[pkg-lighttpd] r544 - in lighttpd/trunk: . debian doc doc/config doc/config/conf.d doc/config/vhosts.d doc/initscripts doc/scripts m4 src tests tests/docroot tests/docroot/123 tests/docroot/www tests/docroot/www/expire tests/docroot/www/go tests/docroot/www/indexfile
Arno Töll
atoell-guest at alioth.debian.org
Sun Jul 3 23:55:39 UTC 2011
Author: atoell-guest
Date: 2011-07-03 23:55:35 +0000 (Sun, 03 Jul 2011)
New Revision: 544
Added:
lighttpd/trunk/doc/outdated/
lighttpd/trunk/src/fdevent_solaris_port.c
Removed:
lighttpd/trunk/doc/access.txt
lighttpd/trunk/doc/accesslog.txt
lighttpd/trunk/doc/alias.txt
lighttpd/trunk/doc/authentication.txt
lighttpd/trunk/doc/cgi.txt
lighttpd/trunk/doc/cml.txt
lighttpd/trunk/doc/compress.txt
lighttpd/trunk/doc/configuration.txt
lighttpd/trunk/doc/dirlisting.txt
lighttpd/trunk/doc/evhost.txt
lighttpd/trunk/doc/expire.txt
lighttpd/trunk/doc/extforward.txt
lighttpd/trunk/doc/fastcgi-state.dot
lighttpd/trunk/doc/fastcgi-state.txt
lighttpd/trunk/doc/fastcgi.txt
lighttpd/trunk/doc/features.txt
lighttpd/trunk/doc/magnet.txt
lighttpd/trunk/doc/mysqlvhost.txt
lighttpd/trunk/doc/performance.txt
lighttpd/trunk/doc/plugins.txt
lighttpd/trunk/doc/proxy.txt
lighttpd/trunk/doc/redirect.txt
lighttpd/trunk/doc/rewrite.txt
lighttpd/trunk/doc/rrdtool.txt
lighttpd/trunk/doc/scgi.txt
lighttpd/trunk/doc/secdownload.txt
lighttpd/trunk/doc/security.txt
lighttpd/trunk/doc/setenv.txt
lighttpd/trunk/doc/simple-vhost.txt
lighttpd/trunk/doc/skeleton.txt
lighttpd/trunk/doc/ssi.txt
lighttpd/trunk/doc/ssl.txt
lighttpd/trunk/doc/state.dot
lighttpd/trunk/doc/state.txt
lighttpd/trunk/doc/status.txt
lighttpd/trunk/doc/traffic-shaping.txt
lighttpd/trunk/doc/trigger_b4_dl.txt
lighttpd/trunk/doc/userdir.txt
lighttpd/trunk/doc/webdav.txt
Modified:
lighttpd/trunk/Makefile.in
lighttpd/trunk/NEWS
lighttpd/trunk/README
lighttpd/trunk/SConstruct
lighttpd/trunk/aclocal.m4
lighttpd/trunk/config.h.in
lighttpd/trunk/configure
lighttpd/trunk/configure.ac
lighttpd/trunk/debian/changelog
lighttpd/trunk/debian/control
lighttpd/trunk/doc/Makefile.am
lighttpd/trunk/doc/Makefile.in
lighttpd/trunk/doc/config/Makefile.in
lighttpd/trunk/doc/config/conf.d/Makefile.in
lighttpd/trunk/doc/config/vhosts.d/Makefile.in
lighttpd/trunk/doc/initscripts/Makefile.in
lighttpd/trunk/doc/scripts/Makefile.in
lighttpd/trunk/ltmain.sh
lighttpd/trunk/m4/libtool.m4
lighttpd/trunk/m4/ltoptions.m4
lighttpd/trunk/m4/ltversion.m4
lighttpd/trunk/m4/lt~obsolete.m4
lighttpd/trunk/src/Makefile.am
lighttpd/trunk/src/Makefile.in
lighttpd/trunk/src/base.h
lighttpd/trunk/src/configfile.c
lighttpd/trunk/src/connections.c
lighttpd/trunk/src/fdevent.c
lighttpd/trunk/src/fdevent.h
lighttpd/trunk/src/http_auth.c
lighttpd/trunk/src/http_auth_digest.c
lighttpd/trunk/src/md5.c
lighttpd/trunk/src/md5.h
lighttpd/trunk/src/mod_cgi.c
lighttpd/trunk/src/mod_cml_funcs.c
lighttpd/trunk/src/mod_cml_lua.c
lighttpd/trunk/src/mod_fastcgi.c
lighttpd/trunk/src/mod_proxy.c
lighttpd/trunk/src/mod_scgi.c
lighttpd/trunk/src/mod_secure_download.c
lighttpd/trunk/src/mod_status.c
lighttpd/trunk/src/mod_usertrack.c
lighttpd/trunk/src/network.c
lighttpd/trunk/src/proc_open.c
lighttpd/trunk/src/server.c
lighttpd/trunk/tests/Makefile.in
lighttpd/trunk/tests/condition.conf
lighttpd/trunk/tests/core-condition.t
lighttpd/trunk/tests/docroot/123/Makefile.in
lighttpd/trunk/tests/docroot/Makefile.in
lighttpd/trunk/tests/docroot/www/Makefile.in
lighttpd/trunk/tests/docroot/www/expire/Makefile.in
lighttpd/trunk/tests/docroot/www/go/Makefile.in
lighttpd/trunk/tests/docroot/www/indexfile/Makefile.in
lighttpd/trunk/tests/request.t
Log:
Import 1.4.29
Modified: lighttpd/trunk/Makefile.in
===================================================================
--- lighttpd/trunk/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -130,6 +130,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -163,6 +164,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -206,6 +208,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -238,7 +241,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/NEWS
===================================================================
--- lighttpd/trunk/NEWS 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/NEWS 2011-07-03 23:55:35 UTC (rev 544)
@@ -3,7 +3,22 @@
NEWS
====
-- 1.4.28 -
+- 1.4.29 -
+ * Fix mod_proxy waiting for response even if content-length is 0 (fixes #2259)
+ * Silence annoying "connection closed: poll() -> ERR" error.log message (fixes #2257)
+ * mod_cgi: make read buffer as big as incoming data block
+ * [build] Fix detection of libev (fixes #2300)
+ * ssl: Support for Diffie-Hellman and Elliptic-Curve Diffie-Hellman key exchange (fixes #2301)
+ add ssl.use-sslv3 (fixes #2246)
+ load all algorithms (fixes #2239)
+ * [ssl/md5] prefix our own md5 implementation with li_ so it doesn't conflict with the openssl one (fixes #2269)
+ * [ssl/build] some minor fixes; fix compile without ssl, cleanup ssl config buffers
+ * [proc,include_shell] log error if exec shell fails (fixes #2280)
+ * [*cgi] Use physical base dir (alias, userdir) as DOCUMENT_ROOT in cgi environments (fixes #2216)
+ * [doc] Move docs to outdated/ subdir and refer to wiki instead (fixes #2248)
+ * fdevent: add solaris eventports (fixes #2171)
+
+- 1.4.28 - 2010-08-22
* Rename fdevent_event_add to _set to reflect what the function does. Fix some handlers. (fixes #2249)
* Fix buffer.h to include stdio.h as it is needer for SEGFAULT() (fixes #2250)
Modified: lighttpd/trunk/README
===================================================================
--- lighttpd/trunk/README 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/README 2011-07-03 23:55:35 UTC (rev 544)
@@ -19,6 +19,9 @@
URL-Rewriting and many more) make lighttpd the perfect webserver-software
for every server that is suffering load problems.
+:documentation:
+ http://wiki.lighttpd.net/
+
the naming
----------
Modified: lighttpd/trunk/SConstruct
===================================================================
--- lighttpd/trunk/SConstruct 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/SConstruct 2011-07-03 23:55:35 UTC (rev 544)
@@ -5,7 +5,7 @@
from stat import *
package = 'lighttpd'
-version = '1.4.28'
+version = '1.4.29'
def checkCHeaders(autoconf, hdrs):
p = re.compile('[^A-Z0-9]')
Modified: lighttpd/trunk/aclocal.m4
===================================================================
--- lighttpd/trunk/aclocal.m4 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/aclocal.m4 2011-07-03 23:55:35 UTC (rev 544)
@@ -13,8 +13,8 @@
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
-[m4_warning([this file was generated for autoconf 2.67.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.])])
@@ -47,7 +47,8 @@
# ----------------------------------
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
@@ -93,7 +94,8 @@
pkg_cv_[]$1="$$1"
elif test -n "$PKG_CONFIG"; then
PKG_CHECK_EXISTS([$3],
- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes ],
[pkg_failed=yes])
else
pkg_failed=untried
@@ -141,9 +143,9 @@
AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
else
- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
@@ -156,7 +158,7 @@
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
-_PKG_TEXT])dnl
+_PKG_TEXT])[]dnl
])
elif test $pkg_failed = untried; then
AC_MSG_RESULT([no])
@@ -167,7 +169,7 @@
_PKG_TEXT
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])dnl
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
Modified: lighttpd/trunk/config.h.in
===================================================================
--- lighttpd/trunk/config.h.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/config.h.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -198,6 +198,9 @@
/* Define to 1 if you have the `port_create' function. */
#undef HAVE_PORT_CREATE
+/* Define to 1 if you have the <port.h> header file. */
+#undef HAVE_PORT_H
+
/* Define to 1 if you have the `posix_fadvise' function. */
#undef HAVE_POSIX_FADVISE
@@ -304,9 +307,6 @@
/* Define to 1 if you have the <sys/poll.h> header file. */
#undef HAVE_SYS_POLL_H
-/* Define to 1 if you have the <sys/port.h> header file. */
-#undef HAVE_SYS_PORT_H
-
/* Define to 1 if you have the <sys/prctl.h> header file. */
#undef HAVE_SYS_PRCTL_H
Modified: lighttpd/trunk/configure
===================================================================
--- lighttpd/trunk/configure 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/configure 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.67 for lighttpd 1.4.28.
+# Generated by GNU Autoconf 2.68 for lighttpd 1.4.29.
#
# Report bugs to <contact at lighttpd.net>.
#
@@ -91,6 +91,7 @@
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -173,7 +174,15 @@
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
+test \$(( 1 + 1 )) = 2 || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
if (eval "$as_required") 2>/dev/null; then :
as_have_required=yes
else
@@ -216,11 +225,18 @@
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
+ # Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+ esac
+ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
fi
if test x$as_have_required = xno; then :
@@ -528,156 +544,9 @@
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
-case X$lt_ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-ECHO=${lt_ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
- # Yippee, $ECHO works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<_LT_EOF
-$*
-_LT_EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
- if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
- then
- break
- fi
- done
- fi
-
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
- else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$ECHO" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- ECHO='print -r'
- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- ECHO='printf %s\n'
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- ECHO="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- ECHO=echo
- fi
- fi
- fi
- fi
- fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-
test -n "$DJDIR" || exec 7<&0 </dev/null
exec 6>&1
@@ -701,8 +570,8 @@
# Identity of this package.
PACKAGE_NAME='lighttpd'
PACKAGE_TARNAME='lighttpd'
-PACKAGE_VERSION='1.4.28'
-PACKAGE_STRING='lighttpd 1.4.28'
+PACKAGE_VERSION='1.4.29'
+PACKAGE_STRING='lighttpd 1.4.29'
PACKAGE_BUGREPORT='contact at lighttpd.net'
PACKAGE_URL=''
@@ -786,9 +655,11 @@
LIPO
NMEDIT
DSYMUTIL
-lt_ECHO
+MANIFEST_TOOL
RANLIB
+ac_ct_AR
AR
+DLLTOOL
OBJDUMP
NM
ac_ct_DUMPBIN
@@ -906,6 +777,7 @@
enable_shared
with_pic
enable_fast_install
+with_sysroot
enable_libtool_lock
with_libev
with_mysql
@@ -1355,7 +1227,7 @@
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
@@ -1493,7 +1365,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures lighttpd 1.4.28 to adapt to many kinds of systems.
+\`configure' configures lighttpd 1.4.29 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1564,7 +1436,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of lighttpd 1.4.28:";;
+ short | recursive ) echo "Configuration of lighttpd 1.4.29:";;
esac
cat <<\_ACEOF
@@ -1591,6 +1463,8 @@
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
+ --with-sysroot=DIR Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).
--with-libev[=PATH] Include libev support for fdevent handlers in
PATH/include and PATH/lib
--with-mysql[=PATH] Include MySQL support. PATH is the path to
@@ -1706,8 +1580,8 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-lighttpd configure 1.4.28
-generated by GNU Autoconf 2.67
+lighttpd configure 1.4.29
+generated by GNU Autoconf 2.68
Copyright (C) 2010 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
@@ -1753,7 +1627,7 @@
ac_retval=1
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_compile
@@ -1790,7 +1664,7 @@
ac_retval=1
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_cpp
@@ -1803,10 +1677,10 @@
ac_fn_c_check_header_mongrel ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if eval "test \"\${$3+set}\"" = set; then :
+ if eval \${$3+:} false; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
@@ -1873,7 +1747,7 @@
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
eval "$3=\$ac_header_compiler"
@@ -1882,7 +1756,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_mongrel
@@ -1923,7 +1797,7 @@
ac_retval=$ac_status
fi
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_run
@@ -1937,7 +1811,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1955,7 +1829,7 @@
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_compile
@@ -2000,7 +1874,7 @@
# interfere with the next link command; also delete a directory that is
# left behind by Apple's compiler. We do this before executing the actions.
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_link
@@ -2013,7 +1887,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2068,7 +1942,7 @@
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_func
@@ -2081,7 +1955,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
eval "$3=no"
@@ -2122,7 +1996,7 @@
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_type
@@ -2135,7 +2009,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
$as_echo_n "checking for $2.$3... " >&6; }
-if eval "test \"\${$4+set}\"" = set; then :
+if eval \${$4+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2179,7 +2053,7 @@
eval ac_res=\$$4
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_member
@@ -2356,7 +2230,7 @@
rm -f conftest.val
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_compute_int
@@ -2364,8 +2238,8 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by lighttpd $as_me 1.4.28, which was
-generated by GNU Autoconf 2.67. Invocation command line was
+It was created by lighttpd $as_me 1.4.29, which was
+generated by GNU Autoconf 2.68. Invocation command line was
$ $0 $@
@@ -2623,7 +2497,7 @@
|| { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
fi
done
@@ -2752,7 +2626,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then :
+if ${ac_cv_build+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_build_alias=$build_alias
@@ -2768,7 +2642,7 @@
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
@@ -2786,7 +2660,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
$as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then :
+if ${ac_cv_host+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "x$host_alias" = x; then
@@ -2801,7 +2675,7 @@
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
@@ -2819,7 +2693,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
$as_echo_n "checking target system type... " >&6; }
-if test "${ac_cv_target+set}" = set; then :
+if ${ac_cv_target+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "x$target_alias" = x; then
@@ -2834,7 +2708,7 @@
$as_echo "$ac_cv_target" >&6; }
case $ac_cv_target in
*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5 ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
esac
target=$ac_cv_target
ac_save_IFS=$IFS; IFS='-'
@@ -2876,7 +2750,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then :
+if ${ac_cv_path_install+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2963,11 +2837,11 @@
'
case `pwd` in
*[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
+ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
esac
# Do `set' in a subshell so we don't clobber the current shell's
@@ -3053,7 +2927,7 @@
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
@@ -3093,7 +2967,7 @@
set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
@@ -3146,7 +3020,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
- if test "${ac_cv_path_mkdir+set}" = set; then :
+ if ${ac_cv_path_mkdir+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -3197,7 +3071,7 @@
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
+if ${ac_cv_prog_AWK+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
@@ -3237,7 +3111,7 @@
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -3295,7 +3169,7 @@
# Define the identity of the package.
PACKAGE='lighttpd'
- VERSION='1.4.28'
+ VERSION='1.4.29'
cat >>confdefs.h <<_ACEOF
@@ -3403,7 +3277,7 @@
done
rm -rf conftest.dir
-if test "${am_cv_prog_tar_ustar+set}" = set; then :
+if ${am_cv_prog_tar_ustar+:} false; then :
$as_echo_n "(cached) " >&6
else
am_cv_prog_tar_ustar=$_am_tool
@@ -3440,7 +3314,7 @@
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -3480,7 +3354,7 @@
set dummy gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
@@ -3533,7 +3407,7 @@
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -3573,7 +3447,7 @@
set dummy cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -3632,7 +3506,7 @@
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -3676,7 +3550,7 @@
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
@@ -3731,7 +3605,7 @@
test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3846,7 +3720,7 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
@@ -3889,7 +3763,7 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3948,7 +3822,7 @@
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
fi
fi
fi
@@ -3959,7 +3833,7 @@
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
+if ${ac_cv_objext+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -4000,7 +3874,7 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
@@ -4010,7 +3884,7 @@
ac_objext=$OBJEXT
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+if ${ac_cv_c_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -4047,7 +3921,7 @@
ac_save_CFLAGS=$CFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
+if ${ac_cv_prog_cc_g+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
@@ -4125,7 +3999,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
+if ${ac_cv_prog_cc_c89+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c89=no
@@ -4286,7 +4160,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4418,7 +4292,7 @@
fi
set dummy $CC; ac_cc=`$as_echo "$2" |
sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\"" = set; then :
+if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -4537,7 +4411,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then :
+if ${ac_cv_path_SED+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
@@ -4619,7 +4493,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
+if ${ac_cv_path_GREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$GREP"; then
@@ -4682,7 +4556,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
+if ${ac_cv_path_EGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -4749,7 +4623,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then :
+if ${ac_cv_path_FGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
@@ -4832,8 +4706,60 @@
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
@@ -4880,7 +4806,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
-if test "${lt_cv_path_LD+set}" = set; then :
+if ${lt_cv_path_LD+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
@@ -4920,7 +4846,7 @@
test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+if ${lt_cv_prog_gnu_ld+:} false; then :
$as_echo_n "(cached) " >&6
else
# I'd rather use --version here, but apparently some GNU lds only accept -v.
@@ -4952,7 +4878,7 @@
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
+if ${ac_cv_prog_AWK+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
@@ -5000,7 +4926,7 @@
CPP=
fi
if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then :
+ if ${ac_cv_prog_CPP+:} false; then :
$as_echo_n "(cached) " >&6
else
# Double quotes because CPP needs to be expanded
@@ -5116,7 +5042,7 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
fi
ac_ext=c
@@ -5140,7 +5066,7 @@
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -5172,7 +5098,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -5301,7 +5227,7 @@
ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
-if test "x$ac_cv_header_minix_config_h" = x""yes; then :
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
MINIX=yes
else
MINIX=
@@ -5323,7 +5249,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
-if test "${ac_cv_safe_to_define___extensions__+set}" = set; then :
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -5363,7 +5289,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
$as_echo_n "checking for library containing strerror... " >&6; }
-if test "${ac_cv_search_strerror+set}" = set; then :
+if ${ac_cv_search_strerror+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
@@ -5397,11 +5323,11 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_strerror+set}" = set; then :
+ if ${ac_cv_search_strerror+:} false; then :
break
fi
done
-if test "${ac_cv_search_strerror+set}" = set; then :
+if ${ac_cv_search_strerror+:} false; then :
else
ac_cv_search_strerror=no
@@ -5461,7 +5387,7 @@
for ac_header in string.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default"
-if test "x$ac_cv_header_string_h" = x""yes; then :
+if test "x$ac_cv_header_string_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_STRING_H 1
_ACEOF
@@ -5547,8 +5473,8 @@
-macro_version='2.2.6b'
-macro_revision='1.3017'
+macro_version='2.4'
+macro_revision='1.3293'
@@ -5564,9 +5490,26 @@
ltmain="$ac_aux_dir/ltmain.sh"
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then :
+if ${lt_cv_path_NM+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$NM"; then
@@ -5619,14 +5562,17 @@
NM="$lt_cv_path_NM"
else
# Didn't find any BSD compatible name lister, look for dumpbin.
- if test -n "$ac_tool_prefix"; then
- for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_DUMPBIN+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DUMPBIN"; then
@@ -5664,13 +5610,13 @@
fi
if test -z "$DUMPBIN"; then
ac_ct_DUMPBIN=$DUMPBIN
- for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_DUMPBIN"; then
@@ -5719,6 +5665,15 @@
fi
fi
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
if test "$DUMPBIN" != ":"; then
NM="$DUMPBIN"
@@ -5733,18 +5688,18 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
$as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then :
+if ${lt_cv_nm_interface+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:5741: $ac_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&5
- (eval echo "\"\$as_me:5744: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&5
- (eval echo "\"\$as_me:5747: output\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
cat conftest.out >&5
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
@@ -5757,7 +5712,7 @@
# find the maximum length of command line arguments
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+if ${lt_cv_sys_max_cmd_len+:} false; then :
$as_echo_n "(cached) " >&6
else
i=0
@@ -5790,6 +5745,11 @@
lt_cv_sys_max_cmd_len=8192;
;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
@@ -5854,8 +5814,8 @@
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
@@ -5897,8 +5857,8 @@
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, \
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
&& eval 'test $(( 1 + 1 )) -eq 2 \
&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
@@ -5947,9 +5907,83 @@
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then :
+if ${lt_cv_ld_reload_flag+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_reload_flag='-r'
@@ -5963,6 +5997,11 @@
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -5985,7 +6024,7 @@
set dummy ${ac_tool_prefix}objdump; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OBJDUMP"; then
@@ -6025,7 +6064,7 @@
set dummy objdump; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OBJDUMP"; then
@@ -6084,7 +6123,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then :
+if ${lt_cv_deplibs_check_method+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_file_magic_cmd='$MAGIC_CMD'
@@ -6126,16 +6165,18 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-cegcc)
+cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -6165,6 +6206,10 @@
lt_cv_deplibs_check_method=pass_all
;;
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
@@ -6173,11 +6218,11 @@
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
@@ -6280,6 +6325,21 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -6295,14 +6355,167 @@
+
+
+
+
+
+
+
+
+
+
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then :
+if ${ac_cv_prog_DLLTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
@@ -6313,7 +6526,7 @@
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6333,14 +6546,18 @@
fi
+ test -n "$AR" && break
+ done
fi
-if test -z "$ac_cv_prog_AR"; then
+if test -z "$AR"; then
ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AR"; then
@@ -6353,7 +6570,7 @@
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
+ ac_cv_prog_ac_ct_AR="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6372,6 +6589,10 @@
$as_echo "no" >&6; }
fi
+
+ test -n "$ac_ct_AR" && break
+done
+
if test "x$ac_ct_AR" = x; then
AR="false"
else
@@ -6383,12 +6604,10 @@
esac
AR=$ac_ct_AR
fi
-else
- AR="$ac_cv_prog_AR"
fi
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
+: ${AR=ar}
+: ${AR_FLAGS=cru}
@@ -6400,12 +6619,70 @@
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
@@ -6445,7 +6722,7 @@
set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
@@ -6504,7 +6781,7 @@
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
+if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
@@ -6544,7 +6821,7 @@
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
@@ -6615,6 +6892,12 @@
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
@@ -6648,6 +6931,12 @@
+
+
+
+
+
+
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
@@ -6661,7 +6950,7 @@
# Check for command to grab the raw symbol name followed by C symbol from nm.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
$as_echo_n "(cached) " >&6
else
@@ -6722,8 +7011,8 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -6759,6 +7048,7 @@
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -6784,8 +7074,8 @@
test $ac_status = 0; }; then
# Now try to grab the symbols.
nlist=conftest.nm
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && test -s "$nlist"; then
@@ -6800,6 +7090,18 @@
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -6811,7 +7113,7 @@
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
-const struct {
+LT_DLSYM_CONST struct {
const char *name;
void *address;
}
@@ -6837,8 +7139,8 @@
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
@@ -6848,8 +7150,8 @@
test $ac_status = 0; } && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&5
fi
@@ -6886,6 +7188,12 @@
$as_echo "ok" >&6; }
fi
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
@@ -6907,6 +7215,49 @@
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
@@ -6938,7 +7289,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 6941 "configure"' > conftest.$ac_ext
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
@@ -7032,7 +7383,7 @@
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then :
+if ${lt_cv_cc_needs_belf+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_ext=c
@@ -7100,7 +7451,124 @@
need_locks="$enable_libtool_lock"
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
+else
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
case $host_os in
rhapsody* | darwin*)
if test -n "$ac_tool_prefix"; then
@@ -7108,7 +7576,7 @@
set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DSYMUTIL"; then
@@ -7148,7 +7616,7 @@
set dummy dsymutil; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_DSYMUTIL"; then
@@ -7200,7 +7668,7 @@
set dummy ${ac_tool_prefix}nmedit; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_NMEDIT+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$NMEDIT"; then
@@ -7240,7 +7708,7 @@
set dummy nmedit; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_NMEDIT"; then
@@ -7292,7 +7760,7 @@
set dummy ${ac_tool_prefix}lipo; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then :
+if ${ac_cv_prog_LIPO+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$LIPO"; then
@@ -7332,7 +7800,7 @@
set dummy lipo; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_LIPO"; then
@@ -7384,7 +7852,7 @@
set dummy ${ac_tool_prefix}otool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then :
+if ${ac_cv_prog_OTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OTOOL"; then
@@ -7424,7 +7892,7 @@
set dummy otool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OTOOL"; then
@@ -7476,7 +7944,7 @@
set dummy ${ac_tool_prefix}otool64; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OTOOL64"; then
@@ -7516,7 +7984,7 @@
set dummy otool64; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OTOOL64"; then
@@ -7591,7 +8059,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
$as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+if ${lt_cv_apple_cc_single_mod+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
@@ -7620,7 +8088,7 @@
$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_exported_symbols_list=no
@@ -7650,6 +8118,38 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
_lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -7677,7 +8177,7 @@
else
_lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
- if test "$DSYMUTIL" != ":"; then
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -7689,7 +8189,7 @@
do :
ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
"
-if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_DLFCN_H 1
_ACEOF
@@ -7700,6 +8200,8 @@
+
+
# Set options
@@ -7790,6 +8292,7 @@
+
test -z "$LN_S" && LN_S="ln -s"
@@ -7811,7 +8314,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then :
+if ${lt_cv_objdir+:} false; then :
$as_echo_n "(cached) " >&6
else
rm -f .libs 2>/dev/null
@@ -7839,19 +8342,6 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
@@ -7864,23 +8354,6 @@
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
# Global variables:
ofile=libtool
can_build_shared=yes
@@ -7909,7 +8382,7 @@
*) break;;
esac
done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
# Only perform the check for file, if the check method requires it
@@ -7919,7 +8392,7 @@
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
@@ -7985,7 +8458,7 @@
if test -n "$ac_tool_prefix"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
$as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
@@ -8118,11 +8591,16 @@
lt_prog_compiler_no_builtin_flag=
if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_rtti_exceptions=no
@@ -8138,15 +8616,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8141: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:8145: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_rtti_exceptions=yes
@@ -8175,8 +8653,6 @@
lt_prog_compiler_pic=
lt_prog_compiler_static=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
if test "$GCC" = yes; then
lt_prog_compiler_wl='-Wl,'
@@ -8224,6 +8700,12 @@
lt_prog_compiler_pic='-fno-common'
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
@@ -8266,6 +8748,13 @@
lt_prog_compiler_pic='-fPIC'
;;
esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ lt_prog_compiler_pic='-Xcompiler -fPIC'
+ ;;
+ esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
@@ -8328,7 +8817,13 @@
lt_prog_compiler_pic='--shared'
lt_prog_compiler_static='--static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
lt_prog_compiler_wl='-Wl,'
@@ -8340,26 +8835,26 @@
# All Alpha code is PIC.
lt_prog_compiler_static='-non_shared'
;;
- xl*)
- # IBM XL C 8.0/Fortran 10.1 on PPC
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-qpic'
lt_prog_compiler_static='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
*Sun\ C*)
# Sun C 5.9
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
lt_prog_compiler_wl='-Wl,'
;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
- ;;
esac
;;
esac
@@ -8390,7 +8885,7 @@
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
case $cc_basename in
- f77* | f90* | f95*)
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
lt_prog_compiler_wl='-Qoption ld ';;
*)
lt_prog_compiler_wl='-Wl,';;
@@ -8447,21 +8942,25 @@
lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
;;
esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
-
-
-
-
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_pic_works=no
@@ -8477,15 +8976,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8480: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:8484: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_pic_works=yes
@@ -8514,13 +9013,18 @@
+
+
+
+
+
#
# Check to make sure the static flag actually works.
#
wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+if ${lt_cv_prog_compiler_static_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
@@ -8533,7 +9037,7 @@
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_static_works=yes
@@ -8563,7 +9067,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o=no
@@ -8582,16 +9086,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8585: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:8589: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
@@ -8618,7 +9122,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o=no
@@ -8637,16 +9141,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8640: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:8644: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
@@ -8756,13 +9260,39 @@
openbsd*)
with_gnu_ld=no
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | gnu*)
link_all_deplibs=no
;;
esac
ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -8796,11 +9326,12 @@
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
_LT_EOF
fi
@@ -8836,10 +9367,12 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -8857,6 +9390,11 @@
fi
;;
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
@@ -8882,15 +9420,16 @@
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -8901,13 +9440,17 @@
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
- xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
@@ -8923,17 +9466,17 @@
fi
case $cc_basename in
- xlf*)
+ xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
hardcode_libdir_flag_spec=
hardcode_libdir_flag_spec_ld='-rpath $libdir'
- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test "x$supports_anon_versioning" = xyes; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -8947,8 +9490,8 @@
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -8966,8 +9509,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9013,8 +9556,8 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9054,8 +9597,10 @@
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
@@ -9143,7 +9688,13 @@
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -9156,25 +9707,32 @@
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
-fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
@@ -9183,7 +9741,13 @@
else
# Determine the default libpath from the value encoded in an
# empty executable.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -9196,30 +9760,42 @@
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
-fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
no_undefined_flag=' ${wl}-bernotok'
allow_undefined_flag=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
archive_cmds_need_lc=yes
# This is similar to how AIX traditionally builds its shared libraries.
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -9251,20 +9827,63 @@
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes=yes
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -9274,7 +9893,11 @@
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec=''
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec=''
+ fi
link_all_deplibs=yes
allow_undefined_flag="$_lt_dar_allow_undefined"
case $cc_basename in
@@ -9282,7 +9905,7 @@
*) _lt_dar_can_shared=$GCC ;;
esac
if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -9325,7 +9948,7 @@
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
@@ -9333,7 +9956,7 @@
hpux9*)
if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
@@ -9348,8 +9971,8 @@
;;
hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -9367,16 +9990,16 @@
;;
hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
case $host_cpu in
hppa*64*)
archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
@@ -9388,7 +10011,46 @@
archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
;;
esac
fi
@@ -9416,26 +10078,39 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-int foo(void) {}
+int foo (void) { return 0; }
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
+ lt_cv_irix_exported_symbol=yes
+else
+ lt_cv_irix_exported_symbol=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -9497,17 +10172,17 @@
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -9517,13 +10192,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
@@ -9536,9 +10211,9 @@
no_undefined_flag=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
@@ -9726,44 +10401,50 @@
# to ld, don't add -lc before -lgcc.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl
- pic_flag=$lt_prog_compiler_pic
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
(eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- then
- archive_cmds_need_lc=no
- else
- archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
;;
esac
fi
@@ -9934,16 +10615,23 @@
darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
*) lt_awk_arg="/^libraries:/" ;;
esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary.
lt_tmp_lt_search_path_spec=
@@ -9956,7 +10644,7 @@
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS=" "; FS="/|\n";} {
lt_foo="";
lt_count=0;
@@ -9976,7 +10664,13 @@
if (lt_foo != "") { lt_freq[lt_foo]++; }
if (lt_freq[lt_foo] == 1) { print lt_foo; }
}'`
- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
@@ -10064,7 +10758,7 @@
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
@@ -10095,8 +10789,9 @@
need_version=no
need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
@@ -10117,36 +10812,83 @@
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
+ dynamic_linker='Win32 ld.exe'
;;
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
*)
+ # Assume MSVC wrapper
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
;;
esac
- dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
@@ -10230,9 +10972,23 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
@@ -10275,8 +11031,10 @@
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[3-9]*)
@@ -10343,12 +11101,17 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+
# Some binutils ld are patched to set DT_RUNPATH
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -10361,14 +11124,18 @@
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
- shlibpath_overrides_runpath=yes
+ lt_cv_shlibpath_overrides_runpath=yes
fi
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
@@ -10376,7 +11143,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -10691,6 +11458,11 @@
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action=
@@ -10763,7 +11535,7 @@
# if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -10797,7 +11569,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
@@ -10811,12 +11583,12 @@
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = x""yes; then :
+if test "x$ac_cv_func_shl_load" = xyes; then :
lt_cv_dlopen="shl_load"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+if ${ac_cv_lib_dld_shl_load+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -10850,16 +11622,16 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = x""yes; then :
+if test "x$ac_cv_func_dlopen" = xyes; then :
lt_cv_dlopen="dlopen"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -10893,12 +11665,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+if ${ac_cv_lib_svld_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -10932,12 +11704,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+if ${ac_cv_lib_dld_dld_link+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -10971,7 +11743,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
fi
@@ -11012,7 +11784,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then :
+if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
@@ -11021,7 +11793,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11024 "configure"
+#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11062,7 +11834,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11071,7 +11849,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -11108,7 +11890,7 @@
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then :
+if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
@@ -11117,7 +11899,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11120 "configure"
+#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11158,7 +11940,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11167,7 +11955,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -11349,7 +12141,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11461,7 +12253,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5
$as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; }
-if test "${ac_cv_header_sys_wait_h+set}" = set; then :
+if ${ac_cv_header_sys_wait_h+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11503,7 +12295,7 @@
for ac_header in arpa/inet.h fcntl.h netinet/in.h stdlib.h string.h \
sys/socket.h sys/time.h unistd.h sys/sendfile.h sys/uio.h \
getopt.h sys/epoll.h sys/select.h poll.h sys/poll.h sys/devpoll.h sys/filio.h \
-sys/mman.h sys/event.h sys/port.h pwd.h sys/syslimits.h \
+sys/mman.h sys/event.h port.h pwd.h sys/syslimits.h \
sys/resource.h sys/un.h syslog.h sys/prctl.h uuid/uuid.h
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
@@ -11520,7 +12312,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
-if test "${ac_cv_c_const+set}" = set; then :
+if ${ac_cv_c_const+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11600,7 +12392,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
$as_echo_n "checking for inline... " >&6; }
-if test "${ac_cv_c_inline+set}" = set; then :
+if ${ac_cv_c_inline+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_c_inline=no
@@ -11642,7 +12434,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether char is unsigned" >&5
$as_echo_n "checking whether char is unsigned... " >&6; }
-if test "${ac_cv_c_char_unsigned+set}" = set; then :
+if ${ac_cv_c_char_unsigned+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11673,7 +12465,7 @@
fi
ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default"
-if test "x$ac_cv_type_off_t" = x""yes; then :
+if test "x$ac_cv_type_off_t" = xyes; then :
else
@@ -11684,7 +12476,7 @@
fi
ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
-if test "x$ac_cv_type_pid_t" = x""yes; then :
+if test "x$ac_cv_type_pid_t" = xyes; then :
else
@@ -11695,7 +12487,7 @@
fi
ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
-if test "x$ac_cv_type_size_t" = x""yes; then :
+if test "x$ac_cv_type_size_t" = xyes; then :
else
@@ -11708,7 +12500,7 @@
ac_fn_c_check_member "$LINENO" "struct tm" "tm_gmtoff" "ac_cv_member_struct_tm_tm_gmtoff" "#include <time.h>
"
-if test "x$ac_cv_member_struct_tm_tm_gmtoff" = x""yes; then :
+if test "x$ac_cv_member_struct_tm_tm_gmtoff" = xyes; then :
$as_echo "#define HAVE_STRUCT_TM_GMTOFF 1" >>confdefs.h
@@ -11716,7 +12508,7 @@
ac_fn_c_check_type "$LINENO" "struct sockaddr_storage" "ac_cv_type_struct_sockaddr_storage" "#include <sys/socket.h>
"
-if test "x$ac_cv_type_struct_sockaddr_storage" = x""yes; then :
+if test "x$ac_cv_type_struct_sockaddr_storage" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_STRUCT_SOCKADDR_STORAGE 1
@@ -11728,7 +12520,7 @@
ac_fn_c_check_type "$LINENO" "socklen_t" "ac_cv_type_socklen_t" "#include <sys/types.h>
#include <sys/socket.h>
"
-if test "x$ac_cv_type_socklen_t" = x""yes; then :
+if test "x$ac_cv_type_socklen_t" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_SOCKLEN_T 1
@@ -11741,7 +12533,7 @@
for ac_header in vfork.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default"
-if test "x$ac_cv_header_vfork_h" = x""yes; then :
+if test "x$ac_cv_header_vfork_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_VFORK_H 1
_ACEOF
@@ -11765,7 +12557,7 @@
if test "x$ac_cv_func_fork" = xyes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5
$as_echo_n "checking for working fork... " >&6; }
-if test "${ac_cv_func_fork_works+set}" = set; then :
+if ${ac_cv_func_fork_works+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
@@ -11818,7 +12610,7 @@
if test "x$ac_cv_func_vfork" = xyes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5
$as_echo_n "checking for working vfork... " >&6; }
-if test "${ac_cv_func_vfork_works+set}" = set; then :
+if ${ac_cv_func_vfork_works+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
@@ -11953,7 +12745,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
$as_echo_n "checking return type of signal handlers... " >&6; }
-if test "${ac_cv_type_signal+set}" = set; then :
+if ${ac_cv_type_signal+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11986,7 +12778,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether lstat correctly handles trailing slash" >&5
$as_echo_n "checking whether lstat correctly handles trailing slash... " >&6; }
-if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then :
+if ${ac_cv_func_lstat_dereferences_slashed_symlink+:} false; then :
$as_echo_n "(cached) " >&6
else
rm -f conftest.sym conftest.file
@@ -12048,7 +12840,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat accepts an empty string" >&5
$as_echo_n "checking whether stat accepts an empty string... " >&6; }
-if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then :
+if ${ac_cv_func_stat_empty_string_bug+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
@@ -12095,7 +12887,7 @@
for ac_func in strftime
do :
ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime"
-if test "x$ac_cv_func_strftime" = x""yes; then :
+if test "x$ac_cv_func_strftime" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_STRFTIME 1
_ACEOF
@@ -12104,7 +12896,7 @@
# strftime is in -lintl on SCO UNIX.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for strftime in -lintl" >&5
$as_echo_n "checking for strftime in -lintl... " >&6; }
-if test "${ac_cv_lib_intl_strftime+set}" = set; then :
+if ${ac_cv_lib_intl_strftime+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -12138,7 +12930,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_strftime" >&5
$as_echo "$ac_cv_lib_intl_strftime" >&6; }
-if test "x$ac_cv_lib_intl_strftime" = x""yes; then :
+if test "x$ac_cv_lib_intl_strftime" = xyes; then :
$as_echo "#define HAVE_STRFTIME 1" >>confdefs.h
LIBS="-lintl $LIBS"
@@ -12165,7 +12957,7 @@
set dummy pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then :
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $PKG_CONFIG in
@@ -12225,13 +13017,14 @@
+
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then :
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $PKG_CONFIG in
@@ -12274,7 +13067,7 @@
set dummy pkg-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then :
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $ac_pt_PKG_CONFIG in
@@ -12353,6 +13146,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LIBEV_CFLAGS=`$PKG_CONFIG --cflags "libev" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -12369,6 +13163,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LIBEV_LIBS=`$PKG_CONFIG --libs "libev" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -12388,9 +13183,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LIBEV_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libev" 2>&1`
+ LIBEV_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libev" 2>&1`
else
- LIBEV_PKG_ERRORS=`$PKG_CONFIG --print-errors "libev" 2>&1`
+ LIBEV_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libev" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LIBEV_PKG_ERRORS" >&5
@@ -12404,14 +13199,14 @@
for ac_header in ev.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "ev.h" "ac_cv_header_ev_h" "$ac_includes_default"
-if test "x$ac_cv_header_ev_h" = x""yes; then :
+if test "x$ac_cv_header_ev_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_EV_H 1
_ACEOF
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ev_loop in -lev" >&5
-$as_echo_n "checking for ev_loop in -lev... " >&6; }
-if test "${ac_cv_lib_ev_ev_loop+set}" = set; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ev_time in -lev" >&5
+$as_echo_n "checking for ev_time in -lev... " >&6; }
+if ${ac_cv_lib_ev_ev_time+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -12425,27 +13220,27 @@
#ifdef __cplusplus
extern "C"
#endif
-char ev_loop ();
+char ev_time ();
int
main ()
{
-return ev_loop ();
+return ev_time ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ev_ev_loop=yes
+ ac_cv_lib_ev_ev_time=yes
else
- ac_cv_lib_ev_ev_loop=no
+ ac_cv_lib_ev_ev_time=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ev_ev_loop" >&5
-$as_echo "$ac_cv_lib_ev_ev_loop" >&6; }
-if test "x$ac_cv_lib_ev_ev_loop" = x""yes; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ev_ev_time" >&5
+$as_echo "$ac_cv_lib_ev_ev_time" >&6; }
+if test "x$ac_cv_lib_ev_ev_time" = xyes; then :
LIBEV_CFLAGS=""
LIBEV_LIBS="-lev"
@@ -12480,14 +13275,14 @@
for ac_header in ev.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "ev.h" "ac_cv_header_ev_h" "$ac_includes_default"
-if test "x$ac_cv_header_ev_h" = x""yes; then :
+if test "x$ac_cv_header_ev_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_EV_H 1
_ACEOF
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ev_loop in -lev" >&5
-$as_echo_n "checking for ev_loop in -lev... " >&6; }
-if test "${ac_cv_lib_ev_ev_loop+set}" = set; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ev_time in -lev" >&5
+$as_echo_n "checking for ev_time in -lev... " >&6; }
+if ${ac_cv_lib_ev_ev_time+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -12501,27 +13296,27 @@
#ifdef __cplusplus
extern "C"
#endif
-char ev_loop ();
+char ev_time ();
int
main ()
{
-return ev_loop ();
+return ev_time ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ev_ev_loop=yes
+ ac_cv_lib_ev_ev_time=yes
else
- ac_cv_lib_ev_ev_loop=no
+ ac_cv_lib_ev_ev_time=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ev_ev_loop" >&5
-$as_echo "$ac_cv_lib_ev_ev_loop" >&6; }
-if test "x$ac_cv_lib_ev_ev_loop" = x""yes; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ev_ev_time" >&5
+$as_echo "$ac_cv_lib_ev_ev_time" >&6; }
+if test "x$ac_cv_lib_ev_ev_time" = xyes; then :
LIBEV_CFLAGS=""
LIBEV_LIBS="-lev"
@@ -12582,7 +13377,7 @@
