rev 9048 - in kde-extras/kmymoney2/trunk/debian: . patches
Fathi Boudra
fabo at alioth.debian.org
Sat Jan 19 23:12:26 UTC 2008
Author: fabo
Date: 2008-01-19 23:12:25 +0000 (Sat, 19 Jan 2008)
New Revision: 9048
Added:
kde-extras/kmymoney2/trunk/debian/patches/00_admin_dir_update.diff
kde-extras/kmymoney2/trunk/debian/patches/01_libtool.m4.in_update.diff
kde-extras/kmymoney2/trunk/debian/patches/02_autotools_update.diff
kde-extras/kmymoney2/trunk/debian/patches/03_libtool_update.diff
kde-extras/kmymoney2/trunk/debian/patches/04_am_maintainer_mode.diff
kde-extras/kmymoney2/trunk/debian/patches/05_pedantic-errors.diff
kde-extras/kmymoney2/trunk/debian/patches/06_disable_no_undefined.diff
kde-extras/kmymoney2/trunk/debian/patches/07_ofximport_ldflags.diff
kde-extras/kmymoney2/trunk/debian/patches/08_remove_deprecated_miniicon.diff
kde-extras/kmymoney2/trunk/debian/patches/98_buildprep.diff
kde-extras/kmymoney2/trunk/debian/patches/series
Modified:
kde-extras/kmymoney2/trunk/debian/NEWS
kde-extras/kmymoney2/trunk/debian/README.Debian
kde-extras/kmymoney2/trunk/debian/changelog
kde-extras/kmymoney2/trunk/debian/compat
kde-extras/kmymoney2/trunk/debian/control
kde-extras/kmymoney2/trunk/debian/kmymoney2.lintian-overrides
kde-extras/kmymoney2/trunk/debian/menu
kde-extras/kmymoney2/trunk/debian/rules
Log:
* Bump compat to 6.
* Update my e-mail address.
* Bump debhelper to 6.
* Switch to quilt patch system.
* Replace automake1.9 build dependency by automake.
* Add libtool build dependency.
* Bump Standard-Version to 3.7.3.
* Use Homepage field.
* Add Vcs-Browser and Vcs-Svn fields.
* Update lintian override.
* Update menu section to latest Debian menu policy.
* Build with --as-needed linker flag.
* Add clean target. Usefull for create buildprep script.
* Add patches:
* Update admin directory.
* Update libtool.m4.in.
* Fix ofximport plugin LDFLAGS.
* Remove deprecated miniicon entry from desktop file.
Modified: kde-extras/kmymoney2/trunk/debian/NEWS
===================================================================
--- kde-extras/kmymoney2/trunk/debian/NEWS 2008-01-19 18:01:34 UTC (rev 9047)
+++ kde-extras/kmymoney2/trunk/debian/NEWS 2008-01-19 23:12:25 UTC (rev 9048)
@@ -1,17 +1,17 @@
kmymoney2 (0.8.7-1) unstable; urgency=low
* Due to licencing restrictions Debian is not able to distribute kmymoney2
- with HBCI (online banking) enabled, however you are allowed and can
+ with HBCI (online banking) enabled, however you are allowed and can
build your own with HBCI enabled!
# apt-get build-dep kmymoney2
# apt-get install libaqbanking16-dev
- # apt-get -b source kmymoney2
-
+ # apt-get -b source kmymoney2
+
For more information on this issue please refer to:
http://bugs.debian.org/434278
* Debian will endeavour to distribute kmymoney2 with HBCI enabled as
soon as licencing allows.
-
+
-- Mark Purcell <msp at debian.org> Sun, 22 Jul 2007 21:56:30 +0100
Modified: kde-extras/kmymoney2/trunk/debian/README.Debian
===================================================================
--- kde-extras/kmymoney2/trunk/debian/README.Debian 2008-01-19 18:01:34 UTC (rev 9047)
+++ kde-extras/kmymoney2/trunk/debian/README.Debian 2008-01-19 23:12:25 UTC (rev 9048)
@@ -6,12 +6,12 @@
# apt-get build-dep kmymoney2
# apt-get install libaqbanking16-dev
- # apt-get -b source kmymoney2
-
+ # apt-get -b source kmymoney2
+
For more information on this issue please refer to:
http://bugs.debian.org/434278
* Debian will endeavour to distribute kmymoney2 with HBCI enabled as
soon as licencing allows.
-
+
-- Mark Purcell <msp at debian.org> Sun, 22 Jul 2007 21:56:30 +0100
Modified: kde-extras/kmymoney2/trunk/debian/changelog
===================================================================
--- kde-extras/kmymoney2/trunk/debian/changelog 2008-01-19 18:01:34 UTC (rev 9047)
+++ kde-extras/kmymoney2/trunk/debian/changelog 2008-01-19 23:12:25 UTC (rev 9048)
@@ -1,9 +1,31 @@
-kmymoney2 (0.8.7-3) UNRELEASED; urgency=low
+kmymoney2 (0.8.8-1) unstable; urgency=low
- * NOT RELEASED YET
+ * New upstream release. (Closes: #451785, #434278, #455675, #460414)
+
+ [Fathi Boudra]
+ * Bump compat to 6.
+ * Update my e-mail address.
+ * Bump debhelper to 6.
+ * Switch to quilt patch system.
+ * Replace automake1.9 build dependency by automake.
+ * Add libtool build dependency.
+ * Bump Standard-Version to 3.7.3.
+ * Use Homepage field.
+ * Add Vcs-Browser and Vcs-Svn fields.
+ * Update lintian override.
+ * Update menu section to latest Debian menu policy.
+ * Build with --as-needed linker flag.
+ * Add clean target. Usefull for create buildprep script.
+ * Add patches:
+ * Update admin directory.
+ * Update libtool.m4.in.
+ * Fix ofximport plugin LDFLAGS.
+ * Remove deprecated miniicon entry from desktop file.
+
+ [Mark Purcell]
* Remove get-orig-source targets. sf.net sillyness.
- -- Mark Purcell <msp at debian.org> Mon, 06 Aug 2007 21:16:31 +0100
+ -- Fathi Boudra <fabo at debian.org> Sun, 23 Dec 2007 18:00:06 +0100
kmymoney2 (0.8.7-2) unstable; urgency=low
Modified: kde-extras/kmymoney2/trunk/debian/compat
===================================================================
--- kde-extras/kmymoney2/trunk/debian/compat 2008-01-19 18:01:34 UTC (rev 9047)
+++ kde-extras/kmymoney2/trunk/debian/compat 2008-01-19 23:12:25 UTC (rev 9048)
@@ -1 +1 @@
-5
+6
Modified: kde-extras/kmymoney2/trunk/debian/control
===================================================================
--- kde-extras/kmymoney2/trunk/debian/control 2008-01-19 18:01:34 UTC (rev 9047)
+++ kde-extras/kmymoney2/trunk/debian/control 2008-01-19 23:12:25 UTC (rev 9048)
@@ -3,8 +3,12 @@
Priority: optional
Maintainer: Debian KDE Extras Team <pkg-kde-extras at lists.alioth.debian.org>
Uploaders: Mark Purcell <msp at debian.org>, Fathi Boudra <fabo at debian.org>
-Build-Depends: cdbs, debhelper (>= 5), automake1.9, gs-common, html2ps, kdelibs4-dev, libofx-dev
-Standards-Version: 3.7.2
+Build-Depends: cdbs, debhelper (>= 6), quilt, automake, libtool, gs-common,
+ html2ps, kdelibs4-dev, libofx-dev
+Standards-Version: 3.7.3
+Homepage: http://kmymoney2.sourceforge.net
+Vcs-Browser: http://svn.debian.org/wsvn/pkg-kde/kde-extras/kmymoney2/trunk
+Vcs-Svn: svn://svn.debian.org/pkg-kde/kde-extras/kmymoney2/trunk
Package: kmymoney2
Architecture: any
@@ -13,6 +17,4 @@
KMyMoney is the Personal Finance Manager for KDE. It operates similar
to MS-Money and Quicken, supports different account types, categorisation
of expenses, QIF import/export, multiple currencies and initial online
- banking support.
- .
- Homepage: http://kmymoney2.sourceforge.net
+ banking support.
Modified: kde-extras/kmymoney2/trunk/debian/kmymoney2.lintian-overrides
===================================================================
--- kde-extras/kmymoney2/trunk/debian/kmymoney2.lintian-overrides 2008-01-19 18:01:34 UTC (rev 9047)
+++ kde-extras/kmymoney2/trunk/debian/kmymoney2.lintian-overrides 2008-01-19 23:12:25 UTC (rev 9048)
@@ -1,3 +1,3 @@
-kmymoney2: non-dev-pkg-with-shlib-symlink usr/lib/libkmm_mymoney.so.0.1.6 usr/lib/libkmm_mymoney.so
+kmymoney2: non-dev-pkg-with-shlib-symlink usr/lib/libkmm_mymoney.so.0.2.1 usr/lib/libkmm_mymoney.so
kmymoney2: non-dev-pkg-with-shlib-symlink usr/lib/libkmm_plugin.so.0.0.0 usr/lib/libkmm_plugin.so
kmymoney2: package-name-doesnt-match-sonames libkmm-mymoney0 libkmm-plugin0
Modified: kde-extras/kmymoney2/trunk/debian/menu
===================================================================
--- kde-extras/kmymoney2/trunk/debian/menu 2008-01-19 18:01:34 UTC (rev 9047)
+++ kde-extras/kmymoney2/trunk/debian/menu 2008-01-19 23:12:25 UTC (rev 9048)
@@ -1,6 +1,6 @@
?package(kmymoney2):\
needs="x11"\
- section="Apps/Tools"\
+ section="Applications/Office"\
hints="KDE"\
title="KMyMoney"\
icon="/usr/share/pixmaps/kmymoney2.xpm"\
Added: kde-extras/kmymoney2/trunk/debian/patches/00_admin_dir_update.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/00_admin_dir_update.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/00_admin_dir_update.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,7603 @@
+--- a/admin/acinclude.m4.in
++++ b/admin/acinclude.m4.in
+@@ -612,7 +612,7 @@
+ KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""])
+
+ if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then
+- kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share `kde-config --prefix`/share"
++ kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share"
+ test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs"
+ AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET)
+ if test "$KDE_XSL_STYLESHEET" = "NO"; then
+@@ -983,7 +983,7 @@
+ X_INCLUDES="-I$x_includes"
+ fi
+
+-if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
++if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then
+ X_LDFLAGS=""
+ x_libraries="/usr/lib"; dnl better than nothing :-
+ else
+@@ -1226,7 +1226,15 @@
+ kde_qt_dirs="$QTDIR /usr/lib/qt4 /usr/lib/qt /usr/share/qt4"
+ fi
+ if test $kde_qtver = 3; then
+- kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3"
++ kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3 /usr/lib${kdelibsuff}/qt-3.3"
++ if test -z "$PKG_CONFIG"; then
++ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
++ fi
++ if test "$PKG_CONFIG" != "no" ; then
++ if $PKG_CONFIG --exists qt-mt ; then
++ kde_qt_dirs="$kde_qt_dirs `$PKG_CONFIG --variable=prefix qt-mt`"
++ fi
++ fi
+ fi
+ if test $kde_qtver = 2; then
+ kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
+@@ -1443,6 +1451,14 @@
+ for dir in $kde_qt_dirs; do
+ qt_incdirs="$qt_incdirs $dir/include $dir"
+ done
++if test -z "$PKG_CONFIG"; then
++ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
++fi
++if test "$PKG_CONFIG" != "no" ; then
++ if $PKG_CONFIG --exists qt-mt ; then
++ qt_incdirs="$qt_incdirs `$PKG_CONFIG --variable=includedir qt-mt`"
++ fi
++fi
+ qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes"
+ if test ! "$ac_qt_includes" = "NO"; then
+ qt_incdirs="$ac_qt_includes $qt_incdirs"
+@@ -1459,8 +1475,16 @@
+
+ qt_libdirs=""
+ for dir in $kde_qt_dirs; do
+- qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir"
++ qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir/lib $dir"
+ done
++if test -z "$PKG_CONFIG"; then
++ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
++fi
++if test "$PKG_CONFIG" != "no" ; then
++ if $PKG_CONFIG --exists qt-mt ; then
++ qt_libdirs="$qt_incdirs `$PKG_CONFIG --variable=libdir qt-mt`"
++ fi
++fi
+ qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
+ if test ! "$ac_qt_libraries" = "NO"; then
+ qt_libdir=$ac_qt_libraries
+@@ -2631,6 +2655,7 @@
+ AC_TRY_LINK(dnl
+ [
+ #include<zlib.h>
++#include<string.h>
+ ],
+ [
+ char buf[42];
+@@ -2638,7 +2663,7 @@
+ /* this would segfault.. but we only link, don't run */
+ (void) gzgets(f, buf, sizeof(buf));
+
+- return (zlibVersion() == ZLIB_VERSION);
++ return (strcmp(zlibVersion(), ZLIB_VERSION) == 0);
+ ],
+ eval "ac_cv_lib_z='-lz'",
+ eval "ac_cv_lib_z=no")
+@@ -2738,16 +2763,16 @@
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+- if !(`$PKG_CONFIG --exists OpenEXR`) ; then
++ if ! $PKG_CONFIG --exists OpenEXR ; then
+ AC_MSG_RESULT(no)
+ EXRSTATUS=no
+ else
+- if !(`$PKG_CONFIG --atleast-version="1.1.1" OpenEXR`) ; then
++ if ! $PKG_CONFIG --atleast-version="1.1.1" OpenEXR ; then
+ AC_MSG_RESULT(no)
+ EXRSTATUS=old
+ else
+ kde_save_LIBS="$LIBS"
+- LIBS="$LIBS $all_libraries $USER_LDFLAGS $LIBZ `pkg-config --libs OpenEXR`"
++ LIBS="$LIBS $all_libraries $USER_LDFLAGS `pkg-config --libs OpenEXR` $LIBZ"
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ kde_save_CXXFLAGS="$CXXFLAGS"
+@@ -3198,7 +3223,7 @@
+ case $host in
+ *-*-linux-gnu)
+ CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS"
+- CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS"
++ CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS"
+ KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"])
+ KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"])
+ ;;
+@@ -3499,14 +3524,10 @@
+
+ AC_DEFUN([KDE_CHECK_LIB64],
+ [
+- kdelibsuff="$kde_libs_suffix"
+- if test -z "$kdelibsuff"; then
+- kdelibsuff="no"
+- fi
+ AC_ARG_ENABLE(libsuffix,
+ AC_HELP_STRING([--enable-libsuffix],
+ [/lib directory suffix (64,32,none,auto[=default])]),
+- kdelibsuff=$enableval)
++ kdelibsuff=$enableval, kdelibsuff="auto")
+
+ if test "$kdelibsuff" = "auto"; then
+
+@@ -3523,7 +3544,7 @@
+ rm -rf conftest.*
+ fi
+
+- if test "$kdelibsuff" = "no" -o "$kdelibsuff" = "none"; then
++ if test "$kdelibsuff" = "no" || test "$kdelibsuff" = "none"; then
+ kdelibsuff=
+ fi
+ if test -z "$kdelibsuff"; then
+@@ -3678,7 +3699,7 @@
+ AC_SUBST(GMSGFMT)
+ AC_SUBST(MSGFMT)
+
+- AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, kde-xgettext,
++ AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+
+ dnl Test whether we really found GNU xgettext.
+@@ -4628,12 +4649,14 @@
+
+ AC_DEFUN([KDE_CHECK_PYTHON],
+ [
+- KDE_CHECK_PYTHON_INTERN("2.4",
+- [KDE_CHECK_PYTHON_INTERN("2.3",
+- [KDE_CHECK_PYTHON_INTERN("2.2",
+- [KDE_CHECK_PYTHON_INTERN("2.1",
+- [KDE_CHECK_PYTHON_INTERN("2.0",
+- [KDE_CHECK_PYTHON_INTERN($1, $2) ])
++ KDE_CHECK_PYTHON_INTERN("2.5",
++ [KDE_CHECK_PYTHON_INTERN("2.4",
++ [KDE_CHECK_PYTHON_INTERN("2.3",
++ [KDE_CHECK_PYTHON_INTERN("2.2",
++ [KDE_CHECK_PYTHON_INTERN("2.1",
++ [KDE_CHECK_PYTHON_INTERN("2.0",
++ [KDE_CHECK_PYTHON_INTERN($1, $2) ])
++ ])
+ ])
+ ])
+ ])
+@@ -5001,7 +5024,6 @@
+ ])
+ fi
+ kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
+- kde_libs_suffix=`$KDECONFIG --libsuffix` || kde_libs_suffix=auto
+
+ AC_MSG_CHECKING([where to install])
+ if test "x$prefix" = "xNONE"; then
+@@ -5218,9 +5240,10 @@
+ for dir in $javadirs; do
+ dnl Check for the java executable
+ if test -x "$dir/java"; then
++ sane_path=$(cd $dir; /bin/pwd)
+ dnl And also check for a libjvm.so somewhere under there
+ dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big.
+- if test "$dir" != "/usr/bin"; then
++ if test "$sane_path" != "/usr/bin"; then
+ libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1`
+ if test ! -f $libjvmdir/libjvm.so; then continue; fi
+ jredirs="$jredirs $dir"
+--- a/admin/am_edit
++++ b/admin/am_edit
+@@ -172,25 +172,6 @@
+ # Only scan for files when the user hasn't entered data
+ if (!@makefiles)
+ {
+-# the following added by ipwizard according to the logic in cvs.sh
+-# that only checks the subdirs listed in inst-apps
+-# See also changes in sub add_makefile in this script
+- @allowedSubdirs = (); # Contains all the allowed subdirs
+- if (open(DIRS, "< inst-apps")) {
+- push (@allowedSubdirs, $topdir."/");
+- while(<DIRS>) {
+- chomp($_);
+- # the subdir listed and all children
+- push (@allowedSubdirs, $topdir."/".$_."/");
+- push (@allowedSubdirs, $topdir."/".$_."/.*/");
+- }
+- close DIRS;
+- } else {
+- push (@allowedSubdirs, $topdir."/");
+- push (@allowedSubdirs, $topdir."/.*/");
+- }
+-#end of ipwizard code
+-
+ print STDOUT "Scanning for Makefile.in\n" if ($verbose);
+ find (\&add_makefile, cwd());
+ #chdir('$topdir');
+@@ -214,16 +195,7 @@
+ # In conjunction with the "find" call, this builds the list of input files
+ sub add_makefile ()
+ {
+-# the following added by ipwizard (31.01.2006)
+-# only include the Makefile.in's listed in our wanted subdirs
+- if(/Makefile.in$/) {
+- foreach $dir (@allowedSubdirs) {
+- $match = $dir."Makefile.in";
+- if($File::Find::name =~ /^$match$/) {
+- push (@makefiles, $File::Find::name);
+- }
+- }
+- }
++ push (@makefiles, $File::Find::name) if (/Makefile.in$/);
+ }
+
+ #-----------------------------------------------------------------------------
+@@ -247,7 +219,6 @@
+
+ local %realObjs = (); # lists the objects compiled into $program
+ local %sources = (); # lists the sources used for $program
+- local %nisources = (); # lists of the non-install sources used for $program
+ local %finalObjs = (); # lists the objects compiled when final
+ local %realname = (); # the binary name of program variable
+ local %idlfiles = (); # lists the idl files used for $program
+@@ -291,7 +262,6 @@
+
+ foreach $program (@programs) {
+ $sources_changed{$program} = 0;
+- $nisources_changed{$program} = 0;
+ $dependmocs{$program} = "";
+ $important{$program} = "";
+ tag_IDLFILES(); # Sorts out idl rules
+@@ -315,13 +285,6 @@
+ substituteLine($lookup, "$program\_SOURCES=" . $sources{$program});
+ }
+ }
+- if ($nisources_changed{$program}) {
+- my $lookup = 'SOURCES\s*=[ \t]*(.*)';
+- if($MakefileData =~ m/\n$lookup/) {
+- substituteLine($lookup, "SOURCES= $1 \$(noinst\_$program\_SOURCES)");
+- }
+- appendLines("noinst\_$program\_SOURCES: $nisources{$program}\n");
+- }
+ if ($important{$program}) {
+ local %source_dict = ();
+ for $source (split(/[\034\s]+/, $sources{$program})) {
+@@ -459,10 +422,6 @@
+ substituteLine($lookup, "RECURSIVE_TARGETS = $1 nmcheck-recursive bcheck-recursive");
+ }
+
+- my $cvs_lines = "cvs-clean:\n";
+- $cvs_lines .= "\t\$(MAKE) admindir=\$(top_srcdir)/admin -f \$(top_srcdir)/admin/Makefile.common cvs-clean\n";
+- appendLines($cvs_lines);
+-
+ $cvs_lines = "kde-rpo-clean:\n";
+ $cvs_lines .= "\t-rm -f *.rpo\n";
+ appendLines($cvs_lines);
+@@ -780,10 +739,8 @@
+ my $mocs = ""; # Moc files (in this program)
+ my $moc_cpp_added = 0; # If we added some .moc.cpp files, due to
+ # no other .cpp file including the .moc one.
+-
+- my $slist = $sources{$program};
+- $slist .= " ".$nisources{$program} if(defined($nisources{$program}));
+- my @progsources = split(/[\034\s]+/, $slist);
++
++ my @progsources = split(/[\034\s]+/, $sources{$program});
+ my %shash = ();
+ @shash{@progsources} = 1; # we are only interested in the existence
+ my %sourcelist = ();
+@@ -915,8 +872,9 @@
+ $lines .= "\techo 'int main(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}.la.$cxxsuffix\n";
+
+ $lines .= "\n${kdeinit}_dummy.$cxxsuffix:\n";
+- $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' > ${kdeinit}_dummy.$cxxsuffix; \\\n";
+- $lines .= "\techo 'extern \"C\" int kdeinitmain(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}_dummy.$cxxsuffix\n";
++ $lines .= "\techo '#include <kdemacros.h>' > ${kdeinit}_dummy.$cxxsuffix; \\\n";
++ $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' >> ${kdeinit}_dummy.$cxxsuffix; \\\n";
++ $lines .= "\techo 'extern \"C\" KDE_EXPORT int kdeinitmain(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}_dummy.$cxxsuffix\n";
+
+ push(@cleanfiles, "${kdeinit}.la.$cxxsuffix");
+ push(@cleanfiles, "${kdeinit}_dummy.$cxxsuffix");
+@@ -1161,11 +1119,10 @@
+
+ if (@newObs) {
+ my $ext = ($program =~ /_la$/) ? ".moc.lo " : ".moc.o ";
+- my $depExt = ($program =~ /_la$/) ? ".Plo " : ".Po ";
+ $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext;
+ $dependmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix";
+ foreach $file (@newObs) {
+- $dep_files .= " \$(DEPDIR)/$file.moc$depExt" if($dep_files !~/$file.moc$depExt/);
++ $dep_files .= " \$(DEPDIR)/$file.moc.P" if($dep_files !~/$file.moc.P/);
+ }
+ }
+ if (@depend) {
+@@ -1343,8 +1300,8 @@
+ } else {
+ $realObjs{$program} .= " $sourcename.\$(OBJEXT)";
+ }
+- $nisources{$program} .= " $sourcename.$cxxsuffix";
+- $nisources_changed{$program} = 1;
++ $sources{$program} .= " $sourcename.$cxxsuffix";
++ $sources_changed{$program} = 1;
+ $important{$program} .= "$sourcename.h " if (!$skel);
+ $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl ";
+ push(@cleanfiles, "$sourcename.$cxxsuffix");
+@@ -1406,16 +1363,10 @@
+ if (!$kdeopts{"qtonly"}) {
+ $dep_lines .= "\techo '#include <kdialog.h>' > $source.$cxxsuffix\n";
+ $dep_lines .= "\techo '#include <klocale.h>' >> $source.$cxxsuffix\n";
+- $dep_lines .= "\techo '#ifndef KMM_I18N' >> $source.$cxxsuffix\n";
+- $dep_lines .= "\techo '#define KMM_I18N' >> $source.$cxxsuffix\n";
+- $dep_lines .= "\techo 'inline QString kmm_i18n(const char* msg, const char* ctx) { return i18n(ctx, msg); }' >> $source.$cxxsuffix\n";
+- $dep_lines .= "\techo 'inline QString kmm_i18n(const char* msg) { return i18n(msg); }' >> $source.$cxxsuffix\n";
+- $dep_lines .= "\techo '#endif' >> $source.$cxxsuffix\n";
+- $dep_lines .= "\t\$(top_srcdir)/admin/fixuifiles $sourcedir$source.ui; \\\n";
+ my ($mangled_source) = $source;
+ $mangled_source =~ s/[^A-Za-z0-9]/_/g; # get rid of garbage
+ $dep_lines .= "\t\$(UIC) -tr \${UIC_TR} -i $source.h $sourcedir$source.ui > $source.$cxxsuffix.temp ; ret=\$\$?; \\\n";
+- $dep_lines .= "\t\$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" $source.$cxxsuffix.temp | \$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | \$(PERL) -pe \"s,image([0-9][0-9]*)_data,img\\\$\$1_" . $mangled_source . ",g\" | \$(PERL) -pe \"s,: QWizard\\(,: KWizard(,g\" | \$(PERL) -pe \"s,\${UIC_TR},kmm_i18n,g\">> $source.$cxxsuffix ;\\\n";
++ $dep_lines .= "\t\$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" $source.$cxxsuffix.temp | \$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | \$(PERL) -pe \"s,image([0-9][0-9]*)_data,img\\\$\$1_" . $mangled_source . ",g\" | \$(PERL) -pe \"s,: QWizard\\(,: KWizard(,g\" >> $source.$cxxsuffix ;\\\n";
+ $dep_lines .= "\trm -f $source.$cxxsuffix.temp ;\\\n";
+ } else {
+ $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix; ret=\$\$?; \\\n";
+@@ -1424,7 +1375,6 @@
+ $dep_lines .= "$source.h: $sourcedir$source.ui\n";
+ $dep_lines .= "\trm -rf $source.h;\n";
+ if (!$kdeopts{"qtonly"}) {
+- $dep_lines .= "\t\$(top_srcdir)/admin/fixuifiles $sourcedir$source.ui; \\\n";
+ $dep_lines .= "\t\$(UIC) $sourcedir$source.ui | \$(PERL) -pi -e \"s,public QWizard,public KWizard,g; s,#include <qwizard.h>,#include <kwizard.h>,g\" >> $source.h ;\n";
+ } else {
+ $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n";
+@@ -1444,8 +1394,8 @@
+ } else {
+ $realObjs{$program} .= " $source.\$(OBJEXT)";
+ }
+- $nisources{$program} .= " $source.$cxxsuffix";
+- $nisources_changed{$program} = 1;
++ $sources{$program} .= " $source.$cxxsuffix";
++ $sources_changed{$program} = 1;
+ $important{$program} .= "$source.h ";
+ $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc ";
+ push(@cleanfiles, "$source.$cxxsuffix");
+@@ -1685,8 +1635,7 @@
+
+ $lookup = 'DISTFILES\s*=[ \t]*(.*)';
+ if ($MakefileData =~ /\n$lookup/) {
+-# $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1";
+- $tmp = "DISTFILES = \$(POFILES) $1";
++ $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1";
+ substituteLine ($lookup, $tmp);
+ }
+ }
+@@ -1746,6 +1695,9 @@
+ $tmp .= "\tfor file in \$(POFILES); do \\\n";
+ $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n";
+ $tmp .= "\tdone\n";
++ $tmp .= "\tfor file in \$(GMOFILES); do \\\n";
++ $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n";
++ $tmp .= "\tdone\n";
+
+ appendLines ($tmp);
+
+@@ -2076,7 +2028,7 @@
+
+ $lines .= "\n";
+ $lines .= "uninstall-docs:\n";
+- $lines .= "\t-rm -rf \$(kde_htmldir)/$kdelang/$appname\n";
++ $lines .= "\t-rm -rf \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n";
+ $lines .= "\n";
+ $lines .= "clean-docs:\n";
+ $lines .= "\t-rm -f index.cache.bz2\n";
+@@ -2295,8 +2247,6 @@
+ }
+ else
+ {
+- my $depExt = ($program =~ /_la$/) ? ".Plo " : ".Po ";
+- appendLines ("\@AMDEP_TRUE\@\@am__include\@ \@am__quote\@ ./\$(DEPDIR)/$mocFile.moc$depExt\@am__quote\@\n");
+ appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n");
+ $cleanMoc .= " $mocFile$mocExt";
+ appendLines ("mocs: $mocFile$mocExt\n");
+@@ -2403,7 +2353,7 @@
+ $MakefileData =~ s/\034/\\\n/g; # Restore continuation lines
+ # Append our $progId line, _below_ the "generated by automake" line
+ # because automake-1.6 relies on the first line to be his own.
+- my $progIdLine = "\# $progId - " . '$Revision: 1.11.2.3 $ '."\n";
++ my $progIdLine = "\# $progId - " . '$Revision: 483858 $ '."\n";
+ if ( !( $MakefileData =~ s/^(.*generated .*by automake.*\n)/$1$progIdLine/ ) ) {
+ warn "automake line not found in $makefile\n";
+ # Fallback: first line
+--- /dev/null
++++ b/admin/bcheck.pl
+@@ -0,0 +1,157 @@
++#!/usr/bin/perl -w
++
++use DB_File;
++use Fcntl ':flock';
++
++if (!defined($ARGV[0])) {
++ print "usage: requires .class dump as parameter!\n";
++ exit;
++}
++
++sub bailout
++{
++ untie %bcheckdb if(defined(%bcheckdb));
++
++ if(defined(MYLOCK)) {
++ flock MYLOCK, LOCK_UN;
++ close(MYLOCK);
++ }
++
++ print @_;
++ exit 5;
++}
++
++sub ask_user
++{
++ my ($dbkey, $dbchunk) = @_;
++
++ if (defined($ENV{"BCHECK_UPDATE"})) {
++ $bcheckdb{$dbkey} = $dbchunk;
++ return;
++ }
++
++ &bailout("BC problem detected") if (! -t STDIN);
++
++ print "(I)gnore / (Q)uit / (U)pdate: ";
++
++ my $key;
++ while(defined(read STDIN, $key, 1)) {
++ $key = lc($key);
++
++ print "got: >$key<\n";
++
++ return if ($key eq 'i');
++
++ &bailout("BC problem. aborted") if ($key eq 'q');
++
++ if ($key eq 'u') {
++ $bcheckdb{$dbkey} = $dbchunk;
++ return;
++ }
++ print "\n(I)gnore / (Q)uit / (U)pdate: ";
++ }
++}
++
++sub diff_chunk($$)
++{
++ my ($oldl, $newl) = @_;
++ my @old = split /^/m, $oldl;
++ my @new = split /^/m, $newl;
++ my $haschanges = 0;
++ my $max = $#old > $#new ? $#old : $#new;
++
++ die "whoops. key different" if ($old[0] ne $new[0]);
++
++ if ($#old != $#new) {
++ warn ("Structural difference.\n");
++ print @old;
++ print "-----------------------------------------------\n";
++ print @new;
++ $haschanges = 1;
++ return $haschanges;
++ }
++
++ print $old[0];
++
++ my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/);
++
++ my $c = 1;
++ while ($c < $max) {
++ my ($o, $n) = ($old[$c], $new[$c]);
++ chomp $o;
++ chomp $n;
++ $c++;
++ next if ($o eq $n);
++
++ if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) {
++ next if ($n eq "$1$class$2");
++ }
++
++ $haschanges = 1;
++
++ print "-$o\n+$n\n\n";
++ }
++
++ return $haschanges;
++}
++
++local $dblock = $ENV{"HOME"} . "/bcheck.lock";
++my $dbfile = $ENV{"HOME"} . "/bcheck.db";
++my $cdump = $ARGV[0];
++
++die "file $cdump is not readable: $!" if (! -f $cdump);
++
++# make sure the advisory lock exists
++open(MYLOCK, ">$dblock");
++print MYLOCK "";
++
++flock MYLOCK, LOCK_EX;
++
++tie %bcheckdb, 'DB_File', $dbfile;
++
++my $chunk = "";
++
++open (IN, "<$cdump") or die "cannot open $cdump: $!";
++while (<IN>) {
++
++ chop;
++
++ s/0x[0-9a-fA-F]+/0x......../g;
++ s/base size=/size=/g;
++ s/\(\)\s*$//g;
++ s/base align=/align=/g;
++
++ $chunk .= $_ . "\n";
++
++ if(/^\s*$/) {
++ my @lines = split /^/m, $chunk;
++ my $key = $lines[0];
++ chomp $key;
++
++ if($key !~ /<anonymous struct>/ &&
++ $key !~ /<anonymous union>/) {
++ if(defined($bcheckdb{$key})) {
++ my $dbversion = $bcheckdb{$key};
++
++ if($dbversion ne $chunk) {
++ &ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk));
++ }
++ }
++ else {
++ $bcheckdb{$key} = $chunk;
++ print "NEW: $key\n";
++ }
++ }
++
++ $chunk = "";
++ next;
++ }
++
++}
++close(IN);
++
++untie %bcheckdb;
++flock MYLOCK, LOCK_UN;
++close(MYLOCK);
++
++exit 0;
+--- a/admin/compile
++++ b/admin/compile
+@@ -1,8 +1,9 @@
+ #! /bin/sh
+-
+ # Wrapper for compilers which do not understand `-c -o'.
+
+-# Copyright 1999, 2000 Free Software Foundation, Inc.
++scriptversion=2005-05-14.22
++
++# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+ # Written by Tom Tromey <tromey at cygnus.com>.
+ #
+ # This program is free software; you can redistribute it and/or modify
+@@ -17,83 +18,125 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
+-# Usage:
+-# compile PROGRAM [ARGS]...
+-# `-o FOO.o' is removed from the args passed to the actual compile.
+-
+-prog=$1
+-shift
++# This file is maintained in Automake, please report
++# bugs to <bug-automake at gnu.org> or send patches to
++# <automake-patches at gnu.org>.
++
++case $1 in
++ '')
++ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
++ exit 1;
++ ;;
++ -h | --h*)
++ cat <<\EOF
++Usage: compile [--help] [--version] PROGRAM [ARGS]
++
++Wrapper for compilers which do not understand `-c -o'.
++Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
++arguments, and rename the output as expected.
++
++If you are trying to build a whole package this is not the
++right script to run: please start by reading the file `INSTALL'.
++
++Report bugs to <bug-automake at gnu.org>.
++EOF
++ exit $?
++ ;;
++ -v | --v*)
++ echo "compile $scriptversion"
++ exit $?
++ ;;
++esac
+
+ ofile=
+ cfile=
+-args=
+-while test $# -gt 0; do
+- case "$1" in
+- -o)
+- # configure might choose to run compile as `compile cc -o foo foo.c'.
+- # So we do something ugly here.
+- ofile=$2
+- shift
+- case "$ofile" in
+- *.o | *.obj)
+- ;;
+- *)
+- args="$args -o $ofile"
+- ofile=
+- ;;
+- esac
+- ;;
+- *.c)
+- cfile=$1
+- args="$args $1"
+- ;;
+- *)
+- args="$args $1"
+- ;;
+- esac
+- shift
++eat=
++
++for arg
++do
++ if test -n "$eat"; then
++ eat=
++ else
++ case $1 in
++ -o)
++ # configure might choose to run compile as `compile cc -o foo foo.c'.
++ # So we strip `-o arg' only if arg is an object.
++ eat=1
++ case $2 in
++ *.o | *.obj)
++ ofile=$2
++ ;;
++ *)
++ set x "$@" -o "$2"
++ shift
++ ;;
++ esac
++ ;;
++ *.c)
++ cfile=$1
++ set x "$@" "$1"
++ shift
++ ;;
++ *)
++ set x "$@" "$1"
++ shift
++ ;;
++ esac
++ fi
++ shift
+ done
+
+ if test -z "$ofile" || test -z "$cfile"; then
+- # If no `-o' option was seen then we might have been invoked from a
+- # pattern rule where we don't need one. That is ok -- this is a
+- # normal compilation that the losing compiler can handle. If no
+- # `.c' file was seen then we are probably linking. That is also
+- # ok.
+- exec "$prog" $args
++ # If no `-o' option was seen then we might have been invoked from a
++ # pattern rule where we don't need one. That is ok -- this is a
++ # normal compilation that the losing compiler can handle. If no
++ # `.c' file was seen then we are probably linking. That is also
++ # ok.
++ exec "$@"
+ fi
+
+ # Name of file we expect compiler to create.
+-cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
++cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+ # Create the lock directory.
+ # Note: use `[/.-]' here to ensure that we don't use the same name
+ # that we are using for the .o file. Also, base the name on the expected
+ # object file name, since that is what matters with a parallel build.
+-lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
++lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+ while true; do
+- if mkdir $lockdir > /dev/null 2>&1; then
+- break
+- fi
+- sleep 1
++ if mkdir "$lockdir" >/dev/null 2>&1; then
++ break
++ fi
++ sleep 1
+ done
+ # FIXME: race condition here if user kills between mkdir and trap.
+-trap "rmdir $lockdir; exit 1" 1 2 15
++trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+ # Run the compile.
+-"$prog" $args
+-status=$?
++"$@"
++ret=$?
+
+ if test -f "$cofile"; then
+- mv "$cofile" "$ofile"
++ mv "$cofile" "$ofile"
++elif test -f "${cofile}bj"; then
++ mv "${cofile}bj" "$ofile"
+ fi
+
+-rmdir $lockdir
+-exit $status
++rmdir "$lockdir"
++exit $ret
++
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+--- a/admin/conf.change.pl
++++ b/admin/conf.change.pl
+@@ -19,8 +19,8 @@
+
+ # You should have received a copy of the GNU Library General Public License
+ # along with this library; see the file COPYING.LIB. If not, write to
+-# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+-# Boston, MA 02111-1307, USA.
++# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++# Boston, MA 02110-1301, USA.
+
+ # we have to change two places
+ # 1. the splitting of the substitutions into chunks of 90 (or even 48 in
+@@ -81,7 +81,7 @@
+ # on autoconf 250, it ends with '# CONFIG_HEADER section'
+ #
+ # gg: if a post-processing commands section is found first,
+-# stop there and insert a new loop to honour the case/esac.
++# stop there and insert a new loop to honor the case/esac.
+ # (pattern: /^\s+#\sRun the commands associated with the file./)
+
+ if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
+--- a/admin/config.guess
++++ b/admin/config.guess
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
++# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+-timestamp='2004-06-24'
++timestamp='2005-06-30'
+
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -17,13 +17,15 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
++
+ # Originally written by Per Bothner <per at bothner.com>.
+ # Please send patches to <config-patches at gnu.org>. Submit a context
+ # diff and a properly formatted ChangeLog entry.
+@@ -53,7 +55,7 @@
+ GNU config.guess ($timestamp)
+
+ Originally written by Per Bothner.
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+
+ This is free software; see the source for copying conditions. There is NO
+@@ -66,11 +68,11 @@
+ while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+- echo "$timestamp" ; exit 0 ;;
++ echo "$timestamp" ; exit ;;
+ --version | -v )
+- echo "$version" ; exit 0 ;;
++ echo "$version" ; exit ;;
+ --help | --h* | -h )
+- echo "$usage"; exit 0 ;;
++ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+@@ -196,64 +198,20 @@
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+- exit 0 ;;
+- amd64:OpenBSD:*:*)
+- echo x86_64-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- amiga:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- arc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- cats:OpenBSD:*:*)
+- echo arm-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- hp300:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- luna88k:OpenBSD:*:*)
+- echo m88k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mac68k:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- macppc:OpenBSD:*:*)
+- echo powerpc-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvme68k:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvme88k:OpenBSD:*:*)
+- echo m88k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvmeppc:OpenBSD:*:*)
+- echo powerpc-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- pmax:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- sgi:OpenBSD:*:*)
+- echo mipseb-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- sun3:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- wgrisc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:OpenBSD:*:*)
+- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
++ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+@@ -306,37 +264,43 @@
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+- exit 0 ;;
++ exit ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+- exit 0 ;;
++ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+- exit 0 ;;
++ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+- exit 0;;
++ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+- exit 0 ;;
++ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+- exit 0 ;;
++ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+- exit 0 ;;
++ exit ;;
++ *:z/VM:*:*)
++ echo s390-ibm-zvmoe
++ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+- exit 0 ;;
++ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+- exit 0;;
++ exit ;;
++ arm:riscos:*:*|arm:RISCOS:*:*)
++ echo arm-unknown-riscos
++ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+- exit 0;;
++ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+@@ -344,32 +308,32 @@
+ else
+ echo pyramid-pyramid-bsd
+ fi
+- exit 0 ;;
++ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+- exit 0 ;;
++ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+- exit 0 ;;
+- DRS?6000:UNIX_SV:4.2*:7*)
++ exit ;;
++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+- sparc) echo sparc-icl-nx7 && exit 0 ;;
++ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+@@ -378,10 +342,10 @@
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+- exit 0 ;;
++ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+@@ -393,10 +357,10 @@
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+- exit 0 ;;
++ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+@@ -407,40 +371,40 @@
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+- exit 0 ;;
++ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+@@ -464,32 +428,33 @@
+ exit (-1);
+ }
+ EOF
+- $CC_FOR_BUILD -o $dummy $dummy.c \
+- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+- && exit 0
++ $CC_FOR_BUILD -o $dummy $dummy.c &&
++ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++ SYSTEM_NAME=`$dummy $dummyarg` &&
++ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+- exit 0 ;;
++ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+- exit 0 ;;
++ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+- exit 0 ;;
++ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+- exit 0 ;;
++ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+- exit 0 ;;
++ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+- exit 0 ;;
++ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+- exit 0 ;;
++ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+@@ -505,29 +470,29 @@
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+- exit 0 ;;
++ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+- exit 0 ;;
++ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+- exit 0 ;;
++ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+- exit 0 ;;
++ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+- exit 0 ;;
++ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+- exit 0 ;;
++ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+- exit 0 ;;
++ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+@@ -535,7 +500,7 @@
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+- exit 0 ;;
++ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+@@ -550,14 +515,18 @@
+ exit(0);
+ }
+ EOF
+- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+- echo rs6000-ibm-aix3.2.5
++ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
++ then
++ echo "$SYSTEM_NAME"
++ else
++ echo rs6000-ibm-aix3.2.5
++ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+- exit 0 ;;
++ exit ;;
+ *:AIX:*:[45])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+@@ -571,28 +540,28 @@
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+- exit 0 ;;
++ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+- exit 0 ;;
++ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+- exit 0 ;;
++ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+- exit 0 ;; # report: romp-ibm BSD 4.3
++ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+- exit 0 ;;
++ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+- exit 0 ;;
++ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+- exit 0 ;;
++ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+- exit 0 ;;
++ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+@@ -656,7 +625,18 @@
+ then
+ # avoid double evaluation of $set_cc_for_build
+ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
+- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
++
++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
++ # generating 64-bit code. GNU and HP use different nomenclature:
++ #
++ # $ CC_FOR_BUILD=cc ./config.guess
++ # => hppa2.0w-hp-hpux11.23
++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
++ # => hppa64-hp-hpux11.23
++
++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
++ grep __LP64__ >/dev/null
+ then
+ HP_ARCH="hppa2.0w"
+ else
+@@ -664,11 +644,11 @@
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+- exit 0 ;;
++ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+- exit 0 ;;
++ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+@@ -696,152 +676,166 @@
+ exit (0);
+ }
+ EOF
+- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
++ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+- exit 0 ;;
++ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+- exit 0 ;;
++ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+- exit 0 ;;
++ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+- exit 0 ;;
++ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+- exit 0 ;;
++ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+- exit 0 ;;
++ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+- exit 0 ;;
++ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+- exit 0 ;;
++ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+- exit 0 ;;
++ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+- exit 0 ;;
++ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
++ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
++ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
++ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
++ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
++ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
++ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+- exit 0 ;;
++ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+- exit 0 ;;
++ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:FreeBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+- exit 0 ;;
++ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+- exit 0 ;;
++ exit ;;
+ i*:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+- exit 0 ;;
++ exit ;;
++ i*:windows32*:*)
++ # uname -m includes "-pc" on this system.
++ echo ${UNAME_MACHINE}-mingw32
++ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+- exit 0 ;;
++ exit ;;
+ x86:Interix*:[34]*)
+ echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+- exit 0 ;;
++ exit ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+- exit 0 ;;
++ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+- exit 0 ;;
++ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+- exit 0 ;;
++ exit ;;
++ amd64:CYGWIN*:*:*)
++ echo x86_64-unknown-cygwin
++ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+- exit 0 ;;
++ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+- exit 0 ;;
++ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+- exit 0 ;;
++ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+- exit 0 ;;
++ exit ;;
+ arm*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+- exit 0 ;;
++ exit ;;
++ crisv32:Linux:*:*)
++ echo crisv32-axis-linux-gnu
++ exit ;;
++ frv:Linux:*:*)
++ echo frv-unknown-linux-gnu
++ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ mips:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+@@ -859,7 +853,7 @@
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+@@ -878,14 +872,14 @@
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+@@ -899,7 +893,7 @@
+ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+- exit 0 ;;
++ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+@@ -907,25 +901,25 @@
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+- exit 0 ;;
++ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+- exit 0 ;;
++ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+- exit 0 ;;
++ exit ;;
+ i*86:Linux:*:*)
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+@@ -943,15 +937,15 @@
+ ;;
+ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+- exit 0 ;;
++ exit ;;
+ coff-i386)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+- exit 0 ;;
++ exit ;;
+ "")
+ # Either a pre-BFD a.out linker (linux-gnuoldld) or
+ # one that does not give us useful --help.
+ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+- exit 0 ;;
++ exit ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ eval $set_cc_for_build
+@@ -979,15 +973,18 @@
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
+- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
++ test x"${LIBC}" != x && {
++ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
++ exit
++ }
++ test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+ ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+- exit 0 ;;
++ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+@@ -995,27 +992,27 @@
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+- exit 0 ;;
++ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+- exit 0 ;;
++ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+- exit 0 ;;
++ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+- exit 0 ;;
+- i*86:syllable:*:*)
++ exit ;;
++ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+- exit 0 ;;
++ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+- exit 0 ;;
++ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+@@ -1023,15 +1020,16 @@
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+- exit 0 ;;
+- i*86:*:5:[78]*)
++ exit ;;
++ i*86:*:5:[678]*)
++ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+- exit 0 ;;
++ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+@@ -1049,73 +1047,73 @@
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+- exit 0 ;;
++ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+- exit 0 ;;
++ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+- exit 0 ;;
++ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+- exit 0 ;;
++ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+- exit 0 ;;
++ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+- exit 0 ;;
++ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+- exit 0 ;;
++ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+- exit 0 ;;
++ exit ;;
+ M68*:*:R3V[5678]*:*)
+- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+- && echo i486-ncr-sysv4 && exit 0 ;;
++ && { echo i486-ncr-sysv4; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+- exit 0 ;;
++ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+- exit 0 ;;
++ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+- exit 0 ;;
++ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+@@ -1123,68 +1121,73 @@
+ else
+ echo ns32k-sni-sysv
+ fi
+- exit 0 ;;
++ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel at ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+- exit 0 ;;
++ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes at openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+- exit 0 ;;
++ exit ;;
+ *:*:*:FTX*)
+ # From seanf at swdc.stratus.com.
+ echo i860-stratus-sysv4
+- exit 0 ;;
++ exit ;;
++ i*86:VOS:*:*)
++ # From Paul.Green at stratus.com.
++ echo ${UNAME_MACHINE}-stratus-vos
++ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green at stratus.com.
+ echo hppa1.1-stratus-vos
+- exit 0 ;;
++ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+- exit 0 ;;
++ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+- exit 0 ;;
++ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+- exit 0 ;;
++ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+- exit 0 ;;
++ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+- exit 0 ;;
++ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:Darwin:*:*)
+- case `uname -p` in
++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++ case $UNAME_PROCESSOR in
+ *86) UNAME_PROCESSOR=i686 ;;
+- powerpc) UNAME_PROCESSOR=powerpc ;;
++ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+@@ -1192,22 +1195,25 @@
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+- exit 0 ;;
++ exit ;;
++ NSE-?:NONSTOP_KERNEL:*:*)
++ echo nse-tandem-nsk${UNAME_RELEASE}
++ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+- exit 0 ;;
++ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+- exit 0 ;;
++ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+@@ -1218,38 +1224,44 @@
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+- exit 0 ;;
++ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+- exit 0 ;;
++ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+- exit 0 ;;
++ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+- exit 0 ;;
++ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+- exit 0 ;;
++ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+- exit 0 ;;
++ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+- exit 0 ;;
++ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+- exit 0 ;;
++ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+- A*) echo alpha-dec-vms && exit 0 ;;
+- I*) echo ia64-dec-vms && exit 0 ;;
+- V*) echo vax-dec-vms && exit 0 ;;
+- esac
++ A*) echo alpha-dec-vms ; exit ;;
++ I*) echo ia64-dec-vms ; exit ;;
++ V*) echo vax-dec-vms ; exit ;;
++ esac ;;
++ *:XENIX:*:SysV)
++ echo i386-pc-xenix
++ exit ;;
++ i*86:skyos:*:*)
++ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
++ exit ;;
+ esac
+
+ #echo '(No uname command or uname output not recognized.)' 1>&2
+@@ -1281,7 +1293,7 @@
+ #endif
+
+ #if defined (__arm) && defined (__acorn) && defined (__unix)
+- printf ("arm-acorn-riscix"); exit (0);
++ printf ("arm-acorn-riscix\n"); exit (0);
+ #endif
+
+ #if defined (hp300) && !defined (hpux)
+@@ -1370,11 +1382,12 @@
+ }
+ EOF
+
+-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
+
+ # Apollos put the system type in the environment.
+
+-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+ # Convex versions that predate uname can use getsysinfo(1)
+
+@@ -1383,22 +1396,22 @@
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+- exit 0 ;;
++ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+- exit 0 ;;
++ exit ;;
+ c34*)
+ echo c34-convex-bsd
+- exit 0 ;;
++ exit ;;
+ c38*)
+ echo c38-convex-bsd
+- exit 0 ;;
++ exit ;;
+ c4*)
+ echo c4-convex-bsd
+- exit 0 ;;
++ exit ;;
+ esac
+ fi
+
+@@ -1409,7 +1422,9 @@
+ the operating system you are using. It is advised that you
+ download the most up to date version of the config scripts from
+
+- ftp://ftp.gnu.org/pub/gnu/config/
++ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
++and
++ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+
+ If the version you run ($0) is already up to date, please
+ send the following data and any information you think might be
+--- a/admin/config.pl
++++ b/admin/config.pl
+@@ -25,8 +25,8 @@
+
+ # You should have received a copy of the GNU Library General Public License
+ # along with this library; see the file COPYING.LIB. If not, write to
+-# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+-# Boston, MA 02111-1307, USA.
++# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++# Boston, MA 02110-1301, USA.
+
+ use strict;
+
+@@ -53,6 +53,7 @@
+
+ open(CF, "< $ac_subs") || die "can't open $ac_subs: $!";
+ my @subs = <CF>;
++my $pat;
+ close(CF);
+ chomp @subs;
+ @comp_match=();
+@@ -60,7 +61,7 @@
+
+ if ($bad_perl) {
+ print "Using perl older than version 5.005\n";
+- foreach my $pat (@subs) {
++ foreach $pat (@subs) {
+ if ( ($pat =~ m/s%([^%]*)%([^%]*)%g/ )
+ || ($pat =~ m/s%([^%]*)%([^%]*)%;t/ )
+ || ($pat =~ m/s,([^,]*),(.*),;t/)
+@@ -85,7 +86,7 @@
+ }
+ }
+ } else {
+- foreach my $pat (@subs) {
++ foreach $pat (@subs) {
+ if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) ||
+ ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) ||
+ ($pat =~ /s,([^,]*),(.*),;t/) ) {
+@@ -192,8 +193,9 @@
+ my $filedata;
+ my @infiles=split(' ', $infiles);
+ my $i=0;
++ my $name;
+
+- foreach my $name (@infiles) {
++ foreach $name (@infiles) {
+ if (open(CF, "< $name")) {
+ while (<CF>) {
+ $filedata .= $_;
+--- a/admin/config.sub
++++ b/admin/config.sub
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Configuration validation subroutine script.
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
++# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+-timestamp='2004-06-24'
++timestamp='2005-07-01'
+
+ # This file is (in principle) common to ALL GNU software.
+ # The presence of a machine in this file suggests that SOME GNU software
+@@ -21,14 +21,15 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330,
+-# Boston, MA 02111-1307, USA.
+-
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
++
+ # Please send patches to <config-patches at gnu.org>. Submit a context
+ # diff and a properly formatted ChangeLog entry.
+ #
+@@ -70,7 +71,7 @@
+ version="\
+ GNU config.sub ($timestamp)
+
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+
+ This is free software; see the source for copying conditions. There is NO
+@@ -83,11 +84,11 @@
+ while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+- echo "$timestamp" ; exit 0 ;;
++ echo "$timestamp" ; exit ;;
+ --version | -v )
+- echo "$version" ; exit 0 ;;
++ echo "$version" ; exit ;;
+ --help | --h* | -h )
+- echo "$usage"; exit 0 ;;
++ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+@@ -99,7 +100,7 @@
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+- exit 0;;
++ exit ;;
+
+ * )
+ break ;;
+@@ -231,13 +232,14 @@
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
++ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+- | m32r | m32rle | m68000 | m68k | m88k | mcore \
++ | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+@@ -246,6 +248,7 @@
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
++ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+@@ -254,23 +257,28 @@
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
++ | ms1 \
+ | msp430 \
+ | ns16k | ns32k \
+- | openrisc | or32 \
++ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
++ | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
++ | sparcv8 | sparcv9 | sparcv9b \
+ | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
+ | v850 | v850e \
+ | we32k \
+- | x86 | xscale | xstormy16 | xtensa \
++ | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | z8k)
+ basic_machine=$basic_machine-unknown
+ ;;
++ m32c)
++ basic_machine=$basic_machine-unknown
++ ;;
+ m6811 | m68hc11 | m6812 | m68hc12)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+@@ -298,7 +306,7 @@
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* \
+- | bs2000-* \
++ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+@@ -310,7 +318,7 @@
+ | ip2k-* | iq2000-* \
+ | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+- | m88110-* | m88k-* | mcore-* \
++ | m88110-* | m88k-* | maxq-* | mcore-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+@@ -319,6 +327,7 @@
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
++ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+@@ -327,6 +336,7 @@
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
++ | ms1-* \
+ | msp430-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | orion-* \
+@@ -336,18 +346,21 @@
+ | romp-* | rs6000-* \
+ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
++ | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
++ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tron-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
+- | xtensa-* \
++ | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
++ | xstormy16-* | xtensa-* \
+ | ymp-* \
+ | z8k-*)
+ ;;
++ m32c-*)
++ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+@@ -457,6 +470,9 @@
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
++ crisv32 | crisv32-* | etraxfs*)
++ basic_machine=crisv32-axis
++ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+@@ -486,6 +502,10 @@
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
++ djgpp)
++ basic_machine=i586-pc
++ os=-msdosdjgpp
++ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+@@ -751,9 +771,8 @@
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+- or32 | or32-*)
++ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+- os=-coff
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+@@ -1026,6 +1045,10 @@
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
++ xbox)
++ basic_machine=i686-pc
++ os=-mingw32
++ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+@@ -1078,9 +1101,6 @@
+ sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+- sh64)
+- basic_machine=sh64-unknown
+- ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b)
+ basic_machine=sparc-sun
+ ;;
+@@ -1167,7 +1187,7 @@
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* | -skyos*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+@@ -1294,6 +1314,9 @@
+ -kaos*)
+ os=-kaos
+ ;;
++ -zvmoe)
++ os=-zvmoe
++ ;;
+ -none)
+ ;;
+ *)
+@@ -1542,7 +1565,7 @@
+ esac
+
+ echo $basic_machine$os
+-exit 0
++exit
+
+ # Local variables:
+ # eval: (add-hook 'write-file-hooks 'time-stamp)
+--- a/admin/configure.in.bot.end
++++ b/admin/configure.in.bot.end
+@@ -16,6 +16,21 @@
+ fi
+ fi
+
++if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
++ echo ""
++ echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
++ echo "was not included. Therefore, GCC symbol visibility support remains disabled."
++ echo ""
++ echo "For better performance, consider including the Qt visibility supporting patch"
++ echo "located at:"
++ echo ""
++ echo "http://bugs.kde.org/show_bug.cgi?id=109386"
++ echo ""
++ echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
++ echo "everything will continue to work just fine without it."
++ echo ""
++fi
++
+ if test "$all_tests" = "bad"; then
+ if test ! "$cache_file" = "/dev/null"; then
+ echo ""
+--- a/admin/configure.in.min
++++ b/admin/configure.in.min
+@@ -13,8 +13,8 @@
+
+ dnl You should have received a copy of the GNU Library General Public License
+ dnl along with this library; see the file COPYING.LIB. If not, write to
+-dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+-dnl Boston, MA 02111-1307, USA.
++dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++dnl Boston, MA 02110-1301, USA.
+
+ # Original Author was Kalle at kde.org
+ # I lifted it in some mater. (Stephan Kulow)
+--- a/admin/cvs.sh
++++ b/admin/cvs.sh
+@@ -131,6 +131,7 @@
+ if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
+ echo "*** Creating config.h template"
+ $AUTOHEADER || exit 1
++ touch config.h.in
+ fi
+
+ echo "*** Creating Makefile templates"
+@@ -186,8 +187,9 @@
+ if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
+ echo "*** Creating config.h template"
+ $AUTOHEADER || exit 1
++ touch config.h.in
+ fi
+-$AUTOMAKE --foreign
++$AUTOMAKE --foreign || exit 1
+ if test "$UNSERMAKE" = no; then
+ echo "*** Postprocessing Makefile templates"
+ perl -w admin/am_edit || exit 1
+@@ -219,6 +221,7 @@
+ {
+ $ACLOCAL $ACLOCALFLAGS
+ $AUTOHEADER
++touch config.h.in
+ $AUTOMAKE
+ AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1`
+ case $AUTOMAKE_STRING in
+@@ -307,16 +310,13 @@
+ if test -n "$line"; then
+ modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"`
+ VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"`
+- if test -z "$KMYMONEY_RELEASE"; then
+- VERSION="$VERSION-CVS";
+- fi
+ fi
+ sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \
+ configure.in.new > configure.in && mv configure.in configure.in.new
+ fi
+ fi
+ if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then
+- VERSION="\"3.4.89\""
++ VERSION="\"3.5.8\""
+ fi
+ if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then
+ modulename=`pwd`;
+@@ -531,7 +531,7 @@
+ {
+ podir=${podir:-$PWD/po}
+ files=`find . -name Makefile.am | xargs egrep -l '^messages:' `
+-dirs=`for i in $files; do echo \`dirname $i\`; done | sort -r`
++dirs=`for i in $files; do echo \`dirname $i\`; done`
+ tmpname="$PWD/messages.log"
+ if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi
+ if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi
+@@ -555,9 +555,8 @@
+ perl -e '$mes=0; while (<STDIN>) { next if (/^(if\s|else\s|endif)/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile
+
+ kdepotpath=${includedir:-`kde-config --expandvars --install include`}/kde.pot
+-
+- if test "$kdepotpath" == "NONE/kde.pot"; then
+- kdepotpath=`kde-config --expandvars --prefix`/include/kde.pot
++ if ! test -f $kdepotpath; then
++ kdepotpath=`kde-config --expandvars --prefix`/include/kde.pot
+ fi
+
+ $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" srcdir=. \
+@@ -568,7 +567,7 @@
+ fi
+ ) 2>&1 | grep -v '^make\[1\]' > $tmpname
+ test -s $tmpname && { echo $subdir ; cat "$tmpname"; }
+- # test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp
++ test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp
+ rm -f $subdir/_translatorinfo.cpp
+ rm -f $subdir/_transMakefile
+ done
+@@ -632,7 +631,7 @@
+ rm -f $makefile_wo
+ fi
+
+-# Call script to find autoconf and freinds. Uses eval since the script outputs
++# Call script to find autoconf and friends. Uses eval since the script outputs
+ # sh-compatible code.
+ eval `$admindir/detect-autoconf.pl`
+
+--- a/admin/depcomp
++++ b/admin/depcomp
+@@ -1,7 +1,9 @@
+ #! /bin/sh
+-
+ # depcomp - compile a program generating dependencies as side-effects
+-# Copyright 1999, 2000 Free Software Foundation, Inc.
++
++scriptversion=2005-07-09.11
++
++# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+@@ -15,8 +17,8 @@
+
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
+
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+@@ -25,13 +27,45 @@
+
+ # Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
+
++case $1 in
++ '')
++ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
++ exit 1;
++ ;;
++ -h | --h*)
++ cat <<\EOF
++Usage: depcomp [--help] [--version] PROGRAM [ARGS]
++
++Run PROGRAMS ARGS to compile a file, generating dependencies
++as side-effects.
++
++Environment variables:
++ depmode Dependency tracking mode.
++ source Source file read by `PROGRAMS ARGS'.
++ object Object file output by `PROGRAMS ARGS'.
++ DEPDIR directory where to store dependencies.
++ depfile Dependency file to output.
++ tmpdepfile Temporary file to use when outputing dependencies.
++ libtool Whether libtool is used (yes/no).
++
++Report bugs to <bug-automake at gnu.org>.
++EOF
++ exit $?
++ ;;
++ -v | --v*)
++ echo "depcomp $scriptversion"
++ exit $?
++ ;;
++esac
++
+ if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+ fi
+-# `libtool' can also be set to `yes' or `no'.
+
+-depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
++# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
++depfile=${depfile-`echo "$object" |
++ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+ rm -f "$tmpdepfile"
+@@ -163,19 +197,25 @@
+
+ aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+- # in a .u file. This file always lives in the current directory.
+- # Also, the AIX compiler puts `$object:' at the start of each line;
+- # $object doesn't have directory information.
+- stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
++ # in a .u file. In older versions, this file always lives in the
++ # current directory. Also, the AIX compiler puts `$object:' at the
++ # start of each line; $object doesn't have directory information.
++ # Version 6 uses the directory in both cases.
++ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+- outname="$stripped.o"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+-
+ stat=$?
++
++ if test -f "$tmpdepfile"; then :
++ else
++ stripped=`echo "$stripped" | sed 's,^.*/,,'`
++ tmpdepfile="$stripped.u"
++ fi
++
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+@@ -183,6 +223,7 @@
+ fi
+
+ if test -f "$tmpdepfile"; then
++ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+@@ -198,11 +239,9 @@
+ ;;
+
+ icc)
+- # Must come before tru64.
+-
+- # Intel's C compiler understands `-MD -MF file'. However
++ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+- # will fill foo.d with something like
++ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+@@ -210,6 +249,12 @@
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
++ # ICC 7.1 will output
++ # foo.o: sub/foo.c sub/foo.h
++ # and will wrap long lines using \ :
++ # foo.o: sub/foo.c ... \
++ # sub/foo.h ... \
++ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+@@ -219,45 +264,70 @@
+ exit $stat
+ fi
+ rm -f "$depfile"
+- # Each line is of the form `foo.o: dependent.h'.
++ # Each line is of the form `foo.o: dependent.h',
++ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+- sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+- sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
++ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
++ # Some versions of the HPUX 10.20 sed can't process this invocation
++ # correctly. Breaking it into two sed invocations is a workaround.
++ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
++ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+ tru64)
+- # The Tru64 AIX compiler uses -MD to generate dependencies as a side
++ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++ test "x$dir" = "x$object" && dir=
++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+- tmpdepfile1="$object.d"
+- tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'`
+ if test "$libtool" = yes; then
++ # With Tru64 cc, shared objects can also be used to make a
++ # static library. This mecanism is used in libtool 1.4 series to
++ # handle both shared and static libraries in a single compilation.
++ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
++ #
++ # With libtool 1.5 this exception was removed, and libtool now
++ # generates 2 separate objects for the 2 libraries. These two
++ # compilations output dependencies in in $dir.libs/$base.o.d and
++ # in $dir$base.o.d. We have to check for both files, because
++ # one of the two compilations can be disabled. We should prefer
++ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
++ # automatically cleaned when .libs/ is deleted, while ignoring
++ # the former would cause a distcleancheck panic.
++ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
++ tmpdepfile2=$dir$base.o.d # libtool 1.5
++ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
++ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
++ tmpdepfile1=$dir$base.o.d
++ tmpdepfile2=$dir$base.d
++ tmpdepfile3=$dir$base.d
++ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+- rm -f "$tmpdepfile1" "$tmpdepfile2"
++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+- if test -f "$tmpdepfile1"; then
+- tmpdepfile="$tmpdepfile1"
+- else
+- tmpdepfile="$tmpdepfile2"
+- fi
++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
++ do
++ test -f "$tmpdepfile" && break
++ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+- # That's a space and a tab in the [].
+- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
++ # That's a tab and a space in the [].
++ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+@@ -270,34 +340,42 @@
+
+ dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+- # always write the proprocessed file to stdout, regardless of -o,
+- # because we must use -o when running libtool.
+- test -z "$dashmflag" && dashmflag=-M
+- ( IFS=" "
+- case " $* " in
+- *" --mode=compile "*) # this is libtool, let us make it quiet
+- for arg
+- do # cycle over the arguments
+- case "$arg" in
+- "--mode=compile")
+- # insert --quiet before "--mode=compile"
+- set fnord "$@" --quiet
+- shift # fnord
+- ;;
+- esac
+- set fnord "$@" "$arg"
+- shift # fnord
+- shift # "$arg"
+- done
++ # always write the preprocessed file to stdout, regardless of -o.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test $1 != '--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ # Remove `-o $object'.
++ IFS=" "
++ for arg
++ do
++ case $arg in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # $arg
+ ;;
+ esac
+- "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+- ) &
+- proc=$!
+- "$@"
+- stat=$?
+- wait "$proc"
+- if test "$stat" != 0; then exit $stat; fi
++ done
++
++ test -z "$dashmflag" && dashmflag=-M
++ # Require at least two characters before searching for `:'
++ # in the target name. This is to cope with DOS-style filenames:
++ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
++ "$@" $dashmflag |
++ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+@@ -315,36 +393,40 @@
+ ;;
+
+ makedepend)
+- # X makedepend
+- (
+- shift
+- cleared=no
+- for arg in "$@"; do
+- case $cleared in no)
+- set ""; shift
+- cleared=yes
+- esac
+- case "$arg" in
+- -D*|-I*)
+- set fnord "$@" "$arg"; shift;;
+- -*)
+- ;;
+- *)
+- set fnord "$@" "$arg"; shift;;
+- esac
++ "$@" || exit $?
++ # Remove any Libtool call
++ if test "$libtool" = yes; then
++ while test $1 != '--mode=compile'; do
++ shift
+ done
+- obj_suffix="`echo $object | sed 's/^.*\././'`"
+- touch "$tmpdepfile"
+- ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
+- ) &
+- proc=$!
+- "$@"
+- stat=$?
+- wait "$proc"
+- if test "$stat" != 0; then exit $stat; fi
++ shift
++ fi
++ # X makedepend
++ shift
++ cleared=no
++ for arg in "$@"; do
++ case $cleared in
++ no)
++ set ""; shift
++ cleared=yes ;;
++ esac
++ case "$arg" in
++ -D*|-I*)
++ set fnord "$@" "$arg"; shift ;;
++ # Strip any option that makedepend may not understand. Remove
++ # the object too, otherwise makedepend will parse it as a source file.
++ -*|$object)
++ ;;
++ *)
++ set fnord "$@" "$arg"; shift ;;
++ esac
++ done
++ obj_suffix="`echo $object | sed 's/^.*\././'`"
++ touch "$tmpdepfile"
++ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+- tail +3 "$tmpdepfile" | tr ' ' '
++ sed '1,2d' "$tmpdepfile" | tr ' ' '
+ ' | \
+ ## Some versions of the HPUX 10.20 sed can't process this invocation
+ ## correctly. Breaking it into two sed invocations is a workaround.
+@@ -354,35 +436,40 @@
+
+ cpp)
+ # Important note: in order to support this mode, a compiler *must*
+- # always write the proprocessed file to stdout, regardless of -o,
+- # because we must use -o when running libtool.
+- ( IFS=" "
+- case " $* " in
+- *" --mode=compile "*)
+- for arg
+- do # cycle over the arguments
+- case $arg in
+- "--mode=compile")
+- # insert --quiet before "--mode=compile"
+- set fnord "$@" --quiet
+- shift # fnord
+- ;;
+- esac
+- set fnord "$@" "$arg"
+- shift # fnord
+- shift # "$arg"
+- done
++ # always write the preprocessed file to stdout.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test $1 != '--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ # Remove `-o $object'.
++ IFS=" "
++ for arg
++ do
++ case $arg in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # $arg
+ ;;
+ esac
+- "$@" -E |
+- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
++ done
++
++ "$@" -E |
++ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
++ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+- ) &
+- proc=$!
+- "$@"
+- stat=$?
+- wait "$proc"
+- if test "$stat" != 0; then exit $stat; fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+@@ -392,34 +479,27 @@
+
+ msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+- # always write the proprocessed file to stdout, regardless of -o,
++ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+- ( IFS=" "
+- case " $* " in
+- *" --mode=compile "*)
+- for arg
+- do # cycle over the arguments
+- case $arg in
+- "--mode=compile")
+- # insert --quiet before "--mode=compile"
+- set fnord "$@" --quiet
+- shift # fnord
+- ;;
+- esac
++ "$@" || exit $?
++ IFS=" "
++ for arg
++ do
++ case "$arg" in
++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
++ set fnord "$@"
++ shift
++ shift
++ ;;
++ *)
+ set fnord "$@" "$arg"
+- shift # fnord
+- shift # "$arg"
+- done
+- ;;
++ shift
++ shift
++ ;;
+ esac
+- "$@" -E |
+- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+- ) &
+- proc=$!
+- "$@"
+- stat=$?
+- wait "$proc"
+- if test "$stat" != 0; then exit $stat; fi
++ done
++ "$@" -E |
++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+@@ -439,3 +519,12 @@
+ esac
+
+ exit 0
++
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+--- /dev/null
++++ b/admin/deps.am
+@@ -0,0 +1,19 @@
++$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in $(top_srcdir)/admin/cvs.sh $(top_srcdir)/admin/pkg.m4.in
++ @cd $(top_srcdir) && $(SHELL) admin/cvs.sh acinclude_m4
++
++$(top_srcdir)/configure.in: $(top_srcdir)/subdirs $(top_srcdir)/configure.files $(top_srcdir)/admin/cvs.sh
++ @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure_in
++
++$(top_srcdir)/configure.files: $(top_srcdir)/subdirs $(CONF_FILES)
++ @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure.files $(top_srcdir)/admin/cvs.sh
++
++$(top_srcdir)/Makefile.am: $(top_srcdir)/Makefile.am.in $(top_srcdir)/subdirs $(top_srcdir)/admin/cvs.sh
++ @cd $(top_srcdir) && $(SHELL) admin/cvs.sh Makefile_am
++
++$(top_srcdir)/subdirs: $(top_srcdir)/Makefile.am.in $(top_srcdir)/admin/cvs.sh
++ @cd $(top_srcdir) && $(SHELL) admin/cvs.sh subdirs
++
++# defining default rules for files that may not be present
++$(top_srcdir)/Makefile.am.in:
++$(CONF_FILES):
++
+--- a/admin/detect-autoconf.pl
++++ b/admin/detect-autoconf.pl
+@@ -21,6 +21,73 @@
+ return "";
+ }
+
++# Subroutine to lexicographically compare two version strings, a and b.
++# If a > b, 1 is returned.
++# If a == b, 0 is returned.
++# If a < b, -1 is returned.
++#
++# If the strings are of uneven number length then the shorter string is
++# prepended by enough zeroes to make the two string lengths equal in order to
++# allow an accurate comparison. Note that the zero-padding only occurs in
++# between version separators (i.e. 1.6 and 1.10, results in 1.06 vs. 1.10).
++# Parts of the version ending in -foo (or any other text) are not considered
++# when doing the compare. (i.e. 2.53a vs 2.53 doesn't end up in 2.53a vs.
++# 2.053)
++sub compareVersions
++{
++ my ($a, $b) = @_;
++
++ # Split the strings up by '.' (version separator) and start comparing digit
++ # length.
++
++ my @aParts = split(/\./, $a);
++ my @bParts = split(/\./, $b);
++
++ # Make the arrays equal in length by adding missing zeroes to the end of the
++ # version.
++ push @aParts, '0' while scalar @aParts < scalar @bParts;
++ push @bParts, '0' while scalar @bParts < scalar @aParts;
++
++ # Now compare each individual portion.
++ for (my $i = 0; $i < scalar @aParts; ++$i)
++ {
++ # Make sure that any portion that has numbers is contiguous. I'm sure
++ # there's a technique for saving stuff like 2.52a2 but I don't feel
++ # like implementing it.
++ if ($aParts[$i] !~ /^[^\d]*\d+[^\d]*$/ or
++ $bParts[$i] !~ /^[^\d]*\d+[^\d]*$/)
++ {
++ die "Not able to compare $a to $b!\n";
++ }
++
++ my ($aDigits) = ($aParts[$i] =~ /(\d+)/);
++ my ($bDigits) = ($bParts[$i] =~ /(\d+)/);
++
++ # Perl is $MODERATELY_INSULTING_TERM, don't remove the parentheses in
++ # the delta calculation below.
++ my $delta = (length $aDigits) - (length $bDigits);
++ if ($delta < 0) # b is longer
++ {
++ my $replacement = ('0' x (-$delta)) . $aDigits;
++ $aParts[$i] =~ s/$aDigits/$replacement/;
++ }
++ elsif ($delta > 0) # a is longer
++ {
++ my $replacement = ('0' x $delta) . $bDigits;
++ $bParts[$i] =~ s/$bDigits/$replacement/;
++ }
++ }
++
++ # Arrays now have standardized version components, let's re-merge them
++ # to strings to do the compare.
++ my $newA = join('.', @aParts);
++ my $newB = join('.', @bParts);
++
++ return 1 if ($newA gt $newB);
++ return -1 if ($newA lt $newB);
++ return 0;
++}
++
+ # Subroutine to determine the highest installed version of the given program,
+ # searching from the given paths.
+ sub findBest
+@@ -29,9 +96,10 @@
+ my $best_version_found = '0'; # Deliberately a string.
+ my %versions;
+ my %minimumVersions = (
+- 'autoconf' => '2.5',
++ 'autoconf' => '2.5',
+ 'automake' => '1.6',
+ );
++ my $sgn; # Used for compareVersions results.
+
+ # Allow user to use environment variable to override search.
+ return $ENV{uc $program} if $ENV{uc $program};
+@@ -44,8 +112,12 @@
+ # Don't check non-executable scripts.
+ next unless -x $file;
+
+- ($version) = $file =~ /$program-?(.*)$/;
+- $version =~ s/-|\.//g;
++ ($version) = $file =~ /$prefix\/$program-?(.*)$/;
++
++ # Don't check the -wrapper ones (or any other non program one).
++ # The real deal should start with a version number, or have no
++ # suffix at all.
++ next if $version =~ /^[^\d]/;
+
+ # Special case some programs to make sure it has a minimum version.
+ if (not $version and exists $minimumVersions{$program})
+@@ -54,15 +126,20 @@
+ my $versionOutput = `$program --version 2>/dev/null | head -n 1`;
+
+ # If we can't run the script to get the version it likely won't work later.
+- next unless $versionOutput;
++ next unless $versionOutput;
+
+ # Use number.number for version (we don't need the excess in general).
+- ($versionOutput) = ($versionOutput =~ /(\d\.\d)/);
++ ($versionOutput) = ($versionOutput =~ /(\d+\.\d+)/);
++
++ # compareVersions returns -1 if the left argument is less than
++ # the right argument. It can also die for invalid input so
++ # wrap with eval.
++ eval {
++ $sgn = compareVersions($versionOutput, $min_version);
++ };
+
+- # Use lt to do lexicographical comparison of strings (which should be
+- # equivalent and doesn't involve issues with floating point conversions).
+- if (not $versionOutput or $versionOutput lt $min_version)
+- {
++ # $@ would be set if an error was encountered.
++ if ($@ or not $versionOutput or $sgn == -1) {
+ next;
+ }
+ }
+@@ -78,7 +155,12 @@
+ $versions{$version} = $file;
+
+ # Use string comparison so that e.g. 253a will be > 253 but < 254.
+- if ($version gt $best_version_found)
++ # See above about the need for eval.
++ eval {
++ $sgn = compareVersions($version, $best_version_found);
++ };
++
++ if (not $@ and $sgn == 1)
+ {
+ $best_version_found = $version;
+ }
+@@ -171,3 +253,5 @@
+ EOF
+
+ exit 0;
++
++# vim: set noet ts=8 sw=4:
+--- /dev/null
++++ b/admin/Doxyfile.am
+@@ -0,0 +1,102 @@
++## generate API documentation with doxygen
++apidox-am-yes:
++ @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$DOXDATA" ; then \
++ export DOXDATA=$(kde_libs_htmldir)/en/common ; \
++ fi ; \
++ abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\
++ test -d $(top_builddir)/apidocs || \
++ ( cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
++ --no-modulename --installdir=$(kde_libs_htmldir)/en \
++ --no-recurse $(abs_top_srcdir) . ) ; \
++ cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
++ --recurse --no-modulename --installdir=$(kde_libs_htmldir)/en \
++ $$abs_top_srcdir $(subdir)
++
++apidox-am-toplevel-yes:
++ @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$ADMIN" ; then \
++ export DOXDATA=$(kde_libs_htmldir)/en/common ; \
++ fi ; \
++ abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\
++ cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \
++ --no-modulename --installdir=$(kde_libs_htmldir)/en \
++ $$abs_top_srcdir
++
++## Don't generate API documentation without doxygen
++apidox-am-no:
++
++apidox-am-toplevel-no:
++
++
++apidox:
++ @if test "$(subdir)" != "."; then \
++ $(MAKE) apidox-am- at KDE_HAS_DOXYGEN@ ;\
++ else \
++ $(MAKE) apidox-am-toplevel- at KDE_HAS_DOXYGEN@ ;\
++ fi
++
++
++
++install-data-local: install-apidox
++
++## install API documentation
++install-apidox:
++ @if test "$(subdir)" != "."; then \
++ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \
++ if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \
++ echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
++ $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
++ fi; \
++ if test -d $(top_builddir)/apidocs/$(subdir)/html; then \
++ list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \
++ echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\
++ for file in $$list; do \
++ $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \
++ done; \
++ fi; \
++ else\
++ if test -d $(top_builddir)/apidocs; then \
++ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\
++ list=`cd $(top_builddir)/apidocs && ls -1`; \
++ echo "installing $(top_builddir)/apidocs/$$file" ;\
++ echo "target directory $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs" ; \
++ for file in $$list; do \
++ if test -f $(top_builddir)/apidocs/$$file; then \
++ $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
++ fi; \
++ done ; fi; \
++ fi
++
++uninstall-local: uninstall-apidox
++
++## uninstall API documentation
++uninstall-apidox:
++ @if test "$(subdir)" != "."; then \
++ if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \
++ rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
++ fi \
++ else \
++ if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \
++ rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
++ fi \
++ fi
++
++install-apidox-recurse: install-apidox
++ @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \
++ list='$(SUBDIRS)'; \
++ for subdir in $$list; do \
++ if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am > /dev/null ; then \
++ echo "Installing apidox from $$subdir"; \
++ if test "$$subdir" != "."; then \
++ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no install-apidox-recurse) || exit 1; \
++ fi ; fi ;\
++ done; \
++ fi
++
++
++
++.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes
++
++
++# Local Variables:
++# mode: makefile
++# End:
+--- /dev/null
++++ b/admin/Doxyfile.global
+@@ -0,0 +1,192 @@
++OUTPUT_LANGUAGE = English
++USE_WINDOWS_ENCODING = NO
++BRIEF_MEMBER_DESC = NO
++REPEAT_BRIEF = YES
++ABBREVIATE_BRIEF =
++ALWAYS_DETAILED_SEC = YES
++INLINE_INHERITED_MEMB = NO
++FULL_PATH_NAMES = NO
++STRIP_FROM_PATH =
++SHORT_NAMES = NO
++JAVADOC_AUTOBRIEF = YES
++MULTILINE_CPP_IS_BRIEF = NO
++INHERIT_DOCS = YES
++DISTRIBUTE_GROUP_DOC = NO
++TAB_SIZE = 4
++OPTIMIZE_OUTPUT_FOR_C = NO
++OPTIMIZE_OUTPUT_JAVA = NO
++SUBGROUPING = YES
++EXTRACT_ALL = NO
++EXTRACT_PRIVATE = NO
++EXTRACT_STATIC = YES
++EXTRACT_LOCAL_CLASSES = NO
++HIDE_UNDOC_MEMBERS = NO
++HIDE_UNDOC_CLASSES = YES
++HIDE_FRIEND_COMPOUNDS = NO
++HIDE_IN_BODY_DOCS = NO
++INTERNAL_DOCS = NO
++CASE_SENSE_NAMES = YES
++HIDE_SCOPE_NAMES = NO
++SHOW_INCLUDE_FILES = YES
++INLINE_INFO = YES
++SORT_BRIEF_DOCS = NO
++SORT_BY_SCOPE_NAME = NO
++GENERATE_TESTLIST = NO
++GENERATE_BUGLIST = YES
++GENERATE_DEPRECATEDLIST= YES
++ENABLED_SECTIONS =
++MAX_INITIALIZER_LINES = 30
++SHOW_USED_FILES = YES
++QUIET = YES
++WARNINGS = NO
++WARN_IF_UNDOCUMENTED = NO
++WARN_IF_DOC_ERROR = YES
++WARN_FORMAT =
++WARN_LOGFILE =
++INPUT =
++FILE_PATTERNS = *.h \
++ *.cpp \
++ *.cc \
++ *.hpp \
++ *.dox \
++ *.c++ \
++ *.cxx \
++ *.h++ \
++ *.hh
++RECURSIVE = YES
++EXCLUDE =
++EXCLUDE_SYMLINKS = NO
++EXCLUDE_PATTERNS = *.moc.* \
++ moc* \
++ *.all_cpp.* \
++ *unload.* \
++ */test/* \
++ */tests/* \
++ *_p.h
++EXAMPLE_PATH =
++EXAMPLE_PATTERNS =
++EXAMPLE_RECURSIVE = NO
++IMAGE_PATH =
++INPUT_FILTER =
++FILTER_SOURCE_FILES = NO
++SOURCE_BROWSER = YES
++INLINE_SOURCES = NO
++STRIP_CODE_COMMENTS = YES
++REFERENCED_BY_RELATION = YES
++REFERENCES_RELATION = YES
++VERBATIM_HEADERS = YES
++ALPHABETICAL_INDEX = YES
++COLS_IN_ALPHA_INDEX = 3
++HTML_OUTPUT =
++HTML_FILE_EXTENSION = .html
++HTML_HEADER = ../apidocs/common/header.html
++HTML_FOOTER = ../apidocs/common/footer.html
++HTML_STYLESHEET = ../apidocs/common/doxygen.css
++HTML_ALIGN_MEMBERS = YES
++GENERATE_HTMLHELP = NO
++CHM_FILE =
++HHC_LOCATION =
++GENERATE_CHI = NO
++BINARY_TOC = NO
++TOC_EXPAND = NO
++DISABLE_INDEX = YES
++ENUM_VALUES_PER_LINE = 4
++GENERATE_TREEVIEW = NO
++TREEVIEW_WIDTH = 250
++GENERATE_LATEX = NO
++LATEX_OUTPUT =
++LATEX_CMD_NAME = latex
++MAKEINDEX_CMD_NAME = makeindex
++COMPACT_LATEX = NO
++PAPER_TYPE = a4wide
++EXTRA_PACKAGES =
++LATEX_HEADER =
++PDF_HYPERLINKS = NO
++USE_PDFLATEX = NO
++LATEX_BATCHMODE = NO
++LATEX_HIDE_INDICES = NO
++GENERATE_RTF = NO
++RTF_OUTPUT =
++COMPACT_RTF = NO
++RTF_HYPERLINKS = NO
++RTF_STYLESHEET_FILE =
++RTF_EXTENSIONS_FILE =
++GENERATE_MAN = NO
++MAN_OUTPUT =
++MAN_EXTENSION = .kde3
++MAN_LINKS = YES
++GENERATE_XML = NO
++XML_OUTPUT = xml
++XML_SCHEMA =
++XML_DTD =
++XML_PROGRAMLISTING = NO
++GENERATE_AUTOGEN_DEF = NO
++GENERATE_PERLMOD = NO
++PERLMOD_LATEX = NO
++PERLMOD_PRETTY = YES
++PERLMOD_MAKEVAR_PREFIX =
++ENABLE_PREPROCESSING = YES
++SEARCH_INCLUDES = YES
++INCLUDE_PATH =
++INCLUDE_FILE_PATTERNS =
++PREDEFINED = QT_VERSION=320 \
++ __cplusplus \
++ Q_WS_X11
++EXPAND_AS_DEFINED =
++SKIP_FUNCTION_MACROS = YES
++TAGFILES =
++GENERATE_TAGFILE =
++ALLEXTERNALS = NO
++EXTERNAL_GROUPS = NO
++PERL_PATH =
++CLASS_DIAGRAMS = YES
++HIDE_UNDOC_RELATIONS = NO
++HAVE_DOT = NO
++UML_LOOK = NO
++TEMPLATE_RELATIONS = YES
++INCLUDE_GRAPH = YES
++INCLUDED_BY_GRAPH = YES
++CALL_GRAPH = NO
++GRAPHICAL_HIERARCHY = YES
++DOT_IMAGE_FORMAT = png
++DOT_PATH =
++DOTFILE_DIRS =
++MAX_DOT_GRAPH_WIDTH = 800
++MAX_DOT_GRAPH_HEIGHT = 1024
++MAX_DOT_GRAPH_DEPTH = 0
++GENERATE_LEGEND = YES
++DOT_CLEANUP = YES
++SEARCHENGINE = NO
++
++### KDE Settings
++ALIASES = \
++ "intern=\par<b>Internal use only.</b>" \
++ "reimp=\par<b>Reimplemented from superclass.</b>" \
++ "obsolete=@deprecated" \
++ "feature=\xrefitem features \"Feature(s)\" \"Features\"" \
++ "maintainer=\xrefitem maintainers \"Maintainer(s)\" \"Maintainers\"" \
++ "unmaintained=\xrefitem unmaintained \"Unmaintained\" \"Unmaintained\"" \
++ "requirement=\xrefitem requirements \"Requirement(s)\" \"Requirements\"" \
++ "faq=\xrefitem FAQ \"F.A.Q.\" \"F.A.Q.\"" \
++ "authors=\xrefitem authors \"Author(s)\" \"Authors\"" \
++ "FIXME=\xrefitem fixme \"Fixme\" \"Fixme\""
++
++HTML_ALIGN_MEMBERS = YES
++REFERENCED_BY_RELATION = NO
++REFERENCES_RELATION = NO
++VERBATIM_HEADERS = NO
++GENERATE_HTML = YES
++SOURCE_BROWSER = YES
++GENERATE_AUTOGEN_DEF = NO
++DETAILS_AT_TOP = YES
++SORT_MEMBER_DOCS = YES
++GENERATE_TODOLIST = YES
++IGNORE_PREFIX = K
++GENERATE_HTML = YES
++CLASS_GRAPH = YES
++COLLABORATION_GRAPH = NO
++
++
++MACRO_EXPANSION = YES
++EXPAND_ONLY_PREDEF = YES
++
+--- /dev/null
++++ b/admin/doxygen.sh
+@@ -0,0 +1,883 @@
++#! /bin/sh
++#
++# doxygen.sh Copyright (C) 2005 by Adriaan de Groot
++# Based on some code from Doxyfile.am, among other things.
++# License: GPL version 2.
++# See file COPYING in kdelibs for details.
++
++echo "*** doxygen.sh"
++
++# Recurse handling is a little complicated, since normally
++# subdir (given on the command-line) processing doesn't recurse
++# but you can force it to do so.
++recurse=1
++recurse_given=NO
++use_modulename=1
++cleanup=YES
++
++while test -n "$1" ; do
++case "x$1" in
++"x--no-cleanup" )
++ cleanup=NO
++ ;;
++"x--no-recurse" )
++ recurse=0
++ recurse_given=YES
++ ;;
++"x--recurse" )
++ recurse=1
++ recurse_given=YES
++ ;;
++"x--no-modulename" )
++ use_modulename=0
++ ;;
++"x--modulename" )
++ use_modulename=1
++ ;;
++"x--help" )
++ echo "doxygen.sh usage:"
++ echo "doxygen.sh [--no-recurse] [--no-modulename] <srcdir> [<subdir>]"
++ exit 2
++ ;;
++x--doxdatadir=* )
++ DOXDATA=`echo $1 | sed -e 's+--doxdatadir=++'`
++ ;;
++x--installdir=*)
++ PREFIX=`echo $1 | sed -e 's+--installdir=++'`
++ ;;
++x--* )
++ echo "Unknown option: $1"
++ exit 1
++ ;;
++* )
++ top_srcdir="$1"
++ break
++ ;;
++esac
++shift
++done
++
++
++### Sanity check the mandatory "top srcdir" argument.
++if test -z "$top_srcdir" ; then
++ echo "Usage: doxygen.sh <top_srcdir>"
++ exit 1
++fi
++if test ! -d "$top_srcdir" ; then
++ echo "top_srcdir ($top_srcdir) is not a directory."
++ exit 1
++fi
++
++### Normalize top_srcdir so it is an absolute path.
++if expr "x$top_srcdir" : "x/" > /dev/null ; then
++ # top_srcdir is absolute already
++ :
++else
++ top_srcdir=`cd "$top_srcdir" 2> /dev/null && pwd`
++ if test ! -d "$top_srcdir" ; then
++ echo "top_srcdir ($top_srcdir) is not a directory."
++ exit 1
++ fi
++fi
++
++
++
++### Sanity check and guess QTDOCDIR.
++if test -z "$QTDOCDIR" ; then
++ if test -z "$QTDIR" ; then
++ for i in /usr/X11R6/share/doc/qt/html
++ do
++ QTDOCDIR="$i"
++ test -d "$QTDOCDIR" && break
++ done
++ else
++ for i in share/doc/qt/html doc/html
++ do
++ QTDOCDIR="$QTDIR/$i"
++ test -d "$QTDOCDIR" && break
++ done
++ fi
++fi
++if test -z "$QTDOCDIR" || test ! -d "$QTDOCDIR" ; then
++ if test -z "$QTDOCDIR" ; then
++ echo "* QTDOCDIR could not be guessed."
++ else
++ echo "* QTDOCDIR does not name a directory."
++ fi
++ if test -z "$QTDOCTAG" ; then
++ echo "* QTDOCDIR set to \"\""
++ QTDOCDIR=""
++ else
++ echo "* But I'll use $QTDOCDIR anyway because of QTDOCTAG."
++ fi
++fi
++
++### Get the "top srcdir", also its name, and handle the case that subdir "."
++### is given (which would be top_srcdir then, so it's equal to none-given
++### but no recursion either).
++###
++# top_srcdir="$1" # Already set by options processing
++module_name=`basename "$top_srcdir"`
++subdir="$2"
++if test "x." = "x$subdir" ; then
++ subdir=""
++ if test "x$recurse_given" = "xNO" ; then
++ recurse=0
++ fi
++fi
++if test "x" != "x$subdir" ; then
++ # If no recurse option given explicitly, default to
++ # no recurse when processing subdirs given on the command-line.
++ if test "x$recurse_given" = "xNO" ; then
++ recurse=0
++ fi
++fi
++
++if test -z "$DOXDATA" || test ! -d "$DOXDATA" ; then
++ if test -n "$DOXDATA" ; then
++ echo "* \$DOXDATA is '$DOXDATA' which does not name a directory"
++ fi
++ DOXDATA="$top_srcdir/doc/common"
++fi
++
++if test ! -d "$DOXDATA" ; then
++ echo "* \$DOXDATA does not name a directory ( or is unset ), tried \"$DOXDATA\""
++ exit 1
++fi
++
++if test -n "$PREFIX" && test ! -d "$PREFIX" ; then
++ echo "* \$PREFIX does not name a directory, tried \"$PREFIX\""
++ echo "* \$PREFIX is disabled."
++ PREFIX=""
++fi
++
++### We need some values from top-level files, which
++### are not preserved between invocations of this
++### script, so factor it out for easy use.
++create_doxyfile_in()
++{
++ eval `grep 'VERSION="' "$top_srcdir/admin/cvs.sh"`
++ echo "PROJECT_NUMBER = $VERSION" > Doxyfile.in
++ grep '^KDE_INIT_DOXYGEN' "$top_srcdir/configure.in.in" | \
++ sed -e 's+[^[]*\[\([^]]*\)+PROJECT_NAME = "\1"+' \
++ -e 's+].*++' >> Doxyfile.in
++}
++
++apidoxdir="$module_name"-apidocs
++test "x$use_modulename" = "x0" && apidoxdir="apidocs"
++
++### If we're making the top subdir, create the structure
++### for the apidox and initialize it. Otherwise, just use the
++### structure assumed to be there.
++if test -z "$subdir" ; then
++ if test ! -d "$apidoxdir" ; then
++ mkdir "$apidoxdir" > /dev/null 2>&1
++ fi
++ cd "$apidoxdir" > /dev/null 2>&1 || {
++ echo "Cannot create and cd into $apidoxdir"
++ exit 1
++ }
++
++ test -f "Doxyfile.in" || create_doxyfile_in
++
++ # Copy in logos and the like
++ for i in "favicon.ico" "kde_gear_64.png"
++ do
++ cp "$DOXDATA/$i" . > /dev/null 2> /dev/null
++ done
++ for i in "$top_srcdir/doc/api/Dox-"*.png
++ do
++ T=`basename "$i" | sed -e 's+Dox-++'`
++ test -f "$i" && cp "$i" "./$T" > /dev/null 2> /dev/null
++ done
++
++ top_builddir="."
++ srcdir="$1"
++ subdir="."
++else
++ cd "$apidoxdir" > /dev/null 2>&1 || {
++ echo "Cannot cd into $apidoxdir -- maybe you need to"
++ echo "build the top-level dox first."
++ exit 1
++ }
++
++ if test "x1" = "x$recurse" ; then
++ # OK, so --recurse was requested
++ if test ! -f "subdirs.top" ; then
++ echo "* No subdirs.top available in the $apidoxdir."
++ echo "* The --recurse option will be ignored."
++ recurse=0
++ fi
++ fi
++fi
++
++### Read a single line (TODO: support \ continuations) from the Makefile.am.
++### Used to extract variable assignments from it.
++extract_line()
++{
++ file="$2" ; test -z "$file" && file="$srcdir/Makefile.am"
++ pattern=`echo "$1" | tr + .`
++ grep "^$1" "$file" | \
++ sed -e "s+$pattern.*=\s*++"
++}
++
++### Handle the COMPILE_{FIRST,LAST,BEFORE,AFTER} part of Makefile.am
++### in the toplevel. Copied from admin/cvs.sh. Licence presumed LGPL).
++create_subdirs()
++{
++echo "* Sorting top-level subdirs"
++dirs=
++idirs=
++if test -f "$top_srcdir/inst-apps"; then
++ idirs=`cat "$top_srcdir/"inst-apps`
++else
++ idirs=`cd "$top_srcdir" && ls -1 | sort`
++fi
++
++compilefirst=""
++compilelast=""
++if test -f "$top_srcdir/"Makefile.am.in ; then
++ compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' "$top_srcdir/"Makefile.am.in | head -n 1`
++ compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' "$top_srcdir/"Makefile.am.in | head -n 1`
++fi
++for i in $idirs; do
++ if test -f "$top_srcdir/$i"/Makefile.am; then
++ case " $compilefirst $compilelast " in
++ *" $i "*) ;;
++ *) dirs="$dirs $i"
++ esac
++ fi
++done
++
++: > ./_SUBDIRS
++
++for d in $compilefirst; do
++ echo $d >> ./_SUBDIRS
++done
++
++(for d in $dirs; do
++ list=""
++ if test -f "$top_srcdir/"Makefile.am.in ; then
++ list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" "$top_srcdir/"Makefile.am.in | head -n 1`
++ fi
++ for s in $list; do
++ echo $s $d
++ done
++ list=""
++ if test -f "$top_srcdir/"Makefile.am.in ; then
++ list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" "$top_srcdir/"Makefile.am.in | head -n 1`
++ fi
++ for s in $list; do
++ echo $d $s
++ done
++ echo $d $d
++done ) | tsort >> ./_SUBDIRS
++
++for d in $compilelast; do
++ echo $d >> ./_SUBDIRS
++done
++
++test -r _SUBDIRS && mv _SUBDIRS subdirs.top || true
++}
++
++
++### Add HTML header, footer, CSS tags to Doxyfile.
++### Assumes $subdir is set. Argument is a string
++### to stick in front of the file if needed.
++apidox_htmlfiles()
++{
++ dox_header="$top_srcdir/doc/api/$1header.html"
++ dox_footer="$top_srcdir/doc/api/$1footer.html"
++ dox_css="$top_srcdir/doc/api/doxygen.css"
++ test -f "$dox_header" || dox_header="$DOXDATA/$1header.html"
++ test -f "$dox_footer" || dox_footer="$DOXDATA/$1footer.html"
++ test -f "$dox_css" || dox_css="$DOXDATA/doxygen.css"
++
++ echo "HTML_HEADER = $dox_header" >> "$subdir/Doxyfile" ; \
++ echo "HTML_FOOTER = $dox_footer" >> "$subdir/Doxyfile" ; \
++ echo "HTML_STYLESHEET = $dox_css" >> "$subdir/Doxyfile"
++}
++
++apidox_specials()
++{
++ line=`extract_line DOXYGEN_PROJECTNAME "$1"`
++ test -n "$line" && echo "PROJECT_NAME = \"$line\"" >> "$2"
++}
++
++apidox_local()
++{
++ for i in "$top_srcdir/doc/api/Doxyfile.local"
++ do
++ if test -f "$i" ; then
++ cat "$i" >> "$subdir/Doxyfile"
++ break
++ fi
++ done
++}
++
++### Post-process HTML files by substituting in the menu files
++#
++# In non-top directories, both <!-- menu --> and <!-- gmenu -->
++# are calculated and replaced. Top directories get an empty <!-- menu -->
++# if any.
++doxyndex()
++{
++ # Special case top-level to have an empty MENU.
++ if test "x$subdir" = "x." ; then
++ MENU=""
++ htmldir="."
++ htmltop="$top_builddir" # Just ., presumably
++ echo "* Post-processing top-level files"
++ else
++ MENU="<ul>"
++ htmldir="$subdir/html"
++ htmltop="$top_builddir.." # top_builddir ends with /
++ echo "* Post-processing files in $htmldir"
++
++ # Build a little PHP file that maps class names to file
++ # names, for the quick-class-picker functionality.
++ # (The quick-class-picker is disabled due to styling
++ # problems in IE & FF).
++ (
++ echo "<?php \$map = array("; \
++ for htmlfile in `find $htmldir/ -type f -name "class[A-Z]*.html" | grep -v "\-members.html$"`; do
++ classname=`echo $htmlfile | sed -e "s,.*/class\\(.*\\).html,\1," -e "s,_1_1,::,g" -e "s,_01, ,g" -e "s,_4,>,g" -e "s+_00+,+g" -e "s+_3+<+g" | tr "[A-Z]" "[a-z]"`
++ echo " \"$classname\" => \"$htmlfile\","
++ done | sort ; \
++ echo ") ?>"
++ ) > "$subdir/classmap.inc"
++
++ # This is a list of pairs, with / separators so we can use
++ # basename and dirname (a crude shell hack) to split them
++ # into parts. For each, if the file part exists (as a html
++ # file) tack it onto the MENU variable as a <li> with link.
++ for i in "Main Page/index" \
++ "Modules/modules" \
++ "Namespace List/namespaces" \
++ "Class Hierarchy/hierarchy" \
++ "Alphabetical List/classes" \
++ "Class List/annotated" \
++ "File List/files" \
++ "Directories/dirs" \
++ "Namespace Members/namespacemembers" \
++ "Class Members/functions" \
++ "Related Pages/pages"
++ do
++ NAME=`dirname "$i"`
++ FILE=`basename "$i"`
++ test -f "$htmldir/$FILE.html" && MENU="$MENU<li><a href=\"$FILE.html\">$NAME</a></li>"
++ done
++
++ MENU="$MENU</ul>"
++ fi
++
++
++ # Get the list of global Menu entries.
++ GMENU=`cat subdirs | tr -d '\n'`
++
++ PMENU=`grep '<!-- pmenu' "$htmldir/index.html" | sed -e 's+.*pmenu *++' -e 's+ *-->++' | awk '{ c=split($0,a,"/"); for (j=1; j<=c; j++) { printf " / <a href=\""; if (j==c) { printf("."); } for (k=j; k<c; k++) { printf "../"; } if (j<c) { printf("../html/index.html"); } printf "\">%s</a>\n" , a[j]; } }' | tr -d '\n'`
++
++ # Map the PHP file into HTML options so that
++ # it can be substituted in for the quick-class-picker.
++ CMENU=""
++ # For now, leave the CMENU disabled
++ CMENUBEGIN="<!--"
++ CMENUEND="-->"
++
++ if test "x$subdir" = "x." ; then
++ # Disable CMENU on toplevel anyway
++ CMENUBEGIN="<!--"
++ CMENUEND="-->"
++ else
++ test -f "$subdir/classmap.inc" && \
++ CMENU=`grep '=>' "$subdir/classmap.inc" | sed -e 's+"\([^"]*\)" => "'"$subdir/html/"'\([^"]*\)"+<option value="\2">\1<\/option>+' | tr -d '\n'`
++
++ if test -f "$subdir/classmap.inc" && grep "=>" "$subdir/classmap.inc" > /dev/null 2>&1 ; then
++ # Keep the menu, it's useful
++ :
++ else
++ CMENUBEGIN="<!--"
++ CMENUEND="-->"
++ fi
++ fi
++
++ # Now substitute in the MENU in every file. This depends
++ # on HTML_HEADER (ie. header.html) containing the
++ # <!-- menu --> comment.
++ for i in "$htmldir"/*.html
++ do
++ if test -f "$i" ; then
++ sed -e "s+<!-- menu -->+$MENU+" \
++ -e "s+<!-- gmenu -->+$GMENU+" \
++ -e "s+<!-- pmenu.*-->+$PMENU+" \
++ -e "s+<!-- cmenu.begin -->+$CMENUBEGIN+" \
++ -e "s+<!-- cmenu.end -->+$CMENUEND+" \
++ < "$i" | sed -e "s+ at topdir@+$htmltop+g" > "$i.new" && mv "$i.new" "$i"
++ sed -e "s+<!-- cmenu -->+$CMENU+" < "$i" > "$i.new"
++ test -s "$i.new" && mv "$i.new" "$i"
++ fi
++ done
++}
++
++
++
++
++
++
++### Handle the Doxygen processing of a toplevel directory.
++apidox_toplevel()
++{
++ echo ""
++ echo "*** Creating API documentation main page for $module_name"
++ echo "*"
++ rm -f "Doxyfile"
++ for i in "$top_srcdir/doc/api/Doxyfile.global" \
++ "$top_srcdir/admin/Doxyfile.global" \
++ "$DOXDATA/Doxyfile.global"
++ do
++ if test -f "$i" ; then
++ cp "$i" Doxyfile
++ break
++ fi
++ done
++
++ if test ! -f "Doxyfile" ; then
++ echo "* Cannot create Doxyfile."
++ exit 1
++ fi
++
++ cat "$top_builddir/Doxyfile.in" >> Doxyfile
++
++
++ echo "INPUT = $top_srcdir" >> Doxyfile
++ echo "OUTPUT_DIRECTORY = $top_builddir" >> Doxyfile ; \
++ echo "FILE_PATTERNS = *.dox" >> Doxyfile ; \
++ echo "RECURSIVE = NO" >> Doxyfile ; \
++ echo "ALPHABETICAL_INDEX = NO" >> Doxyfile ; \
++ echo "HTML_OUTPUT = ." >> Doxyfile ; \
++ apidox_htmlfiles "main"
++
++ # KDevelop has a top-level Makefile.am with settings.
++ for i in "$top_srcdir/Makefile.am.in" "$top_srcdir/Makefile.am"
++ do
++ if test -f "$i" ; then
++ grep '^DOXYGEN_SET_' "$i" | \
++ sed -e 's+DOXYGEN_SET_++' -e "s+ at topdir@+$top_srcdir+" >> Doxyfile
++ apidox_specials "$srcdir/Makefile.am" "$subdir/Doxyfile"
++
++ break
++ fi
++ done
++
++ apidox_local
++
++ doxygen Doxyfile
++
++ ( cd "$top_srcdir" && grep -l '^include.*Doxyfile.am' `find . -name Makefile.am` ) | sed -e 's+/Makefile.am$++' -e 's+^\./++' | sort > subdirs.in
++ for i in `cat subdirs.in`
++ do
++ test "x." = "x$i" && continue;
++
++ dir=`dirname "$i"`
++ file=`basename "$i"`
++ if test "x." = "x$dir" ; then
++ dir=""
++ else
++ dir="$dir/"
++ fi
++ indent=`echo "$dir" | sed -e 's+[^/]*/+\ \ +g' | sed -e 's+&+\\\&+g'`
++ entryname=`extract_line DOXYGEN_SET_PROJECT_NAME "$top_srcdir/$dir/$file/Makefile.am"`
++ test -z "$entryname" && entryname="$file"
++
++ if grep DOXYGEN_EMPTY "$top_srcdir/$dir/$file/Makefile.am" > /dev/null 2>&1 ; then
++ echo "<li>$indent$file</li>"
++ else
++ echo "<li>$indent<a href=\"@topdir@/$dir$file/html/index.html\">$entryname</a></li>"
++ fi
++ done > subdirs
++
++ doxyndex
++}
++
++### Handle the Doxygen processing of a non-toplevel directory.
++apidox_subdir()
++{
++ echo ""
++ echo "*** Creating apidox in $subdir"
++ echo "*"
++ rm -f "$subdir/Doxyfile"
++ if test ! -d "$top_srcdir/$subdir" ; then
++ echo "* No source (sub)directory $subdir"
++ return
++ fi
++ for i in "$top_srcdir/doc/api/Doxyfile.global" \
++ "$top_srcdir/admin/Doxyfile.global" \
++ "$DOXDATA/Doxyfile.global"
++ do
++ if test -f "$i" ; then
++ cp "$i" "$subdir/Doxyfile"
++ break
++ fi
++ done
++
++
++ test -f "Doxyfile.in" || create_doxyfile_in
++ cat "Doxyfile.in" >> "$subdir/Doxyfile"
++
++ echo "PROJECT_NAME = \"$subdir\"" >> "$subdir/Doxyfile"
++ echo "INPUT = $srcdir" >> "$subdir/Doxyfile"
++ echo "OUTPUT_DIRECTORY = ." >> "$subdir/Doxyfile"
++ if grep -l "$subdir/" subdirs.in > /dev/null 2>&1 ; then
++ echo "RECURSIVE = NO" >> "$subdir/Doxyfile"
++ fi
++ echo "HTML_OUTPUT = $subdir/html" >> "$subdir/Doxyfile"
++ echo "GENERATE_TAGFILE = $subdir/$subdirname.tag" >> "$subdir/Doxyfile"
++ test -d "$top_srcdir/doc/api" && \
++ echo "IMAGE_PATH = $top_srcdir/doc/api" >> "$subdir/Doxyfile"
++
++ apidox_htmlfiles ""
++
++ # Makefile.ams may contain overrides to our settings,
++ # so copy them in.
++ grep '^DOXYGEN_SET_' "$srcdir/Makefile.am" | \
++ sed -e 's+DOXYGEN_SET_++' >> "$subdir/Doxyfile"
++ apidox_specials "$srcdir/Makefile.am" "$subdir/Doxyfile"
++
++ excludes=`extract_line DOXYGEN_EXCLUDE`
++ if test -n "$excludes"; then
++ patterns=""
++ dirs=""
++ for item in `echo "$excludes"`; do
++ if test -d "$top_srcdir/$subdir/$item"; then
++ dirs="$dirs $top_srcdir/$subdir/$item/"
++ else
++ patterns="$patterns $item"
++ fi
++ done
++ echo "EXCLUDE_PATTERNS += $patterns" >> "$subdir/Doxyfile"
++ echo "EXCLUDE += $dirs" >> "$subdir/Doxyfile"
++ fi
++
++ echo "TAGFILES = \\" >> "$subdir/Doxyfile"
++ ## For now, don't support \ continued references lines
++ tags=`extract_line DOXYGEN_REFERENCES`
++ for i in $tags qt ; do
++ tagsubdir=`dirname $i` ; tag=`basename $i`
++ tagpath=""
++ not_found=""
++
++ if test "x$tagsubdir" = "x." ; then
++ tagsubdir=""
++ else
++ tagsubdir="$tagsubdir/"
++ fi
++
++ # Find location of tag file
++ if test -f "$tagsubdir$tag/$tag.tag" ; then
++ file="$tagsubdir$tag/$tag.tag"
++ loc="$tagsubdir$tag/html"
++ else
++ # This checks for dox built with_out_ --no-modulename
++ # in the same build dir as this dox run was started in.
++ file=`ls -1 ../*-apidocs/"$tagsubdir$tag/$tag.tag" 2> /dev/null`
++
++ if test -n "$file" ; then
++ loc=`echo "$file" | sed -e "s/$tag.tag\$/html/"`
++ else
++ # If the tag file doesn't exist yet, but should
++ # because we have the right dirs here, queue
++ # this directory for re-processing later.
++ if test -d "$top_srcdir/$tagsubdir$tag" ; then
++ echo "* Need to re-process $subdir for tag $i"
++ echo "$subdir" >> "subdirs.later"
++ else
++ # Re-check in $PREFIX if needed.
++ test -n "$PREFIX" && \
++ file=`cd "$PREFIX" && \
++ ls -1 *-apidocs/"$tagsubdir$tag/$tag.tag" 2> /dev/null`
++
++ # If something is found, patch it up. The location must be
++ # relative to the installed location of the dox and the
++ # file must be absolute.
++ if test -n "$file" ; then
++ loc=`echo "../$file" | sed -e "s/$tag.tag\$/html/"`
++ file="$PREFIX/$file"
++ echo "* Tags for $tagsubdir$tag will only work when installed."
++ not_found="YES"
++ fi
++ fi
++ fi
++ fi
++ if test "$tag" = "qt" ; then
++ if test -z "$QTDOCDIR" ; then
++ echo " $file" >> "$subdir/Doxyfile"
++ else
++ if test -z "$file" ; then
++ # Really no Qt tags
++ echo "" >> "$subdir/Doxyfile"
++ else
++ echo " $file=$QTDOCDIR" >> "$subdir/Doxyfile"
++ fi
++ fi
++ else
++ if test -n "$file" ; then
++ test -z "$not_found" && echo "* Found tag $file"
++ echo " $file=../$top_builddir$loc \\" >> "$subdir/Doxyfile"
++ fi
++ fi
++ done
++
++ apidox_local
++
++ if grep '^DOXYGEN_EMPTY' "$srcdir/Makefile.am" > /dev/null 2>&1 ; then
++ # This directory is empty, so don't process it, but
++ # *do* handle subdirs that might have dox.
++ :
++ else
++ # Regular processing
++ doxygen "$subdir/Doxyfile"
++ doxyndex
++ fi
++}
++
++### Run a given subdir by setting up global variables first.
++do_subdir()
++{
++ subdir=`echo "$1" | sed -e 's+/$++'`
++ srcdir="$top_srcdir/$subdir"
++ subdirname=`basename "$subdir"`
++ mkdir -p "$subdir" 2> /dev/null
++ if test ! -d "$subdir" ; then
++ echo "Can't create dox subdirectory $subdir"
++ return
++ fi
++ top_builddir=`echo "/$subdir" | sed -e 's+/[^/]*+../+g'`
++ apidox_subdir
++}
++
++
++### Create installdox-slow in the toplevel
++create_installdox()
++{
++# Fix up the installdox script so it accepts empty args
++#
++# This code is copied from the installdox generated by Doxygen,
++# copyright by Dimitri van Heesch and released under the GPL.
++# This does a _slow_ update of the dox, because it loops
++# over the given substitutions instead of assuming all the
++# needed ones are given.
++#
++cat <<\EOF
++#! /usr/bin/env perl
++
++%subst = () ;
++$quiet = 0;
++
++if (open(F,"search.cfg"))
++{
++ $_=<F> ; s/[ \t\n]*$//g ; $subst{"_doc"} = $_;
++ $_=<F> ; s/[ \t\n]*$//g ; $subst{"_cgi"} = $_;
++}
++
++while ( @ARGV ) {
++ $_ = shift @ARGV;
++ if ( s/^-// ) {
++ if ( /^l(.*)/ ) {
++ $v = ($1 eq "") ? shift @ARGV : $1;
++ ($v =~ /\/$/) || ($v .= "/");
++ $_ = $v;
++ if ( /(.+)\@(.+)/ ) {
++ $subst{$1} = $2;
++ } else {
++ print STDERR "Argument $_ is invalid for option -l\n";
++ &usage();
++ }
++ }
++ elsif ( /^q/ ) {
++ $quiet = 1;
++ }
++ elsif ( /^\?|^h/ ) {
++ &usage();
++ }
++ else {
++ print STDERR "Illegal option -$_\n";
++ &usage();
++ }
++ }
++ else {
++ push (@files, $_ );
++ }
++}
++
++
++if ( ! @files ) {
++ if (opendir(D,".")) {
++ foreach $file ( readdir(D) ) {
++ $match = ".html";
++ next if ( $file =~ /^\.\.?$/ );
++ ($file =~ /$match/) && (push @files, $file);
++ ($file =~ "tree.js") && (push @files, $file);
++ }
++ closedir(D);
++ }
++}
++
++if ( ! @files ) {
++ print STDERR "Warning: No input files given and none found!\n";
++}
++
++foreach $f (@files)
++{
++ if ( ! $quiet ) {
++ print "Editing: $f...\n";
++ }
++ $oldf = $f;
++ $f .= ".bak";
++ unless (rename $oldf,$f) {
++ print STDERR "Error: cannot rename file $oldf\n";
++ exit 1;
++ }
++ if (open(F,"<$f")) {
++ unless (open(G,">$oldf")) {
++ print STDERR "Error: opening file $oldf for writing\n";
++ exit 1;
++ }
++ if ($oldf ne "tree.js") {
++ while (<F>) {
++ foreach $sub (keys %subst) {
++ s/doxygen\=\"$sub\:([^ \"\t\>\<]*)\" (href|src)=\"\1/doxygen\=\"$sub:$subst{$sub}\" \2=\"$subst{$sub}/g;
++ print G "$_";
++ }
++ }
++ }
++ else {
++ while (<F>) {
++ foreach $sub (keys %subst) {
++ s/\"$sub\:([^ \"\t\>\<]*)\", \"\1/\"$sub:$subst{$sub}\" ,\"$subst{$sub}/g;
++ print G "$_";
++ }
++ }
++ }
++ }
++ else {
++ print STDERR "Warning file $f does not exist\n";
++ }
++ unlink $f;
++}
++
++sub usage {
++ print STDERR "Usage: installdox [options] [html-file [html-file ...]]\n";
++ print STDERR "Options:\n";
++ print STDERR " -l tagfile\@linkName tag file + URL or directory \n";
++ print STDERR " -q Quiet mode\n\n";
++ exit 1;
++}
++EOF
++}
++
++# Do only the subdirs that match the RE passed in as $1
++do_subdirs_re()
++{
++ RE=`echo "$1" | sed -e 's+/$++'`
++
++ # Here's a queue of dirs to re-process later when
++ # all the rest have been done already.
++ > subdirs.later
++
++ # subdirs.top lists _all_ subdirs of top in the order they
++ # should be handled; subdirs.in lists those dirs that contain
++ # dox. So the intersection of the two is the ordered list
++ # of top-level subdirs that contain dox.
++ #
++ # subdirs.top also doesn't contain ".", so that special
++ # case can be ignored in the loop.
++
++
++ (
++ for i in `grep "^$RE" subdirs.top`
++ do
++ if test "x$i" = "x." ; then
++ continue
++ fi
++ # Calculate intersection of this element and the
++ # set of dox dirs.
++ if grep "^$i\$" subdirs.in > /dev/null 2>&1 ; then
++ echo "$i"
++ mkdir -p "$i" 2> /dev/null
++
++ # Handle the subdirs of this one
++ for j in `grep "$i/" subdirs.in`
++ do
++ echo "$j"
++ mkdir -p "$j" 2> /dev/null
++ done
++ fi
++ done
++
++ # Now we still need to handle whatever is left
++ for i in `cat subdirs.in`
++ do
++ test -d "$i" || echo "$i"
++ mkdir -p "$i" 2> /dev/null
++ done
++ ) > subdirs.sort
++ for i in `cat subdirs.sort`
++ do
++ do_subdir "$i"
++ done
++
++ if test -s "subdirs.later" ; then
++ sort subdirs.later | uniq > subdirs.sort
++ for i in `cat subdirs.sort`
++ do
++ : > subdirs.later
++ echo "*** Reprocessing $i"
++ do_subdir "$i"
++ test -s "subdirs.later" && echo "* Some tag files were still not found."
++ done
++ fi
++}
++
++if test "x." = "x$top_builddir" ; then
++ apidox_toplevel
++ create_subdirs
++ create_installdox > installdox-slow
++ if test "x$recurse" = "x1" ; then
++ if test "x$module_name" = "xkdelibs" ; then
++ if test -z "$QTDOCTAG" && test -d "$QTDOCDIR" && \
++ test ! -f "qt/qt.tag" ; then
++ # Special case: create a qt tag file.
++ echo "*** Creating a tag file for the Qt library:"
++ mkdir qt
++ doxytag -t qt/qt.tag "$QTDOCDIR" > /dev/null 2>&1
++ fi
++ fi
++ if test -n "$QTDOCTAG" && test -r "$QTDOCTAG" ; then
++ echo "*** Copying tag file for the Qt library:"
++ mkdir qt
++ cp "$QTDOCTAG" qt/qt.tag
++ fi
++
++ do_subdirs_re "."
++
++ fi
++else
++ if test "x$recurse" = "x1" ; then
++ do_subdirs_re "$subdir"
++ else
++ do_subdir "$subdir"
++ fi
++fi
++
++
++# At the end of a run, clean up stuff.
++if test "YES" = "$cleanup" ; then
++ rm -f subdirs.in subdirs.later subdirs.sort subdirs.top Doxyfile.in
++ rm -f `find . -name Doxyfile`
++ rm -f qt/qt.tag
++ rmdir qt > /dev/null 2>&1
++fi
++
++
++exit 0
++
+--- a/admin/extractrc
++++ /dev/null
+@@ -1,145 +0,0 @@
+-#! /usr/bin/perl
+-#
+-# This script extracts messages from designer (.ui) and XMLGIU (.rc) files
+-# and writes on standard output (usually redirected to rc.cpp)
+-# the equivalent i18n() calls so that xgettext can parse them.
+-#
+-# This version has been adjusted to support the <comment></comment> contents
+-# for i18n context generation by ipwizard at users.sourceforge.net 2006/04/21
+-
+-# known flags:
+-# --tag=name : extract also the tag name
+-# --contect=name : give all i18n calls a context name: i18n( "name",...)
+-
+-$filename = "";
+- at filenames = ();
+-
+-sub writeoutstring
+-{
+- print STDOUT "i18n(\"";
+- if (@_[0])
+- {
+- # We have a I18N context
+- print STDOUT @_[0];
+- print STDOUT "\",\"";
+- }
+- print STDOUT @_[1];
+- print STDOUT "\"); // $filename \n";
+-}
+-
+-$extratags = "";
+-$context = ""; # I18N context
+-
+-ARGUMENTS: while (defined ($ARGV[0]))
+-{
+- $_ = shift;
+-
+- if (/^--tag=(\w+)/) # --tag=name
+- {
+- $extratags .= "|" . $1;
+- next ARGUMENTS;
+- }
+- elsif (/^--context=(\w+)/) # --context=name
+- {
+- $context = $1;
+- next ARGUMENTS;
+- }
+-
+- $filename = $_; # maybe check for more options
+-
+-if (! $filename) {
+- print STDERR "no file to open\n";
+- exit 1;
+-}
+-
+-$string = "";
+-$text = "";
+-$intext = 0;
+-$incomment = 0;
+-$linenr = 0;
+-$inskippedprop = 0;
+-$textpending = 0;
+-
+-$commentstring = 'comment>';
+-
+-open(FILE, $filename);
+-
+-READING: while ( <FILE> ) {
+- $linenr++;
+- if ($linenr == 1 && ($_ !~ /^<!DOCTYPE/) && ($_ !~ /^<\?xml/)) {
+- last READING;
+- }
+-
+- $string .= "\\n" . $_;
+- chomp($string);
+-
+- $textstring = '([tT][eE][xX][tT]|title|string|whatsthis|tooltip|label' . $extratags .')>';
+-
+- # The 'database' property contains strings that shouldn't be translated
+- if ($inskippedprop == 0 && ($string =~ /<property name=\"database\"/ || $string=~ /<property name=\"associations\"/)) {
+- $inskippedprop = 1;
+- } elsif ($inskippedprop == 1 && ($string =~ /<\/property/)) {
+- $inskippedprop = 0;
+- $string = "";
+- }
+-
+- if ($inskippedprop == 0 && $intext == 0) {
+- if ($string =~ /<$textstring/) {
+- $string =~ s/^.*<$textstring//;
+- $intext = 1;
+- $starting_linenr = $linenr;
+- } elsif ($string =~ /<$commentstring/) {
+- $string =~ s/^.*<$commentstring//;
+- $incomment = 1;
+- $textpending = 0;
+- } else {
+- $string = "";
+- }
+- }
+-
+- if ($textpending == 1) {
+- writeoutstring("", $text) if(length($text) != 0);
+- $textpending = 0;
+- }
+-
+- if (($incomment == 1) && ($string =~ /<\/$commentstring/)) {
+- my $ctx = $string;
+- $ctx =~ s/<\/$commentstring.*$//;
+- $ctx =~ s/</</g;
+- $ctx =~ s/>/>/g;
+- $ctx =~ s/&/&/g;
+- $ctx =~ s/\\([^n])/\\\\$1/g;
+- writeoutstring($ctx, $text) if(length($ctx) != 0 && length($text) != 0);
+- $string =~ s/^.*<\/$commentstring//;
+- $incomment = 0;
+- }
+-
+- if (($intext == 1) && ($string =~ /<\/$textstring/)) {
+- $text = $string;
+- $text =~ s/<\/$textstring.*$//;
+- $text =~ s/</</g;
+- $text =~ s/>/>/g;
+- $text =~ s/&/&/g;
+- $text =~ s/\\([^n])/\\\\$1/g;
+- $text =~ s/\"/\\\"/g;
+- if(length($context) != 0) {
+- writeoutstring($context, $text);
+- } else {
+- $textpending = 1;
+- }
+- $string =~ s/^.*<\/$textstring//;
+- $intext = 0;
+- # Text can be multiline in .ui files (possibly), but we warn about it in XMLGUI .rc files.
+- if ($linenr != $starting_linenr && $filename =~ m/\.rc$/) {
+- print STDERR "there is <text> floating $filename\n";
+- }
+- }
+-
+-}
+-
+-if (($intext == 1) || ($incomment == 1) || ($textpending == 1)) {
+- print STDERR "parsing error in $filename $linenr\n";
+- exit 1;
+-}
+-
+-}
+--- a/admin/fixuifiles
++++ /dev/null
+@@ -1,293 +0,0 @@
+-#!/usr/bin/perl -w
+-# fixuifiles processes .ui files and removes some insanity:
+-# * Too high minimum Qt version (see $minversion_* in the top of the script)
+-# * Hardcoded untranslatable Alt+Letter accels (auto-added by Qt Designer)
+-# * Captions that are equal to classname (auto-added by Qt Designer)
+-
+-# This script is licensed under the GPL version 2.
+-# (c) 2004 David Faure <faure at kde.org>
+-# Based on fixkdeincludes, (c) 2001-2003 Dirk Mueller <mueller at kde.org>
+-
+-use strict;
+-use File::Basename;
+-use Cwd;
+-
+-# Fix the version number in .ui files if it's bigger than this:
+-my $default_minversion_maj = 3;
+-my $default_minversion_min = 3;
+-
+-# Known words which are ok as captions
+-my %knowncaptions = (
+- 'Settings' => '',
+- 'Statistics' => '',
+- 'General' => '',
+- 'Tracks' => '',
+- 'Constants' => '',
+- 'Preferences' => '',
+- 'Encryption' => ''
+-);
+-
+-# declaration of useful subroutines
+-sub process_ui_file($);
+-sub find_ui_files($);
+-sub read_required_version($);
+-
+-# some global variables
+-my $verbose = 0; # turns on debugging
+-my $omit_Qt_check = 0; # turns off Qt version checking
+-my @explicitfiles = (); # filled in if passing files on the command line
+-my $minversion_maj = $default_minversion_maj;
+-my $minversion_min = $default_minversion_min;
+-
+-while (defined ($ARGV[0]))
+-{
+- $_ = shift;
+- if (/^--help$|^-h$/) {
+- print "Usage: fixuifiles [OPTIONS] files...\n";
+- print "Options are:\n";
+- print "\t-v, --verbose\tBe verbose\n";
+- print "\t--omitqtcheck\tDoes not check for Qt minimum version\n";
+- exit 0;
+- }
+- elsif (/^--verbose$|^-v$/) {
+- $verbose = 1;
+- }elsif (/^--omitqtcheck/) {
+- $omit_Qt_check = 1;
+- }
+- elsif (!/^-/) {
+- push @explicitfiles, $_;
+- }
+-}
+-
+-# Find .ui files in the given dir
+-sub find_ui_files($)
+-{
+- my ( $dir ) = @_;
+-
+- opendir (DIR, "$dir") || die "Couldn't read '$dir'\n";
+- my @files = grep { /^.*\.ui$/ } readdir(DIR);
+- closedir(DIR);
+-
+- #print "found files: [ " . join(' ', @files) . " ] in $dir\n" if ($verbose);
+-
+- # prefix them with $dir
+- my @retfiles = ();
+- foreach my $file(@files) {
+- push @retfiles, "$dir/$file";
+- }
+-
+- return @retfiles;
+-}
+-
+-# Ensure the version at the top of the file is not too high
+-sub fix_version($)
+-{
+- my $srcfile = shift @_;
+- open(SRC, "< $srcfile") || die "fix_version: couldn't open '$srcfile'\n";
+- my @contents = <SRC>;
+- my @fixedcontents = ();
+- close(SRC);
+- my $needfix = 0;
+- my $foundversion = 0;
+- foreach my $line (@contents) {
+- if (!$foundversion && $line =~ m/version=\"([0-9]+)\.([0-9]+)(\.[0-9]+)?\"/) {
+- my $version_maj = $1;
+- my $version_min = $2;
+- if ( $version_maj > $minversion_maj ||
+- ( $version_maj == $minversion_maj && $version_min > $minversion_min ) ) {
+- $line =~ s/version=\"[0-9]+\.[0-9]+\"/version=\"$minversion_maj.$minversion_min\"/o;
+- $needfix = 1;
+- print "$srcfile: version was $version_maj.$version_min, set to $minversion_maj.$minversion_min\n";
+- }
+- $foundversion = 1;
+- }
+- push @fixedcontents, $line;
+- }
+- if (!$foundversion) {
+- # TODO improve so that the script adds the necessary line
+- print "$srcfile has no UI version, please fix it\n";
+- }
+- if ($needfix) {
+- open(SRC, "> $srcfile") || die "fix_version: couldn't open '$srcfile' for writing\n";
+- print SRC @fixedcontents;
+- close(SRC);
+- }
+-}
+-
+-# Ensure no auto-added Alt+letter accel exists - those are untranslatable
+-sub fix_accels($)
+-{
+- my $srcfile = shift @_;
+- open(SRC, "< $srcfile") || die "fix_accels: couldn't open '$srcfile'\n";
+- my @contents = <SRC>;
+- close(SRC);
+- return if ( !grep( /<string>Alt\+[A-Z]<\/string>/, @contents ));
+- my @fixedcontents = ();
+-
+- my $firstline;
+- my $accelsremoved = 0;
+- my $inside_accel = 0;
+- # inside_accel is 0 before <property>
+- # 1 after <property> and before <string>
+- # 2 after <string> if alt+letter, and before </property>
+- foreach my $line (@contents) {
+- if ( $inside_accel == 1 ) {
+- if ( $line =~ m/<string>(Alt\+[A-Z])<\/string>/ ) {
+- print "$srcfile: accel $1 removed\n" if ($verbose);
+- $inside_accel = 2;
+- $accelsremoved++;
+- } else { # Not alt+letter, keep accel
+- push @fixedcontents, $firstline;
+- $inside_accel = 0;
+- }
+- }
+- if ($line =~ m/property name=\"accel\"/) {
+- $inside_accel = 1;
+- $firstline = $line;
+- }
+- if ($inside_accel == 0) {
+- push @fixedcontents, $line;
+- }
+- $inside_accel = 0 if ($inside_accel && $line =~ m/<\/property>/);
+- }
+- if ($accelsremoved) {
+- print "$srcfile: $accelsremoved accels removed\n";
+- open(SRC, "> $srcfile") || die "fix_accels: couldn't open '$srcfile' for writing\n";
+- print SRC @fixedcontents;
+- close(SRC);
+- }
+-}
+-
+-# Ensure no auto-added caption exists - it's pretty stupid to have to
+-# translate Form1 or MyClassName
+-sub fix_captions($)
+-{
+- my $srcfile = shift @_;
+- open(SRC, "< $srcfile") || die "fix_captions: couldn't open '$srcfile'\n";
+- my @contents = <SRC>;
+- close(SRC);
+- my @fixedcontents = ();
+-
+- my $firstline;
+- my $class = "";
+- my $captionsremoved = 0;
+- my $inside_caption = 0;
+- # inside_caption is 0 before <property>
+- # 1 after <property> and before <string>
+- # 2 after <string> if caption should be removed, and before </property>
+- foreach my $line (@contents) {
+- $class = $1 if ($line =~ m/<class>(.*)<\/class>/);
+- if ( $inside_caption == 1 ) {
+- $line =~ m/<string>(.*)<\/string>/ || die "Malformed XML (no string under caption)";
+- my $caption = $1;
+- print "$srcfile: caption='$caption' class='$class'\n" if ($verbose);
+- if ( ( $caption eq $class && !defined $knowncaptions{$caption} ) ||
+- ($caption =~ m/Form[0-9]/) ) {
+- if ( $caption =~ m/^[A-Z][a-z]*$/ ) {
+- print "$srcfile: removing caption '$caption' (warning! could be real caption)\n";
+- } else {
+- print "$srcfile: removing caption '$caption'\n";
+- }
+- $inside_caption = 2;
+- $captionsremoved++;
+- } else { # Real caption, keep it
+- print "$srcfile: keeping caption '$caption'\n" if ($verbose);
+- push @fixedcontents, $firstline;
+- $inside_caption = 0;
+- }
+- }
+- if ($line =~ m/property name=\"caption\"/) {
+- $inside_caption = 1;
+- $firstline = $line;
+- }
+- if ($inside_caption == 0) {
+- push @fixedcontents, $line;
+- }
+- $inside_caption = 0 if ($inside_caption && $line =~ m/<\/property>/);
+- }
+- if ($captionsremoved) {
+- open(SRC, "> $srcfile") || die "fix_captions: couldn't open '$srcfile' for writing\n";
+- print SRC @fixedcontents;
+- close(SRC);
+- }
+-}
+-
+-# Find a .qt_minversion in $dir or any parent directory.
+-sub read_required_version($)
+-{
+- my $dir = Cwd::abs_path( shift @_ );
+-
+- $minversion_maj = $default_minversion_maj;
+- $minversion_min = $default_minversion_min;
+- while ( length($dir) > 1 ) {
+- my $versfile = "$dir/.qt_minversion";
+- my $version;
+- if ( open (VERSFILE, "< $versfile") ) {
+- while (<VERSFILE>) {
+- $version = $_ if (!/^#/);
+- }
+- close(VERSFILE);
+- } else {
+- $versfile = "$dir/configure.in.in";
+- if ( open (VERSFILE, "< $versfile") ) {
+- while (<VERSFILE>) {
+- $version = $1 if m/^#MIN_CONFIG\(([0-9]+.[0-9]+)\)/;
+- }
+- close(VERSFILE);
+- }
+- }
+- if (defined $version && $version =~ m/([0-9]+)\.([0-9]+)/) {
+- $minversion_maj = $1;
+- $minversion_min = $2;
+- print "Found min version $1.$2 in $versfile\n" if ($verbose);
+- return;
+- }
+- $dir = dirname($dir);
+- }
+-}
+-
+-# Process one .ui file
+-sub process_ui_file($)
+-{
+- my $file = shift @_;
+- &read_required_version( dirname($file) );
+-
+- print "Checking: $file\n" if($verbose);
+- &fix_version($file) if(!$omit_Qt_check);
+- &fix_accels($file);
+- &fix_captions($file);
+-}
+-
+-#############################################################################
+-# here is the main logic
+-#
+-
+-# process files from the command line, if any
+-if ( $#explicitfiles >= 0 ) {
+- foreach my $file( @explicitfiles ) {
+- &process_ui_file( $file );
+- }
+- exit 0;
+-}
+-
+-# first generate a list of subdirectories
+-my @dirlist = ();
+-push @dirlist, ".";
+-foreach my $dir ( @dirlist ) {
+- opendir (DIR, "$dir") || warn "Couldn't read '$dir'";
+- my $subdir = "";
+- while( $subdir = readdir(DIR)) {
+- next if ($subdir =~ /^\./);
+- next if !( -d "$dir/$subdir");
+- push @dirlist, "$dir/$subdir";
+- }
+- closedir(DIR);
+-}
+-
+-# now iterate over all subdirs
+-foreach my $dir(@dirlist) {
+- my @uifile = find_ui_files($dir);
+- foreach my $file(@uifile) {
+- &process_ui_file($file);
+- }
+-}
+--- a/admin/install-sh
++++ b/admin/install-sh
+@@ -1,19 +1,38 @@
+ #!/bin/sh
+-#
+ # install - install a program, script, or datafile
+-# This comes from X11R5 (mit/util/scripts/install.sh).
++
++scriptversion=2005-11-07.23
++
++# This originates from X11R5 (mit/util/scripts/install.sh), which was
++# later released in X11R6 (xc/config/util/install.sh) with the
++# following copyright and license.
++#
++# Copyright (C) 1994 X Consortium
++#
++# Permission is hereby granted, free of charge, to any person obtaining a copy
++# of this software and associated documentation files (the "Software"), to
++# deal in the Software without restriction, including without limitation the
++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++# sell copies of the Software, and to permit persons to whom the Software is
++# furnished to do so, subject to the following conditions:
++#
++# The above copyright notice and this permission notice shall be included in
++# all copies or substantial portions of the Software.
++#
++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++#
++# Except as contained in this notice, the name of the X Consortium shall not
++# be used in advertising or otherwise to promote the sale, use or other deal-
++# ings in this Software without prior written authorization from the X Consor-
++# tium.
+ #
+-# Copyright 1991 by the Massachusetts Institute of Technology
+ #
+-# Permission to use, copy, modify, distribute, and sell this software and its
+-# documentation for any purpose is hereby granted without fee, provided that
+-# the above copyright notice appear in all copies and that both that
+-# copyright notice and this permission notice appear in supporting
+-# documentation, and that the name of M.I.T. not be used in advertising or
+-# publicity pertaining to distribution of the software without specific,
+-# written prior permission. M.I.T. makes no representations about the
+-# suitability of this software for any purpose. It is provided "as is"
+-# without express or implied warranty.
++# FSF changes to this file are in the public domain.
+ #
+ # Calling this script install-sh is preferred over install.sh, to prevent
+ # `make' implicit rules from creating a file called install from it
+@@ -23,13 +42,11 @@
+ # from scratch. It can only install one file at a time, a restriction
+ # shared with many OS's install programs.
+
+-
+ # set DOITPROG to echo to test this script
+
+ # Don't use :- since 4.3BSD and earlier shells don't like it.
+ doit="${DOITPROG-}"
+
+-
+ # put in absolute paths if you don't have them in your path; or use env. vars.
+
+ mvprog="${MVPROG-mv}"
+@@ -41,236 +58,344 @@
+ rmprog="${RMPROG-rm}"
+ mkdirprog="${MKDIRPROG-mkdir}"
+
+-transformbasename=""
+-transform_arg=""
+-instcmd="$mvprog"
+-chmodcmd="$chmodprog 0755"
+-chowncmd=""
+-chgrpcmd=""
+-stripcmd=""
++posix_glob=
++posix_mkdir=
++
++# Symbolic mode for testing mkdir with directories.
++# It is the same as 755, but also tests that "u+" works.
++test_mode=u=rwx,g=rx,o=rx,u+wx
++
++# Desired mode of installed file.
++mode=0755
++
++# Desired mode of newly created intermediate directories.
++# It is empty if not known yet.
++intermediate_mode=
++
++chmodcmd=$chmodprog
++chowncmd=
++chgrpcmd=
++stripcmd=
+ rmcmd="$rmprog -f"
+ mvcmd="$mvprog"
+-src=""
+-dst=""
+-dir_arg=""
+-
+-while [ x"$1" != x ]; do
+- case $1 in
+- -c) instcmd=$cpprog
+- shift
+- continue;;
+-
+- -d) dir_arg=true
+- shift
+- continue;;
+-
+- -m) chmodcmd="$chmodprog $2"
+- shift
+- shift
+- continue;;
+-
+- -o) chowncmd="$chownprog $2"
+- shift
+- shift
+- continue;;
+-
+- -g) chgrpcmd="$chgrpprog $2"
+- shift
+- shift
+- continue;;
+-
+- -s) stripcmd=$stripprog
+- shift
+- continue;;
+-
+- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+- shift
+- continue;;
+-
+- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+- shift
+- continue;;
+-
+- *) if [ x"$src" = x ]
+- then
+- src=$1
+- else
+- # this colon is to work around a 386BSD /bin/sh bug
+- :
+- dst=$1
+- fi
+- shift
+- continue;;
+- esac
+-done
+-
+-if [ x"$src" = x ]
+-then
+- echo "$0: no input file specified" >&2
+- exit 1
+-else
+- :
+-fi
+-
+-if [ x"$dir_arg" != x ]; then
+- dst=$src
+- src=""
+-
+- if [ -d "$dst" ]; then
+- instcmd=:
+- chmodcmd=""
+- else
+- instcmd=$mkdirprog
+- fi
+-else
+-
+-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+-# might cause directories to be created, which would be especially bad
+-# if $src (and thus $dsttmp) contains '*'.
+-
+- if [ -f "$src" ] || [ -d "$src" ]
+- then
+- :
+- else
+- echo "$0: $src does not exist" >&2
+- exit 1
+- fi
+-
+- if [ x"$dst" = x ]
+- then
+- echo "$0: no destination specified" >&2
+- exit 1
+- else
+- :
+- fi
+-
+-# If destination is a directory, append the input filename; if your system
+-# does not like double slashes in filenames, you may need to add some logic
+-
+- if [ -d "$dst" ]
+- then
+- dst=$dst/`basename "$src"`
+- else
+- :
+- fi
+-fi
+-
+-## this sed command emulates the dirname command
+-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+-
+-# Make sure that the destination directory exists.
+-# this part is taken from Noah Friedman's mkinstalldirs script
+-
+-# Skip lots of stat calls in the usual case.
+-if [ ! -d "$dstdir" ]; then
+-defaultIFS='
+- '
+-IFS="${IFS-$defaultIFS}"
+-
+-oIFS=$IFS
+-# Some sh's can't handle IFS=/ for some reason.
+-IFS='%'
+-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+-IFS=$oIFS
++src=
++dst=
++dir_arg=
++dstarg=
++no_target_directory=
++
++usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
++ or: $0 [OPTION]... SRCFILES... DIRECTORY
++ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
++ or: $0 [OPTION]... -d DIRECTORIES...
++
++In the 1st form, copy SRCFILE to DSTFILE.
++In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
++In the 4th, create DIRECTORIES.
++
++Options:
++-c (ignored)
++-d create directories instead of installing files.
++-g GROUP $chgrpprog installed files to GROUP.
++-m MODE $chmodprog installed files to MODE.
++-o USER $chownprog installed files to USER.
++-s $stripprog installed files.
++-t DIRECTORY install into DIRECTORY.
++-T report an error if DSTFILE is a directory.
++--help display this help and exit.
++--version display version info and exit.
++
++Environment variables override the default commands:
++ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
++"
++
++while test -n "$1"; do
++ case $1 in
++ -c) shift
++ continue;;
++
++ -d) dir_arg=true
++ shift
++ continue;;
++
++ -g) chgrpcmd="$chgrpprog $2"
++ shift
++ shift
++ continue;;
++
++ --help) echo "$usage"; exit $?;;
++
++ -m) mode=$2
++ shift
++ shift
++ continue;;
++
++ -o) chowncmd="$chownprog $2"
++ shift
++ shift
++ continue;;
++
++ -s) stripcmd=$stripprog
++ shift
++ continue;;
+
+-pathcomp=''
++ -t) dstarg=$2
++ shift
++ shift
++ continue;;
+
+-while [ $# -ne 0 ] ; do
+- pathcomp=$pathcomp$1
++ -T) no_target_directory=true
+ shift
++ continue;;
+
+- if [ ! -d "$pathcomp" ] ;
+- then
+- $mkdirprog "$pathcomp"
+- else
+- :
+- fi
++ --version) echo "$0 $scriptversion"; exit $?;;
+
+- pathcomp=$pathcomp/
++ *) # When -d is used, all remaining arguments are directories to create.
++ # When -t is used, the destination is already specified.
++ test -n "$dir_arg$dstarg" && break
++ # Otherwise, the last argument is the destination. Remove it from $@.
++ for arg
++ do
++ if test -n "$dstarg"; then
++ # $@ is not empty: it contains at least $arg.
++ set fnord "$@" "$dstarg"
++ shift # fnord
++ fi
++ shift # arg
++ dstarg=$arg
++ done
++ break;;
++ esac
+ done
++
++if test -z "$1"; then
++ if test -z "$dir_arg"; then
++ echo "$0: no input file specified." >&2
++ exit 1
++ fi
++ # It's OK to call `install-sh -d' without argument.
++ # This can happen when creating conditional directories.
++ exit 0
+ fi
+
+-if [ x"$dir_arg" != x ]
+-then
+- $doit $instcmd "$dst" &&
+-
+- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+-else
+-
+-# If we're going to rename the final executable, determine the name now.
+-
+- if [ x"$transformarg" = x ]
+- then
+- dstfile=`basename "$dst"`
+- else
+- dstfile=`basename "$dst" $transformbasename |
+- sed $transformarg`$transformbasename
+- fi
++test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
+
+-# don't allow the sed command to completely eliminate the filename
++for src
++do
++ # Protect names starting with `-'.
++ case $src in
++ -*) src=./$src ;;
++ esac
++
++ if test -n "$dir_arg"; then
++ dst=$src
++ dstdir=$dst
++ test -d "$dstdir"
++ dstdir_status=$?
++ else
++
++ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
++ # might cause directories to be created, which would be especially bad
++ # if $src (and thus $dsttmp) contains '*'.
++ if test ! -f "$src" && test ! -d "$src"; then
++ echo "$0: $src does not exist." >&2
++ exit 1
++ fi
++
++ if test -z "$dstarg"; then
++ echo "$0: no destination specified." >&2
++ exit 1
++ fi
++
++ dst=$dstarg
++ # Protect names starting with `-'.
++ case $dst in
++ -*) dst=./$dst ;;
++ esac
+
+- if [ x"$dstfile" = x ]
+- then
+- dstfile=`basename "$dst"`
++ # If destination is a directory, append the input filename; won't work
++ # if double slashes aren't ignored.
++ if test -d "$dst"; then
++ if test -n "$no_target_directory"; then
++ echo "$0: $dstarg: Is a directory" >&2
++ exit 1
++ fi
++ dstdir=$dst
++ dst=$dstdir/`basename "$src"`
++ dstdir_status=0
++ else
++ # Prefer dirname, but fall back on a substitute if dirname fails.
++ dstdir=`
++ (dirname "$dst") 2>/dev/null ||
++ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$dst" : 'X\(//\)[^/]' \| \
++ X"$dst" : 'X\(//\)$' \| \
++ X"$dst" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++ echo X"$dst" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'
++ `
++
++ test -d "$dstdir"
++ dstdir_status=$?
++ fi
++ fi
++
++ obsolete_mkdir_used=false
++
++ if test $dstdir_status != 0; then
++ case $posix_mkdir in
++ '')
++ posix_mkdir=false
++ if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
++ posix_mkdir=true
+ else
+- :
+- fi
+-
+-# Make a couple of temp file names in the proper directory.
+-
+- dsttmp=$dstdir/#inst.$$#
+- rmtmp=$dstdir/#rm.$$#
+-
+-# Trap to clean up temp files at exit.
+-
+- trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+- trap '(exit $?); exit' 1 2 13 15
+-
+-# Move or copy the file name to the temp name
+-
+- $doit $instcmd "$src" "$dsttmp" &&
+-
+-# and set any options; do chmod last to preserve setuid bits
+-
+-# If any of these fail, we abort the whole thing. If we want to
+-# ignore errors from any of these, just make sure not to ignore
+-# errors from the above "$doit $instcmd $src $dsttmp" command.
++ # Remove any dirs left behind by ancient mkdir implementations.
++ rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
++ fi ;;
++ esac
+
+- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
++ if
++ $posix_mkdir && {
+
+-# Now remove or move aside any old file at destination location. We try this
+-# two ways since rm can't unlink itself on some systems and the destination
+-# file might be busy for other reasons. In this case, the final cleanup
+-# might fail but the new file should still install successfully.
++ # With -d, create the new directory with the user-specified mode.
++ # Otherwise, create it using the same intermediate mode that
++ # mkdir -p would use when creating intermediate directories.
++ # POSIX says that this mode is "$(umask -S),u+wx", so use that
++ # if umask -S works.
+
+-{
+- if [ -f "$dstdir/$dstfile" ]
+- then
+- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+- $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+- {
+- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+- (exit 1); exit
+- }
++ if test -n "$dir_arg"; then
++ mkdir_mode=$mode
+ else
+- :
++ case $intermediate_mode in
++ '')
++ if umask_S=`(umask -S) 2>/dev/null`; then
++ intermediate_mode=$umask_S,u+wx
++ else
++ intermediate_mode=$test_mode
++ fi ;;
++ esac
++ mkdir_mode=$intermediate_mode
+ fi
+-} &&
+-
+-# Now rename the file to the real destination.
+-
+- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
+-fi &&
++ $mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
++ }
++ then :
++ else
++
++ # mkdir does not conform to POSIX, or it failed possibly due to
++ # a race condition. Create the directory the slow way, step by
++ # step, checking for races as we go.
++
++ case $dstdir in
++ /*) pathcomp=/ ;;
++ -*) pathcomp=./ ;;
++ *) pathcomp= ;;
++ esac
++
++ case $posix_glob in
++ '')
++ if (set -f) 2>/dev/null; then
++ posix_glob=true
++ else
++ posix_glob=false
++ fi ;;
++ esac
++
++ oIFS=$IFS
++ IFS=/
++ $posix_glob && set -f
++ set fnord $dstdir
++ shift
++ $posix_glob && set +f
++ IFS=$oIFS
++
++ for d
++ do
++ test "x$d" = x && continue
++
++ pathcomp=$pathcomp$d
++ if test ! -d "$pathcomp"; then
++ $mkdirprog "$pathcomp"
++ # Don't fail if two instances are running concurrently.
++ test -d "$pathcomp" || exit 1
++ fi
++ pathcomp=$pathcomp/
++ done
++ obsolete_mkdir_used=true
++ fi
++ fi
++
++ if test -n "$dir_arg"; then
++ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
++ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
++ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
++ test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
++ else
++
++ # Make a couple of temp file names in the proper directory.
++ dsttmp=$dstdir/_inst.$$_
++ rmtmp=$dstdir/_rm.$$_
++
++ # Trap to clean up those temp files at exit.
++ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
++
++ # Copy the file name to the temp name.
++ $doit $cpprog "$src" "$dsttmp" &&
++
++ # and set any options; do chmod last to preserve setuid bits.
++ #
++ # If any of these fail, we abort the whole thing. If we want to
++ # ignore errors from any of these, just make sure not to ignore
++ # errors from the above "$doit $cpprog $src $dsttmp" command.
++ #
++ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
++ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
++ && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&
++
++ # Now rename the file to the real destination.
++ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
++ || {
++ # The rename failed, perhaps because mv can't rename something else
++ # to itself, or perhaps because mv is so ancient that it does not
++ # support -f.
++
++ # Now remove or move aside any old file at destination location.
++ # We try this two ways since rm can't unlink itself on some
++ # systems and the destination file might be busy for other
++ # reasons. In this case, the final cleanup might fail but the new
++ # file should still install successfully.
++ {
++ if test -f "$dst"; then
++ $doit $rmcmd -f "$dst" 2>/dev/null \
++ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
++ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
++ || {
++ echo "$0: cannot unlink or rename $dst" >&2
++ (exit 1); exit 1
++ }
++ else
++ :
++ fi
++ } &&
++
++ # Now rename the file to the real destination.
++ $doit $mvcmd "$dsttmp" "$dst"
++ }
++ } || exit 1
+
+-# The final little trick to "correctly" pass the exit status to the exit trap.
++ trap '' 0
++ fi
++done
+
+-{
+- (exit 0); exit
+-}
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+--- a/admin/libtool.m4.in
++++ b/admin/libtool.m4.in
+@@ -15,7 +15,7 @@
+ ##
+ ## You should have received a copy of the GNU General Public License
+ ## along with this program; if not, write to the Free Software
+-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ ##
+ ## As a special exception to the GNU General Public License, if you
+ ## distribute this file as part of a program that contains a
+@@ -1273,7 +1273,7 @@
+ dynamic_linker=no
+ ;;
+
+-freebsd*-gnu*)
++kfreebsd*-gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+@@ -1424,7 +1424,7 @@
+ libsuff=
+ if test "x$LINUX_64_MODE" = x64; then
+ # Some platforms are per default 64-bit, so there's no /lib64
+- if test -d /lib64; then
++ if test -d /lib64 -a ! -h /lib64; then
+ libsuff=64
+ fi
+ fi
+@@ -2119,7 +2119,7 @@
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-freebsd*)
++freebsd* | kfreebsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+@@ -2560,18 +2560,29 @@
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ case "$host_os" in
+ rhapsody* | darwin1.[[012]])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress'
+ ;;
+ *) # Darwin 1.3 on
+- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[012])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup'
++ ;;
++ esac
++ fi
+ ;;
+ esac
+ output_verbose_link_cmd='echo'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
+- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+@@ -2688,8 +2699,8 @@
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -2715,7 +2726,7 @@
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+@@ -2809,13 +2820,13 @@
+ _LT_AC_SYS_LIBPATH_AIX
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+@@ -2830,7 +2841,7 @@
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds it's shared libraries.
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+@@ -2852,7 +2863,7 @@
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+@@ -2861,7 +2872,7 @@
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
++ $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -2872,10 +2883,21 @@
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ case "$host_os" in
+ rhapsody* | darwin1.[[012]])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress'
+ ;;
+ *) # Darwin 1.3 on
+- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[012])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup'
++ ;;
++ esac
++ fi
+ ;;
+ esac
+ lt_int_apple_cc_single_mod=no
+@@ -2884,19 +2906,19 @@
+ lt_int_apple_cc_single_mod=yes
+ fi
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
+ else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring'
+ fi
+- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
+
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+@@ -2931,7 +2953,7 @@
+ freebsd-elf*)
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+- freebsd*)
++ freebsd* | kfreebsd*-gnu)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+@@ -2953,7 +2975,7 @@
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+@@ -2966,7 +2988,7 @@
+ ;;
+ *)
+ if test "$GXX" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+@@ -3023,7 +3045,7 @@
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+ ;;
+ *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+@@ -3044,7 +3066,7 @@
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+ ;;
+ *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
+ ;;
+ esac
+ fi
+@@ -3059,7 +3081,7 @@
+ case $cc_basename in
+ CC)
+ # SGI C++
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+@@ -3070,9 +3092,9 @@
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+ fi
+ fi
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+@@ -3089,8 +3111,8 @@
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+@@ -3112,16 +3134,16 @@
+ # Intel C++
+ with_gnu_ld=yes
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ cxx)
+ # Compaq C++
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -3178,7 +3200,7 @@
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3195,7 +3217,7 @@
+ ;;
+ cxx)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3213,7 +3235,7 @@
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3238,7 +3260,7 @@
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3254,10 +3276,10 @@
+ ;;
+ cxx)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
++ $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
+ $rm $lib.exp'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -3276,7 +3298,7 @@
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3333,9 +3355,9 @@
+ CC)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++ $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -3369,7 +3391,7 @@
+ ;;
+ gcx)
+ # Green Hills C++ Compiler
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+@@ -3379,9 +3401,9 @@
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | grep -v '^2\.7' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+@@ -3390,9 +3412,9 @@
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+@@ -3920,7 +3942,7 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+@@ -4577,7 +4599,7 @@
+ ;;
+ esac
+ ;;
+- freebsd*)
++ freebsd* | kfreebsd*-gnu)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+@@ -5062,7 +5084,7 @@
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -5078,7 +5100,7 @@
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+@@ -5087,7 +5109,7 @@
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
++ $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -5098,8 +5120,8 @@
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+@@ -5117,8 +5139,8 @@
+
+ EOF
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -5133,8 +5155,8 @@
+
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -5248,13 +5270,13 @@
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+@@ -5269,7 +5291,7 @@
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds it's shared libraries.
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+@@ -5298,7 +5320,7 @@
+ # Tell ltmain to make .dll files, not .so files.
+ shrext=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+@@ -5312,10 +5334,21 @@
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ case "$host_os" in
+ rhapsody* | darwin1.[[012]])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress'
+ ;;
+ *) # Darwin 1.3 on
+- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[012])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup'
++ ;;
++ esac
++ fi
+ ;;
+ esac
+ lt_int_apple_cc_single_mod=no
+@@ -5324,18 +5357,18 @@
+ lt_int_apple_cc_single_mod=yes
+ fi
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
+ else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring'
+ fi
+- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+@@ -5376,8 +5409,8 @@
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+- freebsd*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ freebsd* | kfreebsd*-gnu)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $compiler_flags $libobjs $deplibs'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -5385,7 +5418,7 @@
+
+ hpux9*)
+ if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -5403,10 +5436,10 @@
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
+ ;;
+ *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs'
+ ;;
+ esac
+ else
+@@ -5453,7 +5486,7 @@
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+@@ -5486,7 +5519,7 @@
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+@@ -5496,7 +5529,7 @@
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+@@ -5507,14 +5540,14 @@
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def'
+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+@@ -5526,7 +5559,7 @@
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+@@ -5551,9 +5584,9 @@
+ solaris*)
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+ if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+@@ -5573,7 +5606,7 @@
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -5633,9 +5666,9 @@
+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
+ if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
+ else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
+ fi
+ runpath_var='LD_RUN_PATH'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+--- a/admin/ltmain.sh
++++ b/admin/ltmain.sh
+@@ -17,7 +17,7 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+@@ -1149,6 +1149,19 @@
+ finalize_command="$finalize_command $qarg"
+ continue
+ ;;
++ framework)
++ case $host in
++ *-*-darwin*)
++ case "$deplibs " in
++ *" $qarg.ltframework "*) ;;
++ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
++ ;;
++ esac
++ ;;
++ esac
++ prev=
++ continue
++ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+@@ -1263,9 +1276,6 @@
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+- *-*-freebsd*-gnu*)
+- # prevent being parsed by the freebsd regexp below
+- ;;
+ *-*-mingw* | *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+@@ -1276,14 +1286,11 @@
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+- deplibs="$deplibs -framework System"
++ deplibs="$deplibs System.ltframework"
+ continue
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+- *-*-freebsd*-gnu*)
+- # prevent being parsed by the freebsd regexp below
+- ;;
+ *-*-openbsd*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+@@ -1466,6 +1473,11 @@
+ continue
+ ;;
+
++ -framework)
++ prev=framework
++ continue
++ ;;
++
+ # Some other compiler flag.
+ -* | +*)
+ # Unknown arguments in both finalize_command and compile_command need
+@@ -1883,6 +1895,18 @@
+ fi
+ fi
+ ;; # -l
++ *.ltframework)
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ deplibs="$deplib $deplibs"
++ if test "$linkmode" = lib ; then
++ newdependency_libs="$deplib $newdependency_libs"
++ fi
++ fi
++ continue
++ ;;
+ -L*)
+ case $linkmode in
+ lib)
+@@ -2011,6 +2035,13 @@
+ *) . ./$lib ;;
+ esac
+
++ case $host in
++ *-*-darwin*)
++ # Convert "-framework foo" to "foo.ltframework" in dependency_libs
++ test -n "$dependency_libs" && dependency_libs=`$echo "X$dependency_libs" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
++ ;;
++ esac
++
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+@@ -2617,6 +2648,15 @@
+ *) continue ;;
+ esac
+ ;;
++
++ *.ltframework)
++ case $host in
++ *-*-darwin*)
++ depdepl="$deplib"
++ ;;
++ esac
++ ;;
++
+ *) continue ;;
+ esac
+ case " $deplibs " in
+@@ -3058,7 +3098,7 @@
+ tempremovelist=`$echo "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+- *.$objext)
++ *.$objext | *$exeext)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ removelist="$removelist $p"
+@@ -3130,17 +3170,11 @@
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+- deplibs="$deplibs -framework System"
++ deplibs="$deplibs System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+- *-*-freebsd*-gnu*)
+- # Prevent $arg from being parsed by the freebsd regexp below.
+- if test "$build_libtool_need_lc" = "yes"; then
+- deplibs="$deplibs -lc"
+- fi
+- ;;
+ *-*-openbsd* | *-*-freebsd*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+@@ -3429,7 +3463,7 @@
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+@@ -3475,6 +3509,13 @@
+ fi
+ fi
+ fi
++ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
++ case $host in
++ *-*-darwin*)
++ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++ dependency_libs=`$echo "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++ ;;
++ esac
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+@@ -4057,18 +4098,21 @@
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
++ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+- *darwin*)
++ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ if test "$tagname" = CXX ; then
+ compile_command="$compile_command ${wl}-bind_at_load"
+ finalize_command="$finalize_command ${wl}-bind_at_load"
+ fi
++ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
++ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
++ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+@@ -4529,8 +4573,8 @@
+ *) exeext= ;;
+ esac
+ case $host in
+- *cygwin* | *mingw* )
+- cwrappersource=`$echo ${objdir}/lt-${output}.c`
++ *mingw* )
++ cwrappersource=`$echo ${output_objdir}/lt-${outputname}.c`
+ cwrapper=`$echo ${output}.exe`
+ $rm $cwrappersource $cwrapper
+ trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
+@@ -4896,18 +4940,13 @@
+ "
+ ;;
+
+- *-*-freebsd* )
++ *)
+ # Need to set LD_LIBRARY_PATH, to the value already
+ # computed within libtool.
+ $echo >> $output "\
+ LD_LIBRARY_PATH=\"$rpath\" exec \$progdir/\$program \${1+\"\$@\"}
+ "
+ ;;
+- *)
+- $echo >> $output "\
+- exec \$progdir/\$program \${1+\"\$@\"}
+-"
+- ;;
+ esac
+ $echo >> $output "\
+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+--- a/admin/Makefile.common
++++ b/admin/Makefile.common
+@@ -6,7 +6,7 @@
+
+ SHELL=/bin/sh
+
+-cvs dist cvs-clean configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4:
++cvs dist configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages:
+ @admindir=$(admindir); \
+ if test "x$$admindir" = x; then \
+ admindir=.; until test -f $$admindir/admin/cvs.sh; do \
+@@ -30,6 +30,8 @@
+ configure.in: configure.files subdirs
+ configure.files: subdirs
+
++svn: cvs
++
+ .SILENT:
+
+-.PHONY: cvs dist cvs-clean package-merge package-messages
++.PHONY: svn cvs dist package-merge package-messages
+--- a/admin/missing
++++ b/admin/missing
+@@ -1,6 +1,10 @@
+ #! /bin/sh
+ # Common stub for a few missing GNU programs while installing.
+-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
++
++scriptversion=2004-09-07.08
++
++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
++# Free Software Foundation, Inc.
+ # Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+
+ # This program is free software; you can redistribute it and/or modify
+@@ -38,18 +42,24 @@
+ configure_ac=configure.in
+ fi
+
++msg="missing on your system"
++
+ case "$1" in
+ --run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
++ # Exit code 63 means version mismatch. This often happens
++ # when the user try to use an ancient version of a tool on
++ # a file that requires a minimum version. In this case we
++ # we should proceed has if the program had been absent, or
++ # if --run hadn't been passed.
++ if test $? = 63; then
++ run=:
++ msg="probably too old"
++ fi
+ ;;
+-esac
+-
+-# If it does not exist, or fails to run (possibly an outdated version),
+-# try to emulate it.
+-case "$1" in
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+@@ -74,11 +84,15 @@
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
++ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
++
++Send bug reports to <bug-automake at gnu.org>."
++ exit 0
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+- echo "missing 0.4 - GNU automake"
++ echo "missing $scriptversion (GNU Automake)"
++ exit 0
+ ;;
+
+ -*)
+@@ -87,14 +101,44 @@
+ exit 1
+ ;;
+
+- aclocal*)
++esac
++
++# Now exit if we have it, but it failed. Also exit now if we
++# don't have it and --version was passed (most likely to detect
++# the program).
++case "$1" in
++ lex|yacc)
++ # Not GNU programs, they don't have --version.
++ ;;
++
++ tar)
++ if test -n "$run"; then
++ echo 1>&2 "ERROR: \`tar' requires --run"
++ exit 1
++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++ exit 1
++ fi
++ ;;
++
++ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++ # Could not run --version or --help. This is probably someone
++ # running `$TOOL --version' or `$TOOL --help' to check whether
++ # $TOOL exists and not knowing $TOOL uses missing.
++ exit 1
+ fi
++ ;;
++esac
+
++# If it does not exist, or fails to run (possibly an outdated version),
++# try to emulate it.
++case "$1" in
++ aclocal*)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+@@ -102,13 +146,8 @@
+ ;;
+
+ autoconf)
+- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+- # We have it, but it failed.
+- exit 1
+- fi
+-
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+@@ -116,13 +155,8 @@
+ ;;
+
+ autoheader)
+- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+- # We have it, but it failed.
+- exit 1
+- fi
+-
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+@@ -140,13 +174,8 @@
+ ;;
+
+ automake*)
+- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+- # We have it, but it failed.
+- exit 1
+- fi
+-
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+@@ -156,16 +185,11 @@
+ ;;
+
+ autom4te)
+- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+- # We have it, but it failed.
+- exit 1
+- fi
+-
+ echo 1>&2 "\
+-WARNING: \`$1' is needed, and you do not seem to have it handy on your
+- system. You might have modified some files without having the
++WARNING: \`$1' is needed, but is $msg.
++ You might have modified some files without having the
+ proper tools for further handling them.
+- You can get \`$1Help2man' as part of \`Autoconf' from any GNU
++ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+@@ -185,7 +209,7 @@
+
+ bison|yacc)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+@@ -215,7 +239,7 @@
+
+ lex|flex)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+@@ -237,13 +261,8 @@
+ ;;
+
+ help2man)
+- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+- # We have it, but it failed.
+- exit 1
+- fi
+-
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+@@ -262,13 +281,8 @@
+ ;;
+
+ makeinfo)
+- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+- # We have makeinfo, but it failed.
+- exit 1
+- fi
+-
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+@@ -284,10 +298,6 @@
+
+ tar)
+ shift
+- if test -n "$run"; then
+- echo 1>&2 "ERROR: \`tar' requires --run"
+- exit 1
+- fi
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+@@ -323,10 +333,10 @@
+
+ *)
+ echo 1>&2 "\
+-WARNING: \`$1' is needed, and you do not seem to have it handy on your
+- system. You might have modified some files without having the
++WARNING: \`$1' is needed, and is $msg.
++ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+- it often tells you about the needed prerequirements for installing
++ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+@@ -334,3 +344,10 @@
+ esac
+
+ exit 0
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+--- a/admin/mkinstalldirs
++++ b/admin/mkinstalldirs
+@@ -1,21 +1,33 @@
+ #! /bin/sh
+ # mkinstalldirs --- make directory hierarchy
+-# Author: Noah Friedman <friedman at prep.ai.mit.edu>
++
++scriptversion=2005-06-29.22
++
++# Original author: Noah Friedman <friedman at prep.ai.mit.edu>
+ # Created: 1993-05-16
+-# Public domain
++# Public domain.
++#
++# This file is maintained in Automake, please report
++# bugs to <bug-automake at gnu.org> or send patches to
++# <automake-patches at gnu.org>.
+
+ errstatus=0
+-dirmode=""
++dirmode=
+
+ usage="\
+-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
++Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
++
++Create each directory DIR (with mode MODE, if specified), including all
++leading file name components.
++
++Report bugs to <bug-automake at gnu.org>."
+
+ # process command line arguments
+ while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+- echo "$usage" 1>&2
+- exit 0
++ echo "$usage"
++ exit $?
+ ;;
+ -m) # -m PERM arg
+ shift
+@@ -23,6 +35,10 @@
+ dirmode=$1
+ shift
+ ;;
++ --version)
++ echo "$0 $scriptversion"
++ exit $?
++ ;;
+ --) # stop option processing
+ shift
+ break
+@@ -50,30 +66,58 @@
+ 0) exit 0 ;;
+ esac
+
++# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
++# mkdir -p a/c at the same time, both will detect that a is missing,
++# one will create a, then the other will try to create a and die with
++# a "File exists" error. This is a problem when calling mkinstalldirs
++# from a parallel make. We use --version in the probe to restrict
++# ourselves to GNU mkdir, which is thread-safe.
+ case $dirmode in
+ '')
+- if mkdir -p -- . 2>/dev/null; then
++ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
++ else
++ # On NextStep and OpenStep, the `mkdir' command does not
++ # recognize any option. It will interpret all options as
++ # directories to create, and then abort because `.' already
++ # exists.
++ test -d ./-p && rmdir ./-p
++ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+- if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
++ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
++ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
++ else
++ # Clean up after NextStep and OpenStep mkdir.
++ for d in ./-m ./-p ./--version "./$dirmode";
++ do
++ test -d $d && rmdir $d
++ done
+ fi
+ ;;
+ esac
+
+ for file
+ do
+- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
++ case $file in
++ /*) pathcomp=/ ;;
++ *) pathcomp= ;;
++ esac
++ oIFS=$IFS
++ IFS=/
++ set fnord $file
+ shift
++ IFS=$oIFS
+
+- pathcomp=
+ for d
+ do
+- pathcomp="$pathcomp$d"
++ test "x$d" = x && continue
++
++ pathcomp=$pathcomp$d
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+@@ -84,21 +128,21 @@
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+- errstatus=$lasterr
++ errstatus=$lasterr
+ else
+- if test ! -z "$dirmode"; then
++ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+- lasterr=""
+- chmod "$dirmode" "$pathcomp" || lasterr=$?
++ lasterr=
++ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+- if test ! -z "$lasterr"; then
+- errstatus=$lasterr
+- fi
+- fi
++ if test ! -z "$lasterr"; then
++ errstatus=$lasterr
++ fi
++ fi
+ fi
+ fi
+
+- pathcomp="$pathcomp/"
++ pathcomp=$pathcomp/
+ done
+ done
+
+@@ -107,5 +151,8 @@
+ # Local Variables:
+ # mode: shell-script
+ # sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
+ # End:
+-# mkinstalldirs ends here
+--- /dev/null
++++ b/admin/nmcheck
+@@ -0,0 +1,371 @@
++#!/usr/bin/perl -w
++
++# Check namespace cleanness of a library.
++# Allowed symbols are passed as arguments.
++# They may have trailing * = wildcard.
++# Wildcards may be also specified as *::* (e.g. K*::* for all KDE classes)
++# Symbols are listed as full function unmangled names without arguments,
++# e.g. 'foo bar* nspace::*' allows foo(), foo(int), bar(), barbar()
++# and all symbols in namespace/class nspace.
++# If an argument has comma in it, it's a filename of a file containing
++# allowed symbols, one per line.
++
++
++$thisProg = "$0"; # This programs name
++
++$library = "";
++$allowed_symbols = "";
++$debug = 0;
++$allowed_weak = "";
++$weak_specified = 0;
++
++while( defined( $ARGV[ 0 ] ))
++{
++ $_ = shift;
++ if( /^--verbose$|^-v$/ )
++ {
++ $debug = 1;
++ }
++ elsif( /^--help$|^-h$/ )
++ {
++ print STDOUT "Usage $thisProg [OPTION] ... library [allowed symbols] ...\n",
++ "\n",
++ "Check if the given library has only allowed public symbols.\n",
++ "\n",
++ " --allowweak=[symbol] allow only these weak symbols\n",
++ " -v, --verbose verbosely list files processed\n",
++ " -h, --help print this help, then exit\n";
++ exit 0;
++ }
++ elsif( /^--allowweak=(.*)$/ )
++ {
++ $allowed_weak .= " " . $1;
++ $weak_specified = 1;
++ }
++ elsif( /^--allowweak$/ ) # simply list all weak
++ {
++ $allowed_weak .= " ";
++ $weak_specified = 1;
++ }
++ elsif( /^--*/ )
++ {
++ die "Invalid argument!\n";
++ }
++ else
++ {
++ if( ! $library )
++ {
++ $library = $_;
++ }
++ else
++ {
++ $allowed_symbols .= " " . $_;
++ }
++ }
++}
++
++if( ! $weak_specified )
++{
++ $allowed_weak = "*";
++ # allow all weak symbols by default
++ # instances of templates and similar stuff - unfortunately includes also things from other libraries,
++ # so it cannot be on by default
++}
++
++print STDERR "library:" . $library . "\n" if $debug;
++print STDERR "allowed_symbols:" . $allowed_symbols . "\n" if $debug;
++print STDERR "allowed_weak:" . $allowed_weak . "\n" if $debug;
++
++$default_symbols = "_fini _init"; # system symbols
++# on my system, every .so has :
++# A _DYNAMIC
++# A _GLOBAL_OFFSET_TABLE_
++# A __bss_start
++# A _edata
++# A _end
++# T _fini
++# T _init
++# no need to list A symbols in $default_symbols
++
++print STDERR "default_symbols: " . $default_symbols . "\n" if $debug;
++
++print STDOUT "Namespace cleanness check for " . $library . " :\n";
++
++$lib_file = "";
++if( $library =~ /\.la$/ )
++{
++ # get the real library file from .la
++ open( FILEIN, $library ) || die "Couldn't open $! !\n";
++ while( $line = <FILEIN> )
++ {
++ if( $line =~ /library_names=\'([^ ]*).*/o )
++ {
++ $lib_file = $1;
++ }
++ }
++ close( FILEIN );
++ if( ! $lib_file )
++ {
++ print STDERR "Library file not found in .la file!\n";
++ exit 1;
++ }
++ my $libpath = $library;
++ $libpath =~ s%[^/]*$%%;
++ if( -e $libpath . ".libs/" . $lib_file )
++ {
++ $lib_file = $libpath . ".libs/" . $lib_file;
++ }
++ else
++ {
++ $lib_file = $libpath . $lib_file;
++ }
++}
++else
++{
++ $lib_file = $library;
++}
++
++print STDERR "libfile: ". $lib_file . "\n" if $debug;
++
++$allowed_symbols .= " " . $default_symbols;
++
++sub process_symbols($\@\%\@);
++
++ at wildcards = ();
++%exacts = ();
++ at regwildcards = ();
++process_symbols( $allowed_symbols, @wildcards, %exacts, @regwildcards );
++ at weak_wildcards = ();
++%weak_exacts = ();
++ at weak_regwildcards = ();
++process_symbols( $allowed_weak, @weak_wildcards, %weak_exacts, @weak_regwildcards );
++
++# grep is for stripping not exported symbols, which don't have address (=first column)
++$nm_command = "nm -BDCg " . $lib_file . " | grep -v '^ ' |";
++
++# TODO how portable is this nmcheck stuff?
++
++print STDERR "nm command:" . $nm_command . "\n" if $debug;
++
++open( FILEIN, $nm_command ) || die "nm command failed\n";
++
++my $exit_code = 0;
++
++while( $line = <FILEIN> )
++{
++ my $type;
++ my $symbol;
++ if( $line =~ /^[^ ]* (.) (.*)$/o )
++ {
++ $type = $1;
++ $symbol = $2;
++ }
++ else
++ {
++ die "Invalid line: " . $line . "\n";
++ }
++
++ print STDERR "Type: " . $type . " , symbol: " . $symbol . "\n" if $debug;
++ if( $type eq "A" )
++ { # these should be system symbols, so ignore them
++ next;
++ }
++
++ my $orig_symbol = $symbol;
++
++ if( $symbol =~ /\(anonymous namespace\)/o )
++ { # TODO tell to prefer named namespaces? (shorter symbols)
++ next;
++ }
++
++ # strip prefixes
++ # the :: appending is to make "CLASS::*" work also for "vtable for CLASS"
++ $symbol =~ s/^typeinfo for (.*)$/$1::/o;
++ $symbol =~ s/^typeinfo fn for (.*)$/$1::/o;
++ $symbol =~ s/^typeinfo name for (.*)$/$1::/o;
++ $symbol =~ s/^vtable for (.*)$/$1::/o;
++ $symbol =~ s/^guard variable for (.*)$/$1::/o;
++ $symbol =~ s/^reference temporary for (.*)$/$1::/o;
++ $symbol =~ s/^VTT for (.*)$/$1::/o;
++ $symbol =~ s/^virtual thunk \[[^\]]*\] to (.*)$/$1::/o;
++ $symbol =~ s/^non-virtual thunk \[[^\]]*\] to (.*)$/$1::/o;
++ $symbol =~ s/^covariant return thunk \[[^\]]*\] to (.*)$/$1::/o;
++ $symbol =~ s/^construction vtable thunk for (.*)$/$1::/o;
++ $symbol =~ s/^construction vtable for .*-in-(.*) [0-9]*$/$1::/o;
++
++ # templates seem to have also return types mangled in their name, and nm prints it too
++ # they have also template arguments in the symbol
++ # get rid of both of those
++ while( $symbol =~ /<.*>/o )
++ {
++ $symbol =~ s/<[^<>]*>//o; # strip innermost <>
++ }
++ if( $symbol !~ /operator\(\)/o )
++ {
++ $symbol =~ s/ ?\(.*\).*$//o; # strip () and all after it
++ }
++ else
++ {
++ $symbol =~ s/(^|:| )operator\(\) ?\(.*\).*$//o; # strip () and all after it
++ }
++ $symbol =~ s/\[.*\] *$//o; # strip [in-charge] etc.
++ if( $symbol =~ /(^|:| )operator /o )
++ {
++ $symbol =~ s/.* ([^\s]*)operator /$1/o; # strip everything before 'X::operator blah'
++ }
++ else
++ {
++ $symbol =~ s/.* ([^\s]+) *$/$1/o; # get last word (strip return type)
++ }
++
++ # print STDERR "Processed symbol: " . $symbol . "\n" if $debug;
++
++ my $found = 0;
++ if( $exacts{ $symbol } )
++ {
++ $found = 1;
++ }
++ if( ! $found )
++ {
++ for my $wild ( @wildcards )
++ {
++ if( index( $symbol, $wild ) == 0 )
++ {
++ $found = 1;
++ last;
++ }
++ }
++ }
++ if( ! $found )
++ {
++ for my $wild ( @regwildcards )
++ {
++ if( $symbol =~ /^$wild$/ )
++ {
++ $found = 1;
++ last;
++ }
++ }
++ }
++ if( ( ! $found ) && ( $type eq "W" || $type eq "V" ))
++ {
++ if( $weak_exacts{ $symbol } )
++ {
++ $found = 1;
++ }
++ if( ! $found )
++ {
++ for my $wild ( @weak_wildcards )
++ {
++ if( index( $symbol, $wild ) == 0 )
++ {
++ $found = 1;
++ last;
++ }
++ }
++ }
++ if( ! $found )
++ {
++ for my $wild ( @weak_regwildcards )
++ {
++ if( $symbol =~ /^$wild$/ )
++ {
++ $found = 1;
++ last;
++ }
++ }
++ }
++ }
++
++ if( ! $found )
++ {
++ print STDERR "Public symbol " . $orig_symbol . " is not allowed!\n";
++ $exit_code = 1;
++ }
++}
++
++close( FILEIN );
++
++print STDOUT $exit_code == 0 ? "OK\n" : "FAILED\n";
++
++exit $exit_code;
++
++sub process_symbols($\@\%\@)
++{
++ my $allowed_symbols = $_[ 0 ];
++ my $wildcards_ref = $_[ 1 ];
++ my $exacts_ref = $_[ 2 ];
++ my $regwildcards_ref = $_[ 3 ];
++
++ $allowed_symbols =~ s/^ *//o; # strip whitespace
++ $allowed_symbols =~ s/ *$//o;
++
++ if( $allowed_symbols eq "NONE" )
++ {
++ $allowed_symbols = "";
++ }
++
++ my @symbols1 = split( ' ', $allowed_symbols );
++ my $i = 0;
++ my @symbols2 = ();
++ while( defined( $symbols1[ $i ] ))
++ {
++ my $symbol = $symbols1[ $i ];
++ if( $symbol =~ /\./ ) # dot in name -> file
++ {
++ open( SYMIN, $symbol ) || die ( "Cannot open file " . $symbol . "!" );
++ while( $line = <SYMIN> )
++ {
++ $line =~ s/^\s*//o; # strip whitespace
++ $line =~ s/\s*$//o;
++ if( $line !~ /^$/o # empty line
++ && $line !~ /^\s*#/ ) # comment line starting with #
++ {
++ $symbols2[ $#symbols2 + 1 ] = $line;
++ }
++ }
++ close( SYMIN );
++ }
++ else
++ {
++ $symbols2[ $#symbols2 + 1 ] = $symbol;
++ }
++ $i++;
++ }
++ $i = 0;
++ while( defined( $symbols2[ $i ] ))
++ {
++ my $symbol = $symbols2[ $i ];
++ if( $symbol =~ /__/
++ || $symbol =~ /^_[A-Z]/ )
++ { # ISO C++ 2.10.2
++ die "Symbols containing a double underscore or beginning with an underscore and an upper-case letter are reserved!\n";
++ }
++ elsif( $symbol eq "main"
++ || $symbol eq "main*" )
++ {
++ die "Symbol main is not allowed!\n";
++ }
++ if( $symbol =~ /^([^\*]*)\*$/o # trailing * without any * before it
++ && $symbol !~ /operator\*$/o )
++ {
++ print STDERR "wildcard:" . $symbol . "\n" if $debug;
++ $wildcards_ref->[ $#{$wildcards_ref} + 1 ] = $1;
++ }
++ elsif( $symbol =~ /\*$/o
++ && ( $symbol =~ /\*::/o || $symbol =~ /::\*/o )
++ && $symbol !~ /^\*/o
++ && $symbol !~ /operator\*$/o )
++ {
++ print STDERR "regwildcard:" . $symbol . "\n" if $debug;
++ $symbol =~ s/\*/\.\*/go; # change * to .* (regexp)
++ $regwildcards_ref->[ $#{$regwildcards_ref} + 1 ] = $symbol;
++ }
++ else
++ {
++ print STDERR "exact:" . $symbol . "\n" if $debug;
++ $exacts_ref->{ $symbol } = 1;
++ }
++ $i++;
++ }
++}
+--- /dev/null
++++ b/admin/oldinclude.m4.in
+@@ -0,0 +1,192 @@
++### -*- autoconf -*-
++
++dnl This file is part of the KDE libraries/packages
++dnl Copyright (C) 1997 Janos Farkas (chexum at shadow.banki.hu)
++dnl (C) 1997,98,99 Stephan Kulow (coolo at kde.org)
++
++dnl This file is free software; you can redistribute it and/or
++dnl modify it under the terms of the GNU Library General Public
++dnl License as published by the Free Software Foundation; either
++dnl version 2 of the License, or (at your option) any later version.
++
++dnl This library is distributed in the hope that it will be useful,
++dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
++dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++dnl Library General Public License for more details.
++
++dnl You should have received a copy of the GNU Library General Public License
++dnl along with this library; see the file COPYING.LIB. If not, write to
++dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++dnl Boston, MA 02110-1301, USA.
++
++AC_DEFUN([KDE_CHECK_MICO],
++[
++AC_REQUIRE([KDE_CHECK_LIBDL])
++AC_REQUIRE([KDE_MISC_TESTS])
++AC_MSG_CHECKING(for MICO)
++
++if test -z "$MICODIR"; then
++ kde_micodir=/usr/local
++ else
++ kde_micodir="$MICODIR"
++fi
++
++AC_ARG_WITH(micodir,
++ [ --with-micodir=micodir where mico is installed ],
++ kde_micodir=$withval,
++ kde_micodir=$kde_micodir
++)
++
++AC_CACHE_VAL(kde_cv_mico_incdir,
++[
++ mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
++AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
++
++])
++kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
++
++if test ! -r $kde_micodir/include/CORBA.h; then
++ AC_MSG_ERROR([No CORBA.h found, specify another micodir])
++fi
++
++AC_MSG_RESULT($kde_micodir)
++
++MICO_INCLUDES=-I$kde_micodir/include
++AC_SUBST(MICO_INCLUDES)
++MICO_LDFLAGS=-L$kde_micodir/lib
++AC_SUBST(MICO_LDFLAGS)
++micodir=$kde_micodir
++AC_SUBST(micodir)
++
++AC_MSG_CHECKING([for MICO version])
++AC_CACHE_VAL(kde_cv_mico_version,
++[
++AC_LANG_C
++cat >conftest.$ac_ext <<EOF
++#include <stdio.h>
++#include <mico/version.h>
++int main() {
++
++ printf("MICO_VERSION=%s\n",MICO_VERSION);
++ return (0);
++}
++EOF
++ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
++if AC_TRY_EVAL(ac_compile); then
++ if eval `./conftest 2>&5`; then
++ kde_cv_mico_version=$MICO_VERSION
++ else
++ AC_MSG_ERROR([your system is not able to execute a small application to
++ find MICO version! Check $kde_micodir/include/mico/version.h])
++ fi
++else
++ AC_MSG_ERROR([your system is not able to compile a small application to
++ find MICO version! Check $kde_micodir/include/mico/version.h])
++fi
++])
++
++dnl installed MICO version
++mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
++mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
++mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
++
++if test "x$1" = "x"; then
++ req_version="2.3.0"
++else
++ req_version=$1
++fi
++
++dnl required MICO version
++req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
++req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
++req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
++
++if test "$mico_v_maj" -lt "$req_v_maj" || \
++ ( test "$mico_v_maj" -eq "$req_v_maj" && \
++ test "$mico_v_mid" -lt "$req_v_mid" ) || \
++ ( test "$mico_v_mid" -eq "$req_v_mid" && \
++ test "$mico_v_min" -lt "$req_v_min" )
++
++then
++ AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
++at least is required. You should upgrade MICO.])
++else
++ AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
++fi
++
++LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
++AC_SUBST(LIBMICO)
++if test -z "$IDL"; then
++ IDL='$(kde_bindir)/cuteidl'
++fi
++AC_SUBST(IDL)
++IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
++AC_SUBST(IDL_DEPENDENCIES)
++
++idldir="\$(includedir)/idl"
++AC_SUBST(idldir)
++
++])
++
++AC_DEFUN([KDE_CHECK_MINI_STL],
++[
++AC_REQUIRE([KDE_CHECK_MICO])
++
++AC_MSG_CHECKING(if we use mico's mini-STL)
++AC_CACHE_VAL(kde_cv_have_mini_stl,
++[
++AC_LANG_SAVE
++AC_LANG_CPLUSPLUS
++kde_save_cxxflags="$CXXFLAGS"
++CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
++AC_TRY_COMPILE(
++[
++#include <mico/config.h>
++],
++[
++#ifdef HAVE_MINI_STL
++#error "nothing"
++#endif
++],
++kde_cv_have_mini_stl=no,
++kde_cv_have_mini_stl=yes)
++CXXFLAGS="$kde_save_cxxflags"
++AC_LANG_RESTORE
++])
++
++if test "x$kde_cv_have_mini_stl" = "xyes"; then
++ AC_MSG_RESULT(yes)
++ $1
++else
++ AC_MSG_RESULT(no)
++ $2
++fi
++])
++
++])
++
++AC_DEFUN([KDE_CHECK_ANSI],
++[
++])
++
++AC_DEFUN([KDE_CHECK_INSURE],
++[
++ AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]],
++ [
++ if test $enableval = "no"; dnl
++ then ac_use_insure="no"
++ else ac_use_insure="yes"
++ fi
++ ], [ac_use_insure="no"])
++
++ AC_MSG_CHECKING(if we will use Insure++ to debug)
++ AC_MSG_RESULT($ac_use_insure)
++ if test "$ac_use_insure" = "yes"; dnl
++ then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
++ fi
++])
++
++AC_DEFUN([KDE_CHECK_NEWLIBS],
++[
++
++])
+--- /dev/null
++++ b/admin/pkg.m4.in
+@@ -0,0 +1,57 @@
++
++dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
++dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
++dnl also defines GSTUFF_PKG_ERRORS on error
++AC_DEFUN([PKG_CHECK_MODULES], [
++ succeeded=no
++
++ if test -z "$PKG_CONFIG"; then
++ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
++ fi
++
++ if test "$PKG_CONFIG" = "no" ; then
++ echo "*** The pkg-config script could not be found. Make sure it is"
++ echo "*** in your path, or set the PKG_CONFIG environment variable"
++ echo "*** to the full path to pkg-config."
++ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
++ else
++ PKG_CONFIG_MIN_VERSION=0.9.0
++ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
++ AC_MSG_CHECKING(for $2)
++
++ if $PKG_CONFIG --exists "$2" ; then
++ AC_MSG_RESULT(yes)
++ succeeded=yes
++
++ AC_MSG_CHECKING($1_CFLAGS)
++ $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
++ AC_MSG_RESULT($$1_CFLAGS)
++
++ AC_MSG_CHECKING($1_LIBS)
++ $1_LIBS=`$PKG_CONFIG --libs "$2"`
++ AC_MSG_RESULT($$1_LIBS)
++ else
++ $1_CFLAGS=""
++ $1_LIBS=""
++ ## If we have a custom action on failure, don't print errors, but
++ ## do set a variable so people can do so.
++ $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
++ ifelse([$4], ,echo $$1_PKG_ERRORS,)
++ fi
++
++ AC_SUBST($1_CFLAGS)
++ AC_SUBST($1_LIBS)
++ else
++ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
++ echo "*** See http://www.freedesktop.org/software/pkgconfig"
++ fi
++ fi
++
++ if test $succeeded = yes; then
++ ifelse([$3], , :, [$3])
++ else
++ ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
++ fi
++])
++
++
+--- a/admin/ylwrap
++++ b/admin/ylwrap
+@@ -1,6 +1,11 @@
+ #! /bin/sh
+ # ylwrap - wrapper for lex/yacc invocations.
+-# Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
++
++scriptversion=2005-05-14.22
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
+ # Written by Tom Tromey <tromey at cygnus.com>.
+ #
+ # This program is free software; you can redistribute it and/or modify
+@@ -15,51 +20,73 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
+
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
+-# Usage:
+-# ylwrap INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
+-# * INPUT is the input file
+-# * OUTPUT is file PROG generates
+-# * DESIRED is file we actually want
+-# * PROGRAM is program to run
+-# * ARGS are passed to PROG
+-# Any number of OUTPUT,DESIRED pairs may be used.
++# This file is maintained in Automake, please report
++# bugs to <bug-automake at gnu.org> or send patches to
++# <automake-patches at gnu.org>.
++
++case "$1" in
++ '')
++ echo "$0: No files given. Try \`$0 --help' for more information." 1>&2
++ exit 1
++ ;;
++ --basedir)
++ basedir=$2
++ shift 2
++ ;;
++ -h|--h*)
++ cat <<\EOF
++Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
++
++Wrapper for lex/yacc invocations, renaming files as desired.
++
++ INPUT is the input file
++ OUTPUT is one file PROG generates
++ DESIRED is the file we actually want instead of OUTPUT
++ PROGRAM is program to run
++ ARGS are passed to PROG
++
++Any number of OUTPUT,DESIRED pairs may be used.
++
++Report bugs to <bug-automake at gnu.org>.
++EOF
++ exit $?
++ ;;
++ -v|--v*)
++ echo "ylwrap $scriptversion"
++ exit $?
++ ;;
++esac
++
+
+ # The input.
+ input="$1"
+ shift
+ case "$input" in
+- [\\/]* | ?:[\\/]*)
++ [\\/]* | ?:[\\/]*)
+ # Absolute path; do nothing.
+ ;;
+- *)
++ *)
+ # Relative path. Make it absolute.
+ input="`pwd`/$input"
+ ;;
+ esac
+
+-# The directory holding the input.
+-input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
+-# Quote $INPUT_DIR so we can use it in a regexp.
+-# FIXME: really we should care about more than `.' and `\'.
+-input_rx=`echo "$input_dir" | sed -e 's,\\\\,\\\\\\\\,g' -e 's,\\.,\\\\.,g'`
+-
+-echo "got $input_rx"
+-
+ pairlist=
+ while test "$#" -ne 0; do
+- if test "$1" = "--"; then
+- shift
+- break
+- fi
+- pairlist="$pairlist $1"
+- shift
++ if test "$1" = "--"; then
++ shift
++ break
++ fi
++ pairlist="$pairlist $1"
++ shift
+ done
+
+ # The program to run.
+@@ -67,8 +94,8 @@
+ shift
+ # Make any relative path in $prog absolute.
+ case "$prog" in
+- [\\/]* | ?:[\\/]*) ;;
+- *[\\/]*) prog="`pwd`/$prog" ;;
++ [\\/]* | ?:[\\/]*) ;;
++ *[\\/]*) prog="`pwd`/$prog" ;;
+ esac
+
+ # FIXME: add hostname here for parallel makes that run commands on
+@@ -79,65 +106,118 @@
+
+ cd $dirname
+
+-$prog ${1+"$@"} "$input"
+-status=$?
++case $# in
++ 0) $prog "$input" ;;
++ *) $prog "$@" "$input" ;;
++esac
++ret=$?
+
+-if test $status -eq 0; then
+- set X $pairlist
+- shift
+- first=yes
+- # Since DOS filename conventions don't allow two dots,
+- # the DOS version of Bison writes out y_tab.c instead of y.tab.c
+- # and y_tab.h instead of y.tab.h. Test to see if this is the case.
+- y_tab_nodot="no"
+- if test -f y_tab.c || test -f y_tab.h; then
+- y_tab_nodot="yes"
+- fi
+-
+- while test "$#" -ne 0; do
+- from="$1"
+- # Handle y_tab.c and y_tab.h output by DOS
+- if test $y_tab_nodot = "yes"; then
+- if test $from = "y.tab.c"; then
+- from="y_tab.c"
+- else
+- if test $from = "y.tab.h"; then
+- from="y_tab.h"
+- fi
+- fi
+- fi
+- if test -f "$from"; then
+- # If $2 is an absolute path name, then just use that,
+- # otherwise prepend `../'.
+- case "$2" in
+- [\\/]* | ?:[\\/]*) target="$2";;
+- *) target="../$2";;
+- esac
+-
+- # Edit out `#line' or `#' directives. We don't want the
+- # resulting debug information to point at an absolute srcdir;
+- # it is better for it to just mention the .y file with no
+- # path.
+- sed -e "/^#/ s,$input_rx,," "$from" > "$target" || status=$?
++if test $ret -eq 0; then
++ set X $pairlist
++ shift
++ first=yes
++ # Since DOS filename conventions don't allow two dots,
++ # the DOS version of Bison writes out y_tab.c instead of y.tab.c
++ # and y_tab.h instead of y.tab.h. Test to see if this is the case.
++ y_tab_nodot="no"
++ if test -f y_tab.c || test -f y_tab.h; then
++ y_tab_nodot="yes"
++ fi
++
++ # The directory holding the input.
++ input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
++ # Quote $INPUT_DIR so we can use it in a regexp.
++ # FIXME: really we should care about more than `.' and `\'.
++ input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
++
++ while test "$#" -ne 0; do
++ from="$1"
++ # Handle y_tab.c and y_tab.h output by DOS
++ if test $y_tab_nodot = "yes"; then
++ if test $from = "y.tab.c"; then
++ from="y_tab.c"
+ else
+- # A missing file is only an error for the first file. This
+- # is a blatant hack to let us support using "yacc -d". If -d
+- # is not specified, we don't want an error when the header
+- # file is "missing".
+- if test $first = yes; then
+- status=1
+- fi
++ if test $from = "y.tab.h"; then
++ from="y_tab.h"
++ fi
+ fi
+- shift
+- shift
+- first=no
+- done
++ fi
++ if test -f "$from"; then
++ # If $2 is an absolute path name, then just use that,
++ # otherwise prepend `../'.
++ case "$2" in
++ [\\/]* | ?:[\\/]*) target="$2";;
++ *) target="../$2";;
++ esac
++
++ # We do not want to overwrite a header file if it hasn't
++ # changed. This avoid useless recompilations. However the
++ # parser itself (the first file) should always be updated,
++ # because it is the destination of the .y.c rule in the
++ # Makefile. Divert the output of all other files to a temporary
++ # file so we can compare them to existing versions.
++ if test $first = no; then
++ realtarget="$target"
++ target="tmp-`echo $target | sed s/.*[\\/]//g`"
++ fi
++ # Edit out `#line' or `#' directives.
++ #
++ # We don't want the resulting debug information to point at
++ # an absolute srcdir; it is better for it to just mention the
++ # .y file with no path.
++ #
++ # We want to use the real output file name, not yy.lex.c for
++ # instance.
++ #
++ # We want the include guards to be adjusted too.
++ FROM=`echo "$from" | sed \
++ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
++ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
++ TARGET=`echo "$2" | sed \
++ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
++ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
++
++ sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
++ -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
++
++ # Check whether header files must be updated.
++ if test $first = no; then
++ if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
++ echo "$2" is unchanged
++ rm -f "$target"
++ else
++ echo updating "$2"
++ mv -f "$target" "$realtarget"
++ fi
++ fi
++ else
++ # A missing file is only an error for the first file. This
++ # is a blatant hack to let us support using "yacc -d". If -d
++ # is not specified, we don't want an error when the header
++ # file is "missing".
++ if test $first = yes; then
++ ret=1
++ fi
++ fi
++ shift
++ shift
++ first=no
++ done
+ else
+- status=$?
++ ret=$?
+ fi
+
+ # Remove the directory.
+ cd ..
+ rm -rf $dirname
+
+-exit $status
++exit $ret
++
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
Added: kde-extras/kmymoney2/trunk/debian/patches/01_libtool.m4.in_update.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/01_libtool.m4.in_update.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/01_libtool.m4.in_update.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,322 @@
+--- a/admin/libtool.m4.in
++++ b/admin/libtool.m4.in
+@@ -5889,3 +5889,319 @@
+ SED=$lt_cv_path_SED
+ AC_MSG_RESULT([$SED])
+ ])
++dnl
++dnl AM_PATH_CPPUNIT(MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
++dnl
++AC_DEFUN([AM_PATH_CPPUNIT],
++[
++
++AC_ARG_WITH(cppunit-prefix,[ --with-cppunit-prefix=PFX Prefix where CppUnit is installed (optional)],
++ cppunit_config_prefix="$withval", cppunit_config_prefix="")
++AC_ARG_WITH(cppunit-exec-prefix,[ --with-cppunit-exec-prefix=PFX Exec prefix where CppUnit is installed (optional)],
++ cppunit_config_exec_prefix="$withval", cppunit_config_exec_prefix="")
++AC_MSG_CHECKING(if CPPUNIT tests should be available (default=yes))
++AC_ARG_ENABLE(cppunit,
++ [ --disable-cppunit Do not try to build with CPPUNIT tests],,
++ enable_cppunit=yes)
++AC_MSG_RESULT($enable_cppunit)
++
++if test "x$enable_cppunit" = "xyes"; then
++
++ AC_MSG_CHECKING(if CPPUNIT tests requiring an online connection should be build)
++ AC_ARG_ENABLE(online_tests,
++ [ --enable-online-tests Include online tests with CPPUNIT tests],,
++ enable_online_tests=no)
++ AC_MSG_RESULT($enable_online_tests)
++fi
++
++ if test x$cppunit_config_exec_prefix != x ; then
++ cppunit_config_args="$cppunit_config_args --exec-prefix=$cppunit_config_exec_prefix"
++ if test x${CPPUNIT_CONFIG+set} != xset ; then
++ CPPUNIT_CONFIG=$cppunit_config_exec_prefix/bin/cppunit-config
++ fi
++ fi
++ if test x$cppunit_config_prefix != x ; then
++ cppunit_config_args="$cppunit_config_args --prefix=$cppunit_config_prefix"
++ if test x${CPPUNIT_CONFIG+set} != xset ; then
++ CPPUNIT_CONFIG=$cppunit_config_prefix/bin/cppunit-config
++ fi
++ fi
++
++ AC_PATH_PROG(CPPUNIT_CONFIG, cppunit-config, no)
++ cppunit_version_min=$1
++
++ AC_MSG_CHECKING(for Cppunit - version >= $cppunit_version_min)
++ no_cppunit=""
++ if test "x$enable_cppunit" != "xyes"; then
++ no_cppunit=user
++ elif test "$CPPUNIT_CONFIG" = "no" ; then
++ no_cppunit=yes
++ else
++ CPPUNIT_CFLAGS=`$CPPUNIT_CONFIG --cflags`
++ CPPUNIT_LIBS=`$CPPUNIT_CONFIG --libs`
++ cppunit_version=`$CPPUNIT_CONFIG --version`
++
++ cppunit_major_version=`echo $cppunit_version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
++ cppunit_minor_version=`echo $cppunit_version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
++ cppunit_micro_version=`echo $cppunit_version | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
++
++ cppunit_major_min=`echo $cppunit_version_min | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
++ cppunit_minor_min=`echo $cppunit_version_min | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
++ cppunit_micro_min=`echo $cppunit_version_min | \
++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
++
++ cppunit_version_proper=`expr \
++ $cppunit_major_version \> $cppunit_major_min \| \
++ $cppunit_major_version \= $cppunit_major_min \& \
++ $cppunit_minor_version \> $cppunit_minor_min \| \
++ $cppunit_major_version \= $cppunit_major_min \& \
++ $cppunit_minor_version \= $cppunit_minor_min \& \
++ $cppunit_micro_version \>= $cppunit_micro_min `
++
++ if test "$cppunit_version_proper" = "1" ; then
++ AC_MSG_RESULT([$cppunit_major_version.$cppunit_minor_version.$cppunit_micro_version])
++ else
++ AC_MSG_RESULT(no)
++ no_cppunit=yes
++ fi
++ fi
++
++ if test "x$no_cppunit" = x ; then
++ ifelse([$2], , :, [$2])
++ if test "x$enable_online_tests" = "xyes"; then
++ AC_DEFINE_UNQUOTED(PERFORM_ONLINE_UNITTESTS, 1, [Define if unit tests requiring online access should be compiled])
++ fi
++ else
++ CPPUNIT_CFLAGS=""
++ CPPUNIT_LIBS=""
++ ifelse([$3], , :, [$3])
++ fi
++
++ AC_SUBST(CPPUNIT_CFLAGS)
++ AC_SUBST(CPPUNIT_LIBS)
++])
++
++
++
++# $Id: kbanking.m4,v 1.6.2.2 2006/12/04 17:50:45 ipwizard Exp $
++# (c) 2004 Martin Preuss<martin at libchipcard.de>
++# This function checks for KBanking
++
++AC_DEFUN([AC_KBANKING], [
++dnl searches for kbanking
++dnl Arguments:
++dnl $1: major version minimum
++dnl $2: minor version minimum
++dnl $3: patchlevel version minimum
++dnl $4: build version minimum
++dnl Returns: kbanking_dir
++dnl kbanking_libs
++dnl kbanking_data
++dnl kbanking_includes
++dnl have_kbanking
++dnl kbanking_plugin
++
++if test -z "$1"; then vma="0"; else vma="$1"; fi
++if test -z "$2"; then vmi="1"; else vmi="$2"; fi
++if test -z "$3"; then vpl="0"; else vpl="$3"; fi
++if test -z "$4"; then vbld="0"; else vbld="$4"; fi
++
++AC_MSG_CHECKING(if kbanking support desired)
++AC_ARG_ENABLE(kbanking,
++ [ --enable-kbanking enable kbanking support (default=auto)],
++ enable_kbanking="$enableval",
++ enable_kbanking="auto")
++AC_MSG_RESULT($enable_kbanking)
++
++have_kbanking="no"
++kbanking_dir=""
++kbanking_data=""
++kbanking_libs=""
++kbanking_includes=""
++kbanking_plugin=""
++if test "$enable_kbanking" != "no"; then
++ AC_MSG_CHECKING(for kbanking)
++ AC_ARG_WITH(kbanking-dir, [ --with-kbanking-dir=DIR
++ uses kbanking from given dir],
++ [lcc_dir="$withval"],
++ [lcc_dir="${prefix} \
++ /usr/local \
++ /usr \
++ /"])
++
++ for li in $lcc_dir; do
++ if test -x "$li/bin/kbanking-config"; then
++ kbanking_dir="$li";
++ break
++ fi
++ done
++ if test -z "$kbanking_dir"; then
++ AC_MSG_RESULT([not found ])
++ have_kbanking="no"
++ else
++ AC_MSG_RESULT($kbanking_dir)
++ AC_MSG_CHECKING(for kbanking libs)
++ kbanking_libs="`$kbanking_dir/bin/kbanking-config --libraries`"
++ kbanking_libs="$kbanking_libs -lqbanking -laqbanking -lgwenhywfar"
++ AC_MSG_RESULT($kbanking_libs)
++ AC_MSG_CHECKING(for kbanking includes)
++ kbanking_includes="`$kbanking_dir/bin/kbanking-config --includes`"
++ AC_MSG_RESULT($kbanking_includes)
++ AC_MSG_CHECKING(for kbanking data)
++ kbanking_data="`$kbanking_dir/bin/kbanking-config --data`"
++ AC_MSG_RESULT($kbanking_data)
++
++ AC_MSG_CHECKING(if kbanking test desired)
++ AC_ARG_ENABLE(kbanking,
++ [ --enable-kbanking-test enable kbanking-test (default=yes)],
++ enable_kbanking_test="$enableval",
++ enable_kbanking_test="yes")
++ AC_MSG_RESULT($enable_kbanking_test)
++ AC_MSG_CHECKING(for KBanking version >=$vma.$vmi.$vpl.$vbld)
++ if test "$enable_kbanking_test" != "no"; then
++ kbanking_versionstring="`$kbanking_dir/bin/kbanking-config --vstring`.`$kbanking_dir/bin/kbanking-config --vbuild`"
++ AC_MSG_RESULT([found $kbanking_versionstring])
++ if test "$vma" -gt "`$kbanking_dir/bin/kbanking-config --vmajor`"; then
++ AC_MSG_ERROR([Your KBanking version is way too old.
++ Please update from http://www.aquamaniac.de/kbanking/])
++ elif test "$vma" = "`$kbanking_dir/bin/kbanking-config --vmajor`"; then
++ if test "$vmi" -gt "`$kbanking_dir/bin/kbanking-config --vminor`"; then
++ AC_MSG_ERROR([Your KBanking version is too old.
++ Please update from http://www.aquamaniac.de/kbanking/])
++ elif test "$vmi" = "`$kbanking_dir/bin/kbanking-config --vminor`"; then
++ if test "$vpl" -gt "`$kbanking_dir/bin/kbanking-config --vpatchlevel`"; then
++ AC_MSG_ERROR([Your KBanking version is a little bit too old.
++ Please update from http://www.aquamaniac.de/kbanking/])
++ elif test "$vpl" = "`$kbanking_dir/bin/kbanking-config --vpatchlevel`"; then
++ if test "$vbld" -gt "`$kbanking_dir/bin/kbanking-config --vbuild`"; then
++ AC_MSG_ERROR([Your KBanking version is a little bit too old.
++ Please update to the latest CVS version. Instructions for accessing
++ CVS can be found on http://www.aquamaniac.de/kbanking/])
++ fi
++ fi
++ fi
++ fi
++ have_kbanking="yes"
++ kbanking_plugin="kbanking"
++ #AC_MSG_RESULT(yes)
++ AC_DEFINE_UNQUOTED(HAVE_KBANKING, 1, [Defines if your system has the kbanking package])
++ else
++ have_kbanking="yes"
++ kbanking_plugin="kbanking"
++ AC_MSG_RESULT(assuming yes)
++ AC_DEFINE_UNQUOTED(HAVE_KBANKING, 1, [Defines if your system has the kbanking package])
++ fi
++ fi
++dnl end of "if enable-kbanking"
++fi
++
++AC_SUBST(kbanking_dir)
++AC_SUBST(kbanking_libs)
++AC_SUBST(kbanking_data)
++AC_SUBST(kbanking_includes)
++AC_SUBST(kbanking_plugin)
++])
++AC_DEFUN([AC_LIBOFX],
++[
++AC_MSG_CHECKING(if the OFX importer plugin is desired)
++AC_ARG_ENABLE(ofxplugin,
++ [ --enable-ofxplugin enable OFX support (default=yes)],
++ enable_ofxplugin="$enableval",
++ enable_ofxplugin="yes")
++AC_MSG_RESULT($enable_ofxplugin)
++
++AC_MSG_CHECKING(if OFX direct connect is desired)
++AC_ARG_ENABLE(ofxbanking,
++ [ --enable-ofxbanking enable OFX direct connect (default=no)],
++ enable_ofxbanking="$enableval",
++ enable_ofxbanking="no")
++AC_MSG_RESULT($enable_ofxbanking)
++
++ofx_libs=""
++ofx_importerplugin=""
++
++if test "$enable_ofxplugin" != "no"; then
++ ac_save_CFLAGS="$CFLAGS"
++ CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
++ AC_CHECK_HEADER([OpenSP/macros.h], [
++ AC_CHECK_LIB(ofx, libofx_proc_file,[have_new_ofx="yes"], [have_new_ofx="no"])
++ if test "$have_new_ofx" == "yes"; then
++ ofx_importerplugin="ofximport"
++ ofx_libs="-lofx"
++ fi
++ ], [], [])
++ CFLAGS="$ac_save_CFLAGS"
++fi
++
++if test "$enable_ofxbanking" != "no"; then
++ ac_save_CFLAGS="$CFLAGS"
++ CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
++ AC_CHECK_HEADER([OpenSP/macros.h], [
++ AC_CHECK_LIB(ofx, libofx_proc_file,[have_new_ofx="yes"], [have_new_ofx="no"])
++ if test "$have_new_ofx" == "yes"; then
++ AC_DEFINE_UNQUOTED(USE_OFX_DIRECTCONNECT, "1", [whether to use OFX directconnect])
++ LIBS="-lofx $LIBS"
++ fi
++ ], [], [])
++ CFLAGS="$ac_save_CFLAGS"
++fi
++AC_SUBST(ofx_libs)
++AC_SUBST(ofx_importerplugin)
++])
++
++dnl
++dnl check the memory leakage checker option
++dnl if enabled or disabled, directly controlled
++dnl if not given, follows --enable-debug and if
++dnl debugging support is turned on, the memory
++dnl leakage checker is turned on also
++dnl
++dnl Need AC_CHECK_COMPILERS to be run before
++AC_DEFUN([AC_MEMORY_LEAK_CHECK], [
++ AC_ARG_ENABLE(
++ leak-check,
++ AC_HELP_STRING([--enable-leak-check],[enable memory leak checker (default=yes)]),
++ use_memory_leak_check=$enableval,
++ use_memory_leak_check=$kde_use_debug_code)
++
++ if test "x$use_memory_leak_check" != "xno"; then
++ CPPFLAGS="$CPPFLAGS -D_CHECK_MEMORY"
++ fi
++ if test "x$kde_use_debug_code" != "xno"; then
++ CPPFLAGS="$CPPFLAGS -DKMM_DEBUG=1"
++ else
++ CPPFLAGS="$CPPFLAGS -DKMM_DEBUG=0"
++ fi
++])
++
++dnl
++dnl check the pdf generation option
++dnl if enabled or disabled, directly controlled
++dnl
++AC_DEFUN([AC_PDF_GENERATION], [
++ AC_MSG_CHECKING(if the PDF document generation is desired)
++ AC_ARG_ENABLE( pdf-docs,
++ [ --enable-pdf-docs enable generation of PDF documents (default=no)],
++ enable_pdfdocs="$enableval",
++ enable_pdfdocs="no")
++ AC_MSG_RESULT($enable_pdfdocs)
++
++ AM_CONDITIONAL(GENERATE_PDF, test "x$enable_pdfdocs" = "xyes")
++
++ if test "x$enable_pdfdocs" = "xyes"; then
++ dnl html2ps and ps2pdf
++ AC_CHECK_PROG(found_html2ps, html2ps, yes, no)
++ AC_CHECK_PROG(found_ps2pdf, ps2pdf14, yes, no)
++ AC_CHECK_PROG(found_jade, jade, yes, no)
++ AC_CHECK_PROG(found_pdfjadetex, pdfjadetex, yes, no)
++ fi
++
++ AM_CONDITIONAL(HAVE_HTMLCONVERSIONTOOLS, test "x$enable_pdfdocs" = "xyes" -a "x$found_ps2pdf" = "xyes" -a "x$found_html2ps" = "xyes")
++ AM_CONDITIONAL(HAVE_DSSSLCONVERSIONTOOLS, test "x$enable_pdfdocs" = "xyes" -a "x$found_jade" = "xyes" -a "x$found_pdfjadetex" = "xyes")
++])
++
Added: kde-extras/kmymoney2/trunk/debian/patches/02_autotools_update.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/02_autotools_update.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/02_autotools_update.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,731 @@
+--- a/admin/depcomp
++++ b/admin/depcomp
+@@ -1,9 +1,10 @@
+ #! /bin/sh
+ # depcomp - compile a program generating dependencies as side-effects
+
+-scriptversion=2005-07-09.11
++scriptversion=2006-10-15.18
+
+-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
++# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
++# Foundation, Inc.
+
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+@@ -91,7 +92,20 @@
+ ## gcc 3 implements dependency tracking that does exactly what
+ ## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+ ## it if -MD -MP comes after the -MF stuff. Hmm.
+- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
++## Unfortunately, FreeBSD c89 acceptance of flags depends upon
++## the command line argument order; so add the flags where they
++## appear in depend2.am. Note that the slowdown incurred here
++## affects only configure: in makefiles, %FASTDEP% shortcuts this.
++ for arg
++ do
++ case $arg in
++ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
++ *) set fnord "$@" "$arg" ;;
++ esac
++ shift # fnord
++ shift # $arg
++ done
++ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+@@ -276,6 +290,46 @@
+ rm -f "$tmpdepfile"
+ ;;
+
++hp2)
++ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
++ # compilers, which have integrated preprocessors. The correct option
++ # to use with these is +Maked; it writes dependencies to a file named
++ # 'foo.d', which lands next to the object file, wherever that
++ # happens to be.
++ # Much of this is similar to the tru64 case; see comments there.
++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++ test "x$dir" = "x$object" && dir=
++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
++ if test "$libtool" = yes; then
++ tmpdepfile1=$dir$base.d
++ tmpdepfile2=$dir.libs/$base.d
++ "$@" -Wc,+Maked
++ else
++ tmpdepfile1=$dir$base.d
++ tmpdepfile2=$dir$base.d
++ "$@" +Maked
++ fi
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile1" "$tmpdepfile2"
++ exit $stat
++ fi
++
++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
++ do
++ test -f "$tmpdepfile" && break
++ done
++ if test -f "$tmpdepfile"; then
++ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
++ # Add `dependent.h:' lines.
++ sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
++ else
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile" "$tmpdepfile2"
++ ;;
++
+ tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+@@ -288,13 +342,13 @@
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+- # static library. This mecanism is used in libtool 1.4 series to
++ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+- # compilations output dependencies in in $dir.libs/$base.o.d and
++ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+--- a/admin/install-sh
++++ b/admin/install-sh
+@@ -1,7 +1,7 @@
+ #!/bin/sh
+ # install - install a program, script, or datafile
+
+-scriptversion=2005-11-07.23
++scriptversion=2006-10-14.15
+
+ # This originates from X11R5 (mit/util/scripts/install.sh), which was
+ # later released in X11R6 (xc/config/util/install.sh) with the
+@@ -39,15 +39,24 @@
+ # when there is no Makefile.
+ #
+ # This script is compatible with the BSD install script, but was written
+-# from scratch. It can only install one file at a time, a restriction
+-# shared with many OS's install programs.
++# from scratch.
++
++nl='
++'
++IFS=" "" $nl"
+
+ # set DOITPROG to echo to test this script
+
+ # Don't use :- since 4.3BSD and earlier shells don't like it.
+ doit="${DOITPROG-}"
++if test -z "$doit"; then
++ doit_exec=exec
++else
++ doit_exec=$doit
++fi
+
+-# put in absolute paths if you don't have them in your path; or use env. vars.
++# Put in absolute file names if you don't have them in your path;
++# or use environment vars.
+
+ mvprog="${MVPROG-mv}"
+ cpprog="${CPPROG-cp}"
+@@ -61,17 +70,9 @@
+ posix_glob=
+ posix_mkdir=
+
+-# Symbolic mode for testing mkdir with directories.
+-# It is the same as 755, but also tests that "u+" works.
+-test_mode=u=rwx,g=rx,o=rx,u+wx
+-
+ # Desired mode of installed file.
+ mode=0755
+
+-# Desired mode of newly created intermediate directories.
+-# It is empty if not known yet.
+-intermediate_mode=
+-
+ chmodcmd=$chmodprog
+ chowncmd=
+ chgrpcmd=
+@@ -109,7 +110,7 @@
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+ "
+
+-while test -n "$1"; do
++while test $# -ne 0; do
+ case $1 in
+ -c) shift
+ continue;;
+@@ -128,6 +129,12 @@
+ -m) mode=$2
+ shift
+ shift
++ case $mode in
++ *' '* | *' '* | *'
++'* | *'*'* | *'?'* | *'['*)
++ echo "$0: invalid mode: $mode" >&2
++ exit 1;;
++ esac
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+@@ -150,25 +157,33 @@
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+- *) # When -d is used, all remaining arguments are directories to create.
+- # When -t is used, the destination is already specified.
+- test -n "$dir_arg$dstarg" && break
+- # Otherwise, the last argument is the destination. Remove it from $@.
+- for arg
+- do
+- if test -n "$dstarg"; then
+- # $@ is not empty: it contains at least $arg.
+- set fnord "$@" "$dstarg"
+- shift # fnord
+- fi
+- shift # arg
+- dstarg=$arg
+- done
++ --) shift
+ break;;
++
++ -*) echo "$0: invalid option: $1" >&2
++ exit 1;;
++
++ *) break;;
+ esac
+ done
+
+-if test -z "$1"; then
++if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
++ # When -d is used, all remaining arguments are directories to create.
++ # When -t is used, the destination is already specified.
++ # Otherwise, the last argument is the destination. Remove it from $@.
++ for arg
++ do
++ if test -n "$dstarg"; then
++ # $@ is not empty: it contains at least $arg.
++ set fnord "$@" "$dstarg"
++ shift # fnord
++ fi
++ shift # arg
++ dstarg=$arg
++ done
++fi
++
++if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+@@ -178,7 +193,32 @@
+ exit 0
+ fi
+
+-test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
++if test -z "$dir_arg"; then
++ trap '(exit $?); exit' 1 2 13 15
++
++ # Set umask so as not to create temps with too-generous modes.
++ # However, 'strip' requires both read and write access to temps.
++ case $mode in
++ # Optimize common cases.
++ *644) cp_umask=133;;
++ *755) cp_umask=22;;
++
++ *[0-7])
++ if test -z "$stripcmd"; then
++ u_plus_rw=
++ else
++ u_plus_rw='% 200'
++ fi
++ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
++ *)
++ if test -z "$stripcmd"; then
++ u_plus_rw=
++ else
++ u_plus_rw=,u+rw
++ fi
++ cp_umask=$mode$u_plus_rw;;
++ esac
++fi
+
+ for src
+ do
+@@ -230,14 +270,25 @@
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+- X"$dst" : 'X\(/\)' \| \
+- . : '\(.\)' 2>/dev/null ||
++ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+- /^X\(\/\/\)$/{ s//\1/; q; }
+- /^X\(\/\).*/{ s//\1/; q; }
+- s/.*/./; q'
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+@@ -250,51 +301,86 @@
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+- posix_mkdir=false
+- if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
+- posix_mkdir=true
+- else
+- # Remove any dirs left behind by ancient mkdir implementations.
+- rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
+- fi ;;
+- esac
+-
+- if
+- $posix_mkdir && {
++ # Create intermediate dirs using mode 755 as modified by the umask.
++ # This is like FreeBSD 'install' as of 1997-10-28.
++ umask=`umask`
++ case $stripcmd.$umask in
++ # Optimize common cases.
++ *[2367][2367]) mkdir_umask=$umask;;
++ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
++
++ *[0-7])
++ mkdir_umask=`expr $umask + 22 \
++ - $umask % 100 % 40 + $umask % 20 \
++ - $umask % 10 % 4 + $umask % 2
++ `;;
++ *) mkdir_umask=$umask,go-w;;
++ esac
+
+ # With -d, create the new directory with the user-specified mode.
+- # Otherwise, create it using the same intermediate mode that
+- # mkdir -p would use when creating intermediate directories.
+- # POSIX says that this mode is "$(umask -S),u+wx", so use that
+- # if umask -S works.
+-
++ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+- mkdir_mode=$mode
++ mkdir_mode=-m$mode
+ else
+- case $intermediate_mode in
+- '')
+- if umask_S=`(umask -S) 2>/dev/null`; then
+- intermediate_mode=$umask_S,u+wx
+- else
+- intermediate_mode=$test_mode
+- fi ;;
+- esac
+- mkdir_mode=$intermediate_mode
++ mkdir_mode=
+ fi
+
+- $mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
+- }
++ posix_mkdir=false
++ case $umask in
++ *[123567][0-7][0-7])
++ # POSIX mkdir -p sets u+wx bits regardless of umask, which
++ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
++ ;;
++ *)
++ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
++ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
++
++ if (umask $mkdir_umask &&
++ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
++ then
++ if test -z "$dir_arg" || {
++ # Check for POSIX incompatibilities with -m.
++ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
++ # other-writeable bit of parent directory when it shouldn't.
++ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
++ ls_ld_tmpdir=`ls -ld "$tmpdir"`
++ case $ls_ld_tmpdir in
++ d????-?r-*) different_mode=700;;
++ d????-?--*) different_mode=755;;
++ *) false;;
++ esac &&
++ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
++ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
++ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
++ }
++ }
++ then posix_mkdir=:
++ fi
++ rmdir "$tmpdir/d" "$tmpdir"
++ else
++ # Remove any dirs left behind by ancient mkdir implementations.
++ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
++ fi
++ trap '' 0;;
++ esac;;
++ esac
++
++ if
++ $posix_mkdir && (
++ umask $mkdir_umask &&
++ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
++ )
+ then :
+ else
+
+- # mkdir does not conform to POSIX, or it failed possibly due to
+- # a race condition. Create the directory the slow way, step by
+- # step, checking for races as we go.
++ # The umask is ridiculous, or mkdir does not conform to POSIX,
++ # or it failed possibly due to a race condition. Create the
++ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+- /*) pathcomp=/ ;;
+- -*) pathcomp=./ ;;
+- *) pathcomp= ;;
++ /*) prefix=/ ;;
++ -*) prefix=./ ;;
++ *) prefix= ;;
+ esac
+
+ case $posix_glob in
+@@ -314,19 +400,39 @@
+ $posix_glob && set +f
+ IFS=$oIFS
+
++ prefixes=
++
+ for d
+ do
+- test "x$d" = x && continue
++ test -z "$d" && continue
+
+- pathcomp=$pathcomp$d
+- if test ! -d "$pathcomp"; then
+- $mkdirprog "$pathcomp"
+- # Don't fail if two instances are running concurrently.
+- test -d "$pathcomp" || exit 1
++ prefix=$prefix$d
++ if test -d "$prefix"; then
++ prefixes=
++ else
++ if $posix_mkdir; then
++ (umask=$mkdir_umask &&
++ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
++ # Don't fail if two instances are running concurrently.
++ test -d "$prefix" || exit 1
++ else
++ case $prefix in
++ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
++ *) qprefix=$prefix;;
++ esac
++ prefixes="$prefixes '$qprefix'"
++ fi
+ fi
+- pathcomp=$pathcomp/
++ prefix=$prefix/
+ done
+- obsolete_mkdir_used=true
++
++ if test -n "$prefixes"; then
++ # Don't fail if two instances are running concurrently.
++ (umask $mkdir_umask &&
++ eval "\$doit_exec \$mkdirprog $prefixes") ||
++ test -d "$dstdir" || exit 1
++ obsolete_mkdir_used=true
++ fi
+ fi
+ fi
+
+@@ -334,7 +440,7 @@
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+- test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
++ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+@@ -345,7 +451,7 @@
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+- $doit $cpprog "$src" "$dsttmp" &&
++ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+@@ -356,7 +462,7 @@
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+- && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&
++ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+--- a/admin/missing
++++ b/admin/missing
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Common stub for a few missing GNU programs while installing.
+
+-scriptversion=2004-09-07.08
++scriptversion=2006-05-10.23
+
+-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+ # Free Software Foundation, Inc.
+ # Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+
+@@ -19,8 +19,8 @@
+
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
+
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+@@ -33,6 +33,8 @@
+ fi
+
+ run=:
++sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
++sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+ # In the cases where this matters, `missing' is being run in the
+ # srcdir already.
+@@ -44,7 +46,7 @@
+
+ msg="missing on your system"
+
+-case "$1" in
++case $1 in
+ --run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+@@ -77,6 +79,7 @@
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
++ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+@@ -87,12 +90,12 @@
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+ Send bug reports to <bug-automake at gnu.org>."
+- exit 0
++ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+- exit 0
++ exit $?
+ ;;
+
+ -*)
+@@ -106,7 +109,7 @@
+ # Now exit if we have it, but it failed. Also exit now if we
+ # don't have it and --version was passed (most likely to detect
+ # the program).
+-case "$1" in
++case $1 in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+@@ -135,7 +138,7 @@
+
+ # If it does not exist, or fails to run (possibly an outdated version),
+ # try to emulate it.
+-case "$1" in
++case $1 in
+ aclocal*)
+ echo 1>&2 "\
+ WARNING: \`$1' is $msg. You should only need it if
+@@ -164,7 +167,7 @@
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+- case "$f" in
++ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+@@ -192,8 +195,8 @@
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+@@ -214,25 +217,25 @@
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+- if [ $# -ne 1 ]; then
++ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+- case "$LASTARG" in
++ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+- if [ -f "$SRCFILE" ]; then
++ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+- if [ -f "$SRCFILE" ]; then
++ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+- if [ ! -f y.tab.h ]; then
++ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+- if [ ! -f y.tab.c ]; then
++ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+@@ -244,18 +247,18 @@
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+- if [ $# -ne 1 ]; then
++ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+- case "$LASTARG" in
++ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+- if [ -f "$SRCFILE" ]; then
++ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+- if [ ! -f lex.yy.c ]; then
++ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+@@ -267,11 +270,9 @@
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+- if test -z "$file"; then
+- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+- fi
+- if [ -f "$file" ]; then
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+@@ -288,11 +289,24 @@
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
++ # The file to touch is that specified with -o ...
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+- fi
++ # ... or it is the one specified with @setfilename ...
++ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
++ file=`sed -n '
++ /^@setfilename/{
++ s/.* \([^ ]*\) *$/\1/
++ p
++ q
++ }' $infile`
++ # ... or it is derived from the source name (dir/f.texi becomes f.info)
++ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
++ fi
++ # If the file does not exist, the user really needs makeinfo;
++ # let's fail without touching anything.
++ test -f $file || exit 1
+ touch $file
+ ;;
+
+@@ -310,13 +324,13 @@
+ fi
+ firstarg="$1"
+ if shift; then
+- case "$firstarg" in
++ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+- case "$firstarg" in
++ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+--- a/admin/mkinstalldirs
++++ b/admin/mkinstalldirs
+@@ -1,7 +1,7 @@
+ #! /bin/sh
+ # mkinstalldirs --- make directory hierarchy
+
+-scriptversion=2005-06-29.22
++scriptversion=2006-05-11.19
+
+ # Original author: Noah Friedman <friedman at prep.ai.mit.edu>
+ # Created: 1993-05-16
+@@ -11,6 +11,9 @@
+ # bugs to <bug-automake at gnu.org> or send patches to
+ # <automake-patches at gnu.org>.
+
++nl='
++'
++IFS=" "" $nl"
+ errstatus=0
+ dirmode=
+
Added: kde-extras/kmymoney2/trunk/debian/patches/03_libtool_update.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/03_libtool_update.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/03_libtool_update.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,8685 @@
+--- a/admin/libtool.m4.in
++++ b/admin/libtool.m4.in
+@@ -1,28 +1,13 @@
+ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+-## Copyright 1996, 1997, 1998, 1999, 2000, 2001
++## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007
+ ## Free Software Foundation, Inc.
+ ## Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+ ##
+-## This program is free software; you can redistribute it and/or modify
+-## it under the terms of the GNU General Public License as published by
+-## the Free Software Foundation; either version 2 of the License, or
+-## (at your option) any later version.
+-##
+-## This program is distributed in the hope that it will be useful, but
+-## WITHOUT ANY WARRANTY; without even the implied warranty of
+-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+-## General Public License for more details.
+-##
+-## You should have received a copy of the GNU General Public License
+-## along with this program; if not, write to the Free Software
+-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+-##
+-## As a special exception to the GNU General Public License, if you
+-## distribute this file as part of a program that contains a
+-## configuration script generated by Autoconf, you may include it under
+-## the same distribution terms that you use for the rest of that program.
++## This file is free software; the Free Software Foundation gives
++## unlimited permission to copy and/or distribute it, with or without
++## modifications, as long as this notice is preserved.
+
+-# serial 47 AC_PROG_LIBTOOL
++# serial 51 Debian 1.5.24-2 AC_PROG_LIBTOOL
+
+
+ # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+@@ -82,7 +67,7 @@
+ LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent'
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+ AC_SUBST(LIBTOOL)dnl
+
+ # Prevent multiple expansion
+@@ -132,7 +117,7 @@
+
+ # Sed substitution that helps us do robust quoting. It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e s/^X//'
++Xsed='sed -e 1s/^X//'
+ [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+
+ # Same as above, but do not quote variable references.
+@@ -152,7 +137,7 @@
+ default_ofile=libtool
+ can_build_shared=yes
+
+-# All known linkers require a `.a' archive for static linking (except M$VC,
++# All known linkers require a `.a' archive for static linking (except MSVC,
+ # which needs '.lib').
+ libext=a
+ ltmain="$ac_aux_dir/ltmain.sh"
+@@ -172,6 +157,7 @@
+ test -z "$AS" && AS=as
+ test -z "$CC" && CC=cc
+ test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+ test -z "$DLLTOOL" && DLLTOOL=dlltool
+ test -z "$LD" && LD=ld
+ test -z "$LN_S" && LN_S="ln -s"
+@@ -184,22 +170,24 @@
+ test -z "$ac_objext" && ac_objext=o
+
+ # Determine commands to create old-style static archives.
+-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+ old_postinstall_cmds='chmod 644 $oldlib'
+ old_postuninstall_cmds=
+
+ if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ fi
+
++_LT_CC_BASENAME([$compiler])
++
+ # Only perform the check for file, if the check method requires it
+ case $deplibs_check_method in
+ file_magic*)
+@@ -240,11 +228,58 @@
+ # If no C compiler was specified, use CC.
+ LTCC=${LTCC-"$CC"}
+
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
+ # Allow CC to be a program name with arguments.
+ compiler=$CC
+ ])# _LT_AC_SYS_COMPILER
+
+
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
++AC_DEFUN([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++ case $cc_temp in
++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++ \-*) ;;
++ *) break;;
++ esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++])
++
++
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++AC_DEFUN([_LT_COMPILER_BOILERPLATE],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_COMPILER_BOILERPLATE
++
++
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++AC_DEFUN([_LT_LINKER_BOILERPLATE],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_LINKER_BOILERPLATE
++
++
+ # _LT_AC_SYS_LIBPATH_AIX
+ # ----------------------
+ # Links a minimal program and checks the executable
+@@ -254,12 +289,20 @@
+ # If we don't find anything, use the default library path according
+ # to the aix ld manual.
+ AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+-}'`
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_LINK_IFELSE(AC_LANG_PROGRAM,[
++lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\(.*\)$/\1/
++ p
++ }
++ }'
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+-}'`; fi],[])
++if test -z "$aix_libpath"; then
++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++fi],[])
+ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ ])# _LT_AC_SYS_LIBPATH_AIX
+
+@@ -317,15 +360,15 @@
+
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+ if test -z "$ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+- echo_test_string="`eval $cmd`" &&
++ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
++ echo_test_string=`eval $cmd` &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+ then
+ break
+@@ -490,18 +533,21 @@
+ rm -rf conftest*
+ ;;
+
+-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+- case "`/usr/bin/file conftest.o`" in
++ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+- LINUX_64_MODE="32"
+ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_i386_fbsd"
++ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+- ppc64-*linux*)
++ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+@@ -513,8 +559,10 @@
+ esac
+ ;;
+ *64-bit*)
+- LINUX_64_MODE="64"
+ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_x86_64_fbsd"
++ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+@@ -547,6 +595,22 @@
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
++sparc*-*solaris*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *64-bit*)
++ case $lt_cv_prog_gnu_ld in
++ yes*) LD="${LD-ld} -m elf64_sparc" ;;
++ *) LD="${LD-ld} -64" ;;
++ esac
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++
+ AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+ [*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+@@ -570,7 +634,7 @@
+ AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+@@ -578,7 +642,7 @@
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+@@ -588,8 +652,10 @@
+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- if test ! -s conftest.err; then
++ # So say no if there are warnings other than the usual output.
++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+@@ -609,17 +675,23 @@
+ # ------------------------------------------------------------
+ # Check whether the given compiler option works
+ AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+-[AC_CACHE_CHECK([$1], [$2],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+- printf "$lt_simple_link_test_code" > conftest.$ac_ext
++ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+- # The compiler can only warn and ignore the option if not recognized
++ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
++ fi
+ else
+ $2=yes
+ fi
+@@ -643,7 +715,7 @@
+ AC_MSG_CHECKING([the maximum length of command line arguments])
+ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+- testring="ABCD"
++ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+@@ -672,24 +744,77 @@
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+- *)
+- # If test is not a shell built-in, we'll probably end up computing a
+- # maximum length that is only half of the actual maximum length, but
+- # we can't tell.
+- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
+- = "XX$testring") >/dev/null 2>&1 &&
+- new_result=`expr "X$testring" : ".*" 2>&1` &&
+- lt_cv_sys_max_cmd_len=$new_result &&
+- test $i != 17 # 1/2 MB should be enough
+- do
+- i=`expr $i + 1`
+- testring=$testring$testring
+- done
+- testring=
+- # Add a significant safety factor because C++ compilers can tack on massive
+- # amounts of additional arguments before passing them to the linker.
+- # It appears as though 1/2 is a usable value.
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++ amigaos*)
++ # On AmigaOS with pdksh, this test takes hours, literally.
++ # So we just punt and use a minimum line length of 8192.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++ # This has been around since 386BSD, at least. Likely further.
++ if test -x /sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++ elif test -x /usr/sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++ else
++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
++ fi
++ # And add a safety zone
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ ;;
++
++ interix*)
++ # We know the value 262144 and hardcode it with a safety zone (like BSD)
++ lt_cv_sys_max_cmd_len=196608
++ ;;
++
++ osf*)
++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++ # nice to cause kernel panics so lets avoid the loop below.
++ # First set a reasonable default.
++ lt_cv_sys_max_cmd_len=16384
++ #
++ if test -x /sbin/sysconfig; then
++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++ *1*) lt_cv_sys_max_cmd_len=-1 ;;
++ esac
++ fi
++ ;;
++ sco3.2v5*)
++ lt_cv_sys_max_cmd_len=102400
++ ;;
++ sysv5* | sco5v6* | sysv4.2uw2*)
++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++ if test -n "$kargmax"; then
++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
++ else
++ lt_cv_sys_max_cmd_len=32768
++ fi
++ ;;
++ *)
++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++ if test -n "$lt_cv_sys_max_cmd_len"; then
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ else
++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
++ = "XX$teststring") >/dev/null 2>&1 &&
++ new_result=`expr "X$teststring" : ".*" 2>&1` &&
++ lt_cv_sys_max_cmd_len=$new_result &&
++ test $i != 17 # 1/2 MB should be enough
++ do
++ i=`expr $i + 1`
++ teststring=$teststring$teststring
++ done
++ teststring=
++ # Add a significant safety factor because C++ compilers can tack on massive
++ # amounts of additional arguments before passing them to the linker.
++ # It appears as though 1/2 is a usable value.
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++ fi
+ ;;
+ esac
+ ])
+@@ -702,7 +827,7 @@
+
+
+ # _LT_AC_CHECK_DLFCN
+-# --------------------
++# ------------------
+ AC_DEFUN([_LT_AC_CHECK_DLFCN],
+ [AC_CHECK_HEADERS(dlfcn.h)dnl
+ ])# _LT_AC_CHECK_DLFCN
+@@ -710,7 +835,7 @@
+
+ # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+ # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+-# ------------------------------------------------------------------
++# ---------------------------------------------------------------------
+ AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+ [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+ if test "$cross_compiling" = yes; then :
+@@ -776,17 +901,19 @@
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
++ else
++ puts (dlerror ());
+
+ exit (status);
+ }]
+ EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+- (./conftest; exit; ) 2>/dev/null
++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+- x$lt_unknown|x*) $3 ;;
++ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+@@ -798,7 +925,7 @@
+
+
+ # AC_LIBTOOL_DLOPEN_SELF
+-# -------------------
++# ----------------------
+ AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+ [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+ if test "x$enable_dlopen" != xyes; then
+@@ -835,7 +962,7 @@
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+-
++
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+@@ -869,7 +996,7 @@
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+@@ -882,7 +1009,7 @@
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+- LDFLAGS="$LDFLAGS $link_static_flag"
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_AC_TRY_DLOPEN_SELF(
+@@ -914,7 +1041,8 @@
+ # ---------------------------------
+ # Check to see if options -c and -o are simultaneously supported by compiler
+ AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+@@ -922,14 +1050,7 @@
+ mkdir conftest
+ cd conftest
+ mkdir out
+- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
+- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+- # that will create temporary files in the current directory regardless of
+- # the output directory. Thus, making CWD read-only will cause this test
+- # to fail, enabling locking or at least warning the user not to do parallel
+- # builds.
+- chmod -w .
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+@@ -937,7 +1058,7 @@
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+@@ -949,13 +1070,18 @@
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+- if test ! -s out/conftest.err; then
++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+- chmod u+w .
+- $rm conftest* out/*
+- rmdir out
++ chmod u+w . 2>&AS_MESSAGE_LOG_FD
++ $rm conftest*
++ # SGI C++ compiler will create directory out/ii_files/ for
++ # template instantiation
++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++ $rm out/* && rmdir out
+ cd ..
+ rmdir conftest
+ $rm conftest*
+@@ -1014,8 +1140,8 @@
+ [AC_MSG_CHECKING([how to hardcode library paths into programs])
+ _LT_AC_TAGVAR(hardcode_action, $1)=
+ if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
+- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
++ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
++ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+ # We can hardcode non-existant directories.
+ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+@@ -1064,6 +1190,7 @@
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
++ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+@@ -1072,7 +1199,7 @@
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+- esac
++ esac
+ fi
+ ])# AC_LIBTOOL_SYS_LIB_STRIP
+
+@@ -1081,11 +1208,12 @@
+ # -----------------------------
+ # PORTME Fill in your ld.so characteristics
+ AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+-[AC_MSG_CHECKING([dynamic linker characteristics])
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_MSG_CHECKING([dynamic linker characteristics])
+ library_names_spec=
+ libname_spec='lib$name'
+ soname_spec=
+-shrext=".so"
++shrext_cmds=".so"
+ postinstall_cmds=
+ postuninstall_cmds=
+ finish_cmds=
+@@ -1095,7 +1223,58 @@
+ version_type=none
+ dynamic_linker="$host_os ld.so"
+ sys_lib_dlsearch_path_spec="/lib /usr/lib"
+-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++m4_if($1,[],[
++if test "$GCC" = yes; then
++ case $host_os in
++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++ *) lt_awk_arg="/^libraries:/" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
++ # if the path contains ";" then we assume it to be the separator
++ # otherwise default to the standard path separator (i.e. ":") - it is
++ # assumed that no part of a normal pathname contains ";" but that should
++ # okay in the real world where ";" in dirpaths is itself problematic.
++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # Ok, now we have the path, separated by spaces, we can step through it
++ # and add multilib dir if necessary.
++ lt_tmp_lt_search_path_spec=
++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++ for lt_sys_path in $lt_search_path_spec; do
++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++ else
++ test -d "$lt_sys_path" && \
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++ fi
++ done
++ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++ lt_foo="";
++ lt_count=0;
++ for (lt_i = NF; lt_i > 0; lt_i--) {
++ if ($lt_i != "" && $lt_i != ".") {
++ if ($lt_i == "..") {
++ lt_count++;
++ } else {
++ if (lt_count == 0) {
++ lt_foo="/" $lt_i lt_foo;
++ } else {
++ lt_count--;
++ }
++ }
++ }
++ }
++ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
++}'`
++ sys_lib_search_path_spec=`echo $lt_search_path_spec`
++else
++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi])
+ need_lib_prefix=unknown
+ hardcode_into_libs=no
+
+@@ -1160,7 +1339,7 @@
+ amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+
+ beos*)
+@@ -1169,7 +1348,7 @@
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+-bsdi4*)
++bsdi[[45]]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+@@ -1185,7 +1364,7 @@
+
+ cygwin* | mingw* | pw32*)
+ version_type=windows
+- shrext=".dll"
++ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+@@ -1197,7 +1376,8 @@
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+- $install_prog $dir/$dlname \$dldir/$dlname'
++ $install_prog $dir/$dlname \$dldir/$dlname~
++ chmod a+x \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $rm \$dlpath'
+@@ -1227,7 +1407,7 @@
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+@@ -1250,13 +1430,9 @@
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
+- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+- if test "$GCC" = yes; then
+- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+- else
+- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+- fi
++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++ m4_if([$1], [],[
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+@@ -1273,20 +1449,17 @@
+ dynamic_linker=no
+ ;;
+
+-kfreebsd*-gnu*)
+- version_type=linux
+- need_lib_prefix=no
+- need_version=no
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+- soname_spec='${libname}${release}${shared_ext}$major'
+- shlibpath_var=LD_LIBRARY_PATH
+- shlibpath_overrides_runpath=no
+- hardcode_into_libs=yes
+- dynamic_linker='GNU ld.so'
+- ;;
+-
+-freebsd*)
+- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
++freebsd* | dragonfly*)
++ # DragonFly does not have aout. When/if they implement a new
++ # versioning mechanism, adjust this.
++ if test -x /usr/bin/objformat; then
++ objformat=`/usr/bin/objformat`
++ else
++ case $host_os in
++ freebsd[[123]]*) objformat=aout ;;
++ *) objformat=elf ;;
++ esac
++ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+@@ -1304,14 +1477,19 @@
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+- freebsd3.[01]* | freebsdelf3.[01]*)
++ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+- *) # from 3.2 on
++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
++ *) # from 4.6 on, and DragonFly
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
+ esac
+ ;;
+
+@@ -1331,9 +1509,9 @@
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+- case "$host_cpu" in
++ case $host_cpu in
+ ia64*)
+- shrext='.so'
++ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+@@ -1348,7 +1526,7 @@
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+- shrext='.sl'
++ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+@@ -1359,7 +1537,7 @@
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+- shrext='.sl'
++ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+@@ -1371,6 +1549,18 @@
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
++interix[[3-9]]*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++
+ irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+@@ -1414,29 +1604,26 @@
+ ;;
+
+ # This must be Linux ELF.
+-linux*)
++linux* | k*bsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+- libsuff=
+- if test "x$LINUX_64_MODE" = x64; then
+- # Some platforms are per default 64-bit, so there's no /lib64
+- if test -d /lib64 -a ! -h /lib64; then
+- libsuff=64
+- fi
+- fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
++ # Append ld.so.conf contents to the search path
++ if test -f /etc/ld.so.conf; then
++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++ fi
++
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+@@ -1446,6 +1633,18 @@
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
+ netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+@@ -1455,7 +1654,7 @@
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+@@ -1483,8 +1682,13 @@
+
+ openbsd*)
+ version_type=sunos
++ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+- need_version=no
++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++ case $host_os in
++ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++ *) need_version=no ;;
++ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+@@ -1504,7 +1708,7 @@
+
+ os2*)
+ libname_spec='$name'
+- shrext=".dll"
++ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+@@ -1522,11 +1726,8 @@
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+-sco3.2v5*)
+- version_type=osf
+- soname_spec='${libname}${release}${shared_ext}$major'
+- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+- shlibpath_var=LD_LIBRARY_PATH
++rdos*)
++ dynamic_linker=no
+ ;;
+
+ solaris*)
+@@ -1554,7 +1755,7 @@
+ need_version=yes
+ ;;
+
+-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+@@ -1587,6 +1788,29 @@
+ fi
+ ;;
+
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ version_type=freebsd-elf
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ hardcode_into_libs=yes
++ if test "$with_gnu_ld" = yes; then
++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++ shlibpath_overrides_runpath=no
++ else
++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++ shlibpath_overrides_runpath=yes
++ case $host_os in
++ sco3.2v5*)
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++ ;;
++ esac
++ fi
++ sys_lib_dlsearch_path_spec='/usr/lib'
++ ;;
++
+ uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+@@ -1600,13 +1824,19 @@
+ esac
+ AC_MSG_RESULT([$dynamic_linker])
+ test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
+ ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+ # _LT_AC_TAGCONFIG
+ # ----------------
+ AC_DEFUN([_LT_AC_TAGCONFIG],
+-[AC_ARG_WITH([tags],
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_ARG_WITH([tags],
+ [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+ [include additional configurations @<:@automatic@:>@])],
+ [tagnames="$withval"])
+@@ -1624,6 +1854,9 @@
+ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+ fi
+ fi
++ if test -z "$LTCFLAGS"; then
++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
++ fi
+
+ # Extract list of available tagged configurations in $ofile.
+ # Note that this assumes the entire list is on one line.
+@@ -1650,7 +1883,9 @@
+
+ case $tagname in
+ CXX)
+- if test -n "$CXX" && test "X$CXX" != "Xno"; then
++ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
+ AC_LIBTOOL_LANG_CXX_CONFIG
+ else
+ tagname=""
+@@ -1712,7 +1947,7 @@
+
+ # AC_LIBTOOL_WIN32_DLL
+ # --------------------
+-# declare package support for building win32 dll's
++# declare package support for building win32 DLLs
+ AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+ [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+ ])# AC_LIBTOOL_WIN32_DLL
+@@ -1750,7 +1985,7 @@
+
+ # AC_DISABLE_SHARED
+ # -----------------
+-#- set the default shared flag to --disable-shared
++# set the default shared flag to --disable-shared
+ AC_DEFUN([AC_DISABLE_SHARED],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_ENABLE_SHARED(no)
+@@ -1862,7 +2097,7 @@
+
+ # AC_PATH_TOOL_PREFIX
+ # -------------------
+-# find a file program which can recognise shared library
++# find a file program which can recognize shared library
+ AC_DEFUN([AC_PATH_TOOL_PREFIX],
+ [AC_REQUIRE([AC_PROG_EGREP])dnl
+ AC_MSG_CHECKING([for $1])
+@@ -1886,7 +2121,7 @@
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+@@ -1925,7 +2160,7 @@
+
+ # AC_PATH_MAGIC
+ # -------------
+-# find a file program which can recognise a shared library
++# find a file program which can recognize a shared library
+ AC_DEFUN([AC_PATH_MAGIC],
+ [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+ if test -z "$lt_cv_path_MAGIC_CMD"; then
+@@ -1996,7 +2231,7 @@
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+- # but apparently some GNU ld's only accept -v.
++ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+@@ -2028,7 +2263,7 @@
+ AC_DEFUN([AC_PROG_LD_GNU],
+ [AC_REQUIRE([AC_PROG_EGREP])dnl
+ AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
++[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+ case `$LD -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+@@ -2055,6 +2290,15 @@
+ *) reload_flag=" $reload_flag" ;;
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++ darwin*)
++ if test "$GCC" = yes; then
++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++ else
++ reload_cmds='$LD$reload_flag -o $output$reload_objs'
++ fi
++ ;;
++esac
+ ])# AC_PROG_LD_RELOAD_FLAG
+
+
+@@ -2063,7 +2307,7 @@
+ # how to check for library dependencies
+ # -- PORTME fill in with the dynamic library characteristics
+ AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+-[AC_CACHE_CHECK([how to recognise dependent libraries],
++[AC_CACHE_CHECK([how to recognize dependent libraries],
+ lt_cv_deplibs_check_method,
+ [lt_cv_file_magic_cmd='$MAGIC_CMD'
+ lt_cv_file_magic_test_file=
+@@ -2088,44 +2332,42 @@
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-bsdi4*)
++bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+ cygwin*)
+- lt_cv_deplibs_check_method=pass_all
++ # func_win32_libid is a shell function defined in ltmain.sh
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+-
++
+ mingw* | pw32*)
+- # win32_libid is a shell function defined in ltmain.sh
+- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+- lt_cv_file_magic_cmd='win32_libid'
++ # Base MSYS/MinGW do not provide the 'file' command needed by
++ # func_win32_libid shell function, so use a weaker test based on 'objdump',
++ # unless we find 'file', for example because we are cross-compiling.
++ if ( file / ) >/dev/null 2>&1; then
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
++ else
++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ lt_cv_file_magic_cmd='$OBJDUMP -f'
++ fi
+ ;;
+
+ darwin* | rhapsody*)
+- # this will be overwritten by pass_all, but leave it in just in case
+- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+- lt_cv_file_magic_cmd='/usr/bin/file -L'
+- case "$host_os" in
+- rhapsody* | darwin1.[[012]])
+- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
+- ;;
+- *) # Darwin 1.3 on
+- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+- ;;
+- esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-freebsd* | kfreebsd*-gnu)
++freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+@@ -2141,7 +2383,7 @@
+
+ hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+- case "$host_cpu" in
++ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+@@ -2157,43 +2399,27 @@
+ esac
+ ;;
+
++interix[[3-9]]*)
++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
++ ;;
++
+ irix5* | irix6* | nonstopux*)
+- case $host_os in
+- irix5* | nonstopux*)
+- # this will be overridden with pass_all, but let us keep it just in case
+- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+- ;;
+- *)
+- case $LD in
+- *-32|*"-32 ") libmagic=32-bit;;
+- *-n32|*"-n32 ") libmagic=N32;;
+- *-64|*"-64 ") libmagic=64-bit;;
+- *) libmagic=never-match;;
+- esac
+- # this will be overridden with pass_all, but let us keep it just in case
+- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
+- ;;
++ case $LD in
++ *-32|*"-32 ") libmagic=32-bit;;
++ *-n32|*"-n32 ") libmagic=N32;;
++ *-64|*"-64 ") libmagic=64-bit;;
++ *) libmagic=never-match;;
+ esac
+- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+ # This must be Linux ELF.
+-linux*)
+- case $host_cpu in
+- alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* )
+- lt_cv_deplibs_check_method=pass_all ;;
+- # the debian people say, arm and glibc 2.3.1 works for them with pass_all
+- arm* )
+- lt_cv_deplibs_check_method=pass_all ;;
+- *)
+- # glibc up to 2.1.1 does not perform some relocations on ARM
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+- esac
+- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
++linux* | k*bsd*-gnu)
++ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-netbsd*)
++netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+@@ -2212,32 +2438,26 @@
+ ;;
+
+ openbsd*)
+- lt_cv_file_magic_cmd=/usr/bin/file
+- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+- # this will be overridden with pass_all, but let us keep it just in case
+- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+- lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-sco3.2v5*)
++rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+ solaris*)
+ lt_cv_deplibs_check_method=pass_all
+- lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+@@ -2258,10 +2478,13 @@
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
++ pc)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
+ esac
+ ;;
+
+-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+@@ -2281,36 +2504,43 @@
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+ else
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+- IFS="$lt_save_ifs"
+- test -z "$ac_dir" && ac_dir=.
+- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
+- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+- # Check to see if the nm accepts a BSD-compat flag.
+- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+- # nm: unknown option "B" ignored
+- # Tru64's nm complains that /dev/null is an invalid object file
+- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+- */dev/null* | *'Invalid file or object type'*)
+- lt_cv_path_NM="$tmp_nm -B"
+- break
+- ;;
+- *)
+- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+- */dev/null*)
+- lt_cv_path_NM="$tmp_nm -p"
++ lt_nm_to_check="${ac_tool_prefix}nm"
++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
++ lt_nm_to_check="$lt_nm_to_check nm"
++ fi
++ for lt_tmp_nm in $lt_nm_to_check; do
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ tmp_nm="$ac_dir/$lt_tmp_nm"
++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++ # Check to see if the nm accepts a BSD-compat flag.
++ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
++ # nm: unknown option "B" ignored
++ # Tru64's nm complains that /dev/null is an invalid object file
++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++ */dev/null* | *'Invalid file or object type'*)
++ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+- continue # so that we can try to find one that supports BSD flags
++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++ */dev/null*)
++ lt_cv_path_NM="$tmp_nm -p"
++ break
++ ;;
++ *)
++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++ continue # so that we can try to find one that supports BSD flags
++ ;;
++ esac
+ ;;
+ esac
+- esac
+- fi
++ fi
++ done
++ IFS="$lt_save_ifs"
+ done
+- IFS="$lt_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ fi])
+ NM="$lt_cv_path_NM"
+@@ -2342,13 +2572,13 @@
+ # -----------------------------------
+ # sets LIBLTDL to the link flags for the libltdl convenience library and
+ # LTDLINCL to the include flags for the libltdl header and adds
+-# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
+-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
+-# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
+-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
+-# '${top_srcdir}/' (note the single quotes!). If your package is not
+-# flat and you're not using automake, define top_builddir and
+-# top_srcdir appropriately in the Makefiles.
++# --enable-ltdl-convenience to the configure arguments. Note that
++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
++# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
++# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
++# (note the single quotes!). If your package is not flat and you're not
++# using automake, define top_builddir and top_srcdir appropriately in
++# the Makefiles.
+ AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case $enable_ltdl_convenience in
+@@ -2367,13 +2597,13 @@
+ # -----------------------------------
+ # sets LIBLTDL to the link flags for the libltdl installable library and
+ # LTDLINCL to the include flags for the libltdl header and adds
+-# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
+-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
+-# DIRECTORY is not provided and an installed libltdl is not found, it is
+-# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
+-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
+-# quotes!). If your package is not flat and you're not using automake,
+-# define top_builddir and top_srcdir appropriately in the Makefiles.
++# --enable-ltdl-install to the configure arguments. Note that
++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
++# and an installed libltdl is not found, it is assumed to be `libltdl'.
++# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
++# '${top_srcdir}/' (note the single quotes!). If your package is not
++# flat and you're not using automake, define top_builddir and top_srcdir
++# appropriately in the Makefiles.
+ # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+ AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+@@ -2411,10 +2641,21 @@
+ # ---------------
+ AC_DEFUN([_LT_AC_LANG_CXX],
+ [AC_REQUIRE([AC_PROG_CXX])
+-AC_REQUIRE([AC_PROG_CXXCPP])
++AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+ _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+ ])# _LT_AC_LANG_CXX
+
++# _LT_AC_PROG_CXXCPP
++# ------------------
++AC_DEFUN([_LT_AC_PROG_CXXCPP],
++[
++AC_REQUIRE([AC_PROG_CXX])
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
++ AC_PROG_CXXCPP
++fi
++])# _LT_AC_PROG_CXXCPP
+
+ # AC_LIBTOOL_F77
+ # --------------
+@@ -2454,7 +2695,7 @@
+
+
+ # AC_LIBTOOL_RC
+-# --------------
++# -------------
+ # enable support for Windows resource files
+ AC_DEFUN([AC_LIBTOOL_RC],
+ [AC_REQUIRE([LT_AC_PROG_RC])
+@@ -2480,43 +2721,16 @@
+ _LT_AC_TAGVAR(objext, $1)=$objext
+
+ # Code to be used in simple compile tests
+-lt_simple_compile_test_code="int some_variable = 0;\n"
++lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+-lt_simple_link_test_code='int main(){return(0);}\n'
++lt_simple_link_test_code='int main(){return(0);}'
+
+ _LT_AC_SYS_COMPILER
+
+-#
+-# Check for any special shared library compilation flags.
+-#
+-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
+-if test "$GCC" = no; then
+- case $host_os in
+- sco3.2v5*)
+- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
+- ;;
+- esac
+-fi
+-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
+- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
+- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
+- else
+- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
+- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
+- fi
+-fi
+-
+-
+-#
+-# Check to make sure the static flag actually works.
+-#
+-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
+- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
+- [],
+- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+-
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+@@ -2530,9 +2744,9 @@
+ AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+ AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+ AC_LIBTOOL_SYS_LIB_STRIP
+-AC_LIBTOOL_DLOPEN_SELF($1)
++AC_LIBTOOL_DLOPEN_SELF
+
+-# Report which librarie types wil actually be built
++# Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+@@ -2541,7 +2755,7 @@
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+-case "$host_os" in
++case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+@@ -2550,48 +2764,11 @@
+ fi
+ ;;
+
+-aix4*)
++aix4* | aix5*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+- ;;
+- darwin* | rhapsody*)
+- if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- case "$host_os" in
+- rhapsody* | darwin1.[[012]])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress'
+- ;;
+- *) # Darwin 1.3 on
+- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
+- else
+- case ${MACOSX_DEPLOYMENT_TARGET} in
+- 10.[012])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
+- ;;
+- 10.*)
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup'
+- ;;
+- esac
+- fi
+- ;;
+- esac
+- output_verbose_link_cmd='echo'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
+- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
+- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+@@ -2616,7 +2793,7 @@
+ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+ [AC_LANG_PUSH(C++)
+ AC_REQUIRE([AC_PROG_CXX])
+-AC_REQUIRE([AC_PROG_CXXCPP])
++AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+@@ -2628,6 +2805,7 @@
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
++_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+ _LT_AC_TAGVAR(module_cmds, $1)=
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+@@ -2645,21 +2823,25 @@
+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+
+ # Source file extension for C++ test sources.
+-ac_ext=cc
++ac_ext=cpp
+
+ # Object file extension for compiled C++ test sources.
+ objext=o
+ _LT_AC_TAGVAR(objext, $1)=$objext
+
+ # Code to be used in simple compile tests
+-lt_simple_compile_test_code="int some_variable = 0;\n"
++lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
++lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_AC_SYS_COMPILER
+
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_LD=$LD
+@@ -2670,18 +2852,18 @@
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+- unset lt_cv_prog_gnu_ld
++ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+- unset lt_cv_path_LD
++ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ compiler=$CC
+ _LT_AC_TAGVAR(compiler, $1)=$CC
+-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
++_LT_CC_BASENAME([$compiler])
+
+ # We don't want -fno-exception wen compiling C++ code, so set the
+ # no_builtin_flag separately
+@@ -2699,8 +2881,8 @@
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -2726,7 +2908,7 @@
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+@@ -2756,14 +2938,29 @@
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+- # KDE requires run time linking. Make it the default.
+- aix_use_runtimelinking=yes
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
++ aix_use_runtimelinking=no
+
+- # When large executables or shared objects are built, AIX ld can
+- # have problems creating the table of contents. If linking a library
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
++ for ld_flag in $LDFLAGS; do
++ case $ld_flag in
++ *-brtl*)
++ aix_use_runtimelinking=yes
++ break
++ ;;
++ esac
++ done
++ ;;
++ esac
++
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
++
++ # When large executables or shared objects are built, AIX ld can
++ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+@@ -2774,7 +2971,7 @@
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+ if test "$GXX" = yes; then
+- case $host_os in aix4.[012]|aix4.[012].*)
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+@@ -2782,7 +2979,7 @@
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ :
+ else
+ # We have old collect2
+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+@@ -2793,8 +2990,12 @@
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
++ ;;
+ esac
+ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+@@ -2803,15 +3004,16 @@
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='-qmkshrobj ${wl}-G'
++ shared_flag='${wl}-G'
+ else
+- shared_flag='-qmkshrobj'
++ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+- # Let the compiler handle the export list.
+- _LT_AC_TAGVAR(always_export_symbols, $1)=no
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+@@ -2820,13 +3022,12 @@
+ _LT_AC_SYS_LIBPATH_AIX
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+@@ -2835,16 +3036,26 @@
+ # -berok will link without error, but may produce a broken library.
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # -bexpall does not export symbols beginning with underscore (_)
+- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ # Exported symbols can be pulled into shared objects from archives
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds it's shared libraries.
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ # This is similar to how AIX traditionally builds its shared libraries.
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
++
++ beos*)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
++ # support --undefined. This deserves some investigation. FIXME
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
+ chorus*)
+ case $cc_basename in
+ *)
+@@ -2858,12 +3069,12 @@
+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=no
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+@@ -2872,70 +3083,81 @@
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
++ darwin* | rhapsody*)
++ case $host_os in
++ rhapsody* | darwin1.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
++ ;;
++ *) # Darwin 1.3 on
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
++ ;;
++ esac
++ fi
++ ;;
++ esac
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+- darwin* | rhapsody*)
+- if test "$GXX" = yes; then
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- case "$host_os" in
+- rhapsody* | darwin1.[[012]])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress'
+- ;;
+- *) # Darwin 1.3 on
+- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
++ if test "$GXX" = yes ; then
++ lt_int_apple_cc_single_mod=no
++ output_verbose_link_cmd='echo'
++ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
++ lt_int_apple_cc_single_mod=yes
++ fi
++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ else
+- case ${MACOSX_DEPLOYMENT_TARGET} in
+- 10.[012])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
+- ;;
+- 10.*)
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup'
+- ;;
+- esac
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++ fi
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ else
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ fi
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ else
++ case $cc_basename in
++ xlc*)
++ output_verbose_link_cmd='echo'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ ;;
++ *)
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
+ fi
+- ;;
+- esac
+- lt_int_apple_cc_single_mod=no
+- output_verbose_link_cmd='echo'
+- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
+- lt_int_apple_cc_single_mod=yes
+- fi
+- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring'
+- fi
+- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
+-
+- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- else
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- fi
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ ;;
+
+ dgux*)
+ case $cc_basename in
+- ec++)
++ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- ghcx)
++ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+@@ -2946,14 +3168,14 @@
+ ;;
+ esac
+ ;;
+- freebsd[12]*)
++ freebsd[[12]]*)
+ # C++ shared libraries reported to be fairly broken before switch to ELF
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ freebsd-elf*)
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+- freebsd* | kfreebsd*-gnu)
++ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+@@ -2970,12 +3192,12 @@
+ # location of the library.
+
+ case $cc_basename in
+- CC)
++ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- aCC)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ aCC*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+@@ -2984,11 +3206,11 @@
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+@@ -2998,33 +3220,20 @@
+ ;;
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+- case "$host_cpu" in
+- hppa*64*)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+- ;;
+- ia64*)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- ;;
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ case $host_cpu in
++ hppa*64*|ia64*) ;;
+ *)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+- case "$host_cpu" in
+- hppa*64*)
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- ;;
+- ia64*)
++ case $host_cpu in
++ hppa*64*|ia64*)
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+- # but as the default
+- # location of the library.
+ ;;
+ *)
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+@@ -3035,17 +3244,20 @@
+ esac
+
+ case $cc_basename in
+- CC)
++ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- aCC)
+- case "$host_cpu" in
+- hppa*64*|ia64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
++ aCC*)
++ case $host_cpu in
++ hppa*64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ ia64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+@@ -3061,12 +3273,15 @@
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+- case "$host_cpu" in
+- ia64*|hppa*64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
++ case $host_cpu in
++ hppa*64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ ia64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+@@ -3077,11 +3292,25 @@
+ ;;
+ esac
+ ;;
++ interix[[3-9]]*)
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+- CC)
++ CC*)
+ # SGI C++
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+@@ -3092,9 +3321,9 @@
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+ fi
+ fi
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+@@ -3103,16 +3332,16 @@
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+- linux*)
++ linux* | k*bsd*-gnu)
+ case $cc_basename in
+- KCC)
++ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+@@ -3130,20 +3359,44 @@
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+- icpc)
++ icpc*)
+ # Intel C++
+ with_gnu_ld=yes
++ # version 8.0 and above of icpc choke on multiply defined symbols
++ # if we add $predep_objects and $postdep_objects, however 7.1 and
++ # earlier do not add the objects themselves.
++ case `$CC -V 2>&1` in
++ *"Version 7."*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ ;;
++ *) # Version 8.0 or newer
++ tmp_idyn=
++ case $host_cpu in
++ ia64*) tmp_idyn=' -i_dynamic';;
++ esac
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ ;;
++ esac
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+- cxx)
++ pgCC*)
++ # Portland Group C++ compiler
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++ ;;
++ cxx*)
+ # Compaq C++
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -3159,6 +3412,29 @@
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++
++ # Not sure whether something based on
++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
++ # would be better.
++ output_verbose_link_cmd='echo'
++
++ # Archives containing C++ object files must be created using
++ # "CC -xar", where "CC" is the Sun C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++ ;;
++ esac
++ ;;
+ esac
+ ;;
+ lynxos*)
+@@ -3171,7 +3447,7 @@
+ ;;
+ mvs*)
+ case $cc_basename in
+- cxx)
++ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+@@ -3181,7 +3457,7 @@
+ ;;
+ esac
+ ;;
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+@@ -3192,15 +3468,35 @@
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
++ openbsd2*)
++ # C++ shared libraries are fairly broken
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ fi
++ output_verbose_link_cmd='echo'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
+ osf3*)
+ case $cc_basename in
+- KCC)
++ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3210,14 +3506,14 @@
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+
+ ;;
+- RCC)
++ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- cxx)
++ cxx*)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3235,7 +3531,7 @@
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3254,13 +3550,13 @@
+ ;;
+ osf4* | osf5*)
+ case $cc_basename in
+- KCC)
++ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3269,17 +3565,17 @@
+ # the KAI C++ compiler.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+ ;;
+- RCC)
++ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- cxx)
++ cxx*)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+- $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+ $rm $lib.exp'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -3298,7 +3594,7 @@
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+@@ -3319,27 +3615,14 @@
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- sco*)
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- case $cc_basename in
+- CC)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- *)
+- # FIXME: insert proper C++ library support
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- ;;
+- esac
+- ;;
+ sunos4*)
+ case $cc_basename in
+- CC)
++ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+- lcc)
++ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+@@ -3352,36 +3635,28 @@
+ ;;
+ solaris*)
+ case $cc_basename in
+- CC)
++ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
++ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+- solaris2.[0-5] | solaris2.[0-5].*) ;;
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+- # The C++ compiler is used as linker so we must use $wl
+- # flag to pass the commands to the underlying system
+- # linker.
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+- # Commands to make compiler produce verbose output that lists
+- # what "hidden" libraries, object files and flags are used when
+- # linking a shared library.
+- #
+- # There doesn't appear to be a way to prevent this compiler from
+- # explicitly linking system object files so we need to strip them
+- # from the output so that they don't get included in the library
+- # dependencies.
+- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+@@ -3389,9 +3664,9 @@
+ # in the archive.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+- gcx)
++ gcx*)
+ # Green Hills C++ Compiler
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+@@ -3401,9 +3676,9 @@
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | grep -v '^2\.7' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+@@ -3412,9 +3687,9 @@
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+@@ -3423,16 +3698,73 @@
+ fi
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ ;;
++ esac
+ fi
+ ;;
+ esac
+ ;;
+- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var='LD_RUN_PATH'
++
++ case $cc_basename in
++ CC*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ ;;
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ # For security reasons, it is highly recommended that you always
++ # use absolute paths for naming shared libraries, and exclude the
++ # DT_RUNPATH tag from executables and libraries. But doing so
++ # requires that you compile everything twice, which is a pain.
++ # So that behaviour is only enabled if SCOABSPATH is set to a
++ # non-empty value in the environment. Most likely only useful for
++ # creating official distributions of packages.
++ # This is a hack until libtool officially supports absolute path
++ # names for shared libraries.
++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++ runpath_var='LD_RUN_PATH'
++
++ case $cc_basename in
++ CC*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+- NCC)
++ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+@@ -3469,8 +3801,6 @@
+ AC_LIBTOOL_PROG_LD_SHLIBS($1)
+ AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+ AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+-AC_LIBTOOL_SYS_LIB_STRIP
+-AC_LIBTOOL_DLOPEN_SELF($1)
+
+ AC_LIBTOOL_CONFIG($1)
+
+@@ -3488,7 +3818,7 @@
+ ])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+ # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+-# ------------------------
++# ------------------------------------
+ # Figure out "hidden" library dependencies from verbose
+ # compiler output when linking a shared library.
+ # Parse the compiler output and extract the necessary
+@@ -3542,7 +3872,7 @@
+ # The `*' in the case matches for architectures that use `case' in
+ # $output_verbose_cmd can trigger glob expansion during the loop
+ # eval without this substitution.
+- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
++ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+ for p in `eval $output_verbose_link_cmd`; do
+ case $p in
+@@ -3582,7 +3912,7 @@
+ fi
+ ;;
+
+- *.$objext|*.$libext)
++ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+@@ -3618,13 +3948,70 @@
+
+ $rm -f confest.$objext
+
++# PORTME: override above test on systems where it is broken
++ifelse([$1],[CXX],
++[case $host_os in
++interix[[3-9]]*)
++ # Interix 3.5 installs completely hosed .la files for C++, so rather than
++ # hack all around it, let's just trust "g++" to DTRT.
++ _LT_AC_TAGVAR(predep_objects,$1)=
++ _LT_AC_TAGVAR(postdep_objects,$1)=
++ _LT_AC_TAGVAR(postdeps,$1)=
++ ;;
++
++linux*)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++ #
++ # The more standards-conforming stlport4 library is
++ # incompatible with the Cstd library. Avoid specifying
++ # it if it's in CXXFLAGS. Ignore libCrun as
++ # -library=stlport4 depends on it.
++ case " $CXX $CXXFLAGS " in
++ *" -library=stlport4 "*)
++ solaris_use_stlport4=yes
++ ;;
++ esac
++ if test "$solaris_use_stlport4" != yes; then
++ _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++ fi
++ ;;
++ esac
++ ;;
++
++solaris*)
++ case $cc_basename in
++ CC*)
++ # The more standards-conforming stlport4 library is
++ # incompatible with the Cstd library. Avoid specifying
++ # it if it's in CXXFLAGS. Ignore libCrun as
++ # -library=stlport4 depends on it.
++ case " $CXX $CXXFLAGS " in
++ *" -library=stlport4 "*)
++ solaris_use_stlport4=yes
++ ;;
++ esac
++
++ # Adding this requires a known-good setup of shared libraries for
++ # Sun compiler versions before 5.6, else PIC objects from an old
++ # archive will be linked into the output, leading to subtle bugs.
++ if test "$solaris_use_stlport4" != yes; then
++ _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++ fi
++ ;;
++ esac
++ ;;
++esac
++])
++
+ case " $_LT_AC_TAGVAR(postdeps, $1) " in
+ *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+ esac
+ ])# AC_LIBTOOL_POSTDEP_PREDEP
+
+ # AC_LIBTOOL_LANG_F77_CONFIG
+-# ------------------------
++# --------------------------
+ # Ensure that the configuration vars for the C compiler are
+ # suitably defined. Those variables are subsequently used by
+ # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+@@ -3660,20 +4047,31 @@
+ _LT_AC_TAGVAR(objext, $1)=$objext
+
+ # Code to be used in simple compile tests
+-lt_simple_compile_test_code=" subroutine t\n return\n end\n"
++lt_simple_compile_test_code="\
++ subroutine t
++ return
++ end
++"
+
+ # Code to be used in simple link tests
+-lt_simple_link_test_code=" program t\n end\n"
++lt_simple_link_test_code="\
++ program t
++ end
++"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_AC_SYS_COMPILER
+
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ CC=${F77-"f77"}
+ compiler=$CC
+ _LT_AC_TAGVAR(compiler, $1)=$CC
+-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
++_LT_CC_BASENAME([$compiler])
+
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+@@ -3683,7 +4081,7 @@
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+-case "$host_os" in
++case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+@@ -3691,8 +4089,10 @@
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+-aix4*)
+- test "$enable_shared" = yes && enable_static=no
++aix4* | aix5*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+@@ -3702,8 +4102,6 @@
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+-
+ _LT_AC_TAGVAR(GCC, $1)="$G77"
+ _LT_AC_TAGVAR(LD, $1)="$LD"
+
+@@ -3713,8 +4111,6 @@
+ AC_LIBTOOL_PROG_LD_SHLIBS($1)
+ AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+ AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+-AC_LIBTOOL_SYS_LIB_STRIP
+-
+
+ AC_LIBTOOL_CONFIG($1)
+
+@@ -3740,23 +4136,30 @@
+ _LT_AC_TAGVAR(objext, $1)=$objext
+
+ # Code to be used in simple compile tests
+-lt_simple_compile_test_code="class foo {}\n"
++lt_simple_compile_test_code="class foo {}"
+
+ # Code to be used in simple link tests
+-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_AC_SYS_COMPILER
+
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ CC=${GCJ-"gcj"}
+ compiler=$CC
+ _LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
+
+ # GCJ did not exist at the time GCC didn't implicitly link libc in.
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+@@ -3768,8 +4171,6 @@
+ AC_LIBTOOL_PROG_LD_SHLIBS($1)
+ AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+ AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+-AC_LIBTOOL_SYS_LIB_STRIP
+-AC_LIBTOOL_DLOPEN_SELF($1)
+
+ AC_LIBTOOL_CONFIG($1)
+
+@@ -3779,7 +4180,7 @@
+
+
+ # AC_LIBTOOL_LANG_RC_CONFIG
+-# --------------------------
++# -------------------------
+ # Ensure that the configuration vars for the Windows resource compiler are
+ # suitably defined. Those variables are subsequently used by
+ # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+@@ -3795,7 +4196,7 @@
+ _LT_AC_TAGVAR(objext, $1)=$objext
+
+ # Code to be used in simple compile tests
+-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="$lt_simple_compile_test_code"
+@@ -3803,11 +4204,16 @@
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_AC_SYS_COMPILER
+
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ CC=${RC-"windres"}
+ compiler=$CC
+ _LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+ AC_LIBTOOL_CONFIG($1)
+@@ -3833,11 +4239,12 @@
+ # without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+- fi
++ fi
+ # Now quote all the things that may contain metacharacters while being
+ # careful not to overquote the AC_SUBSTed values. We take copies of the
+ # variables and quote the copies for generation of the libtool script.
+- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
++ SED SHELL STRIP \
+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+ deplibs_check_method reload_flag reload_cmds need_locks \
+@@ -3878,6 +4285,7 @@
+ _LT_AC_TAGVAR(module_cmds, $1) \
+ _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
++ _LT_AC_TAGVAR(fix_srcfile_path, $1) \
+ _LT_AC_TAGVAR(exclude_expsyms, $1) \
+ _LT_AC_TAGVAR(include_expsyms, $1); do
+
+@@ -3887,7 +4295,7 @@
+ _LT_AC_TAGVAR(archive_cmds, $1) | \
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+ _LT_AC_TAGVAR(module_cmds, $1) | \
+- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
++ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
+@@ -3924,7 +4332,7 @@
+ # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+ # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+ #
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ # Free Software Foundation, Inc.
+ #
+ # This file is part of GNU Libtool:
+@@ -3953,11 +4361,11 @@
+ SED=$lt_SED
+
+ # Sed that helps us avoid accidentally triggering echo(1) options like -n.
+-Xsed="$SED -e s/^X//"
++Xsed="$SED -e 1s/^X//"
+
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+ # The names of the tagged configurations supported by this script.
+ available_tags=
+@@ -3988,6 +4396,12 @@
+ # The host system.
+ host_alias=$host_alias
+ host=$host
++host_os=$host_os
++
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
+
+ # An echo program that does not interpret backslashes.
+ echo=$lt_echo
+@@ -3999,6 +4413,9 @@
+ # A C compiler.
+ LTCC=$lt_LTCC
+
++# LTCC compiler flags.
++LTCFLAGS=$lt_LTCFLAGS
++
+ # A language-specific compiler.
+ CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+
+@@ -4018,7 +4435,7 @@
+ NM=$lt_NM
+
+ # A symbol stripping program
+-STRIP=$STRIP
++STRIP=$lt_STRIP
+
+ # Used to examine libraries when file_magic_cmd begins "file"
+ MAGIC_CMD=$MAGIC_CMD
+@@ -4049,7 +4466,7 @@
+ libext="$libext"
+
+ # Shared library suffix (normally ".so").
+-shrext='$shrext'
++shrext_cmds='$shrext_cmds'
+
+ # Executable file suffix (normally "").
+ exeext="$exeext"
+@@ -4064,7 +4481,7 @@
+ # Does compiler simultaneously support -c and -o options?
+ compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+
+-# Must we lock files when doing compilation ?
++# Must we lock files when doing compilation?
+ need_locks=$lt_need_locks
+
+ # Do we need the lib prefix for modules?
+@@ -4240,7 +4657,7 @@
+ sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+ # Fix the shell variable \$srcfile for the compiler.
+-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
++fix_srcfile_path=$lt_fix_srcfile_path
+
+ # Set to yes if exported symbols are required.
+ always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+@@ -4293,7 +4710,10 @@
+ # If there is no Makefile yet, we rely on a make rule to execute
+ # `config.status --recheck' to rerun these tests and create the
+ # libtool script then.
+- test -f Makefile && make "$ltmain"
++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
++ if test -f "$ltmain_in"; then
++ test -f Makefile && make "$ltmain"
++ fi
+ fi
+ ])# AC_LIBTOOL_CONFIG
+
+@@ -4320,6 +4740,7 @@
+ # ---------------------------------
+ AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+ [AC_REQUIRE([AC_CANONICAL_HOST])
++AC_REQUIRE([LT_AC_PROG_SED])
+ AC_REQUIRE([AC_PROG_NM])
+ AC_REQUIRE([AC_OBJEXT])
+ # Check for command to grab the raw symbol name followed by C symbol from nm.
+@@ -4335,9 +4756,6 @@
+ # Regexp to match symbols that can be accessed directly from C.
+ sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+-# Transform the above into a raw symbol and a C symbol.
+-symxfrm='\1 \2\3 \3'
+-
+ # Transform an extracted symbol line into a proper C declaration
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+@@ -4359,14 +4777,30 @@
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+ ;;
++linux* | k*bsd*-gnu)
++ if test "$host_cpu" = ia64; then
++ symcode='[[ABCDGIRSTW]]'
++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
++ fi
++ ;;
+ irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+ osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+-solaris* | sysv5*)
+- symcode='[[BDT]]'
++solaris*)
++ symcode='[[BDRT]]'
++ ;;
++sco3.2v5*)
++ symcode='[[DT]]'
++ ;;
++sysv4.2uw2*)
++ symcode='[[DT]]'
++ ;;
++sysv5* | sco5v6* | unixware* | OpenUNIX*)
++ symcode='[[ABDT]]'
+ ;;
+ sysv4)
+ symcode='[[DFNSTU]]'
+@@ -4384,14 +4818,17 @@
+ # If we're using GNU nm, then use its standard symbol codes.
+ case `$NM -V 2>&1` in
+ *GNU* | *'with BFD'*)
+- symcode='[[ABCDGISTW]]' ;;
++ symcode='[[ABCDGIRSTW]]' ;;
+ esac
+
+ # Try without a prefix undercore, then with it.
+ for ac_symprfx in "" "_"; do
+
++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
++ symxfrm="\\1 $ac_symprfx\\2 \\2"
++
+ # Write the raw and C identifiers.
+- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -4530,12 +4967,14 @@
+ # like `-m68040'.
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+- mingw* | os2* | pw32*)
++ mingw* | cygwin* | os2* | pw32*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
++ # Although the cygwin gcc ignores -fPIC, still need this for old-style
++ # (--disable-auto-import) libraries
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+ ;;
+ darwin* | rhapsody*)
+@@ -4547,6 +4986,10 @@
+ # DJGPP does not support shared libraries at all
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
++ interix[[3-9]]*)
++ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++ # Instead, we relocate shared libraries at runtime.
++ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+@@ -4555,7 +4998,7 @@
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+- case "$host_cpu" in
++ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+@@ -4580,18 +5023,28 @@
+ ;;
+ chorus*)
+ case $cc_basename in
+- cxch68)
++ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
++ darwin*)
++ # PIC is the default on this platform
++ # Common symbols not allowed in MH_DYLIB files
++ case $cc_basename in
++ xlc*)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ ;;
++ esac
++ ;;
+ dgux*)
+ case $cc_basename in
+- ec++)
++ ec++*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+- ghcx)
++ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+@@ -4599,22 +5052,22 @@
+ ;;
+ esac
+ ;;
+- freebsd* | kfreebsd*-gnu)
++ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+- CC)
++ CC*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+- aCC)
++ aCC*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+- case "$host_cpu" in
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+@@ -4627,9 +5080,13 @@
+ ;;
+ esac
+ ;;
++ interix*)
++ # This is c89, which is MS Visual C++ (no shared libs)
++ # Anyone wants to do a port?
++ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+- CC)
++ CC*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+@@ -4638,20 +5095,26 @@
+ ;;
+ esac
+ ;;
+- linux*)
++ linux* | k*bsd*-gnu)
+ case $cc_basename in
+- KCC)
++ KCC*)
+ # KAI C++ Compiler
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+- icpc)
++ icpc* | ecpc*)
+ # Intel C++
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+- ;;
+- cxx)
++ ;;
++ pgCC*)
++ # Portland Group C++ compiler.
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+@@ -4659,6 +5122,14 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++ ;;
++ esac
+ ;;
+ esac
+ ;;
+@@ -4668,25 +5139,25 @@
+ ;;
+ mvs*)
+ case $cc_basename in
+- cxx)
++ cxx*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+- KCC)
++ KCC*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+- RCC)
++ RCC*)
+ # Rational C++ 2.4.1
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+- cxx)
++ cxx*)
+ # Digital/Compaq C++
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+@@ -4700,24 +5171,15 @@
+ ;;
+ psos*)
+ ;;
+- sco*)
+- case $cc_basename in
+- CC)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+- ;;
+- *)
+- ;;
+- esac
+- ;;
+ solaris*)
+ case $cc_basename in
+- CC)
++ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+- gcx)
++ gcx*)
+ # Green Hills C++ Compiler
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+@@ -4727,12 +5189,12 @@
+ ;;
+ sunos4*)
+ case $cc_basename in
+- CC)
++ CC*)
+ # Sun C++ 4.x
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+- lcc)
++ lcc*)
+ # Lucid
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+@@ -4742,7 +5204,7 @@
+ ;;
+ tandem*)
+ case $cc_basename in
+- NCC)
++ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+@@ -4750,7 +5212,14 @@
+ ;;
+ esac
+ ;;
+- unixware*)
++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++ case $cc_basename in
++ CC*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ esac
+ ;;
+ vxworks*)
+ ;;
+@@ -4781,13 +5250,15 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+
+- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+- mingw* | pw32* | os2*)
++ mingw* | cygwin* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
++ # Although the cygwin gcc ignores -fPIC, still need this for old-style
++ # (--disable-auto-import) libraries
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+ ;;
+
+@@ -4797,6 +5268,11 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
++ interix[[3-9]]*)
++ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++ # Instead, we relocate shared libraries at runtime.
++ ;;
++
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+@@ -4813,7 +5289,7 @@
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+- case "$host_cpu" in
++ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+@@ -4839,8 +5315,18 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
++ darwin*)
++ # PIC is the default on this platform
++ # Common symbols not allowed in MH_DYLIB files
++ case $cc_basename in
++ xlc*)
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ ;;
++ esac
++ ;;
+
+- mingw* | pw32* | os2*)
++ mingw* | cygwin* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+@@ -4850,7 +5336,7 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+- case "$host_cpu" in
++ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+@@ -4873,18 +5359,41 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+- linux*)
+- case $CC in
++ linux* | k*bsd*-gnu)
++ case $cc_basename in
+ icc* | ecc*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
++ pgcc* | pgf77* | pgf90* | pgf95*)
++ # Portland Group compilers (*not* the Pentium gcc compiler,
++ # which looks to be a dead project)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
+ ccc*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C 5.9
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ ;;
++ *Sun\ F*)
++ # Sun Fortran 8.3 passes all unrecognized flags to the linker
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
++ ;;
++ esac
++ ;;
+ esac
+ ;;
+
+@@ -4894,15 +5403,19 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+- sco3.2v5*)
+- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
+- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
++ rdos*)
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ case $cc_basename in
++ f77* | f90* | f95*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
++ *)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
++ esac
+ ;;
+
+ sunos4*)
+@@ -4911,7 +5424,7 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+@@ -4924,6 +5437,17 @@
+ fi
+ ;;
+
++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ unicos*)
++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ ;;
++
+ uts4*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+@@ -4951,7 +5475,7 @@
+ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+ fi
+-case "$host_os" in
++case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+@@ -4960,6 +5484,16 @@
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+ ;;
+ esac
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
++AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
++ _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
++ $lt_tmp_static_flag,
++ [],
++ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+ ])
+
+
+@@ -4967,7 +5501,8 @@
+ # ------------------------------------
+ # See if the linker supports building shared libraries.
+ AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++[AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ ifelse([$1],[CXX],[
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ case $host_os in
+@@ -4984,7 +5519,10 @@
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw*)
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ ;;
++ linux* | k*bsd*-gnu)
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+ ;;
+ *)
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+@@ -5010,7 +5548,7 @@
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+ _LT_AC_TAGVAR(module_cmds, $1)=
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ # include_expsyms should be a list of space-separated symbols to be *always*
+@@ -5027,7 +5565,8 @@
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ extract_expsyms_cmds=
+-
++ # Just being paranoid about ensuring that cc_basename is set.
++ _LT_CC_BASENAME([$compiler])
+ case $host_os in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+@@ -5037,6 +5576,10 @@
+ with_gnu_ld=no
+ fi
+ ;;
++ interix*)
++ # we just hope/assume this is gcc and not c89 (= MSVC++)
++ with_gnu_ld=yes
++ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+@@ -5047,6 +5590,27 @@
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
++ # Set some defaults for GNU ld with shared library support. These
++ # are reset later if shared libraries are not supported. Putting them
++ # here allows them to be overridden if necessary.
++ runpath_var=LD_RUN_PATH
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ # ancient GNU ld didn't support --whole-archive et. al.
++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ else
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
++ supports_anon_versioning=no
++ case `$LD -v 2>/dev/null` in
++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++ *\ 2.11.*) ;; # other 2.11 versions
++ *) supports_anon_versioning=yes ;;
++ esac
++
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix3* | aix4* | aix5*)
+@@ -5084,7 +5648,7 @@
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -5094,13 +5658,13 @@
+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=no
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+@@ -5109,23 +5673,79 @@
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+- $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ interix[[3-9]]*)
++ _LT_AC_TAGVAR(hardcode_direct, $1)=no
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
++
++ gnu* | linux* | k*bsd*-gnu)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ tmp_addflag=
++ case $cc_basename,$host_cpu in
++ pgcc*) # Portland Group C compiler
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag'
++ ;;
++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag -Mnomain' ;;
++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
++ tmp_addflag=' -i_dynamic' ;;
++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
++ tmp_addflag=' -i_dynamic -nofor_main' ;;
++ ifc* | ifort*) # Intel Fortran compiler
++ tmp_addflag=' -nofor_main' ;;
++ esac
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*) # Sun C 5.9
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_sharedflag='-G' ;;
++ *Sun\ F*) # Sun Fortran 8.3
++ tmp_sharedflag='-G' ;;
++ *)
++ tmp_sharedflag='-shared' ;;
++ esac
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++ if test $supports_anon_versioning = yes; then
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ $echo "local: *; };" >> $output_objdir/$libname.ver~
++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++ fi
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+ else
+- ld_shlibs=no
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+- solaris* | sysv5*)
++ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ cat <<EOF 1>&2
+@@ -5139,13 +5759,40 @@
+
+ EOF
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++ case `$LD -v 2>&1` in
++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++ ;;
++ *)
++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
++ else
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++
+ sunos4*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+@@ -5155,24 +5802,19 @@
+
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
+- runpath_var=LD_RUN_PATH
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+- # ancient GNU ld didn't support --whole-archive et. al.
+- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+- else
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+- fi
++ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
++ runpath_var=
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+@@ -5184,7 +5826,7 @@
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- if test "$GCC" = yes && test -z "$link_static_flag"; then
++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+@@ -5206,9 +5848,21 @@
+ else
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ fi
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
++ for ld_flag in $LDFLAGS; do
++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++ aix_use_runtimelinking=yes
++ break
++ fi
++ done
++ ;;
++ esac
+
+- # KDE requires run time linking. Make it the default.
+- aix_use_runtimelinking=yes
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+@@ -5225,7 +5879,7 @@
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+ if test "$GCC" = yes; then
+- case $host_os in aix4.[012]|aix4.[012].*)
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+@@ -5233,7 +5887,7 @@
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ :
+ else
+ # We have old collect2
+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+@@ -5244,8 +5898,12 @@
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
++ ;;
+ esac
+ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+@@ -5253,30 +5911,30 @@
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+- if test "$aix_use_runtimelinking" = yes; then
+- shared_flag='-qmkshrobj ${wl}-G'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
+ else
+- shared_flag='-qmkshrobj'
+- fi
++ shared_flag='${wl}-bM:SRE'
++ fi
+ fi
+ fi
+
+- # Let the compiler handle the export list.
+- _LT_AC_TAGVAR(always_export_symbols, $1)=no
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty executable.
+- _LT_AC_SYS_LIBPATH_AIX
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ _LT_AC_SYS_LIBPATH_AIX
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+@@ -5285,13 +5943,11 @@
+ # -berok will link without error, but may produce a broken library.
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+- # -bexpall does not export symbols beginning with underscore (_)
+- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ # Exported symbols can be pulled into shared objects from archives
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+- # This is similar to how AIX traditionally builds it's shared libraries.
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ # This is similar to how AIX traditionally builds its shared libraries.
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+@@ -5304,7 +5960,7 @@
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+- bsdi4*)
++ bsdi[[45]]*)
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+@@ -5314,69 +5970,69 @@
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)=no
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+- shrext=".dll"
++ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
+- fix_srcfile_path='`cygpath -w "$srcfile"`'
++ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ darwin* | rhapsody*)
+- if test "$GXX" = yes ; then
+- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+- case "$host_os" in
+- rhapsody* | darwin1.[[012]])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress'
+- ;;
+- *) # Darwin 1.3 on
+- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
+- else
+- case ${MACOSX_DEPLOYMENT_TARGET} in
+- 10.[012])
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
+- ;;
+- 10.*)
+- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup'
+- ;;
+- esac
+- fi
+- ;;
++ case $host_os in
++ rhapsody* | darwin1.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
++ ;;
++ *) # Darwin 1.3 on
++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++ else
++ case ${MACOSX_DEPLOYMENT_TARGET} in
++ 10.[[012]])
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++ ;;
++ 10.*)
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
++ ;;
++ esac
++ fi
++ ;;
+ esac
+- lt_int_apple_cc_single_mod=no
+- output_verbose_link_cmd='echo'
+- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
+- lt_int_apple_cc_single_mod=yes
+- fi
+- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
+- else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring'
+- fi
+- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
+- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- else
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+- fi
+- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+- else
+- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+- fi
++ if test "$GCC" = yes ; then
++ output_verbose_link_cmd='echo'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ else
++ case $cc_basename in
++ xlc*)
++ output_verbose_link_cmd='echo'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ ;;
++ *)
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ fi
+ ;;
+
+ dgux*)
+@@ -5409,8 +6065,8 @@
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+- freebsd* | kfreebsd*-gnu)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $compiler_flags $libobjs $deplibs'
++ freebsd* | dragonfly*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -5418,7 +6074,7 @@
+
+ hpux9*)
+ if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -5432,47 +6088,62 @@
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+- hpux10* | hpux11*)
++ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+- case "$host_cpu" in
+- hppa*64*|ia64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++ fi
++ if test "$with_gnu_ld" = no; then
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++ fi
++ ;;
++
++ hpux11*)
++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++ case $host_cpu in
++ hppa*64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+- case "$host_cpu" in
+- hppa*64*|ia64*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
++ case $host_cpu in
++ hppa*64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+- case "$host_cpu" in
+- hppa*64*)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ case $host_cpu in
++ hppa*64*|ia64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+- ia64*)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+-
+- # hardcode_minus_L: Not really in the search PATH,
+- # but as the default location of the library.
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+- ;;
+ *)
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+@@ -5486,7 +6157,7 @@
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+@@ -5496,7 +6167,7 @@
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+- netbsd*)
++ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+@@ -5516,23 +6187,28 @@
+ ;;
+
+ openbsd*)
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ if test -f /usr/libexec/ld.so; then
++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ else
++ case $host_os in
++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ ;;
++ *)
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ ;;
++ esac
++ fi
+ else
+- case $host_os in
+- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+- ;;
+- *)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+- ;;
+- esac
++ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+@@ -5540,14 +6216,14 @@
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+@@ -5559,13 +6235,13 @@
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+@@ -5573,21 +6249,15 @@
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+- sco3.2v5*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+- runpath_var=LD_RUN_PATH
+- hardcode_runpath_var=yes
+- ;;
+-
+ solaris*)
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+ if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
++ wlarc='${wl}'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp'
++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+ else
++ wlarc=''
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+@@ -5596,8 +6266,17 @@
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
++ *)
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'. GCC discards it without `$wl',
++ # but is careful enough not to reorder.
++ # Supported since Solaris 2.6 (maybe 2.5.1?)
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ else
++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++ fi
++ ;;
+ esac
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+@@ -5606,7 +6285,7 @@
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -5654,36 +6333,45 @@
+ fi
+ ;;
+
+- sysv4.2uw2*)
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+- hardcode_runpath_var=yes
+- runpath_var=LD_RUN_PATH
+- ;;
++ runpath_var='LD_RUN_PATH'
+
+- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
+ if test "$GCC" = yes; then
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+- runpath_var='LD_RUN_PATH'
+- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+- sysv5*)
+- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+- # $CC -shared without GNU ld will not create a library from C++
+- # object files and a static libstdc++, better avoid it by now
+- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
++
++ if test "$GCC" = yes; then
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ fi
+ ;;
+
+ uts4*)
+@@ -5701,11 +6389,6 @@
+ AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+-if test "$GCC" = yes; then
+- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+-fi
+-
+ #
+ # Do we need to explicitly link libc?
+ #
+@@ -5725,14 +6408,15 @@
+ # to ld, don't add -lc before -lgcc.
+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+ $rm conftest*
+- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+-
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
++ pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+@@ -5827,6 +6511,30 @@
+ [AC_CHECK_TOOL(RC, windres, no)
+ ])
+
++
++# Cheap backport of AS_EXECUTABLE_P and required macros
++# from Autoconf 2.59; we should not use $as_executable_p directly.
++
++# _AS_TEST_PREPARE
++# ----------------
++m4_ifndef([_AS_TEST_PREPARE],
++[m4_defun([_AS_TEST_PREPARE],
++[if test -x / >/dev/null 2>&1; then
++ as_executable_p='test -x'
++else
++ as_executable_p='test -f'
++fi
++])])# _AS_TEST_PREPARE
++
++# AS_EXECUTABLE_P
++# ---------------
++# Check whether a file is executable.
++m4_ifndef([AS_EXECUTABLE_P],
++[m4_defun([AS_EXECUTABLE_P],
++[AS_REQUIRE([_AS_TEST_PREPARE])dnl
++$as_executable_p $1[]dnl
++])])# AS_EXECUTABLE_P
++
+ ############################################################
+ # NOTE: This macro has been submitted for inclusion into #
+ # GNU Autoconf as AC_PROG_SED. When it is available in #
+@@ -5849,18 +6557,19 @@
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
++ if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+ done
++IFS=$as_save_IFS
+ lt_ac_max=0
+ lt_ac_count=0
+ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+ # along with /bin/sed that truncates output.
+ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+- test ! -f $lt_ac_sed && break
++ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+@@ -5887,6 +6596,7 @@
+ done
+ ])
+ SED=$lt_cv_path_SED
++AC_SUBST([SED])
+ AC_MSG_RESULT([$SED])
+ ])
+ dnl
+--- a/admin/ltmain.sh
++++ b/admin/ltmain.sh
+@@ -1,8 +1,8 @@
+ # ltmain.sh - Provide generalized library-building support services.
+ # NOTE: Changing this file will not affect anything until you rerun configure.
+ #
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+-# Free Software Foundation, Inc.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
++# 2007 Free Software Foundation, Inc.
+ # Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+ #
+ # This program is free software; you can redistribute it and/or modify
+@@ -24,6 +24,42 @@
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
++basename="s,^.*/,,g"
++
++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
++# is ksh but when the shell is invoked as "sh" and the current value of
++# the _XPG environment variable is not equal to 1 (one), the special
++# positional parameter $0, within a function call, is the name of the
++# function.
++progpath="$0"
++
++# The name of this program:
++progname=`echo "$progpath" | $SED $basename`
++modename="$progname"
++
++# Global variables:
++EXIT_SUCCESS=0
++EXIT_FAILURE=1
++
++PROGRAM=ltmain.sh
++PACKAGE=libtool
++VERSION="1.5.24 Debian 1.5.24-2"
++TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
++
++# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
++fi
++BIN_SH=xpg4; export BIN_SH # for Tru64
++DUALCASE=1; export DUALCASE # for MKS sh
++
+ # Check that we have a working $echo.
+ if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+@@ -36,7 +72,7 @@
+ :
+ else
+ # Restart under the correct shell, and then maybe $echo will work.
+- exec $SHELL "$0" --no-reexec ${1+"$@"}
++ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+ fi
+
+ if test "X$1" = X--fallback-echo; then
+@@ -45,19 +81,9 @@
+ cat <<EOF
+ $*
+ EOF
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+-# The name of this program.
+-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
+-modename="$progname"
+-
+-# Constants.
+-PROGRAM=ltmain.sh
+-PACKAGE=libtool
+-VERSION=1.5a
+-TIMESTAMP=" (1.1240 2003/06/26 06:55:19)"
+-
+ default_mode=
+ help="Try \`$progname --help' for more information."
+ magic="%%%MAGIC variable%%%"
+@@ -70,14 +96,15 @@
+ Xsed="${SED}"' -e 1s/^X//'
+ sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+ # test EBCDIC or ASCII
+-case `echo A|tr A '\301'` in
+- A) # EBCDIC based system
+- SP2NL="tr '\100' '\n'"
+- NL2SP="tr '\r\n' '\100\100'"
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++ SP2NL='tr \040 \012'
++ NL2SP='tr \015\012 \040\040'
+ ;;
+- *) # Assume ASCII based system
+- SP2NL="tr '\040' '\012'"
+- NL2SP="tr '\015\012' '\040\040'"
++ *) # EBCDIC based system
++ SP2NL='tr \100 \n'
++ NL2SP='tr \r\n \100\100'
+ ;;
+ esac
+
+@@ -86,20 +113,24 @@
+ # These must not be set unconditionally because not all systems understand
+ # e.g. LANG=C (notably SCO).
+ # We save the old values to restore during execute mode.
+-if test "${LC_ALL+set}" = set; then
+- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+-fi
+-if test "${LANG+set}" = set; then
+- save_LANG="$LANG"; LANG=C; export LANG
+-fi
++for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++do
++ eval "if test \"\${$lt_var+set}\" = set; then
++ save_$lt_var=\$$lt_var
++ $lt_var=C
++ export $lt_var
++ fi"
++done
+
+ # Make sure IFS has a sensible default
+-: ${IFS=" "}
++lt_nl='
++'
++IFS=" $lt_nl"
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ $echo "$modename: not configured to build any kind of library" 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Global variables.
+@@ -111,17 +142,62 @@
+ show="$echo"
+ show_help=
+ execute_dlfiles=
++duplicate_deps=no
++preserve_args=
+ lo2o="s/\\.lo\$/.${objext}/"
+ o2lo="s/\\.${objext}\$/.lo/"
++extracted_archives=
++extracted_serial=0
+
+ #####################################
+ # Shell function definitions:
+ # This seems to be the best place for them
+
++# func_mktempdir [string]
++# Make a temporary directory that won't clash with other running
++# libtool processes, and avoids race conditions if possible. If
++# given, STRING is the basename for that directory.
++func_mktempdir ()
++{
++ my_template="${TMPDIR-/tmp}/${1-$progname}"
++
++ if test "$run" = ":"; then
++ # Return a directory name, but don't create it in dry-run mode
++ my_tmpdir="${my_template}-$$"
++ else
++
++ # If mktemp works, use that first and foremost
++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
++
++ if test ! -d "$my_tmpdir"; then
++ # Failing that, at least try and use $RANDOM to avoid a race
++ my_tmpdir="${my_template}-${RANDOM-0}$$"
++
++ save_mktempdir_umask=`umask`
++ umask 0077
++ $mkdir "$my_tmpdir"
++ umask $save_mktempdir_umask
++ fi
++
++ # If we're not in dry-run mode, bomb out on failure
++ test -d "$my_tmpdir" || {
++ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
++ exit $EXIT_FAILURE
++ }
++ fi
++
++ $echo "X$my_tmpdir" | $Xsed
++}
++
++
++# func_win32_libid arg
++# return the library type of file 'arg'
++#
+ # Need a lot of goo to handle *both* DLLs and import libs
+ # Has to be a shell function in order to 'eat' the argument
+ # that is supplied when $file_magic_command is called.
+-win32_libid () {
++func_win32_libid ()
++{
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+@@ -130,17 +206,22 @@
+ ;;
+ *ar\ archive*) # could be an import, or static
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+- grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
++ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 | \
+- sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
+- if test "X$win32_nmres" = "Ximport" ; then
+- win32_libid_type="x86 archive import"
+- else
+- win32_libid_type="x86 archive static"
+- fi
++ $SED -n -e '1,100{
++ / I /{
++ s,.*,import,
++ p
++ q
++ }
++ }'`
++ case $win32_nmres in
++ import*) win32_libid_type="x86 archive import";;
++ *) win32_libid_type="x86 archive static";;
++ esac
+ fi
+ ;;
+- *DLL*)
++ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+@@ -154,9 +235,191 @@
+ $echo $win32_libid_type
+ }
+
++
++# func_infer_tag arg
++# Infer tagged configuration to use if any are available and
++# if one wasn't chosen via the "--tag" command line option.
++# Only attempt this if the compiler in the base compile
++# command doesn't match the default compiler.
++# arg is usually of the form 'gcc ...'
++func_infer_tag ()
++{
++ if test -n "$available_tags" && test -z "$tagname"; then
++ CC_quoted=
++ for arg in $CC; do
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ CC_quoted="$CC_quoted $arg"
++ done
++ case $@ in
++ # Blanks in the command may have been stripped by the calling shell,
++ # but not from the CC environment variable when configure was run.
++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
++ # Blanks at the start of $base_compile will cause this to fail
++ # if we don't check for them as well.
++ *)
++ for z in $available_tags; do
++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
++ # Evaluate the configuration.
++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
++ CC_quoted=
++ for arg in $CC; do
++ # Double-quote args containing other shell metacharacters.
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ CC_quoted="$CC_quoted $arg"
++ done
++ case "$@ " in
++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
++ # The compiler in the base compile command matches
++ # the one in the tagged configuration.
++ # Assume this is the tagged configuration we want.
++ tagname=$z
++ break
++ ;;
++ esac
++ fi
++ done
++ # If $tagname still isn't set, then no tagged configuration
++ # was found and let the user know that the "--tag" command
++ # line option must be used.
++ if test -z "$tagname"; then
++ $echo "$modename: unable to infer tagged configuration"
++ $echo "$modename: specify a tag with \`--tag'" 1>&2
++ exit $EXIT_FAILURE
++# else
++# $echo "$modename: using $tagname tagged configuration"
++ fi
++ ;;
++ esac
++ fi
++}
++
++
++# func_extract_an_archive dir oldlib
++func_extract_an_archive ()
++{
++ f_ex_an_ar_dir="$1"; shift
++ f_ex_an_ar_oldlib="$1"
++
++ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
++ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
++ :
++ else
++ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
++ exit $EXIT_FAILURE
++ fi
++}
++
++# func_extract_archives gentop oldlib ...
++func_extract_archives ()
++{
++ my_gentop="$1"; shift
++ my_oldlibs=${1+"$@"}
++ my_oldobjs=""
++ my_xlib=""
++ my_xabs=""
++ my_xdir=""
++ my_status=""
++
++ $show "${rm}r $my_gentop"
++ $run ${rm}r "$my_gentop"
++ $show "$mkdir $my_gentop"
++ $run $mkdir "$my_gentop"
++ my_status=$?
++ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
++ exit $my_status
++ fi
++
++ for my_xlib in $my_oldlibs; do
++ # Extract the objects.
++ case $my_xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
++ *) my_xabs=`pwd`"/$my_xlib" ;;
++ esac
++ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
++ my_xlib_u=$my_xlib
++ while :; do
++ case " $extracted_archives " in
++ *" $my_xlib_u "*)
++ extracted_serial=`expr $extracted_serial + 1`
++ my_xlib_u=lt$extracted_serial-$my_xlib ;;
++ *) break ;;
++ esac
++ done
++ extracted_archives="$extracted_archives $my_xlib_u"
++ my_xdir="$my_gentop/$my_xlib_u"
++
++ $show "${rm}r $my_xdir"
++ $run ${rm}r "$my_xdir"
++ $show "$mkdir $my_xdir"
++ $run $mkdir "$my_xdir"
++ exit_status=$?
++ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
++ exit $exit_status
++ fi
++ case $host in
++ *-darwin*)
++ $show "Extracting $my_xabs"
++ # Do not bother doing anything if just a dry run
++ if test -z "$run"; then
++ darwin_orig_dir=`pwd`
++ cd $my_xdir || exit $?
++ darwin_archive=$my_xabs
++ darwin_curdir=`pwd`
++ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
++ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
++ if test -n "$darwin_arches"; then
++ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
++ darwin_arch=
++ $show "$darwin_base_archive has multiple architectures $darwin_arches"
++ for darwin_arch in $darwin_arches ; do
++ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
++ cd "$darwin_curdir"
++ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
++ done # $darwin_arches
++ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
++ darwin_file=
++ darwin_files=
++ for darwin_file in $darwin_filelist; do
++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
++ lipo -create -output "$darwin_file" $darwin_files
++ done # $darwin_filelist
++ ${rm}r unfat-$$
++ cd "$darwin_orig_dir"
++ else
++ cd "$darwin_orig_dir"
++ func_extract_an_archive "$my_xdir" "$my_xabs"
++ fi # $darwin_arches
++ fi # $run
++ ;;
++ *)
++ func_extract_an_archive "$my_xdir" "$my_xabs"
++ ;;
++ esac
++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
++ done
++ func_extract_archives_result="$my_oldobjs"
++}
+ # End of Shell function definitions
+ #####################################
+
++# Darwin sucks
++eval std_shrext=\"$shrext_cmds\"
++
++disable_libs=no
++
+ # Parse our command line options once, thoroughly.
+ while test "$#" -gt 0
+ do
+@@ -176,12 +439,13 @@
+ ;;
+ tag)
+ tagname="$arg"
++ preserve_args="${preserve_args}=$arg"
+
+ # Check whether tagname contains only valid characters
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ $echo "$progname: invalid tag name: $tagname" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+@@ -191,10 +455,10 @@
+ # not specially marked.
+ ;;
+ *)
+- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+ taglist="$taglist $tagname"
+ # Evaluate the configuration.
+- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+ else
+ $echo "$progname: ignoring unknown tag $tagname" 1>&2
+ fi
+@@ -218,26 +482,28 @@
+ ;;
+
+ --version)
+- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+- $echo
+- $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+- $echo "This is free software; see the source for copying conditions. There is NO"
+- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+- exit 0
++ echo "\
++$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
++
++Copyright (C) 2007 Free Software Foundation, Inc.
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++ exit $?
+ ;;
+
+ --config)
+- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
++ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
++ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+ done
+- exit 0
++ exit $?
+ ;;
+
+ --debug)
+ $echo "$progname: enabling shell trace mode"
+ set -x
++ preserve_args="$preserve_args $arg"
+ ;;
+
+ --dry-run | -n)
+@@ -256,7 +522,7 @@
+ else
+ $echo "disable static libraries"
+ fi
+- exit 0
++ exit $?
+ ;;
+
+ --finish) mode="finish" ;;
+@@ -268,13 +534,19 @@
+
+ --quiet | --silent)
+ show=:
++ preserve_args="$preserve_args $arg"
+ ;;
+
+- --tag) prevopt="--tag" prev=tag ;;
++ --tag)
++ prevopt="--tag"
++ prev=tag
++ preserve_args="$preserve_args --tag"
++ ;;
+ --tag=*)
+ set tag "$optarg" ${1+"$@"}
+ shift
+ prev=tag
++ preserve_args="$preserve_args --tag"
+ ;;
+
+ -dlopen)
+@@ -285,7 +557,7 @@
+ -*)
+ $echo "$modename: unrecognized option \`$arg'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+
+ *)
+@@ -298,9 +570,21 @@
+ if test -n "$prevopt"; then
+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
++case $disable_libs in
++no)
++ ;;
++shared)
++ build_libtool_libs=no
++ build_old_libs=yes
++ ;;
++static)
++ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
++ ;;
++esac
++
+ # If this variable is set in any of the actions, the command in it
+ # will be execed at the end. This prevents here-documents from being
+ # left over by shells.
+@@ -311,7 +595,7 @@
+ # Infer the operation mode.
+ if test -z "$mode"; then
+ $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+- $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
++ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+ case $nonopt in
+ *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+ mode=link
+@@ -354,7 +638,7 @@
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+@@ -369,13 +653,15 @@
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
++ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
++ later=
+
+ for arg
+ do
+- case "$arg_mode" in
++ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+@@ -394,24 +680,19 @@
+ -o)
+ if test -n "$libobj" ; then
+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ arg_mode=target
+ continue
+ ;;
+
+- -static)
+- build_old_libs=yes
++ -static | -prefer-pic | -prefer-non-pic)
++ later="$later $arg"
+ continue
+ ;;
+
+- -prefer-pic)
+- pic_mode=yes
+- continue
+- ;;
+-
+- -prefer-non-pic)
+- pic_mode=no
++ -no-suppress)
++ suppress_opt=no
+ continue
+ ;;
+
+@@ -424,7 +705,7 @@
+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+- for arg in $args; do
++ for arg in $args; do
+ IFS="$save_ifs"
+
+ # Double-quote args containing other shell metacharacters.
+@@ -462,7 +743,10 @@
+ case $lastarg in
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+- # in scan sets, so we specify it separately.
++ # in scan sets, and some SunOS ksh mistreat backslash-escaping
++ # in scan sets (worked around with variable expansion),
++ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
++ # at all, so we specify them separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ lastarg="\"$lastarg\""
+ ;;
+@@ -474,11 +758,11 @@
+ case $arg_mode in
+ arg)
+ $echo "$modename: you must specify an argument for -Xcompile"
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ target)
+ $echo "$modename: you must specify a target with \`-o'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ *)
+ # Get the name of the library object.
+@@ -500,9 +784,10 @@
+ *.class) xform=class ;;
+ *.cpp) xform=cpp ;;
+ *.cxx) xform=cxx ;;
+- *.f90) xform=f90 ;;
++ *.[fF][09]?) xform=[fF][09]. ;;
+ *.for) xform=for ;;
+ *.java) xform=java ;;
++ *.obj) xform=obj ;;
+ esac
+
+ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+@@ -511,51 +796,39 @@
+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+ *)
+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+- # Infer tagged configuration to use if any are available and
+- # if one wasn't chosen via the "--tag" command line option.
+- # Only attempt this if the compiler in the base compile
+- # command doesn't match the default compiler.
+- if test -n "$available_tags" && test -z "$tagname"; then
+- case $base_compile in
+- # Blanks in the command may have been stripped by the calling shell,
+- # but not from the CC environment variable when configure was run.
+- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
+- # Blanks at the start of $base_compile will cause this to fail
+- # if we don't check for them as well.
+- *)
+- for z in $available_tags; do
+- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+- # Evaluate the configuration.
+- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+- case "$base_compile " in
+- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
+- # The compiler in the base compile command matches
+- # the one in the tagged configuration.
+- # Assume this is the tagged configuration we want.
+- tagname=$z
+- break
+- ;;
+- esac
+- fi
+- done
+- # If $tagname still isn't set, then no tagged configuration
+- # was found and let the user know that the "--tag" command
+- # line option must be used.
+- if test -z "$tagname"; then
+- $echo "$modename: unable to infer tagged configuration"
+- $echo "$modename: specify a tag with \`--tag'" 1>&2
+- exit 1
+-# else
+-# $echo "$modename: using $tagname tagged configuration"
+- fi
++ func_infer_tag $base_compile
++
++ for arg in $later; do
++ case $arg in
++ -static)
++ build_old_libs=yes
++ continue
++ ;;
++
++ -prefer-pic)
++ pic_mode=yes
++ continue
++ ;;
++
++ -prefer-non-pic)
++ pic_mode=no
++ continue
+ ;;
+ esac
+- fi
++ done
+
++ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
++ case $qlibobj in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ qlibobj="\"$qlibobj\"" ;;
++ esac
++ test "X$libobj" != "X$qlibobj" \
++ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
++ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$obj"; then
+@@ -568,7 +841,7 @@
+ if test -z "$base_compile"; then
+ $echo "$modename: you must specify a compilation command" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Delete any leftover library objects.
+@@ -579,7 +852,7 @@
+ fi
+
+ $run $rm $removelist
+- trap "$run $rm $removelist; exit 1" 1 2 15
++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+@@ -598,7 +871,7 @@
+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ removelist="$removelist $output_obj $lockfile"
+- trap "$run $rm $removelist; exit 1" 1 2 15
++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+ else
+ output_obj=
+ need_locks=no
+@@ -608,7 +881,7 @@
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+- until $run ln "$0" "$lockfile" 2>/dev/null; do
++ until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+ $show "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+@@ -626,14 +899,19 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+- $echo $srcfile > "$lockfile"
++ $echo "$srcfile" > "$lockfile"
+ fi
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
++ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
++ case $qsrcfile in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ qsrcfile="\"$qsrcfile\"" ;;
++ esac
+
+ $run $rm "$libobj" "${libobj}T"
+
+@@ -655,18 +933,18 @@
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+- command="$base_compile $srcfile $pic_flag"
++ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+- command="$base_compile $srcfile"
++ command="$base_compile $qsrcfile"
+ fi
+
+ if test ! -d "${xdir}$objdir"; then
+ $show "$mkdir ${xdir}$objdir"
+ $run $mkdir ${xdir}$objdir
+- status=$?
+- if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
+- exit $status
++ exit_status=$?
++ if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
++ exit $exit_status
+ fi
+ fi
+
+@@ -681,7 +959,7 @@
+ if $run eval "$command"; then :
+ else
+ test -n "$output_obj" && $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$need_locks" = warn &&
+@@ -701,7 +979,7 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+@@ -722,7 +1000,9 @@
+ EOF
+
+ # Allow error messages only from the first compilation.
+- suppress_output=' >/dev/null 2>&1'
++ if test "$suppress_opt" = yes; then
++ suppress_output=' >/dev/null 2>&1'
++ fi
+ else
+ # No PIC object so indicate it doesn't exist in the libtool
+ # object file.
+@@ -736,9 +1016,9 @@
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+- command="$base_compile $srcfile"
++ command="$base_compile $qsrcfile"
+ else
+- command="$base_compile $srcfile $pic_flag"
++ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+@@ -751,7 +1031,7 @@
+ if $run eval "$command"; then :
+ else
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$need_locks" = warn &&
+@@ -771,7 +1051,7 @@
+ compiler."
+
+ $run $rm $removelist
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+@@ -809,7 +1089,7 @@
+ $run $rm "$lockfile"
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool link mode
+@@ -835,7 +1115,7 @@
+ ;;
+ esac
+ libtool_args="$nonopt"
+- base_compile="$nonopt"
++ base_compile="$nonopt $@"
+ compile_command="$nonopt"
+ finalize_command="$nonopt"
+
+@@ -847,7 +1127,6 @@
+ old_convenience=
+ deplibs=
+ old_deplibs=
+- add_flags=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+@@ -868,6 +1147,8 @@
+ no_install=no
+ objs=
+ non_pic_objects=
++ notinst_path= # paths that contain not-installed libtool libraries
++ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+@@ -881,26 +1162,38 @@
+ vinfo=
+ vinfo_number=no
+
++ func_infer_tag $base_compile
++
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+- -all-static | -static)
+- if test "X$arg" = "X-all-static"; then
++ -all-static | -static | -static-libtool-libs)
++ case $arg in
++ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+- else
++ prefer_static_libs=yes
++ ;;
++ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+- fi
++ prefer_static_libs=built
++ ;;
++ -static-libtool-libs)
++ if test -z "$pic_flag" && test -n "$link_static_flag"; then
++ dlopen_self=$dlopen_self_static
++ fi
++ prefer_static_libs=yes
++ ;;
++ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+- prefer_static_libs=yes
+ break
+ ;;
+ esac
+@@ -912,7 +1205,6 @@
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+- base_compile="$base_compile $arg"
+ shift
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+@@ -976,7 +1268,7 @@
+ export_symbols="$arg"
+ if test ! -f "$arg"; then
+ $echo "$modename: symbol file \`$arg' does not exist"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ prev=
+ continue
+@@ -991,6 +1283,11 @@
+ prev=
+ continue
+ ;;
++ precious_regex)
++ precious_files_regex="$arg"
++ prev=
++ continue
++ ;;
+ release)
+ release="-$arg"
+ prev=
+@@ -1023,7 +1320,7 @@
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Extract subdirectory from the argument.
+@@ -1071,12 +1368,17 @@
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
++ else
++ # If the PIC object exists, use it instead.
++ # $xdir was prepended to $pic_object above.
++ non_pic_object="$pic_object"
++ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ else
+ # Dry-run case.
+
+@@ -1097,7 +1399,7 @@
+ done
+ else
+ $echo "$modename: link input file \`$save_arg' does not exist"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ arg=$save_arg
+ prev=
+@@ -1109,7 +1411,7 @@
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ if test "$prev" = rpath; then
+@@ -1149,16 +1451,15 @@
+ finalize_command="$finalize_command $qarg"
+ continue
+ ;;
+- framework)
+- case $host in
+- *-*-darwin*)
+- case "$deplibs " in
+- *" $qarg.ltframework "*) ;;
+- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+- ;;
+- esac
+- ;;
+- esac
++ shrext)
++ shrext_cmds="$arg"
++ prev=
++ continue
++ ;;
++ darwin_framework|darwin_framework_skip)
++ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
+ prev=
+ continue
+ ;;
+@@ -1210,7 +1511,7 @@
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: more than one -exported-symbols argument is not allowed"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+@@ -1220,6 +1521,18 @@
+ continue
+ ;;
+
++ -framework|-arch|-isysroot)
++ case " $CC " in
++ *" ${arg} ${1} "* | *" ${arg} ${1} "*)
++ prev=darwin_framework_skip ;;
++ *) compiler_flags="$compiler_flags $arg"
++ prev=darwin_framework ;;
++ esac
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ continue
++ ;;
++
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+@@ -1246,7 +1559,8 @@
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+- exit 1
++ absdir="$dir"
++ notinst_path="$notinst_path $dir"
+ fi
+ dir="$absdir"
+ ;;
+@@ -1260,10 +1574,15 @@
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$dir";;
+ esac
++ case :$dllsearchpath: in
++ *":$testbindir:"*) ;;
++ *) dllsearchpath="$dllsearchpath:$testbindir";;
++ esac
+ ;;
+ esac
+ continue
+@@ -1272,26 +1591,35 @@
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+- *-*-cygwin* | *-*-pw32* | *-*-beos*)
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+- *-*-mingw* | *-*-os2*)
++ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+- *-*-openbsd* | *-*-freebsd*)
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+- deplibs="$deplibs System.ltframework"
++ deplibs="$deplibs -framework System"
+ continue
++ ;;
++ *-*-sco3.2v5* | *-*-sco5v6*)
++ # Causes problems with __ctype
++ test "X$arg" = "X-lc" && continue
++ ;;
++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++ # Compiler inserts libc in the correct place for threads to work
++ test "X$arg" = "X-lc" && continue
++ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+- *-*-openbsd*)
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+@@ -1301,18 +1629,42 @@
+ continue
+ ;;
+
++ # Tru64 UNIX uses -model [arg] to determine the layout of C++
++ # classes, name mangling, and exception handling.
++ -model)
++ compile_command="$compile_command $arg"
++ compiler_flags="$compiler_flags $arg"
++ finalize_command="$finalize_command $arg"
++ prev=xcompiler
++ continue
++ ;;
++
++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
++ compiler_flags="$compiler_flags $arg"
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ continue
++ ;;
++
+ -module)
+ module=yes
+ continue
+ ;;
+
+- # gcc -m* arguments should be passed to the linker via $compiler_flags
+- # in order to pass architecture information to the linker
+- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
+- # but this is not reliable with gcc because gcc may use -mfoo to
+- # select a different linker, different libraries, etc, while
+- # -Wl,-mfoo simply passes -mfoo to the linker.
+- -m*)
++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
++ # -r[0-9][0-9]* specifies the processor on the SGI compiler
++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
++ # +DA*, +DD* enable 64-bit mode on the HP compiler
++ # -q* pass through compiler args for the IBM compiler
++ # -m* pass through architecture-specific compiler args for GCC
++ # -m*, -t[45]*, -txscale* pass through architecture-specific
++ # compiler args for GCC
++ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
++ # -F/path gives path to uninstalled frameworks, gcc on darwin
++ # @file GCC response files
++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
++
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+@@ -1323,9 +1675,7 @@
+ esac
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+- if test "$with_gcc" = "yes" ; then
+- compiler_flags="$compiler_flags $arg"
+- fi
++ compiler_flags="$compiler_flags $arg"
+ continue
+ ;;
+
+@@ -1341,9 +1691,9 @@
+
+ -no-install)
+ case $host in
+- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+ # The PATH hackery in wrapper scripts is required on Windows
+- # in order for the loader to find any dlls it needs.
++ # and Darwin in order for the loader to find any dlls it needs.
+ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+ fast_install=no
+@@ -1365,6 +1715,11 @@
+
+ -o) prev=output ;;
+
++ -precious-files-regex)
++ prev=precious_regex
++ continue
++ ;;
++
+ -release)
+ prev=release
+ continue
+@@ -1387,7 +1742,7 @@
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ case "$xrpath " in
+@@ -1397,7 +1752,7 @@
+ continue
+ ;;
+
+- -static)
++ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+@@ -1473,11 +1828,6 @@
+ continue
+ ;;
+
+- -framework)
+- prev=framework
+- continue
+- ;;
+-
+ # Some other compiler flag.
+ -* | +*)
+ # Unknown arguments in both finalize_command and compile_command need
+@@ -1488,7 +1838,6 @@
+ arg="\"$arg\""
+ ;;
+ esac
+- add_flags="$add_flags $arg"
+ ;;
+
+ *.$objext)
+@@ -1516,7 +1865,7 @@
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Extract subdirectory from the argument.
+@@ -1564,12 +1913,17 @@
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
++ else
++ # If the PIC object exists, use it instead.
++ # $xdir was prepended to $pic_object above.
++ non_pic_object="$pic_object"
++ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ else
+ # Dry-run case.
+
+@@ -1623,7 +1977,6 @@
+ arg="\"$arg\""
+ ;;
+ esac
+- add_flags="$add_flags $arg"
+ ;;
+ esac # arg
+
+@@ -1637,48 +1990,7 @@
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
+- fi
+-
+- # Infer tagged configuration to use if any are available and
+- # if one wasn't chosen via the "--tag" command line option.
+- # Only attempt this if the compiler in the base link
+- # command doesn't match the default compiler.
+- if test -n "$available_tags" && test -z "$tagname"; then
+- case $base_compile in
+- # Blanks in the command may have been stripped by the calling shell,
+- # but not from the CC environment variable when configure was run.
+- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
+- # Blanks at the start of $base_compile will cause this to fail
+- # if we don't check for them as well.
+- *)
+- for z in $available_tags; do
+- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+- # Evaluate the configuration.
+- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+- case $base_compile in
+- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
+- # The compiler in $compile_command matches
+- # the one in the tagged configuration.
+- # Assume this is the tagged configuration we want.
+- tagname=$z
+- break
+- ;;
+- esac
+- fi
+- done
+- # If $tagname still isn't set, then no tagged configuration
+- # was found and let the user know that the "--tag" command
+- # line option must be used.
+- if test -z "$tagname"; then
+- $echo "$modename: unable to infer tagged configuration"
+- $echo "$modename: specify a tag with \`--tag'" 1>&2
+- exit 1
+-# else
+-# $echo "$modename: using $tagname tagged configuration"
+- fi
+- ;;
+- esac
++ exit $EXIT_FAILURE
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+@@ -1711,9 +2023,9 @@
+ if test ! -d "$output_objdir"; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+- status=$?
+- if test "$status" -ne 0 && test ! -d "$output_objdir"; then
+- exit $status
++ exit_status=$?
++ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
++ exit $exit_status
+ fi
+ fi
+
+@@ -1722,7 +2034,7 @@
+ "")
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+@@ -1732,7 +2044,7 @@
+
+ case $host in
+ *cygwin* | *mingw* | *pw32*)
+- # don't eliminate duplcations in $postdeps and $predeps
++ # don't eliminate duplications in $postdeps and $predeps
+ duplicate_compiler_generated_deps=yes
+ ;;
+ *)
+@@ -1776,7 +2088,6 @@
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+- notinst_path= # paths that contain not-installed libtool libraries
+ case $linkmode in
+ lib)
+ passes="conv link"
+@@ -1785,7 +2096,7 @@
+ *.la) ;;
+ *)
+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ done
+@@ -1811,7 +2122,10 @@
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
++ link)
++ libs="$deplibs %DEPLIBS%"
++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++ ;;
+ esac
+ fi
+ if test "$pass" = dlopen; then
+@@ -1823,18 +2137,23 @@
+ lib=
+ found=no
+ case $deplib in
++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ compiler_flags="$compiler_flags $deplib"
++ fi
++ continue
++ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+ continue
+ fi
+- if test "$pass" = conv && test "$allow_undefined" = yes; then
+- deplibs="$deplib $deplibs"
+- continue
+- fi
+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- for search_ext in .la $shrext .so .a; do
++ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+@@ -1895,18 +2214,6 @@
+ fi
+ fi
+ ;; # -l
+- *.ltframework)
+- if test "$linkmode,$pass" = "prog,link"; then
+- compile_deplibs="$deplib $compile_deplibs"
+- finalize_deplibs="$deplib $finalize_deplibs"
+- else
+- deplibs="$deplib $deplibs"
+- if test "$linkmode" = lib ; then
+- newdependency_libs="$deplib $newdependency_libs"
+- fi
+- fi
+- continue
+- ;;
+ -L*)
+ case $linkmode in
+ lib)
+@@ -1922,11 +2229,11 @@
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ *)
+ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+@@ -1954,7 +2261,22 @@
+ fi
+ case $linkmode in
+ lib)
+- if test "$deplibs_check_method" != pass_all; then
++ valid_a_lib=no
++ case $deplibs_check_method in
++ match_pattern*)
++ set dummy $deplibs_check_method
++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
++ if eval $echo \"$deplib\" 2>/dev/null \
++ | $SED 10q \
++ | $EGREP "$match_pattern_regex" > /dev/null; then
++ valid_a_lib=yes
++ fi
++ ;;
++ pass_all)
++ valid_a_lib=yes
++ ;;
++ esac
++ if test "$valid_a_lib" != yes; then
+ $echo
+ $echo "*** Warning: Trying to link with static lib archive $deplib."
+ $echo "*** I have the capability to make that library automatically link in when"
+@@ -2004,15 +2326,15 @@
+ esac # case $deplib
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+- $echo "$modename: cannot find the library \`$lib'" 1>&2
+- exit 1
++ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
++ exit $EXIT_FAILURE
+ fi
+
+ # Check to see that this really is a libtool archive.
+ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+@@ -2028,6 +2350,8 @@
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
++ avoidtemprpath=
++
+
+ # Read the .la file
+ case $lib in
+@@ -2035,13 +2359,6 @@
+ *) . ./$lib ;;
+ esac
+
+- case $host in
+- *-*-darwin*)
+- # Convert "-framework foo" to "foo.ltframework" in dependency_libs
+- test -n "$dependency_libs" && dependency_libs=`$echo "X$dependency_libs" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+- ;;
+- esac
+-
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+@@ -2052,33 +2369,32 @@
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+- tmp_libs=
+- for deplib in $dependency_libs; do
+- #echo "Adding $deplib to \$deplibs"
+- deplibs="$deplib $deplibs"
+- if test "X$duplicate_deps" = "Xyes" ; then
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
+- fi
+- tmp_libs="$tmp_libs $deplib"
+- done
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ deplibs="$deplib $deplibs"
++ if test "X$duplicate_deps" = "Xyes" ; then
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ fi
++ tmp_libs="$tmp_libs $deplib"
++ done
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ continue
+ fi # $pass = conv
+
+-
++
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+@@ -2086,16 +2402,18 @@
+ done
+ if test -z "$linklib"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ if test -z "$dlname" ||
++ test "$dlopen_support" != yes ||
++ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+@@ -2132,11 +2450,19 @@
+ dir="$libdir"
+ absdir="$libdir"
+ fi
++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+- dir="$ladir/$objdir"
+- absdir="$abs_ladir/$objdir"
+- # Remove this search path later
+- notinst_path="$notinst_path $abs_ladir"
++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++ dir="$ladir"
++ absdir="$abs_ladir"
++ # Remove this search path later
++ notinst_path="$notinst_path $abs_ladir"
++ else
++ dir="$ladir/$objdir"
++ absdir="$abs_ladir/$objdir"
++ # Remove this search path later
++ notinst_path="$notinst_path $abs_ladir"
++ fi
+ fi # $installed = yes
+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+@@ -2144,7 +2470,7 @@
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+@@ -2171,7 +2497,7 @@
+ continue
+ fi
+
+-
++
+ if test "$linkmode" = prog && test "$pass" != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+@@ -2207,14 +2533,16 @@
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
++ { { test "$prefer_static_libs" = no ||
++ test "$prefer_static_libs,$installed" = "built,yes"; } ||
++ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+- if test -n "$shlibpath_var"; then
++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath " in
+ *" $dir "*) ;;
+ *" $absdir "*) ;;
+- *) temp_rpath="$temp_rpath $dir" ;;
++ *) temp_rpath="$temp_rpath $absdir" ;;
+ esac
+ fi
+
+@@ -2251,24 +2579,29 @@
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
++ use_static_libs=$prefer_static_libs
++ if test "$use_static_libs" = built && test "$installed" = yes ; then
++ use_static_libs=no
++ fi
+ if test -n "$library_names" &&
+- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
++ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ if test "$installed" = no; then
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=yes
+ fi
+ # This is a shared library
+-
+- # Warn about portability, can't link against -module's on some systems (darwin)
+- if test "$shouldnotlink" = yes && test "$pass" = link ; then
++
++ # Warn about portability, can't link against -module's on
++ # some systems (darwin)
++ if test "$shouldnotlink" = yes && test "$pass" = link ; then
+ $echo
+ if test "$linkmode" = prog; then
+ $echo "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $echo "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+- $echo "*** $linklib is not portable!"
+- fi
++ $echo "*** $linklib is not portable!"
++ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+@@ -2326,9 +2659,10 @@
+ else
+ $show "extracting exported symbol list from \`$soname'"
+ save_ifs="$IFS"; IFS='~'
+- eval cmds=\"$extract_expsyms_cmds\"
++ cmds=$extract_expsyms_cmds
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -2339,9 +2673,10 @@
+ if test -f "$output_objdir/$newlib"; then :; else
+ $show "generating import library for \`$soname'"
+ save_ifs="$IFS"; IFS='~'
+- eval cmds=\"$old_archive_from_expsyms_cmds\"
++ cmds=$old_archive_from_expsyms_cmds
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -2362,11 +2697,15 @@
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+- *-*-sco3.2v5* ) add_dir="-L$dir" ;;
++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
++ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
++ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+- # if the lib is a module then we can not link against it, someone
+- # is ignoring the new warnings I added
+- if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
++ # if the lib is a module then we can not link against
++ # it, someone is ignoring the new warnings I added
++ if /usr/bin/file -L $add 2> /dev/null |
++ $EGREP ": [^:]* bundle" >/dev/null ; then
+ $echo "** Warning, lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ $echo
+@@ -2374,7 +2713,7 @@
+ $echo "** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+- fi
++ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+@@ -2397,9 +2736,9 @@
+ add_dir="-L$dir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+- case "$libdir" in
++ case $libdir in
+ [\\/]*)
+- add_dir="-L$inst_prefix_dir$libdir $add_dir"
++ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+@@ -2416,7 +2755,7 @@
+
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$add_shlibpath"; then
+@@ -2459,7 +2798,8 @@
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+- if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
++ if test -n "$inst_prefix_dir" &&
++ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+@@ -2469,9 +2809,9 @@
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+- case "$libdir" in
++ case $libdir in
+ [\\/]*)
+- add_dir="-L$inst_prefix_dir$libdir $add_dir"
++ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+@@ -2530,17 +2870,16 @@
+ fi
+ fi
+ else
+- convenience="$convenience $dir/$old_library"
+- old_convenience="$old_convenience $dir/$old_library"
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+- #if test -n "$dependency_libs" &&
+- # { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
+- # test "$link_static" = yes; }; then
++ if test -n "$dependency_libs" &&
++ { test "$hardcode_into_libs" != yes ||
++ test "$build_old_libs" = yes ||
++ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+@@ -2554,7 +2893,7 @@
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+- #fi
++ fi
+
+ newlib_search_path="$newlib_search_path $absdir"
+ # Link against this library
+@@ -2596,20 +2935,18 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "$absdir" != "$libdir"; then
+- # Sure, some shells/systems don't implement the -ef.
+- # Those will have to live with the warning.
+- test "$absdir" -ef "$libdir" > /dev/null 2>&1 ||
+- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
++ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+ fi
+ path="$absdir"
+ fi
+ depdepl=
+ case $host in
+ *-*-darwin*)
+- # we do not want to link against static libs, but need to link against shared
++ # we do not want to link against static libs,
++ # but need to link against shared
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+@@ -2617,55 +2954,45 @@
+ done
+ if test -f "$path/$depdepl" ; then
+ depdepl="$path/$depdepl"
+- fi
++ fi
+ # do not add paths which are already there
+ case " $newlib_search_path " in
+ *" $path "*) ;;
+ *) newlib_search_path="$newlib_search_path $path";;
+ esac
+- path=""
+ fi
++ path=""
+ ;;
+ *)
+- path="-L$path"
+- ;;
+- esac
+-
++ path="-L$path"
++ ;;
++ esac
+ ;;
+- -l*)
++ -l*)
+ case $host in
+ *-*-darwin*)
+- # Again, we only want to link against shared libraries
+- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+- for tmp in $newlib_search_path ; do
+- if test -f "$tmp/lib$tmp_libs.dylib" ; then
+- eval depdepl="$tmp/lib$tmp_libs.dylib"
+- break
+- fi
+- done
+- path=""
++ # Again, we only want to link against shared libraries
++ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
++ for tmp in $newlib_search_path ; do
++ if test -f "$tmp/lib$tmp_libs.dylib" ; then
++ eval depdepl="$tmp/lib$tmp_libs.dylib"
++ break
++ fi
++ done
++ path=""
+ ;;
+ *) continue ;;
+- esac
+- ;;
+-
+- *.ltframework)
+- case $host in
+- *-*-darwin*)
+- depdepl="$deplib"
+- ;;
+ esac
+ ;;
+-
+ *) continue ;;
+ esac
+ case " $deplibs " in
+- *" $depdepl "*) ;;
+- *) deplibs="$deplibs $depdepl" ;;
+- esac
+- case " $deplibs " in
+ *" $path "*) ;;
+- *) deplibs="$deplibs $path" ;;
++ *) deplibs="$path $deplibs" ;;
++ esac
++ case " $deplibs " in
++ *" $depdepl "*) ;;
++ *) deplibs="$depdepl $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+@@ -2752,7 +3079,8 @@
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+- # Last step: remove runtime libs from dependency_libs (they stay in deplibs)
++ # Last step: remove runtime libs from dependency_libs
++ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+@@ -2812,19 +3140,19 @@
+ case $outputname in
+ lib*)
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+- eval shared_ext=\"$shrext\"
++ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ if test "$module" = no; then
+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+- eval shared_ext=\"$shrext\"
++ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+@@ -2835,7 +3163,7 @@
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+- exit 1
++ exit $EXIT_FAILURE
+ else
+ $echo
+ $echo "*** Warning: Linking the shared library $output against the non-libtool"
+@@ -2883,13 +3211,13 @@
+ if test -n "$8"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+-
++
+ case $vinfo_number in
+ yes)
+ number_major="$2"
+@@ -2903,7 +3231,7 @@
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+- darwin|linux|osf|windows)
++ darwin|linux|osf|windows|none)
+ current=`expr $number_major + $number_minor`
+ age="$number_minor"
+ revision="$number_revision"
+@@ -2914,9 +3242,15 @@
+ age="0"
+ ;;
+ irix|nonstopux)
+- current=`expr $number_major + $number_minor - 1`
++ current=`expr $number_major + $number_minor`
+ age="$number_minor"
+ revision="$number_minor"
++ lt_irix_increment=no
++ ;;
++ *)
++ $echo "$modename: unknown library version type \`$version_type'" 1>&2
++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ ;;
+@@ -2929,36 +3263,36 @@
+
+ # Check that each of the things are valid numbers.
+ case $current in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
++ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $revision in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
++ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $age in
+- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
++ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Calculate the version variables.
+@@ -2975,6 +3309,7 @@
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ minor_current=`expr $current + 1`
++ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+@@ -2989,8 +3324,11 @@
+ ;;
+
+ irix | nonstopux)
+- major=`expr $current - $age + 1`
+-
++ if test "X$lt_irix_increment" = "Xno"; then
++ major=`expr $current - $age`
++ else
++ major=`expr $current - $age + 1`
++ fi
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+@@ -3047,7 +3385,7 @@
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+@@ -3098,9 +3436,15 @@
+ tempremovelist=`$echo "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+- *.$objext | *$exeext)
++ *.$objext)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
++ if test "X$precious_files_regex" != "X"; then
++ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
++ then
++ continue
++ fi
++ fi
+ removelist="$removelist $p"
+ ;;
+ *) ;;
+@@ -3121,11 +3465,11 @@
+ fi
+
+ # Eliminate all temporary directories.
+- for path in $notinst_path; do
+- lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
+- deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
+- dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+- done
++ #for path in $notinst_path; do
++ # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
++ # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
++ # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
++ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+@@ -3137,7 +3481,7 @@
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+- if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+@@ -3170,14 +3514,19 @@
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+- deplibs="$deplibs System.ltframework"
++ deplibs="$deplibs -framework System"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+- *-*-openbsd* | *-*-freebsd*)
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+- test "X$arg" = "X-lc" && continue
++ ;;
++ *-*-sco3.2v5* | *-*-sco5v6*)
++ # Causes problems with __ctype
++ ;;
++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+@@ -3221,13 +3570,12 @@
+ int main() { return 0; }
+ EOF
+ $rm conftest
+- $LTCC -o conftest conftest.c $deplibs
+- if test "$?" -eq 0 ; then
++ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+- name="`expr $i : '-l\(.*\)'`"
++ name=`expr $i : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+- if test "$name" != "" && test "$name" -ne "0"; then
++ if test "$name" != "" && test "$name" != "0"; then
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+@@ -3262,13 +3610,11 @@
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+- name="`expr $i : '-l\(.*\)'`"
++ name=`expr $i : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" && test "$name" != "0"; then
+ $rm conftest
+- $LTCC -o conftest conftest.c $i
+- # Did it work?
+- if test "$?" -eq 0 ; then
++ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+@@ -3300,7 +3646,7 @@
+ droppeddeps=yes
+ $echo
+ $echo "*** Warning! Library $i is needed by this library but I was not able to"
+- $echo "*** make it link in! You will probably need to install it or some"
++ $echo "*** make it link in! You will probably need to install it or some"
+ $echo "*** library that it depends on before this library will be fully"
+ $echo "*** functional. Installing it before continuing would be even better."
+ fi
+@@ -3314,7 +3660,7 @@
+ set dummy $deplibs_check_method
+ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ for a_deplib in $deplibs; do
+- name="`expr $a_deplib : '-l\(.*\)'`"
++ name=`expr $a_deplib : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" && test "$name" != "0"; then
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+@@ -3383,7 +3729,7 @@
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ for a_deplib in $deplibs; do
+- name="`expr $a_deplib : '-l\(.*\)'`"
++ name=`expr $a_deplib : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+ if test -n "$name" && test "$name" != "0"; then
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+@@ -3463,7 +3809,7 @@
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
++ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ ;;
+ esac
+
+@@ -3509,17 +3855,39 @@
+ fi
+ fi
+ fi
+- # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+- case $host in
+- *-*-darwin*)
+- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+- dependency_libs=`$echo "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+- ;;
+- esac
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+
++
++ # move library search paths that coincide with paths to not yet
++ # installed libraries to the beginning of the library search list
++ new_libs=
++ for path in $notinst_path; do
++ case " $new_libs " in
++ *" -L$path/$objdir "*) ;;
++ *)
++ case " $deplibs " in
++ *" -L$path/$objdir "*)
++ new_libs="$new_libs -L$path/$objdir" ;;
++ esac
++ ;;
++ esac
++ done
++ for deplib in $deplibs; do
++ case $deplib in
++ -L*)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) new_libs="$new_libs $deplib" ;;
++ esac
++ ;;
++ *) new_libs="$new_libs $deplib" ;;
++ esac
++ done
++ deplibs="$new_libs"
++
++
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+@@ -3532,7 +3900,7 @@
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+- test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath"
++ test "$mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+@@ -3564,7 +3932,10 @@
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ if test -n "$hardcode_libdir_flag_spec_ld"; then
+- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
++ case $archive_cmds in
++ *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
++ *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
++ esac
+ else
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+@@ -3587,7 +3958,7 @@
+ fi
+
+ # Get the real and link names of the library.
+- eval shared_ext=\"$shrext\"
++ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ realname="$2"
+@@ -3603,6 +3974,7 @@
+ fi
+
+ lib="$output_objdir/$realname"
++ linknames=
+ for link
+ do
+ linknames="$linknames $link"
+@@ -3617,10 +3989,11 @@
+ $show "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+- eval cmds=\"$export_symbols_cmds\"
++ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ if len=`expr "X$cmd" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ $show "$cmd"
+@@ -3630,6 +4003,9 @@
+ # The command line is too long to execute in one step.
+ $show "using reloadable object file for export list..."
+ skipped_export=:
++ # Break out early, otherwise skipped_export may be
++ # set to false by a later but shorter cmd.
++ break
+ fi
+ done
+ IFS="$save_ifs"
+@@ -3650,12 +4026,12 @@
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+- *)
++ *)
+ tmp_deplibs="$tmp_deplibs $test_deplib"
+ ;;
+ esac
+ done
+- deplibs="$tmp_deplibs"
++ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+@@ -3663,67 +4039,13 @@
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ else
+ gentop="$output_objdir/${outputname}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "$mkdir $gentop"
+- $run $mkdir "$gentop"
+- status=$?
+- if test "$status" -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
+ generated="$generated $gentop"
+
+- for xlib in $convenience; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "$mkdir $xdir"
+- $run $mkdir "$xdir"
+- status=$?
+- if test "$status" -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- # We will extract separately just the conflicting names and we will no
+- # longer touch any unique names. It is faster to leave these extract
+- # automatically by $AR in one run.
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
+- :
+- else
+- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+- $AR t "$xabs" | sort | uniq -cd | while read -r count name
+- do
+- i=1
+- while test "$i" -le "$count"
+- do
+- # Put our $i before any first dot (extension)
+- # Never overwrite any file
+- name_to="$name"
+- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
+- do
+- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+- done
+- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
+- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
+- i=`expr $i + 1`
+- done
+- done
+- fi
+-
+- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+- done
++ func_extract_archives $gentop $convenience
++ libobjs="$libobjs $func_extract_archives_result"
+ fi
+ fi
+-
++
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ linker_flags="$linker_flags $flag"
+@@ -3734,31 +4056,27 @@
+ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+ fi
+
+- # Add all flags from the command line. We here create a library,
+- # but those flags were only added to compile_command and
+- # finalize_command, which are only used when creating executables.
+- # So do it by hand here.
+- compiler_flags="$compiler_flags $add_flags"
+- # Only add it to commands which use CC, instead of LD, i.e.
+- # only to $compiler_flags
+- #linker_flags="$linker_flags $add_flags"
+-
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+- eval cmds=\"$module_expsym_cmds\"
++ eval test_cmds=\"$module_expsym_cmds\"
++ cmds=$module_expsym_cmds
+ else
+- eval cmds=\"$module_cmds\"
++ eval test_cmds=\"$module_cmds\"
++ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+- eval cmds=\"$archive_expsym_cmds\"
++ eval test_cmds=\"$archive_expsym_cmds\"
++ cmds=$archive_expsym_cmds
+ else
+- eval cmds=\"$archive_cmds\"
++ eval test_cmds=\"$archive_cmds\"
++ cmds=$archive_cmds
+ fi
+ fi
+
+- if test "X$skipped_export" != "X:" && len=`expr "X$cmds" : ".*"` &&
++ if test "X$skipped_export" != "X:" &&
++ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+@@ -3777,6 +4095,7 @@
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
++ output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+@@ -3786,13 +4105,13 @@
+ delfiles=
+ last_robj=
+ k=1
+- output=$output_objdir/$save_output-${k}.$objext
++ output=$output_objdir/$output_la-${k}.$objext
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+ if test "X$objlist" = X ||
+- { len=`expr "X$test_cmds" : ".*"` &&
++ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+ test "$len" -le "$max_cmd_len"; }; then
+ objlist="$objlist $obj"
+ else
+@@ -3806,9 +4125,9 @@
+ # the last one created.
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+ fi
+- last_robj=$output_objdir/$save_output-${k}.$objext
++ last_robj=$output_objdir/$output_la-${k}.$objext
+ k=`expr $k + 1`
+- output=$output_objdir/$save_output-${k}.$objext
++ output=$output_objdir/$output_la-${k}.$objext
+ objlist=$obj
+ len=1
+ fi
+@@ -3828,13 +4147,13 @@
+ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+ fi
+
+- # Set up a command to remove the reloadale object files
++ # Set up a command to remove the reloadable object files
+ # after they are used.
+ i=0
+ while test "$i" -lt "$k"
+ do
+ i=`expr $i + 1`
+- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
++ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+ done
+
+ $echo "creating a temporary reloadable object file: $output"
+@@ -3859,28 +4178,54 @@
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
++ if test "$module" = yes && test -n "$module_cmds" ; then
++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++ cmds=$module_expsym_cmds
++ else
++ cmds=$module_cmds
++ fi
++ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+- eval cmds=\"$archive_expsym_cmds\"
++ cmds=$archive_expsym_cmds
+ else
+- eval cmds=\"$archive_cmds\"
++ cmds=$archive_cmds
++ fi
+ fi
+
+ # Append the command to remove the reloadable object files
+ # to the just-reset $cmds.
+- eval cmds=\"\$cmds~$rm $delfiles\"
++ eval cmds=\"\$cmds~\$rm $delfiles\"
+ fi
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+- $run eval "$cmd" || exit $?
++ $run eval "$cmd" || {
++ lt_exit=$?
++
++ # Restore the uninstalled library and exit
++ if test "$mode" = relink; then
++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
++ fi
++
++ exit $lt_exit
++ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+- exit 0
++
++ if test -n "$convenience"; then
++ if test -z "$whole_archive_flag_spec"; then
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ fi
++ fi
++
++ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+@@ -3928,7 +4273,7 @@
+ *.lo)
+ if test -n "$objs$old_deplibs"; then
+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ libobj="$output"
+ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+@@ -3949,72 +4294,20 @@
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+- # -Wl from whole_archive_flag_spec
++ # -Wl from whole_archive_flag_spec and hope we can get by with
++ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
++ reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "$mkdir $gentop"
+- $run $mkdir "$gentop"
+- status=$?
+- if test "$status" -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
+ generated="$generated $gentop"
+
+- for xlib in $convenience; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "$mkdir $xdir"
+- $run $mkdir "$xdir"
+- status=$?
+- if test "$status" -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- # We will extract separately just the conflicting names and we will no
+- # longer touch any unique names. It is faster to leave these extract
+- # automatically by $AR in one run.
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
+- :
+- else
+- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+- $AR t "$xabs" | sort | uniq -cd | while read -r count name
+- do
+- i=1
+- while test "$i" -le "$count"
+- do
+- # Put our $i before any first dot (extension)
+- # Never overwrite any file
+- name_to="$name"
+- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
+- do
+- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+- done
+- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
+- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
+- i=`expr $i + 1`
+- done
+- done
+- fi
+-
+- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+- done
++ func_extract_archives $gentop $convenience
++ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+@@ -4022,10 +4315,11 @@
+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+- eval cmds=\"$reload_cmds\"
++ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -4038,7 +4332,7 @@
+ $run ${rm}r $gentop
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+@@ -4051,17 +4345,18 @@
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $run eval "echo timestamp > $libobj" || exit $?
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+- eval cmds=\"$reload_cmds\"
++ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -4073,7 +4368,7 @@
+ $run ${rm}r $gentop
+ fi
+
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+@@ -4098,24 +4393,50 @@
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
++ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ ;;
+ esac
+
+ case $host in
+- *-*-darwin*)
++ *darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ if test "$tagname" = CXX ; then
+ compile_command="$compile_command ${wl}-bind_at_load"
+ finalize_command="$finalize_command ${wl}-bind_at_load"
+ fi
+- # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
++
++ # move library search paths that coincide with paths to not yet
++ # installed libraries to the beginning of the library search list
++ new_libs=
++ for path in $notinst_path; do
++ case " $new_libs " in
++ *" -L$path/$objdir "*) ;;
++ *)
++ case " $compile_deplibs " in
++ *" -L$path/$objdir "*)
++ new_libs="$new_libs -L$path/$objdir" ;;
++ esac
++ ;;
++ esac
++ done
++ for deplib in $compile_deplibs; do
++ case $deplib in
++ -L*)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) new_libs="$new_libs $deplib" ;;
++ esac
++ ;;
++ *) new_libs="$new_libs $deplib" ;;
++ esac
++ done
++ compile_deplibs="$new_libs"
++
++
+ compile_command="$compile_command $compile_deplibs"
+ finalize_command="$finalize_command $finalize_deplibs"
+
+@@ -4160,10 +4481,15 @@
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$libdir";;
+ esac
++ case :$dllsearchpath: in
++ *":$testbindir:"*) ;;
++ *) dllsearchpath="$dllsearchpath:$testbindir";;
++ esac
+ ;;
+ esac
+ done
+@@ -4277,13 +4603,25 @@
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+- export_symbols="$output_objdir/$output.exp"
++ export_symbols="$output_objdir/$outputname.exp"
+ $run $rm $export_symbols
+- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++ case $host in
++ *cygwin* | *mingw* )
++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
++ ;;
++ esac
+ else
+- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
++ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
++ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ $run eval 'mv "$nlist"T "$nlist"'
++ case $host in
++ *cygwin* | *mingw* )
++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
++ ;;
++ esac
+ fi
+ fi
+
+@@ -4334,7 +4672,26 @@
+ #endif
+
+ /* The mapping between symbol names and symbols. */
++"
++
++ case $host in
++ *cygwin* | *mingw* )
++ $echo >> "$output_objdir/$dlsyms" "\
++/* DATA imports from DLLs on WIN32 can't be const, because
++ runtime relocations are performed -- see ld's documentation
++ on pseudo-relocs */
++struct {
++"
++ ;;
++ * )
++ $echo >> "$output_objdir/$dlsyms" "\
+ const struct {
++"
++ ;;
++ esac
++
++
++ $echo >> "$output_objdir/$dlsyms" "\
+ const char *name;
+ lt_ptr address;
+ }
+@@ -4381,20 +4738,33 @@
+ esac
+
+ # Now compile the dynamic symbol file.
+- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
++ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
++ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+ # Clean up the generated files.
+ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+ # Transform the symbol file into the correct name.
+- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ case $host in
++ *cygwin* | *mingw* )
++ if test -f "$output_objdir/${outputname}.def" ; then
++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
++ else
++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
++ fi
++ ;;
++ * )
++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
++ ;;
++ esac
+ ;;
+ *)
+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ else
+@@ -4403,30 +4773,19 @@
+ # really was required.
+
+ # Nullify the symbol file.
+- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+ fi
+
+- # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G
+- # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath.
+- # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld.
+- # This does not apply on AIX for ia64, which uses a SysV linker.
+- case "$host" in
+- ia64-*-aix5*) ;;
+- *-*-aix4* | *-*-aix5*)
+- compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"`
+- finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;;
+- esac
+-
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ # Replace the output file specification.
+- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ $show "$link_command"
+ $run eval "$link_command"
+- status=$?
++ exit_status=$?
+
+ # Delete the generated files.
+ if test -n "$dlsyms"; then
+@@ -4434,7 +4793,7 @@
+ $run $rm "$output_objdir/${outputname}S.${objext}"
+ fi
+
+- exit $status
++ exit $exit_status
+ fi
+
+ if test -n "$shlibpath_var"; then
+@@ -4493,7 +4852,7 @@
+ # Link the executable and exit
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+@@ -4507,7 +4866,7 @@
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
++ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+ else
+ # fast_install is set to needless
+ relink_command=
+@@ -4544,14 +4903,14 @@
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+ fi
+
+ # Quote $echo for shipping.
+- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+- case $0 in
+- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+- *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
++ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
++ case $progpath in
++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+ esac
+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+@@ -4573,11 +4932,13 @@
+ *) exeext= ;;
+ esac
+ case $host in
+- *mingw* )
+- cwrappersource=`$echo ${output_objdir}/lt-${outputname}.c`
+- cwrapper=`$echo ${output}.exe`
+- $rm $cwrappersource $cwrapper
+- trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
++ *cygwin* | *mingw* )
++ output_name=`basename $output`
++ output_path=`dirname $output`
++ cwrappersource="$output_path/$objdir/lt-$output_name.c"
++ cwrapper="$output_path/$output_name.exe"
++ $rm $cwrappersource $cwrapper
++ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ cat > $cwrappersource <<EOF
+
+@@ -4586,7 +4947,7 @@
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+-
++
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+
+@@ -4602,6 +4963,9 @@
+ #include <malloc.h>
+ #include <stdarg.h>
+ #include <assert.h>
++#include <string.h>
++#include <ctype.h>
++#include <sys/stat.h>
+
+ #if defined(PATH_MAX)
+ # define LT_PATHMAX PATH_MAX
+@@ -4612,15 +4976,19 @@
+ #endif
+
+ #ifndef DIR_SEPARATOR
+-#define DIR_SEPARATOR '/'
++# define DIR_SEPARATOR '/'
++# define PATH_SEPARATOR ':'
+ #endif
+
+ #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+-#define HAVE_DOS_BASED_FILE_SYSTEM
+-#ifndef DIR_SEPARATOR_2
+-#define DIR_SEPARATOR_2 '\\'
+-#endif
++# define HAVE_DOS_BASED_FILE_SYSTEM
++# ifndef DIR_SEPARATOR_2
++# define DIR_SEPARATOR_2 '\\'
++# endif
++# ifndef PATH_SEPARATOR_2
++# define PATH_SEPARATOR_2 ';'
++# endif
+ #endif
+
+ #ifndef DIR_SEPARATOR_2
+@@ -4630,17 +4998,32 @@
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+ #endif /* DIR_SEPARATOR_2 */
+
++#ifndef PATH_SEPARATOR_2
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
++#else /* PATH_SEPARATOR_2 */
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
++#endif /* PATH_SEPARATOR_2 */
++
+ #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+ #define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+ } while (0)
+
++/* -DDEBUG is fairly common in CFLAGS. */
++#undef DEBUG
++#if defined DEBUGWRAPPER
++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
++#else
++# define DEBUG(format, ...)
++#endif
++
+ const char *program_name = NULL;
+
+ void * xmalloc (size_t num);
+ char * xstrdup (const char *string);
+-char * basename (const char *name);
+-char * fnqualify(const char *path);
++const char * base_name (const char *name);
++char * find_executable(const char *wrapper);
++int check_executable(const char *path);
+ char * strendzap(char *str, const char *pat);
+ void lt_fatal (const char *message, ...);
+
+@@ -4649,30 +5032,52 @@
+ {
+ char **newargz;
+ int i;
+-
+- program_name = (char *) xstrdup ((char *) basename (argv[0]));
++
++ program_name = (char *) xstrdup (base_name (argv[0]));
++ DEBUG("(main) argv[0] : %s\n",argv[0]);
++ DEBUG("(main) program_name : %s\n",program_name);
+ newargz = XMALLOC(char *, argc+2);
+ EOF
+
+- cat >> $cwrappersource <<EOF
+- newargz[0] = "$SHELL";
++ cat >> $cwrappersource <<EOF
++ newargz[0] = (char *) xstrdup("$SHELL");
+ EOF
+
+- cat >> $cwrappersource <<"EOF"
+- newargz[1] = fnqualify(argv[0]);
++ cat >> $cwrappersource <<"EOF"
++ newargz[1] = find_executable(argv[0]);
++ if (newargz[1] == NULL)
++ lt_fatal("Couldn't find %s", argv[0]);
++ DEBUG("(main) found exe at : %s\n",newargz[1]);
+ /* we know the script has the same name, without the .exe */
+ /* so make sure newargz[1] doesn't end in .exe */
+- strendzap(newargz[1],".exe");
++ strendzap(newargz[1],".exe");
+ for (i = 1; i < argc; i++)
+ newargz[i+1] = xstrdup(argv[i]);
+ newargz[argc+1] = NULL;
++
++ for (i=0; i<argc+1; i++)
++ {
++ DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
++ ;
++ }
++
+ EOF
+
+- cat >> $cwrappersource <<EOF
++ case $host_os in
++ mingw*)
++ cat >> $cwrappersource <<EOF
++ execv("$SHELL",(char const **)newargz);
++EOF
++ ;;
++ *)
++ cat >> $cwrappersource <<EOF
+ execv("$SHELL",newargz);
+ EOF
++ ;;
++ esac
+
+- cat >> $cwrappersource <<"EOF"
++ cat >> $cwrappersource <<"EOF"
++ return 127;
+ }
+
+ void *
+@@ -4685,59 +5090,159 @@
+ return p;
+ }
+
+-char *
++char *
+ xstrdup (const char *string)
+ {
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+ ;
+ }
+
+-char *
+-basename (const char *name)
++const char *
++base_name (const char *name)
+ {
+ const char *base;
+
+ #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+- if (isalpha (name[0]) && name[1] == ':')
++ if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+ name += 2;
+ #endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+- return (char *) base;
++ return base;
++}
++
++int
++check_executable(const char * path)
++{
++ struct stat st;
++
++ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
++ if ((!path) || (!*path))
++ return 0;
++
++ if ((stat (path, &st) >= 0) &&
++ (
++ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
++#if defined (S_IXOTH)
++ ((st.st_mode & S_IXOTH) == S_IXOTH) ||
++#endif
++#if defined (S_IXGRP)
++ ((st.st_mode & S_IXGRP) == S_IXGRP) ||
++#endif
++ ((st.st_mode & S_IXUSR) == S_IXUSR))
++ )
++ return 1;
++ else
++ return 0;
+ }
+
+-char *
+-fnqualify(const char *path)
++/* Searches for the full path of the wrapper. Returns
++ newly allocated full path name if found, NULL otherwise */
++char *
++find_executable (const char* wrapper)
+ {
+- size_t size;
+- char *p;
++ int has_slash = 0;
++ const char* p;
++ const char* p_next;
++ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
++ int tmp_len;
++ char* concat_name;
++
++ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+- assert(path != NULL);
++ if ((wrapper == NULL) || (*wrapper == '\0'))
++ return NULL;
+
+- /* Is it qualified already? */
++ /* Absolute path? */
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
++ {
++ concat_name = xstrdup (wrapper);
++ if (check_executable(concat_name))
++ return concat_name;
++ XFREE(concat_name);
++ }
++ else
++ {
++#endif
++ if (IS_DIR_SEPARATOR (wrapper[0]))
++ {
++ concat_name = xstrdup (wrapper);
++ if (check_executable(concat_name))
++ return concat_name;
++ XFREE(concat_name);
++ }
+ #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+- if (isalpha (path[0]) && path[1] == ':')
+- return xstrdup (path);
++ }
+ #endif
+- if (IS_DIR_SEPARATOR (path[0]))
+- return xstrdup (path);
+
+- /* prepend the current directory */
+- /* doesn't handle '~' */
++ for (p = wrapper; *p; p++)
++ if (*p == '/')
++ {
++ has_slash = 1;
++ break;
++ }
++ if (!has_slash)
++ {
++ /* no slashes; search PATH */
++ const char* path = getenv ("PATH");
++ if (path != NULL)
++ {
++ for (p = path; *p; p = p_next)
++ {
++ const char* q;
++ size_t p_len;
++ for (q = p; *q; q++)
++ if (IS_PATH_SEPARATOR(*q))
++ break;
++ p_len = q - p;
++ p_next = (*q == '\0' ? q : q + 1);
++ if (p_len == 0)
++ {
++ /* empty path: current directory */
++ if (getcwd (tmp, LT_PATHMAX) == NULL)
++ lt_fatal ("getcwd failed");
++ tmp_len = strlen(tmp);
++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
++ memcpy (concat_name, tmp, tmp_len);
++ concat_name[tmp_len] = '/';
++ strcpy (concat_name + tmp_len + 1, wrapper);
++ }
++ else
++ {
++ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
++ memcpy (concat_name, p, p_len);
++ concat_name[p_len] = '/';
++ strcpy (concat_name + p_len + 1, wrapper);
++ }
++ if (check_executable(concat_name))
++ return concat_name;
++ XFREE(concat_name);
++ }
++ }
++ /* not found in PATH; assume curdir */
++ }
++ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+- size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
+- p = XMALLOC(char, size);
+- sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
+- return p;
++ tmp_len = strlen(tmp);
++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
++ memcpy (concat_name, tmp, tmp_len);
++ concat_name[tmp_len] = '/';
++ strcpy (concat_name + tmp_len + 1, wrapper);
++
++ if (check_executable(concat_name))
++ return concat_name;
++ XFREE(concat_name);
++ return NULL;
+ }
+
+ char *
+-strendzap(char *str, const char *pat)
++strendzap(char *str, const char *pat)
+ {
+ size_t len, patlen;
+
+@@ -4757,7 +5262,7 @@
+ }
+
+ static void
+-lt_error_core (int exit_status, const char * mode,
++lt_error_core (int exit_status, const char * mode,
+ const char * message, va_list ap)
+ {
+ fprintf (stderr, "%s: %s: ", program_name, mode);
+@@ -4777,16 +5282,16 @@
+ va_end (ap);
+ }
+ EOF
+- # we should really use a build-platform specific compiler
+- # here, but OTOH, the wrappers (shell script and this C one)
+- # are only useful if you want to execute the "real" binary.
+- # Since the "real" binary is built for $host, then this
+- # wrapper might as well be built for $host, too.
+- $run $LTCC -s -o $cwrapper $cwrappersource
+- ;;
+- esac
+- $rm $output
+- trap "$rm $output; exit 1" 1 2 15
++ # we should really use a build-platform specific compiler
++ # here, but OTOH, the wrappers (shell script and this C one)
++ # are only useful if you want to execute the "real" binary.
++ # Since the "real" binary is built for $host, then this
++ # wrapper might as well be built for $host, too.
++ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
++ ;;
++ esac
++ $rm $output
++ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+ $echo > $output "\
+ #! $SHELL
+@@ -4805,9 +5310,23 @@
+ Xsed='${SED} -e 1s/^X//'
+ sed_quote_subst='$sed_quote_subst'
+
++# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '\${1+\"\$@\"}'='\"\$@\"'
++ setopt NO_GLOB_SUBST
++else
++ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
++fi
++BIN_SH=xpg4; export BIN_SH # for Tru64
++DUALCASE=1; export DUALCASE # for MKS sh
++
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+ relink_command=\"$relink_command\"
+
+@@ -4886,7 +5405,7 @@
+ else
+ $echo \"\$relink_command_output\" >&2
+ $rm \"\$progdir/\$file\"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi
+
+@@ -4936,34 +5455,32 @@
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2*)
+ $echo >> $output "\
+- exec \$progdir\\\\\$program \${1+\"\$@\"}
++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+ "
+ ;;
+
+ *)
+- # Need to set LD_LIBRARY_PATH, to the value already
+- # computed within libtool.
+ $echo >> $output "\
+- LD_LIBRARY_PATH=\"$rpath\" exec \$progdir/\$program \${1+\"\$@\"}
++ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+ "
+ ;;
+ esac
+ $echo >> $output "\
+- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+- exit 1
++ \$echo \"\$0: cannot exec \$program \$*\"
++ exit $EXIT_FAILURE
+ fi
+ else
+ # The program doesn't exist.
+- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
++ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$echo \"This script is just a wrapper for \$program.\" 1>&2
+ $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi\
+ "
+ chmod +x $output
+ fi
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+@@ -4986,78 +5503,78 @@
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+- $show "${rm}r $gentop"
+- $run ${rm}r "$gentop"
+- $show "$mkdir $gentop"
+- $run $mkdir "$gentop"
+- status=$?
+- if test "$status" -ne 0 && test ! -d "$gentop"; then
+- exit $status
+- fi
+ generated="$generated $gentop"
+
+- # Add in members from convenience archives.
+- for xlib in $addlibs; do
+- # Extract the objects.
+- case $xlib in
+- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+- *) xabs=`pwd`"/$xlib" ;;
+- esac
+- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+- xdir="$gentop/$xlib"
+-
+- $show "${rm}r $xdir"
+- $run ${rm}r "$xdir"
+- $show "$mkdir $xdir"
+- $run $mkdir "$xdir"
+- status=$?
+- if test "$status" -ne 0 && test ! -d "$xdir"; then
+- exit $status
+- fi
+- # We will extract separately just the conflicting names and we will no
+- # longer touch any unique names. It is faster to leave these extract
+- # automatically by $AR in one run.
+- $show "(cd $xdir && $AR x $xabs)"
+- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
+- :
+- else
+- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+- $AR t "$xabs" | sort | uniq -cd | while read -r count name
+- do
+- i=1
+- while test "$i" -le "$count"
+- do
+- # Put our $i before any first dot (extension)
+- # Never overwrite any file
+- name_to="$name"
+- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
+- do
+- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+- done
+- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
+- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
+- i=`expr $i + 1`
+- done
+- done
+- fi
+-
+- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+- done
++ func_extract_archives $gentop $addlibs
++ oldobjs="$oldobjs $func_extract_archives_result"
+ fi
+
+- compiler_flags="$compiler_flags $add_flags"
+-
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+- eval cmds=\"$old_archive_from_new_cmds\"
++ cmds=$old_archive_from_new_cmds
+ else
++ # POSIX demands no paths to be encoded in archives. We have
++ # to avoid creating archives with duplicate basenames if we
++ # might have to extract them afterwards, e.g., when creating a
++ # static archive out of a convenience library, or when linking
++ # the entirety of a libtool archive into another (currently
++ # not supported by libtool).
++ if (for obj in $oldobjs
++ do
++ $echo "X$obj" | $Xsed -e 's%^.*/%%'
++ done | sort | sort -uc >/dev/null 2>&1); then
++ :
++ else
++ $echo "copying selected object files to avoid basename conflicts..."
++
++ if test -z "$gentop"; then
++ gentop="$output_objdir/${outputname}x"
++ generated="$generated $gentop"
++
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ $show "$mkdir $gentop"
++ $run $mkdir "$gentop"
++ exit_status=$?
++ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
++ exit $exit_status
++ fi
++ fi
++
++ save_oldobjs=$oldobjs
++ oldobjs=
++ counter=1
++ for obj in $save_oldobjs
++ do
++ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
++ case " $oldobjs " in
++ " ") oldobjs=$obj ;;
++ *[\ /]"$objbase "*)
++ while :; do
++ # Make sure we don't pick an alternate name that also
++ # overlaps.
++ newobj=lt$counter-$objbase
++ counter=`expr $counter + 1`
++ case " $oldobjs " in
++ *[\ /]"$newobj "*) ;;
++ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
++ esac
++ done
++ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
++ $run ln "$obj" "$gentop/$newobj" ||
++ $run cp "$obj" "$gentop/$newobj"
++ oldobjs="$oldobjs $gentop/$newobj"
++ ;;
++ *) oldobjs="$oldobjs $obj" ;;
++ esac
++ done
++ fi
++
+ eval cmds=\"$old_archive_cmds\"
+
+ if len=`expr "X$cmds" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+- :
++ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ $echo "using piecewise archive linking..."
+@@ -5066,31 +5583,18 @@
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+- # GNU ar 2.10+ was changed to match POSIX; thus no paths are
+- # encoded into archives. This makes 'ar r' malfunction in
+- # this piecewise linking case whenever conflicting object
+- # names appear in distinct ar calls; check, warn and compensate.
+- if (for obj in $save_oldobjs
+- do
+- $echo "X$obj" | $Xsed -e 's%^.*/%%'
+- done | sort | sort -uc >/dev/null 2>&1); then
+- :
+- else
+- $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
+- $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
+- AR_FLAGS=cq
+- fi
++
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+- done
++ done
+ for obj in $save_oldobjs
+ do
+ oldobjs="$objlist $obj"
+ objlist="$objlist $obj"
+ eval test_cmds=\"$old_archive_cmds\"
+- if len=`expr "X$test_cmds" : ".*"` &&
++ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+ test "$len" -le "$max_cmd_len"; then
+ :
+ else
+@@ -5098,7 +5602,7 @@
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+- fi
++ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+@@ -5109,12 +5613,13 @@
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+- eval cmds=\"\$concat_cmds~$old_archive_cmds\"
++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
++ eval cmd=\"$cmd\"
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+@@ -5146,11 +5651,13 @@
+ fi
+ done
+ # Quote the link command for shipping.
+- relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
+- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
++ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+ if test "$hardcode_automatic" = yes ; then
+- relink_command=
+- fi
++ relink_command=
++ fi
++
++
+ # Only create the output if not a dry run.
+ if test -z "$run"; then
+ for installed in no yes; do
+@@ -5168,7 +5675,7 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdependency_libs="$newdependency_libs $libdir/$name"
+ ;;
+@@ -5182,7 +5689,7 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdlfiles="$newdlfiles $libdir/$name"
+ done
+@@ -5193,11 +5700,30 @@
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ newdlprefiles="$newdlprefiles $libdir/$name"
+ done
+ dlprefiles="$newdlprefiles"
++ else
++ newdlfiles=
++ for lib in $dlfiles; do
++ case $lib in
++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++ *) abs=`pwd`"/$lib" ;;
++ esac
++ newdlfiles="$newdlfiles $abs"
++ done
++ dlfiles="$newdlfiles"
++ newdlprefiles=
++ for lib in $dlprefiles; do
++ case $lib in
++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++ *) abs=`pwd`"/$lib" ;;
++ esac
++ newdlprefiles="$newdlprefiles $abs"
++ done
++ dlprefiles="$newdlprefiles"
+ fi
+ $rm $output
+ # place dlname in correct position for cygwin
+@@ -5241,7 +5767,7 @@
+
+ # Directory that this library needs to be installed in:
+ libdir='$install_libdir'"
+- if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then
++ if test "$installed" = no && test "$need_relink" = yes; then
+ $echo >> $output "\
+ relink_command=\"$relink_command\""
+ fi
+@@ -5254,7 +5780,7 @@
+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+ ;;
+ esac
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool install mode
+@@ -5265,11 +5791,11 @@
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
++ $echo "X$nonopt" | grep shtool > /dev/null; then
+ # Aesthetically quote it.
+ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+@@ -5278,14 +5804,14 @@
+ shift
+ else
+ install_prog=
+- arg="$nonopt"
++ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+@@ -5303,28 +5829,31 @@
+ do
+ if test -n "$dest"; then
+ files="$files $dest"
+- dest="$arg"
++ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+- -f) prev="-f" ;;
+- -g) prev="-g" ;;
+- -m) prev="-m" ;;
+- -o) prev="-o" ;;
++ -f)
++ case " $install_prog " in
++ *[\\\ /]cp\ *) ;;
++ *) prev=$arg ;;
++ esac
++ ;;
++ -g | -m | -o) prev=$arg ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+- -*) ;;
+-
++ -*)
++ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+- dest="$arg"
++ dest=$arg
+ continue
+ fi
+ ;;
+@@ -5333,7 +5862,7 @@
+ # Aesthetically quote the argument.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+@@ -5343,13 +5872,13 @@
+ if test -z "$install_prog"; then
+ $echo "$modename: you must specify an install program" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prev' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -z "$files"; then
+@@ -5359,7 +5888,7 @@
+ $echo "$modename: you must specify a destination" 1>&2
+ fi
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Strip any trailing slash from the destination.
+@@ -5380,7 +5909,7 @@
+ if test "$#" -gt 2; then
+ $echo "$modename: \`$dest' is not a directory" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi
+ case $destdir in
+@@ -5392,7 +5921,7 @@
+ *)
+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+ done
+@@ -5421,7 +5950,7 @@
+ else
+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ library_names=
+@@ -5463,14 +5992,14 @@
+ # but it's something to keep an eye on.
+ if test "$inst_prefix_dir" = "$destdir"; then
+ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+ else
+- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
++ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+ fi
+
+ $echo "$modename: warning: relinking \`$file'" 1>&2
+@@ -5478,7 +6007,7 @@
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi
+
+@@ -5502,23 +6031,36 @@
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
++ # Try `ln -sf' first, because the `ln' binary might depend on
++ # the symlink we replace! Solaris /bin/ln does not understand -f,
++ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ if test "$linkname" != "$realname"; then
+- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
++ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
++ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+ fi
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+- eval cmds=\"$postinstall_cmds\"
++ cmds=$postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+- $run eval "$cmd" || exit $?
++ $run eval "$cmd" || {
++ lt_exit=$?
++
++ # Restore the uninstalled library and exit
++ if test "$mode" = relink; then
++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
++ fi
++
++ exit $lt_exit
++ }
+ done
+ IFS="$save_ifs"
+ fi
+@@ -5556,7 +6098,7 @@
+ *)
+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+@@ -5574,7 +6116,7 @@
+ $show "$install_prog $staticobj $staticdest"
+ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+ fi
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+@@ -5612,23 +6154,21 @@
+ notinst_deplibs=
+ relink_command=
+
+- # To insure that "foo" is sourced, and not "foo.exe",
+- # finese the cygwin/MSYS system by explicitly sourcing "foo."
+- # which disallows the automatic-append-.exe behavior.
+- case $build in
+- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
+- *) wrapperdot=${wrapper} ;;
+- esac
++ # Note that it is not necessary on cygwin/mingw to append a dot to
++ # foo even if both foo and FILE.exe exist: automatic-append-.exe
++ # behavior happens only for exec(3), not for open(2)! Also, sourcing
++ # `FILE.' does not work on cygwin managed mounts.
++ #
+ # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . ${wrapperdot} ;;
+- *) . ./${wrapperdot} ;;
++ case $wrapper in
++ */* | *\\*) . ${wrapper} ;;
++ *) . ./${wrapper} ;;
+ esac
+
+ # Check the variables that should have been set.
+ if test -z "$notinst_deplibs"; then
+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ finalize=yes
+@@ -5650,34 +6190,25 @@
+ done
+
+ relink_command=
+- # To insure that "foo" is sourced, and not "foo.exe",
+- # finese the cygwin/MSYS system by explicitly sourcing "foo."
+- # which disallows the automatic-append-.exe behavior.
+- case $build in
+- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
+- *) wrapperdot=${wrapper} ;;
+- esac
++ # Note that it is not necessary on cygwin/mingw to append a dot to
++ # foo even if both foo and FILE.exe exist: automatic-append-.exe
++ # behavior happens only for exec(3), not for open(2)! Also, sourcing
++ # `FILE.' does not work on cygwin managed mounts.
++ #
+ # If there is no directory component, then add one.
+- case $file in
+- */* | *\\*) . ${wrapperdot} ;;
+- *) . ./${wrapperdot} ;;
++ case $wrapper in
++ */* | *\\*) . ${wrapper} ;;
++ *) . ./${wrapper} ;;
+ esac
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ if test "$finalize" = yes && test -z "$run"; then
+- tmpdir="/tmp"
+- test -n "$TMPDIR" && tmpdir="$TMPDIR"
+- tmpdir="$tmpdir/libtool-$$"
+- if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then :
+- else
+- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+- continue
+- fi
++ tmpdir=`func_mktempdir`
+ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
++ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
+
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+@@ -5697,7 +6228,7 @@
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+- # one anyways
++ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+@@ -5729,16 +6260,17 @@
+ $show "$install_prog $file $oldlib"
+ $run eval "$install_prog \$file \$oldlib" || exit $?
+
+- if test -n "$stripme" && test -n "$striplib"; then
++ if test -n "$stripme" && test -n "$old_striplib"; then
+ $show "$old_striplib $oldlib"
+ $run eval "$old_striplib $oldlib" || exit $?
+ fi
+
+ # Do each command in the postinstall commands.
+- eval cmds=\"$old_postinstall_cmds\"
++ cmds=$old_postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+@@ -5752,9 +6284,9 @@
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ test -n "$run" && current_libdirs=" -n$current_libdirs"
+- exec_cmd='$SHELL $0 --finish$current_libdirs'
++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+ ;;
+
+@@ -5773,10 +6305,11 @@
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+- eval cmds=\"$finish_cmds\"
++ cmds=$finish_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || admincmds="$admincmds
+ $cmd"
+@@ -5793,9 +6326,9 @@
+ fi
+
+ # Exit here if they wanted silent mode.
+- exit 0
++ test "$show" = : && exit $EXIT_SUCCESS
+
+- $echo "----------------------------------------------------------------------"
++ $echo "X----------------------------------------------------------------------" | $Xsed
+ $echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $echo " $libdir"
+@@ -5828,8 +6361,8 @@
+ $echo
+ $echo "See any operating system documentation about shared libraries for"
+ $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+- $echo "----------------------------------------------------------------------"
+- exit 0
++ $echo "X----------------------------------------------------------------------" | $Xsed
++ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool execute mode
+@@ -5841,7 +6374,7 @@
+ if test -z "$cmd"; then
+ $echo "$modename: you must specify a COMMAND" 1>&2
+ $echo "$help"
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Handle -dlopen flags immediately.
+@@ -5849,7 +6382,7 @@
+ if test ! -f "$file"; then
+ $echo "$modename: \`$file' is not a file" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ dir=
+@@ -5860,7 +6393,7 @@
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # Read the libtool library.
+@@ -5886,8 +6419,10 @@
+ if test -f "$dir/$objdir/$dlname"; then
+ dir="$dir/$objdir"
+ else
+- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+- exit 1
++ if test ! -f "$dir/$dlname"; then
++ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
++ exit $EXIT_FAILURE
++ fi
+ fi
+ ;;
+
+@@ -5951,12 +6486,12 @@
+ fi
+
+ # Restore saved environment variables
+- if test "${save_LC_ALL+set}" = set; then
+- LC_ALL="$save_LC_ALL"; export LC_ALL
+- fi
+- if test "${save_LANG+set}" = set; then
+- LANG="$save_LANG"; export LANG
+- fi
++ for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++ do
++ eval "if test \"\${save_$lt_var+set}\" = set; then
++ $lt_var=\$save_$lt_var; export $lt_var
++ fi"
++ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+@@ -5967,7 +6502,7 @@
+ $echo "export $shlibpath_var"
+ fi
+ $echo "$cmd$args"
+- exit 0
++ exit $EXIT_SUCCESS
+ fi
+ ;;
+
+@@ -5995,7 +6530,7 @@
+ if test -z "$rm"; then
+ $echo "$modename: you must specify an RM program" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ rmdirs=
+@@ -6045,15 +6580,24 @@
+ rmfiles="$rmfiles $objdir/$n"
+ done
+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+
+- if test "$mode" = uninstall; then
++ case "$mode" in
++ clean)
++ case " $library_names " in
++ # " " in the beginning catches empty $dlname
++ *" $dlname "*) ;;
++ *) rmfiles="$rmfiles $objdir/$dlname" ;;
++ esac
++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++ ;;
++ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+- eval cmds=\"$postuninstall_cmds\"
++ cmds=$postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd"
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
+@@ -6065,10 +6609,11 @@
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+- eval cmds=\"$old_postuninstall_cmds\"
++ cmds=$old_postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd"
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
+@@ -6078,7 +6623,8 @@
+ IFS="$save_ifs"
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+- fi
++ ;;
++ esac
+ fi
+ ;;
+
+@@ -6107,7 +6653,7 @@
+ if test "$mode" = clean ; then
+ noexename=$name
+ case $file in
+- *.exe)
++ *.exe)
+ file=`$echo $file|${SED} 's,.exe$,,'`
+ noexename=`$echo $name|${SED} 's,.exe$,,'`
+ # $file with .exe has already been added to rmfiles,
+@@ -6152,20 +6698,20 @@
+ "")
+ $echo "$modename: you must specify a MODE" 1>&2
+ $echo "$generic_help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ if test -z "$exec_cmd"; then
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$generic_help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+ fi # test -z "$show_help"
+
+ if test -n "$exec_cmd"; then
+ eval exec $exec_cmd
+- exit 1
++ exit $EXIT_FAILURE
+ fi
+
+ # We need to display help for each of the modes.
+@@ -6201,7 +6747,7 @@
+ a more detailed description of MODE.
+
+ Report bugs to <bug-libtool at gnu.org>."
+- exit 0
++ exit $EXIT_SUCCESS
+ ;;
+
+ clean)
+@@ -6302,9 +6848,9 @@
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+- try to export only the symbols listed in SYMFILE
++ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+- try to export only the symbols matching REGEX
++ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+@@ -6313,12 +6859,16 @@
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
++ -precious-files-regex REGEX
++ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+- -static do not do any dynamic linking of libtool libraries
++ -static do not do any dynamic linking of uninstalled libtool libraries
++ -static-libtool-libs
++ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+- specify library version info [each variable defaults to 0]
++ specify library version info [each variable defaults to 0]
+
+ All other options (arguments beginning with \`-') are ignored.
+
+@@ -6354,14 +6904,14 @@
+ *)
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$help" 1>&2
+- exit 1
++ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ $echo
+ $echo "Try \`$modename --help' for more information about other modes."
+
+-exit 0
++exit $?
+
+ # The TAGs below are defined such that we never get into a situation
+ # in which we disable both kinds of libraries. Given conflicting
+@@ -6375,12 +6925,11 @@
+ # configuration. But we'll never go from static-only to shared-only.
+
+ # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+-build_libtool_libs=no
+-build_old_libs=yes
++disable_libs=shared
+ # ### END LIBTOOL TAG CONFIG: disable-shared
+
+ # ### BEGIN LIBTOOL TAG CONFIG: disable-static
+-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
++disable_libs=static
+ # ### END LIBTOOL TAG CONFIG: disable-static
+
+ # Local Variables:
Added: kde-extras/kmymoney2/trunk/debian/patches/04_am_maintainer_mode.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/04_am_maintainer_mode.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/04_am_maintainer_mode.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,11 @@
+--- a/admin/configure.in.min
++++ b/admin/configure.in.min
+@@ -38,6 +38,8 @@
+ dnl Automake doc recommends to do this only here. (Janos)
+ AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs
+
++AM_MAINTAINER_MODE
++
+ KDE_SET_PREFIX
+
+ dnl generate the config header
Added: kde-extras/kmymoney2/trunk/debian/patches/05_pedantic-errors.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/05_pedantic-errors.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/05_pedantic-errors.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,12 @@
+--- a/admin/acinclude.m4.in
++++ b/admin/acinclude.m4.in
+@@ -2168,9 +2168,6 @@
+ save_CXXFLAGS="$CXXFLAGS"
+ kde_safe_LIBS="$LIBS"
+ LIBS="$LIBS $X_EXTRA_LIBS"
+-if test "$GXX" = "yes"; then
+-CXXFLAGS="$CXXFLAGS -pedantic-errors"
+-fi
+ AC_TRY_COMPILE([
+ $2
+ ],
Added: kde-extras/kmymoney2/trunk/debian/patches/06_disable_no_undefined.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/06_disable_no_undefined.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/06_disable_no_undefined.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,18 @@
+--- a/admin/acinclude.m4.in
++++ b/admin/acinclude.m4.in
+@@ -1713,15 +1713,6 @@
+ KDE_USE_CLOSURE_TRUE="#"
+ KDE_USE_CLOSURE_FALSE=""
+ KDE_NO_UNDEFINED=""
+- case $host in
+- *-*-linux-gnu)
+- KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined],
+- [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined],
+- [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"],
+- [KDE_NO_UNDEFINED=""])],
+- [KDE_NO_UNDEFINED=""])
+- ;;
+- esac
+ fi
+ AC_SUBST(KDE_USE_CLOSURE_TRUE)
+ AC_SUBST(KDE_USE_CLOSURE_FALSE)
Added: kde-extras/kmymoney2/trunk/debian/patches/07_ofximport_ldflags.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/07_ofximport_ldflags.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/07_ofximport_ldflags.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,11 @@
+--- a/kmymoney2/plugins/ofximport/Makefile.am
++++ b/kmymoney2/plugins/ofximport/Makefile.am
+@@ -15,7 +15,7 @@
+ # LD flags for the plugin
+ # -module says: this is a module, i.e. something you're going to dlopen
+ # so e.g. it has no version number like a normal shared lib would have.
+-kmm_ofximport_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries) $(LIB_KDECORE) $(LIB_QT)
++kmm_ofximport_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries) $(LIB_KDECORE) $(LIB_QT) -L../.libs
+
+ # Install the desktop file needed to detect the plugin
+ kde_services_DATA = kmm_ofximport.desktop
Added: kde-extras/kmymoney2/trunk/debian/patches/08_remove_deprecated_miniicon.diff
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/08_remove_deprecated_miniicon.diff (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/08_remove_deprecated_miniicon.diff 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,9 @@
+--- a/kmymoney2/kmymoney2.desktop
++++ b/kmymoney2/kmymoney2.desktop
+@@ -15,6 +15,5 @@
+ Type=Application
+ DocPath=kmymoney2/index.html
+ Icon=kmymoney2
+-MiniIcon=kmymoney2
+ ServiceTypes=
+ Categories=Office;Finance
Added: kde-extras/kmymoney2/trunk/debian/patches/98_buildprep.diff
===================================================================
Added: kde-extras/kmymoney2/trunk/debian/patches/series
===================================================================
--- kde-extras/kmymoney2/trunk/debian/patches/series (rev 0)
+++ kde-extras/kmymoney2/trunk/debian/patches/series 2008-01-19 23:12:25 UTC (rev 9048)
@@ -0,0 +1,10 @@
+00_admin_dir_update.diff
+01_libtool.m4.in_update.diff
+02_autotools_update.diff
+03_libtool_update.diff
+04_am_maintainer_mode.diff
+05_pedantic-errors.diff
+06_disable_no_undefined.diff
+07_ofximport_ldflags.diff
+08_remove_deprecated_miniicon.diff
+98_buildprep.diff
Modified: kde-extras/kmymoney2/trunk/debian/rules
===================================================================
--- kde-extras/kmymoney2/trunk/debian/rules 2008-01-19 18:01:34 UTC (rev 9047)
+++ kde-extras/kmymoney2/trunk/debian/rules 2008-01-19 23:12:25 UTC (rev 9048)
@@ -1,11 +1,16 @@
#!/usr/bin/make -f
-export LDFLAGS = -lkdeui
-
include /usr/share/cdbs/1/rules/debhelper.mk
include /usr/share/cdbs/1/class/kde.mk
-include /usr/share/cdbs/1/rules/simple-patchsys.mk
+include /usr/share/cdbs/1/rules/patchsys-quilt.mk
+include /usr/share/cdbs/1/rules/utils.mk
+DEB_CONFIGURE_SCRIPT_ENV += LDFLAGS="-lkdeui -Wl,--as-needed"
+
install/kmymoney2::
install -D -p -m0644 debian/kmymoney2.lintian-overrides \
- debian/kmymoney2/usr/share/lintian/overrides/kmymoney2
+ debian/kmymoney2/usr/share/lintian/overrides/kmymoney2
+
+clean::
+ find po -type f -name '*.gmo' | xargs rm -f
+
More information about the pkg-kde-commits
mailing list