rev 16215 - in trunk/packages/kdesdk/debian: . man

Lukasz Janyst ljanyst-guest at alioth.debian.org
Sun Nov 8 12:53:17 UTC 2009


Author: ljanyst-guest
Date: 2009-11-08 12:53:16 +0000 (Sun, 08 Nov 2009)
New Revision: 16215

Added:
   trunk/packages/kdesdk/debian/cvsservice.manpages
   trunk/packages/kdesdk/debian/kapptemplate.manpages
   trunk/packages/kdesdk/debian/kbugbuster.manpages
   trunk/packages/kdesdk/debian/kcachegrind-converters.manpages
   trunk/packages/kdesdk/debian/kcachegrind.manpages
   trunk/packages/kdesdk/debian/kdesdk-scripts.manpages
   trunk/packages/kdesdk/debian/kompare.manpages
   trunk/packages/kdesdk/debian/kuiviewer.manpages
   trunk/packages/kdesdk/debian/man/
   trunk/packages/kdesdk/debian/man/build-progress.sh.1
   trunk/packages/kdesdk/debian/man/cvs-clean.1
   trunk/packages/kdesdk/debian/man/cvsaskpass.1
   trunk/packages/kdesdk/debian/man/cvsbackport.1
   trunk/packages/kdesdk/debian/man/cvsforwardport.1
   trunk/packages/kdesdk/debian/man/cvsservice.1
   trunk/packages/kdesdk/debian/man/dprof2calltree.1
   trunk/packages/kdesdk/debian/man/extractattr.1
   trunk/packages/kdesdk/debian/man/findmissingcrystal.1
   trunk/packages/kdesdk/debian/man/fixuifiles.1
   trunk/packages/kdesdk/debian/man/hotshot2calltree.1
   trunk/packages/kdesdk/debian/man/kapptemplate.1
   trunk/packages/kdesdk/debian/man/kbugbuster.1
   trunk/packages/kdesdk/debian/man/kcachegrind.1
   trunk/packages/kdesdk/debian/man/kdelnk2desktop.py.1
   trunk/packages/kdesdk/debian/man/kdemangen.pl.1
   trunk/packages/kdesdk/debian/man/kminspector.1
   trunk/packages/kdesdk/debian/man/kmmatch.1
   trunk/packages/kdesdk/debian/man/kmtrace.1
   trunk/packages/kdesdk/debian/man/kompare.1
   trunk/packages/kdesdk/debian/man/kuiviewer.1
   trunk/packages/kdesdk/debian/man/makeobj.1
   trunk/packages/kdesdk/debian/man/memprof2calltree.1
   trunk/packages/kdesdk/debian/man/op2calltree.1
   trunk/packages/kdesdk/debian/man/package_crystalsvg.1
   trunk/packages/kdesdk/debian/man/png2mng.pl.1
   trunk/packages/kdesdk/debian/man/pprof2calltree.1
   trunk/packages/kdesdk/debian/man/umbrello.1
   trunk/packages/kdesdk/debian/umbrello.manpages
Modified:
   trunk/packages/kdesdk/debian/changelog
   trunk/packages/kdesdk/debian/control
Log:
* New upstream release. * and fix for #530390

Modified: trunk/packages/kdesdk/debian/changelog
===================================================================
--- trunk/packages/kdesdk/debian/changelog	2009-11-08 11:25:11 UTC (rev 16214)
+++ trunk/packages/kdesdk/debian/changelog	2009-11-08 12:53:16 UTC (rev 16215)
@@ -1,10 +1,19 @@
-kdesdk (4:4.3.2-2) UNRELEASED; urgency=low
+kdesdk (4:4.3.3-r01) UNRELEASED; urgency=low
 
+  * New upstream release.
+
+  +++ Changes by Karl Ferdinand Ebert:
+
   * Add source.lintian-overrides to ignore lintian warning about missing
     debug depends.
 
- -- Karl Ferdinand Ebert <kfebert at gmail.com>  Thu, 08 Oct 2009 16:20:40 +0200
+  +++ Changes by Lukasz Janyst:
 
+  * Updated build dep's version numbers in debian/control
+  * Readded missing man pages (Closes: #530390)
+
+ -- Debian Qt/KDE Maintainers <debian-qt-kde at lists.debian.org>  Sun, 09 Nov 2009 12:36:08 +0100
+
 kdesdk (4:4.3.2-1) unstable; urgency=low
 
   * New upstream release.

Modified: trunk/packages/kdesdk/debian/control
===================================================================
--- trunk/packages/kdesdk/debian/control	2009-11-08 11:25:11 UTC (rev 16214)
+++ trunk/packages/kdesdk/debian/control	2009-11-08 12:53:16 UTC (rev 16215)
@@ -4,7 +4,7 @@
 Maintainer: Debian Qt/KDE Maintainers <debian-qt-kde at lists.debian.org>
 Uploaders: Ana Beatriz Guerrero Lopez <ana at debian.org>, Fathi Boudra <fabo at debian.org>, Sune Vuorela <debian at pusling.com>, Armin Berres <armin+debian at space-based.de>
 Build-Depends: cdbs (>= 0.4.51), debhelper (>= 7), quilt, pkg-kde-tools (>= 0.4),
- kdepimlibs5-dev (>= 4:4.3.2), libphonon-dev (>= 4:4.3.1),
+ kdepimlibs5-dev (>= 4:4.3.3), libphonon-dev (>= 4:4.3.1),
  libsvn-dev, libstreamanalyzer-dev (>= 0.6.3), libxslt1-dev, libboost-dev,
  binutils-dev
 Standards-Version: 3.8.3

Added: trunk/packages/kdesdk/debian/cvsservice.manpages
===================================================================
--- trunk/packages/kdesdk/debian/cvsservice.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/cvsservice.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,2 @@
+debian/man/cvsaskpass.1
+debian/man/cvsservice.1

Added: trunk/packages/kdesdk/debian/kapptemplate.manpages
===================================================================
--- trunk/packages/kdesdk/debian/kapptemplate.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/kapptemplate.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1 @@
+debian/man/kapptemplate.1

Added: trunk/packages/kdesdk/debian/kbugbuster.manpages
===================================================================
--- trunk/packages/kdesdk/debian/kbugbuster.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/kbugbuster.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1 @@
+debian/man/kbugbuster.1