set dummy mysql_config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_MYSQL_CONFIG+set}" = set; then :
+if ${ac_cv_path_MYSQL_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MYSQL_CONFIG in
@@ -12688,7 +13483,7 @@
if test "$WITH_LDAP" != "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ldap_bind in -lldap" >&5
$as_echo_n "checking for ldap_bind in -lldap... " >&6; }
-if test "${ac_cv_lib_ldap_ldap_bind+set}" = set; then :
+if ${ac_cv_lib_ldap_ldap_bind+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -12722,12 +13517,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ldap_ldap_bind" >&5
$as_echo "$ac_cv_lib_ldap_ldap_bind" >&6; }
-if test "x$ac_cv_lib_ldap_ldap_bind" = x""yes; then :
+if test "x$ac_cv_lib_ldap_ldap_bind" = xyes; then :
for ac_header in ldap.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "ldap.h" "ac_cv_header_ldap_h" "$ac_includes_default"
-if test "x$ac_cv_header_ldap_h" = x""yes; then :
+if test "x$ac_cv_header_ldap_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_LDAP_H 1
_ACEOF
@@ -12752,7 +13547,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ber_printf in -llber" >&5
$as_echo_n "checking for ber_printf in -llber... " >&6; }
-if test "${ac_cv_lib_lber_ber_printf+set}" = set; then :
+if ${ac_cv_lib_lber_ber_printf+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -12786,12 +13581,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lber_ber_printf" >&5
$as_echo "$ac_cv_lib_lber_ber_printf" >&6; }
-if test "x$ac_cv_lib_lber_ber_printf" = x""yes; then :
+if test "x$ac_cv_lib_lber_ber_printf" = xyes; then :
for ac_header in lber.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "lber.h" "ac_cv_header_lber_h" "$ac_includes_default"
-if test "x$ac_cv_header_lber_h" = x""yes; then :
+if test "x$ac_cv_header_lber_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_LBER_H 1
_ACEOF
@@ -12828,7 +13623,7 @@
if test "$WITH_ATTR" != "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for attr_get in -lattr" >&5
$as_echo_n "checking for attr_get in -lattr... " >&6; }
-if test "${ac_cv_lib_attr_attr_get+set}" = set; then :
+if ${ac_cv_lib_attr_attr_get+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -12862,12 +13657,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_attr_attr_get" >&5
$as_echo "$ac_cv_lib_attr_attr_get" >&6; }
-if test "x$ac_cv_lib_attr_attr_get" = x""yes; then :
+if test "x$ac_cv_lib_attr_attr_get" = xyes; then :
for ac_header in attr/attributes.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "attr/attributes.h" "ac_cv_header_attr_attributes_h" "$ac_includes_default"
-if test "x$ac_cv_header_attr_attributes_h" = x""yes; then :
+if test "x$ac_cv_header_attr_attributes_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_ATTR_ATTRIBUTES_H 1
_ACEOF
@@ -12891,7 +13686,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing socket" >&5
$as_echo_n "checking for library containing socket... " >&6; }
-if test "${ac_cv_search_socket+set}" = set; then :
+if ${ac_cv_search_socket+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
@@ -12925,11 +13720,11 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_socket+set}" = set; then :
+ if ${ac_cv_search_socket+:} false; then :
break
fi
done
-if test "${ac_cv_search_socket+set}" = set; then :
+if ${ac_cv_search_socket+:} false; then :
else
ac_cv_search_socket=no
@@ -12947,7 +13742,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing gethostbyname" >&5
$as_echo_n "checking for library containing gethostbyname... " >&6; }
-if test "${ac_cv_search_gethostbyname+set}" = set; then :
+if ${ac_cv_search_gethostbyname+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
@@ -12981,11 +13776,11 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_gethostbyname+set}" = set; then :
+ if ${ac_cv_search_gethostbyname+:} false; then :
break
fi
done
-if test "${ac_cv_search_gethostbyname+set}" = set; then :
+if ${ac_cv_search_gethostbyname+:} false; then :
else
ac_cv_search_gethostbyname=no
@@ -13003,7 +13798,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing hstrerror" >&5
$as_echo_n "checking for library containing hstrerror... " >&6; }
-if test "${ac_cv_search_hstrerror+set}" = set; then :
+if ${ac_cv_search_hstrerror+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
@@ -13037,11 +13832,11 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_hstrerror+set}" = set; then :
+ if ${ac_cv_search_hstrerror+:} false; then :
break
fi
done
-if test "${ac_cv_search_hstrerror+set}" = set; then :
+if ${ac_cv_search_hstrerror+:} false; then :
else
ac_cv_search_hstrerror=no
@@ -13061,7 +13856,7 @@
save_LIBS=$LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
$as_echo_n "checking for library containing dlopen... " >&6; }
-if test "${ac_cv_search_dlopen+set}" = set; then :
+if ${ac_cv_search_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
@@ -13095,11 +13890,11 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_dlopen+set}" = set; then :
+ if ${ac_cv_search_dlopen+:} false; then :
break
fi
done
-if test "${ac_cv_search_dlopen+set}" = set; then :
+if ${ac_cv_search_dlopen+:} false; then :
else
ac_cv_search_dlopen=no
@@ -13116,7 +13911,7 @@
for ac_header in dlfcn.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default"
-if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_DLFCN_H 1
_ACEOF
@@ -13157,7 +13952,7 @@
for ac_header in valgrind/valgrind.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "valgrind/valgrind.h" "ac_cv_header_valgrind_valgrind_h" "$ac_includes_default"
-if test "x$ac_cv_header_valgrind_valgrind_h" = x""yes; then :
+if test "x$ac_cv_header_valgrind_valgrind_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_VALGRIND_VALGRIND_H 1
_ACEOF
@@ -13225,7 +14020,7 @@
for ac_header in openssl/ssl.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "openssl/ssl.h" "ac_cv_header_openssl_ssl_h" "$ac_includes_default"
-if test "x$ac_cv_header_openssl_ssl_h" = x""yes; then :
+if test "x$ac_cv_header_openssl_ssl_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_OPENSSL_SSL_H 1
_ACEOF
@@ -13237,7 +14032,7 @@
OLDLIBS="$LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BIO_f_base64 in -lcrypto" >&5
$as_echo_n "checking for BIO_f_base64 in -lcrypto... " >&6; }
-if test "${ac_cv_lib_crypto_BIO_f_base64+set}" = set; then :
+if ${ac_cv_lib_crypto_BIO_f_base64+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -13271,11 +14066,11 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypto_BIO_f_base64" >&5
$as_echo "$ac_cv_lib_crypto_BIO_f_base64" >&6; }
-if test "x$ac_cv_lib_crypto_BIO_f_base64" = x""yes; then :
+if test "x$ac_cv_lib_crypto_BIO_f_base64" = xyes; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SSL_new in -lssl" >&5
$as_echo_n "checking for SSL_new in -lssl... " >&6; }
-if test "${ac_cv_lib_ssl_SSL_new+set}" = set; then :
+if ${ac_cv_lib_ssl_SSL_new+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -13309,7 +14104,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_SSL_new" >&5
$as_echo "$ac_cv_lib_ssl_SSL_new" >&6; }
-if test "x$ac_cv_lib_ssl_SSL_new" = x""yes; then :
+if test "x$ac_cv_lib_ssl_SSL_new" = xyes; then :
SSL_LIB="-lssl -lcrypto"
$as_echo "#define HAVE_LIBSSL /**/" >>confdefs.h
@@ -13341,7 +14136,7 @@
set dummy pcre-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PCRECONFIG+set}" = set; then :
+if ${ac_cv_path_PCRECONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $PCRECONFIG in
@@ -13410,7 +14205,7 @@
if test "$WITH_ZLIB" != "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for deflate in -lz" >&5
$as_echo_n "checking for deflate in -lz... " >&6; }
-if test "${ac_cv_lib_z_deflate+set}" = set; then :
+if ${ac_cv_lib_z_deflate+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -13444,12 +14239,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_deflate" >&5
$as_echo "$ac_cv_lib_z_deflate" >&6; }
-if test "x$ac_cv_lib_z_deflate" = x""yes; then :
+if test "x$ac_cv_lib_z_deflate" = xyes; then :
for ac_header in zlib.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_zlib_h" = x""yes; then :
+if test "x$ac_cv_header_zlib_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_ZLIB_H 1
_ACEOF
@@ -13490,7 +14285,7 @@
if test "$WITH_BZIP2" != "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BZ2_bzCompress in -lbz2" >&5
$as_echo_n "checking for BZ2_bzCompress in -lbz2... " >&6; }
-if test "${ac_cv_lib_bz2_BZ2_bzCompress+set}" = set; then :
+if ${ac_cv_lib_bz2_BZ2_bzCompress+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -13524,12 +14319,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bz2_BZ2_bzCompress" >&5
$as_echo "$ac_cv_lib_bz2_BZ2_bzCompress" >&6; }
-if test "x$ac_cv_lib_bz2_BZ2_bzCompress" = x""yes; then :
+if test "x$ac_cv_lib_bz2_BZ2_bzCompress" = xyes; then :
for ac_header in bzlib.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "bzlib.h" "ac_cv_header_bzlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_bzlib_h" = x""yes; then :
+if test "x$ac_cv_header_bzlib_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_BZLIB_H 1
_ACEOF
@@ -13570,7 +14365,7 @@
if test "$WITH_FAM" != "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FAMOpen2 in -lfam" >&5
$as_echo_n "checking for FAMOpen2 in -lfam... " >&6; }
-if test "${ac_cv_lib_fam_FAMOpen2+set}" = set; then :
+if ${ac_cv_lib_fam_FAMOpen2+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -13604,12 +14399,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_fam_FAMOpen2" >&5
$as_echo "$ac_cv_lib_fam_FAMOpen2" >&6; }
-if test "x$ac_cv_lib_fam_FAMOpen2" = x""yes; then :
+if test "x$ac_cv_lib_fam_FAMOpen2" = xyes; then :
for ac_header in fam.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "fam.h" "ac_cv_header_fam_h" "$ac_includes_default"
-if test "x$ac_cv_header_fam_h" = x""yes; then :
+if test "x$ac_cv_header_fam_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_FAM_H 1
_ACEOF
@@ -13645,6 +14440,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_FAM_CFLAGS=`$PKG_CONFIG --cflags "gamin >= 0.1.0" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -13661,6 +14457,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_FAM_LIBS=`$PKG_CONFIG --libs "gamin >= 0.1.0" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -13680,9 +14477,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- FAM_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gamin >= 0.1.0" 2>&1`
+ FAM_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gamin >= 0.1.0" 2>&1`
else
- FAM_PKG_ERRORS=`$PKG_CONFIG --print-errors "gamin >= 0.1.0" 2>&1`
+ FAM_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gamin >= 0.1.0" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$FAM_PKG_ERRORS" >&5
@@ -13711,7 +14508,7 @@
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
FAM_CFLAGS=$pkg_cv_FAM_CFLAGS
FAM_LIBS=$pkg_cv_FAM_LIBS
@@ -13732,7 +14529,7 @@
for ac_func in FAMNoExists
do :
ac_fn_c_check_func "$LINENO" "FAMNoExists" "ac_cv_func_FAMNoExists"
-if test "x$ac_cv_func_FAMNoExists" = x""yes; then :
+if test "x$ac_cv_func_FAMNoExists" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_FAMNOEXISTS 1
_ACEOF
@@ -13776,6 +14573,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_XML_CFLAGS=`$PKG_CONFIG --cflags "libxml-2.0" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -13792,6 +14590,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_XML_LIBS=`$PKG_CONFIG --libs "libxml-2.0" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -13811,9 +14610,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- XML_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libxml-2.0" 2>&1`
+ XML_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libxml-2.0" 2>&1`
else
- XML_PKG_ERRORS=`$PKG_CONFIG --print-errors "libxml-2.0" 2>&1`
+ XML_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libxml-2.0" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$XML_PKG_ERRORS" >&5
@@ -13842,7 +14641,7 @@
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
XML_CFLAGS=$pkg_cv_XML_CFLAGS
XML_LIBS=$pkg_cv_XML_LIBS
@@ -13872,6 +14671,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_SQLITE_CFLAGS=`$PKG_CONFIG --cflags "sqlite3" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -13888,6 +14688,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_SQLITE_LIBS=`$PKG_CONFIG --libs "sqlite3" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -13907,9 +14708,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- SQLITE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "sqlite3" 2>&1`
+ SQLITE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "sqlite3" 2>&1`
else
- SQLITE_PKG_ERRORS=`$PKG_CONFIG --print-errors "sqlite3" 2>&1`
+ SQLITE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "sqlite3" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$SQLITE_PKG_ERRORS" >&5
@@ -13938,7 +14739,7 @@
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
SQLITE_CFLAGS=$pkg_cv_SQLITE_CFLAGS
SQLITE_LIBS=$pkg_cv_SQLITE_LIBS
@@ -13970,7 +14771,7 @@
if test "$WITH_WEBDAV_LOCKS" != "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uuid_unparse in -luuid" >&5
$as_echo_n "checking for uuid_unparse in -luuid... " >&6; }
-if test "${ac_cv_lib_uuid_uuid_unparse+set}" = set; then :
+if ${ac_cv_lib_uuid_uuid_unparse+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -14004,12 +14805,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_uuid_uuid_unparse" >&5
$as_echo "$ac_cv_lib_uuid_uuid_unparse" >&6; }
-if test "x$ac_cv_lib_uuid_uuid_unparse" = x""yes; then :
+if test "x$ac_cv_lib_uuid_uuid_unparse" = xyes; then :
for ac_header in uuid/uuid.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "uuid/uuid.h" "ac_cv_header_uuid_uuid_h" "$ac_includes_default"
-if test "x$ac_cv_header_uuid_uuid_h" = x""yes; then :
+if test "x$ac_cv_header_uuid_uuid_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_UUID_UUID_H 1
_ACEOF
@@ -14050,7 +14851,7 @@
if test "$WITH_GDBM" != "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gdbm_open in -lgdbm" >&5
$as_echo_n "checking for gdbm_open in -lgdbm... " >&6; }
-if test "${ac_cv_lib_gdbm_gdbm_open+set}" = set; then :
+if ${ac_cv_lib_gdbm_gdbm_open+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -14084,12 +14885,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gdbm_gdbm_open" >&5
$as_echo "$ac_cv_lib_gdbm_gdbm_open" >&6; }
-if test "x$ac_cv_lib_gdbm_gdbm_open" = x""yes; then :
+if test "x$ac_cv_lib_gdbm_gdbm_open" = xyes; then :
for ac_header in gdbm.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "gdbm.h" "ac_cv_header_gdbm_h" "$ac_includes_default"
-if test "x$ac_cv_header_gdbm_h" = x""yes; then :
+if test "x$ac_cv_header_gdbm_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_GDBM_H 1
_ACEOF
@@ -14126,7 +14927,7 @@
if test "$WITH_MEMCACHE" != "no"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for mc_new in -lmemcache" >&5
$as_echo_n "checking for mc_new in -lmemcache... " >&6; }
-if test "${ac_cv_lib_memcache_mc_new+set}" = set; then :
+if ${ac_cv_lib_memcache_mc_new+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -14160,12 +14961,12 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_memcache_mc_new" >&5
$as_echo "$ac_cv_lib_memcache_mc_new" >&6; }
-if test "x$ac_cv_lib_memcache_mc_new" = x""yes; then :
+if test "x$ac_cv_lib_memcache_mc_new" = xyes; then :
for ac_header in memcache.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "memcache.h" "ac_cv_header_memcache_h" "$ac_includes_default"
-if test "x$ac_cv_header_memcache_h" = x""yes; then :
+if test "x$ac_cv_header_memcache_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_MEMCACHE_H 1
_ACEOF
@@ -14220,6 +15021,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_CFLAGS=`$PKG_CONFIG --cflags "$WITH_LUA >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14236,6 +15038,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_LIBS=`$PKG_CONFIG --libs "$WITH_LUA >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14255,9 +15058,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$WITH_LUA >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$WITH_LUA >= 5.1" 2>&1`
else
- LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors "$WITH_LUA >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$WITH_LUA >= 5.1" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LUA_PKG_ERRORS" >&5
@@ -14278,6 +15081,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_CFLAGS=`$PKG_CONFIG --cflags "lua5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14294,6 +15098,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_LIBS=`$PKG_CONFIG --libs "lua5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14313,9 +15118,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "lua5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "lua5.1 >= 5.1" 2>&1`
else
- LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors "lua5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "lua5.1 >= 5.1" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LUA_PKG_ERRORS" >&5
@@ -14336,6 +15141,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_CFLAGS=`$PKG_CONFIG --cflags "lua-5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14352,6 +15158,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_LIBS=`$PKG_CONFIG --libs "lua-5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14371,9 +15178,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "lua-5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "lua-5.1 >= 5.1" 2>&1`
else
- LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors "lua-5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "lua-5.1 >= 5.1" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LUA_PKG_ERRORS" >&5
@@ -14402,7 +15209,7 @@
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
LUA_CFLAGS=$pkg_cv_LUA_CFLAGS
LUA_LIBS=$pkg_cv_LUA_LIBS
@@ -14437,6 +15244,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_CFLAGS=`$PKG_CONFIG --cflags "lua-5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14453,6 +15261,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_LIBS=`$PKG_CONFIG --libs "lua-5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14472,9 +15281,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "lua-5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "lua-5.1 >= 5.1" 2>&1`
else
- LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors "lua-5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "lua-5.1 >= 5.1" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LUA_PKG_ERRORS" >&5
@@ -14503,7 +15312,7 @@
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
LUA_CFLAGS=$pkg_cv_LUA_CFLAGS
LUA_LIBS=$pkg_cv_LUA_LIBS
@@ -14553,6 +15362,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_CFLAGS=`$PKG_CONFIG --cflags "lua5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14569,6 +15379,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_LIBS=`$PKG_CONFIG --libs "lua5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14588,9 +15399,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "lua5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "lua5.1 >= 5.1" 2>&1`
else
- LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors "lua5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "lua5.1 >= 5.1" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LUA_PKG_ERRORS" >&5
@@ -14611,6 +15422,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_CFLAGS=`$PKG_CONFIG --cflags "lua-5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14627,6 +15439,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_LIBS=`$PKG_CONFIG --libs "lua-5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14646,9 +15459,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "lua-5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "lua-5.1 >= 5.1" 2>&1`
else
- LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors "lua-5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "lua-5.1 >= 5.1" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LUA_PKG_ERRORS" >&5
@@ -14677,7 +15490,7 @@
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
LUA_CFLAGS=$pkg_cv_LUA_CFLAGS
LUA_LIBS=$pkg_cv_LUA_LIBS
@@ -14712,6 +15525,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_CFLAGS=`$PKG_CONFIG --cflags "lua-5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14728,6 +15542,7 @@
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LUA_LIBS=`$PKG_CONFIG --libs "lua-5.1 >= 5.1" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
@@ -14747,9 +15562,9 @@
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "lua-5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "lua-5.1 >= 5.1" 2>&1`
else
- LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors "lua-5.1 >= 5.1" 2>&1`
+ LUA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "lua-5.1 >= 5.1" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LUA_PKG_ERRORS" >&5
@@ -14778,7 +15593,7 @@
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
LUA_CFLAGS=$pkg_cv_LUA_CFLAGS
LUA_LIBS=$pkg_cv_LUA_LIBS
@@ -14831,7 +15646,7 @@
save_LIBS=$LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing crypt" >&5
$as_echo_n "checking for library containing crypt... " >&6; }
-if test "${ac_cv_search_crypt+set}" = set; then :
+if ${ac_cv_search_crypt+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
@@ -14865,11 +15680,11 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_crypt+set}" = set; then :
+ if ${ac_cv_search_crypt+:} false; then :
break
fi
done
-if test "${ac_cv_search_crypt+set}" = set; then :
+if ${ac_cv_search_crypt+:} false; then :
else
ac_cv_search_crypt=no
@@ -14886,7 +15701,7 @@
for ac_header in crypt.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "crypt.h" "ac_cv_header_crypt_h" "$ac_includes_default"
-if test "x$ac_cv_header_crypt_h" = x""yes; then :
+if test "x$ac_cv_header_crypt_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_CRYPT_H 1
_ACEOF
@@ -14914,7 +15729,7 @@
save_LIBS=$LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing sendfilev" >&5
$as_echo_n "checking for library containing sendfilev... " >&6; }
-if test "${ac_cv_search_sendfilev+set}" = set; then :
+if ${ac_cv_search_sendfilev+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
@@ -14948,11 +15763,11 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_sendfilev+set}" = set; then :
+ if ${ac_cv_search_sendfilev+:} false; then :
break
fi
done
-if test "${ac_cv_search_sendfilev+set}" = set; then :
+if ${ac_cv_search_sendfilev+:} false; then :
else
ac_cv_search_sendfilev=no
@@ -15007,7 +15822,7 @@
enableval=$enable_lfs; case "${enableval}" in
yes) CPPFLAGS="${CPPFLAGS} -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGE_FILES" ;;
no) ;;
- *) as_fn_error $? "bad value ${enableval} for --enable-lfs" "$LINENO" 5 ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-lfs" "$LINENO" 5 ;;
esac
else
CPPFLAGS="${CPPFLAGS} -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGE_FILES"
@@ -15023,7 +15838,7 @@
# This bug is HP SR number 8606223364.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
$as_echo_n "checking size of long... " >&6; }
-if test "${ac_cv_sizeof_long+set}" = set; then :
+if ${ac_cv_sizeof_long+:} false; then :
$as_echo_n "(cached) " >&6
else
if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then :
@@ -15033,7 +15848,7 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "cannot compute sizeof (long)
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
ac_cv_sizeof_long=0
fi
@@ -15056,7 +15871,7 @@
# This bug is HP SR number 8606223364.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of off_t" >&5
$as_echo_n "checking size of off_t... " >&6; }
-if test "${ac_cv_sizeof_off_t+set}" = set; then :
+if ${ac_cv_sizeof_off_t+:} false; then :
$as_echo_n "(cached) " >&6
else
if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (off_t))" "ac_cv_sizeof_off_t" "$ac_includes_default"; then :
@@ -15066,7 +15881,7 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "cannot compute sizeof (off_t)
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
ac_cv_sizeof_off_t=0
fi
@@ -15092,7 +15907,7 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot run test program while cross compiling
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
@@ -15136,7 +15951,7 @@
enableval=$enable_ipv6; case "${enableval}" in
yes) ipv6=true ;;
no) ipv6=false ;;
- *) as_fn_error $? "bad value ${enableval} for --enable-ipv6" "$LINENO" 5 ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-ipv6" "$LINENO" 5 ;;
esac
else
ipv6=true
@@ -15146,7 +15961,7 @@
if test x$ipv6 = xtrue; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for IPv6 support" >&5
$as_echo_n "checking for IPv6 support... " >&6; }
-if test "${ac_cv_ipv6_support+set}" = set; then :
+if ${ac_cv_ipv6_support+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -15193,7 +16008,7 @@
fastcgi_found=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FCGI_Accept in -lfcgi" >&5
$as_echo_n "checking for FCGI_Accept in -lfcgi... " >&6; }
-if test "${ac_cv_lib_fcgi_FCGI_Accept+set}" = set; then :
+if ${ac_cv_lib_fcgi_FCGI_Accept+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -15227,7 +16042,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_fcgi_FCGI_Accept" >&5
$as_echo "$ac_cv_lib_fcgi_FCGI_Accept" >&6; }
-if test "x$ac_cv_lib_fcgi_FCGI_Accept" = x""yes; then :
+if test "x$ac_cv_lib_fcgi_FCGI_Accept" = xyes; then :
for ac_header in fastcgi.h fastcgi/fastcgi.h
do :
@@ -15267,7 +16082,7 @@
enableval=$enable_extra_warnings; case "${enableval}" in
yes) extrawarnings=true ;;
no) extrawarnings=false ;;
- *) as_fn_error $? "bad value ${enableval} for --enable-extra-warnings" "$LINENO" 5 ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-extra-warnings" "$LINENO" 5 ;;
esac
else
extrawarnings=false
@@ -15285,7 +16100,7 @@
_ACEOF
-ac_config_files="$ac_config_files Makefile src/Makefile doc/config/conf.d/Makefile doc/config/vhosts.d/Makefile doc/config/Makefile doc/scripts/Makefile doc/initscripts/Makefile doc/Makefile tests/Makefile tests/docroot/Makefile tests/docroot/123/Makefile tests/docroot/www/Makefile tests/docroot/www/go/Makefile tests/docroot/www/indexfile/Makefile tests/docroot/www/expire/Makefile distribute.sh"
+ac_config_files="$ac_config_files Makefile src/Makefile doc/config/conf.d/Makefile doc/config/vhosts.d/Makefile doc/config/Makefile doc/scripts/Makefile doc/initscripts/Makefile doc/outdated/Makefile doc/Makefile tests/Makefile tests/docroot/Makefile tests/docroot/123/Makefile tests/docroot/www/Makefile tests/docroot/www/go/Makefile tests/docroot/www/indexfile/Makefile tests/docroot/www/expire/Makefile distribute.sh"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@@ -15351,10 +16166,21 @@
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
+ if test "x$cache_file" != "x/dev/null"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
@@ -15413,7 +16239,7 @@
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
@@ -15514,6 +16340,7 @@
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -15820,8 +16647,8 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by lighttpd $as_me 1.4.28, which was
-generated by GNU Autoconf 2.67. Invocation command line was
+This file was extended by lighttpd $as_me 1.4.29, which was
+generated by GNU Autoconf 2.68. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -15886,8 +16713,8 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-lighttpd config.status 1.4.28
-configured by $0, generated by GNU Autoconf 2.67,
+lighttpd config.status 1.4.29
+configured by $0, generated by GNU Autoconf 2.68,
with options \\"\$ac_cs_config\\"
Copyright (C) 2010 Free Software Foundation, Inc.
@@ -16015,134 +16842,156 @@
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
# Quote evaled strings.
for var in SED \
GREP \
EGREP \
FGREP \
+SHELL \
+ECHO \
LD \
NM \
LN_S \
@@ -16152,8 +17001,13 @@
OBJDUMP \
deplibs_check_method \
file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
AR \
AR_FLAGS \
+archiver_list_spec \
STRIP \
RANLIB \
CC \
@@ -16163,14 +17017,14 @@
lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
+nm_file_list_spec \
lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
lt_prog_compiler_wl \
-lt_prog_compiler_pic \
lt_prog_compiler_static \
lt_cv_prog_compiler_c_o \
need_locks \
+MANIFEST_TOOL \
DSYMUTIL \
NMEDIT \
LIPO \
@@ -16186,7 +17040,6 @@
hardcode_libdir_flag_spec \
hardcode_libdir_flag_spec_ld \
hardcode_libdir_separator \
-fix_srcfile_path \
exclude_expsyms \
include_expsyms \
file_list_spec \
@@ -16194,12 +17047,13 @@
libname_spec \
library_names_spec \
soname_spec \
+install_override_mode \
finish_eval \
old_striplib \
striplib; do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -16221,14 +17075,15 @@
module_expsym_cmds \
export_symbols_cmds \
prelink_cmds \
+postlink_cmds \
postinstall_cmds \
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
sys_lib_dlsearch_path_spec; do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -16236,12 +17091,6 @@
esac
done
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
- ;;
-esac
-
ac_aux_dir='$ac_aux_dir'
xsi_shell='$xsi_shell'
lt_shell_append='$lt_shell_append'
@@ -16280,6 +17129,7 @@
"doc/config/Makefile") CONFIG_FILES="$CONFIG_FILES doc/config/Makefile" ;;
"doc/scripts/Makefile") CONFIG_FILES="$CONFIG_FILES doc/scripts/Makefile" ;;
"doc/initscripts/Makefile") CONFIG_FILES="$CONFIG_FILES doc/initscripts/Makefile" ;;
+ "doc/outdated/Makefile") CONFIG_FILES="$CONFIG_FILES doc/outdated/Makefile" ;;
"doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
"tests/docroot/Makefile") CONFIG_FILES="$CONFIG_FILES tests/docroot/Makefile" ;;
@@ -16290,7 +17140,7 @@
"tests/docroot/www/expire/Makefile") CONFIG_FILES="$CONFIG_FILES tests/docroot/www/expire/Makefile" ;;
"distribute.sh") CONFIG_FILES="$CONFIG_FILES distribute.sh" ;;
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
@@ -16313,9 +17163,10 @@
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- tmp=
+ tmp= ac_tmp=
trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
@@ -16323,12 +17174,13 @@
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
+ test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
@@ -16350,7 +17202,7 @@
ac_cs_awk_cr=$ac_cr
fi
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF
@@ -16378,7 +17230,7 @@
rm -f conf$$subs.sh
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
@@ -16426,7 +17278,7 @@
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = ""
@@ -16458,7 +17310,7 @@
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
|| as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
@@ -16492,7 +17344,7 @@
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
_ACEOF
@@ -16504,8 +17356,8 @@
# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
- ac_t=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_t"; then
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
break
elif $ac_last_try; then
as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
@@ -16606,7 +17458,7 @@
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -16625,7 +17477,7 @@
for ac_f
do
case $ac_f in
- -) ac_f="$tmp/stdin";;
+ -) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
@@ -16634,7 +17486,7 @@
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
@@ -16660,8 +17512,8 @@
esac
case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -16797,21 +17649,22 @@
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&2;}
- rm -f "$tmp/stdin"
+ rm -f "$ac_tmp/stdin"
case $ac_file in
- -) cat "$tmp/out" && rm -f "$tmp/out";;
- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
@@ -16822,20 +17675,20 @@
if test x"$ac_file" != x-; then
{
$as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
- } >"$tmp/config.h" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
- mv "$tmp/config.h" "$ac_file" \
+ mv "$ac_tmp/config.h" "$ac_file" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
|| as_fn_error $? "could not create -" "$LINENO" 5
fi
# Compute "$ac_file"'s index in $config_headers.
@@ -16997,7 +17850,8 @@
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
@@ -17044,6 +17898,12 @@
# A literal string matcher.
FGREP=$lt_FGREP
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
# Whether or not to build static libraries.
build_old_libs=$enable_static
@@ -17094,23 +17954,42 @@
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
# An object symbol dumper.
OBJDUMP=$lt_OBJDUMP
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
-# Command to use when deplibs_check_method == "file_magic".
+# Command to use when deplibs_check_method = "file_magic".
file_magic_cmd=$lt_file_magic_cmd
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
# The archiver.
AR=$lt_AR
+
+# Flags to create an archive.
AR_FLAGS=$lt_AR_FLAGS
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
# A symbol stripping program.
STRIP=$lt_STRIP
@@ -17119,6 +17998,9 @@
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
# A C compiler.
LTCC=$lt_CC
@@ -17137,21 +18019,24 @@
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
# The name of the directory that contains temporary libtool files.
objdir=$objdir
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
-
# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD
# Must we lock files when doing compilation?
need_locks=$lt_need_locks
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL
@@ -17208,6 +18093,9 @@
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds
@@ -17247,6 +18135,10 @@
# The linker used to build libraries.
LD=$lt_LD
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds
@@ -17259,12 +18151,12 @@
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static
@@ -17351,9 +18243,6 @@
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols
@@ -17369,6 +18258,9 @@
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec
@@ -17401,212 +18293,169 @@
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
- case $xsi_shell in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
+ if test x"$xsi_shell" = xyes; then
+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
-}
-# func_basename file
-func_basename ()
-{
- func_basename_result="${1##*/}"
-}
+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"
-}
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}
-}
+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=${1%%=*}
- func_opt_split_arg=${1#*=}
-}
-# func_lo2o object
-func_lo2o ()
-{
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac
-}
+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\ # positional parameters, so assign one to ordinary parameter first.\
+\ func_stripname_result=${3}\
+\ func_stripname_result=${func_stripname_result#"${1}"}\
+\ func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=${1%.*}.lo
-}
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=$(( $* ))
-}
+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\ func_split_long_opt_name=${1%%=*}\
+\ func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=${#1}
-}
-_LT_EOF
- ;;
- *) # Bourne compatible functions.
- cat << \_LT_EOF >> "$cfgfile"
+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\ func_split_short_opt_arg=${1#??}\
+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-}
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\ case ${1} in\
+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\ *) func_lo2o_result=${1} ;;\
+\ esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
- esac
-}
+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+ func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+ func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
-}
+ sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+ func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "$@"`
-}
+fi
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
+if test x"$lt_shell_append" = xyes; then
+ sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+ eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-_LT_EOF
-esac
-case $lt_shell_append in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\ func_quote_for_eval "${2}"\
+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$1+=\$2"
-}
-_LT_EOF
- ;;
- *)
- cat << \_LT_EOF >> "$cfgfile"
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$1=\$$1\$2"
-}
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
-_LT_EOF
- ;;
- esac
+if test x"$_lt_function_replace_fail" = x":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" ||
+ mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
Modified: lighttpd/trunk/configure.ac
===================================================================
--- lighttpd/trunk/configure.ac 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/configure.ac 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,7 +1,7 @@
dnl -*- Autoconf -*-
dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.57)
-AC_INIT([lighttpd], [1.4.28], [contact at lighttpd.net])
+AC_INIT([lighttpd], [1.4.29], [contact at lighttpd.net])
AC_CONFIG_SRCDIR([src/server.c])
AC_CONFIG_HEADER([config.h])
AC_CONFIG_MACRO_DIR([m4])
@@ -57,7 +57,7 @@
AC_CHECK_HEADERS([arpa/inet.h fcntl.h netinet/in.h stdlib.h string.h \
sys/socket.h sys/time.h unistd.h sys/sendfile.h sys/uio.h \
getopt.h sys/epoll.h sys/select.h poll.h sys/poll.h sys/devpoll.h sys/filio.h \
-sys/mman.h sys/event.h sys/port.h pwd.h sys/syslimits.h \
+sys/mman.h sys/event.h port.h pwd.h sys/syslimits.h \
sys/resource.h sys/un.h syslog.h sys/prctl.h uuid/uuid.h])
dnl Checks for typedefs, structures, and compiler characteristics.
@@ -105,7 +105,7 @@
LIBEV_LIBS="-L$WITH_LIBEV/lib -lev"
else
AC_CHECK_HEADERS([ev.h],[
- AC_CHECK_LIB([ev], [ev_loop], [
+ AC_CHECK_LIB([ev], [ev_time], [
LIBEV_CFLAGS=""
LIBEV_LIBS="-lev"
],[
@@ -610,6 +610,7 @@
doc/config/Makefile \
doc/scripts/Makefile \
doc/initscripts/Makefile \
+ doc/outdated/Makefile \
doc/Makefile \
tests/Makefile \
tests/docroot/Makefile \
Modified: lighttpd/trunk/debian/changelog
===================================================================
--- lighttpd/trunk/debian/changelog 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/debian/changelog 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,5 +1,6 @@
-lighttpd (1.4.28-6) UNRELEASED; urgency=low
+lighttpd (1.4.29-1) UNRELEASED; urgency=low
+ * New upstream release
* Fix "lighty-enable-mod should return non-zero on fail" Update script to
leave with appropriate exit status (Closes: #629638)
Modified: lighttpd/trunk/debian/control
===================================================================
--- lighttpd/trunk/debian/control 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/debian/control 2011-07-03 23:55:35 UTC (rev 544)
@@ -12,7 +12,7 @@
liblua5.1-0-dev, pkg-config, uuid-dev, libsqlite3-dev,
libxml2-dev, libkrb5-dev, perl
Vcs-Svn: svn://svn.debian.org/pkg-lighttpd/lighttpd/trunk
-Vcs-Browser: http://svn.debian.org/wsvn/pkg-lighttpd/lighttpd/
+Vcs-Browser: http://anonscm.debian.org/viewvc/pkg-lighttpd/lighttpd/trunk/
Standards-Version: 3.9.2.0
Package: lighttpd
Modified: lighttpd/trunk/doc/Makefile.am
===================================================================
--- lighttpd/trunk/doc/Makefile.am 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/Makefile.am 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,101 +1,6 @@
-SUBDIRS=config scripts initscripts
+SUBDIRS=config scripts initscripts outdated
dist_man8_MANS=lighttpd.8
-DOCS=accesslog.txt \
-authentication.txt \
-cgi.txt \
-compress.txt \
-configuration.txt \
-extforward.txt \
-fastcgi-state.txt \
-fastcgi.txt \
-features.txt \
-performance.txt \
-plugins.txt \
-proxy.txt \
-redirect.txt \
-rewrite.txt \
-secdownload.txt \
-security.txt \
-simple-vhost.txt \
-skeleton.txt \
-ssi.txt \
-ssl.txt \
-state.txt \
-rrdtool.txt \
-alias.txt \
-userdir.txt \
-mysqlvhost.txt \
-access.txt \
-traffic-shaping.txt \
-setenv.txt \
-status.txt \
-scgi.txt \
-cml.txt \
-trigger_b4_dl.txt \
-webdav.txt \
-expire.txt \
-dirlisting.txt \
-evhost.txt \
-magnet.txt
-
-HTMLDOCS=accesslog.html \
- authentication.html \
- cgi.html \
- compress.html \
- configuration.html \
- extforward.html \
- fastcgi-state.html \
- fastcgi.html \
- features.html \
- performance.html \
- plugins.html \
- proxy.html \
- redirect.html \
- rewrite.html \
- secdownload.html \
- security.html \
- simple-vhost.html \
- skeleton.html \
- ssi.html \
- ssl.html \
- state.html \
- rrdtool.html \
- alias.html \
- userdir.html \
- mysqlvhost.html \
- access.html \
- traffic-shaping.html \
- setenv.html \
- status.html \
- scgi.html \
- cml.html \
- trigger_b4_dl.html \
- webdav.html \
- expire.html \
- dirlisting.html \
- evhost.html \
- magnet.html
-
EXTRA_DIST= \
- state.dot fastcgi-state.dot \
newstyle.css \
- oldstyle.css \
- $(DOCS)
-
-.txt.html:
- rst2html $^ > $@
-
-
-html-local: $(HTMLDOCS)
-
-#%.ps.gz: %.ps
-# gzip $^
-
-#%.ps: %.dot
-# dot -Tps -o $@ $^
-
-clean-local:
- rm -f *.html
-
-
+ oldstyle.css
Modified: lighttpd/trunk/doc/Makefile.in
===================================================================
--- lighttpd/trunk/doc/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -141,6 +141,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -174,6 +175,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -217,6 +219,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -249,7 +252,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -269,94 +271,15 @@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-SUBDIRS = config scripts initscripts
+SUBDIRS = config scripts initscripts outdated
dist_man8_MANS = lighttpd.8
-DOCS = accesslog.txt \
-authentication.txt \
-cgi.txt \
-compress.txt \
-configuration.txt \
-extforward.txt \
-fastcgi-state.txt \
-fastcgi.txt \
-features.txt \
-performance.txt \
-plugins.txt \
-proxy.txt \
-redirect.txt \
-rewrite.txt \
-secdownload.txt \
-security.txt \
-simple-vhost.txt \
-skeleton.txt \
-ssi.txt \
-ssl.txt \
-state.txt \
-rrdtool.txt \
-alias.txt \
-userdir.txt \
-mysqlvhost.txt \
-access.txt \
-traffic-shaping.txt \
-setenv.txt \
-status.txt \
-scgi.txt \
-cml.txt \
-trigger_b4_dl.txt \
-webdav.txt \
-expire.txt \
-dirlisting.txt \
-evhost.txt \
-magnet.txt
-
-HTMLDOCS = accesslog.html \
- authentication.html \
- cgi.html \
- compress.html \
- configuration.html \
- extforward.html \
- fastcgi-state.html \
- fastcgi.html \
- features.html \
- performance.html \
- plugins.html \
- proxy.html \
- redirect.html \
- rewrite.html \
- secdownload.html \
- security.html \
- simple-vhost.html \
- skeleton.html \
- ssi.html \
- ssl.html \
- state.html \
- rrdtool.html \
- alias.html \
- userdir.html \
- mysqlvhost.html \
- access.html \
- traffic-shaping.html \
- setenv.html \
- status.html \
- scgi.html \
- cml.html \
- trigger_b4_dl.html \
- webdav.html \
- expire.html \
- dirlisting.html \
- evhost.html \
- magnet.html
-
EXTRA_DIST = \
- state.dot fastcgi-state.dot \
newstyle.css \
- oldstyle.css \
- $(DOCS)
+ oldstyle.css
all: all-recursive
.SUFFIXES:
-.SUFFIXES: .html .txt
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
@@ -669,7 +592,7 @@
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
@@ -681,7 +604,7 @@
html: html-recursive
-html-am: html-local
+html-am:
info: info-recursive
@@ -740,34 +663,20 @@
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
- clean-local ctags ctags-recursive distclean distclean-generic \
+ ctags ctags-recursive distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am html-local info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man8 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
- ps ps-am tags tags-recursive uninstall uninstall-am \
- uninstall-man uninstall-man8
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-man8 install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am uninstall-man \
+ uninstall-man8
-.txt.html:
- rst2html $^ > $@
-
-html-local: $(HTMLDOCS)
-
-#%.ps.gz: %.ps
-# gzip $^
-
-#%.ps: %.dot
-# dot -Tps -o $@ $^
-
-clean-local:
- rm -f *.html
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Deleted: lighttpd/trunk/doc/access.txt
===================================================================
--- lighttpd/trunk/doc/access.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/access.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,41 +0,0 @@
-======
-Access
-======
-
-------------------
-Module: mod_access
-------------------
-
-:Author: Allan Wind
-:Date: $Date: 2005/01/30 11:34:32 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- The access module is used to deny access to files with given trailing path names.
-
-.. meta::
- :keywords: lighttpd, trailing path access control
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-The access module is used to deny access to files with given trailing path names.
-
-Options
-=======
-
-url.access-deny
- Denies access to all files with any of given trailing path names.
-
- Default: empty
-
- Example: ::
-
- url.access-deny = ( "~", ".inc")
-
- will deny access to all files ended with a diacritical mark (~) or .inc
- such as example~ or example.inc. A trailing diacritical mark is often
- used by editors for backup files. And the .inc extension is often used
- for include files with code.
Deleted: lighttpd/trunk/doc/accesslog.txt
===================================================================
--- lighttpd/trunk/doc/accesslog.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/accesslog.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,126 +0,0 @@
-=========
-Accesslog
-=========
-
----------------------
-Module: mod_accesslog
----------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- The accesslog module ...
-
-.. meta::
- :keywords: lighttpd, accesslog, CLF
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-CLF like by default, flexible like apache
-
-Options
-=======
-
-accesslog.use-syslog
- send the accesslog to syslog
-
- Default: disabled
-
-accesslog.filename
- name of the file where the accesslog should be written too if syslog
- is not used.
-
- if the name starts with a '|' the rest of the name is taken
- as the name of a process which will be spawn and will get the
- output
-
- e.g.: ::
-
- accesslog.filename = "/var/log/lighttpd.log"
-
- $HTTP["host"] == "mail.example.org" {
- accesslog.filename = "|/usr/bin/cronolog"
- }
-
- Default: disabled
-
-accesslog.format
- the format of the logfile
-
- ====== ================================
- Option Description
- ====== ================================
- %% a percent sign
- %h name or address of remote-host
- %l ident name (not supported)
- %u authenticated user
- %t timestamp for the request-start
- %r request-line
- %s status code
- %b bytes sent for the body
- %i HTTP-header field
- %a remote address
- %A local address
- %B same as %b
- %C cookie field (not supported)
- %D time used in ms (not supported)
- %e environment (not supported)
- %f phyiscal filename
- %H request protocol (HTTP/1.0, ...)
- %m request method (GET, POST, ...)
- %n (not supported)
- %o `response header`_
- %p server port
- %P (not supported)
- %q query string
- %T time used in seconds
- %U request URL
- %v server-name
- %V (not supported)
- %X connection status
- %I bytes incomming
- %O bytes outgoing
- ====== ================================
-
- If %s is written %>s or %<s the < and the > are ignored. They are support
- for compat with apache.
-
- %i and %o expect the name of the field which should be written in curly brackets.
-
- e.g.: ::
-
- accesslog.format = "%h %l %u %t \"%r\" %b %>s \"%{User-Agent}i\" \"%{Referer}i\""
-
- Default: CLF compatible output
-
-Response Header
----------------
-
-The accesslog module provides a special way to log content from the
-application in a accesslog file. It can be used to log the session id into a
-logfile.
-
-If you want to log it into the accesslog just specify the field-name within
-a %{...}o like ::
-
- accesslog.format = "%h %l %u %t \"%r\" %b %>s \"%{User-Agent}i\" \"%{Referer}i\" \"%{X-LIGHTTPD-SID}o\""
-
-The prefix ``X-LIGHTTPD-`` is special as every response header starting with
-this prefix is assumed to be special for lighttpd and won't be sent out
-to the client.
-
-An example the use this functionality is provided below: ::
-
- <?php
-
- session_start();
-
- header("X-LIGHTTPD-SID: ".session_id());
-
- ?>
-
Deleted: lighttpd/trunk/doc/alias.txt
===================================================================
--- lighttpd/trunk/doc/alias.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/alias.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,36 +0,0 @@
-=====
-Alias
-=====
-
------------------
-Module: mod_alias
------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:43:49 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- The alias module ...
-
-.. meta::
- :keywords: lighttpd, alias
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-The alias module is used to specify a special document-root for a given url-subset.
-
-Options
-=======
-
-alias.url
- rewrites the document-root for a URL-subset
-
- Default: empty
-
- Example: ::
-
- alias.url = ( "/cgi-bin/" => "/var/www/servers/www.example.org/cgi-bin/" )
Deleted: lighttpd/trunk/doc/authentication.txt
===================================================================
--- lighttpd/trunk/doc/authentication.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/authentication.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,207 +0,0 @@
-====================
-Using Authentication
-====================
-
-----------------
-Module: mod_auth
-----------------
-
-:Author: Jan Kneschke
-:Date: $Date$
-:Revision: $Revision$
-
-:abstract:
- The auth module provides ...
-
-.. meta::
- :keywords: lighttpd, authentication
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Supported Methods
------------------
-
-lighttpd supportes both authentication method described by
-RFC 2617:
-
-basic
-`````
-
-The Basic method transfers the username and the password in
-cleartext over the network (base64 encoded) and might result
-in security problems if not used in conjunction with a crypted
-channel between client and server.
-
-digest
-``````
-
-The Digest method only transfers a hashed value over the
-network which performs a lot of work to harden the
-authentication process in insecure networks.
-
-Backends
---------
-
-Depending on the method lighttpd provides various way to store
-the credentials used for the authentication.
