[Debian-ppc64-devel] Re: Debian Linux is running in a POWER5 IBM iSeries (i5) model 9406-520
David Gaya
David Gaya <david.gaya@gmail.com>
Sat, 25 Jun 2005 16:36:54 +0200
Hi all,
here is the output of my boot.
Note that my system is not using real hardware, the kernel should
detect it and load ibmvscsi module.
See in the listing that my scsi is never detected, and the kernel can
not start from disk.
Harald, you said your system booted in a virtual LPAR,
was that LPAR using real scsi ?
or wat it using virtual scsi ?
Best regards,
david
##################### boot log ##############################
Please wait, loading kernel... =
=20
Elf64 kernel loaded... =
=20
Loading ramdisk... =
=20
ramdisk loaded at 02200000, size: 1964 Kbytes =
=20
OF stdout device is: /vdevice/vty@30000000 =
=20
Hypertas detected, assuming LPAR ! =
=20
command line: root=3D/dev/sda2 rw console=3Dhvc0 =
=20
memory layout at init: =
=20
alloc_bottom : 00000000023eb000 =
=20
alloc_top : 0000000008000000 =
=20
alloc_top_hi : 000000001a000000 =
=20
rmo_top : 0000000008000000 =
=20
ram_top : 000000001a000000 =
=20
Looking for displays =
=20
instantiating rtas at 0x00000000077ca000... done =
=20
0000000000000000 : boot cpu 0000000000000000 =
=20
copying OF device tree ... =
=20
Building dt strings... =
=20
Building dt structure... =
=20
Device tree strings 0x00000000026ec000 -> 0x00000000026ed03e =
=20
Device tree struct 0x00000000026ee000 -> 0x00000000026f5000 =
=20
Calling quiesce ... =
=20
returning from prom_init =
=20
Found initrd at 0xc000000002200000:0xc0000000023eb000 =
=20
firmware_features =3D 0x1ffd5f =
=20
Partition configured for 2 cpus. =
=20
Starting Linux PPC64 2.6.11-pseries =
=20
----------------------------------------------------- =
=20
ppc64_pft_size =3D 0x18 =
=20
ppc64_debug_switch =3D 0x0 =
=20
ppc64_interrupt_controller =3D 0x2 =
=20
systemcfg =3D 0xc000000000005000 =
=20
systemcfg->platform =3D 0x101 =
=20
systemcfg->processorCount =3D 0x2 =
=20
systemcfg->physicalMemorySize =3D 0x1a000000 =
=20
ppc64_caches.dcache_line_size =3D 0x80 =
=20
ppc64_caches.icache_line_size =3D 0x80 =
=20
htab_address =3D 0x0000000000000000 =
=20
htab_hash_mask =3D 0x1ffff =
=20
----------------------------------------------------- =
=20
[boot]0100 MM Init =
=20
[boot]0100 MM Init Done =
=20
Linux version 2.6.11-pseries (sven@pegasos2) (gcc version 3.4.4 (Debian 3.4=
.4-0u
buntu3)) #1 SMP Tue Jun 14 23:32:11 UTC 2005 =
=20
[boot]0012 Setup Arch =
=20
Node 0 Memory: 0x0-0x1a000000 =
=20
0000000000000001 : starting thread =
=20
EEH: No capable adapters found =
=20
PPC64 nvram contains 7168 bytes =
=20
Using shared processor idle loop =
=20
[boot]0015 Setup Done =
=20
Built 1 zonelists =
=20
Kernel command line: root=3D/dev/sda2 rw console=3Dhvc0 =
=20
[boot]0020 XICS Init =
=20
xics: no ISA interrupt controller =
=20
[boot]0021 XICS Done =
=20
PID hash table entries: 2048 (order: 11, 65536 bytes) =
=20
time_init: decrementer frequency =3D 187.548000 MHz =
=20
time_init: processor frequency =3D 1500.384000 MHz =
=20
Found initrd at 0xc000000002200000:0xc0000000023eb000 =
=20
firmware_features =3D 0x1ffd5f =
=20
Partition configured for 2 cpus. =
=20
Starting Linux PPC64 2.6.11-pseries =
=20
----------------------------------------------------- =
=20
ppc64_pft_size =3D 0x18 =
=20
ppc64_debug_switch =3D 0x0 =
=20
ppc64_interrupt_controller =3D 0x2 =
=20
systemcfg =3D 0xc000000000005000 =
=20
systemcfg->platform =3D 0x101 =
=20
systemcfg->processorCount =3D 0x2 =
=20
systemcfg->physicalMemorySize =3D 0x1a000000 =
=20