Added: trunk/packages/kdesdk/debian/kcachegrind-converters.manpages
===================================================================
--- trunk/packages/kdesdk/debian/kcachegrind-converters.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/kcachegrind-converters.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,5 @@
+debian/man/dprof2calltree.1
+debian/man/hotshot2calltree.1
+debian/man/memprof2calltree.1
+debian/man/op2calltree.1
+debian/man/pprof2calltree.1

Added: trunk/packages/kdesdk/debian/kcachegrind.manpages
===================================================================
--- trunk/packages/kdesdk/debian/kcachegrind.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/kcachegrind.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1 @@
+debian/man/kcachegrind.1

Added: trunk/packages/kdesdk/debian/kdesdk-scripts.manpages
===================================================================
--- trunk/packages/kdesdk/debian/kdesdk-scripts.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/kdesdk-scripts.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,12 @@
+debian/man/build-progress.sh.1
+debian/man/cvsbackport.1
+debian/man/cvs-clean.1
+debian/man/cvsforwardport.1
+debian/man/extractattr.1
+debian/man/findmissingcrystal.1
+debian/man/fixuifiles.1
+debian/man/kdelnk2desktop.py.1
+debian/man/kdemangen.pl.1
+debian/man/makeobj.1
+debian/man/package_crystalsvg.1
+debian/man/png2mng.pl.1

Added: trunk/packages/kdesdk/debian/kompare.manpages
===================================================================
--- trunk/packages/kdesdk/debian/kompare.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/kompare.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1 @@
+debian/man/kompare.1

Added: trunk/packages/kdesdk/debian/kuiviewer.manpages
===================================================================
--- trunk/packages/kdesdk/debian/kuiviewer.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/kuiviewer.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1 @@
+debian/man/kuiviewer.1

