[Pkg-iscsi-maintainers] Bug#661397: iscsitarget: prompting due to modified conffiles which where not modified by the user

Thu Mar 29 12:01:22 UTC 2012

Package: iscsitarget
Version: 1.4.20.2-10
Followup-For: Bug #661397

I did an update of iscsitarget on my box and did not see the prompt. I will still try with older versions if time permits. But this stands low on priority on my list.

-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages iscsitarget depends on:
ii  libc6     2.13-27
ii  lsb-base  4.1+Debian0
ii  procps    1:3.3.2-3

Versions of packages iscsitarget recommends:
pn  iscsitarget-module  <none>

Versions of packages iscsitarget suggests:
ii  iscsitarget-dkms  1.4.20.2-10

-- Configuration Files:
/etc/iet/ietd.conf changed:
Target iqn.2001-04.com.example:storage.debian-sanboot
	Lun 0 Path=/dev/vdl,Type=fileio,ScsiId=vdl,ScsiSN=vdl
	Alias Debian-SANBooot
Target iqn.2001-04.com.example:storage.debian
	# CHAP Users
	#
	# The same rules as for discovery users apply here.
	#
	# Don't set them if you don't want to use CHAP authentication.
	#
	#IncomingUser joe secret
	#OutgoingUser jim 12charpasswd
	#
	# Logical Unit definition
	#
	# Block devices, regular files (fileio only), LVM, and RAID
	# can be offered to the initiators as a block device.
	#
	# Lun numbers MUST start with zero (each target needs a Lun 0)
	#
	Lun 0 Path=/dev/vdg,Type=fileio,ScsiId=vdb,ScsiSN=vdb
	Lun 1 Path=/dev/vdh,Type=fileio,ScsiId=vdc,ScsiSN=vdc
	Lun 2 Path=/dev/vdi,Type=fileio,ScsiId=vdd,ScsiSN=vdd
	Lun 3 Path=/dev/vdj,Type=fileio,ScsiId=vde,ScsiSN=vde
	Lun 4 Path=/dev/vdk,Type=fileio,ScsiId=vdf,ScsiSN=vdf
	#
	# Alias name for this target (Not Used)
	#
	Alias Debian
Target iqn.2001-04.com.example:storage.disk2.sys1.xyz
	# CHAP Users
	#
	# The same rules as for discovery users apply here.
	#
	# Don't set them if you don't want to use CHAP authentication.
	#
	#IncomingUser joe secret
	#OutgoingUser jim 12charpasswd
	#
	# Logical Unit definition
	#
	# Block devices, regular files (fileio only), LVM, and RAID
	# can be offered to the initiators as a block device.
	#
	# Lun numbers MUST start with zero (each target needs a Lun 0)
	#
	Lun 0 Path=/dev/vdb,Type=fileio,ScsiId=vdb,ScsiSN=vdb
	Lun 1 Path=/dev/vdc,Type=fileio,ScsiId=vdc,ScsiSN=vdc
	Lun 2 Path=/dev/vdd,Type=fileio,ScsiId=vdd,ScsiSN=vdd
	Lun 3 Path=/dev/vde,Type=fileio,ScsiId=vde,ScsiSN=vde
	Lun 4 Path=/dev/vdf,Type=fileio,ScsiId=vdf,ScsiSN=vdf
	#
	# Alias name for this target (Not Used)
	#
	Alias Fedora
	#
	# Various iSCSI parameters
	# (not all are used right now, see also iSCSI spec for details)
	#
	# Outgoing SCSI data (initiator to target user data or command
	# parameters) is sent as either solicited data or unsolicited data.
	# Solicited data is sent in response to R2T PDUs.  Unsolicited data
	# can be sent as part of an iSCSI command PDU sequence
	# ("Immediate Data") or as a separate iSCSI data PDU sequence.
	#
	#MaxConnections		1		# Number of connections/session
						# We only support 1
	#MaxSessions		0		# Number of sessions/target
						# 0 = no explicit limit
	#InitialR2T		Yes		# Wait first for R2T
						# Yes = no unsolicited data
	#ImmediateData		Yes		# Data can accompany command
						# Yes = cmnd/data in same PDU
	#MaxRecvDataSegmentLength 8192		# Max data per PDU to receive
	#MaxXmitDataSegmentLength 8192		# Max data per PDU to transmit
	#MaxBurstLength		262144		# Max data per sequence (R2T)
	#FirstBurstLength	65536		# Max unsolicited data sequence
	#DefaultTime2Wait	2		# Secs wait for ini to log out
						# Not used
	#DefaultTime2Retain	20		# Secs keep cmnds after log out
						# Not used
	#MaxOutstandingR2T	1		# Max outstanding R2Ts per cmnd
	#DataPDUInOrder		Yes		# Data in PDUs is ordered
						# We only support ordered
	#DataSequenceInOrder	Yes		# PDUs in sequence are ordered
						# We only support ordered
	#ErrorRecoveryLevel	0		# We only support level 0
	#HeaderDigest		None,CRC32C	# PDU header checksum algo list
						# None or CRC32C
						# If only one is set then the
						# initiator must agree to it
						# or the connection will fail
	#DataDigest		None,CRC32C	# PDU data checksum algo list
						# Same as above
	#MaxSessions		0		# Maximum number of sessions to
						# this target - 0 = unlimited
	#NOPInterval		0		# Send a NOP-In ping each after
						# that many seconds if the conn
						# is otherwise idle - 0 = off
	#NOPTimeout		0 		# Wait that many seconds for a
						# response on a NOP-In ping
						# If 0 or > NOPInterval, NOPInterval
						# is used!
	#
	# Various target parameters
	#
	#Wthreads		8		# Number of IO threads
	#QueuedCommands		32		# Number of queued commands

/etc/iet/initiators.allow changed:
iqn.2001-04.com.example:storage.debian ALL
iqn.2001-04.com.example:storage.disk2.sys1.xyz 192.168.122.0/8
iqn.2001-04.com.example:storage.debian-sanboot ALL

-- no debconf information
-------------- next part --------------
Preparing to replace iscsitarget 1.4.20.2-6 (using .../iscsitarget_1.4.20.2-10_amd64.deb) ...
Removing iSCSI enterprise target devices: :.
Unpacking replacement iscsitarget ...
Preparing to replace iscsitarget-dkms 1.4.20.2-6 (using .../iscsitarget-dkms_1.4.20.2-10_all.deb) ...

-------- Uninstall Beginning --------
Module:  iscsitarget
Version: 1.4.20.2
Kernel:  3.0.0-1-amd64 (x86_64)
-------------------------------------

Status: Before uninstall, this module version was ACTIVE on this kernel.

iscsi_trgt.ko:
 - Uninstallation
   - Deleting from: /lib/modules/3.0.0-1-amd64/updates/dkms/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

depmod.........

DKMS: uninstall completed.

------------------------------
Deleting module version: 1.4.20.2
completely from the DKMS tree.
------------------------------
Done.
Unpacking replacement iscsitarget-dkms ...
Preparing to replace iso-codes 3.28-1 (using .../iso-codes_3.33-1_all.deb) ...

and later....

Setting up iscsitarget (1.4.20.2-10) ...
Installing new version of config file /etc/init.d/iscsitarget ...
iscsitarget not enabled in "/etc/default/iscsitarget", not starting... ... (warning).
Setting up iscsitarget-dkms (1.4.20.2-10) ...

Creating symlink /var/lib/dkms/iscsitarget/1.4.20.2/source ->
                 /usr/src/iscsitarget-1.4.20.2

DKMS: add completed.

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area....
make KERNELRELEASE=3.0.0-1-amd64 -C /lib/modules/3.0.0-1-amd64/build M=/var/lib/dkms/iscsitarget/1.4.20.2/build.........
cleaning build area....

DKMS: build completed.

iscsi_trgt:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/3.0.0-1-amd64/updates/dkms/

depmod....

DKMS: install completed.
Setting up iso-codes (3.33-1) ...
Setting up libglib2.0-data (2.30.2-6) ...
Setting up libsgutils2-2 (1.33-1) ...