rev 4389 - in kde-extras/kvpnc/trunk/debian: . patches
Fathi Boudra
fboudra-guest at costa.debian.org
Wed Aug 23 22:09:28 UTC 2006
Author: fboudra-guest
Date: 2006-08-23 22:09:27 +0000 (Wed, 23 Aug 2006)
New Revision: 4389
Added:
kde-extras/kvpnc/trunk/debian/patches/10_su-to-root_usage.diff
Removed:
kde-extras/kvpnc/trunk/debian/manpages
kde-extras/kvpnc/trunk/debian/patches/03_libtool_update.diff
kde-extras/kvpnc/trunk/debian/patches/10_desktop_path.diff
kde-extras/kvpnc/trunk/debian/patches/11_su-to-root_usage.diff
Modified:
kde-extras/kvpnc/trunk/debian/changelog
kde-extras/kvpnc/trunk/debian/control
kde-extras/kvpnc/trunk/debian/patches/02_autotools_update.diff
kde-extras/kvpnc/trunk/debian/rules
Log:
update, tests and built using kvpnc 0.8.6-rc3
Modified: kde-extras/kvpnc/trunk/debian/changelog
===================================================================
--- kde-extras/kvpnc/trunk/debian/changelog 2006-08-23 09:41:58 UTC (rev 4388)
+++ kde-extras/kvpnc/trunk/debian/changelog 2006-08-23 22:09:27 UTC (rev 4389)
@@ -1,15 +1,13 @@
-kvpnc (0.8.6-1) UNRELEASED; urgency=low
+kvpnc (0.8.6-rc3-1) UNRELEASED; urgency=low
- * (NOT RELEASED YET) New upstream release
+ * New upstream release
+ * Add menu in Depends (Closes: #372960)
+ * Replace manpage by DEB_INSTALL_MANPAGES rules
+ * Remove libtool update patch, not needed since admin dir update
+ * Remove desktop path patch, replaced by entries in rules
- -- Fathi Boudra <fboudra at free.fr> Mon, 21 Aug 2006 10:43:43 +0200
+ -- Fathi Boudra <fboudra at free.fr> Wed, 23 Aug 2006 14:19:08 +0200
-kvpnc (0.8.5.1-2) UNRELEASED; urgency=low
-
- * NOT RELEASED YET
-
- -- Mark Purcell <msp at debian.org> Wed, 24 May 2006 20:44:43 +0100
-
kvpnc (0.8.5.1-1) unstable; urgency=low
* New upstream release
Modified: kde-extras/kvpnc/trunk/debian/control
===================================================================
--- kde-extras/kvpnc/trunk/debian/control 2006-08-23 09:41:58 UTC (rev 4388)
+++ kde-extras/kvpnc/trunk/debian/control 2006-08-23 22:09:27 UTC (rev 4389)
@@ -3,12 +3,14 @@
Priority: optional
Maintainer: Debian KDE Extras Team <pkg-kde-extras at lists.alioth.debian.org>
Uploaders: Fathi Boudra <fboudra at free.fr>, Mark Purcell <msp at debian.org>
-Build-Depends: cdbs, debhelper (>= 5.0.0), automake1.7, kdelibs4-dev, libgcrypt11-dev
+Build-Depends: cdbs, debhelper (>= 5), automake1.7, kdelibs4-dev,
+ libgcrypt11-dev
Standards-Version: 3.7.2
Package: kvpnc
Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, kdebase-bin | gksu | sux, module-init-tools | modutils, net-tools, psmisc
+Depends: ${shlibs:Depends}, ${misc:Depends}, menu, net-tools, psmisc,
+ kdebase-bin | gksu | sux, module-init-tools | modutils
Suggests: iptables, openssl, openvpn, racoon, vpnc, pptp-linux, openswan
Description: vpn clients frontend for KDE
KVpnc is a KDE frontend for various vpn clients.
Deleted: kde-extras/kvpnc/trunk/debian/manpages
Modified: kde-extras/kvpnc/trunk/debian/patches/02_autotools_update.diff
===================================================================
--- kde-extras/kvpnc/trunk/debian/patches/02_autotools_update.diff 2006-08-23 09:41:58 UTC (rev 4388)
+++ kde-extras/kvpnc/trunk/debian/patches/02_autotools_update.diff 2006-08-23 22:09:27 UTC (rev 4389)
@@ -1,1095 +1,66 @@
-diff -Nrua a/admin/compile b/admin/compile
---- a/admin/compile 2004-05-12 10:46:31.000000000 +0200
-+++ b/admin/compile 2006-04-09 15:15:49.000000000 +0200
-@@ -1,8 +1,9 @@
- #! /bin/sh
--
- # Wrapper for compilers which do not understand `-c -o'.
-
--# Copyright 1999, 2000 Free Software Foundation, Inc.
-+scriptversion=2005-05-14.22
-+
-+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
- # Written by Tom Tromey <tromey at cygnus.com>.
- #
- # This program is free software; you can redistribute it and/or modify
-@@ -17,83 +18,125 @@
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
- # As a special exception to the GNU General Public License, if you
- # distribute this file as part of a program that contains a
- # configuration script generated by Autoconf, you may include it under
- # the same distribution terms that you use for the rest of that program.
-
--# Usage:
--# compile PROGRAM [ARGS]...
--# `-o FOO.o' is removed from the args passed to the actual compile.
--
--prog=$1
--shift
-+# This file is maintained in Automake, please report
-+# bugs to <bug-automake at gnu.org> or send patches to
-+# <automake-patches at gnu.org>.
-+
-+case $1 in
-+ '')
-+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
-+ exit 1;
-+ ;;
-+ -h | --h*)
-+ cat <<\EOF
-+Usage: compile [--help] [--version] PROGRAM [ARGS]
-+
-+Wrapper for compilers which do not understand `-c -o'.
-+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
-+arguments, and rename the output as expected.
-+
-+If you are trying to build a whole package this is not the
-+right script to run: please start by reading the file `INSTALL'.
-+
-+Report bugs to <bug-automake at gnu.org>.
-+EOF
-+ exit $?
-+ ;;
-+ -v | --v*)
-+ echo "compile $scriptversion"
-+ exit $?
-+ ;;
-+esac
-
- ofile=
- cfile=
--args=
--while test $# -gt 0; do
-- case "$1" in
-- -o)
-- # configure might choose to run compile as `compile cc -o foo foo.c'.
-- # So we do something ugly here.
-- ofile=$2
-- shift
-- case "$ofile" in
-- *.o | *.obj)
-- ;;
-- *)
-- args="$args -o $ofile"
-- ofile=
-- ;;
-- esac
-- ;;
-- *.c)
-- cfile=$1
-- args="$args $1"
-- ;;
-- *)
-- args="$args $1"
-- ;;
-- esac
-- shift
-+eat=
-+
-+for arg
-+do
-+ if test -n "$eat"; then
-+ eat=
-+ else
-+ case $1 in
-+ -o)
-+ # configure might choose to run compile as `compile cc -o foo foo.c'.
-+ # So we strip `-o arg' only if arg is an object.
-+ eat=1
-+ case $2 in
-+ *.o | *.obj)
-+ ofile=$2
-+ ;;
-+ *)
-+ set x "$@" -o "$2"
-+ shift
-+ ;;
-+ esac
-+ ;;
-+ *.c)
-+ cfile=$1
-+ set x "$@" "$1"
-+ shift
-+ ;;
-+ *)
-+ set x "$@" "$1"
-+ shift
-+ ;;
-+ esac
-+ fi
-+ shift
- done
-
- if test -z "$ofile" || test -z "$cfile"; then
-- # If no `-o' option was seen then we might have been invoked from a
-- # pattern rule where we don't need one. That is ok -- this is a
-- # normal compilation that the losing compiler can handle. If no
-- # `.c' file was seen then we are probably linking. That is also
-- # ok.