-
-for basic auth:
-
-- plain_
-- htpasswd_
-- htdigest_
-- ldap_
-
-for digest auth:
-
-- plain_
-- htdigest_
-
-
-plain
-`````
-
-A file which contains username and the cleartext password
-seperated by a colon. Each entry is terminated by a single
-newline.::
-
- e.g.:
- agent007:secret
-
-
-htpasswd
-````````
-
-A file which contains username and the crypt()'ed password
-seperated by a colon. Each entry is terminated by a single
-newline. ::
-
- e.g.:
- agent007:XWY5JwrAVBXsQ
-
-You can use htpasswd from the apache distribution to manage
-those files. ::
-
- $ htpasswd lighttpd.user.htpasswd agent007
-
-
-htdigest
-````````
-
-A file which contains username, realm and the md5()'ed
-password seperated by a colon. Each entry is terminated
-by a single newline. ::
-
- e.g.:
- agent007:download area:8364d0044ef57b3defcfa141e8f77b65
-
-You can use htdigest from the apache distribution to manage
-those files. ::
-
- $ htdigest lighttpd.user.htdigest 'download area' agent007
-
-Using md5sum can also generate the password-hash: ::
-
- #!/bin/sh
- user=$1
- realm=$2
- pass=$3
-
- hash=`echo -n "$user:$realm:$pass" | md5sum | cut -b -32`
-
- echo "$user:$realm:$hash"
-
-To use it:
-
- $ htdigest.sh 'agent007' 'download area' 'secret'
- agent007:download area:8364d0044ef57b3defcfa141e8f77b65
-
-
-
-ldap
-````
-
-the ldap backend is basically performing the following steps
-to authenticate a user
-
-1. connect anonymously (at plugin init)
-2. get DN for filter = username
-3. auth against ldap server
-4. disconnect
-
-if all 4 steps are performed without any error the user is
-authenticated
-
-Configuration
-=============
-
-::
-
- ## debugging
- # 0 for off, 1 for 'auth-ok' messages, 2 for verbose debugging
- auth.debug = 0
-
- ## type of backend
- # plain, htpasswd, ldap or htdigest
- auth.backend = "htpasswd"
-
- # filename of the password storage for
- # plain
- auth.backend.plain.userfile = "lighttpd-plain.user"
-
- ## for htpasswd
- auth.backend.htpasswd.userfile = "lighttpd-htpasswd.user"
-
- ## for htdigest
- auth.backend.htdigest.userfile = "lighttpd-htdigest.user"
-
- ## for ldap
- # the $ in auth.backend.ldap.filter is replaced by the
- # 'username' from the login dialog
- auth.backend.ldap.hostname = "localhost"
- auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
- auth.backend.ldap.filter = "(uid=$)"
- # if enabled, startTLS needs a valid (base64-encoded) CA
- # certificate
- auth.backend.ldap.starttls = "enable"
- auth.backend.ldap.ca-file = "/etc/CAcertificate.pem"
-
- ## restrictions
- # set restrictions:
- #
- # ( <left-part-of-the-url> =>
- # ( "method" => "digest"/"basic",
- # "realm" => <realm>,
- # "require" => "user=<username>" )
- # )
- #
- # <realm> is a string to display in the dialog
- # presented to the user and is also used for the
- # digest-algorithm and has to match the realm in the
- # htdigest file (if used)
- #
-
- auth.require = ( "/download/" =>
- (
- "method" => "digest",
- "realm" => "download archiv",
- "require" => "user=agent007|user=agent008"
- ),
- "/server-info" =>
- (
- "method" => "digest",
- "realm" => "download archiv",
- "require" => "valid-user"
- )
- )
-
-Limitations
-============
-
-- The implementation of digest method is currently not
- completely compliant with the standard as it still allows
- a replay attack.
-
Deleted: lighttpd/trunk/doc/cgi.txt
===================================================================
--- lighttpd/trunk/doc/cgi.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/cgi.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,50 +0,0 @@
-===
-CGI
-===
-
----------------
-Module: mod_cgi
----------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- The cgi module provides a CGI-conforming interface.
-
-.. meta::
- :keywords: lighttpd, cgi
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-CGI programs allow you to enhance the functionality of the server in a very
-straight and simple way..
-
-Options
-=======
-
-cgi.assign
-
- file-extensions that are handled by a CGI program
-
- e.g.: ::
-
- cgi.assign = ( ".pl" => "/usr/bin/perl",
- ".cgi" => "/usr/bin/perl" )
-
-Examples
-========
-
-To setup a executable which doesn't need the help of a external program you
-just don't specify a handler for the extension. ::
-
- cgi.assign = ( ".sh" => "" )
-
-If the file has no extension keep in mind that lighttpd matches not the
-extension itself but the right part of the URL: ::
-
- cgi.assign = ( "/testfile" => "" )
Deleted: lighttpd/trunk/doc/cml.txt
===================================================================
--- lighttpd/trunk/doc/cml.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/cml.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,261 +0,0 @@
-=========================
-CML (Cache Meta Language)
-=========================
-
----------------
-Module: mod_cml
----------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- CML is a Meta language to describe the dependencies of a page at one side and building a page from its fragments on the other side using LUA.
-
-.. meta::
- :keywords: lighttpd, cml, lua
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-CML (Cache Meta Language) wants to solves several problems:
-
- * dynamic content needs caching to perform
- * checking if the content is dirty inside of the application is usually more expensive than sending out the cached data
- * a dynamic page is usually fragmented and the fragments have different livetimes
- * the different fragements can be cached independently
-
-Cache Decision
---------------
-
-A simple example should show how to a content caching the very simple way in PHP.
-
-jan.kneschke.de has a very simple design:
-
- * the layout is taken from a template in templates/jk.tmpl
- * the menu is generated from a menu.csv file
- * the content is coming from files on the local directory named content-1, content-2 and so on
-
-The page content is static as long non of the those tree items changes. A change in the layout
-is affecting all pages, a change of menu.csv too, a change of content-x file only affects the
-cached page itself.
-
-If we model this in PHP we get: ::
-
- <?php
-
- ## ... fetch all content-* files into $content
- $cachefile = "/cache/dir/to/cached-content";
-
- function is_cachable($content, $cachefile) {
- if (!file_exists($cachefile)) {
- return 0;
- } else {
- $cachemtime = filemtime($cachefile);
- }
-
- foreach($content as $k => $v) {
- if (isset($v["file"]) &&
- filemtime($v["file"]) > $cachemtime) {
- return 0;
- }
- }
-
- if (filemtime("/menu/menu.csv") > $cachemtime) {
- return 0;
- }
- if (filemtime("/templates/jk.tmpl") > $cachemtime) {
- return 0;
- }
- }
-
- if (is_cachable(...), $cachefile) {
- readfile($cachefile);
- exit();
- } else {
- # generate content and write it to $cachefile
- }
- ?>
-
-Quite simple. No magic involved. If the one of the files is new than the cached
-content, the content is dirty and has to be regenerated.
-
-Now let take a look at the numbers:
-
- * 150 req/s for a Cache-Hit
- * 100 req/s for a Cache-Miss
-
-As you can see the increase is not as good as it could be. The main reason as the overhead
-of the PHP interpreter to start up (a byte-code cache has been used here).
-
-Moving these decisions out of the PHP script into a server module will remove the need
-to start PHP for a cache-hit.
-
-To transform this example into a CML you need 'index.cml' in the list of indexfiles
-and the following index.cml file: ::
-
- output_contenttype = "text/html"
-
- b = request["DOCUMENT_ROOT"]
- cwd = request["CWD"]
-
- output_include = { b .. "_cache.html" }
-
- trigger_handler = "index.php"
-
- if file_mtime(b .. "../lib/php/menu.csv") > file_mtime(cwd .. "_cache.html") or
- file_mtime(b .. "templates/jk.tmpl") > file_mtime(cwd .. "_cache.html") or
- file_mtime(b .. "content.html") > file_mtime(cwd .. "_cache.html") then
- return CACHE_MISS
- else
- return CACHE_HIT
- end
-
-Numbers again:
-
- * 4900 req/s for Cache-Hit
- * 100 req/s for Cache-Miss
-
-Content Assembling
-------------------
-
-Sometimes the different fragment are already generated externally. You have to cat them together: ::
-
- <?php
- readfile("head.html");
- readfile("menu.html");
- readfile("spacer.html");
- readfile("db-content.html");
- readfile("spacer2.html");
- readfile("news.html");
- readfile("footer.html");
- ?>
-
-We we can do the same several times faster directly in the webserver.
-
-Don't forget: Webserver are built to send out static content, that is what they can do best.
-
-The index.cml for this looks like: ::
-
- output_contenttype = "text/html"
-
- cwd = request["CWD"]
-
- output_include = { cwd .. "head.html",
- cwd .. "menu.html",
- cwd .. "spacer.html",
- cwd .. "db-content.html",
- cwd .. "spacer2.html",
- cwd .. "news.html",
- cwd .. "footer.html" }
-
- return CACHE_HIT
-
-Now we get about 10000 req/s instead of 600 req/s.
-
-Power Magnet
-------------
-
-Next to all the features about Cache Decisions CML can do more. Starting
-with lighttpd 1.4.9 a power-magnet was added which attracts each request
-and allows you to manipulate the request for your needs.
-
-We want to display a maintainance page by putting a file in a specified
-place:
-
-We enable the power magnet: ::
-
- cml.power-magnet = "/home/www/power-magnet.cml"
-
-and create /home/www/power-magnet.cml with: ::
-
- dr = request["DOCUMENT_ROOT"]
-
- if file_isreg(dr .. 'maintainance.html') then
- output_include = { 'maintainance.html' }
- return CACHE_HIT
- end
-
- return CACHE_MISS
-
-For each requested file the /home/www/power-magnet.cml is executed which
-checks if maintainance.html exists in the docroot and displays it
-instead of handling the usual request.
-
-Another example, create thumbnail for requested image and serve it instead
-of sending the big image: ::
-
- ## image-url is /album/baltic_winter_2005.jpg
- ## no params -> 640x480 is served
- ## /album/baltic_winter_2005.jpg/orig for full size
- ## /album/baltic_winter_2005.jpg/thumb for thumbnail
-
- dr = request["DOCUMENT_ROOT"]
- sn = request["SCRIPT_NAME"]
-
- ## to be continued :) ...
-
- trigger_handler = '/gen_image.php'
-
- return CACHE_MISS
-
-
-Installation
-============
-
-You need `lua <http://www.lua.org/>`_ and should install `libmemcache-1.3.x <http://people.freebsd.org/~seanc/libmemcache/>`_ and have to configure lighttpd with: ::
-
- ./configure ... --with-lua --with-memcache
-
-To use the plugin you have to load it: ::
-
- server.modules = ( ..., "mod_cml", ... )
-
-Options
-=======
-
-:cml.extension:
- the file extension that is bound to the cml-module
-:cml.memcache-hosts:
- hosts for the memcache.* functions
-:cml.memcache-namespace:
- (not used yet)
-:cml.power-magnet:
- a cml file that is executed for each request
-
-Language
-========
-
-The language used for CML is provided by `LUA <http://www.lua.org/>`_.
-
-Additionally to the functions provided by lua mod_cml provides: ::
-
- tables:
-
- request
- - REQUEST_URI
- - SCRIPT_NAME
- - SCRIPT_FILENAME
- - DOCUMENT_ROOT
- - PATH_INFO
- - CWD
- - BASEURI
-
- get
- - parameters from the query-string
-
- functions:
- string md5(string)
- number file_mtime(string)
- string memcache_get_string(string)
- number memcache_get_long(string)
- boolean memcache_exists(string)
-
-
-What ever your script does, it has to return either CACHE_HIT or CACHE_MISS.
-It case a error occures check the error-log, the user will get a error 500. If you don't like
-the standard error-page use ``server.errorfile-prefix``.
-
Deleted: lighttpd/trunk/doc/compress.txt
===================================================================
--- lighttpd/trunk/doc/compress.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/compress.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,192 +0,0 @@
-==================
-Output Compression
-==================
-
---------------------
-Module: mod_compress
---------------------
-
-
-.. meta::
- :keywords: lighttpd, compress
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Output compression reduces the network load and can improve the overall
-throughput of the webserver. All major http-clients support compression by
-announcing it in the Accept-Encoding header. This is used to negotiate the
-most suitable compression method. We support deflate, gzip and bzip2.
-
-deflate (RFC1950, RFC1951) and gzip (RFC1952) depend on zlib while bzip2
-depends on libbzip2. bzip2 is only supported by lynx and some other console
-text-browsers.
-
-We currently limit to compression support to static files.
-
-Caching
--------
-
-mod_compress can store compressed files on disk to optimize the compression
-on a second request away. As soon as compress.cache-dir is set the files are
-compressed.
-
-(You will need to create the cache directory if it doesn't already exist. The web server will not do this for you. The directory will also need the proper ownership. For Debian/Ubuntu the user and group ids should both be www-data.)
-
-The names of the cache files are made of the filename, the compression method
-and the etag associated to the file.
-
-Cleaning the cache is left to the user. A cron job deleting files older than
-10 days could do it: ::
-
- find /var/www/cache -type f -mtime +10 | xargs -r rm
-
-Limitations
------------
-
-The module limits the compression of files to files smaller than 128 MByte and
-larger than 128 Byte.
-
-The lower limit is set as small files tend to become larger by compressing due
-to the compression headers, the upper limit is set to work sensibly with
-memory and cpu-time.
-
-Directories containing a tilde ('~') are not created automatically (See ticket
-#113). To enable compression for user dirs you have to create the directories
-by hand in the cache directory.
-
-Options
-=======
-
-compress.allowed-encodings
- override default set of allowed encodings
-
- e.g.: ::
-
- compress.allowed-encodings = ("bzip2", "gzip", "deflate")
-
-compress.cache-dir
- name of the directory where compressed content will be cached
-
- e.g.: ::
-
- compress.cache-dir = "/var/www/cache/"
-
- # even better with virt-hosting
- $HTTP["host"] == "docs.example.org" {
- compress.cache-dir = "/var/www/cache/docs.example.org/"
- }
-
- Default: not set, compress the file for every request
-
-compress.filetype
- mimetypes which might get compressed
-
- e.g.: ::
-
- compress.filetype = ("text/plain", "text/html")
-
- Keep in mind that compressed JavaScript and CSS files are broken in some
- browsers. Not setting any filetypes will result in no files being compressed.
-
- NOTE: You have to specify the full mime-type! If you also define a charset, for example, you have to use "text/plain; charset=utf-8" instead of just "text/plain".
-
- Default: not set
-
-compress.max-filesize
- maximum size of the original file to be compressed kBytes.
-
- This is meant to protect the server against DoSing as compressing large
- (let's say 1Gbyte) takes a lot of time and would delay the whole operation
- of the server.
-
- There is a hard upper limit of 128Mbyte.
-
- Default: unlimited (== hard-limit of 128MByte)
-
-Display compressed files
-========================
-
-If you enable mod_compress, and you want to force clients to uncompress and display compressed text files, please force mimetype to nothing.
-Exemple :
-If you want to add headers for uncompress and display diff.gz files , add this section in your conf : ::
-
- $HTTP["url"] =~ "\.diff\.gz" {
- setenv.add-response-header = ( "Content-Encoding" => "gzip" )
- mimetype.assign = ()
- }
-
-
-Compressing Dynamic Content
-===========================
-
-PHP
----
-
-To compress dynamic content with PHP please enable ::
-
- zlib.output_compression = 1
- zlib.output_handler = On
-
-in the php.ini as PHP provides compression support by itself.
-
-mod_compress of lighttpd 1.5 r1992 may not set correct Content-Encoding with php-fcgi. A solution to that problem would be:
-
-1.disable mod_compress when request a php file::
-
- $HTTP["url"] !~ "\.php$" {
- compress.filetype = ("text/plain", "text/html", "text/javascript", "text/css", "text/xml")
- }
-
-2.enable mod_setenv of your lighttpd::
-
- server.modules += ( "mod_setenv" )
-
-3.manually set Content-Encoding::
-
- $HTTP["url"] =~ "\.php$" {
- setenv.add-response-header = ( "Content-Encoding" => "gzip")
- }
-
-
-TurboGears
-----------
-
-To compress dynamic content with TurboGears please enable ::
-
- [/]
- gzip_filter.on = True
- gzip_filter.mime_types = ["application/x-javascript", "text/javascript", "text/html", "text/css", "text/plain"]
-
-in the config/app.cfg file in your TurboGears application. The above lines should already be in the file. You just need to remove the comment symbol in front of the lines to make them active.
-
-Django
-------
-
-To compress dynamic content with Django please enable the GZipMiddleware ::
-
- MIDDLEWARE_CLASSES = (
- 'django.middleware.gzip.GZipMiddleware',
- ...
- )
-
-in the settings.py file in your Django project.
-
-Catalyst
---------
-
-To compress dynamic content with Perl/Catalyst, simply use the Catalyst::Plugin::Compress::Gzip module available on CPAN ::
-
- use Catalyst qw(
- Compress::Gzip
- ...
- );
-
-in your main package (MyApp.pm). Further configuration is not required.
-
-}}}
-
-
-
Modified: lighttpd/trunk/doc/config/Makefile.in
===================================================================
--- lighttpd/trunk/doc/config/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/config/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -115,6 +115,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -148,6 +149,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -191,6 +193,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -223,7 +226,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/doc/config/conf.d/Makefile.in
===================================================================
--- lighttpd/trunk/doc/config/conf.d/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/config/conf.d/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -75,6 +75,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -108,6 +109,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -151,6 +153,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -183,7 +186,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/doc/config/vhosts.d/Makefile.in
===================================================================
--- lighttpd/trunk/doc/config/vhosts.d/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/config/vhosts.d/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -75,6 +75,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -108,6 +109,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -151,6 +153,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -183,7 +186,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Deleted: lighttpd/trunk/doc/configuration.txt
===================================================================
--- lighttpd/trunk/doc/configuration.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/configuration.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,532 +0,0 @@
-==================
-Configuration File
-==================
-
-------------
-Module: core
-------------
-
-:Author: Jan Kneschke
-:Date: $Date$
-:Revision: $Revision$
-
-:abstract:
- the layout of the configuration file
-
-.. meta::
- :keywords: lighttpd, configuration
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Basic Syntax
-------------
-
-A BNF like notation: ::
-
- option : NAME = VALUE
- merge : NAME += VALUE
- NAME : modulename.key
- VALUE : ( <string> | <integer> | <boolean> | <array> | VALUE [ + VALUE ]*)
- <string> : "text"
- <integer>: digit*
- <boolean>: ( "enable" | "disable" )
- <array> : "(" [ <string> "=>" ] <value> [, [ <string> "=>" ] <value> ]* ")"
- INCLUDE : "include" VALUE
- INCLUDE_SHELL : "include_shell" STRING_VALUE
-
-Example
--------
-
-::
-
- # default document-root
- server.document-root = "/var/www/example.org/pages/"
-
- # TCP port
- server.port = 80
-
- # selecting modules
- server.modules = ( "mod_access", "mod_rewrite" )
-
- # variables, computed when config is read.
- var.mymodule = "foo"
- server.modules += ( "mod_" + var.mymodule )
- # var.PID is initialised to the pid of lighttpd before config is parsed
-
- # include, relative to dirname of main config file
- include "mime.types.conf"
-
- # read configuration from output of a command
- include_shell "/usr/local/bin/confmimetype /etc/mime.types"
-
-
-Conditional Configuration
-=========================
-
-Most options can be configured conditionally by using the following syntax
-(including nesting).
-
-::
-
- <field> <operator> <value> {
- ...
- <field> <operator> <value> {
- ... nesting: match only when parent match
- }
- }
- else <field> <operator> <value> {
- ... the "else if" block
- }
-
-where <field> is one of one of the following:
-
-$HTTP["cookie"]
- match on cookie
-$HTTP["scheme"]
- match on scheme
-$HTTP["host"]
- match on host
-$HTTP["useragent"]
-$HTTP["user-agent"]
- match on useragent
-$HTTP["referer"]
- match on referer
-$HTTP["method"]
- math on the http method
-$HTTP["url"]
- match on url
-$HTTP["query-string"]
- match on the (not decoded) query-string
-$HTTP["remoteip"]
-$HTTP["remote-ip"]
- match on the remote IP or a remote Network
-$HTTP["language"]
- match on the Accept-Language header
-$SERVER["socket"]
- match on socket. Value must be on the format "ip:port" where ip is an IP
- address and port a port number. Only equal match (==) is supported.
- It also binds the daemon to this socket. Use this if you want to do IP/port-
- based virtual hosts.
-
-<operator> is one of:
-
-==
- string equal match
-!=
- string not equal match
-=~
- perl style regular expression match
-!~
- perl style regular expression not match
-
-and <value> is either a quoted ("") literal string or regular expression.
-
-
-Example
--------
-
-::
-
- # disable directory-listings for /download/*
- dir-listing.activate = "enable"
- $HTTP["url"] =~ "^/download/" {
- dir-listing.activate = "disable"
- }
-
- # handish virtual hosting
- # map all domains of a top-level-domain to a single document-root
- $HTTP["host"] =~ "(^|\.)example\.org$" {
- server.document-root = "/var/www/htdocs/example.org/pages/"
- }
-
- # multiple sockets
- $SERVER["socket"] == "127.0.0.1:81" {
- server.document-root = "..."
- }
-
- $SERVER["socket"] == "127.0.0.1:443" {
- ssl.pemfile = "/var/www/certs/localhost.pem"
- ssl.engine = "enable"
-
- server.document-root = "/var/www/htdocs/secure.example.org/pages/"
- }
-
- # deny access for all googlebot
- $HTTP["useragent"] =~ "Google" {
- url.access-deny = ( "" )
- }
-
- # deny access for all image stealers
- $HTTP["referer"] !~ "^($|http://www\.example\.org)" {
- url.access-deny = ( ".jpg", ".jpeg", ".png" )
- }
-
- # deny the access to www.example.org to all user which
- # are not in the 10.0.0.0/8 network
- $HTTP["host"] == "www.example.org" {
- $HTTP["remoteip"] != "10.0.0.0/8" {
- url.access-deny = ( "" )
- }
- }
-
-Using variables
-===============
-
-You can set your own variables in the configuration to simplify your config.
-::
-
- var.basedir = "/home/www/servers/"
- $HTTP["host"] == "www.example.org" {
- server.name = "www.example.org"
- include "incl-base.conf"
- }
-
- in incl-base.conf:
- server.document-root = basedir + server.name + "/pages/"
- accesslog.filename = basedir + server.name + "/logs/access.log"
-
-You can also use environement variables or the default variables var.PID and
-var.CWD: ::
-
- var.basedir = env.LIGHTTPDBASE
-
- $HTTP["host"] == "www.example.org" {
- server.name = "www.example.org"
- include "incl-base.conf"
- include "incl-fastcgi.conf"
- }
-
- in incl-fastcgi.conf:
- fastcgi.server = ( ... => ((
- "socket" => basedir + server.name + "/tmp/fastcgi-" + PID + ".sock"
- )) )
-
-Or like the lighttpd script for rails does:
-
- var.basedir = var.CWD
-
- server.document-root = basedir + "/public/"
-
-Global context
-==============
-
-::
-
- global {
- ...
- }
-
-You don't need it in the main configuration file. But you might have
-difficulty setting server wide configuration inside a included-file from
-conditionals.
-
-Example
--------
-
-::
-
- in lighttpd.conf:
- server.modules = ()
- $HTTP["host"] == "www.example.org" {
- include "incl-php.conf"
- }
-
- in incl-php.conf:
- global {
- server.modules += ("mod_fastcgi")
- static-file.exclude-extensions += (".php")
- }
- fastcgi.server = "..."
-
-Options
-=======
-
-server module
--------------
-
-main sections
-`````````````
-
-server.document-root
- document-root of the webserver
-
- This variable has the specified as it will be used for all requests
- without a Host: header and for all with a know hostname which you
- might have specified with one of the above conditionals.
-
- Default: no default, required
-
-server.bind
- IP address, hostname or absolute path to the unix-domain socket the server
- listen on.
-
- Default: bind to all interfaces
-
- Example: ::
-
- server.bind = "127.0.0.1"
- server.bind = "www.example.org"
- server.bind = "/tmp/lighttpd.socket"
-
-server.port
- tcp-port to bind the server to
-
-.. note:: port belows 1024 require root-permissions
-
- Default: 80 (443 if ssl is enabled)
-
-server.use-ipv6
- bind to the IPv6 socket
-
-server.defer-accept
- set TCP_DEFER_ACCEPT to the specified value on the socket if the value is > 0
- and TCP_DEFER_ACCEPT is available on the platform (linux2.4+)
-
- default: 0
-
-server.tag
- set the string returned by the Server: response header
-
- Default: lighttpd <current-version>
-
-server.errorlog
- pathname of the error-log
-
- Default: either STDERR or ``server.errorlog-use-syslog``
-
-server.errorlog-use-syslog
- send errorlog to syslog
-
- Default: disabled
-
-server.chroot
- root-directory of the server
-
- NOTE: requires root-permissions
-
-server.username
- username used to run the server
-
- NOTE: requires root-permissions
-
-server.groupname
- groupname used to run the server
-
- NOTE: requires root-permissions
-
-server.follow-symlink
- allow to follow-symlinks
-
- Default: enabled
-
-index-file.names
- list of files to search for if a directory is requested
- e.g.: ::
-
- index-file.names = ( "index.php", "index.html",
- "index.htm", "default.htm" )
-
- if a name starts with slash this file will be used a index generator
- for all directories.
-
-server.modules
- modules to load
-
-.. note:: the order of the modules is important.
-
- The modules are executed in the order as they are specified. Loading
- mod_auth AFTER mod_fastcgi might disable authentication for fastcgi
- backends (if check-local is disabled).
-
- As auth should be done first, move it before all executing modules (like
- proxy, fastcgi, scgi and cgi).
-
- rewrites, redirects and access should be first, followed by auth and
- the docroot plugins.
-
- Afterwards the external handlers like fastcgi, cgi, scgi and proxy and
- at the bottom the post-processing plugins like mod_accesslog.
-
- e.g.: ::
-
- server.modules = ( "mod_rewrite",
- "mod_redirect",
- "mod_alias",
- "mod_access",
- "mod_auth",
- "mod_status",
- "mod_simple_vhost",
- "mod_evhost",
- "mod_userdir",
- "mod_secdownload",
- "mod_fastcgi",
- "mod_proxy",
- "mod_cgi",
- "mod_ssi",
- "mod_compress",
- "mod_usertrack",
- "mod_expire",
- "mod_rrdtool",
- "mod_accesslog" )
-
- Starting with lighttpd 1.4.0 three default modules are loaded automaticly:
-
- - mod_indexfile
- - mod_dirlisting
- - mod_staticfile
-
-server.event-handler
- set the event handler
-
- Default: "poll"
-
-server.pid-file
- set the name of the .pid-file where the PID of the server should be placed.
- This option is used in combination with a start-script and the daemon mode
-
- Default: not set
-
-server.max-request-size
- maximum size in kbytes of the request (header + body). Only applies to POST
- requests.
-
- Default: 2097152 (2GB)
-
-server.max-worker
- number of worker processes to spawn. This is usually only needed on servers
- which are fairly loaded and the network handler calls delay often (e.g. new
- requests are not handled instantaneously).
-
- Default: 0
-
-server.name
- name of the server/virtual server
-
- Default: hostname
-
-server.max-keep-alive-requests
- maximum number of request within a keep-alive session before the server
- terminates the connection
-
- Default: 128
-
-server.max-keep-alive-idle
- maximum number of seconds until a idling keep-alive connection is droped
-
- Default: 30
-
-server.max-read-idle
- maximum number of seconds until a waiting, non keep-alive read times out
- and closes the connection
-
- Default: 60
-
-server.max-write-idle
- maximum number of seconds until a waiting write call times out and closes
- the connection
-
- Default: 360
-
-server.error-handler-404
- uri to call if the requested file results in a 404
-
- Default: not set
-
- Example: ::
-
- server.error-handler-404 = "/error-404.php"
-
-server.protocol-http11
- defines if HTTP/1.1 is allowed or not.
-
- Default: enabled
-
-server.range-requests
- defines if range requests are allowed or not.
-
- Default: enabled
-
-
-SSL engine
-``````````
-
-ssl.pemfile
- path to the PEM file for SSL support
-
-debugging
-`````````
-
-debug.dump-unknown-headers
- enables listing of internally unhandled HTTP-headers
-
- e.g. ::
-
- debug.dump-unknown-headers = "enable"
-
-mimetypes
-`````````
-
-mimetype.assign
- list of known mimetype mappings
- NOTE: if no mapping is given "application/octet-stream" is used
-
- e.g.: ::
-
- mimetype.assign = ( ".png" => "image/png",
- ".jpg" => "image/jpeg",
- ".jpeg" => "image/jpeg",
- ".html" => "text/html",
- ".txt" => "text/plain" )
-
- The list is compared top down and the first match is taken. This is
- important if you have matches like: ::
-
- ".tar.gz" => "application/x-tgz",
- ".gz" => "application/x-gzip",
-
- If you want to set another default mimetype use: ::
-
- ...,
- "" => "text/plain" )
-
- as the last entry in the list.
-
-mimetype.use-xattr
- If available, use the XFS-style extended attribute interface to
- retrieve the "Content-Type" attribute on each file, and use that as the
- mime type. If it's not defined or not available, fall back to the
- mimetype.assign assignment.
-
- e.g.: ::
-
- mimetype.use-xattr = "enable"
-
- on shell use:
-
- $ attr -s Content-Type -V image/svg svgfile.svg
-
- or
-
- $ attr -s Content-Type -V text/html indexfile
-
-
-debugging
-`````````
-
-debug.log-request-header
- default: disabled
-
-debug.log-response-header
- default: disabled
-
-debug.log-file-not-found
- default: disabled
-
-debug.log-request-handling
- default: disabled
-
-debug.log-ssl-noise
- default: disabled
Deleted: lighttpd/trunk/doc/dirlisting.txt
===================================================================
--- lighttpd/trunk/doc/dirlisting.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/dirlisting.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,126 +0,0 @@
-==================
-Directory Listings
-==================
-
-----------------------
-Module: mod_dirlisting
-----------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- mod_dirlisting generates HTML based directory listings with full CSS
- control
-
-.. meta::
- :keywords: lighttpd, directory listings, dirlisting
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-mod_dirlisting is one of the modules which is loaded by default and don't have to
-be specified on server.modules to work.
-
-A directory listing is generated if a directory is requested and no index-file
-was found in that directory.
-
-To enable directory listings globally: ::
-
- dir-listing.activate = "enable"
-
-If you need it only for a directory, use conditionals: ::
-
- $HTTP["url"] =~ "^/download($|/)" {
- dir-listing.activate = "enable"
- }
-
-You can also use a external generator for directory listings if you use
-mod_indexfile. ::
-
- index-file.names = ( "/dir-generator.php" )
-
-If a directory is requested the dir-generator.php is called instead which can
-take the REQUEST_URI to see which directory was requested.
-
-For large folders this is highly recommend.
-
-Options
-=======
-
-dir-listing.activate
- enables virtual directory listings if a directory is requested no
- index-file was found
-
- Default: disabled
-
-dir-listing.hide-dotfiles
- if enabled, does not list hidden files in directory listings generated
- by the dir-listing option.
-
- Default: enabled
-
-dir-listing.external-css
- path to an external css stylesheet for the directory listing
-
-dir-listing.exclude
- list of regular expressions. Files that match any of the specified regular
- expressions will be excluded from directory listings.
-
-dir-listing.encoding
- set a encoding for the generated directory listing
-
- If you file-system is not using ASCII you have to set the encoding of
- the filenames as they are put into the HTML listing AS IS (with XML
- encoding)
-
- Example: ::
-
- dir-listing.encoding = "utf-8"
-
-dir-listing.show-readme
- shows README.txt after the dirlisting if it exists in the directory
-
- Default: disabled
-
-dir-listing.hide-readme-file
- hides README.txt in the dirlisting
-
- Default: disabled
-
-dir-listing.show-header
- shows HEADER.txt before the dirlisting if it exists in the directory
-
- Default: disabled
-
-dir-listing.hide-header-file
- hides HEADER.txt in the dirlisting
-
- Default: disabled
-
-dir-listing.set-footer
-
- Default: empty, uses server.tag instead
-
-dir-listing.encode-readme
- encodes all control characers, '&', '<', '>' and '\x7f' as &#x**;
-
- Default: enabled
-
-dir-listing.encode-header
- encodes all control characers, '&', '<', '>' and '\x7f' as &#x**;
-
- Default: enabled
-
-dir-listing.auto-layout
- Disable this if you want your own html header and footer; specify
- them in HEADER.txt and README.txt
-
- you have to enable dir-list.show-readme/header for this of course
-
- .external-css and .set-footer will be ignored if this is disabled
-
- Default: enabled
Deleted: lighttpd/trunk/doc/evhost.txt
===================================================================
--- lighttpd/trunk/doc/evhost.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/evhost.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,46 +0,0 @@
-========================
-Enhanced Virtual-Hosting
-========================
-
-------------------
-Module: mod_evhost
-------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:43:49 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- virtual hosting
-
-.. meta::
- :keywords: lighttpd, virtual hosting
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-mod_evhost builds the document-root based on a pattern which contains
-wildcards. Those wildcards can represent parts if the submitted hostname
-
-
-::
-
- %% => % sign
- %0 => domain name + tld
- %1 => tld
- %2 => domain name without tld
- %3 => subdomain 1 name
- %4 => subdomain 2 name
- %_ => the complete hostname (without port info)
-
- evhost.path-pattern = "/home/www/servers/%3/pages/"
-
-Options
-=======
-
-evhost.path-pattern
- pattern with wildcards to be replace to build a documentroot
-
-
Deleted: lighttpd/trunk/doc/expire.txt
===================================================================
--- lighttpd/trunk/doc/expire.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/expire.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,42 +0,0 @@
-===============================================
-Controlling the Expiration of Content in Caches
-===============================================
-
-------------------
-Module: mod_expire
-------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- mod_expire controls the setting of the the Expire Response header
-
-.. meta::
- :keywords: lighttpd, expire
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-mod_expire controls the Expire header in the Response Header of HTTP/1.0
-messages. It is usefull to set it for static files which should be cached
-aggressivly like images, stylesheets or similar.
-
-Options
-=======
-
-expire.url
- assignes a expiration to all files below the specified path. The
- specification of the time is made up of: ::
-
- <access|modification> <number> <years|months|days|hours|minutes|seconds>
-
- following the syntax used by mod_expire in Apache 1.3.x and later.
-
- Example: ::
-
- expire.url = ( "/images/" => "access 1 hour" )
-
Deleted: lighttpd/trunk/doc/extforward.txt
===================================================================
--- lighttpd/trunk/doc/extforward.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/extforward.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,105 +0,0 @@
-==============
-mod_extforward
-==============
-
-.. contents::
-
-Overview
-========
-
-Comman Kang <comman.kang at gmail.com> sent me: ::
-
- Hello jan.
-
- I've made something rough but similar to mod_extract_forwarded for
- Apache. This module will extract the client's "real" ip from
- X-Forwarded-For header which is added by squid or other proxies. It might be
- useful for servers behind reverse proxy servers.
-
- However, this module is causing segfault with mod_ssl or
- $HTTP{''socket"} directive, crashing in config_check_cond while patching
- connection , I do not understand architecture of the lighttpd well, does it
- need to call patch_connection in either handle_request_done and
- connection_reset ?
-
-Lionel Elie Mamane <lionel at mamane.lu> improved the patch: ::
-
- I've taken lighttpd-1.4.10-mod_extforward.c from the wiki and I've
- extended it. Here is the result.
-
- Major changes:
-
- - IPv6 support
-
- - Fixed at least one segfault with SERVER['socket']
-
- - Arrange things so that a url.access-deny under scope of a
- HTTP['remoteip'] condition works well :)
-
- I've commented the code in some places, mostly where I wasn't sure
- what was going on, or I didn't see what the original author meant to
- do.
-
-Options
-=======
-
-extforward.forwarder
- Sets trust level of proxy IP's.
-
- Default: empty
-
- Example: ::
-
- extforward.forwarder = ("10.0.0.232" => "trust")
-
- will translate ip addresses coming from 10.0.0.232 to real ip addresses extracted from "X-Forwarded-For" or "Forwarded-For" HTTP request header.
-
-extforward.headers
- Sets headers to search for finding the originl addresses.
-
- Example (for use with a Zeus ZXTM loadbalancer): ::
-
- extforward.headers = ("X-Cluster-Client-Ip")
-
- Default: empty, results in searching for "X-Forwarded-For" and "Forwarded-For"
-
-Note
-=======
-
-The effect of this module is variable on $HTTP["remotip"] directives and other module's remote ip dependent actions.
-Things done by modules before we change the remoteip or after we reset it will match on the proxy's IP.
-Things done in between these two moments will match on the real client's IP.
-The moment things are done by a module depends on in which hook it does things and within the same hook
-on whether they are before/after us in the module loading order
-(order in the server.modules directive in the config file).
-
-Tested behaviours:
-
- mod_access: Will match on the real client.
-
- mod_accesslog:
- In order to see the "real" ip address in access log ,
- you'll have to load mod_extforward after mod_accesslog.
- like this: ::
-
- server.modules = (
- .....
- mod_accesslog,
- mod_extforward
- )
-
-Samples
-=======
-
-Trust proxy 10.0.0.232 and 10.0.0.232 ::
-
- extforward.forwarder = (
- "10.0.0.232" => "trust",
- "10.0.0.233" => "trust",
- )
-
-Trust all proxies (NOT RECOMMENDED!) ::
-
- extforward.forwarder = ( "all" => "trust")
-
-Note that "all" has precedence over specific entries, so "all except" setups will not work.
Deleted: lighttpd/trunk/doc/fastcgi-state.dot
===================================================================
--- lighttpd/trunk/doc/fastcgi-state.dot 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/fastcgi-state.dot 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,6 +0,0 @@
-digraph fcgistate {
- init -> connect -> prepwrite -> write -> read -> close
- write -> write
- read -> read
- connect -> connect
-}
Deleted: lighttpd/trunk/doc/fastcgi-state.txt
===================================================================
--- lighttpd/trunk/doc/fastcgi-state.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/fastcgi-state.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,51 +0,0 @@
-=================
-FastCGI Internals
-=================
-
----------------
-Module: fastcgi
----------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/01 07:01:29 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- This is a short summary of the state-engine which is driving the FastCGI
- module. It describes the basic concepts and the way the different parts
- of the module are connected.
-
-.. meta::
- :keywords: lighttpd, state-engine, fastcgi
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-States
-------
-
-The state-engine is currently made of 6 states which are walk-through on
-the way each connection.
-
-:init:
- prepare fastcgi-connection
-:connect:
- waiting for a connection
-:prepwrite:
- build the fastcgi-request
-:write:
- write the fastcgi-request to the network
-:read:
- read fastcgi-response from network and push it to the write-queue
-:close:
- terminate the connection
-
-.. image:: fastcgi-state.png
-
-Delays
-------
-
-connect, write and read may need to wait for an fdevent. That's the reason
-for the loop in the state-diagram.
Deleted: lighttpd/trunk/doc/fastcgi.txt
===================================================================
--- lighttpd/trunk/doc/fastcgi.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/fastcgi.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,601 +0,0 @@
-=====================
-the FastCGI Interface
-=====================
-
--------------------
-Module: mod_fastcgi
--------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.3 $
-
-:abstract:
- The FastCGI interface is the fastest and most secure way
- to interface external process-handlers like Perl, PHP and
- your self-written applications.
-
-.. meta::
- :keywords: lighttpd, FastCGI
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-lighttpd provides an interface to a external programs that
-support the FastCGI interface. The FastCGI Interface is
-defined by http://www.fastcgi.com/ and is a
-platform-independent and server independent interface between
-a web-application and a webserver.
-
-This means that FastCGI programs that run with the Apache
-Webserver will run seamlessly with lighttpd and vice versa.
-
-
-FastCGI
--------
-
-FastCGI is removes a lot of the limitations of CGI programs.
-CGI programs have the problem that they have to be restarted
-by the webserver for every request which leads to really bad
-performance values.
-
-FastCGI removes this limitation by keeping the process running
-and handling the requests by this always running process. This
-removes the time used for the fork() and the overall startup
-and cleanup time which is necessary to create and destroy a
-process.
-
-While CGI programs communicate to the server over pipes,
-FastCGI processes use Unix-Domain-Sockets or TCP/IP to talk
-with the webserver. This gives you the second advantage over
-simple CGI programs: FastCGI don't have to run on the Webserver
-itself but everywhere in the network.
-
-lighttpd takes it a little bit further by providing a internal
-FastCGI load-balancer which can be used to balance the load
-over multiple FastCGI Servers. In contrast to other solutions
-only the FastCGI process has to be on the cluster and not the
-whole webserver. That gives the FastCGI process more resources
-than a e.g. load-balancer+apache+mod_php solution.
-
-If you compare FastCGI against a apache+mod_php solution you
-should note that FastCGI provides additional security as the
-FastCGI process can be run under different permissions that
-the webserver and can also live a chroot which might be
-different than the one the webserver is running in.
-
-Options
-=======
-
-lighttpd provides the FastCGI support via the fastcgi-module
-(mod_fastcgi) which provides 2 options in the config-file:
-
-fastcgi.debug
- a value between 0 and 65535 to set the debug-level in the
- FastCGI module. Currently only 0 and 1 are used. Use 1 to
- enable some debug output, 0 to disable it.
-
-fastcgi.map-extensions
- map multiple extensions to the same fastcgi server
-
- Example: ::
-
- fastcgi.map-extensions = ( ".php3" => ".php" )
-
-fastcgi.server
- tell the module where to send FastCGI requests to. Every
- file-extension can have it own handler. Load-Balancing is
- done by specifying multiple handles for the same extension.
-
- structure of fastcgi.server section: ::
-
- ( <extension> =>
- (
- ( "host" => <string> ,
- "port" => <integer> ,
- "socket" => <string>, # either socket
- # or host+port
- "bin-path" => <string>, # OPTIONAL
- "bin-environment" => <array>, # OPTIONAL
- "bin-copy-environment" => <array>, # OPTIONAL
- "mode" => <string>, # OPTIONAL
- "docroot" => <string> , # OPTIONAL if "mode"
- # is not "authorizer"
- "check-local" => <string>, # OPTIONAL
- "max-procs" => <integer>, # OPTIONAL
- "broken-scriptfilename" => <boolean>, # OPTIONAL
- "disable-time" => <integer>, # optional
- "allow-x-send-file" => <boolean>, # optional
- "kill-signal" => <integer>, # OPTIONAL
- "fix-root-scriptname" => <boolean>,
- # OPTIONAL
- ( "host" => ...
- )
- )
- )
-
- :<extension>: is the file-extension or prefix
- (if started with "/")
- :"host": is hostname/ip of the FastCGI process
- :"port": is tcp-port on the "host" used by the FastCGI
- process
- :"bin-path": path to the local FastCGI binary which should be
- started if no local FastCGI is running
- :"socket": path to the unix-domain socket
- :"mode": is the FastCGI protocol mode.
- Default is "responder", also "authorizer"
- mode is implemented.
- :"docroot": is optional and is the docroot on the remote
- host for default "responder" mode. For
- "authorizer" mode it is MANDATORY and it points
- to docroot for authorized requests. For security
- reasons it is recommended to keep this docroot
- outside of server.document-root tree.
- :"check-local": is optional and may be "enable" (default) or
- "disable". If enabled the server first check
- for a file in local server.document-root tree
- and return 404 (Not Found) if no such file.
- If disabled, the server forward request to
- FastCGI interface without this check.
- :"broken-scriptfilename": breaks SCRIPT_FILENAME in a wat that
- PHP can extract PATH_INFO from it (default: disabled)
- :"disable-time": time to wait before a disabled backend is checked
- again
- :"allow-x-send-file": controls if X-LIGHTTPD-send-file headers
- are allowed
- :"fix-root-scriptname": fix broken path-info split for "/" extension ("prefix")
-
- If bin-path is set:
-
- :"max-procs": the upper limit of the processess to start
- :"bin-environment": put an entry into the environment of
- the started process
- :"bin-copy-environement": clean up the environment and copy
- only the specified entries into the fresh
- environment of the spawn process
- :"kill-signal": signal to terminate the FastCGI process with,
- defauls to SIGTERM
-
-Examples
---------
-
- Multiple extensions for the same host ::
-
- fastcgi.server = ( ".php" =>
- (( "host" => "127.0.0.1",
- "port" => 1026,
- "bin-path" => "/usr/local/bin/php"
- )),
- ".php4" =>
- (( "host" => "127.0.0.1",
- "port" => 1026
- ))
- )
-
- Example with prefix: ::
-
- fastcgi.server = ( "/remote_scripts/" =>
- (( "host" => "192.168.0.3",
- "port" => 9000,
- "check-local" => "disable",
- "docroot" => "/" # remote server may use
- # it's own docroot
- ))
- )
-
- The request `http://my.host.com/remote_scripts/test.cgi` will
- be forwarded to fastcgi server at 192.168.0.3 and the value
- "/remote_scripts/test.cgi" will be used for the SCRIPT_NAME
- variable. Remote server may prepend it with its own
- document root. The handling of index files is also the
- resposibility of remote server for this case.
-
- In the case that the prefix is not terminated with a slash
- the prefix will be handled as file and /test.cgi would become
- a PATH_INFO instead of part of SCRIPT_NAME.
-
-
- Example for "authorizer" mode: ::
-
- fastcgi.server = ( "/remote_scripts/" =>
- (( "host" => "10.0.0.2",
- "port" => 9000,
- "docroot" => "/path_to_private_docs",
- "mode" => "authorizer"
- ))
- )
-
- Note that if "docroot" is specified then its value will be
- used in DOCUMENT_ROOT and SCRIPT_FILENAME variables passed
- to FastCGI server.
-
-Load-Balancing
-==============
-
-The FastCGI plugin provides automaticly a load-balancing between
-multiple FastCGI servers. ::
-
- fastcgi.server = ( ".php" =>
- (( "host" => "10.0.0.2", "port" => 1030 ),
- ( "host" => "10.0.0.3", "port" => 1030 ))
- )
-
-
-To understand how the load-balancing works you can enable the
-fastcgi.debug option and will get a similar output as here: ::
-
- proc: 127.0.0.1 1031 1 1 1 31454
- proc: 127.0.0.1 1028 1 1 1 31442
- proc: 127.0.0.1 1030 1 1 1 31449
- proc: 127.0.0.1 1029 1 1 2 31447
- proc: 127.0.0.1 1026 1 1 2 31438
- got proc: 34 31454
- release proc: 40 31438
- proc: 127.0.0.1 1026 1 1 1 31438
- proc: 127.0.0.1 1028 1 1 1 31442
- proc: 127.0.0.1 1030 1 1 1 31449
- proc: 127.0.0.1 1031 1 1 2 31454
- proc: 127.0.0.1 1029 1 1 2 31447
-
-Even if this for multiple FastCGI children on the local machine
-the following explaination is valid for remote connections too.
