controller Interface driver v2.2
st: Version 20041025, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 131072
loop: loaded (max 8 devices)
drivers/net/ibmveth.c: ibmveth: IBM i/pSeries Virtual Ethernet Driver 1.03
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.86 booting
Activating swap.
Adding 2099176k swap on /dev/sda7. Priority:-1 extents:1
Checking root file system...
fsck 1.37 (21-Mar-2005)
/: clean, 6684/513072 files, 302437/1026048 blocks
EXT3 FS on sda2, internal journal
System time was Wed Jun 22 07:53:23 UTC 2005.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Wed Jun 22 07:53:25 UTC 2005.
Cleaning up ifupdown...done.
Calculating module dependencies... done.
Loading modules...
atkbd
i8042
FATAL: Error inserting i8042
(/lib/modules/2.6.11-pseries/kernel/drivers/input/serio/i8042.ko):
Device or resource busy
ide-cd
ide-generic
FATAL: Module ide_generic not found.
psmouse
All modules loaded.
Checking all file systems...
fsck 1.37 (21-Mar-2005)
/tmp: clean, 15/1026088 files, 141445/2050032 blocks
/usr: clean, 51502/2101248 files, 328110/4194304 blocks
/var: clean, 4165/513024 files, 260263/1024508 blocks
Setting kernel variables ...
... done.
Mounting local filesystems...
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda6 on /tmp type ext3 (rw)
/dev/sda3 on /usr type ext3 (rw)
/dev/sda5 on /var type ext3 (rw)
Cleaning /tmp /var/run /var/lock.
Detecting hardware: e1000 ipr usb_ohci ehci_hcd
Skipping already loaded module e1000.
Skipping already loaded module ipr.
Skipping already loaded module ohci_hcd.
Skipping already loaded module ehci_hcd.
Running 0dns-down to make sure resolv.conf is ok...done.
Setting up networking...done.
Starting hotplug subsystem:
pci
ohci-hcd: already loaded
ohci-hcd: already loaded
ehci-hcd: already loaded
ignoring pci display device d9:00.0
e1000: already loaded
e1000: already loaded
e1000: already loaded
e1000: already loaded
ipr: already loaded
pci [success]
usb
usb [success]
isapnp
isapnp [success]
ide
ide [success]
input
input [success]
scsi
st: loaded sucessfully (for tape)
sd_mod: loaded sucessfully (for disk)
sd_mod: loaded sucessfully (for disk)
sd_mod: loaded sucessfully (for disk)
sd_mod: loaded sucessfully (for disk)
scsi [success]
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...e1000: eth0: e1000_watchdog: NIC Link
is Up 100 Mbps Full Duplex
done.
Starting portmap daemon: portmap.
Loading the saved-state of the serial devices...
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Wed Jun 22 09:53:37 CEST 2005
Running ntpdate to synchronize clockNET: Registered protocol family 10
Disabled Privacy Extensions on device c000000000407db0(lo)
IPv6 over IPv4 tunneling driver
.
Initializing random number generator...done.
Setting up X server socket directory /tmp/.X11-unix...done.
Setting up ICE socket directory /tmp/.ICE-unix...done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
0513-059 The ctrmc Subsystem has been started. Subsystem PID is 1526.
Starting portmap daemon: portmap.
Starting boot parameter server: bootparamd.
Starting MTA: exim4.
Starting internet superserver: inetd.
Starting printer spooler: lpd .
Starting OpenBSD Secure Shell server: sshd.
Starting virtual host services: ibmvscsis: initialized version 1.2
done.
Starting NFS common utilities: statd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Debian GNU/Linux 3.1 track console
track login: