[Pcsclite-muscle] CCID_Receive Card absent or mute

Casey Tickes casey at gingerbreadshed.com
Mon Aug 28 21:13:55 UTC 2017


I am attempting to connect to a Mifare Plus SE 1K chip with a Pegoda N
reader, using node-pcsclite. My application runs fine with an Identiv
AMID2U Multi ISO reader, but I receive the following error when using the
Pegoda reader. Also, this reader is working fine with Mifare ULs and Mifare
Classic 1Ks.

CCID driver version: 1.4.7-1

pcsc-lite version 1.8.4.
Copyright (C) 1999-2002 by David Corcoran <corcoran at linuxnet.com>.
Copyright (C) 2001-2011 by Ludovic Rousseau <ludovic.rousseau at free.fr>.
Copyright (C) 2003-2004 by Damien Sauveron <sauveron at labri.fr>.
Report bugs to <muscle at lists.musclecard.com>.
Enabled features: Linux arm-unknown-linux-gnueabihf serial usb libudev
usbdropdir=/usr/lib/pcsc/drivers ipcdir=/var/run/pcscd
configdir=/etc/reader.conf.d

Reader Name: NXP Pegoda 2 N (1105FF10)
OS: Debian GNU/Linux 7
Hardware: BeagleBone Black
Middleware: node-pcsclite 0.4.4
Smartcard: Mifare Plus SE 1K

Here is the pcscd log:

44953625 ccid_usb.c:1132:InterruptRead() after (0) (0)
00000164 NotifySlotChange: 50 03
00000078 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00003472 -> 000000 65 00 00 00 00 00 13 00 00 00
00012248 <- 000000 81 00 00 00 00 00 13 00 00 00
00000149 ifdhandler.c:1813:IFDHICCPresence() Card present
00000078 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000086 -> 000000 65 00 00 00 00 00 14 00 00 00
00011853 <- 000000 81 00 00 00 00 00 14 00 00 00
00001754 ifdhandler.c:1813:IFDHICCPresence() Card present
00000151 ifdhandler.c:1114:IFDHPowerICC() action: PowerUp,
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000099 -> 000000 62 00 00 00 00 00 15 01 00 00
00020451 <- 000000 80 0C 00 00 00 00 15 00 00 00 3B 87 80 01 C1 05 21 30 00
77 C1 65
00001760 eventhandler.c:372:EHStatusHandlerThread() powerState:
POWER_STATE_POWERED
00001563 eventhandler.c:387:EHStatusHandlerThread() Card inserted into NXP
Pegoda 2 N (1105FF10) 00 00
00000846 winscard_svc.c:731:MSGSignalClient() Signal client: 9
00000499 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 9
00000541 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 9
00000493 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 9
00001970 winscard_svc.c:731:MSGSignalClient() Signal client: 10
00000138 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 10
00000479 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00006148 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00002759 Card ATR: 3B 87 80 01 C1 05 21 30 00 77 C1 65
00000127 ifdhandler.c:282:IFDHPolling()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 5000 ms
00000061 ccid_usb.c:1090:InterruptRead() before (0)
00003206 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 10
00015388 winscard_msg_srv.c:230:ProcessEventsServer() Common channel packet
arrival
00000345 winscard_msg_srv.c:242:ProcessEventsServer()
ProcessCommonChannelRequest detects: 11
00000073 pcscdaemon.c:93:SVCServiceRunLoop() A new context thread creation
is requested: 11
00007584 winscard_svc.c:297:ContextThread() Thread is started:
dwClientID=11, threadContext @0xcb6d0
00001872 winscard_svc.c:315:ContextThread() Received command: CMD_VERSION
from client 11
00000724 winscard_svc.c:327:ContextThread() Client is protocol version 4:2
00000924 winscard_svc.c:347:ContextThread() CMD_VERSION rv=0x0 for client 11
00000574 winscard_svc.c:315:ContextThread() Received command:
ESTABLISH_CONTEXT from client 11
00000503 winscard.c:193:SCardEstablishContext() Establishing Context:
0x33A66535
00000058 winscard_svc.c:408:ContextThread() ESTABLISH_CONTEXT rv=0x0 for
client 11
00001530 winscard_svc.c:315:ContextThread() Received command: CONNECT from
client 11
00000170 winscard.c:235:SCardConnect() Attempting Connect to NXP Pegoda 2 N
(1105FF10) 00 00 using protocol: 3
00000043 winscard.c:328:SCardConnect() powerState: POWER_STATE_INUSE
00000034 prothandler.c:87:PHSetProtocol() Attempting PTS to T=1
00000042 ifdhandler.c:663:IFDHSetProtocolParameters() protocol T=1,
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000072 towitoko/atr.c:329:ATR_GetDefaultProtocol() default protocol: T=0
00000036 PPS: Sending request: FF 01 FE
00000047 -> 000000 6F 03 00 00 00 00 16 00 00 00 FF 01 FE
00806672 <- 000000 80 00 00 00 00 00 16 40 FE 00
00002169 commands.c:1393:CCID_Receive Card absent or mute
00002055 ifdhandler.c:887:IFDHSetProtocolParameters() PPS_Exchange Failed
00000625 prothandler.c:103:PHSetProtocol() PTS failed (605), using T=0
00000109 winscard_svc.c:449:ContextThread() CONNECT rv=0x80100066 for
client 11
00020293 ccid_usb.c:1132:InterruptRead() after (0) (0)
00000186 NotifySlotChange: 50 02
00000081 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000087 -> 000000 65 00 00 00 00 00 17 00 00 00
00013515 <- 000000 81 00 00 00 00 00 17 02 00 00
00000161 ifdhandler.c:1813:IFDHICCPresence() Card absent
00000069 eventhandler.c:325:EHStatusHandlerThread() Card Removed From NXP
Pegoda 2 N (1105FF10) 00 00
00000066 winscard_svc.c:731:MSGSignalClient() Signal client: 9
00000052 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 9
00000173 winscard_svc.c:731:MSGSignalClient() Signal client: 10
00000062 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 10
00000143 ifdhandler.c:282:IFDHPolling()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 600000 ms
00000061 ccid_usb.c:1090:InterruptRead() before (0)
00000831 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 9
00000564 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00001546 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00000344 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 9
00005804 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 10
00160101 ccid_usb.c:1132:InterruptRead() after (0) (0)
00000169 NotifySlotChange: 50 03
00000076 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000087 -> 000000 65 00 00 00 00 00 18 00 00 00
00012658 <- 000000 81 00 00 00 00 00 18 00 00 00
00000152 ifdhandler.c:1813:IFDHICCPresence() Card present
00000074 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000085 -> 000000 65 00 00 00 00 00 19 00 00 00
00012103 <- 000000 81 00 00 00 00 00 19 00 00 00
00000162 ifdhandler.c:1813:IFDHICCPresence() Card present
00000079 ifdhandler.c:1114:IFDHPowerICC() action: PowerUp,
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000089 -> 000000 62 00 00 00 00 00 1A 01 00 00
00020201 <- 000000 80 0C 00 00 00 00 1A 00 00 00 3B 87 80 01 C1 05 21 30 00
77 C1 65
00000169 eventhandler.c:372:EHStatusHandlerThread() powerState:
POWER_STATE_POWERED
00000063 eventhandler.c:387:EHStatusHandlerThread() Card inserted into NXP
Pegoda 2 N (1105FF10) 00 00
00000057 winscard_svc.c:731:MSGSignalClient() Signal client: 9
00000051 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 9
00000505 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 9
00000481 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 9
00001944 winscard_svc.c:731:MSGSignalClient() Signal client: 10
00000115 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 10
00000691 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00003856 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00003806 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 10
00000879 Card ATR: 3B 87 80 01 C1 05 21 30 00 77 C1 65
00000099 ifdhandler.c:282:IFDHPolling()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 5000 ms
00000058 ccid_usb.c:1090:InterruptRead() before (0)
00003742 winscard_svc.c:315:ContextThread() Received command: CONNECT from
client 11
00000155 winscard.c:235:SCardConnect() Attempting Connect to NXP Pegoda 2 N
(1105FF10) 00 00 using protocol: 3
00000068 winscard.c:328:SCardConnect() powerState: POWER_STATE_INUSE
00000061 prothandler.c:87:PHSetProtocol() Attempting PTS to T=1
00000074 ifdhandler.c:663:IFDHSetProtocolParameters() protocol T=1,
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000070 towitoko/atr.c:329:ATR_GetDefaultProtocol() default protocol: T=0
00000060 PPS: Sending request: FF 01 FE
00000088 -> 000000 6F 03 00 00 00 00 1B 00 00 00 FF 01 FE
00806487 <- 000000 80 00 00 00 00 00 1B 40 FE 00
00000159 commands.c:1393:CCID_Receive Card absent or mute
00000076 ifdhandler.c:887:IFDHSetProtocolParameters() PPS_Exchange Failed
00000069 prothandler.c:103:PHSetProtocol() PTS failed (605), using T=0
00000064 winscard_svc.c:449:ContextThread() CONNECT rv=0x80100066 for
client 11
00030148 ccid_usb.c:1132:InterruptRead() after (0) (0)
00000161 NotifySlotChange: 50 02
00000077 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000086 -> 000000 65 00 00 00 00 00 1C 00 00 00
00013661 <- 000000 81 00 00 00 00 00 1C 02 00 00
00000162 ifdhandler.c:1813:IFDHICCPresence() Card absent
00000073 eventhandler.c:325:EHStatusHandlerThread() Card Removed From NXP
Pegoda 2 N (1105FF10) 00 00
00000065 winscard_svc.c:731:MSGSignalClient() Signal client: 9
00000050 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 9
00000185 winscard_svc.c:731:MSGSignalClient() Signal client: 10
00000059 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 10
00000145 ifdhandler.c:282:IFDHPolling()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 600000 ms
00000061 ccid_usb.c:1090:InterruptRead() before (0)

Thank you, any help would be greatly appreciated.

-- 


*Casey Tickes Senior Product Innovation Engineer Gingerbread Shed*
O: 877-886-3314 x737
www.gingerbreadshed.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pcsclite-muscle/attachments/20170828/1d5550b8/attachment.html>


More information about the Pcsclite-muscle mailing list