-
-The output shows:
-
-- IP, port, unix-socket (is empty here)
-- is-local, state (0 - unset, 1 - running, ... )
-- active connections (load)
-- PID
-
-As you can see the list is always sorted by the load field.
-
-Whenever a new connection is requested, the first entry (the one
-with the lowest load) is selected, the load is increased (got proc: ...)
-and the list is sorted again.
-
-If a FastCGI request is done or the connection is dropped, the load on the
-FastCGI proc decreases and the list is sorted again (release proc: ...)
-
-This behaviour is very light-weight in code and still very efficient
-as it keeps the fastcgi-servers equally loaded even if they have different
-CPUs.
-
-Adaptive Process Spawning
-=========================
-
-.. note:: This feature is disabled in 1.3.14 again. min-procs is
- ignored in that release
-
-Starting with 1.3.8 lighttpd can spawn processes on demand if
-a bin-path is specified and the FastCGI process runs locally.
-
-If you want to have a least one FastCGI process running and
-more of the number of requests increases you can use min-procs
-and max-procs.
-
-A new process is spawned as soon as the average number of
-requests waiting to be handle by a single process increases the
-max-load-per-proc setting.
-
-The idle-timeout specifies how long a fastcgi-process should wait
-for a new request before it kills itself.
-
-Example
--------
-::
-
- fastcgi.server = ( ".php" =>
- (( "socket" => "/tmp/php.socket",
- "bin-path" => "/usr/local/bin/php",
- "min-procs" => 1,
- "max-procs" => 32,
- "max-load-per-proc" => 4,
- "idle-timeout" => 20
- ))
- )
-
-Disabling Adaptive Spawning
----------------------------
-
-Adaptive Spawning is a quite new feature and it might misbehave
-for your setup. There are several ways to control how the spawing
-is done:
-
-1. ``"max-load-per-proc" => 1``
- if that works for you, great.
-
-2. If not set ``min-procs == max-procs``.
-
-3. For PHP you can also use: ::
-
- $ PHP_FCGI_CHILDREN=384 ./lighttpd -f ./lighttpd.conf
-
- fastcgi.server = ( ".php" =>
- (( "socket" => "/tmp/php.socket",
- "bin-path" => "/usr/local/bin/php",
- "min-procs" => 1,
- "max-procs" => 1,
- "max-load-per-proc" => 4,
- "idle-timeout" => 20
- ))
- )
-
- It will create one socket and let's PHP create the 384 processes itself.
-
-4. If you don't want lighttpd to manage the fastcgi processes, remove the
- bin-path and use spawn-fcgi to spawn them itself.
-
-
-FastCGI and Programming Languages
-=================================
-
-Preparing PHP as a FastCGI program
-----------------------------------
-
-One of the most important application that has a FastCGI
-interface is php which can be downloaded from
-http://www.php.net/ . You have to recompile the php from
-source to enable the FastCGI interface as it is normally
-not enabled by default in the distributions.
-
-If you already have a working installation of PHP on a
-webserver execute a small script which just contains ::
-
- <?php phpinfo(); ?>
-
-and search for the line in that contains the configure call.
-You can use it as the base for the compilation.
-
-You have to remove all occurences of `--with-apxs`, `--with-apxs2`
-and the like which would build PHP with Apache support. Add the
-next three switches to compile PHP with FastCGI support::
-
- $ ./configure \
- --enable-fastcgi \
- --enable-force-cgi-redirect \
- ...
-
-After compilation and installation check that your PHP
-binary contains FastCGI support by calling: ::
-
- $ php -v
- PHP 4.3.3RC2-dev (cgi-fcgi) (built: Oct 19 2003 23:19:17)
-
-The important part is the (cgi-fcgi).
-
-
-Starting a FastCGI-PHP
-----------------------
-
-Starting with version 1.3.6 lighttpd can spawn the FastCGI
-processes locally itself if necessary: ::
-
- fastcgi.server = ( ".php" =>
- (( "socket" => "/tmp/php-fastcgi.socket",
- "bin-path" => "/usr/local/bin/php"
- ))
- )
-
-PHP provides 2 special environment variables which control the number of
-spawned workes under the control of a single watching process
-(PHP_FCGI_CHILDREN) and the number of requests what a single worker
-handles before it kills itself. ::
-
- fastcgi.server = ( ".php" =>
- (( "socket" => "/tmp/php-fastcgi.socket",
- "bin-path" => "/usr/local/bin/php",
- "bin-environment" => (
- "PHP_FCGI_CHILDREN" => "16",
- "PHP_FCGI_MAX_REQUESTS" => "10000"
- )
- ))
- )
-
-To increase the security of the started process you should only pass
-the necessary environment variables to the FastCGI process. ::
-
- fastcgi.server = ( ".php" =>
- (( "socket" => "/tmp/php-fastcgi.socket",
- "bin-path" => "/usr/local/bin/php",
- "bin-environment" => (
- "PHP_FCGI_CHILDREN" => "16",
- "PHP_FCGI_MAX_REQUESTS" => "10000" ),
- "bin-copy-environment" => (
- "PATH", "SHELL", "USER" )
- ))
- )
-
-Configuring PHP
----------------
-
-If you want to use PATH_INFO and PHP_SELF in you PHP scripts you have to
-configure php and lighttpd. The php.ini needs the option: ::
-
- cgi.fix_pathinfo = 1
-
-and the option ``broken-scriptfilename`` in your fastcgi.server config: ::
-
- fastcgi.server = ( ".php" =>
- (( "socket" => "/tmp/php-fastcgi.socket",
- "bin-path" => "/usr/local/bin/php",
- "bin-environment" => (
- "PHP_FCGI_CHILDREN" => "16",
- "PHP_FCGI_MAX_REQUESTS" => "10000" ),
- "bin-copy-environment" => (
- "PATH", "SHELL", "USER" ),
- "broken-scriptfilename" => "enable"
- ))
- )
-
-Why this ? the ``cgi.fix_pathinfo = 0`` would give you a working ``PATH_INFO``
-but no ``PHP_SELF``. If you enable it, it turns around. To fix the
-``PATH_INFO`` `--enable-discard-path` needs a SCRIPT_FILENAME which is against the CGI spec, a
-broken-scriptfilename. With ``cgi.fix_pathinfo = 1`` in php.ini and
-``broken-scriptfilename => "enable"`` you get both.
-
-
-External Spawning
------------------
-
-Spawning FastCGI processes directly in the webserver has some
-disadvantages like
-
-- FastCGI process can only run locally
-- has the same permissions as the webserver
-- has the same base-dir as the webserver
-
-As soon as you are using a seperate FastCGI Server to
-take off some load from the webserver you have to control
-the FastCGI process by a external program like spawn-fcgi.
-
-spawn-fcgi is used to start a FastCGI process in its own
-environment and set the user-id, group-id and change to
-another root-directory (chroot).
-
-For convenience a wrapper script should be used which takes
-care of all the necessary option. Such a script in included
-in the lighttpd distribution and is call spawn-php.sh.
-
-The script has a set of config variables you should take
-a look at: ::
-
- ## ABSOLUTE path to the spawn-fcgi binary
- SPAWNFCGI="/usr/local/sbin/spawn-fcgi"
-
- ## ABSOLUTE path to the PHP binary
- FCGIPROGRAM="/usr/local/bin/php"
-
- ## bind to tcp-port on localhost
- FCGIPORT="1026"
-
- ## bind to unix domain socket
- # FCGISOCKET="/tmp/php.sock"
-
- ## number of PHP childs to spawn
- PHP_FCGI_CHILDREN=10
-
- ## number of request server by a single php-process until
- ## is will be restarted
- PHP_FCGI_MAX_REQUESTS=1000
-
- ## IP adresses where PHP should access server connections
- ## from
- FCGI_WEB_SERVER_ADDRS="127.0.0.1,192.168.0.1"
-
- # allowed environment variables sperated by spaces
- ALLOWED_ENV="ORACLE_HOME PATH USER"
-
- ## if this script is run as root switch to the following user
- USERID=wwwrun
- GROUPID=wwwrun
-
-If you have set the variables to values that fit to your
-setup you can start it by calling: ::
-
- $ spawn-php.sh
- spawn-fcgi.c.136: child spawned successfully: PID: 6925
-
-If you get "child spawned successfully: PID:" the php
-processes could be started successfully. You should see them
-in your processlist: ::
-
- $ ps ax | grep php
- 6925 ? S 0:00 /usr/local/bin/php
- 6928 ? S 0:00 /usr/local/bin/php
- ...
-
-The number of processes should be PHP_FCGI_CHILDREN + 1.
-Here the process 6925 is the master of the slaves which
-handle the work in parallel. Number of parallel workers can
-be set by PHP_FCGI_CHILDREN. A worker dies automaticly of
-handling PHP_FCGI_MAX_REQUESTS requests as PHP might have
-memory leaks.
-
-If you start the script as user root php processes will be
-running as the user USERID and group GROUPID to drop the
-root permissions. Otherwise the php processes will run as
-the user you started script as.
-
-As the script might be started from a unknown stage or even
-directly from the command-line it cleans the environment
-before starting the processes. ALLOWED_ENV contains all
-the external environement variables that should be available
-to the php-process.
-
-
-Perl
-----
-
-For Perl you have to install the FCGI module from CPAN.
-
-Skeleton for remote authorizer
-==============================
-
-The basic functionality of authorizer is as follows (see
-http://www.fastcgi.com/devkit/doc/fcgi-spec.html, 6.3 for
-details). ::
-
- #include <fcgi_stdio.h>
- #include <stdlib.h>
- #include <unistd.h>
- int main () {
- char* p;
-
- while (FCGI_Accept() >= 0) {
- /* wait for fastcgi authorizer request */
-
- printf("Content-type: text/html\r\n");
-
- if ((p = getenv("QUERY_STRING")) == NULL) ||
- <QUERY_STRING is unauthorized>)
- printf("Status: 403 Forbidden\r\n\r\n");
-
- else printf("\r\n");
- /* default Status is 200 - allow access */
- }
-
- return 0;
- }
-
-It is possible to use any other variables provided by
-FastCGI interface for authorization check. Here is only an
-example.
-
-
-Troubleshooting
-===============
-
-fastcgi.debug should be enabled for troubleshooting.
-
-If you get: ::
-
- (fcgi.c.274) connect delayed: 8
- (fcgi.c.289) connect succeeded: 8
- (fcgi.c.745) unexpected end-of-file (perhaps the fastcgi
- process died): 8
-
-the fastcgi process accepted the connection but closed it
-right away. This happens if FCGI_WEB_SERVER_ADDRS doesn't
-include the host where you are connection from.
-
-If you get ::
-
- (fcgi.c.274) connect delayed: 7
- (fcgi.c.1107) error: unexpected close of fastcgi connection
- for /peterp/seite1.php (no fastcgi process on host/port ?)
- (fcgi.c.1015) emergency exit: fastcgi: connection-fd: 5
- fcgi-fd: 7
-
-the fastcgi process is not running on the host/port you are
-connection to. Check your configuration.
-
-If you get ::
-
- (fcgi.c.274) connect delayed: 7
- (fcgi.c.289) connect succeeded: 7
-
-everything is fine. The connect() call just was delayed a
-little bit and is completly normal.
-
Deleted: lighttpd/trunk/doc/features.txt
===================================================================
--- lighttpd/trunk/doc/features.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/features.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,116 +0,0 @@
-===============
-progress report
-===============
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- This document tries to track the requested features and
- the release when they have been implemented.
-
-.. meta::
- :keywords: lighttpd, features
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-The document was inspired by a mail from David Phillips:
-
-http://marc.theaimsgroup.com/?l=thttpd&m=108051453226692&w=2
-
-It is used to see what is still missing and what is already done. ::
-
- zell at zell.best.vwh.net writes:
- > Now that the author has made the source code available, I am
- > considering installing and testing the latest version. From a
- > quick glance, it seems to support most/all of the features of
- > Premium thttpd and Zeus.
-
- If you think it compares to Zeus, then you've obviously never used Zeus.
-
- lighttpd is currently the only non-blocking open source web server to
- support FastCGI responders and that's worthwhile.
-
- The documentation is lacking. Comments in the configuration file do not
- make up for a complete manual.
-
-Constantly improving. ::
-
- The configuration syntax is overly complex, like Apache. There is no .htaccess
- support.
-
-.htaccess support is not planed yet. ::
-
- There is only one server. You cannot have a separate configuration for each
- virtual server. This would seem to be especially problematic when doing
- SSL.
-
-Works since 1.3.0. ::
-
- There is no SSI support. Zeus has full recursive SSI support. Output from
- a FastCGI program can get run through the SSI interpreter. SSI can also do
- virtual includes recursively.
-
-SSI works since 1.2.4. ::
-
- Request logging is not configurable. Zeus supports fully configurable
- access logging, plus a binary version of CLF that save space.
-
-1.2.6 adds Apache-like logfile config. ::
-
- Access control only allows authentication via username and password. There
- is no way to allow or deny based in IP address.
-
-planed for 1.3.x ::
-
- The request rewriting appears to only allow regex substitutions. Zeus has a
- simple, yet powerful, request rewrite language.
-
-
-
- There is no support for FastCGI authorizers. These are very useful for high
- traffic sites that require complex authentication schemes or that store
- authorization information in a central database.
-
-since 1.1.9. ::
-
- There is no bandwidth throttling support. Zeus does bandwidth throttling
- correctly (i.e. unlike past versions of thttpd) and can throttle on a
- per-subserver (thttpd-style virtual hosts) basis.
-
-since 1.3.8. ::
-
- There is no ISAPI support. ISAPI is an elegant, open API that allows
- modification of web server behavior. While it isn't strictly necessary for
- an open source web server, it nice to have a documented, consistent API,
- rather than having to manually patch the server.
-
-If someone requests it it might be implemented. ::
-
- There is no web based interface. Zeus has a complete web based interface
- for everything, including a powerful feature of configuring multiple virtual
- servers at once.
-
-That is something that should be a special feature of Zeus. :) ::
-
- There is no support for mapping certain URLs to specific filesystem paths.
-
-since 1.2.6 ::
-
- There is no referring checking. This is incredibly important to prevent
- hotlinking of bandwidth intensive media types (images, movies, etc.).
-
-we have something better: mod_secdownload. And if someone wants referer
-checking we have a condition in the config for it since 1.2.9 ::
-
- Zeus has a lot of features that lighttpd doesn't have, but I only mentioned
- the ones I care about and use.
-
- --
- David Phillips <david at acz.org>
- http://david.acz.org/
-
Modified: lighttpd/trunk/doc/initscripts/Makefile.in
===================================================================
--- lighttpd/trunk/doc/initscripts/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/initscripts/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -75,6 +75,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -108,6 +109,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -151,6 +153,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -183,7 +186,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Deleted: lighttpd/trunk/doc/magnet.txt
===================================================================
--- lighttpd/trunk/doc/magnet.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/magnet.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,429 +0,0 @@
-{{{
-#!rst
-==============
-a power-magnet
-==============
-
-------------------
-Module: mod_magnet
-------------------
-
-
-
-.. contents:: Table of Contents
-
-Requirements
-============
-
-:Version: lighttpd 1.4.12 or higher
-:Packages: lua >= 5.1
-
-Overview
-========
-
-mod_magnet is a module to control the request handling in lighty.
-
-.. note::
-
- Keep in mind that the magnet is executed in the core of lighty. EVERY long-running operation is blocking
- ALL connections in the server. You are warned. For time-consuming or blocking scripts use mod_fastcgi and friends.
-
-For performance reasons mod_magnet caches the compiled script. For each script-run the script itself is checked for
-freshness and recompile if neccesary.
-
-
-Installation
-============
-
-mod_magnet needs a lighty which is compiled with the lua-support ( --with-lua). Lua 5.1 or higher are required by
-the module. Use "--with-lua=lua5.1" to install on Debian and friends. ::
-
- server.modules = ( ..., "mod_magnet", ... )
-
-Options
-=======
-
-mod_magnet can attract a request in several stages in the request-handling.
-
-* either at the same level as mod_rewrite, before any parsing of the URL is done
-* or at a later stage, when the doc-root is known and the physical-path is already setup
-
-It depends on the purpose of the script which stage you want to intercept. Usually you want to use
-the 2nd stage where the physical-path which relates to your request is known. At this level you
-can run checks against lighty.env["physical.path"].
-
-::
-
- magnet.attract-raw-url-to = ( ... )
- magnet.attract-physical-path-to = ( ... )
-
-You can define multiple scripts when separated by a semicolon. The scripts are executed in the specified
-order. If one of them a returning a status-code, the following scripts will not be executed.
-
-Tables
-======
-
-Most of the interaction between between mod_magnet and lighty is done through tables. Tables in lua are hashes (Perl), dictionaries (Java), arrays (PHP), ...
-
-Request-Environment
--------------------
-
-Lighttpd has its internal variables which are exported as read/write to the magnet.
-
-If "http://example.org/search.php?q=lighty" is requested this results in a request like ::
-
- GET /search.php?q=lighty HTTP/1.1
- Host: example.org
-
-When you are using ``attract-raw-url-to`` you can access the following variables:
-
-* parts of the request-line
-
- * lighty.env["request.uri"] = "/search.php?q=lighty"
-
-* HTTP request-headers
-
- * lighty.request["Host"] = "example.org"
-
-Later in the request-handling, the URL is splitted, cleaned up and turned into a physical path name:
-
-* parts of the URI
-
- * lighty.env["uri.path"] = "/search.php"
- * lighty.env["uri.path-raw"] = "/search.php"
- * lighty.env["uri.scheme"] = "http"
- * lighty.env["uri.authority"] = "example.org"
- * lighty.env["uri.query"] = "q=lighty"
-
-* filenames, pathnames
-
- * lighty.env["physical.path"] = "/my-docroot/search.php"
- * lighty.env["physical.rel-path"] = "/search.php"
- * lighty.env["physical.doc-root"] = "/my-docroot"
-
-All of them are readable, not all of the are writable (or don't have an effect if you write to them).
-
-As a start, you might want to use those variables for writing: ::
-
- -- 1. simple rewriting is done via the request.uri
- lighty.env["request.uri"] = ...
- return lighty.RESTART_REQUEST
-
- -- 2. changing the physical-path
- lighty.env["physical.path"] = ...
-
- -- 3. changing the query-string
- lighty.env["uri.query"] = ...
-
-Response Headers
-----------------
-
-If you want to set a response header for your request, you can add a field to the lighty.header[] table: ::
-
- lighty.header["Content-Type"] = "text/html"
-
-Sending Content
-===============
-
-You can generate your own content and send it out to the clients. ::
-
- lighty.content = { "<pre>", { filename = "/etc/passwd" }, "</pre>" }
- lighty.header["Content-Type"] = "text/html"
-
- return 200
-
-The lighty.content[] table is executed when the script is finished. The elements of the array are processed left to right and the elements can either be a string or a table. Strings are included AS IS into the output of the request.
-
-* Strings
-
- * are included as is
-
-* Tables
-
- * filename = "<absolute-path>" is required
- * offset = <number> [default: 0]
- * length = <number> [default: size of the file - offset]
-
-Internally lighty will use the sendfile() call to send out the static files at full speed.
-
-Status Codes
-============
-
-You might have seen it already in other examples: In case you are handling the request completly in the magnet you
-can return your own status-codes. Examples are: Redirected, Input Validation, ... ::
-
- if (lighty.env["uri.scheme"] == "http") then
- lighty.header["Location"] = "https://" .. lighty.env["uri.authority"] .. lighty.env["request.uri"]
- return 302
- end
-
-You every number above and equal to 100 is taken as final status code and finishes the request. No other modules are
-executed after this return.
-
-A special return-code is lighty.RESTART_REQUEST (currently equal to 99) which is usually used in combination with
-changing the request.uri in a rewrite. It restarts the splitting of the request-uri again.
-
-If you return nothing (or nil) the request-handling just continues.
-
-Debugging
-=========
-
-To easy debugging we overloaded the print()-function in lua and redirect the output of print() to the error-log. ::
-
- print("Host: " .. lighty.request["Host"])
- print("Request-URI: " .. lighty.env["request.uri"])
-
-
-Examples
-========
-
-Sending text-files as HTML
---------------------------
-
-This is a bit simplistic, but it illustrates the idea: Take a text-file and cover it in a <pre> tag.
-
-Config-file ::
-
- magnet.attract-physical-path-to = server.docroot + "/readme.lua"
-
-readme.lua ::
-
- lighty.content = { "<pre>", { filename = "/README" }, "</pre>" }
- lighty.header["Content-Type"] = "text/html"
-
- return 200
-
-Maintainance pages
-------------------
-
-Your side might be on maintainance from time to time. Instead of shutting down the server confusing all
-users, you can just send a maintainance page.
-
-Config-file ::
-
- magnet.attract-physical-path-to = server.docroot + "/maintainance.lua"
-
-maintainance.lua ::
-
- require "lfs"
-
- if (nil == lfs.attributes(lighty.env["physical.doc-root"] .. "/maintainance.html")) then
- lighty.content = ( lighty.env["physical.doc-root"] .. "/maintainance.html" )
-
- lighty.header["Content-Type"] = "text/html"
-
- return 200
- end
-
-mod_flv_streaming
------------------
-
-Config-file ::
-
- magnet.attract-physical-path-to = server.docroot + "/flv-streaming.lua"
-
-flv-streaming.lua::
-
- if (lighty.env["uri.query"]) then
- -- split the query-string
- get = {}
- for k, v in string.gmatch(lighty.env["uri.query"], "(%w+)=(%w+)") do
- get[k] = v
- end
-
- if (get["start"]) then
- -- missing: check if start is numeric and positive
-
- -- send te FLV header + a seek into the file
- lighty.content = { "FLV\x1\x1\0\0\0\x9\0\0\0\x9",
- { filename = lighty.env["physical.path"], offset = get["start"] } }
- lighty.header["Content-Type"] = "video/x-flv"
-
- return 200
- end
- end
-
-
-selecting a random file from a directory
-----------------------------------------
-
-Say, you want to send a random file (ad-content) from a directory.
-
-To simplify the code and to improve the performance we define:
-
-* all images have the same format (e.g. image/png)
-* all images use increasing numbers starting from 1
-* a special index-file names the highest number
-
-Config ::
-
- server.modules += ( "mod_magnet" )
- magnet.attract-physical-path-to = "random.lua"
-
-random.lua ::
-
- dir = lighty.env["physical.path"]
-
- f = assert(io.open(dir .. "/index", "r"))
- maxndx = f:read("*all")
- f:close()
-
- ndx = math.random(maxndx)
-
- lighty.content = { { filename = dir .. "/" .. ndx }}
- lighty.header["Content-Type"] = "image/png"
-
- return 200
-
-denying illegal character sequences in the URL
-----------------------------------------------
-
-Instead of implementing mod_security, you might just want to apply filters on the content
-and deny special sequences that look like SQL injection.
-
-A common injection is using UNION to extend a query with another SELECT query.
-
-::
-
- if (string.find(lighty.env["request.uri"], "UNION%s")) then
- return 400
- end
-
-Traffic Quotas
---------------
-
-If you only allow your virtual hosts a certain amount for traffic each month and want to
-disable them if the traffic is reached, perhaps this helps: ::
-
- host_blacklist = { ["www.example.org"] = 0 }
-
- if (host_blacklist[lighty.request["Host"]]) then
- return 404
- end
-
-Just add the hosts you want to blacklist into the blacklist table in the shown way.
-
-Complex rewrites
-----------------
-
-If you want to implement caching on your document-root and only want to regenerate
-content if the requested file doesn't exist, you can attract the physical.path: ::
-
- magnet.attract-physical-path-to = ( server.document-root + "/rewrite.lua" )
-
-rewrite.lua ::
-
- require "lfs"
-
- attr = lfs.attributes(lighty.env["physical.path"])
-
- if (not attr) then
- -- we couldn't stat() the file for some reason
- -- let the backend generate it
-
- lighty.env["uri.path"] = "/dispatch.fcgi"
- lighty.env["physical.rel-path"] = lighty.env["uri.path"]
- lighty.env["physical.path"] = lighty.env["physical.doc-root"] .. lighty.env["physical.rel-path"]
- fi
-
-luafilesystem
-+++++++++++++
-
-We are requiring the lua-module 'lfs' (http://www.keplerproject.org/luafilesystem/).
-
-I had to compile lfs myself for lua-5.1 which required a minor patch as compat-5.1 is not needed::
-
- $ wget http://luaforge.net/frs/download.php/1487/luafilesystem-1.2.tar.gz
- $ wget http://www.lighttpd.net/download/luafilesystem-1.2-lua51.diff
- $ gzip -cd luafilesystem-1.2.tar.gz | tar xf -
- $ cd luafilesystem-1.2
- $ patch -ls -p1 < ../luafilesystem-1.2-lua51.diff
- $ make install
-
-It will install lfs.so into /usr/lib/lua/5.1/ which is where lua expects the extensions on my system.
-
-SuSE and Gentoo are known to have their own lfs packages and don't require a compile.
-
-Usertracking
-------------
-
-... or how to store data globally in the script-context:
-
-Each script has its own script-context. When the script is started it only contains the lua-functions
-and the special lighty.* name-space. If you want to save data between script runs, you can use the global-script
-context:
-
-::
-
- if (nil == _G["usertrack"]) then
- _G["usertrack"] = {}
- end
- if (nil == _G["usertrack"][lighty.request["Cookie"]]) then
- _G["usertrack"][lighty.request["Cookie"]]
- else
- _G["usertrack"][lighty.request["Cookie"]] = _G["usertrack"][lighty.request["Cookie"]] + 1
- end
-
- print _G["usertrack"][lighty.request["Cookie"]]
-
-The global-context is per script. If you update the script without restarting the server, the context will still be maintained.
-
-Counters
---------
-
-mod_status support a global statistics page and mod_magnet allows to add and update values in the status page:
-
-Config ::
-
- status.statistics-url = "/server-counters"
- magnet.attract-raw-url-to = server.docroot + "/counter.lua"
-
-counter.lua ::
-
- lighty.status["core.connections"] = lighty.status["core.connections"] + 1
-
-Result::
-
- core.connections: 7
- fastcgi.backend.php-foo.0.connected: 0
- fastcgi.backend.php-foo.0.died: 0
- fastcgi.backend.php-foo.0.disabled: 0
- fastcgi.backend.php-foo.0.load: 0
- fastcgi.backend.php-foo.0.overloaded: 0
- fastcgi.backend.php-foo.1.connected: 0
- fastcgi.backend.php-foo.1.died: 0
- fastcgi.backend.php-foo.1.disabled: 0
- fastcgi.backend.php-foo.1.load: 0
- fastcgi.backend.php-foo.1.overloaded: 0
- fastcgi.backend.php-foo.load: 0
-
-Porting mod_cml scripts
------------------------
-
-mod_cml got replaced by mod_magnet.
-
-A CACHE_HIT in mod_cml::
-
- output_include = { "file1", "file2" }
-
- return CACHE_HIT
-
-becomes::
-
- content = { { filename = "/path/to/file1" }, { filename = "/path/to/file2"} }
-
- return 200
-
-while a CACHE_MISS like (CML) ::
-
- trigger_handler = "/index.php"
-
- return CACHE_MISS
-
-becomes (magnet) ::
-
- lighty.env["request.uri"] = "/index.php"
-
- return lighty.RESTART_REQUEST
-
-}}}
Deleted: lighttpd/trunk/doc/mysqlvhost.txt
===================================================================
--- lighttpd/trunk/doc/mysqlvhost.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/mysqlvhost.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,58 +0,0 @@
-====================
-MySQL-based vhosting
-====================
-
------------------------
-Module: mod_mysql_vhost
------------------------
-
-:Author: ada at riksnet.se
-:Date: $Date: 2004/08/29 09:43:49 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- This module provides virtual hosts (vhosts) based on a MySQL table
-
-.. meta::
- :keywords: lighttpd, mysql, vhost
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-With MySQL-based vhosting you can store the path to a given host's
-document root in a MySQL database.
-
-.. note:: Keep in mind that only one vhost module should be active at a time.
- Don't mix mod_simple_vhost with mod_mysql_vhost.
-
-Options
-=======
-
-Example: ::
-
- mysql-vhost.db = "lighttpd"
- mysql-vhost.user = "lighttpd"
- mysql-vhost.pass = "secret"
- mysql-vhost.sock = "/var/mysql.lighttpd.sock"
- mysql-vhost.sql = "SELECT docroot FROM domains WHERE domain='?'"
-
-
-MySQL setup: ::
-
- GRANT SELECT ON lighttpd.* TO lighttpd at localhost IDENTIFIED BY 'secret';
-
- CREATE DATABASE lighttpd;
-
- USE lighttpd;
-
- CREATE TABLE domains (
- domain varchar(64) not null primary key,
- docroot varchar(128) not null
- );
-
- INSERT INTO domains VALUES ('host.dom.ain','/http/host.dom.ain/');
-
-
-
Deleted: lighttpd/trunk/doc/performance.txt
===================================================================
--- lighttpd/trunk/doc/performance.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/performance.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,239 +0,0 @@
-========================
-Performance Improvements
-========================
-
-------------
-Module: core
-------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.3 $
-
-:abstract:
- handling performance issues in lighttpd
-
-.. meta::
- :keywords: lighttpd, performance
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Performance Issues
-------------------
-
-lighttpd is optimized into varying directions. The most important direction is
-performance. The operation system has two major facilities to help lighttpd
-a deliver its best performance.
-
-HTTP Keep-Alive
----------------
-
-Disabling keep-alive might help your server if you suffer from a large
-number of open file descriptors.
-
-The defaults for the server are: ::
-
- server.max-keep-alive-requests = 128
- server.max-keep-alive-idle = 30
- server.max-read-idle = 60
- server.max-write-idle = 360
-
-handling 128 keep-alive requests in a row on a single connection, waiting 30 seconds
-before an unused keep-alive connection gets dropped by lighttpd.
-
-If you handle several connections at once under a high load (let's assume 500 connections
-in parallel for 24h) you might run into the out-of-fd problem described below. ::
-
- server.max-keep-alive-requests = 4
- server.max-keep-alive-idle = 4
-
-would release the connections earlier and would free file descriptors without a
-detrimental performance loss.
-
-Disabling keep-alive completely is the last resort if you are still short on file descriptors: ::
-
- server.max-keep-alive-requests = 0
-
-Event Handlers
---------------
-
-The first one is the Event Handler which takes care of notifying the server
-that one of the connections is ready to send or receive. As you can see,
-every OS has at least the select() call which has some limitations.
-
-============ ========== ===============
-OS Method Config Value
-============ ========== ===============
-all select select
-Unix poll poll
-Linux 2.4+ rt-signals linux-rtsig
-Linux 2.6+ epoll linux-sysepoll
-Solaris /dev/poll solaris-devpoll
-FreeBSD, ... kqueue freebsd-kqueue
-============ ========== ===============
-
-
-For more information on this topic take a look at http://www.kegel.com/c10k.html
-
-Configuration
-`````````````
-
-The event handler can be set by specifying the 'Config Value' from above
-in the ``server.event-handler`` variable
-
-e.g.: ::
-
- server.event-handler = "linux-sysepoll"
-
-Network Handlers
-----------------
-
-The basic network interface for all platforms at the syscalls read() and
-write(). Every modern OS provides its own syscall to help network servers
-transfer files as fast as possible.
-
-If you want to send out a file from the webserver, it doesn't make any sense
-to copy the file into the webserver just to write() it back into a socket
-in the next step.
-
-sendfile() minimizes the work in the application and pushes a file directly
-into the network card (ideally).
-
-lighttpd supports all major platform-specific calls:
-
-========== ==========
-OS Method
-========== ==========
-all write
-Unix writev
-Linux 2.4+ sendfile
-Linux 2.6+ sendfile64
-Solaris sendfilev
-FreeBSD sendfile
-========== ==========
-
-The best backend is selected at compile time. In case you want to use
-another backend set: ::
-
- server.network-backend = "writev"
-
-You can find more information about network backend in:
-
- http://blog.lighttpd.net/articles/2005/11/11/optimizing-lighty-for-high-concurrent-large-file-downloads
-
-
-Max Connections
----------------
-
-As lighttpd is a single-threaded server, its main resource limit is the
-number of file descriptors, which is set to 1024 by default (on most systems).
-
-If you are running a high-traffic site you might want to increase this limit
-by setting ::
-
- server.max-fds = 2048
-
-This only works if lighttpd is started as root.
-
-Out-of-fd condition
--------------------
-
-Since file descriptors are used for TCP/IP sockets, files and directories,
-a simple request for a PHP page might result in using 3 file descriptors:
-
-1. the TCP/IP socket to the client
-2. the TCP/IP and Unix domain socket to the FastCGI process
-3. the filehandle to the file in the document root to check if it exists
-
-If lighttpd runs out of file descriptors, it will stop accepting new
-connections for awhile to use the existing file descriptors to handle the
-currently-running requests.
-
-If more than 90% of the file descriptors are used then the handling of new
-connections is disabled. If it drops below 80% again new connections will
-be accepted again.
-
-Under some circumstances you will see ::
-
- ... accept() failed: Too many open files
-
-in the error log. This tells you there were too many new requests at once
-and lighttpd could not disable the incoming connections soon enough. The
-connection was dropped and the client received an error message like 'connection
-failed'. This is very rare and might only occur in test setups.
-
-Increasing the ``server.max-fds`` limit will reduce the probability of this
-problem.
-
-stat() cache
-============
-
-A stat(2) can be expensive; caching it saves time and context switches.
-
-Instead of using stat() every time to check for the existence of a file
-you can stat() it once and monitor the directory the file is in for
-modifications. As long as the directory doesn't change, the files in it
-must all still be the same.
-
-With the help of FAM or gamin you can use kernel events to assure that
-your stat cache is up to date. ::
-
- server.stat-cache-engine = "fam" # either fam, simple or disabled
-
-
-Platform-Specific Notes
-=======================
-
-Linux
------
-
-For Linux 2.4.x you should think about compiling lighttpd with the option
-``--disable-lfs`` to disable the support for files larger than 2GB. lighttpd will
-fall back to the ``writev() + mmap()`` network calls which is ok, but not as
-fast as possible but support files larger than 2GB.
-
-Disabling the TCP options reduces the overhead of each TCP packet and might
-help to get the last few percent of performance out of the server. Be aware that
-disabling these options most likely decreases performance for high-latency and lossy
-links.
-
-- net.ipv4.tcp_sack = 0
-- net.ipv4.tcp_timestamps = 0
-
-Increasing the TCP send and receive buffers will increase the performance a
-lot if (and only if) you have a lot of large files to send.
-
-- net.ipv4.tcp_wmem = 4096 65536 524288
-- net.core.wmem_max = 1048576
-
-If you have a lot of large file uploads, increasing the receive buffers will help.
-
-- net.ipv4.tcp_rmem = 4096 87380 524288
-- net.core.rmem_max = 1048576
-
-Keep in mind that every TCP connection uses the configured amount of memory for socket
-buffers. If you've got many connections this can quickly drain the available memory.
-
-See http://www.acc.umu.se/~maswan/linux-netperf.txt for more information on these parameters.
-
-FreeBSD
--------
-
-On FreeBSD you might gain some performance by enabling accept filters. Just
-compile your kernel with: ::
-
- options ACCEPT_FILTER_HTTP
-
-For more ideas about tuning FreeBSD read: tuning(7)
-
-Reducing the recvspace should always be ok if the server only handles HTTP
-requests without large uploads. Increasing the sendspace would reduce the
-system load if you have a lot of large files to be sent, but keep in mind that
-you have to provide the memory in the kernel for each connection. 1024 * 64KB
-would mean 64MB of kernel RAM. Keep this in mind.
-
-- net.inet.tcp.recvspace = 4096
-
Deleted: lighttpd/trunk/doc/plugins.txt
===================================================================
--- lighttpd/trunk/doc/plugins.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/plugins.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,260 +0,0 @@
-================
-Plugin Interface
-================
-
-------------
-Module: core
-------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/01 07:01:29 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- The plugin interface is an integral part of lighttpd which
- provides a flexible way to add specific functionality to lighttpd.
-
-.. meta::
- :keywords: lighttpd, plugins
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Plugins allow you to enhance the functionality of lighttpd without
-changing the core of the webserver. They can be loaded at startup time
-and can change virtually any aspect of the behaviour of the webserver.
-
-Plugin Entry Points
--------------------
-
-lighttpd has 16 hooks which are used in different states of the
-execution of the request:
-
-Serverwide hooks
-````````````````
-
-:init_:
- called when the plugin is loaded
-:cleanup_:
- called when the plugin is unloaded
-:set_defaults_:
- called when the configuration has to be processed
-:handle_trigger_:
- called once a second
-:handle_sighup_:
- called when the server received a SIGHUP
-
-Connectionwide hooks
-````````````````````
-
-Most of these hooks are called in ``http_response_prepare()`` after some
-fields in the connection structure are set.
-
-:handle_uri_raw_:
- called after uri.path_raw, uri.authority and uri.scheme are set
-:handle_uri_clean_:
- called after uri.path (a clean URI without .. and %20) is set
-:handle_docroot_:
- called at the end of the logical path handle to get a docroot
-:handle_subrequest_start_:
- called if the physical path is set up and checked
-:handle_subrequest_:
- called at the end of ``http_response_prepare()``
-:handle_physical_path_:
- called after the physical path is created and no other handler is
- found for this request
-:handle_request_done_:
- called when the request is done
-:handle_connection_close_:
- called if the connection has to be closed
-:handle_joblist_:
- called after the connection_state_engine is left again and plugin
- internal handles have to be called
-:connection_reset_:
- called if the connection structure has to be cleaned up
-
-
-Plugin Interface
-----------------
-
-\*_plugin_init
-``````````````
-
-Every plugin has a uniquely-named function which is called after the
-plugin is loaded. It is used to set up the ``plugin`` structure with
-some useful data:
-
-- name of the plugin ``name``
-- all hooks
-
-The field ``data`` and ``lib`` should not be touched in the init function.
-``lib`` is the library handler from dlopen and ``data`` will be the storage
-of the internal plugin data.
-
-:returns:
- 0 (not handled)
-
-init
-````
-
-The first real call of a plugin function is the init hook which is used
-to set up the internal plugin data. The internal plugin is assigned the
-``data`` field mentioned in the \*_plugin_init description.
-
-:returns:
- a pointer to the internal plugin data.
-
-cleanup
-```````
-
-The cleanup hook is called just before the plugin is unloaded. It is meant
-to free all buffers allocated in ``init`` or somewhere else in the plugin
-which are still not freed and to close all handles which were opened and
-are not closed yet.
-
-:returns:
- HANDLER_GO_ON if ok (not handled)
-
-set_defaults
-````````````
-
-set_defaults is your entry point into the configfile parsing. It should
-pass a list of options to ``config_insert_values`` and check if
-the plugin configuration is valid. If it is not valid yet, it should
-set useful defaults or return with HANDLER_ERROR and an error message.
-
-:returns:
- HANDLER_GO_ON if ok
-
- HANDLER_ERROR will terminate lighttpd
-
-connection_reset
-````````````````
-
-called at the end of each request
-
-:returns:
- HANDLER_GO_ON if ok
-
- HANDLER_ERROR on error
-
-handle_trigger
-``````````````
-
-called once a second
-
-:returns:
- HANDLER_GO_ON if ok
-
- HANDLER_ERROR on error
-
-handle_sighup
-`````````````
-
-called if a SIGHUP is received (cycling logfiles, ...)
-
-:returns:
- HANDLER_GO_ON if ok
-
- HANDLER_ERROR on error
-
-handle_uri_raw
-``````````````
-
-called after uri_raw is set
-
-:returns:
- HANDLER_GO_ON if ok
- HANDLER_FINISHED if the final output is prepared
-
- HANDLER_ERROR on error
-
-handle_uri_clean
-````````````````
-
-called after uri.path is set
-
-:returns:
- HANDLER_GO_ON if ok
- HANDLER_FINISHED if the final output is prepared
-
- HANDLER_ERROR on error
-
-handle_docroot
-``````````````
-
-called when a docroot is needed
-
-:returns:
- HANDLER_GO_ON if ok
- HANDLER_FINISHED if the final output is prepared
-
- HANDLER_ERROR on error
-
-handle_subrequest_start
-```````````````````````
-
-called after physical.path is set
-
-:returns:
- HANDLER_GO_ON if ok
- HANDLER_FINISHED if the final output is prepared
-
- HANDLER_ERROR on error
-
-handle_subrequest
-`````````````````
-
-called if subrequest_start requested a COMEBACK or a WAIT_FOR_EVENT
-
-:returns:
- HANDLER_GO_ON if ok
- HANDLER_FINISHED if the final output is prepared
-
- HANDLER_ERROR on error
-
-handle_physical_path
-````````````````````
-
-called after physical.path is set
-
-:returns:
- HANDLER_GO_ON if ok
- HANDLER_FINISHED if the final output is prepared
-
- HANDLER_ERROR on error
-
-
-handle_request_done
-```````````````````
-
-called at the end of the request (logging, statistics, ...)
-
-:returns:
- HANDLER_GO_ON if ok
-
- HANDLER_ERROR on error
-
-handle_connection_close
-```````````````````````
-
-called if the connection is terminated
-
-:returns:
- HANDLER_GO_ON if ok
-
- HANDLER_ERROR on error
-
-handle_joblist
-``````````````
-
-called if the state of the connection has changed
-
-:returns:
- HANDLER_GO_ON if ok
-
- HANDLER_ERROR on error
-
-
Deleted: lighttpd/trunk/doc/proxy.txt
===================================================================
--- lighttpd/trunk/doc/proxy.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/proxy.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,104 +0,0 @@
-===================
-the Proxy Interface
-===================
-
------------------
-Module: mod_proxy
------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/01 07:01:29 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- The proxy module a simplest way to connect lighttpd to
- java servers which have a HTTP-interface.
-
-.. meta::
- :keywords: lighttpd, Proxy
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-...
-
-Options
-=======
-
-lighttpd provides the Proxy support via the proxy-module
-(mod_proxy) which provides 2 options in the config-file:
-
-:proxy.debug:
- a value between 0 and 65535 to set the debug-level in the
- Proxy module. Currently only 0 and 1 are used. Use 1 to
- enable some debug output, 0 to disable it.
-
-:proxy.balance:
- might be one of 'hash', 'round-robin' or 'fair' (default).
-
- 'round-robin' choses another host for each request, 'hash'
- is generating a hash over the request-uri and makes sure
- that the same request URI is sent to always the same host.
- That can increase the performance of the backend servers
- a lot due to higher cache-locality. 'fair' is the normal
- load-based, passive balancing.
-
-:proxy.server:
- tell the module where to send Proxy requests to. Every
- file-extension can have its own handler. Load-Balancing is
- done by specifying multiple handles for the same extension.
-
- structure of proxy.server section: ::
-
- ( <extension> =>
- (
- ( "host" => <string> ,
- "port" => <integer> ),
- ( "host" => <string> ,
- "port" => <integer> )
- ),
- <extension> => ...
- )
-
- :<extension>: is the file-extension or prefix (if started with "/")
- might empty to match all requests
- :"host": is ip of the proxy server
- :"port": is tcp-port on the "host" used by the proxy
- server (default: 80)
-
- e.g.: ::
-
- proxy.server = ( ".jsp" =>
- ( (
- "host" => "10.0.0.242",
- "port" => 81
- ) )
- )
-
-Example:
-========
-
-Using lighttpd + mod_proxy in front of 8 Squids which handle the
-caching of dynamic content for you. All requests for the host
-www.example.org should be forwarded to the proxy. All proxies
-listen on port 80 for requests. ::
-
- $HTTP["host"] == "www.example.org" {
- proxy.balance = "hash"
- proxy.server = ( "" => ( ( "host" => "10.0.0.10" ),
- ( "host" => "10.0.0.11" ),
- ( "host" => "10.0.0.12" ),
- ( "host" => "10.0.0.13" ),
- ( "host" => "10.0.0.14" ),
- ( "host" => "10.0.0.15" ),
- ( "host" => "10.0.0.16" ),
- ( "host" => "10.0.0.17" ) ) )
- }
-
-If one of the hosts goes down the all requests for this one server are
-moved equally to the other servers. If you want to know more about
-the algorithm used here google for 'Microsoft CARP'.
-
-
Deleted: lighttpd/trunk/doc/redirect.txt
===================================================================
--- lighttpd/trunk/doc/redirect.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/redirect.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,47 +0,0 @@
-===============
-URL Redirection
-===============
-
---------------------
-Module: mod_redirect
---------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:43:49 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- url redirection
-
-.. meta::
- :keywords: lighttpd, redirect
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-...
-
-Options
-=======
-
-url.redirect
- redirects a set of URLs externally
-
- e.g. ::
-
- url.redirect = ( "^/show/([0-9]+)/([0-9]+)$" => "http://www.example.org/show.php?isdn=$1&page$2",
- "^/get/([0-9]+)/([0-9]+)$" => "http://www.example.org/get.php?isdn=$1&page$2" )
-
- # make a external redirect
- # from any www.host (with www.) to the host (without www.)
- $HTTP["host"] =~ "^www\.(.*)" {
- url.redirect = ( "^/(.*)" => "http://%1/$1" )
- }
-
-Warning
-=======
-
-Do NOT use mod_redirect to protect specific urls, as the original url passed from the client
-is matched against your rules, for example strings like "/abc/../xyz%2f/path".
Deleted: lighttpd/trunk/doc/rewrite.txt
===================================================================
--- lighttpd/trunk/doc/rewrite.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/rewrite.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,77 +0,0 @@
-============
-URL Rewrites
-============
-
--------------------
-Module: mod_rewrite
--------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- url rewrite
-
-.. meta::
- :keywords: lighttpd, rewrite
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-internal redirects, url rewrite
-
-Options
-=======
-
-url.rewrite-once
- rewrites a set of URLs interally in the webserver BEFORE they are handled.
-
- e.g. ::
-
- url.rewrite-once = ( "<regex>" => "<relative-uri>" )
-
-url.rewrite-repeat
- rewrites a set of URLs interally in the webserver BEFORE they are handled
-
- e.g. ::
-
- url.rewrite-repeat = ( "<regex>" => "<relative-uri>" )
-
-The options ``url.rewrite`` and ``url.rewrite-final`` were mapped to ``url.rewrite-once``
-in 1.3.16.
-
-Warning
-=======
-
-Do NOT use mod_rewrite to protect specific urls, as the original url passed from the client
-is matched against your rules, for example strings like "/abc/../xyz%2f/path".
-
-Examples
-========
-
-The regex is matching the full REQUEST_URI which is supplied by the user including
-query-string.::
-
- url.rewrite-once = ( "^/id/([0-9]+)$" => "/index.php?id=$1",
- "^/link/([a-zA-Z]+)" => "/index.php?link=$1" )
-
-
-
- # the following example, is, however just simulating vhost by rewrite
- # * you can never change document-root by mod_rewrite
- # use mod_*host instead to make real mass-vhost
-
- # request: http://any.domain.com/url/
- # before rewrite: REQUEST_URI="/www/htdocs/url/"
- # and DOCUMENT_ROOT="/www/htdocs/" %0="www.domain.com" $1="url/"
- # after rewrite: REQUEST_URI="/www/htdocs/domain.com/url/"
- # still, you have DOCUMENT_ROOT=/www/htdocs/
-
- server.document-root = "/www/htdocs/"
- $HTTP["host"] =~ "^.*\.([^.]+\.com)$" {
- url.rewrite-once = ( "^/(.*)" => "/%0/$1" )
- }
-
Deleted: lighttpd/trunk/doc/rrdtool.txt
===================================================================
--- lighttpd/trunk/doc/rrdtool.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/rrdtool.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,111 +0,0 @@
-=======
-rrdtool
-=======
-
--------------------
-Module: mod_rrdtool
--------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:43:49 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- mod_rrdtool is used to monitor the traffic and load on the webserver
-
-.. meta::
- :keywords: lighttpd, skeleton
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-RRD_ is a system to store and display time-series data (i.e. network
-bandwidth, machine-room temperature, server load average).
-
-.. _RRD: http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/
-
-Options
-=======
-
-rrdtool.binary
- path to the rrdtool binary
-
- e.g.: ::
-
- rrdtool.binary = "/usr/bin/rrdtool"
-
-rrdtool.db-name
- filename of the rrd-database. Make sure that <rrdtool.db-name> doesn't exist
- before the first run, as lighttpd has to create the DB for you.
-
- e.g.: ::
-
- rrdtool.db-name = "/var/www/lighttpd.rrd"
-
-Generating Graphs
-=================
-
-::
-
- #!/bin/sh
-
- RRDTOOL=/usr/bin/rrdtool
- OUTDIR=/var/www/servers/www.example.org/pages/rrd/
- INFILE=/var/www/lighttpd.rrd
- OUTPRE=lighttpd-traffic
-
- DISP="-v bytes --title TrafficWebserver \
- DEF:binraw=$INFILE:InOctets:AVERAGE \
- DEF:binmaxraw=$INFILE:InOctets:MAX \
- DEF:binminraw=$INFILE:InOctets:MIN \
- DEF:bout=$INFILE:OutOctets:AVERAGE \
- DEF:boutmax=$INFILE:OutOctets:MAX \
- DEF:boutmin=$INFILE:OutOctets:MIN \
- CDEF:bin=binraw,-1,* \
- CDEF:binmax=binmaxraw,-1,* \
- CDEF:binmin=binminraw,-1,* \
- CDEF:binminmax=binmaxraw,binminraw,- \
- CDEF:boutminmax=boutmax,boutmin,- \
- AREA:binmin#ffffff: \
- STACK:binmax#f00000: \
- LINE1:binmin#a0a0a0: \
- LINE1:binmax#a0a0a0: \
- LINE2:bin#a0a735:incoming \
- GPRINT:bin:MIN:%.2lf \
- GPRINT:bin:AVERAGE:%.2lf \
- GPRINT:bin:MAX:%.2lf \
- AREA:boutmin#ffffff: \
- STACK:boutminmax#00f000: \
- LINE1:boutmin#a0a0a0: \
- LINE1:boutmax#a0a0a0: \
- LINE2:bout#a0a735:outgoing \
- GPRINT:bout:MIN:%.2lf \
- GPRINT:bout:AVERAGE:%.2lf \
- GPRINT:bout:MAX:%.2lf \
- "
-
-
- $RRDTOOL graph $OUTDIR/$OUTPRE-hour.png -a PNG --start -14400 $DISP
- $RRDTOOL graph $OUTDIR/$OUTPRE-day.png -a PNG --start -86400 $DISP
- $RRDTOOL graph $OUTDIR/$OUTPRE-month.png -a PNG --start -2592000 $DISP
-
- OUTPRE=lighttpd-requests
-
- DISP="-v req --title RequestsperSecond -u 1 \
- DEF:req=$INFILE:Requests:AVERAGE \
- DEF:reqmax=$INFILE:Requests:MAX \
- DEF:reqmin=$INFILE:Requests:MIN \
- CDEF:reqminmax=reqmax,reqmin,- \
- AREA:reqmin#ffffff: \
- STACK:reqminmax#0e0e0e: \
- LINE1:reqmin#a0a0a0: \
- LINE1:reqmax#a0a0a0: \
- LINE2:req#00a735:requests"
-
-
- $RRDTOOL graph $OUTDIR/$OUTPRE-hour.png -a PNG --start -14400 $DISP
- $RRDTOOL graph $OUTDIR/$OUTPRE-day.png -a PNG --start -86400 $DISP
- $RRDTOOL graph $OUTDIR/$OUTPRE-month.png -a PNG --start -2592000 $DISP
-
Deleted: lighttpd/trunk/doc/scgi.txt
===================================================================
--- lighttpd/trunk/doc/scgi.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/scgi.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,33 +0,0 @@
-==================
-the SCGI Interface
-==================
-
--------------------
-Module: mod_scgi
--------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.3 $
-
-:abstract:
- SCGI is a fast and simplified CGI interface. It is mostly
- used by Python + WSGI.
-
-.. meta::
- :keywords: lighttpd, FastCGI
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-The SCGI module is heavily based on the FastCGI when it comes
-to configuration. Only the internal protocol between server
-and client has been replaced. Please check the documentation
-of the FastCGI module for more information.
-
-History
-=======
-
-Added in lighttpd 1.3.14 as it was really simple to do.
Modified: lighttpd/trunk/doc/scripts/Makefile.in
===================================================================
--- lighttpd/trunk/doc/scripts/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/scripts/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -75,6 +75,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -108,6 +109,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -151,6 +153,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -183,7 +186,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Deleted: lighttpd/trunk/doc/secdownload.txt
===================================================================
--- lighttpd/trunk/doc/secdownload.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/secdownload.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,147 +0,0 @@
-===========================
-Secure and Fast Downloading
-===========================
-
------------------------
-Module: mod_secdownload
------------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/01 07:01:29 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- authenticated file requests and a countermeasure against
- deep-linking can be achieved easily by using mod_secdownload
-
-.. meta::
- :keywords: lighttpd, secure, fast, downloads
-
-.. contents:: Table of Contents
-
-Options
-=======
-
-::
-
- secdownload.secret = <string>
- secdownload.document-root = <string>
- secdownload.uri-prefix = <string> (default: /)
- secdownload.timeout = <short> (default: 60 seconds)
-
-Description
-===========
-
-there are multiple ways to handle secured download mechanisms:
-
-1. use the webserver and the internal HTTP authentication
-2. use the application to authenticate and send the file
- through the application
-
-Both ways have limitations:
-
-webserver:
-
-- ``+`` fast download
-- ``+`` no additional system load
-- ``-`` inflexible authentication handling
-
-application:
-
-- ``+`` integrated into the overall layout
-- ``+`` very flexible permission management
-- ``-`` the download occupies an application thread/process
-
-A simple way to combine the two ways could be:
-
-1. app authenticates user and checks permissions to
- download the file.
-2. app redirects user to the file accessable by the webserver
- for further downloading.
-3. the webserver transfers the file to the user.
-
-As the webserver doesn't know anything about the permissions
-used in the app, the resulting URL would be available to every
-user who knows the URL.
-
-mod_secdownload removes this problem by introducing a way to
-authenticate a URL for a specified time. The application has
-to generate a token and a timestamp which are checked by the
-webserver before it allows the file to be downloaded by the
-webserver.
-
-The generated URL has to have the format:
-
-<uri-prefix><token>/<timestamp-in-hex><rel-path>
-
-<token> is an MD5 of
-
-1. a secret string (user supplied)
-2. <rel-path> (starts with /)
-3. <timestamp-in-hex>
-
-
-As you can see, the token is not bound to the user at all. The
-only limiting factor is the timestamp which is used to
-invalidate the URL after a given timeout (secdownload.timeout).
-
-.. Note::
- Be sure to choose a another secret than the one used in the
- examples, as this is the only part of the token that is not
- known to the user.
-
-
-
-If the user tries to fake the URL by choosing a random token,
-status 403 'Forbidden' will be sent out.
-
-If the timeout is reached, status 408 'Request Timeout' will be
-sent. (This does not really conform to the standard, but should
-do the trick).
-
-If token and timeout are valid, the <rel-path> is appended to
-the configured (secdownload.document-root) and passed to the
-normal internal file transfer functionality. This might lead to
-status 200 or 404.
-
-Example
-=======
-
-Application
------------
-
-Your application has to generate the correct URLs. The following sample
-code for PHP should be easily adaptable to any other language: ::
-
- <?php
-
- $secret = "verysecret";
- $uri_prefix = "/dl/";
-
- # filename
- $f = "/secret-file.txt";
-
- # current timestamp
- $t = time();
-
- $t_hex = sprintf("%08x", $t);
- $m = md5($secret.$f.$t_hex);
-
- # generate link
- printf('<a href="%s%s/%s%s">%s</a>',
- $uri_prefix, $m, $t_hex, $f, $f);
- ?>
-
-Webserver
----------
-
-The server has to be configured in the same way. The URI prefix and
-secret have to match: ::
-
- server.modules = ( ..., "mod_secdownload", ... )
-
- secdownload.secret = "verysecret"
- secdownload.document-root = "/home/www/servers/download-area/"
- secdownload.uri-prefix = "/dl/"
- secdownload.timeout = 120
-
Deleted: lighttpd/trunk/doc/security.txt
===================================================================
--- lighttpd/trunk/doc/security.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/security.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,60 +0,0 @@
-=================
-Security Features
-=================
-
-------------
-Module: core
-------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:44:53 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- lighttpd was developed with security in mind ...
-
-.. meta::
- :keywords: lighttpd, security
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Limiting POST requests
-----------------------
-
-
-
-::
-
- server.max-request-size = <kbyte>
-
-System Security
----------------
-
-Running daemons as root with full privileges is a bad idea in general.
-lighttpd runs best without any extra privileges and runs perfectly in chroot.
-
-Change Root
-```````````
-
-server.chroot = "..."
-
-Drop root privileges
-````````````````````
-
-server.username = "..."
-server.groupname = "..."
-
-FastCGI
-```````
-
-fastcgi + chroot
-
-Permissions
-```````````
-
-::
-
- $ useradd wwwrun ...
Deleted: lighttpd/trunk/doc/setenv.txt
===================================================================
--- lighttpd/trunk/doc/setenv.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/setenv.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,37 +0,0 @@
-===========================
-Conditional Request Headers
-===========================
-
-------------------
-Module: mod_setenv
-------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- mod_setenv is used to add request
-
-.. meta::
- :keywords: lighttpd, skeleton
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-...
-
-Options
-=======
-
-setenv.add-environment
- adds a value to the process environment that is passed to the external applications
-
-
-setenv.add-response-header
- adds a header to the HTTP response sent to the client
-
-setenv.add-request-header
- adds a header to the HTTP request that was received from the client
Deleted: lighttpd/trunk/doc/simple-vhost.txt
===================================================================
--- lighttpd/trunk/doc/simple-vhost.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/simple-vhost.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,109 +0,0 @@
-======================
-Simple Virtual-Hosting
-======================
-
-------------------------
-Module: mod_simple_vhost
-------------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:43:49 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- virtual hosting
-
-.. meta::
- :keywords: lighttpd, virtual hosting
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Simple assumption:
-
-Every virtual host is in a directory below a base directory in a path that
-is the same as the name of the vhost. Below this vhost path might be an
-extra directory which is the document root of the vhost.
-
-The document root for each vhost is built from three values:
-
-- server-root
-- hostname
-- document-root
-
-The complete document root is constructed either by ::
-
- server-root + hostname + document-root
-
-or if this path does not exist by ::
-
- server-root + default-host + document-root
-
-A small example should make this idea clear: ::
-
- /var/www/
- /var/www/logs/
- /var/www/servers/
- /var/www/servers/www.example.org/
- /var/www/servers/www.example.org/lib/
- /var/www/servers/www.example.org/pages/
- /var/www/servers/mail.example.org/
- /var/www/servers/mail.example.org/lib/
- /var/www/servers/mail.example.org/pages/
-
- simple-vhost.server-root = "/var/www/servers/"
- simple-vhost.default-host = "www.example.org"
- simple-vhost.document-root = "pages"
-
-You can use symbolic links to map several hostnames to the same directory.
-
-Conditionals vs. simple-vhost
------------------------------
-
-You have to keep in mind that conditionals and simple-vhost interfere
-with one another. ::
-
- simple-vhost.server-root = "/var/www/servers/"
- simple-vhost.default-host = "www.example.org"
- simple-vhost.document-root = "pages"
-
- $HTTP["host"] == "news.example.org" {
- server.document-root = "/var/www/servers/news2.example.org/pages/"
- }
-
-When ``news.example.org`` is requested, the ``server.document-root``
-will be set to ``/var/www/servers/news2.example.org/pages/``, but
-simple-vhost will overwrite it shortly afterwards.
-
-If ``/var/www/servers/news.example.org/pages/`` exists, that will be
-used. If not, ``/var/www/servers/www.example.org/pages/`` will be taken
-because it is the default.
-
-To use conditionals together with simple-vhost, you should do this: ::
-
- $HTTP["host"] !~ "^(news\.example\.org)$" {
- simple-vhost.server-root = "/var/www/servers/"
- simple-vhost.default-host = "www.example.org"
- simple-vhost.document-root = "pages"
- }
-
- $HTTP["host"] == "news.example.org" {
- server.document-root = "/var/www/servers/news2.example.org/pages/"
- }
-
-It will enable simple vhosting for all hosts other than ``news.example.org``.
-
-Options
-=======
-
-simple-vhost.server-root
- root of the virtual host
-
-simple-vhost.default-host
- use this hostname if the requested hostname does not have its own directory
-
-simple-vhost.document-root
- path below the vhost directory
-
Deleted: lighttpd/trunk/doc/skeleton.txt
===================================================================
--- lighttpd/trunk/doc/skeleton.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/skeleton.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,29 +0,0 @@
-===================
-headline
-===================
-
---------------------
-Module: mod_skeleton
---------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- a nice, short abstrace about the module
-
-.. meta::
- :keywords: lighttpd, skeleton
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-...
-
-Options
-=======
-
-...
Deleted: lighttpd/trunk/doc/ssi.txt
===================================================================
--- lighttpd/trunk/doc/ssi.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/ssi.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,76 +0,0 @@
-====================
-Server-Side Includes
-====================
-
----------------
-Module: mod_ssi
----------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:44:53 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- The module for server-side includes provides a compatability
- layer for NSCA/Apache SSI.
-
-.. meta::
- :keywords: lighttpd, ssi, Server-Side Includes
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Configuration
--------------
-
-::
-
- server.modules = ( ..., "mod_ssi", ... )
- ssi.extension = ( ".shtml" )
-
-Supported Options
------------------
-
-- ``<!--#echo var="..." -->``
-- ``<!--#include (file="..."\|virtual="...") -->``
-- ``<!--#flastmod (file="..."\|virtual="...") -->``
-- ``<!--#fsize (file="..."\|virtual="...") -->``
-- ``<!--#config timefmt="..." sizefmt="(bytes|abbrev)" -->``
-- ``<!--#printenv -->``
-- ``<!--#set var="..." value="..." -->``
-- ``<!--#if expr="..." -->``
-- ``<!--#elif expr="..." -->``
-- ``<!--#else -->``
-- ``<!--#endif -->``
-
-Expression Handling
--------------------
-
-Every ''expr'' is interpreted:
-
-- logical: AND, OR, !
-- compare: =, <, <=, >, =>, !=
-- precedence: (, )
-- quoted strings: 'string with a dollar: $FOO'
-- variable substitution: $REMOTE_ADDR
-- unquoted strings: string
-
-Flow Control
-------------
-
-if, elif, else and endif can only be used to insert content under special
-conditions.
-
-Unsupported Features
---------------------
-
-The original SSI module from NCSA and Apache provided some more options
-which are not supported by this module for various reasons:
-
-- exec
-- nested virtual
-- config.errmsg
-- echo.encoding
-
Deleted: lighttpd/trunk/doc/ssl.txt
===================================================================
--- lighttpd/trunk/doc/ssl.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/ssl.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,62 +0,0 @@
-===========
-Secure HTTP
-===========
-
-------------
-Module: core
-------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:44:53 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- How to set up SSL in lighttpd
-
-.. meta::
- :keywords: lighttpd, ssl
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-lighttpd supports SSLv2 and SSLv3 if it is compiled against openssl.
-
-Configuration
--------------
-
-To enable SSL for the whole server you have to provide a valid
-certificate and have to enable the SSL engine.::
-
- ssl.engine = "enable"
- ssl.pemfile = "/path/to/server.pem"
-
-The HTTPS protocol does not allow you to use name-based virtual
-hosting with SSL. If you want to run multiple SSL servers with
-one lighttpd instance you must use IP-based virtual hosting: ::
-
- $SERVER["socket"] == "10.0.0.1:443" {
- ssl.engine = "enable"
- ssl.pemfile = "www.example.org.pem"
- server.name = "www.example.org"
-
- server.document-root = "/www/servers/www.example.org/pages/"
- }
-
-If you have a .crt and a .key file, cat them together into a
-single PEM file:
-::
-
- $ cat host.key host.crt > host.pem
-
-
-Self-Signed Certificates
-------------------------
-
-A self-signed SSL certificate can be generated like this: ::
-
- $ openssl req -new -x509 \
- -keyout server.pem -out server.pem \
- -days 365 -nodes
-
Deleted: lighttpd/trunk/doc/state.dot
===================================================================
--- lighttpd/trunk/doc/state.dot 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/state.dot 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,18 +0,0 @@
-digraph state {
- edge [color=green];
- connect -> reqstart -> read -> reqend -> handlereq -> respstart -> write -> respend -> connect;
- edge [color=grey];
- reqend -> readpost -> handlereq [ label="POST" ];
- edge [ color=blue]
- respend -> reqstart [ label="keep-alive" ];
- edge [ color=lightblue]
- handlereq -> handlereq [ label="sub-request" ];
- edge [style=dashed, color=red];
- error -> close -> connect;
- error -> connect;
- handlereq -> error;
- read -> error;
- readpost -> error;
- write -> error;
- connect [shape=box];
-}
Deleted: lighttpd/trunk/doc/state.txt
===================================================================
--- lighttpd/trunk/doc/state.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/state.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,170 +0,0 @@
-============================
-The State Engine of lighttpd
-============================
-
-------------
-Module: core
-------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/01 07:01:29 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- This is a short summary of the state-engine which is driving the lighttpd
- webserver. It describes the basic concepts and the way the different parts
- of the server are connected.
-
-.. meta::
- :keywords: lighttpd, state-engine
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-States
-------
-
-The state-engine is currently made of 11 states which are walk-through on
-the way each connection. Some of them are specific for a special operation
-and some may never be hit at all.
-
-:connect:
- waiting for a connection
-:reqstart:
- init the read-idle timer
-:read:
- read http-request-header from network
-:reqend:
- parse request
-:readpost:
- read http-request-content from network
-:handlereq:
- handle the request internally (might result in sub-requests)
-:respstart:
- prepare response header
-:write:
- write response-header + content to network
-:respend:
- cleanup environment, log request
-:error:
- reset connection (incl. close())
-:close:
- close connection (handle lingering close)
-
-.. image:: state.png
-
-A simple GET request (green path)
----------------------------------
-
-The connection is idling in the 'connect' state waiting for a connection.
-As soon as the connection is set up we init the read-timer in 'reqstart'
-and start to read data from the network. As soon as we get the
-HTTP-request terminator (CRLFCRLF) we forward the header to the parser.
-
-The parsed request is handled by 'handlereq' and as soon as a decision out
-the request is made it is sent to 'respstart' to prepare the
-HTTP-response header. In the 'write' state the prepare content is sent out
-to the network. When everything is sent 'respend' is entered to log the
-request and cleanup the environment. After the close() call the connection
-is set back to the 'connect' state again.
-
-Keep-Alive (blue path)
-----------------------
-
-The Keep-Alive handling is implemented by going from the 'respend'
-directly to 'reqstart' without the close() and the accept() calls.
-
-POST requests (grey path)
--------------------------
-
-As requests might contain a request-body the state 'readpost' entered as
-soon as the header is parsed and we know how much data we expect.
-
-Pipelining
-----------
-
-HTTP/1.1 supportes pipelining (sending multiple requests without waiting
-for the response of the first request). This is handled transparently by
-the 'read' state.
-
-Unexpected errors (red path)
-----------------------------
-
-For really hard errors we use the 'error' state which resets the
-connection and can be call from every state. It is only use if there is no
-other way to handle the issue (e.g. client-side close of the connection).
-If possible we should use http-status 500 ('internal server error') and
-log the issue in the errorlog.
-
-If we have to take care of some data which is coming in after we ran into
-the error condition the 'close' state is used the init a half-close and
-read all the delay packet from the network.
-
-Sub-Requests (lightblue)
-------------------------
-
-The FastCGI, CGI, ... intergration is done by introducing a loop in
-'handlereq' to handle all aspect which are neccesary to find out what has
-to be sent back to the client.
-
-Functions
-=========
-
-Important functions used by the state-engine
-
-:state-engine:
-
-- ``connection_state_machine()``
-
-:connect:
-
-- (nothing)
-
-:reqstart:
-
-- (nothing)
-
-:read:
-
-- ``connection_handle_read_state()``
-- ``connection_handle_read()``
-
-:reqend:
-
-- ``http_request_parse()``
-
-:readpost:
-
-- ``connection_handle_read_state()``
-- ``connection_handle_read()``
-
-:handlereq:
-
-- ``http_response_prepare()``
-
-:respstart:
-
-- ``connection_handle_write_prepare()``
-
-:write:
-
-- ``connection_handle_write()``
-
-:respend:
-
-- ``plugins_call_handle_request_done()``
-- ``plugins_call_handle_connection_close()``
-- ``connection_close()`` (if not keep-alive)
-- ``connection_reset()``
-
-:error:
-
-- ``plugins_call_handle_request_done()``
-- ``plugins_call_handle_connection_close()``
-- ``connection_reset()``
-
-:close:
-
-- ``connection_close()``
Deleted: lighttpd/trunk/doc/status.txt
===================================================================
--- lighttpd/trunk/doc/status.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/status.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,111 +0,0 @@
-=============
-Server Status
-=============
-
-------------------
-Module: mod_status
-------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- mod_status displays the server's status and configuration
-
-.. meta::
- :keywords: lighttpd, server status
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-The server status module generates the status overview of the webserver. The
-information covers:
-
-- uptime
-- average throughput
-- current throughput
-- active connections and their state
-
-
-We need to load the module first. ::
-
- server.modules = ( ..., "mod_ssi", ... )
-
-By default the status page is disabled to hide internal information from
-unauthorized users. ::
-
- status.status-url = "/server-status"
-
-If you want to open the status page just for users from the local network
-cover it in a conditional. ::
-
- $HTTP["remoteip"] == "10.0.0.0/8" {
- status.status-url = "/server-status"
- }
-
-Or require authorization: ::
-
- auth.require = ( "/server-status" =>
- ( "realm" ... ) )
-
-
-Please note that when using the server.max-worker directive, the stati of the
-childs are not combined yet, so you're going to see different stats with each
-request.
-
-
-Output Format
--------------
-
-By default a nice looking HTML page is generated. If you append ?auto to the
-status-url you can get a text version which is simpler to parse. ::
-
- Total Accesses: 1234
- Total kBytes: 1043
- Uptime: 1234
- BusyServers: 123
-
-Total Accesses is the number of handled requests, kBytes the overall outgoing
-traffic, Uptime the uptime in seconds and BusyServers the number of currently
-active connections.
-
-The naming is kept compatible to Apache even if we have another concept and
-don't start new servers for each connection.
-
-
-Options
-=======
-
-status.status-url
-
- relative URL which is used to retrieve the status-page
-
- Default: unset
-
- Example: status.status-url = "/server-status"
-
-status.enable-sort
-
- add JavaScript which allows client-side sorting for the connection overview
-
- Default: enable
-
-status.config-url
-
- relative URL for the config page which displays the loaded modules
-
- Default: unset
-
- Example: status.config-url = "/server-config"
-
-status.statistics-url
-
- relative URL for a plain-text page containing the internal statistics
-
- Default: unset
-
- Example: status.statistics-url = "/server-statistics"
-
Deleted: lighttpd/trunk/doc/traffic-shaping.txt
===================================================================
--- lighttpd/trunk/doc/traffic-shaping.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/traffic-shaping.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,55 +0,0 @@
-===============
-Traffic Shaping
-===============
-
-------------
-Module: core
-------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- limiting bandwidth usage
-
-.. meta::
- :keywords: lighttpd, bandwidth limit, traffic shaping
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Starting with 1.3.8, lighttpd supports limiting the bandwidth for
-a single connection or config context like a virtual host or a URL.
-
-Options
-=======
-
-:connection.kbytes-per-second:
- limit the throughput for each single connection to the given
- limit in kbyte/s
-
- default: 0 (no limit)
-
-:server.kbytes-per-second:
- limit the throughput for all connections to the given limit
- in kbyte/s
-
- if you want to specify a limit for a special virtual server
- use: ::
-
- $HTTP["host"] == "www.example.org" {
- server.kbytes-per-second = 128
- }
-
- which will override the default for this host.
-
- default: 0 (no limit)
-
-Additional Notes
-================
-
-Keep in mind that a limit below 32kb/s might actually limit the traffic to 32kb/s. This
-is caused by the size of the TCP send buffer.
Deleted: lighttpd/trunk/doc/trigger_b4_dl.txt
===================================================================
--- lighttpd/trunk/doc/trigger_b4_dl.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/trigger_b4_dl.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,57 +0,0 @@
-=======================
-Trigger before Download
-=======================
-
--------------------------
-Module: mod_trigger_b4_dl
--------------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- another anti-hot-linking module
-
-.. meta::
- :keywords: lighttpd, hot-linking, deep-linking
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-Anti Hotlinking:
-
- * if user requests ''download-url'' directly, the request is denied and he is redirected to ''deny-url'
- * if user visits ''trigger-url'' before requesting ''download-url'', access is granted
- * if user visits ''download-url'' again after ''trigger-timeout'' has elapsed, the request is denied and he is redirected to ''deny-url''
-
-The trigger information is either stored locally in a gdbm file or remotely in memcached.
-
-Requirements
-------------
-
- * libpcre
- * libgdbm or libmemcache
-
-Options
-=======
-
-::
-
- trigger-before-download.gdbm-filename = "/home/weigon/testbase/trigger.db"
- trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
- trigger-before-download.trigger-url = "^/trigger/"
- trigger-before-download.download-url = "^/download/"
- trigger-before-download.deny-url = "http://192.168.1.5:1025/index.html"
- trigger-before-download.trigger-timeout = 10
-
-If both trigger-before-download.gdbm-filename and
-trigger-before-download.memcache-hosts is set gdbm will take precedence.
-
-Installation
-============
-
-memcached should be started with the option -M as we don't want to remove entry if the memory is full.
-
Deleted: lighttpd/trunk/doc/userdir.txt
===================================================================
--- lighttpd/trunk/doc/userdir.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/userdir.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,72 +0,0 @@
-=======
-userdir
-=======
-
--------------------
-Module: mod_userdir
--------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/08/29 09:43:49 $
-:Revision: $Revision: 1.1 $
-
-:abstract:
- The userdir module ...
-
-.. meta::
- :keywords: lighttpd, userdir
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-The userdir module provides a simple way to link user-based directories into the global namespace of the webserver.
-
-Requests in the form ``/~user/page.html`` are rewritten to take the file ``page.html`` from the home directory of the user.
-If ``userdir.path`` is set, the path will be appended to the home directory
-building the classic mapping of: ::
-
- userdir.path = "public_html"
-
- URL: http://www.example.org/~jan/index.html
- Path: /home/jan/public_html/
-
-To control which users should be able to use this feature you can set a list of usernames to include or exclude.
-
-In case your mapping is independent of /etc/passwd you can use
-``userdir.basepath``: ::
-
- userdir.path = "htdocs"
- userdir.basepath = "/var/www/users/"
-
- URL: http://www.example.org/~jan/index.html
- Path: /var/www/users/jan/htdocs/index.html
-
-Options
-=======
-
-userdir.path (required option)
- usually it should be set to "public_html" to take ~/public_html/ as the document root
-
- Default: unset (mod_userdir disabled; set it to "" if you want the home directory to be the document root as it was the default before 1.4.19)
- Example: ::
-
- userdir.path = "public_html"
-
-userdir.exclude-user
- list of usernames which may not use this feature
-
- Default: empty (all users may use it)
- Example: ::
-
- userdir.exclude-user = ( "root", "postmaster" )
-
-
-userdir.include-user
- if set, only users from this list may use the feature
-
- Default: empty (all users may use it)
-
-userdir.basepath
- if set, don't check /etc/passwd for homedir
Deleted: lighttpd/trunk/doc/webdav.txt
===================================================================
--- lighttpd/trunk/doc/webdav.txt 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/doc/webdav.txt 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,64 +0,0 @@
-======
-WebDAV
-======
-
---------------------
-Module: mod_webdav
---------------------
-
-:Author: Jan Kneschke
-:Date: $Date: 2004/11/03 22:26:05 $
-:Revision: $Revision: 1.2 $
-
-:abstract:
- WebDAV module for lighttpd
-
-.. meta::
- :keywords: lighttpd, webdav
-
-.. contents:: Table of Contents
-
-Description
-===========
-
-The WebDAV module is a very minimalistic implementation of RFC 2518.
-Minimalistic means that not all operations are implemented yet.
-
-So far we have
-
- * PROPFIND
- * OPTIONS
- * MKCOL
- * DELETE
- * PUT
-
-and the usual GET, POST, HEAD from HTTP/1.1.
-
-So far, mounting a WebDAV resource into Windows XP works and the basic litmus
-tests are passed.
-
-Options
-=======
-
-webdav.activate
- If you load the webdav module, the WebDAV functionality has to be
- enabled for the directories you want to provide to the user.
-
- Default: disable
-
-webdav.is-readonly
- Only allow reading methods (GET, PROPFIND, OPTIONS) on WebDAV resources.
-
- Default: writable
-
-Examples
-========
-
-To enable WebDAV for the /dav directory, you wrap your webdav options in
-a conditional. You have to use the regex like below as you want to match
-the directory /dav and everything below it, but not e.g. /davos. ::
-
- $HTTP["url"] =~ "^/dav($|/)" {
- webdav.activate = "enable"
- webdav.is-readonly = "enable"
- }
Modified: lighttpd/trunk/ltmain.sh
===================================================================
--- lighttpd/trunk/ltmain.sh 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/ltmain.sh 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,9 +1,9 @@
-# Generated from ltmain.m4sh.
-# ltmain.sh (GNU libtool) 2.2.6b
+# libtool (GNU libtool) 2.4
# Written by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
@@ -32,50 +32,56 @@
#
# Provide generalized library-building support services.
#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print informational messages (default)
-# --version print version information
-# -h, --help print short or long help message
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
#
# MODE must be one of the following:
#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
#
-# MODE-ARGS vary depending on the MODE.
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
#
# When reporting a bug, please describe a test case to reproduce it and
# include the following information:
#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2
-# automake: $automake_version
-# autoconf: $autoconf_version
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4 Debian-2.4-2
+# automake: $automake_version
+# autoconf: $autoconf_version
#
# Report bugs to <bug-libtool at gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
-PROGRAM=ltmain.sh
+PROGRAM=libtool
PACKAGE=libtool
-VERSION="2.2.6b Debian-2.2.6b-2"
+VERSION="2.4 Debian-2.4-2"
TIMESTAMP=""
-package_revision=1.3017
+package_revision=1.3293
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -91,10 +97,15 @@
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
# NLS nuisances: We save the old values to restore during execute mode.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
lt_user_locale=
lt_safe_locale=
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -107,15 +118,24 @@
lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
fi"
done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
$lt_unset CDPATH
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
: ${CP="cp -f"}
-: ${ECHO="echo"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
: ${EGREP="/bin/grep -E"}
: ${FGREP="/bin/grep -F"}
: ${GREP="/bin/grep"}
@@ -144,6 +164,27 @@
dirname="s,/[^/]*$,,"
basename="s,^.*/,,"
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
# func_dirname_and_basename file append nondir_replacement
# perform func_basename and func_dirname in a single function
# call:
@@ -158,33 +199,183 @@
# those functions but instead duplicate the functionality here.
func_dirname_and_basename ()
{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}
-# Generated shell functions inserted here.
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
# The name of this program:
-# In the unlikely event $progname began with a '-', it would play havoc with
-# func_echo (imagine progname=-n), so we prepend ./ in that case:
func_dirname_and_basename "$progpath"
progname=$func_basename_result
-case $progname in
- -*) progname=./$progname ;;
-esac
# Make sure we have an absolute path for reexecution:
case $progpath in
@@ -215,6 +406,15 @@
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
# Re-`\' parameter expansions in output of double_quote_subst that were
# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
# in input to double_quote_subst, that '$' was protected from expansion.
@@ -243,7 +443,7 @@
# name if it has been set yet.
func_echo ()
{
- $ECHO "$progname${mode+: }$mode: $*"
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
}
# func_verbose arg...
@@ -258,18 +458,25 @@
:
}
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
# func_error arg...
# Echo program name prefixed message to standard error.
func_error ()
{
- $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
}
# func_warning arg...
# Echo program name prefixed warning message to standard error.
func_warning ()
{
- $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
# bash bug again:
:
@@ -326,9 +533,9 @@
case $my_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
done
- my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
save_mkdir_p_IFS="$IFS"; IFS=':'
for my_dir in $my_dir_list; do
@@ -378,7 +585,7 @@
func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
fi
- $ECHO "X$my_tmpdir" | $Xsed
+ $ECHO "$my_tmpdir"
}
@@ -392,7 +599,7 @@
{
case $1 in
*[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
*)
func_quote_for_eval_unquoted_result="$1" ;;
esac
@@ -419,7 +626,7 @@
{
case $1 in
*[\\\`\"]*)
- my_arg=`$ECHO "X$1" | $Xsed \
+ my_arg=`$ECHO "$1" | $SED \
-e "$double_quote_subst" -e "$sed_double_backslash"` ;;
*)
my_arg="$1" ;;
@@ -488,15 +695,39 @@
fi
}
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
-
-
# func_version
# Echo version message to standard output and exit.
func_version ()
{
- $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
s/^# //
s/^# *$//
s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -509,22 +740,28 @@
# Echo short help message to standard output and exit.
func_usage ()
{
- $SED -n '/^# Usage:/,/# -h/ {
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
s/^# //
s/^# *$//
s/\$progname/'$progname'/
p
}' < "$progpath"
- $ECHO
+ echo
$ECHO "run \`$progname --help | more' for full usage"
exit $?
}
-# func_help
-# Echo long help message to standard output and exit.
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
func_help ()
{
+ $opt_debug
+
$SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
s/^# //
s/^# *$//
s*\$progname*'$progname'*
@@ -537,8 +774,15 @@
s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
p
- }' < "$progpath"
- exit $?
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
}
# func_missing_arg argname
@@ -546,63 +790,106 @@
# exit_cmd.
func_missing_arg ()
{
- func_error "missing argument for $1"
+ $opt_debug
+
+ func_error "missing argument for $1."
exit_cmd=exit
}
-exit_cmd=:
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
-# Check that we have a working $ECHO.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
- # Yippee, $ECHO works!
- :
-else
- # Restart under the correct shell, and then maybe $ECHO will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
+exit_cmd=:
+
+
+
+
magic="%%%MAGIC variable%%%"
magic_exe="%%%MAGIC EXE variable%%%"
# Global variables.
-# $mode is unset
nonopt=
-execute_dlfiles=
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
extracted_archives=
extracted_serial=0
-opt_dry_run=false
-opt_duplicate_deps=false
-opt_silent=false
-opt_debug=:
-
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
exec_cmd=
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
# func_fatal_configuration arg...
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
@@ -636,16 +923,16 @@
# Display the features supported by this script.
func_features ()
{
- $ECHO "host: $host"
+ echo "host: $host"
if test "$build_libtool_libs" = yes; then
- $ECHO "enable shared libraries"
+ echo "enable shared libraries"
else
- $ECHO "disable shared libraries"
+ echo "disable shared libraries"
fi
if test "$build_old_libs" = yes; then
- $ECHO "enable static libraries"
+ echo "enable static libraries"
else
- $ECHO "disable static libraries"
+ echo "disable static libraries"
fi
exit $?
@@ -692,201 +979,250 @@
esac
}
-# Parse options once, thoroughly. This comes as soon as possible in
-# the script to make things like `libtool --version' happen quickly.
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
- # Shorthand for --mode=foo, only valid as the first argument
- case $1 in
- clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
- compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
- execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
- finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
- install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
- link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
- uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
- esac
+ exit $EXIT_MISMATCH
+ fi
+}
- # Parse non-mode specific arguments:
- while test "$#" -gt 0; do
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
opt="$1"
shift
-
case $opt in
- --config) func_config ;;
-
- --debug) preserve_args="$preserve_args $opt"
+ --debug|-x) opt_debug='set -x'
func_echo "enabling shell trace mode"
- opt_debug='set -x'
$opt_debug
;;
-
- -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
- execute_dlfiles="$execute_dlfiles $1"
- shift
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
;;
-
- --dry-run | -n) opt_dry_run=: ;;
- --features) func_features ;;
- --finish) mode="finish" ;;
-
- --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
- case $1 in
- # Valid mode arguments:
- clean) ;;
- compile) ;;
- execute) ;;
- finish) ;;
- install) ;;
- link) ;;
- relink) ;;
- uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
- esac
-
- mode="$1"
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
shift
;;
-
--preserve-dup-deps)
- opt_duplicate_deps=: ;;
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
- --quiet|--silent) preserve_args="$preserve_args $opt"
- opt_silent=:
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
;;
-
- --verbose| -v) preserve_args="$preserve_args $opt"
+ --no-silent|--no-quiet)
opt_silent=false
+func_append preserve_args " $opt"
;;
-
- --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
- preserve_args="$preserve_args $opt $1"
- func_enable_tag "$1" # tagname is set here
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
shift
;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
# Separate optargs to long options:
- -dlopen=*|--mode=*|--tag=*)
- func_opt_split "$opt"
- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
shift
;;
- -\?|-h) func_usage ;;
- --help) opt_help=: ;;
- --version) func_version ;;
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
-
- *) nonopt="$opt"
- break
- ;;
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
esac
done
+ # Validate options:
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
case $host in
*cygwin* | *mingw* | *pw32* | *cegcc*)
# don't eliminate duplications in $postdeps and $predeps
opt_duplicate_compiler_generated_deps=:
;;
*)
- opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
;;
esac
- # Having warned about all mis-specified options, bail out if
- # anything was wrong.
- $exit_cmd $EXIT_FAILURE
-}
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
fi
- exit $EXIT_MISMATCH
- fi
-}
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
-## ----------- ##
-## Main. ##
-## ----------- ##
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
-$opt_help || {
- # Sanity checks first:
- func_check_version_match
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
- fi
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
- test -z "$mode" && func_fatal_error "error: you must specify a MODE."
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
+## ----------- ##
+## Main. ##
+## ----------- ##
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$mode' for more information."
-}
-
-
# func_lalib_p file
# True iff FILE is a libtool `.la' library or `.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
@@ -950,12 +1286,9 @@
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
- func_ltwrapper_scriptname_result=""
- if func_ltwrapper_executable_p "$1"; then
- func_dirname_and_basename "$1" "" "."
- func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
- fi
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
}
# func_ltwrapper_p file
@@ -1001,6 +1334,37 @@
}
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
@@ -1013,13 +1377,15 @@
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
- func_quote_for_eval "$arg"
- CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ func_append_quoted CC_quoted "$arg"
done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
@@ -1030,11 +1396,13 @@
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
- func_quote_for_eval "$arg"
- CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ func_append_quoted CC_quoted "$arg"
done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
case "$@ " in
- " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
@@ -1097,6 +1465,486 @@
}
}
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
# func_mode_compile arg...
func_mode_compile ()
{
@@ -1137,12 +1985,12 @@
;;
-pie | -fpie | -fPIE)
- pie_flag="$pie_flag $arg"
+ func_append pie_flag " $arg"
continue
;;
-shared | -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
+ func_append later " $arg"
continue
;;
@@ -1163,15 +2011,14 @@
save_ifs="$IFS"; IFS=','
for arg in $args; do
IFS="$save_ifs"
- func_quote_for_eval "$arg"
- lastarg="$lastarg $func_quote_for_eval_result"
+ func_append_quoted lastarg "$arg"
done
IFS="$save_ifs"
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
+ func_append base_compile " $lastarg"
continue
;;
@@ -1187,8 +2034,7 @@
esac # case $arg_mode
# Aesthetically quote the previous argument.
- func_quote_for_eval "$lastarg"
- base_compile="$base_compile $func_quote_for_eval_result"
+ func_append_quoted base_compile "$lastarg"
done # for arg
case $arg_mode in
@@ -1213,7 +2059,7 @@
*.[cCFSifmso] | \
*.ada | *.adb | *.ads | *.asm | \
*.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
- *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
func_xform "$libobj"
libobj=$func_xform_result
;;
@@ -1288,7 +2134,7 @@
# Calculate the filename of the output object if compiler does
# not support -o with -c
if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
else
output_obj=
@@ -1319,17 +2165,16 @@
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
- removelist="$removelist $output_obj"
+ func_append removelist " $output_obj"
$ECHO "$srcfile" > "$lockfile"
fi
$opt_dry_run || $RM $removelist
- removelist="$removelist $lockfile"
+ func_append removelist " $lockfile"
trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
func_quote_for_eval "$srcfile"
qsrcfile=$func_quote_for_eval_result
@@ -1349,7 +2194,7 @@
if test -z "$output_obj"; then
# Place PIC objects in $objdir
- command="$command -o $lobj"
+ func_append command " -o $lobj"
fi
func_show_eval_locale "$command" \
@@ -1396,11 +2241,11 @@
command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
+ func_append command " -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
+ func_append command "$suppress_output"
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
@@ -1445,13 +2290,13 @@
}
$opt_help || {
-test "$mode" = compile && func_mode_compile ${1+"$@"}
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
}
func_mode_help ()
{
# We need to display help for each of the modes.
- case $mode in
+ case $opt_mode in
"")
# Generic help is extracted from the usage comments
# at the start of this file.
@@ -1482,10 +2327,11 @@
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
-no-suppress do not suppress compiler output for multiple passes
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
-shared do not build a \`.o' file suitable for static linking
-static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
from the given SOURCEFILE.
@@ -1538,7 +2384,7 @@
The following components of INSTALL-COMMAND are treated specially:
- -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
@@ -1558,6 +2404,8 @@
-all-static do not do any dynamic linking at all
-avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
-dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -1586,6 +2434,11 @@
-version-info CURRENT[:REVISION[:AGE]]
specify library version info [each variable defaults to 0]
-weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
All other options (arguments beginning with \`-') are ignored.
@@ -1619,18 +2472,44 @@
;;
*)
- func_fatal_help "invalid operation mode \`$mode'"
+ func_fatal_help "invalid operation mode \`$opt_mode'"
;;
esac
- $ECHO
+ echo
$ECHO "Try \`$progname --help' for more information about other modes."
-
- exit $?
}
- # Now that we've collected a possible --mode arg, show help if necessary
- $opt_help && func_mode_help
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
# func_mode_execute arg...
@@ -1643,13 +2522,16 @@
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
+ for file in $opt_dlopen; do
test -f "$file" \
|| func_fatal_help "\`$file' is not a file"
dir=
case $file in
*.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "\`$lib' is not a valid libtool archive"
@@ -1671,7 +2553,7 @@
dir="$func_dirname_result"
if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
+ func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
@@ -1712,7 +2594,7 @@
for file
do
case $file in
- -*) ;;
+ -* | *.la | *.lo ) ;;
*)
# Do a test to see if this is really a libtool program.
if func_ltwrapper_script_p "$file"; then
@@ -1728,8 +2610,7 @@
;;
esac
# Quote arguments (to preserve shell metacharacters).
- func_quote_for_eval "$file"
- args="$args $func_quote_for_eval_result"
+ func_append_quoted args "$file"
done
if test "X$opt_dry_run" = Xfalse; then
@@ -1754,29 +2635,66 @@
# Display what would be done.
if test -n "$shlibpath_var"; then
eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- $ECHO "export $shlibpath_var"
+ echo "export $shlibpath_var"
fi
$ECHO "$cmd$args"
exit $EXIT_SUCCESS
fi
}
-test "$mode" = execute && func_mode_execute ${1+"$@"}
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
$opt_debug
- libdirs="$nonopt"
+ libs=
+ libdirs=
admincmds=
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
@@ -1786,7 +2704,7 @@
if test -n "$finish_eval"; then
# Do the single finish_eval.
eval cmds=\"$finish_eval\"
- $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
$cmds"
fi
done
@@ -1795,53 +2713,55 @@
# Exit here if they wanted silent mode.
$opt_silent && exit $EXIT_SUCCESS
- $ECHO "X----------------------------------------------------------------------" | $Xsed
- $ECHO "Libraries have been installed in:"
- for libdir in $libdirs; do
- $ECHO " $libdir"
- done
- $ECHO
- $ECHO "If you ever happen to want to link against installed libraries"
- $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
- $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $ECHO "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $ECHO " during execution"
- fi
- if test -n "$runpath_var"; then
- $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
- $ECHO " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
- $ECHO " - use the \`$flag' linker flag"
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
fi
- if test -n "$admincmds"; then
- $ECHO " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- $ECHO
-
- $ECHO "See any operating system documentation about shared libraries for"
- case $host in
- solaris2.[6789]|solaris2.1[0-9])
- $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
- $ECHO "pages."
- ;;
- *)
- $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
- ;;
- esac
- $ECHO "X----------------------------------------------------------------------" | $Xsed
exit $EXIT_SUCCESS
}
-test "$mode" = finish && func_mode_finish ${1+"$@"}
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
# func_mode_install arg...
@@ -1852,7 +2772,7 @@
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
- $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+ case $nonopt in *shtool*) :;; *) false;; esac; then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
@@ -1866,7 +2786,12 @@
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
func_quote_for_eval "$arg"
- install_prog="$install_prog$func_quote_for_eval_result"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
# We need to accept at least all the BSD install flags.
dest=
@@ -1876,10 +2801,12 @@
install_type=
isdir=no
stripme=
+ no_mode=:
for arg
do
+ arg2=
if test -n "$dest"; then
- files="$files $dest"
+ func_append files " $dest"
dest=$arg
continue
fi
@@ -1887,10 +2814,9 @@
case $arg in
-d) isdir=yes ;;
-f)
- case " $install_prog " in
- *[\\\ /]cp\ *) ;;
- *) prev=$arg ;;
- esac
+ if $install_cp; then :; else
+ prev=$arg
+ fi
;;
-g | -m | -o)
prev=$arg
@@ -1904,6 +2830,10 @@
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
prev=
else
dest=$arg
@@ -1914,7 +2844,11 @@
# Aesthetically quote the argument.
func_quote_for_eval "$arg"
- install_prog="$install_prog $func_quote_for_eval_result"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
done
test -z "$install_prog" && \
@@ -1923,6 +2857,13 @@
test -n "$prev" && \
func_fatal_help "the \`$prev' option requires an argument"
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
if test -z "$files"; then
if test -z "$dest"; then
func_fatal_help "no file or destination specified"
@@ -1977,10 +2918,13 @@
case $file in
*.$libext)
# Do the static libraries later.
- staticlibs="$staticlibs $file"
+ func_append staticlibs " $file"
;;
*.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "\`$file' is not a valid libtool archive"
@@ -1994,23 +2938,23 @@
if test "X$destdir" = "X$libdir"; then
case "$current_libdirs " in
*" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
+ *) func_append current_libdirs " $libdir" ;;
esac
else
# Note the libdir as a future libdir.
case "$future_libdirs " in
*" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
+ *) func_append future_libdirs " $libdir" ;;
esac
fi
func_dirname "$file" "/" ""
dir="$func_dirname_result"
- dir="$dir$objdir"
+ func_append dir "$objdir"
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
# Don't allow the user to place us outside of our expected
# location b/c this prevents finding dependent libraries that
@@ -2023,9 +2967,9 @@
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
else
- relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
func_warning "relinking \`$file'"
@@ -2043,7 +2987,7 @@
test -n "$relink_command" && srcname="$realname"T
# Install the shared library and build the symlinks.
- func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
tstripme="$stripme"
case $host_os in
@@ -2083,7 +3027,7 @@
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
;;
*.lo)
@@ -2183,7 +3127,7 @@
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
if test -n "$libdir" && test ! -f "$libfile"; then
func_warning "\`$lib' has not been installed in \`$libdir'"
finalize=no
@@ -2202,7 +3146,7 @@
file="$func_basename_result"
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
$opt_silent || {
func_quote_for_expand "$relink_command"
@@ -2221,7 +3165,7 @@
}
else
# Install the binary that we compiled earlier.
- file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
fi
fi
@@ -2280,7 +3224,7 @@
fi
}
-test "$mode" = install && func_mode_install ${1+"$@"}
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
@@ -2323,6 +3267,22 @@
extern \"C\" {
#endif
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
/* External symbol declarations for the compiler. */\
"
@@ -2332,10 +3292,11 @@
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
- progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
- func_verbose "extracting global C symbols from \`$progfile'"
- $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
if test -n "$exclude_expsyms"; then
@@ -2371,7 +3332,7 @@
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
- *cygwin | *mingw* | *cegcc* )
+ *cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
;;
@@ -2384,10 +3345,52 @@
func_verbose "extracting global C symbols from \`$dlprefile'"
func_basename "$dlprefile"
name="$func_basename_result"
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
done
$opt_dry_run || {
@@ -2415,36 +3418,19 @@
if test -f "$nlist"S; then
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
else
- $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
- $ECHO >> "$output_objdir/$my_dlsyms" "\
+ echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
typedef struct {
const char *name;
void *address;
} lt_dlsymlist;
-"
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- $ECHO >> "$output_objdir/$my_dlsyms" "\
-/* DATA imports from DLLs on WIN32 con't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs. */"
- lt_dlsym_const= ;;
- *osf5*)
- echo >> "$output_objdir/$my_dlsyms" "\
-/* This system does not cope well with relocations in const data */"
- lt_dlsym_const= ;;
- *)
- lt_dlsym_const=const ;;
- esac
-
- $ECHO >> "$output_objdir/$my_dlsyms" "\
-extern $lt_dlsym_const lt_dlsymlist
+extern LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[];
-$lt_dlsym_const lt_dlsymlist
+LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
{\
{ \"$my_originator\", (void *) 0 },"
@@ -2457,7 +3443,7 @@
eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
esac
- $ECHO >> "$output_objdir/$my_dlsyms" "\
+ echo >> "$output_objdir/$my_dlsyms" "\
{0, (void *) 0}
};
@@ -2500,7 +3486,7 @@
for arg in $LTCFLAGS; do
case $arg in
-pie | -fpie | -fPIE) ;;
- *) symtab_cflags="$symtab_cflags $arg" ;;
+ *) func_append symtab_cflags " $arg" ;;
esac
done
@@ -2515,16 +3501,16 @@
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
else
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
fi
;;
*)
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
;;
esac
;;
@@ -2538,8 +3524,8 @@
# really was required.
# Nullify the symbol file.
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
fi
}
@@ -2549,6 +3535,7 @@
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
$opt_debug
@@ -2559,9 +3546,11 @@
win32_libid_type="x86 archive import"
;;
*ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
- $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
$SED -n -e '
1,100{
/ I /{
@@ -2590,15 +3579,151 @@
$ECHO "$win32_libid_type"
}
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
$opt_debug
f_ex_an_ar_dir="$1"; shift
f_ex_an_ar_oldlib="$1"
- func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
@@ -2669,7 +3794,7 @@
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
$LIPO -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
$RM -rf unfat-$$
@@ -2684,25 +3809,30 @@
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
func_extract_archives_result="$my_oldobjs"
}
-
-# func_emit_wrapper_part1 [arg=no]
+# func_emit_wrapper [arg=no]
#
-# Emit the first part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part1 ()
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
{
- func_emit_wrapper_part1_arg1=no
- if test -n "$1" ; then
- func_emit_wrapper_part1_arg1=$1
- fi
+ func_emit_wrapper_arg1=${1-no}
$ECHO "\
#! $SHELL
@@ -2718,7 +3848,6 @@
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
# Be Bourne compatible
@@ -2749,31 +3878,132 @@
else
# When we are sourced in execute mode, \$file and \$ECHO are already set.
if test \"\$libtool_execute_magic\" != \"$magic\"; then
- ECHO=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$ECHO works!
- :
- else
- # Restart under the correct shell, and then maybe \$ECHO will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
"
- $ECHO "\
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
# Find the directory that this script lives in.
- thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
while test -n \"\$file\"; do
- destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
@@ -2783,30 +4013,13 @@
esac
fi
- file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
done
-"
-}
-# end: func_emit_wrapper_part1
-# func_emit_wrapper_part2 [arg=no]
-#
-# Emit the second part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part2 ()
-{
- func_emit_wrapper_part2_arg1=no
- if test -n "$1" ; then
- func_emit_wrapper_part2_arg1=$1
- fi
-
- $ECHO "\
-
# Usually 'no', except on cygwin/mingw when embedded into
# the cwrapper.
- WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
# special case for '.'
if test \"\$thisdir\" = \".\"; then
@@ -2814,7 +4027,7 @@
fi
# remove .libs from thisdir
case \"\$thisdir\" in
- *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
$objdir ) thisdir=. ;;
esac
fi
@@ -2869,6 +4082,18 @@
if test -f \"\$progdir/\$program\"; then"
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
# Export our shlibpath_var if we have one.
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
@@ -2877,254 +4102,29 @@
# Some systems cannot cope with colon-terminated $shlibpath_var
# The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
export $shlibpath_var
"
fi
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $ECHO "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
$ECHO "\
if test \"\$libtool_execute_magic\" != \"$magic\"; then
# Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2* | *-cegcc*)
- $ECHO "\
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $ECHO "\
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
- esac
- $ECHO "\
- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
- exit 1
+ func_exec_program \${1+\"\$@\"}
fi
else
# The program doesn't exist.
\$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
- $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
fi
fi\
"
}
-# end: func_emit_wrapper_part2
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable. Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory. This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
- func_emit_wrapper_arg1=no
- if test -n "$1" ; then
- func_emit_wrapper_arg1=$1
- fi
-
- # split this up so that func_emit_cwrapperexe_src
- # can call each part independently.
- func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
- func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-}
-
-
-# func_to_host_path arg
-#
-# Convert paths to host format when used with build tools.
-# Intended for use with "native" mingw (where libtool itself
-# is running under the msys shell), or in the following cross-
-# build environments:
-# $build $host
-# mingw (msys) mingw [e.g. native]
-# cygwin mingw
-# *nix + wine mingw
-# where wine is equipped with the `winepath' executable.
-# In the native mingw case, the (msys) shell automatically
-# converts paths for any non-msys applications it launches,
-# but that facility isn't available from inside the cwrapper.
-# Similar accommodations are necessary for $host mingw and
-# $build cygwin. Calling this function does no harm for other
-# $host/$build combinations not listed above.
-#
-# ARG is the path (on $build) that should be converted to
-# the proper representation for $host. The result is stored
-# in $func_to_host_path_result.
-func_to_host_path ()
-{
- func_to_host_path_result="$1"
- if test -n "$1" ; then
- case $host in
- *mingw* )
- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
- case $build in
- *mingw* ) # actually, msys
- # awkward: cmd appends spaces to result
- lt_sed_strip_trailing_spaces="s/[ ]*\$//"
- func_to_host_path_tmp1=`( cmd //c echo "$1" |\
- $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
- $SED -e "$lt_sed_naive_backslashify"`
- ;;
- *cygwin* )
- func_to_host_path_tmp1=`cygpath -w "$1"`
- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
- $SED -e "$lt_sed_naive_backslashify"`
- ;;
- * )
- # Unfortunately, winepath does not exit with a non-zero
- # error code, so we are forced to check the contents of
- # stdout. On the other hand, if the command is not
- # found, the shell will set an exit code of 127 and print
- # *an error message* to stdout. So we must check for both
- # error code of zero AND non-empty stdout, which explains
- # the odd construction:
- func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
- $SED -e "$lt_sed_naive_backslashify"`
- else
- # Allow warning below.
- func_to_host_path_result=""
- fi
- ;;
- esac
- if test -z "$func_to_host_path_result" ; then
- func_error "Could not determine host path corresponding to"
- func_error " '$1'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback:
- func_to_host_path_result="$1"
- fi
- ;;
- esac
- fi
-}
-# end: func_to_host_path
-
-# func_to_host_pathlist arg
-#
-# Convert pathlists to host format when used with build tools.
-# See func_to_host_path(), above. This function supports the
-# following $build/$host combinations (but does no harm for
-# combinations not listed here):
-# $build $host
-# mingw (msys) mingw [e.g. native]
-# cygwin mingw
-# *nix + wine mingw
-#
-# Path separators are also converted from $build format to
-# $host format. If ARG begins or ends with a path separator
-# character, it is preserved (but converted to $host format)
-# on output.
-#
-# ARG is a pathlist (on $build) that should be converted to
-# the proper representation on $host. The result is stored
-# in $func_to_host_pathlist_result.
-func_to_host_pathlist ()
-{
- func_to_host_pathlist_result="$1"
- if test -n "$1" ; then
- case $host in
- *mingw* )
- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
- # Remove leading and trailing path separator characters from
- # ARG. msys behavior is inconsistent here, cygpath turns them
- # into '.;' and ';.', and winepath ignores them completely.
- func_to_host_pathlist_tmp2="$1"
- # Once set for this call, this variable should not be
- # reassigned. It is used in tha fallback case.
- func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
- $SED -e 's|^:*||' -e 's|:*$||'`
- case $build in
- *mingw* ) # Actually, msys.
- # Awkward: cmd appends spaces to result.
- lt_sed_strip_trailing_spaces="s/[ ]*\$//"
- func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
- $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
- $SED -e "$lt_sed_naive_backslashify"`
- ;;
- *cygwin* )
- func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
- $SED -e "$lt_sed_naive_backslashify"`
- ;;
- * )
- # unfortunately, winepath doesn't convert pathlists
- func_to_host_pathlist_result=""
- func_to_host_pathlist_oldIFS=$IFS
- IFS=:
- for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
- IFS=$func_to_host_pathlist_oldIFS
- if test -n "$func_to_host_pathlist_f" ; then
- func_to_host_path "$func_to_host_pathlist_f"
- if test -n "$func_to_host_path_result" ; then
- if test -z "$func_to_host_pathlist_result" ; then
- func_to_host_pathlist_result="$func_to_host_path_result"
- else
- func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
- fi
- fi
- fi
- IFS=:
- done
- IFS=$func_to_host_pathlist_oldIFS
- ;;
- esac
- if test -z "$func_to_host_pathlist_result" ; then
- func_error "Could not determine the host path(s) corresponding to"
- func_error " '$1'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback. This may break if $1 contains DOS-style drive
- # specifications. The fix is not to complicate the expression
- # below, but for the user to provide a working wine installation
- # with winepath so that path translation in the cross-to-mingw
- # case works properly.
- lt_replace_pathsep_nix_to_dos="s|:|;|g"
- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
- $SED -e "$lt_replace_pathsep_nix_to_dos"`
- fi
- # Now, add the leading and trailing path separators back
- case "$1" in
- :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
- ;;
- esac
- case "$1" in
- *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
- ;;
- esac
- ;;
- esac
- fi
-}
-# end: func_to_host_pathlist
-
# func_emit_cwrapperexe_src
# emit the source code for a wrapper executable on stdout
# Must ONLY be called from within func_mode_link because
@@ -3141,31 +4141,23 @@
This wrapper executable should never be moved out of the build directory.
If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "$SHELL $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
*/
EOF
cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
#include <stdio.h>
#include <stdlib.h>
#ifdef _MSC_VER
# include <direct.h>
# include <process.h>
# include <io.h>
-# define setmode _setmode
#else
# include <unistd.h>
# include <stdint.h>
# ifdef __CYGWIN__
# include <io.h>
-# define HAVE_SETENV
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
# endif
#endif
#include <malloc.h>
@@ -3177,6 +4169,44 @@
#include <fcntl.h>
#include <sys/stat.h>
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
#elif defined(MAXPATHLEN)
@@ -3192,14 +4222,7 @@
# define S_IXGRP 0
#endif
-#ifdef _MSC_VER
-# define S_IXUSR _S_IEXEC
-# define stat _stat
-# ifndef _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#endif
-
+/* path handling portability macros */
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
@@ -3230,10 +4253,6 @@
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */
-#ifdef __CYGWIN__
-# define FOPEN_WB "wb"
-#endif
-
#ifndef FOPEN_WB
# define FOPEN_WB "w"
#endif
@@ -3246,22 +4265,13 @@
if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
-#undef LTWRAPPER_DEBUGPRINTF
-#if defined DEBUGWRAPPER
-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
-static void
-ltwrapper_debugprintf (const char *fmt, ...)
-{
- va_list args;
- va_start (args, fmt);
- (void) vfprintf (stderr, fmt, args);
- va_end (args);
-}
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
#else
-# define LTWRAPPER_DEBUGPRINTF(args)
+static int lt_debug = 0;
#endif
-const char *program_name = NULL;
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
void *xmalloc (size_t num);
char *xstrdup (const char *string);
@@ -3271,41 +4281,27 @@
int make_executable (const char *path);
int check_executable (const char *path);
char *strendzap (char *str, const char *pat);
-void lt_fatal (const char *message, ...);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
void lt_setenv (const char *name, const char *value);
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_opt_process_env_set (const char *arg);
-void lt_opt_process_env_prepend (const char *arg);
-void lt_opt_process_env_append (const char *arg);
-int lt_split_name_value (const char *arg, char** name, char** value);
void lt_update_exe_path (const char *name, const char *value);
void lt_update_lib_path (const char *name, const char *value);
-
-static const char *script_text_part1 =
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
EOF
- func_emit_wrapper_part1 yes |
- $SED -e 's/\([\\"]\)/\\\1/g' \
- -e 's/^/ "/' -e 's/$/\\n"/'
- echo ";"
cat <<EOF
-
-static const char *script_text_part2 =
-EOF
- func_emit_wrapper_part2 yes |
- $SED -e 's/\([\\"]\)/\\\1/g' \
- -e 's/^/ "/' -e 's/$/\\n"/'
- echo ";"
-
- cat <<EOF
-const char * MAGIC_EXE = "$magic_exe";
+volatile const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- func_to_host_pathlist "$temp_rpath"
+ func_to_host_path "$temp_rpath"
cat <<EOF
-const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
EOF
else
cat <<"EOF"
@@ -3314,10 +4310,10 @@
fi
if test -n "$dllsearchpath"; then
- func_to_host_pathlist "$dllsearchpath:"
+ func_to_host_path "$dllsearchpath:"
cat <<EOF
const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
EOF
else
cat <<"EOF"
@@ -3340,25 +4336,11 @@
cat <<"EOF"
#define LTWRAPPER_OPTION_PREFIX "--lt-"
-#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
-static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-
static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
-static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
-static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
- /* argument is putenv-style "foo=bar", value of foo is set to bar */
-
-static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
-static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
- /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
-
-static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
-static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
- /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
-
int
main (int argc, char *argv[])
{
@@ -3374,10 +4356,13 @@
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
- LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
- LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+ newargz = XMALLOC (char *, argc + 1);
- /* very simple arg parsing; don't want to rely on getopt */
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
for (i = 1; i < argc; i++)
{
if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -3391,25 +4376,57 @@
esac
cat <<"EOF"
- printf ("%s", script_text_part1);
- printf ("%s", script_text_part2);
+ lt_dump_script (stdout);
return 0;
}
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
}
+ newargz[++newargc] = NULL;
- newargz = XMALLOC (char *, argc + 1);
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
tmp_pathspec = find_executable (argv[0]);
if (tmp_pathspec == NULL)
- lt_fatal ("Couldn't find %s", argv[0]);
- LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
- tmp_pathspec));
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
actual_cwrapper_path = chase_symlinks (tmp_pathspec);
- LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
- actual_cwrapper_path));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
XFREE (tmp_pathspec);
- actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
strendzap (actual_cwrapper_path, actual_cwrapper_name);
/* wrapper name transforms */
@@ -3427,8 +4444,9 @@
target_name = tmp_pathspec;
tmp_pathspec = 0;
- LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
- target_name));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
EOF
cat <<EOF
@@ -3478,80 +4496,19 @@
lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
- lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
- newargc=0;
- for (i = 1; i < argc; i++)
- {
- if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
- {
- if (argv[i][env_set_opt_len] == '=')
- {
- const char *p = argv[i] + env_set_opt_len + 1;
- lt_opt_process_env_set (p);
- }
- else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
- {
- lt_opt_process_env_set (argv[++i]); /* don't copy */
- }
- else
- lt_fatal ("%s missing required argument", env_set_opt);
- continue;
- }
- if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
- {
- if (argv[i][env_prepend_opt_len] == '=')
- {
- const char *p = argv[i] + env_prepend_opt_len + 1;
- lt_opt_process_env_prepend (p);
- }
- else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
- {
- lt_opt_process_env_prepend (argv[++i]); /* don't copy */
- }
- else
- lt_fatal ("%s missing required argument", env_prepend_opt);
- continue;
- }
- if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
- {
- if (argv[i][env_append_opt_len] == '=')
- {
- const char *p = argv[i] + env_append_opt_len + 1;
- lt_opt_process_env_append (p);
- }
- else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
- {
- lt_opt_process_env_append (argv[++i]); /* don't copy */
- }
- else
- lt_fatal ("%s missing required argument", env_append_opt);
- continue;
- }
- if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
- {
- /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
- namespace, but it is not one of the ones we know about and
- have already dealt with, above (inluding dump-script), then
- report an error. Otherwise, targets might begin to believe
- they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
- namespace. The first time any user complains about this, we'll
- need to make LTWRAPPER_OPTION_PREFIX a configure-time option
- or a configure.ac-settable value.
- */
- lt_fatal ("Unrecognized option in %s namespace: '%s'",
- ltwrapper_option_prefix, argv[i]);
- }
- /* otherwise ... */
- newargz[++newargc] = xstrdup (argv[i]);
- }
- newargz[++newargc] = NULL;
-
- LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
for (i = 0; i < newargc; i++)
{
- LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
}
EOF
@@ -3560,11 +4517,14 @@
mingw*)
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
- LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
return 127;
}
return rval;
@@ -3586,7 +4546,7 @@
{
void *p = (void *) malloc (num);
if (!p)
- lt_fatal ("Memory exhausted");
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
return p;
}
@@ -3620,8 +4580,8 @@
{
struct stat st;
- LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
- path ? (*path ? path : "EMPTY!") : "NULL!"));
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
if ((!path) || (!*path))
return 0;
@@ -3638,8 +4598,8 @@
int rval = 0;
struct stat st;
- LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
- path ? (*path ? path : "EMPTY!") : "NULL!"));
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
if ((!path) || (!*path))
return 0;
@@ -3665,8 +4625,8 @@
int tmp_len;
char *concat_name;
- LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
- wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
if ((wrapper == NULL) || (*wrapper == '\0'))
return NULL;
@@ -3719,7 +4679,8 @@
{
/* empty path: current directory */
if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
tmp_len = strlen (tmp);
concat_name =
XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -3744,7 +4705,8 @@
}
/* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
tmp_len = strlen (tmp);
concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
@@ -3770,8 +4732,9 @@
int has_symlinks = 0;
while (strlen (tmp_pathspec) && !has_symlinks)
{
- LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
- tmp_pathspec));
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
if (lstat (tmp_pathspec, &s) == 0)
{
if (S_ISLNK (s.st_mode) != 0)
@@ -3793,8 +4756,9 @@
}
else
{
- char *errstr = strerror (errno);
- lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
}
}
XFREE (tmp_pathspec);
@@ -3807,7 +4771,8 @@
tmp_pathspec = realpath (pathspec, buf);
if (tmp_pathspec == 0)
{
- lt_fatal ("Could not follow symlinks for %s", pathspec);
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
}
return xstrdup (tmp_pathspec);
#endif
@@ -3833,11 +4798,25 @@
return str;
}
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
static void
-lt_error_core (int exit_status, const char *mode,
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
const char *message, va_list ap)
{
- fprintf (stderr, "%s: %s: ", program_name, mode);
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
vfprintf (stderr, message, ap);
fprintf (stderr, ".\n");
@@ -3846,20 +4825,32 @@
}
void
-lt_fatal (const char *message, ...)
+lt_fatal (const char *file, int line, const char *message, ...)
{
va_list ap;
va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
va_end (ap);
}
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
void
lt_setenv (const char *name, const char *value)
{
- LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
- (name ? name : "<NULL>"),
- (value ? value : "<NULL>")));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
{
#ifdef HAVE_SETENV
/* always make a copy, for consistency with !HAVE_SETENV */
@@ -3904,95 +4895,12 @@
return new_value;
}
-int
-lt_split_name_value (const char *arg, char** name, char** value)
-{
- const char *p;
- int len;
- if (!arg || !*arg)
- return 1;
-
- p = strchr (arg, (int)'=');
-
- if (!p)
- return 1;
-
- *value = xstrdup (++p);
-
- len = strlen (arg) - strlen (*value);
- *name = XMALLOC (char, len);
- strncpy (*name, arg, len-1);
- (*name)[len - 1] = '\0';
-
- return 0;
-}
-
void
-lt_opt_process_env_set (const char *arg)
-{
- char *name = NULL;
- char *value = NULL;
-
- if (lt_split_name_value (arg, &name, &value) != 0)
- {
- XFREE (name);
- XFREE (value);
- lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
- }
-
- lt_setenv (name, value);
- XFREE (name);
- XFREE (value);
-}
-
-void
-lt_opt_process_env_prepend (const char *arg)
-{
- char *name = NULL;
- char *value = NULL;
- char *new_value = NULL;
-
- if (lt_split_name_value (arg, &name, &value) != 0)
- {
- XFREE (name);
- XFREE (value);
- lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
- }
-
- new_value = lt_extend_str (getenv (name), value, 0);
- lt_setenv (name, new_value);
- XFREE (new_value);
- XFREE (name);
- XFREE (value);
-}
-
-void
-lt_opt_process_env_append (const char *arg)
-{
- char *name = NULL;
- char *value = NULL;
- char *new_value = NULL;
-
- if (lt_split_name_value (arg, &name, &value) != 0)
- {
- XFREE (name);
- XFREE (value);
- lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
- }
-
- new_value = lt_extend_str (getenv (name), value, 1);
- lt_setenv (name, new_value);
- XFREE (new_value);
- XFREE (name);
- XFREE (value);
-}
-
-void
lt_update_exe_path (const char *name, const char *value)
{
- LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
- (name ? name : "<NULL>"),
- (value ? value : "<NULL>")));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
if (name && *name && value && *value)
{
@@ -4011,9 +4919,9 @@
void
lt_update_lib_path (const char *name, const char *value)
{
- LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
- (name ? name : "<NULL>"),
- (value ? value : "<NULL>")));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
if (name && *name && value && *value)
{
@@ -4023,11 +4931,152 @@
}
}
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ fputs ("/' -e 's/$/\\n", f);/'
+
+ cat <<"EOF"
}
+EOF
+}
# end: func_emit_cwrapperexe_src
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
# func_mode_link arg...
func_mode_link ()
{
@@ -4072,6 +5121,7 @@
new_inherited_linker_flags=
avoid_version=no
+ bindir=
dlfiles=
dlprefiles=
dlself=no
@@ -4164,6 +5214,11 @@
esac
case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
dlfiles|dlprefiles)
if test "$preload" = no; then
# Add the symbol object into the linking commands.
@@ -4195,9 +5250,9 @@
;;
*)
if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
+ func_append dlfiles " $arg"
else
- dlprefiles="$dlprefiles $arg"
+ func_append dlprefiles " $arg"
fi
prev=
continue
@@ -4221,7 +5276,7 @@
*-*-darwin*)
case "$deplibs " in
*" $qarg.ltframework "*) ;;
- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
;;
esac
;;
@@ -4240,7 +5295,7 @@
moreargs=
for fil in `cat "$save_arg"`
do
-# moreargs="$moreargs $fil"
+# func_append moreargs " $fil"
arg=$fil
# A libtool-controlled object.
@@ -4269,7 +5324,7 @@
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
+ func_append dlfiles " $pic_object"
prev=
continue
else
@@ -4281,7 +5336,7 @@
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
+ func_append dlprefiles " $pic_object"
prev=
fi
@@ -4351,12 +5406,12 @@
if test "$prev" = rpath; then
case "$rpath " in
*" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
+ *) func_append rpath " $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
+ *) func_append xrpath " $arg" ;;
esac
fi
prev=
@@ -4368,28 +5423,28 @@
continue
;;
weak)
- weak_libs="$weak_libs $arg"
+ func_append weak_libs " $arg"
prev=
continue
;;
xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xcompiler)
- compiler_flags="$compiler_flags $qarg"
+ func_append compiler_flags " $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
prev=
func_append compile_command " $wl$qarg"
func_append finalize_command " $wl$qarg"
@@ -4425,6 +5480,11 @@
continue
;;
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
-dlopen)
prev=dlfiles
continue
@@ -4475,15 +5535,16 @@
;;
-L*)
- func_stripname '-L' '' "$arg"
- dir=$func_stripname_result
- if test -z "$dir"; then
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
func_fatal_error "require no space between \`-L' and \`$1'"
else
func_fatal_error "need path for \`-L' option"
fi
fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -4495,24 +5556,30 @@
;;
esac
case "$deplibs " in
- *" -L$dir "*) ;;
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
*)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
;;
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
::) dllsearchpath=$dir;;
- *) dllsearchpath="$dllsearchpath:$dir";;
+ *) func_append dllsearchpath ":$dir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
+ *) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
@@ -4522,7 +5589,7 @@
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
continue
;;
@@ -4536,7 +5603,7 @@
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs System.ltframework"
+ func_append deplibs " System.ltframework"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
@@ -4556,7 +5623,7 @@
;;
esac
fi
- deplibs="$deplibs $arg"
+ func_append deplibs " $arg"
continue
;;
@@ -4568,8 +5635,8 @@
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
# Darwin uses the -arch flag to determine output architecture.
- -model|-arch|-isysroot)
- compiler_flags="$compiler_flags $arg"
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
prev=xcompiler
@@ -4577,12 +5644,12 @@
;;
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- compiler_flags="$compiler_flags $arg"
+ func_append compiler_flags " $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
case "$new_inherited_linker_flags " in
*" $arg "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
esac
continue
;;
@@ -4649,13 +5716,17 @@
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
*)
func_fatal_error "only absolute run-paths are allowed"
;;
esac
case "$xrpath " in
*" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
+ *) func_append xrpath " $dir" ;;
esac
continue
;;
@@ -4708,8 +5779,8 @@
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
- arg="$arg $wl$func_quote_for_eval_result"
- compiler_flags="$compiler_flags $func_quote_for_eval_result"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
@@ -4724,9 +5795,9 @@
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
- arg="$arg $wl$func_quote_for_eval_result"
- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
- linker_flags="$linker_flags $func_quote_for_eval_result"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
@@ -4754,23 +5825,27 @@
arg="$func_quote_for_eval_result"
;;
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m*, -t[45]*, -txscale* pass through architecture-specific
- # compiler args for GCC
- # -F/path gives path to uninstalled frameworks, gcc on darwin
- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
- # @file GCC response files
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
func_quote_for_eval "$arg"
arg="$func_quote_for_eval_result"
func_append compile_command " $arg"
func_append finalize_command " $arg"
- compiler_flags="$compiler_flags $arg"
+ func_append compiler_flags " $arg"
continue
;;
@@ -4782,7 +5857,7 @@
*.$objext)
# A standard object.
- objs="$objs $arg"
+ func_append objs " $arg"
;;
*.lo)
@@ -4813,7 +5888,7 @@
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
+ func_append dlfiles " $pic_object"
prev=
continue
else
@@ -4825,7 +5900,7 @@
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
+ func_append dlprefiles " $pic_object"
prev=
fi
@@ -4870,24 +5945,25 @@
*.$libext)
# An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
continue
;;
*.la)
# A libtool-controlled library.
+ func_resolve_sysroot "$arg"
if test "$prev" = dlfiles; then
# This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
+ func_append dlfiles " $func_resolve_sysroot_result"
prev=
elif test "$prev" = dlprefiles; then
# The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
+ func_append dlprefiles " $func_resolve_sysroot_result"
prev=
else
- deplibs="$deplibs $arg"
+ func_append deplibs " $func_resolve_sysroot_result"
fi
continue
;;
@@ -4925,7 +6001,7 @@
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
@@ -4934,6 +6010,8 @@
func_dirname "$output" "/" ""
output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
func_mkdir_p "$output_objdir"
@@ -4954,12 +6032,12 @@
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_duplicate_deps ; then
+ if $opt_preserve_dup_deps ; then
case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- libs="$libs $deplib"
+ func_append libs " $deplib"
done
if test "$linkmode" = lib; then
@@ -4972,9 +6050,9 @@
if $opt_duplicate_compiler_generated_deps; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
+ func_append pre_post_deps " $pre_post_dep"
done
fi
pre_post_deps=
@@ -5044,17 +6122,19 @@
for lib in $dlprefiles; do
# Ignore non-libtool-libs
dependency_libs=
+ func_resolve_sysroot "$lib"
case $lib in
- *.la) func_source "$lib" ;;
+ *.la) func_source "$func_resolve_sysroot_result" ;;
esac
# Collect preopened libtool deplibs, except any this library
# has declared as weak libs
for deplib in $dependency_libs; do
- deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
case " $weak_libs " in
*" $deplib_base "*) ;;
- *) deplibs="$deplibs $deplib" ;;
+ *) func_append deplibs " $deplib" ;;
esac
done
done
@@ -5075,11 +6155,11 @@
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- compiler_flags="$compiler_flags $deplib"
+ func_append compiler_flags " $deplib"
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
@@ -5164,7 +6244,7 @@
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
@@ -5177,7 +6257,8 @@
test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
if test "$pass" = conv; then
@@ -5191,7 +6272,8 @@
finalize_deplibs="$deplib $finalize_deplibs"
fi
func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
func_warning "\`-L' is ignored for archives/objects"
@@ -5202,17 +6284,21 @@
-R*)
if test "$pass" = link; then
func_stripname '-R' '' "$deplib"
- dir=$func_stripname_result
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
+ *) func_append xrpath " $dir" ;;
esac
fi
deplibs="$deplib $deplibs"
continue
;;
- *.la) lib="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
*.$libext)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
@@ -5230,7 +6316,7 @@
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
valid_a_lib=yes
fi
@@ -5240,15 +6326,15 @@
;;
esac
if test "$valid_a_lib" != yes; then
- $ECHO
+ echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have"
- $ECHO "*** because the file extensions .$libext of this argument makes me believe"
- $ECHO "*** that it is just a static archive that I should not use here."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
else
- $ECHO
+ echo
$ECHO "*** Warning: Linking the shared library $output against the"
$ECHO "*** static library $deplib is not portable!"
deplibs="$deplib $deplibs"
@@ -5275,11 +6361,11 @@
if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
+ func_append newdlprefiles " $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- newdlfiles="$newdlfiles $deplib"
+ func_append newdlfiles " $deplib"
fi
fi
continue
@@ -5321,20 +6407,20 @@
# Convert "-framework foo" to "foo.ltframework"
if test -n "$inherited_linker_flags"; then
- tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
case " $new_inherited_linker_flags " in
*" $tmp_inherited_linker_flag "*) ;;
- *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
esac
done
fi
- dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
if test "$pass" = conv; then
@@ -5345,17 +6431,17 @@
func_fatal_error "cannot find name of link library for \`$lib'"
fi
# It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
- if $opt_duplicate_deps ; then
+ if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $deplib"
done
elif test "$linkmode" != prog && test "$linkmode" != lib; then
func_fatal_error "\`$lib' is not a convenience library"
@@ -5366,9 +6452,15 @@
# Get the name of the library we link against.
linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
if test -z "$linklib"; then
func_fatal_error "cannot find name of link library for \`$lib'"
fi
@@ -5385,9 +6477,9 @@
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
+ func_append dlprefiles " $lib $dependency_libs"
else
- newdlfiles="$newdlfiles $lib"
+ func_append newdlfiles " $lib"
fi
continue
fi # $pass = dlopen
@@ -5409,14 +6501,14 @@
# Find the relevant object directory and library name.
if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
func_warning "library \`$lib' was moved."
dir="$ladir"
absdir="$abs_ladir"
libdir="$abs_ladir"
else
- dir="$libdir"
- absdir="$libdir"
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
fi
test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
@@ -5424,12 +6516,12 @@
dir="$ladir"
absdir="$abs_ladir"
# Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ func_append notinst_path " $abs_ladir"
else
dir="$ladir/$objdir"
absdir="$abs_ladir/$objdir"
# Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ func_append notinst_path " $abs_ladir"
fi
fi # $installed = yes
func_stripname 'lib' '.la' "$laname"
@@ -5440,20 +6532,46 @@
if test -z "$libdir" && test "$linkmode" = prog; then
func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Keep a list of preopened convenience libraries to check
- # that they are being used correctly in the link pass.
- test -z "$libdir" && \
- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
fi # $pass = dlpreopen
if test -z "$libdir"; then
@@ -5471,7 +6589,7 @@
if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
+ func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
linkalldeplibs=no
@@ -5484,7 +6602,8 @@
for deplib in $dependency_libs; do
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
;;
esac
# Need to link against all dependency_libs?
@@ -5495,12 +6614,12 @@
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_duplicate_deps ; then
+ if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $deplib"
done # for deplib
continue
fi # $linkmode = prog...
@@ -5515,7 +6634,7 @@
# Make sure the rpath contains only unique directories.
case "$temp_rpath:" in
*"$absdir:"*) ;;
- *) temp_rpath="$temp_rpath$absdir:" ;;
+ *) func_append temp_rpath "$absdir:" ;;
esac
fi
@@ -5527,7 +6646,7 @@
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
+ *) func_append compile_rpath " $absdir" ;;
esac
;;
esac
@@ -5536,7 +6655,7 @@
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
+ *) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
@@ -5561,12 +6680,12 @@
case $host in
*cygwin* | *mingw* | *cegcc*)
# No point in relinking DLLs because paths are not encoded
- notinst_deplibs="$notinst_deplibs $lib"
+ func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
+ func_append notinst_deplibs " $lib"
need_relink=yes
fi
;;
@@ -5583,7 +6702,7 @@
fi
done
if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
- $ECHO
+ echo
if test "$linkmode" = prog; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
@@ -5601,7 +6720,7 @@
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
+ *) func_append compile_rpath " $absdir" ;;
esac
;;
esac
@@ -5610,7 +6729,7 @@
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
+ *) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
@@ -5664,7 +6783,7 @@
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$mode" != relink; then
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
add_shlibpath=
add_dir=
add=
@@ -5686,9 +6805,9 @@
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
- $ECHO
- $ECHO "*** And there doesn't seem to be a static archive available"
- $ECHO "*** The link will probably fail, sorry"
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
else
add="$dir/$old_library"
fi
@@ -5720,7 +6839,7 @@
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -5742,7 +6861,7 @@
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
if test "$linkmode" = prog; then
@@ -5756,13 +6875,13 @@
test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
esac
fi
fi
fi
- if test "$linkmode" = prog || test "$mode" = relink; then
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
add_shlibpath=
add_dir=
add=
@@ -5776,7 +6895,7 @@
elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
@@ -5793,7 +6912,7 @@
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -5828,21 +6947,21 @@
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
- $ECHO
+ echo
$ECHO "*** Warning: This system can not link to static lib archive $lib."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
if test "$module" = yes; then
- $ECHO "*** But as you try to build a module library, libtool will still create "
- $ECHO "*** a static module, that should work as long as the dlopening application"
- $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
- $ECHO
- $ECHO "*** However, this would only work if libtool was able to extract symbol"
- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $ECHO "*** not find such a program. So, this module is probably useless."
- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
build_libtool_libs=module
@@ -5870,27 +6989,33 @@
temp_xrpath=$func_stripname_result
case " $xrpath " in
*" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
+ *) func_append xrpath " $temp_xrpath";;
esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
+ *) func_append temp_deplibs " $libdir";;
esac
done
dependency_libs="$temp_deplibs"
fi
- newlib_search_path="$newlib_search_path $absdir"
+ func_append newlib_search_path " $absdir"
# Link against this library
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
newdependency_libs="$deplib $newdependency_libs"
- if $opt_duplicate_deps ; then
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $func_resolve_sysroot_result"
done
if test "$link_all_deplibs" != no; then
@@ -5900,8 +7025,10 @@
case $deplib in
-L*) path="$deplib" ;;
*.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
func_dirname "$deplib" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
@@ -5928,8 +7055,8 @@
if test -z "$darwin_install_name"; then
darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
path=
fi
fi
@@ -5962,7 +7089,7 @@
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
- compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
dependency_libs="$newdependency_libs"
@@ -5979,7 +7106,7 @@
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
+ *) func_append lib_search_path " $dir" ;;
esac
done
newlib_search_path=
@@ -6037,10 +7164,10 @@
-L*)
case " $tmp_libs " in
*" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
+ *) func_append tmp_libs " $deplib" ;;
esac
;;
- *) tmp_libs="$tmp_libs $deplib" ;;
+ *) func_append tmp_libs " $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
@@ -6056,7 +7183,7 @@
;;
esac
if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
+ func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
@@ -6097,7 +7224,7 @@
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs="$output"
- objs="$objs$old_deplibs"
+ func_append objs "$old_deplibs"
;;
lib)
@@ -6130,10 +7257,10 @@
if test "$deplibs_check_method" != pass_all; then
func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
else
- $ECHO
+ echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
$ECHO "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
+ func_append libobjs " $objs"
fi
fi
@@ -6198,7 +7325,7 @@
age="$number_minor"
revision="$number_revision"
;;
- freebsd-aout|freebsd-elf|sunos)
+ freebsd-aout|freebsd-elf|qnx|sunos)
current="$number_major"
revision="$number_minor"
age="0"
@@ -6334,7 +7461,7 @@
done
# Make executables depend on our current version.
- verstring="$verstring:${current}.0"
+ func_append verstring ":${current}.0"
;;
qnx)
@@ -6402,10 +7529,10 @@
fi
func_generate_dlsyms "$libname" "$libname" "yes"
- libobjs="$libobjs $symfileobj"
+ func_append libobjs " $symfileobj"
test "X$libobjs" = "X " && libobjs=
- if test "$mode" != relink; then
+ if test "$opt_mode" != relink; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
@@ -6421,7 +7548,7 @@
continue
fi
fi
- removelist="$removelist $p"
+ func_append removelist " $p"
;;
*) ;;
esac
@@ -6432,27 +7559,28 @@
# Now set the variables for building old libraries.
if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
+ func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
#for path in $notinst_path; do
- # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
- # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
- # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
#done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
temp_xrpath=
for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
done
if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
@@ -6466,7 +7594,7 @@
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
+ *) func_append dlfiles " $lib" ;;
esac
done
@@ -6476,19 +7604,19 @@
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
+ *) func_append dlprefiles " $lib" ;;
esac
done
if test "$build_libtool_libs" = yes; then
if test -n "$rpath"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
- deplibs="$deplibs System.ltframework"
+ func_append deplibs " System.ltframework"
;;
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
@@ -6505,7 +7633,7 @@
*)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
+ func_append deplibs " -lc"
fi
;;
esac
@@ -6554,7 +7682,7 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
i=""
;;
esac
@@ -6565,21 +7693,21 @@
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
else
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which I believe you do not have"
- $ECHO "*** because a test_compile did reveal that the linker did not use it for"
- $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
fi
fi
;;
*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
;;
esac
done
@@ -6597,7 +7725,7 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
i=""
;;
esac
@@ -6608,29 +7736,29 @@
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
else
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have"
- $ECHO "*** because a test_compile did reveal that the linker did not use this one"
- $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
fi
fi
else
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning! Library $i is needed by this library but I was not able to"
- $ECHO "*** make it link in! You will probably need to install it or some"
- $ECHO "*** library that it depends on before this library will be fully"
- $ECHO "*** functional. Installing it before continuing would be even better."
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
fi
;;
*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
;;
esac
done
@@ -6647,15 +7775,27 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
for potent_lib in $potential_libs; do
# Follow soft links.
if ls -lLd "$potent_lib" 2>/dev/null |
@@ -6672,13 +7812,13 @@
potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
break 2
fi
@@ -6687,12 +7827,12 @@
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have"
- $ECHO "*** because I did check the linker path looking for a file starting"
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
@@ -6703,7 +7843,7 @@
;;
*)
# Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
@@ -6719,7 +7859,7 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
;;
esac
@@ -6730,9 +7870,9 @@
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
break 2
fi
@@ -6741,12 +7881,12 @@
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have"
- $ECHO "*** because I did check the linker path looking for a file starting"
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
@@ -6757,32 +7897,32 @@
;;
*)
# Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
;;
none | unknown | *)
newdeplibs=""
- tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
- -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
for i in $predeps $postdeps ; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
done
fi
- if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
- $GREP . >/dev/null; then
- $ECHO
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
if test "X$deplibs_check_method" = "Xnone"; then
- $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
else
- $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+ echo "*** Warning: inter-library dependencies are not known to be supported."
fi
- $ECHO "*** All declared inter-library dependencies are being dropped."
+ echo "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
- fi
+ ;;
+ esac
;;
esac
versuffix=$versuffix_save
@@ -6794,23 +7934,23 @@
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library with the System framework
- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
if test "$droppeddeps" = yes; then
if test "$module" = yes; then
- $ECHO
- $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
- $ECHO "*** a static module, that should work as long as the dlopening"
- $ECHO "*** application is linked with the -dlopen flag."
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
- $ECHO
- $ECHO "*** However, this would only work if libtool was able to extract symbol"
- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $ECHO "*** not find such a program. So, this module is probably useless."
- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
@@ -6820,16 +7960,16 @@
build_libtool_libs=no
fi
else
- $ECHO "*** The inter-library dependencies that have been dropped here will be"
- $ECHO "*** automatically added whenever a program is linked with this library"
- $ECHO "*** or is declared to -dlopen it."
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
if test "$allow_undefined" = no; then
- $ECHO
- $ECHO "*** Since this library must not contain undefined symbols,"
- $ECHO "*** because either the platform does not support them or"
- $ECHO "*** it was explicitly requested with -no-undefined,"
- $ECHO "*** libtool will only create a static version of it."
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
@@ -6846,9 +7986,9 @@
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
case $host in
*-*-darwin*)
- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
- new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
- deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
@@ -6861,7 +8001,7 @@
*)
case " $deplibs " in
*" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
+ func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
@@ -6871,10 +8011,10 @@
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
done
deplibs="$new_libs"
@@ -6891,10 +8031,12 @@
hardcode_libdirs=
dep_rpath=
rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
@@ -6903,18 +8045,18 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
+ func_append dep_rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
+ *) func_apped perm_rpath " $libdir" ;;
esac
fi
done
@@ -6932,7 +8074,7 @@
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
@@ -6940,7 +8082,7 @@
fi
shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
@@ -6966,18 +8108,18 @@
linknames=
for link
do
- linknames="$linknames $link"
+ func_append linknames " $link"
done
# Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
test "X$libobjs" = "X " && libobjs=
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
export_symbols="$output_objdir/$libname.uexp"
- delfiles="$delfiles $export_symbols"
+ func_append delfiles " $export_symbols"
fi
orig_export_symbols=
@@ -7008,14 +8150,46 @@
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
+ for cmd1 in $cmds; do
IFS="$save_ifs"
- eval cmd=\"$cmd\"
- func_len " $cmd"
- len=$func_len_result
- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
func_show_eval "$cmd" 'exit $?'
skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
else
# The command line is too long to execute in one step.
func_verbose "using reloadable object file for export list..."
@@ -7036,7 +8210,7 @@
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols="$export_symbols"
test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -7048,7 +8222,7 @@
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
@@ -7058,7 +8232,7 @@
case " $convenience " in
*" $test_deplib "*) ;;
*)
- tmp_deplibs="$tmp_deplibs $test_deplib"
+ func_append tmp_deplibs " $test_deplib"
;;
esac
done
@@ -7078,21 +8252,21 @@
test "X$libobjs" = "X " && libobjs=
else
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
+ func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
fi
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
+ func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
+ if test "$opt_mode" = relink; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
@@ -7137,7 +8311,8 @@
save_libobjs=$libobjs
fi
save_output=$output
- output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
+ func_basename "$output"
+ output_la=$func_basename_result
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -7150,13 +8325,16 @@
if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
output=${output_objdir}/${output_la}.lnkscript
func_verbose "creating GNU ld script: $output"
- $ECHO 'INPUT (' > $output
+ echo 'INPUT (' > $output
for obj in $save_libobjs
do
- $ECHO "$obj" >> $output
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
done
- $ECHO ')' >> $output
- delfiles="$delfiles $output"
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
output=${output_objdir}/${output_la}.lnk
func_verbose "creating linker input file list: $output"
@@ -7170,10 +8348,12 @@
fi
for obj
do
- $ECHO "$obj" >> $output
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
done
- delfiles="$delfiles $output"
- output=$firstobj\"$file_list_spec$output\"
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
@@ -7197,17 +8377,19 @@
# command to the queue.
if test "$k" -eq 1 ; then
# The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
else
# All subsequent reloadable object files will link in
# the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
last_robj=$output_objdir/$output_la-${k}.$objext
func_arith $k + 1
k=$func_arith_result
output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
+ objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
len=$func_arith_result
@@ -7217,11 +8399,12 @@
# reloadable object file. All subsequent reloadable object
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
if test -n "$last_robj"; then
eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
fi
- delfiles="$delfiles $output"
+ func_append delfiles " $output"
else
output=
@@ -7255,7 +8438,7 @@
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$mode" = relink; then
+ if test "$opt_mode" = relink; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -7276,7 +8459,7 @@
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols="$export_symbols"
test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
@@ -7288,7 +8471,7 @@
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
@@ -7329,10 +8512,10 @@
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
- libobjs="$libobjs $func_extract_archives_result"
+ func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
@@ -7348,7 +8531,7 @@
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$mode" = relink; then
+ if test "$opt_mode" = relink; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -7360,7 +8543,7 @@
IFS="$save_ifs"
# Restore the uninstalled library and exit
- if test "$mode" = relink; then
+ if test "$opt_mode" = relink; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
@@ -7441,18 +8624,21 @@
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
func_execute_cmds "$reload_cmds" 'exit $?'
@@ -7512,8 +8698,8 @@
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
@@ -7524,14 +8710,14 @@
if test "$tagname" = CXX ; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
;;
esac
fi
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
@@ -7545,7 +8731,7 @@
*)
case " $compile_deplibs " in
*" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
+ func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
@@ -7555,17 +8741,17 @@
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
done
compile_deplibs="$new_libs"
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -7573,7 +8759,7 @@
# This is the magic to use -rpath.
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
done
fi
@@ -7592,18 +8778,18 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
+ func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
+ *) func_append perm_rpath " $libdir" ;;
esac
fi
case $host in
@@ -7612,12 +8798,12 @@
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
+ *) func_append dllsearchpath ":$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
+ *) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
@@ -7643,18 +8829,18 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
+ func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$finalize_perm_rpath " in
*" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
esac
fi
done
@@ -7668,8 +8854,8 @@
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
- compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -7681,15 +8867,15 @@
wrappers_required=yes
case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
*cygwin* | *mingw* )
if test "$build_libtool_libs" != yes; then
wrappers_required=no
fi
;;
- *cegcc)
- # Disable wrappers for cegcc, we are cross compiling anyway.
- wrappers_required=no
- ;;
*)
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
wrappers_required=no
@@ -7698,13 +8884,19 @@
esac
if test "$wrappers_required" = no; then
# Replace the output file specification.
- compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
func_show_eval "$link_command" 'exit_status=$?'
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
# Delete the generated files.
if test -f "$output_objdir/${outputname}S.${objext}"; then
func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
@@ -7727,7 +8919,7 @@
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -7735,7 +8927,7 @@
# We should set the runpath_var.
rpath=
for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -7745,11 +8937,18 @@
# We don't need to create a wrapper script.
link_command="$compile_var$compile_command$compile_rpath"
# Replace the output file specification.
- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
$opt_dry_run || $RM $output
# Link the executable and exit
func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
exit $EXIT_SUCCESS
fi
@@ -7764,7 +8963,7 @@
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
else
# fast_install is set to needless
relink_command=
@@ -7776,13 +8975,19 @@
fi
# Replace the output file specification.
- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
# Delete the old output files.
$opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
func_show_eval "$link_command" 'exit $?'
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
# Now create the wrapper script.
func_verbose "creating $output"
@@ -7800,20 +9005,9 @@
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
fi
- # Quote $ECHO for shipping.
- if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
- fi
-
# Only actually do things if not in dry run mode.
$opt_dry_run || {
# win32 will think the script is a binary if it has
@@ -7891,7 +9085,7 @@
else
oldobjs="$old_deplibs $non_pic_objects"
if test "$preload" = yes && test -f "$symfileobj"; then
- oldobjs="$oldobjs $symfileobj"
+ func_append oldobjs " $symfileobj"
fi
fi
addlibs="$old_convenience"
@@ -7899,10 +9093,10 @@
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
+ func_append oldobjs " $func_extract_archives_result"
fi
# Do each command in the archive commands.
@@ -7913,10 +9107,10 @@
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
- oldobjs="$oldobjs $func_extract_archives_result"
+ func_append oldobjs " $func_extract_archives_result"
fi
# POSIX demands no paths to be encoded in archives. We have
@@ -7932,9 +9126,9 @@
done | sort | sort -uc >/dev/null 2>&1); then
:
else
- $ECHO "copying selected object files to avoid basename conflicts..."
+ echo "copying selected object files to avoid basename conflicts..."
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
oldobjs=
@@ -7958,9 +9152,9 @@
esac
done
func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
;;
- *) oldobjs="$oldobjs $obj" ;;
+ *) func_append oldobjs " $obj" ;;
esac
done
fi
@@ -7970,6 +9164,16 @@
len=$func_len_result
if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
func_verbose "using piecewise archive linking..."
@@ -8043,7 +9247,7 @@
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
@@ -8066,9 +9270,19 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
func_fatal_error "\`$deplib' is not a valid libtool archive"
- newdependency_libs="$newdependency_libs $libdir/$name"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
@@ -8082,9 +9296,9 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
- newdlfiles="$newdlfiles $libdir/$name"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
- *) newdlfiles="$newdlfiles $lib" ;;
+ *) func_append newdlfiles " $lib" ;;
esac
done
dlfiles="$newdlfiles"
@@ -8101,7 +9315,7 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
- newdlprefiles="$newdlprefiles $libdir/$name"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
@@ -8113,7 +9327,7 @@
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- newdlfiles="$newdlfiles $abs"
+ func_append newdlfiles " $abs"
done
dlfiles="$newdlfiles"
newdlprefiles=
@@ -8122,15 +9336,33 @@
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- newdlprefiles="$newdlprefiles $abs"
+ func_append newdlprefiles " $abs"
done
dlprefiles="$newdlprefiles"
fi
$RM $output
# place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
esac
$ECHO > $output "\
# $outputname - a libtool library file
@@ -8189,7 +9421,7 @@
exit $EXIT_SUCCESS
}
-{ test "$mode" = link || test "$mode" = relink; } &&
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
func_mode_link ${1+"$@"}
@@ -8209,9 +9441,9 @@
for arg
do
case $arg in
- -f) RM="$RM $arg"; rmforce=yes ;;
- -*) RM="$RM $arg" ;;
- *) files="$files $arg" ;;
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
esac
done
@@ -8220,24 +9452,23 @@
rmdirs=
- origobjdir="$objdir"
for file in $files; do
func_dirname "$file" "" "."
dir="$func_dirname_result"
if test "X$dir" = X.; then
- objdir="$origobjdir"
+ odir="$objdir"
else
- objdir="$dir/$origobjdir"
+ odir="$dir/$objdir"
fi
func_basename "$file"
name="$func_basename_result"
- test "$mode" = uninstall && objdir="$dir"
+ test "$opt_mode" = uninstall && odir="$dir"
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
esac
fi
@@ -8263,18 +9494,17 @@
# Delete the libtool libraries and symlinks.
for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
+ func_append rmfiles " $odir/$n"
done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$mode" in
+ case "$opt_mode" in
clean)
- case " $library_names " in
- # " " in the beginning catches empty $dlname
+ case " $library_names " in
*" $dlname "*) ;;
- *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
esac
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
@@ -8302,19 +9532,19 @@
# Add PIC object to the list of files to remove.
if test -n "$pic_object" &&
test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
+ func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
if test -n "$non_pic_object" &&
test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
+ func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$mode" = clean ; then
+ if test "$opt_mode" = clean ; then
noexename=$name
case $file in
*.exe)
@@ -8324,7 +9554,7 @@
noexename=$func_stripname_result
# $file with .exe has already been added to rmfiles,
# add $file without .exe
- rmfiles="$rmfiles $file"
+ func_append rmfiles " $file"
;;
esac
# Do a test to see if this is a libtool program.
@@ -8333,7 +9563,7 @@
func_ltwrapper_scriptname "$file"
relink_command=
func_source $func_ltwrapper_scriptname_result
- rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
else
relink_command=
func_source $dir/$noexename
@@ -8341,12 +9571,12 @@
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
+ func_append rmfiles " $odir/lt-$name"
fi
if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+ func_append rmfiles " $odir/lt-${noexename}.c"
fi
fi
fi
@@ -8354,7 +9584,6 @@
esac
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- objdir="$origobjdir"
# Try to remove the ${objdir}s in the directories where we deleted files
for dir in $rmdirs; do
@@ -8366,16 +9595,16 @@
exit $exit_status
}
-{ test "$mode" = uninstall || test "$mode" = clean; } &&
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
func_mode_uninstall ${1+"$@"}
-test -z "$mode" && {
+test -z "$opt_mode" && {
help="$generic_help"
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$mode'"
+ func_fatal_help "invalid operation mode \`$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
Modified: lighttpd/trunk/m4/libtool.m4
===================================================================
--- lighttpd/trunk/m4/libtool.m4 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/m4/libtool.m4 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,7 +1,8 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
@@ -10,7 +11,8 @@
m4_define([_LT_COPYING], [dnl
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
@@ -37,7 +39,7 @@
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
])
-# serial 56 LT_INIT
+# serial 57 LT_INIT
# LT_PREREQ(VERSION)
@@ -66,6 +68,7 @@
# ------------------
AC_DEFUN([LT_INIT],
[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
AC_BEFORE([$0], [LTDL_INIT])dnl
@@ -82,6 +85,8 @@
AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])
@@ -118,7 +123,7 @@
*) break;;
esac
done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
])
@@ -138,6 +143,9 @@
m4_defun([_LT_SETUP],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
@@ -160,10 +168,13 @@
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
_LT_CONFIG_LIBTOOL_INIT([
# See if we are running on zsh, and set the options which allow our
@@ -179,7 +190,6 @@
_LT_CHECK_OBJDIR
m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
case $host_os in
aix3*)
@@ -193,23 +203,6 @@
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
# Global variables:
ofile=libtool
can_build_shared=yes
@@ -250,6 +243,28 @@
])# _LT_SETUP
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
# _LT_PROG_LTMAIN
# ---------------
# Note that this code is called both from `configure', and `config.status'
@@ -408,7 +423,7 @@
# declaration there will have the same value as in `configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
# _LT_CONFIG_STATUS_DECLARATIONS
@@ -418,7 +433,7 @@
# embedded single quotes properly. In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -517,12 +532,20 @@
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -533,9 +556,9 @@
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -543,16 +566,38 @@
esac
done
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
- ;;
-esac
-
_LT_OUTPUT_LIBTOOL_INIT
])
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
# ---------
@@ -562,20 +607,11 @@
AC_DEFUN([LT_OUTPUT],
[: ${CONFIG_LT=./config.lt}
AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+cat >>"$CONFIG_LT" <<\_LTEOF
lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
-
-exec AS_MESSAGE_FD>&1
exec AS_MESSAGE_LOG_FD>>config.log
{
echo
@@ -601,7 +637,7 @@
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
@@ -646,15 +682,13 @@
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
- lt_cl_success=:
- test "$silent" = yes &&
- lt_config_lt_args="$lt_config_lt_args --quiet"
- exec AS_MESSAGE_LOG_FD>/dev/null
- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
- exec AS_MESSAGE_LOG_FD>>config.log
- $lt_cl_success || AS_EXIT(1)
-fi
+lt_cl_success=:
+test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
])# LT_OUTPUT
@@ -717,15 +751,12 @@
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
- _LT_PROG_XSI_SHELLFNS
+ _LT_PROG_REPLACE_SHELLFNS
- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" ||
+ mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
],
@@ -831,11 +862,13 @@
AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
dnl AC_DEFUN([AC_LIBTOOL_F77], [])
dnl AC_DEFUN([AC_LIBTOOL_FC], [])
dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
# _LT_TAG_COMPILER
@@ -940,6 +973,31 @@
[lt_cv_ld_exported_symbols_list=no])
LDFLAGS="$save_LDFLAGS"
])
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
case $host_os in
rhapsody* | darwin1.[[012]])
_lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -967,7 +1025,7 @@
else
_lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
- if test "$DSYMUTIL" != ":"; then
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -987,7 +1045,11 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
case $cc_basename in
@@ -995,7 +1057,7 @@
*) _lt_dar_can_shared=$GCC ;;
esac
if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
_LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
_LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -1011,203 +1073,142 @@
fi
])
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
])# _LT_SYS_MODULE_PATH_AIX
# _LT_SHELL_INIT(ARG)
# -------------------
m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
# _LT_PROG_ECHO_BACKSLASH
# -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-case X$lt_ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
- # Yippee, $ECHO works!
- :
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
fi
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<_LT_EOF
-[$]*
-_LT_EOF
- exit 0
-fi
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+case "$ECHO" in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
-if test -z "$lt_ECHO"; then
- if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
- then
- break
- fi
- done
- fi
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
- else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
- if test "X$ECHO" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- ECHO='print -r'
- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- ECHO='printf %s\n'
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[ --with-sysroot[=DIR] Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- ECHO=echo
- fi
- fi
- fi
- fi
- fi
-fi
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(lt_ECHO)
-])
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
- [An echo program that does not interpret backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
@@ -1236,7 +1237,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
if test "$lt_cv_prog_gnu_ld" = yes; then
case `/usr/bin/file conftest.$ac_objext` in
@@ -1354,14 +1355,47 @@
])# _LT_ENABLE_LOCK
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
+[_LT_PROG_AR
AC_CHECK_TOOL(STRIP, strip, :)
test -z "$STRIP" && STRIP=:
@@ -1388,10 +1422,19 @@
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
_LT_DECL([], [old_postinstall_cmds], [2])
_LT_DECL([], [old_postuninstall_cmds], [2])
_LT_TAGDECL([], [old_archive_cmds], [2],
[Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
])# _LT_CMD_OLD_ARCHIVE
@@ -1416,15 +1459,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
@@ -1464,7 +1507,7 @@
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
@@ -1527,6 +1570,11 @@
lt_cv_sys_max_cmd_len=8192;
;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
@@ -1591,8 +1639,8 @@
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
@@ -1643,7 +1691,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
+[#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -1684,7 +1732,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -1693,7 +1747,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -1869,16 +1927,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
@@ -2037,6 +2095,7 @@
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
@@ -2045,16 +2104,23 @@
darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
*) lt_awk_arg="/^libraries:/" ;;
esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary.
lt_tmp_lt_search_path_spec=
@@ -2067,7 +2133,7 @@
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS=" "; FS="/|\n";} {
lt_foo="";
lt_count=0;
@@ -2087,7 +2153,13 @@
if (lt_foo != "") { lt_freq[[lt_foo]]++; }
if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
@@ -2175,7 +2247,7 @@
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
@@ -2206,8 +2278,9 @@
need_version=no
need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
@@ -2228,36 +2301,83 @@
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
;;
esac
+ dynamic_linker='Win32 ld.exe'
;;
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
*)
+ # Assume MSVC wrapper
library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
;;
esac
- dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
@@ -2341,9 +2461,23 @@
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
@@ -2386,8 +2520,10 @@
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[[3-9]]*)
@@ -2454,16 +2590,21 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+
# Some binutils ld are patched to set DT_RUNPATH
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
- [shlibpath_overrides_runpath=yes])])
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
@@ -2472,7 +2613,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -2717,6 +2858,8 @@
The last name is the one that the linker finds with -lNAME]])
_LT_DECL([], [soname_spec], [1],
[[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
_LT_DECL([], [postinstall_cmds], [2],
[Command to use after installation of a shared archive])
_LT_DECL([], [postuninstall_cmds], [2],
@@ -2829,6 +2972,7 @@
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
@@ -2950,6 +3094,11 @@
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -2958,8 +3107,8 @@
fi
;;
esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
])# _LT_CMD_RELOAD
@@ -3011,16 +3160,18 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-cegcc)
+cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -3050,6 +3201,10 @@
lt_cv_deplibs_check_method=pass_all
;;
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
@@ -3058,11 +3213,11 @@
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
@@ -3162,6 +3317,21 @@
;;
esac
])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -3169,7 +3339,11 @@
_LT_DECL([], [deplibs_check_method], [1],
[Method to check whether dependent libraries are shared objects])
_LT_DECL([], [file_magic_cmd], [1],
- [Command to use when deplibs_check_method == "file_magic"])
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
])# _LT_CHECK_MAGIC_METHOD
@@ -3226,7 +3400,19 @@
NM="$lt_cv_path_NM"
else
# Didn't find any BSD compatible name lister, look for dumpbin.
- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
AC_SUBST([DUMPBIN])
if test "$DUMPBIN" != ":"; then
NM="$DUMPBIN"
@@ -3239,13 +3425,13 @@
AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
[lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
cat conftest.out >&AS_MESSAGE_LOG_FD
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
@@ -3260,7 +3446,68 @@
dnl AC_DEFUN([AM_PROG_NM], [])
dnl AC_DEFUN([AC_PROG_NM], [])
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
# LT_LIB_M
# --------
# check for math library
@@ -3268,7 +3515,7 @@
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
@@ -3296,7 +3543,12 @@
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
if test "$GCC" = yes; then
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
_LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
lt_cv_prog_compiler_rtti_exceptions,
@@ -3313,6 +3565,7 @@
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
@@ -3380,8 +3633,8 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -3417,6 +3670,7 @@
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -3438,7 +3692,7 @@
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
@@ -3450,6 +3704,18 @@
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t at _DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT@&t at _DLSYM_CONST
+#else
+# define LT@&t at _DLSYM_CONST const
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -3461,7 +3727,7 @@
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
-const struct {
+LT@&t at _DLSYM_CONST struct {
const char *name;
void *address;
}
@@ -3487,15 +3753,15 @@
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
fi
@@ -3528,6 +3794,13 @@
AC_MSG_RESULT(ok)
fi
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
@@ -3538,6 +3811,8 @@
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
@@ -3549,7 +3824,6 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=
-AC_MSG_CHECKING([for $compiler option to produce PIC])
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
if test "$GXX" = yes; then
@@ -3600,6 +3874,11 @@
# DJGPP does not support shared libraries at all
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
@@ -3649,6 +3928,12 @@
;;
esac
;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
dgux*)
case $cc_basename in
ec++*)
@@ -3738,8 +4023,8 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- xlc* | xlC*)
- # IBM XL 8.0 on PPC
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -3801,7 +4086,7 @@
;;
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -3905,6 +4190,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
@@ -3947,6 +4238,13 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
+ ;;
+ esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
@@ -4010,7 +4308,13 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4022,26 +4326,26 @@
# All Alpha code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- xl*)
- # IBM XL C 8.0/Fortran 10.1 on PPC
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
*Sun\ C*)
# Sun C 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
- ;;
esac
;;
esac
@@ -4072,7 +4376,7 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
case $cc_basename in
- f77* | f90* | f95*)
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
@@ -4129,10 +4433,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
;;
esac
-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
- [How to pass a linker flag through the compiler])
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
#
# Check to make sure the PIC flag actually works.
#
@@ -4150,6 +4456,8 @@
_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
[Additional compiler flags for building library objects])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
#
# Check to make sure the static flag actually works.
#
@@ -4170,6 +4478,7 @@
m4_defun([_LT_LINKER_SHLIBS],
[AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_DECL_SED])dnl
@@ -4178,30 +4487,38 @@
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
_LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
+ ;;
cygwin* | mingw* | cegcc*)
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- linux* | k*bsd*-gnu)
+ case $cc_basename in
+ cl*) ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | gnu*)
_LT_TAGVAR(link_all_deplibs, $1)=no
- ;;
+ ;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
+ ;;
esac
- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
], [
runpath_var=
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -4261,13 +4578,39 @@
openbsd*)
with_gnu_ld=no
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | gnu*)
_LT_TAGVAR(link_all_deplibs, $1)=no
;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -4301,11 +4644,12 @@
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
_LT_EOF
fi
@@ -4341,10 +4685,12 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -4362,6 +4708,11 @@
fi
;;
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4387,15 +4738,16 @@
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -4406,13 +4758,17 @@
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
@@ -4428,17 +4784,17 @@
fi
case $cc_basename in
- xlf*)
+ xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test "x$supports_anon_versioning" = xyes; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -4452,8 +4808,8 @@
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -4471,8 +4827,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4518,8 +4874,8 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4559,8 +4915,10 @@
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
@@ -4648,9 +5006,9 @@
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
+ _LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -4659,14 +5017,19 @@
else
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
+ _LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared libraries.
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -4698,20 +5061,63 @@
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -4749,7 +5155,7 @@
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4757,7 +5163,7 @@
hpux9*)
if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
@@ -4772,8 +5178,8 @@
;;
hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -4791,16 +5197,16 @@
;;
hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
@@ -4812,7 +5218,14 @@
_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
@@ -4840,19 +5253,34 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- AC_LINK_IFELSE(int foo(void) {},
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
- )
- LDFLAGS="$save_LDFLAGS"
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS="$save_LDFLAGS"])
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4914,17 +5342,17 @@
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4934,13 +5362,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -4953,9 +5381,9 @@
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
@@ -5131,36 +5559,38 @@
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
- _LT_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
;;
esac
fi
@@ -5225,8 +5655,6 @@
to runtime path list])
_LT_TAGDECL([], [link_all_deplibs], [0],
[Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
- [Fix the shell variable $srcfile for the compiler])
_LT_TAGDECL([], [always_export_symbols], [0],
[Set to "yes" if exported symbols are required])
_LT_TAGDECL([], [export_symbols_cmds], [2],
@@ -5237,6 +5665,8 @@
[Symbols that must always be exported])
_LT_TAGDECL([], [prelink_cmds], [2],
[Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
_LT_TAGDECL([], [file_list_spec], [1],
[Specify filename containing input files])
dnl FIXME: Not yet implemented
@@ -5330,14 +5760,15 @@
])# _LT_LANG_C_CONFIG
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
(test "X$CXX" != "Xg++"))) ; then
@@ -5345,23 +5776,7 @@
else
_lt_caught_CXX_error=yes
fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -5382,6 +5797,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -5413,6 +5830,7 @@
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
@@ -5430,6 +5848,7 @@
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -5451,8 +5870,8 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5484,7 +5903,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
GXX=no
@@ -5593,10 +6012,10 @@
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an empty
# executable.
- _LT_SYS_MODULE_PATH_AIX
+ _LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -5605,14 +6024,19 @@
else
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
+ _LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared
# libraries.
@@ -5642,28 +6066,75 @@
;;
cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
@@ -5705,6 +6176,11 @@
gnu*)
;;
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
hpux9*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -5729,11 +6205,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -5794,7 +6270,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes; then
@@ -5804,10 +6280,10 @@
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
@@ -5837,7 +6313,7 @@
case $cc_basename in
CC*)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -5848,9 +6324,9 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -5879,7 +6355,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5916,26 +6392,26 @@
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
$RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
;;
- *) # Version 6 will use weak symbols
+ *) # Version 6 and above use weak symbols
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
;;
@@ -5943,7 +6419,7 @@
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
;;
cxx*)
# Compaq C++
@@ -5962,9 +6438,9 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
- xl*)
+ xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5984,13 +6460,13 @@
_LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
# $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
# would be better.
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -6059,7 +6535,7 @@
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
_LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
fi
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -6094,15 +6570,15 @@
case $host in
osf3*)
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
@@ -6118,17 +6594,17 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
;;
esac
@@ -6138,7 +6614,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# FIXME: insert proper C++ library support
@@ -6174,7 +6650,7 @@
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
@@ -6195,7 +6671,7 @@
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -6215,14 +6691,14 @@
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
@@ -6233,7 +6709,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
@@ -6287,6 +6763,10 @@
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -6342,6 +6822,7 @@
fi # test -n "$compiler"
CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
@@ -6356,6 +6837,29 @@
])# _LT_LANG_CXX_CONFIG
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
@@ -6364,6 +6868,7 @@
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
@@ -6414,6 +6919,13 @@
};
_LT_EOF
])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+esac
+
dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
@@ -6425,7 +6937,7 @@
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case $p in
+ case ${prev}${p} in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
@@ -6434,13 +6946,22 @@
test $p = "-R"; then
prev=$p
continue
- else
- prev=
fi
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
+ case ${prev} in
+ -L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
@@ -6460,8 +6981,10 @@
_LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
fi
fi
+ prev=
;;
+ *.lto.$objext) ;; # Ignore GCC LTO objects
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
@@ -6497,6 +7020,7 @@
fi
$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
@@ -6533,7 +7057,7 @@
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# The more standards-conforming stlport4 library is
# incompatible with the Cstd library. Avoid specifying
# it if it's in CXXFLAGS. Ignore libCrun as
@@ -6577,32 +7101,16 @@
])# _LT_SYS_HIDDEN_LIBDEPS
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
- _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
-
-
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6621,6 +7129,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6660,7 +7170,9 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -6714,39 +7226,25 @@
GCC=$lt_save_GCC
CC="$lt_save_CC"
+ CFLAGS="$lt_save_CFLAGS"
fi # test "$_lt_disable_F77" != yes
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
- _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
-
-
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
+[AC_LANG_PUSH(Fortran)
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
@@ -6764,6 +7262,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6803,7 +7303,9 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
compiler=$CC
GCC=$ac_cv_fc_compiler_gnu
@@ -6859,7 +7361,8 @@
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
fi # test "$_lt_disable_FC" != yes
AC_LANG_POP
@@ -6896,10 +7399,12 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)="$LD"
@@ -6909,6 +7414,8 @@
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -6928,7 +7435,8 @@
AC_LANG_RESTORE
GCC=$lt_save_GCC
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG
@@ -6963,9 +7471,11 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
+CFLAGS=
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -6978,7 +7488,8 @@
GCC=$lt_save_GCC
AC_LANG_RESTORE
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_RC_CONFIG
@@ -7037,6 +7548,15 @@
AC_SUBST([OBJDUMP])
])
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
# _LT_DECL_SED
# ------------
@@ -7130,8 +7650,8 @@
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, \
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
&& eval 'test $(( 1 + 1 )) -eq 2 \
&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
@@ -7170,208 +7690,162 @@
])# _LT_CHECK_SHELL_FEATURES
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
-}
-# func_basename file
-func_basename ()
-{
- func_basename_result="${1##*/}"
-}
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac])
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"
-}
+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+ func_basename_result="${1##*/}"])
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}
-}
+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"])
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=${1%%=*}
- func_opt_split_arg=${1#*=}
-}
+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}])
-# func_lo2o object
-func_lo2o ()
-{
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac
-}
+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+ func_split_long_opt_name=${1%%=*}
+ func_split_long_opt_arg=${1#*=}])
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=${1%.*}.lo
-}
+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=$(( $[*] ))
-}
+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac])
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=${#1}
-}
+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-_LT_EOF
- ;;
- *) # Bourne compatible functions.
- cat << \_LT_EOF >> "$cfgfile"
+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-}
+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
+fi
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
+if test x"$lt_shell_append" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-dnl func_dirname_and_basename
-dnl A portable version of this function is already defined in general.m4sh
-dnl so there is no need for it here.
+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
- esac
-}
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
-# sed scripts:
-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[[^=]]*=//'
+if test x"$_lt_function_replace_fail" = x":"; then
+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "$[@]"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
-case $lt_shell_append in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$[1]+=\$[2]"
-}
-_LT_EOF
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
;;
- *)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$[1]=\$$[1]\$[2]"
-}
-
-_LT_EOF
- ;;
- esac
+esac
])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
Modified: lighttpd/trunk/m4/ltoptions.m4
===================================================================
--- lighttpd/trunk/m4/ltoptions.m4 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/m4/ltoptions.m4 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,13 +1,14 @@
# Helper functions for option handling. -*- Autoconf -*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 6 ltoptions.m4
+# serial 7 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -125,7 +126,7 @@
[enable_win32_dll=yes
case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -133,13 +134,13 @@
esac
test -z "$AS" && AS=as
-_LT_DECL([], [AS], [0], [Assembler program])dnl
+_LT_DECL([], [AS], [1], [Assembler program])dnl
test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
])# win32-dll
AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
Modified: lighttpd/trunk/m4/ltversion.m4
===================================================================
--- lighttpd/trunk/m4/ltversion.m4 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/m4/ltversion.m4 2011-07-03 23:55:35 UTC (rev 544)
@@ -7,17 +7,17 @@
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# Generated from ltversion.in.
+# @configure_input@
-# serial 3017 ltversion.m4
+# serial 3293 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.2.6b])
-m4_define([LT_PACKAGE_REVISION], [1.3017])
+m4_define([LT_PACKAGE_VERSION], [2.4])
+m4_define([LT_PACKAGE_REVISION], [1.3293])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.6b'
-macro_revision='1.3017'
+[macro_version='2.4'
+macro_revision='1.3293'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
Modified: lighttpd/trunk/m4/lt~obsolete.m4
===================================================================
--- lighttpd/trunk/m4/lt~obsolete.m4 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/m4/lt~obsolete.m4 2011-07-03 23:55:35 UTC (rev 544)
@@ -1,13 +1,13 @@
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 4 lt~obsolete.m4
+# serial 5 lt~obsolete.m4
# These exist entirely to fool aclocal when bootstrapping libtool.
#
@@ -77,7 +77,6 @@
m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
@@ -90,3 +89,10 @@
m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
Modified: lighttpd/trunk/src/Makefile.am
===================================================================
--- lighttpd/trunk/src/Makefile.am 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/Makefile.am 2011-07-03 23:55:35 UTC (rev 544)
@@ -64,7 +64,8 @@
data_integer.c md5.c data_fastcgi.c \
fdevent_select.c fdevent_libev.c \
fdevent_poll.c fdevent_linux_sysepoll.c \
- fdevent_solaris_devpoll.c fdevent_freebsd_kqueue.c \
+ fdevent_solaris_devpoll.c fdevent_solaris_port.c \
+ fdevent_freebsd_kqueue.c \
data_config.c bitset.c \
inet_ntop_cache.c crc32.c \
connections-glue.c \
Modified: lighttpd/trunk/src/Makefile.in
===================================================================
--- lighttpd/trunk/src/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -92,12 +92,12 @@
data_array.c data_integer.c md5.c data_fastcgi.c \
fdevent_select.c fdevent_libev.c fdevent_poll.c \
fdevent_linux_sysepoll.c fdevent_solaris_devpoll.c \
- fdevent_freebsd_kqueue.c data_config.c bitset.c \
- inet_ntop_cache.c crc32.c connections-glue.c configfile-glue.c \
- http-header-glue.c network_write.c network_linux_sendfile.c \
- network_freebsd_sendfile.c network_writev.c \
- network_solaris_sendfilev.c network_openssl.c splaytree.c \
- status_counter.c
+ fdevent_solaris_port.c fdevent_freebsd_kqueue.c data_config.c \
+ bitset.c inet_ntop_cache.c crc32.c connections-glue.c \
+ configfile-glue.c http-header-glue.c network_write.c \
+ network_linux_sendfile.c network_freebsd_sendfile.c \
+ network_writev.c network_solaris_sendfilev.c network_openssl.c \
+ splaytree.c status_counter.c
am__objects_1 = liblightcomp_la-buffer.lo liblightcomp_la-log.lo \
liblightcomp_la-keyvalue.lo liblightcomp_la-chunk.lo \
liblightcomp_la-http_chunk.lo liblightcomp_la-stream.lo \
@@ -112,6 +112,7 @@
liblightcomp_la-fdevent_poll.lo \
liblightcomp_la-fdevent_linux_sysepoll.lo \
liblightcomp_la-fdevent_solaris_devpoll.lo \
+ liblightcomp_la-fdevent_solaris_port.lo \
liblightcomp_la-fdevent_freebsd_kqueue.lo \
liblightcomp_la-data_config.lo liblightcomp_la-bitset.lo \
liblightcomp_la-inet_ntop_cache.lo liblightcomp_la-crc32.lo \
@@ -372,12 +373,12 @@
data_string.c data_count.c data_array.c data_integer.c md5.c \
data_fastcgi.c fdevent_select.c fdevent_libev.c fdevent_poll.c \
fdevent_linux_sysepoll.c fdevent_solaris_devpoll.c \
- fdevent_freebsd_kqueue.c data_config.c bitset.c \
- inet_ntop_cache.c crc32.c connections-glue.c configfile-glue.c \
- http-header-glue.c network_write.c network_linux_sendfile.c \
- network_freebsd_sendfile.c network_writev.c \
- network_solaris_sendfilev.c network_openssl.c splaytree.c \
- status_counter.c
+ fdevent_solaris_port.c fdevent_freebsd_kqueue.c data_config.c \
+ bitset.c inet_ntop_cache.c crc32.c connections-glue.c \
+ configfile-glue.c http-header-glue.c network_write.c \
+ network_linux_sendfile.c network_freebsd_sendfile.c \
+ network_writev.c network_solaris_sendfilev.c network_openssl.c \
+ splaytree.c status_counter.c
am__objects_2 = buffer.$(OBJEXT) log.$(OBJEXT) keyvalue.$(OBJEXT) \
chunk.$(OBJEXT) http_chunk.$(OBJEXT) stream.$(OBJEXT) \
fdevent.$(OBJEXT) stat_cache.$(OBJEXT) plugin.$(OBJEXT) \
@@ -388,6 +389,7 @@
fdevent_libev.$(OBJEXT) fdevent_poll.$(OBJEXT) \
fdevent_linux_sysepoll.$(OBJEXT) \
fdevent_solaris_devpoll.$(OBJEXT) \
+ fdevent_solaris_port.$(OBJEXT) \
fdevent_freebsd_kqueue.$(OBJEXT) data_config.$(OBJEXT) \
bitset.$(OBJEXT) inet_ntop_cache.$(OBJEXT) crc32.$(OBJEXT) \
connections-glue.$(OBJEXT) configfile-glue.$(OBJEXT) \
@@ -503,6 +505,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@ -DHAVE_VERSION_H -DLIBRARY_DIR="\"$(libdir)\"" -DSBIN_DIR="\"$(sbindir)\""
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -536,6 +539,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -579,6 +583,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -611,7 +616,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -646,7 +650,8 @@
data_integer.c md5.c data_fastcgi.c \
fdevent_select.c fdevent_libev.c \
fdevent_poll.c fdevent_linux_sysepoll.c \
- fdevent_solaris_devpoll.c fdevent_freebsd_kqueue.c \
+ fdevent_solaris_devpoll.c fdevent_solaris_port.c \
+ fdevent_freebsd_kqueue.c \
data_config.c bitset.c \
inet_ntop_cache.c crc32.c \
connections-glue.c \
@@ -1042,6 +1047,7 @@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/fdevent_poll.Po at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/fdevent_select.Po at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/fdevent_solaris_devpoll.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/fdevent_solaris_port.Po at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/http-header-glue.Po at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/http_auth.Plo at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/http_auth_digest.Plo at am__quote@
@@ -1071,6 +1077,7 @@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/liblightcomp_la-fdevent_poll.Plo at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/liblightcomp_la-fdevent_select.Plo at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/liblightcomp_la-fdevent_solaris_devpoll.Plo at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/liblightcomp_la-fdevent_solaris_port.Plo at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/liblightcomp_la-http-header-glue.Plo at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/liblightcomp_la-http_chunk.Plo at am__quote@
@AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/liblightcomp_la-inet_ntop_cache.Plo at am__quote@
@@ -1356,6 +1363,14 @@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblightcomp_la_CFLAGS) $(CFLAGS) -c -o liblightcomp_la-fdevent_solaris_devpoll.lo `test -f 'fdevent_solaris_devpoll.c' || echo '$(srcdir)/'`fdevent_solaris_devpoll.c
+liblightcomp_la-fdevent_solaris_port.lo: fdevent_solaris_port.c
+ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblightcomp_la_CFLAGS) $(CFLAGS) -MT liblightcomp_la-fdevent_solaris_port.lo -MD -MP -MF $(DEPDIR)/liblightcomp_la-fdevent_solaris_port.Tpo -c -o liblightcomp_la-fdevent_solaris_port.lo `test -f 'fdevent_solaris_port.c' || echo '$(srcdir)/'`fdevent_solaris_port.c
+ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblightcomp_la-fdevent_solaris_port.Tpo $(DEPDIR)/liblightcomp_la-fdevent_solaris_port.Plo
+ at am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fdevent_solaris_port.c' object='liblightcomp_la-fdevent_solaris_port.lo' libtool=yes @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblightcomp_la_CFLAGS) $(CFLAGS) -c -o liblightcomp_la-fdevent_solaris_port.lo `test -f 'fdevent_solaris_port.c' || echo '$(srcdir)/'`fdevent_solaris_port.c
+
liblightcomp_la-fdevent_freebsd_kqueue.lo: fdevent_freebsd_kqueue.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liblightcomp_la_CFLAGS) $(CFLAGS) -MT liblightcomp_la-fdevent_freebsd_kqueue.lo -MD -MP -MF $(DEPDIR)/liblightcomp_la-fdevent_freebsd_kqueue.Tpo -c -o liblightcomp_la-fdevent_freebsd_kqueue.lo `test -f 'fdevent_freebsd_kqueue.c' || echo '$(srcdir)/'`fdevent_freebsd_kqueue.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/liblightcomp_la-fdevent_freebsd_kqueue.Tpo $(DEPDIR)/liblightcomp_la-fdevent_freebsd_kqueue.Plo
Modified: lighttpd/trunk/src/base.h
===================================================================
--- lighttpd/trunk/src/base.h 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/base.h 2011-07-03 23:55:35 UTC (rev 544)
@@ -275,7 +275,10 @@
buffer *ssl_pemfile;
buffer *ssl_ca_file;
buffer *ssl_cipher_list;
+ buffer *ssl_dh_file;
+ buffer *ssl_ec_curve;
unsigned short ssl_use_sslv2;
+ unsigned short ssl_use_sslv3;
unsigned short ssl_verifyclient;
unsigned short ssl_verifyclient_enforce;
unsigned short ssl_verifyclient_depth;
@@ -527,7 +530,10 @@
buffer *ssl_pemfile;
buffer *ssl_ca_file;
buffer *ssl_cipher_list;
+ buffer *ssl_dh_file;
+ buffer *ssl_ec_curve;
unsigned short ssl_use_sslv2;
+ unsigned short ssl_use_sslv3;
unsigned short use_ipv6;
unsigned short is_ssl;
Modified: lighttpd/trunk/src/configfile.c
===================================================================
--- lighttpd/trunk/src/configfile.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/configfile.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -102,6 +102,9 @@
{ "ssl.verifyclient.exportcert", NULL, T_CONFIG_BOOLEAN, T_CONFIG_SCOPE_SERVER }, /* 60 */
{ "server.set-v6only", NULL, T_CONFIG_BOOLEAN, T_CONFIG_SCOPE_CONNECTION }, /* 61 */
+ { "ssl.use-sslv3", NULL, T_CONFIG_BOOLEAN, T_CONFIG_SCOPE_SERVER }, /* 62 */
+ { "ssl.dh-file", NULL, T_CONFIG_STRING, T_CONFIG_SCOPE_SERVER }, /* 63 */
+ { "ssl.ec-curve", NULL, T_CONFIG_STRING, T_CONFIG_SCOPE_SERVER }, /* 64 */
{ "server.host", "use server.bind instead", T_CONFIG_DEPRECATED, T_CONFIG_SCOPE_UNSET },
{ "server.docroot", "use server.document-root instead", T_CONFIG_DEPRECATED, T_CONFIG_SCOPE_UNSET },
@@ -164,6 +167,8 @@
s->error_handler = buffer_init();
s->server_tag = buffer_init();
s->ssl_cipher_list = buffer_init();
+ s->ssl_dh_file = buffer_init();
+ s->ssl_ec_curve = buffer_init();
s->errorfile_prefix = buffer_init();
s->max_keep_alive_requests = 16;
s->max_keep_alive_idle = 5;
@@ -172,6 +177,7 @@
s->use_xattr = 0;
s->is_ssl = 0;
s->ssl_use_sslv2 = 0;
+ s->ssl_use_sslv3 = 1;
s->use_ipv6 = 0;
s->set_v6only = 1;
s->defer_accept = 0;
@@ -236,6 +242,9 @@
cv[47].destination = s->ssl_cipher_list;
cv[48].destination = &(s->ssl_use_sslv2);
+ cv[62].destination = &(s->ssl_use_sslv3);
+ cv[63].destination = s->ssl_dh_file;
+ cv[64].destination = s->ssl_ec_curve;
cv[49].destination = &(s->etag_use_inode);
cv[50].destination = &(s->etag_use_mtime);
cv[51].destination = &(s->etag_use_size);
@@ -324,7 +333,10 @@
#endif
PATCH(ssl_ca_file);
PATCH(ssl_cipher_list);
+ PATCH(ssl_dh_file);
+ PATCH(ssl_ec_curve);
PATCH(ssl_use_sslv2);
+ PATCH(ssl_use_sslv3);
PATCH(etag_use_inode);
PATCH(etag_use_mtime);
PATCH(etag_use_size);
@@ -390,10 +402,16 @@
PATCH(ssl_ca_file);
} else if (buffer_is_equal_string(du->key, CONST_STR_LEN("ssl.use-sslv2"))) {
PATCH(ssl_use_sslv2);
+ } else if (buffer_is_equal_string(du->key, CONST_STR_LEN("ssl.use-sslv3"))) {
+ PATCH(ssl_use_sslv3);
} else if (buffer_is_equal_string(du->key, CONST_STR_LEN("ssl.cipher-list"))) {
PATCH(ssl_cipher_list);
} else if (buffer_is_equal_string(du->key, CONST_STR_LEN("ssl.engine"))) {
PATCH(is_ssl);
+ } else if (buffer_is_equal_string(du->key, CONST_STR_LEN("ssl.dh-file"))) {
+ PATCH(ssl_dh_file);
+ } else if (buffer_is_equal_string(du->key, CONST_STR_LEN("ssl.ec-curve"))) {
+ PATCH(ssl_ec_curve);
#ifdef HAVE_LSTAT
} else if (buffer_is_equal_string(du->key, CONST_STR_LEN("server.follow-symlink"))) {
PATCH(follow_symlink);
@@ -1194,6 +1212,9 @@
#ifdef USE_SOLARIS_DEVPOLL
{ FDEVENT_HANDLER_SOLARIS_DEVPOLL,"solaris-devpoll" },
#endif
+#ifdef USE_SOLARIS_PORT
+ { FDEVENT_HANDLER_SOLARIS_PORT, "solaris-eventports" },
+#endif
#ifdef USE_FREEBSD_KQUEUE
{ FDEVENT_HANDLER_FREEBSD_KQUEUE, "freebsd-kqueue" },
{ FDEVENT_HANDLER_FREEBSD_KQUEUE, "kqueue" },
Modified: lighttpd/trunk/src/connections.c
===================================================================
--- lighttpd/trunk/src/connections.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/connections.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -1224,7 +1224,8 @@
}
} else if (revents & FDEVENT_ERR) {
-#ifndef USE_LINUX_SIGIO
+ /* error, connection reset, whatever... we don't want to spam the logfile */
+#if 0
log_error_write(srv, __FILE__, __LINE__, "sd",
"connection closed: poll() -> ERR", con->fd);
#endif
Modified: lighttpd/trunk/src/fdevent.c
===================================================================
--- lighttpd/trunk/src/fdevent.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/fdevent.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -50,6 +50,13 @@
return NULL;
}
return ev;
+ case FDEVENT_HANDLER_SOLARIS_PORT:
+ if (0 != fdevent_solaris_port_init(ev)) {
+ log_error_write(ev->srv, __FILE__, __LINE__, "S",
+ "event-handler solaris-eventports failed, try to set server.event-handler = \"poll\" or \"select\"");
+ return NULL;
+ }
+ return ev;
case FDEVENT_HANDLER_FREEBSD_KQUEUE:
if (0 != fdevent_freebsd_kqueue_init(ev)) {
log_error_write(ev->srv, __FILE__, __LINE__, "S",
Modified: lighttpd/trunk/src/fdevent.h
===================================================================
--- lighttpd/trunk/src/fdevent.h 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/fdevent.h 2011-07-03 23:55:35 UTC (rev 544)
@@ -49,16 +49,16 @@
# include <sys/devpoll.h>
#endif
+#if defined HAVE_PORT_H && defined HAVE_PORT_CREATE && defined(__sun)
+# define USE_SOLARIS_PORT
+# include <port.h>
+#endif
+
#if defined HAVE_SYS_EVENT_H && defined HAVE_KQUEUE
# define USE_FREEBSD_KQUEUE
# include <sys/event.h>
#endif
-#if defined HAVE_SYS_PORT_H && defined HAVE_PORT_CREATE
-# define USE_SOLARIS_PORT
-# include <sys/port.h>
-#endif
-
#if defined HAVE_LIBEV
# define USE_LIBEV
# include <ev.h>
@@ -90,6 +90,7 @@
FDEVENT_HANDLER_POLL,
FDEVENT_HANDLER_LINUX_SYSEPOLL,
FDEVENT_HANDLER_SOLARIS_DEVPOLL,
+ FDEVENT_HANDLER_SOLARIS_PORT,
FDEVENT_HANDLER_FREEBSD_KQUEUE,
FDEVENT_HANDLER_LIBEV
} fdevent_handler_t;
@@ -153,6 +154,9 @@
int devpoll_fd;
struct pollfd *devpollfds;
#endif
+#ifdef USE_SOLARIS_PORT
+ port_event_t *port_events;
+#endif
#ifdef USE_FREEBSD_KQUEUE
int kq_fd;
struct kevent *kq_results;
@@ -202,6 +206,7 @@
int fdevent_poll_init(fdevents *ev);
int fdevent_linux_sysepoll_init(fdevents *ev);
int fdevent_solaris_devpoll_init(fdevents *ev);
+int fdevent_solaris_port_init(fdevents *ev);
int fdevent_freebsd_kqueue_init(fdevents *ev);
int fdevent_libev_init(fdevents *ev);
Copied: lighttpd/trunk/src/fdevent_solaris_port.c (from rev 543, lighttpd/branches/upstream/current/src/fdevent_solaris_port.c)
===================================================================
--- lighttpd/trunk/src/fdevent_solaris_port.c (rev 0)
+++ lighttpd/trunk/src/fdevent_solaris_port.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -0,0 +1,172 @@
+#include "fdevent.h"
+#include "buffer.h"
+#include "log.h"
+
+#include <sys/types.h>
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+
+#ifdef USE_SOLARIS_PORT
+
+static const int SOLARIS_PORT_POLL_READ = POLLIN;
+static const int SOLARIS_PORT_POLL_WRITE = POLLOUT;
+static const int SOLARIS_PORT_POLL_READ_WRITE = POLLIN & POLLOUT;
+
+static int fdevent_solaris_port_event_del(fdevents *ev, int fde_ndx, int fd) {
+ if (fde_ndx < 0) return -1;
+
+ if (0 != port_dissociate(ev->port_fd, PORT_SOURCE_FD, fd)) {
+ log_error_write(ev->srv, __FILE__, __LINE__, "SSS",
+ "port_dissociate failed: ", strerror(errno), ", dying");
+
+ SEGFAULT();
+
+ return 0;
+ }
+
+ return -1;
+}
+
+static int fdevent_solaris_port_event_set(fdevents *ev, int fde_ndx, int fd, int events) {
+ const int* user_data = NULL;
+
+ if ((events & FDEVENT_IN) && (events & FDEVENT_OUT)) {
+ user_data = &SOLARIS_PORT_POLL_READ_WRITE;
+ } else if (events & FDEVENT_IN) {
+ user_data = &SOLARIS_PORT_POLL_READ;
+ } else if (events & FDEVENT_OUT) {
+ user_data = &SOLARIS_PORT_POLL_WRITE;
+ }
+
+ if (0 != port_associate(ev->port_fd, PORT_SOURCE_FD, fd, *user_data, (void*) user_data)) {
+ log_error_write(ev->srv, __FILE__, __LINE__, "SSS",
+ "port_associate failed: ", strerror(errno), ", dying");
+
+ SEGFAULT();
+
+ return 0;
+ }
+
+ return fd;
+}
+
+static int fdevent_solaris_port_event_get_revent(fdevents *ev, size_t ndx) {
+ int events = 0, e;
+
+ e = ev->port_events[ndx].portev_events;
+ if (e & POLLIN) events |= FDEVENT_IN;
+ if (e & POLLOUT) events |= FDEVENT_OUT;
+ if (e & POLLERR) events |= FDEVENT_ERR;
+ if (e & POLLHUP) events |= FDEVENT_HUP;
+ if (e & POLLPRI) events |= FDEVENT_PRI;
+ if (e & POLLNVAL) events |= FDEVENT_NVAL;
+
+ return e;
+}
+
+static int fdevent_solaris_port_event_get_fd(fdevents *ev, size_t ndx) {
+ return ev->port_events[ndx].portev_object;
+}
+
+static int fdevent_solaris_port_event_next_fdndx(fdevents *ev, int ndx) {
+ size_t i;
+
+ UNUSED(ev);
+
+ i = (ndx < 0) ? 0 : ndx + 1;
+
+ return i;
+}
+
+static void fdevent_solaris_port_free(fdevents *ev) {
+ close(ev->port_fd);
+ free(ev->port_events);
+}
+
+/* if there is any error it will return the return values of port_getn, otherwise it will return number of events **/
+static int fdevent_solaris_port_poll(fdevents *ev, int timeout_ms) {
+ int i = 0;
+ int ret;
+ unsigned int available_events, wait_for_events = 0;
+ const int *user_data;
+
+ struct timespec timeout;
+
+ timeout.tv_sec = timeout_ms/1000L;
+ timeout.tv_nsec = (timeout_ms % 1000L) * 1000000L;
+
+ /* get the number of file descriptors with events */
+ if ((ret = port_getn(ev->port_fd, ev->port_events, 0, &wait_for_events, &timeout)) < 0) return ret;
+
+ /* wait for at least one event */
+ if (0 == wait_for_events) wait_for_events = 1;
+
+ available_events = wait_for_events;
+
+ /* get the events of the file descriptors */
+ if ((ret = port_getn(ev->port_fd, ev->port_events, ev->maxfds, &available_events, &timeout)) < 0) {
+ /* if errno == ETIME and available_event == wait_for_events we didn't get any events */
+ /* for other errors we didn't get any events either */
+ if (!(errno == ETIME && wait_for_events != available_events)) return ret;
+ }
+
+ for (i = 0; i < available_events; ++i) {
+ user_data = (const int *) ev->port_events[i].portev_user;
+
+ if ((ret = port_associate(ev->port_fd, PORT_SOURCE_FD, ev->port_events[i].portev_object,
+ *user_data, (void*) user_data)) < 0) {
+ log_error_write(ev->srv, __FILE__, __LINE__, "SSS",
+ "port_associate failed: ", strerror(errno), ", dying");
+
+ SEGFAULT();
+
+ return 0;
+ }
+ }
+
+ return available_events;
+}
+
+int fdevent_solaris_port_init(fdevents *ev) {
+ ev->type = FDEVENT_HANDLER_SOLARIS_PORT;
+#define SET(x) \
+ ev->x = fdevent_solaris_port_##x;
+
+ SET(free);
+ SET(poll);
+
+ SET(event_del);
+ SET(event_set);
+
+ SET(event_next_fdndx);
+ SET(event_get_fd);
+ SET(event_get_revent);
+
+ if ((ev->port_fd = port_create()) < 0) {
+ log_error_write(ev->srv, __FILE__, __LINE__, "SSS",
+ "port_create() failed (", strerror(errno), "), try to set server.event-handler = \"poll\" or \"select\"");
+
+ return -1;
+ }
+
+ ev->port_events = malloc(ev->maxfds * sizeof(*ev->port_events));
+
+ return 0;
+}
+
+#else
+int fdevent_solaris_port_init(fdevents *ev) {
+ UNUSED(ev);
+
+ log_error_write(ev->srv, __FILE__, __LINE__, "S",
+ "solaris-eventports not supported, try to set server.event-handler = \"poll\" or \"select\"");
+
+ return -1;
+}
+#endif
Modified: lighttpd/trunk/src/http_auth.c
===================================================================
--- lighttpd/trunk/src/http_auth.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/http_auth.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -32,6 +32,12 @@
# include <openssl/md5.h>
#else
# include "md5.h"
+
+typedef li_MD5_CTX MD5_CTX;
+#define MD5_Init li_MD5_Init
+#define MD5_Update li_MD5_Update
+#define MD5_Final li_MD5_Final
+
#endif
/**
Modified: lighttpd/trunk/src/http_auth_digest.c
===================================================================
--- lighttpd/trunk/src/http_auth_digest.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/http_auth_digest.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -6,6 +6,12 @@
#ifndef USE_OPENSSL
# include "md5.h"
+
+typedef li_MD5_CTX MD5_CTX;
+#define MD5_Init li_MD5_Init
+#define MD5_Update li_MD5_Update
+#define MD5_Final li_MD5_Final
+
#endif
void CvtHex(IN HASH Bin, OUT HASHHEX Hex) {
Modified: lighttpd/trunk/src/md5.c
===================================================================
--- lighttpd/trunk/src/md5.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/md5.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -52,7 +52,7 @@
#define S43 15
#define S44 21
-static void MD5Transform (UINT4 [4], const unsigned char [64]);
+static void li_MD5Transform (UINT4 [4], const unsigned char [64]);
static void Encode (unsigned char *, UINT4 *, unsigned int);
static void Decode (UINT4 *, const unsigned char *, unsigned int);
@@ -110,8 +110,8 @@
/* MD5 initialization. Begins an MD5 operation, writing a new context.
*/
-void MD5_Init (context)
-MD5_CTX *context; /* context */
+void li_MD5_Init (context)
+li_MD5_CTX *context; /* context */
{
context->count[0] = context->count[1] = 0;
/* Load magic initialization constants.
@@ -126,8 +126,8 @@
operation, processing another message block, and updating the
context.
*/
-void MD5_Update (context, _input, inputLen)
-MD5_CTX *context; /* context */
+void li_MD5_Update (context, _input, inputLen)
+li_MD5_CTX *context; /* context */
const void *_input; /* input block */
unsigned int inputLen; /* length of input block */
{
@@ -151,10 +151,10 @@
if (inputLen >= partLen) {
MD5_memcpy
((POINTER)&context->buffer[ndx], (POINTER)input, partLen);
- MD5Transform (context->state, context->buffer);
+ li_MD5Transform (context->state, context->buffer);
for (i = partLen; i + 63 < inputLen; i += 64)
- MD5Transform (context->state, &input[i]);
+ li_MD5Transform (context->state, &input[i]);
ndx = 0;
}
@@ -170,9 +170,9 @@
/* MD5 finalization. Ends an MD5 message-digest operation, writing the
the message digest and zeroizing the context.
*/
-void MD5_Final (digest, context)
+void li_MD5_Final (digest, context)
unsigned char digest[16]; /* message digest */
-MD5_CTX *context; /* context */
+li_MD5_CTX *context; /* context */
{
unsigned char bits[8];
unsigned int ndx, padLen;
@@ -184,10 +184,10 @@
*/
ndx = (unsigned int)((context->count[0] >> 3) & 0x3f);
padLen = (ndx < 56) ? (56 - ndx) : (120 - ndx);
- MD5_Update (context, PADDING, padLen);
+ li_MD5_Update (context, PADDING, padLen);
/* Append length (before padding) */
- MD5_Update (context, bits, 8);
+ li_MD5_Update (context, bits, 8);
/* Store state in digest */
Encode (digest, context->state, 16);
@@ -199,7 +199,7 @@
/* MD5 basic transformation. Transforms state based on block.
*/
-static void MD5Transform (state, block)
+static void li_MD5Transform (state, block)
UINT4 state[4];
const unsigned char block[64];
{
Modified: lighttpd/trunk/src/md5.h
===================================================================
--- lighttpd/trunk/src/md5.h 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/md5.h 2011-07-03 23:55:35 UTC (rev 544)
@@ -39,9 +39,8 @@
UINT4 state[4]; /* state (ABCD) */
UINT4 count[2]; /* number of bits, modulo 2^64 (lsb first) */
unsigned char buffer[64]; /* input buffer */
-} MD5_CTX;
+} li_MD5_CTX;
-void MD5_Init (MD5_CTX *);
-void MD5_Update (MD5_CTX *, const void *, unsigned int);
-void MD5_Final (unsigned char [16], MD5_CTX *);
-
+void li_MD5_Init (li_MD5_CTX *);
+void li_MD5_Update (li_MD5_CTX *, const void *, unsigned int);
+void li_MD5_Final (unsigned char [16], li_MD5_CTX *);
Modified: lighttpd/trunk/src/mod_cgi.c
===================================================================
--- lighttpd/trunk/src/mod_cgi.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_cgi.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -341,8 +341,19 @@
while(1) {
int n;
+ int toread;
- buffer_prepare_copy(hctx->response, 1024);
+#if defined(__WIN32)
+ buffer_prepare_copy(hctx->response, 4 * 1024);
+#else
+ if (ioctl(con->fd, FIONREAD, &toread) || toread == 0 || toread <= 4*1024) {
+ buffer_prepare_copy(hctx->response, 4 * 1024);
+ } else {
+ if (toread > MAX_READ_LIMIT) toread = MAX_READ_LIMIT;
+ buffer_prepare_copy(hctx->response, toread + 1);
+ }
+#endif
+
if (-1 == (n = read(hctx->fd, hctx->response->ptr, hctx->response->size - 1))) {
if (errno == EAGAIN || errno == EINTR) {
/* would block, wait for signal */
@@ -917,7 +928,7 @@
cgi_env_add(&env, CONST_STR_LEN("CONTENT_LENGTH"), buf, strlen(buf));
cgi_env_add(&env, CONST_STR_LEN("SCRIPT_FILENAME"), CONST_BUF_LEN(con->physical.path));
cgi_env_add(&env, CONST_STR_LEN("SCRIPT_NAME"), CONST_BUF_LEN(con->uri.path));
- cgi_env_add(&env, CONST_STR_LEN("DOCUMENT_ROOT"), CONST_BUF_LEN(con->physical.doc_root));
+ cgi_env_add(&env, CONST_STR_LEN("DOCUMENT_ROOT"), CONST_BUF_LEN(con->physical.basedir));
/* for valgrind */
if (NULL != (s = getenv("LD_PRELOAD"))) {
Modified: lighttpd/trunk/src/mod_cml_funcs.c
===================================================================
--- lighttpd/trunk/src/mod_cml_funcs.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_cml_funcs.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -21,6 +21,12 @@
# include <openssl/md5.h>
#else
# include "md5.h"
+
+typedef li_MD5_CTX MD5_CTX;
+#define MD5_Init li_MD5_Init
+#define MD5_Update li_MD5_Update
+#define MD5_Final li_MD5_Final
+
#endif
#define HASHLEN 16
Modified: lighttpd/trunk/src/mod_cml_lua.c
===================================================================
--- lighttpd/trunk/src/mod_cml_lua.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_cml_lua.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -15,6 +15,12 @@
# include <openssl/md5.h>
#else
# include "md5.h"
+
+typedef li_MD5_CTX MD5_CTX;
+#define MD5_Init li_MD5_Init
+#define MD5_Update li_MD5_Update
+#define MD5_Final li_MD5_Final
+
#endif
#define HASHLEN 16
Modified: lighttpd/trunk/src/mod_fastcgi.c
===================================================================
--- lighttpd/trunk/src/mod_fastcgi.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_fastcgi.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -80,7 +80,6 @@
size_t load; /* number of requests waiting on this process */
- time_t last_used; /* see idle_timeout */
size_t requests; /* see max_requests */
struct fcgi_proc *prev, *next; /* see first */
@@ -1132,7 +1131,6 @@
/* register process */
proc->pid = child;
- proc->last_used = srv->cur_ts;
proc->is_local = 1;
break;
@@ -1970,7 +1968,7 @@
if (!buffer_is_empty(host->docroot)) {
buffer_copy_string_buffer(p->path, host->docroot);
} else {
- buffer_copy_string_buffer(p->path, con->physical.doc_root);
+ buffer_copy_string_buffer(p->path, con->physical.basedir);
}
buffer_append_string_buffer(p->path, con->request.pathinfo);
FCGI_ENV_ADD_CHECK(fcgi_env_add(p->fcgi_env, CONST_STR_LEN("PATH_TRANSLATED"), CONST_BUF_LEN(p->path)),con)
@@ -2010,7 +2008,7 @@
}
FCGI_ENV_ADD_CHECK(fcgi_env_add(p->fcgi_env, CONST_STR_LEN("SCRIPT_FILENAME"), CONST_BUF_LEN(p->path)),con)
- FCGI_ENV_ADD_CHECK(fcgi_env_add(p->fcgi_env, CONST_STR_LEN("DOCUMENT_ROOT"), CONST_BUF_LEN(con->physical.doc_root)),con)
+ FCGI_ENV_ADD_CHECK(fcgi_env_add(p->fcgi_env, CONST_STR_LEN("DOCUMENT_ROOT"), CONST_BUF_LEN(con->physical.basedir)),con)
}
if (host->strip_request_uri->used > 1) {
@@ -3047,7 +3045,6 @@
/* ok, we have the connection */
fcgi_proc_load_inc(srv, hctx);
- hctx->proc->last_used = srv->cur_ts;
hctx->got_proc = 1;
status_counter_inc(srv, CONST_STR_LEN("fastcgi.requests"));
@@ -3276,6 +3273,7 @@
*/
buffer_copy_string_buffer(con->physical.doc_root, host->docroot);
+ buffer_copy_string_buffer(con->physical.basedir, host->docroot);
buffer_copy_string_buffer(con->physical.path, host->docroot);
buffer_append_string_buffer(con->physical.path, con->uri.path);
Modified: lighttpd/trunk/src/mod_proxy.c
===================================================================
--- lighttpd/trunk/src/mod_proxy.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_proxy.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -724,9 +724,9 @@
con->file_started = 1;
if (blen) {
http_chunk_append_mem(srv, con, c + 4, blen + 1);
- joblist_append(srv, con);
}
hctx->response->used = 0;
+ joblist_append(srv, con);
}
} else {
http_chunk_append_mem(srv, con, hctx->response->ptr, hctx->response->used);
@@ -750,7 +750,6 @@
static handler_t proxy_write_request(server *srv, handler_ctx *hctx) {
data_proxy *host= hctx->host;
- plugin_data *p = hctx->plugin_data;
connection *con = hctx->remote_conn;
int ret;
@@ -759,6 +758,17 @@
(!host->host->used || !host->port)) return -1;
switch(hctx->state) {
+ case PROXY_STATE_CONNECT:
+ /* wait for the connect() to finish */
+
+ /* connect failed ? */
+ if (-1 == hctx->fde_ndx) return HANDLER_ERROR;
+
+ /* wait */
+ return HANDLER_WAIT_FOR_EVENT;
+
+ break;
+
case PROXY_STATE_INIT:
#if defined(HAVE_IPV6) && defined(HAVE_INET_PTON)
if (strstr(host->host->ptr,":")) {
@@ -786,58 +796,28 @@
return HANDLER_ERROR;
}
- /* fall through */
+ switch (proxy_establish_connection(srv, hctx)) {
+ case 1:
+ proxy_set_state(srv, hctx, PROXY_STATE_CONNECT);
- case PROXY_STATE_CONNECT:
- /* try to finish the connect() */
- if (hctx->state == PROXY_STATE_INIT) {
- /* first round */
- switch (proxy_establish_connection(srv, hctx)) {
- case 1:
- proxy_set_state(srv, hctx, PROXY_STATE_CONNECT);
+ /* connection is in progress, wait for an event and call getsockopt() below */
- /* connection is in progress, wait for an event and call getsockopt() below */
+ fdevent_event_set(srv->ev, &(hctx->fde_ndx), hctx->fd, FDEVENT_OUT);
- fdevent_event_set(srv->ev, &(hctx->fde_ndx), hctx->fd, FDEVENT_OUT);
+ return HANDLER_WAIT_FOR_EVENT;
+ case -1:
+ /* if ECONNREFUSED choose another connection -> FIXME */
+ hctx->fde_ndx = -1;
- return HANDLER_WAIT_FOR_EVENT;
- case -1:
- /* if ECONNREFUSED choose another connection -> FIXME */
- hctx->fde_ndx = -1;
-
- return HANDLER_ERROR;
- default:
- /* everything is ok, go on */
- break;
- }
- } else {
- int socket_error;
- socklen_t socket_error_len = sizeof(socket_error);
-
- /* we don't need it anymore */
- fdevent_event_del(srv->ev, &(hctx->fde_ndx), hctx->fd);
-
- /* try to finish the connect() */
- if (0 != getsockopt(hctx->fd, SOL_SOCKET, SO_ERROR, &socket_error, &socket_error_len)) {
- log_error_write(srv, __FILE__, __LINE__, "ss",
- "getsockopt failed:", strerror(errno));
-
- return HANDLER_ERROR;
- }
- if (socket_error != 0) {
- log_error_write(srv, __FILE__, __LINE__, "ss",
- "establishing connection failed:", strerror(socket_error),
- "port:", hctx->host->port);
-
- return HANDLER_ERROR;
- }
- if (p->conf.debug) {
- log_error_write(srv, __FILE__, __LINE__, "s", "proxy - connect - delayed success");
- }
+ return HANDLER_ERROR;
+ default:
+ /* everything is ok, go on */
+ proxy_set_state(srv, hctx, PROXY_STATE_PREPARE_WRITE);
+ break;
}
- proxy_set_state(srv, hctx, PROXY_STATE_PREPARE_WRITE);
/* fall through */
+
case PROXY_STATE_PREPARE_WRITE:
proxy_create_env(srv, hctx);
@@ -1019,11 +999,42 @@
"proxy: fdevent-out", hctx->state);
}
- if (hctx->state == PROXY_STATE_CONNECT ||
+ if (hctx->state == PROXY_STATE_CONNECT) {
+ int socket_error;
+ socklen_t socket_error_len = sizeof(socket_error);
+
+ /* we don't need it anymore */
+ fdevent_event_del(srv->ev, &(hctx->fde_ndx), hctx->fd);
+ hctx->fde_ndx = -1;
+
+ /* try to finish the connect() */
+ if (0 != getsockopt(hctx->fd, SOL_SOCKET, SO_ERROR, &socket_error, &socket_error_len)) {
+ log_error_write(srv, __FILE__, __LINE__, "ss",
+ "getsockopt failed:", strerror(errno));
+
+ joblist_append(srv, con);
+ return HANDLER_FINISHED;
+ }
+ if (socket_error != 0) {
+ log_error_write(srv, __FILE__, __LINE__, "ss",
+ "establishing connection failed:", strerror(socket_error),
+ "port:", hctx->host->port);
+
+ joblist_append(srv, con);
+ return HANDLER_FINISHED;
+ }
+ if (p->conf.debug) {
+ log_error_write(srv, __FILE__, __LINE__, "s", "proxy - connect - delayed success");
+ }
+
+ proxy_set_state(srv, hctx, PROXY_STATE_PREPARE_WRITE);
+ }
+
+ if (hctx->state == PROXY_STATE_PREPARE_WRITE ||
hctx->state == PROXY_STATE_WRITE) {
/* we are allowed to send something out
*
- * 1. in a unfinished connect() call
+ * 1. after a just finished connect() call
* 2. in a unfinished write() call (long POST request)
*/
return mod_proxy_handle_subrequest(srv, con, p);
Modified: lighttpd/trunk/src/mod_scgi.c
===================================================================
--- lighttpd/trunk/src/mod_scgi.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_scgi.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -1558,7 +1558,7 @@
if (!buffer_is_empty(host->docroot)) {
buffer_copy_string_buffer(p->path, host->docroot);
} else {
- buffer_copy_string_buffer(p->path, con->physical.doc_root);
+ buffer_copy_string_buffer(p->path, con->physical.basedir);
}
buffer_append_string_buffer(p->path, con->request.pathinfo);
scgi_env_add(p->scgi_env, CONST_STR_LEN("PATH_TRANSLATED"), CONST_BUF_LEN(p->path));
@@ -1589,7 +1589,7 @@
buffer_copy_string_buffer(p->path, con->physical.path);
scgi_env_add(p->scgi_env, CONST_STR_LEN("SCRIPT_FILENAME"), CONST_BUF_LEN(p->path));
- scgi_env_add(p->scgi_env, CONST_STR_LEN("DOCUMENT_ROOT"), CONST_BUF_LEN(con->physical.doc_root));
+ scgi_env_add(p->scgi_env, CONST_STR_LEN("DOCUMENT_ROOT"), CONST_BUF_LEN(con->physical.basedir));
}
scgi_env_add(p->scgi_env, CONST_STR_LEN("REQUEST_URI"), CONST_BUF_LEN(con->request.orig_uri));
if (!buffer_is_equal(con->request.uri, con->request.orig_uri)) {
Modified: lighttpd/trunk/src/mod_secure_download.c
===================================================================
--- lighttpd/trunk/src/mod_secure_download.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_secure_download.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -12,6 +12,12 @@
# include <openssl/md5.h>
#else
# include "md5.h"
+
+typedef li_MD5_CTX MD5_CTX;
+#define MD5_Init li_MD5_Init
+#define MD5_Update li_MD5_Update
+#define MD5_Final li_MD5_Final
+
#endif
#define HASHLEN 16
Modified: lighttpd/trunk/src/mod_status.c
===================================================================
--- lighttpd/trunk/src/mod_status.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_status.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -694,6 +694,9 @@
#ifdef USE_SOLARIS_DEVPOLL
{ FDEVENT_HANDLER_SOLARIS_DEVPOLL,"solaris-devpoll" },
#endif
+#ifdef USE_SOLARIS_PORT
+ { FDEVENT_HANDLER_SOLARIS_PORT, "solaris-eventports" },
+#endif
#ifdef USE_FREEBSD_KQUEUE
{ FDEVENT_HANDLER_FREEBSD_KQUEUE, "freebsd-kqueue" },
#endif
Modified: lighttpd/trunk/src/mod_usertrack.c
===================================================================
--- lighttpd/trunk/src/mod_usertrack.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/mod_usertrack.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -12,6 +12,12 @@
# include <openssl/md5.h>
#else
# include "md5.h"
+
+typedef li_MD5_CTX MD5_CTX;
+#define MD5_Init li_MD5_Init
+#define MD5_Update li_MD5_Update
+#define MD5_Final li_MD5_Final
+
#endif
/* plugin config for all request/connections */
Modified: lighttpd/trunk/src/network.c
===================================================================
--- lighttpd/trunk/src/network.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/network.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -479,6 +479,55 @@
size_t i;
network_backend_t backend;
+#if OPENSSL_VERSION_NUMBER >= 0x0090800fL
+ EC_KEY *ecdh;
+ int nid;
+#endif
+
+#ifdef USE_OPENSSL
+ DH *dh;
+ BIO *bio;
+
+ /* 1024-bit MODP Group with 160-bit prime order subgroup (RFC5114)
+ * -----BEGIN DH PARAMETERS-----
+ * MIIBDAKBgQCxC4+WoIDgHd6S3l6uXVTsUsmfvPsGo8aaap3KUtI7YWBz4oZ1oj0Y
+ * mDjvHi7mUsAT7LSuqQYRIySXXDzUm4O/rMvdfZDEvXCYSI6cIZpzck7/1vrlZEc4
+ * +qMaT/VbzMChUa9fDci0vUW/N982XBpl5oz9p21NpwjfH7K8LkpDcQKBgQCk0cvV
+ * w/00EmdlpELvuZkF+BBN0lisUH/WQGz/FCZtMSZv6h5cQVZLd35pD1UE8hMWAhe0
+ * sBuIal6RVH+eJ0n01/vX07mpLuGQnQ0iY/gKdqaiTAh6CR9THb8KAWm2oorWYqTR
+ * jnOvoy13nVkY0IvIhY9Nzvl8KiSFXm7rIrOy5QICAKA=
+ * -----END DH PARAMETERS-----
+ */
+
+ static const unsigned char dh1024_p[]={
+ 0xB1,0x0B,0x8F,0x96,0xA0,0x80,0xE0,0x1D,0xDE,0x92,0xDE,0x5E,
+ 0xAE,0x5D,0x54,0xEC,0x52,0xC9,0x9F,0xBC,0xFB,0x06,0xA3,0xC6,
+ 0x9A,0x6A,0x9D,0xCA,0x52,0xD2,0x3B,0x61,0x60,0x73,0xE2,0x86,
+ 0x75,0xA2,0x3D,0x18,0x98,0x38,0xEF,0x1E,0x2E,0xE6,0x52,0xC0,
+ 0x13,0xEC,0xB4,0xAE,0xA9,0x06,0x11,0x23,0x24,0x97,0x5C,0x3C,
+ 0xD4,0x9B,0x83,0xBF,0xAC,0xCB,0xDD,0x7D,0x90,0xC4,0xBD,0x70,
+ 0x98,0x48,0x8E,0x9C,0x21,0x9A,0x73,0x72,0x4E,0xFF,0xD6,0xFA,
+ 0xE5,0x64,0x47,0x38,0xFA,0xA3,0x1A,0x4F,0xF5,0x5B,0xCC,0xC0,
+ 0xA1,0x51,0xAF,0x5F,0x0D,0xC8,0xB4,0xBD,0x45,0xBF,0x37,0xDF,
+ 0x36,0x5C,0x1A,0x65,0xE6,0x8C,0xFD,0xA7,0x6D,0x4D,0xA7,0x08,
+ 0xDF,0x1F,0xB2,0xBC,0x2E,0x4A,0x43,0x71,
+ };
+
+ static const unsigned char dh1024_g[]={
+ 0xA4,0xD1,0xCB,0xD5,0xC3,0xFD,0x34,0x12,0x67,0x65,0xA4,0x42,
+ 0xEF,0xB9,0x99,0x05,0xF8,0x10,0x4D,0xD2,0x58,0xAC,0x50,0x7F,
+ 0xD6,0x40,0x6C,0xFF,0x14,0x26,0x6D,0x31,0x26,0x6F,0xEA,0x1E,
+ 0x5C,0x41,0x56,0x4B,0x77,0x7E,0x69,0x0F,0x55,0x04,0xF2,0x13,
+ 0x16,0x02,0x17,0xB4,0xB0,0x1B,0x88,0x6A,0x5E,0x91,0x54,0x7F,
+ 0x9E,0x27,0x49,0xF4,0xD7,0xFB,0xD7,0xD3,0xB9,0xA9,0x2E,0xE1,
+ 0x90,0x9D,0x0D,0x22,0x63,0xF8,0x0A,0x76,0xA6,0xA2,0x4C,0x08,
+ 0x7A,0x09,0x1F,0x53,0x1D,0xBF,0x0A,0x01,0x69,0xB6,0xA2,0x8A,
+ 0xD6,0x62,0xA4,0xD1,0x8E,0x73,0xAF,0xA3,0x2D,0x77,0x9D,0x59,
+ 0x18,0xD0,0x8B,0xC8,0x85,0x8F,0x4D,0xCE,0xF9,0x7C,0x2A,0x24,
+ 0x85,0x5E,0x6E,0xEB,0x22,0xB3,0xB2,0xE5,
+ };
+#endif
+
struct nb_map {
network_backend_t nb;
const char *name;
@@ -521,6 +570,7 @@
if (srv->ssl_is_init == 0) {
SSL_load_error_strings();
SSL_library_init();
+ OpenSSL_add_all_algorithms();
srv->ssl_is_init = 1;
if (0 == RAND_status()) {
@@ -545,6 +595,15 @@
}
}
+ if (!s->ssl_use_sslv3) {
+ /* disable SSLv3 */
+ if (!(SSL_OP_NO_SSLv3 & SSL_CTX_set_options(s->ssl_ctx, SSL_OP_NO_SSLv3))) {
+ log_error_write(srv, __FILE__, __LINE__, "ss", "SSL:",
+ ERR_error_string(ERR_get_error(), NULL));
+ return -1;
+ }
+ }
+
if (!buffer_is_empty(s->ssl_cipher_list)) {
/* Disable support for low encryption ciphers */
if (SSL_CTX_set_cipher_list(s->ssl_ctx, s->ssl_cipher_list->ptr) != 1) {
@@ -554,6 +613,65 @@
}
}
+ /* Support for Diffie-Hellman key exchange */
+ if (!buffer_is_empty(s->ssl_dh_file)) {
+ /* DH parameters from file */
+ bio = BIO_new_file((char *) s->ssl_dh_file->ptr, "r");
+ if (bio == NULL) {
+ log_error_write(srv, __FILE__, __LINE__, "ss", "SSL: Unable to open file", s->ssl_dh_file->ptr);
+ return -1;
+ }
+ dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL);
+ BIO_free(bio);
+ if (dh == NULL) {
+ log_error_write(srv, __FILE__, __LINE__, "ss", "SSL: PEM_read_bio_DHparams failed", s->ssl_dh_file->ptr);
+ return -1;
+ }
+ } else {
+ /* Default DH parameters from RFC5114 */
+ dh = DH_new();
+ if (dh == NULL) {
+ log_error_write(srv, __FILE__, __LINE__, "s", "SSL: DH_new () failed");
+ return -1;
+ }
+ dh->p = BN_bin2bn(dh1024_p,sizeof(dh1024_p), NULL);
+ dh->g = BN_bin2bn(dh1024_g,sizeof(dh1024_g), NULL);
+ dh->length = 160;
+ if ((dh->p == NULL) || (dh->g == NULL)) {
+ DH_free(dh);
+ log_error_write(srv, __FILE__, __LINE__, "s", "SSL: BN_bin2bn () failed");
+ return -1;
+ }
+ }
+ SSL_CTX_set_tmp_dh(s->ssl_ctx,dh);
+ SSL_CTX_set_options(s->ssl_ctx,SSL_OP_SINGLE_DH_USE);
+ DH_free(dh);
+
+#if OPENSSL_VERSION_NUMBER >= 0x0090800fL
+#ifndef OPENSSL_NO_ECDH
+ /* Support for Elliptic-Curve Diffie-Hellman key exchange */
+ if (!buffer_is_empty(s->ssl_ec_curve)) {
+ /* OpenSSL only supports the "named curves" from RFC 4492, section 5.1.1. */
+ nid = OBJ_sn2nid((char *) s->ssl_ec_curve->ptr);
+ if (nid == 0) {
+ log_error_write(srv, __FILE__, __LINE__, "ss", "SSL: Unknown curve name", s->ssl_ec_curve->ptr);
+ return -1;
+ }
+ } else {
+ /* Default curve */
+ nid = OBJ_sn2nid("prime256v1");
+ }
+ ecdh = EC_KEY_new_by_curve_name(nid);
+ if (ecdh == NULL) {
+ log_error_write(srv, __FILE__, __LINE__, "ss", "SSL: Unable to create curve", s->ssl_ec_curve->ptr);
+ return -1;
+ }
+ SSL_CTX_set_tmp_ecdh(s->ssl_ctx,ecdh);
+ SSL_CTX_set_options(s->ssl_ctx,SSL_OP_SINGLE_ECDH_USE);
+ EC_KEY_free(ecdh);
+#endif
+#endif
+
if (!buffer_is_empty(s->ssl_ca_file)) {
if (1 != SSL_CTX_load_verify_locations(s->ssl_ctx, s->ssl_ca_file->ptr, NULL)) {
log_error_write(srv, __FILE__, __LINE__, "ssb", "SSL:",
Modified: lighttpd/trunk/src/proc_open.c
===================================================================
--- lighttpd/trunk/src/proc_open.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/proc_open.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -3,6 +3,7 @@
#include <stdlib.h>
#include <stdio.h>
#include <ctype.h>
+#include <string.h>
#include <errno.h>
#ifdef WIN32
@@ -257,6 +258,7 @@
proc_close_parents(proc);
execl(shell, shell, "-c", command, (char *)NULL);
+ fprintf(stderr, "failed to execute shell: %s -c %s: %s\n", shell, command, strerror(errno));
_exit(127);
} else if (child < 0) {
Modified: lighttpd/trunk/src/server.c
===================================================================
--- lighttpd/trunk/src/server.c 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/src/server.c 2011-07-03 23:55:35 UTC (rev 544)
@@ -306,6 +306,8 @@
buffer_free(s->ssl_pemfile);
buffer_free(s->ssl_ca_file);
buffer_free(s->ssl_cipher_list);
+ buffer_free(s->ssl_dh_file);
+ buffer_free(s->ssl_ec_curve);
buffer_free(s->error_handler);
buffer_free(s->errorfile_prefix);
array_free(s->mimetypes);
@@ -391,6 +393,11 @@
#else
"\t- /dev/poll (Solaris)\n"
#endif
+#ifdef USE_SOLARIS_PORT
+ "\t+ eventports (Solaris)\n"
+#else
+ "\t- eventports (Solaris)\n"
+#endif
#ifdef USE_FREEBSD_KQUEUE
"\t+ kqueue (FreeBSD)\n"
#else
Modified: lighttpd/trunk/tests/Makefile.in
===================================================================
--- lighttpd/trunk/tests/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -152,6 +152,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -185,6 +186,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -228,6 +230,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -260,7 +263,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/tests/condition.conf
===================================================================
--- lighttpd/trunk/tests/condition.conf 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/condition.conf 2011-07-03 23:55:35 UTC (rev 544)
@@ -57,3 +57,13 @@
url.redirect = ("^" => "/match_5")
}
}
+
+else $HTTP["host"] == "test4.example.org" {
+ server.document-root = env.SRCDIR + "/tmp/lighttpd/servers/www.example.org/pages/"
+ server.name = "test4.example.org"
+ url.redirect = ("^" => "/match_6")
+
+ $HTTP["url"] =~ "^/subdir/" {
+ url.redirect = ("^" => "/match_7")
+ }
+}
Modified: lighttpd/trunk/tests/core-condition.t
===================================================================
--- lighttpd/trunk/tests/core-condition.t 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/core-condition.t 2011-07-03 23:55:35 UTC (rev 544)
@@ -8,7 +8,7 @@
use strict;
use IO::Socket;
-use Test::More tests => 17;
+use Test::More tests => 19;
use LightyTest;
my $tf = LightyTest->new();
@@ -49,6 +49,22 @@
$t->{RESPONSE} = [ { 'HTTP-Protocol' => 'HTTP/1.0', 'HTTP-Status' => 301, 'Location' => "/match_5" } ];
ok($tf->handle_http($t) == 0, 'nesting');
+$t->{REQUEST} = ( <<EOF
+GET /subdir/index.html HTTP/1.0
+Host: test4.example.org
+EOF
+ );
+$t->{RESPONSE} = [ { 'HTTP-Protocol' => 'HTTP/1.0', 'HTTP-Status' => 301, 'Location' => "/match_7" } ];
+ok($tf->handle_http($t) == 0, 'url subdir');
+
+$t->{REQUEST} = ( <<EOF
+GET /subdir/../css/index.html HTTP/1.0
+Host: test4.example.org
+EOF
+ );
+$t->{RESPONSE} = [ { 'HTTP-Protocol' => 'HTTP/1.0', 'HTTP-Status' => 301, 'Location' => "/match_6" } ];
+ok($tf->handle_http($t) == 0, 'url subdir with path traversal');
+
ok($tf->stop_proc == 0, "Stopping lighttpd");
$tf->{CONFIGFILE} = 'lighttpd.conf';
Modified: lighttpd/trunk/tests/docroot/123/Makefile.in
===================================================================
--- lighttpd/trunk/tests/docroot/123/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/docroot/123/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -75,6 +75,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -108,6 +109,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -151,6 +153,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -183,7 +186,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/tests/docroot/Makefile.in
===================================================================
--- lighttpd/trunk/tests/docroot/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/docroot/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -115,6 +115,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -148,6 +149,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -191,6 +193,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -223,7 +226,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/tests/docroot/www/Makefile.in
===================================================================
--- lighttpd/trunk/tests/docroot/www/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/docroot/www/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -115,6 +115,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -148,6 +149,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -191,6 +193,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -223,7 +226,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/tests/docroot/www/expire/Makefile.in
===================================================================
--- lighttpd/trunk/tests/docroot/www/expire/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/docroot/www/expire/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -75,6 +75,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -108,6 +109,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -151,6 +153,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -183,7 +186,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/tests/docroot/www/go/Makefile.in
===================================================================
--- lighttpd/trunk/tests/docroot/www/go/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/docroot/www/go/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -75,6 +75,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -108,6 +109,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -151,6 +153,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -183,7 +186,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/tests/docroot/www/indexfile/Makefile.in
===================================================================
--- lighttpd/trunk/tests/docroot/www/indexfile/Makefile.in 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/docroot/www/indexfile/Makefile.in 2011-07-03 23:55:35 UTC (rev 544)
@@ -75,6 +75,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DL_LIB = @DL_LIB@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
@@ -108,6 +109,7 @@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBS = @LUA_LIBS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MEMCACHE_LIB = @MEMCACHE_LIB@
MKDIR_P = @MKDIR_P@
MYSQL_CONFIG = @MYSQL_CONFIG@
@@ -151,6 +153,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
@@ -183,7 +186,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
Modified: lighttpd/trunk/tests/request.t
===================================================================
--- lighttpd/trunk/tests/request.t 2011-07-03 23:54:21 UTC (rev 543)
+++ lighttpd/trunk/tests/request.t 2011-07-03 23:55:35 UTC (rev 544)
@@ -8,7 +8,7 @@
use strict;
use IO::Socket;
-use Test::More tests => 42;
+use Test::More tests => 44;
use LightyTest;
my $tf = LightyTest->new();
@@ -89,6 +89,21 @@
ok($tf->handle_http($t) == 0, 'HEAD request, mimetype text/html, content-length');
$t->{REQUEST} = ( <<EOF
+HEAD http://123.example.org/12345.html HTTP/1.1
+Connection: close
+EOF
+ );
+$t->{RESPONSE} = [ { 'HTTP-Protocol' => 'HTTP/1.1', 'HTTP-Status' => 200, '-HTTP-Content' => '', 'Content-Type' => 'text/html', 'Content-Length' => '6'} ];
+ok($tf->handle_http($t) == 0, 'Hostname in first line, HTTP/1.1');
+
+$t->{REQUEST} = ( <<EOF
+HEAD https://123.example.org/12345.html HTTP/1.0
+EOF
+ );
+$t->{RESPONSE} = [ { 'HTTP-Protocol' => 'HTTP/1.0', 'HTTP-Status' => 200, '-HTTP-Content' => '', 'Content-Type' => 'text/html', 'Content-Length' => '6'} ];
+ok($tf->handle_http($t) == 0, 'Hostname in first line as https url');
+
+$t->{REQUEST} = ( <<EOF
HEAD /foobar?foobar HTTP/1.0
EOF
);
More information about the pkg-lighttpd-maintainers
mailing list