Copied: trunk/packages/kdesdk/debian/man/build-progress.sh.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/build-progress.sh.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/build-progress.sh.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/build-progress.sh.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,56 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH BUILD-PROGRESS.SH 1 "June 16, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+build-progress.sh \- show kde-build progress in your konsole/xterm title bar
+.SH SYNOPSIS
+.B build-progress.sh
+.SH DESCRIPTION
+\fBbuild-progress.sh\fP can be used to watch the progress of a large KDE
+build in the title bar of your konsole or xterm.
+.PP
+The KDE build must be running elsewhere as a separate process, and it
+must be done using
+.BR kde-build (1).
+.PP
+When you run build-progress.sh, it will sit in a permanent loop while
+kde-build runs.  The title bar of the konsole/xterm in which you ran
+build-progress.sh will be continually updated with the directory in
+which the KDE build is currently working.
+.PP
+You must run build-progress.sh from the top-level directory of the KDE
+build tree.  This directory must contain a file named
+\fIkde-buildrc\fP (which is also used by kde-build).  This
+\fIkde-buildrc\fP must contain valid settings for
+\fIKDELOGDIR\fP and \fIKDESRCDIR\fP, or else build-progress.sh will
+fail to work.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH FILES
+.TP
+\fIkde-buildrc\fP
+This file must be contained in the current directory, which must be the
+root of the KDE build tree.  See
+.BR kde-build (1)
+for further information.
+.SH SEE ALSO
+.BR kde-build (1).
+.SH AUTHOR
+build-progress.sh was written by Malte Starostik <malte at kde.org> and others.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/cvs-clean.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/cvs-clean.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/cvs-clean.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/cvs-clean.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,50 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVS-CLEAN 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvs\-clean \- delete all files and directories not registered with CVS
+.SH SYNOPSIS
+.B cvs\-clean
+[ \fB-n, \-\-dry-run\fP ]
+[ \fB-h, \-\-help\fP ]
+.SH DESCRIPTION
+\fBcvs\-clean\fP recursively deletes everything in or beneath the
+current directory that is not known to CVS (i.e., that has not been
+checked out of or checked into a CVS repository).
+.PP
+A list of all files and directories that are deleted will be written to
+the console.
+.PP
+This script behaves similarly to the \fIcvs-clean\fP target from the
+file \fIadmin/Makefile.common\fP found in most KDE application sources.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB-n, \-\-dry-run\fP
+Print the intended actions to the console, but do not change anything on
+the filesystem.
+.TP
+\fB-h, \-\-help\fP
+Display usage information.
+.SH SEE ALSO
+.BR cvs (1).
+.SH AUTHOR
+This utility was written by Oswald Buddenhagen <ossi at kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/cvsaskpass.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/cvsaskpass.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/cvsaskpass.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/cvsaskpass.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,63 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSASKPASS 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsaskpass \- prompt for a password for the CVS DCOP service
+.SH SYNOPSIS
+.B cvsaskpass
+.RI "[ " generic-options " ]"
+.I prompt
+.SH DESCRIPTION
+This utility displays a dialog box prompting the user for the password to
+a CVS repository, then writes the password to standard output and exits.
+You should not need to run this program directly \- it is designed for
+the internal use of
+.BR cvsservice (1).
+.PP
+The prompt should be of the following form:
+.RS
+.PP
+\fIuser\fP@\fIhost\fP's password:
+.RE
+.PP
+This will allow the dialog box to display the details of the CVS
+repository to the user.
+.PP
+This utility is part of the CVS service provided with Cervisia, which in
+turn is part of the KDE Software Development Kit.
+.SH OPTIONS
+For a full summary of options, run \fIcvsaskpass \-\-help\fP.
+.SH RETURN VALUE
+If a password was succefully obtained, 0 is returned.  If no prompt was
+supplied on the command-line or if the dialog was cancelled, 1 is returned.
+.SH SEE ALSO
+.BR cervisia (1),
+.BR cvsservice (1),
+.BR dcop (1).
+.PP
+Details of how to use the CVS service from within another script or C++
+program can be found in \fI/usr/share/doc/libcvsservice0/DESIGN\fP.
+.SH AUTHOR
+The CVS service was written by Christian Loose <christian.loose at kdemail.net>.
+.br
+Cervisia was written by Bernd Gehrmann <bernd at physik.hu-berlin.de>,
+Christian Loose <christian.loose at kdemail.net>,
+Andre Woebbeking <woebbeking at web.de>,
+Carlos Woelz <carloswoelz at imap-mail.com> and others.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/cvsbackport.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/cvsbackport.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/cvsbackport.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/cvsbackport.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSBACKPORT 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsbackport \- backport the last change in HEAD to a branch
+.SH SYNOPSIS
+.B cvsbackport
+\fIfile\fP ...
+.SH DESCRIPTION
+For each file given on the command line,
+\fBcvsbackport\fP will attempt to determine the last change made to
+the file in HEAD and then backport that change to a CVS branch (the
+branch name is hard-coded; see below).
+.PP
+The changes to be backported will be displayed on screen, and you will
+have the chance to confirm or abort before any commits are made.
+.PP
+The files must be checked out from HEAD when you run this utility.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH WARNINGS
+The branch tag is hard-coded into the script (currently it is set to
+KDE_3_4_BRANCH).
+.PP
+If you abort (i.e., you do not make the suggested commits), your files
+will be checked out from the branch (and not from HEAD as they were
+before).
+.SH SEE ALSO
+.BR cvsblame (1),
+.BR cvsforwardport (1),
+.BR cvslastchange (1),
+.BR cvslastlog (1),
+.BR cvsrevertlast (1).
+.SH AUTHOR
+This utility was written by Dirk Mueller and David Faure.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/cvsforwardport.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/cvsforwardport.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/cvsforwardport.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/cvsforwardport.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSFORWARDPORT 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsforwardport \- forwardport the last change in a branch to HEAD
+.SH SYNOPSIS
+.B cvsforwardport
+\fIfile\fP ...
+.SH DESCRIPTION
+For each file given on the command line,
+\fBcvsforwardport\fP will attempt to determine the last change made to
+the file in the primary CVS branch and then forwardport that change to HEAD.
+The branch name is hard-coded; see below.
+.PP
+The changes to be forwardported will be displayed on screen, and you will
+have the chance to confirm or abort before any commits are made.
+.PP
+The files must be checked out from the branch when you run this utility.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH WARNINGS
+The branch tag is hard-coded into the script (currently it is set to
+KDE_3_4_BRANCH).
+.PP
+If you abort (i.e., you do not make the suggested commits), your files
+will be checked out from HEAD (and not from the branch as they were
+before).
+.SH SEE ALSO
+.BR cvsbackport (1),
+.BR cvsblame (1),
+.BR cvslastchange (1),
+.BR cvslastlog (1),
+.BR cvsrevertlast (1).
+.SH AUTHOR
+This utility was written by Dirk Mueller and David Faure.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/cvsservice.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/cvsservice.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/cvsservice.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/cvsservice.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,79 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSSERVICE 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsservice \- a DCOP service for accessing CVS repositories
+.SH SYNOPSIS
+.B cvsservice
+.RI "[ " generic-options " ]"
+.SH DESCRIPTION
+The CVS service is a DCOP service for accessing and working with
+remote CVS repositories.  Applications may link with this library to
+access the DCOP service directly from C++.  Alternatively, scripts may
+access the service using the standard
+.BR dcop (1)
+command-line tool.
+.PP
+DCOP is the Desktop Communication Protocol used throughout KDE.
+.PP
+The CVS DCOP service consists of the following three parts:
+.TP
+\fBCvsService\fP
+The main interface to the functionality of the
+.BR cvs (1)
+command line client.  There is one method for each CVS command, e.g., add,
+checkout, commit, etc.  The methods assemble the command line
+arguments, create a CvsJob and return a DCOPRef object for it
+to the caller.  There is one instance of this service for each
+application instance.
+.TP
+\fBRepository\fP
+This DCOPObject manages the configuration data of the current
+CVS repository.  The data is automatically updated when other
+service instances change it.
+.TP
+\fBCvsJob\fP
+This class represents a CVS job.  You can execute and cancel it,
+and you can retrieve the output of the cvs client by either
+connecting to the proper DCOP signals or by using the output()
+method.  There are two types of jobs.  First the non-concurrent
+job which has to run alone, like cvs update or import.  Second
+the jobs which can run concurrently like cvs log or annotate.
+.PP
+The CVS service is provided with Cervisia, which is part of the KDE
+Software Development Kit.
+.SH OPTIONS
+For a full summary of options, run \fIcvsservice \-\-help\fP.
+.SH SEE ALSO
+.BR cervisia (1),
+.BR cvs (1),
+.BR cvsaskpass (1),
+.BR dcop (1).
+.PP
+Details of how to use the CVS service from within a shell script, a C++
+program or through the JavaScript bindings can be found in
+\fI/usr/share/doc/libcvsservice0/DESIGN\fP.
+.SH AUTHOR
+The CVS service was written by Christian Loose <christian.loose at kdemail.net>.
+.br
+Cervisia was written by Bernd Gehrmann <bernd at physik.hu-berlin.de>,
+Christian Loose <christian.loose at kdemail.net>,
+Andre Woebbeking <woebbeking at web.de>,
+Carlos Woelz <carloswoelz at imap-mail.com> and others.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/dprof2calltree.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/dprof2calltree.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/dprof2calltree.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/dprof2calltree.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,60 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH DPROF2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+dprof2calltree \- convert perl's DProf profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B dprof2calltree
+\fB\-f\fP \fIinput\fP
+[ \fB\-o\fP \fIoutput\fP ]
+.SH DESCRIPTION
+\fBdprof2calltree\fP reads the \fItmon.out\fP profiling data output by
+Perl's Devel::DProf profiling package, and converts it into calltree format
+for use by KCachegrind.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-f\fP \fIinput\fP
+Specifies the DProf \fItmon.out\fP file to convert.
+.TP
+\fB\-o\fP \fIoutput\fP
+Write the calltree output to the given file for use by KCachegrind.
+If omitted, the output will be written to file of the form
+\fIcachgrind.out.<input>\fP.
+.SH EXAMPLE
+If you run a perl script as:
+.PP
+.RS
+perl -d:DProf yourscript.pl
+.RE
+.PP
+then this will write profiling data to \fItmon.out\fP.  You can then
+work with this data in KCachegrind as follows:
+.PP
+.RS
+dprof2calltree -f tmin.out -o cachegrind.out.foo
+.br
+kcachegrind cachegrind.out.foo
+.RE
+.SH SEE ALSO
+.BR kcachegrind (1).
+.SH AUTHOR
+This converter was written by George Schlossnagle <george at omniti.com>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/extractattr.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/extractattr.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/extractattr.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/extractattr.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,61 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH EXTRACTATTR 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+extractattr \- extract element attributes from UI and XML GUI files
+.SH SYNOPSIS
+.B extractattr
+\fB\-\-attr=\fP\fIname\fP
+[ \fB\-\-attr=\fP\fIname\fP ... ]
+[ \fB\-\-context=\fP\fIname\fP ]
+\fIfile\fP ...
+.PP
+.B extractattr \-\-help
+.SH DESCRIPTION
+\fBextractattr\fP finds all of the given element attributes within the
+given files.  It then writes the corresponding \fIi18n()\fP calls to
+standard output (usually redirected to rc.cpp) so that xgettext can parse
+them.  Only the attributes specified by \fB\-\-attr\fP will be extracted.
+.PP
+Both Qt designer (.ui) files and XML GUI (.rc) files are understood.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-\-attr=\fP\fIname\fP
+Specifies an attribute to be extracted.  This option may be used
+multiple times.
+.br
+The \fIname\fP argument must be of the form
+\fIElement\fP,\fIattribute\fP or
+\fIElement\fP,\fIattribute\fP,\fIcontext\fP.
+.br
+The context is optional, and is used in constructing the i18n() calls.
+If specified it will override the default context set by \fB\-\-context\fP.
+.TP
+\fB\-\-context=\fP\fIname\fP
+Give all i18n() calls the given context: i18n("\fIname\fP", ...).
+.TP
+\fB\-\-help\fP
+Display a summary of options.
+.SH EXAMPLE
+extractattr \-\-attr=Title,data \-\-attr=Description,data,Stencils file.ui
+.SH AUTHOR
+This utility was written by Richard Evans <rich at ridas.com> and others.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/findmissingcrystal.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/findmissingcrystal.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/findmissingcrystal.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/findmissingcrystal.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,42 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH FINDMISSINGCRYSTAL 1 "February 6, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+findmissingcrystal \- determine which KDE Crystal icons are the same as
+the KDE Classic hicolor icons
+.SH SYNOPSIS
+.B findmissingcrystal
+.I module
+.SH DESCRIPTION
+\fBfindmissingcrystal\fP is a small utility that runs through the icons
+in the given KDE module and determines which Crystal icons from that
+module are identical to the old KDE Classic hicolor icons.
+.PP
+This script \fBmust\fP be run from the top-level directory of a KDE source
+tree (i.e., the directory containing \fIkdelibs\fP, \fIkdebase\fP, etc.).
+It is assumed that \fImodule\fP is a top-level module in the source tree,
+and it is also assumed that the source tree contains the \fIkdeartwork\fP
+module (which contains the old hicolor icons).
+.PP
+For each Crystal icon in the given module, a message will be output
+describing whether the icon is new (no matching hicolor icon was found),
+different from the hicolor icon or the same as the hicolor icon.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/fixuifiles.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/fixuifiles.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/fixuifiles.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/fixuifiles.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,63 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH FIXUIFILES 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+fixuifiles \- remove undesirable features from Qt/KDE .ui files
+.SH SYNOPSIS
+.B fixuifiles
+[ \fB\-v, \-\-verbose\fP ]
+[ \fB\-\-omitqtcheck\fP ]
+[ \fIfile\fP ... ]
+.br
+.B fixuifiles \-\-help
+.SH DESCRIPTION
+\fBfixuifiles\fP processes one or more Qt/KDE user interface definition
+files (.ui files) and tries to remove some of the insanities found
+therein.  If no filenames are given, fixuifiles will process all .ui
+files in or beneath the current directory.
+.PP
+The following problems are fixed:
+.PP
+.RS
+Too high minimum Qt version;
+.PP
+Hardcoded untranslatable Alt+Letter accels (auto-added by Qt Designer);
+.PP
+Captions that are equal to class names (auto-added by Qt Designer).
+.RE
+.PP
+The threshold Qt version can be set
+using either a \fI.qt_minversion\fP file (containing simply the Qt version
+number) or a \fIconfigure.in.in\fP file (containing an appropriate
+MIN_CONFIG macro).  These files may be in the directory containing the .ui
+file or any parent directory.  If no threshold Qt version is found,
+a sensible default will be used.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-v, \-\-verbose\fP
+Verbose mode.  Additional debugging information is written to standard output.
+.TP
+\fB\-\-omitqtcheck\fP
+Do not check the minimum Qt version.
+.SH AUTHOR
+fixuifiles was written by David Faure <faure at kde.org> and
+Dirk Mueller <mueller at kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/hotshot2calltree.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/hotshot2calltree.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/hotshot2calltree.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/hotshot2calltree.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,57 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH HOTSHOT2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+hotshot2calltree \- convert hotshot profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B hotshot2calltree
+[ \fB\-\-file\-limit\fP \fIlimit\fP ]
+\fB\-o\fP \fIoutput\fP \fIinput\fP [ \fIinput\fP ... ]
+.SH DESCRIPTION
+\fBhotshot2calltree\fP reads one or more pstat profiling data files
+as output by the hotshot python profiler, and converts them into
+calltree format for use by KCachegrind.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-o\fP \fIoutput\fP
+Write the calltree output into the given file for use by KCachegrind.
+This may be \fB\-\fP if you wish to write to standard output.
+.TP
+\fIinput\fP ...
+Read the hotshot profiling data from the given file(s).
+.TP
+\fB\-\-file\-limit\fP \fIlimit\fP
+Stop after the given number of input files.
+.SH EXAMPLE
+Suppose that you have used hotshot to profile a python app, with results
+dumped to the file \fIpythongrind.prof\fP.  You may then work with this
+data in KCachegrind as follows.
+.PP
+.RS
+hotshot2cachegrind \-o cachegrind.out.0 pythongrind.prof
+.br
+kcachegrind cachegrind.out.0
+.RE
+.SH SEE ALSO
+.BR kcachegrind (1).
+.SH AUTHOR
+This converter was written by Jorg Beyer <job at webde-ag.de>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kapptemplate.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kapptemplate.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kapptemplate.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kapptemplate.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KAPPTEMPLATE 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kapptemplate \- creates a framework to develop a KDE application
+.SH SYNOPSIS
+.B kapptemplate
+[ \fB\-\-noinit\fP ] [ \fB\-\-default\fP ]
+.RB "[ " \-\-full\-app " | " \-\-kpart\-app " | " \-\-kpart\-plugin
+.RB " | " \-\-existing " ]"
+.PP
+.B kapptemplate \-\-help
+.SH DESCRIPTION
+\fBKAppTemplate\fP is a shell script that will create the necessary
+framework to develop various KDE applications.  It takes care of the
+autoconf/automake code as well as providing a skeleton and example of
+what the code typically looks like.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+.SS General Options
+.TP
+\-\-help
+Display a full summary of options.
+.TP
+\-\-noinit
+Don't run 'make \-f Makefile.cvs'.
+.TP
+\-\-default
+Use default values instead of prompting.
+.SS Framework Types
+.TP
+\-\-full\-app
+Create a full featured KDE application.
+.TP
+\-\-kpart\-app
+Create a full featured KPart application.
+.TP
+\-\-kpart\-plugin
+Create a KPart plugin framework.
+.TP
+\-\-existing
+Converting existing source to an automake/autoconf KDE framework.
+.SH FILES
+.TP
+.I ~/.kapptemplate
+Stores default values.
+.SH SEE ALSO
+The original documentation from the program author
+is available in \fI/usr/share/doc/kapptemplate/\fP.
+.SH AUTHOR
+KAppTemplate was written by Kurt Granroth <granroth at kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kbugbuster.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kbugbuster.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kbugbuster.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kbugbuster.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,50 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KBUGBUSTER 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kbugbuster \- front end for the KDE bug tracking system
+.SH SYNOPSIS
+.B kbugbuster
+.RI "[ " generic-options " ]"
+[ \fB\-d, \-\-disconnected\fP ]
+[ \fB\-\-pkg, \-\-package\fP \fIpkg\fP ]
+[ \fB\-\-bug\fP \fInumber\fP ]
+.SH DESCRIPTION
+\fBKBugBuster\fP is a GUI front end for the KDE bug tracking system.
+It allows the user to view and manipulate bug reports and provides a
+variety of options for searching through reports.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+Below are the kbugbuster-specific options.
+For a full summary of options, run \fIkbugbuster \-\-help\fP.
+.TP
+[ \fB\-d, \-\-disconnected\fP ]
+Start in disconnected mode.
+.TP
+[ \fB\-\-pkg, \-\-package\fP \fIpkg\fP ]
+Start with the bug list for the given package.
+.TP
+[ \fB\-\-bug\fP \fInumber\fP ]
+Start with the given bug report.
+.SH AUTHOR
+KBugBuster was written by Martijn Klingens <klingens at kde.org>,
+Simon Hausmann <hausmann at kde.org>, Cornelius Schumacher <schumacher at kde.org>
+and David Faure <faure at kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kcachegrind.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kcachegrind.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kcachegrind.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kcachegrind.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,67 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KCACHEGRIND 1 "March 25, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kcachegrind \- a visualisation tool for valgrind profiling output
+.SH SYNOPSIS
+.B kcachegrind
+.RI "[ " generic-options " ]"
+[ \fB\-r\fP \fIexec\fP ] [ \fItrace-file\fP ]
+.SH DESCRIPTION
+\fBKCachegrind\fP is a visualisation tool for the profiling data generated
+by \fBcalltree\fP, a profiling skin for \fBvalgrind\fP.  Applications can be
+profiled using calltree without being recompiled, and shared libraries
+and plugin architectures are supported.
+.PP
+For visualising the output from other profiling tools, several converters
+are available.  On Debian systems these can be found in the
+\fIkcachegrind-converters\fP package.
+.PP
+This application is part of the KDE Software Development Kit.
+.SH OPTIONS
+Below are the kcachegrind-specific options.
+For a full summary of options, run \fIkcachegrind \-\-help\fP.
+.TP
+\fB\-r\fP \fIexec\fP
+Run the program \fIexec\fP under cachegrind.
+.TP
+\fItrace-file\fP
+Visualise data from the given trace.
+.SH SEE ALSO
+.BR calltree (1),
+.BR dprof2calltree (1),
+.BR hotshot2calltree (1),
+.BR memprof2calltree (1),
+.BR op2calltree (1),
+.BR pprof2calltree (1),
+.BR valgrind (1).
+.PP
+Full user documentation is available through the KDE Help Centre.
+You can also enter the URL
+\fIhelp:/kcachegrind/\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kcachegrind/\fP'
+from the command-line.
+.PP
+If the KDE Help Centre is not installed then you can install the package
+\fIkdesdk-doc-html\fP and read this documentation in HTML format from
+\fI/usr/share/doc/kde/HTML/en/kcachegrind/\fP.
+.SH AUTHOR
+KCachegrind was written by Josef Weidendorfer <Josef.Weidendorfer at gmx.de>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kdelnk2desktop.py.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kdelnk2desktop.py.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kdelnk2desktop.py.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kdelnk2desktop.py.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,39 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KDELNK2DESKTOP.PY 1 "November 14, 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kdelnk2desktop.py \- converts .kdelnk to .desktop
+.SH SYNOPSIS
+.B kdelnk2desktop.py
+.RI "[ " kdelnk-file " ] ..."
+.SH DESCRIPTION
+\fBkdelnk2desktop.py\fP is used to convert
+a \fI.kdelnk\fP file (used by KDE 1) into a \fI.desktop\fP
+file (used by KDE 2 and later).
+.PP
+File \fIkdelnk-file\fP must have a name ending in \fI.kdelnk\fP.
+After kdelnk2desktop.py is run, this will be replaced by a new file
+ending in \fI.desktop\fP.  The original \fIkdelnk-file\fP will be
+removed.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH WARNING
+If \fIkdelnk-file\fP does not end in \fI.kdelnk\fP,
+the results of this script are unpredictable.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kdemangen.pl.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kdemangen.pl.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kdemangen.pl.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kdemangen.pl.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,51 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KDEMANGEN.PL 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kdemangen.pl \- automatically create a draft manpage for a KDE app
+.SH SYNOPSIS
+.B kdemangen.pl
+.I /path/to/application
+.SH DESCRIPTION
+\fBkdemangen.pl\fP will automatically create a draft manpage for a KDE
+application.  Manpages are always better when hand-tailored, but this
+should give you a fairly good start.
+.PP
+To create the manpage, it will use the \-\-author and \-\-help\-all
+output for the application passed on the command line.
+It will also use the description in the
+Debian control file if one is available.  To make use of this additional
+feature, you must run kdemangen.pl from within the \fIdebian/\fP
+subdirectory of the application sources.
+.PP
+The new manpage will be written to standard output.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH WARNING
+This utility will only work for a full KDE application that uses
+KCmdLineArgs (which most full KDE applications do).
+.SH EXAMPLE
+.RS
+cd /path/to/kde/srcs/kdeedu/debian
+.br
+kdemangen /usr/bin/kstars > kstars.1
+.RE
+.SH AUTHOR
+kdemangen.pl was written by Dominique Devriese <devriese at kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kminspector.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kminspector.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kminspector.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kminspector.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,50 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KMINSPECTOR 1 "February 25, 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kminspector \- run a program with the KDE memory leak tracer
+.SH SYNOPSIS
+.B kminspector
+\fIprogram\fP [ \fIprogram-args\fP ]
+.SH DESCRIPTION
+\fBKMinspector\fP runs the given program, examines its memory
+allocation behaviour using \fIlibktrace\fP and pipes the resulting
+allocation tree through \fIless\fP.
+.PP
+The given program does not need to be specially compiled.
+.PP
+This utility is provided with KMtrace,
+a KDE tool to assist with malloc debugging using
+glibc's "mtrace" functionality. Unfortunately the mtrace that is part of
+current (9/9/2000) glibc versions only logs the return-address of the
+malloc/free call. The library included with KMtrace
+logs a complete backtrace upon malloc/free.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH SEE ALSO
+.BR demangle (1),
+.BR kmmatch (1),
+.BR kmtrace (1).
+.PP
+Much more extensive documentation for KMtrace can be found in
+\fI/usr/share/doc/kmtrace/README\fP.
+.SH AUTHOR
+KMtrace was written by Waldo Bastian <bastian at kde.org>,
+Mike Haertel <mike at ai.mit.edu> and Andi Kleen <ak at suse.de>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kmmatch.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kmmatch.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kmmatch.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kmmatch.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KMMATCH 1 "February 26, 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kmmatch \- search for symbols in a map file
+.SH SYNOPSIS
+.B kmmatch
+.I map-file call-file
+.SH DESCRIPTION
+\fBKMMatch\fP determines which symbols from a given set (\fIcall-file\fP) are
+present in a given map file.
+.PP
+The \fImap-file\fP should contain output from \fInm\fP (which extracts
+information from object files).  It must \fBnot\fP contain any blank
+lines or header information (such as the name of the object file); this
+means you may need to strip the first few lines of \fInm\fP output from
+the \fImap-file\fP.
+.PP
+The \fIcall-file\fP should contain a list of symbols (such as function
+calls made by a program), one per line.
+.PP
+This utility will find which of the symbols in \fIcall-file\fP are
+present in \fImap-file\fP and write them to standard error, one per
+line, in the order in which they appear in \fIcall-file\fP.
+.PP
+Note that this utility is called \fBmatch\fP in the original KDE
+distribution; it has been renamed to \fBkmmatch\fP in Debian to
+avoid conflicts with unrelated packages.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH SEE ALSO
+.BR demangle (1),
+.BR kminspector (1),
+.BR kmtrace (1),
+.BR nm (1).
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kmtrace.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kmtrace.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kmtrace.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kmtrace.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,72 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KMTRACE 1 "February 25, 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kmtrace \- a KDE memory leak tracer
+.SH SYNOPSIS
+.B kmtrace
+[ \fIgeneric-options\fP ]
+[ \fB\-x, \-\-exclude\fP \fIfile\fP ]
+[ \fB\-e, \-\-exe\fP \fIfile\fP ]
+[ \fB\-t, \-\-tree\fP \fIfile\fP
+[ \fB\-\-th, \-\-treethreshold\fP \fIvalue\fP ]
+[ \fB\-\-td, \-\-treedepth\fP \fIvalue\fP ]]
+[ \fItrace-log\fP ]
+.SH DESCRIPTION
+\fBKMtrace\fP is a KDE tool to assist with malloc debugging using
+glibc's "mtrace" functionality. Unfortunately the mtrace that is part of
+current (9/9/2000) glibc versions only logs the return-address of the
+malloc/free call. The library included with KMtrace
+logs a complete backtrace upon malloc/free.
+.PP
+KMtrace will investigate the trace log specified on the command line,
+or \fIktrace.out\fP if no trace log is specified.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+Below are the kmtrace-specific options.
+For a full summary of options, run \fIkmtrace \-\-help\fP.
+.TP
+\fB\-x, \-\-exclude\fP \fIfile\fP
+File containing symbols to exclude from output.
+.TP
+\fB\-e, \-\-exe\fP \fIfile\fP
+Executable to use for looking up unknown symbols.
+.TP
+\fB\-t, \-\-tree\fP \fIfile\fP
+Write a tree of the allocations to the given file.
+.TP
+\fB\-\-th, \-\-treethreshold\fP \fIvalue\fP
+When writing the allocations tree, hide subtrees allocating less than the
+given memory amount.
+.TP
+\fB\-\-td, \-\-treedepth\fP \fIvalue\fP
+When writing the allocations tree, hide subtrees that are deeper than the
+specified depth.
+.SH SEE ALSO
+.BR demangle (1),
+.BR kminspector (1),
+.BR kmmatch (1).
+.PP
+Much more extensive documentation can be found in
+\fI/usr/share/doc/kmtrace/README\fP.
+.SH AUTHOR
+KMtrace was written by Waldo Bastian <bastian at kde.org>,
+Mike Haertel <mike at ai.mit.edu> and Andi Kleen <ak at suse.de>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kompare.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kompare.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kompare.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kompare.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,79 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KOMPARE 1 "March 25, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kompare \- a KDE GUI for viewing differences between files
+.SH SYNOPSIS
+.B kompare
+[ \fIgeneric-options\fP ]
+.br
+.B kompare
+[ \fIgeneric-options\fP ] [ \fB\-c\fP ] \fIURL1 URL2\fP
+.br
+.B kompare
+[ \fIgeneric-options\fP ] [ \fB\-o\fP [ \fB\-n\fP ]] \fIdiff\fP
+.br
+.B kompare
+[ \fIgeneric-options\fP ] \fB\-b\fP \fIURL diff\fP
+.SH DESCRIPTION
+\fBKompare\fP is a graphical user interface for viewing the differences
+between two files.  It will also optionally create a diff file.
+.PP
+Depending upon what is passed on the command line, Kompare can compare
+documents, display diff files and blend diff files back into original
+documents.
+.PP
+If an url is given as - then Kompare will read the corresponding file
+from standard input.  Thus (for instance) Kompare can be used as:
+.PP
+.RS
+cvs diff | kompare \-o \-
+.RE
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+Below are the kompare-specific options.
+For a full summary of options, run \fIkompare \-\-help\fP.
+.TP
+\fB\-b\fP \fIURL diff\fP
+Blends \fIdiff\fP into URL.  \fIdiff\fP is expected to be diff output and
+\fIURL\fP the file or folder that the diff output needs to be blended into.
+.TP
+\fB\-c\fP \fIURL1 URL2\fP
+Compares \fIURL1\fP with \fIURL2\fP.  This is the default mode if two
+URLs are passed.
+.TP
+\fB\-n\fP
+Used with \fB\-o\fP to stop Kompare from checking for the original file.
+.TP
+\fB\-o\fP \fIdiff\fP
+Opens the given diff file.  This is the default mode if only one URL is
+passed.
+.br
+Kompare will check to see if it can find
+the original file(s).  If it can, it will blend the original file(s) into
+the diff output and show the result in the viewer.  Passing \fB\-n\fP
+will disable this check.
+.SH SEE ALSO
+The original documentation from the program author
+is available in \fI/usr/share/doc/kompare/\fP.
+.SH AUTHOR
+Kompare was written by John Firebaugh <jfirebaugh at kde.org>,
+Otto Bruggeman <otto.bruggeman at home.nl> and others.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/kuiviewer.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/kuiviewer.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/kuiviewer.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/kuiviewer.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,65 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KUIVIEWER 1 "March 25, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kuiviewer \- a viewer for Qt Designer user interface files
+.SH SYNOPSIS
+.B kuiviewer
+.RI "[ " generic-options " ]"
+.RI "[ " ui-file ... " ]"
+.PP
+.B kuiviewer
+.RI "[ " generic-options " ]"
+{ \fB\-s, \-\-takescreenshot\fP \fIfilename\fP }
+[ \fB\-w, \-\-screenshotwidth\fP \fIint\fP ]
+[ \fB\-h, \-\-screenshotheight\fP \fIint\fP ]
+.I ui-file
+.SH DESCRIPTION
+\fBKUIViewer\fP is a utility to display and test the user interface (.ui)
+files generated by \fBQt Designer\fP.  The interfaces can be displayed in a
+variety of different widget styles.
+.PP
+Normally KUIViewer launches a full GUI, allowing the user to interact with
+the given interface.
+By passing the \fB\-\-takescreenshot\fP option, you can make KUIViewer dump a
+screenshot of the interface instead and exit immediately.  Other options
+are available to control precisely how this screenshot is constructed.
+.PP
+This application is part of the KDE Software Development Kit.
+.SH OPTIONS
+Below are the kuiviewer-specific options.
+For a full summary of options, run \fIkuiviewer \-\-help\fP.
+.TP
+\fB\-s, \-\-takescreenshot\fP \fIfilename\fP
+Take a screenshot of the given interface and exit immediately.
+The \fIfilename\fP argument specifies where the screenshot will be saved.
+This screenshot will be saved in PNG format.
+.TP
+\fB\-w, \-\-screenshotwidth\fP \fIint\fP
+Before taking a screenshot, resize the interface to the given width.
+.TP
+\fB\-h, \-\-screenshotheight\fP \fIint\fP
+Before taking a screenshot, resize the interface to the given height.
+.SH SEE ALSO
+.BR designer (1).
+.SH AUTHOR
+KUIViewer was written by Richard Moore <rich at kde.org>,
+Ian Reinhart Geiser <geiseri at kde.org> and
+Benjamin C. Meyer <ben+kuiviewer at meyerhome.net>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/makeobj.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/makeobj.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/makeobj.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/makeobj.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,66 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH MAKEOBJ 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+makeobj \- run make from the correct directory
+.SH SYNOPSIS
+.B makeobj
+[ \fImake-argument\fP ... ]
+.SH DESCRIPTION
+\fBmakeobj\fP is a wrapper around \fBmake\fP which basically checks
+whether it's in the source directory or the build directory and changes
+to the correct directory before calling make.
+.PP
+The command-line arguments will (generally) be passed directly to make.
+.PP
+This script is useful if the source directory is different from the
+build directory and the Makefiles are kept in the build directory, as is
+common for instance when building the KDE sources.  This script can however
+be used in more standard scenarios (such as non-KDE projects for which the
+source and build directories are the same), where it will behave just like
+make.
+.PP
+One of the environment variables OBJ_SUBDIR or OBJ_REPLACEMENT
+should be set to indicate where the build directory is in relation to
+the source directory.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH ENVIRONMENT VARIABLES
+Note that only one of OBJ_SUBDIR and OBJ_REPLACEMENT should be used.
+If the build directory is simply a subdirectory of the source directory,
+the simpler variable OBJ_SUBDIR should be used.
+.TP
+OBJ_SUBDIR
+Indicates that the build directory is in the given subdirectory of the
+source directory.  For instance, if the source directory is \fIkdesdk\fP
+and the build directory is \fIkdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
+should be set to \fIobj-i386-linux\fP.
+.TP
+OBJ_REPLACEMENT
+A \fBsed\fP expression that is used to transform the source directory
+into the build directory.
+For instance, if the source directory is \fI~/src/kdesdk\fP and the
+build directory is \fI~/src/kdesdk-obj\fP, then OBJ_REPLACEMENT could
+be set to \fIs#src/kdesdk#src/kdesdk-obj#\fP.
+.SH SEE ALSO
+.BR make (1),
+.BR sed (1).
+.SH AUTHOR
+makeobj was written by Stephan Kulow <coolo at kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/memprof2calltree.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/memprof2calltree.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/memprof2calltree.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/memprof2calltree.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,36 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH MEMPROF2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+memprof2calltree \- convert memprof profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B memprof2calltree
+.SH DESCRIPTION
+\fBmemprof2calltree\fP reads the memory profiles of memprof and
+converts them into calltree format for use by KCachegrind.
+.PP
+The memprof data must be supplied on standard input, and the
+corresponding calltree data will be written to standard output.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH SEE ALSO
+.BR kcachegrind (1).
+.SH AUTHOR
+This converter was written by Josef Weidendorfer <Josef.Weidendorfer at gmx.de>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/op2calltree.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/op2calltree.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/op2calltree.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/op2calltree.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,43 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH OP2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+op2calltree \- convert OProfile profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B op2calltree
+.SH DESCRIPTION
+\fBop2calltree\fP reads the profiling data output by OProfile v0.8 and
+converts it into calltree format for use by KCachegrind.
+.PP
+The OProfile data must be supplied on standard input, and should be
+obtained by running:
+.PP
+.RS
+opreport \-gdf
+.RE
+.PP
+This converter will then write a separate calltree data file for each
+application, to a file of the form \fIoprof.out.<app>\fP.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH SEE ALSO
+.BR kcachegrind (1).
+.SH AUTHOR
+This converter was written by Josef Weidendorfer <Josef.Weidendorfer at gmx.de>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/package_crystalsvg.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/package_crystalsvg.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/package_crystalsvg.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/package_crystalsvg.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,41 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH PACKAGE_CRYSTALSVG 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+package_crystalsvg \- bundle up Crystal SVG sources from a KDE checkout
+.SH SYNOPSIS
+.B package_crystalsvg
+.SH DESCRIPTION
+\fBpackage_crystalsvg\fP assumes that the current directory contains one
+or more checked-out KDE modules.  It searches these modules for Crystal
+SVG vector sources (.svgz or .svg.gz files)
+and packages them up into a tarball.  The tarball will also
+contain \fIFILES\fP (describing the contents of the tarball and which
+KDE modules/paths they were copied from) as well as some other bits and
+pieces.
+.PP
+Note that you must at least have kdelibs checked out for this utility to
+run.
+.PP
+The final tarball will be created in the current working directory.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH AUTHOR
+package_crystalsvg was written by Frans Englich <frans.englich at telia.com>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/png2mng.pl.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/png2mng.pl.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/png2mng.pl.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/png2mng.pl.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,49 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH PNG2MNG.PL 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+png2mng.pl \- combine a set of PNG images into an animated MNG image
+.SH SYNOPSIS
+.B png2mng.pl
+.I basename width height
+.SH DESCRIPTION
+\fBpng2mng.pl\fP reads a sequence of PNG images and combines them into
+a single animated MNG image.
+.PP
+The individual PNG images should be numbered consecutively from zero up,
+and should have names of the form
+.I basenameXXXX
+where
+.I XXXX
+is the four-digit sequence number (0000, 0001, 0002, etc).
+The width and height of the PNG images should
+also be included on the command line.
+.PP
+The final animated MNG image will be written to standard output.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH EXAMPLE
+The following example will combine the files hi32-action-kde-0000.png,
+hi32-action-kde-0001.png, hi32-action-kde-0002.png, etc., and write
+the resulting animated image to hi32-action-kde.mng:
+.PP
+.RS
+png2mng.pl hi32-action-kde- 32 32 > hi32-action-kde.mng
+.RE
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/pprof2calltree.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/pprof2calltree.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/pprof2calltree.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/pprof2calltree.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH PPROF2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+pprof2calltree \- convert APD profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B pprof2calltree
+\fB\-f\fP \fIinput\fP
+.SH DESCRIPTION
+\fBpprof2calltree\fP reads the pprof profiling data output by
+APD (http://pecl.php.net/apd/), and converts it into calltree format
+for use by KCachegrind.
+.PP
+This utility is part of the KDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-f\fP \fIinput\fP
+Specifies the APD pprof trace file to convert.  This generally has a
+name of the form \fIpprof.XXXXX.Y\fP.  The calltree output for
+KCachegrind will then be written to the file \fIcachegrind.out.XXXXX.Y\fP.
+.SH EXAMPLE
+Suppose you profile a script with APD and obtain the pprof trace file
+\fIpprof.12345.1\fP.  You can then work with this data in KCachegrind as
+follows.
+.PP
+.RS
+pprof2calltree -f pprof.12345.1
+.br
+kcachegrind cachegrind.out.12345.1
+.RE
+.PP
+.SH SEE ALSO
+.BR kcachegrind (1).
+.SH AUTHOR
+This converter was written by George Schlossnagle <george at omniti.com>.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Copied: trunk/packages/kdesdk/debian/man/umbrello.1 (from rev 16214, tags/packages/kdesdk/kdesdk-3.5.9-2/debian/man/umbrello.1)
===================================================================
--- trunk/packages/kdesdk/debian/man/umbrello.1	                        (rev 0)
+++ trunk/packages/kdesdk/debian/man/umbrello.1	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1,53 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH UMBRELLO 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+umbrello \- a UML modelling tool and code generator
+.SH SYNOPSIS
+.B umbrello
+.RI "[ " generic-options " ]"
+[ \fIfile\fP ]
+.SH DESCRIPTION
+\fBUmbrello UML Modeller\fP is a Unified Modelling Language editor for KDE.
+With UML you can create diagrams of software and other systems in an
+industry standard format.  Umbrello can also generate code from your
+UML diagrams in a number of programming languages.
+.PP
+The program supports class diagrams, sequence diagrams, collaboration
+diagrams, use case diagrams, state diagrams, activity diagrams, component
+diagrams and deployment diagrams.
+.PP
+This application is part of the KDE Software Development Kit.
+.SH OPTIONS
+For a full summary of options, run \fIumbrello \-\-help\fP.
+.SH SEE ALSO
+Full user documentation is available through the KDE Help Centre.
+You can also enter the URL
+\fIhelp:/umbrello/\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/umbrello/\fP'
+from the command-line.
+.PP
+If the KDE Help Centre is not installed then you can install the package
+\fIkdesdk-doc-html\fP and read this documentation in HTML format from
+\fI/usr/share/doc/kde/HTML/en/umbrello/\fP.
+.SH AUTHOR
+Umbrello was written by Paul Hensgen <phensgen at users.sourceforge.net> and
+many others.
+.br
+This manual page was prepared by Ben Burton <bab at debian.org>
+for the Debian GNU/Linux system (but may be used by others).

Added: trunk/packages/kdesdk/debian/umbrello.manpages
===================================================================
--- trunk/packages/kdesdk/debian/umbrello.manpages	                        (rev 0)
+++ trunk/packages/kdesdk/debian/umbrello.manpages	2009-11-08 12:53:16 UTC (rev 16215)
@@ -0,0 +1 @@
+debian/man/umbrello.1




More information about the pkg-kde-commits mailing list