ppc64_caches.dcache_line_size =3D 0x80 =
=20
ppc64_caches.icache_line_size =3D 0x80 =
=20
htab_address =3D 0x0000000000000000 =
=20
htab_hash_mask =3D 0x1ffff =
=20
----------------------------------------------------- =
=20
[boot]0100 MM Init =
=20
[boot]0100 MM Init Done =
=20
Linux version 2.6.11-pseries (sven@pegasos2) (gcc version 3.4.4 (Debian 3.4=
.4-0u
buntu3)) #1 SMP Tue Jun 14 23:32:11 UTC 2005 =
=20
[boot]0012 Setup Arch =
=20
Node 0 Memory: 0x0-0x1a000000 =
=20
0000000000000001 : starting thread =
=20
EEH: No capable adapters found =
=20
PPC64 nvram contains 7168 bytes =
=20
Using shared processor idle loop =
=20
[boot]0015 Setup Done =
=20
Built 1 zonelists =
=20
Kernel command line: root=3D/dev/sda2 rw console=3Dhvc0 =
=20
[boot]0020 XICS Init =
=20
xics: no ISA interrupt controller =
=20
[boot]0021 XICS Done =
=20
PID hash table entries: 2048 (order: 11, 65536 bytes) =
=20
time_init: decrementer frequency =3D 187.548000 MHz =
=20
time_init: processor frequency =3D 1500.384000 MHz =
=20
Console: colour dummy device 80x25 =
=20
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) =
=20
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) =
=20
freeing bootmem node 0 =
=20
Memory: 402560k/425984k available (2748k kernel code, 23068k reserved, 1256=
k dat
a, 267k bss, 236k init) =
=20
Security Framework v1.0.0 initialized =
=20
SELinux: Disabled at boot. =
=20
Capability LSM initialized =
=20
Mount-cache hash table entries: 256 (order: 0, 4096 bytes) =
=20
Processor 1 found. =
=20
Brought up 2 CPUs =
=20
checking if image is initramfs...it isn't (bad gzip magic numbers); looks l=
ike a
n initrd =
=20
Freeing initrd memory: 1964k freed =
=20
NET: Registered protocol family 16 =
=20
PCI: Probing PCI hardware =
=20
PCI: Probing PCI hardware done =
=20
i/pSeries Real Time Clock Driver v1.1 =
=20
RTAS daemon started =
=20
IOMMU table initialized, virtual merging enabled =
=20
audit: initializing netlink socket (disabled) =
=20
audit(1119715440.269:0): initialized =
=20
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) =
=20
devfs: boot_options: 0x0 =
=20
Initializing Cryptographic API =
=20
HVSI: registered 0 devices =
=20
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled =
=20
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>) =
=20
io scheduler noop registered =
=20
io scheduler anticipatory registered =
=20
io scheduler deadline registered =
=20
io scheduler cfq registered =
=20
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize =
=20
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 =
=20
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=3D=
xx =20
mice: PS/2 mouse device common for all mice =
=20
NET: Registered protocol family 2 =
=20
IP: routing cache hash table of 2048 buckets, 32Kbytes =
=20
TCP established hash table entries: 16384 (order: 6, 262144 bytes) =
=20
TCP bind hash table entries: 16384 (order: 6, 262144 bytes) =
=20
TCP: Hash tables configured (established 16384 bind 16384) =
=20
RAMDISK: cramfs filesystem found at block 0 =
=20
RAMDISK: Loading 1964KiB [1 disk] into ram disk... done. =
=20
VFS: Mounted root (cramfs filesystem) readonly. =
=20
Freeing unused kernel memory: 236k freed =
=20
initrd-tools: 0.1.81.1 =
=20
NET: Registered protocol family 1 =
=20
SCSI subsystem initialized =
=20
drivers/net/ibmveth.c: ibmveth: IBM i/pSeries Virtual Ethernet Driver 1.03 =
=20
pivot_root: No such file or directory =
=20
/sbin/init: 432: cannot open dev/console: No such file =
=20
Kernel panic - not syncing: Attempted to kill init!