[Debburn-devel] Problem with fixation of multi-session disc

Ralf Schlatterbeck ralf at zoo.priv.at
Tue Nov 13 10:47:53 UTC 2007


Package: cdrkit

I'm trying to create a multi-session cd with wodim 
Version: 9:1.1.2-1 (Debian Sarge). I can successfully record and fixate
several audio-tracks in tao-mode:

sudo wodim dev=ATA:0,0,0 -v -tao -speed=8 driveropts=burnproof fs=16m
  -multi -pad -audio cd/Thema1.wav cd/Thema2.wav cd/Thema3.wav
  cd/Thema4.wav cd/Thema5.wav cd/Thema6.wav

And then record a data track, but this fails in the fixation step:

sudo wodim dev=ATA:0,0,0 -v -tao -speed=8 driveropts=burnproof fs=16m
-multi -data cd/x.iso
(I've burned two coasters, one with and one without the -multi option on
the second session, this option doesn't make a difference)

The error message is:
TOC Type: 1 = CD-ROM
scsidev: 'ATA:0,0,0'
devname: 'ATA'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.27
Wodim version: 1.1.2
Driveropts: 'burnproof'
SCSI buffer size: 64512
atapi: -1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identification : 'DVD RW  DVR-106D'
Revision       : '1.05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1267712 = 1238 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size      : 16777216 = 16384 KB
Track 01: data   397 MB        
Total size:      457 MB (45:16.92) = 203769 sectors
Lout start:      457 MB (45:18/69) = 203769 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11644 (97:26/56)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 10
Manufacturer: Lead Data Inc.
Blocks total: 359849 Blocks current: 294971 Blocks remaining: 91202
Speed set to 1411 KB/s
Starting to write CD/DVD at speed   8.0 in real TAO mode for multi session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 64878
Track 07:  397 of  397 MB written (fifo 100%) [buf  96%]   8.2x.
Track 07: Total bytes read/written: 417314816/417314816 (203767 sectors).
Writing  time:  344.783s
Average write speed   7.9x.
Min drive buffer fill was 76%
Fixating...
Errno: 0 (Success), close track/session scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 26 04 39 0E 00 00 00 00 44 D6 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x44 Qual 0xD6 (internal target failure) [No matching qualifier] Fru 0x0
Sense flags: Blk 2491449 (not valid)
cmd finished after 5.204s timeout 480s
cmd finished after 5.204s timeout 480s
wodim: Cannot fixate disk.
Fixating time:   12.335s

No messages in kernel-log.

Retrying the fixation step with -fix produces the same problem:
sudo wodim dev=ATA:0,0,0 -v -multi -fix
...
Fixating...
Errno: 0 (Success), close track/session scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 26 04 39 0E 00 00 00 00 44 D6 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x44 Qual 0xD6 (internal target failure) [No matching qualifier] Fru 0x0
Sense flags: Blk 2491449 (not valid) 
cmd finished after 4.343s timeout 480s
cmd finished after 4.343s timeout 480s
wodim: Cannot fixate disk.
Fixating time:    4.398s

The disk is unusable as a data disk (mounting fails).

My question: Is this a problem of the drive or bug in the software? How
can I tell? This is my first attempt at burning multi-session cds, so I
can't tell if the drive is the problem.

Additionally specifying -sao when fixating doesn't error out, but
doesn't produce a readably disk either:

sudo wodim dev=ATA:0,0,0 -v -sao -multi -fix
...
Performing OPC...
Fixating...
Fixating time:    0.979s

Ralf
-- 
Ralf Schlatterbeck
email: ralf at zoo.priv.at FAX: +43/2243/26465/23




More information about the Debburn-devel mailing list