-- exec "$prog" $args
-+ # If no `-o' option was seen then we might have been invoked from a
-+ # pattern rule where we don't need one. That is ok -- this is a
-+ # normal compilation that the losing compiler can handle. If no
-+ # `.c' file was seen then we are probably linking. That is also
-+ # ok.
-+ exec "$@"
- fi
-
- # Name of file we expect compiler to create.
--cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
-+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
-
- # Create the lock directory.
- # Note: use `[/.-]' here to ensure that we don't use the same name
- # that we are using for the .o file. Also, base the name on the expected
- # object file name, since that is what matters with a parallel build.
--lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
-+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
- while true; do
-- if mkdir $lockdir > /dev/null 2>&1; then
-- break
-- fi
-- sleep 1
-+ if mkdir "$lockdir" >/dev/null 2>&1; then
-+ break
-+ fi
-+ sleep 1
- done
- # FIXME: race condition here if user kills between mkdir and trap.
--trap "rmdir $lockdir; exit 1" 1 2 15
-+trap "rmdir '$lockdir'; exit 1" 1 2 15
-
- # Run the compile.
--"$prog" $args
--status=$?
-+"$@"
-+ret=$?
-
- if test -f "$cofile"; then
-- mv "$cofile" "$ofile"
-+ mv "$cofile" "$ofile"
-+elif test -f "${cofile}bj"; then
-+ mv "${cofile}bj" "$ofile"
- fi
-
--rmdir $lockdir
--exit $status
-+rmdir "$lockdir"
-+exit $ret
-+
-+# Local Variables:
-+# mode: shell-script
-+# sh-indentation: 2
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "scriptversion="
-+# time-stamp-format: "%:y-%02m-%02d.%02H"
-+# time-stamp-end: "$"
-+# End:
-diff -Nrua a/admin/depcomp b/admin/depcomp
---- a/admin/depcomp 2004-05-12 10:46:31.000000000 +0200
-+++ b/admin/depcomp 2006-04-09 15:15:49.000000000 +0200
-@@ -1,7 +1,9 @@
- #! /bin/sh
--
- # depcomp - compile a program generating dependencies as side-effects
--# Copyright 1999, 2000 Free Software Foundation, Inc.
-+
-+scriptversion=2005-07-09.11
-+
-+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-
- # This program is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
-@@ -15,8 +17,8 @@
-
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-+# 02110-1301, USA.
-
- # As a special exception to the GNU General Public License, if you
- # distribute this file as part of a program that contains a
-@@ -25,13 +27,45 @@
-
- # Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
-
-+case $1 in
-+ '')
-+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
-+ exit 1;
-+ ;;
-+ -h | --h*)
-+ cat <<\EOF
-+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-+
-+Run PROGRAMS ARGS to compile a file, generating dependencies
-+as side-effects.
-+
-+Environment variables:
-+ depmode Dependency tracking mode.
-+ source Source file read by `PROGRAMS ARGS'.
-+ object Object file output by `PROGRAMS ARGS'.
-+ DEPDIR directory where to store dependencies.
-+ depfile Dependency file to output.
-+ tmpdepfile Temporary file to use when outputing dependencies.
-+ libtool Whether libtool is used (yes/no).
-+
-+Report bugs to <bug-automake at gnu.org>.
-+EOF
-+ exit $?
-+ ;;
-+ -v | --v*)
-+ echo "depcomp $scriptversion"
-+ exit $?
-+ ;;
-+esac
-+
- if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
- fi
--# `libtool' can also be set to `yes' or `no'.
-
--depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
-+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-+depfile=${depfile-`echo "$object" |
-+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
- tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
- rm -f "$tmpdepfile"
-@@ -163,19 +197,25 @@
-
- aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
-- # in a .u file. This file always lives in the current directory.
-- # Also, the AIX compiler puts `$object:' at the start of each line;
-- # $object doesn't have directory information.
-- stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
-+ # in a .u file. In older versions, this file always lives in the
-+ # current directory. Also, the AIX compiler puts `$object:' at the
-+ # start of each line; $object doesn't have directory information.
-+ # Version 6 uses the directory in both cases.
-+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
-- outname="$stripped.o"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
--
- stat=$?
-+
-+ if test -f "$tmpdepfile"; then :
-+ else
-+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
-+ tmpdepfile="$stripped.u"
-+ fi
-+
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
-@@ -183,6 +223,7 @@
- fi
-
- if test -f "$tmpdepfile"; then
-+ outname="$stripped.o"
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
-@@ -198,11 +239,9 @@
- ;;
-
- icc)
-- # Must come before tru64.
--
-- # Intel's C compiler understands `-MD -MF file'. However
-+ # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-- # will fill foo.d with something like
-+ # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
-@@ -210,6 +249,12 @@
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
-+ # ICC 7.1 will output
-+ # foo.o: sub/foo.c sub/foo.h
-+ # and will wrap long lines using \ :
-+ # foo.o: sub/foo.c ... \
-+ # sub/foo.h ... \
-+ # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
-@@ -219,45 +264,70 @@
- exit $stat
- fi
- rm -f "$depfile"
-- # Each line is of the form `foo.o: dependent.h'.
-+ # Each line is of the form `foo.o: dependent.h',
-+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
-- sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-- sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-+ # Some versions of the HPUX 10.20 sed can't process this invocation
-+ # correctly. Breaking it into two sed invocations is a workaround.
-+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-+ sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
- tru64)
-- # The Tru64 AIX compiler uses -MD to generate dependencies as a side
-+ # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
-+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-+ test "x$dir" = "x$object" && dir=
-+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-- tmpdepfile1="$object.d"
-- tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'`
- if test "$libtool" = yes; then
-+ # With Tru64 cc, shared objects can also be used to make a
-+ # static library. This mecanism is used in libtool 1.4 series to
-+ # handle both shared and static libraries in a single compilation.
-+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-+ #
-+ # With libtool 1.5 this exception was removed, and libtool now
-+ # generates 2 separate objects for the 2 libraries. These two
-+ # compilations output dependencies in in $dir.libs/$base.o.d and
-+ # in $dir$base.o.d. We have to check for both files, because
-+ # one of the two compilations can be disabled. We should prefer
-+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-+ # automatically cleaned when .libs/ is deleted, while ignoring
-+ # the former would cause a distcleancheck panic.
-+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
-+ tmpdepfile2=$dir$base.o.d # libtool 1.5
-+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
-+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
-+ tmpdepfile1=$dir$base.o.d
-+ tmpdepfile2=$dir$base.d
-+ tmpdepfile3=$dir$base.d
-+ tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
-- rm -f "$tmpdepfile1" "$tmpdepfile2"
-+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
-- if test -f "$tmpdepfile1"; then
-- tmpdepfile="$tmpdepfile1"
-- else
-- tmpdepfile="$tmpdepfile2"
-- fi
-+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-+ do
-+ test -f "$tmpdepfile" && break
-+ done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-- # That's a space and a tab in the [].
-- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-+ # That's a tab and a space in the [].
-+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
-@@ -270,34 +340,42 @@
-
- dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
-- # always write the proprocessed file to stdout, regardless of -o,
-- # because we must use -o when running libtool.
-- test -z "$dashmflag" && dashmflag=-M
-- ( IFS=" "
-- case " $* " in
-- *" --mode=compile "*) # this is libtool, let us make it quiet
-- for arg
-- do # cycle over the arguments
-- case "$arg" in
-- "--mode=compile")
-- # insert --quiet before "--mode=compile"
-- set fnord "$@" --quiet
-- shift # fnord
-- ;;
-- esac
-- set fnord "$@" "$arg"
-- shift # fnord
-- shift # "$arg"
-- done
-+ # always write the preprocessed file to stdout, regardless of -o.
-+ "$@" || exit $?
-+
-+ # Remove the call to Libtool.
-+ if test "$libtool" = yes; then
-+ while test $1 != '--mode=compile'; do
-+ shift
-+ done
-+ shift
-+ fi
-+
-+ # Remove `-o $object'.
-+ IFS=" "
-+ for arg
-+ do
-+ case $arg in
-+ -o)
-+ shift
-+ ;;
-+ $object)
-+ shift
-+ ;;
-+ *)
-+ set fnord "$@" "$arg"
-+ shift # fnord
-+ shift # $arg
- ;;
- esac
-- "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
-- ) &
-- proc=$!
-- "$@"
-- stat=$?
-- wait "$proc"
-- if test "$stat" != 0; then exit $stat; fi
-+ done
-+
-+ test -z "$dashmflag" && dashmflag=-M
-+ # Require at least two characters before searching for `:'
-+ # in the target name. This is to cope with DOS-style filenames:
-+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-+ "$@" $dashmflag |
-+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-@@ -315,36 +393,40 @@
- ;;
-
- makedepend)
-- # X makedepend
-- (
-- shift
-- cleared=no
-- for arg in "$@"; do
-- case $cleared in no)
-- set ""; shift
-- cleared=yes
-- esac
-- case "$arg" in
-- -D*|-I*)
-- set fnord "$@" "$arg"; shift;;
-- -*)
-- ;;
-- *)
-- set fnord "$@" "$arg"; shift;;
-- esac
-+ "$@" || exit $?
-+ # Remove any Libtool call
-+ if test "$libtool" = yes; then
-+ while test $1 != '--mode=compile'; do
-+ shift
- done
-- obj_suffix="`echo $object | sed 's/^.*\././'`"
-- touch "$tmpdepfile"
-- ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
-- ) &
-- proc=$!
-- "$@"
-- stat=$?
-- wait "$proc"
-- if test "$stat" != 0; then exit $stat; fi
-+ shift
-+ fi
-+ # X makedepend
-+ shift
-+ cleared=no
-+ for arg in "$@"; do
-+ case $cleared in
-+ no)
-+ set ""; shift
-+ cleared=yes ;;
-+ esac
-+ case "$arg" in
-+ -D*|-I*)
-+ set fnord "$@" "$arg"; shift ;;
-+ # Strip any option that makedepend may not understand. Remove
-+ # the object too, otherwise makedepend will parse it as a source file.
-+ -*|$object)
-+ ;;
-+ *)
-+ set fnord "$@" "$arg"; shift ;;
-+ esac
-+ done
-+ obj_suffix="`echo $object | sed 's/^.*\././'`"
-+ touch "$tmpdepfile"
-+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
-- tail +3 "$tmpdepfile" | tr ' ' '
-+ sed '1,2d' "$tmpdepfile" | tr ' ' '
- ' | \
- ## Some versions of the HPUX 10.20 sed can't process this invocation
- ## correctly. Breaking it into two sed invocations is a workaround.
-@@ -354,35 +436,40 @@
-
- cpp)
- # Important note: in order to support this mode, a compiler *must*
-- # always write the proprocessed file to stdout, regardless of -o,
-- # because we must use -o when running libtool.
-- ( IFS=" "
-- case " $* " in
-- *" --mode=compile "*)
-- for arg
-- do # cycle over the arguments
-- case $arg in
-- "--mode=compile")
-- # insert --quiet before "--mode=compile"
-- set fnord "$@" --quiet
-- shift # fnord
-- ;;
-- esac
-- set fnord "$@" "$arg"
-- shift # fnord
-- shift # "$arg"
-- done
-+ # always write the preprocessed file to stdout.
-+ "$@" || exit $?
-+
-+ # Remove the call to Libtool.
-+ if test "$libtool" = yes; then
-+ while test $1 != '--mode=compile'; do
-+ shift
-+ done
-+ shift
-+ fi
-+
-+ # Remove `-o $object'.
-+ IFS=" "
-+ for arg
-+ do
-+ case $arg in
-+ -o)
-+ shift
-+ ;;
-+ $object)
-+ shift
-+ ;;
-+ *)
-+ set fnord "$@" "$arg"
-+ shift # fnord
-+ shift # $arg
- ;;
- esac
-- "$@" -E |
-- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-+ done
-+
-+ "$@" -E |
-+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
-- ) &
-- proc=$!
-- "$@"
-- stat=$?
-- wait "$proc"
-- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
-@@ -392,34 +479,27 @@
-
- msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
-- # always write the proprocessed file to stdout, regardless of -o,
-+ # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
-- ( IFS=" "
-- case " $* " in
-- *" --mode=compile "*)
-- for arg
-- do # cycle over the arguments
-- case $arg in
-- "--mode=compile")
-- # insert --quiet before "--mode=compile"
-- set fnord "$@" --quiet
-- shift # fnord
-- ;;
-- esac
-+ "$@" || exit $?
-+ IFS=" "
-+ for arg
-+ do
-+ case "$arg" in
-+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-+ set fnord "$@"
-+ shift
-+ shift
-+ ;;
-+ *)
- set fnord "$@" "$arg"
-- shift # fnord
-- shift # "$arg"
-- done
-- ;;
-+ shift
-+ shift
-+ ;;
- esac
-- "$@" -E |
-- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-- ) &
-- proc=$!
-- "$@"
-- stat=$?
-- wait "$proc"
-- if test "$stat" != 0; then exit $stat; fi
-+ done
-+ "$@" -E |
-+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
-@@ -439,3 +519,12 @@
- esac
-
- exit 0
-+
-+# Local Variables:
-+# mode: shell-script
-+# sh-indentation: 2
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "scriptversion="
-+# time-stamp-format: "%:y-%02m-%02d.%02H"
-+# time-stamp-end: "$"
-+# End:
diff -Nrua a/admin/install-sh b/admin/install-sh
---- a/admin/install-sh 2004-05-12 10:46:32.000000000 +0200
-+++ b/admin/install-sh 2006-04-09 15:15:49.000000000 +0200
-@@ -1,19 +1,38 @@
+--- a/admin/install-sh 2006-02-27 10:56:01.000000000 +0100
++++ b/admin/install-sh 2006-08-23 22:49:54.000000000 +0200
+@@ -1,7 +1,7 @@
#!/bin/sh
--#
# install - install a program, script, or datafile
--# This comes from X11R5 (mit/util/scripts/install.sh).
-+
+
+-scriptversion=2005-11-07.23
+scriptversion=2005-05-14.22
-+
-+# This originates from X11R5 (mit/util/scripts/install.sh), which was
-+# later released in X11R6 (xc/config/util/install.sh) with the
-+# following copyright and license.
-+#
-+# Copyright (C) 1994 X Consortium
-+#
-+# Permission is hereby granted, free of charge, to any person obtaining a copy
-+# of this software and associated documentation files (the "Software"), to
-+# deal in the Software without restriction, including without limitation the
-+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-+# sell copies of the Software, and to permit persons to whom the Software is
-+# furnished to do so, subject to the following conditions:
-+#
-+# The above copyright notice and this permission notice shall be included in
-+# all copies or substantial portions of the Software.
- #
--# Copyright 1991 by the Massachusetts Institute of Technology
-+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- #
--# Permission to use, copy, modify, distribute, and sell this software and its
--# documentation for any purpose is hereby granted without fee, provided that
--# the above copyright notice appear in all copies and that both that
--# copyright notice and this permission notice appear in supporting
--# documentation, and that the name of M.I.T. not be used in advertising or
--# publicity pertaining to distribution of the software without specific,
--# written prior permission. M.I.T. makes no representations about the
--# suitability of this software for any purpose. It is provided "as is"
--# without express or implied warranty.
-+# Except as contained in this notice, the name of the X Consortium shall not
-+# be used in advertising or otherwise to promote the sale, use or other deal-
-+# ings in this Software without prior written authorization from the X Consor-
-+# tium.
-+#
-+#
-+# FSF changes to this file are in the public domain.
- #
- # Calling this script install-sh is preferred over install.sh, to prevent
- # `make' implicit rules from creating a file called install from it
-@@ -23,13 +42,11 @@
- # from scratch. It can only install one file at a time, a restriction
- # shared with many OS's install programs.
--
- # set DOITPROG to echo to test this script
-
- # Don't use :- since 4.3BSD and earlier shells don't like it.
- doit="${DOITPROG-}"
-
--
- # put in absolute paths if you don't have them in your path; or use env. vars.
-
- mvprog="${MVPROG-mv}"
-@@ -41,236 +58,266 @@
+ # This originates from X11R5 (mit/util/scripts/install.sh), which was
+ # later released in X11R6 (xc/config/util/install.sh) with the
+@@ -58,21 +58,7 @@
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
--transformbasename=""
--transform_arg=""
--instcmd="$mvprog"
- chmodcmd="$chmodprog 0755"
--chowncmd=""
--chgrpcmd=""
--stripcmd=""
-+chowncmd=
-+chgrpcmd=
-+stripcmd=
- rmcmd="$rmprog -f"
- mvcmd="$mvprog"
--src=""
--dst=""
--dir_arg=""
+-posix_glob=
+-posix_mkdir=
-
--while [ x"$1" != x ]; do
-- case $1 in
-- -c) instcmd=$cpprog
-- shift
-- continue;;
+-# Symbolic mode for testing mkdir with directories.
+-# It is the same as 755, but also tests that "u+" works.
+-test_mode=u=rwx,g=rx,o=rx,u+wx
-
-- -d) dir_arg=true
-- shift
-- continue;;
+-# Desired mode of installed file.
+-mode=0755
-
-- -m) chmodcmd="$chmodprog $2"
-- shift
-- shift
-- continue;;
+-# Desired mode of newly created intermediate directories.
+-# It is empty if not known yet.
+-intermediate_mode=
-
-- -o) chowncmd="$chownprog $2"
-- shift
-- shift
-- continue;;
--
-- -g) chgrpcmd="$chgrpprog $2"
-- shift
-- shift
-- continue;;
--
-- -s) stripcmd=$stripprog
-- shift
-- continue;;
--
-- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
-- shift
-- continue;;
--
-- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-- shift
-- continue;;
--
-- *) if [ x"$src" = x ]
-- then
-- src=$1
-- else
-- # this colon is to work around a 386BSD /bin/sh bug
-- :
-- dst=$1
-- fi
-- shift
-- continue;;
-- esac
--done
-+src=
-+dst=
-+dir_arg=
-+dstarg=
-+no_target_directory=
-+
-+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-+ or: $0 [OPTION]... SRCFILES... DIRECTORY
-+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-+ or: $0 [OPTION]... -d DIRECTORIES...
-+
-+In the 1st form, copy SRCFILE to DSTFILE.
-+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-+In the 4th, create DIRECTORIES.
-+
-+Options:
-+-c (ignored)
-+-d create directories instead of installing files.
-+-g GROUP $chgrpprog installed files to GROUP.
-+-m MODE $chmodprog installed files to MODE.
-+-o USER $chownprog installed files to USER.
-+-s $stripprog installed files.
-+-t DIRECTORY install into DIRECTORY.
-+-T report an error if DSTFILE is a directory.
-+--help display this help and exit.
-+--version display version info and exit.
-+
-+Environment variables override the default commands:
-+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-+"
-+
-+while test -n "$1"; do
-+ case $1 in
-+ -c) shift
-+ continue;;
-+
-+ -d) dir_arg=true
-+ shift
-+ continue;;
-+
-+ -g) chgrpcmd="$chgrpprog $2"
-+ shift
-+ shift
-+ continue;;
-+
-+ --help) echo "$usage"; exit $?;;
-+
-+ -m) chmodcmd="$chmodprog $2"
-+ shift
-+ shift
-+ continue;;
-+
-+ -o) chowncmd="$chownprog $2"
-+ shift
-+ shift
-+ continue;;
-+
-+ -s) stripcmd=$stripprog
-+ shift
-+ continue;;
+-chmodcmd=$chmodprog
++chmodcmd="$chmodprog 0755"
+ chowncmd=
+ chgrpcmd=
+ stripcmd=
+@@ -125,7 +111,7 @@
--if [ x"$src" = x ]
--then
-- echo "$0: no input file specified" >&2
-- exit 1
--else
-- :
--fi
--
--if [ x"$dir_arg" != x ]; then
-- dst=$src
-- src=""
--
-- if [ -d "$dst" ]; then
-- instcmd=:
-- chmodcmd=""
-- else
-- instcmd=$mkdirprog
-- fi
--else
--
--# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
--# might cause directories to be created, which would be especially bad
--# if $src (and thus $dsttmp) contains '*'.
--
-- if [ -f "$src" ] || [ -d "$src" ]
-- then
-- :
-- else
-- echo "$0: $src does not exist" >&2
-- exit 1
-- fi
--
-- if [ x"$dst" = x ]
-- then
-- echo "$0: no destination specified" >&2
-- exit 1
-- else
-- :
-- fi
--
--# If destination is a directory, append the input filename; if your system
--# does not like double slashes in filenames, you may need to add some logic
--
-- if [ -d "$dst" ]
-- then
-- dst=$dst/`basename "$src"`
-- else
-- :
-- fi
--fi
--
--## this sed command emulates the dirname command
--dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
--
--# Make sure that the destination directory exists.
--# this part is taken from Noah Friedman's mkinstalldirs script
--
--# Skip lots of stat calls in the usual case.
--if [ ! -d "$dstdir" ]; then
--defaultIFS='
-- '
--IFS="${IFS-$defaultIFS}"
--
--oIFS=$IFS
--# Some sh's can't handle IFS=/ for some reason.
--IFS='%'
--set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
--IFS=$oIFS
--
--pathcomp=''
-+ -t) dstarg=$2
-+ shift
-+ shift
-+ continue;;
+ --help) echo "$usage"; exit $?;;
--while [ $# -ne 0 ] ; do
-- pathcomp=$pathcomp$1
-+ -T) no_target_directory=true
- shift
-+ continue;;
+- -m) mode=$2
++ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+@@ -178,8 +164,6 @@
+ exit 0
+ fi
-- if [ ! -d "$pathcomp" ] ;
-- then
-- $mkdirprog "$pathcomp"
-- else
-- :
-- fi
-+ --version) echo "$0 $scriptversion"; exit $?;;
-
-- pathcomp=$pathcomp/
-+ *) # When -d is used, all remaining arguments are directories to create.
-+ # When -t is used, the destination is already specified.
-+ test -n "$dir_arg$dstarg" && break
-+ # Otherwise, the last argument is the destination. Remove it from $@.
-+ for arg
-+ do
-+ if test -n "$dstarg"; then
-+ # $@ is not empty: it contains at least $arg.
-+ set fnord "$@" "$dstarg"
-+ shift # fnord
-+ fi
-+ shift # arg
-+ dstarg=$arg
-+ done
-+ break;;
-+ esac
- done
--fi
+-test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
-
--if [ x"$dir_arg" != x ]
--then
-- $doit $instcmd "$dst" &&
+ for src
+ do
+ # Protect names starting with `-'.
+@@ -189,11 +173,15 @@
-- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
--else
--
--# If we're going to rename the final executable, determine the name now.
--
-- if [ x"$transformarg" = x ]
-- then
-- dstfile=`basename "$dst"`
-- else
-- dstfile=`basename "$dst" $transformbasename |
-- sed $transformarg`$transformbasename
-- fi
--
--# don't allow the sed command to completely eliminate the filename
--
-- if [ x"$dstfile" = x ]
-- then
-- dstfile=`basename "$dst"`
-- else
-- :
-- fi
--
--# Make a couple of temp file names in the proper directory.
--
-- dsttmp=$dstdir/#inst.$$#
-- rmtmp=$dstdir/#rm.$$#
--
--# Trap to clean up temp files at exit.
--
-- trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-- trap '(exit $?); exit' 1 2 13 15
--
--# Move or copy the file name to the temp name
--
-- $doit $instcmd "$src" "$dsttmp" &&
--
--# and set any options; do chmod last to preserve setuid bits
--
--# If any of these fail, we abort the whole thing. If we want to
--# ignore errors from any of these, just make sure not to ignore
--# errors from the above "$doit $instcmd $src $dsttmp" command.
--
-- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
--
--# Now remove or move aside any old file at destination location. We try this
--# two ways since rm can't unlink itself on some systems and the destination
--# file might be busy for other reasons. In this case, the final cleanup
--# might fail but the new file should still install successfully.
--
--{
-- if [ -f "$dstdir/$dstfile" ]
-- then
-- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-- $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-- {
-- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-- (exit 1); exit
-- }
-- else
-- :
-- fi
--} &&
--
--# Now rename the file to the real destination.
-+if test -z "$1"; then
-+ if test -z "$dir_arg"; then
-+ echo "$0: no input file specified." >&2
-+ exit 1
-+ fi
-+ # It's OK to call `install-sh -d' without argument.
-+ # This can happen when creating conditional directories.
-+ exit 0
-+fi
-
-- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-+for src
-+do
-+ # Protect names starting with `-'.
-+ case $src in
-+ -*) src=./$src ;;
-+ esac
-+
-+ if test -n "$dir_arg"; then
-+ dst=$src
+ if test -n "$dir_arg"; then
+ dst=$src
+- dstdir=$dst
+- test -d "$dstdir"
+- dstdir_status=$?
+- else
+ src=
-+
+
+ if test -d "$dst"; then
+ mkdircmd=:
+ chmodcmd=
@@ -1097,42 +68,58 @@
+ mkdircmd=$mkdirprog
+ fi
+ else
-+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-+ # might cause directories to be created, which would be especially bad
-+ # if $src (and thus $dsttmp) contains '*'.
-+ if test ! -f "$src" && test ! -d "$src"; then
-+ echo "$0: $src does not exist." >&2
-+ exit 1
-+ fi
-+
-+ if test -z "$dstarg"; then
-+ echo "$0: no destination specified." >&2
-+ exit 1
-+ fi
-+
-+ dst=$dstarg
-+ # Protect names starting with `-'.
-+ case $dst in
-+ -*) dst=./$dst ;;
-+ esac
-
--fi &&
-+ # If destination is a directory, append the input filename; won't work
-+ # if double slashes aren't ignored.
-+ if test -d "$dst"; then
-+ if test -n "$no_target_directory"; then
-+ echo "$0: $dstarg: Is a directory" >&2
-+ exit 1
-+ fi
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+@@ -220,122 +208,53 @@
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+- dstdir=$dst
+- dst=$dstdir/`basename "$src"`
+- dstdir_status=0
+- else
+- # Prefer dirname, but fall back on a substitute if dirname fails.
+- dstdir=`
+- (dirname "$dst") 2>/dev/null ||
+- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+- X"$dst" : 'X\(//\)[^/]' \| \
+- X"$dst" : 'X\(//\)$' \| \
+- X"$dst" : 'X\(/\)' \| \
+- . : '\(.\)' 2>/dev/null ||
+- echo X"$dst" |
+- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+- /^X\(\/\/\)$/{ s//\1/; q; }
+- /^X\(\/\).*/{ s//\1/; q; }
+- s/.*/./; q'
+- `
+-
+- test -d "$dstdir"
+- dstdir_status=$?
+ dst=$dst/`basename "$src"`
-+ fi
-+ fi
-+
+ fi
+ fi
+
+- obsolete_mkdir_used=false
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-+
+
+- if test $dstdir_status != 0; then
+- case $posix_mkdir in
+- '')
+- posix_mkdir=false
+- if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
+- posix_mkdir=true
+- else
+- # Remove any dirs left behind by ancient mkdir implementations.
+- rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
+- fi ;;
+- esac
+ # Make sure that the destination directory exists.
-+
+
+- if
+- $posix_mkdir && {
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
@@ -1145,12 +132,76 @@
+ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ shift
+ IFS=$oIFS
-+
+
+- # With -d, create the new directory with the user-specified mode.
+- # Otherwise, create it using the same intermediate mode that
+- # mkdir -p would use when creating intermediate directories.
+- # POSIX says that this mode is "$(umask -S),u+wx", so use that
+- # if umask -S works.
+-
+- if test -n "$dir_arg"; then
+- mkdir_mode=$mode
+- else
+- case $intermediate_mode in
+- '')
+- if umask_S=`(umask -S) 2>/dev/null`; then
+- intermediate_mode=$umask_S,u+wx
+- else
+- intermediate_mode=$test_mode
+- fi ;;
+- esac
+- mkdir_mode=$intermediate_mode
+- fi
+-
+- $mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
+- }
+- then :
+- else
+ pathcomp=
-+
+
+- # mkdir does not conform to POSIX, or it failed possibly due to
+- # a race condition. Create the directory the slow way, step by
+- # step, checking for races as we go.
+-
+- case $dstdir in
+- /*) pathcomp=/ ;;
+- -*) pathcomp=./ ;;
+- *) pathcomp= ;;
+- esac
+-
+- case $posix_glob in
+- '')
+- if (set -f) 2>/dev/null; then
+- posix_glob=true
+- else
+- posix_glob=false
+- fi ;;
+- esac
+-
+- oIFS=$IFS
+- IFS=/
+- $posix_glob && set -f
+- set fnord $dstdir
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
-+ shift
+ shift
+- $posix_glob && set +f
+- IFS=$oIFS
+-
+- for d
+- do
+- test "x$d" = x && continue
+-
+- pathcomp=$pathcomp$d
+- if test ! -d "$pathcomp"; then
+- $mkdirprog "$pathcomp"
+- # Don't fail if two instances are running concurrently.
+- test -d "$pathcomp" || exit 1
+- fi
+- pathcomp=$pathcomp/
+- done
+- obsolete_mkdir_used=true
+- fi
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # mkdir can fail with a `File exist' error in case several
@@ -1160,101 +211,101 @@
+ fi
+ pathcomp=$pathcomp/
+ done
-+ fi
-+
-+ if test -n "$dir_arg"; then
+ fi
+
+ if test -n "$dir_arg"; then
+- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+- test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
+ $doit $mkdircmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
-+ else
+ else
+ dstfile=`basename "$dst"`
-+
-+ # Make a couple of temp file names in the proper directory.
-+ dsttmp=$dstdir/_inst.$$_
-+ rmtmp=$dstdir/_rm.$$_
-+
-+ # Trap to clean up those temp files at exit.
-+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+@@ -343,6 +262,7 @@
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+ trap '(exit $?); exit' 1 2 13 15
-+
-+ # Copy the file name to the temp name.
-+ $doit $cpprog "$src" "$dsttmp" &&
-+
-+ # and set any options; do chmod last to preserve setuid bits.
-+ #
-+ # If any of these fail, we abort the whole thing. If we want to
-+ # ignore errors from any of these, just make sure not to ignore
-+ # errors from the above "$doit $cpprog $src $dsttmp" command.
-+ #
-+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+
+ # Copy the file name to the temp name.
+ $doit $cpprog "$src" "$dsttmp" &&
+@@ -356,10 +276,10 @@
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+- && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-+
-+ # Now rename the file to the real destination.
+
+ # Now rename the file to the real destination.
+- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-+ || {
-+ # The rename failed, perhaps because mv can't rename something else
-+ # to itself, or perhaps because mv is so ancient that it does not
-+ # support -f.
-+
-+ # Now remove or move aside any old file at destination location.
-+ # We try this two ways since rm can't unlink itself on some
-+ # systems and the destination file might be busy for other
-+ # reasons. In this case, the final cleanup might fail but the new
-+ # file should still install successfully.
-+ {
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+@@ -371,12 +291,11 @@
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+- if test -f "$dst"; then
+- $doit $rmcmd -f "$dst" 2>/dev/null \
+- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-+ || {
+ || {
+- echo "$0: cannot unlink or rename $dst" >&2
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-+ (exit 1); exit 1
-+ }
-+ else
-+ :
-+ fi
-+ } &&
-+
-+ # Now rename the file to the real destination.
+ (exit 1); exit 1
+ }
+ else
+@@ -385,14 +304,17 @@
+ } &&
+
+ # Now rename the file to the real destination.
+- $doit $mvcmd "$dsttmp" "$dst"
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-+ }
+ }
+- } || exit 1
+-
+- trap '' 0
+- fi
+ }
+ fi || { (exit 1); exit 1; }
-+done
+ done
- # The final little trick to "correctly" pass the exit status to the exit trap.
--
- {
-- (exit 0); exit
++# The final little trick to "correctly" pass the exit status to the exit trap.
++{
+ (exit 0); exit 0
- }
++}
+
-+# Local variables:
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "scriptversion="
-+# time-stamp-format: "%:y-%02m-%02d.%02H"
-+# time-stamp-end: "$"
-+# End:
+ # Local variables:
+ # eval: (add-hook 'write-file-hooks 'time-stamp)
+ # time-stamp-start: "scriptversion="
diff -Nrua a/admin/missing b/admin/missing
---- a/admin/missing 2004-05-12 10:46:32.000000000 +0200
-+++ b/admin/missing 2006-04-09 15:15:49.000000000 +0200
-@@ -1,6 +1,10 @@
+--- a/admin/missing 2006-02-27 10:56:01.000000000 +0100
++++ b/admin/missing 2006-08-23 22:49:54.000000000 +0200
+@@ -1,9 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
--# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-+
+
+-scriptversion=2004-09-07.08
+scriptversion=2005-06-08.21
-+
+
+-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
-+# Free Software Foundation, Inc.
+ # Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
- # This program is free software; you can redistribute it and/or modify
-@@ -15,8 +19,8 @@
+@@ -19,8 +19,8 @@
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
@@ -1265,213 +316,22 @@
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
-@@ -38,18 +42,24 @@
- configure_ac=configure.in
- fi
+@@ -87,12 +87,12 @@
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-+msg="missing on your system"
-+
- case "$1" in
- --run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
-+ # Exit code 63 means version mismatch. This often happens
-+ # when the user try to use an ancient version of a tool on
-+ # a file that requires a minimum version. In this case we
-+ # we should proceed has if the program had been absent, or
-+ # if --run hadn't been passed.
-+ if test $? = 63; then
-+ run=:
-+ msg="probably too old"
-+ fi
- ;;
--esac
--
--# If it does not exist, or fails to run (possibly an outdated version),
--# try to emulate it.
--case "$1" in
-
- -h|--h|--he|--hel|--help)
- echo "\
-@@ -74,11 +84,15 @@
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
-- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
-+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-+
-+Send bug reports to <bug-automake at gnu.org>."
+ Send bug reports to <bug-automake at gnu.org>."
+- exit 0
+ exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-- echo "missing 0.4 - GNU automake"
-+ echo "missing $scriptversion (GNU Automake)"
+ echo "missing $scriptversion (GNU Automake)"
+- exit 0
+ exit $?
;;
-*)
-@@ -87,14 +101,44 @@
- exit 1
- ;;
-
-- aclocal*)
-+esac
-+
-+# Now exit if we have it, but it failed. Also exit now if we
-+# don't have it and --version was passed (most likely to detect
-+# the program).
-+case "$1" in
-+ lex|yacc)
-+ # Not GNU programs, they don't have --version.
-+ ;;
-+
-+ tar)
-+ if test -n "$run"; then
-+ echo 1>&2 "ERROR: \`tar' requires --run"
-+ exit 1
-+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-+ exit 1
-+ fi
-+ ;;
-+
-+ *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
-+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-+ # Could not run --version or --help. This is probably someone
-+ # running `$TOOL --version' or `$TOOL --help' to check whether
-+ # $TOOL exists and not knowing $TOOL uses missing.
-+ exit 1
- fi
-+ ;;
-+esac
-
-+# If it does not exist, or fails to run (possibly an outdated version),
-+# try to emulate it.
-+case "$1" in
-+ aclocal*)
- echo 1>&2 "\
--WARNING: \`$1' is missing on your system. You should only need it if
-+WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
-@@ -102,13 +146,8 @@
- ;;
-
- autoconf)
-- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-- # We have it, but it failed.
-- exit 1
-- fi
--
- echo 1>&2 "\
--WARNING: \`$1' is missing on your system. You should only need it if
-+WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
-@@ -116,13 +155,8 @@
- ;;
-
- autoheader)
-- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-- # We have it, but it failed.
-- exit 1
-- fi
--
- echo 1>&2 "\
--WARNING: \`$1' is missing on your system. You should only need it if
-+WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
-@@ -140,13 +174,8 @@
- ;;
-
- automake*)
-- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-- # We have it, but it failed.
-- exit 1
-- fi
--
- echo 1>&2 "\
--WARNING: \`$1' is missing on your system. You should only need it if
-+WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
-@@ -156,16 +185,11 @@
- ;;
-
- autom4te)
-- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-- # We have it, but it failed.
-- exit 1
-- fi
--
- echo 1>&2 "\
--WARNING: \`$1' is needed, and you do not seem to have it handy on your
-- system. You might have modified some files without having the
-+WARNING: \`$1' is needed, but is $msg.
-+ You might have modified some files without having the
- proper tools for further handling them.
-- You can get \`$1Help2man' as part of \`Autoconf' from any GNU
-+ You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-@@ -185,7 +209,7 @@
-
- bison|yacc)
- echo 1>&2 "\
--WARNING: \`$1' is missing on your system. You should only need it if
-+WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
-@@ -215,7 +239,7 @@
-
- lex|flex)
- echo 1>&2 "\
--WARNING: \`$1' is missing on your system. You should only need it if
-+WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
-@@ -237,13 +261,8 @@
- ;;
-
- help2man)
-- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-- # We have it, but it failed.
-- exit 1
-- fi
--
- echo 1>&2 "\
--WARNING: \`$1' is missing on your system. You should only need it if
-+WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-@@ -262,32 +281,30 @@
- ;;
-
- makeinfo)
-- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-- # We have makeinfo, but it failed.
-- exit 1
-- fi
--
- echo 1>&2 "\
--WARNING: \`$1' is missing on your system. You should only need it if
-+WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
+@@ -288,11 +288,18 @@
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
@@ -1493,493 +353,3 @@
touch $file
;;
- tar)
- shift
-- if test -n "$run"; then
-- echo 1>&2 "ERROR: \`tar' requires --run"
-- exit 1
-- fi
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
-@@ -323,10 +340,10 @@
-
- *)
- echo 1>&2 "\
--WARNING: \`$1' is needed, and you do not seem to have it handy on your
-- system. You might have modified some files without having the
-+WARNING: \`$1' is needed, and is $msg.
-+ You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
-- it often tells you about the needed prerequirements for installing
-+ it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
-@@ -334,3 +351,10 @@
- esac
-
- exit 0
-+
-+# Local variables:
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "scriptversion="
-+# time-stamp-format: "%:y-%02m-%02d.%02H"
-+# time-stamp-end: "$"
-+# End:
-diff -Nrua a/admin/mkinstalldirs b/admin/mkinstalldirs
---- a/admin/mkinstalldirs 2004-05-12 10:46:32.000000000 +0200
-+++ b/admin/mkinstalldirs 2006-04-09 15:15:49.000000000 +0200
-@@ -1,21 +1,33 @@
- #! /bin/sh
- # mkinstalldirs --- make directory hierarchy
--# Author: Noah Friedman <friedman at prep.ai.mit.edu>
-+
-+scriptversion=2005-06-29.22
-+
-+# Original author: Noah Friedman <friedman at prep.ai.mit.edu>
- # Created: 1993-05-16
--# Public domain
-+# Public domain.
-+#
-+# This file is maintained in Automake, please report
-+# bugs to <bug-automake at gnu.org> or send patches to
-+# <automake-patches at gnu.org>.
-
- errstatus=0
--dirmode=""
-+dirmode=
-
- usage="\
--Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-+
-+Create each directory DIR (with mode MODE, if specified), including all
-+leading file name components.
-+
-+Report bugs to <bug-automake at gnu.org>."
-
- # process command line arguments
- while test $# -gt 0 ; do
- case $1 in
- -h | --help | --h*) # -h for help
-- echo "$usage" 1>&2
-- exit 0
-+ echo "$usage"
-+ exit $?
- ;;
- -m) # -m PERM arg
- shift
-@@ -23,6 +35,10 @@
- dirmode=$1
- shift
- ;;
-+ --version)
-+ echo "$0 $scriptversion"
-+ exit $?
-+ ;;
- --) # stop option processing
- shift
- break
-@@ -50,30 +66,58 @@
- 0) exit 0 ;;
- esac
-
-+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
-+# mkdir -p a/c at the same time, both will detect that a is missing,
-+# one will create a, then the other will try to create a and die with
-+# a "File exists" error. This is a problem when calling mkinstalldirs
-+# from a parallel make. We use --version in the probe to restrict
-+# ourselves to GNU mkdir, which is thread-safe.
- case $dirmode in
- '')
-- if mkdir -p -- . 2>/dev/null; then
-+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
-+ else
-+ # On NextStep and OpenStep, the `mkdir' command does not
-+ # recognize any option. It will interpret all options as
-+ # directories to create, and then abort because `.' already
-+ # exists.
-+ test -d ./-p && rmdir ./-p
-+ test -d ./--version && rmdir ./--version
- fi
- ;;
- *)
-- if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
-+ test ! -d ./--version; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
-+ else
-+ # Clean up after NextStep and OpenStep mkdir.
-+ for d in ./-m ./-p ./--version "./$dirmode";
-+ do
-+ test -d $d && rmdir $d
-+ done
- fi
- ;;
- esac
-
- for file
- do
-- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-+ case $file in
-+ /*) pathcomp=/ ;;
-+ *) pathcomp= ;;
-+ esac
-+ oIFS=$IFS
-+ IFS=/
-+ set fnord $file
- shift
-+ IFS=$oIFS
-
-- pathcomp=
- for d
- do
-- pathcomp="$pathcomp$d"
-+ test "x$d" = x && continue
-+
-+ pathcomp=$pathcomp$d
- case $pathcomp in
- -*) pathcomp=./$pathcomp ;;
- esac
-@@ -84,21 +128,21 @@
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
-- errstatus=$lasterr
-+ errstatus=$lasterr
- else
-- if test ! -z "$dirmode"; then
-+ if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
-- lasterr=""
-- chmod "$dirmode" "$pathcomp" || lasterr=$?
-+ lasterr=
-+ chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-- if test ! -z "$lasterr"; then
-- errstatus=$lasterr
-- fi
-- fi
-+ if test ! -z "$lasterr"; then
-+ errstatus=$lasterr
-+ fi
-+ fi
- fi
- fi
-
-- pathcomp="$pathcomp/"
-+ pathcomp=$pathcomp/
- done
- done
-
-@@ -107,5 +151,8 @@
- # Local Variables:
- # mode: shell-script
- # sh-indentation: 2
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "scriptversion="
-+# time-stamp-format: "%:y-%02m-%02d.%02H"
-+# time-stamp-end: "$"
- # End:
--# mkinstalldirs ends here
-diff -Nrua a/admin/ylwrap b/admin/ylwrap
---- a/admin/ylwrap 2004-05-12 10:46:32.000000000 +0200
-+++ b/admin/ylwrap 2006-04-09 15:15:49.000000000 +0200
-@@ -1,6 +1,11 @@
- #! /bin/sh
- # ylwrap - wrapper for lex/yacc invocations.
--# Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
-+
-+scriptversion=2005-05-14.22
-+
-+# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005
-+# Free Software Foundation, Inc.
-+#
- # Written by Tom Tromey <tromey at cygnus.com>.
- #
- # This program is free software; you can redistribute it and/or modify
-@@ -15,51 +20,73 @@
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-+# 02110-1301, USA.
-
- # As a special exception to the GNU General Public License, if you
- # distribute this file as part of a program that contains a
- # configuration script generated by Autoconf, you may include it under
- # the same distribution terms that you use for the rest of that program.
-
--# Usage:
--# ylwrap INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
--# * INPUT is the input file
--# * OUTPUT is file PROG generates
--# * DESIRED is file we actually want
--# * PROGRAM is program to run
--# * ARGS are passed to PROG
--# Any number of OUTPUT,DESIRED pairs may be used.
-+# This file is maintained in Automake, please report
-+# bugs to <bug-automake at gnu.org> or send patches to
-+# <automake-patches at gnu.org>.
-+
-+case "$1" in
-+ '')
-+ echo "$0: No files given. Try \`$0 --help' for more information." 1>&2
-+ exit 1
-+ ;;
-+ --basedir)
-+ basedir=$2
-+ shift 2
-+ ;;
-+ -h|--h*)
-+ cat <<\EOF
-+Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
-+
-+Wrapper for lex/yacc invocations, renaming files as desired.
-+
-+ INPUT is the input file
-+ OUTPUT is one file PROG generates
-+ DESIRED is the file we actually want instead of OUTPUT
-+ PROGRAM is program to run
-+ ARGS are passed to PROG
-+
-+Any number of OUTPUT,DESIRED pairs may be used.
-+
-+Report bugs to <bug-automake at gnu.org>.
-+EOF
-+ exit $?
-+ ;;
-+ -v|--v*)
-+ echo "ylwrap $scriptversion"
-+ exit $?
-+ ;;
-+esac
-+
-
- # The input.
- input="$1"
- shift
- case "$input" in
-- [\\/]* | ?:[\\/]*)
-+ [\\/]* | ?:[\\/]*)
- # Absolute path; do nothing.
- ;;
-- *)
-+ *)
- # Relative path. Make it absolute.
- input="`pwd`/$input"
- ;;
- esac
-
--# The directory holding the input.
--input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
--# Quote $INPUT_DIR so we can use it in a regexp.
--# FIXME: really we should care about more than `.' and `\'.
--input_rx=`echo "$input_dir" | sed -e 's,\\\\,\\\\\\\\,g' -e 's,\\.,\\\\.,g'`
--
--echo "got $input_rx"
--
- pairlist=
- while test "$#" -ne 0; do
-- if test "$1" = "--"; then
-- shift
-- break
-- fi
-- pairlist="$pairlist $1"
-- shift
-+ if test "$1" = "--"; then
-+ shift
-+ break
-+ fi
-+ pairlist="$pairlist $1"
-+ shift
- done
-
- # The program to run.
-@@ -67,8 +94,8 @@
- shift
- # Make any relative path in $prog absolute.
- case "$prog" in
-- [\\/]* | ?:[\\/]*) ;;
-- *[\\/]*) prog="`pwd`/$prog" ;;
-+ [\\/]* | ?:[\\/]*) ;;
-+ *[\\/]*) prog="`pwd`/$prog" ;;
- esac
-
- # FIXME: add hostname here for parallel makes that run commands on
-@@ -79,65 +106,118 @@
-
- cd $dirname
-
--$prog ${1+"$@"} "$input"
--status=$?
-+case $# in
-+ 0) $prog "$input" ;;
-+ *) $prog "$@" "$input" ;;
-+esac
-+ret=$?
-
--if test $status -eq 0; then
-- set X $pairlist
-- shift
-- first=yes
-- # Since DOS filename conventions don't allow two dots,
-- # the DOS version of Bison writes out y_tab.c instead of y.tab.c
-- # and y_tab.h instead of y.tab.h. Test to see if this is the case.
-- y_tab_nodot="no"
-- if test -f y_tab.c || test -f y_tab.h; then
-- y_tab_nodot="yes"
-- fi
--
-- while test "$#" -ne 0; do
-- from="$1"
-- # Handle y_tab.c and y_tab.h output by DOS
-- if test $y_tab_nodot = "yes"; then
-- if test $from = "y.tab.c"; then
-- from="y_tab.c"
-- else
-- if test $from = "y.tab.h"; then
-- from="y_tab.h"
-- fi
-- fi
-- fi
-- if test -f "$from"; then
-- # If $2 is an absolute path name, then just use that,
-- # otherwise prepend `../'.
-- case "$2" in
-- [\\/]* | ?:[\\/]*) target="$2";;
-- *) target="../$2";;
-- esac
--
-- # Edit out `#line' or `#' directives. We don't want the
-- # resulting debug information to point at an absolute srcdir;
-- # it is better for it to just mention the .y file with no
-- # path.
-- sed -e "/^#/ s,$input_rx,," "$from" > "$target" || status=$?
-+if test $ret -eq 0; then
-+ set X $pairlist
-+ shift
-+ first=yes
-+ # Since DOS filename conventions don't allow two dots,
-+ # the DOS version of Bison writes out y_tab.c instead of y.tab.c
-+ # and y_tab.h instead of y.tab.h. Test to see if this is the case.
-+ y_tab_nodot="no"
-+ if test -f y_tab.c || test -f y_tab.h; then
-+ y_tab_nodot="yes"
-+ fi
-+
-+ # The directory holding the input.
-+ input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
-+ # Quote $INPUT_DIR so we can use it in a regexp.
-+ # FIXME: really we should care about more than `.' and `\'.
-+ input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
-+
-+ while test "$#" -ne 0; do
-+ from="$1"
-+ # Handle y_tab.c and y_tab.h output by DOS
-+ if test $y_tab_nodot = "yes"; then
-+ if test $from = "y.tab.c"; then
-+ from="y_tab.c"
- else
-- # A missing file is only an error for the first file. This
-- # is a blatant hack to let us support using "yacc -d". If -d
-- # is not specified, we don't want an error when the header
-- # file is "missing".
-- if test $first = yes; then
-- status=1
-- fi
-+ if test $from = "y.tab.h"; then
-+ from="y_tab.h"
-+ fi
- fi
-- shift
-- shift
-- first=no
-- done
-+ fi
-+ if test -f "$from"; then
-+ # If $2 is an absolute path name, then just use that,
-+ # otherwise prepend `../'.
-+ case "$2" in
-+ [\\/]* | ?:[\\/]*) target="$2";;
-+ *) target="../$2";;
-+ esac
-+
-+ # We do not want to overwrite a header file if it hasn't
-+ # changed. This avoid useless recompilations. However the
-+ # parser itself (the first file) should always be updated,
-+ # because it is the destination of the .y.c rule in the
-+ # Makefile. Divert the output of all other files to a temporary
-+ # file so we can compare them to existing versions.
-+ if test $first = no; then
-+ realtarget="$target"
-+ target="tmp-`echo $target | sed s/.*[\\/]//g`"
-+ fi
-+ # Edit out `#line' or `#' directives.
-+ #
-+ # We don't want the resulting debug information to point at
-+ # an absolute srcdir; it is better for it to just mention the
-+ # .y file with no path.
-+ #
-+ # We want to use the real output file name, not yy.lex.c for
-+ # instance.
-+ #
-+ # We want the include guards to be adjusted too.
-+ FROM=`echo "$from" | sed \
-+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-+ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-+ TARGET=`echo "$2" | sed \
-+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-+ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-+
-+ sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
-+ -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
-+
-+ # Check whether header files must be updated.
-+ if test $first = no; then
-+ if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
-+ echo "$2" is unchanged
-+ rm -f "$target"
-+ else
-+ echo updating "$2"
-+ mv -f "$target" "$realtarget"
-+ fi
-+ fi
-+ else
-+ # A missing file is only an error for the first file. This
-+ # is a blatant hack to let us support using "yacc -d". If -d
-+ # is not specified, we don't want an error when the header
-+ # file is "missing".
-+ if test $first = yes; then
-+ ret=1
-+ fi
-+ fi
-+ shift
-+ shift
-+ first=no
-+ done
- else
-- status=$?
-+ ret=$?
- fi
-
- # Remove the directory.
- cd ..
- rm -rf $dirname
-
--exit $status
-+exit $ret
-+
-+# Local Variables:
-+# mode: shell-script
-+# sh-indentation: 2
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "scriptversion="
-+# time-stamp-format: "%:y-%02m-%02d.%02H"
-+# time-stamp-end: "$"
-+# End:
Deleted: kde-extras/kvpnc/trunk/debian/patches/03_libtool_update.diff
Deleted: kde-extras/kvpnc/trunk/debian/patches/10_desktop_path.diff
Added: kde-extras/kvpnc/trunk/debian/patches/10_su-to-root_usage.diff
===================================================================
--- kde-extras/kvpnc/trunk/debian/patches/10_su-to-root_usage.diff 2006-08-23 09:41:58 UTC (rev 4388)
+++ kde-extras/kvpnc/trunk/debian/patches/10_su-to-root_usage.diff 2006-08-23 22:09:27 UTC (rev 4389)
@@ -0,0 +1,12 @@
+diff -Nur kvpnc-0.8.6/src/kvpnc.desktop kvpnc-0.8.6.new/src/kvpnc.desktop
+--- kvpnc-0.8.6/src/kvpnc.desktop 2006-03-11 05:20:30.000000000 +0100
++++ kvpnc-0.8.6.new/src/kvpnc.desktop 2006-05-18 15:07:44.000000000 +0200
+@@ -18,7 +18,7 @@
+ GenericName[xx]=xxVPN Client GUIxx
+
+ Categories=Network;RemoteAccess;KDE;Qt
+-Exec=kvpnc
++Exec=su-to-root -X -c /usr/bin/kvpnc
+ X-KDE-SubstituteUID=true
+ Icon=kvpnc
+ Type=Application
Deleted: kde-extras/kvpnc/trunk/debian/patches/11_su-to-root_usage.diff
Modified: kde-extras/kvpnc/trunk/debian/rules
===================================================================
--- kde-extras/kvpnc/trunk/debian/rules 2006-08-23 09:41:58 UTC (rev 4388)
+++ kde-extras/kvpnc/trunk/debian/rules 2006-08-23 22:09:27 UTC (rev 4389)
@@ -4,6 +4,8 @@
include /usr/share/cdbs/1/class/kde.mk
include /usr/share/cdbs/1/rules/simple-patchsys.mk
+DEB_INSTALL_MANPAGES_kvpnc := debian/kvpnc.1
+
install/kvpnc::
# fix script-not-executable
chmod 0755 debian/kvpnc/usr/share/apps/kvpnc/ping_check.sh
@@ -11,3 +13,10 @@
# remove uneeded dir
rm -rf debian/kvpnc/usr/share/doc/kde/HTML/kvpnc
+ # install desktop file in applications
+ install -D -p -m0644 src/kvpnc.desktop \
+ debian/kvpnc/usr/share/applications/kde/kvpnc.desktop
+
+binary-post-install/kvpnc::
+ rm -rf debian/kvpnc/usr/share/applnk/
+
More information about the pkg-kde-commits
mailing list